| [ 0.000000] Linux version 5.0.0-21-generic (buildd@lgw01-amd64-036) (gcc version 8.3.0 (Ubuntu 8.3.0-6ubuntu1)) #22-Ubuntu SMP Tue Jul 2 13:27:33 UTC 2019 (Ubuntu 5.0.0-21.22-generic 5.0.15) |
| [ 0.000000] Command line: BOOT_IMAGE=/vmlinuz-5.0.0-21-generic root=/dev/mapper/ubuntu--vg-root ro quiet splash iomem=relaxed vt.handoff=1 |
| [ 0.000000] KERNEL supported cpus: |
| [ 0.000000] Intel GenuineIntel |
| [ 0.000000] AMD AuthenticAMD |
| [ 0.000000] Hygon HygonGenuine |
| [ 0.000000] Centaur CentaurHauls |
| [ 0.000000] x86/fpu: Supporting XSAVE feature 0x001: 'x87 floating point registers' |
| [ 0.000000] x86/fpu: Supporting XSAVE feature 0x002: 'SSE registers' |
| [ 0.000000] x86/fpu: Supporting XSAVE feature 0x004: 'AVX registers' |
| [ 0.000000] x86/fpu: xstate_offset[2]: 576, xstate_sizes[2]: 256 |
| [ 0.000000] x86/fpu: Enabled xstate features 0x7, context size is 832 bytes, using 'standard' format. |
| [ 0.000000] BIOS-provided physical RAM map: |
| [ 0.000000] BIOS-e820: [mem 0x0000000000001000-0x000000000009ffff] usable |
| [ 0.000000] BIOS-e820: [mem 0x00000000000a0000-0x00000000000fffff] reserved |
| [ 0.000000] BIOS-e820: [mem 0x0000000000100000-0x000000007faadfff] usable |
| [ 0.000000] BIOS-e820: [mem 0x000000007faae000-0x000000007fb2dfff] type 20 |
| [ 0.000000] BIOS-e820: [mem 0x000000007fb2e000-0x000000007fbf1fff] reserved |
| [ 0.000000] BIOS-e820: [mem 0x000000007fbf2000-0x000000007fbfcfff] usable |
| [ 0.000000] BIOS-e820: [mem 0x000000007fbfd000-0x000000007fbfdfff] ACPI data |
| [ 0.000000] BIOS-e820: [mem 0x000000007fbfe000-0x000000007ff30fff] usable |
| [ 0.000000] BIOS-e820: [mem 0x000000007ff31000-0x000000007fffffff] reserved |
| [ 0.000000] BIOS-e820: [mem 0x0000000100000000-0x000000047b5fffff] usable |
| [ 0.000000] NX (Execute Disable) protection: active |
| [ 0.000000] efi: EFI v2.70 by EDK II |
| [ 0.000000] efi: ACPI 2.0=0x7ff43000 SMBIOS=0x7ff31000 |
| [ 0.000000] secureboot: Secure boot could not be determined (mode 0) |
| [ 0.000000] SMBIOS 2.8 present. |
| [ 0.000000] DMI: HP EliteBook 8460p/EliteBook 8460p, BIOS 4.10-91-g1a64194307 07/28/2019 |
| [ 0.000000] tsc: Fast TSC calibration using PIT |
| [ 0.000000] tsc: Detected 2693.982 MHz processor |
| [ 0.000022] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved |
| [ 0.000025] e820: remove [mem 0x000a0000-0x000fffff] usable |
| [ 0.000033] last_pfn = 0x47b600 max_arch_pfn = 0x400000000 |
| [ 0.000042] MTRR default type: write-back |
| [ 0.000044] MTRR fixed ranges enabled: |
| [ 0.000047] 00000-9FFFF write-back |
| [ 0.000048] A0000-BFFFF uncachable |
| [ 0.000050] C0000-FFFFF write-back |
| [ 0.000052] MTRR variable ranges enabled: |
| [ 0.000055] 0 base 080000000 mask FC0000000 uncachable |
| [ 0.000057] 1 base 0C0000000 mask FF0000000 uncachable |
| [ 0.000058] 2 base 0D0000000 mask FF0000000 write-combining |
| [ 0.000060] 3 base 0E0000000 mask FE0000000 uncachable |
| [ 0.000061] 4 disabled |
| [ 0.000062] 5 disabled |
| [ 0.000063] 6 disabled |
| [ 0.000064] 7 disabled |
| [ 0.000065] 8 disabled |
| [ 0.000066] 9 disabled |
| [ 0.002097] x86/PAT: Configuration [0-7]: WB WC UC- UC WB WP UC- WT |
| [ 0.002409] last_pfn = 0x7ff31 max_arch_pfn = 0x400000000 |
| [ 0.025199] check: Scanning 1 areas for low memory corruption |
| [ 0.025210] BRK [0x21d401000, 0x21d401fff] PGTABLE |
| [ 0.025214] BRK [0x21d402000, 0x21d402fff] PGTABLE |
| [ 0.025216] BRK [0x21d403000, 0x21d403fff] PGTABLE |
| [ 0.025271] BRK [0x21d404000, 0x21d404fff] PGTABLE |
| [ 0.025276] BRK [0x21d405000, 0x21d405fff] PGTABLE |
| [ 0.025442] BRK [0x21d406000, 0x21d406fff] PGTABLE |
| [ 0.025481] BRK [0x21d407000, 0x21d407fff] PGTABLE |
| [ 0.025591] BRK [0x21d408000, 0x21d408fff] PGTABLE |
| [ 0.025997] RAMDISK: [mem 0x300d3000-0x34060fff] |
| [ 0.026010] ACPI: Early table checksum verification disabled |
| [ 0.026015] ACPI: RSDP 0x000000007FF43000 000024 (v02 COREv4) |
| [ 0.026022] ACPI: XSDT 0x000000007FBFDF18 000064 (v01 COREv4 COREBOOT 00000000 CORE 20190703) |
| [ 0.026034] ACPI: FACP 0x000000007FF46600 0000F4 (v04 COREv4 COREBOOT 00000000 CORE 20190703) |
| [ 0.026045] ACPI: DSDT 0x000000007FF43280 00337B (v02 COREv4 COREBOOT 20141018 INTL 20190703) |
| [ 0.026051] ACPI: FACS 0x000000007FF43240 000040 |
| [ 0.026056] ACPI: FACS 0x000000007FF43240 000040 |
| [ 0.026061] ACPI: SSDT 0x000000007FF46700 00314B (v02 COREv4 COREBOOT 0000002A CORE 20190703) |
| [ 0.026067] ACPI: MCFG 0x000000007FF49850 00003C (v01 COREv4 COREBOOT 00000000 CORE 20190703) |
| [ 0.026072] ACPI: TCPA 0x000000007FF49890 000032 (v02 COREv4 COREBOOT 00000000 CORE 20190703) |
| [ 0.026078] ACPI: APIC 0x000000007FF498D0 00008C (v02 COREv4 COREBOOT 00000000 CORE 20190703) |
| [ 0.026084] ACPI: DMAR 0x000000007FF49960 0000D0 (v01 COREv4 COREBOOT 00000000 CORE 20190703) |
| [ 0.026089] ACPI: HPET 0x000000007FF4BA30 000038 (v01 COREv4 COREBOOT 00000000 CORE 20190703) |
| [ 0.026095] ACPI: BGRT 0x000000007FBFD018 000038 (v00 INTEL EDK2 00001720 PTL 00000002) |
| [ 0.026111] ACPI: Local APIC address 0xfee00000 |
| [ 0.026287] No NUMA configuration found |
| [ 0.026289] Faking a node at [mem 0x0000000000000000-0x000000047b5fffff] |
| [ 0.026310] NODE_DATA(0) allocated [mem 0x47b5c8000-0x47b5f2fff] |
| [ 0.026938] Zone ranges: |
| [ 0.026940] DMA [mem 0x0000000000001000-0x0000000000ffffff] |
| [ 0.026942] DMA32 [mem 0x0000000001000000-0x00000000ffffffff] |
| [ 0.026944] Normal [mem 0x0000000100000000-0x000000047b5fffff] |
| [ 0.026945] Device empty |
| [ 0.026947] Movable zone start for each node |
| [ 0.026954] Early memory node ranges |
| [ 0.026956] node 0: [mem 0x0000000000001000-0x000000000009ffff] |
| [ 0.026957] node 0: [mem 0x0000000000100000-0x000000007faadfff] |
| [ 0.026959] node 0: [mem 0x000000007fbf2000-0x000000007fbfcfff] |
| [ 0.026960] node 0: [mem 0x000000007fbfe000-0x000000007ff30fff] |
| [ 0.026961] node 0: [mem 0x0000000100000000-0x000000047b5fffff] |
| [ 0.026997] Zeroed struct page in unavailable ranges: 629 pages |
| [ 0.027000] Initmem setup node 0 [mem 0x0000000000001000-0x000000047b5fffff] |
| [ 0.027003] On node 0 totalpages: 4174731 |
| [ 0.027005] DMA zone: 64 pages used for memmap |
| [ 0.027006] DMA zone: 1064 pages reserved |
| [ 0.027008] DMA zone: 3999 pages, LIFO batch:0 |
| [ 0.027237] DMA32 zone: 8120 pages used for memmap |
| [ 0.027238] DMA32 zone: 519660 pages, LIFO batch:63 |
| [ 0.059926] Normal zone: 57048 pages used for memmap |
| [ 0.059929] Normal zone: 3651072 pages, LIFO batch:63 |
| [ 0.261156] Reserving Intel graphics memory at [mem 0x80a00000-0x829fffff] |
| [ 0.261529] ACPI: PM-Timer IO Port: 0x508 |
| [ 0.261533] ACPI: Local APIC address 0xfee00000 |
| [ 0.261560] IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-23 |
| [ 0.261564] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) |
| [ 0.261567] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level) |
| [ 0.261569] ACPI: IRQ0 used by override. |
| [ 0.261572] ACPI: IRQ9 used by override. |
| [ 0.261576] Using ACPI (MADT) for SMP configuration information |
| [ 0.261578] ACPI: HPET id: 0x8086a701 base: 0xfed00000 |
| [ 0.261600] smpboot: Allowing 8 CPUs, 0 hotplug CPUs |
| [ 0.261622] PM: Registered nosave memory: [mem 0x00000000-0x00000fff] |
| [ 0.261625] PM: Registered nosave memory: [mem 0x000a0000-0x000fffff] |
| [ 0.261628] PM: Registered nosave memory: [mem 0x7faae000-0x7fb2dfff] |
| [ 0.261629] PM: Registered nosave memory: [mem 0x7fb2e000-0x7fbf1fff] |
| [ 0.261631] PM: Registered nosave memory: [mem 0x7fbfd000-0x7fbfdfff] |
| [ 0.261634] PM: Registered nosave memory: [mem 0x7ff31000-0x7fffffff] |
| [ 0.261635] PM: Registered nosave memory: [mem 0x80000000-0x809fffff] |
| [ 0.261636] PM: Registered nosave memory: [mem 0x80a00000-0x829fffff] |
| [ 0.261637] PM: Registered nosave memory: [mem 0x82a00000-0xffffffff] |
| [ 0.261641] [mem 0x82a00000-0xffffffff] available for PCI devices |
| [ 0.261643] Booting paravirtualized kernel on bare hardware |
| [ 0.261647] clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645519600211568 ns |
| [ 0.261665] random: get_random_bytes called from start_kernel+0x97/0x516 with crng_init=0 |
| [ 0.261676] setup_percpu: NR_CPUS:8192 nr_cpumask_bits:8 nr_cpu_ids:8 nr_node_ids:1 |
| [ 0.262066] percpu: Embedded 46 pages/cpu s151552 r8192 d28672 u262144 |
| [ 0.262077] pcpu-alloc: s151552 r8192 d28672 u262144 alloc=1*2097152 |
| [ 0.262078] pcpu-alloc: [0] 0 1 2 3 4 5 6 7 |
| [ 0.262122] Built 1 zonelists, mobility grouping on. Total pages: 4108435 |
| [ 0.262124] Policy zone: Normal |
| [ 0.262126] Kernel command line: BOOT_IMAGE=/vmlinuz-5.0.0-21-generic root=/dev/mapper/ubuntu--vg-root ro quiet splash iomem=relaxed vt.handoff=1 |
| [ 0.269685] Calgary: detecting Calgary via BIOS EBDA area |
| [ 0.269688] Calgary: Unable to locate Rio Grande table in EBDA - bailing! |
| [ 0.346101] Memory: 16244020K/16698924K available (14339K kernel code, 2335K rwdata, 4296K rodata, 2576K init, 5204K bss, 454904K reserved, 0K cma-reserved) |
| [ 0.346350] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=8, Nodes=1 |
| [ 0.346361] Kernel/User page tables isolation: enabled |
| [ 0.346392] ftrace: allocating 41561 entries in 163 pages |
| [ 0.381236] rcu: Hierarchical RCU implementation. |
| [ 0.381239] rcu: RCU restricting CPUs from NR_CPUS=8192 to nr_cpu_ids=8. |
| [ 0.381241] Tasks RCU enabled. |
| [ 0.381242] rcu: RCU calculated value of scheduler-enlistment delay is 25 jiffies. |
| [ 0.381244] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=8 |
| [ 0.387768] NR_IRQS: 524544, nr_irqs: 488, preallocated irqs: 16 |
| [ 0.388162] vt handoff: transparent VT on vt#1 |
| [ 0.388173] Console: colour dummy device 80x25 |
| [ 0.388181] printk: console [tty0] enabled |
| [ 0.388210] ACPI: Core revision 20181213 |
| [ 0.388442] clocksource: hpet: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 133484882848 ns |
| [ 0.388457] hpet clockevent registered |
| [ 0.388487] APIC: Switch to symmetric I/O mode setup |
| [ 0.388490] DMAR: Host address width 36 |
| [ 0.388492] DMAR: DRHD base: 0x000000fed90000 flags: 0x0 |
| [ 0.388502] DMAR: dmar0: reg_base_addr fed90000 ver 1:0 cap c0000020e60262 ecap f0101a |
| [ 0.388503] DMAR: RMRR base: 0x00000080800000 end: 0x000000829fffff |
| [ 0.388505] DMAR: DRHD base: 0x000000fed91000 flags: 0x1 |
| [ 0.388511] DMAR: dmar1: reg_base_addr fed91000 ver 1:0 cap c9008020660262 ecap f0105a |
| [ 0.388514] DMAR-IR: IOAPIC id 2 under DRHD base 0xfed91000 IOMMU 1 |
| [ 0.388515] DMAR-IR: HPET id 0 under DRHD base 0xfed91000 |
| [ 0.388517] DMAR-IR: Queued invalidation will be enabled to support x2apic and Intr-remapping. |
| [ 0.389182] DMAR-IR: Enabled IRQ remapping in x2apic mode |
| [ 0.389185] x2apic enabled |
| [ 0.389194] Switched APIC routing to cluster x2apic. |
| [ 0.389835] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1 |
| [ 0.408465] clocksource: tsc-early: mask: 0xffffffffffffffff max_cycles: 0x26d5097f448, max_idle_ns: 440795207858 ns |
| [ 0.408492] Calibrating delay loop (skipped), value calculated using timer frequency.. 5387.96 BogoMIPS (lpj=10775928) |
| [ 0.408496] pid_max: default: 32768 minimum: 301 |
| [ 0.410836] LSM: Security Framework initializing |
| [ 0.410855] Yama: becoming mindful. |
| [ 0.410892] AppArmor: AppArmor initialized |
| [ 0.415073] Dentry cache hash table entries: 2097152 (order: 12, 16777216 bytes) |
| [ 0.417161] Inode-cache hash table entries: 1048576 (order: 11, 8388608 bytes) |
| [ 0.417246] Mount-cache hash table entries: 32768 (order: 6, 262144 bytes) |
| [ 0.417312] Mountpoint-cache hash table entries: 32768 (order: 6, 262144 bytes) |
| [ 0.417741] mce: CPU supports 9 MCE banks |
| [ 0.417761] mce: CPU0: Thermal monitoring enabled (TM1) |
| [ 0.417785] process: using mwait in idle threads |
| [ 0.417790] Last level iTLB entries: 4KB 512, 2MB 8, 4MB 8 |
| [ 0.417791] Last level dTLB entries: 4KB 512, 2MB 32, 4MB 32, 1GB 0 |
| [ 0.417794] Spectre V2 : Mitigation: Full generic retpoline |
| [ 0.417796] Spectre V2 : Spectre v2 / SpectreRSB mitigation: Filling RSB on context switch |
| [ 0.417796] Spectre V2 : Enabling Restricted Speculation for firmware calls |
| [ 0.417813] Spectre V2 : mitigation: Enabling conditional Indirect Branch Prediction Barrier |
| [ 0.417814] Spectre V2 : User space: Mitigation: STIBP via seccomp and prctl |
| [ 0.417817] Speculative Store Bypass: Mitigation: Speculative Store Bypass disabled via prctl and seccomp |
| [ 0.417882] MDS: Mitigation: Clear CPU buffers |
| [ 0.418222] Freeing SMP alternatives memory: 36K |
| [ 0.422137] TSC deadline timer enabled |
| [ 0.422141] smpboot: CPU0: Intel(R) Core(TM) i7-3740QM CPU @ 2.70GHz (family: 0x6, model: 0x3a, stepping: 0x9) |
| [ 0.422347] Performance Events: PEBS fmt1+, IvyBridge events, 16-deep LBR, full-width counters, Intel PMU driver. |
| [ 0.422389] ... version: 3 |
| [ 0.422390] ... bit width: 48 |
| [ 0.422390] ... generic registers: 4 |
| [ 0.422392] ... value mask: 0000ffffffffffff |
| [ 0.422393] ... max period: 00007fffffffffff |
| [ 0.422394] ... fixed-purpose events: 3 |
| [ 0.422395] ... event mask: 000000070000000f |
| [ 0.422465] rcu: Hierarchical SRCU implementation. |
| [ 0.423661] random: crng done (trusting CPU's manufacturer) |
| [ 0.424468] NMI watchdog: Enabled. Permanently consumes one hw-PMU counter. |
| [ 0.424468] smp: Bringing up secondary CPUs ... |
| [ 0.424468] x86: Booting SMP configuration: |
| [ 0.424468] .... node #0, CPUs: #1 |
| [ 0.427265] MDS CPU bug present and SMT on, data leak possible. See https://www.kernel.org/doc/html/latest/admin-guide/hw-vuln/mds.html for more details. |
| [ 0.427265] #2 #3 #4 #5 #6 #7 |
| [ 0.451686] smp: Brought up 1 node, 8 CPUs |
| [ 0.451686] smpboot: Max logical packages: 1 |
| [ 0.451686] smpboot: Total of 8 processors activated (43103.71 BogoMIPS) |
| [ 0.453306] devtmpfs: initialized |
| [ 0.453306] x86/mm: Memory block size: 128MB |
| [ 0.454946] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns |
| [ 0.454946] futex hash table entries: 2048 (order: 5, 131072 bytes) |
| [ 0.454946] pinctrl core: initialized pinctrl subsystem |
| [ 0.456624] RTC time: 17:43:47, date: 2019-07-28 |
| [ 0.456864] NET: Registered protocol family 16 |
| [ 0.457050] audit: initializing netlink subsys (disabled) |
| [ 0.457064] audit: type=2000 audit(1564335827.072:1): state=initialized audit_enabled=0 res=1 |
| [ 0.457064] EISA bus registered |
| [ 0.457064] cpuidle: using governor ladder |
| [ 0.457064] cpuidle: using governor menu |
| [ 0.457064] ACPI: bus type PCI registered |
| [ 0.457064] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5 |
| [ 0.457064] PCI: MMCONFIG for domain 0000 [bus 00-3f] at [mem 0xf0000000-0xf3ffffff] (base 0xf0000000) |
| [ 0.457064] PCI: not using MMCONFIG |
| [ 0.457064] PCI: Using configuration type 1 for base access |
| [ 0.457064] core: PMU erratum BJ122, BV98, HSD29 worked around, HT is on |
| [ 0.460540] HugeTLB registered 2.00 MiB page size, pre-allocated 0 pages |
| [ 0.460628] ACPI: Added _OSI(Module Device) |
| [ 0.460630] ACPI: Added _OSI(Processor Device) |
| [ 0.460631] ACPI: Added _OSI(3.0 _SCP Extensions) |
| [ 0.460633] ACPI: Added _OSI(Processor Aggregator Device) |
| [ 0.460635] ACPI: Added _OSI(Linux-Dell-Video) |
| [ 0.460637] ACPI: Added _OSI(Linux-Lenovo-NV-HDMI-Audio) |
| [ 0.460638] ACPI: Added _OSI(Linux-HPI-Hybrid-Graphics) |
| [ 0.470408] ACPI: 2 ACPI AML tables successfully acquired and loaded |
| [ 0.473138] ACPI: EC: EC started |
| [ 0.473140] ACPI: EC: interrupt blocked |
| [ 0.485918] ACPI: \_SB_.PCI0.LPCB.EC0_: Used as first EC |
| [ 0.485922] ACPI: \_SB_.PCI0.LPCB.EC0_: GPE=0x16, EC_CMD/EC_SC=0x66, EC_DATA=0x62 |
| [ 0.485925] ACPI: \_SB_.PCI0.LPCB.EC0_: Used as boot DSDT EC to handle transactions |
| [ 0.485926] ACPI: Interpreter enabled |
| [ 0.485971] ACPI: (supports S0 S3 S4 S5) |
| [ 0.485973] ACPI: Using IOAPIC for interrupt routing |
| [ 0.486020] PCI: MMCONFIG for domain 0000 [bus 00-3f] at [mem 0xf0000000-0xf3ffffff] (base 0xf0000000) |
| [ 0.488636] [Firmware Info]: PCI: MMCONFIG at [mem 0xf0000000-0xf3ffffff] not reserved in ACPI motherboard resources |
| [ 0.488638] PCI: not using MMCONFIG |
| [ 0.488643] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug |
| [ 0.489002] ACPI: Enabled 1 GPEs in block 00 to 3F |
| [ 0.497960] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff]) |
| [ 0.497969] acpi PNP0A08:00: _OSC: OS supports [ASPM ClockPM Segments MSI] |
| [ 0.498024] acpi PNP0A08:00: _OSC: not requesting OS control; OS requires [ExtendedConfig ASPM ClockPM MSI] |
| [ 0.498047] acpi PNP0A08:00: fail to add MMCONFIG information, can't access extended PCI configuration space under this bridge. |
| [ 0.498599] PCI host bridge to bus 0000:00 |
| [ 0.498604] pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7 window] |
| [ 0.498606] pci_bus 0000:00: root bus resource [io 0x0d00-0xffff window] |
| [ 0.498608] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff window] |
| [ 0.498611] pci_bus 0000:00: root bus resource [mem 0x000c0000-0x000c3fff window] |
| [ 0.498613] pci_bus 0000:00: root bus resource [mem 0x000c4000-0x000c7fff window] |
| [ 0.498615] pci_bus 0000:00: root bus resource [mem 0x000c8000-0x000cbfff window] |
| [ 0.498617] pci_bus 0000:00: root bus resource [mem 0x000cc000-0x000cffff window] |
| [ 0.498622] pci_bus 0000:00: root bus resource [mem 0x000d0000-0x000d3fff window] |
| [ 0.498624] pci_bus 0000:00: root bus resource [mem 0x000d4000-0x000d7fff window] |
| [ 0.498626] pci_bus 0000:00: root bus resource [mem 0x000d8000-0x000dbfff window] |
| [ 0.498629] pci_bus 0000:00: root bus resource [mem 0x000dc000-0x000dffff window] |
| [ 0.498631] pci_bus 0000:00: root bus resource [mem 0x000e0000-0x000e3fff window] |
| [ 0.498633] pci_bus 0000:00: root bus resource [mem 0x000e4000-0x000e7fff window] |
| [ 0.498635] pci_bus 0000:00: root bus resource [mem 0x000e8000-0x000ebfff window] |
| [ 0.498637] pci_bus 0000:00: root bus resource [mem 0x000ec000-0x000effff window] |
| [ 0.498639] pci_bus 0000:00: root bus resource [mem 0x000f0000-0x000fffff window] |
| [ 0.498642] pci_bus 0000:00: root bus resource [mem 0x82a00001-0xefffffff window] |
| [ 0.498644] pci_bus 0000:00: root bus resource [mem 0xfed40000-0xfed44fff window] |
| [ 0.498647] pci_bus 0000:00: root bus resource [bus 00-ff] |
| [ 0.498660] pci 0000:00:00.0: [8086:0154] type 00 class 0x060000 |
| [ 0.498857] pci 0000:00:01.0: [8086:0151] type 01 class 0x060400 |
| [ 0.498922] pci 0000:00:01.0: PME# supported from D0 D3hot D3cold |
| [ 0.499091] pci 0000:00:02.0: [8086:0166] type 00 class 0x030000 |
| [ 0.499113] pci 0000:00:02.0: reg 0x10: [mem 0xe2400000-0xe27fffff 64bit] |
| [ 0.499124] pci 0000:00:02.0: reg 0x18: [mem 0xd0000000-0xdfffffff 64bit pref] |
| [ 0.499132] pci 0000:00:02.0: reg 0x20: [io 0x3000-0x303f] |
| [ 0.499154] pci 0000:00:02.0: BAR 2: assigned to efifb |
| [ 0.499306] pci 0000:00:04.0: [8086:0153] type 00 class 0x118000 |
| [ 0.499325] pci 0000:00:04.0: reg 0x10: [mem 0xe2920000-0xe2927fff 64bit] |
| [ 0.499620] pci 0000:00:16.0: [8086:1c3a] type 00 class 0x078000 |
| [ 0.499850] pci 0000:00:16.0: reg 0x10: [mem 0xe2931000-0xe293100f 64bit] |
| [ 0.500605] pci 0000:00:16.0: PME# supported from D0 D3hot D3cold |
| [ 0.500902] pci 0000:00:19.0: [8086:1502] type 00 class 0x020000 |
| [ 0.500945] pci 0000:00:19.0: reg 0x10: [mem 0xe2900000-0xe291ffff] |
| [ 0.500961] pci 0000:00:19.0: reg 0x14: [mem 0xe292d000-0xe292dfff] |
| [ 0.500978] pci 0000:00:19.0: reg 0x18: [io 0x3040-0x305f] |
| [ 0.501107] pci 0000:00:19.0: PME# supported from D0 D3hot D3cold |
| [ 0.501266] pci 0000:00:1a.0: [8086:1c2d] type 00 class 0x0c0320 |
| [ 0.501306] pci 0000:00:1a.0: reg 0x10: [mem 0xe292f000-0xe292f3ff] |
| [ 0.501465] pci 0000:00:1a.0: PME# supported from D0 D3hot D3cold |
| [ 0.501645] pci 0000:00:1b.0: [8086:1c20] type 00 class 0x040300 |
| [ 0.501684] pci 0000:00:1b.0: reg 0x10: [mem 0xe2928000-0xe292bfff 64bit] |
| [ 0.501832] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold |
| [ 0.501995] pci 0000:00:1c.0: [8086:1c10] type 01 class 0x060400 |
| [ 0.502154] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold |
| [ 0.502330] pci 0000:00:1c.1: [8086:1c12] type 01 class 0x060400 |
| [ 0.502495] pci 0000:00:1c.1: PME# supported from D0 D3hot D3cold |
| [ 0.502672] pci 0000:00:1c.2: [8086:1c14] type 01 class 0x060400 |
| [ 0.502835] pci 0000:00:1c.2: PME# supported from D0 D3hot D3cold |
| [ 0.503012] pci 0000:00:1c.3: [8086:1c16] type 01 class 0x060400 |
| [ 0.503170] pci 0000:00:1c.3: PME# supported from D0 D3hot D3cold |
| [ 0.503348] pci 0000:00:1c.4: [8086:1c1c] type 01 class 0x060400 |
| [ 0.503507] pci 0000:00:1c.4: PME# supported from D0 D3hot D3cold |
| [ 0.503688] pci 0000:00:1c.6: [8086:1c1e] type 01 class 0x060400 |
| [ 0.503846] pci 0000:00:1c.6: PME# supported from D0 D3hot D3cold |
| [ 0.504027] pci 0000:00:1d.0: [8086:1c26] type 00 class 0x0c0320 |
| [ 0.504067] pci 0000:00:1d.0: reg 0x10: [mem 0xe2930000-0xe29303ff] |
| [ 0.504226] pci 0000:00:1d.0: PME# supported from D0 D3hot D3cold |
| [ 0.504394] pci 0000:00:1f.0: [8086:1c4f] type 00 class 0x060100 |
| [ 0.504716] pci 0000:00:1f.2: [8086:1c03] type 00 class 0x010601 |
| [ 0.504758] pci 0000:00:1f.2: reg 0x10: [io 0x3088-0x308f] |
| [ 0.504775] pci 0000:00:1f.2: reg 0x14: [io 0x3098-0x309b] |
| [ 0.504792] pci 0000:00:1f.2: reg 0x18: [io 0x3090-0x3097] |
| [ 0.504807] pci 0000:00:1f.2: reg 0x1c: [io 0x309c-0x309f] |
| [ 0.504824] pci 0000:00:1f.2: reg 0x20: [io 0x3060-0x307f] |
| [ 0.504841] pci 0000:00:1f.2: reg 0x24: [mem 0xe292e000-0xe292e7ff] |
| [ 0.504936] pci 0000:00:1f.2: PME# supported from D3hot |
| [ 0.505167] pci 0000:00:01.0: PCI bridge to [bus 01] |
| [ 0.505252] pci 0000:00:1c.0: PCI bridge to [bus 02] |
| [ 0.505401] acpiphp: Slot [1] registered |
| [ 0.505410] pci 0000:00:1c.1: PCI bridge to [bus 03] |
| [ 0.505416] pci 0000:00:1c.1: bridge window [io 0x1000-0x1fff] |
| [ 0.505423] pci 0000:00:1c.1: bridge window [mem 0xe1400000-0xe1bfffff] |
| [ 0.505434] pci 0000:00:1c.1: bridge window [mem 0xe0c00000-0xe13fffff 64bit pref] |
| [ 0.505560] acpiphp: Slot [1-1] registered |
| [ 0.505602] pci 0000:04:00.0: [197b:2380] type 00 class 0x0c0010 |
| [ 0.505658] pci 0000:04:00.0: reg 0x10: [mem 0xe0810000-0xe08107ff] |
| [ 0.505688] pci 0000:04:00.0: reg 0x14: [mem 0xe0811000-0xe08110ff] |
| [ 0.506098] pci 0000:04:00.1: [197b:2392] type 00 class 0x088000 |
| [ 0.506139] pci 0000:04:00.1: reg 0x10: [mem 0xe0812000-0xe08120ff] |
| [ 0.506262] pci 0000:04:00.1: reg 0x30: [mem 0xe0800000-0xe080ffff pref] |
| [ 0.506482] pci 0000:04:00.2: [197b:2391] type 00 class 0x080501 |
| [ 0.506523] pci 0000:04:00.2: reg 0x10: [mem 0xe0813000-0xe08130ff] |
| [ 0.506862] pci 0000:04:00.3: [197b:2393] type 00 class 0x088000 |
| [ 0.506903] pci 0000:04:00.3: reg 0x10: [mem 0xe0814000-0xe08140ff] |
| [ 0.507241] pci 0000:04:00.4: [197b:2394] type 00 class 0x088000 |
| [ 0.507282] pci 0000:04:00.4: reg 0x10: [mem 0xe0815000-0xe08150ff] |
| [ 0.507676] pci 0000:00:1c.2: PCI bridge to [bus 04] |
| [ 0.507682] pci 0000:00:1c.2: bridge window [io 0x2000-0x2fff] |
| [ 0.507689] pci 0000:00:1c.2: bridge window [mem 0xe0000000-0xe08fffff] |
| [ 0.507699] pci 0000:00:1c.2: bridge window [mem 0xe1c00000-0xe23fffff 64bit pref] |
| [ 0.507779] pci 0000:00:1c.3: PCI bridge to [bus 05] |
| [ 0.507876] pci 0000:00:1c.4: PCI bridge to [bus 06] |
| [ 0.508013] pci 0000:07:00.0: [1033:0194] type 00 class 0x0c0330 |
| [ 0.508086] pci 0000:07:00.0: reg 0x10: [mem 0xe2800000-0xe2801fff 64bit] |
| [ 0.508412] pci 0000:07:00.0: PME# supported from D0 D3hot D3cold |
| [ 0.508611] pci 0000:00:1c.6: PCI bridge to [bus 07] |
| [ 0.508622] pci 0000:00:1c.6: bridge window [mem 0xe2800000-0xe28fffff] |
| [ 0.509145] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 10 *11 12 14 15) |
| [ 0.509286] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 10 *11 12 14 15) |
| [ 0.509421] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 7 10 *11 12 14 15) |
| [ 0.509555] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 10 *11 12 14 15) |
| [ 0.509688] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 10 *11 12 14 15) |
| [ 0.509822] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 10 *11 12 14 15) |
| [ 0.509955] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 7 10 *11 12 14 15) |
| [ 0.510088] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 7 10 *11 12 14 15) |
| [ 0.511140] ACPI: EC: interrupt unblocked |
| [ 0.511140] ACPI: EC: event unblocked |
| [ 0.511140] ACPI: \_SB_.PCI0.LPCB.EC0_: GPE=0x16, EC_CMD/EC_SC=0x66, EC_DATA=0x62 |
| [ 0.511140] ACPI: \_SB_.PCI0.LPCB.EC0_: Used as boot DSDT EC to handle transactions and events |
| [ 0.511145] SCSI subsystem initialized |
| [ 0.511145] libata version 3.00 loaded. |
| [ 0.511145] pci 0000:00:02.0: vgaarb: setting as boot VGA device |
| [ 0.511145] pci 0000:00:02.0: vgaarb: VGA device added: decodes=io+mem,owns=io+mem,locks=none |
| [ 0.511145] pci 0000:00:02.0: vgaarb: bridge control possible |
| [ 0.511145] vgaarb: loaded |
| [ 0.511145] ACPI: bus type USB registered |
| [ 0.511145] usbcore: registered new interface driver usbfs |
| [ 0.511145] usbcore: registered new interface driver hub |
| [ 0.511145] usbcore: registered new device driver usb |
| [ 0.511145] pps_core: LinuxPPS API ver. 1 registered |
| [ 0.511145] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it> |
| [ 0.511145] PTP clock support registered |
| [ 0.511145] EDAC MC: Ver: 3.0.0 |
| [ 0.512527] Registered efivars operations |
| [ 0.512534] PCI: Using ACPI for IRQ routing |
| [ 0.512534] PCI: pci_cache_line_size set to 64 bytes |
| [ 0.512652] e820: reserve RAM buffer [mem 0x7faae000-0x7fffffff] |
| [ 0.512655] e820: reserve RAM buffer [mem 0x7fbfd000-0x7fffffff] |
| [ 0.512656] e820: reserve RAM buffer [mem 0x7ff31000-0x7fffffff] |
| [ 0.512658] e820: reserve RAM buffer [mem 0x47b600000-0x47bffffff] |
| [ 0.512832] NetLabel: Initializing |
| [ 0.512833] NetLabel: domain hash size = 128 |
| [ 0.512834] NetLabel: protocols = UNLABELED CIPSOv4 CALIPSO |
| [ 0.512861] NetLabel: unlabeled traffic allowed by default |
| [ 0.513597] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0, 0, 0, 0, 0 |
| [ 0.513606] hpet0: 8 comparators, 64-bit 14.318180 MHz counter |
| [ 0.516513] clocksource: Switched to clocksource tsc-early |
| [ 0.538821] VFS: Disk quotas dquot_6.6.0 |
| [ 0.538853] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes) |
| [ 0.539055] AppArmor: AppArmor Filesystem Enabled |
| [ 0.539104] pnp: PnP ACPI init |
| [ 0.539592] pnp 00:00: [Firmware Bug]: PNP resource [mem 0xf0000000-0x12fffffff] covers only part of 0000:00:00.0 Intel MCH; extending to [mem 0xfed10000-0xfed17fff] |
| [ 0.539634] system 00:00: [mem 0xfed1c000-0xfed1ffff] has been reserved |
| [ 0.539637] system 00:00: [mem 0xfed10000-0xfed17fff] has been reserved |
| [ 0.539639] system 00:00: [mem 0xfed18000-0xfed18fff] has been reserved |
| [ 0.539642] system 00:00: [mem 0xfed19000-0xfed19fff] has been reserved |
| [ 0.539644] system 00:00: [mem 0xfed10000-0xfed17fff] has been reserved |
| [ 0.539647] system 00:00: [mem 0xfed20000-0xfed3ffff] has been reserved |
| [ 0.539649] system 00:00: [mem 0xfed40000-0xfed44fff] has been reserved |
| [ 0.539652] system 00:00: [mem 0xfed45000-0xfed8ffff] has been reserved |
| [ 0.539655] system 00:00: [mem 0x20000000-0x201fffff] could not be reserved |
| [ 0.539657] system 00:00: [mem 0x40000000-0x401fffff] could not be reserved |
| [ 0.539667] system 00:00: Plug and Play ACPI device, IDs PNP0c02 (active) |
| [ 0.540564] system 00:01: [mem 0xfed00000-0xfed003ff] has been reserved |
| [ 0.540572] system 00:01: Plug and Play ACPI device, IDs PNP0103 PNP0c01 (active) |
| [ 0.540654] system 00:02: [io 0x0500-0x057f] has been reserved |
| [ 0.540657] system 00:02: [io 0x0480-0x04bf] has been reserved |
| [ 0.540664] system 00:02: Plug and Play ACPI device, IDs PNP0c02 (active) |
| [ 0.540702] pnp 00:03: Plug and Play ACPI device, IDs PNP0b00 (active) |
| [ 0.540769] pnp 00:04: Plug and Play ACPI device, IDs PNP0303 PNP030b (active) |
| [ 0.540823] pnp 00:05: Plug and Play ACPI device, IDs PNP0f13 (active) |
| [ 0.540876] pnp 00:06: Plug and Play ACPI device, IDs PNP0c31 (active) |
| [ 0.540925] pnp: PnP ACPI: found 7 devices |
| [ 0.547952] clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns |
| [ 0.548055] pci 0000:00:01.0: PCI bridge to [bus 01] |
| [ 0.548066] pci 0000:00:1c.0: PCI bridge to [bus 02] |
| [ 0.548088] pci 0000:00:1c.1: PCI bridge to [bus 03] |
| [ 0.548093] pci 0000:00:1c.1: bridge window [io 0x1000-0x1fff] |
| [ 0.548101] pci 0000:00:1c.1: bridge window [mem 0xe1400000-0xe1bfffff] |
| [ 0.548107] pci 0000:00:1c.1: bridge window [mem 0xe0c00000-0xe13fffff 64bit pref] |
| [ 0.548119] pci 0000:00:1c.2: PCI bridge to [bus 04] |
| [ 0.548123] pci 0000:00:1c.2: bridge window [io 0x2000-0x2fff] |
| [ 0.548132] pci 0000:00:1c.2: bridge window [mem 0xe0000000-0xe08fffff] |
| [ 0.548138] pci 0000:00:1c.2: bridge window [mem 0xe1c00000-0xe23fffff 64bit pref] |
| [ 0.548149] pci 0000:00:1c.3: PCI bridge to [bus 05] |
| [ 0.548170] pci 0000:00:1c.4: PCI bridge to [bus 06] |
| [ 0.548191] pci 0000:00:1c.6: PCI bridge to [bus 07] |
| [ 0.548200] pci 0000:00:1c.6: bridge window [mem 0xe2800000-0xe28fffff] |
| [ 0.548217] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7 window] |
| [ 0.548219] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff window] |
| [ 0.548222] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff window] |
| [ 0.548224] pci_bus 0000:00: resource 7 [mem 0x000c0000-0x000c3fff window] |
| [ 0.548226] pci_bus 0000:00: resource 8 [mem 0x000c4000-0x000c7fff window] |
| [ 0.548228] pci_bus 0000:00: resource 9 [mem 0x000c8000-0x000cbfff window] |
| [ 0.548231] pci_bus 0000:00: resource 10 [mem 0x000cc000-0x000cffff window] |
| [ 0.548233] pci_bus 0000:00: resource 11 [mem 0x000d0000-0x000d3fff window] |
| [ 0.548235] pci_bus 0000:00: resource 12 [mem 0x000d4000-0x000d7fff window] |
| [ 0.548237] pci_bus 0000:00: resource 13 [mem 0x000d8000-0x000dbfff window] |
| [ 0.548240] pci_bus 0000:00: resource 14 [mem 0x000dc000-0x000dffff window] |
| [ 0.548242] pci_bus 0000:00: resource 15 [mem 0x000e0000-0x000e3fff window] |
| [ 0.548244] pci_bus 0000:00: resource 16 [mem 0x000e4000-0x000e7fff window] |
| [ 0.548246] pci_bus 0000:00: resource 17 [mem 0x000e8000-0x000ebfff window] |
| [ 0.548249] pci_bus 0000:00: resource 18 [mem 0x000ec000-0x000effff window] |
| [ 0.548251] pci_bus 0000:00: resource 19 [mem 0x000f0000-0x000fffff window] |
| [ 0.548254] pci_bus 0000:00: resource 20 [mem 0x82a00001-0xefffffff window] |
| [ 0.548256] pci_bus 0000:00: resource 21 [mem 0xfed40000-0xfed44fff window] |
| [ 0.548259] pci_bus 0000:03: resource 0 [io 0x1000-0x1fff] |
| [ 0.548261] pci_bus 0000:03: resource 1 [mem 0xe1400000-0xe1bfffff] |
| [ 0.548263] pci_bus 0000:03: resource 2 [mem 0xe0c00000-0xe13fffff 64bit pref] |
| [ 0.548266] pci_bus 0000:04: resource 0 [io 0x2000-0x2fff] |
| [ 0.548268] pci_bus 0000:04: resource 1 [mem 0xe0000000-0xe08fffff] |
| [ 0.548270] pci_bus 0000:04: resource 2 [mem 0xe1c00000-0xe23fffff 64bit pref] |
| [ 0.548272] pci_bus 0000:07: resource 1 [mem 0xe2800000-0xe28fffff] |
| [ 0.548458] NET: Registered protocol family 2 |
| [ 0.548724] tcp_listen_portaddr_hash hash table entries: 8192 (order: 5, 131072 bytes) |
| [ 0.548824] TCP established hash table entries: 131072 (order: 8, 1048576 bytes) |
| [ 0.549225] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes) |
| [ 0.549419] TCP: Hash tables configured (established 131072 bind 65536) |
| [ 0.549488] UDP hash table entries: 8192 (order: 6, 262144 bytes) |
| [ 0.549568] UDP-Lite hash table entries: 8192 (order: 6, 262144 bytes) |
| [ 0.549742] NET: Registered protocol family 1 |
| [ 0.549755] NET: Registered protocol family 44 |
| [ 0.549773] pci 0000:00:02.0: Video device with shadowed ROM at [mem 0x000c0000-0x000dffff] |
| [ 0.552272] PCI: CLS 64 bytes, default 64 |
| [ 0.552344] Unpacking initramfs... |
| [ 2.422993] Freeing initrd memory: 65080K |
| [ 2.452493] PCI-DMA: Using software bounce buffering for IO (SWIOTLB) |
| [ 2.452496] software IO TLB: mapped [mem 0x77f30000-0x7bf30000] (64MB) |
| [ 2.452797] check: Scanning for low memory corruption every 60 seconds |
| [ 2.454473] Initialise system trusted keyrings |
| [ 2.454480] Key type blacklist registered |
| [ 2.454505] workingset: timestamp_bits=36 max_order=22 bucket_order=0 |
| [ 2.455665] zbud: loaded |
| [ 2.456037] squashfs: version 4.0 (2009/01/31) Phillip Lougher |
| [ 2.456198] fuse init (API version 7.28) |
| [ 2.493357] Key type asymmetric registered |
| [ 2.493358] Asymmetric key parser 'x509' registered |
| [ 2.493367] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 243) |
| [ 2.493401] io scheduler mq-deadline registered |
| [ 2.494383] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4 |
| [ 2.494434] efifb: probing for efifb |
| [ 2.494446] efifb: framebuffer at 0xd0000000, using 5632k, total 5632k |
| [ 2.494446] efifb: mode is 1600x900x32, linelength=6400, pages=1 |
| [ 2.494447] efifb: scrolling: redraw |
| [ 2.494448] efifb: Truecolor: size=8:8:8:8, shift=24:16:8:0 |
| [ 2.494532] Console: switching to colour frame buffer device 200x56 |
| [ 2.494553] fb0: EFI VGA frame buffer device |
| [ 2.494560] intel_idle: MWAIT substates: 0x21120 |
| [ 2.494561] intel_idle: v0.4.1 model 0x3A |
| [ 2.494873] intel_idle: lapic_timer_reliable_states 0xffffffff |
| [ 2.498434] ACPI: AC Adapter [AC] (on-line) |
| [ 2.498490] input: Lid Switch as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/device:2a/PNP0C09:00/PNP0C0D:00/input/input0 |
| [ 2.498496] ACPI: Lid Switch [LID] |
| [ 2.498525] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input1 |
| [ 2.498539] ACPI: Power Button [PWRF] |
| [ 2.500064] Serial: 8250/16550 driver, 32 ports, IRQ sharing enabled |
| [ 2.500089] battery: ACPI: Battery Slot [BAT0] (battery absent) |
| [ 2.500168] battery: ACPI: Battery Slot [BAT1] (battery absent) |
| [ 2.520888] serial8250: ttyS0 at I/O 0x3f8 (irq = 4, base_baud = 115200) is a 16550A |
| [ 2.522429] Linux agpgart interface v0.103 |
| [ 2.527617] tpm_tis 00:06: 1.2 TPM (device-id 0xB, rev-id 16) |
| [ 2.587436] loop: module loaded |
| [ 2.587606] libphy: Fixed MDIO Bus: probed |
| [ 2.587607] tun: Universal TUN/TAP device driver, 1.6 |
| [ 2.587629] PPP generic driver version 2.4.2 |
| [ 2.587659] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver |
| [ 2.587662] ehci-pci: EHCI PCI platform driver |
| [ 2.587801] ehci-pci 0000:00:1a.0: EHCI Host Controller |
| [ 2.587807] ehci-pci 0000:00:1a.0: new USB bus registered, assigned bus number 1 |
| [ 2.587819] ehci-pci 0000:00:1a.0: debug port 2 |
| [ 2.591717] ehci-pci 0000:00:1a.0: cache line size of 64 is not supported |
| [ 2.591732] ehci-pci 0000:00:1a.0: irq 19, io mem 0xe292f000 |
| [ 2.604504] ehci-pci 0000:00:1a.0: USB 2.0 started, EHCI 1.00 |
| [ 2.604573] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 5.00 |
| [ 2.604575] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 |
| [ 2.604576] usb usb1: Product: EHCI Host Controller |
| [ 2.604577] usb usb1: Manufacturer: Linux 5.0.0-21-generic ehci_hcd |
| [ 2.604578] usb usb1: SerialNumber: 0000:00:1a.0 |
| [ 2.604772] hub 1-0:1.0: USB hub found |
| [ 2.604780] hub 1-0:1.0: 3 ports detected |
| [ 2.605001] ehci-pci 0000:00:1d.0: EHCI Host Controller |
| [ 2.605005] ehci-pci 0000:00:1d.0: new USB bus registered, assigned bus number 2 |
| [ 2.605015] ehci-pci 0000:00:1d.0: debug port 2 |
| [ 2.608928] ehci-pci 0000:00:1d.0: cache line size of 64 is not supported |
| [ 2.608939] ehci-pci 0000:00:1d.0: irq 18, io mem 0xe2930000 |
| [ 2.624505] ehci-pci 0000:00:1d.0: USB 2.0 started, EHCI 1.00 |
| [ 2.624563] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 5.00 |
| [ 2.624564] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1 |
| [ 2.624565] usb usb2: Product: EHCI Host Controller |
| [ 2.624566] usb usb2: Manufacturer: Linux 5.0.0-21-generic ehci_hcd |
| [ 2.624567] usb usb2: SerialNumber: 0000:00:1d.0 |
| [ 2.624744] hub 2-0:1.0: USB hub found |
| [ 2.624752] hub 2-0:1.0: 3 ports detected |
| [ 2.624854] ehci-platform: EHCI generic platform driver |
| [ 2.624863] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver |
| [ 2.624866] ohci-pci: OHCI PCI platform driver |
| [ 2.624873] ohci-platform: OHCI generic platform driver |
| [ 2.624878] uhci_hcd: USB Universal Host Controller Interface driver |
| [ 2.625231] xhci_hcd 0000:07:00.0: xHCI Host Controller |
| [ 2.625235] xhci_hcd 0000:07:00.0: new USB bus registered, assigned bus number 3 |
| [ 2.625392] xhci_hcd 0000:07:00.0: hcc params 0x014042c3 hci version 0x96 quirks 0x0000000000000004 |
| [ 2.625743] usb usb3: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 5.00 |
| [ 2.625744] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1 |
| [ 2.625745] usb usb3: Product: xHCI Host Controller |
| [ 2.625746] usb usb3: Manufacturer: Linux 5.0.0-21-generic xhci-hcd |
| [ 2.625747] usb usb3: SerialNumber: 0000:07:00.0 |
| [ 2.625920] hub 3-0:1.0: USB hub found |
| [ 2.625933] hub 3-0:1.0: 2 ports detected |
| [ 2.626049] xhci_hcd 0000:07:00.0: xHCI Host Controller |
| [ 2.626051] xhci_hcd 0000:07:00.0: new USB bus registered, assigned bus number 4 |
| [ 2.626053] xhci_hcd 0000:07:00.0: Host supports USB 3.0 SuperSpeed |
| [ 2.628827] usb usb4: We don't know the algorithms for LPM for this host, disabling LPM. |
| [ 2.628845] usb usb4: New USB device found, idVendor=1d6b, idProduct=0003, bcdDevice= 5.00 |
| [ 2.628846] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1 |
| [ 2.628847] usb usb4: Product: xHCI Host Controller |
| [ 2.628848] usb usb4: Manufacturer: Linux 5.0.0-21-generic xhci-hcd |
| [ 2.628849] usb usb4: SerialNumber: 0000:07:00.0 |
| [ 2.629020] hub 4-0:1.0: USB hub found |
| [ 2.629031] hub 4-0:1.0: 2 ports detected |
| [ 2.629152] i8042: PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at 0x60,0x64 irq 1,12 |
| [ 2.630976] i8042: Detected active multiplexing controller, rev 1.1 |
| [ 2.631787] serio: i8042 KBD port at 0x60,0x64 irq 1 |
| [ 2.631791] serio: i8042 AUX0 port at 0x60,0x64 irq 12 |
| [ 2.631812] serio: i8042 AUX1 port at 0x60,0x64 irq 12 |
| [ 2.631828] serio: i8042 AUX2 port at 0x60,0x64 irq 12 |
| [ 2.631844] serio: i8042 AUX3 port at 0x60,0x64 irq 12 |
| [ 2.631986] mousedev: PS/2 mouse device common for all mice |
| [ 2.632135] rtc_cmos 00:03: RTC can wake from S4 |
| [ 2.632263] rtc_cmos 00:03: registered as rtc0 |
| [ 2.632276] rtc_cmos 00:03: alarms up to one month, 242 bytes nvram, hpet irqs |
| [ 2.632281] i2c /dev entries driver |
| [ 2.632352] device-mapper: uevent: version 1.0.3 |
| [ 2.632397] device-mapper: ioctl: 4.39.0-ioctl (2018-04-03) initialised: dm-devel@redhat.com |
| [ 2.632413] platform eisa.0: Probing EISA bus 0 |
| [ 2.632414] platform eisa.0: EISA: Cannot allocate resource for mainboard |
| [ 2.632415] platform eisa.0: Cannot allocate resource for EISA slot 1 |
| [ 2.632416] platform eisa.0: Cannot allocate resource for EISA slot 2 |
| [ 2.632417] platform eisa.0: Cannot allocate resource for EISA slot 3 |
| [ 2.632418] platform eisa.0: Cannot allocate resource for EISA slot 4 |
| [ 2.632419] platform eisa.0: Cannot allocate resource for EISA slot 5 |
| [ 2.632420] platform eisa.0: Cannot allocate resource for EISA slot 6 |
| [ 2.632421] platform eisa.0: Cannot allocate resource for EISA slot 7 |
| [ 2.632422] platform eisa.0: Cannot allocate resource for EISA slot 8 |
| [ 2.632422] platform eisa.0: EISA: Detected 0 cards |
| [ 2.632427] intel_pstate: Intel P-state driver initializing |
| [ 2.632966] ledtrig-cpu: registered to indicate activity on CPUs |
| [ 2.632968] EFI Variables Facility v0.08 2004-May-17 |
| [ 2.633417] NET: Registered protocol family 10 |
| [ 2.638447] Segment Routing with IPv6 |
| [ 2.638462] NET: Registered protocol family 17 |
| [ 2.638535] Key type dns_resolver registered |
| [ 2.638861] RAS: Correctable Errors collector initialized. |
| [ 2.638900] microcode: sig=0x306a9, pf=0x10, revision=0x21 |
| [ 2.639008] microcode: Microcode Update Driver: v2.2. |
| [ 2.639018] sched_clock: Marking stable (2642663187, -3657592)->(2653778038, -14772443) |
| [ 2.639337] registered taskstats version 1 |
| [ 2.639344] Loading compiled-in X.509 certificates |
| [ 2.640735] Loaded X.509 cert 'Build time autogenerated kernel key: a28c2e8765789350bee5e6cdac3f10cbd60f946e' |
| [ 2.640769] Couldn't get size: 0x800000000000000e |
| [ 2.640770] MODSIGN: Couldn't get UEFI db list |
| [ 2.640795] Couldn't get size: 0x800000000000000e |
| [ 2.640796] MODSIGN: Couldn't get UEFI MokListRT |
| [ 2.640803] Couldn't get size: 0x800000000000000e |
| [ 2.640804] MODSIGN: Couldn't get UEFI dbx list |
| [ 2.640819] zswap: loaded using pool lzo/zbud |
| [ 2.645408] Key type big_key registered |
| [ 2.645411] Key type trusted registered |
| [ 2.647666] Key type encrypted registered |
| [ 2.647669] AppArmor: AppArmor sha1 policy hashing enabled |
| [ 2.647847] ima: Allocated hash algorithm: sha1 |
| [ 2.656447] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input2 |
| [ 2.749597] No architecture policies found |
| [ 2.749628] evm: Initialising EVM extended attributes: |
| [ 2.749629] evm: security.selinux |
| [ 2.749629] evm: security.SMACK64 |
| [ 2.749629] evm: security.SMACK64EXEC |
| [ 2.749630] evm: security.SMACK64TRANSMUTE |
| [ 2.749630] evm: security.SMACK64MMAP |
| [ 2.749630] evm: security.apparmor |
| [ 2.749631] evm: security.ima |
| [ 2.749631] evm: security.capability |
| [ 2.749631] evm: HMAC attrs: 0x1 |
| [ 2.749872] Magic number: 11:598:745 |
| [ 2.749997] rtc_cmos 00:03: setting system clock to 2019-07-28T17:43:49 UTC (1564335829) |
| [ 2.751197] Freeing unused decrypted memory: 2040K |
| [ 2.751553] Freeing unused kernel image memory: 2576K |
| [ 2.764516] Write protecting the kernel read-only data: 22528k |
| [ 2.765129] Freeing unused kernel image memory: 2016K |
| [ 2.765466] Freeing unused kernel image memory: 1848K |
| [ 2.773721] x86/mm: Checked W+X mappings: passed, no W+X pages found. |
| [ 2.773722] x86/mm: Checking user space page tables |
| [ 2.781177] x86/mm: Checked W+X mappings: passed, no W+X pages found. |
| [ 2.781179] Run /init as init process |
| [ 2.846401] sdhci: Secure Digital Host Controller Interface driver |
| [ 2.846402] sdhci: Copyright(c) Pierre Ossman |
| [ 2.848328] ACPI Warning: SystemIO range 0x0000000000000528-0x000000000000052F conflicts with OpRegion 0x0000000000000500-0x000000000000057F (\PMIO) (20181213/utaddress-213) |
| [ 2.848334] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver |
| [ 2.848337] ACPI Warning: SystemIO range 0x00000000000004C0-0x00000000000004CF conflicts with OpRegion 0x0000000000000480-0x00000000000004EB (\GPIO) (20181213/utaddress-213) |
| [ 2.848341] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver |
| [ 2.848342] ACPI Warning: SystemIO range 0x00000000000004B0-0x00000000000004BF conflicts with OpRegion 0x0000000000000480-0x00000000000004EB (\GPIO) (20181213/utaddress-213) |
| [ 2.848345] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver |
| [ 2.848346] ACPI Warning: SystemIO range 0x0000000000000480-0x00000000000004AF conflicts with OpRegion 0x0000000000000480-0x00000000000004EB (\GPIO) (20181213/utaddress-213) |
| [ 2.848349] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver |
| [ 2.848349] lpc_ich: Resource conflict(s) found affecting gpio_ich |
| [ 2.849105] e1000e: Intel(R) PRO/1000 Network Driver - 3.2.6-k |
| [ 2.849105] e1000e: Copyright(c) 1999 - 2015 Intel Corporation. |
| [ 2.849313] e1000e 0000:00:19.0: Interrupt Throttling Rate (ints/sec) set to dynamic conservative mode |
| [ 2.849374] sdhci-pci 0000:04:00.1: SDHCI controller found [197b:2392] (rev 30) |
| [ 2.849848] mmc0 bounce up to 128 segments into one, max segment size 65536 bytes |
| [ 2.850900] ahci 0000:00:1f.2: version 3.0 |
| [ 2.851122] ahci 0000:00:1f.2: SSS flag set, parallel bus scan disabled |
| [ 2.851162] ahci 0000:00:1f.2: AHCI 0001.0300 32 slots 6 ports 6 Gbps 0x3b impl SATA mode |
| [ 2.851165] ahci 0000:00:1f.2: flags: 64bit ncq sntf ilck stag pm led clo pio slum part apst |
| [ 2.853067] mmc0: SDHCI controller on PCI [0000:04:00.1] using DMA |
| [ 2.853095] sdhci-pci 0000:04:00.2: SDHCI controller found [197b:2391] (rev 30) |
| [ 2.853537] sdhci-pci 0000:04:00.2: Refusing to bind to secondary interface. |
| [ 2.862445] scsi host0: ahci |
| [ 2.864789] scsi host1: ahci |
| [ 2.864948] cryptd: max_cpu_qlen set to 1000 |
| [ 2.867870] scsi host2: ahci |
| [ 2.870225] AVX version of gcm_enc/dec engaged. |
| [ 2.870226] AES CTR mode by8 optimization enabled |
| [ 2.875734] scsi host3: ahci |
| [ 2.876768] scsi host4: ahci |
| [ 2.877585] scsi host5: ahci |
| [ 2.877642] ata1: SATA max UDMA/133 abar m2048@0xe292e000 port 0xe292e100 irq 35 |
| [ 2.877645] ata2: SATA max UDMA/133 abar m2048@0xe292e000 port 0xe292e180 irq 35 |
| [ 2.877645] ata3: DUMMY |
| [ 2.877647] ata4: SATA max UDMA/133 abar m2048@0xe292e000 port 0xe292e280 irq 35 |
| [ 2.877649] ata5: SATA max UDMA/133 abar m2048@0xe292e000 port 0xe292e300 irq 35 |
| [ 2.877651] ata6: SATA max UDMA/133 abar m2048@0xe292e000 port 0xe292e380 irq 35 |
| [ 2.905064] VFIO - User Level meta-driver version: 0.3 |
| [ 2.927774] checking generic (d0000000 580000) vs hw (d0000000 10000000) |
| [ 2.927775] fb0: switching to inteldrmfb from EFI VGA |
| [ 2.927792] Console: switching to colour dummy device 80x25 |
| [ 2.927858] [drm] Replacing VGA console driver |
| [ 2.936550] firewire_ohci 0000:04:00.0: added OHCI v1.10 device as card 0, 4 IR + 4 IT contexts, quirks 0x10 |
| [ 2.944487] usb 1-1: new high-speed USB device number 2 using ehci-pci |
| [ 2.958456] e1000e 0000:00:19.0 0000:00:19.0 (uninitialized): registered PHC clock |
| [ 2.964562] usb 3-1: new low-speed USB device number 2 using xhci_hcd |
| [ 2.964565] usb 2-1: new high-speed USB device number 2 using ehci-pci |
| [ 2.979175] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013). |
| [ 2.979178] [drm] Driver supports precise vblank timestamp query. |
| [ 2.979951] i915 0000:00:02.0: vgaarb: changed VGA decodes: olddecodes=io+mem,decodes=io+mem:owns=io+mem |
| [ 3.007245] [drm] Initialized i915 1.6.0 20181204 for 0000:00:02.0 on minor 0 |
| [ 3.007380] ACPI: Video Device [GFX0] (multi-head: yes rom: no post: no) |
| [ 3.029774] acpi device:0d: registered as cooling_device8 |
| [ 3.029828] input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:00/input/input8 |
| [ 3.057547] fbcon: inteldrmfb (fb0) is primary device |
| [ 3.057597] Console: switching to colour frame buffer device 200x56 |
| [ 3.057614] i915 0000:00:02.0: fb0: inteldrmfb frame buffer device |
| [ 3.060419] e1000e 0000:00:19.0 eth0: (PCI Express:2.5GT/s:Width x1) 10:1f:74:fe:c4:de |
| [ 3.060421] e1000e 0000:00:19.0 eth0: Intel(R) PRO/1000 Network Connection |
| [ 3.060457] e1000e 0000:00:19.0 eth0: MAC: 10, PHY: 11, PBA No: FFFFFF-0FF |
| [ 3.061206] e1000e 0000:00:19.0 eno0: renamed from eth0 |
| [ 3.101270] usb 1-1: New USB device found, idVendor=8087, idProduct=0024, bcdDevice= 0.00 |
| [ 3.101271] usb 1-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0 |
| [ 3.101552] hub 1-1:1.0: USB hub found |
| [ 3.101651] hub 1-1:1.0: 6 ports detected |
| [ 3.121278] usb 2-1: New USB device found, idVendor=8087, idProduct=0024, bcdDevice= 0.00 |
| [ 3.121280] usb 2-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0 |
| [ 3.121574] hub 2-1:1.0: USB hub found |
| [ 3.121665] hub 2-1:1.0: 8 ports detected |
| [ 3.152002] usb 3-1: New USB device found, idVendor=03f0, idProduct=0024, bcdDevice= 3.00 |
| [ 3.152003] usb 3-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0 |
| [ 3.152004] usb 3-1: Product: HP Basic USB Keyboard |
| [ 3.152005] usb 3-1: Manufacturer: CHICONY |
| [ 3.190907] ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300) |
| [ 3.192576] ata1.00: supports DRM functions and may not be fully accessible |
| [ 3.193383] ata1.00: disabling queued TRIM support |
| [ 3.193387] ata1.00: ATA-9: Samsung SSD 850 PRO 256GB, EXM04B6Q, max UDMA/133 |
| [ 3.193389] ata1.00: 500118192 sectors, multi 1: LBA48 NCQ (depth 32), AA |
| [ 3.195408] ata1.00: supports DRM functions and may not be fully accessible |
| [ 3.196089] ata1.00: disabling queued TRIM support |
| [ 3.197643] ata1.00: configured for UDMA/133 |
| [ 3.208046] scsi 0:0:0:0: Direct-Access ATA Samsung SSD 850 4B6Q PQ: 0 ANSI: 5 |
| [ 3.208245] sd 0:0:0:0: [sda] 500118192 512-byte logical blocks: (256 GB/238 GiB) |
| [ 3.208252] sd 0:0:0:0: [sda] Write Protect is off |
| [ 3.208253] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 |
| [ 3.208262] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA |
| [ 3.208285] sd 0:0:0:0: Attached scsi generic sg0 type 0 |
| [ 3.209607] sda: sda1 sda2 sda3 |
| [ 3.210692] sd 0:0:0:0: [sda] supports TCG Opal |
| [ 3.210693] sd 0:0:0:0: [sda] Attached SCSI disk |
| [ 3.284508] usb 3-2: new low-speed USB device number 3 using xhci_hcd |
| [ 3.388543] usb 1-1.1: new full-speed USB device number 3 using ehci-pci |
| [ 3.408548] usb 2-1.4: new high-speed USB device number 3 using ehci-pci |
| [ 3.456567] tsc: Refined TSC clocksource calibration: 2693.884 MHz |
| [ 3.456591] clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x26d4acba1c8, max_idle_ns: 440795203559 ns |
| [ 3.456653] clocksource: Switched to clocksource tsc |
| [ 3.456802] firewire_core 0000:04:00.0: created device fw0: GUID ffe473fffffffffe, S400 |
| [ 3.467086] usb 3-2: New USB device found, idVendor=046d, idProduct=c016, bcdDevice= 3.40 |
| [ 3.467087] usb 3-2: New USB device strings: Mfr=1, Product=2, SerialNumber=0 |
| [ 3.467088] usb 3-2: Product: Optical USB Mouse |
| [ 3.467089] usb 3-2: Manufacturer: Logitech |
| [ 3.468541] usb 1-1.1: device descriptor read/64, error -32 |
| [ 3.475946] hidraw: raw HID events driver (C) Jiri Kosina |
| [ 3.501123] usbcore: registered new interface driver usbhid |
| [ 3.501124] usbhid: USB HID core driver |
| [ 3.503155] input: CHICONY HP Basic USB Keyboard as /devices/pci0000:00/0000:00:1c.6/0000:07:00.0/usb3/3-1/3-1:1.0/0003:03F0:0024.0001/input/input9 |
| [ 3.523294] ata2: SATA link down (SStatus 0 SControl 300) |
| [ 3.560845] hid-generic 0003:03F0:0024.0001: input,hidraw0: USB HID v1.10 Keyboard [CHICONY HP Basic USB Keyboard] on usb-0000:07:00.0-1/input0 |
| [ 3.560964] input: Logitech Optical USB Mouse as /devices/pci0000:00/0000:00:1c.6/0000:07:00.0/usb3/3-2/3-2:1.0/0003:046D:C016.0002/input/input10 |
| [ 3.561251] hid-generic 0003:046D:C016.0002: input,hidraw1: USB HID v1.10 Mouse [Logitech Optical USB Mouse] on usb-0000:07:00.0-2/input0 |
| [ 3.651241] usb 2-1.4: New USB device found, idVendor=1bcf, idProduct=2805, bcdDevice=20.15 |
| [ 3.651246] usb 2-1.4: New USB device strings: Mfr=1, Product=2, SerialNumber=0 |
| [ 3.651248] usb 2-1.4: Product: HP HD Webcam [Fixed] |
| [ 3.651250] usb 2-1.4: Manufacturer: 6047B0021701A0117K1KB |
| [ 3.656568] usb 1-1.1: device descriptor read/64, error -32 |
| [ 3.827312] input: PS/2 Generic Mouse as /devices/platform/i8042/serio1/input/input7 |
| [ 3.839984] ata4: SATA link down (SStatus 0 SControl 300) |
| [ 3.844517] usb 1-1.1: new full-speed USB device number 4 using ehci-pci |
| [ 3.924548] usb 1-1.1: device descriptor read/64, error -32 |
| [ 4.112572] usb 1-1.1: device descriptor read/64, error -32 |
| [ 4.156221] ata5: SATA link down (SStatus 0 SControl 300) |
| [ 4.220871] usb 1-1-port1: attempt power cycle |
| [ 4.471851] ata6: SATA link down (SStatus 0 SControl 300) |
| [ 4.646875] psmouse serio4: synaptics: queried max coordinates: x [..5728], y [..4916] |
| [ 4.719134] psmouse serio4: synaptics: Touchpad model: 1, fw: 7.5, id: 0x1e0b1, caps: 0xd00073/0x640000/0xa0400/0x0, board id: 1623, fw id: 790122 |
| [ 4.765699] input: SynPS/2 Synaptics TouchPad as /devices/platform/i8042/serio4/input/input13 |
| [ 4.824557] usb 1-1.1: new full-speed USB device number 5 using ehci-pci |
| [ 5.240558] usb 1-1.1: device not accepting address 5, error -32 |
| [ 5.320573] usb 1-1.1: new full-speed USB device number 6 using ehci-pci |
| [ 5.736572] usb 1-1.1: device not accepting address 6, error -32 |
| [ 5.736873] usb 1-1-port1: unable to enumerate USB device |
| [ 14.161769] NET: Registered protocol family 38 |
| [ 14.234734] device-mapper: crypt: xts(aes) using implementation "xts-aes-aesni" |
| [ 14.344318] EXT4-fs (dm-1): mounted filesystem with ordered data mode. Opts: (null) |
| [ 14.494670] systemd[1]: Inserted module 'autofs4' |
| [ 14.508030] systemd[1]: systemd 240 running in system mode. (+PAM +AUDIT +SELINUX +IMA +APPARMOR +SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ +LZ4 +SECCOMP +BLKID +ELFUTILS +KMOD -IDN2 +IDN -PCRE2 default-hierarchy=hybrid) |
| [ 14.524691] systemd[1]: Detected architecture x86-64. |
| [ 14.526995] systemd[1]: Set hostname to <polygon>. |
| [ 14.638172] systemd[1]: /lib/systemd/system/spice-vdagentd.service:8: PIDFile= references path below legacy directory /var/run/, updating /var/run/spice-vdagentd/spice-vdagentd.pid → /run/spice-vdagentd/spice-vdagentd.pid; please update the unit file accordingly. |
| [ 14.642152] systemd[1]: Created slice system-systemd\x2dcryptsetup.slice. |
| [ 14.642184] systemd[1]: Reached target Remote File Systems. |
| [ 14.642321] systemd[1]: Created slice User and Session Slice. |
| [ 14.642370] systemd[1]: Listening on initctl Compatibility Named Pipe. |
| [ 14.642455] systemd[1]: Listening on Journal Socket (/dev/log). |
| [ 14.642495] systemd[1]: Started Forward Password Requests to Wall Directory Watch. |
| [ 14.652686] bpfilter: Loaded bpfilter_umh pid 703 |
| [ 14.662127] EXT4-fs (dm-1): re-mounted. Opts: errors=remount-ro |
| [ 14.663913] lp: driver loaded but no devices found |
| [ 14.671132] ppdev: user-space parallel port driver |
| [ 14.673540] parport0: PC-style at 0x378 [PCSPP,EPP] |
| [ 14.772780] lp0: using parport0 (polling). |
| [ 14.784273] bridge: filtering via arp/ip/ip6tables is no longer available by default. Update your scripts to load br_netfilter if you need this. |
| [ 14.786046] Bridge firewalling registered |
| [ 14.950959] media: Linux media interface: v0.10 |
| [ 14.951130] RAPL PMU: API unit is 2^-32 Joules, 3 fixed counters, 163840 ms ovfl timer |
| [ 14.951131] RAPL PMU: hw unit of domain pp0-core 2^-16 Joules |
| [ 14.951132] RAPL PMU: hw unit of domain package 2^-16 Joules |
| [ 14.951133] RAPL PMU: hw unit of domain pp1-gpu 2^-16 Joules |
| [ 14.958705] videodev: Linux video capture interface: v2.00 |
| [ 14.977818] uvcvideo: Found UVC 1.00 device HP HD Webcam [Fixed] (1bcf:2805) |
| [ 14.981000] intel_rapl: Found RAPL domain package |
| [ 14.981001] intel_rapl: Found RAPL domain core |
| [ 14.981002] intel_rapl: Found RAPL domain uncore |
| [ 15.014893] uvcvideo 2-1.4:1.0: Entity type for entity Extension 4 was not initialized! |
| [ 15.014896] uvcvideo 2-1.4:1.0: Entity type for entity Extension 3 was not initialized! |
| [ 15.014898] uvcvideo 2-1.4:1.0: Entity type for entity Processing 2 was not initialized! |
| [ 15.014899] uvcvideo 2-1.4:1.0: Entity type for entity Camera 1 was not initialized! |
| [ 15.014986] input: HP HD Webcam [Fixed]: HP HD Web as /devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.4/2-1.4:1.0/input/input14 |
| [ 15.015074] usbcore: registered new interface driver uvcvideo |
| [ 15.015075] USB Video Class driver (1.1.1) |
| [ 15.066992] snd_hda_intel 0000:00:1b.0: Linked as a consumer to 0000:00:02.0 |
| [ 15.067038] snd_hda_intel 0000:00:1b.0: bound 0000:00:02.0 (ops i915_audio_component_bind_ops [i915]) |
| [ 15.089781] snd_hda_codec_idt hdaudioC0D0: autoconfig for 92HD81B1X5: line_outs=1 (0xa/0x0/0x0/0x0/0x0) type:line |
| [ 15.089784] snd_hda_codec_idt hdaudioC0D0: speaker_outs=1 (0xd/0x0/0x0/0x0/0x0) |
| [ 15.089785] snd_hda_codec_idt hdaudioC0D0: hp_outs=1 (0xb/0x0/0x0/0x0/0x0) |
| [ 15.089787] snd_hda_codec_idt hdaudioC0D0: mono: mono_out=0x0 |
| [ 15.089788] snd_hda_codec_idt hdaudioC0D0: inputs: |
| [ 15.089790] snd_hda_codec_idt hdaudioC0D0: Mic=0xc |
| [ 15.089791] snd_hda_codec_idt hdaudioC0D0: Internal Mic=0x11 |
| [ 15.089792] snd_hda_codec_idt hdaudioC0D0: Line=0xf |
| [ 15.135451] input: HDA Intel PCH Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input15 |
| [ 15.135543] input: HDA Intel PCH Line as /devices/pci0000:00/0000:00:1b.0/sound/card0/input16 |
| [ 15.135630] input: HDA Intel PCH Dock Line Out as /devices/pci0000:00/0000:00:1b.0/sound/card0/input17 |
| [ 15.135689] input: HDA Intel PCH Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card0/input18 |
| [ 15.135775] input: HDA Intel PCH HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:1b.0/sound/card0/input19 |
| [ 15.135834] input: HDA Intel PCH HDMI/DP,pcm=7 as /devices/pci0000:00/0000:00:1b.0/sound/card0/input20 |
| [ 15.135898] input: HDA Intel PCH HDMI/DP,pcm=8 as /devices/pci0000:00/0000:00:1b.0/sound/card0/input21 |
| [ 15.274859] systemd-journald[706]: Received request to flush runtime journal from PID 1 |
| [ 15.554925] Adding 999420k swap on /dev/mapper/ubuntu--vg-swap_1. Priority:-2 extents:1 across:999420k SSFS |
| [ 15.580687] EXT4-fs (sda2): mounted filesystem with ordered data mode. Opts: (null) |
| [ 16.896573] mei_me 0000:00:16.0: wait hw ready failed |
| [ 16.896583] mei_me 0000:00:16.0: hw_start failed ret = -62 |
| [ 16.896628] mei_me 0000:00:16.0: H_RST is set = 0x80000015 |
| [ 18.912569] mei_me 0000:00:16.0: wait hw ready failed |
| [ 18.912579] mei_me 0000:00:16.0: hw_start failed ret = -62 |
| [ 18.912623] mei_me 0000:00:16.0: H_RST is set = 0x80000015 |
| [ 20.928568] mei_me 0000:00:16.0: wait hw ready failed |
| [ 20.928578] mei_me 0000:00:16.0: hw_start failed ret = -62 |
| [ 20.928590] mei_me 0000:00:16.0: reset: reached maximal consecutive resets: disabling the device |
| [ 20.928592] mei_me 0000:00:16.0: reset failed ret = -19 |
| [ 20.928595] mei_me 0000:00:16.0: link layer initialization failed. |
| [ 20.928598] mei_me 0000:00:16.0: init hw failure. |
| [ 20.928758] mei_me 0000:00:16.0: initialization failed. |
| [ 20.942410] spl: loading out-of-tree module taints kernel. |
| [ 20.945006] SPL: Loaded module v0.7.12-1ubuntu3 |
| [ 20.946542] znvpair: module license 'CDDL' taints kernel. |
| [ 20.946542] Disabling lock debugging due to kernel taint |
| [ 21.846838] ZFS: Loaded module v0.7.12-1ubuntu5, ZFS pool version 5000, ZFS filesystem version 5 |
| [ 23.891494] audit: type=1400 audit(1564335850.634:2): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/bin/man" pid=1333 comm="apparmor_parser" |
| [ 23.891497] audit: type=1400 audit(1564335850.634:3): apparmor="STATUS" operation="profile_load" profile="unconfined" name="man_filter" pid=1333 comm="apparmor_parser" |
| [ 23.891500] audit: type=1400 audit(1564335850.634:4): apparmor="STATUS" operation="profile_load" profile="unconfined" name="man_groff" pid=1333 comm="apparmor_parser" |
| [ 23.891777] audit: type=1400 audit(1564335850.634:5): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/sbin/ippusbxd" pid=1331 comm="apparmor_parser" |
| [ 23.892538] audit: type=1400 audit(1564335850.638:6): apparmor="STATUS" operation="profile_load" profile="unconfined" name="nvidia_modprobe" pid=1330 comm="apparmor_parser" |
| [ 23.892542] audit: type=1400 audit(1564335850.638:7): apparmor="STATUS" operation="profile_load" profile="unconfined" name="nvidia_modprobe//kmod" pid=1330 comm="apparmor_parser" |
| [ 23.893232] audit: type=1400 audit(1564335850.638:8): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/sbin/tcpdump" pid=1336 comm="apparmor_parser" |
| [ 23.893742] audit: type=1400 audit(1564335850.638:9): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/sbin/cups-browsed" pid=1335 comm="apparmor_parser" |
| [ 23.894896] audit: type=1400 audit(1564335850.638:10): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/snapd/snap-confine" pid=1340 comm="apparmor_parser" |
| [ 23.894900] audit: type=1400 audit(1564335850.638:11): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/snapd/snap-confine//mount-namespace-capture-helper" pid=1340 comm="apparmor_parser" |
| [ 27.890463] e1000e: eno0 NIC Link is Up 1000 Mbps Full Duplex, Flow Control: Rx/Tx |
| [ 27.890504] IPv6: ADDRCONF(NETDEV_CHANGE): eno0: link becomes ready |
| [ 28.231856] rfkill: input handler disabled |