blob: ea6a05578a155a6210df671713bb212158640812 [file] [log] [blame]
[ 0.000000] Linux version 4.19.0-1-amd64 (debian-kernel@lists.debian.org) (gcc version 8.2.0 (Debian 8.2.0-12)) #1 SMP Debian 4.19.9-1 (2018-12-16)
[ 0.000000] Command line: BOOT_IMAGE=/boot/vmlinuz-4.19.0-1-amd64 root=UUID=749a2872-dfdf-4601-a982-fedcd6f615c4 ro quiet
[ 0.000000] x86/fpu: x87 FPU will use FXSAVE
[ 0.000000] BIOS-provided physical RAM map:
[ 0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009fbff] usable
[ 0.000000] BIOS-e820: [mem 0x000000000009fc00-0x000000000009ffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000000f0000-0x00000000000fffff] reserved
[ 0.000000] BIOS-e820: [mem 0x0000000000100000-0x00000000bf312fff] usable
[ 0.000000] BIOS-e820: [mem 0x00000000bf313000-0x00000000bfffffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000f0000000-0x00000000f3ffffff] reserved
[ 0.000000] NX (Execute Disable) protection: active
[ 0.000000] SMBIOS 2.7 present.
[ 0.000000] DMI: Getac P470/P470, BIOS 4.8-2610-g7f520c8fe6 12/19/2018
[ 0.000000] tsc: Fast TSC calibration using PIT
[ 0.000000] tsc: Detected 1995.082 MHz processor
[ 0.002867] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
[ 0.002871] e820: remove [mem 0x000a0000-0x000fffff] usable
[ 0.002876] last_pfn = 0xbf313 max_arch_pfn = 0x400000000
[ 0.002885] MTRR default type: uncachable
[ 0.002886] MTRR fixed ranges enabled:
[ 0.002889] 00000-9FFFF write-back
[ 0.002890] A0000-BFFFF uncachable
[ 0.002892] C0000-FFFFF write-back
[ 0.002893] MTRR variable ranges enabled:
[ 0.002895] 0 base 000000000 mask F80000000 write-back
[ 0.002896] 1 base 080000000 mask FC0000000 write-back
[ 0.002898] 2 base 0BF400000 mask FFFC00000 uncachable
[ 0.002899] 3 base 0BF800000 mask FFF800000 uncachable
[ 0.002901] 4 base 0D0000000 mask FF0000000 write-combining
[ 0.002901] 5 disabled
[ 0.002902] 6 disabled
[ 0.002903] 7 disabled
[ 0.004585] x86/PAT: Configuration [0-7]: WB WC UC- UC WB WP UC- WT
[ 0.013110] found SMP MP-table at [mem 0x000f60a0-0x000f60af] mapped at [(____ptrval____)]
[ 0.013264] Base memory trampoline at [(____ptrval____)] 99000 size 24576
[ 0.013271] BRK [0x06e01000, 0x06e01fff] PGTABLE
[ 0.013274] BRK [0x06e02000, 0x06e02fff] PGTABLE
[ 0.013276] BRK [0x06e03000, 0x06e03fff] PGTABLE
[ 0.013304] BRK [0x06e04000, 0x06e04fff] PGTABLE
[ 0.013307] BRK [0x06e05000, 0x06e05fff] PGTABLE
[ 0.013433] BRK [0x06e06000, 0x06e06fff] PGTABLE
[ 0.013456] RAMDISK: [mem 0x32b1b000-0x35584fff]
[ 0.013468] ACPI: Early table checksum verification disabled
[ 0.013546] ACPI: RSDP 0x00000000000F6250 000024 (v02 COREv4)
[ 0.013553] ACPI: XSDT 0x00000000BF3140E0 000054 (v01 COREv4 COREBOOT 00000000 CORE 00000000)
[ 0.013561] ACPI: FACP 0x00000000BF318010 0000F4 (v04 COREv4 COREBOOT 00000000 CORE 00000000)
[ 0.013569] ACPI: DSDT 0x00000000BF314280 003D81 (v02 COREv4 COREBOOT 20090419 INTL 20180810)
[ 0.013574] ACPI: FACS 0x00000000BF314240 000040
[ 0.013578] ACPI: FACS 0x00000000BF314240 000040
[ 0.013582] ACPI: SSDT 0x00000000BF318110 000758 (v02 COREv4 COREBOOT 0000002A CORE 0000002A)
[ 0.013588] ACPI: MCFG 0x00000000BF318870 00003C (v01 COREv4 COREBOOT 00000000 CORE 00000000)
[ 0.013593] ACPI: APIC 0x00000000BF3188B0 000068 (v02 COREv4 COREBOOT 00000000 CORE 00000000)
[ 0.013598] ACPI: ECDT 0x00000000BF318920 000054 (v01 COREv4 COREBOOT 00000000 CORE 00000000)
[ 0.013603] ACPI: HPET 0x00000000BF31A980 000038 (v01 COREv4 COREBOOT 00000000 CORE 00000000)
[ 0.013615] ACPI: Local APIC address 0xfee00000
[ 0.013726] No NUMA configuration found
[ 0.013728] Faking a node at [mem 0x0000000000000000-0x00000000bf312fff]
[ 0.013733] NODE_DATA(0) allocated [mem 0xbf30e000-0xbf312fff]
[ 0.013774] Zone ranges:
[ 0.013775] DMA [mem 0x0000000000001000-0x0000000000ffffff]
[ 0.013777] DMA32 [mem 0x0000000001000000-0x00000000bf312fff]
[ 0.013779] Normal empty
[ 0.013781] Device empty
[ 0.013782] Movable zone start for each node
[ 0.013783] Early memory node ranges
[ 0.013785] node 0: [mem 0x0000000000001000-0x000000000009efff]
[ 0.013786] node 0: [mem 0x0000000000100000-0x00000000bf312fff]
[ 0.013790] Reserved but unavailable: 98 pages
[ 0.013792] Initmem setup node 0 [mem 0x0000000000001000-0x00000000bf312fff]
[ 0.013794] On node 0 totalpages: 783025
[ 0.013795] DMA zone: 64 pages used for memmap
[ 0.013796] DMA zone: 21 pages reserved
[ 0.013797] DMA zone: 3998 pages, LIFO batch:0
[ 0.013937] DMA32 zone: 12173 pages used for memmap
[ 0.013938] DMA32 zone: 779027 pages, LIFO batch:63
[ 0.062224] Reserving Intel graphics memory at [mem 0xbf800000-0xbfffffff]
[ 0.062610] ACPI: PM-Timer IO Port: 0x508
[ 0.062613] ACPI: Local APIC address 0xfee00000
[ 0.062625] ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
[ 0.062626] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
[ 0.062642] IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-23
[ 0.062646] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 high edge)
[ 0.062649] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[ 0.062651] ACPI: IRQ0 used by override.
[ 0.062653] ACPI: IRQ9 used by override.
[ 0.062655] Using ACPI (MADT) for SMP configuration information
[ 0.062657] ACPI: HPET id: 0x8086a201 base: 0xfed00000
[ 0.062667] smpboot: Allowing 2 CPUs, 0 hotplug CPUs
[ 0.062684] PM: Registered nosave memory: [mem 0x00000000-0x00000fff]
[ 0.062685] PM: Registered nosave memory: [mem 0x0009f000-0x0009ffff]
[ 0.062686] PM: Registered nosave memory: [mem 0x000a0000-0x000effff]
[ 0.062687] PM: Registered nosave memory: [mem 0x000f0000-0x000fffff]
[ 0.062690] [mem 0xc0000000-0xefffffff] available for PCI devices
[ 0.062692] Booting paravirtualized kernel on bare hardware
[ 0.062697] clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645519600211568 ns
[ 0.262224] random: get_random_bytes called from start_kernel+0x93/0x537 with crng_init=0
[ 0.262238] setup_percpu: NR_CPUS:512 nr_cpumask_bits:512 nr_cpu_ids:2 nr_node_ids:1
[ 0.263337] percpu: Embedded 44 pages/cpu @(____ptrval____) s143192 r8192 d28840 u1048576
[ 0.263346] pcpu-alloc: s143192 r8192 d28840 u1048576 alloc=1*2097152
[ 0.263348] pcpu-alloc: [0] 0 1
[ 0.263381] Built 1 zonelists, mobility grouping on. Total pages: 770767
[ 0.263383] Policy zone: DMA32
[ 0.263389] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-4.19.0-1-amd64 root=UUID=749a2872-dfdf-4601-a982-fedcd6f615c4 ro quiet
[ 0.263536] Calgary: detecting Calgary via BIOS EBDA area
[ 0.263546] Calgary: Unable to locate Rio Grande table in EBDA - bailing!
[ 0.315827] Memory: 3014360K/3132100K available (10252K kernel code, 1236K rwdata, 3192K rodata, 1572K init, 2332K bss, 117740K reserved, 0K cma-reserved)
[ 0.316042] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=2, Nodes=1
[ 0.316059] Kernel/User page tables isolation: enabled
[ 0.316140] ftrace: allocating 31613 entries in 124 pages
[ 0.338766] rcu: Hierarchical RCU implementation.
[ 0.338768] rcu: RCU restricting CPUs from NR_CPUS=512 to nr_cpu_ids=2.
[ 0.338770] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=2
[ 0.343237] NR_IRQS: 33024, nr_irqs: 440, preallocated irqs: 16
[ 0.345915] Console: colour VGA+ 80x25
[ 0.345921] console [tty0] enabled
[ 0.345950] ACPI: Core revision 20180810
[ 0.346152] clocksource: hpet: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 133484882848 ns
[ 0.346168] hpet clockevent registered
[ 0.346175] APIC: Switch to symmetric I/O mode setup
[ 0.346640] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[ 0.366172] clocksource: tsc-early: mask: 0xffffffffffffffff max_cycles: 0x39841154c16, max_idle_ns: 881590714121 ns
[ 0.366190] Calibrating delay loop (skipped), value calculated using timer frequency.. 3990.16 BogoMIPS (lpj=7980328)
[ 0.366195] pid_max: default: 32768 minimum: 301
[ 0.366245] Security Framework initialized
[ 0.366247] Yama: disabled by default; enable with sysctl kernel.yama.*
[ 0.366279] AppArmor: AppArmor initialized
[ 0.368872] Dentry cache hash table entries: 524288 (order: 10, 4194304 bytes)
[ 0.370888] Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes)
[ 0.370995] Mount-cache hash table entries: 8192 (order: 4, 65536 bytes)
[ 0.371064] Mountpoint-cache hash table entries: 8192 (order: 4, 65536 bytes)
[ 0.371491] mce: CPU supports 6 MCE banks
[ 0.371500] CPU0: Thermal monitoring enabled (TM2)
[ 0.371504] process: using mwait in idle threads
[ 0.371511] Last level iTLB entries: 4KB 128, 2MB 4, 4MB 4
[ 0.371512] Last level dTLB entries: 4KB 256, 2MB 0, 4MB 32, 1GB 0
[ 0.371515] Spectre V2 : Mitigation: Full generic retpoline
[ 0.371516] Spectre V2 : Spectre v2 / SpectreRSB mitigation: Filling RSB on context switch
[ 0.371518] Speculative Store Bypass: Vulnerable
[ 0.371742] Freeing SMP alternatives memory: 24K
[ 0.378174] smpboot: CPU0: Intel(R) Core(TM)2 CPU T7200 @ 2.00GHz (family: 0x6, model: 0xf, stepping: 0x6)
[ 0.378174] Performance Events: PEBS fmt0-, Core2 events, Intel PMU driver.
[ 0.378174] core: PEBS disabled due to CPU errata
[ 0.378174] ... version: 2
[ 0.378174] ... bit width: 40
[ 0.378174] ... generic registers: 2
[ 0.378174] ... value mask: 000000ffffffffff
[ 0.378174] ... max period: 000000007fffffff
[ 0.378174] ... fixed-purpose events: 3
[ 0.378174] ... event mask: 0000000700000003
[ 0.378174] rcu: Hierarchical SRCU implementation.
[ 0.378174] NMI watchdog: Enabled. Permanently consumes one hw-PMU counter.
[ 0.378174] smp: Bringing up secondary CPUs ...
[ 0.378174] x86: Booting SMP configuration:
[ 0.378174] .... node #0, CPUs: #1
[ 0.378276] smp: Brought up 1 node, 2 CPUs
[ 0.378276] smpboot: Max logical packages: 1
[ 0.378276] smpboot: Total of 2 processors activated (7980.32 BogoMIPS)
[ 0.380478] devtmpfs: initialized
[ 0.380478] x86/mm: Memory block size: 128MB
[ 0.382270] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns
[ 0.382278] futex hash table entries: 512 (order: 3, 32768 bytes)
[ 0.382356] pinctrl core: initialized pinctrl subsystem
[ 0.382621] NET: Registered protocol family 16
[ 0.382750] audit: initializing netlink subsys (disabled)
[ 0.382763] audit: type=2000 audit(1545320529.036:1): state=initialized audit_enabled=0 res=1
[ 0.382763] cpuidle: using governor ladder
[ 0.382763] cpuidle: using governor menu
[ 0.382763] ACPI: bus type PCI registered
[ 0.382763] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
[ 0.382763] PCI: MMCONFIG for domain 0000 [bus 00-3f] at [mem 0xf0000000-0xf3ffffff] (base 0xf0000000)
[ 0.382763] PCI: MMCONFIG at [mem 0xf0000000-0xf3ffffff] reserved in E820
[ 0.382763] PCI: Using configuration type 1 for base access
[ 0.383483] HugeTLB registered 2.00 MiB page size, pre-allocated 0 pages
[ 0.383483] ACPI: Added _OSI(Module Device)
[ 0.383483] ACPI: Added _OSI(Processor Device)
[ 0.383483] ACPI: Added _OSI(3.0 _SCP Extensions)
[ 0.383483] ACPI: Added _OSI(Processor Aggregator Device)
[ 0.383483] ACPI: Added _OSI(Linux-Dell-Video)
[ 0.383483] ACPI: Added _OSI(Linux-Lenovo-NV-HDMI-Audio)
[ 0.383483] ACPI: EC: EC started
[ 0.383483] ACPI: EC: interrupt blocked
[ 0.383483] ACPI: \: Used as first EC
[ 0.383483] ACPI: \: GPE=0x17, EC_CMD/EC_SC=0x66, EC_DATA=0x62
[ 0.383483] ACPI: \: Used as boot ECDT EC to handle transactions
[ 0.388351] ACPI: 2 ACPI AML tables successfully acquired and loaded
[ 0.389137] ACPI: [Firmware Bug]: BIOS _OSI(Linux) query ignored
[ 0.390443] ACPI: Interpreter enabled
[ 0.390468] ACPI: (supports S0 S3 S4 S5)
[ 0.390469] ACPI: Using IOAPIC for interrupt routing
[ 0.390501] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
[ 0.390735] ACPI: Enabled 12 GPEs in block 00 to 1F
[ 0.650441] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
[ 0.650450] acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI]
[ 0.650506] acpi PNP0A08:00: _OSC: OS now controls [PCIeHotplug SHPCHotplug PME AER PCIeCapability LTR]
[ 0.650518] acpi PNP0A08:00: [Firmware Info]: MMCONFIG for domain 0000 [bus 00-3f] only partially covers this bridge
[ 0.650581] acpi PNP0A08:00: ignoring host bridge window [mem 0x000c4000-0x000c7fff window] (conflicts with Video ROM [mem 0x000c0000-0x000c6dff])
[ 0.650831] PCI host bridge to bus 0000:00
[ 0.650834] pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7 window]
[ 0.650836] pci_bus 0000:00: root bus resource [io 0x0d00-0xffff window]
[ 0.650838] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff window]
[ 0.650840] pci_bus 0000:00: root bus resource [mem 0x000c0000-0x000c3fff window]
[ 0.650842] pci_bus 0000:00: root bus resource [mem 0x000c8000-0x000cbfff window]
[ 0.650844] pci_bus 0000:00: root bus resource [mem 0x000cc000-0x000cffff window]
[ 0.650846] pci_bus 0000:00: root bus resource [mem 0x000d0000-0x000d3fff window]
[ 0.650848] pci_bus 0000:00: root bus resource [mem 0x000d4000-0x000d7fff window]
[ 0.650850] pci_bus 0000:00: root bus resource [mem 0x000d8000-0x000dbfff window]
[ 0.650852] pci_bus 0000:00: root bus resource [mem 0x000dc000-0x000dffff window]
[ 0.650854] pci_bus 0000:00: root bus resource [mem 0x000e0000-0x000e3fff window]
[ 0.650856] pci_bus 0000:00: root bus resource [mem 0x000e4000-0x000e7fff window]
[ 0.650858] pci_bus 0000:00: root bus resource [mem 0x000e8000-0x000ebfff window]
[ 0.650860] pci_bus 0000:00: root bus resource [mem 0x000ec000-0x000effff window]
[ 0.650862] pci_bus 0000:00: root bus resource [mem 0x000f0000-0x000fffff window]
[ 0.650864] pci_bus 0000:00: root bus resource [mem 0xc0000000-0xfebfffff window]
[ 0.650866] pci_bus 0000:00: root bus resource [mem 0xfed40000-0xfed44fff window]
[ 0.650869] pci_bus 0000:00: root bus resource [bus 00-ff]
[ 0.650882] pci 0000:00:00.0: [8086:27a0] type 00 class 0x060000
[ 0.651033] pci 0000:00:02.0: [8086:27a2] type 00 class 0x030000
[ 0.651047] pci 0000:00:02.0: reg 0x10: [mem 0xe4300000-0xe437ffff]
[ 0.651053] pci 0000:00:02.0: reg 0x14: [io 0x4090-0x4097]
[ 0.651059] pci 0000:00:02.0: reg 0x18: [mem 0xd0000000-0xdfffffff pref]
[ 0.651066] pci 0000:00:02.0: reg 0x1c: [mem 0xe4400000-0xe443ffff]
[ 0.651197] pci 0000:00:02.1: [8086:27a6] type 00 class 0x038000
[ 0.651209] pci 0000:00:02.1: reg 0x10: [mem 0xe4380000-0xe43fffff]
[ 0.651399] pci 0000:00:1b.0: [8086:27d8] type 00 class 0x040300
[ 0.651431] pci 0000:00:1b.0: reg 0x10: [mem 0xe4440000-0xe4443fff 64bit]
[ 0.651542] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
[ 0.651685] pci 0000:00:1c.0: [8086:27d0] type 01 class 0x060400
[ 0.651801] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
[ 0.651941] pci 0000:00:1c.1: [8086:27d2] type 01 class 0x060400
[ 0.652060] pci 0000:00:1c.1: PME# supported from D0 D3hot D3cold
[ 0.652200] pci 0000:00:1c.2: [8086:27d4] type 01 class 0x060400
[ 0.652310] pci 0000:00:1c.2: PME# supported from D0 D3hot D3cold
[ 0.652448] pci 0000:00:1c.3: [8086:27d6] type 01 class 0x060400
[ 0.652567] pci 0000:00:1c.3: PME# supported from D0 D3hot D3cold
[ 0.652709] pci 0000:00:1d.0: [8086:27c8] type 00 class 0x0c0300
[ 0.652769] pci 0000:00:1d.0: reg 0x20: [io 0x4000-0x401f]
[ 0.652910] pci 0000:00:1d.1: [8086:27c9] type 00 class 0x0c0300
[ 0.652970] pci 0000:00:1d.1: reg 0x20: [io 0x4020-0x403f]
[ 0.653106] pci 0000:00:1d.2: [8086:27ca] type 00 class 0x0c0300
[ 0.653165] pci 0000:00:1d.2: reg 0x20: [io 0x4040-0x405f]
[ 0.653304] pci 0000:00:1d.3: [8086:27cb] type 00 class 0x0c0300
[ 0.653364] pci 0000:00:1d.3: reg 0x20: [io 0x4060-0x407f]
[ 0.653511] pci 0000:00:1d.7: [8086:27cc] type 00 class 0x0c0320
[ 0.653538] pci 0000:00:1d.7: reg 0x10: [mem 0xe4444000-0xe44443ff]
[ 0.653639] pci 0000:00:1d.7: PME# supported from D0 D3hot D3cold
[ 0.653761] pci 0000:00:1e.0: [8086:2448] type 01 class 0x060401
[ 0.653947] pci 0000:00:1f.0: [8086:27b9] type 00 class 0x060100
[ 0.654065] pci 0000:00:1f.0: quirk: [io 0x0500-0x057f] claimed by ICH6 ACPI/GPIO/TCO
[ 0.654071] pci 0000:00:1f.0: quirk: [io 0x0480-0x04bf] claimed by ICH6 GPIO
[ 0.654076] pci 0000:00:1f.0: ICH7 LPC Generic IO decode 1 PIO at 02e0 (mask 001f)
[ 0.654080] pci 0000:00:1f.0: ICH7 LPC Generic IO decode 2 PIO at 0600 (mask 00ff)
[ 0.654084] pci 0000:00:1f.0: ICH7 LPC Generic IO decode 3 PIO at 0068 (mask 0007)
[ 0.654238] pci 0000:00:1f.2: [8086:27c4] type 00 class 0x010180
[ 0.654263] pci 0000:00:1f.2: reg 0x10: [io 0x4098-0x409f]
[ 0.654275] pci 0000:00:1f.2: reg 0x14: [io 0x40a8-0x40ab]
[ 0.654286] pci 0000:00:1f.2: reg 0x18: [io 0x40a0-0x40a7]
[ 0.654298] pci 0000:00:1f.2: reg 0x1c: [io 0x40ac-0x40af]
[ 0.654309] pci 0000:00:1f.2: reg 0x20: [io 0x4080-0x408f]
[ 0.654334] pci 0000:00:1f.2: legacy IDE quirk: reg 0x10: [io 0x01f0-0x01f7]
[ 0.654336] pci 0000:00:1f.2: legacy IDE quirk: reg 0x14: [io 0x03f6]
[ 0.654338] pci 0000:00:1f.2: legacy IDE quirk: reg 0x18: [io 0x0170-0x0177]
[ 0.654340] pci 0000:00:1f.2: legacy IDE quirk: reg 0x1c: [io 0x0376]
[ 0.654374] pci 0000:00:1f.2: PME# supported from D3hot
[ 0.654491] pci 0000:00:1f.3: [8086:27da] type 00 class 0x0c0500
[ 0.654570] pci 0000:00:1f.3: reg 0x20: [io 0x0400-0x041f]
[ 0.654771] pci 0000:00:1c.0: PCI bridge to [bus 01]
[ 0.654901] pci 0000:02:00.0: [8086:4222] type 00 class 0x028000
[ 0.654998] pci 0000:02:00.0: reg 0x10: [mem 0xe4100000-0xe4100fff]
[ 0.655448] pci 0000:02:00.0: PME# supported from D0 D3hot D3cold
[ 0.655653] pci 0000:02:00.0: disabling ASPM on pre-1.1 PCIe device. You can enable it with 'pcie_aspm=force'
[ 0.655680] pci 0000:00:1c.1: PCI bridge to [bus 02]
[ 0.655688] pci 0000:00:1c.1: bridge window [mem 0xe4100000-0xe41fffff]
[ 0.655758] pci 0000:00:1c.2: PCI bridge to [bus 03]
[ 0.655862] pci 0000:04:00.0: [10ec:8168] type 00 class 0x020000
[ 0.655907] pci 0000:04:00.0: reg 0x10: [io 0x3000-0x30ff]
[ 0.655948] pci 0000:04:00.0: reg 0x18: [mem 0xe4220000-0xe4220fff 64bit]
[ 0.655996] pci 0000:04:00.0: reg 0x30: [mem 0xe4200000-0xe421ffff pref]
[ 0.656011] pci 0000:04:00.0: enabling Extended Tags
[ 0.656134] pci 0000:04:00.0: supports D1 D2
[ 0.656136] pci 0000:04:00.0: PME# supported from D1 D2 D3hot D3cold
[ 0.656262] pci 0000:04:00.0: disabling ASPM on pre-1.1 PCIe device. You can enable it with 'pcie_aspm=force'
[ 0.656274] pci 0000:00:1c.3: PCI bridge to [bus 04]
[ 0.656279] pci 0000:00:1c.3: bridge window [io 0x3000-0x3fff]
[ 0.656284] pci 0000:00:1c.3: bridge window [mem 0xe4200000-0xe42fffff]
[ 0.656317] pci_bus 0000:05: extended config space not accessible
[ 0.656422] pci 0000:05:05.0: [104c:8039] type 02 class 0x060700
[ 0.656449] pci 0000:05:05.0: reg 0x10: [mem 0xe2004000-0xe2004fff]
[ 0.656493] pci 0000:05:05.0: supports D1 D2
[ 0.656495] pci 0000:05:05.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.656598] pci 0000:05:05.1: [104c:803a] type 00 class 0x0c0010
[ 0.656624] pci 0000:05:05.1: reg 0x10: [mem 0xe2008000-0xe20087ff]
[ 0.656638] pci 0000:05:05.1: reg 0x14: [mem 0xe0000000-0xe0003fff]
[ 0.656744] pci 0000:05:05.1: supports D1 D2
[ 0.656746] pci 0000:05:05.1: PME# supported from D0 D1 D2 D3hot
[ 0.656831] pci 0000:05:05.2: [104c:803b] type 00 class 0x018000
[ 0.656857] pci 0000:05:05.2: reg 0x10: [mem 0xe2005000-0xe2005fff]
[ 0.656971] pci 0000:05:05.2: supports D1 D2
[ 0.656973] pci 0000:05:05.2: PME# supported from D0 D1 D2 D3hot
[ 0.657061] pci 0000:05:05.3: [104c:803c] type 00 class 0x080501
[ 0.657086] pci 0000:05:05.3: reg 0x10: [mem 0xe2009000-0xe20090ff]
[ 0.657201] pci 0000:05:05.3: supports D1 D2
[ 0.657203] pci 0000:05:05.3: PME# supported from D0 D1 D2 D3hot
[ 0.657289] pci 0000:05:05.4: [104c:803d] type 00 class 0x078000
[ 0.657314] pci 0000:05:05.4: reg 0x10: [mem 0xe2006000-0xe2006fff]
[ 0.657329] pci 0000:05:05.4: reg 0x14: [mem 0xe2007000-0xe2007fff]
[ 0.657431] pci 0000:05:05.4: supports D1 D2
[ 0.657433] pci 0000:05:05.4: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.657562] pci 0000:00:1e.0: PCI bridge to [bus 05-06] (subtractive decode)
[ 0.657567] pci 0000:00:1e.0: bridge window [io 0x1000-0x2fff]
[ 0.657572] pci 0000:00:1e.0: bridge window [mem 0xe0000000-0xe20fffff]
[ 0.657579] pci 0000:00:1e.0: bridge window [mem 0xe2100000-0xe40fffff 64bit pref]
[ 0.657581] pci 0000:00:1e.0: bridge window [io 0x0000-0x0cf7 window] (subtractive decode)
[ 0.657584] pci 0000:00:1e.0: bridge window [io 0x0d00-0xffff window] (subtractive decode)
[ 0.657586] pci 0000:00:1e.0: bridge window [mem 0x000a0000-0x000bffff window] (subtractive decode)
[ 0.657588] pci 0000:00:1e.0: bridge window [mem 0x000c0000-0x000c3fff window] (subtractive decode)
[ 0.657590] pci 0000:00:1e.0: bridge window [mem 0x000c8000-0x000cbfff window] (subtractive decode)
[ 0.657592] pci 0000:00:1e.0: bridge window [mem 0x000cc000-0x000cffff window] (subtractive decode)
[ 0.657594] pci 0000:00:1e.0: bridge window [mem 0x000d0000-0x000d3fff window] (subtractive decode)
[ 0.657597] pci 0000:00:1e.0: bridge window [mem 0x000d4000-0x000d7fff window] (subtractive decode)
[ 0.657599] pci 0000:00:1e.0: bridge window [mem 0x000d8000-0x000dbfff window] (subtractive decode)
[ 0.657601] pci 0000:00:1e.0: bridge window [mem 0x000dc000-0x000dffff window] (subtractive decode)
[ 0.657603] pci 0000:00:1e.0: bridge window [mem 0x000e0000-0x000e3fff window] (subtractive decode)
[ 0.657605] pci 0000:00:1e.0: bridge window [mem 0x000e4000-0x000e7fff window] (subtractive decode)
[ 0.657608] pci 0000:00:1e.0: bridge window [mem 0x000e8000-0x000ebfff window] (subtractive decode)
[ 0.657610] pci 0000:00:1e.0: bridge window [mem 0x000ec000-0x000effff window] (subtractive decode)
[ 0.657612] pci 0000:00:1e.0: bridge window [mem 0x000f0000-0x000fffff window] (subtractive decode)
[ 0.657614] pci 0000:00:1e.0: bridge window [mem 0xc0000000-0xfebfffff window] (subtractive decode)
[ 0.657616] pci 0000:00:1e.0: bridge window [mem 0xfed40000-0xfed44fff window] (subtractive decode)
[ 0.657653] pci_bus 0000:06: extended config space not accessible
[ 0.657681] pci_bus 0000:06: busn_res: [bus 06] end can not be updated to 09
[ 0.657686] pci 0000:00:1e.0: bridge has subordinate 06 but max busn 09
[ 0.657855] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 *10 12 14 15)
[ 0.657925] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 11 12 14 15) *10
[ 0.657993] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 7 *10 12 14 15)
[ 0.658064] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 11 12 14 15) *10
[ 0.658132] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 10 12 14 15) *0, disabled.
[ 0.658206] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 11 12 14 15) *0, disabled.
[ 0.658274] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 7 *10 12 14 15)
[ 0.658341] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 7 11 12 14 15) *10
[ 0.659317] ACPI: EC: interrupt unblocked
[ 0.659347] ACPI: EC: event unblocked
[ 0.659358] ACPI: \_SB_.PCI0.LPCB.EC0_: GPE=0x17, EC_CMD/EC_SC=0x66, EC_DATA=0x62
[ 0.659361] ACPI: \_SB_.PCI0.LPCB.EC0_: Used as boot DSDT EC to handle transactions and events
[ 0.659453] pci 0000:00:02.0: vgaarb: setting as boot VGA device
[ 0.659453] pci 0000:00:02.0: vgaarb: VGA device added: decodes=io+mem,owns=io+mem,locks=none
[ 0.659453] pci 0000:00:02.0: vgaarb: bridge control possible
[ 0.659453] vgaarb: loaded
[ 0.659453] pps_core: LinuxPPS API ver. 1 registered
[ 0.659453] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it>
[ 0.659453] PTP clock support registered
[ 0.659453] EDAC MC: Ver: 3.0.0
[ 0.659453] PCI: Using ACPI for IRQ routing
[ 0.662363] PCI: pci_cache_line_size set to 64 bytes
[ 0.662457] e820: reserve RAM buffer [mem 0x0009fc00-0x0009ffff]
[ 0.662458] e820: reserve RAM buffer [mem 0xbf313000-0xbfffffff]
[ 0.662909] HPET: 3 timers in total, 0 timers will be used for per-cpu timer
[ 0.662918] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0
[ 0.662924] hpet0: 3 comparators, 64-bit 14.318180 MHz counter
[ 0.663194] clocksource: Switched to clocksource tsc-early
[ 0.681507] VFS: Disk quotas dquot_6.6.0
[ 0.681536] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[ 0.681744] AppArmor: AppArmor Filesystem Enabled
[ 0.681779] pnp: PnP ACPI init
[ 0.935199] system 00:00: [mem 0xfed1c000-0xfed1ffff] has been reserved
[ 0.935202] system 00:00: [mem 0xfed14000-0xfed17fff] has been reserved
[ 0.935205] system 00:00: [mem 0xfed18000-0xfed18fff] has been reserved
[ 0.935207] system 00:00: [mem 0xfed19000-0xfed19fff] has been reserved
[ 0.935210] system 00:00: [mem 0xf0000000-0xf3ffffff] has been reserved
[ 0.935212] system 00:00: [mem 0xfed20000-0xfed3ffff] has been reserved
[ 0.935215] system 00:00: [mem 0xfed40000-0xfed44fff] has been reserved
[ 0.935217] system 00:00: [mem 0xfed45000-0xfed8ffff] has been reserved
[ 0.935228] system 00:00: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.935545] system 00:01: [mem 0xfed00000-0xfed003ff] has been reserved
[ 0.935552] system 00:01: Plug and Play ACPI device, IDs PNP0103 PNP0c01 (active)
[ 0.935635] system 00:02: [io 0x0800-0x080f] has been reserved
[ 0.935638] system 00:02: [io 0x0500-0x057f] has been reserved
[ 0.935640] system 00:02: [io 0x0480-0x04bf] has been reserved
[ 0.935647] system 00:02: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.935679] pnp 00:03: Plug and Play ACPI device, IDs PNP0b00 (active)
[ 0.936073] pnp 00:04: Plug and Play ACPI device, IDs PNP0501 (active)
[ 0.936221] pnp 00:05: Plug and Play ACPI device, IDs PNP0501 (disabled)
[ 0.936592] pnp 00:06: Plug and Play ACPI device, IDs PNP0501 (active)
[ 0.936960] pnp 00:07: Plug and Play ACPI device, IDs PNP0501 (active)
[ 0.937008] pnp 00:08: Plug and Play ACPI device, IDs PNP0303 PNP030b (active)
[ 0.937051] pnp 00:09: Plug and Play ACPI device, IDs PNP0f13 (active)
[ 0.937087] pnp: PnP ACPI: found 10 devices
[ 0.944322] clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns
[ 0.944345] pci 0000:00:1c.0: bridge window [io 0x1000-0x0fff] to [bus 01] add_size 1000
[ 0.944349] pci 0000:00:1c.0: bridge window [mem 0x00100000-0x000fffff 64bit pref] to [bus 01] add_size 200000 add_align 100000
[ 0.944352] pci 0000:00:1c.0: bridge window [mem 0x00100000-0x000fffff] to [bus 01] add_size 200000 add_align 100000
[ 0.944411] pci 0000:00:1c.0: BAR 14: assigned [mem 0xc0000000-0xc01fffff]
[ 0.944423] pci 0000:00:1c.0: BAR 15: assigned [mem 0xc0200000-0xc03fffff 64bit pref]
[ 0.944427] pci 0000:00:1c.0: BAR 13: assigned [io 0x5000-0x5fff]
[ 0.944431] pci 0000:00:1c.0: PCI bridge to [bus 01]
[ 0.944435] pci 0000:00:1c.0: bridge window [io 0x5000-0x5fff]
[ 0.944443] pci 0000:00:1c.0: bridge window [mem 0xc0000000-0xc01fffff]
[ 0.944448] pci 0000:00:1c.0: bridge window [mem 0xc0200000-0xc03fffff 64bit pref]
[ 0.944456] pci 0000:00:1c.1: PCI bridge to [bus 02]
[ 0.944462] pci 0000:00:1c.1: bridge window [mem 0xe4100000-0xe41fffff]
[ 0.944473] pci 0000:00:1c.2: PCI bridge to [bus 03]
[ 0.944488] pci 0000:00:1c.3: PCI bridge to [bus 04]
[ 0.944491] pci 0000:00:1c.3: bridge window [io 0x3000-0x3fff]
[ 0.944497] pci 0000:00:1c.3: bridge window [mem 0xe4200000-0xe42fffff]
[ 0.944516] pci 0000:05:05.0: BAR 15: assigned [mem 0xc4000000-0xc7ffffff pref]
[ 0.944524] pci 0000:05:05.0: BAR 16: assigned [mem 0xc8000000-0xcbffffff]
[ 0.944526] pci 0000:05:05.0: BAR 13: assigned [io 0x1000-0x10ff]
[ 0.944529] pci 0000:05:05.0: BAR 14: assigned [io 0x1400-0x14ff]
[ 0.944531] pci 0000:05:05.0: CardBus bridge to [bus 06]
[ 0.944533] pci 0000:05:05.0: bridge window [io 0x1000-0x10ff]
[ 0.944539] pci 0000:05:05.0: bridge window [io 0x1400-0x14ff]
[ 0.944544] pci 0000:05:05.0: bridge window [mem 0xc4000000-0xc7ffffff pref]
[ 0.944549] pci 0000:05:05.0: bridge window [mem 0xc8000000-0xcbffffff]
[ 0.944555] pci 0000:00:1e.0: PCI bridge to [bus 05-06]
[ 0.944559] pci 0000:00:1e.0: bridge window [io 0x1000-0x2fff]
[ 0.944565] pci 0000:00:1e.0: bridge window [mem 0xe0000000-0xe20fffff]
[ 0.944570] pci 0000:00:1e.0: bridge window [mem 0xe2100000-0xe40fffff 64bit pref]
[ 0.944578] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7 window]
[ 0.944580] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff window]
[ 0.944582] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff window]
[ 0.944584] pci_bus 0000:00: resource 7 [mem 0x000c0000-0x000c3fff window]
[ 0.944586] pci_bus 0000:00: resource 8 [mem 0x000c8000-0x000cbfff window]
[ 0.944588] pci_bus 0000:00: resource 9 [mem 0x000cc000-0x000cffff window]
[ 0.944590] pci_bus 0000:00: resource 10 [mem 0x000d0000-0x000d3fff window]
[ 0.944593] pci_bus 0000:00: resource 11 [mem 0x000d4000-0x000d7fff window]
[ 0.944594] pci_bus 0000:00: resource 12 [mem 0x000d8000-0x000dbfff window]
[ 0.944597] pci_bus 0000:00: resource 13 [mem 0x000dc000-0x000dffff window]
[ 0.944599] pci_bus 0000:00: resource 14 [mem 0x000e0000-0x000e3fff window]
[ 0.944601] pci_bus 0000:00: resource 15 [mem 0x000e4000-0x000e7fff window]
[ 0.944603] pci_bus 0000:00: resource 16 [mem 0x000e8000-0x000ebfff window]
[ 0.944605] pci_bus 0000:00: resource 17 [mem 0x000ec000-0x000effff window]
[ 0.944607] pci_bus 0000:00: resource 18 [mem 0x000f0000-0x000fffff window]
[ 0.944609] pci_bus 0000:00: resource 19 [mem 0xc0000000-0xfebfffff window]
[ 0.944611] pci_bus 0000:00: resource 20 [mem 0xfed40000-0xfed44fff window]
[ 0.944613] pci_bus 0000:01: resource 0 [io 0x5000-0x5fff]
[ 0.944615] pci_bus 0000:01: resource 1 [mem 0xc0000000-0xc01fffff]
[ 0.944617] pci_bus 0000:01: resource 2 [mem 0xc0200000-0xc03fffff 64bit pref]
[ 0.944619] pci_bus 0000:02: resource 1 [mem 0xe4100000-0xe41fffff]
[ 0.944622] pci_bus 0000:04: resource 0 [io 0x3000-0x3fff]
[ 0.944624] pci_bus 0000:04: resource 1 [mem 0xe4200000-0xe42fffff]
[ 0.944626] pci_bus 0000:05: resource 0 [io 0x1000-0x2fff]
[ 0.944628] pci_bus 0000:05: resource 1 [mem 0xe0000000-0xe20fffff]
[ 0.944630] pci_bus 0000:05: resource 2 [mem 0xe2100000-0xe40fffff 64bit pref]
[ 0.944632] pci_bus 0000:05: resource 4 [io 0x0000-0x0cf7 window]
[ 0.944634] pci_bus 0000:05: resource 5 [io 0x0d00-0xffff window]
[ 0.944636] pci_bus 0000:05: resource 6 [mem 0x000a0000-0x000bffff window]
[ 0.944638] pci_bus 0000:05: resource 7 [mem 0x000c0000-0x000c3fff window]
[ 0.944640] pci_bus 0000:05: resource 8 [mem 0x000c8000-0x000cbfff window]
[ 0.944642] pci_bus 0000:05: resource 9 [mem 0x000cc000-0x000cffff window]
[ 0.944644] pci_bus 0000:05: resource 10 [mem 0x000d0000-0x000d3fff window]
[ 0.944646] pci_bus 0000:05: resource 11 [mem 0x000d4000-0x000d7fff window]
[ 0.944649] pci_bus 0000:05: resource 12 [mem 0x000d8000-0x000dbfff window]
[ 0.944651] pci_bus 0000:05: resource 13 [mem 0x000dc000-0x000dffff window]
[ 0.944653] pci_bus 0000:05: resource 14 [mem 0x000e0000-0x000e3fff window]
[ 0.944655] pci_bus 0000:05: resource 15 [mem 0x000e4000-0x000e7fff window]
[ 0.944657] pci_bus 0000:05: resource 16 [mem 0x000e8000-0x000ebfff window]
[ 0.944659] pci_bus 0000:05: resource 17 [mem 0x000ec000-0x000effff window]
[ 0.944661] pci_bus 0000:05: resource 18 [mem 0x000f0000-0x000fffff window]
[ 0.944663] pci_bus 0000:05: resource 19 [mem 0xc0000000-0xfebfffff window]
[ 0.944665] pci_bus 0000:05: resource 20 [mem 0xfed40000-0xfed44fff window]
[ 0.944667] pci_bus 0000:06: resource 0 [io 0x1000-0x10ff]
[ 0.944669] pci_bus 0000:06: resource 1 [io 0x1400-0x14ff]
[ 0.944671] pci_bus 0000:06: resource 2 [mem 0xc4000000-0xc7ffffff pref]
[ 0.944673] pci_bus 0000:06: resource 3 [mem 0xc8000000-0xcbffffff]
[ 0.944785] NET: Registered protocol family 2
[ 0.945013] tcp_listen_portaddr_hash hash table entries: 2048 (order: 3, 32768 bytes)
[ 0.945049] TCP established hash table entries: 32768 (order: 6, 262144 bytes)
[ 0.945223] TCP bind hash table entries: 32768 (order: 7, 524288 bytes)
[ 0.945504] TCP: Hash tables configured (established 32768 bind 32768)
[ 0.945584] UDP hash table entries: 2048 (order: 4, 65536 bytes)
[ 0.945621] UDP-Lite hash table entries: 2048 (order: 4, 65536 bytes)
[ 0.945711] NET: Registered protocol family 1
[ 0.945732] pci 0000:00:02.0: Video device with shadowed ROM at [mem 0x000c0000-0x000dffff]
[ 0.946732] PCI: CLS 64 bytes, default 64
[ 0.946822] Unpacking initramfs...
[ 1.935627] Freeing initrd memory: 43432K
[ 1.936952] Initialise system trusted keyrings
[ 1.937072] workingset: timestamp_bits=40 max_order=20 bucket_order=0
[ 1.939574] zbud: loaded
[ 1.939927] pstore: using deflate compression
[ 2.236630] Key type asymmetric registered
[ 2.236632] Asymmetric key parser 'x509' registered
[ 2.236656] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 247)
[ 2.236707] io scheduler noop registered
[ 2.236708] io scheduler deadline registered
[ 2.236769] io scheduler cfq registered (default)
[ 2.236771] io scheduler mq-deadline registered
[ 2.236967] pcieport 0000:00:1c.0: enabling device (0104 -> 0107)
[ 2.237984] pcieport 0000:00:1c.0: Signaling PME with IRQ 24
[ 2.238016] pcieport 0000:00:1c.1: Signaling PME with IRQ 25
[ 2.238049] pcieport 0000:00:1c.2: Signaling PME with IRQ 26
[ 2.238079] pcieport 0000:00:1c.3: Signaling PME with IRQ 27
[ 2.238110] pciehp 0000:00:1c.0:pcie004: Slot #0 AttnBtn- PwrCtrl- MRL- AttnInd- PwrInd- HotPlug+ Surprise+ Interlock- NoCompl- LLActRep+ (with Cmd Compl erratum)
[ 2.238238] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[ 2.238261] intel_idle: does not run on family 6 model 15
[ 2.238431] Monitor-Mwait will be used to enter C-1 state
[ 2.238441] tsc: Marking TSC unstable due to TSC halts in idle
[ 2.238643] clocksource: Switched to clocksource hpet
[ 2.238907] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
[ 2.259590] 00:04: ttyS0 at I/O 0x3f8 (irq = 4, base_baud = 115200) is a 16550A
[ 2.259735] serial 00:05: [io 0x02f8-0x02ff]
[ 2.259802] serial 00:05: [irq 3]
[ 2.260476] serial 00:05: activated
[ 2.281132] 00:05: ttyS1 at I/O 0x2f8 (irq = 3, base_baud = 115200) is a 16550A
[ 2.301896] 00:06: ttyS2 at I/O 0x3e8 (irq = 5, base_baud = 115200) is a 16550A
[ 2.322674] 00:07: ttyS3 at I/O 0x2e8 (irq = 5, base_baud = 115200) is a 16550A
[ 2.323092] Linux agpgart interface v0.103
[ 2.323246] AMD IOMMUv2 driver by Joerg Roedel <jroedel@suse.de>
[ 2.323247] AMD IOMMUv2 functionality not available on this system
[ 2.323527] i8042: PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at 0x60,0x64 irq 1,12
[ 2.325513] i8042: Detected active multiplexing controller, rev 1.1
[ 2.326762] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 2.326768] serio: i8042 AUX0 port at 0x60,0x64 irq 12
[ 2.326810] serio: i8042 AUX1 port at 0x60,0x64 irq 12
[ 2.326848] serio: i8042 AUX2 port at 0x60,0x64 irq 12
[ 2.326883] serio: i8042 AUX3 port at 0x60,0x64 irq 12
[ 2.327077] mousedev: PS/2 mouse device common for all mice
[ 2.327138] rtc_cmos 00:03: RTC can wake from S4
[ 2.327346] rtc_cmos 00:03: registered as rtc0
[ 2.327374] rtc_cmos 00:03: alarms up to one month, y3k, 242 bytes nvram, hpet irqs
[ 2.327423] ledtrig-cpu: registered to indicate activity on CPUs
[ 2.327914] NET: Registered protocol family 10
[ 2.334220] Segment Routing with IPv6
[ 2.334252] mip6: Mobile IPv6
[ 2.334255] NET: Registered protocol family 17
[ 2.334261] mpls_gso: MPLS GSO support
[ 2.334495] microcode: sig=0x6f6, pf=0x20, revision=0xd1
[ 2.334582] microcode: Microcode Update Driver: v2.2.
[ 2.334824] registered taskstats version 1
[ 2.334825] Loading compiled-in X.509 certificates
[ 2.351866] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input0
[ 2.403770] Loaded X.509 cert 'secure-boot-test-key-lfaraone: 97c1b25cddf9873ca78a58f3d73bf727d2cf78ff'
[ 2.403795] zswap: loaded using pool lzo/zbud
[ 2.404001] AppArmor: AppArmor sha1 policy hashing enabled
[ 2.404568] rtc_cmos 00:03: setting system clock to 2018-12-20 15:42:11 UTC (1545320531)
[ 2.404601] Unstable clock detected, switching default tracing clock to "global"
If you want to keep using the local clock, then add:
"trace_clock=local"
on the kernel command line
[ 2.407488] Freeing unused kernel image memory: 1572K
[ 2.418262] Write protecting the kernel read-only data: 16384k
[ 2.419704] Freeing unused kernel image memory: 2028K
[ 2.420333] Freeing unused kernel image memory: 904K
[ 2.432698] x86/mm: Checked W+X mappings: passed, no W+X pages found.
[ 2.432789] x86/mm: Checking user space page tables
[ 2.445141] x86/mm: Checked W+X mappings: passed, no W+X pages found.
[ 2.445144] Run /init as init process
[ 2.558140] input: Lid Switch as /devices/LNXSYSTM:00/PNP0C0D:00/input/input4
[ 2.558154] ACPI: Lid Switch [LID0]
[ 2.564002] input: Sleep Button as /devices/LNXSYSTM:00/PNP0C0E:00/input/input5
[ 2.564020] ACPI: Sleep Button [SLPB]
[ 2.564096] input: Power Button as /devices/LNXSYSTM:00/PNP0C0C:00/input/input6
[ 2.566796] ACPI: Power Button [PWRB]
[ 2.566883] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input7
[ 2.566900] ACPI: Power Button [PWRF]
[ 2.610054] ACPI Warning: SystemIO range 0x0000000000000528-0x000000000000052F conflicts with OpRegion 0x0000000000000500-0x000000000000057F (\PMIO) (20180810/utaddress-213)
[ 2.610063] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[ 2.610066] ACPI Warning: SystemIO range 0x00000000000004B0-0x00000000000004BF conflicts with OpRegion 0x0000000000000480-0x00000000000004BB (\GPIO) (20180810/utaddress-213)
[ 2.610071] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[ 2.610072] ACPI Warning: SystemIO range 0x0000000000000480-0x00000000000004AF conflicts with OpRegion 0x0000000000000480-0x00000000000004BB (\GPIO) (20180810/utaddress-213)
[ 2.610077] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[ 2.610078] lpc_ich: Resource conflict(s) found affecting gpio_ich
[ 2.648377] ACPI: bus type USB registered
[ 2.648414] usbcore: registered new interface driver usbfs
[ 2.648428] usbcore: registered new interface driver hub
[ 2.648463] usbcore: registered new device driver usb
[ 2.652686] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 2.655436] ehci-pci: EHCI PCI platform driver
[ 2.655637] ehci-pci 0000:00:1d.7: EHCI Host Controller
[ 2.655647] ehci-pci 0000:00:1d.7: new USB bus registered, assigned bus number 1
[ 2.655664] ehci-pci 0000:00:1d.7: debug port 1
[ 2.658603] ACPI: Invalid active0 threshold
[ 2.659455] thermal LNXTHERM:00: registered as thermal_zone0
[ 2.659457] ACPI: Thermal Zone [THRM] (44 C)
[ 2.659590] ehci-pci 0000:00:1d.7: cache line size of 64 is not supported
[ 2.661909] i801_smbus 0000:00:1f.3: SMBus using PCI interrupt
[ 2.662137] uhci_hcd: USB Universal Host Controller Interface driver
[ 2.663244] SCSI subsystem initialized
[ 2.664451] ehci-pci 0000:00:1d.7: irq 23, io mem 0xe4444000
[ 2.670295] libphy: r8169: probed
[ 2.670496] sdhci: Secure Digital Host Controller Interface driver
[ 2.670497] sdhci: Copyright(c) Pierre Ossman
[ 2.670929] r8169 0000:04:00.0 eth0: RTL8168b/8111b, 00:40:d0:e4:58:4b, XID 38000000, IRQ 28
[ 2.670932] r8169 0000:04:00.0 eth0: jumbo features [frames: 4080 bytes, tx checksumming: ko]
[ 2.674354] sdhci-pci 0000:05:05.3: SDHCI controller found [104c:803c] (rev 0)
[ 2.674478] mmc0 bounce up to 128 segments into one, max segment size 65536 bytes
[ 2.678213] ehci-pci 0000:00:1d.7: USB 2.0 started, EHCI 1.00
[ 2.678329] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 4.19
[ 2.678332] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 2.678334] usb usb1: Product: EHCI Host Controller
[ 2.678336] usb usb1: Manufacturer: Linux 4.19.0-1-amd64 ehci_hcd
[ 2.678338] usb usb1: SerialNumber: 0000:00:1d.7
[ 2.678534] hub 1-0:1.0: USB hub found
[ 2.678545] hub 1-0:1.0: 8 ports detected
[ 2.679019] uhci_hcd 0000:00:1d.0: UHCI Host Controller
[ 2.679029] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 2
[ 2.679039] uhci_hcd 0000:00:1d.0: detected 2 ports
[ 2.679065] uhci_hcd 0000:00:1d.0: irq 23, io base 0x00004000
[ 2.679152] usb usb2: New USB device found, idVendor=1d6b, idProduct=0001, bcdDevice= 4.19
[ 2.679155] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 2.679157] usb usb2: Product: UHCI Host Controller
[ 2.679159] usb usb2: Manufacturer: Linux 4.19.0-1-amd64 uhci_hcd
[ 2.679161] usb usb2: SerialNumber: 0000:00:1d.0
[ 2.679298] hub 2-0:1.0: USB hub found
[ 2.679308] hub 2-0:1.0: 2 ports detected
[ 2.679575] uhci_hcd 0000:00:1d.1: UHCI Host Controller
[ 2.679583] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 3
[ 2.679591] uhci_hcd 0000:00:1d.1: detected 2 ports
[ 2.679615] uhci_hcd 0000:00:1d.1: irq 19, io base 0x00004020
[ 2.679690] usb usb3: New USB device found, idVendor=1d6b, idProduct=0001, bcdDevice= 4.19
[ 2.679693] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 2.679695] usb usb3: Product: UHCI Host Controller
[ 2.679697] usb usb3: Manufacturer: Linux 4.19.0-1-amd64 uhci_hcd
[ 2.679699] usb usb3: SerialNumber: 0000:00:1d.1
[ 2.679837] hub 3-0:1.0: USB hub found
[ 2.679847] hub 3-0:1.0: 2 ports detected
[ 2.680091] uhci_hcd 0000:00:1d.2: UHCI Host Controller
[ 2.680099] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 4
[ 2.680107] uhci_hcd 0000:00:1d.2: detected 2 ports
[ 2.680141] uhci_hcd 0000:00:1d.2: irq 18, io base 0x00004040
[ 2.680219] usb usb4: New USB device found, idVendor=1d6b, idProduct=0001, bcdDevice= 4.19
[ 2.680221] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 2.680223] usb usb4: Product: UHCI Host Controller
[ 2.680225] usb usb4: Manufacturer: Linux 4.19.0-1-amd64 uhci_hcd
[ 2.680228] usb usb4: SerialNumber: 0000:00:1d.2
[ 2.680369] hub 4-0:1.0: USB hub found
[ 2.680379] hub 4-0:1.0: 2 ports detected
[ 2.680627] uhci_hcd 0000:00:1d.3: UHCI Host Controller
[ 2.680634] uhci_hcd 0000:00:1d.3: new USB bus registered, assigned bus number 5
[ 2.680643] uhci_hcd 0000:00:1d.3: detected 2 ports
[ 2.680676] uhci_hcd 0000:00:1d.3: irq 16, io base 0x00004060
[ 2.680749] usb usb5: New USB device found, idVendor=1d6b, idProduct=0001, bcdDevice= 4.19
[ 2.680751] usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 2.680753] usb usb5: Product: UHCI Host Controller
[ 2.680756] usb usb5: Manufacturer: Linux 4.19.0-1-amd64 uhci_hcd
[ 2.680758] usb usb5: SerialNumber: 0000:00:1d.3
[ 2.680901] hub 5-0:1.0: USB hub found
[ 2.680911] hub 5-0:1.0: 2 ports detected
[ 2.681717] mmc0: SDHCI controller on PCI [0000:05:05.3] using DMA
[ 2.718128] firewire_ohci 0000:05:05.1: added OHCI v1.10 device as card 0, 4 IR + 8 IT contexts, quirks 0x2
[ 2.725180] pci 0000:00:00.0: Intel 945GM Chipset
[ 2.725194] pci 0000:00:00.0: detected gtt size: 262144K total, 262144K mappable
[ 2.726222] pci 0000:00:00.0: detected 8192K stolen memory
[ 2.726256] [drm] Replacing VGA console driver
[ 2.727006] Console: switching to colour dummy device 80x25
[ 2.727102] libata version 3.00 loaded.
[ 2.728722] ata_piix 0000:00:1f.2: version 2.13
[ 2.728847] ata_piix 0000:00:1f.2: MAP [ P0 P2 IDE IDE ]
[ 2.729512] scsi host0: ata_piix
[ 2.729745] scsi host1: ata_piix
[ 2.729818] ata1: SATA max UDMA/133 cmd 0x1f0 ctl 0x3f6 bmdma 0x4080 irq 14
[ 2.729820] ata2: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0x4088 irq 15
[ 2.780809] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
[ 2.780811] [drm] Driver supports precise vblank timestamp query.
[ 2.781134] i915 0000:00:02.0: vgaarb: changed VGA decodes: olddecodes=io+mem,decodes=io+mem:owns=io+mem
[ 2.789968] random: fast init done
[ 2.795402] [drm] RC6 disabled, disabling runtime PM support
[ 2.795456] [drm] Initialized overlay support.
[ 2.796271] [drm] Initialized i915 1.6.0 20180719 for 0000:00:02.0 on minor 0
[ 2.796463] ACPI: Video Device [GFX0] (multi-head: yes rom: no post: no)
[ 2.796809] acpi device:03: registered as cooling_device2
[ 2.797024] input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:00/input/input13
[ 2.814568] fbcon: inteldrmfb (fb0) is primary device
[ 2.886250] Console: switching to colour frame buffer device 160x50
[ 2.893151] ata2.00: ATAPI: MATSHITADVD-RAM UJ-850S, 1.60, max UDMA/33
[ 2.893530] ata1.00: ATA-8: FUJITSU MHW2120BH, 00000012, max UDMA/100
[ 2.893532] ata1.00: 234441648 sectors, multi 16: LBA48 NCQ (depth 0/32)
[ 2.900702] i915 0000:00:02.0: fb0: inteldrmfb frame buffer device
[ 2.901272] scsi 0:0:0:0: Direct-Access ATA FUJITSU MHW2120B 0012 PQ: 0 ANSI: 5
[ 2.903369] scsi 1:0:0:0: CD-ROM MATSHITA DVD-RAM UJ-850S 1.60 PQ: 0 ANSI: 5
[ 2.941051] sd 0:0:0:0: [sda] 234441648 512-byte logical blocks: (120 GB/112 GiB)
[ 2.941065] sd 0:0:0:0: [sda] Write Protect is off
[ 2.941068] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 2.941086] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 2.959993] sr 1:0:0:0: [sr0] scsi3-mmc drive: 24x/24x writer dvd-ram cd/rw xa/form2 cdda tray
[ 2.959996] cdrom: Uniform CD-ROM driver Revision: 3.20
[ 2.960368] sr 1:0:0:0: Attached scsi CD-ROM sr0
[ 3.047914] sda: sda1 sda2 < sda5 >
[ 3.048447] sd 0:0:0:0: [sda] Attached SCSI disk
[ 3.222234] usb 4-1: new full-speed USB device number 2 using uhci_hcd
[ 3.226442] firewire_core 0000:05:05.1: created device fw0: GUID 0040d00100437d35, S400
[ 3.431277] usb 4-1: New USB device found, idVendor=0a12, idProduct=0001, bcdDevice=19.58
[ 3.431280] usb 4-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[ 3.448001] psmouse serio4: synaptics: Touchpad model: 1, fw: 6.2, id: 0x92a0b1, caps: 0xa04713/0x200000/0x0/0x0, board id: 0, fw id: 50149
[ 3.484824] input: SynPS/2 Synaptics TouchPad as /devices/platform/i8042/serio4/input/input12
[ 3.738200] raid6: sse2x1 gen() 2865 MB/s
[ 3.806193] raid6: sse2x1 xor() 3387 MB/s
[ 3.874207] raid6: sse2x2 gen() 3427 MB/s
[ 3.942193] raid6: sse2x2 xor() 4136 MB/s
[ 4.010201] raid6: sse2x4 gen() 6126 MB/s
[ 4.078196] raid6: sse2x4 xor() 4572 MB/s
[ 4.078198] raid6: using algorithm sse2x4 gen() 6126 MB/s
[ 4.078199] raid6: .... xor() 4572 MB/s, rmw enabled
[ 4.078200] raid6: using ssse3x2 recovery algorithm
[ 4.087875] xor: measuring software checksum speed
[ 4.126185] prefetch64-sse: 7627.000 MB/sec
[ 4.166185] generic_sse: 6783.000 MB/sec
[ 4.166187] xor: using function: prefetch64-sse (7627.000 MB/sec)
[ 4.266070] Btrfs loaded, crc32c=crc32c-generic
[ 4.520776] BTRFS: device fsid 749a2872-dfdf-4601-a982-fedcd6f615c4 devid 1 transid 121964 /dev/sda1
[ 4.556568] PM: Image not found (code -22)
[ 4.562239] usb 4-2: new full-speed USB device number 3 using uhci_hcd
[ 4.605242] BTRFS info (device sda1): disk space caching is enabled
[ 4.822208] usb 1-7: new high-speed USB device number 4 using ehci-pci
[ 4.967275] usb 4-2: New USB device found, idVendor=147e, idProduct=2016, bcdDevice= 0.01
[ 4.967281] usb 4-2: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[ 4.967286] usb 4-2: Product: Fingerprint Sensor
[ 4.967290] usb 4-2: Manufacturer: TouchStrip
[ 4.983757] usb 1-7: New USB device found, idVendor=05e3, idProduct=0608, bcdDevice= 7.02
[ 4.983760] usb 1-7: New USB device strings: Mfr=0, Product=1, SerialNumber=0
[ 4.983762] usb 1-7: Product: USB2.0 Hub
[ 4.984168] hub 1-7:1.0: USB hub found
[ 4.984505] hub 1-7:1.0: 4 ports detected
[ 7.051121] random: crng init done
[ 7.151030] systemd[1]: systemd 239 running in system mode. (+PAM +AUDIT +SELINUX +IMA +APPARMOR +SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ +LZ4 +SECCOMP +BLKID +ELFUTILS +KMOD -IDN2 +IDN -PCRE2 default-hierarchy=hybrid)
[ 7.170309] systemd[1]: Detected architecture x86-64.
[ 7.195546] systemd[1]: Set hostname to <t-rex>.
[ 9.690086] systemd[1]: Listening on fsck to fsckd communication Socket.
[ 9.690307] systemd[1]: Listening on udev Kernel Socket.
[ 9.690399] systemd[1]: Listening on initctl Compatibility Named Pipe.
[ 9.690428] systemd[1]: Reached target User and Group Name Lookups.
[ 9.696208] systemd[1]: Listening on Syslog Socket.
[ 9.696388] systemd[1]: Listening on Journal Audit Socket.
[ 9.696676] systemd[1]: Set up automount Arbitrary Executable File Formats File System Automount Point.
[ 10.113885] BTRFS info (device sda1): disk space caching is enabled
[ 10.499658] systemd-journald[255]: Received request to flush runtime journal from PID 1
[ 10.505507] RPC: Registered named UNIX socket transport module.
[ 10.505508] RPC: Registered udp transport module.
[ 10.505509] RPC: Registered tcp transport module.
[ 10.505510] RPC: Registered tcp NFSv4.1 backchannel transport module.
[ 10.571731] lp: driver loaded but no devices found
[ 10.641980] ppdev: user-space parallel port driver
[ 13.092476] audit: type=1400 audit(1545320542.184:2): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/bin/man" pid=302 comm="apparmor_parser"
[ 13.092481] audit: type=1400 audit(1545320542.184:3): apparmor="STATUS" operation="profile_load" profile="unconfined" name="man_filter" pid=302 comm="apparmor_parser"
[ 13.092485] audit: type=1400 audit(1545320542.184:4): apparmor="STATUS" operation="profile_load" profile="unconfined" name="man_groff" pid=302 comm="apparmor_parser"
[ 13.243979] audit: type=1400 audit(1545320542.336:5): apparmor="STATUS" operation="profile_load" profile="unconfined" name="libreoffice-oopslash" pid=303 comm="apparmor_parser"
[ 13.292405] audit: type=1400 audit(1545320542.384:6): apparmor="STATUS" operation="profile_load" profile="unconfined" name="libreoffice-senddoc" pid=304 comm="apparmor_parser"
[ 13.366063] audit: type=1400 audit(1545320542.456:7): apparmor="STATUS" operation="profile_load" profile="unconfined" name="libreoffice-xpdfimport" pid=305 comm="apparmor_parser"
[ 13.368138] audit: type=1400 audit(1545320542.460:8): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/telepathy/mission-control-5" pid=301 comm="apparmor_parser"
[ 13.368144] audit: type=1400 audit(1545320542.460:9): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/telepathy/telepathy-*" pid=301 comm="apparmor_parser"
[ 13.368147] audit: type=1400 audit(1545320542.460:10): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/telepathy/telepathy-*//pxgsettings" pid=301 comm="apparmor_parser"
[ 13.368151] audit: type=1400 audit(1545320542.460:11): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/telepathy/telepathy-*//sanitized_helper" pid=301 comm="apparmor_parser"
[ 14.942303] ACPI: AC Adapter [AC] (on-line)
[ 15.027453] battery: ACPI: Battery Slot [BAT0] (battery present)
[ 15.154542] battery: ACPI: Battery Slot [BAT1] (battery absent)
[ 15.166457] intel_rng: FWH not detected
[ 15.285861] yenta_cardbus 0000:05:05.0: CardBus bridge found [104c:ac48]
[ 15.285882] yenta_cardbus 0000:05:05.0: Enabling burst memory read transactions
[ 15.285888] yenta_cardbus 0000:05:05.0: Using CSCINT to route CSC interrupts to PCI
[ 15.285890] yenta_cardbus 0000:05:05.0: Routing CardBus interrupts to PCI
[ 15.285895] yenta_cardbus 0000:05:05.0: TI: mfunc 0x01aa1b22, devctl 0x64
[ 15.351982] sd 0:0:0:0: Attached scsi generic sg0 type 0
[ 15.352036] sr 1:0:0:0: Attached scsi generic sg1 type 5
[ 15.526997] yenta_cardbus 0000:05:05.0: ISA IRQ mask 0x0ce8, PCI irq 16
[ 15.527000] yenta_cardbus 0000:05:05.0: Socket status: 30000006
[ 15.527009] yenta_cardbus 0000:05:05.0: pcmcia: parent PCI bridge window: [io 0x1000-0x2fff]
[ 15.527012] yenta_cardbus 0000:05:05.0: pcmcia: parent PCI bridge window: [mem 0xe0000000-0xe20fffff]
[ 15.527015] pcmcia_socket pcmcia_socket0: cs: memory probe 0xe0000000-0xe20fffff:
[ 15.527019] excluding 0xe0000000-0xe020ffff 0xe1ef0000-0xe20fffff
[ 15.527030] yenta_cardbus 0000:05:05.0: pcmcia: parent PCI bridge window: [mem 0xe2100000-0xe40fffff 64bit pref]
[ 15.527032] pcmcia_socket pcmcia_socket0: cs: memory probe 0xe2100000-0xe40fffff:
[ 15.527037] excluding 0xe2100000-0xe40fffff
[ 15.917379] leds_ss4200: no LED devices found
[ 16.157194] input: PC Speaker as /devices/platform/pcspkr/input/input14
[ 16.606883] iTCO_vendor_support: vendor-support=0
[ 16.795518] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.11
[ 16.795594] iTCO_wdt: Found a ICH7-M or ICH7-U TCO device (Version=2, TCOBASE=0x0560)
[ 16.795761] iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0)
[ 16.869677] iwl3945: Intel(R) PRO/Wireless 3945ABG/BG Network Connection driver for Linux, in-tree:s
[ 16.869679] iwl3945: Copyright(c) 2003-2011 Intel Corporation
[ 16.869680] iwl3945: hw_scan is disabled
[ 16.940891] iwl3945 0000:02:00.0: Tunable channels: 13 802.11bg, 23 802.11a channels
[ 16.940895] iwl3945 0000:02:00.0: Detected Intel Wireless WiFi Link 3945ABG
[ 17.139207] ieee80211 phy0: Selected rate control algorithm 'iwl-3945-rs'
[ 17.159095] alg: No test for fips(ansi_cprng) (fips_ansi_cprng)
[ 17.847367] snd_hda_codec_realtek hdaudioC0D0: ALC262: SKU not ready 0x411111f0
[ 17.847774] snd_hda_codec_realtek hdaudioC0D0: autoconfig for ALC262: line_outs=1 (0x15/0x0/0x0/0x0/0x0) type:line
[ 17.847777] snd_hda_codec_realtek hdaudioC0D0: speaker_outs=1 (0x14/0x0/0x0/0x0/0x0)
[ 17.847779] snd_hda_codec_realtek hdaudioC0D0: hp_outs=1 (0x1b/0x0/0x0/0x0/0x0)
[ 17.847781] snd_hda_codec_realtek hdaudioC0D0: mono: mono_out=0x0
[ 17.847783] snd_hda_codec_realtek hdaudioC0D0: inputs:
[ 17.847786] snd_hda_codec_realtek hdaudioC0D0: Internal Mic=0x19
[ 17.847789] snd_hda_codec_realtek hdaudioC0D0: Front Mic=0x1a
[ 17.847791] snd_hda_codec_realtek hdaudioC0D0: Rear Mic=0x18
[ 17.916806] Bluetooth: Core ver 2.22
[ 17.916846] NET: Registered protocol family 31
[ 17.916848] Bluetooth: HCI device and connection manager initialized
[ 17.916855] Bluetooth: HCI socket layer initialized
[ 17.916859] Bluetooth: L2CAP socket layer initialized
[ 17.916871] Bluetooth: SCO socket layer initialized
[ 18.050513] input: HDA Digital PCBeep as /devices/pci0000:00/0000:00:1b.0/sound/card0/input15
[ 18.050816] input: HDA Intel Front Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input16
[ 18.050903] input: HDA Intel Rear Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input17
[ 18.050987] input: HDA Intel Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card0/input18
[ 18.051083] input: HDA Intel Front Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card0/input19
[ 18.065866] intel_powerclamp: No package C-state available
[ 18.438070] pcmcia_socket pcmcia_socket0: cs: memory probe 0x0c0000-0x0fffff:
[ 18.438081] excluding 0xc4000-0xc7fff 0xf0000-0xfffff
[ 18.438129] pcmcia_socket pcmcia_socket0: cs: memory probe 0xa0000000-0xa0ffffff:
[ 18.438154] excluding 0xa0000000-0xa0ffffff
[ 18.438209] pcmcia_socket pcmcia_socket0: cs: memory probe 0x60000000-0x60ffffff:
[ 18.438234] excluding 0x60000000-0x60ffffff
[ 18.652284] Adding 4789244k swap on /dev/sda5. Priority:-2 extents:1 across:4789244k FS
[ 18.736946] usbcore: registered new interface driver btusb
[ 24.450961] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
[ 24.450964] Bluetooth: BNEP filters: protocol multicast
[ 24.450972] Bluetooth: BNEP socket layer initialized
[ 28.293618] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 28.294254] RTL8211B Gigabit Ethernet r8169-400:00: attached PHY driver [RTL8211B Gigabit Ethernet] (mii_bus:phy_addr=r8169-400:00, irq=IGNORE)
[ 28.394340] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 28.401117] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
[ 28.610098] iwl3945 0000:02:00.0: firmware: direct-loading firmware iwlwifi-3945-2.ucode
[ 28.610107] iwl3945 0000:02:00.0: loaded firmware version 15.32.2.9
[ 28.692321] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
[ 28.771518] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
[ 29.076945] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
[ 32.527443] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
[ 35.943494] wlan0: authenticate with 70:3a:cb:bd:fd:e3
[ 35.947651] wlan0: send auth to 70:3a:cb:bd:fd:e3 (try 1/3)
[ 35.949136] wlan0: authenticated
[ 35.955962] wlan0: associate with 70:3a:cb:bd:fd:e3 (try 1/3)
[ 35.960412] wlan0: RX AssocResp from 70:3a:cb:bd:fd:e3 (capab=0x1011 status=0 aid=3)
[ 35.961684] wlan0: associated
[ 36.075021] wlan0: Limiting TX power to 20 (20 - 0) dBm as advertised by 70:3a:cb:bd:fd:e3
[ 36.075355] IPv6: ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
[ 36.075715] iwl3945 0000:02:00.0: Enabling power save might cause firmware crashes
[ 39.136410] fuse init (API version 7.27)
[ 73.761921] rfkill: input handler disabled
[ 77.231635] Bluetooth: RFCOMM TTY layer initialized
[ 77.231645] Bluetooth: RFCOMM socket layer initialized
[ 77.231654] Bluetooth: RFCOMM ver 1.11