| |
| |
| [NOTE ] coreboot-4.19-66-g3b74bad537 Fri Jan 20 17:41:18 UTC 2023 bootblock starting (log level: 7)... |
| [INFO ] Timestamp - end of bootblock: 7113092 |
| [INFO ] Timestamp - starting to load romstage: 7125613 |
| [DEBUG] FMAP: Found "FLASH" version 1.1 at 0x0. |
| [DEBUG] FMAP: base = 0xffc00000 size = 0x400000 #areas = 3 |
| [DEBUG] FMAP: area COREBOOT found @ 200 (4193792 bytes) |
| [INFO ] CBFS: mcache @0x00014e00 built for 14 files, used 0x314 of 0x4000 bytes |
| [INFO ] CBFS: Found 'fallback/romstage' @0x80 size 0x7060 in mcache @0x00014e2c |
| [INFO ] Timestamp - finished loading romstage: 7221596 |
| [DEBUG] BS: bootblock times (exec / console): total (unknown) / 0 ms |
| |
| |
| [NOTE ] coreboot-4.19-66-g3b74bad537 Fri Jan 20 17:41:18 UTC 2023 romstage starting (log level: 7)... |
| [INFO ] QEMU: firmware config interface detected |
| [INFO ] Firmware config version id: 3 |
| [INFO ] QEMU: firmware config: Found 'etc/e820' |
| [DEBUG] CBMEM: |
| [DEBUG] IMD: root @ 0x3ffff000 254 entries. |
| [DEBUG] IMD: root @ 0x3fffec00 62 entries. |
| [DEBUG] FMAP: area COREBOOT found @ 200 (4193792 bytes) |
| [INFO ] CBFS: Found 'fallback/postcar' @0x1cd80 size 0x8b00 in mcache @0x00015038 |
| [DEBUG] Loading module at 0x3ffce000 with entry 0x3ffce042. filesize: 0x7800 memsize: 0xdb58 |
| [DEBUG] Processing 600 relocs. Offset value of 0x3dfce000 |
| [INFO ] Timestamp - end of romstage: 14879090 |
| [DEBUG] BS: romstage times (exec / console): total (unknown) / 0 ms |
| |
| |
| [NOTE ] coreboot-4.19-66-g3b74bad537 Fri Jan 20 17:41:18 UTC 2023 postcar starting (log level: 7)... |
| [INFO ] Timestamp - start of postcar: 20241428 |
| [INFO ] Timestamp - end of postcar: 20248408 |
| [INFO ] Timestamp - starting to load ramstage: 20254095 |
| [DEBUG] FMAP: area COREBOOT found @ 200 (4193792 bytes) |
| [INFO ] CBFS: Found 'fallback/ramstage' @0xd040 size 0xea16 in mcache @0x3ffdd190 |
| [INFO ] Timestamp - starting LZMA decompress (ignore for x86): 20273751 |
| [INFO ] Timestamp - finished LZMA decompress (ignore for x86): 35450664 |
| [DEBUG] Loading module at 0x3ff99000 with entry 0x3ff99000. filesize: 0x227d0 memsize: 0x33118 |
| [DEBUG] Processing 3300 relocs. Offset value of 0x3bf99000 |
| [INFO ] Timestamp - finished loading ramstage: 35605948 |
| [DEBUG] BS: postcar times (exec / console): total (unknown) / 0 ms |
| |
| |
| [NOTE ] coreboot-4.19-66-g3b74bad537 Fri Jan 20 17:41:18 UTC 2023 ramstage starting (log level: 7)... |
| [INFO ] Timestamp - start of ramstage: 54344849 |
| [INFO ] Timestamp - device enumeration: 54369625 |
| [INFO ] Enumerating buses... |
| [DEBUG] Root Device scanning... |
| [DEBUG] CPU_CLUSTER: 0 enabled |
| [DEBUG] DOMAIN: 0000 enabled |
| [DEBUG] DOMAIN: 0000 scanning... |
| [DEBUG] PCI: pci_scan_bus for bus 00 |
| [DEBUG] PCI: 00:00.0 [8086/1237] enabled |
| [DEBUG] PCI: 00:01.0 [8086/7000] enabled |
| [DEBUG] PCI: 00:01.1 [8086/7010] enabled |
| [DEBUG] PCI: 00:01.3 [8086/7113] enabled |
| [DEBUG] PCI: 00:02.0 [1234/1111] enabled |
| [DEBUG] PCI: 00:03.0 [8086/100e] enabled |
| [DEBUG] PCI: 00:01.0 scanning... |
| [DEBUG] scan_bus: bus PCI: 00:01.0 finished in 0 msecs |
| [DEBUG] PCI: 00:01.3 scanning... |
| [DEBUG] scan_bus: bus PCI: 00:01.3 finished in 0 msecs |
| [DEBUG] scan_bus: bus DOMAIN: 0000 finished in 0 msecs |
| [DEBUG] scan_bus: bus Root Device finished in 0 msecs |
| [INFO ] done |
| [INFO ] Timestamp - device configuration: 56378822 |
| [DEBUG] found VGA at PCI: 00:02.0 |
| [DEBUG] Setting up VGA for PCI: 00:02.0 |
| [DEBUG] Setting PCI_BRIDGE_CTL_VGA for bridge DOMAIN: 0000 |
| [DEBUG] Setting PCI_BRIDGE_CTL_VGA for bridge Root Device |
| [INFO ] Allocating resources... |
| [INFO ] Reading resources... |
| [INFO ] QEMU: firmware config interface detected |
| [INFO ] Firmware config version id: 3 |
| [INFO ] QEMU: firmware config: Found 'etc/e820' |
| [DEBUG] QEMU: e820/res: 0xfeffc000 +0x00004000 |
| [DEBUG] QEMU: e820/ram: 0x00000000 + 0x40000000 |
| [DEBUG] QEMU: reserve ioports 0x0510-0x0511 [firmware-config] |
| [DEBUG] QEMU: reserve ioports 0x5658-0x5658 [vmware-port] |
| [DEBUG] QEMU: reserve ioports 0xae00-0xae0f [pci-hotplug] |
| [DEBUG] QEMU: reserve ioports 0xaf00-0xaf1f [cpu-hotplug] |
| [DEBUG] QEMU: reserve ioports 0xafe0-0xafe3 [piix4-gpe0] |
| [INFO ] Done reading resources. |
| [INFO ] === Resource allocator: DOMAIN: 0000 - Pass 1 (gathering requirements) === |
| [INFO ] === Resource allocator: DOMAIN: 0000 - Pass 2 (allocating resources) === |
| [DEBUG] DOMAIN: 0000 io: base: 0 size: 0 align: 0 gran: 0 limit: ffff |
| [DEBUG] update_constraints: DOMAIN: 0000 0d base 00000510 limit 00000511 io (fixed) |
| [DEBUG] update_constraints: DOMAIN: 0000 0e base 00005658 limit 00005658 io (fixed) |
| [DEBUG] update_constraints: DOMAIN: 0000 0f base 0000ae00 limit 0000ae0f io (fixed) |
| [DEBUG] update_constraints: DOMAIN: 0000 10 base 0000af00 limit 0000af1f io (fixed) |
| [DEBUG] update_constraints: DOMAIN: 0000 11 base 0000afe0 limit 0000afe3 io (fixed) |
| [DEBUG] update_constraints: PCI: 00:01.0 01 base 00000000 limit 00000fff io (fixed) |
| [DEBUG] update_constraints: PCI: 00:01.3 01 base 0000e400 limit 0000e43f io (fixed) |
| [DEBUG] update_constraints: PCI: 00:01.3 02 base 00000f00 limit 00000f0f io (fixed) |
| [INFO ] DOMAIN: 0000: Resource ranges: |
| [INFO ] * Base: 1000, Size: 4658, Tag: 100 |
| [INFO ] * Base: 5659, Size: 57a7, Tag: 100 |
| [INFO ] * Base: ae10, Size: f0, Tag: 100 |
| [INFO ] * Base: af20, Size: c0, Tag: 100 |
| [INFO ] * Base: afe4, Size: 341c, Tag: 100 |
| [INFO ] * Base: e440, Size: 1bc0, Tag: 100 |
| [DEBUG] PCI: 00:03.0 14 * [0xffc0 - 0xffff] limit: ffff io |
| [DEBUG] PCI: 00:01.1 20 * [0xffb0 - 0xffbf] limit: ffbf io |
| [DEBUG] DOMAIN: 0000 io: base: 0 size: 0 align: 0 gran: 0 limit: ffff done |
| [DEBUG] DOMAIN: 0000 mem: base: 0 size: 0 align: 0 gran: 0 limit: ffffffffff |
| [DEBUG] update_constraints: DOMAIN: 0000 0a base feffc000 limit feffffff mem (fixed) |
| [DEBUG] update_constraints: DOMAIN: 0000 0b base 00000000 limit 0009ffff mem (fixed) |
| [DEBUG] update_constraints: DOMAIN: 0000 0c base 000c0000 limit 3fffffff mem (fixed) |
| [DEBUG] update_constraints: DOMAIN: 0000 12 base 000a0000 limit 000bffff mem (fixed) |
| [DEBUG] update_constraints: DOMAIN: 0000 13 base 000c0000 limit 000fffff mem (fixed) |
| [DEBUG] update_constraints: DOMAIN: 0000 02 base fec00000 limit fecfffff mem (fixed) |
| [DEBUG] update_constraints: DOMAIN: 0000 03 base fee00000 limit fee0ffff mem (fixed) |
| [DEBUG] update_constraints: PCI: 00:00.0 00 base 00008000 limit 0000dfff mem (fixed) |
| [DEBUG] update_constraints: PCI: 00:01.0 02 base ff800000 limit ffffffff mem (fixed) |
| [DEBUG] update_constraints: PCI: 00:01.0 03 base fec00000 limit fec00fff mem (fixed) |
| [INFO ] DOMAIN: 0000: Resource ranges: |
| [INFO ] * Base: 40000000, Size: bec00000, Tag: 200 |
| [INFO ] * Base: fed00000, Size: 100000, Tag: 200 |
| [INFO ] * Base: fee10000, Size: 1ec000, Tag: 200 |
| [INFO ] * Base: ff000000, Size: 800000, Tag: 200 |
| [INFO ] * Base: 100000000, Size: ff00000000, Tag: 100200 |
| [DEBUG] PCI: 00:02.0 10 * [0xfd000000 - 0xfdffffff] limit: fdffffff prefmem |
| [DEBUG] PCI: 00:03.0 30 * [0xff7c0000 - 0xff7fffff] limit: ff7fffff mem |
| [DEBUG] PCI: 00:03.0 10 * [0xff7a0000 - 0xff7bffff] limit: ff7bffff mem |
| [DEBUG] PCI: 00:02.0 30 * [0xff790000 - 0xff79ffff] limit: ff79ffff mem |
| [DEBUG] PCI: 00:02.0 18 * [0xff78f000 - 0xff78ffff] limit: ff78ffff mem |
| [DEBUG] DOMAIN: 0000 mem: base: 0 size: 0 align: 0 gran: 0 limit: ffffffffff done |
| [INFO ] === Resource allocator: DOMAIN: 0000 - resource allocation complete === |
| [DEBUG] PCI: 00:01.1 20 <- [0x000000000000ffb0 - 0x000000000000ffbf] size 0x00000010 gran 0x04 io |
| [DEBUG] PCI: 00:02.0 10 <- [0x00000000fd000000 - 0x00000000fdffffff] size 0x01000000 gran 0x18 prefmem |
| [DEBUG] PCI: 00:02.0 18 <- [0x00000000ff78f000 - 0x00000000ff78ffff] size 0x00001000 gran 0x0c mem |
| [DEBUG] PCI: 00:02.0 30 <- [0x00000000ff790000 - 0x00000000ff79ffff] size 0x00010000 gran 0x10 romem |
| [DEBUG] PCI: 00:03.0 10 <- [0x00000000ff7a0000 - 0x00000000ff7bffff] size 0x00020000 gran 0x11 mem |
| [DEBUG] PCI: 00:03.0 14 <- [0x000000000000ffc0 - 0x000000000000ffff] size 0x00000040 gran 0x06 io |
| [DEBUG] PCI: 00:03.0 30 <- [0x00000000ff7c0000 - 0x00000000ff7fffff] size 0x00040000 gran 0x12 romem |
| [INFO ] Done setting resources. |
| [INFO ] Done allocating resources. |
| [DEBUG] BS: BS_DEV_RESOURCES run times (exec / console): 1 / 0 ms |
| [INFO ] Timestamp - device enable: 65487397 |
| [INFO ] Enabling resources... |
| [DEBUG] PCI: 00:00.0 cmd <- 00 |
| [DEBUG] PCI: 00:01.0 cmd <- 00 |
| [DEBUG] PCI: 00:01.1 cmd <- 01 |
| [DEBUG] PCI: 00:01.3 cmd <- 00 |
| [DEBUG] PCI: 00:02.0 cmd <- 03 |
| [DEBUG] PCI: 00:03.0 cmd <- 03 |
| [INFO ] done. |
| [DEBUG] BS: BS_DEV_INIT entry times (exec / console): 1 / 0 ms |
| [INFO ] Timestamp - device initialization: 81113570 |
| [INFO ] Initializing devices... |
| [DEBUG] CPU_CLUSTER: 0 init |
| [INFO ] CPU: QEMU Virtual CPU version 2.5+. |
| [INFO ] LAPIC 0x0 in XAPIC mode. |
| [DEBUG] CPU: APIC: 00 enabled |
| [DEBUG] CPU: APIC: 01 enabled |
| [DEBUG] Loading module at 0x00030000 with entry 0x00030000. filesize: 0x1b8 memsize: 0x1b8 |
| [DEBUG] Processing 17 relocs. Offset value of 0x00030000 |
| [DEBUG] Attempting to start 1 APs |
| [DEBUG] Waiting for 10ms after sending INIT. |
| [DEBUG] Waiting for SIPI to complete... |
| [DEBUG] done. |
| [INFO ] LAPIC 0x1 in XAPIC mode. |
| [DEBUG] Waiting for SIPI to complete... |
| [DEBUG] done. |
| [INFO ] AP: slot 1 apic_id 1 |
| [INFO ] Initializing CPU #0 |
| [DEBUG] CPU: vendor Intel device 60fb1 |
| [DEBUG] CPU: family 0f, model 6b, stepping 01 |
| [INFO ] CPU #0 initialized |
| [INFO ] Initializing CPU #1 |
| [DEBUG] CPU: vendor Intel device 60fb1 |
| [DEBUG] CPU: family 0f, model 6b, stepping 01 |
| [INFO ] CPU #1 initialized |
| [INFO ] bsp_do_flight_plan done after 0 msecs. |
| [DEBUG] CPU_CLUSTER: 0 init finished in 10 msecs |
| [DEBUG] PCI: 00:00.0 init |
| [DEBUG] Assigning IRQ 10 to PCI: 00:01.3 |
| [DEBUG] Assigning IRQ 11 to PCI: 00:03.0 |
| [DEBUG] PCI: 00:00.0 init finished in 1 msecs |
| [DEBUG] PCI: 00:01.0 init |
| [DEBUG] RTC Init |
| [DEBUG] IOAPIC: Initializing IOAPIC at 0xfec00000 |
| [DEBUG] IOAPIC: ID = 0x02 |
| [DEBUG] IOAPIC: 24 interrupts |
| [DEBUG] IOAPIC: Clearing IOAPIC at 0xfec00000 |
| [DEBUG] IOAPIC: Bootstrap Processor Local APIC = 0x00 |
| [DEBUG] PCI: 00:01.0 init finished in 0 msecs |
| [DEBUG] PCI: 00:01.1 init |
| [DEBUG] IDE: Primary IDE interface: on |
| [DEBUG] IDE: Secondary IDE interface: on |
| [DEBUG] IDE: Access to legacy IDE ports: off |
| [DEBUG] PCI: 00:01.1 init finished in 0 msecs |
| [DEBUG] PCI: 00:02.0 init |
| [DEBUG] PCI: 00:02.0 init finished in 9 msecs |
| [DEBUG] PCI: 00:03.0 init |
| [DEBUG] PCI: 00:03.0 init finished in 0 msecs |
| [INFO ] Devices initialized |
| [DEBUG] BS: BS_DEV_INIT run times (exec / console): 22 / 0 ms |
| [INFO ] Finalize devices... |
| [INFO ] Devices finalized |
| [INFO ] Timestamp - device setup done: 283718730 |
| [INFO ] Timestamp - cbmem post: 283734930 |
| [INFO ] Timestamp - write tables: 283741524 |
| [INFO ] Copying Interrupt Routing Table to 0x000f0000... done. |
| [INFO ] Copying Interrupt Routing Table to 0x3ff8f000... done. |
| [DEBUG] PIRQ table: 128 bytes. |
| [INFO ] QEMU: firmware config: Found 'etc/table-loader' |
| [DEBUG] QEMU: found ACPI tables in fw_cfg. |
| [INFO ] QEMU: firmware config: Found 'etc/acpi/rsdp' |
| [DEBUG] QEMU: loading "etc/acpi/rsdp" to 0x3ff6b000 (len 20) |
| [INFO ] QEMU: firmware config: Found 'etc/acpi/tables' |
| [DEBUG] QEMU: loading "etc/acpi/tables" to 0x3ff6b040 (len 131072) |
| [DEBUG] QEMU: loaded ACPI tables from fw_cfg. |
| [DEBUG] Looking on 0x3ff6b000 for valid checksum |
| [DEBUG] Checksum 1 passed |
| [DEBUG] Checksum 2 passed all OK |
| [DEBUG] ACPI: * SSDT |
| [DEBUG] Found 2 CPU(s). |
| [DEBUG] ACPI: added table 5/32, length now 56 |
| [DEBUG] ACPI tables: 131136 bytes. |
| [DEBUG] smbios_write_tables: 3ff63000 |
| [DEBUG] SMBIOS firmware version is set to coreboot_version: '4.19-66-g3b74bad537' |
| [DEBUG] SMBIOS: Unknown CPU or CPU doesn't support Deterministic Cache CPUID leaf |
| [INFO ] DOMAIN: 0000 (QEMU Northbridge i440fx) |
| [INFO ] QEMU: firmware config: Found 'etc/smbios/smbios-tables' |
| [DEBUG] QEMU: found smbios tables in fw_cfg (len 321). |
| [DEBUG] QEMU: coreboot type0 table found at 0x3ff63040. |
| [DEBUG] QEMU: loading smbios tables to 0x3ff63083 |
| [DEBUG] SMBIOS tables: 452 bytes. |
| [DEBUG] Writing table forward entry at 0x00000500 |
| [DEBUG] Wrote coreboot table at: 0x00000500, 0x10 bytes, checksum bfe5 |
| [DEBUG] Writing coreboot table at 0x3ff90000 |
| [DEBUG] 0. 0000000000000000-0000000000000fff: CONFIGURATION TABLES |
| [DEBUG] 1. 0000000000001000-0000000000007fff: RAM |
| [DEBUG] 2. 0000000000008000-000000000000dfff: RESERVED |
| [DEBUG] 3. 000000000000e000-000000000009ffff: RAM |
| [DEBUG] 4. 00000000000a0000-00000000000fffff: RESERVED |
| [DEBUG] 5. 0000000000100000-000000003ff62fff: RAM |
| [DEBUG] 6. 000000003ff63000-000000003ff98fff: CONFIGURATION TABLES |
| [DEBUG] 7. 000000003ff99000-000000003ffccfff: RAMSTAGE |
| [DEBUG] 8. 000000003ffcd000-000000003fffffff: CONFIGURATION TABLES |
| [DEBUG] 9. 00000000fec00000-00000000fec00fff: RESERVED |
| [DEBUG] 10. 00000000ff800000-00000000ffffffff: RESERVED |
| [DEBUG] FMAP: area COREBOOT found @ 200 (4193792 bytes) |
| [DEBUG] Wrote coreboot table at: 0x3ff90000, 0x2e4 bytes, checksum 2f45 |
| [DEBUG] coreboot table: 764 bytes. |
| [DEBUG] IMD ROOT 0. 0x3ffff000 0x00001000 |
| [DEBUG] IMD SMALL 1. 0x3fffe000 0x00001000 |
| [DEBUG] CONSOLE 2. 0x3ffde000 0x00020000 |
| [DEBUG] RO MCACHE 3. 0x3ffdd000 0x00000314 |
| [DEBUG] TIME STAMP 4. 0x3ffdc000 0x00000910 |
| [DEBUG] AFTER CAR 5. 0x3ffcd000 0x0000f000 |
| [DEBUG] RAMSTAGE 6. 0x3ff98000 0x00035000 |
| [DEBUG] COREBOOT 7. 0x3ff90000 0x00008000 |
| [DEBUG] IRQ TABLE 8. 0x3ff8f000 0x00001000 |
| [DEBUG] ACPI 9. 0x3ff6b000 0x00024000 |
| [DEBUG] SMBIOS 10. 0x3ff63000 0x00008000 |
| [DEBUG] IMD small region: |
| [DEBUG] IMD ROOT 0. 0x3fffec00 0x00000400 |
| [DEBUG] FMAP 1. 0x3fffeb40 0x000000b6 |
| [DEBUG] ROMSTG STCK 2. 0x3fffeaa0 0x00000088 |
| [INFO ] Timestamp - finalize chips: 295835444 |
| [DEBUG] BS: BS_WRITE_TABLES run times (exec / console): 1 / 0 ms |
| [INFO ] Timestamp - starting to load payload: 295860073 |
| [INFO ] CBFS: Found 'fallback/payload' @0x25900 size 0xfee4 in mcache @0x3ffdd27c |
| [DEBUG] Checking segment from ROM address 0xffc25b2c |
| [DEBUG] Checking segment from ROM address 0xffc25b48 |
| [DEBUG] Loading segment from ROM address 0xffc25b2c |
| [DEBUG] code (compression=1) |
| [DEBUG] New segment dstaddr 0x00100000 memsize 0x1354d0 srcaddr 0xffc25b64 filesize 0xfeac |
| [DEBUG] Loading Segment: addr: 0x00100000 memsz: 0x00000000001354d0 filesz: 0x000000000000feac |
| [DEBUG] using LZMA |
| [INFO ] Timestamp - starting LZMA decompress (ignore for x86): 295956763 |
| [INFO ] Timestamp - finished LZMA decompress (ignore for x86): 312099002 |
| [DEBUG] Clearing Segment: addr: 0x000000000011e628 memsz: 0x0000000000116ea8 |
| [DEBUG] Loading segment from ROM address 0xffc25b48 |
| [DEBUG] Entry Point 0x00100000 |
| [DEBUG] BS: BS_PAYLOAD_LOAD run times (exec / console): 2 / 0 ms |
| [DEBUG] Jumping to boot code at 0x00100000(0x3ff90000) |
| [INFO ] Timestamp - selfboot jump: 314063092 |
| coreboot: 4.19-66-g3b74bad537 |
| FILO version 0.6.0 (pmenzel@ersatz) Fri Jan 20 22:16:48 UTC 2023 |
| Press <Enter> for default boot, or <Esc> for boot prompt... 2? ?1? ?timed out |
| boot: hda1:/vmlinuz initrd=hda1:/initrd.img root=/dev/sda1 ro console=ttyS0,115200n8 |
| ATA-0: [io ports 0x1f0-0x1f7,0x3f6] |
| * hda [ATA Disk]: QEMU HARDDISK |
| Found Linux version 5.6.0-1-686-pae (debian-kernel@lists.debian.org) #1 SMP Debian 5.6.7-1 (2020-04-29) relocatable bzImage. |
| Loading kernel... ok |
| Loading initrd... ok |
| Jumping to entry point... |