| |
| |
| [NOTE ] coreboot-4.16 Sat Feb 26 01:24:17 UTC 2022 bootblock starting (log level: 7)... |
| [INFO ] Timestamp - end of bootblock: 10692052 |
| [INFO ] Timestamp - starting to load romstage: 12840790 |
| [DEBUG] FMAP: Found "FLASH" version 1.1 at 0x0. |
| [DEBUG] FMAP: base = 0xffc00000 size = 0x400000 #areas = 3 |
| [DEBUG] FMAP: area COREBOOT found @ 200 (4193792 bytes) |
| [INFO ] CBFS: mcache @0x00014e00 built for 13 files, used 0x2c4 of 0x4000 bytes |
| [INFO ] CBFS: Found 'fallback/romstage' @0x80 size 0x55c8 in mcache @0x00014e2c |
| [INFO ] Timestamp - finished loading romstage: 32754451 |
| [DEBUG] BS: bootblock times (exec / console): total (unknown) / 17 ms |
| |
| |
| [NOTE ] coreboot-4.16 Sat Feb 26 01:24:17 UTC 2022 romstage starting (log level: 7)... |
| [INFO ] QEMU: firmware config interface detected |
| [INFO ] Firmware config version id: 3 |
| [INFO ] QEMU: firmware config: Found 'etc/e820' |
| [DEBUG] CBMEM: |
| [DEBUG] IMD: root @ 0x3ffff000 254 entries. |
| [DEBUG] IMD: root @ 0x3fffec00 62 entries. |
| [DEBUG] FMAP: area COREBOOT found @ 200 (4193792 bytes) |
| [DEBUG] MTRR Range: Start=ffc00000 End=0 (Size 400000) |
| [INFO ] CBFS: Found 'fallback/postcar' @0x15380 size 0x5ab8 in mcache @0x00014fbc |
| [DEBUG] Loading module at 0x3ffd2000 with entry 0x3ffd2031. filesize: 0x55a8 memsize: 0x98b0 |
| [DEBUG] Processing 308 relocs. Offset value of 0x3dfd2000 |
| [INFO ] Timestamp - end of romstage: 88188534 |
| [DEBUG] BS: romstage times (exec / console): total (unknown) / 11 ms |
| |
| |
| [NOTE ] coreboot-4.16 Sat Feb 26 01:24:17 UTC 2022 postcar starting (log level: 7)... |
| [INFO ] Timestamp - start of postcar: 101250093 |
| [INFO ] Timestamp - end of postcar: 103154176 |
| [INFO ] Timestamp - starting to load ramstage: 111111849 |
| [DEBUG] FMAP: area COREBOOT found @ 200 (4193792 bytes) |
| [INFO ] CBFS: Found 'fallback/ramstage' @0x5700 size 0xe3ae in mcache @0x3fffe9cc |
| [INFO ] Timestamp - starting LZMA decompress (ignore for x86): 118906206 |
| [INFO ] Timestamp - finished LZMA decompress (ignore for x86): 136271674 |
| [DEBUG] Loading module at 0x3ffa3000 with entry 0x3ffa3000. filesize: 0x1bf18 memsize: 0x2d6c8 |
| [DEBUG] Processing 1877 relocs. Offset value of 0x3f1a3000 |
| [INFO ] Timestamp - finished loading ramstage: 145769189 |
| [DEBUG] BS: postcar times (exec / console): total (unknown) / 14 ms |
| |
| |
| [NOTE ] coreboot-4.16 Sat Feb 26 01:24:17 UTC 2022 ramstage starting (log level: 7)... |
| [INFO ] Timestamp - start of ramstage: 160249641 |
| [INFO ] Timestamp - device enumeration: 162196013 |
| [DEBUG] BS: BS_DEV_INIT_CHIPS run times (exec / console): 0 / 1 ms |
| [INFO ] Enumerating buses... |
| [DEBUG] Root Device scanning... |
| [DEBUG] CPU_CLUSTER: 0 enabled |
| [DEBUG] DOMAIN: 0000 enabled |
| [DEBUG] CPU_CLUSTER: 0 scanning... |
| [INFO ] QEMU: firmware config interface detected |
| [INFO ] Firmware config version id: 3 |
| [INFO ] QEMU: max_cpus is 2 |
| [DEBUG] CPU: APIC: 00 enabled |
| [DEBUG] CPU: APIC: 01 enabled |
| [DEBUG] scan_bus: bus CPU_CLUSTER: 0 finished in 2 msecs |
| [DEBUG] DOMAIN: 0000 scanning... |
| [DEBUG] PCI: pci_scan_bus for bus 00 |
| [DEBUG] PCI: 00:00.0 [8086/1237] enabled |
| [DEBUG] PCI: 00:01.0 [8086/7000] enabled |
| [DEBUG] PCI: 00:01.1 [8086/7010] enabled |
| [DEBUG] PCI: 00:01.3 [8086/7113] enabled |
| [DEBUG] PCI: 00:02.0 [1234/1111] enabled |
| [DEBUG] PCI: 00:03.0 [8086/100e] enabled |
| [DEBUG] PCI: 00:01.0 scanning... |
| [DEBUG] scan_bus: bus PCI: 00:01.0 finished in 0 msecs |
| [DEBUG] PCI: 00:01.3 scanning... |
| [DEBUG] scan_bus: bus PCI: 00:01.3 finished in 0 msecs |
| [DEBUG] scan_bus: bus DOMAIN: 0000 finished in 8 msecs |
| [DEBUG] scan_bus: bus Root Device finished in 14 msecs |
| [INFO ] done |
| [DEBUG] BS: BS_DEV_ENUMERATE run times (exec / console): 1 / 16 ms |
| [INFO ] Timestamp - device configuration: 213952362 |
| [DEBUG] found VGA at PCI: 00:02.0 |
| [DEBUG] Setting up VGA for PCI: 00:02.0 |
| [DEBUG] Setting PCI_BRIDGE_CTL_VGA for bridge DOMAIN: 0000 |
| [DEBUG] Setting PCI_BRIDGE_CTL_VGA for bridge Root Device |
| [INFO ] Allocating resources... |
| [INFO ] Reading resources... |
| [INFO ] QEMU: firmware config: Found 'etc/e820' |
| [DEBUG] QEMU: e820/res: 0xfeffc000 +0x00004000 |
| [DEBUG] QEMU: e820/ram: 0x00000000 + 0x40000000 |
| [DEBUG] QEMU: reserve ioports 0x0510-0x0511 [firmware-config] |
| [DEBUG] QEMU: reserve ioports 0x5658-0x5658 [vmware-port] |
| [DEBUG] QEMU: reserve ioports 0xae00-0xae0f [pci-hotplug] |
| [DEBUG] QEMU: reserve ioports 0xaf00-0xaf1f [cpu-hotplug] |
| [DEBUG] QEMU: reserve ioports 0xafe0-0xafe3 [piix4-gpe0] |
| [INFO ] Done reading resources. |
| [INFO ] === Resource allocator: DOMAIN: 0000 - Pass 1 (gathering requirements) === |
| [INFO ] === Resource allocator: DOMAIN: 0000 - Pass 2 (allocating resources) === |
| [DEBUG] DOMAIN: 0000 io: base: 0 size: 0 align: 0 gran: 0 limit: ffff |
| [DEBUG] update_constraints: DOMAIN: 0000 0d base 00000510 limit 00000511 io (fixed) |
| [DEBUG] update_constraints: DOMAIN: 0000 0e base 00005658 limit 00005658 io (fixed) |
| [DEBUG] update_constraints: DOMAIN: 0000 0f base 0000ae00 limit 0000ae0f io (fixed) |
| [DEBUG] update_constraints: DOMAIN: 0000 10 base 0000af00 limit 0000af1f io (fixed) |
| [DEBUG] update_constraints: DOMAIN: 0000 11 base 0000afe0 limit 0000afe3 io (fixed) |
| [DEBUG] update_constraints: PCI: 00:01.0 01 base 00000000 limit 00000fff io (fixed) |
| [DEBUG] update_constraints: PCI: 00:01.3 01 base 0000e400 limit 0000e43f io (fixed) |
| [DEBUG] update_constraints: PCI: 00:01.3 02 base 00000f00 limit 00000f0f io (fixed) |
| [INFO ] DOMAIN: 0000: Resource ranges: |
| [INFO ] * Base: 1000, Size: 4658, Tag: 100 |
| [INFO ] * Base: 5659, Size: 57a7, Tag: 100 |
| [INFO ] * Base: ae10, Size: f0, Tag: 100 |
| [INFO ] * Base: af20, Size: c0, Tag: 100 |
| [INFO ] * Base: afe4, Size: 341c, Tag: 100 |
| [INFO ] * Base: e440, Size: 1bc0, Tag: 100 |
| [DEBUG] PCI: 00:03.0 14 * [0x1000 - 0x103f] limit: 103f io |
| [DEBUG] PCI: 00:01.1 20 * [0x1040 - 0x104f] limit: 104f io |
| [DEBUG] DOMAIN: 0000 io: base: 0 size: 0 align: 0 gran: 0 limit: ffff done |
| [DEBUG] DOMAIN: 0000 mem: base: 0 size: 0 align: 0 gran: 0 limit: ffffffffff |
| [DEBUG] update_constraints: DOMAIN: 0000 0a base feffc000 limit feffffff mem (fixed) |
| [DEBUG] update_constraints: DOMAIN: 0000 0b base 00000000 limit 0009ffff mem (fixed) |
| [DEBUG] update_constraints: DOMAIN: 0000 0c base 000c0000 limit 3fffffff mem (fixed) |
| [DEBUG] update_constraints: DOMAIN: 0000 12 base 000a0000 limit 000bffff mem (fixed) |
| [DEBUG] update_constraints: DOMAIN: 0000 13 base 000c0000 limit 000fffff mem (fixed) |
| [DEBUG] update_constraints: DOMAIN: 0000 02 base fec00000 limit fecfffff mem (fixed) |
| [DEBUG] update_constraints: DOMAIN: 0000 03 base fee00000 limit fee0ffff mem (fixed) |
| [DEBUG] update_constraints: PCI: 00:01.0 02 base ff800000 limit ffffffff mem (fixed) |
| [DEBUG] update_constraints: PCI: 00:01.0 03 base fec00000 limit fec00fff mem (fixed) |
| [INFO ] DOMAIN: 0000: Resource ranges: |
| [INFO ] * Base: 40000000, Size: bec00000, Tag: 200 |
| [INFO ] * Base: fed00000, Size: 100000, Tag: 200 |
| [INFO ] * Base: fee10000, Size: 1ec000, Tag: 200 |
| [INFO ] * Base: ff000000, Size: 800000, Tag: 200 |
| [INFO ] * Base: 100000000, Size: ff00000000, Tag: 100200 |
| [DEBUG] PCI: 00:02.0 10 * [0x40000000 - 0x40ffffff] limit: 40ffffff prefmem |
| [DEBUG] PCI: 00:03.0 30 * [0x41000000 - 0x4103ffff] limit: 4103ffff mem |
| [DEBUG] PCI: 00:03.0 10 * [0x41040000 - 0x4105ffff] limit: 4105ffff mem |
| [DEBUG] PCI: 00:02.0 30 * [0x41060000 - 0x4106ffff] limit: 4106ffff mem |
| [DEBUG] PCI: 00:02.0 18 * [0x41070000 - 0x41070fff] limit: 41070fff mem |
| [DEBUG] DOMAIN: 0000 mem: base: 0 size: 0 align: 0 gran: 0 limit: ffffffffff done |
| [INFO ] === Resource allocator: DOMAIN: 0000 - resource allocation complete === |
| [DEBUG] PCI: 00:01.1 20 <- [0x0000001040 - 0x000000104f] size 0x00000010 gran 0x04 io |
| [DEBUG] PCI: 00:02.0 10 <- [0x0040000000 - 0x0040ffffff] size 0x01000000 gran 0x18 prefmem |
| [DEBUG] PCI: 00:02.0 18 <- [0x0041070000 - 0x0041070fff] size 0x00001000 gran 0x0c mem |
| [DEBUG] PCI: 00:02.0 30 <- [0x0041060000 - 0x004106ffff] size 0x00010000 gran 0x10 romem |
| [DEBUG] PCI: 00:03.0 10 <- [0x0041040000 - 0x004105ffff] size 0x00020000 gran 0x11 mem |
| [DEBUG] PCI: 00:03.0 14 <- [0x0000001000 - 0x000000103f] size 0x00000040 gran 0x06 io |
| [DEBUG] PCI: 00:03.0 30 <- [0x0041000000 - 0x004103ffff] size 0x00040000 gran 0x12 romem |
| [INFO ] Done setting resources. |
| [INFO ] Done allocating resources. |
| [DEBUG] BS: BS_DEV_RESOURCES run times (exec / console): 3 / 75 ms |
| [INFO ] Timestamp - device enable: 420210763 |
| [INFO ] Enabling resources... |
| [DEBUG] PCI: 00:00.0 cmd <- 00 |
| [DEBUG] PCI: 00:01.0 cmd <- 00 |
| [DEBUG] PCI: 00:01.1 cmd <- 01 |
| [DEBUG] PCI: 00:01.3 cmd <- 00 |
| [DEBUG] PCI: 00:02.0 cmd <- 03 |
| [DEBUG] PCI: 00:03.0 cmd <- 03 |
| [INFO ] done. |
| [DEBUG] BS: BS_DEV_ENABLE run times (exec / console): 1 / 6 ms |
| [INFO ] Timestamp - device initialization: 442822229 |
| [INFO ] Initializing devices... |
| [DEBUG] CPU_CLUSTER: 0 init |
| [INFO ] CPU: QEMU Virtual CPU version 2.5+. |
| [INFO ] LAPIC 0x0 in XAPIC mode. |
| [DEBUG] Loading module at 0x00030000 with entry 0x00030000. filesize: 0x178 memsize: 0x178 |
| [DEBUG] Processing 18 relocs. Offset value of 0x00030000 |
| [DEBUG] Attempting to start 1 APs |
| [DEBUG] Waiting for 10ms after sending INIT. |
| [DEBUG] Waiting for SIPI to complete... |
| [INFO ] LAPIC 0x1 in XAPIC mode. |
| [DEBUG] done. |
| [INFO ] AP: slot 1 apic_id 1 |
| [DEBUG] Waiting for SIPI to complete... |
| [DEBUG] done. |
| [INFO ] Initializing CPU #0 |
| [DEBUG] CPU: vendor Intel device 60fb1 |
| [DEBUG] CPU: family 0f, model 6b, stepping 01 |
| [INFO ] CPU #0 initialized |
| [INFO ] Initializing CPU #1 |
| [DEBUG] CPU: vendor Intel device 60fb1 |
| [DEBUG] CPU: family 0f, model 6b, stepping 01 |
| [INFO ] CPU #1 initialized |
| [INFO ] bsp_do_flight_plan done after 5 msecs. |
| [DEBUG] CPU_CLUSTER: 0 init finished in 25 msecs |
| [DEBUG] PCI: 00:00.0 init |
| [DEBUG] Assigning IRQ 10 to PCI: 00:01.3 |
| [DEBUG] Assigning IRQ 11 to PCI: 00:03.0 |
| [DEBUG] PCI: 00:00.0 init finished in 4 msecs |
| [DEBUG] PCI: 00:01.0 init |
| [DEBUG] RTC Init |
| [DEBUG] IOAPIC: Initializing IOAPIC at 0xfec00000 |
| [DEBUG] IOAPIC: ID = 0x02 |
| [DEBUG] IOAPIC: 24 interrupts |
| [DEBUG] IOAPIC: Clearing IOAPIC at 0xfec00000 |
| [DEBUG] IOAPIC: Bootstrap Processor Local APIC = 0x00 |
| [DEBUG] PCI: 00:01.0 init finished in 5 msecs |
| [DEBUG] PCI: 00:01.1 init |
| [DEBUG] IDE: Primary IDE interface: on |
| [DEBUG] IDE: Secondary IDE interface: on |
| [DEBUG] IDE: Access to legacy IDE ports: off |
| [DEBUG] PCI: 00:01.1 init finished in 3 msecs |
| [DEBUG] PCI: 00:02.0 init |
| [DEBUG] PCI: 00:02.0 init finished in 28 msecs |
| [DEBUG] PCI: 00:03.0 init |
| [DEBUG] PCI: 00:03.0 init finished in 0 msecs |
| [INFO ] Devices initialized |
| [DEBUG] BS: BS_DEV_INIT run times (exec / console): 48 / 33 ms |
| [INFO ] Finalize devices... |
| [INFO ] Devices finalized |
| [INFO ] Timestamp - device setup done: 661814250 |
| [DEBUG] BS: BS_POST_DEVICE run times (exec / console): 0 / 3 ms |
| [INFO ] Timestamp - cbmem post: 677242968 |
| [DEBUG] BS: BS_OS_RESUME_CHECK run times (exec / console): 0 / 1 ms |
| [INFO ] Timestamp - write tables: 683198998 |
| [INFO ] Copying Interrupt Routing Table to 0x000f0000... done. |
| [INFO ] Copying Interrupt Routing Table to 0x3ff99000... done. |
| [DEBUG] PIRQ table: 128 bytes. |
| [INFO ] QEMU: firmware config: Found 'etc/table-loader' |
| [DEBUG] QEMU: found ACPI tables in fw_cfg. |
| [INFO ] QEMU: firmware config: Found 'etc/acpi/rsdp' |
| [DEBUG] QEMU: loading "etc/acpi/rsdp" to 0x3ff75000 (len 20) |
| [INFO ] QEMU: firmware config: Found 'etc/acpi/tables' |
| [DEBUG] QEMU: loading "etc/acpi/tables" to 0x3ff75040 (len 131072) |
| [DEBUG] QEMU: loaded ACPI tables from fw_cfg. |
| [DEBUG] Looking on 0x3ff75000 for valid checksum |
| [DEBUG] Checksum 1 passed |
| [DEBUG] Checksum 2 passed all OK |
| [DEBUG] ACPI: * SSDT |
| [DEBUG] Found 2 CPU(s). |
| [DEBUG] ACPI: added table 5/32, length now 56 |
| [DEBUG] ACPI tables: 131136 bytes. |
| [DEBUG] smbios_write_tables: 3ff74000 |
| [DEBUG] SMBIOS firmware version is set to coreboot_version: '4.16' |
| [DEBUG] SMBIOS: Unknown CPU or CPU doesn't support Deterministic Cache CPUID leaf |
| [INFO ] DOMAIN: 0000 (QEMU Northbridge i440fx) |
| [INFO ] QEMU: firmware config: Found 'etc/smbios/smbios-tables' |
| [DEBUG] QEMU: found smbios tables in fw_cfg (len 321). |
| [DEBUG] QEMU: coreboot type0 table found at 0x3ff74040. |
| [DEBUG] QEMU: loading smbios tables to 0x3ff74074 |
| [DEBUG] SMBIOS tables: 437 bytes. |
| [DEBUG] Writing table forward entry at 0x00000500 |
| [DEBUG] Wrote coreboot table at: 0x00000500, 0x10 bytes, checksum 1fe5 |
| [DEBUG] Writing coreboot table at 0x3ff9a000 |
| [DEBUG] 0. 0000000000000000-0000000000000fff: CONFIGURATION TABLES |
| [DEBUG] 1. 0000000000001000-000000000009ffff: RAM |
| [DEBUG] 2. 00000000000a0000-00000000000fffff: RESERVED |
| [DEBUG] 3. 0000000000100000-000000003ff73fff: RAM |
| [DEBUG] 4. 000000003ff74000-000000003ffa2fff: CONFIGURATION TABLES |
| [DEBUG] 5. 000000003ffa3000-000000003ffd0fff: RAMSTAGE |
| [DEBUG] 6. 000000003ffd1000-000000003fffffff: CONFIGURATION TABLES |
| [DEBUG] 7. 00000000fec00000-00000000fec00fff: RESERVED |
| [DEBUG] 8. 00000000ff800000-00000000ffffffff: RESERVED |
| [DEBUG] FMAP: area COREBOOT found @ 200 (4193792 bytes) |
| [DEBUG] Wrote coreboot table at: 0x3ff9a000, 0x2d8 bytes, checksum ee51 |
| [DEBUG] coreboot table: 752 bytes. |
| [DEBUG] IMD ROOT 0. 0x3ffff000 0x00001000 |
| [DEBUG] IMD SMALL 1. 0x3fffe000 0x00001000 |
| [DEBUG] CONSOLE 2. 0x3ffde000 0x00020000 |
| [DEBUG] TIME STAMP 3. 0x3ffdd000 0x00000910 |
| [DEBUG] ROMSTG STCK 4. 0x3ffdc000 0x00001000 |
| [DEBUG] AFTER CAR 5. 0x3ffd1000 0x0000b000 |
| [DEBUG] RAMSTAGE 6. 0x3ffa2000 0x0002f000 |
| [DEBUG] COREBOOT 7. 0x3ff9a000 0x00008000 |
| [DEBUG] IRQ TABLE 8. 0x3ff99000 0x00001000 |
| [DEBUG] ACPI 9. 0x3ff75000 0x00024000 |
| [DEBUG] SMBIOS 10. 0x3ff74000 0x00001000 |
| [DEBUG] IMD small region: |
| [DEBUG] IMD ROOT 0. 0x3fffec00 0x00000400 |
| [DEBUG] RO MCACHE 1. 0x3fffe920 0x000002c4 |
| [DEBUG] FMAP 2. 0x3fffe860 0x000000b6 |
| [INFO ] Timestamp - finalize chips: 819931881 |
| [DEBUG] BS: BS_WRITE_TABLES run times (exec / console): 2 / 51 ms |
| [INFO ] Timestamp - starting to load payload: 824431069 |
| [INFO ] CBFS: Found 'fallback/payload' @0x1ae80 size 0x11c0d in mcache @0x3fffeb20 |
| [DEBUG] Checking segment from ROM address 0xffc1b0ac |
| [DEBUG] Payload being loaded at below 1MiB without region being marked as RAM usable. |
| [DEBUG] Checking segment from ROM address 0xffc1b0c8 |
| [DEBUG] Loading segment from ROM address 0xffc1b0ac |
| [DEBUG] code (compression=1) |
| [DEBUG] New segment dstaddr 0x000de7e0 memsize 0x21820 srcaddr 0xffc1b0e4 filesize 0x11bd5 |
| [DEBUG] Loading Segment: addr: 0x000de7e0 memsz: 0x0000000000021820 filesz: 0x0000000000011bd5 |
| [DEBUG] using LZMA |
| [INFO ] Timestamp - starting LZMA decompress (ignore for x86): 853129382 |
| [INFO ] Timestamp - finished LZMA decompress (ignore for x86): 872969780 |
| [DEBUG] Loading segment from ROM address 0xffc1b0c8 |
| [DEBUG] Entry Point 0x000fd2ac |
| [DEBUG] BS: BS_PAYLOAD_LOAD run times (exec / console): 7 / 14 ms |
| [DEBUG] Jumping to boot code at 0x000fd2ac(0x3ff9a000) |
| [INFO ] Timestamp - selfboot jump: 886449389 |
| SeaBIOS (version rel-1.15.0-39-g829b0f1) |
| BUILD: gcc: (Debian 11.2.0-18) 11.2.0 binutils: (GNU Binutils for Debian) 2.38 |
| Found coreboot cbmem console @ 3ffde000 |
| Found mainboard Emulation QEMU x86 i440fx/piix4 |
| Relocating init from 0x000dff20 to 0x3ff26aa0 (size 54464) |
| Found CBFS header at 0xffc0022c |
| multiboot: eax=3ffbe918, ebx=3ffbe8e4 |
| Found 6 PCI devices (max PCI bus is 00) |
| Copying SMBIOS from 0x3ff74000 to 0x000f62a0 |
| Copying SMBIOS 3.0 from 0x3ff74020 to 0x000f6280 |
| Copying ACPI RSDP from 0x3ff75000 to 0x000f6260 |
| Copying PIR from 0x3ff99000 to 0x000f61e0 |
| table(50434146)=0x3ff7684c (via rsdt) |
| Using pmtimer, ioport 0xe408 |
| Scan for VGA option rom |
| Running option rom at c000:0003 |
| pmm call arg1=0 |
| Turning on vga text mode console |
| SeaBIOS (version rel-1.15.0-39-g829b0f1) |
| ATA controller 1 at 1f0/3f4/0 (irq 14 dev 9) |
| ATA controller 2 at 170/374/0 (irq 15 dev 9) |
| Searching bootorder for: HALT |
| Found 1 lpt ports |
| Found 1 serial ports |
| ata0-0: QEMU HARDDISK ATA-7 Hard-Disk (2048 MiBytes) |
| Searching bootorder for: /pci@i0cf8/*@1,1/drive@0/disk@0 |
| Searching bios-geometry for: /pci@i0cf8/*@1,1/drive@0/disk@0 |
| PS2 keyboard initialized |
| DVD/CD [ata1-0: QEMU DVD-ROM ATAPI-4 DVD/CD] |
| Searching bootorder for: /pci@i0cf8/*@1,1/drive@1/disk@0 |
| Searching bios-geometry for: /pci@i0cf8/*@1,1/drive@1/disk@0 |
| All threads complete. |
| Scan for option roms |
| Running option rom at ca00:0003 |
| pmm call arg1=1 |
| pmm call arg1=0 |
| pmm call arg1=1 |
| pmm call arg1=0 |
| Searching bootorder for: /pci@i0cf8/*@3 |
| |
| Press ESC for boot menu. |
| |
| Searching bootorder for: HALT |
| drive 0x000f6160: PCHS=4161/16/63 translation=large LCHS=520/128/63 s=4194304 |
| Space available for UMB: cb000-ec000, f5ac0-f60f0 |
| Returned 262144 bytes of ZoneHigh |
| e820 map has 7 items: |
| 0: 0000000000000000 - 000000000009fc00 = 1 RAM |
| 1: 000000000009fc00 - 00000000000a0000 = 2 RESERVED |
| 2: 00000000000f0000 - 0000000000100000 = 2 RESERVED |
| 3: 0000000000100000 - 000000003ff74000 = 1 RAM |
| 4: 000000003ff74000 - 0000000040000000 = 2 RESERVED |
| 5: 00000000fec00000 - 00000000fec01000 = 2 RESERVED |
| 6: 00000000ff800000 - 0000000100000000 = 2 RESERVED |
| enter handle_19: |
| NULL |
| Booting from DVD/CD... |
| Device reports MEDIUM NOT PRESENT - 2 tries left |
| Device reports MEDIUM NOT PRESENT - 1 tries left |
| Device reports MEDIUM NOT PRESENT - 0 tries left |
| Boot failed: Could not read from CDROM (code 0003) |
| enter handle_18: |
| NULL |
| Booting from Hard Disk... |
| Booting from 0000:7c00 |