| [ 0.000000] Linux version 4.16.13-2-ARCH (builduser@bpiotrowski) (gcc version 8.1.1 20180531 (GCC)) #1 SMP PREEMPT Fri Jun 1 18:46:11 UTC 2018 |
| [ 0.000000] Command line: BOOT_IMAGE=/vmlinuz-linux root=UUID=a7ef3ac7-5cc1-4350-aa09-e542549bb49b rw modprobe.blacklist=mei_me quiet iomem=relaxed console=tty0 console=ttyS0,115200n8 |
| [ 0.000000] KERNEL supported cpus: |
| [ 0.000000] Intel GenuineIntel |
| [ 0.000000] AMD AuthenticAMD |
| [ 0.000000] Centaur CentaurHauls |
| [ 0.000000] x86/fpu: Supporting XSAVE feature 0x001: 'x87 floating point registers' |
| [ 0.000000] x86/fpu: Supporting XSAVE feature 0x002: 'SSE registers' |
| [ 0.000000] x86/fpu: Supporting XSAVE feature 0x004: 'AVX registers' |
| [ 0.000000] x86/fpu: xstate_offset[2]: 576, xstate_sizes[2]: 256 |
| [ 0.000000] x86/fpu: Enabled xstate features 0x7, context size is 832 bytes, using 'standard' format. |
| [ 0.000000] e820: BIOS-provided physical RAM map: |
| [ 0.000000] BIOS-e820: [mem 0x0000000000000000-0x0000000000000fff] type 16 |
| [ 0.000000] BIOS-e820: [mem 0x0000000000001000-0x000000000009ffff] usable |
| [ 0.000000] BIOS-e820: [mem 0x00000000000a0000-0x00000000000fffff] reserved |
| [ 0.000000] BIOS-e820: [mem 0x0000000000100000-0x000000007ff38fff] usable |
| [ 0.000000] BIOS-e820: [mem 0x000000007ff39000-0x000000007fffffff] type 16 |
| [ 0.000000] BIOS-e820: [mem 0x0000000080000000-0x00000000829fffff] reserved |
| [ 0.000000] BIOS-e820: [mem 0x00000000f0000000-0x00000000f3ffffff] reserved |
| [ 0.000000] BIOS-e820: [mem 0x00000000fed90000-0x00000000fed91fff] reserved |
| [ 0.000000] BIOS-e820: [mem 0x0000000100000000-0x000000027c5fffff] usable |
| [ 0.000000] NX (Execute Disable) protection: active |
| [ 0.000000] SMBIOS 2.7 present. |
| [ 0.000000] DMI: ASUS P8H61-M PRO/P8H61-M PRO, BIOS 4.8-599-g1bf411c743 06/24/2018 |
| [ 0.000000] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved |
| [ 0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable |
| [ 0.000000] e820: last_pfn = 0x27c600 max_arch_pfn = 0x400000000 |
| [ 0.000000] MTRR default type: uncachable |
| [ 0.000000] MTRR fixed ranges enabled: |
| [ 0.000000] 00000-9FFFF write-back |
| [ 0.000000] A0000-BFFFF uncachable |
| [ 0.000000] C0000-FFFFF write-back |
| [ 0.000000] MTRR variable ranges enabled: |
| [ 0.000000] 0 base 000000000 mask F80000000 write-back |
| [ 0.000000] 1 base 0D0000000 mask FF0000000 write-combining |
| [ 0.000000] 2 base 100000000 mask F00000000 write-back |
| [ 0.000000] 3 base 200000000 mask F80000000 write-back |
| [ 0.000000] 4 disabled |
| [ 0.000000] 5 disabled |
| [ 0.000000] 6 disabled |
| [ 0.000000] 7 disabled |
| [ 0.000000] 8 disabled |
| [ 0.000000] 9 disabled |
| [ 0.000000] x86/PAT: Configuration [0-7]: WB WC UC- UC WB WP UC- WT |
| [ 0.000000] e820: last_pfn = 0x7ff39 max_arch_pfn = 0x400000000 |
| [ 0.000000] Scanning 1 areas for low memory corruption |
| [ 0.000000] Base memory trampoline at [ (ptrval)] 99000 size 24576 |
| [ 0.000000] BRK [0x162655000, 0x162655fff] PGTABLE |
| [ 0.000000] BRK [0x162656000, 0x162656fff] PGTABLE |
| [ 0.000000] BRK [0x162657000, 0x162657fff] PGTABLE |
| [ 0.000000] BRK [0x162658000, 0x162658fff] PGTABLE |
| [ 0.000000] BRK [0x162659000, 0x162659fff] PGTABLE |
| [ 0.000000] BRK [0x16265a000, 0x16265afff] PGTABLE |
| [ 0.000000] BRK [0x16265b000, 0x16265bfff] PGTABLE |
| [ 0.000000] RAMDISK: [mem 0x36e03000-0x376f8fff] |
| [ 0.000000] ACPI: Early table checksum verification disabled |
| [ 0.000000] ACPI: RSDP 0x00000000000F0000 000024 (v02 CORE ) |
| [ 0.000000] ACPI: XSDT 0x000000007FF4B0E0 00005C (v01 CORE COREBOOT 00000000 CORE 00000000) |
| [ 0.000000] ACPI: FACP 0x000000007FF4D9E0 0000F4 (v04 CORE COREBOOT 00000000 CORE 00000000) |
| [ 0.000000] ACPI: DSDT 0x000000007FF4B280 002751 (v03 COREv4 COREBOOT 20141018 INTL 20180531) |
| [ 0.000000] ACPI: FACS 0x000000007FF4B240 000040 |
| [ 0.000000] ACPI: FACS 0x000000007FF4B240 000040 |
| [ 0.000000] ACPI: SSDT 0x000000007FF4DAE0 0017A6 (v02 CORE COREBOOT 0000002A CORE 0000002A) |
| [ 0.000000] ACPI: MCFG 0x000000007FF4F290 00003C (v01 CORE COREBOOT 00000000 CORE 00000000) |
| [ 0.000000] ACPI: TCPA 0x000000007FF4F2D0 000032 (v02 CORE COREBOOT 00000000 CORE 00000000) |
| [ 0.000000] ACPI: APIC 0x000000007FF4F310 00006C (v01 CORE COREBOOT 00000000 CORE 00000000) |
| [ 0.000000] ACPI: DMAR 0x000000007FF4F380 0000A8 (v01 CORE COREBOOT 00000000 CORE 00000000) |
| [ 0.000000] ACPI: HPET 0x000000007FF4F430 000038 (v01 CORE COREBOOT 00000000 CORE 00000000) |
| [ 0.000000] ACPI: Local APIC address 0xfee00000 |
| [ 0.000000] No NUMA configuration found |
| [ 0.000000] Faking a node at [mem 0x0000000000000000-0x000000027c5fffff] |
| [ 0.000000] NODE_DATA(0) allocated [mem 0x27c5f7000-0x27c5fafff] |
| [ 0.000000] tsc: Fast TSC calibration using PIT |
| [ 0.000000] Zone ranges: |
| [ 0.000000] DMA [mem 0x0000000000001000-0x0000000000ffffff] |
| [ 0.000000] DMA32 [mem 0x0000000001000000-0x00000000ffffffff] |
| [ 0.000000] Normal [mem 0x0000000100000000-0x000000027c5fffff] |
| [ 0.000000] Device empty |
| [ 0.000000] Movable zone start for each node |
| [ 0.000000] Early memory node ranges |
| [ 0.000000] node 0: [mem 0x0000000000001000-0x000000000009ffff] |
| [ 0.000000] node 0: [mem 0x0000000000100000-0x000000007ff38fff] |
| [ 0.000000] node 0: [mem 0x0000000100000000-0x000000027c5fffff] |
| [ 0.000000] Initmem setup node 0 [mem 0x0000000000001000-0x000000027c5fffff] |
| [ 0.000000] On node 0 totalpages: 2082008 |
| [ 0.000000] DMA zone: 64 pages used for memmap |
| [ 0.000000] DMA zone: 22 pages reserved |
| [ 0.000000] DMA zone: 3999 pages, LIFO batch:0 |
| [ 0.000000] DMA32 zone: 8125 pages used for memmap |
| [ 0.000000] DMA32 zone: 519993 pages, LIFO batch:31 |
| [ 0.000000] Normal zone: 24344 pages used for memmap |
| [ 0.000000] Normal zone: 1558016 pages, LIFO batch:31 |
| [ 0.000000] Reserved but unavailable: 97 pages |
| [ 0.000000] Reserving Intel graphics memory at [mem 0x80a00000-0x829fffff] |
| [ 0.000000] ACPI: PM-Timer IO Port: 0x508 |
| [ 0.000000] ACPI: Local APIC address 0xfee00000 |
| [ 0.000000] IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-23 |
| [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) |
| [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level) |
| [ 0.000000] ACPI: IRQ0 used by override. |
| [ 0.000000] ACPI: IRQ9 used by override. |
| [ 0.000000] Using ACPI (MADT) for SMP configuration information |
| [ 0.000000] ACPI: HPET id: 0x8086a701 base: 0xfed00000 |
| [ 0.000000] smpboot: Allowing 4 CPUs, 0 hotplug CPUs |
| [ 0.000000] PM: Registered nosave memory: [mem 0x00000000-0x00000fff] |
| [ 0.000000] PM: Registered nosave memory: [mem 0x000a0000-0x000fffff] |
| [ 0.000000] PM: Registered nosave memory: [mem 0x7ff39000-0x7fffffff] |
| [ 0.000000] PM: Registered nosave memory: [mem 0x80000000-0x829fffff] |
| [ 0.000000] PM: Registered nosave memory: [mem 0x82a00000-0xefffffff] |
| [ 0.000000] PM: Registered nosave memory: [mem 0xf0000000-0xf3ffffff] |
| [ 0.000000] PM: Registered nosave memory: [mem 0xf4000000-0xfed8ffff] |
| [ 0.000000] PM: Registered nosave memory: [mem 0xfed90000-0xfed91fff] |
| [ 0.000000] PM: Registered nosave memory: [mem 0xfed92000-0xffffffff] |
| [ 0.000000] e820: [mem 0x82a00000-0xefffffff] available for PCI devices |
| [ 0.000000] Booting paravirtualized kernel on bare hardware |
| [ 0.000000] clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 6370452778343963 ns |
| [ 0.000000] random: get_random_bytes called from start_kernel+0x95/0x4da with crng_init=0 |
| [ 0.000000] setup_percpu: NR_CPUS:320 nr_cpumask_bits:320 nr_cpu_ids:4 nr_node_ids:1 |
| [ 0.000000] percpu: Embedded 46 pages/cpu @ (ptrval) s151552 r8192 d28672 u524288 |
| [ 0.000000] pcpu-alloc: s151552 r8192 d28672 u524288 alloc=1*2097152 |
| [ 0.000000] pcpu-alloc: [0] 0 1 2 3 |
| [ 0.000000] Built 1 zonelists, mobility grouping on. Total pages: 2049453 |
| [ 0.000000] Policy zone: Normal |
| [ 0.000000] Kernel command line: BOOT_IMAGE=/vmlinuz-linux root=UUID=a7ef3ac7-5cc1-4350-aa09-e542549bb49b rw modprobe.blacklist=mei_me quiet iomem=relaxed console=tty0 console=ttyS0,115200n8 |
| [ 0.000000] Calgary: detecting Calgary via BIOS EBDA area |
| [ 0.000000] Calgary: Unable to locate Rio Grande table in EBDA - bailing! |
| [ 0.000000] Memory: 8098004K/8328032K available (10252K kernel code, 1261K rwdata, 3408K rodata, 1456K init, 640K bss, 230028K reserved, 0K cma-reserved) |
| [ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1 |
| [ 0.000000] Kernel/User page tables isolation: enabled |
| [ 0.000000] ftrace: allocating 31757 entries in 125 pages |
| [ 0.000000] Preemptible hierarchical RCU implementation. |
| [ 0.000000] CONFIG_RCU_FANOUT set to non-default value of 32 |
| [ 0.000000] RCU dyntick-idle grace-period acceleration is enabled. |
| [ 0.000000] RCU restricting CPUs from NR_CPUS=320 to nr_cpu_ids=4. |
| [ 0.000000] RCU priority boosting: priority 1 delay 500 ms. |
| [ 0.000000] Tasks RCU enabled. |
| [ 0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=4 |
| [ 0.000000] NR_IRQS: 20736, nr_irqs: 456, preallocated irqs: 16 |
| [ 0.000000] Offload RCU callbacks from CPUs: . |
| [ 0.000000] Console: colour VGA+ 80x25 |
| [ 0.000000] console [tty0] enabled |
| [ 0.000000] console [ttyS0] enabled |
| [ 0.000000] ACPI: Core revision 20180105 |
| [ 0.000000] ACPI: 2 ACPI AML tables successfully acquired and loaded |
| [ 0.000000] clocksource: hpet: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 133484882848 ns |
| [ 0.000000] hpet clockevent registered |
| [ 0.000000] APIC: Switch to symmetric I/O mode setup |
| [ 0.000000] DMAR: Host address width 36 |
| [ 0.000000] DMAR: DRHD base: 0x000000fed90000 flags: 0x0 |
| [ 0.000000] DMAR: dmar0: reg_base_addr fed90000 ver 1:0 cap c0000020e60262 ecap f0101a |
| [ 0.000000] DMAR: DRHD base: 0x000000fed91000 flags: 0x1 |
| [ 0.000000] DMAR: dmar1: reg_base_addr fed91000 ver 1:0 cap c9008020660262 ecap f0105a |
| [ 0.000000] DMAR-IR: IOAPIC id 2 under DRHD base 0xfed91000 IOMMU 1 |
| [ 0.000000] DMAR-IR: HPET id 0 under DRHD base 0xfed91000 |
| [ 0.000000] DMAR-IR: Queued invalidation will be enabled to support x2apic and Intr-remapping. |
| [ 0.000000] DMAR-IR: Enabled IRQ remapping in x2apic mode |
| [ 0.000000] x2apic enabled |
| [ 0.000000] Switched APIC routing to cluster x2apic. |
| [ 0.000000] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1 |
| [ 0.016666] tsc: Fast TSC calibration using PIT |
| [ 0.019999] tsc: Detected 2693.202 MHz processor |
| [ 0.019999] clocksource: tsc-early: mask: 0xffffffffffffffff max_cycles: 0x26d228ad2a6, max_idle_ns: 440795270887 ns |
| [ 0.019999] Calibrating delay loop (skipped), value calculated using timer frequency.. 5388.83 BogoMIPS (lpj=8977340) |
| [ 0.019999] pid_max: default: 32768 minimum: 301 |
| [ 0.019999] Security Framework initialized |
| [ 0.019999] Yama: becoming mindful. |
| [ 0.019999] Dentry cache hash table entries: 1048576 (order: 11, 8388608 bytes) |
| [ 0.019999] Inode-cache hash table entries: 524288 (order: 10, 4194304 bytes) |
| [ 0.019999] Mount-cache hash table entries: 16384 (order: 5, 131072 bytes) |
| [ 0.019999] Mountpoint-cache hash table entries: 16384 (order: 5, 131072 bytes) |
| [ 0.019999] CPU: Physical Processor ID: 0 |
| [ 0.019999] CPU: Processor Core ID: 0 |
| [ 0.019999] mce: CPU supports 9 MCE banks |
| [ 0.019999] CPU0: Thermal monitoring enabled (TM1) |
| [ 0.019999] process: using mwait in idle threads |
| [ 0.019999] Last level iTLB entries: 4KB 512, 2MB 8, 4MB 8 |
| [ 0.019999] Last level dTLB entries: 4KB 512, 2MB 32, 4MB 32, 1GB 0 |
| [ 0.019999] Spectre V2 : Mitigation: Full generic retpoline |
| [ 0.019999] Spectre V2 : Spectre v2 mitigation: Enabling Indirect Branch Prediction Barrier |
| [ 0.019999] Spectre V2 : Enabling Restricted Speculation for firmware calls |
| [ 0.019999] Speculative Store Bypass: Vulnerable |
| [ 0.019999] Freeing SMP alternatives memory: 24K |
| [ 0.019999] TSC deadline timer enabled |
| [ 0.019999] smpboot: CPU0: Intel(R) Core(TM) i5-3330S CPU @ 2.70GHz (family: 0x6, model: 0x3a, stepping: 0x9) |
| [ 0.023388] mce: [Hardware Error]: Machine check events logged |
| [ 0.023390] mce: [Hardware Error]: CPU 0: Machine Check: 0 Bank 7: ee2000000003110a |
| [ 0.026674] mce: [Hardware Error]: TSC 0 ADDR feffff40 MISC 1040000086 |
| [ 0.030014] mce: [Hardware Error]: PROCESSOR 0:306a9 TIME 1529916566 SOCKET 0 APIC 0 microcode 1f |
| [ 0.033350] mce: [Hardware Error]: Machine check events logged |
| [ 0.033352] mce: [Hardware Error]: CPU 0: Machine Check: 0 Bank 8: ee2000000003110a |
| [ 0.036672] mce: [Hardware Error]: TSC 0 ADDR feffff00 MISC 1040000086 |
| [ 0.040006] Performance Events: PEBS fmt1+, IvyBridge events, 16-deep LBR, full-width counters, Intel PMU driver. |
| [ 0.040027] ... version: 3 |
| [ 0.040027] ... bit width: 48 |
| [ 0.040028] ... generic registers: 8 |
| [ 0.040029] ... value mask: 0000ffffffffffff |
| [ 0.040029] ... max period: 00007fffffffffff |
| [ 0.040030] ... fixed-purpose events: 3 |
| [ 0.040030] ... event mask: 00000007000000ff |
| [ 0.040062] mce: [Hardware Error]: PROCESSOR 0:306a9 TIME 1529916566 SOCKET 0 APIC 0 microcode 1f |
| [ 0.046675] Hierarchical SRCU implementation. |
| [ 0.066794] NMI watchdog: Enabled. Permanently consumes one hw-PMU counter. |
| [ 0.073338] smp: Bringing up secondary CPUs ... |
| [ 0.103351] x86: Booting SMP configuration: |
| [ 0.103352] .... node #0, CPUs: #1 #2 #3 |
| [ 0.166205] smp: Brought up 1 node, 4 CPUs |
| [ 0.166205] smpboot: Max logical packages: 1 |
| [ 0.166205] smpboot: Total of 4 processors activated (21554.35 BogoMIPS) |
| [ 0.166882] devtmpfs: initialized |
| [ 0.166882] x86/mm: Memory block size: 128MB |
| [ 0.167318] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 6370867519511994 ns |
| [ 0.167318] futex hash table entries: 1024 (order: 4, 65536 bytes) |
| [ 0.167318] pinctrl core: initialized pinctrl subsystem |
| [ 0.167318] RTC time: 8:49:26, date: 06/25/18 |
| [ 0.167318] NET: Registered protocol family 16 |
| [ 0.167318] cpuidle: using governor ladder |
| [ 0.167318] cpuidle: using governor menu |
| [ 0.167318] ACPI: bus type PCI registered |
| [ 0.167318] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5 |
| [ 0.167318] PCI: MMCONFIG for domain 0000 [bus 00-3f] at [mem 0xf0000000-0xf3ffffff] (base 0xf0000000) |
| [ 0.167318] PCI: MMCONFIG at [mem 0xf0000000-0xf3ffffff] reserved in E820 |
| [ 0.167318] PCI: Using configuration type 1 for base access |
| [ 0.167318] core: PMU erratum BJ122, BV98, HSD29 workaround disabled, HT off |
| [ 0.167527] HugeTLB registered 2.00 MiB page size, pre-allocated 0 pages |
| [ 0.167527] ACPI: Added _OSI(Module Device) |
| [ 0.167527] ACPI: Added _OSI(Processor Device) |
| [ 0.167527] ACPI: Added _OSI(3.0 _SCP Extensions) |
| [ 0.167527] ACPI: Added _OSI(Processor Aggregator Device) |
| [ 0.167527] ACPI: Executed 1 blocks of module-level executable AML code |
| [ 0.172357] ACPI: Interpreter enabled |
| [ 0.172373] ACPI: (supports S0 S3 S4 S5) |
| [ 0.172374] ACPI: Using IOAPIC for interrupt routing |
| [ 0.172398] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug |
| [ 0.176258] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff]) |
| [ 0.176263] acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI] |
| [ 0.176327] acpi PNP0A08:00: _OSC: OS now controls [PCIeHotplug PME AER PCIeCapability] |
| [ 0.176338] acpi PNP0A08:00: [Firmware Info]: MMCONFIG for domain 0000 [bus 00-3f] only partially covers this bridge |
| [ 0.176608] PCI host bridge to bus 0000:00 |
| [ 0.176610] pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7 window] |
| [ 0.176612] pci_bus 0000:00: root bus resource [io 0x0d00-0xffff window] |
| [ 0.176613] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff window] |
| [ 0.176614] pci_bus 0000:00: root bus resource [mem 0x000c0000-0x000c3fff window] |
| [ 0.176616] pci_bus 0000:00: root bus resource [mem 0x000c4000-0x000c7fff window] |
| [ 0.176617] pci_bus 0000:00: root bus resource [mem 0x000c8000-0x000cbfff window] |
| [ 0.176618] pci_bus 0000:00: root bus resource [mem 0x000cc000-0x000cffff window] |
| [ 0.176619] pci_bus 0000:00: root bus resource [mem 0x000d0000-0x000d3fff window] |
| [ 0.176621] pci_bus 0000:00: root bus resource [mem 0x000d4000-0x000d7fff window] |
| [ 0.176622] pci_bus 0000:00: root bus resource [mem 0x000d8000-0x000dbfff window] |
| [ 0.176623] pci_bus 0000:00: root bus resource [mem 0x000dc000-0x000dffff window] |
| [ 0.176624] pci_bus 0000:00: root bus resource [mem 0x000e0000-0x000e3fff window] |
| [ 0.176626] pci_bus 0000:00: root bus resource [mem 0x000e4000-0x000e7fff window] |
| [ 0.176627] pci_bus 0000:00: root bus resource [mem 0x000e8000-0x000ebfff window] |
| [ 0.176628] pci_bus 0000:00: root bus resource [mem 0x000ec000-0x000effff window] |
| [ 0.176629] pci_bus 0000:00: root bus resource [mem 0x000f0000-0x000fffff window] |
| [ 0.176631] pci_bus 0000:00: root bus resource [mem 0x82a00001-0xefffffff window] |
| [ 0.176632] pci_bus 0000:00: root bus resource [mem 0xfed40000-0xfed44fff window] |
| [ 0.176634] pci_bus 0000:00: root bus resource [bus 00-ff] |
| [ 0.176641] pci 0000:00:00.0: [8086:0150] type 00 class 0x060000 |
| [ 0.176738] pci 0000:00:01.0: [8086:0151] type 01 class 0x060400 |
| [ 0.176770] pci 0000:00:01.0: PME# supported from D0 D3hot D3cold |
| [ 0.176847] pci 0000:00:02.0: [8086:0152] type 00 class 0x030000 |
| [ 0.176858] pci 0000:00:02.0: reg 0x10: [mem 0xe0000000-0xe03fffff 64bit] |
| [ 0.176864] pci 0000:00:02.0: reg 0x18: [mem 0xd0000000-0xdfffffff 64bit pref] |
| [ 0.176868] pci 0000:00:02.0: reg 0x20: [io 0x3000-0x303f] |
| [ 0.176977] pci 0000:00:1a.0: [8086:1c2d] type 00 class 0x0c0320 |
| [ 0.177000] pci 0000:00:1a.0: reg 0x10: [mem 0xe0705000-0xe07053ff] |
| [ 0.177085] pci 0000:00:1a.0: PME# supported from D0 D3hot D3cold |
| [ 0.177168] pci 0000:00:1b.0: [8086:1c20] type 00 class 0x040300 |
| [ 0.177191] pci 0000:00:1b.0: reg 0x10: [mem 0xe0700000-0xe0703fff 64bit] |
| [ 0.177266] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold |
| [ 0.177348] pci 0000:00:1c.0: [8086:1c10] type 01 class 0x060400 |
| [ 0.177427] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold |
| [ 0.177510] pci 0000:00:1c.1: [8086:1c12] type 01 class 0x060400 |
| [ 0.177588] pci 0000:00:1c.1: PME# supported from D0 D3hot D3cold |
| [ 0.177670] pci 0000:00:1c.2: [8086:1c14] type 01 class 0x060400 |
| [ 0.177754] pci 0000:00:1c.2: PME# supported from D0 D3hot D3cold |
| [ 0.177838] pci 0000:00:1c.3: [8086:1c16] type 01 class 0x060400 |
| [ 0.177922] pci 0000:00:1c.3: PME# supported from D0 D3hot D3cold |
| [ 0.178003] pci 0000:00:1c.4: [8086:1c18] type 01 class 0x060400 |
| [ 0.178081] pci 0000:00:1c.4: PME# supported from D0 D3hot D3cold |
| [ 0.178164] pci 0000:00:1c.5: [8086:1c1a] type 01 class 0x060400 |
| [ 0.178246] pci 0000:00:1c.5: PME# supported from D0 D3hot D3cold |
| [ 0.178329] pci 0000:00:1d.0: [8086:1c26] type 00 class 0x0c0320 |
| [ 0.178352] pci 0000:00:1d.0: reg 0x10: [mem 0xe0706000-0xe07063ff] |
| [ 0.178437] pci 0000:00:1d.0: PME# supported from D0 D3hot D3cold |
| [ 0.178515] pci 0000:00:1f.0: [8086:1c5c] type 00 class 0x060100 |
| [ 0.178691] pci 0000:00:1f.2: [8086:1c02] type 00 class 0x010601 |
| [ 0.178712] pci 0000:00:1f.2: reg 0x10: [io 0x3060-0x3067] |
| [ 0.178721] pci 0000:00:1f.2: reg 0x14: [io 0x3070-0x3073] |
| [ 0.178730] pci 0000:00:1f.2: reg 0x18: [io 0x3068-0x306f] |
| [ 0.178738] pci 0000:00:1f.2: reg 0x1c: [io 0x3074-0x3077] |
| [ 0.178746] pci 0000:00:1f.2: reg 0x20: [io 0x3040-0x305f] |
| [ 0.178755] pci 0000:00:1f.2: reg 0x24: [mem 0xe0704000-0xe07047ff] |
| [ 0.178800] pci 0000:00:1f.2: PME# supported from D3hot |
| [ 0.178871] pci 0000:00:1f.3: [8086:1c22] type 00 class 0x0c0500 |
| [ 0.178891] pci 0000:00:1f.3: reg 0x10: [mem 0xe0707000-0xe07070ff 64bit] |
| [ 0.178912] pci 0000:00:1f.3: reg 0x20: [io 0x0400-0x041f] |
| [ 0.179027] pci 0000:00:01.0: PCI bridge to [bus 01] |
| [ 0.179071] pci 0000:00:1c.0: PCI bridge to [bus 02] |
| [ 0.179120] pci 0000:00:1c.1: PCI bridge to [bus 03] |
| [ 0.179188] pci 0000:04:00.0: [10ec:8168] type 00 class 0x020000 |
| [ 0.179223] pci 0000:04:00.0: reg 0x10: [io 0x1000-0x10ff] |
| [ 0.179257] pci 0000:04:00.0: reg 0x18: [mem 0xe0404000-0xe0404fff 64bit pref] |
| [ 0.179279] pci 0000:04:00.0: reg 0x20: [mem 0xe0400000-0xe0403fff 64bit pref] |
| [ 0.179394] pci 0000:04:00.0: supports D1 D2 |
| [ 0.179395] pci 0000:04:00.0: PME# supported from D0 D1 D2 D3hot D3cold |
| [ 0.186699] pci 0000:00:1c.2: PCI bridge to [bus 04] |
| [ 0.186706] pci 0000:00:1c.2: bridge window [io 0x1000-0x1fff] |
| [ 0.186727] pci 0000:00:1c.2: bridge window [mem 0xe0400000-0xe04fffff 64bit pref] |
| [ 0.186798] pci 0000:05:00.0: [1b21:1042] type 00 class 0x0c0330 |
| [ 0.186855] pci 0000:05:00.0: reg 0x10: [mem 0xe0500000-0xe0507fff 64bit] |
| [ 0.187074] pci 0000:05:00.0: PME# supported from D3hot D3cold |
| [ 0.196693] pci 0000:00:1c.3: PCI bridge to [bus 05] |
| [ 0.196701] pci 0000:00:1c.3: bridge window [mem 0xe0500000-0xe05fffff] |
| [ 0.196761] pci 0000:00:1c.4: PCI bridge to [bus 06] |
| [ 0.196830] pci 0000:07:00.0: [1b21:0611] type 00 class 0x010185 |
| [ 0.196860] pci 0000:07:00.0: reg 0x10: [io 0x2010-0x2017] |
| [ 0.196874] pci 0000:07:00.0: reg 0x14: [io 0x2020-0x2023] |
| [ 0.196887] pci 0000:07:00.0: reg 0x18: [io 0x2018-0x201f] |
| [ 0.196901] pci 0000:07:00.0: reg 0x1c: [io 0x2024-0x2027] |
| [ 0.196914] pci 0000:07:00.0: reg 0x20: [io 0x2000-0x200f] |
| [ 0.196928] pci 0000:07:00.0: reg 0x24: [mem 0xe0600000-0xe06001ff] |
| [ 0.206691] pci 0000:00:1c.5: PCI bridge to [bus 07] |
| [ 0.206697] pci 0000:00:1c.5: bridge window [io 0x2000-0x2fff] |
| [ 0.206702] pci 0000:00:1c.5: bridge window [mem 0xe0600000-0xe06fffff] |
| [ 0.206946] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 10 *11 12 14 15) |
| [ 0.207011] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 10 *11 12 14 15) |
| [ 0.207075] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 7 10 *11 12 14 15) |
| [ 0.207139] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 10 *11 12 14 15) |
| [ 0.207202] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 10 *11 12 14 15) |
| [ 0.207266] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 10 *11 12 14 15) |
| [ 0.207329] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 7 10 *11 12 14 15) |
| [ 0.207391] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 7 10 *11 12 14 15) |
| [ 0.207613] pci 0000:00:02.0: vgaarb: setting as boot VGA device |
| [ 0.207613] pci 0000:00:02.0: vgaarb: VGA device added: decodes=io+mem,owns=io+mem,locks=none |
| [ 0.207613] pci 0000:00:02.0: vgaarb: bridge control possible |
| [ 0.207613] vgaarb: loaded |
| [ 0.207613] EDAC MC: Ver: 3.0.0 |
| [ 0.207616] PCI: Using ACPI for IRQ routing |
| [ 0.208174] PCI: pci_cache_line_size set to 64 bytes |
| [ 0.208229] e820: reserve RAM buffer [mem 0x7ff39000-0x7fffffff] |
| [ 0.208231] e820: reserve RAM buffer [mem 0x27c600000-0x27fffffff] |
| [ 0.208315] NetLabel: Initializing |
| [ 0.208316] NetLabel: domain hash size = 128 |
| [ 0.208316] NetLabel: protocols = UNLABELED CIPSOv4 CALIPSO |
| [ 0.208329] NetLabel: unlabeled traffic allowed by default |
| [ 0.208333] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0, 0, 0, 0, 0 |
| [ 0.208333] hpet0: 8 comparators, 64-bit 14.318180 MHz counter |
| [ 0.211018] clocksource: Switched to clocksource tsc-early |
| [ 0.219149] VFS: Disk quotas dquot_6.6.0 |
| [ 0.219165] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes) |
| [ 0.219223] pnp: PnP ACPI init |
| [ 0.219402] system 00:00: [mem 0xfed1c000-0xfed1ffff] has been reserved |
| [ 0.219404] system 00:00: [mem 0xfed10000-0xfed17fff] has been reserved |
| [ 0.219405] system 00:00: [mem 0xfed18000-0xfed18fff] has been reserved |
| [ 0.219407] system 00:00: [mem 0xfed19000-0xfed19fff] has been reserved |
| [ 0.219408] system 00:00: [mem 0xf0000000-0xf3ffffff] has been reserved |
| [ 0.219409] system 00:00: [mem 0xfed20000-0xfed3ffff] has been reserved |
| [ 0.219411] system 00:00: [mem 0xfed40000-0xfed44fff] has been reserved |
| [ 0.219412] system 00:00: [mem 0xfed45000-0xfed8ffff] has been reserved |
| [ 0.219414] system 00:00: [mem 0x20000000-0x201fffff] could not be reserved |
| [ 0.219415] system 00:00: [mem 0x40000000-0x401fffff] could not be reserved |
| [ 0.219421] system 00:00: Plug and Play ACPI device, IDs PNP0c02 (active) |
| [ 0.219688] system 00:01: [mem 0xfed00000-0xfed003ff] has been reserved |
| [ 0.219692] system 00:01: Plug and Play ACPI device, IDs PNP0103 PNP0c01 (active) |
| [ 0.219729] system 00:02: [io 0x0500-0x057f] has been reserved |
| [ 0.219731] system 00:02: [io 0x0480-0x04bf] has been reserved |
| [ 0.219734] system 00:02: Plug and Play ACPI device, IDs PNP0c02 (active) |
| [ 0.219753] pnp 00:03: Plug and Play ACPI device, IDs PNP0b00 (active) |
| [ 0.219784] pnp 00:04: Plug and Play ACPI device, IDs PNP0303 PNP030b (active) |
| [ 0.219809] pnp 00:05: Plug and Play ACPI device, IDs PNP0f13 (active) |
| [ 0.219844] pnp 00:06: Plug and Play ACPI device, IDs PNP0303 PNP030b (active) |
| [ 0.219868] pnp 00:07: Plug and Play ACPI device, IDs PNP0f13 (active) |
| [ 0.219881] pnp: PnP ACPI: found 8 devices |
| [ 0.225527] clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns |
| [ 0.225579] pci 0000:00:01.0: PCI bridge to [bus 01] |
| [ 0.225585] pci 0000:00:1c.0: PCI bridge to [bus 02] |
| [ 0.225597] pci 0000:00:1c.1: PCI bridge to [bus 03] |
| [ 0.225608] pci 0000:00:1c.2: PCI bridge to [bus 04] |
| [ 0.225611] pci 0000:00:1c.2: bridge window [io 0x1000-0x1fff] |
| [ 0.225619] pci 0000:00:1c.2: bridge window [mem 0xe0400000-0xe04fffff 64bit pref] |
| [ 0.225625] pci 0000:00:1c.3: PCI bridge to [bus 05] |
| [ 0.225630] pci 0000:00:1c.3: bridge window [mem 0xe0500000-0xe05fffff] |
| [ 0.225638] pci 0000:00:1c.4: PCI bridge to [bus 06] |
| [ 0.225650] pci 0000:00:1c.5: PCI bridge to [bus 07] |
| [ 0.225652] pci 0000:00:1c.5: bridge window [io 0x2000-0x2fff] |
| [ 0.225657] pci 0000:00:1c.5: bridge window [mem 0xe0600000-0xe06fffff] |
| [ 0.225666] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7 window] |
| [ 0.225668] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff window] |
| [ 0.225669] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff window] |
| [ 0.225671] pci_bus 0000:00: resource 7 [mem 0x000c0000-0x000c3fff window] |
| [ 0.225672] pci_bus 0000:00: resource 8 [mem 0x000c4000-0x000c7fff window] |
| [ 0.225673] pci_bus 0000:00: resource 9 [mem 0x000c8000-0x000cbfff window] |
| [ 0.225675] pci_bus 0000:00: resource 10 [mem 0x000cc000-0x000cffff window] |
| [ 0.225676] pci_bus 0000:00: resource 11 [mem 0x000d0000-0x000d3fff window] |
| [ 0.225677] pci_bus 0000:00: resource 12 [mem 0x000d4000-0x000d7fff window] |
| [ 0.225678] pci_bus 0000:00: resource 13 [mem 0x000d8000-0x000dbfff window] |
| [ 0.225680] pci_bus 0000:00: resource 14 [mem 0x000dc000-0x000dffff window] |
| [ 0.225681] pci_bus 0000:00: resource 15 [mem 0x000e0000-0x000e3fff window] |
| [ 0.225682] pci_bus 0000:00: resource 16 [mem 0x000e4000-0x000e7fff window] |
| [ 0.225684] pci_bus 0000:00: resource 17 [mem 0x000e8000-0x000ebfff window] |
| [ 0.225685] pci_bus 0000:00: resource 18 [mem 0x000ec000-0x000effff window] |
| [ 0.225686] pci_bus 0000:00: resource 19 [mem 0x000f0000-0x000fffff window] |
| [ 0.225688] pci_bus 0000:00: resource 20 [mem 0x82a00001-0xefffffff window] |
| [ 0.225689] pci_bus 0000:00: resource 21 [mem 0xfed40000-0xfed44fff window] |
| [ 0.225691] pci_bus 0000:04: resource 0 [io 0x1000-0x1fff] |
| [ 0.225692] pci_bus 0000:04: resource 2 [mem 0xe0400000-0xe04fffff 64bit pref] |
| [ 0.225693] pci_bus 0000:05: resource 1 [mem 0xe0500000-0xe05fffff] |
| [ 0.225695] pci_bus 0000:07: resource 0 [io 0x2000-0x2fff] |
| [ 0.225696] pci_bus 0000:07: resource 1 [mem 0xe0600000-0xe06fffff] |
| [ 0.225772] NET: Registered protocol family 2 |
| [ 0.225892] tcp_listen_portaddr_hash hash table entries: 4096 (order: 4, 65536 bytes) |
| [ 0.225919] TCP established hash table entries: 65536 (order: 7, 524288 bytes) |
| [ 0.226027] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes) |
| [ 0.226144] TCP: Hash tables configured (established 65536 bind 65536) |
| [ 0.226169] UDP hash table entries: 4096 (order: 5, 131072 bytes) |
| [ 0.226190] UDP-Lite hash table entries: 4096 (order: 5, 131072 bytes) |
| [ 0.226235] NET: Registered protocol family 1 |
| [ 0.226256] pci 0000:00:02.0: Video device with shadowed ROM at [mem 0x000c0000-0x000dffff] |
| [ 0.227255] PCI: CLS 64 bytes, default 64 |
| [ 0.227289] Unpacking initramfs... |
| [ 0.332376] Freeing initrd memory: 9176K |
| [ 0.332414] PCI-DMA: Using software bounce buffering for IO (SWIOTLB) |
| [ 0.332417] software IO TLB [mem 0x7bf39000-0x7ff39000] (64MB) mapped at [ (ptrval)- (ptrval)] |
| [ 0.332557] Scanning for low memory corruption every 60 seconds |
| [ 0.332995] Initialise system trusted keyrings |
| [ 0.333005] Key type blacklist registered |
| [ 0.333046] workingset: timestamp_bits=41 max_order=21 bucket_order=0 |
| [ 0.334048] zbud: loaded |
| [ 0.335061] Key type asymmetric registered |
| [ 0.335062] Asymmetric key parser 'x509' registered |
| [ 0.335084] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 247) |
| [ 0.335107] io scheduler noop registered |
| [ 0.335108] io scheduler deadline registered |
| [ 0.335142] io scheduler cfq registered (default) |
| [ 0.335143] io scheduler mq-deadline registered |
| [ 0.335143] io scheduler kyber registered |
| [ 0.335148] io scheduler bfq registered |
| [ 0.336287] pcieport 0000:00:01.0: Signaling PME with IRQ 26 |
| [ 0.336308] pcieport 0000:00:1c.0: Signaling PME with IRQ 27 |
| [ 0.336328] pcieport 0000:00:1c.1: Signaling PME with IRQ 28 |
| [ 0.336347] pcieport 0000:00:1c.2: Signaling PME with IRQ 29 |
| [ 0.336363] pcieport 0000:00:1c.3: Signaling PME with IRQ 30 |
| [ 0.336380] pcieport 0000:00:1c.4: Signaling PME with IRQ 31 |
| [ 0.336399] pcieport 0000:00:1c.5: Signaling PME with IRQ 32 |
| [ 0.336459] intel_idle: MWAIT substates: 0x1120 |
| [ 0.336459] intel_idle: v0.4.1 model 0x3A |
| [ 0.336558] intel_idle: lapic_timer_reliable_states 0xffffffff |
| [ 0.336607] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input0 |
| [ 0.336623] ACPI: Power Button [PWRF] |
| [ 0.336703] ACPI: Video Device [GFX0] (multi-head: yes rom: no post: no) |
| [ 0.337079] acpi device:0b: registered as cooling_device0 |
| [ 0.337120] input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:00/input/input1 |
| [ 0.350226] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled |
| [ 0.370910] serial8250: ttyS0 at I/O 0x3f8 (irq = 4, base_baud = 115200) is a 16550A |
| [ 0.372403] intel_pstate: Intel P-state driver initializing |
| [ 0.372741] ledtrig-cpu: registered to indicate activity on CPUs |
| [ 0.373060] NET: Registered protocol family 10 |
| [ 0.378485] Segment Routing with IPv6 |
| [ 0.378519] NET: Registered protocol family 17 |
| [ 0.379010] RAS: Correctable Errors collector initialized. |
| [ 0.379060] microcode: sig=0x306a9, pf=0x2, revision=0x1f |
| [ 0.379161] microcode: Microcode Update Driver: v2.2. |
| [ 0.379173] sched_clock: Marking stable (379153862, 0)->(393219437, -14065575) |
| [ 0.379443] registered taskstats version 1 |
| [ 0.379452] Loading compiled-in X.509 certificates |
| [ 0.379474] zswap: loaded using pool lzo/zbud |
| [ 0.383976] Key type big_key registered |
| [ 0.384342] Magic number: 6:513:827 |
| [ 0.384391] hctosys: unable to open rtc device (rtc0) |
| [ 0.386595] Freeing unused kernel memory: 1456K |
| [ 0.386596] Write protecting the kernel read-only data: 16384k |
| [ 0.387311] Freeing unused kernel memory: 2016K |
| [ 0.389404] Freeing unused kernel memory: 688K |
| [ 0.454625] i8042: PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at 0x60,0x64 irq 1,12 |
| [ 0.457951] serio: i8042 KBD port at 0x60,0x64 irq 1 |
| [ 0.458048] serio: i8042 AUX port at 0x60,0x64 irq 12 |
| [ 0.460047] ACPI: bus type USB registered |
| [ 0.460064] usbcore: registered new interface driver usbfs |
| [ 0.460071] usbcore: registered new interface driver hub |
| [ 0.460095] usbcore: registered new device driver usb |
| [ 0.461714] SCSI subsystem initialized |
| [ 0.462523] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver |
| [ 0.464754] ehci-pci: EHCI PCI platform driver |
| [ 0.464898] ehci-pci 0000:00:1a.0: EHCI Host Controller |
| [ 0.464904] ehci-pci 0000:00:1a.0: new USB bus registered, assigned bus number 1 |
| [ 0.464917] ehci-pci 0000:00:1a.0: debug port 2 |
| [ 0.468808] ehci-pci 0000:00:1a.0: cache line size of 64 is not supported |
| [ 0.468827] ehci-pci 0000:00:1a.0: irq 21, io mem 0xe0705000 |
| [ 0.469022] libata version 3.00 loaded. |
| [ 0.480040] ehci-pci 0000:00:1a.0: USB 2.0 started, EHCI 1.00 |
| [ 0.480131] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002 |
| [ 0.480133] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 |
| [ 0.480134] usb usb1: Product: EHCI Host Controller |
| [ 0.480135] usb usb1: Manufacturer: Linux 4.16.13-2-ARCH ehci_hcd |
| [ 0.480136] usb usb1: SerialNumber: 0000:00:1a.0 |
| [ 0.480379] hub 1-0:1.0: USB hub found |
| [ 0.480385] hub 1-0:1.0: 3 ports detected |
| [ 0.480624] ehci-pci 0000:00:1d.0: EHCI Host Controller |
| [ 0.480628] ehci-pci 0000:00:1d.0: new USB bus registered, assigned bus number 2 |
| [ 0.480639] ehci-pci 0000:00:1d.0: debug port 2 |
| [ 0.484522] ehci-pci 0000:00:1d.0: cache line size of 64 is not supported |
| [ 0.484539] ehci-pci 0000:00:1d.0: irq 19, io mem 0xe0706000 |
| [ 0.496713] ehci-pci 0000:00:1d.0: USB 2.0 started, EHCI 1.00 |
| [ 0.496782] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002 |
| [ 0.496784] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1 |
| [ 0.496785] usb usb2: Product: EHCI Host Controller |
| [ 0.496787] usb usb2: Manufacturer: Linux 4.16.13-2-ARCH ehci_hcd |
| [ 0.496788] usb usb2: SerialNumber: 0000:00:1d.0 |
| [ 0.497020] hub 2-0:1.0: USB hub found |
| [ 0.497031] hub 2-0:1.0: 3 ports detected |
| [ 0.497243] ahci 0000:00:1f.2: version 3.0 |
| [ 0.497457] ahci 0000:00:1f.2: SSS flag set, parallel bus scan disabled |
| [ 0.510082] ahci 0000:00:1f.2: AHCI 0001.0300 32 slots 4 ports 3 Gbps 0x33 impl SATA mode |
| [ 0.510087] ahci 0000:00:1f.2: flags: 64bit ncq sntf ilck stag pm led clo pio slum part apst |
| [ 0.511056] scsi host0: ahci |
| [ 0.511348] scsi host1: ahci |
| [ 0.511510] scsi host2: ahci |
| [ 0.511717] scsi host3: ahci |
| [ 0.511884] scsi host4: ahci |
| [ 0.512031] scsi host5: ahci |
| [ 0.512104] ata1: SATA max UDMA/133 abar m2048@0xe0704000 port 0xe0704100 irq 33 |
| [ 0.512108] ata2: SATA max UDMA/133 abar m2048@0xe0704000 port 0xe0704180 irq 33 |
| [ 0.512109] ata3: DUMMY |
| [ 0.512110] ata4: DUMMY |
| [ 0.512113] ata5: SATA max UDMA/133 abar m2048@0xe0704000 port 0xe0704300 irq 33 |
| [ 0.512116] ata6: SATA max UDMA/133 abar m2048@0xe0704000 port 0xe0704380 irq 33 |
| [ 0.512686] ahci 0000:07:00.0: SSS flag set, parallel bus scan disabled |
| [ 0.512730] ahci 0000:07:00.0: AHCI 0001.0200 32 slots 2 ports 6 Gbps 0x3 impl IDE mode |
| [ 0.512734] ahci 0000:07:00.0: flags: 64bit ncq sntf stag led clo pmp pio slum part ccc sxs |
| [ 0.513049] scsi host6: ahci |
| [ 0.513175] scsi host7: ahci |
| [ 0.513249] ata7: SATA max UDMA/133 abar m512@0xe0600000 port 0xe0600100 irq 34 |
| [ 0.513253] ata8: SATA max UDMA/133 abar m512@0xe0600000 port 0xe0600180 irq 34 |
| [ 0.810025] usb 1-1: new high-speed USB device number 2 using ehci-pci |
| [ 0.826706] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300) |
| [ 0.826991] ata1.00: ATA-10: KINGSTON SA400S37240G, SBFK71B1, max UDMA/133 |
| [ 0.826995] ata1.00: 468862128 sectors, multi 1: LBA48 NCQ (depth 31/32), AA |
| [ 0.827293] ata1.00: configured for UDMA/133 |
| [ 0.827554] scsi 0:0:0:0: Direct-Access ATA KINGSTON SA400S3 71B1 PQ: 0 ANSI: 5 |
| [ 0.830049] ata7: SATA link down (SStatus 0 SControl 300) |
| [ 0.833345] usb 2-1: new high-speed USB device number 2 using ehci-pci |
| [ 0.957061] usb 1-1: New USB device found, idVendor=8087, idProduct=0024 |
| [ 0.957065] usb 1-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0 |
| [ 0.957489] hub 1-1:1.0: USB hub found |
| [ 0.957679] hub 1-1:1.0: 4 ports detected |
| [ 0.983805] usb 2-1: New USB device found, idVendor=8087, idProduct=0024 |
| [ 0.983809] usb 2-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0 |
| [ 0.984231] hub 2-1:1.0: USB hub found |
| [ 0.984402] hub 2-1:1.0: 6 ports detected |
| [ 1.146516] ata2: SATA link down (SStatus 0 SControl 300) |
| [ 1.263366] usb 2-1.4: new low-speed USB device number 3 using ehci-pci |
| [ 1.333367] tsc: Refined TSC clocksource calibration: 2693.207 MHz |
| [ 1.333376] clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x26d22d17775, max_idle_ns: 440795240804 ns |
| [ 1.333414] clocksource: Switched to clocksource tsc |
| [ 1.375431] usb 2-1.4: New USB device found, idVendor=03f0, idProduct=0024 |
| [ 1.375435] usb 2-1.4: New USB device strings: Mfr=1, Product=2, SerialNumber=0 |
| [ 1.375437] usb 2-1.4: Product: HP Basic USB Keyboard |
| [ 1.375439] usb 2-1.4: Manufacturer: CHICONY |
| [ 1.379172] hidraw: raw HID events driver (C) Jiri Kosina |
| [ 1.387489] usbcore: registered new interface driver usbhid |
| [ 1.387490] usbhid: USB HID core driver |
| [ 1.389058] input: CHICONY HP Basic USB Keyboard as /devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.4/2-1.4:1.0/0003:03F0:0024.0001/input/input4 |
| [ 1.443503] hid-generic 0003:03F0:0024.0001: input,hidraw0: USB HID v1.11 Keyboard [CHICONY HP Basic USB Keyboard] on usb-0000:00:1d.0-1.4/input0 |
| [ 1.446701] usb 2-1.6: new low-speed USB device number 4 using ehci-pci |
| [ 1.459939] ata5: SATA link down (SStatus 0 SControl 300) |
| [ 1.549808] usb 2-1.6: New USB device found, idVendor=046d, idProduct=c050 |
| [ 1.549811] usb 2-1.6: New USB device strings: Mfr=1, Product=2, SerialNumber=0 |
| [ 1.549814] usb 2-1.6: Product: USB-PS/2 Optical Mouse |
| [ 1.549816] usb 2-1.6: Manufacturer: Logitech |
| [ 1.553946] input: Logitech USB-PS/2 Optical Mouse as /devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.6/2-1.6:1.0/0003:046D:C050.0002/input/input5 |
| [ 1.554072] hid-generic 0003:046D:C050.0002: input,hidraw1: USB HID v1.10 Mouse [Logitech USB-PS/2 Optical Mouse] on usb-0000:00:1d.0-1.6/input0 |
| [ 1.773214] ata6: SATA link down (SStatus 0 SControl 300) |
| [ 2.086565] ata8: SATA link down (SStatus 0 SControl 300) |
| [ 2.091217] sd 0:0:0:0: [sda] 468862128 512-byte logical blocks: (240 GB/224 GiB) |
| [ 2.091231] sd 0:0:0:0: [sda] Write Protect is off |
| [ 2.091233] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 |
| [ 2.091296] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA |
| [ 2.093701] sda: sda1 sda2 sda3 |
| [ 2.094088] sd 0:0:0:0: [sda] Attached SCSI disk |
| [ 2.201535] random: fast init done |
| [ 2.206666] EXT4-fs (sda1): mounted filesystem with ordered data mode. Opts: (null) |
| [ 2.387634] systemd[1]: systemd 238 running in system mode. (+PAM -AUDIT -SELINUX -IMA -APPARMOR +SMACK -SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ +LZ4 +SECCOMP +BLKID +ELFUTILS +KMOD -IDN2 +IDN +PCRE2 default-hierarchy=hybrid) |
| [ 2.403568] systemd[1]: Detected architecture x86-64. |
| [ 2.406173] systemd[1]: Set hostname to <crimsonhell>. |
| [ 2.530948] random: systemd: uninitialized urandom read (16 bytes read) |
| [ 2.531763] systemd[1]: Created slice system-serial\x2dgetty.slice. |
| [ 2.531796] random: systemd: uninitialized urandom read (16 bytes read) |
| [ 2.531838] systemd[1]: Listening on Device-mapper event daemon FIFOs. |
| [ 2.531893] random: systemd: uninitialized urandom read (16 bytes read) |
| [ 2.531993] systemd[1]: Set up automount Arbitrary Executable File Formats File System Automount Point. |
| [ 2.532170] systemd[1]: Created slice system-getty.slice. |
| [ 2.533463] systemd[1]: Listening on Process Core Dump Socket. |
| [ 2.533481] systemd[1]: Reached target Remote File Systems. |
| [ 2.533556] systemd[1]: Listening on Journal Socket. |
| [ 2.547834] EXT4-fs (sda1): re-mounted. Opts: data=ordered |
| [ 2.597843] systemd-journald[237]: Received request to flush runtime journal from PID 1 |
| [ 2.706817] EDAC ie31200: No ECC support |
| [ 2.712627] ACPI Warning: SystemIO range 0x0000000000000528-0x000000000000052F conflicts with OpRegion 0x0000000000000500-0x000000000000057F (\PMIO) (20180105/utaddress-247) |
| [ 2.712632] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver |
| [ 2.712635] ACPI Warning: SystemIO range 0x00000000000004C0-0x00000000000004CF conflicts with OpRegion 0x0000000000000480-0x00000000000004EB (\GPIO) (20180105/utaddress-247) |
| [ 2.712638] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver |
| [ 2.712639] ACPI Warning: SystemIO range 0x00000000000004B0-0x00000000000004BF conflicts with OpRegion 0x0000000000000480-0x00000000000004EB (\GPIO) (20180105/utaddress-247) |
| [ 2.712641] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver |
| [ 2.712642] ACPI Warning: SystemIO range 0x0000000000000480-0x00000000000004AF conflicts with OpRegion 0x0000000000000480-0x00000000000004EB (\GPIO) (20180105/utaddress-247) |
| [ 2.712645] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver |
| [ 2.712645] lpc_ich: Resource conflict(s) found affecting gpio_ich |
| [ 2.722328] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4 |
| [ 2.739702] rtc_cmos 00:03: RTC can wake from S4 |
| [ 2.739829] rtc_cmos 00:03: rtc core: registered rtc_cmos as rtc0 |
| [ 2.739860] rtc_cmos 00:03: alarms up to one month, 242 bytes nvram, hpet irqs |
| [ 2.740425] Linux agpgart interface v0.103 |
| [ 2.770614] r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded |
| [ 2.771616] r8169 0000:04:00.0 eth0: RTL8168evl/8111evl at 0x (ptrval), 00:e0:4c:68:00:ca, XID 0c900800 IRQ 35 |
| [ 2.771618] r8169 0000:04:00.0 eth0: jumbo features [frames: 9200 bytes, tx checksumming: ko] |
| [ 2.774988] Adding 8388604k swap on /swapfile. Priority:-2 extents:49 across:14082044k SSFS |
| [ 2.781780] input: PC Speaker as /devices/platform/pcspkr/input/input6 |
| [ 2.788092] i801_smbus 0000:00:1f.3: SMBus using PCI interrupt |
| [ 2.788780] RAPL PMU: API unit is 2^-32 Joules, 3 fixed counters, 163840 ms ovfl timer |
| [ 2.788781] RAPL PMU: hw unit of domain pp0-core 2^-16 Joules |
| [ 2.788782] RAPL PMU: hw unit of domain package 2^-16 Joules |
| [ 2.788782] RAPL PMU: hw unit of domain pp1-gpu 2^-16 Joules |
| [ 2.793109] xhci_hcd 0000:05:00.0: xHCI Host Controller |
| [ 2.793116] xhci_hcd 0000:05:00.0: new USB bus registered, assigned bus number 3 |
| [ 2.797512] xhci_hcd 0000:05:00.0: hcc params 0x0200f180 hci version 0x96 quirks 0x00080000 |
| [ 2.797768] usb usb3: New USB device found, idVendor=1d6b, idProduct=0002 |
| [ 2.797770] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1 |
| [ 2.797771] usb usb3: Product: xHCI Host Controller |
| [ 2.797772] usb usb3: Manufacturer: Linux 4.16.13-2-ARCH xhci-hcd |
| [ 2.797774] usb usb3: SerialNumber: 0000:05:00.0 |
| [ 2.797909] hub 3-0:1.0: USB hub found |
| [ 2.797919] hub 3-0:1.0: 2 ports detected |
| [ 2.798020] xhci_hcd 0000:05:00.0: xHCI Host Controller |
| [ 2.798024] xhci_hcd 0000:05:00.0: new USB bus registered, assigned bus number 4 |
| [ 2.798026] xhci_hcd 0000:05:00.0: Host supports USB 3.0 SuperSpeed |
| [ 2.798048] usb usb4: We don't know the algorithms for LPM for this host, disabling LPM. |
| [ 2.798067] usb usb4: New USB device found, idVendor=1d6b, idProduct=0003 |
| [ 2.798069] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1 |
| [ 2.798070] usb usb4: Product: xHCI Host Controller |
| [ 2.798071] usb usb4: Manufacturer: Linux 4.16.13-2-ARCH xhci-hcd |
| [ 2.798072] usb usb4: SerialNumber: 0000:05:00.0 |
| [ 2.798188] hub 4-0:1.0: USB hub found |
| [ 2.798201] hub 4-0:1.0: 2 ports detected |
| [ 2.850311] iTCO_vendor_support: vendor-support=0 |
| [ 2.850739] mousedev: PS/2 mouse device common for all mice |
| [ 2.854391] r8169 0000:04:00.0 enp4s0: renamed from eth0 |
| [ 2.855102] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.11 |
| [ 2.855149] iTCO_wdt: Found a Cougar Point TCO device (Version=2, TCOBASE=0x0560) |
| [ 2.855311] iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0) |
| [ 2.896767] cryptd: max_cpu_qlen set to 1000 |
| [ 2.906219] AVX version of gcm_enc/dec engaged. |
| [ 2.906221] AES CTR mode by8 optimization enabled |
| [ 3.007316] [drm] Replacing VGA console driver |
| [ 3.008192] Console: switching to colour dummy device 80x25 |
| [ 3.008277] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013). |
| [ 3.008277] [drm] Driver supports precise vblank timestamp query. |
| [ 3.008286] resource sanity check: requesting [mem 0x000c0000-0x000dffff], which spans more than PCI Bus 0000:00 [mem 0x000c0000-0x000c3fff window] |
| [ 3.008289] caller pci_map_rom+0x58/0xe0 mapping multiple BARs |
| [ 3.008291] i915 0000:00:02.0: Invalid PCI ROM header signature: expecting 0xaa55, got 0xe599 |
| [ 3.008293] [drm] Failed to find VBIOS tables (VBT) |
| [ 3.008514] i915 0000:00:02.0: vgaarb: changed VGA decodes: olddecodes=io+mem,decodes=io+mem:owns=io+mem |
| [ 3.017766] [drm] Initialized i915 1.6.0 20171222 for 0000:00:02.0 on minor 0 |
| [ 3.017888] snd_hda_intel 0000:00:1b.0: bound 0000:00:02.0 (ops i915_audio_component_bind_ops [i915]) |
| [ 3.045743] fbcon: inteldrmfb (fb0) is primary device |
| [ 3.073786] intel_rapl: Found RAPL domain package |
| [ 3.073787] intel_rapl: Found RAPL domain core |
| [ 3.073788] intel_rapl: Found RAPL domain uncore |
| [ 3.114474] Console: switching to colour frame buffer device 240x67 |
| [ 3.135729] i915 0000:00:02.0: fb0: inteldrmfb frame buffer device |
| [ 3.165971] snd_hda_codec_realtek hdaudioC0D0: autoconfig for ALC887-VD: line_outs=4 (0x14/0x15/0x16/0x17/0x0) type:line |
| [ 3.165973] snd_hda_codec_realtek hdaudioC0D0: speaker_outs=0 (0x0/0x0/0x0/0x0/0x0) |
| [ 3.165975] snd_hda_codec_realtek hdaudioC0D0: hp_outs=1 (0x1b/0x0/0x0/0x0/0x0) |
| [ 3.165976] snd_hda_codec_realtek hdaudioC0D0: mono: mono_out=0x0 |
| [ 3.165977] snd_hda_codec_realtek hdaudioC0D0: dig-out=0x11/0x1e |
| [ 3.165978] snd_hda_codec_realtek hdaudioC0D0: inputs: |
| [ 3.165980] snd_hda_codec_realtek hdaudioC0D0: Front Mic=0x19 |
| [ 3.165981] snd_hda_codec_realtek hdaudioC0D0: Rear Mic=0x18 |
| [ 3.165983] snd_hda_codec_realtek hdaudioC0D0: Line=0x1a |
| [ 3.187046] input: HDA Intel PCH Front Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input8 |
| [ 3.188559] input: HDA Intel PCH Rear Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input9 |
| [ 3.188614] input: HDA Intel PCH Line as /devices/pci0000:00/0000:00:1b.0/sound/card0/input10 |
| [ 3.188657] input: HDA Intel PCH Line Out Front as /devices/pci0000:00/0000:00:1b.0/sound/card0/input11 |
| [ 3.188755] input: HDA Intel PCH Line Out Surround as /devices/pci0000:00/0000:00:1b.0/sound/card0/input12 |
| [ 3.188848] input: HDA Intel PCH Line Out CLFE as /devices/pci0000:00/0000:00:1b.0/sound/card0/input13 |
| [ 3.188924] input: HDA Intel PCH Line Out Side as /devices/pci0000:00/0000:00:1b.0/sound/card0/input14 |
| [ 3.188996] input: HDA Intel PCH Front Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card0/input15 |
| [ 3.189056] input: HDA Intel PCH HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:1b.0/sound/card0/input16 |
| [ 3.388350] IPv6: ADDRCONF(NETDEV_UP): enp4s0: link is not ready |
| [ 3.518168] r8169 0000:04:00.0 enp4s0: link down |
| [ 3.518182] r8169 0000:04:00.0 enp4s0: link down |
| [ 3.518252] IPv6: ADDRCONF(NETDEV_UP): enp4s0: link is not ready |
| [ 4.741183] fuse init (API version 7.26) |
| [ 5.048885] r8169 0000:04:00.0 enp4s0: link up |
| [ 5.048896] IPv6: ADDRCONF(NETDEV_CHANGE): enp4s0: link becomes ready |
| [ 7.271144] random: crng init done |
| [ 7.271146] random: 7 urandom warning(s) missed due to ratelimiting |