| [ 0.000000] Linux version 5.10.78-rt55-greebo-amdgpu (stefan@greebo) (gcc (GCC) 11.1.0, GNU ld (GNU Binutils) 2.36.1) #7 SMP PREEMPT_RT Tue Nov 16 00:56:55 CET 2021 |
| [ 0.000000] Command line: BOOT_IMAGE=/vmlinuz-5.10.78-rt55-greebo-amdgpu root=/dev/mapper/vg_greebo-parabola_root rw cryptdevice=/dev/disk/by-uuid/ca7da344-795a-4073-8e03-f8005f155cde:sda3_crypt quiet panic=5 console=ttyS0,115200n8 console=tty0 acpi_enforce_resources=lax radeon.si_support=0 amdgpu.si_support=1 amdgpu.dcfeaturemask=2 amdgpu.dc=1 |
| [ 0.000000] x86/fpu: Supporting XSAVE feature 0x001: 'x87 floating point registers' |
| [ 0.000000] x86/fpu: Supporting XSAVE feature 0x002: 'SSE registers' |
| [ 0.000000] x86/fpu: Enabled xstate features 0x3, context size is 576 bytes, using 'standard' format. |
| [ 0.000000] BIOS-provided physical RAM map: |
| [ 0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009fbff] usable |
| [ 0.000000] BIOS-e820: [mem 0x000000000009fc00-0x000000000009ffff] reserved |
| [ 0.000000] BIOS-e820: [mem 0x00000000000f0000-0x00000000000fffff] reserved |
| [ 0.000000] BIOS-e820: [mem 0x0000000000100000-0x000000007fb51fff] usable |
| [ 0.000000] BIOS-e820: [mem 0x000000007fb52000-0x000000007fffffff] reserved |
| [ 0.000000] BIOS-e820: [mem 0x00000000e0000000-0x00000000efffffff] reserved |
| [ 0.000000] BIOS-e820: [mem 0x00000000fed10000-0x00000000ffffffff] reserved |
| [ 0.000000] BIOS-e820: [mem 0x0000000100000000-0x000000037fffffff] usable |
| [ 0.000000] NX (Execute Disable) protection: active |
| [ 0.000000] SMBIOS 3.0 present. |
| [ 0.000000] DMI: ASUS P5Q/P5Q, BIOS 4.15 11/09/2021 |
| [ 0.000000] tsc: Fast TSC calibration using PIT |
| [ 0.000000] tsc: Detected 3332.694 MHz processor |
| [ 0.001077] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved |
| [ 0.001081] e820: remove [mem 0x000a0000-0x000fffff] usable |
| [ 0.001086] last_pfn = 0x380000 max_arch_pfn = 0x400000000 |
| [ 0.001091] MTRR default type: uncachable |
| [ 0.001092] MTRR fixed ranges enabled: |
| [ 0.001093] 00000-9FFFF write-back |
| [ 0.001094] A0000-BFFFF uncachable |
| [ 0.001096] C0000-FFFFF write-back |
| [ 0.001097] MTRR variable ranges enabled: |
| [ 0.001098] 0 base 000000000 mask F80000000 write-back |
| [ 0.001101] 1 base 07FC00000 mask FFFC00000 uncachable |
| [ 0.001103] 2 base 080000000 mask FF0000000 write-combining |
| [ 0.001105] 3 base 090000000 mask FFFE00000 write-combining |
| [ 0.001107] 4 base 100000000 mask F00000000 write-back |
| [ 0.001109] 5 base 200000000 mask E00000000 write-back |
| [ 0.001111] 6 disabled |
| [ 0.003863] x86/PAT: Configuration [0-7]: WB WC UC- UC WB WP UC- WT |
| [ 0.004233] last_pfn = 0x7fb52 max_arch_pfn = 0x400000000 |
| [ 0.004944] RAMDISK: [mem 0x361bb000-0x370d4fff] |
| [ 0.004948] ACPI: Early table checksum verification disabled |
| [ 0.004953] ACPI: RSDP 0x00000000000F6B90 000024 (v02 COREv4) |
| [ 0.004959] ACPI: XSDT 0x000000007FB5C0E0 00004C (v01 COREv4 COREBOOT 00000000 CORE 20210331) |
| [ 0.004966] ACPI: FACP 0x000000007FB5E100 000114 (v06 COREv4 COREBOOT 00000000 CORE 20210331) |
| [ 0.004973] ACPI: DSDT 0x000000007FB5C280 001E71 (v02 COREv4 COREBOOT 00000001 INTL 20210331) |
| [ 0.004978] ACPI: FACS 0x000000007FB5C240 000040 |
| [ 0.004982] ACPI: FACS 0x000000007FB5C240 000040 |
| [ 0.004985] ACPI: SSDT 0x000000007FB5E220 00054C (v02 COREv4 COREBOOT 0000002A CORE 20210331) |
| [ 0.004990] ACPI: MCFG 0x000000007FB5E770 00003C (v01 COREv4 COREBOOT 00000000 CORE 20210331) |
| [ 0.004994] ACPI: APIC 0x000000007FB5E7B0 000068 (v03 COREv4 COREBOOT 00000000 CORE 20210331) |
| [ 0.004998] ACPI: HPET 0x000000007FB5E820 000038 (v01 COREv4 COREBOOT 00000000 CORE 20210331) |
| [ 0.005002] ACPI: Reserving FACP table memory at [mem 0x7fb5e100-0x7fb5e213] |
| [ 0.005004] ACPI: Reserving DSDT table memory at [mem 0x7fb5c280-0x7fb5e0f0] |
| [ 0.005005] ACPI: Reserving FACS table memory at [mem 0x7fb5c240-0x7fb5c27f] |
| [ 0.005006] ACPI: Reserving FACS table memory at [mem 0x7fb5c240-0x7fb5c27f] |
| [ 0.005008] ACPI: Reserving SSDT table memory at [mem 0x7fb5e220-0x7fb5e76b] |
| [ 0.005009] ACPI: Reserving MCFG table memory at [mem 0x7fb5e770-0x7fb5e7ab] |
| [ 0.005010] ACPI: Reserving APIC table memory at [mem 0x7fb5e7b0-0x7fb5e817] |
| [ 0.005012] ACPI: Reserving HPET table memory at [mem 0x7fb5e820-0x7fb5e857] |
| [ 0.005023] ACPI: Local APIC address 0xfee00000 |
| [ 0.005054] Zone ranges: |
| [ 0.005055] DMA [mem 0x0000000000001000-0x0000000000ffffff] |
| [ 0.005058] DMA32 [mem 0x0000000001000000-0x00000000ffffffff] |
| [ 0.005060] Normal [mem 0x0000000100000000-0x000000037fffffff] |
| [ 0.005061] Movable zone start for each node |
| [ 0.005062] Early memory node ranges |
| [ 0.005063] node 0: [mem 0x0000000000001000-0x000000000009efff] |
| [ 0.005065] node 0: [mem 0x0000000000100000-0x000000007fb51fff] |
| [ 0.005066] node 0: [mem 0x0000000100000000-0x000000037fffffff] |
| [ 0.005069] Initmem setup node 0 [mem 0x0000000000001000-0x000000037fffffff] |
| [ 0.005071] On node 0 totalpages: 3144432 |
| [ 0.005073] DMA zone: 64 pages used for memmap |
| [ 0.005075] DMA zone: 21 pages reserved |
| [ 0.005076] DMA zone: 3998 pages, LIFO batch:0 |
| [ 0.005077] DMA32 zone: 8110 pages used for memmap |
| [ 0.005078] DMA32 zone: 518994 pages, LIFO batch:63 |
| [ 0.005080] Normal zone: 40960 pages used for memmap |
| [ 0.005081] Normal zone: 2621440 pages, LIFO batch:63 |
| [ 0.005086] On node 0, zone DMA: 1 pages in unavailable ranges |
| [ 0.005139] On node 0, zone DMA: 97 pages in unavailable ranges |
| [ 0.133445] On node 0, zone Normal: 1198 pages in unavailable ranges |
| [ 0.133617] ACPI: PM-Timer IO Port: 0x508 |
| [ 0.133620] ACPI: Local APIC address 0xfee00000 |
| [ 0.133628] ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1]) |
| [ 0.133630] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1]) |
| [ 0.133643] IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-23 |
| [ 0.133646] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 high edge) |
| [ 0.133649] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level) |
| [ 0.133652] ACPI: IRQ0 used by override. |
| [ 0.133653] ACPI: IRQ9 used by override. |
| [ 0.133656] Using ACPI (MADT) for SMP configuration information |
| [ 0.133658] ACPI: HPET id: 0x8086a301 base: 0xfed00000 |
| [ 0.133664] smpboot: Allowing 2 CPUs, 0 hotplug CPUs |
| [ 0.133685] [mem 0x80000000-0xdfffffff] available for PCI devices |
| [ 0.133690] clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 1910969940391419 ns |
| [ 0.143388] setup_percpu: NR_CPUS:4 nr_cpumask_bits:4 nr_cpu_ids:2 nr_node_ids:1 |
| [ 0.144525] percpu: Embedded 40 pages/cpu s124928 r8192 d30720 u1048576 |
| [ 0.144531] pcpu-alloc: s124928 r8192 d30720 u1048576 alloc=1*2097152 |
| [ 0.144535] pcpu-alloc: [0] 0 1 |
| [ 0.144557] Built 1 zonelists, mobility grouping on. Total pages: 3095277 |
| [ 0.144561] Kernel command line: BOOT_IMAGE=/vmlinuz-5.10.78-rt55-greebo-amdgpu root=/dev/mapper/vg_greebo-parabola_root rw cryptdevice=/dev/disk/by-uuid/ca7da344-795a-4073-8e03-f8005f155cde:sda3_crypt quiet panic=5 console=ttyS0,115200n8 console=tty0 acpi_enforce_resources=lax radeon.si_support=0 amdgpu.si_support=1 amdgpu.dcfeaturemask=2 amdgpu.dc=1 |
| [ 0.152577] Dentry cache hash table entries: 2097152 (order: 12, 16777216 bytes, linear) |
| [ 0.156846] Inode-cache hash table entries: 1048576 (order: 11, 8388608 bytes, linear) |
| [ 0.156895] mem auto-init: stack:off, heap alloc:off, heap free:off |
| [ 0.345104] Memory: 12243664K/12577728K available (14338K kernel code, 1050K rwdata, 6028K rodata, 900K init, 2432K bss, 333808K reserved, 0K cma-reserved) |
| [ 0.345115] random: get_random_u64 called from __kmem_cache_create+0x1b/0x3f0 with crng_init=0 |
| [ 0.345275] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=2, Nodes=1 |
| [ 0.345300] Kernel/User page tables isolation: enabled |
| [ 0.345399] rcu: Preemptible hierarchical RCU implementation. |
| [ 0.345401] rcu: RCU restricting CPUs from NR_CPUS=4 to nr_cpu_ids=2. |
| [ 0.345402] rcu: RCU priority boosting: priority 1 delay 500 ms. |
| [ 0.345403] rcu: RCU_SOFTIRQ processing moved to rcuc kthreads. |
| [ 0.345405] No expedited grace period (rcu_normal_after_boot). |
| [ 0.345406] Trampoline variant of Tasks RCU enabled. |
| [ 0.345407] rcu: RCU calculated value of scheduler-enlistment delay is 100 jiffies. |
| [ 0.345408] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=2 |
| [ 0.345421] NR_IRQS: 4352, nr_irqs: 440, preallocated irqs: 16 |
| [ 0.345770] spurious 8259A interrupt: IRQ7. |
| [ 0.349516] Console: colour VGA+ 80x25 |
| [ 0.349519] printk: console [tty0] enabled |
| [ 0.349542] printk: console [ttyS0] enabled |
| [ 0.349548] ACPI: Core revision 20200925 |
| [ 0.349628] clocksource: hpet: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 133484882848 ns |
| [ 0.349647] APIC: Switch to symmetric I/O mode setup |
| [ 0.350060] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=0 pin2=0 |
| [ 0.354647] clocksource: tsc-early: mask: 0xffffffffffffffff max_cycles: 0x3009f14ecd8, max_idle_ns: 440795255306 ns |
| [ 0.354656] Calibrating delay loop (skipped), value calculated using timer frequency.. 6665.38 BogoMIPS (lpj=3332694) |
| [ 0.354660] pid_max: default: 32768 minimum: 301 |
| [ 0.354838] Mount-cache hash table entries: 32768 (order: 6, 262144 bytes, linear) |
| [ 0.354963] Mountpoint-cache hash table entries: 32768 (order: 6, 262144 bytes, linear) |
| [ 0.355288] mce: CPU0: Thermal monitoring enabled (TM2) |
| [ 0.355293] process: using mwait in idle threads |
| [ 0.355298] Last level iTLB entries: 4KB 128, 2MB 4, 4MB 4 |
| [ 0.355300] Last level dTLB entries: 4KB 256, 2MB 0, 4MB 32, 1GB 0 |
| [ 0.355305] Spectre V1 : Mitigation: usercopy/swapgs barriers and __user pointer sanitization |
| [ 0.355309] Spectre V2 : Mitigation: Full generic retpoline |
| [ 0.355310] Spectre V2 : Spectre v2 / SpectreRSB mitigation: Filling RSB on context switch |
| [ 0.355311] Speculative Store Bypass: Vulnerable |
| [ 0.355314] MDS: Vulnerable: Clear CPU buffers attempted, no microcode |
| [ 0.355443] Freeing SMP alternatives memory: 36K |
| [ 0.457662] smpboot: CPU0: Intel(R) Core(TM)2 Duo CPU E8600 @ 3.33GHz (family: 0x6, model: 0x17, stepping: 0xa) |
| [ 0.457844] Performance Events: PEBS fmt0+, Core2 events, 4-deep LBR, Intel PMU driver. |
| [ 0.457855] ... version: 2 |
| [ 0.457857] ... bit width: 40 |
| [ 0.457858] ... generic registers: 2 |
| [ 0.457859] ... value mask: 000000ffffffffff |
| [ 0.457860] ... max period: 000000007fffffff |
| [ 0.457861] ... fixed-purpose events: 3 |
| [ 0.457862] ... event mask: 0000000700000003 |
| [ 0.458031] rcu: Hierarchical SRCU implementation. |
| [ 0.458194] smp: Bringing up secondary CPUs ... |
| [ 0.458349] x86: Booting SMP configuration: |
| [ 0.458351] .... node #0, CPUs: #1 |
| [ 0.460693] smp: Brought up 1 node, 2 CPUs |
| [ 0.460693] smpboot: Max logical packages: 1 |
| [ 0.460693] smpboot: Total of 2 processors activated (13330.77 BogoMIPS) |
| [ 0.462749] devtmpfs: initialized |
| [ 0.463019] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 1911260446275000 ns |
| [ 0.463019] futex hash table entries: 512 (order: 4, 65536 bytes, linear) |
| [ 0.463019] NET: Registered protocol family 16 |
| [ 0.463883] thermal_sys: Registered thermal governor 'step_wise' |
| [ 0.463902] cpuidle: using governor menu |
| [ 0.463902] ACPI: bus type PCI registered |
| [ 0.463902] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000) |
| [ 0.463902] PCI: MMCONFIG at [mem 0xe0000000-0xefffffff] reserved in E820 |
| [ 0.463902] PCI: Using configuration type 1 for base access |
| [ 0.469981] cryptd: max_cpu_qlen set to 1000 |
| [ 0.470814] ACPI: Added _OSI(Module Device) |
| [ 0.470814] ACPI: Added _OSI(Processor Device) |
| [ 0.470814] ACPI: Added _OSI(3.0 _SCP Extensions) |
| [ 0.470814] ACPI: Added _OSI(Processor Aggregator Device) |
| [ 0.470814] ACPI: Added _OSI(Linux-Dell-Video) |
| [ 0.470814] ACPI: Added _OSI(Linux-Lenovo-NV-HDMI-Audio) |
| [ 0.470814] ACPI: Added _OSI(Linux-HPI-Hybrid-Graphics) |
| [ 0.472214] ACPI: 2 ACPI AML tables successfully acquired and loaded |
| [ 0.473157] ACPI: Interpreter enabled |
| [ 0.473174] ACPI: (supports S0 S3 S5) |
| [ 0.473176] ACPI: Using IOAPIC for interrupt routing |
| [ 0.473206] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug |
| [ 0.478059] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff]) |
| [ 0.478067] acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI HPX-Type3] |
| [ 0.478124] acpi PNP0A08:00: _OSC: OS now controls [PME AER PCIeCapability LTR] |
| [ 0.478186] acpi PNP0A08:00: ignoring host bridge window [mem 0x000cc000-0x000cffff window] (conflicts with Video ROM [mem 0x000c0000-0x000cebff]) |
| [ 0.478231] PCI host bridge to bus 0000:00 |
| [ 0.478233] pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7 window] |
| [ 0.478236] pci_bus 0000:00: root bus resource [io 0x0d00-0xffff window] |
| [ 0.478238] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff window] |
| [ 0.478240] pci_bus 0000:00: root bus resource [mem 0x000c0000-0x000c3fff window] |
| [ 0.478242] pci_bus 0000:00: root bus resource [mem 0x000c4000-0x000c7fff window] |
| [ 0.478244] pci_bus 0000:00: root bus resource [mem 0x000c8000-0x000cbfff window] |
| [ 0.478246] pci_bus 0000:00: root bus resource [mem 0x000d0000-0x000d3fff window] |
| [ 0.478248] pci_bus 0000:00: root bus resource [mem 0x000d4000-0x000d7fff window] |
| [ 0.478250] pci_bus 0000:00: root bus resource [mem 0x000d8000-0x000dbfff window] |
| [ 0.478252] pci_bus 0000:00: root bus resource [mem 0x000dc000-0x000dffff window] |
| [ 0.478254] pci_bus 0000:00: root bus resource [mem 0x000e0000-0x000e3fff window] |
| [ 0.478256] pci_bus 0000:00: root bus resource [mem 0x000e4000-0x000e7fff window] |
| [ 0.478258] pci_bus 0000:00: root bus resource [mem 0x000e8000-0x000ebfff window] |
| [ 0.478259] pci_bus 0000:00: root bus resource [mem 0x000ec000-0x000effff window] |
| [ 0.478261] pci_bus 0000:00: root bus resource [mem 0x000f0000-0x000fffff window] |
| [ 0.478263] pci_bus 0000:00: root bus resource [mem 0x80000000-0xfebfffff window] |
| [ 0.478265] pci_bus 0000:00: root bus resource [mem 0xfed40000-0xfed44fff window] |
| [ 0.478268] pci_bus 0000:00: root bus resource [bus 00-ff] |
| [ 0.478283] pci 0000:00:00.0: [8086:2e20] type 00 class 0x060000 |
| [ 0.478435] pci 0000:00:01.0: [8086:2e21] type 01 class 0x060400 |
| [ 0.478479] pci 0000:00:01.0: PME# supported from D0 D3hot D3cold |
| [ 0.478642] pci 0000:00:1a.0: [8086:3a37] type 00 class 0x0c0300 |
| [ 0.478689] pci 0000:00:1a.0: reg 0x20: [io 0x4000-0x401f] |
| [ 0.478861] pci 0000:00:1a.1: [8086:3a38] type 00 class 0x0c0300 |
| [ 0.478901] pci 0000:00:1a.1: reg 0x20: [io 0x4020-0x403f] |
| [ 0.479064] pci 0000:00:1a.2: [8086:3a39] type 00 class 0x0c0300 |
| [ 0.479102] pci 0000:00:1a.2: reg 0x20: [io 0x4040-0x405f] |
| [ 0.479276] pci 0000:00:1a.7: [8086:3a3c] type 00 class 0x0c0320 |
| [ 0.479292] pci 0000:00:1a.7: reg 0x10: [mem 0x90605000-0x906053ff] |
| [ 0.479373] pci 0000:00:1a.7: PME# supported from D0 D3hot D3cold |
| [ 0.479513] pci 0000:00:1b.0: [8086:3a3e] type 00 class 0x040300 |
| [ 0.479530] pci 0000:00:1b.0: reg 0x10: [mem 0x90600000-0x90603fff 64bit] |
| [ 0.479604] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold |
| [ 0.479748] pci 0000:00:1c.0: [8086:3a40] type 01 class 0x060400 |
| [ 0.479822] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold |
| [ 0.479966] pci 0000:00:1c.1: [8086:3a42] type 01 class 0x060400 |
| [ 0.480039] pci 0000:00:1c.1: PME# supported from D0 D3hot D3cold |
| [ 0.480186] pci 0000:00:1c.4: [8086:3a48] type 01 class 0x060400 |
| [ 0.480263] pci 0000:00:1c.4: PME# supported from D0 D3hot D3cold |
| [ 0.480407] pci 0000:00:1c.5: [8086:3a4a] type 01 class 0x060400 |
| [ 0.480483] pci 0000:00:1c.5: PME# supported from D0 D3hot D3cold |
| [ 0.480631] pci 0000:00:1d.0: [8086:3a34] type 00 class 0x0c0300 |
| [ 0.480677] pci 0000:00:1d.0: reg 0x20: [io 0x4060-0x407f] |
| [ 0.480842] pci 0000:00:1d.1: [8086:3a35] type 00 class 0x0c0300 |
| [ 0.480880] pci 0000:00:1d.1: reg 0x20: [io 0x4080-0x409f] |
| [ 0.481044] pci 0000:00:1d.2: [8086:3a36] type 00 class 0x0c0300 |
| [ 0.481082] pci 0000:00:1d.2: reg 0x20: [io 0x40a0-0x40bf] |
| [ 0.481257] pci 0000:00:1d.7: [8086:3a3a] type 00 class 0x0c0320 |
| [ 0.481274] pci 0000:00:1d.7: reg 0x10: [mem 0x90606000-0x906063ff] |
| [ 0.481355] pci 0000:00:1d.7: PME# supported from D0 D3hot D3cold |
| [ 0.481489] pci 0000:00:1e.0: [8086:244e] type 01 class 0x060401 |
| [ 0.481665] pci 0000:00:1f.0: [8086:3a16] type 00 class 0x060100 |
| [ 0.481742] pci 0000:00:1f.0: quirk: [io 0x0500-0x057f] claimed by ICH6 ACPI/GPIO/TCO |
| [ 0.481747] pci 0000:00:1f.0: quirk: [io 0x0580-0x05bf] claimed by ICH6 GPIO |
| [ 0.481751] pci 0000:00:1f.0: ICH7 LPC Generic IO decode 1 PIO at 0294 (mask 0003) |
| [ 0.481756] pci 0000:00:1f.0: ICH7 LPC Generic IO decode 2 PIO at 4700 (mask 001f) |
| [ 0.481909] pci 0000:00:1f.2: [8086:3a22] type 00 class 0x010601 |
| [ 0.481922] pci 0000:00:1f.2: reg 0x10: [io 0x40e0-0x40e7] |
| [ 0.481930] pci 0000:00:1f.2: reg 0x14: [io 0x40f0-0x40f3] |
| [ 0.481938] pci 0000:00:1f.2: reg 0x18: [io 0x40e8-0x40ef] |
| [ 0.481946] pci 0000:00:1f.2: reg 0x1c: [io 0x40f4-0x40f7] |
| [ 0.481953] pci 0000:00:1f.2: reg 0x20: [io 0x40c0-0x40df] |
| [ 0.481961] pci 0000:00:1f.2: reg 0x24: [mem 0x90604000-0x906047ff] |
| [ 0.482002] pci 0000:00:1f.2: PME# supported from D3hot |
| [ 0.482132] pci 0000:00:1f.3: [8086:3a30] type 00 class 0x0c0500 |
| [ 0.482149] pci 0000:00:1f.3: reg 0x10: [mem 0x90607000-0x906070ff 64bit] |
| [ 0.482169] pci 0000:00:1f.3: reg 0x20: [io 0x0400-0x041f] |
| [ 0.482358] pci 0000:01:00.0: [1002:6995] type 00 class 0x030000 |
| [ 0.482379] pci 0000:01:00.0: reg 0x10: [mem 0x80000000-0x8fffffff 64bit pref] |
| [ 0.482393] pci 0000:01:00.0: reg 0x18: [mem 0x90000000-0x901fffff 64bit pref] |
| [ 0.482403] pci 0000:01:00.0: reg 0x20: [io 0x1000-0x10ff] |
| [ 0.482413] pci 0000:01:00.0: reg 0x24: [mem 0x90200000-0x9023ffff] |
| [ 0.482422] pci 0000:01:00.0: reg 0x30: [mem 0x90240000-0x9025ffff pref] |
| [ 0.482430] pci 0000:01:00.0: enabling Extended Tags |
| [ 0.482518] pci 0000:01:00.0: supports D1 D2 |
| [ 0.482520] pci 0000:01:00.0: PME# supported from D1 D2 D3hot D3cold |
| [ 0.482550] pci 0000:01:00.0: 16.000 Gb/s available PCIe bandwidth, limited by 2.5 GT/s PCIe x8 link at 0000:00:01.0 (capable of 63.008 Gb/s with 8.0 GT/s PCIe x8 link) |
| [ 0.482628] pci 0000:01:00.1: [1002:aae0] type 00 class 0x040300 |
| [ 0.482652] pci 0000:01:00.1: reg 0x10: [mem 0x90260000-0x90263fff 64bit] |
| [ 0.482697] pci 0000:01:00.1: enabling Extended Tags |
| [ 0.482759] pci 0000:01:00.1: supports D1 D2 |
| [ 0.482871] pci 0000:00:01.0: PCI bridge to [bus 01] |
| [ 0.482874] pci 0000:00:01.0: bridge window [io 0x1000-0x1fff] |
| [ 0.482877] pci 0000:00:01.0: bridge window [mem 0x90200000-0x902fffff] |
| [ 0.482881] pci 0000:00:01.0: bridge window [mem 0x80000000-0x901fffff 64bit pref] |
| [ 0.482926] pci 0000:00:1c.0: PCI bridge to [bus 02] |
| [ 0.482975] pci 0000:00:1c.1: PCI bridge to [bus 03] |
| [ 0.483044] pci 0000:04:00.0: [11ab:6121] type 00 class 0x01018f |
| [ 0.483065] pci 0000:04:00.0: reg 0x10: [io 0x2010-0x2017] |
| [ 0.483077] pci 0000:04:00.0: reg 0x14: [io 0x2020-0x2023] |
| [ 0.483089] pci 0000:04:00.0: reg 0x18: [io 0x2018-0x201f] |
| [ 0.483100] pci 0000:04:00.0: reg 0x1c: [io 0x2024-0x2027] |
| [ 0.483111] pci 0000:04:00.0: reg 0x20: [io 0x2000-0x200f] |
| [ 0.483123] pci 0000:04:00.0: reg 0x24: [mem 0x90300000-0x903003ff] |
| [ 0.483197] pci 0000:04:00.0: supports D1 |
| [ 0.483199] pci 0000:04:00.0: PME# supported from D0 D1 D3hot |
| [ 0.483284] pci 0000:04:00.0: disabling ASPM on pre-1.1 PCIe device. You can enable it with 'pcie_aspm=force' |
| [ 0.483294] pci 0000:00:1c.4: PCI bridge to [bus 04] |
| [ 0.483298] pci 0000:00:1c.4: bridge window [io 0x2000-0x2fff] |
| [ 0.483302] pci 0000:00:1c.4: bridge window [mem 0x90300000-0x903fffff] |
| [ 0.483371] pci 0000:05:00.0: [1969:1026] type 00 class 0x020000 |
| [ 0.483398] pci 0000:05:00.0: reg 0x10: [mem 0x90400000-0x9043ffff 64bit] |
| [ 0.483411] pci 0000:05:00.0: reg 0x18: [io 0x3000-0x307f] |
| [ 0.483520] pci 0000:05:00.0: PME# supported from D3hot D3cold |
| [ 0.483607] pci 0000:05:00.0: disabling ASPM on pre-1.1 PCIe device. You can enable it with 'pcie_aspm=force' |
| [ 0.483618] pci 0000:00:1c.5: PCI bridge to [bus 05] |
| [ 0.483622] pci 0000:00:1c.5: bridge window [io 0x3000-0x3fff] |
| [ 0.483626] pci 0000:00:1c.5: bridge window [mem 0x90400000-0x904fffff] |
| [ 0.483646] pci_bus 0000:06: extended config space not accessible |
| [ 0.483681] pci 0000:06:01.0: [1102:0002] type 00 class 0x040100 |
| [ 0.483697] pci 0000:06:01.0: reg 0x10: [io 0x5100-0x511f] |
| [ 0.483769] pci 0000:06:01.0: supports D1 D2 |
| [ 0.483867] pci 0000:06:01.1: [1102:7002] type 00 class 0x098000 |
| [ 0.483884] pci 0000:06:01.1: reg 0x10: [io 0x5120-0x5127] |
| [ 0.483957] pci 0000:06:01.1: supports D1 D2 |
| [ 0.484031] pci 0000:06:02.0: [9004:5078] type 00 class 0x010000 |
| [ 0.484048] pci 0000:06:02.0: reg 0x10: [io 0x5000-0x50ff] |
| [ 0.484058] pci 0000:06:02.0: reg 0x14: [mem 0x90500000-0x90500fff] |
| [ 0.484218] pci 0000:06:03.0: [11c1:5811] type 00 class 0x0c0010 |
| [ 0.484235] pci 0000:06:03.0: reg 0x10: [mem 0x90501000-0x90501fff] |
| [ 0.484307] pci 0000:06:03.0: supports D1 D2 |
| [ 0.484309] pci 0000:06:03.0: PME# supported from D0 D1 D2 D3hot |
| [ 0.484414] pci 0000:00:1e.0: PCI bridge to [bus 06] (subtractive decode) |
| [ 0.484419] pci 0000:00:1e.0: bridge window [io 0x5000-0x5fff] |
| [ 0.484423] pci 0000:00:1e.0: bridge window [mem 0x90500000-0x905fffff] |
| [ 0.484428] pci 0000:00:1e.0: bridge window [io 0x0000-0x0cf7 window] (subtractive decode) |
| [ 0.484431] pci 0000:00:1e.0: bridge window [io 0x0d00-0xffff window] (subtractive decode) |
| [ 0.484433] pci 0000:00:1e.0: bridge window [mem 0x000a0000-0x000bffff window] (subtractive decode) |
| [ 0.484435] pci 0000:00:1e.0: bridge window [mem 0x000c0000-0x000c3fff window] (subtractive decode) |
| [ 0.484437] pci 0000:00:1e.0: bridge window [mem 0x000c4000-0x000c7fff window] (subtractive decode) |
| [ 0.484440] pci 0000:00:1e.0: bridge window [mem 0x000c8000-0x000cbfff window] (subtractive decode) |
| [ 0.484442] pci 0000:00:1e.0: bridge window [mem 0x000d0000-0x000d3fff window] (subtractive decode) |
| [ 0.484444] pci 0000:00:1e.0: bridge window [mem 0x000d4000-0x000d7fff window] (subtractive decode) |
| [ 0.484446] pci 0000:00:1e.0: bridge window [mem 0x000d8000-0x000dbfff window] (subtractive decode) |
| [ 0.484449] pci 0000:00:1e.0: bridge window [mem 0x000dc000-0x000dffff window] (subtractive decode) |
| [ 0.484451] pci 0000:00:1e.0: bridge window [mem 0x000e0000-0x000e3fff window] (subtractive decode) |
| [ 0.484453] pci 0000:00:1e.0: bridge window [mem 0x000e4000-0x000e7fff window] (subtractive decode) |
| [ 0.484455] pci 0000:00:1e.0: bridge window [mem 0x000e8000-0x000ebfff window] (subtractive decode) |
| [ 0.484457] pci 0000:00:1e.0: bridge window [mem 0x000ec000-0x000effff window] (subtractive decode) |
| [ 0.484460] pci 0000:00:1e.0: bridge window [mem 0x000f0000-0x000fffff window] (subtractive decode) |
| [ 0.484462] pci 0000:00:1e.0: bridge window [mem 0x80000000-0xfebfffff window] (subtractive decode) |
| [ 0.484464] pci 0000:00:1e.0: bridge window [mem 0xfed40000-0xfed44fff window] (subtractive decode) |
| [ 0.484491] pci_bus 0000:00: on NUMA node 0 |
| [ 0.484659] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 10 *11 12 14 15) |
| [ 0.484730] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 10 *11 12 14 15) |
| [ 0.484799] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 7 10 *11 12 14 15) |
| [ 0.484867] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 10 *11 12 14 15) |
| [ 0.484937] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 10 *11 12 14 15) |
| [ 0.485004] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 10 *11 12 14 15) |
| [ 0.485071] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 7 10 *11 12 14 15) |
| [ 0.485138] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 7 10 *11 12 14 15) |
| [ 0.485565] SCSI subsystem initialized |
| [ 0.485573] libata version 3.00 loaded. |
| [ 0.485573] ACPI: bus type USB registered |
| [ 0.485573] usbcore: registered new interface driver usbfs |
| [ 0.485573] usbcore: registered new interface driver hub |
| [ 0.485573] usbcore: registered new device driver usb |
| [ 0.485701] Advanced Linux Sound Architecture Driver Initialized. |
| [ 0.485841] PCI: Using ACPI for IRQ routing |
| [ 0.491506] PCI: pci_cache_line_size set to 64 bytes |
| [ 0.491586] e820: reserve RAM buffer [mem 0x0009fc00-0x0009ffff] |
| [ 0.491589] e820: reserve RAM buffer [mem 0x7fb52000-0x7fffffff] |
| [ 0.491595] hpet: 4 channels of 0 reserved for per-cpu timers |
| [ 0.491595] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0 |
| [ 0.491595] hpet0: 4 comparators, 64-bit 14.318180 MHz counter |
| [ 0.493671] clocksource: Switched to clocksource tsc-early |
| [ 0.493748] pnp: PnP ACPI init |
| [ 0.493845] system 00:00: [mem 0xfed1c000-0xfed1ffff] has been reserved |
| [ 0.493849] system 00:00: [mem 0xfed14000-0xfed17fff] has been reserved |
| [ 0.493852] system 00:00: [mem 0xfed18000-0xfed18fff] has been reserved |
| [ 0.493855] system 00:00: [mem 0xfed19000-0xfed19fff] has been reserved |
| [ 0.493858] system 00:00: [mem 0xe0000000-0xefffffff] has been reserved |
| [ 0.493860] system 00:00: [mem 0xfed20000-0xfed3ffff] has been reserved |
| [ 0.493863] system 00:00: [mem 0xfed40000-0xfed44fff] has been reserved |
| [ 0.493866] system 00:00: [mem 0xfed45000-0xfed8ffff] has been reserved |
| [ 0.493873] system 00:00: Plug and Play ACPI device, IDs PNP0c02 (active) |
| [ 0.494157] system 00:01: [mem 0xfed00000-0xfed003ff] has been reserved |
| [ 0.494165] system 00:01: Plug and Play ACPI device, IDs PNP0103 PNP0c01 (active) |
| [ 0.494243] system 00:02: [io 0x0800-0x080f] has been reserved |
| [ 0.494247] system 00:02: [io 0x0500-0x057f] has been reserved |
| [ 0.494249] system 00:02: [io 0x0580-0x05bf] has been reserved |
| [ 0.494256] system 00:02: Plug and Play ACPI device, IDs PNP0c02 (active) |
| [ 0.494285] pnp 00:03: Plug and Play ACPI device, IDs PNP0b00 (active) |
| [ 0.494328] pnp 00:04: Plug and Play ACPI device, IDs PNP0303 PNP030b (active) |
| [ 0.494367] pnp 00:05: Plug and Play ACPI device, IDs PNP0f13 (active) |
| [ 0.494392] pnp: PnP ACPI: found 6 devices |
| [ 0.500906] clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns |
| [ 0.500948] NET: Registered protocol family 2 |
| [ 0.501390] IP idents hash table entries: 262144 (order: 9, 2097152 bytes, linear) |
| [ 0.504418] tcp_listen_portaddr_hash hash table entries: 8192 (order: 7, 524288 bytes, linear) |
| [ 0.504586] TCP established hash table entries: 131072 (order: 8, 1048576 bytes, linear) |
| [ 0.505003] TCP bind hash table entries: 65536 (order: 9, 3670016 bytes, linear) |
| [ 0.506689] TCP: Hash tables configured (established 131072 bind 65536) |
| [ 0.506798] UDP hash table entries: 8192 (order: 8, 1048576 bytes, linear) |
| [ 0.507410] UDP-Lite hash table entries: 8192 (order: 8, 1048576 bytes, linear) |
| [ 0.508111] NET: Registered protocol family 1 |
| [ 0.508316] RPC: Registered named UNIX socket transport module. |
| [ 0.508318] RPC: Registered udp transport module. |
| [ 0.508319] RPC: Registered tcp transport module. |
| [ 0.508320] RPC: Registered tcp NFSv4.1 backchannel transport module. |
| [ 0.508361] pci 0000:00:01.0: PCI bridge to [bus 01] |
| [ 0.508367] pci 0000:00:01.0: bridge window [io 0x1000-0x1fff] |
| [ 0.508373] pci 0000:00:01.0: bridge window [mem 0x90200000-0x902fffff] |
| [ 0.508376] pci 0000:00:01.0: bridge window [mem 0x80000000-0x901fffff 64bit pref] |
| [ 0.508380] pci 0000:00:1c.0: PCI bridge to [bus 02] |
| [ 0.508390] pci 0000:00:1c.1: PCI bridge to [bus 03] |
| [ 0.508400] pci 0000:00:1c.4: PCI bridge to [bus 04] |
| [ 0.508403] pci 0000:00:1c.4: bridge window [io 0x2000-0x2fff] |
| [ 0.508407] pci 0000:00:1c.4: bridge window [mem 0x90300000-0x903fffff] |
| [ 0.508414] pci 0000:00:1c.5: PCI bridge to [bus 05] |
| [ 0.508417] pci 0000:00:1c.5: bridge window [io 0x3000-0x3fff] |
| [ 0.508421] pci 0000:00:1c.5: bridge window [mem 0x90400000-0x904fffff] |
| [ 0.508429] pci 0000:00:1e.0: PCI bridge to [bus 06] |
| [ 0.508432] pci 0000:00:1e.0: bridge window [io 0x5000-0x5fff] |
| [ 0.508437] pci 0000:00:1e.0: bridge window [mem 0x90500000-0x905fffff] |
| [ 0.508445] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7 window] |
| [ 0.508447] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff window] |
| [ 0.508449] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff window] |
| [ 0.508451] pci_bus 0000:00: resource 7 [mem 0x000c0000-0x000c3fff window] |
| [ 0.508453] pci_bus 0000:00: resource 8 [mem 0x000c4000-0x000c7fff window] |
| [ 0.508455] pci_bus 0000:00: resource 9 [mem 0x000c8000-0x000cbfff window] |
| [ 0.508457] pci_bus 0000:00: resource 10 [mem 0x000d0000-0x000d3fff window] |
| [ 0.508459] pci_bus 0000:00: resource 11 [mem 0x000d4000-0x000d7fff window] |
| [ 0.508462] pci_bus 0000:00: resource 12 [mem 0x000d8000-0x000dbfff window] |
| [ 0.508464] pci_bus 0000:00: resource 13 [mem 0x000dc000-0x000dffff window] |
| [ 0.508466] pci_bus 0000:00: resource 14 [mem 0x000e0000-0x000e3fff window] |
| [ 0.508468] pci_bus 0000:00: resource 15 [mem 0x000e4000-0x000e7fff window] |
| [ 0.508470] pci_bus 0000:00: resource 16 [mem 0x000e8000-0x000ebfff window] |
| [ 0.508472] pci_bus 0000:00: resource 17 [mem 0x000ec000-0x000effff window] |
| [ 0.508474] pci_bus 0000:00: resource 18 [mem 0x000f0000-0x000fffff window] |
| [ 0.508476] pci_bus 0000:00: resource 19 [mem 0x80000000-0xfebfffff window] |
| [ 0.508478] pci_bus 0000:00: resource 20 [mem 0xfed40000-0xfed44fff window] |
| [ 0.508480] pci_bus 0000:01: resource 0 [io 0x1000-0x1fff] |
| [ 0.508482] pci_bus 0000:01: resource 1 [mem 0x90200000-0x902fffff] |
| [ 0.508484] pci_bus 0000:01: resource 2 [mem 0x80000000-0x901fffff 64bit pref] |
| [ 0.508487] pci_bus 0000:04: resource 0 [io 0x2000-0x2fff] |
| [ 0.508489] pci_bus 0000:04: resource 1 [mem 0x90300000-0x903fffff] |
| [ 0.508492] pci_bus 0000:05: resource 0 [io 0x3000-0x3fff] |
| [ 0.508494] pci_bus 0000:05: resource 1 [mem 0x90400000-0x904fffff] |
| [ 0.508496] pci_bus 0000:06: resource 0 [io 0x5000-0x5fff] |
| [ 0.508498] pci_bus 0000:06: resource 1 [mem 0x90500000-0x905fffff] |
| [ 0.508500] pci_bus 0000:06: resource 4 [io 0x0000-0x0cf7 window] |
| [ 0.508502] pci_bus 0000:06: resource 5 [io 0x0d00-0xffff window] |
| [ 0.508504] pci_bus 0000:06: resource 6 [mem 0x000a0000-0x000bffff window] |
| [ 0.508506] pci_bus 0000:06: resource 7 [mem 0x000c0000-0x000c3fff window] |
| [ 0.508508] pci_bus 0000:06: resource 8 [mem 0x000c4000-0x000c7fff window] |
| [ 0.508510] pci_bus 0000:06: resource 9 [mem 0x000c8000-0x000cbfff window] |
| [ 0.508512] pci_bus 0000:06: resource 10 [mem 0x000d0000-0x000d3fff window] |
| [ 0.508514] pci_bus 0000:06: resource 11 [mem 0x000d4000-0x000d7fff window] |
| [ 0.508516] pci_bus 0000:06: resource 12 [mem 0x000d8000-0x000dbfff window] |
| [ 0.508518] pci_bus 0000:06: resource 13 [mem 0x000dc000-0x000dffff window] |
| [ 0.508520] pci_bus 0000:06: resource 14 [mem 0x000e0000-0x000e3fff window] |
| [ 0.508522] pci_bus 0000:06: resource 15 [mem 0x000e4000-0x000e7fff window] |
| [ 0.508524] pci_bus 0000:06: resource 16 [mem 0x000e8000-0x000ebfff window] |
| [ 0.508526] pci_bus 0000:06: resource 17 [mem 0x000ec000-0x000effff window] |
| [ 0.508528] pci_bus 0000:06: resource 18 [mem 0x000f0000-0x000fffff window] |
| [ 0.508530] pci_bus 0000:06: resource 19 [mem 0x80000000-0xfebfffff window] |
| [ 0.508532] pci_bus 0000:06: resource 20 [mem 0xfed40000-0xfed44fff window] |
| [ 0.510345] pci 0000:01:00.0: Video device with shadowed ROM at [mem 0x000c0000-0x000dffff] |
| [ 0.510394] pci 0000:01:00.1: D0 power state depends on 0000:01:00.0 |
| [ 0.510468] PCI: CLS 64 bytes, default 64 |
| [ 0.510538] Unpacking initramfs... |
| [ 0.714093] Freeing initrd memory: 15464K |
| [ 0.714107] PCI-DMA: Using software bounce buffering for IO (SWIOTLB) |
| [ 0.714108] software IO TLB: mapped [mem 0x000000007bb52000-0x000000007fb52000] (64MB) |
| [ 0.714810] workingset: timestamp_bits=62 max_order=22 bucket_order=0 |
| [ 0.717878] NFS: Registering the id_resolver key type |
| [ 0.717887] Key type id_resolver registered |
| [ 0.717889] Key type id_legacy registered |
| [ 0.717902] ntfs: driver 2.1.32 [Flags: R/W]. |
| [ 0.718069] SGI XFS with security attributes, no debug enabled |
| [ 0.732192] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 251) |
| [ 0.732195] io scheduler mq-deadline registered |
| [ 0.732543] pcieport 0000:00:01.0: PME: Signaling with IRQ 24 |
| [ 0.732833] pcieport 0000:00:1c.0: PME: Signaling with IRQ 25 |
| [ 0.733110] pcieport 0000:00:1c.1: PME: Signaling with IRQ 26 |
| [ 0.733361] pcieport 0000:00:1c.4: PME: Signaling with IRQ 27 |
| [ 0.733616] pcieport 0000:00:1c.5: PME: Signaling with IRQ 28 |
| [ 0.733877] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input0 |
| [ 0.736554] ACPI: Power Button [PWRF] |
| [ 0.736630] tsc: Marking TSC unstable due to TSC halts in idle |
| [ 0.736682] clocksource: Switched to clocksource hpet |
| [ 0.736939] Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled |
| [ 0.737047] serial8250: ttyS0 at I/O 0x3f8 (irq = 4, base_baud = 115200) is a 16550A |
| [ 0.737627] [drm] amdgpu kernel modesetting enabled. |
| [ 0.737785] [drm] initializing kernel modesetting (POLARIS12 0x1002:0x6995 0x1028:0x0B0C 0x00). |
| [ 0.737791] amdgpu 0000:01:00.0: amdgpu: Trusted Memory Zone (TMZ) feature not supported |
| [ 0.737799] [drm] register mmio base: 0x90200000 |
| [ 0.737800] [drm] register mmio size: 262144 |
| [ 0.737803] [drm] PCIE atomic ops is not supported |
| [ 0.737809] [drm] add ip block number 0 <vi_common> |
| [ 0.737811] [drm] add ip block number 1 <gmc_v8_0> |
| [ 0.737813] [drm] add ip block number 2 <tonga_ih> |
| [ 0.737814] [drm] add ip block number 3 <gfx_v8_0> |
| [ 0.737815] [drm] add ip block number 4 <sdma_v3_0> |
| [ 0.737817] [drm] add ip block number 5 <powerplay> |
| [ 0.737818] [drm] add ip block number 6 <dm> |
| [ 0.737819] [drm] add ip block number 7 <uvd_v6_0> |
| [ 0.737821] [drm] add ip block number 8 <vce_v3_0> |
| [ 0.738070] resource sanity check: requesting [mem 0x000c0000-0x000dffff], which spans more than PCI Bus 0000:00 [mem 0x000c0000-0x000c3fff window] |
| [ 0.738074] caller pci_map_rom+0x79/0x1d0 mapping multiple BARs |
| [ 0.738083] amdgpu 0000:01:00.0: No more image in the PCI ROM |
| [ 0.738148] amdgpu 0000:01:00.0: amdgpu: Fetched VBIOS from ROM BAR |
| [ 0.738151] amdgpu: ATOM BIOS: 113-D0910602-101 |
| [ 0.738179] [drm] UVD is enabled in VM mode |
| [ 0.738180] [drm] UVD ENC is enabled in VM mode |
| [ 0.738182] [drm] VCE enabled in VM mode |
| [ 0.738219] [drm] vm size is 64 GB, 2 levels, block size is 10-bit, fragment size is 9-bit |
| [ 0.738232] amdgpu 0000:01:00.0: amdgpu: VRAM: 2048M 0x000000F400000000 - 0x000000F47FFFFFFF (2048M used) |
| [ 0.738236] amdgpu 0000:01:00.0: amdgpu: GART: 256M 0x000000FF00000000 - 0x000000FF0FFFFFFF |
| [ 0.738242] [drm] Detected VRAM RAM=2048M, BAR=256M |
| [ 0.738243] [drm] RAM width 64bits GDDR5 |
| [ 0.738305] [TTM] Zone kernel: Available graphics memory: 6129710 KiB |
| [ 0.738308] [TTM] Zone dma32: Available graphics memory: 2097152 KiB |
| [ 0.738309] [TTM] Initializing pool allocator |
| [ 0.738314] [TTM] Initializing DMA pool allocator |
| [ 0.738368] [drm] amdgpu: 2048M of VRAM memory ready |
| [ 0.738372] [drm] amdgpu: 3072M of GTT memory ready. |
| [ 0.738375] [drm] GART: num cpu pages 65536, num gpu pages 65536 |
| [ 0.738889] [drm] PCIE GART of 256M enabled (table at 0x000000F400900000). |
| [ 0.739024] [drm] Chained IB support enabled! |
| [ 0.740438] amdgpu: hwmgr_sw_init smu backed is polaris10_smu |
| [ 0.740450] [drm] Found UVD firmware Version: 1.130 Family ID: 16 |
| [ 0.741628] [drm] Found VCE firmware Version: 53.26 Binary ID: 3 |
| [ 0.824714] [drm] Display Core initialized with v3.2.104! |
| [ 1.025387] [drm] UVD and UVD ENC initialized successfully. |
| [ 1.136237] [drm] VCE initialized successfully. |
| [ 1.136241] amdgpu 0000:01:00.0: amdgpu: SE 2, SH per SE 1, CU per SH 5, active_cu_number 8 |
| [ 1.138510] [drm] fb mappable at 0x80E30000 |
| [ 1.138512] [drm] vram apper at 0x80000000 |
| [ 1.138513] [drm] size 7680000 |
| [ 1.138514] [drm] fb depth is 24 |
| [ 1.138515] [drm] pitch is 6400 |
| [ 1.138593] fbcon: amdgpudrmfb (fb0) is primary device |
| [ 1.266177] Console: switching to colour frame buffer device 200x75 |
| [ 1.282791] amdgpu 0000:01:00.0: [drm] fb0: amdgpudrmfb frame buffer device |
| [ 1.283621] [drm] Initialized amdgpu 3.40.0 20150101 for 0000:01:00.0 on minor 0 |
| [ 1.285518] loop: module loaded |
| [ 1.285606] ACPI Warning: SystemIO range 0x0000000000000528-0x000000000000052F conflicts with OpRegion 0x0000000000000500-0x000000000000057F (\PMIO) (20200925/utaddress-204) |
| [ 1.285612] ACPI: This conflict may cause random problems and system instability |
| [ 1.285613] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver |
| [ 1.285619] ACPI Warning: SystemIO range 0x00000000000005B0-0x00000000000005BF conflicts with OpRegion 0x0000000000000580-0x00000000000005BB (\GPIO) (20200925/utaddress-204) |
| [ 1.285623] ACPI: This conflict may cause random problems and system instability |
| [ 1.285624] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver |
| [ 1.285626] ACPI Warning: SystemIO range 0x0000000000000580-0x00000000000005AF conflicts with OpRegion 0x0000000000000580-0x00000000000005BB (\GPIO) (20200925/utaddress-204) |
| [ 1.285630] ACPI: This conflict may cause random problems and system instability |
| [ 1.285631] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver |
| [ 1.285873] gpio_ich gpio_ich.1.auto: GPIO from 451 to 511 |
| [ 1.287211] ahc_pci:6:2:0: Host Adapter Bios disabled. Using default SCSI device parameters |
| [ 5.160142] random: fast init done |
| [ 6.460716] scsi host0: Adaptec AIC7XXX EISA/VLB/PCI SCSI HBA DRIVER, Rev 7.0 |
| <Adaptec 2902/04/10/15/20C/30C SCSI adapter> |
| aic7850: Single Channel A, SCSI Id=7, 3/253 SCBs |
| |
| [ 8.299038] ahci 0000:00:1f.2: version 3.0 |
| [ 8.299239] ahci 0000:00:1f.2: SSS flag set, parallel bus scan disabled |
| [ 8.299276] ahci 0000:00:1f.2: AHCI 0001.0200 32 slots 6 ports 3 Gbps 0x3f impl SATA mode |
| [ 8.299281] ahci 0000:00:1f.2: flags: 64bit ncq sntf ilck stag pm led clo pio slum part ccc |
| [ 8.300316] scsi host1: ahci |
| [ 8.300512] scsi host2: ahci |
| [ 8.300702] scsi host3: ahci |
| [ 8.300875] scsi host4: ahci |
| [ 8.301048] scsi host5: ahci |
| [ 8.301223] scsi host6: ahci |
| [ 8.301304] ata1: SATA max UDMA/133 abar m2048@0x90604000 port 0x90604100 irq 30 |
| [ 8.301308] ata2: SATA max UDMA/133 abar m2048@0x90604000 port 0x90604180 irq 30 |
| [ 8.301310] ata3: SATA max UDMA/133 abar m2048@0x90604000 port 0x90604200 irq 30 |
| [ 8.301313] ata4: SATA max UDMA/133 abar m2048@0x90604000 port 0x90604280 irq 30 |
| [ 8.301315] ata5: SATA max UDMA/133 abar m2048@0x90604000 port 0x90604300 irq 30 |
| [ 8.301317] ata6: SATA max UDMA/133 abar m2048@0x90604000 port 0x90604380 irq 30 |
| [ 8.302099] scsi host7: pata_marvell |
| [ 8.302258] scsi host8: pata_marvell |
| [ 8.302314] ata7: PATA max UDMA/100 cmd 0x2010 ctl 0x2020 bmdma 0x2000 irq 16 |
| [ 8.302317] ata8: PATA max UDMA/133 cmd 0x2018 ctl 0x2024 bmdma 0x2008 irq 16 |
| [ 8.370696] firewire_ohci 0000:06:03.0: added OHCI v1.0 device as card 0, 8 IR + 8 IT contexts, quirks 0x0 |
| [ 8.370726] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver |
| [ 8.370728] ehci-pci: EHCI PCI platform driver |
| [ 8.370870] ehci-pci 0000:00:1a.7: EHCI Host Controller |
| [ 8.370881] ehci-pci 0000:00:1a.7: new USB bus registered, assigned bus number 1 |
| [ 8.370895] ehci-pci 0000:00:1a.7: debug port 1 |
| [ 8.374796] ehci-pci 0000:00:1a.7: cache line size of 64 is not supported |
| [ 8.374849] ehci-pci 0000:00:1a.7: irq 18, io mem 0x90605000 |
| [ 8.381673] ehci-pci 0000:00:1a.7: USB 2.0 started, EHCI 1.00 |
| [ 8.381746] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 5.10 |
| [ 8.381750] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 |
| [ 8.381752] usb usb1: Product: EHCI Host Controller |
| [ 8.381754] usb usb1: Manufacturer: Linux 5.10.78-rt55-greebo-amdgpu ehci_hcd |
| [ 8.381756] usb usb1: SerialNumber: 0000:00:1a.7 |
| [ 8.381935] hub 1-0:1.0: USB hub found |
| [ 8.381944] hub 1-0:1.0: 6 ports detected |
| [ 8.382357] ehci-pci 0000:00:1d.7: EHCI Host Controller |
| [ 8.382365] ehci-pci 0000:00:1d.7: new USB bus registered, assigned bus number 2 |
| [ 8.382376] ehci-pci 0000:00:1d.7: debug port 1 |
| [ 8.386271] ehci-pci 0000:00:1d.7: cache line size of 64 is not supported |
| [ 8.386323] ehci-pci 0000:00:1d.7: irq 16, io mem 0x90606000 |
| [ 8.392668] ehci-pci 0000:00:1d.7: USB 2.0 started, EHCI 1.00 |
| [ 8.392717] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 5.10 |
| [ 8.392721] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1 |
| [ 8.392723] usb usb2: Product: EHCI Host Controller |
| [ 8.392725] usb usb2: Manufacturer: Linux 5.10.78-rt55-greebo-amdgpu ehci_hcd |
| [ 8.392727] usb usb2: SerialNumber: 0000:00:1d.7 |
| [ 8.392869] hub 2-0:1.0: USB hub found |
| [ 8.392877] hub 2-0:1.0: 6 ports detected |
| [ 8.393164] uhci_hcd: USB Universal Host Controller Interface driver |
| [ 8.393270] uhci_hcd 0000:00:1a.0: UHCI Host Controller |
| [ 8.393277] uhci_hcd 0000:00:1a.0: new USB bus registered, assigned bus number 3 |
| [ 8.393347] uhci_hcd 0000:00:1a.0: irq 16, io base 0x00004000 |
| [ 8.393408] usb usb3: New USB device found, idVendor=1d6b, idProduct=0001, bcdDevice= 5.10 |
| [ 8.393412] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1 |
| [ 8.393414] usb usb3: Product: UHCI Host Controller |
| [ 8.393416] usb usb3: Manufacturer: Linux 5.10.78-rt55-greebo-amdgpu uhci_hcd |
| [ 8.393418] usb usb3: SerialNumber: 0000:00:1a.0 |
| [ 8.393545] hub 3-0:1.0: USB hub found |
| [ 8.393553] hub 3-0:1.0: 2 ports detected |
| [ 8.393832] uhci_hcd 0000:00:1a.1: UHCI Host Controller |
| [ 8.393839] uhci_hcd 0000:00:1a.1: new USB bus registered, assigned bus number 4 |
| [ 8.393914] uhci_hcd 0000:00:1a.1: irq 17, io base 0x00004020 |
| [ 8.393972] usb usb4: New USB device found, idVendor=1d6b, idProduct=0001, bcdDevice= 5.10 |
| [ 8.393975] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1 |
| [ 8.393978] usb usb4: Product: UHCI Host Controller |
| [ 8.393980] usb usb4: Manufacturer: Linux 5.10.78-rt55-greebo-amdgpu uhci_hcd |
| [ 8.393981] usb usb4: SerialNumber: 0000:00:1a.1 |
| [ 8.394108] hub 4-0:1.0: USB hub found |
| [ 8.394116] hub 4-0:1.0: 2 ports detected |
| [ 8.394373] uhci_hcd 0000:00:1a.2: UHCI Host Controller |
| [ 8.394380] uhci_hcd 0000:00:1a.2: new USB bus registered, assigned bus number 5 |
| [ 8.394446] uhci_hcd 0000:00:1a.2: irq 18, io base 0x00004040 |
| [ 8.394505] usb usb5: New USB device found, idVendor=1d6b, idProduct=0001, bcdDevice= 5.10 |
| [ 8.394508] usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1 |
| [ 8.394511] usb usb5: Product: UHCI Host Controller |
| [ 8.394513] usb usb5: Manufacturer: Linux 5.10.78-rt55-greebo-amdgpu uhci_hcd |
| [ 8.394514] usb usb5: SerialNumber: 0000:00:1a.2 |
| [ 8.394638] hub 5-0:1.0: USB hub found |
| [ 8.394646] hub 5-0:1.0: 2 ports detected |
| [ 8.394917] uhci_hcd 0000:00:1d.0: UHCI Host Controller |
| [ 8.394928] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 6 |
| [ 8.394993] uhci_hcd 0000:00:1d.0: irq 16, io base 0x00004060 |
| [ 8.395049] usb usb6: New USB device found, idVendor=1d6b, idProduct=0001, bcdDevice= 5.10 |
| [ 8.395052] usb usb6: New USB device strings: Mfr=3, Product=2, SerialNumber=1 |
| [ 8.395055] usb usb6: Product: UHCI Host Controller |
| [ 8.395057] usb usb6: Manufacturer: Linux 5.10.78-rt55-greebo-amdgpu uhci_hcd |
| [ 8.395058] usb usb6: SerialNumber: 0000:00:1d.0 |
| [ 8.395185] hub 6-0:1.0: USB hub found |
| [ 8.395193] hub 6-0:1.0: 2 ports detected |
| [ 8.395452] uhci_hcd 0000:00:1d.1: UHCI Host Controller |
| [ 8.395459] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 7 |
| [ 8.395528] uhci_hcd 0000:00:1d.1: irq 17, io base 0x00004080 |
| [ 8.395593] usb usb7: New USB device found, idVendor=1d6b, idProduct=0001, bcdDevice= 5.10 |
| [ 8.395597] usb usb7: New USB device strings: Mfr=3, Product=2, SerialNumber=1 |
| [ 8.395599] usb usb7: Product: UHCI Host Controller |
| [ 8.395601] usb usb7: Manufacturer: Linux 5.10.78-rt55-greebo-amdgpu uhci_hcd |
| [ 8.395603] usb usb7: SerialNumber: 0000:00:1d.1 |
| [ 8.395744] hub 7-0:1.0: USB hub found |
| [ 8.395752] hub 7-0:1.0: 2 ports detected |
| [ 8.396003] uhci_hcd 0000:00:1d.2: UHCI Host Controller |
| [ 8.396010] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 8 |
| [ 8.396075] uhci_hcd 0000:00:1d.2: irq 18, io base 0x000040a0 |
| [ 8.396133] usb usb8: New USB device found, idVendor=1d6b, idProduct=0001, bcdDevice= 5.10 |
| [ 8.396136] usb usb8: New USB device strings: Mfr=3, Product=2, SerialNumber=1 |
| [ 8.396139] usb usb8: Product: UHCI Host Controller |
| [ 8.396140] usb usb8: Manufacturer: Linux 5.10.78-rt55-greebo-amdgpu uhci_hcd |
| [ 8.396142] usb usb8: SerialNumber: 0000:00:1d.2 |
| [ 8.396265] hub 8-0:1.0: USB hub found |
| [ 8.396273] hub 8-0:1.0: 2 ports detected |
| [ 8.396508] usbcore: registered new interface driver uas |
| [ 8.396544] usbcore: registered new interface driver usb-storage |
| [ 8.396577] usbcore: registered new interface driver ftdi_sio |
| [ 8.396584] usbserial: USB Serial support registered for FTDI USB Serial Device |
| [ 8.396636] usbcore: registered new interface driver mct_u232 |
| [ 8.396642] usbserial: USB Serial support registered for MCT U232 |
| [ 8.396674] usbcore: registered new interface driver pl2303 |
| [ 8.396684] usbserial: USB Serial support registered for pl2303 |
| [ 8.396739] i8042: PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at 0x60,0x64 irq 1,12 |
| [ 8.399629] serio: i8042 KBD port at 0x60,0x64 irq 1 |
| [ 8.399729] serio: i8042 AUX port at 0x60,0x64 irq 12 |
| [ 8.401732] mousedev: PS/2 mouse device common for all mice |
| [ 8.401821] rtc_cmos 00:03: RTC can wake from S4 |
| [ 8.402120] rtc_cmos 00:03: registered as rtc0 |
| [ 8.402146] rtc_cmos 00:03: setting system clock to 2021-11-16T00:43:40 UTC (1637023420) |
| [ 8.402175] rtc_cmos 00:03: alarms up to one month, 242 bytes nvram, hpet irqs |
| [ 8.402196] i2c /dev entries driver |
| [ 8.402558] i801_smbus 0000:00:1f.3: SMBus using PCI interrupt |
| [ 8.403501] w83627ehf: Found W83667HG chip at 0x290 |
| [ 8.403823] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.11 |
| [ 8.403851] iTCO_wdt: Found a ICH10R TCO device (Version=2, TCOBASE=0x0560) |
| [ 8.403936] iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0) |
| [ 8.404033] device-mapper: ioctl: 4.43.0-ioctl (2020-10-01) initialised: dm-devel@redhat.com |
| [ 8.404050] hid: raw HID events driver (C) Jiri Kosina |
| [ 8.404087] usbcore: registered new interface driver usbhid |
| [ 8.404089] usbhid: USB HID core driver |
| [ 8.419578] gameport gameport0: EMU10K1 is pci0000:06:01.1/gameport0, io 0x5120, speed 928kHz |
| [ 8.419992] usbcore: registered new interface driver snd-usb-audio |
| [ 8.420220] NET: Registered protocol family 10 |
| [ 8.420518] Segment Routing with IPv6 |
| [ 8.420541] NET: Registered protocol family 17 |
| [ 8.420567] Key type dns_resolver registered |
| [ 8.420862] microcode: sig=0x1067a, pf=0x1, revision=0xa0b |
| [ 8.420873] microcode: Microcode Update Driver: v2.2. |
| [ 8.420878] IPI shorthand broadcast: enabled |
| [ 8.422506] printk: console [tty0]: printing thread started |
| [ 8.422615] printk: console [ttyS0]: printing thread started |
| [ 8.422625] registered taskstats version 1 |
| [ 8.422946] printk: console [netcon0]: printing thread started |
| [ 8.422951] printk: console [netcon0] enabled |
| [ 8.422952] netconsole: network logging started |
| [ 8.423153] ALSA device list: |
| [ 8.423154] #0: SB Live! 5.1 (rev.8, serial:0x80641102) at 0x5100, irq 17 |
| [ 8.610115] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300) |
| [ 8.612013] ata1.00: supports DRM functions and may not be fully accessible |
| [ 8.612427] ata1.00: disabling queued TRIM support |
| [ 8.612430] ata1.00: ATA-9: Samsung SSD 840 EVO 250GB, EXT0DB6Q, max UDMA/133 |
| [ 8.612432] ata1.00: 488397168 sectors, multi 1: LBA48 NCQ (depth 32), AA |
| [ 8.613023] ata1.00: supports DRM functions and may not be fully accessible |
| [ 8.613427] ata1.00: disabling queued TRIM support |
| [ 8.613847] ata1.00: configured for UDMA/133 |
| [ 8.613958] scsi 1:0:0:0: Direct-Access ATA Samsung SSD 840 DB6Q PQ: 0 ANSI: 5 |
| [ 8.614494] sd 1:0:0:0: Attached scsi generic sg0 type 0 |
| [ 8.614573] sd 1:0:0:0: [sda] 488397168 512-byte logical blocks: (250 GB/233 GiB) |
| [ 8.614589] sd 1:0:0:0: [sda] Write Protect is off |
| [ 8.614592] sd 1:0:0:0: [sda] Mode Sense: 00 3a 00 00 |
| [ 8.614616] sd 1:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA |
| [ 8.615425] sda: sda1 sda2 sda3 |
| [ 8.615843] sd 1:0:0:0: [sda] Attached SCSI disk |
| [ 8.622677] usb 1-2: new high-speed USB device number 2 using ehci-pci |
| [ 8.639670] usb 2-1: new high-speed USB device number 2 using ehci-pci |
| [ 8.769253] usb 2-1: New USB device found, idVendor=05e3, idProduct=0610, bcdDevice=32.98 |
| [ 8.769257] usb 2-1: New USB device strings: Mfr=0, Product=1, SerialNumber=0 |
| [ 8.769260] usb 2-1: Product: USB2.0 Hub |
| [ 8.769671] hub 2-1:1.0: USB hub found |
| [ 8.770004] hub 2-1:1.0: 2 ports detected |
| [ 8.784786] usb 1-2: New USB device found, idVendor=0bda, idProduct=0321, bcdDevice=11.21 |
| [ 8.784790] usb 1-2: New USB device strings: Mfr=1, Product=2, SerialNumber=3 |
| [ 8.784793] usb 1-2: Product: USB3.0 Card Reader |
| [ 8.784794] usb 1-2: Manufacturer: Realtek |
| [ 8.784796] usb 1-2: SerialNumber: 201312261010 |
| [ 8.791060] usb-storage 1-2:1.0: USB Mass Storage device detected |
| [ 8.791180] scsi host9: usb-storage 1-2:1.0 |
| [ 8.876748] firewire_core 0000:06:03.0: created device fw0: GUID 001e8c00017d4026, S400 |
| [ 8.886670] usb 2-4: new high-speed USB device number 3 using ehci-pci |
| [ 8.921948] ata2: SATA link up 3.0 Gbps (SStatus 123 SControl 300) |
| [ 8.922183] ata2.00: supports DRM functions and may not be fully accessible |
| [ 8.922622] ata2.00: disabling queued TRIM support |
| [ 8.922624] ata2.00: ATA-11: Samsung SSD 870 EVO 250GB, SVT01B6Q, max UDMA/133 |
| [ 8.922626] ata2.00: 488397168 sectors, multi 1: LBA48 NCQ (depth 32), AA |
| [ 8.924414] ata2.00: supports DRM functions and may not be fully accessible |
| [ 8.924800] ata2.00: disabling queued TRIM support |
| [ 8.926318] ata2.00: configured for UDMA/133 |
| [ 8.926386] scsi 2:0:0:0: Direct-Access ATA Samsung SSD 870 1B6Q PQ: 0 ANSI: 5 |
| [ 8.926744] sd 2:0:0:0: Attached scsi generic sg1 type 0 |
| [ 8.926761] ata2.00: Enabling discard_zeroes_data |
| [ 8.926834] sd 2:0:0:0: [sdb] 488397168 512-byte logical blocks: (250 GB/233 GiB) |
| [ 8.926849] sd 2:0:0:0: [sdb] Write Protect is off |
| [ 8.926851] sd 2:0:0:0: [sdb] Mode Sense: 00 3a 00 00 |
| [ 8.926875] sd 2:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA |
| [ 8.927465] ata2.00: Enabling discard_zeroes_data |
| [ 8.927800] sdb: sdb1 sdb2 sdb3 |
| [ 8.928019] ata2.00: Enabling discard_zeroes_data |
| [ 8.928176] sd 2:0:0:0: [sdb] Attached SCSI disk |
| [ 9.016254] usb 2-4: New USB device found, idVendor=05e3, idProduct=0614, bcdDevice= 1.97 |
| [ 9.016259] usb 2-4: New USB device strings: Mfr=0, Product=1, SerialNumber=0 |
| [ 9.016261] usb 2-4: Product: USB2.0 Hub Charger |
| [ 9.016674] hub 2-4:1.0: USB hub found |
| [ 9.017005] hub 2-4:1.0: 4 ports detected |
| [ 9.078665] usb 2-1.2: new full-speed USB device number 4 using ehci-pci |
| [ 9.163379] usb 2-1.2: New USB device found, idVendor=0403, idProduct=6001, bcdDevice= 6.00 |
| [ 9.163383] usb 2-1.2: New USB device strings: Mfr=1, Product=2, SerialNumber=3 |
| [ 9.163386] usb 2-1.2: Product: FT232R USB UART |
| [ 9.163388] usb 2-1.2: Manufacturer: FTDI |
| [ 9.163389] usb 2-1.2: SerialNumber: AB0KV94J |
| [ 9.165901] ftdi_sio 2-1.2:1.0: FTDI USB Serial Device converter detected |
| [ 9.165931] usb 2-1.2: Detected FT232RL |
| [ 9.166566] usb 2-1.2: FTDI USB Serial Device converter now attached to ttyUSB0 |
| [ 9.234083] ata3: SATA link down (SStatus 0 SControl 300) |
| [ 9.270667] usb 2-5: new high-speed USB device number 5 using ehci-pci |
| [ 9.401377] usb 2-5: New USB device found, idVendor=05e3, idProduct=0610, bcdDevice=32.98 |
| [ 9.401381] usb 2-5: New USB device strings: Mfr=0, Product=1, SerialNumber=0 |
| [ 9.401384] usb 2-5: Product: USB2.0 Hub |
| [ 9.401790] hub 2-5:1.0: USB hub found |
| [ 9.402124] hub 2-5:1.0: 2 ports detected |
| [ 9.464669] usb 2-4.2: new full-speed USB device number 6 using ehci-pci |
| [ 9.538060] ata4: SATA link down (SStatus 0 SControl 300) |
| [ 9.544755] usb 2-4.2: config 1 interface 0 altsetting 0 has 2 endpoint descriptors, different from the interface descriptor's value: 1 |
| [ 9.545877] usb 2-4.2: New USB device found, idVendor=27b8, idProduct=01ed, bcdDevice= 0.02 |
| [ 9.545881] usb 2-4.2: New USB device strings: Mfr=1, Product=2, SerialNumber=3 |
| [ 9.545883] usb 2-4.2: Product: blink(1) mk2 |
| [ 9.545885] usb 2-4.2: Manufacturer: ThingM |
| [ 9.545887] usb 2-4.2: SerialNumber: 200060D6 |
| [ 9.547787] hid-led 0003:27B8:01ED.0001: hidraw0: USB HID v1.01 Device [ThingM blink(1) mk2] on usb-0000:00:1d.7-4.2/input0 |
| [ 9.547892] hid-led 0003:27B8:01ED.0001: ThingM blink(1) initialized |
| [ 9.842111] ata5: SATA link down (SStatus 0 SControl 300) |
| [ 9.862538] scsi 9:0:0:0: Direct-Access Generic- USB3.0 CRW-CF/MD 1.00 PQ: 0 ANSI: 4 |
| [ 9.862734] sd 9:0:0:0: Attached scsi generic sg2 type 0 |
| [ 9.874421] scsi 9:0:0:1: Direct-Access Generic- USB3.0 CRW-SD 1.00 PQ: 0 ANSI: 4 |
| [ 9.874527] sd 9:0:0:1: Attached scsi generic sg3 type 0 |
| [ 9.880160] sd 9:0:0:0: [sdc] Attached SCSI removable disk |
| [ 9.890792] scsi 9:0:0:2: Direct-Access Generic- USB3.0 CRW-MS 1.00 PQ: 0 ANSI: 4 |
| [ 9.890931] sd 9:0:0:2: Attached scsi generic sg4 type 0 |
| [ 9.896281] sd 9:0:0:1: [sdd] Attached SCSI removable disk |
| [ 9.901288] sd 9:0:0:2: [sde] Attached SCSI removable disk |
| [ 10.146117] ata6: SATA link down (SStatus 0 SControl 300) |
| [ 10.256668] usb 8-2: new full-speed USB device number 2 using uhci_hcd |
| [ 10.312502] Freeing unused kernel image (initmem) memory: 900K |
| [ 10.312524] Write protecting the kernel read-only data: 22528k |
| [ 10.313331] Freeing unused kernel image (text/rodata gap) memory: 2044K |
| [ 10.313430] Freeing unused kernel image (rodata/data gap) memory: 116K |
| [ 10.313456] Run /init as init process |
| [ 10.313457] with arguments: |
| [ 10.313458] /init |
| [ 10.313458] with environment: |
| [ 10.313459] HOME=/ |
| [ 10.313459] TERM=linux |
| [ 10.313460] BOOT_IMAGE=/vmlinuz-5.10.78-rt55-greebo-amdgpu |
| [ 10.313460] cryptdevice=/dev/disk/by-uuid/ca7da344-795a-4073-8e03-f8005f155cde:sda3_crypt |
| [ 10.321723] udevd[152]: starting version 3.2.9 |
| [ 10.321914] random: udevd: uninitialized urandom read (16 bytes read) |
| [ 10.321953] random: udevd: uninitialized urandom read (16 bytes read) |
| [ 10.321964] random: udevd: uninitialized urandom read (16 bytes read) |
| [ 10.323057] udevd[153]: starting eudev-3.2.9 |
| [ 10.429707] usb 8-2: New USB device found, idVendor=046d, idProduct=c332, bcdDevice= 3.02 |
| [ 10.429712] usb 8-2: New USB device strings: Mfr=1, Product=2, SerialNumber=3 |
| [ 10.429714] usb 8-2: Product: Gaming Mouse G502 |
| [ 10.429716] usb 8-2: Manufacturer: Logitech |
| [ 10.429717] usb 8-2: SerialNumber: 0B7A364B3738 |
| [ 10.443130] input: Logitech Gaming Mouse G502 as /devices/pci0000:00/0000:00:1d.2/usb8/8-2/8-2:1.0/0003:046D:C332.0002/input/input3 |
| [ 10.444702] hid-generic 0003:046D:C332.0002: input,hidraw1: USB HID v1.11 Mouse [Logitech Gaming Mouse G502] on usb-0000:00:1d.2-2/input0 |
| [ 10.448247] md/raid1:md0: active with 2 out of 2 mirrors |
| [ 10.448264] md0: detected capacity change from 0 to 1071644672 |
| [ 10.449515] input: Logitech Gaming Mouse G502 Keyboard as /devices/pci0000:00/0000:00:1d.2/usb8/8-2/8-2:1.1/0003:046D:C332.0003/input/input4 |
| [ 10.450304] md/raid1:md2: active with 2 out of 2 mirrors |
| [ 10.452983] md/raid1:md1: active with 2 out of 2 mirrors |
| [ 10.452999] md1: detected capacity change from 0 to 64389906432 |
| [ 10.462562] md2: detected capacity change from 0 to 160927055872 |
| [ 10.500683] usb 2-4.3: new full-speed USB device number 8 using ehci-pci |
| [ 10.500818] input: Logitech Gaming Mouse G502 Consumer Control as /devices/pci0000:00/0000:00:1d.2/usb8/8-2/8-2:1.1/0003:046D:C332.0003/input/input5 |
| [ 10.500943] input: Logitech Gaming Mouse G502 System Control as /devices/pci0000:00/0000:00:1d.2/usb8/8-2/8-2:1.1/0003:046D:C332.0003/input/input6 |
| [ 10.501265] hid-generic 0003:046D:C332.0003: input,hiddev96,hidraw2: USB HID v1.11 Keyboard [Logitech Gaming Mouse G502] on usb-0000:00:1d.2-2/input1 |
| [ 10.583253] usb 2-4.3: New USB device found, idVendor=1111, idProduct=1111, bcdDevice= 2.10 |
| [ 10.583258] usb 2-4.3: New USB device strings: Mfr=1, Product=2, SerialNumber=0 |
| [ 10.583261] usb 2-4.3: Product: Ergo Pro Keyboard |
| [ 10.583263] usb 2-4.3: Manufacturer: Matias |
| [ 10.585393] input: Matias Ergo Pro Keyboard as /devices/pci0000:00/0000:00:1d.7/usb2/2-4/2-4.3/2-4.3:1.0/0003:1111:1111.0004/input/input9 |
| [ 10.636851] hid-generic 0003:1111:1111.0004: input,hidraw3: USB HID v1.00 Keyboard [Matias Ergo Pro Keyboard] on usb-0000:00:1d.7-4.3/input0 |
| [ 10.638906] input: Matias Ergo Pro Keyboard Consumer Control as /devices/pci0000:00/0000:00:1d.7/usb2/2-4/2-4.3/2-4.3:1.1/0003:1111:1111.0005/input/input10 |
| [ 10.690742] input: Matias Ergo Pro Keyboard System Control as /devices/pci0000:00/0000:00:1d.7/usb2/2-4/2-4.3/2-4.3:1.1/0003:1111:1111.0005/input/input11 |
| [ 10.690809] hid-generic 0003:1111:1111.0005: input,hidraw4: USB HID v1.00 Device [Matias Ergo Pro Keyboard] on usb-0000:00:1d.7-4.3/input1 |
| [ 13.808640] random: crng init done |
| [ 13.808644] random: 4 urandom warning(s) missed due to ratelimiting |
| [ 16.053361] XFS (dm-1): Mounting V5 Filesystem |
| [ 16.118239] XFS (dm-1): Ending clean mount |
| [ 16.121027] xfs filesystem being mounted at /new_root supports timestamps until 2038 (0x7fffffff) |
| [ 16.818230] udevd[615]: starting version 3.2.9 |
| [ 16.854792] udevd[615]: starting eudev-3.2.9 |
| [ 17.563395] XFS (dm-2): mounting with "discard" option, but the device does not support discard |
| [ 17.563552] XFS (dm-2): Mounting V5 Filesystem |
| [ 17.613707] XFS (dm-2): Ending clean mount |
| [ 17.619168] xfs filesystem being mounted at /home supports timestamps until 2038 (0x7fffffff) |
| [ 17.620045] XFS (md0): Mounting V5 Filesystem |
| [ 17.672105] XFS (md0): Ending clean mount |
| [ 17.674083] xfs filesystem being mounted at /boot supports timestamps until 2038 (0x7fffffff) |
| [ 17.908374] elogind[1169]: New seat seat0. |
| [ 17.909943] elogind[1169]: Watching system buttons on /dev/input/event0 (Power Button) |
| [ 17.910042] elogind[1169]: Watching system buttons on /dev/input/event2 (Logitech Gaming Mouse G502 Keyboard) |
| [ 17.910138] elogind[1169]: Watching system buttons on /dev/input/event3 (Logitech Gaming Mouse G502 Consumer Control) |
| [ 17.910234] elogind[1169]: Watching system buttons on /dev/input/event4 (Logitech Gaming Mouse G502 System Control) |
| [ 17.910333] elogind[1169]: Watching system buttons on /dev/input/event5 (Matias Ergo Pro Keyboard) |
| [ 17.910548] elogind[1169]: Watching system buttons on /dev/input/event7 (Matias Ergo Pro Keyboard System Control) |
| [ 18.595867] ATL1E 0000:05:00.0 eth0: NIC Link is Up <1000 Mbps Full Duplex> |
| [ 18.595879] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready |
| [ 26.667905] hwmon hwmon2: fan1 low limit and alarm disabled |
| [ 26.668008] hwmon hwmon2: fan4 low limit and alarm disabled |
| [ 32.480324] elogind[1169]: New session c1 of user stefan. |
| [ 60.894678] ata4: SATA link up 3.0 Gbps (SStatus 123 SControl 300) |
| [ 60.906915] ata4.00: ATA-8: KINGSTON SH103S3240G, 521ABBF0, max UDMA/133 |
| [ 60.906918] ata4.00: 468862128 sectors, multi 1: LBA48 NCQ (depth 32), AA |
| [ 60.916914] ata4.00: configured for UDMA/133 |
| [ 60.917025] scsi 4:0:0:0: Direct-Access ATA KINGSTON SH103S3 BBF0 PQ: 0 ANSI: 5 |
| [ 60.917399] sd 4:0:0:0: [sdf] 468862128 512-byte logical blocks: (240 GB/224 GiB) |
| [ 60.917415] sd 4:0:0:0: [sdf] Write Protect is off |
| [ 60.917418] sd 4:0:0:0: [sdf] Mode Sense: 00 3a 00 00 |
| [ 60.917443] sd 4:0:0:0: [sdf] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA |
| [ 60.917490] sd 4:0:0:0: Attached scsi generic sg5 type 0 |
| [ 60.944135] sdf: sdf1 sdf2 |
| [ 60.944419] sd 4:0:0:0: [sdf] Attached SCSI disk |
| [ 72.268374] XFS (dm-3): Mounting V5 Filesystem |
| [ 72.320026] XFS (dm-3): Ending clean mount |
| [ 72.322582] xfs filesystem being mounted at /mnt/build supports timestamps until 2038 (0x7fffffff) |
| [ 137.369037] elogind[1169]: New session c2 of user root. |
| [ 137.395731] elogind[1169]: Removed session c2. |
| [ 149.166115] elogind[1169]: New session c3 of user root. |
| [ 149.223175] elogind[1169]: Removed session c3. |
| [ 149.286929] elogind[1169]: New session c4 of user root. |
| [ 149.349397] elogind[1169]: Removed session c4. |
| [ 149.409629] elogind[1169]: New session c5 of user root. |
| [ 149.462194] elogind[1169]: Removed session c5. |
| [ 149.527203] elogind[1169]: New session c6 of user root. |
| [ 149.587671] elogind[1169]: Removed session c6. |
| [ 287.733639] elogind[1169]: New session c7 of user root. |
| [ 287.786587] elogind[1169]: Removed session c7. |
| [ 287.849409] elogind[1169]: New session c8 of user root. |
| [ 287.907985] elogind[1169]: Removed session c8. |
| [ 288.011937] elogind[1169]: New session c9 of user root. |
| [ 288.064257] elogind[1169]: Removed session c9. |
| [ 288.130533] elogind[1169]: New session c10 of user root. |