| [ 0.000000] Initializing cgroup subsys cpuset |
| [ 0.000000] Initializing cgroup subsys cpu |
| [ 0.000000] Initializing cgroup subsys cpuacct |
| [ 0.000000] Linux version 4.4.14-smp (root@hive) (gcc version 5.3.0 (GCC) ) #2 SMP Fri Jun 24 14:44:24 CDT 2016 |
| [ 0.000000] x86/fpu: Legacy x87 FPU detected. |
| [ 0.000000] x86/fpu: Using 'lazy' FPU context switches. |
| [ 0.000000] e820: BIOS-provided physical RAM map: |
| [ 0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009fbff] usable |
| [ 0.000000] BIOS-e820: [mem 0x000000000009fc00-0x000000000009ffff] reserved |
| [ 0.000000] BIOS-e820: [mem 0x00000000000f0000-0x00000000000fffff] reserved |
| [ 0.000000] BIOS-e820: [mem 0x0000000000100000-0x000000001ffa9fff] usable |
| [ 0.000000] BIOS-e820: [mem 0x000000001ffaa000-0x000000001fffffff] reserved |
| [ 0.000000] BIOS-e820: [mem 0x00000000ff800000-0x00000000ffffffff] reserved |
| [ 0.000000] Notice: NX (Execute Disable) protection missing in CPU! |
| [ 0.000000] SMBIOS 2.8 present. |
| [ 0.000000] DMI: ASUS P3B-F/P3B-F, BIOS 4.11-2240-gf9a4a4a58a 04/17/2020 |
| [ 0.000000] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved |
| [ 0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable |
| [ 0.000000] e820: last_pfn = 0x1ffaa max_arch_pfn = 0x1000000 |
| [ 0.000000] MTRR default type: uncachable |
| [ 0.000000] MTRR fixed ranges enabled: |
| [ 0.000000] 00000-9FFFF write-back |
| [ 0.000000] A0000-BFFFF uncachable |
| [ 0.000000] C0000-FFFFF write-back |
| [ 0.000000] MTRR variable ranges enabled: |
| [ 0.000000] 0 base 000000000 mask FE0000000 write-back |
| [ 0.000000] 1 base 0F0000000 mask FF8000000 write-combining |
| [ 0.000000] 2 disabled |
| [ 0.000000] 3 disabled |
| [ 0.000000] 4 disabled |
| [ 0.000000] 5 disabled |
| [ 0.000000] 6 disabled |
| [ 0.000000] 7 disabled |
| [ 0.000000] x86/PAT: PAT not supported by CPU. |
| [ 0.000000] initial memory mapped: [mem 0x00000000-0x027fffff] |
| [ 0.000000] Base memory trampoline at [c009b000] 9b000 size 16384 |
| [ 0.000000] BRK [0x0224c000, 0x0224cfff] PGTABLE |
| [ 0.000000] BRK [0x0224d000, 0x0224efff] PGTABLE |
| [ 0.000000] BRK [0x0224f000, 0x0224ffff] PGTABLE |
| [ 0.000000] BRK [0x02250000, 0x02250fff] PGTABLE |
| [ 0.000000] ACPI: Early table checksum verification disabled |
| [ 0.000000] ACPI BIOS Error (bug): A valid RSDP was not found (20150930/tbxfroot-243) |
| [ 0.000000] No NUMA configuration found |
| [ 0.000000] Faking a node at [mem 0x0000000000000000-0x000000001ffa9fff] |
| [ 0.000000] NODE_DATA(0) allocated [mem 0x1ffa8000-0x1ffa9fff] |
| [ 0.000000] 0MB HIGHMEM available. |
| [ 0.000000] 511MB LOWMEM available. |
| [ 0.000000] max_low_pfn = 1ffaa, highstart_pfn = 1ffaa |
| [ 0.000000] Low memory ends at vaddr dffaa000 |
| [ 0.000000] High memory starts at vaddr dffaa000 |
| [ 0.000000] mapped low ram: 0 - 1ffaa000 |
| [ 0.000000] low ram: 0 - 1ffaa000 |
| [ 0.000000] Node: 0, start_pfn: 1, end_pfn: 9f |
| [ 0.000000] Setting physnode_map array to node 0 for pfns: |
| [ 0.000000] 0 |
| [ 0.000000] Node: 0, start_pfn: 100, end_pfn: 1ffaa |
| [ 0.000000] Setting physnode_map array to node 0 for pfns: |
| [ 0.000000] 0 4000 8000 c000 10000 14000 18000 1c000 |
| [ 0.000000] Zone ranges: |
| [ 0.000000] DMA [mem 0x0000000000001000-0x0000000000ffffff] |
| [ 0.000000] Normal [mem 0x0000000001000000-0x000000001ffa9fff] |
| [ 0.000000] HighMem empty |
| [ 0.000000] Movable zone start for each node |
| [ 0.000000] Early memory node ranges |
| [ 0.000000] node 0: [mem 0x0000000000001000-0x000000000009efff] |
| [ 0.000000] node 0: [mem 0x0000000000100000-0x000000001ffa9fff] |
| [ 0.000000] Initmem setup node 0 [mem 0x0000000000001000-0x000000001ffa9fff] |
| [ 0.000000] On node 0 totalpages: 130888 |
| [ 0.000000] free_area_init_node: node 0, pgdat dffa8000, node_mem_map dfaa8028 |
| [ 0.000000] DMA zone: 40 pages used for memmap |
| [ 0.000000] DMA zone: 0 pages reserved |
| [ 0.000000] DMA zone: 3998 pages, LIFO batch:0 |
| [ 0.000000] Normal zone: 1240 pages used for memmap |
| [ 0.000000] Normal zone: 126890 pages, LIFO batch:31 |
| [ 0.000000] Using APIC driver default |
| [ 0.000000] SFI: Simple Firmware Interface v0.81 http://simplefirmware.org |
| [ 0.000000] smpboot: Allowing 1 CPUs, 0 hotplug CPUs |
| [ 0.000000] Local APIC disabled by BIOS -- you can enable it with "lapic" |
| [ 0.000000] APIC: disable apic facility |
| [ 0.000000] APIC: switched to apic NOOP |
| [ 0.000000] PM: Registered nosave memory: [mem 0x00000000-0x00000fff] |
| [ 0.000000] PM: Registered nosave memory: [mem 0x0009f000-0x0009ffff] |
| [ 0.000000] PM: Registered nosave memory: [mem 0x000a0000-0x000effff] |
| [ 0.000000] PM: Registered nosave memory: [mem 0x000f0000-0x000fffff] |
| [ 0.000000] e820: [mem 0x20000000-0xff7fffff] available for PCI devices |
| [ 0.000000] clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 1910969940391419 ns |
| [ 0.000000] setup_percpu: NR_CPUS:32 nr_cpumask_bits:32 nr_cpu_ids:1 nr_node_ids:1 |
| [ 0.000000] PERCPU: Embedded 18 pages/cpu @dfa92000 s42636 r0 d31092 u73728 |
| [ 0.000000] pcpu-alloc: s42636 r0 d31092 u73728 alloc=18*4096 |
| [ 0.000000] pcpu-alloc: [0] 0 |
| [ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 129608 |
| [ 0.000000] Policy zone: Normal |
| [ 0.000000] Kernel command line: BOOT_IMAGE=Linux ro root=801 vt.default_utf8=0 |
| [ 0.000000] PID hash table entries: 2048 (order: 1, 8192 bytes) |
| [ 0.000000] Dentry cache hash table entries: 65536 (order: 6, 262144 bytes) |
| [ 0.000000] Inode-cache hash table entries: 32768 (order: 5, 131072 bytes) |
| [ 0.000000] Initializing CPU#0 |
| [ 0.000000] Initializing HighMem for node 0 (00000000:00000000) |
| [ 0.000000] Memory: 499116K/523552K available (12341K kernel code, 927K rwdata, 3824K rodata, 832K init, 676K bss, 24436K reserved, 0K cma-reserved, 0K highmem) |
| [ 0.000000] virtual kernel memory layout: |
| fixmap : 0xffd37000 - 0xfffff000 (2848 kB) |
| pkmap : 0xffa00000 - 0xffc00000 (2048 kB) |
| vmalloc : 0xe07aa000 - 0xff9fe000 ( 498 MB) |
| lowmem : 0xc0000000 - 0xdffaa000 ( 511 MB) |
| .init : 0xc20b4000 - 0xc2184000 ( 832 kB) |
| .data : 0xc1c0d8e3 - 0xc20b2d80 (4757 kB) |
| .text : 0xc1000000 - 0xc1c0d8e3 (12342 kB) |
| [ 0.000000] Checking if this processor honours the WP bit even in supervisor mode...Ok. |
| [ 0.000000] SLUB: HWalign=32, Order=0-3, MinObjects=0, CPUs=1, Nodes=1 |
| [ 0.000000] Hierarchical RCU implementation. |
| [ 0.000000] Build-time adjustment of leaf fanout to 32. |
| [ 0.000000] RCU restricting CPUs from NR_CPUS=32 to nr_cpu_ids=1. |
| [ 0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=32, nr_cpu_ids=1 |
| [ 0.000000] NR_IRQS:2304 nr_irqs:32 16 |
| [ 0.000000] CPU 0 irqstacks, hard=df424000 soft=df426000 |
| [ 0.000000] Console: colour VGA+ 80x25 |
| [ 0.000000] console [tty0] enabled |
| [ 0.000000] tsc: Fast TSC calibration using PIT |
| [ 0.000000] tsc: Detected 1403.134 MHz processor |
| [ 0.001009] Calibrating delay loop (skipped), value calculated using timer frequency.. 2806.26 BogoMIPS (lpj=1403134) |
| [ 0.001213] pid_max: default: 32768 minimum: 301 |
| [ 0.002071] Security Framework initialized |
| [ 0.002217] Mount-cache hash table entries: 1024 (order: 0, 4096 bytes) |
| [ 0.002323] Mountpoint-cache hash table entries: 1024 (order: 0, 4096 bytes) |
| [ 0.003356] Initializing cgroup subsys io |
| [ 0.003497] Initializing cgroup subsys memory |
| [ 0.003641] Initializing cgroup subsys devices |
| [ 0.003756] Initializing cgroup subsys freezer |
| [ 0.003864] Initializing cgroup subsys net_cls |
| [ 0.004028] Initializing cgroup subsys perf_event |
| [ 0.004138] Initializing cgroup subsys net_prio |
| [ 0.004245] Initializing cgroup subsys pids |
| [ 0.004451] mce: CPU supports 5 MCE banks |
| [ 0.004600] Last level iTLB entries: 4KB 32, 2MB 0, 4MB 2 |
| [ 0.004703] Last level dTLB entries: 4KB 64, 2MB 0, 4MB 8, 1GB 0 |
| [ 0.025105] Freeing SMP alternatives memory: 40K (c2184000 - c218e000) |
| [ 0.025245] ftrace: allocating 41039 entries in 81 pages |
| [ 0.050581] smpboot: weird, boot CPU (#0) not listed by the BIOS |
| [ 0.050711] smpboot: SMP motherboard not detected |
| [ 0.051027] smpboot: SMP disabled |
| [ 0.051127] smpboot: Local APIC not detected. Using dummy APIC emulation. |
| [ 0.051312] Performance Events: |
| [ 0.051360] no APIC, boot with the "lapic" boot parameter to force-enable it. |
| [ 0.051548] no hardware sampling interrupt available. |
| [ 0.051646] p6 PMU driver. |
| [ 0.051746] ... version: 0 |
| [ 0.051842] ... bit width: 32 |
| [ 0.052015] ... generic registers: 2 |
| [ 0.052113] ... value mask: 00000000ffffffff |
| [ 0.052210] ... max period: 000000007fffffff |
| [ 0.052307] ... fixed-purpose events: 0 |
| [ 0.052403] ... event mask: 0000000000000003 |
| [ 0.053517] x86: Booted up 1 node, 1 CPUs |
| [ 0.053639] smpboot: Total of 1 processors activated (2806.26 BogoMIPS) |
| [ 0.054332] devtmpfs: initialized |
| [ 0.055751] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 1911260446275000 ns |
| [ 0.056286] xor: measuring software checksum speed |
| [ 0.066007] pIII_sse : 2808.000 MB/sec |
| [ 0.076006] prefetch64-sse: 2988.000 MB/sec |
| [ 0.076105] xor: using function: prefetch64-sse (2988.000 MB/sec) |
| [ 0.076241] atomic64_test: passed for i586+ platform with CX8 and with SSE |
| [ 0.076344] pinctrl core: initialized pinctrl subsystem |
| [ 0.077258] NET: Registered protocol family 16 |
| [ 0.077966] cpuidle: using governor ladder |
| [ 0.078024] cpuidle: using governor menu |
| [ 0.078333] clocksource: pit: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 1601818034827 ns |
| [ 0.079745] PCI: PCI BIOS revision 2.10 entry at 0xffa40, last bus=1 |
| [ 0.079856] PCI: Using configuration type 1 for base access |
| [ 0.111020] raid6: mmxx1 gen() 1328 MB/s |
| [ 0.128032] raid6: mmxx2 gen() 1574 MB/s |
| [ 0.145032] raid6: sse1x1 gen() 1195 MB/s |
| [ 0.162014] raid6: sse1x2 gen() 1562 MB/s |
| [ 0.179123] raid6: int32x1 gen() 410 MB/s |
| [ 0.196129] raid6: int32x1 xor() 210 MB/s |
| [ 0.213083] raid6: int32x2 gen() 535 MB/s |
| [ 0.230083] raid6: int32x2 xor() 292 MB/s |
| [ 0.247114] raid6: int32x4 gen() 480 MB/s |
| [ 0.264064] raid6: int32x4 xor() 296 MB/s |
| [ 0.281080] raid6: int32x8 gen() 421 MB/s |
| [ 0.298074] raid6: int32x8 xor() 263 MB/s |
| [ 0.298171] raid6: using algorithm mmxx2 gen() 1574 MB/s |
| [ 0.298270] raid6: using intx1 recovery algorithm |
| [ 0.298554] ACPI: Interpreter disabled. |
| [ 0.298852] vgaarb: loaded |
| [ 0.299403] SCSI subsystem initialized |
| [ 0.299705] libata version 3.00 loaded. |
| [ 0.299808] usbcore: registered new interface driver usbfs |
| [ 0.299964] usbcore: registered new interface driver hub |
| [ 0.300056] usbcore: registered new device driver usb |
| [ 0.300576] PCI: Probing PCI hardware |
| [ 0.300684] PCI: root bus 00: using default resources |
| [ 0.300689] PCI: Probing PCI hardware (bus 00) |
| [ 0.300779] PCI host bridge to bus 0000:00 |
| [ 0.300885] pci_bus 0000:00: root bus resource [io 0x0000-0xffff] |
| [ 0.301017] pci_bus 0000:00: root bus resource [mem 0x00000000-0xfffffffff] |
| [ 0.301121] pci_bus 0000:00: No busn resource found for root bus, will use [bus 00-ff] |
| [ 0.301306] pci 0000:00:00.0: [8086:7190] type 00 class 0x060000 |
| [ 0.301333] pci 0000:00:00.0: reg 0x10: [mem 0xe0000000-0xefffffff pref] |
| [ 0.301500] pci 0000:00:01.0: [8086:7191] type 01 class 0x060400 |
| [ 0.301617] pci 0000:00:04.0: [8086:7110] type 00 class 0x060100 |
| [ 0.301777] pci 0000:00:04.1: [8086:7111] type 00 class 0x010180 |
| [ 0.301824] pci 0000:00:04.1: reg 0x20: [io 0x1420-0x142f] |
| [ 0.301848] pci 0000:00:04.1: legacy IDE quirk: reg 0x10: [io 0x01f0-0x01f7] |
| [ 0.302014] pci 0000:00:04.1: legacy IDE quirk: reg 0x14: [io 0x03f6] |
| [ 0.302117] pci 0000:00:04.1: legacy IDE quirk: reg 0x18: [io 0x0170-0x0177] |
| [ 0.302219] pci 0000:00:04.1: legacy IDE quirk: reg 0x1c: [io 0x0376] |
| [ 0.302414] pci 0000:00:04.2: [8086:7112] type 00 class 0x0c0300 |
| [ 0.302462] pci 0000:00:04.2: reg 0x20: [io 0x1400-0x141f] |
| [ 0.302587] pci 0000:00:04.3: [8086:7113] type 00 class 0x068000 |
| [ 0.302596] * Found PM-Timer Bug on the chipset. Due to workarounds for a bug, |
| * this clock source is slow. Consider trying other clock sources |
| [ 0.302890] pci 0000:00:04.3: quirk: [io 0xe400-0xe43f] claimed by PIIX4 ACPI |
| [ 0.303012] pci 0000:00:04.3: quirk: [io 0x0f00-0x0f0f] claimed by PIIX4 SMB |
| [ 0.303258] pci 0000:00:0b.0: [10ec:8169] type 00 class 0x020000 |
| [ 0.303284] pci 0000:00:0b.0: reg 0x10: [io 0x1000-0x10ff] |
| [ 0.303297] pci 0000:00:0b.0: reg 0x14: [mem 0xf9120000-0xf91200ff] |
| [ 0.303337] pci 0000:00:0b.0: reg 0x30: [mem 0xf9100000-0xf911ffff pref] |
| [ 0.303361] pci 0000:00:0b.0: supports D1 D2 |
| [ 0.303367] pci 0000:00:0b.0: PME# supported from D1 D2 D3hot D3cold |
| [ 0.303565] pci 0000:01:00.0: [10de:0322] type 00 class 0x030000 |
| [ 0.303590] pci 0000:01:00.0: reg 0x10: [mem 0xf8000000-0xf8ffffff] |
| [ 0.303602] pci 0000:01:00.0: reg 0x14: [mem 0xf0000000-0xf7ffffff pref] |
| [ 0.303636] pci 0000:01:00.0: reg 0x30: [mem 0xf9000000-0xf901ffff pref] |
| [ 0.303724] vgaarb: setting as boot device: PCI:0000:01:00.0 |
| [ 0.303827] vgaarb: device added: PCI:0000:01:00.0,decodes=io+mem,owns=io+mem,locks=none |
| [ 0.304056] pci 0000:00:01.0: PCI bridge to [bus 01] |
| [ 0.304162] pci 0000:00:01.0: bridge window [mem 0xf8000000-0xf90fffff] |
| [ 0.304170] pci 0000:00:01.0: bridge window [mem 0xf0000000-0xf7ffffff pref] |
| [ 0.304184] pci_bus 0000:00: busn_res: [bus 00-ff] end is updated to 01 |
| [ 0.304252] pci 0000:00:04.0: PIIX/ICH IRQ router [8086:7110] |
| [ 0.304374] PCI: pci_cache_line_size set to 32 bytes |
| [ 0.304412] e820: reserve RAM buffer [mem 0x0009fc00-0x0009ffff] |
| [ 0.304419] e820: reserve RAM buffer [mem 0x1ffaa000-0x1fffffff] |
| [ 0.305364] clocksource: Switched to clocksource pit |
| [ 0.352351] pnp: PnP ACPI: disabled |
| [ 0.357728] pci 0000:00:01.0: PCI bridge to [bus 01] |
| [ 0.357857] pci 0000:00:01.0: bridge window [mem 0xf8000000-0xf90fffff] |
| [ 0.357962] pci 0000:00:01.0: bridge window [mem 0xf0000000-0xf7ffffff pref] |
| [ 0.358131] pci_bus 0000:00: resource 4 [io 0x0000-0xffff] |
| [ 0.358136] pci_bus 0000:00: resource 5 [mem 0x00000000-0xfffffffff] |
| [ 0.358143] pci_bus 0000:01: resource 1 [mem 0xf8000000-0xf90fffff] |
| [ 0.358149] pci_bus 0000:01: resource 2 [mem 0xf0000000-0xf7ffffff pref] |
| [ 0.358275] NET: Registered protocol family 2 |
| [ 0.359164] TCP established hash table entries: 4096 (order: 2, 16384 bytes) |
| [ 0.359343] TCP bind hash table entries: 4096 (order: 3, 32768 bytes) |
| [ 0.359557] TCP: Hash tables configured (established 4096 bind 4096) |
| [ 0.359894] UDP hash table entries: 256 (order: 1, 8192 bytes) |
| [ 0.361387] UDP-Lite hash table entries: 256 (order: 1, 8192 bytes) |
| [ 0.361779] NET: Registered protocol family 1 |
| [ 0.362296] RPC: Registered named UNIX socket transport module. |
| [ 0.362411] RPC: Registered udp transport module. |
| [ 0.362509] RPC: Registered tcp transport module. |
| [ 0.362606] RPC: Registered tcp NFSv4.1 backchannel transport module. |
| [ 0.362804] pci 0000:00:00.0: Limiting direct PCI/PCI transfers |
| [ 0.362947] PCI: setting IRQ 5 as level-triggered |
| [ 0.362955] pci 0000:00:04.2: assigned PCI INT D -> IRQ 5 |
| [ 0.363108] pci 0000:01:00.0: Video device with shadowed ROM |
| [ 0.363113] PCI: CLS 64 bytes, default 32 |
| [ 0.363818] platform rtc_cmos: registered platform RTC device (no PNP device found) |
| [ 0.365310] futex hash table entries: 256 (order: 2, 16384 bytes) |
| [ 0.365500] audit: initializing netlink subsys (disabled) |
| [ 0.365733] audit: type=2000 audit(1867520717.364:1): initialized |
| [ 0.366166] Initialise system trusted keyring |
| [ 0.372318] VFS: Disk quotas dquot_6.6.0 |
| [ 0.372583] VFS: Dquot-cache hash table entries: 1024 (order 0, 4096 bytes) |
| [ 0.374604] NFS: Registering the id_resolver key type |
| [ 0.374819] Key type id_resolver registered |
| [ 0.374917] Key type id_legacy registered |
| [ 0.375026] Installing knfsd (copyright (C) 1996 okir@monad.swb.de). |
| [ 0.375750] ntfs: driver 2.1.32 [Flags: R/W]. |
| [ 0.376040] romfs: ROMFS MTD (C) 2007 Red Hat, Inc. |
| [ 0.376400] JFS: nTxBlock = 3899, nTxLock = 31197 |
| [ 0.385925] SGI XFS with ACLs, security attributes, no debug enabled |
| [ 0.387568] ocfs2: Registered cluster interface o2cb |
| [ 0.387990] OCFS2 User DLM kernel interface loaded |
| [ 0.395062] async_tx: api initialized (async) |
| [ 0.395315] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 250) |
| [ 0.395627] io scheduler noop registered |
| [ 0.395845] io scheduler deadline registered |
| [ 0.396000] io scheduler cfq registered (default) |
| [ 0.396447] pci_hotplug: PCI Hot Plug PCI Core version: 0.5 |
| [ 0.396567] pciehp: PCI Express Hot Plug Controller Driver version: 0.4 |
| [ 0.396789] intel_idle: does not run on family 6 model 11 |
| [ 0.396862] isapnp: Scanning for PnP cards... |
| [ 0.753854] isapnp: No Plug & Play device found |
| [ 0.757916] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled |
| [ 1.002659] serial8250: ttyS0 at I/O 0x3f8 (irq = 4, base_baud = 115200) is a 16550A |
| [ 1.247618] serial8250: ttyS1 at I/O 0x2f8 (irq = 3, base_baud = 115200) is a 16550A |
| [ 1.251818] Floppy drive(s): fd0 is unknown type 15 (usb?), fd1 is unknown type 15 (usb?) |
| [ 1.262352] brd: module loaded |
| [ 1.262489] HP CISS Driver (v 3.6.26) |
| [ 1.263995] fnic: Cisco FCoE HBA Driver, ver 1.6.0.17a |
| [ 1.264357] fnic: Successfully Initialized Trace Buffer |
| [ 1.267741] FDC 0 is a post-1991 82077 |
| [ 1.267958] fnic: Successfully Initialized FC_CTLR Trace Buffer |
| [ 1.272683] Adaptec aacraid driver 1.2-1[41010]-ms |
| [ 1.272849] aic94xx: Adaptec aic94xx SAS/SATA driver version 1.0.3 loaded |
| [ 1.273180] scsi: <fdomain> Detection failed (no card) |
| [ 1.273294] sym53c416.c: Version 1.0.0-ac |
| [ 1.273420] qlogicfas: no cards were found, please specify I/O address and IRQ using iobase= and irq= options |
| [ 1.273687] qla2xxx [0000:00:00.0]-0005: : QLogic Fibre Channel HBA Driver: 8.07.00.26-k. |
| [ 1.273975] Emulex LightPulse Fibre Channel SCSI driver 11.0.0.0. |
| [ 1.274075] Copyright(c) 2004-2015 Emulex. All rights reserved. |
| [ 1.274412] Brocade BFA FC/FCOE SCSI driver - version: 3.2.23.0 |
| [ 1.296560] Failed initialization of WD-7000 SCSI card! |
| [ 1.345273] megaraid cmm: 2.20.2.7 (Release Date: Sun Jul 16 00:01:03 EST 2006) |
| [ 1.345580] megaraid: 2.20.5.1 (Release Date: Thu Nov 16 15:32:35 EST 2006) |
| [ 1.345740] megasas: 06.808.16.00-rc1 |
| [ 1.345898] mpt3sas version 09.102.00.00 loaded |
| [ 1.346243] GDT-HA: Storage RAID Controller Driver. Version: 3.05 |
| [ 1.346439] 3ware Storage Controller device driver for Linux v1.26.02.003. |
| [ 1.346621] 3ware 9000 Storage Controller device driver for Linux v2.26.02.014. |
| [ 1.346818] LSI 3ware SAS/SATA-RAID Controller device driver for Linux v3.26.02.000. |
| [ 1.347013] ipr: IBM Power RAID SCSI Device Driver version: 2.6.3 (October 17, 2015) |
| [ 1.347223] RocketRAID 3xxx/4xxx Controller driver v1.10.0 |
| [ 1.347357] stex: Promise SuperTrak EX Driver version: 4.6.0000.4 |
| [ 1.347710] st: Version 20101219, fixed bufsize 32768, s/g segs 256 |
| [ 1.348588] ata_piix 0000:00:04.1: version 2.13 |
| [ 1.349816] scsi host2: ata_piix |
| [ 1.350282] scsi host3: ata_piix |
| [ 1.350575] ata1: PATA max UDMA/33 cmd 0x1f0 ctl 0x3f6 bmdma 0x1420 irq 14 |
| [ 1.350679] ata2: PATA max UDMA/33 cmd 0x170 ctl 0x376 bmdma 0x1428 irq 15 |
| [ 1.353480] Fusion MPT base driver 3.04.20 |
| [ 1.353637] Copyright (c) 1999-2008 LSI Corporation |
| [ 1.353753] Fusion MPT SPI Host driver 3.04.20 |
| [ 1.353897] Fusion MPT FC Host driver 3.04.20 |
| [ 1.354059] Fusion MPT SAS Host driver 3.04.20 |
| [ 1.354228] Fusion MPT misc device (ioctl) driver 3.04.20 |
| [ 1.354497] mptctl: Registered with Fusion MPT base driver |
| [ 1.354645] mptctl: /dev/mptctl @ (major,minor=10,220) |
| [ 1.354749] Fusion MPT LAN driver 3.04.20 |
| [ 1.355067] i8042: PNP: No PS/2 controller found. Probing ports directly. |
| [ 1.357808] serio: i8042 KBD port at 0x60,0x64 irq 1 |
| [ 1.357928] serio: i8042 AUX port at 0x60,0x64 irq 12 |
| [ 1.358441] mousedev: PS/2 mouse device common for all mice |
| [ 1.358968] rtc_cmos rtc_cmos: rtc core: registered rtc_cmos as rtc0 |
| [ 1.359106] rtc_cmos rtc_cmos: alarms up to one day, 114 bytes nvram |
| [ 1.359232] md: linear personality registered for level -1 |
| [ 1.359334] md: raid0 personality registered for level 0 |
| [ 1.359434] md: raid1 personality registered for level 1 |
| [ 1.359604] md: raid10 personality registered for level 10 |
| [ 1.359933] md: raid6 personality registered for level 6 |
| [ 1.360037] md: raid5 personality registered for level 5 |
| [ 1.360135] md: raid4 personality registered for level 4 |
| [ 1.360238] md: multipath personality registered for level -4 |
| [ 1.360495] device-mapper: uevent: version 1.0.3 |
| [ 1.360898] device-mapper: ioctl: 4.34.0-ioctl (2015-10-28) initialised: dm-devel@redhat.com |
| [ 1.361495] input: Speakup as /devices/virtual/input/input1 |
| [ 1.361930] initialized device: /dev/synth, node (MAJOR 10, MINOR 25) |
| [ 1.362138] speakup 3.1.6: initialized |
| [ 1.362241] synth name on entry is: (null) |
| [ 1.362766] Initializing XFRM netlink socket |
| [ 1.362888] NET: Registered protocol family 17 |
| [ 1.363088] 9pnet: Installing 9P2000 support |
| [ 1.363278] Key type dns_resolver registered |
| [ 1.364195] microcode: CPU0 sig=0x6b1, pf=0x10, revision=0x1c |
| [ 1.364395] microcode: Microcode Update Driver: v2.01 <tigran@aivazian.fsnet.co.uk>, Peter Oruba |
| [ 1.364651] Using IPI No-Shortcut mode |
| [ 1.365222] registered taskstats version 1 |
| [ 1.365345] Loading compiled-in X.509 certificates |
| [ 1.366377] clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x1439b0ef28a, max_idle_ns: 440795238696 ns |
| [ 1.366653] clocksource: Switched to clocksource tsc |
| [ 1.367370] Btrfs loaded |
| [ 1.368365] Key type encrypted registered |
| [ 1.384320] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input0 |
| [ 1.506949] ata1.00: ATA-7: Maxtor 6E040L0, NAR61590, max UDMA/133 |
| [ 1.507067] ata1.00: 80293248 sectors, multi 0: LBA |
| [ 1.512778] ata1.00: configured for UDMA/33 |
| [ 1.513386] scsi 2:0:0:0: Direct-Access ATA Maxtor 6E040L0 1590 PQ: 0 ANSI: 5 |
| [ 1.514439] sd 2:0:0:0: [sda] 80293248 512-byte logical blocks: (41.1 GB/38.3 GiB) |
| [ 1.514808] sd 2:0:0:0: [sda] Write Protect is off |
| [ 1.514916] sd 2:0:0:0: [sda] Mode Sense: 00 3a 00 00 |
| [ 1.514971] sd 2:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA |
| [ 1.545630] sda: sda1 sda2 < sda5 > |
| [ 1.546750] sd 2:0:0:0: [sda] Attached SCSI disk |
| [ 1.550280] md: Waiting for all devices to be available before autodetect |
| [ 1.550395] md: If you don't use raid, use raid=noautodetect |
| [ 1.551143] md: Autodetecting RAID arrays. |
| [ 1.551259] md: Scanned 0 and added 0 devices. |
| [ 1.551359] md: autorun ... |
| [ 1.551455] md: ... autorun DONE. |
| [ 1.581175] EXT4-fs (sda1): couldn't mount as ext3 due to feature incompatibilities |
| [ 1.614517] EXT4-fs (sda1): mounted filesystem with ordered data mode. Opts: (null) |
| [ 1.614754] VFS: Mounted root (ext4 filesystem) readonly on device 8:1. |
| [ 1.658695] devtmpfs: mounted |
| [ 1.663893] Freeing unused kernel memory: 832K (c20b4000 - c2184000) |
| [ 1.664322] Write protecting the kernel text: 12344k |
| [ 1.664804] Write protecting the kernel read-only data: 3828k |
| [ 1.975801] random: nonblocking pool is initialized |
| [ 2.954144] loop: module loaded |
| [ 4.979237] udevd[509]: starting eudev-3.1.5 |
| [ 5.661319] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4 |
| [ 5.702901] r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded |
| [ 5.703178] PCI: setting IRQ 10 as level-triggered |
| [ 5.703191] r8169 0000:00:0b.0: assigned PCI INT A -> IRQ 10 |
| [ 5.703362] r8169 0000:00:0b.0 (unnamed net_device) (uninitialized): not PCI Express |
| [ 5.704086] r8169 0000:00:0b.0 eth0: RTL8169sb/8110sb at 0xe0a80000, 00:27:19:b0:27:7a, XID 10000000 IRQ 10 |
| [ 5.704267] r8169 0000:00:0b.0 eth0: jumbo features [frames: 7152 bytes, tx checksumming: ok] |
| [ 5.783210] Linux agpgart interface v0.103 |
| [ 5.913853] agpgart-intel 0000:00:00.0: Intel 440BX Chipset |
| [ 5.944250] agpgart-intel 0000:00:00.0: AGP aperture is 256M @ 0xe0000000 |
| [ 6.202304] piix4_smbus 0000:00:04.3: SMBus Host Controller at 0xf00, revision 0 |
| [ 6.273327] [drm] Initialized drm 1.1.0 20060810 |
| [ 6.280054] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver |
| [ 6.290535] ehci-pci: EHCI PCI platform driver |
| [ 6.294894] uhci_hcd: USB Universal Host Controller Interface driver |
| [ 6.295210] uhci_hcd 0000:00:04.2: found PCI INT D -> IRQ 5 |
| [ 6.295362] uhci_hcd 0000:00:04.2: UHCI Host Controller |
| [ 6.295707] uhci_hcd 0000:00:04.2: new USB bus registered, assigned bus number 1 |
| [ 6.295959] uhci_hcd 0000:00:04.2: irq 5, io base 0x00001400 |
| [ 6.296234] usb usb1: New USB device found, idVendor=1d6b, idProduct=0001 |
| [ 6.296343] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 |
| [ 6.296508] usb usb1: Product: UHCI Host Controller |
| [ 6.296611] usb usb1: Manufacturer: Linux 4.4.14-smp uhci_hcd |
| [ 6.296716] usb usb1: SerialNumber: 0000:00:04.2 |
| [ 6.297210] hub 1-0:1.0: USB hub found |
| [ 6.297341] hub 1-0:1.0: 2 ports detected |
| [ 8.463178] Adding 522236k swap on /dev/sda5. Priority:-1 extents:1 across:522236k |
| [ 8.590339] fuse init (API version 7.23) |
| [ 8.976936] EXT4-fs (sda1): re-mounted. Opts: (null) |
| [ 18.455052] r8169 0000:00:0b.0 eth0: link down |
| [ 18.455079] r8169 0000:00:0b.0 eth0: link down |
| [ 20.931007] r8169 0000:00:0b.0 eth0: link up |
| [ 22.196590] NET: Registered protocol family 10 |
| [ 478.592317] i2c /dev entries driver |
| [ 523.515915] i2c /dev entries driver |