| [ 0.000000] Initializing cgroup subsys cpuset |
| [ 0.000000] Initializing cgroup subsys cpu |
| [ 0.000000] Initializing cgroup subsys cpuacct |
| [ 0.000000] Linux version 3.16.0-4-amd64 (debian-kernel@lists.debian.org) (gcc version 4.8.4 (Debian 4.8.4-1) ) #1 SMP Debian 3.16.7-ckt9-2 (2015-04-13) |
| [ 0.000000] Command line: root=/dev/nfs initrd=initrd-cb-test-tgt-x86_64 rootfstype=nfs nfsroot=10.100.1.100:/nfsroots/cb-test-tgt-03,v3,hard,nointr,tcp ip=10.100.1.12::10.100.1.1:255.255.255.0:embed-o-matic:eth0:off console=ttyS0,115200n8 consoleblank=0 rw BOOT_IMAGE=vmlinuz-cb-test-tgt-x86_64 |
| [ 0.000000] e820: BIOS-provided physical RAM map: |
| [ 0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009fbff] usable |
| [ 0.000000] BIOS-e820: [mem 0x000000000009fc00-0x000000000009ffff] reserved |
| [ 0.000000] BIOS-e820: [mem 0x00000000000f0000-0x00000000000fffff] reserved |
| [ 0.000000] BIOS-e820: [mem 0x0000000000100000-0x00000000bff9efff] usable |
| [ 0.000000] BIOS-e820: [mem 0x00000000bff9f000-0x00000000bfffffff] reserved |
| [ 0.000000] BIOS-e820: [mem 0x0000000100000000-0x000000013fffffff] usable |
| [ 0.000000] NX (Execute Disable) protection: active |
| [ 0.000000] SMBIOS 2.7 present. |
| [ 0.000000] DMI: ASUS KFSN4-DRE/KFSN4-DRE, BIOS RAPTOR-NORMAL 04/26/2016 |
| [ 0.000000] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved |
| [ 0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable |
| [ 0.000000] AGP: No AGP bridge found |
| [ 0.000000] e820: last_pfn = 0x140000 max_arch_pfn = 0x400000000 |
| [ 0.000000] MTRR default type: uncachable |
| [ 0.000000] MTRR fixed ranges enabled: |
| [ 0.000000] 00000-9FFFF write-back |
| [ 0.000000] A0000-BFFFF uncachable |
| [ 0.000000] C0000-FFFFF write-back |
| [ 0.000000] MTRR variable ranges enabled: |
| [ 0.000000] 0 base 0000000000 mask FF80000000 write-back |
| [ 0.000000] 1 base 0080000000 mask FFC0000000 write-back |
| [ 0.000000] 2 base 00F8000000 mask FFFC000000 write-combining |
| [ 0.000000] 3 disabled |
| [ 0.000000] 4 disabled |
| [ 0.000000] 5 disabled |
| [ 0.000000] 6 disabled |
| [ 0.000000] 7 disabled |
| [ 0.000000] TOM2: 0000000140000000 aka 5120M |
| [ 0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106 |
| [ 0.000000] e820: last_pfn = 0xbff9f max_arch_pfn = 0x400000000 |
| [ 0.000000] found SMP MP-table at [mem 0x000f0850-0x000f085f] mapped at [ffff8800000f0850] |
| [ 0.000000] Base memory trampoline at [ffff880000099000] 99000 size 24576 |
| [ 0.000000] init_memory_mapping: [mem 0x00000000-0x000fffff] |
| [ 0.000000] [mem 0x00000000-0x000fffff] page 4k |
| [ 0.000000] BRK [0x01af4000, 0x01af4fff] PGTABLE |
| [ 0.000000] BRK [0x01af5000, 0x01af5fff] PGTABLE |
| [ 0.000000] BRK [0x01af6000, 0x01af6fff] PGTABLE |
| [ 0.000000] init_memory_mapping: [mem 0x13fe00000-0x13fffffff] |
| [ 0.000000] [mem 0x13fe00000-0x13fffffff] page 2M |
| [ 0.000000] BRK [0x01af7000, 0x01af7fff] PGTABLE |
| [ 0.000000] init_memory_mapping: [mem 0x13c000000-0x13fdfffff] |
| [ 0.000000] [mem 0x13c000000-0x13fdfffff] page 2M |
| [ 0.000000] init_memory_mapping: [mem 0x100000000-0x13bffffff] |
| [ 0.000000] [mem 0x100000000-0x13bffffff] page 2M |
| [ 0.000000] init_memory_mapping: [mem 0x00100000-0xbff9efff] |
| [ 0.000000] [mem 0x00100000-0x001fffff] page 4k |
| [ 0.000000] [mem 0x00200000-0xbfdfffff] page 2M |
| [ 0.000000] [mem 0xbfe00000-0xbff9efff] page 4k |
| [ 0.000000] RAMDISK: [mem 0x7f24c000-0x7fffefff] |
| [ 0.000000] ACPI: Early table checksum verification disabled |
| [ 0.000000] ACPI: RSDP 0x00000000000F09F0 000024 (v02 CORE ) |
| [ 0.000000] ACPI: XSDT 0x00000000BFFB00E0 00006C (v01 CORE COREBOOT 00000000 CORE 00000000) |
| [ 0.000000] ACPI: FACP 0x00000000BFFB28D0 000074 (v01 CORE COREBOOT 00000000 CORE 00000000) |
| [ 0.000000] ACPI: DSDT 0x00000000BFFB0280 002648 (v02 ASUS COREBOOT 00000001 INTL 20150619) |
| [ 0.000000] ACPI: FACS 0x00000000BFFB0240 000040 |
| [ 0.000000] ACPI: SSDT 0x00000000BFFB29D0 0006BD (v02 CORE COREBOOT 0000002A CORE 0000002A) |
| [ 0.000000] ACPI: TCPA 0x00000000BFFB3090 000032 (v02 CORE COREBOOT 00000000 CORE 00000000) |
| [ 0.000000] ACPI: APIC 0x00000000BFFB30D0 00008E (v01 CORE COREBOOT 00000000 CORE 00000000) |
| [ 0.000000] ACPI: SRAT 0x00000000BFFB3160 0000E8 (v01 CORE COREBOOT 00000000 CORE 00000000) |
| [ 0.000000] ACPI: SLIT 0x00000000BFFB3250 000030 (v01 CORE COREBOOT 00000000 CORE 00000000) |
| [ 0.000000] ACPI: HPET 0x00000000BFFB3280 000038 (v01 CORE COREBOOT 00000000 CORE 00000000) |
| [ 0.000000] ACPI: SRAT 0x00000000BFFB32C0 0000E8 (v01 CORE COREBOOT 00000000 CORE 00000000) |
| [ 0.000000] ACPI: SLIT 0x00000000BFFB33B0 000030 (v01 CORE COREBOOT 00000000 CORE 00000000) |
| [ 0.000000] ACPI: Local APIC address 0xfee00000 |
| [ 0.000000] SRAT: PXM 0 -> APIC 0x10 -> Node 0 |
| [ 0.000000] SRAT: PXM 0 -> APIC 0x11 -> Node 0 |
| [ 0.000000] SRAT: PXM 1 -> APIC 0x12 -> Node 1 |
| [ 0.000000] SRAT: PXM 1 -> APIC 0x13 -> Node 1 |
| [ 0.000000] SRAT: Node 0 PXM 0 [mem 0x00000000-0x0009ffff] |
| [ 0.000000] SRAT: Node 0 PXM 0 [mem 0x00100000-0xbfffffff] |
| [ 0.000000] SRAT: Node 0 PXM 0 [mem 0x100000000-0x13fffffff] |
| [ 0.000000] NUMA: Initialized distance table, cnt=2 |
| [ 0.000000] NUMA: Node 0 [mem 0x00000000-0x0009ffff] + [mem 0x00100000-0xbfffffff] -> [mem 0x00000000-0xbfffffff] |
| [ 0.000000] NUMA: Node 0 [mem 0x00000000-0xbfffffff] + [mem 0x100000000-0x13fffffff] -> [mem 0x00000000-0x13fffffff] |
| [ 0.000000] Initmem setup node 0 [mem 0x00000000-0x13fffffff] |
| [ 0.000000] NODE_DATA [mem 0x13fff7000-0x13fffbfff] |
| [ 0.000000] [ffffea0000000000-ffffea00045fffff] PMD -> [ffff88013b600000-ffff88013edfffff] on node 0 |
| [ 0.000000] Zone ranges: |
| [ 0.000000] DMA [mem 0x00001000-0x00ffffff] |
| [ 0.000000] DMA32 [mem 0x01000000-0xffffffff] |
| [ 0.000000] Normal [mem 0x100000000-0x13fffffff] |
| [ 0.000000] Movable zone start for each node |
| [ 0.000000] Early memory node ranges |
| [ 0.000000] node 0: [mem 0x00001000-0x0009efff] |
| [ 0.000000] node 0: [mem 0x00100000-0xbff9efff] |
| [ 0.000000] node 0: [mem 0x100000000-0x13fffffff] |
| [ 0.000000] On node 0 totalpages: 1048381 |
| [ 0.000000] DMA zone: 56 pages used for memmap |
| [ 0.000000] DMA zone: 21 pages reserved |
| [ 0.000000] DMA zone: 3998 pages, LIFO batch:0 |
| [ 0.000000] DMA32 zone: 10695 pages used for memmap |
| [ 0.000000] DMA32 zone: 782239 pages, LIFO batch:31 |
| [ 0.000000] Normal zone: 3584 pages used for memmap |
| [ 0.000000] Normal zone: 262144 pages, LIFO batch:31 |
| [ 0.000000] Detected use of extended apic ids on hypertransport bus |
| [ 0.000000] Detected use of extended apic ids on hypertransport bus |
| [ 0.000000] ACPI: PM-Timer IO Port: 0x4008 |
| [ 0.000000] ACPI: Local APIC address 0xfee00000 |
| [ 0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x10] enabled) |
| [ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x11] enabled) |
| [ 0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x12] enabled) |
| [ 0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x13] enabled) |
| [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1]) |
| [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1]) |
| [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x02] high edge lint[0x1]) |
| [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x03] high edge lint[0x1]) |
| [ 0.000000] ACPI: IOAPIC (id[0x08] address[0xfec00000] gsi_base[0]) |
| [ 0.000000] IOAPIC[0]: apic_id 8, version 17, address 0xfec00000, GSI 0-23 |
| [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level) |
| [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 14 global_irq 14 high edge) |
| [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 15 global_irq 15 high edge) |
| [ 0.000000] ACPI: IRQ9 used by override. |
| [ 0.000000] ACPI: IRQ14 used by override. |
| [ 0.000000] ACPI: IRQ15 used by override. |
| [ 0.000000] Using ACPI (MADT) for SMP configuration information |
| [ 0.000000] ACPI: HPET id: 0x10de8201 base: 0xfed00000 |
| [ 0.000000] smpboot: Allowing 4 CPUs, 0 hotplug CPUs |
| [ 0.000000] nr_irqs_gsi: 40 |
| [ 0.000000] PM: Registered nosave memory: [mem 0x0009f000-0x0009ffff] |
| [ 0.000000] PM: Registered nosave memory: [mem 0x000a0000-0x000effff] |
| [ 0.000000] PM: Registered nosave memory: [mem 0x000f0000-0x000fffff] |
| [ 0.000000] PM: Registered nosave memory: [mem 0xbff9f000-0xbfffffff] |
| [ 0.000000] PM: Registered nosave memory: [mem 0xc0000000-0xffffffff] |
| [ 0.000000] e820: [mem 0xc0000000-0xffffffff] available for PCI devices |
| [ 0.000000] Booting paravirtualized kernel on bare hardware |
| [ 0.000000] setup_percpu: NR_CPUS:512 nr_cpumask_bits:512 nr_cpu_ids:4 nr_node_ids:2 |
| [ 0.000000] PERCPU: Embedded 27 pages/cpu @ffff88013fc00000 s80896 r8192 d21504 u524288 |
| [ 0.000000] pcpu-alloc: s80896 r8192 d21504 u524288 alloc=1*2097152 |
| [ 0.000000] pcpu-alloc: [0] 0 1 2 3 |
| [ 0.000000] Built 1 zonelists in Node order, mobility grouping on. Total pages: 1034025 |
| [ 0.000000] Policy zone: Normal |
| [ 0.000000] Kernel command line: root=/dev/nfs initrd=initrd-cb-test-tgt-x86_64 rootfstype=nfs nfsroot=10.100.1.100:/nfsroots/cb-test-tgt-03,v3,hard,nointr,tcp ip=10.100.1.12::10.100.1.1:255.255.255.0:embed-o-matic:eth0:off console=ttyS0,115200n8 consoleblank=0 rw BOOT_IMAGE=vmlinuz-cb-test-tgt-x86_64 |
| [ 0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes) |
| [ 0.000000] AGP: Checking aperture... |
| [ 0.000000] AGP: No AGP bridge found |
| [ 0.000000] AGP: Node 0: aperture [bus addr 0xe8c0000000-0xe8c1ffffff] (32MB) |
| [ 0.000000] Aperture beyond 4GB. Ignoring. |
| [ 0.000000] AGP: Your BIOS doesn't leave a aperture memory hole |
| [ 0.000000] AGP: Please enable the IOMMU option in the BIOS setup |
| [ 0.000000] AGP: This costs you 64MB of RAM |
| [ 0.000000] AGP: Mapping aperture over RAM [mem 0xb4000000-0xb7ffffff] (65536KB) |
| [ 0.000000] PM: Registered nosave memory: [mem 0xb4000000-0xb7ffffff] |
| [ 0.000000] Memory: 3978532K/4193524K available (5207K kernel code, 946K rwdata, 1832K rodata, 1204K init, 840K bss, 214992K reserved) |
| [ 0.000000] Hierarchical RCU implementation. |
| [ 0.000000] RCU dyntick-idle grace-period acceleration is enabled. |
| [ 0.000000] RCU restricting CPUs from NR_CPUS=512 to nr_cpu_ids=4. |
| [ 0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=4 |
| [ 0.000000] NR_IRQS:33024 nr_irqs:712 16 |
| [ 0.000000] spurious 8259A interrupt: IRQ7. |
| [ 0.000000] Console: colour VGA+ 80x25 |
| [ 0.000000] console [ttyS0] enabled |
| [ 0.000000] mempolicy: Disabling automatic NUMA balancing. Configure with numa_balancing= or the kernel.numa_balancing sysctl |
| [ 0.000000] hpet clockevent registered |
| [ 0.000000] tsc: Fast TSC calibration using PIT |
| [ 0.000000] tsc: Detected 3015.410 MHz processor |
| [ 0.000000] tsc: Marking TSC unstable due to TSCs unsynchronized |
| [ 0.016000] Calibrating delay loop (skipped), value calculated using timer frequency.. 6030.82 BogoMIPS (lpj=12061640) |
| [ 0.020002] pid_max: default: 32768 minimum: 301 |
| [ 0.024012] ACPI: Core revision 20140424 |
| [ 0.029663] ACPI: All ACPI Tables successfully acquired |
| [ 0.035462] Security Framework initialized |
| [ 0.036013] AppArmor: AppArmor disabled by boot time parameter |
| [ 0.040001] Yama: disabled by default; enable with sysctl kernel.yama.* |
| [ 0.044324] Dentry cache hash table entries: 524288 (order: 10, 4194304 bytes) |
| [ 0.054213] Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes) |
| [ 0.057129] Mount-cache hash table entries: 8192 (order: 4, 65536 bytes) |
| [ 0.060012] Mountpoint-cache hash table entries: 8192 (order: 4, 65536 bytes) |
| [ 0.064356] Initializing cgroup subsys memory |
| [ 0.068010] Initializing cgroup subsys devices |
| [ 0.072010] Initializing cgroup subsys freezer |
| [ 0.076004] Initializing cgroup subsys net_cls |
| [ 0.080007] Initializing cgroup subsys blkio |
| [ 0.084006] Initializing cgroup subsys perf_event |
| [ 0.088002] Initializing cgroup subsys net_prio |
| [ 0.092029] tseg: 0000000000 |
| [ 0.092036] CPU: Physical Processor ID: 0 |
| [ 0.096001] CPU: Processor Core ID: 0 |
| [ 0.100002] mce: CPU supports 5 MCE banks |
| [ 0.104008] LVT offset 0 assigned for vector 0xf9 |
| [ 0.108003] process: using AMD E400 aware idle routine |
| [ 0.112003] Last level iTLB entries: 4KB 512, 2MB 8, 4MB 4 |
| Last level dTLB entries: 4KB 512, 2MB 8, 4MB 4, 1GB 0 |
| tlb_flushall_shift: 6 |
| [ 0.116079] Freeing SMP alternatives memory: 20K (ffffffff81a1b000 - ffffffff81a20000) |
| [ 0.120694] ftrace: allocating 21614 entries in 85 pages |
| [ 0.132431] ..TIMER: vector=0x30 apic1=0 pin1=0 apic2=0 pin2=0 |
| [ 0.178775] smpboot: CPU0: Dual-Core AMD Opteron(tm) Processor 8222 (fam: 0f, model: 41, stepping: 03) |
| [ 0.192000] Performance Events: AMD PMU driver. |
| [ 0.192002] ... version: 0 |
| [ 0.196000] ... bit width: 48 |
| [ 0.200000] ... generic registers: 4 |
| [ 0.204000] ... value mask: 0000ffffffffffff |
| [ 0.208000] ... max period: 00007fffffffffff |
| [ 0.212000] ... fixed-purpose events: 0 |
| [ 0.216000] ... event mask: 000000000000000f |
| [ 0.221512] NMI watchdog: enabled on all CPUs, permanently consumes one hw-PMU counter. |
| [ 0.224156] x86: Booting SMP configuration: |
| [ 0.228002] .... node #0, CPUs: #1 #2 #3 |
| [ 0.500051] x86: Booted up 1 node, 4 CPUs |
| [ 0.504002] smpboot: Total of 4 processors activated (24123.71 BogoMIPS) |
| [ 0.512103] devtmpfs: initialized |
| [ 0.521227] pinctrl core: initialized pinctrl subsystem |
| [ 0.524096] NET: Registered protocol family 16 |
| [ 0.528141] cpuidle: using governor ladder |
| [ 0.532002] cpuidle: using governor menu |
| [ 0.536005] node 0 link 1: io port [1000, 5fff] |
| [ 0.536008] TOM: 00000000c0000000 aka 3072M |
| [ 0.540002] node 0 link 1: mmio [a0000, bffff] |
| [ 0.540005] node 0 link 1: mmio [fc000000, fc5fffff] |
| [ 0.540006] node 0 link 1: mmio [f8000000, fbffffff] |
| [ 0.540007] TOM2: 0000000140000000 aka 5120M |
| [ 0.544002] bus: [bus 00-08] on node 0 link 1 |
| [ 0.544003] bus: 00 [io 0x0000-0xffff] |
| [ 0.544004] bus: 00 [mem 0x000a0000-0x000bffff] |
| [ 0.544006] bus: 00 [mem 0xc0000000-0xffffffff] |
| [ 0.544007] bus: 00 [mem 0x140000000-0xfcffffffff] |
| [ 0.544061] ACPI: bus type PCI registered |
| [ 0.548002] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5 |
| [ 0.552095] PCI: Using configuration type 1 for base access |
| [ 0.572087] ACPI: Added _OSI(Module Device) |
| [ 0.576002] ACPI: Added _OSI(Processor Device) |
| [ 0.580001] ACPI: Added _OSI(3.0 _SCP Extensions) |
| [ 0.584001] ACPI: Added _OSI(Processor Aggregator Device) |
| [ 0.593121] ACPI: Interpreter enabled |
| [ 0.596009] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S2_] (20140424/hwxface-580) |
| [ 0.604001] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S3_] (20140424/hwxface-580) |
| [ 0.614186] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S4_] (20140424/hwxface-580) |
| [ 0.624004] ACPI: (supports S0 S1 S5) |
| [ 0.628001] ACPI: Using IOAPIC for interrupt routing |
| [ 0.632030] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug |
| [ 0.641587] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-08]) |
| [ 0.644005] acpi PNP0A03:00: _OSC: OS supports [ASPM ClockPM Segments MSI] |
| [ 0.648011] acpi PNP0A03:00: _OSC: not requesting OS control; OS requires [ExtendedConfig ASPM ClockPM MSI] |
| [ 0.653629] acpi PNP0A03:00: host bridge window expanded to [io 0x0000-0x0cf7]; [io 0x03b0-0x03df] ignored |
| [ 0.656005] acpi PNP0A03:00: fail to add MMCONFIG information, can't access extended PCI configuration space under this bridge. |
| [ 0.660115] PCI host bridge to bus 0000:00 |
| [ 0.664002] pci_bus 0000:00: root bus resource [bus 00-08] |
| [ 0.668002] pci_bus 0000:00: root bus resource [io 0x0d00-0x5fff] |
| [ 0.672002] pci_bus 0000:00: root bus resource [mem 0xf8000000-0xfbffffff] |
| [ 0.676002] pci_bus 0000:00: root bus resource [mem 0xfc000000-0xfc5fffff] |
| [ 0.680001] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff] |
| [ 0.684001] pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7] |
| [ 0.688011] pci 0000:00:00.0: [10de:005e] type 00 class 0x058000 |
| [ 0.688125] pci 0000:00:01.0: [10de:0051] type 00 class 0x060100 |
| [ 0.688130] pci 0000:00:01.0: reg 0x10: [io 0x4c00-0x4c7f] |
| [ 0.688204] pci 0000:00:01.1: [10de:0052] type 00 class 0x0c0500 |
| [ 0.688210] pci 0000:00:01.1: reg 0x10: [io 0x5000-0x501f] |
| [ 0.688219] pci 0000:00:01.1: reg 0x20: [io 0x4c80-0x4cbf] |
| [ 0.688222] pci 0000:00:01.1: reg 0x24: [io 0x4cc0-0x4cff] |
| [ 0.688234] pci 0000:00:01.1: PME# supported from D3hot D3cold |
| [ 0.688300] pci 0000:00:02.0: [10de:005a] type 00 class 0x0c0310 |
| [ 0.688306] pci 0000:00:02.0: reg 0x10: [mem 0xfc500000-0xfc500fff] |
| [ 0.688326] pci 0000:00:02.0: supports D1 D2 |
| [ 0.688327] pci 0000:00:02.0: PME# supported from D0 D1 D2 D3hot D3cold |
| [ 0.688357] pci 0000:00:02.0: System wakeup disabled by ACPI |
| [ 0.692041] pci 0000:00:02.1: [10de:005b] type 00 class 0x0c0320 |
| [ 0.692048] pci 0000:00:02.1: reg 0x10: [mem 0xfc503000-0xfc5030ff] |
| [ 0.692073] pci 0000:00:02.1: supports D1 D2 |
| [ 0.692074] pci 0000:00:02.1: PME# supported from D0 D1 D2 D3hot D3cold |
| [ 0.692105] pci 0000:00:02.1: System wakeup disabled by ACPI |
| [ 0.696045] pci 0000:00:06.0: [10de:0053] type 00 class 0x01018a |
| [ 0.696058] pci 0000:00:06.0: reg 0x20: [io 0x5020-0x502f] |
| [ 0.696065] pci 0000:00:06.0: legacy IDE quirk: reg 0x10: [io 0x01f0-0x01f7] |
| [ 0.700005] pci 0000:00:06.0: legacy IDE quirk: reg 0x14: [io 0x03f6] |
| [ 0.704001] pci 0000:00:06.0: legacy IDE quirk: reg 0x18: [io 0x0170-0x0177] |
| [ 0.708002] pci 0000:00:06.0: legacy IDE quirk: reg 0x1c: [io 0x0376] |
| [ 0.712064] pci 0000:00:07.0: [10de:0054] type 00 class 0x010185 |
| [ 0.712070] pci 0000:00:07.0: reg 0x10: [io 0x5050-0x5057] |
| [ 0.712074] pci 0000:00:07.0: reg 0x14: [io 0x5070-0x5073] |
| [ 0.712077] pci 0000:00:07.0: reg 0x18: [io 0x5058-0x505f] |
| [ 0.712081] pci 0000:00:07.0: reg 0x1c: [io 0x5074-0x5077] |
| [ 0.712084] pci 0000:00:07.0: reg 0x20: [io 0x5030-0x503f] |
| [ 0.712088] pci 0000:00:07.0: reg 0x24: [mem 0xfc501000-0xfc501fff] |
| [ 0.712153] pci 0000:00:08.0: [10de:0055] type 00 class 0x010185 |
| [ 0.712158] pci 0000:00:08.0: reg 0x10: [io 0x5060-0x5067] |
| [ 0.712162] pci 0000:00:08.0: reg 0x14: [io 0x5078-0x507b] |
| [ 0.712165] pci 0000:00:08.0: reg 0x18: [io 0x5068-0x506f] |
| [ 0.712169] pci 0000:00:08.0: reg 0x1c: [io 0x507c-0x507f] |
| [ 0.712172] pci 0000:00:08.0: reg 0x20: [io 0x5040-0x504f] |
| [ 0.712176] pci 0000:00:08.0: reg 0x24: [mem 0xfc502000-0xfc502fff] |
| [ 0.712240] pci 0000:00:09.0: [10de:005c] type 01 class 0x060400 |
| [ 0.712280] pci 0000:00:09.0: System wakeup disabled by ACPI |
| [ 0.716042] pci 0000:00:0b.0: [10de:005d] type 01 class 0x060400 |
| [ 0.716062] pci 0000:00:0b.0: PME# supported from D0 D1 D2 D3hot D3cold |
| [ 0.716093] pci 0000:00:0b.0: System wakeup disabled by ACPI |
| [ 0.720042] pci 0000:00:0c.0: [10de:005d] type 01 class 0x060400 |
| [ 0.720062] pci 0000:00:0c.0: PME# supported from D0 D1 D2 D3hot D3cold |
| [ 0.720092] pci 0000:00:0c.0: System wakeup disabled by ACPI |
| [ 0.724042] pci 0000:00:0d.0: [10de:005d] type 01 class 0x060400 |
| [ 0.724060] pci 0000:00:0d.0: PME# supported from D0 D1 D2 D3hot D3cold |
| [ 0.724091] pci 0000:00:0d.0: System wakeup disabled by ACPI |
| [ 0.728041] pci 0000:00:0e.0: [10de:005d] type 01 class 0x060400 |
| [ 0.728060] pci 0000:00:0e.0: PME# supported from D0 D1 D2 D3hot D3cold |
| [ 0.728091] pci 0000:00:0e.0: System wakeup disabled by ACPI |
| [ 0.732047] pci 0000:00:18.0: [1022:1100] type 00 class 0x060000 |
| [ 0.732115] pci 0000:00:18.1: [1022:1101] type 00 class 0x060000 |
| [ 0.732177] pci 0000:00:18.2: [1022:1102] type 00 class 0x060000 |
| [ 0.732238] pci 0000:00:18.3: [1022:1103] type 00 class 0x060000 |
| [ 0.732303] pci 0000:00:19.0: [1022:1100] type 00 class 0x060000 |
| [ 0.732370] pci 0000:00:19.1: [1022:1101] type 00 class 0x060000 |
| [ 0.732431] pci 0000:00:19.2: [1022:1102] type 00 class 0x060000 |
| [ 0.732492] pci 0000:00:19.3: [1022:1103] type 00 class 0x060000 |
| [ 0.732593] pci 0000:01:04.0: [18ca:0020] type 00 class 0x030000 |
| [ 0.732602] pci 0000:01:04.0: reg 0x10: [mem 0xf8000000-0xfbffffff pref] |
| [ 0.732608] pci 0000:01:04.0: reg 0x14: [mem 0xfc200000-0xfc23ffff] |
| [ 0.732613] pci 0000:01:04.0: reg 0x18: [io 0x3000-0x307f] |
| [ 0.732643] pci 0000:01:04.0: supports D1 D2 |
| [ 0.732697] pci 0000:00:09.0: PCI bridge to [bus 01] |
| [ 0.736002] pci 0000:00:09.0: bridge window [io 0x3000-0x3fff] |
| [ 0.736005] pci 0000:00:09.0: bridge window [mem 0xfc200000-0xfc2fffff] |
| [ 0.736007] pci 0000:00:09.0: bridge window [mem 0xf8000000-0xfbffffff pref] |
| [ 0.736058] pci 0000:02:00.0: [14e4:1659] type 00 class 0x020000 |
| [ 0.736070] pci 0000:02:00.0: reg 0x10: [mem 0xfc300000-0xfc30ffff 64bit] |
| [ 0.736093] pci 0000:02:00.0: reg 0x30: [mem 0x0d000000-0x0d00ffff pref] |
| [ 0.736133] pci 0000:02:00.0: PME# supported from D3hot D3cold |
| [ 0.736185] pci 0000:02:00.0: disabling ASPM on pre-1.1 PCIe device. You can enable it with 'pcie_aspm=force' |
| [ 0.740007] pci 0000:00:0b.0: PCI bridge to [bus 02] |
| [ 0.744003] pci 0000:00:0b.0: bridge window [mem 0xfc300000-0xfc3fffff] |
| [ 0.744054] pci 0000:03:00.0: [14e4:1659] type 00 class 0x020000 |
| [ 0.744066] pci 0000:03:00.0: reg 0x10: [mem 0xfc400000-0xfc40ffff 64bit] |
| [ 0.744127] pci 0000:03:00.0: PME# supported from D3hot D3cold |
| [ 0.744178] pci 0000:03:00.0: disabling ASPM on pre-1.1 PCIe device. You can enable it with 'pcie_aspm=force' |
| [ 0.748005] pci 0000:00:0c.0: PCI bridge to [bus 03] |
| [ 0.752003] pci 0000:00:0c.0: bridge window [mem 0xfc400000-0xfc4fffff] |
| [ 0.752042] pci 0000:00:0d.0: PCI bridge to [bus 04] |
| [ 0.756047] pci 0000:05:00.0: [111d:8018] type 01 class 0x060400 |
| [ 0.756088] pci 0000:05:00.0: PME# supported from D0 D3hot D3cold |
| [ 0.756135] pci 0000:05:00.0: disabling ASPM on pre-1.1 PCIe device. You can enable it with 'pcie_aspm=force' |
| [ 0.760004] pci 0000:00:0e.0: PCI bridge to [bus 05-08] |
| [ 0.764002] pci 0000:00:0e.0: bridge window [io 0x1000-0x2fff] |
| [ 0.764005] pci 0000:00:0e.0: bridge window [mem 0xfc000000-0xfc1fffff] |
| [ 0.764050] pci 0000:06:00.0: [111d:8018] type 01 class 0x060400 |
| [ 0.764098] pci 0000:06:00.0: PME# supported from D0 D3hot D3cold |
| [ 0.764146] pci 0000:06:00.0: disabling ASPM on pre-1.1 PCIe device. You can enable it with 'pcie_aspm=force' |
| [ 0.768008] pci 0000:06:01.0: [111d:8018] type 01 class 0x060400 |
| [ 0.768056] pci 0000:06:01.0: PME# supported from D0 D3hot D3cold |
| [ 0.768105] pci 0000:06:00.0: disabling ASPM on pre-1.1 PCIe device. You can enable it with 'pcie_aspm=force' |
| [ 0.772020] pci 0000:05:00.0: PCI bridge to [bus 06-08] |
| [ 0.776005] pci 0000:05:00.0: bridge window [io 0x1000-0x2fff] |
| [ 0.776009] pci 0000:05:00.0: bridge window [mem 0xfc000000-0xfc1fffff] |
| [ 0.776070] pci 0000:07:00.0: [8086:10bc] type 00 class 0x020000 |
| [ 0.776082] pci 0000:07:00.0: reg 0x10: [mem 0xfc000000-0xfc01ffff] |
| [ 0.776092] pci 0000:07:00.0: reg 0x14: [mem 0xfc020000-0xfc03ffff] |
| [ 0.776101] pci 0000:07:00.0: reg 0x18: [io 0x1000-0x101f] |
| [ 0.776133] pci 0000:07:00.0: reg 0x30: [mem 0xfc040000-0xfc05ffff pref] |
| [ 0.776175] pci 0000:07:00.0: PME# supported from D0 D3hot D3cold |
| [ 0.776238] pci 0000:07:00.1: [8086:10bc] type 00 class 0x020000 |
| [ 0.776250] pci 0000:07:00.1: reg 0x10: [mem 0xfc060000-0xfc07ffff] |
| [ 0.776259] pci 0000:07:00.1: reg 0x14: [mem 0xfc080000-0xfc09ffff] |
| [ 0.776268] pci 0000:07:00.1: reg 0x18: [io 0x1020-0x103f] |
| [ 0.776300] pci 0000:07:00.1: reg 0x30: [mem 0xfc0a0000-0xfc0bffff pref] |
| [ 0.776342] pci 0000:07:00.1: PME# supported from D0 D3hot D3cold |
| [ 0.780034] pci 0000:07:00.0: disabling ASPM on pre-1.1 PCIe device. You can enable it with 'pcie_aspm=force' |
| [ 0.784009] pci 0000:06:00.0: PCI bridge to [bus 07] |
| [ 0.788005] pci 0000:06:00.0: bridge window [io 0x1000-0x1fff] |
| [ 0.788009] pci 0000:06:00.0: bridge window [mem 0xfc000000-0xfc0fffff] |
| [ 0.788072] pci 0000:08:00.0: [8086:10bc] type 00 class 0x020000 |
| [ 0.788084] pci 0000:08:00.0: reg 0x10: [mem 0xfc100000-0xfc11ffff] |
| [ 0.788094] pci 0000:08:00.0: reg 0x14: [mem 0xfc120000-0xfc13ffff] |
| [ 0.788103] pci 0000:08:00.0: reg 0x18: [io 0x2000-0x201f] |
| [ 0.788135] pci 0000:08:00.0: reg 0x30: [mem 0xfc140000-0xfc15ffff pref] |
| [ 0.788176] pci 0000:08:00.0: PME# supported from D0 D3hot |
| [ 0.788240] pci 0000:08:00.1: [8086:10bc] type 00 class 0x020000 |
| [ 0.788252] pci 0000:08:00.1: reg 0x10: [mem 0xfc160000-0xfc17ffff] |
| [ 0.788261] pci 0000:08:00.1: reg 0x14: [mem 0xfc180000-0xfc19ffff] |
| [ 0.788270] pci 0000:08:00.1: reg 0x18: [io 0x2020-0x203f] |
| [ 0.788302] pci 0000:08:00.1: reg 0x30: [mem 0xfc1a0000-0xfc1bffff pref] |
| [ 0.788344] pci 0000:08:00.1: PME# supported from D0 D3hot |
| [ 0.788400] pci 0000:08:00.0: disabling ASPM on pre-1.1 PCIe device. You can enable it with 'pcie_aspm=force' |
| [ 0.792009] pci 0000:06:01.0: PCI bridge to [bus 08] |
| [ 0.796005] pci 0000:06:01.0: bridge window [io 0x2000-0x2fff] |
| [ 0.796009] pci 0000:06:01.0: bridge window [mem 0xfc100000-0xfc1fffff] |
| [ 0.796045] pci_bus 0000:00: on NUMA node 0 |
| [ 0.796102] ACPI: PCI Interrupt Link [LNKA] (IRQs *16 17 18 19) |
| [ 0.804346] ACPI: PCI Interrupt Link [LNKB] (IRQs 16 *17 18 19) |
| [ 0.809548] ACPI: PCI Interrupt Link [LNKC] (IRQs 16 17 18 19) *0, disabled. |
| [ 0.817599] ACPI: PCI Interrupt Link [LNKD] (IRQs 16 17 18 19) *0, disabled. |
| [ 0.824247] ACPI: PCI Interrupt Link [LNKE] (IRQs 16 17 18 19) *0, disabled. |
| [ 0.832247] ACPI: PCI Interrupt Link [LLAS] (IRQs 20 21 22 23) *0, disabled. |
| [ 0.838709] ACPI: PCI Interrupt Link [LUOH] (IRQs 20 21 22 *23) |
| [ 0.841544] ACPI: PCI Interrupt Link [LUEH] (IRQs 20 21 *22 23) |
| [ 0.845548] ACPI: PCI Interrupt Link [LAUD] (IRQs 20 21 22 23) *0, disabled. |
| [ 0.850711] ACPI: PCI Interrupt Link [LMOD] (IRQs 20 21 22 23) *0, disabled. |
| [ 0.857878] ACPI: PCI Interrupt Link [LPA0] (IRQs 20 21 22 23) *0, disabled. |
| [ 0.865216] ACPI: PCI Interrupt Link [LSA0] (IRQs 20 *21 22 23) |
| [ 0.869542] ACPI: PCI Interrupt Link [LSA1] (IRQs *20 21 22 23) |
| [ 0.877191] ACPI: PCI Interrupt Link [LEMA] (IRQs 20 21 22 23) *0, disabled. |
| [ 0.884247] ACPI: PCI Interrupt Link [LUB0] (IRQs 20 21 22 23) *0, disabled. |
| [ 0.890711] ACPI: PCI Interrupt Link [LUB2] (IRQs 20 21 22 23) *0, disabled. |
| [ 0.894711] ACPI: PCI Interrupt Link [LKSM] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled. |
| [ 0.903561] ACPI: PCI Interrupt Link [LNIA] (IRQs 16) *0, disabled. |
| [ 0.905877] ACPI: PCI Interrupt Link [LNIB] (IRQs 17) *0, disabled. |
| [ 0.912246] ACPI: PCI Interrupt Link [LNIC] (IRQs 18) *0, disabled. |
| [ 0.917875] ACPI: PCI Interrupt Link [LNND] (IRQs 19) *0, disabled. |
| [ 0.925376] ACPI: Enabled 1 GPEs in block 00 to 1F |
| [ 0.928096] vgaarb: setting as boot device: PCI:0000:01:04.0 |
| [ 0.932000] vgaarb: device added: PCI:0000:01:04.0,decodes=io+mem,owns=io+mem,locks=none |
| [ 0.944008] vgaarb: loaded |
| [ 0.946716] vgaarb: bridge control possible 0000:01:04.0 |
| [ 0.952117] PCI: Using ACPI for IRQ routing |
| [ 0.956004] PCI: pci_cache_line_size set to 64 bytes |
| [ 0.956065] e820: reserve RAM buffer [mem 0x0009fc00-0x0009ffff] |
| [ 0.956067] e820: reserve RAM buffer [mem 0xbff9f000-0xbfffffff] |
| [ 0.956256] HPET: 3 timers in total, 0 timers will be used for per-cpu timer |
| [ 0.960005] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 31 |
| [ 0.968556] hpet0: 3 comparators, 32-bit 25.000000 MHz counter |
| [ 0.976040] Switched to clocksource hpet |
| [ 0.988377] pnp: PnP ACPI init |
| [ 0.991454] ACPI: bus type PNP registered |
| [ 0.995848] pnp 00:00: Plug and Play ACPI device, IDs PNP0303 PNP030b (active) |
| [ 0.995901] pnp 00:01: Plug and Play ACPI device, IDs PNP0f03 PNP0f13 (active) |
| [ 0.995958] pnp 00:02: Plug and Play ACPI device, IDs PNP0501 (active) |
| [ 0.996017] pnp 00:03: Plug and Play ACPI device, IDs PNP0501 (active) |
| [ 0.996049] pnp 00:04: [dma 2] |
| [ 0.996075] pnp 00:04: Plug and Play ACPI device, IDs PNP0700 (active) |
| [ 0.996092] pnp: PnP ACPI: found 5 devices |
| [ 1.000192] ACPI: bus type PNP unregistered |
| [ 1.011719] pci 0000:02:00.0: can't claim BAR 6 [mem 0x0d000000-0x0d00ffff pref]: no compatible bridge window |
| [ 1.021676] pci 0000:00:09.0: PCI bridge to [bus 01] |
| [ 1.026636] pci 0000:00:09.0: bridge window [io 0x3000-0x3fff] |
| [ 1.032729] pci 0000:00:09.0: bridge window [mem 0xfc200000-0xfc2fffff] |
| [ 1.039513] pci 0000:00:09.0: bridge window [mem 0xf8000000-0xfbffffff pref] |
| [ 1.046738] pci 0000:02:00.0: BAR 6: assigned [mem 0xfc310000-0xfc31ffff pref] |
| [ 1.053955] pci 0000:00:0b.0: PCI bridge to [bus 02] |
| [ 1.058918] pci 0000:00:0b.0: bridge window [mem 0xfc300000-0xfc3fffff] |
| [ 1.065706] pci 0000:00:0c.0: PCI bridge to [bus 03] |
| [ 1.070671] pci 0000:00:0c.0: bridge window [mem 0xfc400000-0xfc4fffff] |
| [ 1.077457] pci 0000:00:0d.0: PCI bridge to [bus 04] |
| [ 1.082425] pci 0000:06:00.0: PCI bridge to [bus 07] |
| [ 1.087387] pci 0000:06:00.0: bridge window [io 0x1000-0x1fff] |
| [ 1.093476] pci 0000:06:00.0: bridge window [mem 0xfc000000-0xfc0fffff] |
| [ 1.100264] pci 0000:06:01.0: PCI bridge to [bus 08] |
| [ 1.105224] pci 0000:06:01.0: bridge window [io 0x2000-0x2fff] |
| [ 1.111320] pci 0000:06:01.0: bridge window [mem 0xfc100000-0xfc1fffff] |
| [ 1.118109] pci 0000:05:00.0: PCI bridge to [bus 06-08] |
| [ 1.123328] pci 0000:05:00.0: bridge window [io 0x1000-0x2fff] |
| [ 1.129416] pci 0000:05:00.0: bridge window [mem 0xfc000000-0xfc1fffff] |
| [ 1.136205] pci 0000:00:0e.0: PCI bridge to [bus 05-08] |
| [ 1.141424] pci 0000:00:0e.0: bridge window [io 0x1000-0x2fff] |
| [ 1.147517] pci 0000:00:0e.0: bridge window [mem 0xfc000000-0xfc1fffff] |
| [ 1.154306] pci_bus 0000:00: resource 4 [io 0x0d00-0x5fff] |
| [ 1.154308] pci_bus 0000:00: resource 5 [mem 0xf8000000-0xfbffffff] |
| [ 1.154310] pci_bus 0000:00: resource 6 [mem 0xfc000000-0xfc5fffff] |
| [ 1.154312] pci_bus 0000:00: resource 7 [mem 0x000a0000-0x000bffff] |
| [ 1.154314] pci_bus 0000:00: resource 8 [io 0x0000-0x0cf7] |
| [ 1.154316] pci_bus 0000:01: resource 0 [io 0x3000-0x3fff] |
| [ 1.154318] pci_bus 0000:01: resource 1 [mem 0xfc200000-0xfc2fffff] |
| [ 1.154320] pci_bus 0000:01: resource 2 [mem 0xf8000000-0xfbffffff pref] |
| [ 1.154322] pci_bus 0000:02: resource 1 [mem 0xfc300000-0xfc3fffff] |
| [ 1.154325] pci_bus 0000:03: resource 1 [mem 0xfc400000-0xfc4fffff] |
| [ 1.154327] pci_bus 0000:05: resource 0 [io 0x1000-0x2fff] |
| [ 1.154329] pci_bus 0000:05: resource 1 [mem 0xfc000000-0xfc1fffff] |
| [ 1.154331] pci_bus 0000:06: resource 0 [io 0x1000-0x2fff] |
| [ 1.154333] pci_bus 0000:06: resource 1 [mem 0xfc000000-0xfc1fffff] |
| [ 1.154335] pci_bus 0000:07: resource 0 [io 0x1000-0x1fff] |
| [ 1.154337] pci_bus 0000:07: resource 1 [mem 0xfc000000-0xfc0fffff] |
| [ 1.154339] pci_bus 0000:08: resource 0 [io 0x2000-0x2fff] |
| [ 1.154341] pci_bus 0000:08: resource 1 [mem 0xfc100000-0xfc1fffff] |
| [ 1.154417] NET: Registered protocol family 2 |
| [ 1.159095] TCP established hash table entries: 32768 (order: 6, 262144 bytes) |
| [ 1.166525] TCP bind hash table entries: 32768 (order: 7, 524288 bytes) |
| [ 1.173444] TCP: Hash tables configured (established 32768 bind 32768) |
| [ 1.180066] TCP: reno registered |
| [ 1.183299] UDP hash table entries: 2048 (order: 4, 65536 bytes) |
| [ 1.189353] UDP-Lite hash table entries: 2048 (order: 4, 65536 bytes) |
| [ 1.195960] NET: Registered protocol family 1 |
| [ 1.200604] ACPI: PCI Interrupt Link [LUB0] enabled at IRQ 23 |
| [ 1.206576] ACPI: PCI Interrupt Link [LUB2] enabled at IRQ 22 |
| [ 1.212417] pci 0000:00:00.0: Found enabled HT MSI Mapping |
| [ 1.217924] pci 0000:00:00.0: Found enabled HT MSI Mapping |
| [ 1.223404] pci 0000:00:0b.0: Found disabled HT MSI Mapping |
| [ 1.228980] pci 0000:00:00.0: Found enabled HT MSI Mapping |
| [ 1.234488] pci 0000:00:00.0: Found enabled HT MSI Mapping |
| [ 1.239975] pci 0000:00:0c.0: Found disabled HT MSI Mapping |
| [ 1.245551] pci 0000:00:00.0: Found enabled HT MSI Mapping |
| [ 1.251062] pci 0000:00:00.0: Found enabled HT MSI Mapping |
| [ 1.256546] pci 0000:00:0d.0: Found disabled HT MSI Mapping |
| [ 1.262120] pci 0000:00:00.0: Found enabled HT MSI Mapping |
| [ 1.267635] pci 0000:00:00.0: Found enabled HT MSI Mapping |
| [ 1.273117] pci 0000:00:0e.0: Found disabled HT MSI Mapping |
| [ 1.278690] pci 0000:00:00.0: Found enabled HT MSI Mapping |
| [ 1.284193] pci 0000:01:04.0: Video device with shadowed ROM |
| [ 1.284218] PCI: CLS 64 bytes, default 64 |
| [ 1.284298] Unpacking initramfs... |
| [ 1.557075] Freeing initrd memory: 14028K (ffff88007f24c000 - ffff88007ffff000) |
| [ 1.564812] PCI-DMA: Disabling AGP. |
| [ 1.568453] PCI-DMA: aperture base @ b4000000 size 65536 KB |
| [ 1.574024] PCI-DMA: using GART IOMMU. |
| [ 1.577777] PCI-DMA: Reserving 64MB of IOMMU area in the AGP aperture |
| [ 1.587949] platform rtc_cmos: registered platform RTC device (no PNP device found) |
| [ 1.595772] microcode: AMD CPU family 0xf not supported |
| [ 1.601468] futex hash table entries: 1024 (order: 4, 65536 bytes) |
| [ 1.607717] audit: initializing netlink subsys (disabled) |
| [ 1.613151] audit: type=2000 audit(1461694141.612:1): initialized |
| [ 1.619683] HugeTLB registered 2 MB page size, pre-allocated 0 pages |
| [ 1.626056] zbud: loaded |
| [ 1.628798] VFS: Disk quotas dquot_6.5.2 |
| [ 1.632742] Dquot-cache hash table entries: 512 (order 0, 4096 bytes) |
| [ 1.639251] msgmni has been set to 7926 |
| [ 1.643525] alg: No test for stdrng (krng) |
| [ 1.647675] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252) |
| [ 1.655141] io scheduler noop registered |
| [ 1.659069] io scheduler deadline registered |
| [ 1.663386] io scheduler cfq registered (default) |
| [ 1.668398] pci_hotplug: PCI Hot Plug PCI Core version: 0.5 |
| [ 1.673987] pciehp: PCI Express Hot Plug Controller Driver version: 0.4 |
| [ 1.680659] GHES: HEST is not enabled! |
| [ 1.684498] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled |
| [ 1.711034] 00:02: ttyS0 at I/O 0x3f8 (irq = 4, base_baud = 115200) is a 16550A |
| [ 1.738645] 00:03: ttyS1 at I/O 0x2f8 (irq = 3, base_baud = 115200) is a 16550A |
| [ 1.746383] Linux agpgart interface v0.103 |
| [ 1.750592] i8042: PNP: PS/2 Controller [PNP0303:KBD,PNP0f03:MOU] at 0x60,0x64 irq 1,12 |
| [ 1.760909] serio: i8042 KBD port at 0x60,0x64 irq 1 |
| [ 1.765882] serio: i8042 AUX port at 0x60,0x64 irq 12 |
| [ 1.771161] mousedev: PS/2 mouse device common for all mice |
| [ 1.776826] rtc_cmos rtc_cmos: RTC can wake from S4 |
| [ 1.781912] rtc_cmos rtc_cmos: rtc core: registered rtc_cmos as rtc0 |
| [ 1.788288] rtc_cmos rtc_cmos: alarms up to one year, y3k, 114 bytes nvram, hpet irqs |
| [ 1.796132] ledtrig-cpu: registered to indicate activity on CPUs |
| [ 1.802236] AMD IOMMUv2 driver by Joerg Roedel <joerg.roedel@amd.com> |
| [ 1.808675] AMD IOMMUv2 functionality not available on this system |
| [ 1.814960] TCP: cubic registered |
| [ 1.818345] NET: Registered protocol family 10 |
| [ 1.823089] mip6: Mobile IPv6 |
| [ 1.826062] NET: Registered protocol family 17 |
| [ 1.830507] mpls_gso: MPLS GSO support |
| [ 1.834691] registered taskstats version 1 |
| [ 1.839394] rtc_cmos rtc_cmos: setting system clock to 2016-04-26 18:09:03 UTC (1461694143) |
| [ 1.847804] PM: Hibernation image not present or could not be loaded. |
| [ 1.849086] Freeing unused kernel memory: 1204K (ffffffff818ee000 - ffffffff81a1b000) |
| [ 1.856920] Write protecting the kernel read-only data: 8192k |
| [ 1.865066] Freeing unused kernel memory: 924K (ffff880001519000 - ffff880001600000) |
| [ 1.873353] Freeing unused kernel memory: 216K (ffff8800017ca000 - ffff880001800000) |
| [ 1.892344] systemd-udevd[72]: starting version 215 |
| [ 1.897626] random: systemd-udevd urandom read with 3 bits of entropy available |
| [ 1.915180] pps_core: LinuxPPS API ver. 1 registered |
| [ 1.920166] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it> |
| [ 1.928894] FDC 0 is a post-1991 82077 |
| [ 1.933246] ACPI: bus type USB registered |
| [ 1.937319] usbcore: registered new interface driver usbfs |
| [ 1.937348] PTP clock support registered |
| [ 1.946746] usbcore: registered new interface driver hub |
| [ 1.952611] SCSI subsystem initialized |
| [ 1.956634] tg3.c:v3.137 (May 11, 2014) |
| [ 1.960502] tg3 0000:02:00.0: enabling device (0004 -> 0006) |
| [ 1.965137] usbcore: registered new device driver usb |
| [ 1.971404] e1000e: Intel(R) PRO/1000 Network Driver - 2.3.2-k |
| [ 1.972070] ACPI: PCI Interrupt Link [LNIB] enabled at IRQ 17 |
| [ 1.982977] e1000e: Copyright(c) 1999 - 2014 Intel Corporation. |
| [ 1.989090] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver |
| [ 1.989239] ACPI: PCI Interrupt Link [LNND] enabled at IRQ 19 |
| [ 1.989379] e1000e 0000:07:00.0: Interrupt Throttling Rate (ints/sec) set to dynamic conservative mode |
| [ 1.989410] e1000e 0000:07:00.0: irq 40 for MSI/MSI-X |
| [ 2.011093] ehci-pci: EHCI PCI platform driver |
| [ 2.011111] libata version 3.00 loaded. |
| [ 2.016075] ehci-pci 0000:00:02.1: EHCI Host Controller |
| [ 2.021308] ehci-pci 0000:00:02.1: new USB bus registered, assigned bus number 1 |
| [ 2.028740] ehci-pci 0000:00:02.1: debug port 1 |
| [ 2.029228] tg3 0000:02:00.0 eth0: Tigon3 [partno(BCM95721) rev 4201] (PCI Express) MAC address 00:23:54:37:d4:d3 |
| [ 2.029231] tg3 0000:02:00.0 eth0: attached PHY is 5750 (10/100/1000Base-T Ethernet) (WireSpeed[1], EEE[0]) |
| [ 2.029233] tg3 0000:02:00.0 eth0: RXcsums[1] LinkChgREG[0] MIirq[0] ASF[0] TSOcap[1] |
| [ 2.029234] tg3 0000:02:00.0 eth0: dma_rwctrl[76180000] dma_mask[64-bit] |
| [ 2.029306] tg3 0000:03:00.0: enabling device (0004 -> 0006) |
| [ 2.029440] ACPI: PCI Interrupt Link [LNIA] enabled at IRQ 16 |
| [ 2.079198] ehci-pci 0000:00:02.1: cache line size of 64 is not supported |
| [ 2.079223] ehci-pci 0000:00:02.1: irq 22, io mem 0xfc503000 |
| [ 2.079295] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver |
| [ 2.100013] ehci-pci 0000:00:02.1: USB 2.0 started, EHCI 1.00 |
| [ 2.105799] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002 |
| [ 2.111727] tg3 0000:03:00.0 eth1: Tigon3 [partno(BCM95721) rev 4201] (PCI Express) MAC address 00:23:54:37:d5:e9 |
| [ 2.111729] tg3 0000:03:00.0 eth1: attached PHY is 5750 (10/100/1000Base-T Ethernet) (WireSpeed[1], EEE[0]) |
| [ 2.111730] tg3 0000:03:00.0 eth1: RXcsums[1] LinkChgREG[0] MIirq[0] ASF[0] TSOcap[1] |
| [ 2.111731] tg3 0000:03:00.0 eth1: dma_rwctrl[76180000] dma_mask[64-bit] |
| [ 2.136568] e1000e 0000:07:00.0 eth2: (PCI Express:2.5GT/s:Width x4) 00:15:17:4e:46:c9 |
| [ 2.136570] e1000e 0000:07:00.0 eth2: Intel(R) PRO/1000 Network Connection |
| [ 2.136643] e1000e 0000:07:00.0 eth2: MAC: 0, PHY: 4, PBA No: D72468-003 |
| [ 2.136852] ACPI: PCI Interrupt Link [LNIC] enabled at IRQ 18 |
| [ 2.136968] e1000e 0000:07:00.1: Interrupt Throttling Rate (ints/sec) set to dynamic conservative mode |
| [ 2.136996] e1000e 0000:07:00.1: irq 41 for MSI/MSI-X |
| [ 2.183596] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 |
| [ 2.190830] usb usb1: Product: EHCI Host Controller |
| [ 2.195708] usb usb1: Manufacturer: Linux 3.16.0-4-amd64 ehci_hcd |
| [ 2.201798] usb usb1: SerialNumber: 0000:00:02.1 |
| [ 2.206595] hub 1-0:1.0: USB hub found |
| [ 2.210358] hub 1-0:1.0: 10 ports detected |
| [ 2.214720] pata_amd 0000:00:06.0: version 0.4.1 |
| [ 2.215050] ohci-pci: OHCI PCI platform driver |
| [ 2.215428] scsi0 : pata_amd |
| [ 2.222585] scsi1 : pata_amd |
| [ 2.225552] ata1: PATA max UDMA/133 cmd 0x1f0 ctl 0x3f6 bmdma 0x5020 irq 14 |
| [ 2.232510] ata2: PATA max UDMA/133 cmd 0x170 ctl 0x376 bmdma 0x5028 irq 15 |
| [ 2.239522] sata_nv 0000:00:07.0: version 3.5 |
| [ 2.239686] ACPI: PCI Interrupt Link [LSA0] enabled at IRQ 21 |
| [ 2.245797] scsi2 : sata_nv |
| [ 2.248721] scsi3 : sata_nv |
| [ 2.251565] ata3: SATA max UDMA/133 cmd 0x5050 ctl 0x5070 bmdma 0x5030 irq 21 |
| [ 2.258690] ata4: SATA max UDMA/133 cmd 0x5058 ctl 0x5074 bmdma 0x5038 irq 21 |
| [ 2.265935] ACPI: PCI Interrupt Link [LSA1] enabled at IRQ 20 |
| [ 2.271977] scsi4 : sata_nv |
| [ 2.274894] scsi5 : sata_nv |
| [ 2.277765] ata5: SATA max UDMA/133 cmd 0x5060 ctl 0x5078 bmdma 0x5040 irq 20 |
| [ 2.284897] ata6: SATA max UDMA/133 cmd 0x5068 ctl 0x507c bmdma 0x5048 irq 20 |
| [ 2.292204] ohci-pci 0000:00:02.0: OHCI PCI host controller |
| [ 2.297787] ohci-pci 0000:00:02.0: new USB bus registered, assigned bus number 2 |
| [ 2.305221] ohci-pci 0000:00:02.0: irq 23, io mem 0xfc500000 |
| [ 2.315712] e1000e 0000:07:00.1 eth3: (PCI Express:2.5GT/s:Width x4) 00:15:17:4e:46:c8 |
| [ 2.323621] e1000e 0000:07:00.1 eth3: Intel(R) PRO/1000 Network Connection |
| [ 2.330571] e1000e 0000:07:00.1 eth3: MAC: 0, PHY: 4, PBA No: D72468-003 |
| [ 2.337444] e1000e 0000:08:00.0: Interrupt Throttling Rate (ints/sec) set to dynamic conservative mode |
| [ 2.346767] e1000e 0000:08:00.0: irq 42 for MSI/MSI-X |
| [ 2.366042] usb usb2: New USB device found, idVendor=1d6b, idProduct=0001 |
| [ 2.372821] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1 |
| [ 2.380037] usb usb2: Product: OHCI PCI host controller |
| [ 2.385255] usb usb2: Manufacturer: Linux 3.16.0-4-amd64 ohci_hcd |
| [ 2.391348] usb usb2: SerialNumber: 0000:00:02.0 |
| [ 2.396133] hub 2-0:1.0: USB hub found |
| [ 2.399893] hub 2-0:1.0: 10 ports detected |
| [ 2.524820] e1000e 0000:08:00.0 eth4: (PCI Express:2.5GT/s:Width x4) 00:15:17:4e:46:cb |
| [ 2.532732] e1000e 0000:08:00.0 eth4: Intel(R) PRO/1000 Network Connection |
| [ 2.539679] e1000e 0000:08:00.0 eth4: MAC: 0, PHY: 4, PBA No: D72468-003 |
| [ 2.546542] e1000e 0000:08:00.1: Interrupt Throttling Rate (ints/sec) set to dynamic conservative mode |
| [ 2.555868] e1000e 0000:08:00.1: irq 43 for MSI/MSI-X |
| [ 2.576018] ata3: SATA link down (SStatus 0 SControl 300) |
| [ 2.604013] ata5: SATA link down (SStatus 0 SControl 300) |
| [ 2.728774] e1000e 0000:08:00.1 eth5: (PCI Express:2.5GT/s:Width x4) 00:15:17:4e:46:ca |
| [ 2.736684] e1000e 0000:08:00.1 eth5: Intel(R) PRO/1000 Network Connection |
| [ 2.743631] e1000e 0000:08:00.1 eth5: MAC: 0, PHY: 4, PBA No: D72468-003 |
| [ 2.892013] ata4: SATA link down (SStatus 0 SControl 300) |
| [ 3.208014] ata6: SATA link down (SStatus 0 SControl 300) |
| [ 3.223227] FS-Cache: Loaded |
| [ 3.229448] RPC: Registered named UNIX socket transport module. |
| [ 3.236570] RPC: Registered udp transport module. |
| [ 3.242672] RPC: Registered tcp transport module. |
| [ 3.248744] RPC: Registered tcp NFSv4.1 backchannel transport module. |
| [ 3.260107] FS-Cache: Netfs 'nfs' registered for caching |
| [ 3.272658] tg3 0000:02:00.0: irq 44 for MSI/MSI-X |
| [ 3.320081] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready |
| [ 4.898112] tg3 0000:02:00.0 eth0: Link is up at 100 Mbps, full duplex |
| [ 4.901341] tg3 0000:02:00.0 eth0: Flow control is on for TX and on for RX |
| [ 4.901341] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready |
| [ 5.770362] systemd[1]: systemd 215 running in system mode. (+PAM +AUDIT +SELINUX +IMA +SYSVINIT +LIBCRYPTSETUP +GCRYPT +ACL +XZ -SECCOMP -APPARMOR) |
| [ 5.783838] systemd[1]: Detected architecture 'x86-64'. |
| [ 6.001291] systemd[1]: Inserted module 'autofs4' |
| [ 6.006796] systemd[1]: Set hostname to <cb-test-tgt>. |
| [ 6.083972] random: nonblocking pool is initialized |
| [ 6.225155] systemd[1]: Cannot add dependency job for unit dbus.socket, ignoring: Unit dbus.socket failed to load: No such file or directory. |
| [ 6.237894] systemd[1]: Cannot add dependency job for unit display-manager.service, ignoring: Unit display-manager.service failed to load: No such file or directory. |
| [ 6.253131] systemd[1]: Starting Forward Password Requests to Wall Directory Watch. |
| [ 6.260868] systemd[1]: Started Forward Password Requests to Wall Directory Watch. |
| [ 6.268446] systemd[1]: Expecting device dev-ttyS0.device... |
| [ 6.284137] systemd[1]: Starting Remote File Systems (Pre). |
| [ 6.300076] systemd[1]: Reached target Remote File Systems (Pre). |
| [ 6.306209] systemd[1]: Starting Arbitrary Executable File Formats File System Automount Point. |
| [ 6.328060] systemd[1]: Set up automount Arbitrary Executable File Formats File System Automount Point. |
| [ 6.337496] systemd[1]: Starting Dispatch Password Requests to Console Directory Watch. |
| [ 6.345583] systemd[1]: Started Dispatch Password Requests to Console Directory Watch. |
| [ 6.353500] systemd[1]: Starting Paths. |
| [ 6.368100] systemd[1]: Reached target Paths. |
| [ 6.372484] systemd[1]: Starting Encrypted Volumes. |
| [ 6.388056] systemd[1]: Reached target Encrypted Volumes. |
| [ 6.393466] systemd[1]: Starting Swap. |
| [ 6.408043] systemd[1]: Reached target Swap. |
| [ 6.412325] systemd[1]: Starting Root Slice. |
| [ 6.424046] systemd[1]: Created slice Root Slice. |
| [ 6.428763] systemd[1]: Starting User and Session Slice. |
| [ 6.444055] systemd[1]: Created slice User and Session Slice. |
| [ 6.449821] systemd[1]: Starting Delayed Shutdown Socket. |
| [ 6.464056] systemd[1]: Listening on Delayed Shutdown Socket. |
| [ 6.469822] systemd[1]: Starting /dev/initctl Compatibility Named Pipe. |
| [ 6.488046] systemd[1]: Listening on /dev/initctl Compatibility Named Pipe. |
| [ 6.495019] systemd[1]: Starting Journal Socket (/dev/log). |
| [ 6.512055] systemd[1]: Listening on Journal Socket (/dev/log). |
| [ 6.518005] systemd[1]: Starting udev Kernel Socket. |
| [ 6.532056] systemd[1]: Listening on udev Kernel Socket. |
| [ 6.537394] systemd[1]: Starting udev Control Socket. |
| [ 6.552042] systemd[1]: Listening on udev Control Socket. |
| [ 6.557458] systemd[1]: Starting Journal Socket. |
| [ 6.572042] systemd[1]: Listening on Journal Socket. |
| [ 6.577029] systemd[1]: Starting System Slice. |
| [ 6.592045] systemd[1]: Created slice System Slice. |
| [ 6.596932] systemd[1]: Starting system-getty.slice. |
| [ 6.612046] systemd[1]: Created slice system-getty.slice. |
| [ 6.617453] systemd[1]: Starting system-serial\x2dgetty.slice. |
| [ 6.632054] systemd[1]: Created slice system-serial\x2dgetty.slice. |
| [ 6.638360] systemd[1]: Starting Increase datagram queue length... |
| [ 6.656645] systemd[1]: Mounting Huge Pages File System... |
| [ 6.672693] systemd[1]: Starting udev Coldplug all Devices... |
| [ 6.882283] systemd[1]: Starting Load Kernel Modules... |
| [ 6.896625] systemd[1]: Mounting POSIX Message Queue File System... |
| [ 6.939079] systemd[1]: Started Set Up Additional Binary Formats. |
| [ 6.945330] systemd[1]: Mounting Debug File System... |
| [ 6.960789] systemd[1]: Starting Create list of required static device nodes for the current kernel... |
| [ 6.984441] systemd[1]: Starting Slices. |
| [ 6.996049] systemd[1]: Reached target Slices. |
| [ 7.000515] systemd[1]: Starting Remount Root and Kernel File Systems... |
| [ 7.024069] systemd[1]: Mounted Debug File System. |
| [ 7.040106] systemd[1]: Mounted POSIX Message Queue File System. |
| [ 7.056054] systemd[1]: Mounted Huge Pages File System. |
| [ 7.072048] systemd[1]: Started Increase datagram queue length. |
| [ 7.088125] systemd[1]: Started Load Kernel Modules. |
| [ 7.108054] systemd[1]: Started Create list of required static device nodes for the current kernel. |
| [ 7.128123] systemd[1]: Started Remount Root and Kernel File Systems. |
| [ 7.144063] systemd[1]: Started udev Coldplug all Devices. |
| [ 7.174911] systemd[1]: Started Various fixups to make systemd work better on Debian. |
| [ 7.182772] systemd[1]: Starting Load/Save Random Seed... |
| [ 7.196831] systemd[1]: Starting Create Static Device Nodes in /dev... |
| [ 7.212743] systemd[1]: Mounted Configuration File System. |
| [ 7.218338] systemd[1]: Starting Apply Kernel Variables... |
| [ 7.232775] systemd[1]: Mounted FUSE Control File System. |
| [ 7.238250] systemd[1]: Starting Syslog Socket. |
| [ 7.252065] systemd[1]: Listening on Syslog Socket. |
| [ 7.257013] systemd[1]: Starting Sockets. |
| [ 7.268110] systemd[1]: Reached target Sockets. |
| [ 7.272692] systemd[1]: Starting Journal Service... |
| [ 7.296069] systemd[1]: Started Journal Service. |
| [ 7.482438] systemd-udevd[173]: starting version 215 |
| [ 7.677034] systemd-journald[171]: Received request to flush runtime journal from PID 1 |
| [ 8.180777] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input2 |
| [ 8.189417] ACPI: Power Button [PWRB] |
| [ 8.193194] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input3 |
| [ 8.200655] ACPI: Power Button [PWRF] |
| [ 8.205038] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4 |
| [ 8.212803] k8temp 0000:00:18.3: Temperature readouts might be wrong - check erratum #141 |
| [ 8.221246] k8temp 0000:00:19.3: Temperature readouts might be wrong - check erratum #141 |
| [ 8.229610] EDAC MC: Ver: 3.0.0 |
| [ 8.233275] systemd-udevd[199]: renamed network interface eth1 to rename3 |
| [ 8.241076] i2c i2c-0: nForce2 SMBus adapter at 0x4c80 |
| [ 8.246511] MCE: In-kernel MCE decoding enabled. |
| [ 8.247378] i2c i2c-1: nForce2 SMBus adapter at 0x4cc0 |
| [ 8.268160] systemd-udevd[203]: renamed network interface eth2 to eth6 |
| [ 8.308741] systemd-udevd[199]: renamed network interface eth1 to eth2 |
| [ 8.318280] AMD64 EDAC driver v3.4.0 |
| [ 8.321954] EDAC amd64: DRAM ECC enabled. |
| [ 8.326108] EDAC amd64: K8 revF or later detected (node 0). |
| [ 8.331781] EDAC MC: DCT0 chip selects: |
| [ 8.331782] EDAC amd64: MC: 0: 0MB 1: 0MB |
| [ 8.331965] input: PC Speaker as /devices/platform/pcspkr/input/input4 |
| [ 8.343013] EDAC amd64: MC: 2: 0MB 3: 0MB |
| [ 8.348052] EDAC amd64: MC: 4: 1024MB 5: 1024MB |
| [ 8.352762] EDAC amd64: MC: 6: 1024MB 7: 1024MB |
| [ 8.357742] EDAC amd64: CS4: Registered DDR2 RAM |
| [ 8.362370] EDAC amd64: CS5: Registered DDR2 RAM |
| [ 8.367047] EDAC amd64: CS6: Registered DDR2 RAM |
| [ 8.371669] EDAC amd64: CS7: Registered DDR2 RAM |
| [ 8.376734] EDAC MC0: Giving out device to module amd64_edac controller K8: DEV 0000:00:18.2 (INTERRUPT) |
| [ 8.386235] EDAC amd64: DRAM ECC disabled. |
| [ 8.390339] EDAC amd64: ECC disabled in the BIOS or no ECC capability, module will not load. |
| Either enable ECC checking or force module loading by setting 'ecc_enable_override'. |
| (Note that use of the override may cause unknown side effects.) |
| [ 8.415035] EDAC PCI0: Giving out device to module amd64_edac controller EDAC PCI controller: DEV 0000:00:18.2 (POLLED) |
| [ 8.416068] kvm: Nested Virtualization enabled |
| [ 8.440229] powernow_k8: fid 0x16 (3000 MHz), vid 0xa |
| [ 8.445296] powernow_k8: fid 0x14 (2800 MHz), vid 0xc |
| [ 8.450349] powernow_k8: fid 0x12 (2600 MHz), vid 0xe |
| [ 8.455402] powernow_k8: fid 0x10 (2400 MHz), vid 0x10 |
| [ 8.460546] powernow_k8: fid 0xe (2200 MHz), vid 0x12 |
| [ 8.465607] powernow_k8: fid 0xc (2000 MHz), vid 0x12 |
| [ 8.470666] powernow_k8: fid 0x2 (1000 MHz), vid 0x12 |
| [ 8.476385] powernow_k8: fid 0x16 (3000 MHz), vid 0xa |
| [ 8.481476] powernow_k8: fid 0x14 (2800 MHz), vid 0xc |
| [ 8.486531] powernow_k8: fid 0x12 (2600 MHz), vid 0xe |
| [ 8.491582] powernow_k8: fid 0x10 (2400 MHz), vid 0x10 |
| [ 8.496722] powernow_k8: fid 0xe (2200 MHz), vid 0x12 |
| [ 8.501774] powernow_k8: fid 0xc (2000 MHz), vid 0x12 |
| [ 8.506827] powernow_k8: fid 0x2 (1000 MHz), vid 0x12 |
| [ 8.511919] powernow_k8: Found 1 Dual-Core AMD Opteron(tm) Processor 8222 (4 cpu cores) (version 2.20.00) |
| [ 9.404416] Installing knfsd (copyright (C) 1996 okir@monad.swb.de). |
| [ 39.787032] *****RAPTOR ENGINEERING AUTOMATED TEST BOOT SUCCESS***** |