| [ 0.000000] Initializing cgroup subsys cpuset |
| [ 0.000000] Initializing cgroup subsys cpu |
| [ 0.000000] Initializing cgroup subsys cpuacct |
| [ 0.000000] Linux version 3.16.0-4-amd64 (debian-kernel@lists.debian.org) (gcc version 4.8.4 (Debian 4.8.4-1) ) #1 SMP Debian 3.16.7-ckt7-1 (2015-03-01) |
| [ 0.000000] Command line: root=/dev/nfs initrd=initrd-cb-test-tgt rootfstype=nfs nfsroot=10.100.1.100:/nfsroots/cb-test-tgt-03,v3,hard,nointr,tcp ip=10.100.1.12::10.100.1.1:255.255.255.0:embed-o-matic:eth0:off console=ttyS0,115200n8 consoleblank=0 rw BOOT_IMAGE=vmlinuz-cb-test-tgt |
| [ 0.000000] e820: BIOS-provided physical RAM map: |
| [ 0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009fbff] usable |
| [ 0.000000] BIOS-e820: [mem 0x000000000009fc00-0x000000000009ffff] reserved |
| [ 0.000000] BIOS-e820: [mem 0x00000000000f0000-0x00000000000fffff] reserved |
| [ 0.000000] BIOS-e820: [mem 0x0000000000100000-0x00000000bff9ffff] usable |
| [ 0.000000] BIOS-e820: [mem 0x00000000bffa0000-0x00000000bfffffff] reserved |
| [ 0.000000] BIOS-e820: [mem 0x0000000100000000-0x000000013fffffff] usable |
| [ 0.000000] NX (Execute Disable) protection: active |
| [ 0.000000] SMBIOS 2.7 present. |
| [ 0.000000] DMI: ASUS KFSN4-DRE/KFSN4-DRE, BIOS RAPTOR-NORMAL 01/15/2016 |
| [ 0.000000] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved |
| [ 0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable |
| [ 0.000000] AGP: No AGP bridge found |
| [ 0.000000] e820: last_pfn = 0x140000 max_arch_pfn = 0x400000000 |
| [ 0.000000] MTRR default type: uncachable |
| [ 0.000000] MTRR fixed ranges enabled: |
| [ 0.000000] 00000-9FFFF write-back |
| [ 0.000000] A0000-BFFFF uncachable |
| [ 0.000000] C0000-FFFFF write-back |
| [ 0.000000] MTRR variable ranges enabled: |
| [ 0.000000] 0 base 0000000000 mask FF80000000 write-back |
| [ 0.000000] 1 base 0080000000 mask FFC0000000 write-back |
| [ 0.000000] 2 base 00F8000000 mask FFFC000000 write-combining |
| [ 0.000000] 3 disabled |
| [ 0.000000] 4 disabled |
| [ 0.000000] 5 disabled |
| [ 0.000000] 6 disabled |
| [ 0.000000] 7 disabled |
| [ 0.000000] TOM2: 0000000140000000 aka 5120M |
| [ 0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106 |
| [ 0.000000] e820: last_pfn = 0xbffa0 max_arch_pfn = 0x400000000 |
| [ 0.000000] found SMP MP-table at [mem 0x000f0b10-0x000f0b1f] mapped at [ffff8800000f0b10] |
| [ 0.000000] Base memory trampoline at [ffff880000099000] 99000 size 24576 |
| [ 0.000000] init_memory_mapping: [mem 0x00000000-0x000fffff] |
| [ 0.000000] [mem 0x00000000-0x000fffff] page 4k |
| [ 0.000000] BRK [0x01af3000, 0x01af3fff] PGTABLE |
| [ 0.000000] BRK [0x01af4000, 0x01af4fff] PGTABLE |
| [ 0.000000] BRK [0x01af5000, 0x01af5fff] PGTABLE |
| [ 0.000000] init_memory_mapping: [mem 0x13fe00000-0x13fffffff] |
| [ 0.000000] [mem 0x13fe00000-0x13fffffff] page 2M |
| [ 0.000000] BRK [0x01af6000, 0x01af6fff] PGTABLE |
| [ 0.000000] init_memory_mapping: [mem 0x13c000000-0x13fdfffff] |
| [ 0.000000] [mem 0x13c000000-0x13fdfffff] page 2M |
| [ 0.000000] init_memory_mapping: [mem 0x100000000-0x13bffffff] |
| [ 0.000000] [mem 0x100000000-0x13bffffff] page 2M |
| [ 0.000000] init_memory_mapping: [mem 0x00100000-0xbff9ffff] |
| [ 0.000000] [mem 0x00100000-0x001fffff] page 4k |
| [ 0.000000] [mem 0x00200000-0xbfdfffff] page 2M |
| [ 0.000000] [mem 0xbfe00000-0xbff9ffff] page 4k |
| [ 0.000000] RAMDISK: [mem 0x7f775000-0x7fffefff] |
| [ 0.000000] ACPI: Early table checksum verification disabled |
| [ 0.000000] ACPI: RSDP 0x00000000000F0CB0 000024 (v02 CORE ) |
| [ 0.000000] ACPI: XSDT 0x00000000BFFB90E0 00006C (v01 CORE COREBOOT 00000000 CORE 00000000) |
| [ 0.000000] ACPI: FACP 0x00000000BFFBB8D0 000074 (v01 CORE COREBOOT 00000000 CORE 00000000) |
| [ 0.000000] ACPI: DSDT 0x00000000BFFB9280 002648 (v02 ASUS COREBOOT 00000001 INTL 20150619) |
| [ 0.000000] ACPI: FACS 0x00000000BFFB9240 000040 |
| [ 0.000000] ACPI: SSDT 0x00000000BFFBB9D0 0006BD (v02 CORE COREBOOT 0000002A CORE 0000002A) |
| [ 0.000000] ACPI: TCPA 0x00000000BFFBC090 000032 (v02 CORE COREBOOT 00000000 CORE 00000000) |
| [ 0.000000] ACPI: APIC 0x00000000BFFBC0D0 00008E (v01 CORE COREBOOT 00000000 CORE 00000000) |
| [ 0.000000] ACPI: SRAT 0x00000000BFFBC160 0000E8 (v01 CORE COREBOOT 00000000 CORE 00000000) |
| [ 0.000000] ACPI: SLIT 0x00000000BFFBC250 000030 (v01 CORE COREBOOT 00000000 CORE 00000000) |
| [ 0.000000] ACPI: HPET 0x00000000BFFBC280 000038 (v01 CORE COREBOOT 00000000 CORE 00000000) |
| [ 0.000000] ACPI: SRAT 0x00000000BFFBC2C0 0000E8 (v01 CORE COREBOOT 00000000 CORE 00000000) |
| [ 0.000000] ACPI: SLIT 0x00000000BFFBC3B0 000030 (v01 CORE COREBOOT 00000000 CORE 00000000) |
| [ 0.000000] ACPI: Local APIC address 0xfee00000 |
| [ 0.000000] SRAT: PXM 0 -> APIC 0x10 -> Node 0 |
| [ 0.000000] SRAT: PXM 0 -> APIC 0x11 -> Node 0 |
| [ 0.000000] SRAT: PXM 1 -> APIC 0x12 -> Node 1 |
| [ 0.000000] SRAT: PXM 1 -> APIC 0x13 -> Node 1 |
| [ 0.000000] SRAT: Node 0 PXM 0 [mem 0x00000000-0x0009ffff] |
| [ 0.000000] SRAT: Node 0 PXM 0 [mem 0x00100000-0xbfffffff] |
| [ 0.000000] SRAT: Node 0 PXM 0 [mem 0x100000000-0x13fffffff] |
| [ 0.000000] NUMA: Initialized distance table, cnt=2 |
| [ 0.000000] NUMA: Node 0 [mem 0x00000000-0x0009ffff] + [mem 0x00100000-0xbfffffff] -> [mem 0x00000000-0xbfffffff] |
| [ 0.000000] NUMA: Node 0 [mem 0x00000000-0xbfffffff] + [mem 0x100000000-0x13fffffff] -> [mem 0x00000000-0x13fffffff] |
| [ 0.000000] Initmem setup node 0 [mem 0x00000000-0x13fffffff] |
| [ 0.000000] NODE_DATA [mem 0x13fff7000-0x13fffbfff] |
| [ 0.000000] [ffffea0000000000-ffffea00045fffff] PMD -> [ffff88013b600000-ffff88013edfffff] on node 0 |
| [ 0.000000] Zone ranges: |
| [ 0.000000] DMA [mem 0x00001000-0x00ffffff] |
| [ 0.000000] DMA32 [mem 0x01000000-0xffffffff] |
| [ 0.000000] Normal [mem 0x100000000-0x13fffffff] |
| [ 0.000000] Movable zone start for each node |
| [ 0.000000] Early memory node ranges |
| [ 0.000000] node 0: [mem 0x00001000-0x0009efff] |
| [ 0.000000] node 0: [mem 0x00100000-0xbff9ffff] |
| [ 0.000000] node 0: [mem 0x100000000-0x13fffffff] |
| [ 0.000000] On node 0 totalpages: 1048382 |
| [ 0.000000] DMA zone: 56 pages used for memmap |
| [ 0.000000] DMA zone: 21 pages reserved |
| [ 0.000000] DMA zone: 3998 pages, LIFO batch:0 |
| [ 0.000000] DMA32 zone: 10695 pages used for memmap |
| [ 0.000000] DMA32 zone: 782240 pages, LIFO batch:31 |
| [ 0.000000] Normal zone: 3584 pages used for memmap |
| [ 0.000000] Normal zone: 262144 pages, LIFO batch:31 |
| [ 0.000000] Detected use of extended apic ids on hypertransport bus |
| [ 0.000000] Detected use of extended apic ids on hypertransport bus |
| [ 0.000000] ACPI: PM-Timer IO Port: 0x4008 |
| [ 0.000000] ACPI: Local APIC address 0xfee00000 |
| [ 0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x10] enabled) |
| [ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x11] enabled) |
| [ 0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x12] enabled) |
| [ 0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x13] enabled) |
| [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1]) |
| [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1]) |
| [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x02] high edge lint[0x1]) |
| [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x03] high edge lint[0x1]) |
| [ 0.000000] ACPI: IOAPIC (id[0x08] address[0xfec00000] gsi_base[0]) |
| [ 0.000000] IOAPIC[0]: apic_id 8, version 17, address 0xfec00000, GSI 0-23 |
| [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level) |
| [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 14 global_irq 14 high edge) |
| [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 15 global_irq 15 high edge) |
| [ 0.000000] ACPI: IRQ9 used by override. |
| [ 0.000000] ACPI: IRQ14 used by override. |
| [ 0.000000] ACPI: IRQ15 used by override. |
| [ 0.000000] Using ACPI (MADT) for SMP configuration information |
| [ 0.000000] ACPI: HPET id: 0x10de8201 base: 0xfed00000 |
| [ 0.000000] smpboot: Allowing 4 CPUs, 0 hotplug CPUs |
| [ 0.000000] nr_irqs_gsi: 40 |
| [ 0.000000] PM: Registered nosave memory: [mem 0x0009f000-0x0009ffff] |
| [ 0.000000] PM: Registered nosave memory: [mem 0x000a0000-0x000effff] |
| [ 0.000000] PM: Registered nosave memory: [mem 0x000f0000-0x000fffff] |
| [ 0.000000] PM: Registered nosave memory: [mem 0xbffa0000-0xbfffffff] |
| [ 0.000000] PM: Registered nosave memory: [mem 0xc0000000-0xffffffff] |
| [ 0.000000] e820: [mem 0xc0000000-0xffffffff] available for PCI devices |
| [ 0.000000] Booting paravirtualized kernel on bare hardware |
| [ 0.000000] setup_percpu: NR_CPUS:512 nr_cpumask_bits:512 nr_cpu_ids:4 nr_node_ids:2 |
| [ 0.000000] PERCPU: Embedded 27 pages/cpu @ffff88013fc00000 s80896 r8192 d21504 u524288 |
| [ 0.000000] pcpu-alloc: s80896 r8192 d21504 u524288 alloc=1*2097152 |
| [ 0.000000] pcpu-alloc: [0] 0 1 2 3 |
| [ 0.000000] Built 1 zonelists in Node order, mobility grouping on. Total pages: 1034026 |
| [ 0.000000] Policy zone: Normal |
| [ 0.000000] Kernel command line: root=/dev/nfs initrd=initrd-cb-test-tgt rootfstype=nfs nfsroot=10.100.1.100:/nfsroots/cb-test-tgt-03,v3,hard,nointr,tcp ip=10.100.1.12::10.100.1.1:255.255.255.0:embed-o-matic:eth0:off console=ttyS0,115200n8 consoleblank=0 rw BOOT_IMAGE=vmlinuz-cb-test-tgt |
| [ 0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes) |
| [ 0.000000] AGP: Checking aperture... |
| [ 0.000000] AGP: No AGP bridge found |
| [ 0.000000] AGP: Node 0: aperture [bus addr 0xebc0000000-0xebc1ffffff] (32MB) |
| [ 0.000000] Aperture beyond 4GB. Ignoring. |
| [ 0.000000] AGP: Your BIOS doesn't leave a aperture memory hole |
| [ 0.000000] AGP: Please enable the IOMMU option in the BIOS setup |
| [ 0.000000] AGP: This costs you 64MB of RAM |
| [ 0.000000] AGP: Mapping aperture over RAM [mem 0xb4000000-0xb7ffffff] (65536KB) |
| [ 0.000000] PM: Registered nosave memory: [mem 0xb4000000-0xb7ffffff] |
| [ 0.000000] Memory: 3983824K/4193528K available (5203K kernel code, 943K rwdata, 1832K rodata, 1204K init, 840K bss, 209704K reserved) |
| [ 0.000000] Hierarchical RCU implementation. |
| [ 0.000000] RCU dyntick-idle grace-period acceleration is enabled. |
| [ 0.000000] RCU restricting CPUs from NR_CPUS=512 to nr_cpu_ids=4. |
| [ 0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=4 |
| [ 0.000000] NR_IRQS:33024 nr_irqs:712 16 |
| [ 0.000000] spurious 8259A interrupt: IRQ7. |
| [ 0.000000] Console: colour VGA+ 80x25 |
| [ 0.000000] console [ttyS0] enabled |
| [ 0.000000] mempolicy: Disabling automatic NUMA balancing. Configure with numa_balancing= or the kernel.numa_balancing sysctl |
| [ 0.000000] hpet clockevent registered |
| [ 0.000000] tsc: Fast TSC calibration using PIT |
| [ 0.000000] tsc: Detected 3015.454 MHz processor |
| [ 0.000000] tsc: Marking TSC unstable due to TSCs unsynchronized |
| [ 0.016000] Calibrating delay loop (skipped), value calculated using timer frequency.. 6030.90 BogoMIPS (lpj=12061816) |
| [ 0.020001] pid_max: default: 32768 minimum: 301 |
| [ 0.024011] ACPI: Core revision 20140424 |
| [ 0.029304] ACPI: All ACPI Tables successfully acquired |
| [ 0.032231] Security Framework initialized |
| [ 0.036013] AppArmor: AppArmor disabled by boot time parameter |
| [ 0.040001] Yama: disabled by default; enable with sysctl kernel.yama.* |
| [ 0.048106] Dentry cache hash table entries: 524288 (order: 10, 4194304 bytes) |
| [ 0.057846] Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes) |
| [ 0.061246] Mount-cache hash table entries: 8192 (order: 4, 65536 bytes) |
| [ 0.064011] Mountpoint-cache hash table entries: 8192 (order: 4, 65536 bytes) |
| [ 0.072333] Initializing cgroup subsys memory |
| [ 0.076010] Initializing cgroup subsys devices |
| [ 0.080009] Initializing cgroup subsys freezer |
| [ 0.084003] Initializing cgroup subsys net_cls |
| [ 0.088007] Initializing cgroup subsys blkio |
| [ 0.092005] Initializing cgroup subsys perf_event |
| [ 0.096002] Initializing cgroup subsys net_prio |
| [ 0.100028] tseg: 0000000000 |
| [ 0.100035] CPU: Physical Processor ID: 0 |
| [ 0.104001] CPU: Processor Core ID: 0 |
| [ 0.108002] mce: CPU supports 5 MCE banks |
| [ 0.112008] LVT offset 0 assigned for vector 0xf9 |
| [ 0.116003] process: using AMD E400 aware idle routine |
| [ 0.120003] Last level iTLB entries: 4KB 512, 2MB 8, 4MB 4 |
| Last level dTLB entries: 4KB 512, 2MB 8, 4MB 4, 1GB 0 |
| tlb_flushall_shift: 6 |
| [ 0.128051] Freeing SMP alternatives memory: 20K (ffffffff81a1a000 - ffffffff81a1f000) |
| [ 0.136664] ftrace: allocating 21601 entries in 85 pages |
| [ 0.148433] ..TIMER: vector=0x30 apic1=0 pin1=0 apic2=0 pin2=0 |
| [ 0.194519] smpboot: CPU0: Dual-Core AMD Opteron(tm) Processor 8222 (fam: 0f, model: 41, stepping: 03) |
| [ 0.204000] Performance Events: AMD PMU driver. |
| [ 0.204003] ... version: 0 |
| [ 0.208000] ... bit width: 48 |
| [ 0.212000] ... generic registers: 4 |
| [ 0.216000] ... value mask: 0000ffffffffffff |
| [ 0.220000] ... max period: 00007fffffffffff |
| [ 0.224000] ... fixed-purpose events: 0 |
| [ 0.228000] ... event mask: 000000000000000f |
| [ 0.233562] NMI watchdog: enabled on all CPUs, permanently consumes one hw-PMU counter. |
| [ 0.236155] x86: Booting SMP configuration: |
| [ 0.240002] .... node #0, CPUs: #1 #2 #3 |
| [ 0.512105] x86: Booted up 1 node, 4 CPUs |
| [ 0.516001] smpboot: Total of 4 processors activated (24123.43 BogoMIPS) |
| [ 0.524103] devtmpfs: initialized |
| [ 0.533274] pinctrl core: initialized pinctrl subsystem |
| [ 0.536094] NET: Registered protocol family 16 |
| [ 0.540134] cpuidle: using governor ladder |
| [ 0.544002] cpuidle: using governor menu |
| [ 0.548005] node 0 link 1: io port [1000, 5fff] |
| [ 0.548008] TOM: 00000000c0000000 aka 3072M |
| [ 0.552002] node 0 link 1: mmio [a0000, bffff] |
| [ 0.552004] node 0 link 1: mmio [fc000000, fc5fffff] |
| [ 0.552006] node 0 link 1: mmio [f8000000, fbffffff] |
| [ 0.552007] TOM2: 0000000140000000 aka 5120M |
| [ 0.556002] bus: [bus 00-08] on node 0 link 1 |
| [ 0.556003] bus: 00 [io 0x0000-0xffff] |
| [ 0.556005] bus: 00 [mem 0x000a0000-0x000bffff] |
| [ 0.556006] bus: 00 [mem 0xc0000000-0xffffffff] |
| [ 0.556007] bus: 00 [mem 0x140000000-0xfcffffffff] |
| [ 0.556054] ACPI: bus type PCI registered |
| [ 0.560002] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5 |
| [ 0.564092] PCI: Using configuration type 1 for base access |
| [ 0.584085] ACPI: Added _OSI(Module Device) |
| [ 0.588002] ACPI: Added _OSI(Processor Device) |
| [ 0.592001] ACPI: Added _OSI(3.0 _SCP Extensions) |
| [ 0.596001] ACPI: Added _OSI(Processor Aggregator Device) |
| [ 0.605004] ACPI: Interpreter enabled |
| [ 0.608009] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S2_] (20140424/hwxface-580) |
| [ 0.616001] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S3_] (20140424/hwxface-580) |
| [ 0.626186] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S4_] (20140424/hwxface-580) |
| [ 0.636004] ACPI: (supports S0 S1 S5) |
| [ 0.640001] ACPI: Using IOAPIC for interrupt routing |
| [ 0.644027] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug |
| [ 0.653363] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-08]) |
| [ 0.656006] acpi PNP0A03:00: _OSC: OS supports [ASPM ClockPM Segments MSI] |
| [ 0.660011] acpi PNP0A03:00: _OSC: not requesting OS control; OS requires [ExtendedConfig ASPM ClockPM MSI] |
| [ 0.665573] acpi PNP0A03:00: host bridge window expanded to [io 0x0000-0x0cf7]; [io 0x03b0-0x03df] ignored |
| [ 0.668005] acpi PNP0A03:00: fail to add MMCONFIG information, can't access extended PCI configuration space under this bridge. |
| [ 0.672117] PCI host bridge to bus 0000:00 |
| [ 0.676003] pci_bus 0000:00: root bus resource [bus 00-08] |
| [ 0.680001] pci_bus 0000:00: root bus resource [io 0x0d00-0x5fff] |
| [ 0.684001] pci_bus 0000:00: root bus resource [mem 0xf8000000-0xfbffffff] |
| [ 0.688001] pci_bus 0000:00: root bus resource [mem 0xfc000000-0xfc5fffff] |
| [ 0.692001] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff] |
| [ 0.696001] pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7] |
| [ 0.700010] pci 0000:00:00.0: [10de:005e] type 00 class 0x058000 |
| [ 0.700124] pci 0000:00:01.0: [10de:0051] type 00 class 0x060100 |
| [ 0.700130] pci 0000:00:01.0: reg 0x10: [io 0x4c00-0x4c7f] |
| [ 0.700204] pci 0000:00:01.1: [10de:0052] type 00 class 0x0c0500 |
| [ 0.700210] pci 0000:00:01.1: reg 0x10: [io 0x5000-0x501f] |
| [ 0.700219] pci 0000:00:01.1: reg 0x20: [io 0x4c80-0x4cbf] |
| [ 0.700222] pci 0000:00:01.1: reg 0x24: [io 0x4cc0-0x4cff] |
| [ 0.700233] pci 0000:00:01.1: PME# supported from D3hot D3cold |
| [ 0.700299] pci 0000:00:02.0: [10de:005a] type 00 class 0x0c0310 |
| [ 0.700305] pci 0000:00:02.0: reg 0x10: [mem 0xfc500000-0xfc500fff] |
| [ 0.700325] pci 0000:00:02.0: supports D1 D2 |
| [ 0.700327] pci 0000:00:02.0: PME# supported from D0 D1 D2 D3hot D3cold |
| [ 0.700359] pci 0000:00:02.0: System wakeup disabled by ACPI |
| [ 0.704041] pci 0000:00:02.1: [10de:005b] type 00 class 0x0c0320 |
| [ 0.704048] pci 0000:00:02.1: reg 0x10: [mem 0xfc503000-0xfc5030ff] |
| [ 0.704073] pci 0000:00:02.1: supports D1 D2 |
| [ 0.704074] pci 0000:00:02.1: PME# supported from D0 D1 D2 D3hot D3cold |
| [ 0.704106] pci 0000:00:02.1: System wakeup disabled by ACPI |
| [ 0.708045] pci 0000:00:06.0: [10de:0053] type 00 class 0x01018a |
| [ 0.708057] pci 0000:00:06.0: reg 0x20: [io 0x5020-0x502f] |
| [ 0.708064] pci 0000:00:06.0: legacy IDE quirk: reg 0x10: [io 0x01f0-0x01f7] |
| [ 0.712004] pci 0000:00:06.0: legacy IDE quirk: reg 0x14: [io 0x03f6] |
| [ 0.716001] pci 0000:00:06.0: legacy IDE quirk: reg 0x18: [io 0x0170-0x0177] |
| [ 0.720001] pci 0000:00:06.0: legacy IDE quirk: reg 0x1c: [io 0x0376] |
| [ 0.724063] pci 0000:00:07.0: [10de:0054] type 00 class 0x010185 |
| [ 0.724069] pci 0000:00:07.0: reg 0x10: [io 0x5050-0x5057] |
| [ 0.724073] pci 0000:00:07.0: reg 0x14: [io 0x5070-0x5073] |
| [ 0.724076] pci 0000:00:07.0: reg 0x18: [io 0x5058-0x505f] |
| [ 0.724079] pci 0000:00:07.0: reg 0x1c: [io 0x5074-0x5077] |
| [ 0.724083] pci 0000:00:07.0: reg 0x20: [io 0x5030-0x503f] |
| [ 0.724086] pci 0000:00:07.0: reg 0x24: [mem 0xfc501000-0xfc501fff] |
| [ 0.724151] pci 0000:00:08.0: [10de:0055] type 00 class 0x010185 |
| [ 0.724156] pci 0000:00:08.0: reg 0x10: [io 0x5060-0x5067] |
| [ 0.724160] pci 0000:00:08.0: reg 0x14: [io 0x5078-0x507b] |
| [ 0.724163] pci 0000:00:08.0: reg 0x18: [io 0x5068-0x506f] |
| [ 0.724166] pci 0000:00:08.0: reg 0x1c: [io 0x507c-0x507f] |
| [ 0.724170] pci 0000:00:08.0: reg 0x20: [io 0x5040-0x504f] |
| [ 0.724173] pci 0000:00:08.0: reg 0x24: [mem 0xfc502000-0xfc502fff] |
| [ 0.724238] pci 0000:00:09.0: [10de:005c] type 01 class 0x060400 |
| [ 0.724280] pci 0000:00:09.0: System wakeup disabled by ACPI |
| [ 0.728041] pci 0000:00:0b.0: [10de:005d] type 01 class 0x060400 |
| [ 0.728061] pci 0000:00:0b.0: PME# supported from D0 D1 D2 D3hot D3cold |
| [ 0.728093] pci 0000:00:0b.0: System wakeup disabled by ACPI |
| [ 0.732042] pci 0000:00:0c.0: [10de:005d] type 01 class 0x060400 |
| [ 0.732061] pci 0000:00:0c.0: PME# supported from D0 D1 D2 D3hot D3cold |
| [ 0.732093] pci 0000:00:0c.0: System wakeup disabled by ACPI |
| [ 0.736041] pci 0000:00:0d.0: [10de:005d] type 01 class 0x060400 |
| [ 0.736060] pci 0000:00:0d.0: PME# supported from D0 D1 D2 D3hot D3cold |
| [ 0.736091] pci 0000:00:0d.0: System wakeup disabled by ACPI |
| [ 0.740041] pci 0000:00:0e.0: [10de:005d] type 01 class 0x060400 |
| [ 0.740060] pci 0000:00:0e.0: PME# supported from D0 D1 D2 D3hot D3cold |
| [ 0.740092] pci 0000:00:0e.0: System wakeup disabled by ACPI |
| [ 0.744046] pci 0000:00:18.0: [1022:1100] type 00 class 0x060000 |
| [ 0.744113] pci 0000:00:18.1: [1022:1101] type 00 class 0x060000 |
| [ 0.744175] pci 0000:00:18.2: [1022:1102] type 00 class 0x060000 |
| [ 0.744236] pci 0000:00:18.3: [1022:1103] type 00 class 0x060000 |
| [ 0.744300] pci 0000:00:19.0: [1022:1100] type 00 class 0x060000 |
| [ 0.744367] pci 0000:00:19.1: [1022:1101] type 00 class 0x060000 |
| [ 0.744427] pci 0000:00:19.2: [1022:1102] type 00 class 0x060000 |
| [ 0.744489] pci 0000:00:19.3: [1022:1103] type 00 class 0x060000 |
| [ 0.744588] pci 0000:01:04.0: [18ca:0020] type 00 class 0x030000 |
| [ 0.744597] pci 0000:01:04.0: reg 0x10: [mem 0xf8000000-0xfbffffff pref] |
| [ 0.744602] pci 0000:01:04.0: reg 0x14: [mem 0xfc200000-0xfc23ffff] |
| [ 0.744608] pci 0000:01:04.0: reg 0x18: [io 0x3000-0x307f] |
| [ 0.744638] pci 0000:01:04.0: supports D1 D2 |
| [ 0.744690] pci 0000:00:09.0: PCI bridge to [bus 01] |
| [ 0.748002] pci 0000:00:09.0: bridge window [io 0x3000-0x3fff] |
| [ 0.748005] pci 0000:00:09.0: bridge window [mem 0xfc200000-0xfc2fffff] |
| [ 0.748007] pci 0000:00:09.0: bridge window [mem 0xf8000000-0xfbffffff pref] |
| [ 0.748057] pci 0000:02:00.0: [14e4:1659] type 00 class 0x020000 |
| [ 0.748069] pci 0000:02:00.0: reg 0x10: [mem 0xfc300000-0xfc30ffff 64bit] |
| [ 0.748092] pci 0000:02:00.0: reg 0x30: [mem 0x0d080000-0x0d08ffff pref] |
| [ 0.748132] pci 0000:02:00.0: PME# supported from D3hot D3cold |
| [ 0.748184] pci 0000:02:00.0: disabling ASPM on pre-1.1 PCIe device. You can enable it with 'pcie_aspm=force' |
| [ 0.752007] pci 0000:00:0b.0: PCI bridge to [bus 02] |
| [ 0.756003] pci 0000:00:0b.0: bridge window [mem 0xfc300000-0xfc3fffff] |
| [ 0.756053] pci 0000:03:00.0: [14e4:1659] type 00 class 0x020000 |
| [ 0.756065] pci 0000:03:00.0: reg 0x10: [mem 0xfc400000-0xfc40ffff 64bit] |
| [ 0.756127] pci 0000:03:00.0: PME# supported from D3hot D3cold |
| [ 0.756177] pci 0000:03:00.0: disabling ASPM on pre-1.1 PCIe device. You can enable it with 'pcie_aspm=force' |
| [ 0.760005] pci 0000:00:0c.0: PCI bridge to [bus 03] |
| [ 0.764003] pci 0000:00:0c.0: bridge window [mem 0xfc400000-0xfc4fffff] |
| [ 0.764041] pci 0000:00:0d.0: PCI bridge to [bus 04] |
| [ 0.768046] pci 0000:05:00.0: [111d:8018] type 01 class 0x060400 |
| [ 0.768087] pci 0000:05:00.0: PME# supported from D0 D3hot D3cold |
| [ 0.768133] pci 0000:05:00.0: disabling ASPM on pre-1.1 PCIe device. You can enable it with 'pcie_aspm=force' |
| [ 0.772005] pci 0000:00:0e.0: PCI bridge to [bus 05-08] |
| [ 0.776002] pci 0000:00:0e.0: bridge window [io 0x1000-0x2fff] |
| [ 0.776004] pci 0000:00:0e.0: bridge window [mem 0xfc000000-0xfc1fffff] |
| [ 0.776049] pci 0000:06:00.0: [111d:8018] type 01 class 0x060400 |
| [ 0.776098] pci 0000:06:00.0: PME# supported from D0 D3hot D3cold |
| [ 0.776145] pci 0000:06:00.0: disabling ASPM on pre-1.1 PCIe device. You can enable it with 'pcie_aspm=force' |
| [ 0.780008] pci 0000:06:01.0: [111d:8018] type 01 class 0x060400 |
| [ 0.780056] pci 0000:06:01.0: PME# supported from D0 D3hot D3cold |
| [ 0.780103] pci 0000:06:00.0: disabling ASPM on pre-1.1 PCIe device. You can enable it with 'pcie_aspm=force' |
| [ 0.784020] pci 0000:05:00.0: PCI bridge to [bus 06-08] |
| [ 0.788005] pci 0000:05:00.0: bridge window [io 0x1000-0x2fff] |
| [ 0.788009] pci 0000:05:00.0: bridge window [mem 0xfc000000-0xfc1fffff] |
| [ 0.788069] pci 0000:07:00.0: [8086:10bc] type 00 class 0x020000 |
| [ 0.788081] pci 0000:07:00.0: reg 0x10: [mem 0xfc000000-0xfc01ffff] |
| [ 0.788091] pci 0000:07:00.0: reg 0x14: [mem 0xfc020000-0xfc03ffff] |
| [ 0.788100] pci 0000:07:00.0: reg 0x18: [io 0x1000-0x101f] |
| [ 0.788132] pci 0000:07:00.0: reg 0x30: [mem 0xfc040000-0xfc05ffff pref] |
| [ 0.788173] pci 0000:07:00.0: PME# supported from D0 D3hot D3cold |
| [ 0.788234] pci 0000:07:00.1: [8086:10bc] type 00 class 0x020000 |
| [ 0.788246] pci 0000:07:00.1: reg 0x10: [mem 0xfc060000-0xfc07ffff] |
| [ 0.788256] pci 0000:07:00.1: reg 0x14: [mem 0xfc080000-0xfc09ffff] |
| [ 0.788265] pci 0000:07:00.1: reg 0x18: [io 0x1020-0x103f] |
| [ 0.788296] pci 0000:07:00.1: reg 0x30: [mem 0xfc0a0000-0xfc0bffff pref] |
| [ 0.788338] pci 0000:07:00.1: PME# supported from D0 D3hot D3cold |
| [ 0.788392] pci 0000:07:00.0: disabling ASPM on pre-1.1 PCIe device. You can enable it with 'pcie_aspm=force' |
| [ 0.792009] pci 0000:06:00.0: PCI bridge to [bus 07] |
| [ 0.796005] pci 0000:06:00.0: bridge window [io 0x1000-0x1fff] |
| [ 0.796009] pci 0000:06:00.0: bridge window [mem 0xfc000000-0xfc0fffff] |
| [ 0.796071] pci 0000:08:00.0: [8086:10bc] type 00 class 0x020000 |
| [ 0.796083] pci 0000:08:00.0: reg 0x10: [mem 0xfc100000-0xfc11ffff] |
| [ 0.796093] pci 0000:08:00.0: reg 0x14: [mem 0xfc120000-0xfc13ffff] |
| [ 0.796102] pci 0000:08:00.0: reg 0x18: [io 0x2000-0x201f] |
| [ 0.796134] pci 0000:08:00.0: reg 0x30: [mem 0xfc140000-0xfc15ffff pref] |
| [ 0.796176] pci 0000:08:00.0: PME# supported from D0 D3hot |
| [ 0.796237] pci 0000:08:00.1: [8086:10bc] type 00 class 0x020000 |
| [ 0.796249] pci 0000:08:00.1: reg 0x10: [mem 0xfc160000-0xfc17ffff] |
| [ 0.796258] pci 0000:08:00.1: reg 0x14: [mem 0xfc180000-0xfc19ffff] |
| [ 0.796267] pci 0000:08:00.1: reg 0x18: [io 0x2020-0x203f] |
| [ 0.796299] pci 0000:08:00.1: reg 0x30: [mem 0xfc1a0000-0xfc1bffff pref] |
| [ 0.796341] pci 0000:08:00.1: PME# supported from D0 D3hot |
| [ 0.796396] pci 0000:08:00.0: disabling ASPM on pre-1.1 PCIe device. You can enable it with 'pcie_aspm=force' |
| [ 0.800009] pci 0000:06:01.0: PCI bridge to [bus 08] |
| [ 0.804005] pci 0000:06:01.0: bridge window [io 0x2000-0x2fff] |
| [ 0.804009] pci 0000:06:01.0: bridge window [mem 0xfc100000-0xfc1fffff] |
| [ 0.804044] pci_bus 0000:00: on NUMA node 0 |
| [ 0.804102] ACPI: PCI Interrupt Link [LNKA] (IRQs *16 17 18 19) |
| [ 0.812051] ACPI: PCI Interrupt Link [LNKB] (IRQs 16 *17 18 19) |
| [ 0.817547] ACPI: PCI Interrupt Link [LNKC] (IRQs 16 17 18 19) *0, disabled. |
| [ 0.825496] ACPI: PCI Interrupt Link [LNKD] (IRQs 16 17 18 19) *0, disabled. |
| [ 0.832245] ACPI: PCI Interrupt Link [LNKE] (IRQs 16 17 18 19) *0, disabled. |
| [ 0.838710] ACPI: PCI Interrupt Link [LLAS] (IRQs 20 21 22 23) *0, disabled. |
| [ 0.842710] ACPI: PCI Interrupt Link [LUOH] (IRQs 20 21 22 *23) |
| [ 0.849268] ACPI: PCI Interrupt Link [LUEH] (IRQs 20 21 *22 23) |
| [ 0.853547] ACPI: PCI Interrupt Link [LAUD] (IRQs 20 21 22 23) *0, disabled. |
| [ 0.862432] ACPI: PCI Interrupt Link [LMOD] (IRQs 20 21 22 23) *0, disabled. |
| [ 0.869600] ACPI: PCI Interrupt Link [LPA0] (IRQs 20 21 22 23) *0, disabled. |
| [ 0.876243] ACPI: PCI Interrupt Link [LSA0] (IRQs 20 *21 22 23) |
| [ 0.881541] ACPI: PCI Interrupt Link [LSA1] (IRQs *20 21 22 23) |
| [ 0.888909] ACPI: PCI Interrupt Link [LEMA] (IRQs 20 21 22 23) *0, disabled. |
| [ 0.896245] ACPI: PCI Interrupt Link [LUB0] (IRQs 20 21 22 23) *0, disabled. |
| [ 0.902707] ACPI: PCI Interrupt Link [LUB2] (IRQs 20 21 22 23) *0, disabled. |
| [ 0.906708] ACPI: PCI Interrupt Link [LKSM] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled. |
| [ 0.915177] ACPI: PCI Interrupt Link [LNIA] (IRQs 16) *0, disabled. |
| [ 0.921598] ACPI: PCI Interrupt Link [LNIB] (IRQs 17) *0, disabled. |
| [ 0.928056] ACPI: PCI Interrupt Link [LNIC] (IRQs 18) *0, disabled. |
| [ 0.933874] ACPI: PCI Interrupt Link [LNND] (IRQs 19) *0, disabled. |
| [ 0.940401] ACPI: Enabled 1 GPEs in block 00 to 1F |
| [ 0.944091] vgaarb: setting as boot device: PCI:0000:01:04.0 |
| [ 0.948000] vgaarb: device added: PCI:0000:01:04.0,decodes=io+mem,owns=io+mem,locks=none |
| [ 0.956008] vgaarb: loaded |
| [ 0.960001] vgaarb: bridge control possible 0000:01:04.0 |
| [ 0.964118] PCI: Using ACPI for IRQ routing |
| [ 0.972004] PCI: pci_cache_line_size set to 64 bytes |
| [ 0.972064] e820: reserve RAM buffer [mem 0x0009fc00-0x0009ffff] |
| [ 0.972067] e820: reserve RAM buffer [mem 0xbffa0000-0xbfffffff] |
| [ 0.972257] HPET: 3 timers in total, 0 timers will be used for per-cpu timer |
| [ 0.976005] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 31 |
| [ 0.984189] hpet0: 3 comparators, 32-bit 25.000000 MHz counter |
| [ 0.992042] Switched to clocksource hpet |
| [ 1.004764] pnp: PnP ACPI init |
| [ 1.007848] ACPI: bus type PNP registered |
| [ 1.012253] pnp 00:00: Plug and Play ACPI device, IDs PNP0303 PNP030b (active) |
| [ 1.012304] pnp 00:01: Plug and Play ACPI device, IDs PNP0f03 PNP0f13 (active) |
| [ 1.012358] pnp 00:02: Plug and Play ACPI device, IDs PNP0501 (active) |
| [ 1.012411] pnp 00:03: Plug and Play ACPI device, IDs PNP0501 (active) |
| [ 1.012439] pnp 00:04: [dma 2] |
| [ 1.012464] pnp 00:04: Plug and Play ACPI device, IDs PNP0700 (active) |
| [ 1.012479] pnp: PnP ACPI: found 5 devices |
| [ 1.016579] ACPI: bus type PNP unregistered |
| [ 1.027987] pci 0000:02:00.0: can't claim BAR 6 [mem 0x0d080000-0x0d08ffff pref]: no compatible bridge window |
| [ 1.037948] pci 0000:00:09.0: PCI bridge to [bus 01] |
| [ 1.042907] pci 0000:00:09.0: bridge window [io 0x3000-0x3fff] |
| [ 1.049000] pci 0000:00:09.0: bridge window [mem 0xfc200000-0xfc2fffff] |
| [ 1.055785] pci 0000:00:09.0: bridge window [mem 0xf8000000-0xfbffffff pref] |
| [ 1.063010] pci 0000:02:00.0: BAR 6: assigned [mem 0xfc310000-0xfc31ffff pref] |
| [ 1.070226] pci 0000:00:0b.0: PCI bridge to [bus 02] |
| [ 1.075189] pci 0000:00:0b.0: bridge window [mem 0xfc300000-0xfc3fffff] |
| [ 1.081977] pci 0000:00:0c.0: PCI bridge to [bus 03] |
| [ 1.086941] pci 0000:00:0c.0: bridge window [mem 0xfc400000-0xfc4fffff] |
| [ 1.093729] pci 0000:00:0d.0: PCI bridge to [bus 04] |
| [ 1.098696] pci 0000:06:00.0: PCI bridge to [bus 07] |
| [ 1.103660] pci 0000:06:00.0: bridge window [io 0x1000-0x1fff] |
| [ 1.109756] pci 0000:06:00.0: bridge window [mem 0xfc000000-0xfc0fffff] |
| [ 1.116544] pci 0000:06:01.0: PCI bridge to [bus 08] |
| [ 1.121504] pci 0000:06:01.0: bridge window [io 0x2000-0x2fff] |
| [ 1.127600] pci 0000:06:01.0: bridge window [mem 0xfc100000-0xfc1fffff] |
| [ 1.134388] pci 0000:05:00.0: PCI bridge to [bus 06-08] |
| [ 1.139608] pci 0000:05:00.0: bridge window [io 0x1000-0x2fff] |
| [ 1.145697] pci 0000:05:00.0: bridge window [mem 0xfc000000-0xfc1fffff] |
| [ 1.152485] pci 0000:00:0e.0: PCI bridge to [bus 05-08] |
| [ 1.157704] pci 0000:00:0e.0: bridge window [io 0x1000-0x2fff] |
| [ 1.163790] pci 0000:00:0e.0: bridge window [mem 0xfc000000-0xfc1fffff] |
| [ 1.170577] pci_bus 0000:00: resource 4 [io 0x0d00-0x5fff] |
| [ 1.170579] pci_bus 0000:00: resource 5 [mem 0xf8000000-0xfbffffff] |
| [ 1.170581] pci_bus 0000:00: resource 6 [mem 0xfc000000-0xfc5fffff] |
| [ 1.170583] pci_bus 0000:00: resource 7 [mem 0x000a0000-0x000bffff] |
| [ 1.170585] pci_bus 0000:00: resource 8 [io 0x0000-0x0cf7] |
| [ 1.170588] pci_bus 0000:01: resource 0 [io 0x3000-0x3fff] |
| [ 1.170590] pci_bus 0000:01: resource 1 [mem 0xfc200000-0xfc2fffff] |
| [ 1.170591] pci_bus 0000:01: resource 2 [mem 0xf8000000-0xfbffffff pref] |
| [ 1.170594] pci_bus 0000:02: resource 1 [mem 0xfc300000-0xfc3fffff] |
| [ 1.170596] pci_bus 0000:03: resource 1 [mem 0xfc400000-0xfc4fffff] |
| [ 1.170599] pci_bus 0000:05: resource 0 [io 0x1000-0x2fff] |
| [ 1.170600] pci_bus 0000:05: resource 1 [mem 0xfc000000-0xfc1fffff] |
| [ 1.170603] pci_bus 0000:06: resource 0 [io 0x1000-0x2fff] |
| [ 1.170605] pci_bus 0000:06: resource 1 [mem 0xfc000000-0xfc1fffff] |
| [ 1.170607] pci_bus 0000:07: resource 0 [io 0x1000-0x1fff] |
| [ 1.170609] pci_bus 0000:07: resource 1 [mem 0xfc000000-0xfc0fffff] |
| [ 1.170611] pci_bus 0000:08: resource 0 [io 0x2000-0x2fff] |
| [ 1.170613] pci_bus 0000:08: resource 1 [mem 0xfc100000-0xfc1fffff] |
| [ 1.170686] NET: Registered protocol family 2 |
| [ 1.175360] TCP established hash table entries: 32768 (order: 6, 262144 bytes) |
| [ 1.182783] TCP bind hash table entries: 32768 (order: 7, 524288 bytes) |
| [ 1.189701] TCP: Hash tables configured (established 32768 bind 32768) |
| [ 1.196309] TCP: reno registered |
| [ 1.199543] UDP hash table entries: 2048 (order: 4, 65536 bytes) |
| [ 1.205597] UDP-Lite hash table entries: 2048 (order: 4, 65536 bytes) |
| [ 1.212206] NET: Registered protocol family 1 |
| [ 1.216848] ACPI: PCI Interrupt Link [LUB0] enabled at IRQ 23 |
| [ 1.222823] ACPI: PCI Interrupt Link [LUB2] enabled at IRQ 22 |
| [ 1.228665] pci 0000:00:00.0: Found enabled HT MSI Mapping |
| [ 1.234171] pci 0000:00:00.0: Found enabled HT MSI Mapping |
| [ 1.239660] pci 0000:00:0b.0: Found disabled HT MSI Mapping |
| [ 1.245235] pci 0000:00:00.0: Found enabled HT MSI Mapping |
| [ 1.250743] pci 0000:00:00.0: Found enabled HT MSI Mapping |
| [ 1.256229] pci 0000:00:0c.0: Found disabled HT MSI Mapping |
| [ 1.261804] pci 0000:00:00.0: Found enabled HT MSI Mapping |
| [ 1.267315] pci 0000:00:00.0: Found enabled HT MSI Mapping |
| [ 1.272802] pci 0000:00:0d.0: Found disabled HT MSI Mapping |
| [ 1.278375] pci 0000:00:00.0: Found enabled HT MSI Mapping |
| [ 1.283890] pci 0000:00:00.0: Found enabled HT MSI Mapping |
| [ 1.289371] pci 0000:00:0e.0: Found disabled HT MSI Mapping |
| [ 1.294945] pci 0000:00:00.0: Found enabled HT MSI Mapping |
| [ 1.300445] pci 0000:01:04.0: Video device with shadowed ROM |
| [ 1.300470] PCI: CLS 64 bytes, default 64 |
| [ 1.300550] Unpacking initramfs... |
| [ 1.467836] Freeing initrd memory: 8744K (ffff88007f775000 - ffff88007ffff000) |
| [ 1.475477] PCI-DMA: Disabling AGP. |
| [ 1.479110] PCI-DMA: aperture base @ b4000000 size 65536 KB |
| [ 1.484684] PCI-DMA: using GART IOMMU. |
| [ 1.488437] PCI-DMA: Reserving 64MB of IOMMU area in the AGP aperture |
| [ 1.498616] platform rtc_cmos: registered platform RTC device (no PNP device found) |
| [ 1.506427] microcode: AMD CPU family 0xf not supported |
| [ 1.512069] futex hash table entries: 1024 (order: 4, 65536 bytes) |
| [ 1.518308] audit: initializing netlink subsys (disabled) |
| [ 1.523746] audit: type=2000 audit(1452831003.520:1): initialized |
| [ 1.530268] HugeTLB registered 2 MB page size, pre-allocated 0 pages |
| [ 1.536648] zbud: loaded |
| [ 1.539382] VFS: Disk quotas dquot_6.5.2 |
| [ 1.543326] Dquot-cache hash table entries: 512 (order 0, 4096 bytes) |
| [ 1.549834] msgmni has been set to 7926 |
| [ 1.554102] alg: No test for stdrng (krng) |
| [ 1.558248] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252) |
| [ 1.565711] io scheduler noop registered |
| [ 1.569633] io scheduler deadline registered |
| [ 1.573951] io scheduler cfq registered (default) |
| [ 1.578954] pci_hotplug: PCI Hot Plug PCI Core version: 0.5 |
| [ 1.584542] pciehp: PCI Express Hot Plug Controller Driver version: 0.4 |
| [ 1.591237] GHES: HEST is not enabled! |
| [ 1.595072] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled |
| [ 1.621606] 00:02: ttyS0 at I/O 0x3f8 (irq = 4, base_baud = 115200) is a 16550A |
| [ 1.649217] 00:03: ttyS1 at I/O 0x2f8 (irq = 3, base_baud = 115200) is a 16550A |
| [ 1.656942] Linux agpgart interface v0.103 |
| [ 1.661156] i8042: PNP: PS/2 Controller [PNP0303:KBD,PNP0f03:MOU] at 0x60,0x64 irq 1,12 |
| [ 1.671471] serio: i8042 KBD port at 0x60,0x64 irq 1 |
| [ 1.676439] serio: i8042 AUX port at 0x60,0x64 irq 12 |
| [ 1.681719] mousedev: PS/2 mouse device common for all mice |
| [ 1.687377] rtc_cmos rtc_cmos: RTC can wake from S4 |
| [ 1.692411] rtc_cmos rtc_cmos: rtc core: registered rtc_cmos as rtc0 |
| [ 1.698783] rtc_cmos rtc_cmos: alarms up to one year, y3k, 114 bytes nvram, hpet irqs |
| [ 1.706626] ledtrig-cpu: registered to indicate activity on CPUs |
| [ 1.712725] AMD IOMMUv2 driver by Joerg Roedel <joerg.roedel@amd.com> |
| [ 1.719161] AMD IOMMUv2 functionality not available on this system |
| [ 1.725443] TCP: cubic registered |
| [ 1.728833] NET: Registered protocol family 10 |
| [ 1.733581] mip6: Mobile IPv6 |
| [ 1.736557] NET: Registered protocol family 17 |
| [ 1.741003] mpls_gso: MPLS GSO support |
| [ 1.745160] registered taskstats version 1 |
| [ 1.749852] rtc_cmos rtc_cmos: setting system clock to 2016-01-15 04:10:04 UTC (1452831004) |
| [ 1.758266] PM: Hibernation image not present or could not be loaded. |
| [ 1.759536] Freeing unused kernel memory: 1204K (ffffffff818ed000 - ffffffff81a1a000) |
| [ 1.767393] Write protecting the kernel read-only data: 8192k |
| [ 1.775547] Freeing unused kernel memory: 928K (ffff880001518000 - ffff880001600000) |
| [ 1.783829] Freeing unused kernel memory: 216K (ffff8800017ca000 - ffff880001800000) |
| [ 1.800228] systemd-udevd[72]: starting version 215 |
| [ 1.805494] random: systemd-udevd urandom read with 3 bits of entropy available |
| [ 1.822465] pps_core: LinuxPPS API ver. 1 registered |
| [ 1.827440] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it> |
| [ 1.837213] PTP clock support registered |
| [ 1.837220] ACPI: bus type USB registered |
| [ 1.837373] usbcore: registered new interface driver usbfs |
| [ 1.837385] usbcore: registered new interface driver hub |
| [ 1.837676] usbcore: registered new device driver usb |
| [ 1.862069] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver |
| [ 1.869612] e1000e: Intel(R) PRO/1000 Network Driver - 2.3.2-k |
| [ 1.875472] e1000e: Copyright(c) 1999 - 2014 Intel Corporation. |
| [ 1.881614] ACPI: PCI Interrupt Link [LNND] enabled at IRQ 19 |
| [ 1.881650] tg3.c:v3.137 (May 11, 2014) |
| [ 1.881664] tg3 0000:02:00.0: enabling device (0004 -> 0006) |
| [ 1.896953] e1000e 0000:07:00.0: Interrupt Throttling Rate (ints/sec) set to dynamic conservative mode |
| [ 1.896963] ACPI: PCI Interrupt Link [LNIB] enabled at IRQ 17 |
| [ 1.896966] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver |
| [ 1.897032] ehci-pci: EHCI PCI platform driver |
| [ 1.897257] ehci-pci 0000:00:02.1: EHCI Host Controller |
| [ 1.897265] ehci-pci 0000:00:02.1: new USB bus registered, assigned bus number 1 |
| [ 1.897278] ehci-pci 0000:00:02.1: debug port 1 |
| [ 1.897317] ehci-pci 0000:00:02.1: cache line size of 64 is not supported |
| [ 1.897342] ehci-pci 0000:00:02.1: irq 22, io mem 0xfc503000 |
| [ 1.908017] ehci-pci 0000:00:02.1: USB 2.0 started, EHCI 1.00 |
| [ 1.908071] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002 |
| [ 1.908073] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 |
| [ 1.908074] usb usb1: Product: EHCI Host Controller |
| [ 1.908075] usb usb1: Manufacturer: Linux 3.16.0-4-amd64 ehci_hcd |
| [ 1.908076] usb usb1: SerialNumber: 0000:00:02.1 |
| [ 1.908241] hub 1-0:1.0: USB hub found |
| [ 1.908249] hub 1-0:1.0: 10 ports detected |
| [ 1.988602] e1000e 0000:07:00.0: irq 40 for MSI/MSI-X |
| [ 1.988761] ohci-pci: OHCI PCI platform driver |
| [ 1.993343] ohci-pci 0000:00:02.0: OHCI PCI host controller |
| [ 1.998915] ohci-pci 0000:00:02.0: new USB bus registered, assigned bus number 2 |
| [ 2.006338] ohci-pci 0000:00:02.0: irq 23, io mem 0xfc500000 |
| [ 2.029921] tg3 0000:02:00.0 eth0: Tigon3 [partno(BCM95721) rev 4201] (PCI Express) MAC address 00:23:54:37:d4:d3 |
| [ 2.040175] tg3 0000:02:00.0 eth0: attached PHY is 5750 (10/100/1000Base-T Ethernet) (WireSpeed[1], EEE[0]) |
| [ 2.049905] tg3 0000:02:00.0 eth0: RXcsums[1] LinkChgREG[0] MIirq[0] ASF[0] TSOcap[1] |
| [ 2.057728] tg3 0000:02:00.0 eth0: dma_rwctrl[76180000] dma_mask[64-bit] |
| [ 2.064472] tg3 0000:03:00.0: enabling device (0004 -> 0006) |
| [ 2.066080] usb usb2: New USB device found, idVendor=1d6b, idProduct=0001 |
| [ 2.066081] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1 |
| [ 2.066082] usb usb2: Product: OHCI PCI host controller |
| [ 2.066083] usb usb2: Manufacturer: Linux 3.16.0-4-amd64 ohci_hcd |
| [ 2.066084] usb usb2: SerialNumber: 0000:00:02.0 |
| [ 2.066297] hub 2-0:1.0: USB hub found |
| [ 2.066308] hub 2-0:1.0: 10 ports detected |
| [ 2.108051] ACPI: PCI Interrupt Link [LNIA] enabled at IRQ 16 |
| [ 2.151102] tg3 0000:03:00.0 eth1: Tigon3 [partno(BCM95721) rev 4201] (PCI Express) MAC address 00:23:54:37:d5:e9 |
| [ 2.152877] e1000e 0000:07:00.0 eth2: (PCI Express:2.5GT/s:Width x4) 00:15:17:4e:46:c9 |
| [ 2.152878] e1000e 0000:07:00.0 eth2: Intel(R) PRO/1000 Network Connection |
| [ 2.152953] e1000e 0000:07:00.0 eth2: MAC: 0, PHY: 4, PBA No: D72468-003 |
| [ 2.153132] ACPI: PCI Interrupt Link [LNIC] enabled at IRQ 18 |
| [ 2.153244] e1000e 0000:07:00.1: Interrupt Throttling Rate (ints/sec) set to dynamic conservative mode |
| [ 2.153268] e1000e 0000:07:00.1: irq 41 for MSI/MSI-X |
| [ 2.197840] tg3 0000:03:00.0 eth1: attached PHY is 5750 (10/100/1000Base-T Ethernet) (WireSpeed[1], EEE[0]) |
| [ 2.207576] tg3 0000:03:00.0 eth1: RXcsums[1] LinkChgREG[0] MIirq[0] ASF[0] TSOcap[1] |
| [ 2.215401] tg3 0000:03:00.0 eth1: dma_rwctrl[76180000] dma_mask[64-bit] |
| [ 2.328750] e1000e 0000:07:00.1 eth3: (PCI Express:2.5GT/s:Width x4) 00:15:17:4e:46:c8 |
| [ 2.336670] e1000e 0000:07:00.1 eth3: Intel(R) PRO/1000 Network Connection |
| [ 2.343617] e1000e 0000:07:00.1 eth3: MAC: 0, PHY: 4, PBA No: D72468-003 |
| [ 2.350430] e1000e 0000:08:00.0: Interrupt Throttling Rate (ints/sec) set to dynamic conservative mode |
| [ 2.359747] e1000e 0000:08:00.0: irq 42 for MSI/MSI-X |
| [ 2.532736] e1000e 0000:08:00.0 eth4: (PCI Express:2.5GT/s:Width x4) 00:15:17:4e:46:cb |
| [ 2.540646] e1000e 0000:08:00.0 eth4: Intel(R) PRO/1000 Network Connection |
| [ 2.547596] e1000e 0000:08:00.0 eth4: MAC: 0, PHY: 4, PBA No: D72468-003 |
| [ 2.554380] e1000e 0000:08:00.1: Interrupt Throttling Rate (ints/sec) set to dynamic conservative mode |
| [ 2.563689] e1000e 0000:08:00.1: irq 43 for MSI/MSI-X |
| [ 2.736723] e1000e 0000:08:00.1 eth5: (PCI Express:2.5GT/s:Width x4) 00:15:17:4e:46:ca |
| [ 2.744633] e1000e 0000:08:00.1 eth5: Intel(R) PRO/1000 Network Connection |
| [ 2.751584] e1000e 0000:08:00.1 eth5: MAC: 0, PHY: 4, PBA No: D72468-003 |
| [ 2.761722] FS-Cache: Loaded |
| [ 2.767636] RPC: Registered named UNIX socket transport module. |
| [ 2.774099] RPC: Registered udp transport module. |
| [ 2.780182] RPC: Registered tcp transport module. |
| [ 2.784884] RPC: Registered tcp NFSv4.1 backchannel transport module. |
| [ 2.795442] FS-Cache: Netfs 'nfs' registered for caching |
| [ 2.808779] tg3 0000:02:00.0: irq 44 for MSI/MSI-X |
| [ 2.856079] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready |
| [ 4.632639] tg3 0000:02:00.0 eth0: Link is up at 100 Mbps, full duplex |
| [ 4.635875] tg3 0000:02:00.0 eth0: Flow control is on for TX and on for RX |
| [ 4.635875] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready |
| [ 5.604572] systemd[1]: systemd 215 running in system mode. (+PAM +AUDIT +SELINUX +IMA +SYSVINIT +LIBCRYPTSETUP +GCRYPT +ACL +XZ -SECCOMP -APPARMOR) |
| [ 5.618045] systemd[1]: Detected architecture 'x86-64'. |
| [ 5.882075] systemd[1]: Inserted module 'autofs4' |
| [ 5.889147] systemd[1]: Set hostname to <cb-test-tgt>. |
| [ 5.964477] random: nonblocking pool is initialized |
| [ 6.167518] systemd[1]: Cannot add dependency job for unit dbus.socket, ignoring: Unit dbus.socket failed to load: No such file or directory. |
| [ 6.180270] systemd[1]: Cannot add dependency job for unit display-manager.service, ignoring: Unit display-manager.service failed to load: No such file or directory. |
| [ 6.195501] systemd[1]: Starting Forward Password Requests to Wall Directory Watch. |
| [ 6.203232] systemd[1]: Started Forward Password Requests to Wall Directory Watch. |
| [ 6.210817] systemd[1]: Expecting device dev-ttyS0.device... |
| [ 6.224140] systemd[1]: Starting Remote File Systems (Pre). |
| [ 6.240076] systemd[1]: Reached target Remote File Systems (Pre). |
| [ 6.246205] systemd[1]: Starting Arbitrary Executable File Formats File System Automount Point. |
| [ 6.268055] systemd[1]: Set up automount Arbitrary Executable File Formats File System Automount Point. |
| [ 6.277491] systemd[1]: Starting Dispatch Password Requests to Console Directory Watch. |
| [ 6.285581] systemd[1]: Started Dispatch Password Requests to Console Directory Watch. |
| [ 6.293507] systemd[1]: Starting Paths. |
| [ 6.308051] systemd[1]: Reached target Paths. |
| [ 6.312423] systemd[1]: Starting Encrypted Volumes. |
| [ 6.328046] systemd[1]: Reached target Encrypted Volumes. |
| [ 6.333453] systemd[1]: Starting Swap. |
| [ 6.348042] systemd[1]: Reached target Swap. |
| [ 6.352328] systemd[1]: Starting Root Slice. |
| [ 6.364055] systemd[1]: Created slice Root Slice. |
| [ 6.368775] systemd[1]: Starting User and Session Slice. |
| [ 6.384057] systemd[1]: Created slice User and Session Slice. |
| [ 6.389815] systemd[1]: Starting Delayed Shutdown Socket. |
| [ 6.404046] systemd[1]: Listening on Delayed Shutdown Socket. |
| [ 6.409807] systemd[1]: Starting /dev/initctl Compatibility Named Pipe. |
| [ 6.428046] systemd[1]: Listening on /dev/initctl Compatibility Named Pipe. |
| [ 6.435016] systemd[1]: Starting Journal Socket (/dev/log). |
| [ 6.452046] systemd[1]: Listening on Journal Socket (/dev/log). |
| [ 6.457978] systemd[1]: Starting udev Kernel Socket. |
| [ 6.472055] systemd[1]: Listening on udev Kernel Socket. |
| [ 6.477396] systemd[1]: Starting udev Control Socket. |
| [ 6.492039] systemd[1]: Listening on udev Control Socket. |
| [ 6.497462] systemd[1]: Starting Journal Socket. |
| [ 6.512048] systemd[1]: Listening on Journal Socket. |
| [ 6.517037] systemd[1]: Starting System Slice. |
| [ 6.532045] systemd[1]: Created slice System Slice. |
| [ 6.536936] systemd[1]: Starting system-getty.slice. |
| [ 6.552045] systemd[1]: Created slice system-getty.slice. |
| [ 6.557456] systemd[1]: Starting system-serial\x2dgetty.slice. |
| [ 6.572045] systemd[1]: Created slice system-serial\x2dgetty.slice. |
| [ 6.578335] systemd[1]: Starting Increase datagram queue length... |
| [ 6.596691] systemd[1]: Mounting Huge Pages File System... |
| [ 6.612656] systemd[1]: Starting udev Coldplug all Devices... |
| [ 6.898532] systemd[1]: Starting Load Kernel Modules... |
| [ 6.912558] systemd[1]: Mounting POSIX Message Queue File System... |
| [ 7.021572] systemd[1]: Started Set Up Additional Binary Formats. |
| [ 7.027749] systemd[1]: Mounting Debug File System... |
| [ 7.050904] systemd[1]: Starting Create list of required static device nodes for the current kernel... |
| [ 7.072467] systemd[1]: Starting Slices. |
| [ 7.084054] systemd[1]: Reached target Slices. |
| [ 7.088528] systemd[1]: Starting Remount Root and Kernel File Systems... |
| [ 7.116074] systemd[1]: Mounted POSIX Message Queue File System. |
| [ 7.132112] systemd[1]: Mounted Huge Pages File System. |
| [ 7.148059] systemd[1]: Started Increase datagram queue length. |
| [ 7.164079] systemd[1]: Started Load Kernel Modules. |
| [ 7.180065] systemd[1]: Mounted Debug File System. |
| [ 7.200128] systemd[1]: Started Create list of required static device nodes for the current kernel. |
| [ 7.220111] systemd[1]: Started Remount Root and Kernel File Systems. |
| [ 7.236046] systemd[1]: Started udev Coldplug all Devices. |
| [ 7.264762] systemd[1]: Started Various fixups to make systemd work better on Debian. |
| [ 7.272628] systemd[1]: Starting Load/Save Random Seed... |
| [ 7.288812] systemd[1]: Starting Create Static Device Nodes in /dev... |
| [ 7.304830] systemd[1]: Mounted Configuration File System. |
| [ 7.310368] systemd[1]: Starting Apply Kernel Variables... |
| [ 7.324897] systemd[1]: Mounted FUSE Control File System. |
| [ 7.330394] systemd[1]: Starting Syslog Socket. |
| [ 7.344104] systemd[1]: Listening on Syslog Socket. |
| [ 7.349030] systemd[1]: Starting Sockets. |
| [ 7.360126] systemd[1]: Reached target Sockets. |
| [ 7.364724] systemd[1]: Starting Journal Service... |
| [ 7.388090] systemd[1]: Started Journal Service. |
| [ 7.632825] systemd-udevd[151]: starting version 215 |
| [ 7.682179] systemd-journald[150]: Received request to flush runtime journal from PID 1 |
| [ 8.633220] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4 |
| [ 8.643485] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input2 |
| [ 8.651914] ACPI: Power Button [PWRB] |
| [ 8.655662] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input3 |
| [ 8.663436] ACPI: Power Button [PWRF] |
| [ 8.679876] FDC 0 is a post-1991 82077 |
| [ 8.684617] systemd-udevd[188]: renamed network interface eth1 to rename3 |
| [ 8.744196] systemd-udevd[181]: renamed network interface eth2 to eth6 |
| [ 8.756995] SCSI subsystem initialized |
| [ 8.757071] systemd-udevd[188]: renamed network interface eth1 to eth2 |
| [ 8.774098] i2c i2c-0: nForce2 SMBus adapter at 0x4c80 |
| [ 8.779283] i2c i2c-1: nForce2 SMBus adapter at 0x4cc0 |
| [ 8.807598] libata version 3.00 loaded. |
| [ 8.815679] sata_nv 0000:00:07.0: version 3.5 |
| [ 8.815858] ACPI: PCI Interrupt Link [LSA0] enabled at IRQ 21 |
| [ 8.822265] scsi0 : sata_nv |
| [ 8.825215] scsi1 : sata_nv |
| [ 8.828057] ata1: SATA max UDMA/133 cmd 0x5050 ctl 0x5070 bmdma 0x5030 irq 21 |
| [ 8.835197] ata2: SATA max UDMA/133 cmd 0x5058 ctl 0x5074 bmdma 0x5038 irq 21 |
| [ 8.842460] EDAC MC: Ver: 3.0.0 |
| [ 8.846361] k8temp 0000:00:18.3: Temperature readouts might be wrong - check erratum #141 |
| [ 8.854834] k8temp 0000:00:19.3: Temperature readouts might be wrong - check erratum #141 |
| [ 8.863242] pata_amd 0000:00:06.0: version 0.4.1 |
| [ 8.863899] scsi2 : pata_amd |
| [ 8.867068] scsi3 : pata_amd |
| [ 8.869994] ata3: PATA max UDMA/133 cmd 0x1f0 ctl 0x3f6 bmdma 0x5020 irq 14 |
| [ 8.876956] ata4: PATA max UDMA/133 cmd 0x170 ctl 0x376 bmdma 0x5028 irq 15 |
| [ 8.884040] MCE: In-kernel MCE decoding enabled. |
| [ 8.884518] ACPI: PCI Interrupt Link [LSA1] enabled at IRQ 20 |
| [ 8.884956] scsi4 : sata_nv |
| [ 8.885086] scsi5 : sata_nv |
| [ 8.885133] ata5: SATA max UDMA/133 cmd 0x5060 ctl 0x5078 bmdma 0x5040 irq 20 |
| [ 8.885134] ata6: SATA max UDMA/133 cmd 0x5068 ctl 0x507c bmdma 0x5048 irq 20 |
| [ 8.958473] AMD64 EDAC driver v3.4.0 |
| [ 8.962102] EDAC amd64: DRAM ECC enabled. |
| [ 8.966121] EDAC amd64: K8 revF or later detected (node 0). |
| [ 8.971719] EDAC MC: DCT0 chip selects: |
| [ 8.971720] EDAC amd64: MC: 0: 0MB 1: 0MB |
| [ 8.976430] EDAC amd64: MC: 2: 0MB 3: 0MB |
| [ 8.981136] EDAC amd64: MC: 4: 1024MB 5: 1024MB |
| [ 8.985840] EDAC amd64: MC: 6: 1024MB 7: 1024MB |
| [ 8.990568] EDAC amd64: CS4: Registered DDR2 RAM |
| [ 8.990803] input: PC Speaker as /devices/platform/pcspkr/input/input4 |
| [ 9.001706] EDAC amd64: CS5: Registered DDR2 RAM |
| [ 9.006331] EDAC amd64: CS6: Registered DDR2 RAM |
| [ 9.010949] EDAC amd64: CS7: Registered DDR2 RAM |
| [ 9.015811] EDAC MC0: Giving out device to module amd64_edac controller K8: DEV 0000:00:18.2 (INTERRUPT) |
| [ 9.025300] EDAC amd64: DRAM ECC disabled. |
| [ 9.029407] EDAC amd64: ECC disabled in the BIOS or no ECC capability, module will not load. |
| Either enable ECC checking or force module loading by setting 'ecc_enable_override'. |
| (Note that use of the override may cause unknown side effects.) |
| [ 9.053740] EDAC PCI0: Giving out device to module amd64_edac controller EDAC PCI controller: DEV 0000:00:18.2 (POLLED) |
| [ 9.152036] ata1: SATA link down (SStatus 0 SControl 300) |
| [ 9.196021] ata5: SATA link down (SStatus 0 SControl 300) |
| [ 9.235760] kvm: Nested Virtualization enabled |
| [ 9.289485] powernow_k8: fid 0x16 (3000 MHz), vid 0xa |
| [ 9.294552] powernow_k8: fid 0x14 (2800 MHz), vid 0xc |
| [ 9.299610] powernow_k8: fid 0x12 (2600 MHz), vid 0xe |
| [ 9.304661] powernow_k8: fid 0x10 (2400 MHz), vid 0x10 |
| [ 9.309799] powernow_k8: fid 0xe (2200 MHz), vid 0x12 |
| [ 9.314851] powernow_k8: fid 0xc (2000 MHz), vid 0x12 |
| [ 9.319904] powernow_k8: fid 0x2 (1000 MHz), vid 0x12 |
| [ 9.325379] powernow_k8: fid 0x16 (3000 MHz), vid 0xa |
| [ 9.330425] powernow_k8: fid 0x14 (2800 MHz), vid 0xc |
| [ 9.335479] powernow_k8: fid 0x12 (2600 MHz), vid 0xe |
| [ 9.340532] powernow_k8: fid 0x10 (2400 MHz), vid 0x10 |
| [ 9.345669] powernow_k8: fid 0xe (2200 MHz), vid 0x12 |
| [ 9.350722] powernow_k8: fid 0xc (2000 MHz), vid 0x12 |
| [ 9.355775] powernow_k8: fid 0x2 (1000 MHz), vid 0x12 |
| [ 9.362739] powernow_k8: Found 1 Dual-Core AMD Opteron(tm) Processor 8222 (4 cpu cores) (version 2.20.00) |
| [ 9.468025] ata2: SATA link down (SStatus 0 SControl 300) |
| [ 9.948069] ata6: SATA link down (SStatus 0 SControl 300) |
| [ 11.215170] Installing knfsd (copyright (C) 1996 okir@monad.swb.de). |
| [ 41.555340] *****RAPTOR ENGINEERING AUTOMATED TEST BOOT SUCCESS***** |