| [ 0.000000] Initializing cgroup subsys cpuset |
| [ 0.000000] Initializing cgroup subsys cpu |
| [ 0.000000] Initializing cgroup subsys cpuacct |
| [ 0.000000] Linux version 3.16.0-4-amd64 (debian-kernel@lists.debian.org) (gcc version 4.8.4 (Debian 4.8.4-1) ) #1 SMP Debian 3.16.7-ckt7-1 (2015-03-01) |
| [ 0.000000] Command line: root=/dev/nfs initrd=initrd-cb-test-tgt rootfstype=nfs nfsroot=10.100.1.100:/nfsroots/cb-test-tgt-03,v3,hard,nointr,tcp ip=10.100.1.12::10.100.1.1:255.255.255.0:embed-o-matic:eth0:off console=ttyS0,115200n8 consoleblank=0 rw BOOT_IMAGE=vmlinuz-cb-test-tgt |
| [ 0.000000] e820: BIOS-provided physical RAM map: |
| [ 0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009fbff] usable |
| [ 0.000000] BIOS-e820: [mem 0x000000000009fc00-0x000000000009ffff] reserved |
| [ 0.000000] BIOS-e820: [mem 0x00000000000f0000-0x00000000000fffff] reserved |
| [ 0.000000] BIOS-e820: [mem 0x0000000000100000-0x00000000bff9ffff] usable |
| [ 0.000000] BIOS-e820: [mem 0x00000000bffa0000-0x00000000bfffffff] reserved |
| [ 0.000000] BIOS-e820: [mem 0x0000000100000000-0x000000013fffffff] usable |
| [ 0.000000] NX (Execute Disable) protection: active |
| [ 0.000000] SMBIOS 2.7 present. |
| [ 0.000000] DMI: ASUS KFSN4-DRE/KFSN4-DRE, BIOS RAPTOR-NORMAL 11/21/2015 |
| [ 0.000000] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved |
| [ 0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable |
| [ 0.000000] AGP: No AGP bridge found |
| [ 0.000000] e820: last_pfn = 0x140000 max_arch_pfn = 0x400000000 |
| [ 0.000000] MTRR default type: uncachable |
| [ 0.000000] MTRR fixed ranges enabled: |
| [ 0.000000] 00000-9FFFF write-back |
| [ 0.000000] A0000-BFFFF uncachable |
| [ 0.000000] C0000-FFFFF write-back |
| [ 0.000000] MTRR variable ranges enabled: |
| [ 0.000000] 0 base 0000000000 mask FF80000000 write-back |
| [ 0.000000] 1 base 0080000000 mask FFC0000000 write-back |
| [ 0.000000] 2 base 00F8000000 mask FFFC000000 write-combining |
| [ 0.000000] 3 disabled |
| [ 0.000000] 4 disabled |
| [ 0.000000] 5 disabled |
| [ 0.000000] 6 disabled |
| [ 0.000000] 7 disabled |
| [ 0.000000] TOM2: 0000000140000000 aka 5120M |
| [ 0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106 |
| [ 0.000000] e820: last_pfn = 0xbffa0 max_arch_pfn = 0x400000000 |
| [ 0.000000] found SMP MP-table at [mem 0x000f1d20-0x000f1d2f] mapped at [ffff8800000f1d20] |
| [ 0.000000] Base memory trampoline at [ffff880000099000] 99000 size 24576 |
| [ 0.000000] init_memory_mapping: [mem 0x00000000-0x000fffff] |
| [ 0.000000] [mem 0x00000000-0x000fffff] page 4k |
| [ 0.000000] BRK [0x01af3000, 0x01af3fff] PGTABLE |
| [ 0.000000] BRK [0x01af4000, 0x01af4fff] PGTABLE |
| [ 0.000000] BRK [0x01af5000, 0x01af5fff] PGTABLE |
| [ 0.000000] init_memory_mapping: [mem 0x13fe00000-0x13fffffff] |
| [ 0.000000] [mem 0x13fe00000-0x13fffffff] page 2M |
| [ 0.000000] BRK [0x01af6000, 0x01af6fff] PGTABLE |
| [ 0.000000] init_memory_mapping: [mem 0x13c000000-0x13fdfffff] |
| [ 0.000000] [mem 0x13c000000-0x13fdfffff] page 2M |
| [ 0.000000] init_memory_mapping: [mem 0x100000000-0x13bffffff] |
| [ 0.000000] [mem 0x100000000-0x13bffffff] page 2M |
| [ 0.000000] init_memory_mapping: [mem 0x00100000-0xbff9ffff] |
| [ 0.000000] [mem 0x00100000-0x001fffff] page 4k |
| [ 0.000000] [mem 0x00200000-0xbfdfffff] page 2M |
| [ 0.000000] [mem 0xbfe00000-0xbff9ffff] page 4k |
| [ 0.000000] RAMDISK: [mem 0x7f775000-0x7fffefff] |
| [ 0.000000] ACPI: Early table checksum verification disabled |
| [ 0.000000] ACPI: RSDP 0x00000000000F1EC0 000024 (v02 CORE ) |
| [ 0.000000] ACPI: XSDT 0x00000000BFFB90E0 00006C (v01 CORE COREBOOT 00000000 CORE 00000000) |
| [ 0.000000] ACPI: FACP 0x00000000BFFBB8D0 000074 (v01 CORE COREBOOT 00000000 CORE 00000000) |
| [ 0.000000] ACPI: DSDT 0x00000000BFFB9280 002648 (v02 ASUS COREBOOT 00000001 INTL 20150204) |
| [ 0.000000] ACPI: FACS 0x00000000BFFB9240 000040 |
| [ 0.000000] ACPI: SSDT 0x00000000BFFBB9D0 0006BD (v02 CORE COREBOOT 0000002A CORE 0000002A) |
| [ 0.000000] ACPI: TCPA 0x00000000BFFBC090 000032 (v02 CORE COREBOOT 00000000 CORE 00000000) |
| [ 0.000000] ACPI: APIC 0x00000000BFFBC0D0 00008E (v01 CORE COREBOOT 00000000 CORE 00000000) |
| [ 0.000000] ACPI: SRAT 0x00000000BFFBC160 0000E8 (v01 CORE COREBOOT 00000000 CORE 00000000) |
| [ 0.000000] ACPI: SLIT 0x00000000BFFBC250 000030 (v01 CORE COREBOOT 00000000 CORE 00000000) |
| [ 0.000000] ACPI: HPET 0x00000000BFFBC280 000038 (v01 CORE COREBOOT 00000000 CORE 00000000) |
| [ 0.000000] ACPI: SRAT 0x00000000BFFBC2C0 0000E8 (v01 CORE COREBOOT 00000000 CORE 00000000) |
| [ 0.000000] ACPI: SLIT 0x00000000BFFBC3B0 000030 (v01 CORE COREBOOT 00000000 CORE 00000000) |
| [ 0.000000] ACPI: Local APIC address 0xfee00000 |
| [ 0.000000] SRAT: PXM 0 -> APIC 0x10 -> Node 0 |
| [ 0.000000] SRAT: PXM 0 -> APIC 0x11 -> Node 0 |
| [ 0.000000] SRAT: PXM 1 -> APIC 0x12 -> Node 1 |
| [ 0.000000] SRAT: PXM 1 -> APIC 0x13 -> Node 1 |
| [ 0.000000] SRAT: Node 0 PXM 0 [mem 0x00000000-0x0009ffff] |
| [ 0.000000] SRAT: Node 0 PXM 0 [mem 0x00100000-0xbfffffff] |
| [ 0.000000] SRAT: Node 0 PXM 0 [mem 0x100000000-0x13fffffff] |
| [ 0.000000] NUMA: Initialized distance table, cnt=2 |
| [ 0.000000] NUMA: Node 0 [mem 0x00000000-0x0009ffff] + [mem 0x00100000-0xbfffffff] -> [mem 0x00000000-0xbfffffff] |
| [ 0.000000] NUMA: Node 0 [mem 0x00000000-0xbfffffff] + [mem 0x100000000-0x13fffffff] -> [mem 0x00000000-0x13fffffff] |
| [ 0.000000] Initmem setup node 0 [mem 0x00000000-0x13fffffff] |
| [ 0.000000] NODE_DATA [mem 0x13fff7000-0x13fffbfff] |
| [ 0.000000] [ffffea0000000000-ffffea00045fffff] PMD -> [ffff88013b600000-ffff88013edfffff] on node 0 |
| [ 0.000000] Zone ranges: |
| [ 0.000000] DMA [mem 0x00001000-0x00ffffff] |
| [ 0.000000] DMA32 [mem 0x01000000-0xffffffff] |
| [ 0.000000] Normal [mem 0x100000000-0x13fffffff] |
| [ 0.000000] Movable zone start for each node |
| [ 0.000000] Early memory node ranges |
| [ 0.000000] node 0: [mem 0x00001000-0x0009efff] |
| [ 0.000000] node 0: [mem 0x00100000-0xbff9ffff] |
| [ 0.000000] node 0: [mem 0x100000000-0x13fffffff] |
| [ 0.000000] On node 0 totalpages: 1048382 |
| [ 0.000000] DMA zone: 56 pages used for memmap |
| [ 0.000000] DMA zone: 21 pages reserved |
| [ 0.000000] DMA zone: 3998 pages, LIFO batch:0 |
| [ 0.000000] DMA32 zone: 10695 pages used for memmap |
| [ 0.000000] DMA32 zone: 782240 pages, LIFO batch:31 |
| [ 0.000000] Normal zone: 3584 pages used for memmap |
| [ 0.000000] Normal zone: 262144 pages, LIFO batch:31 |
| [ 0.000000] Detected use of extended apic ids on hypertransport bus |
| [ 0.000000] Detected use of extended apic ids on hypertransport bus |
| [ 0.000000] ACPI: PM-Timer IO Port: 0x4008 |
| [ 0.000000] ACPI: Local APIC address 0xfee00000 |
| [ 0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x10] enabled) |
| [ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x11] enabled) |
| [ 0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x12] enabled) |
| [ 0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x13] enabled) |
| [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1]) |
| [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1]) |
| [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x02] high edge lint[0x1]) |
| [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x03] high edge lint[0x1]) |
| [ 0.000000] ACPI: IOAPIC (id[0x08] address[0xfec00000] gsi_base[0]) |
| [ 0.000000] IOAPIC[0]: apic_id 8, version 17, address 0xfec00000, GSI 0-23 |
| [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level) |
| [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 14 global_irq 14 high edge) |
| [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 15 global_irq 15 high edge) |
| [ 0.000000] ACPI: IRQ9 used by override. |
| [ 0.000000] ACPI: IRQ14 used by override. |
| [ 0.000000] ACPI: IRQ15 used by override. |
| [ 0.000000] Using ACPI (MADT) for SMP configuration information |
| [ 0.000000] ACPI: HPET id: 0x10de8201 base: 0xfed00000 |
| [ 0.000000] smpboot: Allowing 4 CPUs, 0 hotplug CPUs |
| [ 0.000000] nr_irqs_gsi: 40 |
| [ 0.000000] PM: Registered nosave memory: [mem 0x0009f000-0x0009ffff] |
| [ 0.000000] PM: Registered nosave memory: [mem 0x000a0000-0x000effff] |
| [ 0.000000] PM: Registered nosave memory: [mem 0x000f0000-0x000fffff] |
| [ 0.000000] PM: Registered nosave memory: [mem 0xbffa0000-0xbfffffff] |
| [ 0.000000] PM: Registered nosave memory: [mem 0xc0000000-0xffffffff] |
| [ 0.000000] e820: [mem 0xc0000000-0xffffffff] available for PCI devices |
| [ 0.000000] Booting paravirtualized kernel on bare hardware |
| [ 0.000000] setup_percpu: NR_CPUS:512 nr_cpumask_bits:512 nr_cpu_ids:4 nr_node_ids:2 |
| [ 0.000000] PERCPU: Embedded 27 pages/cpu @ffff88013fc00000 s80896 r8192 d21504 u524288 |
| [ 0.000000] pcpu-alloc: s80896 r8192 d21504 u524288 alloc=1*2097152 |
| [ 0.000000] pcpu-alloc: [0] 0 1 2 3 |
| [ 0.000000] Built 1 zonelists in Node order, mobility grouping on. Total pages: 1034026 |
| [ 0.000000] Policy zone: Normal |
| [ 0.000000] Kernel command line: root=/dev/nfs initrd=initrd-cb-test-tgt rootfstype=nfs nfsroot=10.100.1.100:/nfsroots/cb-test-tgt-03,v3,hard,nointr,tcp ip=10.100.1.12::10.100.1.1:255.255.255.0:embed-o-matic:eth0:off console=ttyS0,115200n8 consoleblank=0 rw BOOT_IMAGE=vmlinuz-cb-test-tgt |
| [ 0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes) |
| [ 0.000000] AGP: Checking aperture... |
| [ 0.000000] AGP: No AGP bridge found |
| [ 0.000000] AGP: Node 0: aperture [bus addr 0xeb80000000-0xeb81ffffff] (32MB) |
| [ 0.000000] Aperture beyond 4GB. Ignoring. |
| [ 0.000000] AGP: Your BIOS doesn't leave a aperture memory hole |
| [ 0.000000] AGP: Please enable the IOMMU option in the BIOS setup |
| [ 0.000000] AGP: This costs you 64MB of RAM |
| [ 0.000000] AGP: Mapping aperture over RAM [mem 0xb4000000-0xb7ffffff] (65536KB) |
| [ 0.000000] PM: Registered nosave memory: [mem 0xb4000000-0xb7ffffff] |
| [ 0.000000] Memory: 3983824K/4193528K available (5203K kernel code, 943K rwdata, 1832K rodata, 1204K init, 840K bss, 209704K reserved) |
| [ 0.000000] Hierarchical RCU implementation. |
| [ 0.000000] RCU dyntick-idle grace-period acceleration is enabled. |
| [ 0.000000] RCU restricting CPUs from NR_CPUS=512 to nr_cpu_ids=4. |
| [ 0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=4 |
| [ 0.000000] NR_IRQS:33024 nr_irqs:712 16 |
| [ 0.000000] spurious 8259A interrupt: IRQ7. |
| [ 0.000000] Console: colour VGA+ 80x25 |
| [ 0.000000] console [ttyS0] enabled |
| [ 0.000000] mempolicy: Disabling automatic NUMA balancing. Configure with numa_balancing= or the kernel.numa_balancing sysctl |
| [ 0.000000] hpet clockevent registered |
| [ 0.000000] tsc: Fast TSC calibration using PIT |
| [ 0.000000] tsc: Detected 3015.652 MHz processor |
| [ 0.000000] tsc: Marking TSC unstable due to TSCs unsynchronized |
| [ 0.016000] Calibrating delay loop (skipped), value calculated using timer frequency.. 6031.30 BogoMIPS (lpj=12062608) |
| [ 0.020001] pid_max: default: 32768 minimum: 301 |
| [ 0.024011] ACPI: Core revision 20140424 |
| [ 0.029304] ACPI: All ACPI Tables successfully acquired |
| [ 0.032231] Security Framework initialized |
| [ 0.036013] AppArmor: AppArmor disabled by boot time parameter |
| [ 0.040001] Yama: disabled by default; enable with sysctl kernel.yama.* |
| [ 0.048124] Dentry cache hash table entries: 524288 (order: 10, 4194304 bytes) |
| [ 0.057870] Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes) |
| [ 0.061244] Mount-cache hash table entries: 8192 (order: 4, 65536 bytes) |
| [ 0.064011] Mountpoint-cache hash table entries: 8192 (order: 4, 65536 bytes) |
| [ 0.068348] Initializing cgroup subsys memory |
| [ 0.072010] Initializing cgroup subsys devices |
| [ 0.076010] Initializing cgroup subsys freezer |
| [ 0.080003] Initializing cgroup subsys net_cls |
| [ 0.084006] Initializing cgroup subsys blkio |
| [ 0.088005] Initializing cgroup subsys perf_event |
| [ 0.092003] Initializing cgroup subsys net_prio |
| [ 0.096028] tseg: 0000000000 |
| [ 0.096035] CPU: Physical Processor ID: 0 |
| [ 0.100001] CPU: Processor Core ID: 0 |
| [ 0.104002] mce: CPU supports 5 MCE banks |
| [ 0.108008] LVT offset 0 assigned for vector 0xf9 |
| [ 0.112004] process: using AMD E400 aware idle routine |
| [ 0.116003] Last level iTLB entries: 4KB 512, 2MB 8, 4MB 4 |
| Last level dTLB entries: 4KB 512, 2MB 8, 4MB 4, 1GB 0 |
| tlb_flushall_shift: 6 |
| [ 0.124079] Freeing SMP alternatives memory: 20K (ffffffff81a1a000 - ffffffff81a1f000) |
| [ 0.132691] ftrace: allocating 21601 entries in 85 pages |
| [ 0.144433] ..TIMER: vector=0x30 apic1=0 pin1=0 apic2=0 pin2=0 |
| [ 0.190557] smpboot: CPU0: Dual-Core AMD Opteron(tm) Processor 8222 (fam: 0f, model: 41, stepping: 03) |
| [ 0.200000] Performance Events: AMD PMU driver. |
| [ 0.200003] ... version: 0 |
| [ 0.204000] ... bit width: 48 |
| [ 0.208000] ... generic registers: 4 |
| [ 0.212000] ... value mask: 0000ffffffffffff |
| [ 0.216000] ... max period: 00007fffffffffff |
| [ 0.220000] ... fixed-purpose events: 0 |
| [ 0.224000] ... event mask: 000000000000000f |
| [ 0.229563] NMI watchdog: enabled on all CPUs, permanently consumes one hw-PMU counter. |
| [ 0.232154] x86: Booting SMP configuration: |
| [ 0.236002] .... node #0, CPUs: #1 #2 #3 |
| [ 0.508124] x86: Booted up 1 node, 4 CPUs |
| [ 0.512001] smpboot: Total of 4 processors activated (24123.83 BogoMIPS) |
| [ 0.520104] devtmpfs: initialized |
| [ 0.529276] pinctrl core: initialized pinctrl subsystem |
| [ 0.532094] NET: Registered protocol family 16 |
| [ 0.536134] cpuidle: using governor ladder |
| [ 0.540002] cpuidle: using governor menu |
| [ 0.544005] node 0 link 1: io port [1000, 5fff] |
| [ 0.544008] TOM: 00000000c0000000 aka 3072M |
| [ 0.548002] node 0 link 1: mmio [a0000, bffff] |
| [ 0.548004] node 0 link 1: mmio [fc000000, fc5fffff] |
| [ 0.548006] node 0 link 1: mmio [f8000000, fbffffff] |
| [ 0.548007] TOM2: 0000000140000000 aka 5120M |
| [ 0.552002] bus: [bus 00-08] on node 0 link 1 |
| [ 0.552003] bus: 00 [io 0x0000-0xffff] |
| [ 0.552005] bus: 00 [mem 0x000a0000-0x000bffff] |
| [ 0.552006] bus: 00 [mem 0xc0000000-0xffffffff] |
| [ 0.552007] bus: 00 [mem 0x140000000-0xfcffffffff] |
| [ 0.552054] ACPI: bus type PCI registered |
| [ 0.556002] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5 |
| [ 0.560092] PCI: Using configuration type 1 for base access |
| [ 0.580086] ACPI: Added _OSI(Module Device) |
| [ 0.584002] ACPI: Added _OSI(Processor Device) |
| [ 0.588001] ACPI: Added _OSI(3.0 _SCP Extensions) |
| [ 0.592001] ACPI: Added _OSI(Processor Aggregator Device) |
| [ 0.600935] ACPI: Interpreter enabled |
| [ 0.604009] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S2_] (20140424/hwxface-580) |
| [ 0.612001] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S3_] (20140424/hwxface-580) |
| [ 0.622188] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S4_] (20140424/hwxface-580) |
| [ 0.632004] ACPI: (supports S0 S1 S5) |
| [ 0.635662] ACPI: Using IOAPIC for interrupt routing |
| [ 0.636027] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug |
| [ 0.645293] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-08]) |
| [ 0.648005] acpi PNP0A03:00: _OSC: OS supports [ASPM ClockPM Segments MSI] |
| [ 0.652011] acpi PNP0A03:00: _OSC: not requesting OS control; OS requires [ExtendedConfig ASPM ClockPM MSI] |
| [ 0.657571] acpi PNP0A03:00: host bridge window expanded to [io 0x0000-0x0cf7]; [io 0x03b0-0x03df] ignored |
| [ 0.660005] acpi PNP0A03:00: fail to add MMCONFIG information, can't access extended PCI configuration space under this bridge. |
| [ 0.664117] PCI host bridge to bus 0000:00 |
| [ 0.668003] pci_bus 0000:00: root bus resource [bus 00-08] |
| [ 0.672001] pci_bus 0000:00: root bus resource [io 0x0d00-0x5fff] |
| [ 0.676002] pci_bus 0000:00: root bus resource [mem 0xf8000000-0xfbffffff] |
| [ 0.680001] pci_bus 0000:00: root bus resource [mem 0xfc000000-0xfc5fffff] |
| [ 0.684001] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff] |
| [ 0.688001] pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7] |
| [ 0.692010] pci 0000:00:00.0: [10de:005e] type 00 class 0x058000 |
| [ 0.692124] pci 0000:00:01.0: [10de:0051] type 00 class 0x060100 |
| [ 0.692130] pci 0000:00:01.0: reg 0x10: [io 0x4c00-0x4c7f] |
| [ 0.692204] pci 0000:00:01.1: [10de:0052] type 00 class 0x0c0500 |
| [ 0.692210] pci 0000:00:01.1: reg 0x10: [io 0x5000-0x501f] |
| [ 0.692219] pci 0000:00:01.1: reg 0x20: [io 0x4c80-0x4cbf] |
| [ 0.692222] pci 0000:00:01.1: reg 0x24: [io 0x4cc0-0x4cff] |
| [ 0.692234] pci 0000:00:01.1: PME# supported from D3hot D3cold |
| [ 0.692301] pci 0000:00:02.0: [10de:005a] type 00 class 0x0c0310 |
| [ 0.692306] pci 0000:00:02.0: reg 0x10: [mem 0xfc500000-0xfc500fff] |
| [ 0.692326] pci 0000:00:02.0: supports D1 D2 |
| [ 0.692328] pci 0000:00:02.0: PME# supported from D0 D1 D2 D3hot D3cold |
| [ 0.692360] pci 0000:00:02.0: System wakeup disabled by ACPI |
| [ 0.696042] pci 0000:00:02.1: [10de:005b] type 00 class 0x0c0320 |
| [ 0.696048] pci 0000:00:02.1: reg 0x10: [mem 0xfc503000-0xfc5030ff] |
| [ 0.696073] pci 0000:00:02.1: supports D1 D2 |
| [ 0.696075] pci 0000:00:02.1: PME# supported from D0 D1 D2 D3hot D3cold |
| [ 0.696106] pci 0000:00:02.1: System wakeup disabled by ACPI |
| [ 0.700044] pci 0000:00:06.0: [10de:0053] type 00 class 0x01018a |
| [ 0.700057] pci 0000:00:06.0: reg 0x20: [io 0x5020-0x502f] |
| [ 0.700063] pci 0000:00:06.0: legacy IDE quirk: reg 0x10: [io 0x01f0-0x01f7] |
| [ 0.704001] pci 0000:00:06.0: legacy IDE quirk: reg 0x14: [io 0x03f6] |
| [ 0.708004] pci 0000:00:06.0: legacy IDE quirk: reg 0x18: [io 0x0170-0x0177] |
| [ 0.712001] pci 0000:00:06.0: legacy IDE quirk: reg 0x1c: [io 0x0376] |
| [ 0.716063] pci 0000:00:07.0: [10de:0054] type 00 class 0x010185 |
| [ 0.716069] pci 0000:00:07.0: reg 0x10: [io 0x5050-0x5057] |
| [ 0.716072] pci 0000:00:07.0: reg 0x14: [io 0x5070-0x5073] |
| [ 0.716076] pci 0000:00:07.0: reg 0x18: [io 0x5058-0x505f] |
| [ 0.716079] pci 0000:00:07.0: reg 0x1c: [io 0x5074-0x5077] |
| [ 0.716083] pci 0000:00:07.0: reg 0x20: [io 0x5030-0x503f] |
| [ 0.716086] pci 0000:00:07.0: reg 0x24: [mem 0xfc501000-0xfc501fff] |
| [ 0.716150] pci 0000:00:08.0: [10de:0055] type 00 class 0x010185 |
| [ 0.716156] pci 0000:00:08.0: reg 0x10: [io 0x5060-0x5067] |
| [ 0.716159] pci 0000:00:08.0: reg 0x14: [io 0x5078-0x507b] |
| [ 0.716163] pci 0000:00:08.0: reg 0x18: [io 0x5068-0x506f] |
| [ 0.716166] pci 0000:00:08.0: reg 0x1c: [io 0x507c-0x507f] |
| [ 0.716170] pci 0000:00:08.0: reg 0x20: [io 0x5040-0x504f] |
| [ 0.716173] pci 0000:00:08.0: reg 0x24: [mem 0xfc502000-0xfc502fff] |
| [ 0.716237] pci 0000:00:09.0: [10de:005c] type 01 class 0x060400 |
| [ 0.716279] pci 0000:00:09.0: System wakeup disabled by ACPI |
| [ 0.720041] pci 0000:00:0b.0: [10de:005d] type 01 class 0x060400 |
| [ 0.720061] pci 0000:00:0b.0: PME# supported from D0 D1 D2 D3hot D3cold |
| [ 0.720093] pci 0000:00:0b.0: System wakeup disabled by ACPI |
| [ 0.724041] pci 0000:00:0c.0: [10de:005d] type 01 class 0x060400 |
| [ 0.724061] pci 0000:00:0c.0: PME# supported from D0 D1 D2 D3hot D3cold |
| [ 0.724092] pci 0000:00:0c.0: System wakeup disabled by ACPI |
| [ 0.728041] pci 0000:00:0d.0: [10de:005d] type 01 class 0x060400 |
| [ 0.728059] pci 0000:00:0d.0: PME# supported from D0 D1 D2 D3hot D3cold |
| [ 0.728091] pci 0000:00:0d.0: System wakeup disabled by ACPI |
| [ 0.732041] pci 0000:00:0e.0: [10de:005d] type 01 class 0x060400 |
| [ 0.732060] pci 0000:00:0e.0: PME# supported from D0 D1 D2 D3hot D3cold |
| [ 0.732092] pci 0000:00:0e.0: System wakeup disabled by ACPI |
| [ 0.736046] pci 0000:00:18.0: [1022:1100] type 00 class 0x060000 |
| [ 0.736113] pci 0000:00:18.1: [1022:1101] type 00 class 0x060000 |
| [ 0.736175] pci 0000:00:18.2: [1022:1102] type 00 class 0x060000 |
| [ 0.736236] pci 0000:00:18.3: [1022:1103] type 00 class 0x060000 |
| [ 0.736300] pci 0000:00:19.0: [1022:1100] type 00 class 0x060000 |
| [ 0.736367] pci 0000:00:19.1: [1022:1101] type 00 class 0x060000 |
| [ 0.736427] pci 0000:00:19.2: [1022:1102] type 00 class 0x060000 |
| [ 0.736489] pci 0000:00:19.3: [1022:1103] type 00 class 0x060000 |
| [ 0.736587] pci 0000:01:04.0: [18ca:0020] type 00 class 0x030000 |
| [ 0.736597] pci 0000:01:04.0: reg 0x10: [mem 0xf8000000-0xfbffffff pref] |
| [ 0.736602] pci 0000:01:04.0: reg 0x14: [mem 0xfc200000-0xfc23ffff] |
| [ 0.736608] pci 0000:01:04.0: reg 0x18: [io 0x3000-0x307f] |
| [ 0.736638] pci 0000:01:04.0: supports D1 D2 |
| [ 0.736689] pci 0000:00:09.0: PCI bridge to [bus 01] |
| [ 0.740002] pci 0000:00:09.0: bridge window [io 0x3000-0x3fff] |
| [ 0.740005] pci 0000:00:09.0: bridge window [mem 0xfc200000-0xfc2fffff] |
| [ 0.740007] pci 0000:00:09.0: bridge window [mem 0xf8000000-0xfbffffff pref] |
| [ 0.740057] pci 0000:02:00.0: [14e4:1659] type 00 class 0x020000 |
| [ 0.740069] pci 0000:02:00.0: reg 0x10: [mem 0xfc300000-0xfc30ffff 64bit] |
| [ 0.740092] pci 0000:02:00.0: reg 0x30: [mem 0x0d480000-0x0d48ffff pref] |
| [ 0.740132] pci 0000:02:00.0: PME# supported from D3hot D3cold |
| [ 0.740184] pci 0000:02:00.0: disabling ASPM on pre-1.1 PCIe device. You can enable it with 'pcie_aspm=force' |
| [ 0.744007] pci 0000:00:0b.0: PCI bridge to [bus 02] |
| [ 0.748003] pci 0000:00:0b.0: bridge window [mem 0xfc300000-0xfc3fffff] |
| [ 0.748053] pci 0000:03:00.0: [14e4:1659] type 00 class 0x020000 |
| [ 0.748065] pci 0000:03:00.0: reg 0x10: [mem 0xfc400000-0xfc40ffff 64bit] |
| [ 0.748126] pci 0000:03:00.0: PME# supported from D3hot D3cold |
| [ 0.748176] pci 0000:03:00.0: disabling ASPM on pre-1.1 PCIe device. You can enable it with 'pcie_aspm=force' |
| [ 0.752005] pci 0000:00:0c.0: PCI bridge to [bus 03] |
| [ 0.756003] pci 0000:00:0c.0: bridge window [mem 0xfc400000-0xfc4fffff] |
| [ 0.756041] pci 0000:00:0d.0: PCI bridge to [bus 04] |
| [ 0.760046] pci 0000:05:00.0: [111d:8018] type 01 class 0x060400 |
| [ 0.760086] pci 0000:05:00.0: PME# supported from D0 D3hot D3cold |
| [ 0.760132] pci 0000:05:00.0: disabling ASPM on pre-1.1 PCIe device. You can enable it with 'pcie_aspm=force' |
| [ 0.764004] pci 0000:00:0e.0: PCI bridge to [bus 05-08] |
| [ 0.768002] pci 0000:00:0e.0: bridge window [io 0x1000-0x2fff] |
| [ 0.768004] pci 0000:00:0e.0: bridge window [mem 0xfc000000-0xfc1fffff] |
| [ 0.768049] pci 0000:06:00.0: [111d:8018] type 01 class 0x060400 |
| [ 0.768097] pci 0000:06:00.0: PME# supported from D0 D3hot D3cold |
| [ 0.768144] pci 0000:06:00.0: disabling ASPM on pre-1.1 PCIe device. You can enable it with 'pcie_aspm=force' |
| [ 0.772008] pci 0000:06:01.0: [111d:8018] type 01 class 0x060400 |
| [ 0.776011] pci 0000:06:01.0: PME# supported from D0 D3hot D3cold |
| [ 0.776057] pci 0000:06:00.0: disabling ASPM on pre-1.1 PCIe device. You can enable it with 'pcie_aspm=force' |
| [ 0.780020] pci 0000:05:00.0: PCI bridge to [bus 06-08] |
| [ 0.784005] pci 0000:05:00.0: bridge window [io 0x1000-0x2fff] |
| [ 0.784009] pci 0000:05:00.0: bridge window [mem 0xfc000000-0xfc1fffff] |
| [ 0.784069] pci 0000:07:00.0: [8086:10bc] type 00 class 0x020000 |
| [ 0.784081] pci 0000:07:00.0: reg 0x10: [mem 0xfc000000-0xfc01ffff] |
| [ 0.784091] pci 0000:07:00.0: reg 0x14: [mem 0xfc020000-0xfc03ffff] |
| [ 0.784100] pci 0000:07:00.0: reg 0x18: [io 0x1000-0x101f] |
| [ 0.784132] pci 0000:07:00.0: reg 0x30: [mem 0xfc040000-0xfc05ffff pref] |
| [ 0.784173] pci 0000:07:00.0: PME# supported from D0 D3hot D3cold |
| [ 0.784234] pci 0000:07:00.1: [8086:10bc] type 00 class 0x020000 |
| [ 0.784246] pci 0000:07:00.1: reg 0x10: [mem 0xfc060000-0xfc07ffff] |
| [ 0.784256] pci 0000:07:00.1: reg 0x14: [mem 0xfc080000-0xfc09ffff] |
| [ 0.784265] pci 0000:07:00.1: reg 0x18: [io 0x1020-0x103f] |
| [ 0.784296] pci 0000:07:00.1: reg 0x30: [mem 0xfc0a0000-0xfc0bffff pref] |
| [ 0.784338] pci 0000:07:00.1: PME# supported from D0 D3hot D3cold |
| [ 0.784392] pci 0000:07:00.0: disabling ASPM on pre-1.1 PCIe device. You can enable it with 'pcie_aspm=force' |
| [ 0.788009] pci 0000:06:00.0: PCI bridge to [bus 07] |
| [ 0.792005] pci 0000:06:00.0: bridge window [io 0x1000-0x1fff] |
| [ 0.792009] pci 0000:06:00.0: bridge window [mem 0xfc000000-0xfc0fffff] |
| [ 0.792071] pci 0000:08:00.0: [8086:10bc] type 00 class 0x020000 |
| [ 0.792083] pci 0000:08:00.0: reg 0x10: [mem 0xfc100000-0xfc11ffff] |
| [ 0.792092] pci 0000:08:00.0: reg 0x14: [mem 0xfc120000-0xfc13ffff] |
| [ 0.792102] pci 0000:08:00.0: reg 0x18: [io 0x2000-0x201f] |
| [ 0.792133] pci 0000:08:00.0: reg 0x30: [mem 0xfc140000-0xfc15ffff pref] |
| [ 0.792175] pci 0000:08:00.0: PME# supported from D0 D3hot |
| [ 0.792236] pci 0000:08:00.1: [8086:10bc] type 00 class 0x020000 |
| [ 0.792248] pci 0000:08:00.1: reg 0x10: [mem 0xfc160000-0xfc17ffff] |
| [ 0.792257] pci 0000:08:00.1: reg 0x14: [mem 0xfc180000-0xfc19ffff] |
| [ 0.792266] pci 0000:08:00.1: reg 0x18: [io 0x2020-0x203f] |
| [ 0.792298] pci 0000:08:00.1: reg 0x30: [mem 0xfc1a0000-0xfc1bffff pref] |
| [ 0.792339] pci 0000:08:00.1: PME# supported from D0 D3hot |
| [ 0.792394] pci 0000:08:00.0: disabling ASPM on pre-1.1 PCIe device. You can enable it with 'pcie_aspm=force' |
| [ 0.796009] pci 0000:06:01.0: PCI bridge to [bus 08] |
| [ 0.800005] pci 0000:06:01.0: bridge window [io 0x2000-0x2fff] |
| [ 0.800009] pci 0000:06:01.0: bridge window [mem 0xfc100000-0xfc1fffff] |
| [ 0.800044] pci_bus 0000:00: on NUMA node 0 |
| [ 0.800101] ACPI: PCI Interrupt Link [LNKA] (IRQs *16 17 18 19) |
| [ 0.808051] ACPI: PCI Interrupt Link [LNKB] (IRQs 16 *17 18 19) |
| [ 0.813545] ACPI: PCI Interrupt Link [LNKC] (IRQs 16 17 18 19) *0, disabled. |
| [ 0.821217] ACPI: PCI Interrupt Link [LNKD] (IRQs 16 17 18 19) *0, disabled. |
| [ 0.828246] ACPI: PCI Interrupt Link [LNKE] (IRQs 16 17 18 19) *0, disabled. |
| [ 0.834710] ACPI: PCI Interrupt Link [LLAS] (IRQs 20 21 22 23) *0, disabled. |
| [ 0.838708] ACPI: PCI Interrupt Link [LUOH] (IRQs 20 21 22 *23) |
| [ 0.844988] ACPI: PCI Interrupt Link [LUEH] (IRQs 20 21 *22 23) |
| [ 0.849546] ACPI: PCI Interrupt Link [LAUD] (IRQs 20 21 22 23) *0, disabled. |
| [ 0.858432] ACPI: PCI Interrupt Link [LMOD] (IRQs 20 21 22 23) *0, disabled. |
| [ 0.865600] ACPI: PCI Interrupt Link [LPA0] (IRQs 20 21 22 23) *0, disabled. |
| [ 0.872243] ACPI: PCI Interrupt Link [LSA0] (IRQs 20 *21 22 23) |
| [ 0.877543] ACPI: PCI Interrupt Link [LSA1] (IRQs *20 21 22 23) |
| [ 0.884909] ACPI: PCI Interrupt Link [LEMA] (IRQs 20 21 22 23) *0, disabled. |
| [ 0.892245] ACPI: PCI Interrupt Link [LUB0] (IRQs 20 21 22 23) *0, disabled. |
| [ 0.898709] ACPI: PCI Interrupt Link [LUB2] (IRQs 20 21 22 23) *0, disabled. |
| [ 0.902708] ACPI: PCI Interrupt Link [LKSM] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled. |
| [ 0.911177] ACPI: PCI Interrupt Link [LNIA] (IRQs 16) *0, disabled. |
| [ 0.917600] ACPI: PCI Interrupt Link [LNIB] (IRQs 17) *0, disabled. |
| [ 0.924009] ACPI: PCI Interrupt Link [LNIC] (IRQs 18) *0, disabled. |
| [ 0.929876] ACPI: PCI Interrupt Link [LNND] (IRQs 19) *0, disabled. |
| [ 0.936401] ACPI: Enabled 1 GPEs in block 00 to 1F |
| [ 0.940091] vgaarb: setting as boot device: PCI:0000:01:04.0 |
| [ 0.944000] vgaarb: device added: PCI:0000:01:04.0,decodes=io+mem,owns=io+mem,locks=none |
| [ 0.952008] vgaarb: loaded |
| [ 0.956001] vgaarb: bridge control possible 0000:01:04.0 |
| [ 0.960117] PCI: Using ACPI for IRQ routing |
| [ 0.968003] PCI: pci_cache_line_size set to 64 bytes |
| [ 0.968064] e820: reserve RAM buffer [mem 0x0009fc00-0x0009ffff] |
| [ 0.968066] e820: reserve RAM buffer [mem 0xbffa0000-0xbfffffff] |
| [ 0.968256] HPET: 3 timers in total, 0 timers will be used for per-cpu timer |
| [ 0.972005] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 31 |
| [ 0.980191] hpet0: 3 comparators, 32-bit 25.000000 MHz counter |
| [ 0.988041] Switched to clocksource hpet |
| [ 1.000768] pnp: PnP ACPI init |
| [ 1.003849] ACPI: bus type PNP registered |
| [ 1.008257] pnp 00:00: Plug and Play ACPI device, IDs PNP0303 PNP030b (active) |
| [ 1.008308] pnp 00:01: Plug and Play ACPI device, IDs PNP0f03 PNP0f13 (active) |
| [ 1.008362] pnp 00:02: Plug and Play ACPI device, IDs PNP0501 (active) |
| [ 1.008415] pnp 00:03: Plug and Play ACPI device, IDs PNP0501 (active) |
| [ 1.008442] pnp 00:04: [dma 2] |
| [ 1.008467] pnp 00:04: Plug and Play ACPI device, IDs PNP0700 (active) |
| [ 1.008482] pnp: PnP ACPI: found 5 devices |
| [ 1.012579] ACPI: bus type PNP unregistered |
| [ 1.023969] pci 0000:02:00.0: can't claim BAR 6 [mem 0x0d480000-0x0d48ffff pref]: no compatible bridge window |
| [ 1.033930] pci 0000:00:09.0: PCI bridge to [bus 01] |
| [ 1.038891] pci 0000:00:09.0: bridge window [io 0x3000-0x3fff] |
| [ 1.044984] pci 0000:00:09.0: bridge window [mem 0xfc200000-0xfc2fffff] |
| [ 1.051767] pci 0000:00:09.0: bridge window [mem 0xf8000000-0xfbffffff pref] |
| [ 1.058992] pci 0000:02:00.0: BAR 6: assigned [mem 0xfc310000-0xfc31ffff pref] |
| [ 1.066209] pci 0000:00:0b.0: PCI bridge to [bus 02] |
| [ 1.071173] pci 0000:00:0b.0: bridge window [mem 0xfc300000-0xfc3fffff] |
| [ 1.077960] pci 0000:00:0c.0: PCI bridge to [bus 03] |
| [ 1.082925] pci 0000:00:0c.0: bridge window [mem 0xfc400000-0xfc4fffff] |
| [ 1.089712] pci 0000:00:0d.0: PCI bridge to [bus 04] |
| [ 1.094679] pci 0000:06:00.0: PCI bridge to [bus 07] |
| [ 1.099643] pci 0000:06:00.0: bridge window [io 0x1000-0x1fff] |
| [ 1.105738] pci 0000:06:00.0: bridge window [mem 0xfc000000-0xfc0fffff] |
| [ 1.112529] pci 0000:06:01.0: PCI bridge to [bus 08] |
| [ 1.117486] pci 0000:06:01.0: bridge window [io 0x2000-0x2fff] |
| [ 1.123573] pci 0000:06:01.0: bridge window [mem 0xfc100000-0xfc1fffff] |
| [ 1.130364] pci 0000:05:00.0: PCI bridge to [bus 06-08] |
| [ 1.135582] pci 0000:05:00.0: bridge window [io 0x1000-0x2fff] |
| [ 1.141669] pci 0000:05:00.0: bridge window [mem 0xfc000000-0xfc1fffff] |
| [ 1.148459] pci 0000:00:0e.0: PCI bridge to [bus 05-08] |
| [ 1.153678] pci 0000:00:0e.0: bridge window [io 0x1000-0x2fff] |
| [ 1.159762] pci 0000:00:0e.0: bridge window [mem 0xfc000000-0xfc1fffff] |
| [ 1.166542] pci_bus 0000:00: resource 4 [io 0x0d00-0x5fff] |
| [ 1.166544] pci_bus 0000:00: resource 5 [mem 0xf8000000-0xfbffffff] |
| [ 1.166546] pci_bus 0000:00: resource 6 [mem 0xfc000000-0xfc5fffff] |
| [ 1.166548] pci_bus 0000:00: resource 7 [mem 0x000a0000-0x000bffff] |
| [ 1.166550] pci_bus 0000:00: resource 8 [io 0x0000-0x0cf7] |
| [ 1.166552] pci_bus 0000:01: resource 0 [io 0x3000-0x3fff] |
| [ 1.166554] pci_bus 0000:01: resource 1 [mem 0xfc200000-0xfc2fffff] |
| [ 1.166556] pci_bus 0000:01: resource 2 [mem 0xf8000000-0xfbffffff pref] |
| [ 1.166558] pci_bus 0000:02: resource 1 [mem 0xfc300000-0xfc3fffff] |
| [ 1.166561] pci_bus 0000:03: resource 1 [mem 0xfc400000-0xfc4fffff] |
| [ 1.166563] pci_bus 0000:05: resource 0 [io 0x1000-0x2fff] |
| [ 1.166565] pci_bus 0000:05: resource 1 [mem 0xfc000000-0xfc1fffff] |
| [ 1.166567] pci_bus 0000:06: resource 0 [io 0x1000-0x2fff] |
| [ 1.166569] pci_bus 0000:06: resource 1 [mem 0xfc000000-0xfc1fffff] |
| [ 1.166571] pci_bus 0000:07: resource 0 [io 0x1000-0x1fff] |
| [ 1.166573] pci_bus 0000:07: resource 1 [mem 0xfc000000-0xfc0fffff] |
| [ 1.166576] pci_bus 0000:08: resource 0 [io 0x2000-0x2fff] |
| [ 1.166577] pci_bus 0000:08: resource 1 [mem 0xfc100000-0xfc1fffff] |
| [ 1.166651] NET: Registered protocol family 2 |
| [ 1.171325] TCP established hash table entries: 32768 (order: 6, 262144 bytes) |
| [ 1.178749] TCP bind hash table entries: 32768 (order: 7, 524288 bytes) |
| [ 1.185665] TCP: Hash tables configured (established 32768 bind 32768) |
| [ 1.192276] TCP: reno registered |
| [ 1.195509] UDP hash table entries: 2048 (order: 4, 65536 bytes) |
| [ 1.201563] UDP-Lite hash table entries: 2048 (order: 4, 65536 bytes) |
| [ 1.208176] NET: Registered protocol family 1 |
| [ 1.212823] ACPI: PCI Interrupt Link [LUB0] enabled at IRQ 23 |
| [ 1.218796] ACPI: PCI Interrupt Link [LUB2] enabled at IRQ 22 |
| [ 1.224637] pci 0000:00:00.0: Found enabled HT MSI Mapping |
| [ 1.230145] pci 0000:00:00.0: Found enabled HT MSI Mapping |
| [ 1.235633] pci 0000:00:0b.0: Found disabled HT MSI Mapping |
| [ 1.241207] pci 0000:00:00.0: Found enabled HT MSI Mapping |
| [ 1.246717] pci 0000:00:00.0: Found enabled HT MSI Mapping |
| [ 1.252203] pci 0000:00:0c.0: Found disabled HT MSI Mapping |
| [ 1.257779] pci 0000:00:00.0: Found enabled HT MSI Mapping |
| [ 1.263289] pci 0000:00:00.0: Found enabled HT MSI Mapping |
| [ 1.268774] pci 0000:00:0d.0: Found disabled HT MSI Mapping |
| [ 1.274349] pci 0000:00:00.0: Found enabled HT MSI Mapping |
| [ 1.279863] pci 0000:00:00.0: Found enabled HT MSI Mapping |
| [ 1.285345] pci 0000:00:0e.0: Found disabled HT MSI Mapping |
| [ 1.290920] pci 0000:00:00.0: Found enabled HT MSI Mapping |
| [ 1.296420] pci 0000:01:04.0: Video device with shadowed ROM |
| [ 1.296445] PCI: CLS 64 bytes, default 64 |
| [ 1.296525] Unpacking initramfs... |
| [ 1.463798] Freeing initrd memory: 8744K (ffff88007f775000 - ffff88007ffff000) |
| [ 1.471443] PCI-DMA: Disabling AGP. |
| [ 1.475075] PCI-DMA: aperture base @ b4000000 size 65536 KB |
| [ 1.480648] PCI-DMA: using GART IOMMU. |
| [ 1.484402] PCI-DMA: Reserving 64MB of IOMMU area in the AGP aperture |
| [ 1.494581] platform rtc_cmos: registered platform RTC device (no PNP device found) |
| [ 1.502392] microcode: AMD CPU family 0xf not supported |
| [ 1.508032] futex hash table entries: 1024 (order: 4, 65536 bytes) |
| [ 1.514274] audit: initializing netlink subsys (disabled) |
| [ 1.519710] audit: type=2000 audit(1448129304.516:1): initialized |
| [ 1.526232] HugeTLB registered 2 MB page size, pre-allocated 0 pages |
| [ 1.532607] zbud: loaded |
| [ 1.535337] VFS: Disk quotas dquot_6.5.2 |
| [ 1.539284] Dquot-cache hash table entries: 512 (order 0, 4096 bytes) |
| [ 1.545790] msgmni has been set to 7926 |
| [ 1.550059] alg: No test for stdrng (krng) |
| [ 1.554203] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252) |
| [ 1.561667] io scheduler noop registered |
| [ 1.565592] io scheduler deadline registered |
| [ 1.569910] io scheduler cfq registered (default) |
| [ 1.574911] pci_hotplug: PCI Hot Plug PCI Core version: 0.5 |
| [ 1.580499] pciehp: PCI Express Hot Plug Controller Driver version: 0.4 |
| [ 1.587194] GHES: HEST is not enabled! |
| [ 1.591030] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled |
| [ 1.617563] 00:02: ttyS0 at I/O 0x3f8 (irq = 4, base_baud = 115200) is a 16550A |
| [ 1.645172] 00:03: ttyS1 at I/O 0x2f8 (irq = 3, base_baud = 115200) is a 16550A |
| [ 1.652892] Linux agpgart interface v0.103 |
| [ 1.657105] i8042: PNP: PS/2 Controller [PNP0303:KBD,PNP0f03:MOU] at 0x60,0x64 irq 1,12 |
| [ 1.667319] serio: i8042 KBD port at 0x60,0x64 irq 1 |
| [ 1.672292] serio: i8042 AUX port at 0x60,0x64 irq 12 |
| [ 1.677568] mousedev: PS/2 mouse device common for all mice |
| [ 1.683222] rtc_cmos rtc_cmos: RTC can wake from S4 |
| [ 1.688255] rtc_cmos rtc_cmos: rtc core: registered rtc_cmos as rtc0 |
| [ 1.694628] rtc_cmos rtc_cmos: alarms up to one year, y3k, 114 bytes nvram, hpet irqs |
| [ 1.702470] ledtrig-cpu: registered to indicate activity on CPUs |
| [ 1.708568] AMD IOMMUv2 driver by Joerg Roedel <joerg.roedel@amd.com> |
| [ 1.715006] AMD IOMMUv2 functionality not available on this system |
| [ 1.721288] TCP: cubic registered |
| [ 1.724678] NET: Registered protocol family 10 |
| [ 1.729421] mip6: Mobile IPv6 |
| [ 1.732392] NET: Registered protocol family 17 |
| [ 1.736836] mpls_gso: MPLS GSO support |
| [ 1.740992] registered taskstats version 1 |
| [ 1.745690] rtc_cmos rtc_cmos: setting system clock to 2015-11-21 18:08:26 UTC (1448129306) |
| [ 1.754100] PM: Hibernation image not present or could not be loaded. |
| [ 1.755371] Freeing unused kernel memory: 1204K (ffffffff818ed000 - ffffffff81a1a000) |
| [ 1.763227] Write protecting the kernel read-only data: 8192k |
| [ 1.771379] Freeing unused kernel memory: 928K (ffff880001518000 - ffff880001600000) |
| [ 1.779659] Freeing unused kernel memory: 216K (ffff8800017ca000 - ffff880001800000) |
| [ 1.796060] systemd-udevd[72]: starting version 215 |
| [ 1.801330] random: systemd-udevd urandom read with 3 bits of entropy available |
| [ 1.818053] pps_core: LinuxPPS API ver. 1 registered |
| [ 1.823033] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it> |
| [ 1.832347] ACPI: bus type USB registered |
| [ 1.836407] usbcore: registered new interface driver usbfs |
| [ 1.836488] PTP clock support registered |
| [ 1.846495] usbcore: registered new interface driver hub |
| [ 1.851867] usbcore: registered new device driver usb |
| [ 1.857669] tg3.c:v3.137 (May 11, 2014) |
| [ 1.861551] tg3 0000:02:00.0: enabling device (0004 -> 0006) |
| [ 1.861615] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver |
| [ 1.874319] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver |
| [ 1.874357] ACPI: PCI Interrupt Link [LNIB] enabled at IRQ 17 |
| [ 1.886454] e1000e: Intel(R) PRO/1000 Network Driver - 2.3.2-k |
| [ 1.886586] ehci-pci: EHCI PCI platform driver |
| [ 1.886827] ehci-pci 0000:00:02.1: EHCI Host Controller |
| [ 1.886836] ehci-pci 0000:00:02.1: new USB bus registered, assigned bus number 1 |
| [ 1.886846] ehci-pci 0000:00:02.1: debug port 1 |
| [ 1.886881] ehci-pci 0000:00:02.1: cache line size of 64 is not supported |
| [ 1.886902] ehci-pci 0000:00:02.1: irq 22, io mem 0xfc503000 |
| [ 1.896022] ehci-pci 0000:00:02.1: USB 2.0 started, EHCI 1.00 |
| [ 1.896071] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002 |
| [ 1.896073] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 |
| [ 1.896074] usb usb1: Product: EHCI Host Controller |
| [ 1.896075] usb usb1: Manufacturer: Linux 3.16.0-4-amd64 ehci_hcd |
| [ 1.896076] usb usb1: SerialNumber: 0000:00:02.1 |
| [ 1.896276] hub 1-0:1.0: USB hub found |
| [ 1.896285] hub 1-0:1.0: 10 ports detected |
| [ 1.962635] e1000e: Copyright(c) 1999 - 2014 Intel Corporation. |
| [ 1.968824] ohci-pci: OHCI PCI platform driver |
| [ 1.968899] ACPI: PCI Interrupt Link [LNND] enabled at IRQ 19 |
| [ 1.969013] e1000e 0000:07:00.0: Interrupt Throttling Rate (ints/sec) set to dynamic conservative mode |
| [ 1.969039] e1000e 0000:07:00.0: irq 40 for MSI/MSI-X |
| [ 1.988431] ohci-pci 0000:00:02.0: OHCI PCI host controller |
| [ 1.994098] ohci-pci 0000:00:02.0: new USB bus registered, assigned bus number 2 |
| [ 2.001513] ohci-pci 0000:00:02.0: irq 23, io mem 0xfc500000 |
| [ 2.029842] tg3 0000:02:00.0 eth0: Tigon3 [partno(BCM95721) rev 4201] (PCI Express) MAC address 00:23:54:37:d4:d3 |
| [ 2.040102] tg3 0000:02:00.0 eth0: attached PHY is 5750 (10/100/1000Base-T Ethernet) (WireSpeed[1], EEE[0]) |
| [ 2.049831] tg3 0000:02:00.0 eth0: RXcsums[1] LinkChgREG[0] MIirq[0] ASF[0] TSOcap[1] |
| [ 2.057657] tg3 0000:02:00.0 eth0: dma_rwctrl[76180000] dma_mask[64-bit] |
| [ 2.062052] usb usb2: New USB device found, idVendor=1d6b, idProduct=0001 |
| [ 2.062053] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1 |
| [ 2.062054] usb usb2: Product: OHCI PCI host controller |
| [ 2.062055] usb usb2: Manufacturer: Linux 3.16.0-4-amd64 ohci_hcd |
| [ 2.062056] usb usb2: SerialNumber: 0000:00:02.0 |
| [ 2.062247] hub 2-0:1.0: USB hub found |
| [ 2.062257] hub 2-0:1.0: 10 ports detected |
| [ 2.102152] tg3 0000:03:00.0: enabling device (0004 -> 0006) |
| [ 2.107932] ACPI: PCI Interrupt Link [LNIA] enabled at IRQ 16 |
| [ 2.144784] e1000e 0000:07:00.0 eth1: (PCI Express:2.5GT/s:Width x4) 00:15:17:4e:46:c9 |
| [ 2.151636] tg3 0000:03:00.0 eth2: Tigon3 [partno(BCM95721) rev 4201] (PCI Express) MAC address 00:23:54:37:d5:e9 |
| [ 2.151638] tg3 0000:03:00.0 eth2: attached PHY is 5750 (10/100/1000Base-T Ethernet) (WireSpeed[1], EEE[0]) |
| [ 2.151639] tg3 0000:03:00.0 eth2: RXcsums[1] LinkChgREG[0] MIirq[0] ASF[0] TSOcap[1] |
| [ 2.151640] tg3 0000:03:00.0 eth2: dma_rwctrl[76180000] dma_mask[64-bit] |
| [ 2.187174] e1000e 0000:07:00.0 eth1: Intel(R) PRO/1000 Network Connection |
| [ 2.194117] e1000e 0000:07:00.0 eth1: MAC: 0, PHY: 4, PBA No: D72468-003 |
| [ 2.200974] ACPI: PCI Interrupt Link [LNIC] enabled at IRQ 18 |
| [ 2.206800] e1000e 0000:07:00.1: Interrupt Throttling Rate (ints/sec) set to dynamic conservative mode |
| [ 2.216117] e1000e 0000:07:00.1: irq 41 for MSI/MSI-X |
| [ 2.392715] e1000e 0000:07:00.1 eth3: (PCI Express:2.5GT/s:Width x4) 00:15:17:4e:46:c8 |
| [ 2.400623] e1000e 0000:07:00.1 eth3: Intel(R) PRO/1000 Network Connection |
| [ 2.407571] e1000e 0000:07:00.1 eth3: MAC: 0, PHY: 4, PBA No: D72468-003 |
| [ 2.414374] e1000e 0000:08:00.0: Interrupt Throttling Rate (ints/sec) set to dynamic conservative mode |
| [ 2.423686] e1000e 0000:08:00.0: irq 42 for MSI/MSI-X |
| [ 2.596706] e1000e 0000:08:00.0 eth4: (PCI Express:2.5GT/s:Width x4) 00:15:17:4e:46:cb |
| [ 2.604619] e1000e 0000:08:00.0 eth4: Intel(R) PRO/1000 Network Connection |
| [ 2.611568] e1000e 0000:08:00.0 eth4: MAC: 0, PHY: 4, PBA No: D72468-003 |
| [ 2.618346] e1000e 0000:08:00.1: Interrupt Throttling Rate (ints/sec) set to dynamic conservative mode |
| [ 2.627658] e1000e 0000:08:00.1: irq 43 for MSI/MSI-X |
| [ 2.800700] e1000e 0000:08:00.1 eth5: (PCI Express:2.5GT/s:Width x4) 00:15:17:4e:46:ca |
| [ 2.808607] e1000e 0000:08:00.1 eth5: Intel(R) PRO/1000 Network Connection |
| [ 2.815559] e1000e 0000:08:00.1 eth5: MAC: 0, PHY: 4, PBA No: D72468-003 |
| [ 2.825720] FS-Cache: Loaded |
| [ 2.831631] RPC: Registered named UNIX socket transport module. |
| [ 2.838058] RPC: Registered udp transport module. |
| [ 2.844139] RPC: Registered tcp transport module. |
| [ 2.850222] RPC: Registered tcp NFSv4.1 backchannel transport module. |
| [ 2.860878] FS-Cache: Netfs 'nfs' registered for caching |
| [ 2.872091] tg3 0000:02:00.0: irq 44 for MSI/MSI-X |
| [ 2.916078] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready |
| [ 4.662367] tg3 0000:02:00.0 eth0: Link is up at 100 Mbps, full duplex |
| [ 4.665600] tg3 0000:02:00.0 eth0: Flow control is on for TX and on for RX |
| [ 4.665600] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready |
| [ 5.357271] systemd[1]: systemd 215 running in system mode. (+PAM +AUDIT +SELINUX +IMA +SYSVINIT +LIBCRYPTSETUP +GCRYPT +ACL +XZ -SECCOMP -APPARMOR) |
| [ 5.370771] systemd[1]: Detected architecture 'x86-64'. |
| [ 5.590983] systemd[1]: Inserted module 'autofs4' |
| [ 5.596612] systemd[1]: Set hostname to <cb-test-tgt>. |
| [ 5.678910] random: nonblocking pool is initialized |
| [ 5.820817] systemd[1]: Cannot add dependency job for unit dbus.socket, ignoring: Unit dbus.socket failed to load: No such file or directory. |
| [ 5.833565] systemd[1]: Cannot add dependency job for unit display-manager.service, ignoring: Unit display-manager.service failed to load: No such file or directory. |
| [ 5.848818] systemd[1]: Starting Forward Password Requests to Wall Directory Watch. |
| [ 5.856539] systemd[1]: Started Forward Password Requests to Wall Directory Watch. |
| [ 5.864113] systemd[1]: Expecting device dev-ttyS0.device... |
| [ 5.880139] systemd[1]: Starting Remote File Systems (Pre). |
| [ 5.896079] systemd[1]: Reached target Remote File Systems (Pre). |
| [ 5.902214] systemd[1]: Starting Arbitrary Executable File Formats File System Automount Point. |
| [ 5.924062] systemd[1]: Set up automount Arbitrary Executable File Formats File System Automount Point. |
| [ 5.933488] systemd[1]: Starting Dispatch Password Requests to Console Directory Watch. |
| [ 5.941565] systemd[1]: Started Dispatch Password Requests to Console Directory Watch. |
| [ 5.949488] systemd[1]: Starting Paths. |
| [ 5.964060] systemd[1]: Reached target Paths. |
| [ 5.968439] systemd[1]: Starting Encrypted Volumes. |
| [ 5.984056] systemd[1]: Reached target Encrypted Volumes. |
| [ 5.989473] systemd[1]: Starting Swap. |
| [ 6.004051] systemd[1]: Reached target Swap. |
| [ 6.008337] systemd[1]: Starting Root Slice. |
| [ 6.020056] systemd[1]: Created slice Root Slice. |
| [ 6.024780] systemd[1]: Starting Delayed Shutdown Socket. |
| [ 6.040052] systemd[1]: Listening on Delayed Shutdown Socket. |
| [ 6.045813] systemd[1]: Starting /dev/initctl Compatibility Named Pipe. |
| [ 6.064055] systemd[1]: Listening on /dev/initctl Compatibility Named Pipe. |
| [ 6.071023] systemd[1]: Starting Journal Socket (/dev/log). |
| [ 6.088059] systemd[1]: Listening on Journal Socket (/dev/log). |
| [ 6.094004] systemd[1]: Starting udev Kernel Socket. |
| [ 6.108051] systemd[1]: Listening on udev Kernel Socket. |
| [ 6.113382] systemd[1]: Starting udev Control Socket. |
| [ 6.128052] systemd[1]: Listening on udev Control Socket. |
| [ 6.133468] systemd[1]: Starting User and Session Slice. |
| [ 6.148045] systemd[1]: Created slice User and Session Slice. |
| [ 6.153807] systemd[1]: Starting Journal Socket. |
| [ 6.168058] systemd[1]: Listening on Journal Socket. |
| [ 6.173069] systemd[1]: Starting System Slice. |
| [ 6.188053] systemd[1]: Created slice System Slice. |
| [ 6.192972] systemd[1]: Starting Increase datagram queue length... |
| [ 6.208673] systemd[1]: Mounting Huge Pages File System... |
| [ 6.224641] systemd[1]: Starting udev Coldplug all Devices... |
| [ 6.471752] systemd[1]: Starting Load Kernel Modules... |
| [ 6.484567] systemd[1]: Mounting POSIX Message Queue File System... |
| [ 6.502621] systemd[1]: Started Set Up Additional Binary Formats. |
| [ 6.508816] systemd[1]: Mounting Debug File System... |
| [ 6.524760] systemd[1]: Starting Create list of required static device nodes for the current kernel... |
| [ 6.548468] systemd[1]: Starting system-getty.slice. |
| [ 6.564061] systemd[1]: Created slice system-getty.slice. |
| [ 6.569476] systemd[1]: Starting system-serial\x2dgetty.slice. |
| [ 6.584092] systemd[1]: Created slice system-serial\x2dgetty.slice. |
| [ 6.590403] systemd[1]: Starting Slices. |
| [ 6.604059] systemd[1]: Reached target Slices. |
| [ 6.608540] systemd[1]: Starting Remount Root and Kernel File Systems... |
| [ 6.632064] systemd[1]: Mounted Debug File System. |
| [ 6.648087] systemd[1]: Mounted POSIX Message Queue File System. |
| [ 6.664060] systemd[1]: Mounted Huge Pages File System. |
| [ 6.680059] systemd[1]: Started Increase datagram queue length. |
| [ 6.696076] systemd[1]: Started Load Kernel Modules. |
| [ 6.716095] systemd[1]: Started Create list of required static device nodes for the current kernel. |
| [ 6.736121] systemd[1]: Started Remount Root and Kernel File Systems. |
| [ 6.752067] systemd[1]: Started udev Coldplug all Devices. |
| [ 6.783225] systemd[1]: Started Various fixups to make systemd work better on Debian. |
| [ 6.791143] systemd[1]: Starting Load/Save Random Seed... |
| [ 6.804788] systemd[1]: Starting Create Static Device Nodes in /dev... |
| [ 6.820774] systemd[1]: Mounted Configuration File System. |
| [ 6.826341] systemd[1]: Starting Apply Kernel Variables... |
| [ 6.840805] systemd[1]: Mounted FUSE Control File System. |
| [ 6.846280] systemd[1]: Starting Syslog Socket. |
| [ 6.860109] systemd[1]: Listening on Syslog Socket. |
| [ 6.865062] systemd[1]: Starting Sockets. |
| [ 6.876132] systemd[1]: Reached target Sockets. |
| [ 6.880732] systemd[1]: Starting Journal Service... |
| [ 6.904083] systemd[1]: Started Journal Service. |
| [ 7.057385] systemd-udevd[154]: starting version 215 |
| [ 7.781729] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input2 |
| [ 7.790138] ACPI: Power Button [PWRB] |
| [ 7.790286] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4 |
| [ 7.800608] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input3 |
| [ 7.808009] ACPI: Power Button [PWRF] |
| [ 7.833540] SCSI subsystem initialized |
| [ 7.896632] i2c i2c-0: nForce2 SMBus adapter at 0x4c80 |
| [ 7.902001] i2c i2c-1: nForce2 SMBus adapter at 0x4cc0 |
| [ 7.904295] systemd-udevd[189]: renamed network interface eth1 to eth6 |
| [ 7.912026] FDC 0 is a post-1991 82077 |
| [ 7.930386] libata version 3.00 loaded. |
| [ 7.937204] sata_nv 0000:00:07.0: version 3.5 |
| [ 7.937392] ACPI: PCI Interrupt Link [LSA0] enabled at IRQ 21 |
| [ 7.943749] scsi0 : sata_nv |
| [ 7.947371] scsi1 : sata_nv |
| [ 7.950293] ata1: SATA max UDMA/133 cmd 0x5050 ctl 0x5070 bmdma 0x5030 irq 21 |
| [ 7.957440] ata2: SATA max UDMA/133 cmd 0x5058 ctl 0x5074 bmdma 0x5038 irq 21 |
| [ 7.964928] EDAC MC: Ver: 3.0.0 |
| [ 7.965613] ACPI: PCI Interrupt Link [LSA1] enabled at IRQ 20 |
| [ 7.966023] scsi2 : sata_nv |
| [ 7.966132] scsi3 : sata_nv |
| [ 7.966176] ata3: SATA max UDMA/133 cmd 0x5060 ctl 0x5078 bmdma 0x5040 irq 20 |
| [ 7.966177] ata4: SATA max UDMA/133 cmd 0x5068 ctl 0x507c bmdma 0x5048 irq 20 |
| [ 7.966204] k8temp 0000:00:18.3: Temperature readouts might be wrong - check erratum #141 |
| [ 7.966264] k8temp 0000:00:19.3: Temperature readouts might be wrong - check erratum #141 |
| [ 8.014087] pata_amd 0000:00:06.0: version 0.4.1 |
| [ 8.014703] scsi4 : pata_amd |
| [ 8.017849] scsi5 : pata_amd |
| [ 8.020828] ata5: PATA max UDMA/133 cmd 0x1f0 ctl 0x3f6 bmdma 0x5020 irq 14 |
| [ 8.027800] ata6: PATA max UDMA/133 cmd 0x170 ctl 0x376 bmdma 0x5028 irq 15 |
| [ 8.038381] input: PC Speaker as /devices/platform/pcspkr/input/input4 |
| [ 8.038767] MCE: In-kernel MCE decoding enabled. |
| [ 8.065485] AMD64 EDAC driver v3.4.0 |
| [ 8.069555] EDAC amd64: DRAM ECC enabled. |
| [ 8.074752] EDAC amd64: K8 revF or later detected (node 0). |
| [ 8.080350] EDAC MC: DCT0 chip selects: |
| [ 8.080351] EDAC amd64: MC: 0: 0MB 1: 0MB |
| [ 8.085057] EDAC amd64: MC: 2: 0MB 3: 0MB |
| [ 8.089766] EDAC amd64: MC: 4: 1024MB 5: 1024MB |
| [ 8.094469] EDAC amd64: MC: 6: 1024MB 7: 1024MB |
| [ 8.099215] EDAC amd64: CS4: Registered DDR2 RAM |
| [ 8.103848] EDAC amd64: CS5: Registered DDR2 RAM |
| [ 8.108464] EDAC amd64: CS6: Registered DDR2 RAM |
| [ 8.113083] EDAC amd64: CS7: Registered DDR2 RAM |
| [ 8.117912] EDAC MC0: Giving out device to module amd64_edac controller K8: DEV 0000:00:18.2 (INTERRUPT) |
| [ 8.127403] EDAC amd64: DRAM ECC disabled. |
| [ 8.131506] EDAC amd64: ECC disabled in the BIOS or no ECC capability, module will not load. |
| Either enable ECC checking or force module loading by setting 'ecc_enable_override'. |
| (Note that use of the override may cause unknown side effects.) |
| [ 8.156207] EDAC PCI0: Giving out device to module amd64_edac controller EDAC PCI controller: DEV 0000:00:18.2 (POLLED) |
| [ 8.180372] kvm: Nested Virtualization enabled |
| [ 8.198954] powernow_k8: fid 0x16 (3000 MHz), vid 0xa |
| [ 8.204382] powernow_k8: fid 0x14 (2800 MHz), vid 0xc |
| [ 8.210461] powernow_k8: fid 0x12 (2600 MHz), vid 0xe |
| [ 8.215517] powernow_k8: fid 0x10 (2400 MHz), vid 0x10 |
| [ 8.220654] powernow_k8: fid 0xe (2200 MHz), vid 0x12 |
| [ 8.225706] powernow_k8: fid 0xc (2000 MHz), vid 0x12 |
| [ 8.230681] powernow_k8: fid 0x2 (1000 MHz), vid 0x12 |
| [ 8.235813] powernow_k8: fid 0x16 (3000 MHz), vid 0xa |
| [ 8.240866] powernow_k8: fid 0x14 (2800 MHz), vid 0xc |
| [ 8.245921] powernow_k8: fid 0x12 (2600 MHz), vid 0xe |
| [ 8.250969] powernow_k8: fid 0x10 (2400 MHz), vid 0x10 |
| [ 8.256108] powernow_k8: fid 0xe (2200 MHz), vid 0x12 |
| [ 8.261166] powernow_k8: fid 0xc (2000 MHz), vid 0x12 |
| [ 8.266213] powernow_k8: fid 0x2 (1000 MHz), vid 0x12 |
| [ 8.272192] ata1: SATA link down (SStatus 0 SControl 300) |
| [ 8.278644] powernow_k8: Found 1 Dual-Core AMD Opteron(tm) Processor 8222 (4 cpu cores) (version 2.20.00) |
| [ 8.284032] ata3: SATA link down (SStatus 0 SControl 300) |
| [ 8.588037] ata2: SATA link down (SStatus 0 SControl 300) |
| [ 8.683896] Key type dns_resolver registered |
| [ 8.763374] NFS: Registering the id_resolver key type |
| [ 8.768502] Key type id_resolver registered |
| [ 8.772695] Key type id_legacy registered |
| [ 8.904035] ata4: SATA link down (SStatus 0 SControl 300) |
| [ 9.090524] Installing knfsd (copyright (C) 1996 okir@monad.swb.de). |
| [ 9.097437] systemd-journald[152]: Received request to flush runtime journal from PID 1 |
| [ 39.786539] *****RAPTOR ENGINEERING AUTOMATED TEST BOOT SUCCESS***** |