| [ 0.000000] Initializing cgroup subsys cpuset |
| [ 0.000000] Initializing cgroup subsys cpu |
| [ 0.000000] Initializing cgroup subsys cpuacct |
| [ 0.000000] Linux version 3.16.0-4-amd64 (debian-kernel@lists.debian.org) (gcc version 4.8.4 (Debian 4.8.4-1) ) #1 SMP Debian 3.16.7-ckt7-1 (2015-03-01) |
| [ 0.000000] Command line: root=/dev/nfs initrd=initrd-cb-test-tgt rootfstype=nfs nfsroot=10.100.1.1:/nfsroots/cb-test-tgt-01,v3,hard,nointr,tcp ip=10.100.1.10::10.100.1.1:255.255.255.0:embed-o-matic:eth0:off console=tty0 console=ttyS0,115200n8 rw BOOT_IMAGE=vmlinuz-cb-test-tgt |
| [ 0.000000] e820: BIOS-provided physical RAM map: |
| [ 0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009fbff] usable |
| [ 0.000000] BIOS-e820: [mem 0x000000000009fc00-0x000000000009ffff] reserved |
| [ 0.000000] BIOS-e820: [mem 0x00000000000f0000-0x00000000000fffff] reserved |
| [ 0.000000] BIOS-e820: [mem 0x0000000000100000-0x00000000bff9afff] usable |
| [ 0.000000] BIOS-e820: [mem 0x00000000bff9b000-0x00000000cfffffff] reserved |
| [ 0.000000] BIOS-e820: [mem 0x0000000100000000-0x000000017fffffff] usable |
| [ 0.000000] NX (Execute Disable) protection: active |
| [ 0.000000] SMBIOS 2.7 present. |
| [ 0.000000] DMI: ASUS KFSN4-DRE/KFSN4-DRE, BIOS 4.1-166-g9c1b33e-dirty 07/30/2015 |
| [ 0.000000] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved |
| [ 0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable |
| [ 0.000000] AGP: No AGP bridge found |
| [ 0.000000] e820: last_pfn = 0x180000 max_arch_pfn = 0x400000000 |
| [ 0.000000] MTRR default type: uncachable |
| [ 0.000000] MTRR fixed ranges enabled: |
| [ 0.000000] 00000-9FFFF write-back |
| [ 0.000000] A0000-BFFFF uncachable |
| [ 0.000000] C0000-FFFFF write-back |
| [ 0.000000] MTRR variable ranges enabled: |
| [ 0.000000] 0 base 000000000000 mask FFFF80000000 write-back |
| [ 0.000000] 1 base 000080000000 mask FFFFC0000000 write-back |
| [ 0.000000] 2 base 0000F8000000 mask FFFFFC000000 write-combining |
| [ 0.000000] 3 disabled |
| [ 0.000000] 4 disabled |
| [ 0.000000] 5 disabled |
| [ 0.000000] 6 disabled |
| [ 0.000000] 7 disabled |
| [ 0.000000] TOM2: 0000000180000000 aka 6144M |
| [ 0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106 |
| [ 0.000000] e820: last_pfn = 0xbff9b max_arch_pfn = 0x400000000 |
| [ 0.000000] found SMP MP-table at [mem 0x000f1cf0-0x000f1cff] mapped at [ffff8800000f1cf0] |
| [ 0.000000] Base memory trampoline at [ffff880000099000] 99000 size 24576 |
| [ 0.000000] Using GB pages for direct mapping |
| [ 0.000000] init_memory_mapping: [mem 0x00000000-0x000fffff] |
| [ 0.000000] [mem 0x00000000-0x000fffff] page 4k |
| [ 0.000000] BRK [0x01af3000, 0x01af3fff] PGTABLE |
| [ 0.000000] BRK [0x01af4000, 0x01af4fff] PGTABLE |
| [ 0.000000] BRK [0x01af5000, 0x01af5fff] PGTABLE |
| [ 0.000000] init_memory_mapping: [mem 0x17fe00000-0x17fffffff] |
| [ 0.000000] [mem 0x17fe00000-0x17fffffff] page 1G |
| [ 0.000000] init_memory_mapping: [mem 0x17c000000-0x17fdfffff] |
| [ 0.000000] [mem 0x17c000000-0x17fdfffff] page 1G |
| [ 0.000000] init_memory_mapping: [mem 0x100000000-0x17bffffff] |
| [ 0.000000] [mem 0x100000000-0x17bffffff] page 1G |
| [ 0.000000] init_memory_mapping: [mem 0x00100000-0xbff9afff] |
| [ 0.000000] [mem 0x00100000-0x001fffff] page 4k |
| [ 0.000000] [mem 0x00200000-0x3fffffff] page 2M |
| [ 0.000000] [mem 0x40000000-0x7fffffff] page 1G |
| [ 0.000000] [mem 0x80000000-0xbfdfffff] page 2M |
| [ 0.000000] [mem 0xbfe00000-0xbff9afff] page 4k |
| [ 0.000000] RAMDISK: [mem 0x7f775000-0x7fffefff] |
| [ 0.000000] ACPI: Early table checksum verification disabled |
| [ 0.000000] ACPI: RSDP 0x00000000000F1EC0 000024 (v02 CORE ) |
| [ 0.000000] ACPI: XSDT 0x00000000BFFB40E0 00006C (v01 CORE COREBOOT 00000000 CORE 00000000) |
| [ 0.000000] ACPI: FACP 0x00000000BFFB68A0 000074 (v01 CORE COREBOOT 00000000 CORE 00000000) |
| [ 0.000000] ACPI: DSDT 0x00000000BFFB4250 002644 (v02 ASUS COREBOOT 00000001 INTL 20150204) |
| [ 0.000000] ACPI: FACS 0x00000000BFFB4210 000040 |
| [ 0.000000] ACPI: SSDT 0x00000000BFFB69A0 000E57 (v02 CORE COREBOOT 0000002A CORE 0000002A) |
| [ 0.000000] ACPI: TCPA 0x00000000BFFB7800 000032 (v02 CORE COREBOOT 00000000 CORE 00000000) |
| [ 0.000000] ACPI: APIC 0x00000000BFFB7840 0000C6 (v01 CORE COREBOOT 00000000 CORE 00000000) |
| [ 0.000000] ACPI: SRAT 0x00000000BFFB7910 000178 (v01 CORE COREBOOT 00000000 CORE 00000000) |
| [ 0.000000] ACPI: SLIT 0x00000000BFFB7A88 000030 (v01 CORE COREBOOT 00000000 CORE 00000000) |
| [ 0.000000] ACPI: HPET 0x00000000BFFB7AC0 000038 (v01 CORE COREBOOT 00000000 CORE 00000000) |
| [ 0.000000] ACPI: SRAT 0x00000000BFFB7B00 000178 (v01 CORE COREBOOT 00000000 CORE 00000000) |
| [ 0.000000] ACPI: SLIT 0x00000000BFFB7C78 000030 (v01 CORE COREBOOT 00000000 CORE 00000000) |
| [ 0.000000] ACPI: Local APIC address 0xfee00000 |
| [ 0.000000] SRAT: PXM 0 -> APIC 0x00 -> Node 0 |
| [ 0.000000] SRAT: PXM 0 -> APIC 0x01 -> Node 0 |
| [ 0.000000] SRAT: PXM 0 -> APIC 0x02 -> Node 0 |
| [ 0.000000] SRAT: PXM 0 -> APIC 0x03 -> Node 0 |
| [ 0.000000] SRAT: PXM 1 -> APIC 0x04 -> Node 1 |
| [ 0.000000] SRAT: PXM 1 -> APIC 0x05 -> Node 1 |
| [ 0.000000] SRAT: PXM 1 -> APIC 0x06 -> Node 1 |
| [ 0.000000] SRAT: PXM 1 -> APIC 0x07 -> Node 1 |
| [ 0.000000] SRAT: Node 0 PXM 0 [mem 0x00000000-0x0009ffff] |
| [ 0.000000] SRAT: Node 2 PXM 7 [mem 0x00100000-0xbfffffff] |
| [ 0.000000] SRAT: Node 0 PXM 0 [mem 0x00100000-0xbfffffff] |
| [ 0.000000] SRAT: Node 0 PXM 0 [mem 0x100000000-0x13fffffff] |
| [ 0.000000] SRAT: Node 1 PXM 1 [mem 0x140000000-0x17fffffff] |
| [ 0.000000] NUMA: Initialized distance table, cnt=3 |
| [ 0.000000] NUMA: node 2 [mem 0x00100000-0xbfffffff] overlaps with node 0 [mem 0x00100000-0xbfffffff] |
| [ 0.000000] Scanning NUMA topology in Northbridge 24 |
| [ 0.000000] Number of physical nodes 2 |
| [ 0.000000] Node 0 MemBase 0000000000000000 Limit 0000000140000000 |
| [ 0.000000] Node 1 MemBase 0000000140000000 Limit 0000000180000000 |
| [ 0.000000] Initmem setup node 0 [mem 0x00000000-0x13fffffff] |
| [ 0.000000] NODE_DATA [mem 0x13fffb000-0x13fffffff] |
| [ 0.000000] Initmem setup node 1 [mem 0x140000000-0x17fffffff] |
| [ 0.000000] NODE_DATA [mem 0x17fff9000-0x17fffdfff] |
| [ 0.000000] [ffffea0000000000-ffffea00045fffff] PMD -> [ffff88013be00000-ffff88013f5fffff] on node 0 |
| [ 0.000000] [ffffea0004600000-ffffea00053fffff] PMD -> [ffff88017e600000-ffff88017f3fffff] on node 1 |
| [ 0.000000] Zone ranges: |
| [ 0.000000] DMA [mem 0x00001000-0x00ffffff] |
| [ 0.000000] DMA32 [mem 0x01000000-0xffffffff] |
| [ 0.000000] Normal [mem 0x100000000-0x17fffffff] |
| [ 0.000000] Movable zone start for each node |
| [ 0.000000] Early memory node ranges |
| [ 0.000000] node 0: [mem 0x00001000-0x0009efff] |
| [ 0.000000] node 0: [mem 0x00100000-0xbff9afff] |
| [ 0.000000] node 0: [mem 0x100000000-0x13fffffff] |
| [ 0.000000] node 1: [mem 0x140000000-0x17fffffff] |
| [ 0.000000] On node 0 totalpages: 1048377 |
| [ 0.000000] DMA zone: 56 pages used for memmap |
| [ 0.000000] DMA zone: 21 pages reserved |
| [ 0.000000] DMA zone: 3998 pages, LIFO batch:0 |
| [ 0.000000] DMA32 zone: 10695 pages used for memmap |
| [ 0.000000] DMA32 zone: 782235 pages, LIFO batch:31 |
| [ 0.000000] Normal zone: 3584 pages used for memmap |
| [ 0.000000] Normal zone: 262144 pages, LIFO batch:31 |
| [ 0.000000] On node 1 totalpages: 262144 |
| [ 0.000000] Normal zone: 3584 pages used for memmap |
| [ 0.000000] Normal zone: 262144 pages, LIFO batch:31 |
| [ 0.000000] ACPI: PM-Timer IO Port: 0x2008 |
| [ 0.000000] ACPI: Local APIC address 0xfee00000 |
| [ 0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled) |
| [ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled) |
| [ 0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x02] enabled) |
| [ 0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x03] enabled) |
| [ 0.000000] ACPI: LAPIC (acpi_id[0x04] lapic_id[0x04] enabled) |
| [ 0.000000] ACPI: LAPIC (acpi_id[0x05] lapic_id[0x05] enabled) |
| [ 0.000000] ACPI: LAPIC (acpi_id[0x06] lapic_id[0x06] enabled) |
| [ 0.000000] ACPI: LAPIC (acpi_id[0x07] lapic_id[0x07] enabled) |
| [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1]) |
| [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1]) |
| [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x02] high edge lint[0x1]) |
| [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x03] high edge lint[0x1]) |
| [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x04] high edge lint[0x1]) |
| [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x05] high edge lint[0x1]) |
| [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x06] high edge lint[0x1]) |
| [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x07] high edge lint[0x1]) |
| [ 0.000000] ACPI: IOAPIC (id[0x18] address[0xfec00000] gsi_base[0]) |
| [ 0.000000] IOAPIC[0]: apic_id 24, version 17, address 0xfec00000, GSI 0-23 |
| [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level) |
| [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 14 global_irq 14 high edge) |
| [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 15 global_irq 15 high edge) |
| [ 0.000000] ACPI: IRQ9 used by override. |
| [ 0.000000] ACPI: IRQ14 used by override. |
| [ 0.000000] ACPI: IRQ15 used by override. |
| [ 0.000000] Using ACPI (MADT) for SMP configuration information |
| [ 0.000000] ACPI: HPET id: 0x10de8201 base: 0xfed00000 |
| [ 0.000000] smpboot: Allowing 8 CPUs, 0 hotplug CPUs |
| [ 0.000000] nr_irqs_gsi: 40 |
| [ 0.000000] PM: Registered nosave memory: [mem 0x0009f000-0x0009ffff] |
| [ 0.000000] PM: Registered nosave memory: [mem 0x000a0000-0x000effff] |
| [ 0.000000] PM: Registered nosave memory: [mem 0x000f0000-0x000fffff] |
| [ 0.000000] PM: Registered nosave memory: [mem 0xbff9b000-0xcfffffff] |
| [ 0.000000] PM: Registered nosave memory: [mem 0xd0000000-0xffffffff] |
| [ 0.000000] e820: [mem 0xd0000000-0xffffffff] available for PCI devices |
| [ 0.000000] Booting paravirtualized kernel on bare hardware |
| [ 0.000000] setup_percpu: NR_CPUS:512 nr_cpumask_bits:512 nr_cpu_ids:8 nr_node_ids:2 |
| [ 0.000000] PERCPU: Embedded 27 pages/cpu @ffff88013fc00000 s80896 r8192 d21504 u524288 |
| [ 0.000000] pcpu-alloc: s80896 r8192 d21504 u524288 alloc=1*2097152 |
| [ 0.000000] pcpu-alloc: [0] 0 1 2 3 [1] 4 5 6 7 |
| [ 0.000000] Built 2 zonelists in Node order, mobility grouping on. Total pages: 1292581 |
| [ 0.000000] Policy zone: Normal |
| [ 0.000000] Kernel command line: root=/dev/nfs initrd=initrd-cb-test-tgt rootfstype=nfs nfsroot=10.100.1.1:/nfsroots/cb-test-tgt-01,v3,hard,nointr,tcp ip=10.100.1.10::10.100.1.1:255.255.255.0:embed-o-matic:eth0:off console=tty0 console=ttyS0,115200n8 rw BOOT_IMAGE=vmlinuz-cb-test-tgt |
| [ 0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes) |
| [ 0.000000] AGP: Checking aperture... |
| [ 0.000000] AGP: No AGP bridge found |
| [ 0.000000] AGP: Node 0: aperture [bus addr 0xf5fa000000-0xf5fbffffff] (32MB) |
| [ 0.000000] Aperture beyond 4GB. Ignoring. |
| [ 0.000000] AGP: Your BIOS doesn't leave a aperture memory hole |
| [ 0.000000] AGP: Please enable the IOMMU option in the BIOS setup |
| [ 0.000000] AGP: This costs you 64MB of RAM |
| [ 0.000000] AGP: Mapping aperture over RAM [mem 0xb4000000-0xb7ffffff] (65536KB) |
| [ 0.000000] PM: Registered nosave memory: [mem 0xb4000000-0xb7ffffff] |
| [ 0.000000] Memory: 5017492K/5242084K available (5203K kernel code, 943K rwdata, 1832K rodata, 1204K init, 840K bss, 224592K reserved) |
| [ 0.000000] Hierarchical RCU implementation. |
| [ 0.000000] RCU dyntick-idle grace-period acceleration is enabled. |
| [ 0.000000] RCU restricting CPUs from NR_CPUS=512 to nr_cpu_ids=8. |
| [ 0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=8 |
| [ 0.000000] NR_IRQS:33024 nr_irqs:744 16 |
| [ 0.000000] spurious 8259A interrupt: IRQ7. |
| [ 0.000000] Console: colour VGA+ 80x25 |
| [ 0.000000] console [tty0] enabled |
| [ 0.000000] console [ttyS0] enabled |
| [ 0.000000] mempolicy: Disabling automatic NUMA balancing. Configure with numa_balancing= or the kernel.numa_balancing sysctl |
| [ 0.000000] hpet clockevent registered |
| [ 0.000000] tsc: Fast TSC calibration using PIT |
| [ 0.000000] tsc: Detected 1909.840 MHz processor |
| [ 0.000158] Calibrating delay loop (skipped), value calculated using timer frequency.. 3819.68 BogoMIPS (lpj=7639360) |
| [ 0.010961] pid_max: default: 32768 minimum: 301 |
| [ 0.015684] ACPI: Core revision 20140424 |
| [ 0.022109] ACPI: All ACPI Tables successfully acquired |
| [ 0.027609] Security Framework initialized |
| [ 0.031788] AppArmor: AppArmor disabled by boot time parameter |
| [ 0.037697] Yama: disabled by default; enable with sysctl kernel.yama.* |
| [ 0.045518] Dentry cache hash table entries: 1048576 (order: 11, 8388608 bytes) |
| [ 0.058813] Inode-cache hash table entries: 524288 (order: 10, 4194304 bytes) |
| [ 0.068683] Mount-cache hash table entries: 16384 (order: 5, 131072 bytes) |
| [ 0.075704] Mountpoint-cache hash table entries: 16384 (order: 5, 131072 bytes) |
| [ 0.083666] Initializing cgroup subsys memory |
| [ 0.088132] Initializing cgroup subsys devices |
| [ 0.092673] Initializing cgroup subsys freezer |
| [ 0.097199] Initializing cgroup subsys net_cls |
| [ 0.101734] Initializing cgroup subsys blkio |
| [ 0.106100] Initializing cgroup subsys perf_event |
| [ 0.110895] Initializing cgroup subsys net_prio |
| [ 0.115552] tseg: 0000000000 |
| [ 0.115566] CPU: Physical Processor ID: 0 |
| [ 0.119698] CPU: Processor Core ID: 0 |
| [ 0.124507] mce: CPU supports 6 MCE banks |
| [ 0.128645] LVT offset 0 assigned for vector 0xf9 |
| [ 0.133434] Last level iTLB entries: 4KB 512, 2MB 16, 4MB 8 |
| Last level dTLB entries: 4KB 512, 2MB 128, 4MB 64, 1GB 0 |
| tlb_flushall_shift: 6 |
| [ 0.148914] Freeing SMP alternatives memory: 20K (ffffffff81a1a000 - ffffffff81a1f000) |
| [ 0.158049] ftrace: allocating 21601 entries in 85 pages |
| [ 0.173501] ..TIMER: vector=0x30 apic1=0 pin1=0 apic2=0 pin2=0 |
| [ 0.219144] smpboot: CPU0: Quad-Core AMD Opteron(tm) Processor 8347 (fam: 10, model: 02, stepping: 01) |
| [ 0.336309] Performance Events: AMD PMU driver. |
| [ 0.341021] ... version: 0 |
| [ 0.345117] ... bit width: 48 |
| [ 0.349305] ... generic registers: 4 |
| [ 0.353403] ... value mask: 0000ffffffffffff |
| [ 0.358802] ... max period: 00007fffffffffff |
| [ 0.364189] ... fixed-purpose events: 0 |
| [ 0.368293] ... event mask: 000000000000000f |
| [ 0.376336] NMI watchdog: enabled on all CPUs, permanently consumes one hw-PMU counter. |
| [ 0.384662] x86: Booting SMP configuration: |
| [ 0.388928] .... node #0, CPUs: #1 #2 #3 |
| [ 0.433511] .... node #1, CPUs: #4 #5 #6 #7 |
| [ 0.585037] x86: Booted up 2 nodes, 8 CPUs |
| [ 0.589466] smpboot: Total of 8 processors activated (30557.93 BogoMIPS) |
| [ 0.602060] devtmpfs: initialized |
| [ 0.614075] pinctrl core: initialized pinctrl subsystem |
| [ 0.619548] NET: Registered protocol family 16 |
| [ 0.624289] cpuidle: using governor ladder |
| [ 0.628469] cpuidle: using governor menu |
| [ 0.632475] node 0 link 1: io port [1000, 3fff] |
| [ 0.632478] TOM: 00000000c0000000 aka 3072M |
| [ 0.636742] Fam 10h mmconf [mem 0xc0000000-0xcfffffff] |
| [ 0.636746] node 0 link 1: mmio [fc000000, fc3fffff] |
| [ 0.636749] node 0 link 1: mmio [f8000000, fbffffff] |
| [ 0.636752] TOM2: 0000000180000000 aka 6144M |
| [ 0.641099] bus: [bus 00-05] on node 0 link 1 |
| [ 0.641101] bus: 00 [io 0x0000-0xffff] |
| [ 0.641103] bus: 00 [mem 0xd0000000-0xffffffff] |
| [ 0.641104] bus: 00 [mem 0x180000000-0xfcffffffff] |
| [ 0.641210] ACPI: bus type PCI registered |
| [ 0.645293] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5 |
| [ 0.651965] PCI: Using configuration type 1 for base access |
| [ 0.657605] PCI: Using configuration type 1 for extended access |
| [ 0.664223] mtrr: your CPUs had inconsistent variable MTRR settings |
| [ 0.670582] mtrr: probably your BIOS does not setup all CPUs. |
| [ 0.676405] mtrr: corrected configuration. |
| [ 0.693205] ACPI: Added _OSI(Module Device) |
| [ 0.697508] ACPI: Added _OSI(Processor Device) |
| [ 0.702029] ACPI: Added _OSI(3.0 _SCP Extensions) |
| [ 0.706806] ACPI: Added _OSI(Processor Aggregator Device) |
| [ 0.715874] ACPI: Interpreter enabled |
| [ 0.719627] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S2_] (20140424/hwxface-580) |
| [ 0.729071] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S3_] (20140424/hwxface-580) |
| [ 0.738508] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S4_] (20140424/hwxface-580) |
| [ 0.747954] ACPI: (supports S0 S1 S5) |
| [ 0.751709] ACPI: Using IOAPIC for interrupt routing |
| [ 0.756791] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug |
| [ 0.784741] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-05]) |
| [ 0.791002] acpi PNP0A03:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI] |
| [ 0.799326] acpi PNP0A03:00: _OSC: OS now controls [PCIeHotplug PME AER PCIeCapability] |
| [ 0.838609] acpi PNP0A03:00: host bridge window expanded to [io 0x0000-0x0cf7]; [io 0x03b0-0x03df] ignored |
| [ 0.848758] PCI host bridge to bus 0000:00 |
| [ 0.852953] pci_bus 0000:00: root bus resource [bus 00-05] |
| [ 0.858531] pci_bus 0000:00: root bus resource [io 0x0d00-0x3fff] |
| [ 0.864799] pci_bus 0000:00: root bus resource [mem 0xf8000000-0xfbffffff] |
| [ 0.871762] pci_bus 0000:00: root bus resource [mem 0xfc000000-0xfc3fffff] |
| [ 0.878723] pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7] |
| [ 0.884987] pci 0000:00:00.0: [10de:005e] type 00 class 0x058000 |
| [ 0.885182] pci 0000:00:01.0: [10de:0051] type 00 class 0x060100 |
| [ 0.885190] pci 0000:00:01.0: reg 0x10: [io 0x2c00-0x2c7f] |
| [ 0.885323] pci 0000:00:01.1: [10de:0052] type 00 class 0x0c0500 |
| [ 0.885331] pci 0000:00:01.1: reg 0x10: [io 0x3000-0x301f] |
| [ 0.885355] pci 0000:00:01.1: reg 0x20: [io 0x2c80-0x2cbf] |
| [ 0.885359] pci 0000:00:01.1: reg 0x24: [io 0x2cc0-0x2cff] |
| [ 0.885415] pci 0000:00:01.1: PME# supported from D3hot D3cold |
| [ 0.885520] pci 0000:00:02.0: [10de:005a] type 00 class 0x0c0310 |
| [ 0.885534] pci 0000:00:02.0: reg 0x10: [mem 0xfc300000-0xfc300fff] |
| [ 0.885560] pci 0000:00:02.0: supports D1 D2 |
| [ 0.885572] pci 0000:00:02.0: PME# supported from D0 D1 D2 D3hot D3cold |
| [ 0.885638] pci 0000:00:02.0: System wakeup disabled by ACPI |
| [ 0.891438] pci 0000:00:02.1: [10de:005b] type 00 class 0x0c0320 |
| [ 0.891453] pci 0000:00:02.1: reg 0x10: [mem 0xfc303000-0xfc3030ff] |
| [ 0.891494] pci 0000:00:02.1: supports D1 D2 |
| [ 0.891496] pci 0000:00:02.1: PME# supported from D0 D1 D2 D3hot D3cold |
| [ 0.891544] pci 0000:00:02.1: System wakeup disabled by ACPI |
| [ 0.897364] pci 0000:00:06.0: [10de:0053] type 00 class 0x01018a |
| [ 0.897408] pci 0000:00:06.0: reg 0x20: [io 0x3020-0x302f] |
| [ 0.897419] pci 0000:00:06.0: legacy IDE quirk: reg 0x10: [io 0x01f0-0x01f7] |
| [ 0.904651] pci 0000:00:06.0: legacy IDE quirk: reg 0x14: [io 0x03f6] |
| [ 0.911264] pci 0000:00:06.0: legacy IDE quirk: reg 0x18: [io 0x0170-0x0177] |
| [ 0.918496] pci 0000:00:06.0: legacy IDE quirk: reg 0x1c: [io 0x0376] |
| [ 0.925207] pci 0000:00:07.0: [10de:0054] type 00 class 0x010185 |
| [ 0.925218] pci 0000:00:07.0: reg 0x10: [io 0x3050-0x3057] |
| [ 0.925222] pci 0000:00:07.0: reg 0x14: [io 0x3070-0x3073] |
| [ 0.925227] pci 0000:00:07.0: reg 0x18: [io 0x3058-0x305f] |
| [ 0.925231] pci 0000:00:07.0: reg 0x1c: [io 0x3074-0x3077] |
| [ 0.925236] pci 0000:00:07.0: reg 0x20: [io 0x3030-0x303f] |
| [ 0.925241] pci 0000:00:07.0: reg 0x24: [mem 0xfc301000-0xfc301fff] |
| [ 0.925386] pci 0000:00:08.0: [10de:0055] type 00 class 0x010185 |
| [ 0.925398] pci 0000:00:08.0: reg 0x10: [io 0x3060-0x3067] |
| [ 0.925408] pci 0000:00:08.0: reg 0x14: [io 0x3078-0x307b] |
| [ 0.925413] pci 0000:00:08.0: reg 0x18: [io 0x3068-0x306f] |
| [ 0.925426] pci 0000:00:08.0: reg 0x1c: [io 0x307c-0x307f] |
| [ 0.925441] pci 0000:00:08.0: reg 0x20: [io 0x3040-0x304f] |
| [ 0.925456] pci 0000:00:08.0: reg 0x24: [mem 0xfc302000-0xfc302fff] |
| [ 0.925606] pci 0000:00:09.0: [10de:005c] type 01 class 0x060400 |
| [ 0.925691] pci 0000:00:09.0: System wakeup disabled by ACPI |
| [ 0.931482] pci 0000:00:0b.0: [10de:005d] type 01 class 0x060400 |
| [ 0.931532] pci 0000:00:0b.0: PME# supported from D0 D1 D2 D3hot D3cold |
| [ 0.931586] pci 0000:00:0b.0: System wakeup disabled by ACPI |
| [ 0.937393] pci 0000:00:0c.0: [10de:005d] type 01 class 0x060400 |
| [ 0.937446] pci 0000:00:0c.0: PME# supported from D0 D1 D2 D3hot D3cold |
| [ 0.937523] pci 0000:00:0c.0: System wakeup disabled by ACPI |
| [ 0.943341] pci 0000:00:0d.0: [10de:005d] type 01 class 0x060400 |
| [ 0.943372] pci 0000:00:0d.0: PME# supported from D0 D1 D2 D3hot D3cold |
| [ 0.943469] pci 0000:00:0d.0: System wakeup disabled by ACPI |
| [ 0.949272] pci 0000:00:0e.0: [10de:005d] type 01 class 0x060400 |
| [ 0.949316] pci 0000:00:0e.0: PME# supported from D0 D1 D2 D3hot D3cold |
| [ 0.949378] pci 0000:00:0e.0: System wakeup disabled by ACPI |
| [ 0.955206] pci 0000:00:18.0: [1022:1200] type 00 class 0x060000 |
| [ 0.955371] pci 0000:00:18.1: [1022:1201] type 00 class 0x060000 |
| [ 0.955525] pci 0000:00:18.2: [1022:1202] type 00 class 0x060000 |
| [ 0.955649] pci 0000:00:18.3: [1022:1203] type 00 class 0x060000 |
| [ 0.955825] pci 0000:00:18.4: [1022:1204] type 00 class 0x060000 |
| [ 0.955948] pci 0000:00:19.0: [1022:1200] type 00 class 0x060000 |
| [ 0.956102] pci 0000:00:19.1: [1022:1201] type 00 class 0x060000 |
| [ 0.956212] pci 0000:00:19.2: [1022:1202] type 00 class 0x060000 |
| [ 0.956363] pci 0000:00:19.3: [1022:1203] type 00 class 0x060000 |
| [ 0.956509] pci 0000:00:19.4: [1022:1204] type 00 class 0x060000 |
| [ 0.956738] pci 0000:01:04.0: [18ca:0020] type 00 class 0x030000 |
| [ 0.956758] pci 0000:01:04.0: reg 0x10: [mem 0xf8000000-0xfbffffff pref] |
| [ 0.956775] pci 0000:01:04.0: reg 0x14: [mem 0xfc000000-0xfc03ffff] |
| [ 0.956790] pci 0000:01:04.0: reg 0x18: [io 0x1000-0x107f] |
| [ 0.956825] pci 0000:01:04.0: supports D1 D2 |
| [ 0.956921] pci 0000:00:09.0: PCI bridge to [bus 01] |
| [ 0.961969] pci 0000:00:09.0: bridge window [io 0x1000-0x1fff] |
| [ 0.961973] pci 0000:00:09.0: bridge window [mem 0xfc000000-0xfc0fffff] |
| [ 0.961976] pci 0000:00:09.0: bridge window [mem 0xf8000000-0xfbffffff pref] |
| [ 0.962075] pci 0000:02:00.0: [14e4:1659] type 00 class 0x020000 |
| [ 0.962104] pci 0000:02:00.0: reg 0x10: [mem 0xfc100000-0xfc10ffff 64bit] |
| [ 0.962141] pci 0000:02:00.0: reg 0x30: [mem 0x68400000-0x6840ffff pref] |
| [ 0.962225] pci 0000:02:00.0: PME# supported from D3hot D3cold |
| [ 0.962312] pci 0000:02:00.0: disabling ASPM on pre-1.1 PCIe device. You can enable it with 'pcie_aspm=force' |
| [ 0.972444] pci 0000:00:0b.0: PCI bridge to [bus 02] |
| [ 0.977499] pci 0000:00:0b.0: bridge window [mem 0xfc100000-0xfc1fffff] |
| [ 0.977598] pci 0000:03:00.0: [14e4:1659] type 00 class 0x020000 |
| [ 0.977623] pci 0000:03:00.0: reg 0x10: [mem 0xfc200000-0xfc20ffff 64bit] |
| [ 0.977725] pci 0000:03:00.0: PME# supported from D3hot D3cold |
| [ 0.977821] pci 0000:03:00.0: disabling ASPM on pre-1.1 PCIe device. You can enable it with 'pcie_aspm=force' |
| [ 0.987952] pci 0000:00:0c.0: PCI bridge to [bus 03] |
| [ 0.992994] pci 0000:00:0c.0: bridge window [mem 0xfc200000-0xfc2fffff] |
| [ 0.993065] pci 0000:00:0d.0: PCI bridge to [bus 04] |
| [ 0.998193] pci 0000:00:0e.0: PCI bridge to [bus 05] |
| [ 1.003278] pci_bus 0000:00: on NUMA node 0 |
| [ 1.003390] ACPI: PCI Interrupt Link [LNKA] (IRQs *16 17 18 19) |
| [ 1.009814] ACPI: PCI Interrupt Link [LNKB] (IRQs 16 *17 18 19) |
| [ 1.016240] ACPI: PCI Interrupt Link [LNKC] (IRQs 16 17 18 19) *0, disabled. |
| [ 1.023909] ACPI: PCI Interrupt Link [LNKD] (IRQs 16 17 18 19) *0, disabled. |
| [ 1.031569] ACPI: PCI Interrupt Link [LNKE] (IRQs 16 17 18 19) *0, disabled. |
| [ 1.039238] ACPI: PCI Interrupt Link [LLAS] (IRQs 20 21 22 23) *0, disabled. |
| [ 1.046916] ACPI: PCI Interrupt Link [LUOH] (IRQs 20 21 22 *23) |
| [ 1.053326] ACPI: PCI Interrupt Link [LUEH] (IRQs 20 21 *22 23) |
| [ 1.059744] ACPI: PCI Interrupt Link [LAUD] (IRQs 20 21 22 23) *0, disabled. |
| [ 1.067400] ACPI: PCI Interrupt Link [LMOD] (IRQs 20 21 22 23) *0, disabled. |
| [ 1.075080] ACPI: PCI Interrupt Link [LPA0] (IRQs 20 21 22 23) *0, disabled. |
| [ 1.082731] ACPI: PCI Interrupt Link [LSA0] (IRQs 20 *21 22 23) |
| [ 1.089164] ACPI: PCI Interrupt Link [LSA1] (IRQs *20 21 22 23) |
| [ 1.095586] ACPI: PCI Interrupt Link [LEMA] (IRQs 20 21 22 23) *0, disabled. |
| [ 1.103256] ACPI: PCI Interrupt Link [LUB0] (IRQs 20 21 22 23) *0, disabled. |
| [ 1.110905] ACPI: PCI Interrupt Link [LUB2] (IRQs 20 21 22 23) *0, disabled. |
| [ 1.118581] ACPI: PCI Interrupt Link [LKSM] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled. |
| [ 1.127687] ACPI: PCI Interrupt Link [LNIA] (IRQs 16) *0, disabled. |
| [ 1.134404] ACPI: PCI Interrupt Link [LNIB] (IRQs 17) *0, disabled. |
| [ 1.141095] ACPI: PCI Interrupt Link [LNIC] (IRQs 18) *0, disabled. |
| [ 1.147822] ACPI: PCI Interrupt Link [LNND] (IRQs 19) *0, disabled. |
| [ 1.154792] ACPI: Enabled 1 GPEs in block 00 to 1F |
| [ 1.160062] vgaarb: setting as boot device: PCI:0000:01:04.0 |
| [ 1.165848] vgaarb: device added: PCI:0000:01:04.0,decodes=io+mem,owns=io+mem,locks=none |
| [ 1.174038] vgaarb: loaded |
| [ 1.176835] vgaarb: bridge control possible 0000:01:04.0 |
| [ 1.182391] PCI: Using ACPI for IRQ routing |
| [ 1.186663] PCI: pci_cache_line_size set to 64 bytes |
| [ 1.186720] e820: reserve RAM buffer [mem 0x0009fc00-0x0009ffff] |
| [ 1.186724] e820: reserve RAM buffer [mem 0xbff9b000-0xbfffffff] |
| [ 1.187055] HPET: 3 timers in total, 0 timers will be used for per-cpu timer |
| [ 1.194191] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 31 |
| [ 1.199461] hpet0: 3 comparators, 32-bit 25.000000 MHz counter |
| [ 1.208209] Switched to clocksource hpet |
| [ 1.223910] pnp: PnP ACPI init |
| [ 1.227142] ACPI: bus type PNP registered |
| [ 1.231756] pnp 00:00: Plug and Play ACPI device, IDs PNP0303 PNP030b (active) |
| [ 1.231843] pnp 00:01: Plug and Play ACPI device, IDs PNP0f03 PNP0f13 (active) |
| [ 1.231927] pnp 00:02: Plug and Play ACPI device, IDs PNP0501 (active) |
| [ 1.232022] pnp 00:03: Plug and Play ACPI device, IDs PNP0501 (active) |
| [ 1.232060] pnp 00:04: [dma 2] |
| [ 1.232107] pnp 00:04: Plug and Play ACPI device, IDs PNP0700 (active) |
| [ 1.232130] pnp: PnP ACPI: found 5 devices |
| [ 1.236318] ACPI: bus type PNP unregistered |
| [ 1.248365] pci 0000:02:00.0: can't claim BAR 6 [mem 0x68400000-0x6840ffff pref]: no compatible bridge window |
| [ 1.258457] pci 0000:00:09.0: PCI bridge to [bus 01] |
| [ 1.263495] pci 0000:00:09.0: bridge window [io 0x1000-0x1fff] |
| [ 1.269665] pci 0000:00:09.0: bridge window [mem 0xfc000000-0xfc0fffff] |
| [ 1.276539] pci 0000:00:09.0: bridge window [mem 0xf8000000-0xfbffffff pref] |
| [ 1.283873] pci 0000:02:00.0: BAR 6: assigned [mem 0xfc110000-0xfc11ffff pref] |
| [ 1.291224] pci 0000:00:0b.0: PCI bridge to [bus 02] |
| [ 1.296266] pci 0000:00:0b.0: bridge window [mem 0xfc100000-0xfc1fffff] |
| [ 1.303136] pci 0000:00:0c.0: PCI bridge to [bus 03] |
| [ 1.308179] pci 0000:00:0c.0: bridge window [mem 0xfc200000-0xfc2fffff] |
| [ 1.315049] pci 0000:00:0d.0: PCI bridge to [bus 04] |
| [ 1.320113] pci 0000:00:0e.0: PCI bridge to [bus 05] |
| [ 1.325163] pci_bus 0000:00: resource 4 [io 0x0d00-0x3fff] |
| [ 1.325166] pci_bus 0000:00: resource 5 [mem 0xf8000000-0xfbffffff] |
| [ 1.325168] pci_bus 0000:00: resource 6 [mem 0xfc000000-0xfc3fffff] |
| [ 1.325171] pci_bus 0000:00: resource 7 [io 0x0000-0x0cf7] |
| [ 1.325174] pci_bus 0000:01: resource 0 [io 0x1000-0x1fff] |
| [ 1.325177] pci_bus 0000:01: resource 1 [mem 0xfc000000-0xfc0fffff] |
| [ 1.325179] pci_bus 0000:01: resource 2 [mem 0xf8000000-0xfbffffff pref] |
| [ 1.325182] pci_bus 0000:02: resource 1 [mem 0xfc100000-0xfc1fffff] |
| [ 1.325185] pci_bus 0000:03: resource 1 [mem 0xfc200000-0xfc2fffff] |
| [ 1.325314] NET: Registered protocol family 2 |
| [ 1.330262] TCP established hash table entries: 65536 (order: 7, 524288 bytes) |
| [ 1.338082] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes) |
| [ 1.345503] TCP: Hash tables configured (established 65536 bind 65536) |
| [ 1.352193] TCP: reno registered |
| [ 1.355531] UDP hash table entries: 4096 (order: 5, 131072 bytes) |
| [ 1.361804] UDP-Lite hash table entries: 4096 (order: 5, 131072 bytes) |
| [ 1.368665] NET: Registered protocol family 1 |
| [ 1.373511] ACPI: PCI Interrupt Link [LUB0] enabled at IRQ 23 |
| [ 1.379705] ACPI: PCI Interrupt Link [LUB2] enabled at IRQ 22 |
| [ 1.385672] pci 0000:00:00.0: Found enabled HT MSI Mapping |
| [ 1.391274] pci 0000:00:00.0: Found enabled HT MSI Mapping |
| [ 1.396871] pci 0000:00:0b.0: Found disabled HT MSI Mapping |
| [ 1.402527] pci 0000:00:00.0: Found enabled HT MSI Mapping |
| [ 1.408168] pci 0000:00:00.0: Found enabled HT MSI Mapping |
| [ 1.413735] pci 0000:00:0c.0: Found disabled HT MSI Mapping |
| [ 1.419386] pci 0000:00:00.0: Found enabled HT MSI Mapping |
| [ 1.425000] pci 0000:00:00.0: Found enabled HT MSI Mapping |
| [ 1.430583] pci 0000:00:0d.0: Found disabled HT MSI Mapping |
| [ 1.436236] pci 0000:00:00.0: Found enabled HT MSI Mapping |
| [ 1.441853] pci 0000:00:00.0: Found enabled HT MSI Mapping |
| [ 1.447446] pci 0000:00:0e.0: Found disabled HT MSI Mapping |
| [ 1.453106] pci 0000:00:00.0: Found enabled HT MSI Mapping |
| [ 1.458714] pci 0000:01:04.0: Video device with shadowed ROM |
| [ 1.458723] PCI: CLS 64 bytes, default 64 |
| [ 1.458830] Unpacking initramfs... |
| [ 1.691775] Freeing initrd memory: 8744K (ffff88007f775000 - ffff88007ffff000) |
| [ 1.699753] PCI-DMA: Disabling AGP. |
| [ 1.705004] PCI-DMA: aperture base @ b4000000 size 65536 KB |
| [ 1.710682] PCI-DMA: using GART IOMMU. |
| [ 1.714519] PCI-DMA: Reserving 64MB of IOMMU area in the AGP aperture |
| [ 1.726990] platform rtc_cmos: registered platform RTC device (no PNP device found) |
| [ 1.735331] microcode: CPU0: patch_level=0x01000096 |
| [ 1.740328] microcode: CPU1: patch_level=0x01000096 |
| [ 1.745336] microcode: CPU2: patch_level=0x01000096 |
| [ 1.750348] microcode: CPU3: patch_level=0x01000096 |
| [ 1.755357] microcode: CPU4: patch_level=0x01000096 |
| [ 1.760356] microcode: CPU5: patch_level=0x01000096 |
| [ 1.765347] microcode: CPU6: patch_level=0x01000096 |
| [ 1.771443] microcode: CPU7: patch_level=0x01000096 |
| [ 1.776523] microcode: Microcode Update Driver: v2.00 <tigran@aivazian.fsnet.co.uk>, Peter Oruba |
| [ 1.785465] LVT offset 1 assigned for vector 0x400 |
| [ 1.790364] IBS: LVT offset 1 assigned |
| [ 1.794231] perf: AMD IBS detected (0x00000007) |
| [ 1.799462] futex hash table entries: 2048 (order: 5, 131072 bytes) |
| [ 1.805931] audit: initializing netlink subsys (disabled) |
| [ 1.811435] audit: type=2000 audit(1438230965.628:1): initialized |
| [ 1.818404] HugeTLB registered 2 MB page size, pre-allocated 0 pages |
| [ 1.824907] zbud: loaded |
| [ 1.827877] VFS: Disk quotas dquot_6.5.2 |
| [ 1.831931] Dquot-cache hash table entries: 512 (order 0, 4096 bytes) |
| [ 1.838565] msgmni has been set to 9945 |
| [ 1.843007] alg: No test for stdrng (krng) |
| [ 1.847299] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252) |
| [ 1.854947] io scheduler noop registered |
| [ 1.858976] io scheduler deadline registered |
| [ 1.863421] io scheduler cfq registered (default) |
| [ 1.868432] pcieport 0000:00:0b.0: irq 40 for MSI/MSI-X |
| [ 1.868559] pcieport 0000:00:0c.0: irq 41 for MSI/MSI-X |
| [ 1.868688] pcieport 0000:00:0d.0: irq 42 for MSI/MSI-X |
| [ 1.868814] pcieport 0000:00:0e.0: irq 43 for MSI/MSI-X |
| [ 1.868984] aer 0000:00:0b.0:pcie02: service driver aer loaded |
| [ 1.869011] aer 0000:00:0c.0:pcie02: service driver aer loaded |
| [ 1.869037] aer 0000:00:0d.0:pcie02: service driver aer loaded |
| [ 1.869063] aer 0000:00:0e.0:pcie02: service driver aer loaded |
| [ 1.869085] pcieport 0000:00:0b.0: Signaling PME through PCIe PME interrupt |
| [ 1.876186] pci 0000:02:00.0: Signaling PME through PCIe PME interrupt |
| [ 1.882796] pcie_pme 0000:00:0b.0:pcie01: service driver pcie_pme loaded |
| [ 1.882806] pcieport 0000:00:0c.0: Signaling PME through PCIe PME interrupt |
| [ 1.889854] pci 0000:03:00.0: Signaling PME through PCIe PME interrupt |
| [ 1.896465] pcie_pme 0000:00:0c.0:pcie01: service driver pcie_pme loaded |
| [ 1.896474] pcieport 0000:00:0d.0: Signaling PME through PCIe PME interrupt |
| [ 1.903518] pcie_pme 0000:00:0d.0:pcie01: service driver pcie_pme loaded |
| [ 1.903528] pcieport 0000:00:0e.0: Signaling PME through PCIe PME interrupt |
| [ 1.910569] pcie_pme 0000:00:0e.0:pcie01: service driver pcie_pme loaded |
| [ 1.910602] pci_hotplug: PCI Hot Plug PCI Core version: 0.5 |
| [ 1.916303] pciehp: PCI Express Hot Plug Controller Driver version: 0.4 |
| [ 1.923140] GHES: HEST is not enabled! |
| [ 1.927103] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled |
| [ 1.953871] 00:02: ttyS0 at I/O 0x3f8 (irq = 4, base_baud = 115200) is a 16550A |
| [ 1.981643] 00:03: ttyS1 at I/O 0x2f8 (irq = 3, base_baud = 115200) is a 16550A |
| [ 1.989674] Linux agpgart interface v0.103 |
| [ 1.994091] i8042: PNP: PS/2 Controller [PNP0303:KBD,PNP0f03:MOU] at 0x60,0x64 irq 1,12 |
| [ 2.004625] serio: i8042 KBD port at 0x60,0x64 irq 1 |
| [ 2.009744] serio: i8042 AUX port at 0x60,0x64 irq 12 |
| [ 2.015070] mousedev: PS/2 mouse device common for all mice |
| [ 2.020877] rtc_cmos rtc_cmos: RTC can wake from S4 |
| [ 2.026093] rtc_cmos rtc_cmos: rtc core: registered rtc_cmos as rtc0 |
| [ 2.032614] rtc_cmos rtc_cmos: alarms up to one year, y3k, 114 bytes nvram, hpet irqs |
| [ 2.040597] ledtrig-cpu: registered to indicate activity on CPUs |
| [ 2.046860] AMD IOMMUv2 driver by Joerg Roedel <joerg.roedel@amd.com> |
| [ 2.053402] AMD IOMMUv2 functionality not available on this system |
| [ 2.059814] TCP: cubic registered |
| [ 2.063350] NET: Registered protocol family 10 |
| [ 2.068325] mip6: Mobile IPv6 |
| [ 2.071386] NET: Registered protocol family 17 |
| [ 2.076001] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input0 |
| [ 2.084777] mpls_gso: MPLS GSO support |
| [ 2.089521] registered taskstats version 1 |
| [ 2.094509] rtc_cmos rtc_cmos: setting system clock to 2015-07-30 04:36:07 UTC (1438230967) |
| [ 2.103089] PM: Hibernation image not present or could not be loaded. |
| [ 2.104931] Freeing unused kernel memory: 1204K (ffffffff818ed000 - ffffffff81a1a000) |
| [ 2.112926] Write protecting the kernel read-only data: 8192k |
| [ 2.122258] Freeing unused kernel memory: 928K (ffff880001518000 - ffff880001600000) |
| [ 2.131005] Freeing unused kernel memory: 216K (ffff8800017ca000 - ffff880001800000) |
| [ 2.154987] systemd-udevd[99]: starting version 215 |
| [ 2.160849] random: systemd-udevd urandom read with 3 bits of entropy available |
| [ 2.190370] ACPI: bus type USB registered |
| [ 2.194686] usbcore: registered new interface driver usbfs |
| [ 2.200342] usbcore: registered new interface driver hub |
| [ 2.205952] usbcore: registered new device driver usb |
| [ 2.206014] pps_core: LinuxPPS API ver. 1 registered |
| [ 2.206015] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it> |
| [ 2.226031] PTP clock support registered |
| [ 2.230359] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver |
| [ 2.237386] tg3.c:v3.137 (May 11, 2014) |
| [ 2.241369] tg3 0000:02:00.0: enabling device (0004 -> 0006) |
| [ 2.247311] ehci-pci: EHCI PCI platform driver |
| [ 2.247404] ACPI: PCI Interrupt Link [LNIB] enabled at IRQ 17 |
| [ 2.257960] ehci-pci 0000:00:02.1: EHCI Host Controller |
| [ 2.263374] ehci-pci 0000:00:02.1: new USB bus registered, assigned bus number 1 |
| [ 2.270993] ehci-pci 0000:00:02.1: debug port 1 |
| [ 2.271100] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver |
| [ 2.281968] ehci-pci 0000:00:02.1: cache line size of 64 is not supported |
| [ 2.282005] ehci-pci 0000:00:02.1: irq 22, io mem 0xfc303000 |
| [ 2.295888] ehci-pci 0000:00:02.1: USB 2.0 started, EHCI 1.00 |
| [ 2.301866] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002 |
| [ 2.308737] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 |
| [ 2.316082] usb usb1: Product: EHCI Host Controller |
| [ 2.319406] tg3 0000:02:00.0 eth0: Tigon3 [partno(BCM95721) rev 4201] (PCI Express) MAC address 00:1e:8c:51:61:a2 |
| [ 2.319409] tg3 0000:02:00.0 eth0: attached PHY is 5750 (10/100/1000Base-T Ethernet) (WireSpeed[1], EEE[0]) |
| [ 2.319411] tg3 0000:02:00.0 eth0: RXcsums[1] LinkChgREG[0] MIirq[0] ASF[0] TSOcap[1] |
| [ 2.319413] tg3 0000:02:00.0 eth0: dma_rwctrl[76180000] dma_mask[64-bit] |
| [ 2.319548] tg3 0000:03:00.0: enabling device (0004 -> 0006) |
| [ 2.319702] ACPI: PCI Interrupt Link [LNIA] enabled at IRQ 16 |
| [ 2.367447] usb usb1: Manufacturer: Linux 3.16.0-4-amd64 ehci_hcd |
| [ 2.373626] usb usb1: SerialNumber: 0000:00:02.1 |
| [ 2.378615] hub 1-0:1.0: USB hub found |
| [ 2.382497] hub 1-0:1.0: 10 ports detected |
| [ 2.387682] ohci-pci: OHCI PCI platform driver |
| [ 2.392514] ohci-pci 0000:00:02.0: OHCI PCI host controller |
| [ 2.398228] ohci-pci 0000:00:02.0: new USB bus registered, assigned bus number 2 |
| [ 2.406056] ohci-pci 0000:00:02.0: irq 23, io mem 0xfc300000 |
| [ 2.420273] tg3 0000:03:00.0 eth1: Tigon3 [partno(BCM95721) rev 4201] (PCI Express) MAC address 00:1e:8c:51:63:95 |
| [ 2.430661] tg3 0000:03:00.0 eth1: attached PHY is 5750 (10/100/1000Base-T Ethernet) (WireSpeed[1], EEE[0]) |
| [ 2.440525] tg3 0000:03:00.0 eth1: RXcsums[1] LinkChgREG[0] MIirq[0] ASF[0] TSOcap[1] |
| [ 2.448472] tg3 0000:03:00.0 eth1: dma_rwctrl[76180000] dma_mask[64-bit] |
| [ 2.469868] usb usb2: New USB device found, idVendor=1d6b, idProduct=0001 |
| [ 2.476797] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1 |
| [ 2.484132] usb usb2: Product: OHCI PCI host controller |
| [ 2.489443] usb usb2: Manufacturer: Linux 3.16.0-4-amd64 ohci_hcd |
| [ 2.495622] usb usb2: SerialNumber: 0000:00:02.0 |
| [ 2.500524] hub 2-0:1.0: USB hub found |
| [ 2.504365] hub 2-0:1.0: 10 ports detected |
| [ 2.515467] FS-Cache: Loaded |
| [ 2.523287] RPC: Registered named UNIX socket transport module. |
| [ 2.529772] RPC: Registered udp transport module. |
| [ 2.535852] RPC: Registered tcp transport module. |
| [ 2.541956] RPC: Registered tcp NFSv4.1 backchannel transport module. |
| [ 2.554496] FS-Cache: Netfs 'nfs' registered for caching |
| [ 2.572399] tg3 0000:02:00.0: irq 44 for MSI/MSI-X |
| [ 2.619842] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready |
| [ 2.723708] tsc: Refined TSC clocksource calibration: 1909.786 MHz |
| [ 3.727470] Switched to clocksource tsc |
| [ 4.278239] tg3 0000:02:00.0 eth0: Link is up at 100 Mbps, full duplex |
| [ 4.284930] tg3 0000:02:00.0 eth0: Flow control is on for TX and on for RX |
| [ 4.291895] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready |
| [ 9.541128] systemd[1]: systemd 215 running in system mode. (+PAM +AUDIT +SELINUX +IMA +SYSVINIT +LIBCRYPTSETUP +GCRYPT +ACL +XZ -SECCOMP -APPARMOR) |
| [ 9.555312] systemd[1]: Detected architecture 'x86-64'. |
| [ 11.952798] random: nonblocking pool is initialized |
| [ 12.075098] systemd[1]: Inserted module 'autofs4' |
| [ 12.093902] systemd[1]: Set hostname to <cb-test-tgt>. |
| [ 15.129559] systemd[1]: Cannot add dependency job for unit dbus.socket, ignoring: Unit dbus.socket failed to load: No such file or directory. |
| [ 15.142457] systemd[1]: Cannot add dependency job for unit display-manager.service, ignoring: Unit display-manager.service failed to load: No such file or directory. |
| [ 15.158012] systemd[1]: Expecting device dev-ttyS0.device... |
| [ 15.171542] systemd[1]: Starting Forward Password Requests to Wall Directory Watch. |
| [ 15.179474] systemd[1]: Started Forward Password Requests to Wall Directory Watch. |
| [ 15.187208] systemd[1]: Starting Remote File Systems (Pre). |
| [ 15.203508] systemd[1]: Reached target Remote File Systems (Pre). |
| [ 15.209813] systemd[1]: Starting Encrypted Volumes. |
| [ 15.223411] systemd[1]: Reached target Encrypted Volumes. |
| [ 15.228947] systemd[1]: Starting Dispatch Password Requests to Console Directory Watch. |
| [ 15.237169] systemd[1]: Started Dispatch Password Requests to Console Directory Watch. |
| [ 15.245220] systemd[1]: Starting Paths. |
| [ 15.259417] systemd[1]: Reached target Paths. |
| [ 15.263963] systemd[1]: Starting Arbitrary Executable File Formats File System Automount Point. |
| [ 15.287398] systemd[1]: Set up automount Arbitrary Executable File Formats File System Automount Point. |
| [ 15.296984] systemd[1]: Starting Swap. |
| [ 15.311387] systemd[1]: Reached target Swap. |
| [ 15.315799] systemd[1]: Starting Root Slice. |
| [ 15.327381] systemd[1]: Created slice Root Slice. |
| [ 15.332206] systemd[1]: Starting User and Session Slice. |
| [ 15.347375] systemd[1]: Created slice User and Session Slice. |
| [ 15.353251] systemd[1]: Starting Delayed Shutdown Socket. |
| [ 15.367366] systemd[1]: Listening on Delayed Shutdown Socket. |
| [ 15.373254] systemd[1]: Starting /dev/initctl Compatibility Named Pipe. |
| [ 15.399341] systemd[1]: Listening on /dev/initctl Compatibility Named Pipe. |
| [ 15.406431] systemd[1]: Starting Journal Socket (/dev/log). |
| [ 15.427345] systemd[1]: Listening on Journal Socket (/dev/log). |
| [ 15.433435] systemd[1]: Starting udev Kernel Socket. |
| [ 15.447330] systemd[1]: Listening on udev Kernel Socket. |
| [ 15.453865] systemd[1]: Starting udev Control Socket. |
| [ 15.467319] systemd[1]: Listening on udev Control Socket. |
| [ 15.472855] systemd[1]: Starting Journal Socket. |
| [ 15.487311] systemd[1]: Listening on Journal Socket. |
| [ 15.492410] systemd[1]: Starting System Slice. |
| [ 15.507306] systemd[1]: Created slice System Slice. |
| [ 15.512299] systemd[1]: Starting system-getty.slice. |
| [ 15.527311] systemd[1]: Created slice system-getty.slice. |
| [ 15.532841] systemd[1]: Starting system-serial\x2dgetty.slice. |
| [ 15.547374] systemd[1]: Created slice system-serial\x2dgetty.slice. |
| [ 15.553882] systemd[1]: Starting Increase datagram queue length... |
| [ 15.572743] systemd[1]: Mounting Debug File System... |
| [ 15.588910] systemd[1]: Mounting POSIX Message Queue File System... |
| [ 15.728617] systemd[1]: Starting Load Kernel Modules... |
| [ 16.159929] systemd[1]: Started Set Up Additional Binary Formats. |
| [ 16.171234] systemd[1]: Starting Create list of required static device nodes for the current kernel... |
| [ 16.196674] systemd[1]: Starting udev Coldplug all Devices... |
| [ 16.212659] systemd[1]: Mounting Huge Pages File System... |
| [ 16.228411] systemd[1]: Starting Slices. |
| [ 16.243124] systemd[1]: Reached target Slices. |
| [ 16.247932] systemd[1]: Starting Remount Root and Kernel File Systems... |
| [ 17.550674] systemd[1]: Started Increase datagram queue length. |
| [ 17.557490] systemd[1]: Starting Syslog Socket. |
| [ 17.570673] systemd[1]: Listening on Syslog Socket. |
| [ 17.575754] systemd[1]: Starting Sockets. |
| [ 17.590598] systemd[1]: Reached target Sockets. |
| [ 17.595266] systemd[1]: Starting Journal Service... |
| [ 17.622655] systemd[1]: Started Journal Service. |
| [ 21.820683] systemd-udevd[189]: starting version 215 |
| [ 22.876902] systemd-journald[172]: Received request to flush runtime journal from PID 1 |
| [ 33.007548] k10temp 0000:00:18.3: unreliable CPU thermal sensor; monitoring disabled |
| [ 33.015547] k10temp 0000:00:19.3: unreliable CPU thermal sensor; monitoring disabled |
| [ 33.623290] EDAC MC: Ver: 3.0.0 |
| [ 33.823465] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4 |
| [ 33.951966] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input2 |
| [ 33.960685] ACPI: Power Button [PWRB] |
| [ 33.964521] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input3 |
| [ 33.972050] ACPI: Power Button [PWRF] |
| [ 33.976392] MCE: In-kernel MCE decoding enabled. |
| [ 34.427985] SCSI subsystem initialized |
| [ 34.500711] FDC 0 is a post-1991 82077 |
| [ 34.540100] i2c i2c-0: nForce2 SMBus adapter at 0x2c80 |
| [ 34.545371] i2c i2c-1: nForce2 SMBus adapter at 0x2cc0 |
| [ 34.604113] AMD64 EDAC driver v3.4.0 |
| [ 34.607860] EDAC amd64: DRAM ECC enabled. |
| [ 34.611970] EDAC amd64: F10h detected (node 0). |
| [ 34.616619] EDAC MC: DCT0 chip selects: |
| [ 34.616621] EDAC amd64: MC: 0: 0MB 1: 0MB |
| [ 34.621417] EDAC amd64: MC: 2: 0MB 3: 0MB |
| [ 34.626219] EDAC amd64: MC: 4: 0MB 5: 0MB |
| [ 34.631015] EDAC amd64: MC: 6: 1024MB 7: 1024MB |
| [ 34.635806] EDAC MC: DCT1 chip selects: |
| [ 34.635808] EDAC amd64: MC: 0: 0MB 1: 0MB |
| [ 34.640605] EDAC amd64: MC: 2: 0MB 3: 0MB |
| [ 34.645397] EDAC amd64: MC: 4: 0MB 5: 0MB |
| [ 34.650188] EDAC amd64: MC: 6: 1024MB 7: 1024MB |
| [ 34.654978] EDAC amd64: using x4 syndromes. |
| [ 34.659249] EDAC amd64: MCT channel count: 2 |
| [ 34.663637] EDAC amd64: CS6: Registered DDR2 RAM |
| [ 34.668347] EDAC amd64: CS7: Registered DDR2 RAM |
| [ 34.673255] EDAC MC0: Giving out device to module amd64_edac controller F10h: DEV 0000:00:18.2 (INTERRUPT) |
| [ 34.683092] EDAC amd64: DRAM ECC enabled. |
| [ 34.687268] EDAC amd64: F10h detected (node 1). |
| [ 34.691910] EDAC MC: DCT0 chip selects: |
| [ 34.691912] EDAC amd64: MC: 0: 1024MB 1: 0MB |
| [ 34.696696] EDAC amd64: MC: 2: 0MB 3: 0MB |
| [ 34.701496] EDAC amd64: MC: 4: 0MB 5: 0MB |
| [ 34.706301] EDAC amd64: MC: 6: 0MB 7: 0MB |
| [ 34.711099] EDAC MC: DCT1 chip selects: |
| [ 34.711101] EDAC amd64: MC: 0: 0MB 1: 0MB |
| [ 34.715894] EDAC amd64: MC: 2: 0MB 3: 0MB |
| [ 34.720687] EDAC amd64: MC: 4: 0MB 5: 0MB |
| [ 34.725488] EDAC amd64: MC: 6: 0MB 7: 0MB |
| [ 34.730283] EDAC amd64: using x4 syndromes. |
| [ 34.734554] EDAC amd64: MCT channel count: 1 |
| [ 34.738967] EDAC amd64: CS0: Registered DDR2 RAM |
| [ 34.743851] EDAC MC1: Giving out device to module amd64_edac controller F10h: DEV 0000:00:19.2 (INTERRUPT) |
| [ 34.753707] EDAC PCI0: Giving out device to module amd64_edac controller EDAC PCI controller: DEV 0000:00:18.2 (POLLED) |
| [ 35.061238] libata version 3.00 loaded. |
| [ 35.070078] input: PC Speaker as /devices/platform/pcspkr/input/input4 |
| [ 35.159618] acpi-cpufreq: overriding BIOS provided _PSD data |
| [ 35.279305] sata_nv 0000:00:07.0: version 3.5 |
| [ 35.279690] ACPI: PCI Interrupt Link [LSA0] enabled at IRQ 21 |
| [ 35.286367] scsi0 : sata_nv |
| [ 35.289697] scsi1 : sata_nv |
| [ 35.292804] ata1: SATA max UDMA/133 cmd 0x3050 ctl 0x3070 bmdma 0x3030 irq 21 |
| [ 35.300061] ata2: SATA max UDMA/133 cmd 0x3058 ctl 0x3074 bmdma 0x3038 irq 21 |
| [ 35.308585] ACPI: PCI Interrupt Link [LSA1] enabled at IRQ 20 |
| [ 35.315222] scsi2 : sata_nv |
| [ 35.318390] scsi3 : sata_nv |
| [ 35.321401] ata3: SATA max UDMA/133 cmd 0x3060 ctl 0x3078 bmdma 0x3040 irq 20 |
| [ 35.328653] ata4: SATA max UDMA/133 cmd 0x3068 ctl 0x307c bmdma 0x3048 irq 20 |
| [ 35.345757] pata_amd 0000:00:06.0: version 0.4.1 |
| [ 35.346613] scsi4 : pata_amd |
| [ 35.349960] scsi5 : pata_amd |
| [ 35.353065] ata5: PATA max UDMA/133 cmd 0x1f0 ctl 0x3f6 bmdma 0x3020 irq 14 |
| [ 35.360137] ata6: PATA max UDMA/133 cmd 0x170 ctl 0x376 bmdma 0x3028 irq 15 |
| [ 35.616329] ata1: SATA link down (SStatus 0 SControl 300) |
| [ 35.644325] ata3: SATA link down (SStatus 0 SControl 300) |
| [ 35.932220] ata2: SATA link down (SStatus 0 SControl 300) |
| [ 36.248129] ata4: SATA link down (SStatus 0 SControl 300) |
| [ 36.440773] kvm: Nested Virtualization enabled |
| [ 36.445378] kvm: Nested Paging enabled |
| [ 75.014739] *****RAPTOR ENGINEERING AUTOMATED TEST BOOT SUCCESS***** |