| [ 0.000000] Initializing cgroup subsys cpuset |
| [ 0.000000] Initializing cgroup subsys cpu |
| [ 0.000000] Initializing cgroup subsys cpuacct |
| [ 0.000000] Linux version 3.16.0-4-amd64 (debian-kernel@lists.debian.org) (gcc version 4.8.4 (Debian 4.8.4-1) ) #1 SMP Debian 3.16.7-ckt7-1 (2015-03-01) |
| [ 0.000000] Command line: root=/dev/nfs initrd=initrd-cb-test-tgt rootfstype=nfs nfsroot=192.168.1.50:/mnt/udata/nfsroots/cb-test-tgt,v3,hard,nointr,tcp ip=192.168.20.36::192.168.20.1:255.255.255.0:embed-o-matic:eth0:off console=tty0 console=ttyS0,115200n8 rw BOOT_IMAGE=vmlinuz-cb-test-tgt |
| [ 0.000000] e820: BIOS-provided physical RAM map: |
| [ 0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009fbff] usable |
| [ 0.000000] BIOS-e820: [mem 0x000000000009fc00-0x000000000009ffff] reserved |
| [ 0.000000] BIOS-e820: [mem 0x00000000000f0000-0x00000000000fffff] reserved |
| [ 0.000000] BIOS-e820: [mem 0x0000000000100000-0x00000000dffaefff] usable |
| [ 0.000000] BIOS-e820: [mem 0x00000000dffaf000-0x00000000efffffff] reserved |
| [ 0.000000] BIOS-e820: [mem 0x0000000100000000-0x000000019fffffff] usable |
| [ 0.000000] NX (Execute Disable) protection: active |
| [ 0.000000] SMBIOS 2.7 present. |
| [ 0.000000] DMI: ASUS KFSN4-DRE/KFSN4-DRE, BIOS 4.0-8324-g3d78ece 03/17/2015 |
| [ 0.000000] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved |
| [ 0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable |
| [ 0.000000] AGP: No AGP bridge found |
| [ 0.000000] e820: last_pfn = 0x1a0000 max_arch_pfn = 0x400000000 |
| [ 0.000000] MTRR default type: uncachable |
| [ 0.000000] MTRR fixed ranges enabled: |
| [ 0.000000] 00000-9FFFF write-back |
| [ 0.000000] A0000-BFFFF uncachable |
| [ 0.000000] C0000-FFFFF write-back |
| [ 0.000000] MTRR variable ranges enabled: |
| [ 0.000000] 0 base 000000000000 mask FFFF80000000 write-back |
| [ 0.000000] 1 base 000080000000 mask FFFFC0000000 write-back |
| [ 0.000000] 2 base 0000C0000000 mask FFFFE0000000 write-back |
| [ 0.000000] 3 base 0000F8000000 mask FFFFFC000000 write-combining |
| [ 0.000000] 4 disabled |
| [ 0.000000] 5 disabled |
| [ 0.000000] 6 disabled |
| [ 0.000000] 7 disabled |
| [ 0.000000] TOM2: 00000001a0000000 aka 6656M |
| [ 0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106 |
| [ 0.000000] e820: last_pfn = 0xdffaf max_arch_pfn = 0x400000000 |
| [ 0.000000] found SMP MP-table at [mem 0x000f1490-0x000f149f] mapped at [ffff8800000f1490] |
| [ 0.000000] Base memory trampoline at [ffff880000099000] 99000 size 24576 |
| [ 0.000000] Using GB pages for direct mapping |
| [ 0.000000] init_memory_mapping: [mem 0x00000000-0x000fffff] |
| [ 0.000000] [mem 0x00000000-0x000fffff] page 4k |
| [ 0.000000] BRK [0x01af3000, 0x01af3fff] PGTABLE |
| [ 0.000000] BRK [0x01af4000, 0x01af4fff] PGTABLE |
| [ 0.000000] BRK [0x01af5000, 0x01af5fff] PGTABLE |
| [ 0.000000] init_memory_mapping: [mem 0x19fe00000-0x19fffffff] |
| [ 0.000000] [mem 0x19fe00000-0x19fffffff] page 2M |
| [ 0.000000] BRK [0x01af6000, 0x01af6fff] PGTABLE |
| [ 0.000000] init_memory_mapping: [mem 0x19c000000-0x19fdfffff] |
| [ 0.000000] [mem 0x19c000000-0x19fdfffff] page 2M |
| [ 0.000000] init_memory_mapping: [mem 0x180000000-0x19bffffff] |
| [ 0.000000] [mem 0x180000000-0x19bffffff] page 2M |
| [ 0.000000] init_memory_mapping: [mem 0x00100000-0xdffaefff] |
| [ 0.000000] [mem 0x00100000-0x001fffff] page 4k |
| [ 0.000000] [mem 0x00200000-0x3fffffff] page 2M |
| [ 0.000000] [mem 0x40000000-0xbfffffff] page 1G |
| [ 0.000000] [mem 0xc0000000-0xdfdfffff] page 2M |
| [ 0.000000] [mem 0xdfe00000-0xdffaefff] page 4k |
| [ 0.000000] init_memory_mapping: [mem 0x100000000-0x17fffffff] |
| [ 0.000000] [mem 0x100000000-0x17fffffff] page 1G |
| [ 0.000000] RAMDISK: [mem 0x7f775000-0x7fffefff] |
| [ 0.000000] ACPI: Early table checksum verification disabled |
| [ 0.000000] ACPI: RSDP 0x00000000000F16B0 000024 (v02 CORE ) |
| [ 0.000000] ACPI: XSDT 0x00000000DFFB80E0 000064 (v01 CORE COREBOOT 00000000 CORE 00000000) |
| [ 0.000000] ACPI: FACP 0x00000000DFFBA8A0 000074 (v01 CORE COREBOOT 00000000 CORE 00000000) |
| [ 0.000000] ACPI: DSDT 0x00000000DFFB8250 002644 (v02 ASUS COREBOOT 00000001 INTL 20140114) |
| [ 0.000000] ACPI: FACS 0x00000000DFFB8210 000040 |
| [ 0.000000] ACPI: SSDT 0x00000000DFFBA9A0 0010DF (v02 CORE COREBOOT 0000002A CORE 0000002A) |
| [ 0.000000] ACPI: APIC 0x00000000DFFBBA80 0000FE (v01 CORE COREBOOT 00000000 CORE 00000000) |
| [ 0.000000] ACPI: SRAT 0x00000000DFFBBB80 000190 (v01 CORE COREBOOT 00000000 CORE 00000000) |
| [ 0.000000] ACPI: SLIT 0x00000000DFFBBD10 000030 (v01 CORE COREBOOT 00000000 CORE 00000000) |
| [ 0.000000] ACPI: HPET 0x00000000DFFBBD40 000038 (v01 CORE COREBOOT 00000000 CORE 00000000) |
| [ 0.000000] ACPI: SRAT 0x00000000DFFBBD80 000190 (v01 CORE COREBOOT 00000000 CORE 00000000) |
| [ 0.000000] ACPI: SLIT 0x00000000DFFBBF10 000030 (v01 CORE COREBOOT 00000000 CORE 00000000) |
| [ 0.000000] ACPI: Local APIC address 0xfee00000 |
| [ 0.000000] SRAT: PXM 0 -> APIC 0x00 -> Node 0 |
| [ 0.000000] SRAT: PXM 0 -> APIC 0x01 -> Node 0 |
| [ 0.000000] SRAT: PXM 0 -> APIC 0x02 -> Node 0 |
| [ 0.000000] SRAT: PXM 0 -> APIC 0x03 -> Node 0 |
| [ 0.000000] SRAT: PXM 0 -> APIC 0x04 -> Node 0 |
| [ 0.000000] SRAT: PXM 0 -> APIC 0x05 -> Node 0 |
| [ 0.000000] SRAT: PXM 1 -> APIC 0x08 -> Node 1 |
| [ 0.000000] SRAT: PXM 1 -> APIC 0x09 -> Node 1 |
| [ 0.000000] SRAT: PXM 1 -> APIC 0x0a -> Node 1 |
| [ 0.000000] SRAT: PXM 1 -> APIC 0x0b -> Node 1 |
| [ 0.000000] SRAT: PXM 1 -> APIC 0x0c -> Node 1 |
| [ 0.000000] SRAT: PXM 1 -> APIC 0x0d -> Node 1 |
| [ 0.000000] SRAT: Node 0 PXM 0 [mem 0x00000000-0x0009ffff] |
| [ 0.000000] SRAT: Node 2 PXM 7 [mem 0x00100000-0xdfffffff] |
| [ 0.000000] SRAT: Node 0 PXM 0 [mem 0x00100000-0xdfffffff] |
| [ 0.000000] SRAT: Node 0 PXM 0 [mem 0x100000000-0x19fffffff] |
| [ 0.000000] NUMA: Initialized distance table, cnt=3 |
| [ 0.000000] NUMA: node 2 [mem 0x00100000-0xdfffffff] overlaps with node 0 [mem 0x00100000-0xdfffffff] |
| [ 0.000000] Scanning NUMA topology in Northbridge 24 |
| [ 0.000000] Number of physical nodes 2 |
| [ 0.000000] Node 0 MemBase 0000000000000000 Limit 00000001a0000000 |
| [ 0.000000] Skipping disabled node 1 |
| [ 0.000000] Initmem setup node 0 [mem 0x00000000-0x19fffffff] |
| [ 0.000000] NODE_DATA [mem 0x19fff9000-0x19fffdfff] |
| [ 0.000000] [ffffea0000000000-ffffea0005bfffff] PMD -> [ffff880199600000-ffff88019ebfffff] on node 0 |
| [ 0.000000] Zone ranges: |
| [ 0.000000] DMA [mem 0x00001000-0x00ffffff] |
| [ 0.000000] DMA32 [mem 0x01000000-0xffffffff] |
| [ 0.000000] Normal [mem 0x100000000-0x19fffffff] |
| [ 0.000000] Movable zone start for each node |
| [ 0.000000] Early memory node ranges |
| [ 0.000000] node 0: [mem 0x00001000-0x0009efff] |
| [ 0.000000] node 0: [mem 0x00100000-0xdffaefff] |
| [ 0.000000] node 0: [mem 0x100000000-0x19fffffff] |
| [ 0.000000] On node 0 totalpages: 1572685 |
| [ 0.000000] DMA zone: 56 pages used for memmap |
| [ 0.000000] DMA zone: 21 pages reserved |
| [ 0.000000] DMA zone: 3998 pages, LIFO batch:0 |
| [ 0.000000] DMA32 zone: 12487 pages used for memmap |
| [ 0.000000] DMA32 zone: 913327 pages, LIFO batch:31 |
| [ 0.000000] Normal zone: 8960 pages used for memmap |
| [ 0.000000] Normal zone: 655360 pages, LIFO batch:31 |
| [ 0.000000] ACPI: PM-Timer IO Port: 0x2008 |
| [ 0.000000] ACPI: Local APIC address 0xfee00000 |
| [ 0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled) |
| [ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled) |
| [ 0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x02] enabled) |
| [ 0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x03] enabled) |
| [ 0.000000] ACPI: LAPIC (acpi_id[0x04] lapic_id[0x04] enabled) |
| [ 0.000000] ACPI: LAPIC (acpi_id[0x05] lapic_id[0x05] enabled) |
| [ 0.000000] ACPI: LAPIC (acpi_id[0x06] lapic_id[0x08] enabled) |
| [ 0.000000] ACPI: LAPIC (acpi_id[0x07] lapic_id[0x09] enabled) |
| [ 0.000000] ACPI: LAPIC (acpi_id[0x08] lapic_id[0x0a] enabled) |
| [ 0.000000] ACPI: LAPIC (acpi_id[0x09] lapic_id[0x0b] enabled) |
| [ 0.000000] ACPI: LAPIC (acpi_id[0x0a] lapic_id[0x0c] enabled) |
| [ 0.000000] ACPI: LAPIC (acpi_id[0x0b] lapic_id[0x0d] enabled) |
| [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1]) |
| [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1]) |
| [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x02] high edge lint[0x1]) |
| [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x03] high edge lint[0x1]) |
| [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x04] high edge lint[0x1]) |
| [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x05] high edge lint[0x1]) |
| [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x06] high edge lint[0x1]) |
| [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x07] high edge lint[0x1]) |
| [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x08] high edge lint[0x1]) |
| [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x09] high edge lint[0x1]) |
| [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x0a] high edge lint[0x1]) |
| [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x0b] high edge lint[0x1]) |
| [ 0.000000] ACPI: IOAPIC (id[0x18] address[0xfec00000] gsi_base[0]) |
| [ 0.000000] IOAPIC[0]: apic_id 24, version 17, address 0xfec00000, GSI 0-23 |
| [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level) |
| [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 14 global_irq 14 high edge) |
| [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 15 global_irq 15 high edge) |
| [ 0.000000] ACPI: IRQ9 used by override. |
| [ 0.000000] ACPI: IRQ14 used by override. |
| [ 0.000000] ACPI: IRQ15 used by override. |
| [ 0.000000] Using ACPI (MADT) for SMP configuration information |
| [ 0.000000] ACPI: HPET id: 0x10de8201 base: 0xfed00000 |
| [ 0.000000] smpboot: Allowing 12 CPUs, 0 hotplug CPUs |
| [ 0.000000] nr_irqs_gsi: 40 |
| [ 0.000000] PM: Registered nosave memory: [mem 0x0009f000-0x0009ffff] |
| [ 0.000000] PM: Registered nosave memory: [mem 0x000a0000-0x000effff] |
| [ 0.000000] PM: Registered nosave memory: [mem 0x000f0000-0x000fffff] |
| [ 0.000000] PM: Registered nosave memory: [mem 0xdffaf000-0xefffffff] |
| [ 0.000000] PM: Registered nosave memory: [mem 0xf0000000-0xffffffff] |
| [ 0.000000] e820: [mem 0xf0000000-0xffffffff] available for PCI devices |
| [ 0.000000] Booting paravirtualized kernel on bare hardware |
| [ 0.000000] setup_percpu: NR_CPUS:512 nr_cpumask_bits:512 nr_cpu_ids:12 nr_node_ids:1 |
| [ 0.000000] PERCPU: Embedded 27 pages/cpu @ffff88019fc00000 s80896 r8192 d21504 u131072 |
| [ 0.000000] pcpu-alloc: s80896 r8192 d21504 u131072 alloc=1*2097152 |
| [ 0.000000] pcpu-alloc: [0] 00 01 02 03 04 05 06 07 08 09 10 11 -- -- -- -- |
| [ 0.000000] Built 1 zonelists in Node order, mobility grouping on. Total pages: 1551161 |
| [ 0.000000] Policy zone: Normal |
| [ 0.000000] Kernel command line: root=/dev/nfs initrd=initrd-cb-test-tgt rootfstype=nfs nfsroot=192.168.1.50:/mnt/udata/nfsroots/cb-test-tgt,v3,hard,nointr,tcp ip=192.168.20.36::192.168.20.1:255.255.255.0:embed-o-matic:eth0:off console=tty0 console=ttyS0,115200n8 rw BOOT_IMAGE=vmlinuz-cb-test-tgt |
| [ 0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes) |
| [ 0.000000] AGP: Checking aperture... |
| [ 0.000000] AGP: No AGP bridge found |
| [ 0.000000] AGP: Node 0: aperture [bus addr 0x7000000000-0x7001ffffff] (32MB) |
| [ 0.000000] Aperture beyond 4GB. Ignoring. |
| [ 0.000000] AGP: Your BIOS doesn't leave a aperture memory hole |
| [ 0.000000] AGP: Please enable the IOMMU option in the BIOS setup |
| [ 0.000000] AGP: This costs you 64MB of RAM |
| [ 0.000000] AGP: Mapping aperture over RAM [mem 0xd4000000-0xd7ffffff] (65536KB) |
| [ 0.000000] PM: Registered nosave memory: [mem 0xd4000000-0xd7ffffff] |
| [ 0.000000] Memory: 6049452K/6290740K available (5203K kernel code, 943K rwdata, 1832K rodata, 1204K init, 840K bss, 241288K reserved) |
| [ 0.000000] Hierarchical RCU implementation. |
| [ 0.000000] RCU dyntick-idle grace-period acceleration is enabled. |
| [ 0.000000] RCU restricting CPUs from NR_CPUS=512 to nr_cpu_ids=12. |
| [ 0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=12 |
| [ 0.000000] NR_IRQS:33024 nr_irqs:776 16 |
| [ 0.000000] spurious 8259A interrupt: IRQ7. |
| [ 0.000000] Console: colour VGA+ 80x25 |
| [ 0.000000] console [tty0] enabled |
| [ 0.000000] console [ttyS0] enabled |
| [ 0.000000] hpet clockevent registered |
| [ 0.000000] tsc: Fast TSC calibration using PIT |
| [ 0.000000] tsc: Detected 2412.386 MHz processor |
| [ 0.000030] Calibrating delay loop (skipped), value calculated using timer frequency.. 4824.77 BogoMIPS (lpj=9649544) |
| [ 0.010794] pid_max: default: 32768 minimum: 301 |
| [ 0.015489] ACPI: Core revision 20140424 |
| [ 0.021152] ACPI: All ACPI Tables successfully acquired |
| [ 0.026587] Security Framework initialized |
| [ 0.030764] AppArmor: AppArmor disabled by boot time parameter |
| [ 0.036668] Yama: disabled by default; enable with sysctl kernel.yama.* |
| [ 0.043969] Dentry cache hash table entries: 1048576 (order: 11, 8388608 bytes) |
| [ 0.056756] Inode-cache hash table entries: 524288 (order: 10, 4194304 bytes) |
| [ 0.066517] Mount-cache hash table entries: 16384 (order: 5, 131072 bytes) |
| [ 0.073482] Mountpoint-cache hash table entries: 16384 (order: 5, 131072 bytes) |
| [ 0.081327] Initializing cgroup subsys memory |
| [ 0.085776] Initializing cgroup subsys devices |
| [ 0.090297] Initializing cgroup subsys freezer |
| [ 0.094812] Initializing cgroup subsys net_cls |
| [ 0.100394] Initializing cgroup subsys blkio |
| [ 0.104734] Initializing cgroup subsys perf_event |
| [ 0.109503] Initializing cgroup subsys net_prio |
| [ 0.114128] tseg: 0000000000 |
| [ 0.114138] CPU: Physical Processor ID: 0 |
| [ 0.118218] CPU: Processor Core ID: 0 |
| [ 0.121950] mce: CPU supports 6 MCE banks |
| [ 0.126033] LVT offset 0 assigned for vector 0xf9 |
| [ 0.130813] Last level iTLB entries: 4KB 512, 2MB 16, 4MB 8 |
| Last level dTLB entries: 4KB 512, 2MB 128, 4MB 64, 1GB 0 |
| tlb_flushall_shift: 6 |
| [ 0.146234] Freeing SMP alternatives memory: 20K (ffffffff81a1a000 - ffffffff81a1f000) |
| [ 0.155108] ftrace: allocating 21601 entries in 85 pages |
| [ 0.168342] Switched APIC routing to physical flat. |
| [ 0.173647] ..TIMER: vector=0x30 apic1=0 pin1=0 apic2=0 pin2=0 |
| [ 0.219200] smpboot: CPU0: Six-Core AMD Opteron(tm) Processor 2431 (fam: 10, model: 08, stepping: 00) |
| [ 0.336306] Performance Events: AMD PMU driver. |
| [ 0.340959] ... version: 0 |
| [ 0.345032] ... bit width: 48 |
| [ 0.349187] ... generic registers: 4 |
| [ 0.353248] ... value mask: 0000ffffffffffff |
| [ 0.358626] ... max period: 00007fffffffffff |
| [ 0.363995] ... fixed-purpose events: 0 |
| [ 0.368068] ... event mask: 000000000000000f |
| [ 0.375482] NMI watchdog: enabled on all CPUs, permanently consumes one hw-PMU counter. |
| [ 0.383741] x86: Booting SMP configuration: |
| [ 0.387989] .... node #0, CPUs: #1 |
| [ 0.405724] do_IRQ: 1.55 No irq handler for vector (irq -1) |
| [ 0.418884] #2 |
| [ 0.418884] do_IRQ: 2.55 No irq handler for vector (irq -1) |
| [ 0.432035] #3 |
| [ 0.432035] do_IRQ: 3.55 No irq handler for vector (irq -1) |
| [ 0.445180] #4 |
| [ 0.445181] do_IRQ: 4.55 No irq handler for vector (irq -1) |
| [ 0.458328] #5 |
| [ 0.458328] do_IRQ: 5.55 No irq handler for vector (irq -1) |
| [ 0.568112] #6 |
| [ 0.568113] do_IRQ: 6.55 No irq handler for vector (irq -1) |
| [ 0.581254] #7 |
| [ 0.581254] do_IRQ: 7.55 No irq handler for vector (irq -1) |
| [ 0.594398] #8 |
| [ 0.594399] do_IRQ: 8.55 No irq handler for vector (irq -1) |
| [ 0.607549] #9 |
| [ 0.607550] do_IRQ: 9.55 No irq handler for vector (irq -1) |
| [ 0.620698] #10 |
| [ 0.620699] do_IRQ: 10.55 No irq handler for vector (irq -1) |
| [ 0.633842] #11 |
| [ 0.633842] x86: Booted up 1 node, 12 CPUs |
| [ 0.639931] smpboot: Total of 12 processors activated (57898.09 BogoMIPS) |
| [ 0.661031] devtmpfs: initialized |
| [ 0.671197] pinctrl core: initialized pinctrl subsystem |
| [ 0.676626] NET: Registered protocol family 16 |
| [ 0.681291] cpuidle: using governor ladder |
| [ 0.685465] cpuidle: using governor menu |
| [ 0.689468] node 0 link 1: io port [1000, 3fff] |
| [ 0.689471] TOM: 00000000e0000000 aka 3584M |
| [ 0.693716] Fam 10h mmconf [mem 0xe0000000-0xefffffff] |
| [ 0.693719] node 0 link 1: mmio [fc000000, fc3fffff] |
| [ 0.693722] node 0 link 1: mmio [f8000000, fbffffff] |
| [ 0.693723] TOM2: 00000001a0000000 aka 6656M |
| [ 0.698068] bus: [bus 00-05] on node 0 link 1 |
| [ 0.698070] bus: 00 [io 0x0000-0xffff] |
| [ 0.698071] bus: 00 [mem 0xf0000000-0xffffffff] |
| [ 0.698073] bus: 00 [mem 0x1a0000000-0xfcffffffff] |
| [ 0.698161] ACPI: bus type PCI registered |
| [ 0.702233] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5 |
| [ 0.708874] PCI: Using configuration type 1 for base access |
| [ 0.714519] PCI: Using configuration type 1 for extended access |
| [ 0.721070] mtrr: your CPUs had inconsistent variable MTRR settings |
| [ 0.727420] mtrr: probably your BIOS does not setup all CPUs. |
| [ 0.733237] mtrr: corrected configuration. |
| [ 0.748726] ACPI: Added _OSI(Module Device) |
| [ 0.753001] ACPI: Added _OSI(Processor Device) |
| [ 0.757507] ACPI: Added _OSI(3.0 _SCP Extensions) |
| [ 0.762279] ACPI: Added _OSI(Processor Aggregator Device) |
| [ 0.770414] ACPI: Interpreter enabled |
| [ 0.774154] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S2_] (20140424/hwxface-580) |
| [ 0.783576] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S3_] (20140424/hwxface-580) |
| [ 0.792995] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S4_] (20140424/hwxface-580) |
| [ 0.802411] ACPI: (supports S0 S1 S5) |
| [ 0.806139] ACPI: Using IOAPIC for interrupt routing |
| [ 0.811195] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug |
| [ 0.831473] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-05]) |
| [ 0.837724] acpi PNP0A03:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI] |
| [ 0.846016] acpi PNP0A03:00: _OSC: OS now controls [PCIeHotplug PME AER PCIeCapability] |
| [ 0.869048] acpi PNP0A03:00: host bridge window expanded to [io 0x0000-0x0cf7]; [io 0x03b0-0x03df] ignored |
| [ 0.879094] PCI host bridge to bus 0000:00 |
| [ 0.883257] pci_bus 0000:00: root bus resource [bus 00-05] |
| [ 0.888809] pci_bus 0000:00: root bus resource [io 0x0d00-0x3fff] |
| [ 0.895053] pci_bus 0000:00: root bus resource [mem 0xf8000000-0xfbffffff] |
| [ 0.901988] pci_bus 0000:00: root bus resource [mem 0xfc000000-0xfc3fffff] |
| [ 0.908923] pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7] |
| [ 0.915171] pci 0000:00:00.0: [10de:005e] type 00 class 0x058000 |
| [ 0.915315] pci 0000:00:01.0: [10de:0051] type 00 class 0x060100 |
| [ 0.915321] pci 0000:00:01.0: reg 0x10: [io 0x2c00-0x2c7f] |
| [ 0.915415] pci 0000:00:01.1: [10de:0052] type 00 class 0x0c0500 |
| [ 0.915423] pci 0000:00:01.1: reg 0x10: [io 0x3000-0x301f] |
| [ 0.915438] pci 0000:00:01.1: reg 0x20: [io 0x2c80-0x2cbf] |
| [ 0.915442] pci 0000:00:01.1: reg 0x24: [io 0x2cc0-0x2cff] |
| [ 0.915460] pci 0000:00:01.1: PME# supported from D3hot D3cold |
| [ 0.915538] pci 0000:00:02.0: [10de:005a] type 00 class 0x0c0310 |
| [ 0.915547] pci 0000:00:02.0: reg 0x10: [mem 0xfc300000-0xfc300fff] |
| [ 0.915571] pci 0000:00:02.0: supports D1 D2 |
| [ 0.915580] pci 0000:00:02.0: PME# supported from D0 D1 D2 D3hot D3cold |
| [ 0.915620] pci 0000:00:02.0: System wakeup disabled by ACPI |
| [ 0.921395] pci 0000:00:02.1: [10de:005b] type 00 class 0x0c0320 |
| [ 0.921405] pci 0000:00:02.1: reg 0x10: [mem 0xfc303000-0xfc3030ff] |
| [ 0.921442] pci 0000:00:02.1: supports D1 D2 |
| [ 0.921444] pci 0000:00:02.1: PME# supported from D0 D1 D2 D3hot D3cold |
| [ 0.921484] pci 0000:00:02.1: System wakeup disabled by ACPI |
| [ 0.927262] pci 0000:00:06.0: [10de:0053] type 00 class 0x01018a |
| [ 0.927286] pci 0000:00:06.0: reg 0x20: [io 0x3020-0x302f] |
| [ 0.927296] pci 0000:00:06.0: legacy IDE quirk: reg 0x10: [io 0x01f0-0x01f7] |
| [ 0.934495] pci 0000:00:06.0: legacy IDE quirk: reg 0x14: [io 0x03f6] |
| [ 0.941083] pci 0000:00:06.0: legacy IDE quirk: reg 0x18: [io 0x0170-0x0177] |
| [ 0.948278] pci 0000:00:06.0: legacy IDE quirk: reg 0x1c: [io 0x0376] |
| [ 0.954948] pci 0000:00:07.0: [10de:0054] type 00 class 0x010185 |
| [ 0.954957] pci 0000:00:07.0: reg 0x10: [io 0x3050-0x3057] |
| [ 0.954961] pci 0000:00:07.0: reg 0x14: [io 0x3070-0x3073] |
| [ 0.954965] pci 0000:00:07.0: reg 0x18: [io 0x3058-0x305f] |
| [ 0.954969] pci 0000:00:07.0: reg 0x1c: [io 0x3074-0x3077] |
| [ 0.954973] pci 0000:00:07.0: reg 0x20: [io 0x3030-0x303f] |
| [ 0.954977] pci 0000:00:07.0: reg 0x24: [mem 0xfc301000-0xfc301fff] |
| [ 0.955064] pci 0000:00:08.0: [10de:0055] type 00 class 0x010185 |
| [ 0.955076] pci 0000:00:08.0: reg 0x10: [io 0x3060-0x3067] |
| [ 0.955080] pci 0000:00:08.0: reg 0x14: [io 0x3078-0x307b] |
| [ 0.955084] pci 0000:00:08.0: reg 0x18: [io 0x3068-0x306f] |
| [ 0.955088] pci 0000:00:08.0: reg 0x1c: [io 0x307c-0x307f] |
| [ 0.955092] pci 0000:00:08.0: reg 0x20: [io 0x3040-0x304f] |
| [ 0.955096] pci 0000:00:08.0: reg 0x24: [mem 0xfc302000-0xfc302fff] |
| [ 0.955178] pci 0000:00:09.0: [10de:005c] type 01 class 0x060400 |
| [ 0.955239] pci 0000:00:09.0: System wakeup disabled by ACPI |
| [ 0.961012] pci 0000:00:0b.0: [10de:005d] type 01 class 0x060400 |
| [ 0.961052] pci 0000:00:0b.0: PME# supported from D0 D1 D2 D3hot D3cold |
| [ 0.961093] pci 0000:00:0b.0: System wakeup disabled by ACPI |
| [ 0.966858] pci 0000:00:0c.0: [10de:005d] type 01 class 0x060400 |
| [ 0.966896] pci 0000:00:0c.0: PME# supported from D0 D1 D2 D3hot D3cold |
| [ 0.966937] pci 0000:00:0c.0: System wakeup disabled by ACPI |
| [ 0.972708] pci 0000:00:0d.0: [10de:005d] type 01 class 0x060400 |
| [ 0.972743] pci 0000:00:0d.0: PME# supported from D0 D1 D2 D3hot D3cold |
| [ 0.972786] pci 0000:00:0d.0: System wakeup disabled by ACPI |
| [ 0.978557] pci 0000:00:0e.0: [10de:005d] type 01 class 0x060400 |
| [ 0.978583] pci 0000:00:0e.0: PME# supported from D0 D1 D2 D3hot D3cold |
| [ 0.978632] pci 0000:00:0e.0: System wakeup disabled by ACPI |
| [ 0.984406] pci 0000:00:18.0: [1022:1200] type 00 class 0x060000 |
| [ 0.984492] pci 0000:00:18.1: [1022:1201] type 00 class 0x060000 |
| [ 0.984569] pci 0000:00:18.2: [1022:1202] type 00 class 0x060000 |
| [ 0.984644] pci 0000:00:18.3: [1022:1203] type 00 class 0x060000 |
| [ 0.984729] pci 0000:00:18.4: [1022:1204] type 00 class 0x060000 |
| [ 0.984806] pci 0000:00:19.0: [1022:1200] type 00 class 0x060000 |
| [ 0.984903] pci 0000:00:19.1: [1022:1201] type 00 class 0x060000 |
| [ 0.984983] pci 0000:00:19.2: [1022:1202] type 00 class 0x060000 |
| [ 0.985064] pci 0000:00:19.3: [1022:1203] type 00 class 0x060000 |
| [ 0.985150] pci 0000:00:19.4: [1022:1204] type 00 class 0x060000 |
| [ 0.985271] pci 0000:01:04.0: [18ca:0020] type 00 class 0x030000 |
| [ 0.985284] pci 0000:01:04.0: reg 0x10: [mem 0xf8000000-0xfbffffff pref] |
| [ 0.985292] pci 0000:01:04.0: reg 0x14: [mem 0xfc000000-0xfc03ffff] |
| [ 0.985300] pci 0000:01:04.0: reg 0x18: [io 0x1000-0x107f] |
| [ 0.985333] pci 0000:01:04.0: supports D1 D2 |
| [ 0.985403] pci 0000:00:09.0: PCI bridge to [bus 01] |
| [ 0.990432] pci 0000:00:09.0: bridge window [io 0x1000-0x1fff] |
| [ 0.990434] pci 0000:00:09.0: bridge window [mem 0xfc000000-0xfc0fffff] |
| [ 0.990437] pci 0000:00:09.0: bridge window [mem 0xf8000000-0xfbffffff pref] |
| [ 0.990496] pci 0000:02:00.0: [14e4:1659] type 00 class 0x020000 |
| [ 0.990528] pci 0000:02:00.0: reg 0x10: [mem 0xfc100000-0xfc10ffff 64bit] |
| [ 0.990561] pci 0000:02:00.0: reg 0x30: [mem 0x29400000-0x2940ffff pref] |
| [ 0.990633] pci 0000:02:00.0: PME# supported from D3hot D3cold |
| [ 0.990690] pci 0000:02:00.0: disabling ASPM on pre-1.1 PCIe device. You can enable it with 'pcie_aspm=force' |
| [ 1.000782] pci 0000:00:0b.0: PCI bridge to [bus 02] |
| [ 1.005816] pci 0000:00:0b.0: bridge window [mem 0xfc100000-0xfc1fffff] |
| [ 1.005877] pci 0000:03:00.0: [14e4:1659] type 00 class 0x020000 |
| [ 1.005909] pci 0000:03:00.0: reg 0x10: [mem 0xfc200000-0xfc20ffff 64bit] |
| [ 1.005995] pci 0000:03:00.0: PME# supported from D3hot D3cold |
| [ 1.006062] pci 0000:03:00.0: disabling ASPM on pre-1.1 PCIe device. You can enable it with 'pcie_aspm=force' |
| [ 1.016146] pci 0000:00:0c.0: PCI bridge to [bus 03] |
| [ 1.021172] pci 0000:00:0c.0: bridge window [mem 0xfc200000-0xfc2fffff] |
| [ 1.021217] pci 0000:00:0d.0: PCI bridge to [bus 04] |
| [ 1.026291] pci 0000:00:0e.0: PCI bridge to [bus 05] |
| [ 1.031334] pci_bus 0000:00: on NUMA node 0 |
| [ 1.031402] ACPI: PCI Interrupt Link [LNKA] (IRQs *16 17 18 19) |
| [ 1.037798] ACPI: PCI Interrupt Link [LNKB] (IRQs 16 *17 18 19) |
| [ 1.044178] ACPI: PCI Interrupt Link [LNKC] (IRQs 16 17 18 19) *0, disabled. |
| [ 1.051788] ACPI: PCI Interrupt Link [LNKD] (IRQs 16 17 18 19) *0, disabled. |
| [ 1.059390] ACPI: PCI Interrupt Link [LNKE] (IRQs 16 17 18 19) *0, disabled. |
| [ 1.066980] ACPI: PCI Interrupt Link [LLAS] (IRQs 20 21 22 23) *0, disabled. |
| [ 1.074592] ACPI: PCI Interrupt Link [LUOH] (IRQs 20 21 22 *23) |
| [ 1.080961] ACPI: PCI Interrupt Link [LUEH] (IRQs 20 21 *22 23) |
| [ 1.087347] ACPI: PCI Interrupt Link [LAUD] (IRQs 20 21 22 23) *0, disabled. |
| [ 1.094956] ACPI: PCI Interrupt Link [LMOD] (IRQs 20 21 22 23) *0, disabled. |
| [ 1.102564] ACPI: PCI Interrupt Link [LPA0] (IRQs 20 21 22 23) *0, disabled. |
| [ 1.110179] ACPI: PCI Interrupt Link [LSA0] (IRQs 20 *21 22 23) |
| [ 1.116558] ACPI: PCI Interrupt Link [LSA1] (IRQs *20 21 22 23) |
| [ 1.122949] ACPI: PCI Interrupt Link [LEMA] (IRQs 20 21 22 23) *0, disabled. |
| [ 1.130551] ACPI: PCI Interrupt Link [LUB0] (IRQs 20 21 22 23) *0, disabled. |
| [ 1.138159] ACPI: PCI Interrupt Link [LUB2] (IRQs 20 21 22 23) *0, disabled. |
| [ 1.145759] ACPI: PCI Interrupt Link [LKSM] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled. |
| [ 1.154830] ACPI: PCI Interrupt Link [LNIA] (IRQs 16) *0, disabled. |
| [ 1.161498] ACPI: PCI Interrupt Link [LNIB] (IRQs 17) *0, disabled. |
| [ 1.168174] ACPI: PCI Interrupt Link [LNIC] (IRQs 18) *0, disabled. |
| [ 1.174840] ACPI: PCI Interrupt Link [LNND] (IRQs 19) *0, disabled. |
| [ 1.181719] ACPI: Enabled 1 GPEs in block 00 to 1F |
| [ 1.186874] vgaarb: setting as boot device: PCI:0000:01:04.0 |
| [ 1.192631] vgaarb: device added: PCI:0000:01:04.0,decodes=io+mem,owns=io+mem,locks=none |
| [ 1.200808] vgaarb: loaded |
| [ 1.203585] vgaarb: bridge control possible 0000:01:04.0 |
| [ 1.209083] PCI: Using ACPI for IRQ routing |
| [ 1.213338] PCI: pci_cache_line_size set to 64 bytes |
| [ 1.213384] e820: reserve RAM buffer [mem 0x0009fc00-0x0009ffff] |
| [ 1.213387] e820: reserve RAM buffer [mem 0xdffaf000-0xdfffffff] |
| [ 1.213603] HPET: 3 timers in total, 0 timers will be used for per-cpu timer |
| [ 1.220729] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 31 |
| [ 1.225989] hpet0: 3 comparators, 32-bit 25.000000 MHz counter |
| [ 1.234976] Switched to clocksource hpet |
| [ 1.246869] pnp: PnP ACPI init |
| [ 1.250036] ACPI: bus type PNP registered |
| [ 1.254490] pnp 00:00: Plug and Play ACPI device, IDs PNP0303 PNP030b (active) |
| [ 1.254542] pnp 00:01: Plug and Play ACPI device, IDs PNP0f03 PNP0f13 (active) |
| [ 1.254598] pnp 00:02: Plug and Play ACPI device, IDs PNP0501 (active) |
| [ 1.254651] pnp 00:03: Plug and Play ACPI device, IDs PNP0501 (active) |
| [ 1.254679] pnp 00:04: [dma 2] |
| [ 1.254704] pnp 00:04: Plug and Play ACPI device, IDs PNP0700 (active) |
| [ 1.254720] pnp: PnP ACPI: found 5 devices |
| [ 1.258890] ACPI: bus type PNP unregistered |
| [ 1.270187] pci 0000:02:00.0: can't claim BAR 6 [mem 0x29400000-0x2940ffff pref]: no compatible bridge window |
| [ 1.280230] pci 0000:00:09.0: PCI bridge to [bus 01] |
| [ 1.285271] pci 0000:00:09.0: bridge window [io 0x1000-0x1fff] |
| [ 1.291430] pci 0000:00:09.0: bridge window [mem 0xfc000000-0xfc0fffff] |
| [ 1.298286] pci 0000:00:09.0: bridge window [mem 0xf8000000-0xfbffffff pref] |
| [ 1.305603] pci 0000:02:00.0: BAR 6: assigned [mem 0xfc110000-0xfc11ffff pref] |
| [ 1.312918] pci 0000:00:0b.0: PCI bridge to [bus 02] |
| [ 1.317951] pci 0000:00:0b.0: bridge window [mem 0xfc100000-0xfc1fffff] |
| [ 1.324804] pci 0000:00:0c.0: PCI bridge to [bus 03] |
| [ 1.329837] pci 0000:00:0c.0: bridge window [mem 0xfc200000-0xfc2fffff] |
| [ 1.336689] pci 0000:00:0d.0: PCI bridge to [bus 04] |
| [ 1.341725] pci 0000:00:0e.0: PCI bridge to [bus 05] |
| [ 1.346763] pci_bus 0000:00: resource 4 [io 0x0d00-0x3fff] |
| [ 1.346766] pci_bus 0000:00: resource 5 [mem 0xf8000000-0xfbffffff] |
| [ 1.346768] pci_bus 0000:00: resource 6 [mem 0xfc000000-0xfc3fffff] |
| [ 1.346770] pci_bus 0000:00: resource 7 [io 0x0000-0x0cf7] |
| [ 1.346772] pci_bus 0000:01: resource 0 [io 0x1000-0x1fff] |
| [ 1.346774] pci_bus 0000:01: resource 1 [mem 0xfc000000-0xfc0fffff] |
| [ 1.346776] pci_bus 0000:01: resource 2 [mem 0xf8000000-0xfbffffff pref] |
| [ 1.346778] pci_bus 0000:02: resource 1 [mem 0xfc100000-0xfc1fffff] |
| [ 1.346781] pci_bus 0000:03: resource 1 [mem 0xfc200000-0xfc2fffff] |
| [ 1.346925] NET: Registered protocol family 2 |
| [ 1.351852] TCP established hash table entries: 65536 (order: 7, 524288 bytes) |
| [ 1.359507] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes) |
| [ 1.366837] TCP: Hash tables configured (established 65536 bind 65536) |
| [ 1.373513] TCP: reno registered |
| [ 1.376823] UDP hash table entries: 4096 (order: 5, 131072 bytes) |
| [ 1.383079] UDP-Lite hash table entries: 4096 (order: 5, 131072 bytes) |
| [ 1.389893] NET: Registered protocol family 1 |
| [ 1.394584] ACPI: PCI Interrupt Link [LUB0] enabled at IRQ 23 |
| [ 1.400651] ACPI: PCI Interrupt Link [LUB2] enabled at IRQ 22 |
| [ 1.406578] pci 0000:00:00.0: Found enabled HT MSI Mapping |
| [ 1.412171] pci 0000:00:00.0: Found enabled HT MSI Mapping |
| [ 1.417728] pci 0000:00:0b.0: Found disabled HT MSI Mapping |
| [ 1.423375] pci 0000:00:00.0: Found enabled HT MSI Mapping |
| [ 1.430106] pci 0000:00:00.0: Found enabled HT MSI Mapping |
| [ 1.435662] pci 0000:00:0c.0: Found disabled HT MSI Mapping |
| [ 1.441307] pci 0000:00:00.0: Found enabled HT MSI Mapping |
| [ 1.446909] pci 0000:00:00.0: Found enabled HT MSI Mapping |
| [ 1.452466] pci 0000:00:0d.0: Found disabled HT MSI Mapping |
| [ 1.458101] pci 0000:00:00.0: Found enabled HT MSI Mapping |
| [ 1.463716] pci 0000:00:00.0: Found enabled HT MSI Mapping |
| [ 1.469276] pci 0000:00:0e.0: Found disabled HT MSI Mapping |
| [ 1.474923] pci 0000:00:00.0: Found enabled HT MSI Mapping |
| [ 1.480499] pci 0000:01:04.0: Video device with shadowed ROM |
| [ 1.480505] PCI: CLS 64 bytes, default 64 |
| [ 1.480582] Unpacking initramfs... |
| [ 1.670116] Freeing initrd memory: 8744K (ffff88007f775000 - ffff88007ffff000) |
| [ 1.677765] PCI-DMA: Disabling AGP. |
| [ 1.681501] PCI-DMA: aperture base @ d4000000 size 65536 KB |
| [ 1.687143] PCI-DMA: using GART IOMMU. |
| [ 1.690968] PCI-DMA: Reserving 64MB of IOMMU area in the AGP aperture |
| [ 1.703783] platform rtc_cmos: registered platform RTC device (no PNP device found) |
| [ 1.712133] microcode: CPU0: patch_level=0x00000000 |
| [ 1.717105] microcode: CPU1: patch_level=0x00000000 |
| [ 1.722067] microcode: CPU2: patch_level=0x00000000 |
| [ 1.727032] microcode: CPU3: patch_level=0x00000000 |
| [ 1.732001] microcode: CPU4: patch_level=0x00000000 |
| [ 1.736970] microcode: CPU5: patch_level=0x00000000 |
| [ 1.741937] microcode: CPU6: patch_level=0x00000000 |
| [ 1.746912] microcode: CPU7: patch_level=0x00000000 |
| [ 1.751894] microcode: CPU8: patch_level=0x00000000 |
| [ 1.756866] microcode: CPU9: patch_level=0x00000000 |
| [ 1.761849] microcode: CPU10: patch_level=0x00000000 |
| [ 1.766917] microcode: CPU11: patch_level=0x00000000 |
| [ 1.772043] microcode: Microcode Update Driver: v2.00 <tigran@aivazian.fsnet.co.uk>, Peter Oruba |
| [ 1.780962] LVT offset 1 assigned for vector 0x400 |
| [ 1.785826] IBS: LVT offset 1 assigned |
| [ 1.789676] perf: AMD IBS detected (0x0000001f) |
| [ 1.794796] futex hash table entries: 4096 (order: 6, 262144 bytes) |
| [ 1.801260] audit: initializing netlink subsys (disabled) |
| [ 1.806759] audit: type=2000 audit(1426569581.604:1): initialized |
| [ 1.813323] HugeTLB registered 2 MB page size, pre-allocated 0 pages |
| [ 1.819785] zbud: loaded |
| [ 1.822732] VFS: Disk quotas dquot_6.5.2 |
| [ 1.826754] Dquot-cache hash table entries: 512 (order 0, 4096 bytes) |
| [ 1.833350] msgmni has been set to 11961 |
| [ 1.837772] alg: No test for stdrng (krng) |
| [ 1.842010] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252) |
| [ 1.849611] io scheduler noop registered |
| [ 1.853610] io scheduler deadline registered |
| [ 1.858024] io scheduler cfq registered (default) |
| [ 1.862940] pcieport 0000:00:0b.0: irq 40 for MSI/MSI-X |
| [ 1.863040] pcieport 0000:00:0c.0: irq 41 for MSI/MSI-X |
| [ 1.863135] pcieport 0000:00:0d.0: irq 42 for MSI/MSI-X |
| [ 1.863225] pcieport 0000:00:0e.0: irq 43 for MSI/MSI-X |
| [ 1.863348] aer 0000:00:0b.0:pcie02: service driver aer loaded |
| [ 1.863370] aer 0000:00:0c.0:pcie02: service driver aer loaded |
| [ 1.863392] aer 0000:00:0d.0:pcie02: service driver aer loaded |
| [ 1.863414] aer 0000:00:0e.0:pcie02: service driver aer loaded |
| [ 1.863430] pcieport 0000:00:0b.0: Signaling PME through PCIe PME interrupt |
| [ 1.870471] pci 0000:02:00.0: Signaling PME through PCIe PME interrupt |
| [ 1.877067] pcie_pme 0000:00:0b.0:pcie01: service driver pcie_pme loaded |
| [ 1.877075] pcieport 0000:00:0c.0: Signaling PME through PCIe PME interrupt |
| [ 1.884105] pci 0000:03:00.0: Signaling PME through PCIe PME interrupt |
| [ 1.890701] pcie_pme 0000:00:0c.0:pcie01: service driver pcie_pme loaded |
| [ 1.890709] pcieport 0000:00:0d.0: Signaling PME through PCIe PME interrupt |
| [ 1.897741] pcie_pme 0000:00:0d.0:pcie01: service driver pcie_pme loaded |
| [ 1.897748] pcieport 0000:00:0e.0: Signaling PME through PCIe PME interrupt |
| [ 1.904788] pcie_pme 0000:00:0e.0:pcie01: service driver pcie_pme loaded |
| [ 1.904808] pci_hotplug: PCI Hot Plug PCI Core version: 0.5 |
| [ 1.910472] pciehp: PCI Express Hot Plug Controller Driver version: 0.4 |
| [ 1.917246] GHES: HEST is not enabled! |
| [ 1.921146] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled |
| [ 1.947767] 00:02: ttyS0 at I/O 0x3f8 (irq = 4, base_baud = 115200) is a 16550A |
| [ 1.975525] 00:03: ttyS1 at I/O 0x2f8 (irq = 3, base_baud = 115200) is a 16550A |
| [ 1.983349] Linux agpgart interface v0.103 |
| [ 1.987683] i8042: PNP: PS/2 Controller [PNP0303:KBD,PNP0f03:MOU] at 0x60,0x64 irq 1,12 |
| [ 1.997914] serio: i8042 KBD port at 0x60,0x64 irq 1 |
| [ 2.002979] serio: i8042 AUX port at 0x60,0x64 irq 12 |
| [ 2.008247] mousedev: PS/2 mouse device common for all mice |
| [ 2.014026] rtc_cmos rtc_cmos: RTC can wake from S4 |
| [ 2.019146] rtc_cmos rtc_cmos: rtc core: registered rtc_cmos as rtc0 |
| [ 2.025607] rtc_cmos rtc_cmos: alarms up to one year, y3k, 114 bytes nvram, hpet irqs |
| [ 2.033559] ledtrig-cpu: registered to indicate activity on CPUs |
| [ 2.039735] AMD IOMMUv2 driver by Joerg Roedel <joerg.roedel@amd.com> |
| [ 2.046255] AMD IOMMUv2 functionality not available on this system |
| [ 2.052613] TCP: cubic registered |
| [ 2.056131] NET: Registered protocol family 10 |
| [ 2.060998] mip6: Mobile IPv6 |
| [ 2.064040] NET: Registered protocol family 17 |
| [ 2.068556] mpls_gso: MPLS GSO support |
| [ 2.073112] registered taskstats version 1 |
| [ 2.077768] rtc_cmos rtc_cmos: setting system clock to 2015-03-17 05:19:43 UTC (1426569583) |
| [ 2.086316] PM: Hibernation image not present or could not be loaded. |
| [ 2.087575] Freeing unused kernel memory: 1204K (ffffffff818ed000 - ffffffff81a1a000) |
| [ 2.095509] Write protecting the kernel read-only data: 8192k |
| [ 2.103874] Freeing unused kernel memory: 928K (ffff880001518000 - ffff880001600000) |
| [ 2.112301] Freeing unused kernel memory: 216K (ffff8800017ca000 - ffff880001800000) |
| [ 2.128211] systemd-udevd[120]: starting version 215 |
| [ 2.133644] random: systemd-udevd urandom read with 3 bits of entropy available |
| [ 2.151711] pps_core: LinuxPPS API ver. 1 registered |
| [ 2.156754] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it> |
| [ 2.166167] ACPI: bus type USB registered |
| [ 2.170309] usbcore: registered new interface driver usbfs |
| [ 2.175905] usbcore: registered new interface driver hub |
| [ 2.175961] PTP clock support registered |
| [ 2.185369] usbcore: registered new device driver usb |
| [ 2.190741] tg3.c:v3.137 (May 11, 2014) |
| [ 2.194676] tg3 0000:02:00.0: enabling device (0004 -> 0006) |
| [ 2.200545] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver |
| [ 2.200604] ACPI: PCI Interrupt Link [LNIB] enabled at IRQ 17 |
| [ 2.213244] ehci-pci: EHCI PCI platform driver |
| [ 2.217890] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver |
| [ 2.217957] ehci-pci 0000:00:02.1: EHCI Host Controller |
| [ 2.217964] ehci-pci 0000:00:02.1: new USB bus registered, assigned bus number 1 |
| [ 2.217976] ehci-pci 0000:00:02.1: debug port 1 |
| [ 2.218021] ehci-pci 0000:00:02.1: cache line size of 64 is not supported |
| [ 2.218041] ehci-pci 0000:00:02.1: irq 22, io mem 0xfc303000 |
| [ 2.229884] ehci-pci 0000:00:02.1: USB 2.0 started, EHCI 1.00 |
| [ 2.229922] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002 |
| [ 2.229924] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 |
| [ 2.229925] usb usb1: Product: EHCI Host Controller |
| [ 2.229926] usb usb1: Manufacturer: Linux 3.16.0-4-amd64 ehci_hcd |
| [ 2.229927] usb usb1: SerialNumber: 0000:00:02.1 |
| [ 2.230143] hub 1-0:1.0: USB hub found |
| [ 2.230151] hub 1-0:1.0: 10 ports detected |
| [ 2.291353] ohci-pci: OHCI PCI platform driver |
| [ 2.296019] ohci-pci 0000:00:02.0: OHCI PCI host controller |
| [ 2.301668] ohci-pci 0000:00:02.0: new USB bus registered, assigned bus number 2 |
| [ 2.309187] ohci-pci 0000:00:02.0: irq 23, io mem 0xfc300000 |
| [ 2.327723] tg3 0000:02:00.0 eth0: Tigon3 [partno(BCM95721) rev 4201] (PCI Express) MAC address 00:1e:8c:51:61:a2 |
| [ 2.338092] tg3 0000:02:00.0 eth0: attached PHY is 5750 (10/100/1000Base-T Ethernet) (WireSpeed[1], EEE[0]) |
| [ 2.347924] tg3 0000:02:00.0 eth0: RXcsums[1] LinkChgREG[0] MIirq[0] ASF[0] TSOcap[1] |
| [ 2.355838] tg3 0000:02:00.0 eth0: dma_rwctrl[76180000] dma_mask[64-bit] |
| [ 2.362679] tg3 0000:03:00.0: enabling device (0004 -> 0006) |
| [ 2.368501] ACPI: PCI Interrupt Link [LNIA] enabled at IRQ 16 |
| [ 2.371740] usb usb2: New USB device found, idVendor=1d6b, idProduct=0001 |
| [ 2.371742] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1 |
| [ 2.371743] usb usb2: Product: OHCI PCI host controller |
| [ 2.371744] usb usb2: Manufacturer: Linux 3.16.0-4-amd64 ohci_hcd |
| [ 2.371745] usb usb2: SerialNumber: 0000:00:02.0 |
| [ 2.371881] hub 2-0:1.0: USB hub found |
| [ 2.371891] hub 2-0:1.0: 10 ports detected |
| [ 2.456774] tg3 0000:03:00.0 eth1: Tigon3 [partno(BCM95721) rev 4201] (PCI Express) MAC address 00:1e:8c:51:63:95 |
| [ 2.467124] tg3 0000:03:00.0 eth1: attached PHY is 5750 (10/100/1000Base-T Ethernet) (WireSpeed[1], EEE[0]) |
| [ 2.476964] tg3 0000:03:00.0 eth1: RXcsums[1] LinkChgREG[0] MIirq[0] ASF[0] TSOcap[1] |
| [ 2.484876] tg3 0000:03:00.0 eth1: dma_rwctrl[76180000] dma_mask[64-bit] |
| [ 2.495732] FS-Cache: Loaded |
| [ 2.501787] RPC: Registered named UNIX socket transport module. |
| [ 2.508103] RPC: Registered udp transport module. |
| [ 2.514203] RPC: Registered tcp transport module. |
| [ 2.520304] RPC: Registered tcp NFSv4.1 backchannel transport module. |
| [ 2.531045] FS-Cache: Netfs 'nfs' registered for caching |
| [ 2.542100] tg3 0000:02:00.0: irq 44 for MSI/MSI-X |
| [ 2.589512] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready |
| [ 2.701323] tsc: Refined TSC clocksource calibration: 2412.362 MHz |
| [ 3.704268] Switched to clocksource tsc |
| [ 4.178904] tg3 0000:02:00.0 eth0: Link is up at 100 Mbps, full duplex |
| [ 4.185518] tg3 0000:02:00.0 eth0: Flow control is on for TX and on for RX |
| [ 4.192488] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready |
| [ 5.054642] systemd[1]: systemd 215 running in system mode. (+PAM +AUDIT +SELINUX +IMA +SYSVINIT +LIBCRYPTSETUP +GCRYPT +ACL +XZ -SECCOMP -APPARMOR) |
| [ 5.068403] systemd[1]: Detected architecture 'x86-64'. |
| [ 5.277665] systemd[1]: Inserted module 'autofs4' |
| [ 5.283705] systemd[1]: Set hostname to <cb-test-tgt>. |
| [ 5.320581] random: nonblocking pool is initialized |
| [ 5.584218] systemd[1]: Cannot add dependency job for unit dbus.socket, ignoring: Unit dbus.socket failed to load: No such file or directory. |
| [ 5.597040] systemd[1]: Cannot add dependency job for unit display-manager.service, ignoring: Unit display-manager.service failed to load: No such file or directory. |
| [ 5.612234] systemd[1]: Expecting device dev-ttyS0.device... |
| [ 5.626061] systemd[1]: Starting Forward Password Requests to Wall Directory Watch. |
| [ 5.633917] systemd[1]: Started Forward Password Requests to Wall Directory Watch. |
| [ 5.641600] systemd[1]: Starting Remote File Systems (Pre). |
| [ 5.658001] systemd[1]: Reached target Remote File Systems (Pre). |
| [ 5.664220] systemd[1]: Starting Arbitrary Executable File Formats File System Automount Point. |
| [ 5.685978] systemd[1]: Set up automount Arbitrary Executable File Formats File System Automount Point. |
| [ 5.695490] systemd[1]: Starting Dispatch Password Requests to Console Directory Watch. |
| [ 5.703620] systemd[1]: Started Dispatch Password Requests to Console Directory Watch. |
| [ 5.711630] systemd[1]: Starting Paths. |
| [ 5.725929] systemd[1]: Reached target Paths. |
| [ 5.730377] systemd[1]: Starting Encrypted Volumes. |
| [ 5.745908] systemd[1]: Reached target Encrypted Volumes. |
| [ 5.751400] systemd[1]: Starting Swap. |
| [ 5.765877] systemd[1]: Reached target Swap. |
| [ 5.770246] systemd[1]: Starting Root Slice. |
| [ 5.789855] systemd[1]: Created slice Root Slice. |
| [ 5.794664] systemd[1]: Starting User and Session Slice. |
| [ 5.813841] systemd[1]: Created slice User and Session Slice. |
| [ 5.819690] systemd[1]: Starting Delayed Shutdown Socket. |
| [ 5.833802] systemd[1]: Listening on Delayed Shutdown Socket. |
| [ 5.839652] systemd[1]: Starting /dev/initctl Compatibility Named Pipe. |
| [ 5.857781] systemd[1]: Listening on /dev/initctl Compatibility Named Pipe. |
| [ 5.864825] systemd[1]: Starting Journal Socket (/dev/log). |
| [ 5.881757] systemd[1]: Listening on Journal Socket (/dev/log). |
| [ 5.887781] systemd[1]: Starting Syslog Socket. |
| [ 5.901726] systemd[1]: Listening on Syslog Socket. |
| [ 5.906717] systemd[1]: Starting udev Kernel Socket. |
| [ 5.921707] systemd[1]: Listening on udev Kernel Socket. |
| [ 5.927103] systemd[1]: Starting udev Control Socket. |
| [ 5.945665] systemd[1]: Listening on udev Control Socket. |
| [ 5.951152] systemd[1]: Starting Journal Socket. |
| [ 5.965652] systemd[1]: Listening on Journal Socket. |
| [ 5.970723] systemd[1]: Starting Sockets. |
| [ 5.985634] systemd[1]: Reached target Sockets. |
| [ 5.990267] systemd[1]: Starting System Slice. |
| [ 6.005607] systemd[1]: Created slice System Slice. |
| [ 6.010579] systemd[1]: Starting system-getty.slice. |
| [ 6.029598] systemd[1]: Created slice system-getty.slice. |
| [ 6.035105] systemd[1]: Starting system-serial\x2dgetty.slice. |
| [ 6.049560] systemd[1]: Created slice system-serial\x2dgetty.slice. |
| [ 6.056439] systemd[1]: Starting Create list of required static device nodes for the current kernel... |
| [ 6.081988] systemd[1]: Mounting Debug File System... |
| [ 6.110064] systemd[1]: Started Set Up Additional Binary Formats. |
| [ 6.116296] systemd[1]: Mounting Huge Pages File System... |
| [ 6.169348] systemd[1]: Starting Load Kernel Modules... |
| [ 6.185879] systemd[1]: Mounting POSIX Message Queue File System... |
| [ 6.201829] systemd[1]: Starting udev Coldplug all Devices... |
| [ 6.217825] systemd[1]: Starting Journal Service... |
| [ 6.241368] systemd[1]: Started Journal Service. |
| [ 6.703561] systemd-udevd[210]: starting version 215 |
| [ 7.154958] systemd-journald[188]: Received request to flush runtime journal from PID 1 |
| [ 7.857068] k10temp 0000:00:18.3: unreliable CPU thermal sensor; monitoring disabled |
| [ 7.864941] k10temp 0000:00:19.3: unreliable CPU thermal sensor; monitoring disabled |
| [ 7.873017] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input2 |
| [ 7.881495] ACPI: Power Button [PWRB] |
| [ 7.885317] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input3 |
| [ 7.892805] ACPI: Power Button [PWRF] |
| [ 7.896988] input: PC Speaker as /devices/platform/pcspkr/input/input4 |
| [ 7.903773] EDAC MC: Ver: 3.0.0 |
| [ 7.942511] SCSI subsystem initialized |
| [ 7.962448] MCE: In-kernel MCE decoding enabled. |
| [ 7.971238] FDC 0 is a post-1991 82077 |
| [ 7.996571] libata version 3.00 loaded. |
| [ 8.015107] AMD64 EDAC driver v3.4.0 |
| [ 8.019642] acpi-cpufreq: overriding BIOS provided _PSD data |
| [ 8.051386] w83793 0-002f: Registered watchdog chardev major 10, minor: 130 |
| [ 8.058465] i2c i2c-0: nForce2 SMBus adapter at 0x2c80 |
| [ 8.108447] kvm: Nested Virtualization enabled |
| [ 8.113020] kvm: Nested Paging enabled |
| [ 9.752213] *****RAPTOR ENGINEERING KFSN4-DRE AUTOMATED TEST BOOT SUCCESS***** |
| [ 11.291602] i2c i2c-1: nForce2 SMBus adapter at 0x2cc0 |
| [ 11.297030] EDAC amd64: DRAM ECC enabled. |
| [ 11.297037] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4 |
| [ 11.307949] EDAC amd64: F10h detected (node 0). |
| [ 11.312592] EDAC MC: DCT0 chip selects: |
| [ 11.312596] EDAC amd64: MC: 0: 1024MB 1: 1024MB |
| [ 11.317376] EDAC amd64: MC: 2: 1024MB 3: 1024MB |
| [ 11.322170] EDAC amd64: MC: 4: 1024MB 5: 1024MB |
| [ 11.326944] EDAC amd64: MC: 6: 0MB 7: 0MB |
| [ 11.331721] EDAC MC: DCT1 chip selects: |
| [ 11.331729] EDAC amd64: MC: 0: 0MB 1: 0MB |
| [ 11.336508] EDAC amd64: MC: 2: 0MB 3: 0MB |
| [ 11.341294] EDAC amd64: MC: 4: 0MB 5: 0MB |
| [ 11.346078] EDAC amd64: MC: 6: 0MB 7: 0MB |
| [ 11.350859] EDAC amd64: using x4 syndromes. |
| [ 11.355125] EDAC amd64: MCT channel count: 1 |
| [ 11.359554] EDAC amd64: CS0: Registered DDR2 RAM |
| [ 11.364290] EDAC amd64: CS1: Registered DDR2 RAM |
| [ 11.369011] EDAC amd64: CS2: Registered DDR2 RAM |
| [ 11.373716] EDAC amd64: CS3: Registered DDR2 RAM |
| [ 11.378431] EDAC amd64: CS4: Registered DDR2 RAM |
| [ 11.383136] EDAC amd64: CS5: Registered DDR2 RAM |
| [ 11.388452] EDAC MC0: Giving out device to module amd64_edac controller F10h: DEV 0000:00:18.2 (INTERRUPT) |
| [ 11.398259] EDAC amd64: DRAM ECC disabled. |
| [ 11.402460] EDAC amd64: ECC disabled in the BIOS or no ECC capability, module will not load. |
| Either enable ECC checking or force module loading by setting 'ecc_enable_override'. |
| (Note that use of the override may cause unknown side effects.) |
| [ 11.427090] pata_amd 0000:00:06.0: version 0.4.1 |
| [ 11.427103] EDAC PCI0: Giving out device to module amd64_edac controller EDAC PCI controller: DEV 0000:00:18.2 (POLLED) |
| [ 11.427953] scsi0 : pata_amd |
| [ 11.441215] scsi1 : pata_amd |
| [ 11.444243] ata1: PATA max UDMA/133 cmd 0x1f0 ctl 0x3f6 bmdma 0x3020 irq 14 |
| [ 11.451294] ata2: PATA max UDMA/133 cmd 0x170 ctl 0x376 bmdma 0x3028 irq 15 |
| [ 11.458403] sata_nv 0000:00:07.0: version 3.5 |
| [ 11.458811] ACPI: PCI Interrupt Link [LSA0] enabled at IRQ 21 |
| [ 11.465352] scsi2 : sata_nv |
| [ 11.468455] scsi3 : sata_nv |
| [ 11.471414] ata3: SATA max UDMA/133 cmd 0x3050 ctl 0x3070 bmdma 0x3030 irq 21 |
| [ 11.478642] ata4: SATA max UDMA/133 cmd 0x3058 ctl 0x3074 bmdma 0x3038 irq 21 |
| [ 11.486077] ACPI: PCI Interrupt Link [LSA1] enabled at IRQ 20 |
| [ 11.492239] scsi4 : sata_nv |
| [ 11.495215] scsi5 : sata_nv |
| [ 11.498132] ata5: SATA max UDMA/133 cmd 0x3060 ctl 0x3078 bmdma 0x3040 irq 20 |
| [ 11.505350] ata6: SATA max UDMA/133 cmd 0x3068 ctl 0x307c bmdma 0x3048 irq 20 |
| [ 11.795029] ata3: SATA link down (SStatus 0 SControl 300) |
| [ 11.822997] ata5: SATA link down (SStatus 0 SControl 300) |
| [ 12.110677] ata4: SATA link down (SStatus 0 SControl 300) |
| [ 12.426320] ata6: SATA link down (SStatus 0 SControl 300) |