| [ 0.000000] Linux version 5.3.13-gnu-1 (linux-libre@parabola) (gcc version 9.2.0 (GCC)) #1 SMP PREEMPT Mon, 25 Nov 2019 01:20:59 +0000 |
| [ 0.000000] Command line: BOOT_IMAGE=/vmlinuz-linux-libre root=/dev/mapper/F2A85M_PRO-rootfs rw rw cryptkey=rootfs:/etc/keys/internal.key cryptdevice=/dev/mapper/external-encrypted:external-cleartext loglevel=8 console=ttyS2,115200 console=ttyACM1 console=tty0 root=/dev/mapper/F2A85M_PRO-rootfs nopat iomem=relaxed panic=1 |
| [ 0.000000] KERNEL supported cpus: |
| [ 0.000000] Intel GenuineIntel |
| [ 0.000000] AMD AuthenticAMD |
| [ 0.000000] Hygon HygonGenuine |
| [ 0.000000] Centaur CentaurHauls |
| [ 0.000000] zhaoxin Shanghai |
| [ 0.000000] random: get_random_u32 called from bsp_init_amd+0x278/0x330 with crng_init=0 |
| [ 0.000000] x86/fpu: Supporting XSAVE feature 0x001: 'x87 floating point registers' |
| [ 0.000000] x86/fpu: Supporting XSAVE feature 0x002: 'SSE registers' |
| [ 0.000000] x86/fpu: Supporting XSAVE feature 0x004: 'AVX registers' |
| [ 0.000000] x86/fpu: xstate_offset[2]: 576, xstate_sizes[2]: 256 |
| [ 0.000000] x86/fpu: Enabled xstate features 0x7, context size is 832 bytes, using 'standard' format. |
| [ 0.000000] BIOS-provided physical RAM map: |
| [ 0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009fbff] usable |
| [ 0.000000] BIOS-e820: [mem 0x000000000009fc00-0x000000000009ffff] reserved |
| [ 0.000000] BIOS-e820: [mem 0x00000000000f0000-0x00000000000fffff] reserved |
| [ 0.000000] BIOS-e820: [mem 0x0000000000100000-0x00000000dfd28fff] usable |
| [ 0.000000] BIOS-e820: [mem 0x00000000dfd29000-0x00000000dfffffff] reserved |
| [ 0.000000] BIOS-e820: [mem 0x00000000f8000000-0x00000000fbffffff] reserved |
| [ 0.000000] BIOS-e820: [mem 0x0000000100000000-0x000000021effffff] usable |
| [ 0.000000] x86/PAT: PAT support disabled. |
| [ 0.000000] NX (Execute Disable) protection: active |
| [ 0.000000] SMBIOS 2.8 present. |
| [ 0.000000] DMI: ASUS F2A85-M_PRO/F2A85-M_PRO, BIOS 4.10-942-ga89c82e4021 10/08/2019 |
| [ 0.000000] tsc: Fast TSC calibration using PIT |
| [ 0.000000] tsc: Detected 3200.162 MHz processor |
| [ 0.003153] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved |
| [ 0.003155] e820: remove [mem 0x000a0000-0x000fffff] usable |
| [ 0.003159] last_pfn = 0x21f000 max_arch_pfn = 0x400000000 |
| [ 0.003164] MTRR default type: uncachable |
| [ 0.003166] MTRR fixed ranges enabled: |
| [ 0.003168] 00000-9FFFF write-back |
| [ 0.003170] A0000-BFFFF uncachable |
| [ 0.003171] C0000-FFFFF write-back |
| [ 0.003172] MTRR variable ranges enabled: |
| [ 0.003174] 0 base 0000FFC00000 mask FFFFFFC00000 write-protect |
| [ 0.003176] 1 base 0000C0000000 mask FFFFE0000000 write-back |
| [ 0.003178] 2 base 000080000000 mask FFFFC0000000 write-back |
| [ 0.003180] 3 base 000000000000 mask FFFF80000000 write-back |
| [ 0.003181] 4 disabled |
| [ 0.003182] 5 disabled |
| [ 0.003183] 6 disabled |
| [ 0.003184] 7 disabled |
| [ 0.003185] TOM2: 000000021f000000 aka 8688M |
| [ 0.003433] x86/PAT: Configuration [0-7]: WB WT UC- UC WB WT UC- UC |
| [ 0.003440] last_pfn = 0xdfd29 max_arch_pfn = 0x400000000 |
| [ 0.006231] found SMP MP-table at [mem 0x000f59c0-0x000f59cf] |
| [ 0.006328] check: Scanning 1 areas for low memory corruption |
| [ 0.006334] Using GB pages for direct mapping |
| [ 0.006337] BRK [0x202801000, 0x202801fff] PGTABLE |
| [ 0.006340] BRK [0x202802000, 0x202802fff] PGTABLE |
| [ 0.006342] BRK [0x202803000, 0x202803fff] PGTABLE |
| [ 0.006368] BRK [0x202804000, 0x202804fff] PGTABLE |
| [ 0.006370] BRK [0x202805000, 0x202805fff] PGTABLE |
| [ 0.006484] BRK [0x202806000, 0x202806fff] PGTABLE |
| [ 0.006516] BRK [0x202807000, 0x202807fff] PGTABLE |
| [ 0.006562] RAMDISK: [mem 0x36495000-0x37241fff] |
| [ 0.006568] ACPI: Early table checksum verification disabled |
| [ 0.006573] ACPI: RSDP 0x00000000000F5BD0 000024 (v02 COREv4) |
| [ 0.006577] ACPI: XSDT 0x00000000DFD2F0E0 000064 (v01 COREv4 COREBOOT 00000000 CORE 20190703) |
| [ 0.006584] ACPI: FACP 0x00000000DFD30B50 0000F4 (v04 COREv4 COREBOOT 00000000 CORE 20190703) |
| [ 0.006591] ACPI: DSDT 0x00000000DFD2F280 0018C1 (v02 COREv4 COREBOOT 00010001 INTL 20190703) |
| [ 0.006596] ACPI: FACS 0x00000000DFD2F240 000040 |
| [ 0.006599] ACPI: FACS 0x00000000DFD2F240 000040 |
| [ 0.006603] ACPI: SSDT 0x00000000DFD30C50 00008A (v02 COREv4 COREBOOT 0000002A CORE 20190703) |
| [ 0.006607] ACPI: APIC 0x00000000DFD30CE0 000072 (v02 COREv4 COREBOOT 00000000 CORE 20190703) |
| [ 0.006611] ACPI: HPET 0x00000000DFD30D60 000038 (v01 COREv4 COREBOOT 00000000 CORE 20190703) |
| [ 0.006616] ACPI: HEST 0x00000000DFD30DA0 0001D0 (v01 COREv4 COREBOOT 00000000 CORE 20190703) |
| [ 0.006620] ACPI: IVRS 0x00000000DFD30F70 000070 (v02 AMD AMDIOMMU 00000001 AMD 00000000) |
| [ 0.006625] ACPI: SSDT 0x00000000DFD30FE0 00051F (v02 AMD ALIB 00000001 MSFT 04000000) |
| [ 0.006629] ACPI: SSDT 0x00000000DFD31500 000D40 (v01 AMD POWERNOW 00000001 AMD 00000001) |
| [ 0.006638] ACPI: Local APIC address 0xfee00000 |
| [ 0.006764] No NUMA configuration found |
| [ 0.006766] Faking a node at [mem 0x0000000000000000-0x000000021effffff] |
| [ 0.006770] NODE_DATA(0) allocated [mem 0x21effc000-0x21effffff] |
| [ 0.006799] Zone ranges: |
| [ 0.006800] DMA [mem 0x0000000000001000-0x0000000000ffffff] |
| [ 0.006802] DMA32 [mem 0x0000000001000000-0x00000000ffffffff] |
| [ 0.006804] Normal [mem 0x0000000100000000-0x000000021effffff] |
| [ 0.006805] Device empty |
| [ 0.006806] Movable zone start for each node |
| [ 0.006807] Early memory node ranges |
| [ 0.006809] node 0: [mem 0x0000000000001000-0x000000000009efff] |
| [ 0.006810] node 0: [mem 0x0000000000100000-0x00000000dfd28fff] |
| [ 0.006812] node 0: [mem 0x0000000100000000-0x000000021effffff] |
| [ 0.006824] Zeroed struct page in unavailable ranges: 825 pages |
| [ 0.006825] Initmem setup node 0 [mem 0x0000000000001000-0x000000021effffff] |
| [ 0.006828] On node 0 totalpages: 2092231 |
| [ 0.006829] DMA zone: 64 pages used for memmap |
| [ 0.006830] DMA zone: 21 pages reserved |
| [ 0.006832] DMA zone: 3998 pages, LIFO batch:0 |
| [ 0.006886] DMA32 zone: 14261 pages used for memmap |
| [ 0.006887] DMA32 zone: 912681 pages, LIFO batch:63 |
| [ 0.020636] Normal zone: 18368 pages used for memmap |
| [ 0.020638] Normal zone: 1175552 pages, LIFO batch:63 |
| [ 0.038059] ACPI: PM-Timer IO Port: 0x818 |
| [ 0.038062] ACPI: Local APIC address 0xfee00000 |
| [ 0.038069] ACPI: LAPIC_NMI (acpi_id[0xff] high edge lint[0x1]) |
| [ 0.038078] IOAPIC[0]: apic_id 4, version 33, address 0xfec00000, GSI 0-23 |
| [ 0.038082] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) |
| [ 0.038084] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 low level) |
| [ 0.038086] ACPI: IRQ0 used by override. |
| [ 0.038088] ACPI: IRQ9 used by override. |
| [ 0.038090] Using ACPI (MADT) for SMP configuration information |
| [ 0.038093] ACPI: HPET id: 0x10228210 base: 0xfed00000 |
| [ 0.038098] smpboot: Allowing 4 CPUs, 0 hotplug CPUs |
| [ 0.038110] PM: Registered nosave memory: [mem 0x00000000-0x00000fff] |
| [ 0.038113] PM: Registered nosave memory: [mem 0x0009f000-0x0009ffff] |
| [ 0.038114] PM: Registered nosave memory: [mem 0x000a0000-0x000effff] |
| [ 0.038115] PM: Registered nosave memory: [mem 0x000f0000-0x000fffff] |
| [ 0.038117] PM: Registered nosave memory: [mem 0xdfd29000-0xdfffffff] |
| [ 0.038118] PM: Registered nosave memory: [mem 0xe0000000-0xf7ffffff] |
| [ 0.038119] PM: Registered nosave memory: [mem 0xf8000000-0xfbffffff] |
| [ 0.038120] PM: Registered nosave memory: [mem 0xfc000000-0xffffffff] |
| [ 0.038123] [mem 0xe0000000-0xf7ffffff] available for PCI devices |
| [ 0.038124] Booting paravirtualized kernel on bare hardware |
| [ 0.038127] clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 6370452778343963 ns |
| [ 0.158935] setup_percpu: NR_CPUS:320 nr_cpumask_bits:320 nr_cpu_ids:4 nr_node_ids:1 |
| [ 0.159450] percpu: Embedded 54 pages/cpu s184320 r8192 d28672 u524288 |
| [ 0.159457] pcpu-alloc: s184320 r8192 d28672 u524288 alloc=1*2097152 |
| [ 0.159458] pcpu-alloc: [0] 0 1 2 3 |
| [ 0.159481] Built 1 zonelists, mobility grouping on. Total pages: 2059517 |
| [ 0.159483] Policy zone: Normal |
| [ 0.159485] Kernel command line: BOOT_IMAGE=/vmlinuz-linux-libre root=/dev/mapper/F2A85M_PRO-rootfs rw rw cryptkey=rootfs:/etc/keys/internal.key cryptdevice=/dev/mapper/external-encrypted:external-cleartext loglevel=8 console=ttyS2,115200 console=ttyACM1 console=tty0 root=/dev/mapper/F2A85M_PRO-rootfs nopat iomem=relaxed panic=1 |
| [ 0.161150] Dentry cache hash table entries: 1048576 (order: 11, 8388608 bytes, linear) |
| [ 0.161921] Inode-cache hash table entries: 524288 (order: 10, 4194304 bytes, linear) |
| [ 0.161948] mem auto-init: stack:byref_all, heap alloc:on, heap free:off |
| [ 0.174249] Calgary: detecting Calgary via BIOS EBDA area |
| [ 0.174251] Calgary: Unable to locate Rio Grande table in EBDA - bailing! |
| [ 0.207566] Memory: 8115860K/8368924K available (12291K kernel code, 1318K rwdata, 3912K rodata, 1628K init, 3564K bss, 253064K reserved, 0K cma-reserved) |
| [ 0.207741] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1 |
| [ 0.207758] ftrace: allocating 37717 entries in 148 pages |
| [ 0.226477] rcu: Preemptible hierarchical RCU implementation. |
| [ 0.226480] rcu: RCU dyntick-idle grace-period acceleration is enabled. |
| [ 0.226481] rcu: RCU restricting CPUs from NR_CPUS=320 to nr_cpu_ids=4. |
| [ 0.226483] rcu: RCU priority boosting: priority 1 delay 500 ms. |
| [ 0.226484] Tasks RCU enabled. |
| [ 0.226485] rcu: RCU calculated value of scheduler-enlistment delay is 30 jiffies. |
| [ 0.226487] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=4 |
| [ 0.228742] NR_IRQS: 20736, nr_irqs: 456, preallocated irqs: 16 |
| [ 0.229088] spurious 8259A interrupt: IRQ7. |
| [ 0.235084] Console: colour VGA+ 80x25 |
| [ 0.258627] printk: console [tty0] enabled |
| [ 0.312953] printk: console [ttyS2] enabled |
| [ 0.313252] ACPI: Core revision 20190703 |
| [ 0.313599] clocksource: hpet: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 133484873504 ns |
| [ 0.314154] APIC: Switch to symmetric I/O mode setup |
| [ 0.349771] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1 |
| [ 0.364157] clocksource: tsc-early: mask: 0xffffffffffffffff max_cycles: 0x2e20e2f0a2f, max_idle_ns: 440795312768 ns |
| [ 0.364751] Calibrating delay loop (skipped), value calculated using timer frequency.. 6402.00 BogoMIPS (lpj=10667206) |
| [ 0.365346] pid_max: default: 32768 minimum: 301 |
| [ 0.365691] LSM: Security Framework initializing |
| [ 0.365993] Yama: becoming mindful. |
| [ 0.366302] Mount-cache hash table entries: 16384 (order: 5, 131072 bytes, linear) |
| [ 0.366818] Mountpoint-cache hash table entries: 16384 (order: 5, 131072 bytes, linear) |
| [ 0.368104] *** VALIDATE proc *** |
| [ 0.368424] *** VALIDATE cgroup1 *** |
| [ 0.368686] *** VALIDATE cgroup2 *** |
| [ 0.369006] Last level iTLB entries: 4KB 512, 2MB 1024, 4MB 512 |
| [ 0.369349] Last level dTLB entries: 4KB 1024, 2MB 1024, 4MB 512, 1GB 0 |
| [ 0.369715] Spectre V1 : Mitigation: usercopy/swapgs barriers and __user pointer sanitization |
| [ 0.370236] Spectre V2 : Mitigation: Full AMD retpoline |
| [ 0.370553] Spectre V2 : Spectre v2 / SpectreRSB mitigation: Filling RSB on context switch |
| [ 0.371064] Spectre V2 : mitigation: Enabling conditional Indirect Branch Prediction Barrier |
| [ 0.371417] Spectre V2 : User space: Vulnerable |
| [ 0.371713] Speculative Store Bypass: Mitigation: Speculative Store Bypass disabled via prctl and seccomp |
| [ 0.374191] Freeing SMP alternatives memory: 32K |
| [ 0.482472] smpboot: CPU0: AMD Athlon(tm) X4 740 Quad Core Processor (family: 0x15, model: 0x10, stepping: 0x1) |
| [ 0.501447] Performance Events: Fam15h core perfctr, AMD PMU driver. |
| [ 0.501816] ... version: 0 |
| [ 0.502095] ... bit width: 48 |
| [ 0.502376] ... generic registers: 6 |
| [ 0.502653] ... value mask: 0000ffffffffffff |
| [ 0.502970] ... max period: 00007fffffffffff |
| [ 0.503293] ... fixed-purpose events: 0 |
| [ 0.503569] ... event mask: 000000000000003f |
| [ 0.508108] rcu: Hierarchical SRCU implementation. |
| [ 0.531464] NMI watchdog: Enabled. Permanently consumes one hw-PMU counter. |
| [ 0.538116] smp: Bringing up secondary CPUs ... |
| [ 0.578136] x86: Booting SMP configuration: |
| [ 0.578421] .... node #0, CPUs: #1 |
| [ 0.119045] do_IRQ: 1.55 No irq handler for vector |
| [ 0.618123] #2 |
| [ 0.119045] do_IRQ: 2.55 No irq handler for vector |
| [ 0.658123] #3 |
| [ 0.119045] do_IRQ: 3.55 No irq handler for vector |
| [ 0.660248] smp: Brought up 1 node, 4 CPUs |
| [ 0.660248] smpboot: Max logical packages: 1 |
| [ 0.661430] smpboot: Total of 4 processors activated (25611.01 BogoMIPS) |
| [ 0.662787] devtmpfs: initialized |
| [ 0.662787] x86/mm: Memory block size: 128MB |
| [ 0.664853] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 6370867519511994 ns |
| [ 0.665317] futex hash table entries: 1024 (order: 4, 65536 bytes, linear) |
| [ 0.665765] pinctrl core: initialized pinctrl subsystem |
| [ 0.666182] PM: RTC time: 17:55:29, date: 2019-12-09 |
| [ 0.666691] NET: Registered protocol family 16 |
| [ 0.667089] audit: initializing netlink subsys (disabled) |
| [ 0.667430] audit: type=2000 audit(1575914129.319:1): state=initialized audit_enabled=0 res=1 |
| [ 0.668116] cpuidle: using governor ladder |
| [ 0.668368] cpuidle: using governor menu |
| [ 0.668400] ACPI: bus type PCI registered |
| [ 0.668433] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5 |
| [ 0.668866] PCI: Using configuration type 1 for base access |
| [ 0.669191] PCI: Using configuration type 1 for extended access |
| [ 0.669988] mtrr: your CPUs had inconsistent variable MTRR settings |
| [ 0.671417] mtrr: probably your BIOS does not setup all CPUs. |
| [ 0.671748] mtrr: corrected configuration. |
| [ 0.673232] HugeTLB registered 1.00 GiB page size, pre-allocated 0 pages |
| [ 0.673232] HugeTLB registered 2.00 MiB page size, pre-allocated 0 pages |
| [ 0.678237] ACPI: Added _OSI(Module Device) |
| [ 0.678520] ACPI: Added _OSI(Processor Device) |
| [ 0.678806] ACPI: Added _OSI(3.0 _SCP Extensions) |
| [ 0.679111] ACPI: Added _OSI(Processor Aggregator Device) |
| [ 0.679431] ACPI: Added _OSI(Linux-Dell-Video) |
| [ 0.679716] ACPI: Added _OSI(Linux-Lenovo-NV-HDMI-Audio) |
| [ 0.680038] ACPI: Added _OSI(Linux-HPI-Hybrid-Graphics) |
| [ 0.683979] ACPI: 4 ACPI AML tables successfully acquired and loaded |
| [ 0.685307] ACPI: Interpreter enabled |
| [ 0.685596] ACPI: (supports S0 S1 S3 S4 S5) |
| [ 0.685881] ACPI: Using IOAPIC for interrupt routing |
| [ 0.686206] HEST: Table parsing has been initialized. |
| [ 0.686521] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug |
| [ 0.687202] ACPI: Enabled 8 GPEs in block 00 to 1F |
| [ 0.687893] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff]) |
| [ 0.688090] acpi PNP0A03:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI HPX-Type3] |
| [ 0.688695] acpi PNP0A03:00: _OSC: OS now controls [PCIeHotplug SHPCHotplug PME AER PCIeCapability LTR] |
| [ 0.689309] acpi PNP0A03:00: host bridge window expanded to [io 0x0000-0x0cf7 window]; [io 0x03b0-0x03df window] ignored |
| [ 0.690165] PCI host bridge to bus 0000:00 |
| [ 0.690447] pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7 window] |
| [ 0.690822] pci_bus 0000:00: root bus resource [io 0x0d00-0xffff window] |
| [ 0.691418] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff] |
| [ 0.691796] pci_bus 0000:00: root bus resource [mem 0x000c0000-0x000dffff] |
| [ 0.692173] pci_bus 0000:00: root bus resource [mem 0xe0000000-0xffffffff] |
| [ 0.692550] pci_bus 0000:00: root bus resource [bus 00-ff] |
| [ 0.692890] pci 0000:00:00.0: [1022:1410] type 00 class 0x060000 |
| [ 0.693354] pci 0000:00:00.2: [1022:1419] type 00 class 0x080600 |
| [ 0.693819] pci 0000:00:02.0: [1022:1412] type 01 class 0x060400 |
| [ 0.694190] pci 0000:00:02.0: enabling Extended Tags |
| [ 0.694529] pci 0000:00:02.0: PME# supported from D0 D3hot D3cold |
| [ 0.694876] pci 0000:00:11.0: [1022:7801] type 00 class 0x010601 |
| [ 0.695240] pci 0000:00:11.0: reg 0x10: [io 0x2010-0x2017] |
| [ 0.695580] pci 0000:00:11.0: reg 0x14: [io 0x2020-0x2023] |
| [ 0.695919] pci 0000:00:11.0: reg 0x18: [io 0x2018-0x201f] |
| [ 0.696258] pci 0000:00:11.0: reg 0x1c: [io 0x2024-0x2027] |
| [ 0.696596] pci 0000:00:11.0: reg 0x20: [io 0x2000-0x200f] |
| [ 0.696935] pci 0000:00:11.0: reg 0x24: [mem 0xf3288000-0xf32887ff] |
| [ 0.697403] pci 0000:00:12.0: [1022:7807] type 00 class 0x0c0310 |
| [ 0.697765] pci 0000:00:12.0: reg 0x10: [mem 0xf3284000-0xf3284fff] |
| [ 0.698221] pci 0000:00:12.2: [1022:7808] type 00 class 0x0c0320 |
| [ 0.698584] pci 0000:00:12.2: reg 0x10: [mem 0xf3289000-0xf32890ff] |
| [ 0.699004] pci 0000:00:12.2: supports D1 D2 |
| [ 0.699293] pci 0000:00:12.2: PME# supported from D0 D1 D2 D3hot |
| [ 0.699738] pci 0000:00:13.0: [1022:7807] type 00 class 0x0c0310 |
| [ 0.700098] pci 0000:00:13.0: reg 0x10: [mem 0xf3285000-0xf3285fff] |
| [ 0.700590] pci 0000:00:13.2: [1022:7808] type 00 class 0x0c0320 |
| [ 0.700954] pci 0000:00:13.2: reg 0x10: [mem 0xf328a000-0xf328a0ff] |
| [ 0.701481] pci 0000:00:13.2: supports D1 D2 |
| [ 0.701774] pci 0000:00:13.2: PME# supported from D0 D1 D2 D3hot |
| [ 0.702230] pci 0000:00:14.0: [1022:780b] type 00 class 0x0c0500 |
| [ 0.702717] pci 0000:00:14.2: [1022:780d] type 00 class 0x040300 |
| [ 0.703084] pci 0000:00:14.2: reg 0x10: [mem 0xf3280000-0xf3283fff 64bit] |
| [ 0.703512] pci 0000:00:14.2: PME# supported from D0 D3hot D3cold |
| [ 0.703950] pci 0000:00:14.3: [1022:780e] type 00 class 0x060100 |
| [ 0.704439] pci 0000:00:14.4: [1022:780f] type 01 class 0x060401 |
| [ 0.704865] pci 0000:00:14.5: [1022:7809] type 00 class 0x0c0310 |
| [ 0.705227] pci 0000:00:14.5: reg 0x10: [mem 0xf3286000-0xf3286fff] |
| [ 0.705720] pci 0000:00:15.0: [1022:43a0] type 01 class 0x060400 |
| [ 0.706100] pci 0000:00:15.0: enabling Extended Tags |
| [ 0.706451] pci 0000:00:15.0: supports D1 D2 |
| [ 0.706843] pci 0000:00:15.1: [1022:43a1] type 01 class 0x060400 |
| [ 0.707226] pci 0000:00:15.1: enabling Extended Tags |
| [ 0.707577] pci 0000:00:15.1: supports D1 D2 |
| [ 0.708156] pci 0000:00:16.0: [1022:7807] type 00 class 0x0c0310 |
| [ 0.708517] pci 0000:00:16.0: reg 0x10: [mem 0xf3287000-0xf3287fff] |
| [ 0.709018] pci 0000:00:16.2: [1022:7808] type 00 class 0x0c0320 |
| [ 0.709382] pci 0000:00:16.2: reg 0x10: [mem 0xf328b000-0xf328b0ff] |
| [ 0.709804] pci 0000:00:16.2: supports D1 D2 |
| [ 0.710093] pci 0000:00:16.2: PME# supported from D0 D1 D2 D3hot |
| [ 0.710537] pci 0000:00:18.0: [1022:1400] type 00 class 0x060000 |
| [ 0.710976] pci 0000:00:18.1: [1022:1401] type 00 class 0x060000 |
| [ 0.711411] pci 0000:00:18.2: [1022:1402] type 00 class 0x060000 |
| [ 0.711506] pci 0000:00:18.3: [1022:1403] type 00 class 0x060000 |
| [ 0.711948] pci 0000:00:18.4: [1022:1404] type 00 class 0x060000 |
| [ 0.712383] pci 0000:00:18.5: [1022:1405] type 00 class 0x060000 |
| [ 0.712865] pci 0000:01:00.0: [10de:104a] type 00 class 0x030000 |
| [ 0.713231] pci 0000:01:00.0: reg 0x10: [mem 0xf2000000-0xf2ffffff] |
| [ 0.713595] pci 0000:01:00.0: reg 0x14: [mem 0xe8000000-0xefffffff 64bit pref] |
| [ 0.714083] pci 0000:01:00.0: reg 0x1c: [mem 0xf0000000-0xf1ffffff 64bit pref] |
| [ 0.714756] pci 0000:01:00.0: reg 0x24: [io 0x1000-0x107f] |
| [ 0.715095] pci 0000:01:00.0: reg 0x30: [mem 0xf3000000-0xf307ffff pref] |
| [ 0.715474] pci 0000:01:00.0: enabling Extended Tags |
| [ 0.715902] pci 0000:01:00.1: [10de:0e08] type 00 class 0x040300 |
| [ 0.716264] pci 0000:01:00.1: reg 0x10: [mem 0xf3080000-0xf3083fff] |
| [ 0.716657] pci 0000:01:00.1: enabling Extended Tags |
| [ 0.717060] pci 0000:00:02.0: ASPM: current common clock configuration is broken, reconfiguring |
| [ 0.728133] pci 0000:00:02.0: PCI bridge to [bus 01] |
| [ 0.728454] pci 0000:00:02.0: bridge window [io 0x1000-0x1fff] |
| [ 0.728806] pci 0000:00:02.0: bridge window [mem 0xf2000000-0xf30fffff] |
| [ 0.729183] pci 0000:00:02.0: bridge window [mem 0xe8000000-0xf1ffffff 64bit pref] |
| [ 0.729695] pci_bus 0000:02: extended config space not accessible |
| [ 0.730122] pci 0000:00:14.4: PCI bridge to [bus 02] (subtractive decode) |
| [ 0.730504] pci 0000:00:14.4: bridge window [io 0x0000-0x0cf7 window] (subtractive decode) |
| [ 0.731028] pci 0000:00:14.4: bridge window [io 0x0d00-0xffff window] (subtractive decode) |
| [ 0.731419] pci 0000:00:14.4: bridge window [mem 0x000a0000-0x000bffff] (subtractive decode) |
| [ 0.731947] pci 0000:00:14.4: bridge window [mem 0x000c0000-0x000dffff] (subtractive decode) |
| [ 0.732474] pci 0000:00:14.4: bridge window [mem 0xe0000000-0xffffffff] (subtractive decode) |
| [ 0.733049] pci 0000:00:15.0: PCI bridge to [bus 03] |
| [ 0.733434] pci 0000:04:00.0: [1b21:1042] type 00 class 0x0c0330 |
| [ 0.733828] pci 0000:04:00.0: reg 0x10: [mem 0xf3100000-0xf3107fff 64bit] |
| [ 0.734390] pci 0000:04:00.0: PME# supported from D3hot D3cold |
| [ 0.734793] pci 0000:04:00.0: 2.000 Gb/s available PCIe bandwidth, limited by 2.5 GT/s x1 link at 0000:00:15.1 (capable of 4.000 Gb/s with 5 GT/s x1 link) |
| [ 0.748135] pci 0000:00:15.1: PCI bridge to [bus 04] |
| [ 0.748459] pci 0000:00:15.1: bridge window [mem 0xf3100000-0xf31fffff] |
| [ 0.749166] ACPI: PCI Interrupt Link [INTA] (IRQs 3 4 5 7 10 11 12 15) *0 |
| [ 0.749604] ACPI: PCI Interrupt Link [INTB] (IRQs 3 4 5 7 10 11 12 15) *0 |
| [ 0.750039] ACPI: PCI Interrupt Link [INTC] (IRQs 3 4 5 7 10 11 12 15) *0 |
| [ 0.750474] ACPI: PCI Interrupt Link [INTD] (IRQs 3 4 5 7 10 11 12 15) *0 |
| [ 0.750908] ACPI: PCI Interrupt Link [INTE] (IRQs 3 4 5 7 10 11 12 15) *0 |
| [ 0.751342] ACPI: PCI Interrupt Link [INTF] (IRQs 9) *0 |
| [ 0.751477] ACPI: PCI Interrupt Link [INTG] (IRQs 3 4 5 7 10 11 12 15) *0 |
| [ 0.751909] ACPI: PCI Interrupt Link [INTH] (IRQs 3 4 5 7 10 11 12 15) *0 |
| [ 0.754763] pci 0000:01:00.0: vgaarb: setting as boot VGA device |
| [ 0.755112] pci 0000:01:00.0: vgaarb: VGA device added: decodes=io+mem,owns=io+mem,locks=none |
| [ 0.755637] pci 0000:01:00.0: vgaarb: bridge control possible |
| [ 0.755976] vgaarb: loaded |
| [ 0.756413] ACPI: bus type USB registered |
| [ 0.756692] usbcore: registered new interface driver usbfs |
| [ 0.756692] usbcore: registered new interface driver hub |
| [ 0.758084] usbcore: registered new device driver usb |
| [ 0.758084] pps_core: LinuxPPS API ver. 1 registered |
| [ 0.758084] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it> |
| [ 0.758085] PTP clock support registered |
| [ 0.758366] EDAC MC: Ver: 3.0.0 |
| [ 0.761470] PCI: Using ACPI for IRQ routing |
| [ 0.761753] PCI: pci_cache_line_size set to 64 bytes |
| [ 0.762112] e820: reserve RAM buffer [mem 0x0009fc00-0x0009ffff] |
| [ 0.762453] e820: reserve RAM buffer [mem 0xdfd29000-0xdfffffff] |
| [ 0.762792] e820: reserve RAM buffer [mem 0x21f000000-0x21fffffff] |
| [ 0.763267] NetLabel: Initializing |
| [ 0.763518] NetLabel: domain hash size = 128 |
| [ 0.763801] NetLabel: protocols = UNLABELED CIPSOv4 CALIPSO |
| [ 0.764148] NetLabel: unlabeled traffic allowed by default |
| [ 0.764828] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0 |
| [ 0.765137] hpet0: 3 comparators, 32-bit 14.318180 MHz counter |
| [ 0.767476] clocksource: Switched to clocksource tsc-early |
| [ 0.781595] VFS: Disk quotas dquot_6.6.0 |
| [ 0.781885] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes) |
| [ 0.782284] *** VALIDATE hugetlbfs *** |
| [ 0.782610] pnp: PnP ACPI init |
| [ 0.783051] system 00:00: [mem 0xfec10002-0xfec11001] has been reserved |
| [ 0.783418] system 00:00: Plug and Play ACPI device, IDs PNP0c02 (active) |
| [ 0.783814] pnp 00:01: Plug and Play ACPI device, IDs PNP0b00 (active) |
| [ 0.784337] pnp: PnP ACPI: found 2 devices |
| [ 0.786624] thermal_sys: Registered thermal governor 'fair_share' |
| [ 0.786625] thermal_sys: Registered thermal governor 'bang_bang' |
| [ 0.786975] thermal_sys: Registered thermal governor 'step_wise' |
| [ 0.787314] thermal_sys: Registered thermal governor 'user_space' |
| [ 0.787658] thermal_sys: Registered thermal governor 'power_allocator' |
| [ 0.792536] clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns |
| [ 0.793457] pci 0000:00:02.0: PCI bridge to [bus 01] |
| [ 0.793765] pci 0000:00:02.0: bridge window [io 0x1000-0x1fff] |
| [ 0.794109] pci 0000:00:02.0: bridge window [mem 0xf2000000-0xf30fffff] |
| [ 0.794485] pci 0000:00:02.0: bridge window [mem 0xe8000000-0xf1ffffff 64bit pref] |
| [ 0.794969] pci 0000:00:14.4: PCI bridge to [bus 02] |
| [ 0.795281] pci 0000:00:15.0: PCI bridge to [bus 03] |
| [ 0.795593] pci 0000:00:15.1: PCI bridge to [bus 04] |
| [ 0.795900] pci 0000:00:15.1: bridge window [mem 0xf3100000-0xf31fffff] |
| [ 0.796273] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7 window] |
| [ 0.796619] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff window] |
| [ 0.796966] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff] |
| [ 0.797316] pci_bus 0000:00: resource 7 [mem 0x000c0000-0x000dffff] |
| [ 0.797670] pci_bus 0000:00: resource 8 [mem 0xe0000000-0xffffffff] |
| [ 0.798019] pci_bus 0000:01: resource 0 [io 0x1000-0x1fff] |
| [ 0.798344] pci_bus 0000:01: resource 1 [mem 0xf2000000-0xf30fffff] |
| [ 0.798693] pci_bus 0000:01: resource 2 [mem 0xe8000000-0xf1ffffff 64bit pref] |
| [ 0.799156] pci_bus 0000:02: resource 4 [io 0x0000-0x0cf7 window] |
| [ 0.799508] pci_bus 0000:02: resource 5 [io 0x0d00-0xffff window] |
| [ 0.799863] pci_bus 0000:02: resource 6 [mem 0x000a0000-0x000bffff] |
| [ 0.800219] pci_bus 0000:02: resource 7 [mem 0x000c0000-0x000dffff] |
| [ 0.800576] pci_bus 0000:02: resource 8 [mem 0xe0000000-0xffffffff] |
| [ 0.800937] pci_bus 0000:04: resource 1 [mem 0xf3100000-0xf31fffff] |
| [ 0.801350] NET: Registered protocol family 2 |
| [ 0.801804] tcp_listen_portaddr_hash hash table entries: 4096 (order: 4, 65536 bytes, linear) |
| [ 0.802428] TCP established hash table entries: 65536 (order: 7, 524288 bytes, linear) |
| [ 0.803183] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes, linear) |
| [ 0.803761] TCP: Hash tables configured (established 65536 bind 65536) |
| [ 0.804196] UDP hash table entries: 4096 (order: 5, 131072 bytes, linear) |
| [ 0.804642] UDP-Lite hash table entries: 4096 (order: 5, 131072 bytes, linear) |
| [ 0.805260] NET: Registered protocol family 1 |
| [ 0.805558] NET: Registered protocol family 44 |
| [ 0.806255] pci 0000:00:12.2: PME# does not work under D3, disabling it |
| [ 0.806941] pci 0000:00:13.2: PME# does not work under D3, disabling it |
| [ 0.808094] pci 0000:00:16.2: PME# does not work under D3, disabling it |
| [ 0.808488] pci 0000:01:00.0: Video device with shadowed ROM at [mem 0x000c0000-0x000dffff] |
| [ 0.809020] pci 0000:01:00.1: D0 power state depends on 0000:01:00.0 |
| [ 0.809571] PCI: CLS 64 bytes, default 64 |
| [ 0.809911] Trying to unpack rootfs image as initramfs... |
| [ 2.443226] Freeing initrd memory: 14004K |
| [ 2.443526] pci 0000:00:00.2: AMD-Vi: Applying erratum 746 workaround |
| [ 2.444237] pci 0000:00:02.0: Adding to iommu group 0 |
| [ 2.444618] pci 0000:00:11.0: Adding to iommu group 1 |
| [ 2.445043] pci 0000:00:12.0: Adding to iommu group 2 |
| [ 2.445376] pci 0000:00:12.2: Adding to iommu group 2 |
| [ 2.445765] pci 0000:00:13.0: Adding to iommu group 3 |
| [ 2.446096] pci 0000:00:13.2: Adding to iommu group 3 |
| [ 2.446513] pci 0000:00:14.0: Adding to iommu group 4 |
| [ 2.446844] pci 0000:00:14.2: Adding to iommu group 4 |
| [ 2.447178] pci 0000:00:14.3: Adding to iommu group 4 |
| [ 2.447559] pci 0000:00:14.4: Adding to iommu group 5 |
| [ 2.447956] pci 0000:00:14.5: Adding to iommu group 6 |
| [ 2.448362] pci 0000:00:15.0: Adding to iommu group 7 |
| [ 2.448698] pci 0000:00:15.1: Adding to iommu group 7 |
| [ 2.449108] pci 0000:00:16.0: Adding to iommu group 8 |
| [ 2.449441] pci 0000:00:16.2: Adding to iommu group 8 |
| [ 2.449868] pci 0000:00:18.0: Adding to iommu group 9 |
| [ 2.450202] pci 0000:00:18.1: Adding to iommu group 9 |
| [ 2.450534] pci 0000:00:18.2: Adding to iommu group 9 |
| [ 2.450870] pci 0000:00:18.3: Adding to iommu group 9 |
| [ 2.451203] pci 0000:00:18.4: Adding to iommu group 9 |
| [ 2.451546] pci 0000:00:18.5: Adding to iommu group 9 |
| [ 2.451874] pci 0000:01:00.0: Adding to iommu group 0 |
| [ 2.452199] pci 0000:01:00.1: Adding to iommu group 0 |
| [ 2.452526] pci 0000:04:00.0: Adding to iommu group 7 |
| [ 2.453295] pci 0000:00:00.2: AMD-Vi: Found IOMMU cap 0x40 |
| [ 2.453626] pci 0000:00:00.2: AMD-Vi: Extended features (0x800000853): |
| [ 2.453990] PreF PPR GT IA |
| [ 2.454228] AMD-Vi: Interrupt remapping enabled |
| [ 2.454727] AMD-Vi: Lazy IO/TLB flushing enabled |
| [ 2.457239] amd_uncore: AMD NB counters detected |
| [ 2.457701] LVT offset 0 assigned for vector 0x400 |
| [ 2.458124] perf: AMD IBS detected (0x000000ff) |
| [ 2.458477] check: Scanning for low memory corruption every 60 seconds |
| [ 2.459328] Initialise system trusted keyrings |
| [ 2.459634] Key type blacklist registered |
| [ 2.460056] workingset: timestamp_bits=41 max_order=21 bucket_order=0 |
| [ 2.462126] zbud: loaded |
| [ 2.468592] Key type asymmetric registered |
| [ 2.468877] Asymmetric key parser 'x509' registered |
| [ 2.469202] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 245) |
| [ 2.469831] io scheduler mq-deadline registered |
| [ 2.470130] io scheduler kyber registered |
| [ 2.470447] io scheduler bfq registered |
| [ 2.471220] pcieport 0000:00:02.0: PME: Signaling with IRQ 25 |
| [ 2.471769] pcieport 0000:00:15.0: PME: Signaling with IRQ 26 |
| [ 2.472235] pcieport 0000:00:15.1: PME: Signaling with IRQ 27 |
| [ 2.472652] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4 |
| [ 2.473154] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input0 |
| [ 2.474849] ACPI: Power Button [PWRB] |
| [ 2.475175] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input1 |
| [ 2.478199] ACPI: Power Button [PWRF] |
| [ 2.479141] GHES: Failed to enable APEI firmware first mode. |
| [ 2.479696] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled |
| [ 2.500640] serial8250: ttyS0 at I/O 0x3f8 (irq = 4, base_baud = 115200) is a 16550A |
| [ 2.521835] serial8250: ttyS1 at I/O 0x2f8 (irq = 3, base_baud = 115200) is a 16550A |
| [ 2.522745] AMD-Vi: AMD IOMMUv2 driver by Joerg Roedel <jroedel@suse.de> |
| [ 2.523835] usbcore: registered new interface driver usbserial_generic |
| [ 2.524206] usbserial: USB Serial support registered for generic |
| [ 2.524576] rtc_cmos 00:01: RTC can wake from S4 |
| [ 2.525028] rtc_cmos 00:01: registered as rtc0 |
| [ 2.525341] rtc_cmos 00:01: alarms up to one day, 114 bytes nvram, hpet irqs |
| [ 2.525898] ledtrig-cpu: registered to indicate activity on CPUs |
| [ 2.526272] x86/pm: family 0x15 cpu detected, MSR saving is needed during suspending. |
| [ 2.526985] NET: Registered protocol family 10 |
| [ 2.535969] Segment Routing with IPv6 |
| [ 2.536271] NET: Registered protocol family 17 |
| [ 2.536993] RAS: Correctable Errors collector initialized. |
| [ 2.537335] sched_clock: Marking stable (2421223027, 115712649)->(2540546974, -3611298) |
| [ 2.538127] registered taskstats version 1 |
| [ 2.538419] Loading compiled-in X.509 certificates |
| [ 2.543798] Loaded X.509 cert 'Build time autogenerated kernel key: f828fb3cc64b10f9ec0732c06d49900c55469f18' |
| [ 2.544427] zswap: loaded using pool lzo/zbud |
| [ 2.553346] Key type big_key registered |
| [ 2.554039] PM: Magic number: 15:407:946 |
| [ 2.554343] tty tty3: hash matches |
| [ 2.554618] processor cpu1: hash matches |
| [ 2.554967] rtc_cmos 00:01: setting system clock to 2019-12-09T17:55:31 UTC (1575914131) |
| [ 2.557556] Freeing unused decrypted memory: 2040K |
| [ 2.558462] Freeing unused kernel image memory: 1628K |
| [ 2.584937] Write protecting the kernel read-only data: 18432k |
| [ 2.586051] Freeing unused kernel image memory: 2012K |
| [ 2.586518] Freeing unused kernel image memory: 184K |
| [ 2.598138] x86/mm: Checked W+X mappings: passed, no W+X pages found. |
| [ 2.598504] Run /init as init process |
| [ 2.625665] printk: console [netcon0] enabled |
| [ 2.625961] netconsole: network logging started |
| [ 2.688890] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver |
| [ 2.690666] ehci-pci: EHCI PCI platform driver |
| [ 2.691161] QUIRK: Enable AMD PLL fix |
| [ 2.691201] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver |
| [ 2.692925] ehci-pci 0000:00:12.2: EHCI Host Controller |
| [ 2.693249] ehci-pci 0000:00:12.2: new USB bus registered, assigned bus number 1 |
| [ 2.693744] ehci-pci 0000:00:12.2: applying AMD SB700/SB800/Hudson-2/3 EHCI dummy qh workaround |
| [ 2.694270] ehci-pci 0000:00:12.2: debug port 1 |
| [ 2.694624] ehci-pci 0000:00:12.2: irq 17, io mem 0xf3289000 |
| [ 2.697689] SCSI subsystem initialized |
| [ 2.704487] cryptd: max_cpu_qlen set to 1000 |
| [ 2.709298] ehci-pci 0000:00:12.2: USB 2.0 started, EHCI 1.00 |
| [ 2.709838] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 5.03 |
| [ 2.710363] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 |
| [ 2.710831] usb usb1: Product: EHCI Host Controller |
| [ 2.711135] usb usb1: Manufacturer: Linux 5.3.13-gnu-1 ehci_hcd |
| [ 2.711480] usb usb1: SerialNumber: 0000:00:12.2 |
| [ 2.711926] hub 1-0:1.0: USB hub found |
| [ 2.712203] hub 1-0:1.0: 5 ports detected |
| [ 2.713071] xhci_hcd 0000:04:00.0: xHCI Host Controller |
| [ 2.713398] xhci_hcd 0000:04:00.0: new USB bus registered, assigned bus number 2 |
| [ 2.717870] AVX version of gcm_enc/dec engaged. |
| [ 2.718430] AES CTR mode by8 optimization enabled |
| [ 2.719008] libata version 3.00 loaded. |
| [ 2.726577] ahci 0000:00:11.0: version 3.0 |
| [ 2.727358] ahci 0000:00:11.0: AHCI 0001.0300 32 slots 8 ports 6 Gbps 0xa impl SATA mode |
| [ 2.728722] ahci 0000:00:11.0: flags: 64bit ncq sntf ilck led clo pio |
| [ 2.731458] scsi host0: ahci |
| [ 2.735147] scsi host1: ahci |
| [ 2.735923] scsi host2: ahci |
| [ 2.737921] scsi host3: ahci |
| [ 2.741476] scsi host4: ahci |
| [ 2.744831] scsi host5: ahci |
| [ 2.745220] scsi host6: ahci |
| [ 2.751509] scsi host7: ahci |
| [ 2.751887] ata1: DUMMY |
| [ 2.752109] ata2: SATA max UDMA/133 abar m2048@0xf3288000 port 0xf3288180 irq 19 |
| [ 2.752605] ata3: DUMMY |
| [ 2.753001] ata4: SATA max UDMA/133 abar m2048@0xf3288000 port 0xf3288280 irq 19 |
| [ 2.753883] ata5: DUMMY |
| [ 2.754282] ata6: DUMMY |
| [ 2.754666] ata7: DUMMY |
| [ 2.755102] ata8: DUMMY |
| [ 2.773247] xhci_hcd 0000:04:00.0: hcc params 0x0200f180 hci version 0x96 quirks 0x0000000000080000 |
| [ 2.774205] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 5.03 |
| [ 2.774723] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1 |
| [ 2.775221] usb usb2: Product: xHCI Host Controller |
| [ 2.775536] usb usb2: Manufacturer: Linux 5.3.13-gnu-1 xhci-hcd |
| [ 2.775885] usb usb2: SerialNumber: 0000:04:00.0 |
| [ 2.776389] hub 2-0:1.0: USB hub found |
| [ 2.776675] hub 2-0:1.0: 2 ports detected |
| [ 2.777147] ehci-pci 0000:00:13.2: EHCI Host Controller |
| [ 2.777484] ehci-pci 0000:00:13.2: new USB bus registered, assigned bus number 3 |
| [ 2.777696] xhci_hcd 0000:04:00.0: xHCI Host Controller |
| [ 2.777999] ehci-pci 0000:00:13.2: applying AMD SB700/SB800/Hudson-2/3 EHCI dummy qh workaround |
| [ 2.778339] xhci_hcd 0000:04:00.0: new USB bus registered, assigned bus number 4 |
| [ 2.778874] ehci-pci 0000:00:13.2: debug port 1 |
| [ 2.779382] xhci_hcd 0000:04:00.0: Host supports USB 3.0 SuperSpeed |
| [ 2.779739] ehci-pci 0000:00:13.2: irq 17, io mem 0xf328a000 |
| [ 2.780095] usb usb4: We don't know the algorithms for LPM for this host, disabling LPM. |
| [ 2.780932] usb usb4: New USB device found, idVendor=1d6b, idProduct=0003, bcdDevice= 5.03 |
| [ 2.781470] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1 |
| [ 2.781952] usb usb4: Product: xHCI Host Controller |
| [ 2.782260] usb usb4: Manufacturer: Linux 5.3.13-gnu-1 xhci-hcd |
| [ 2.782606] usb usb4: SerialNumber: 0000:04:00.0 |
| [ 2.783334] hub 4-0:1.0: USB hub found |
| [ 2.783621] hub 4-0:1.0: 2 ports detected |
| [ 2.791530] ehci-pci 0000:00:13.2: USB 2.0 started, EHCI 1.00 |
| [ 2.791963] usb usb3: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 5.03 |
| [ 2.792479] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1 |
| [ 2.792959] usb usb3: Product: EHCI Host Controller |
| [ 2.793268] usb usb3: Manufacturer: Linux 5.3.13-gnu-1 ehci_hcd |
| [ 2.793613] usb usb3: SerialNumber: 0000:00:13.2 |
| [ 2.794143] hub 3-0:1.0: USB hub found |
| [ 2.794422] hub 3-0:1.0: 5 ports detected |
| [ 2.795082] ehci-pci 0000:00:16.2: EHCI Host Controller |
| [ 2.795409] ehci-pci 0000:00:16.2: new USB bus registered, assigned bus number 5 |
| [ 2.795897] ehci-pci 0000:00:16.2: applying AMD SB700/SB800/Hudson-2/3 EHCI dummy qh workaround |
| [ 2.796432] ehci-pci 0000:00:16.2: debug port 1 |
| [ 2.796767] ehci-pci 0000:00:16.2: irq 17, io mem 0xf328b000 |
| [ 2.808284] ehci-pci 0000:00:16.2: USB 2.0 started, EHCI 1.00 |
| [ 2.808730] usb usb5: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 5.03 |
| [ 2.809246] usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1 |
| [ 2.809726] usb usb5: Product: EHCI Host Controller |
| [ 2.810039] usb usb5: Manufacturer: Linux 5.3.13-gnu-1 ehci_hcd |
| [ 2.810384] usb usb5: SerialNumber: 0000:00:16.2 |
| [ 2.810853] hub 5-0:1.0: USB hub found |
| [ 2.811132] hub 5-0:1.0: 4 ports detected |
| [ 2.812997] ohci-pci: OHCI PCI platform driver |
| [ 2.813467] ohci-pci 0000:00:12.0: OHCI PCI host controller |
| [ 2.813810] ohci-pci 0000:00:12.0: new USB bus registered, assigned bus number 6 |
| [ 2.814349] ohci-pci 0000:00:12.0: irq 18, io mem 0xf3284000 |
| [ 2.872342] usb usb6: New USB device found, idVendor=1d6b, idProduct=0001, bcdDevice= 5.03 |
| [ 2.872863] usb usb6: New USB device strings: Mfr=3, Product=2, SerialNumber=1 |
| [ 2.873342] usb usb6: Product: OHCI PCI host controller |
| [ 2.873663] usb usb6: Manufacturer: Linux 5.3.13-gnu-1 ohci_hcd |
| [ 2.874007] usb usb6: SerialNumber: 0000:00:12.0 |
| [ 2.874562] hub 6-0:1.0: USB hub found |
| [ 2.874849] hub 6-0:1.0: 5 ports detected |
| [ 2.875479] ohci-pci 0000:00:13.0: OHCI PCI host controller |
| [ 2.875817] ohci-pci 0000:00:13.0: new USB bus registered, assigned bus number 7 |
| [ 2.876338] ohci-pci 0000:00:13.0: irq 18, io mem 0xf3285000 |
| [ 2.935613] usb usb7: New USB device found, idVendor=1d6b, idProduct=0001, bcdDevice= 5.03 |
| [ 2.936134] usb usb7: New USB device strings: Mfr=3, Product=2, SerialNumber=1 |
| [ 2.936614] usb usb7: Product: OHCI PCI host controller |
| [ 2.936935] usb usb7: Manufacturer: Linux 5.3.13-gnu-1 ohci_hcd |
| [ 2.937279] usb usb7: SerialNumber: 0000:00:13.0 |
| [ 2.937821] hub 7-0:1.0: USB hub found |
| [ 2.938107] hub 7-0:1.0: 5 ports detected |
| [ 2.938739] ohci-pci 0000:00:14.5: OHCI PCI host controller |
| [ 2.939078] ohci-pci 0000:00:14.5: new USB bus registered, assigned bus number 8 |
| [ 2.939594] ohci-pci 0000:00:14.5: irq 18, io mem 0xf3286000 |
| [ 2.998959] usb usb8: New USB device found, idVendor=1d6b, idProduct=0001, bcdDevice= 5.03 |
| [ 2.999480] usb usb8: New USB device strings: Mfr=3, Product=2, SerialNumber=1 |
| [ 2.999959] usb usb8: Product: OHCI PCI host controller |
| [ 3.000280] usb usb8: Manufacturer: Linux 5.3.13-gnu-1 ohci_hcd |
| [ 3.000624] usb usb8: SerialNumber: 0000:00:14.5 |
| [ 3.001156] hub 8-0:1.0: USB hub found |
| [ 3.001443] hub 8-0:1.0: 2 ports detected |
| [ 3.002026] ohci-pci 0000:00:16.0: OHCI PCI host controller |
| [ 3.002364] ohci-pci 0000:00:16.0: new USB bus registered, assigned bus number 9 |
| [ 3.002881] ohci-pci 0000:00:16.0: irq 18, io mem 0xf3287000 |
| [ 3.044855] usb 1-3: new high-speed USB device number 2 using ehci-pci |
| [ 3.062277] usb usb9: New USB device found, idVendor=1d6b, idProduct=0001, bcdDevice= 5.03 |
| [ 3.062799] usb usb9: New USB device strings: Mfr=3, Product=2, SerialNumber=1 |
| [ 3.063278] usb usb9: Product: OHCI PCI host controller |
| [ 3.063599] usb usb9: Manufacturer: Linux 5.3.13-gnu-1 ohci_hcd |
| [ 3.063943] usb usb9: SerialNumber: 0000:00:16.0 |
| [ 3.064496] hub 9-0:1.0: USB hub found |
| [ 3.064790] hub 9-0:1.0: 4 ports detected |
| [ 3.069235] ata2: SATA link up 6.0 Gbps (SStatus 133 SControl 300) |
| [ 3.071849] ata2.00: supports DRM functions and may not be fully accessible |
| [ 3.072712] ata2.00: ATA-11: Samsung SSD 860 QVO 2TB, RVQ01B6Q, max UDMA/133 |
| [ 3.073098] ata2.00: 3907029168 sectors, multi 1: LBA48 NCQ (depth 32), AA |
| [ 3.075572] ata2.00: supports DRM functions and may not be fully accessible |
| [ 3.078206] ata2.00: configured for UDMA/133 |
| [ 3.078782] scsi 1:0:0:0: Direct-Access ATA Samsung SSD 860 1B6Q PQ: 0 ANSI: 5 |
| [ 3.141525] usb 5-3: new high-speed USB device number 2 using ehci-pci |
| [ 3.193711] usb 1-3: New USB device found, idVendor=05e3, idProduct=0608, bcdDevice=85.36 |
| [ 3.194229] usb 1-3: New USB device strings: Mfr=0, Product=1, SerialNumber=0 |
| [ 3.194616] usb 1-3: Product: USB2.0 Hub |
| [ 3.195847] hub 1-3:1.0: USB hub found |
| [ 3.197202] hub 1-3:1.0: 4 ports detected |
| [ 3.289861] usb 5-3: New USB device found, idVendor=05e3, idProduct=0608, bcdDevice= 9.01 |
| [ 3.290363] usb 5-3: New USB device strings: Mfr=0, Product=1, SerialNumber=0 |
| [ 3.290742] usb 5-3: Product: USB2.0 Hub |
| [ 3.292060] hub 5-3:1.0: USB hub found |
| [ 3.293408] hub 5-3:1.0: 4 ports detected |
| [ 3.324858] usb 1-4: new high-speed USB device number 3 using ehci-pci |
| [ 3.464847] tsc: Refined TSC clocksource calibration: 3200.259 MHz |
| [ 3.465215] clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x2e213e5f87c, max_idle_ns: 440795229362 ns |
| [ 3.465854] clocksource: Switched to clocksource tsc |
| [ 3.473683] usb 1-4: New USB device found, idVendor=05e3, idProduct=0608, bcdDevice=85.36 |
| [ 3.474186] usb 1-4: New USB device strings: Mfr=0, Product=1, SerialNumber=0 |
| [ 3.474566] usb 1-4: Product: USB2.0 Hub |
| [ 3.475830] hub 1-4:1.0: USB hub found |
| [ 3.477178] hub 1-4:1.0: 4 ports detected |
| [ 3.544857] usb 1-3.4: new high-speed USB device number 4 using ehci-pci |
| [ 3.574861] usb 5-3.4: new full-speed USB device number 3 using ehci-pci |
| [ 3.642021] usb 1-3.4: New USB device found, idVendor=0525, idProduct=a4a7, bcdDevice= 5.04 |
| [ 3.642530] usb 1-3.4: New USB device strings: Mfr=0, Product=0, SerialNumber=0 |
| [ 3.672905] usb 5-3.4: New USB device found, idVendor=058f, idProduct=9254, bcdDevice= 3.12 |
| [ 3.673414] usb 5-3.4: New USB device strings: Mfr=1, Product=2, SerialNumber=0 |
| [ 3.673881] usb 5-3.4: Product: Generic USB Hub |
| [ 3.674170] usb 5-3.4: Manufacturer: ALCOR |
| [ 3.674948] hub 5-3.4:1.0: USB hub found |
| [ 3.675401] hub 5-3.4:1.0: 4 ports detected |
| [ 3.954850] usb 5-3.4.2: new low-speed USB device number 4 using ehci-pci |
| [ 4.063001] usb 5-3.4.2: New USB device found, idVendor=0e6a, idProduct=6001, bcdDevice= 0.07 |
| [ 4.063519] usb 5-3.4.2: New USB device strings: Mfr=0, Product=1, SerialNumber=0 |
| [ 4.063991] usb 5-3.4.2: Product: HID Keyboard Device |
| [ 4.076942] hidraw: raw HID events driver (C) Jiri Kosina |
| [ 4.090902] usbcore: registered new interface driver usbhid |
| [ 4.091233] usbhid: USB HID core driver |
| [ 4.093571] input: HID Keyboard Device as /devices/pci0000:00/0000:00:16.2/usb5/5-3/5-3.4/5-3.4.2/5-3.4.2:1.0/0003:0E6A:6001.0001/input/input2 |
| [ 4.148208] usb 5-3.4.3: new low-speed USB device number 5 using ehci-pci |
| [ 4.148405] hid-generic 0003:0E6A:6001.0001: input,hidraw0: USB HID v1.10 Keyboard [HID Keyboard Device] on usb-0000:00:16.2-3.4.2/input0 |
| [ 4.149532] input: HID Keyboard Device Consumer Control as /devices/pci0000:00/0000:00:16.2/usb5/5-3/5-3.4/5-3.4.2/5-3.4.2:1.1/0003:0E6A:6001.0002/input/input3 |
| [ 4.204930] input: HID Keyboard Device System Control as /devices/pci0000:00/0000:00:16.2/usb5/5-3/5-3.4/5-3.4.2/5-3.4.2:1.1/0003:0E6A:6001.0002/input/input4 |
| [ 4.205715] hid-generic 0003:0E6A:6001.0002: input,hidraw1: USB HID v1.10 Device [HID Keyboard Device] on usb-0000:00:16.2-3.4.2/input1 |
| [ 4.251476] usb 5-3.4.3: New USB device found, idVendor=046d, idProduct=c025, bcdDevice=98.02 |
| [ 4.252012] usb 5-3.4.3: New USB device strings: Mfr=1, Product=2, SerialNumber=0 |
| [ 4.252501] usb 5-3.4.3: Product: USB-PS/2 Optical Mouse |
| [ 4.252826] usb 5-3.4.3: Manufacturer: B16_b_02 |
| [ 4.257717] input: B16_b_02 USB-PS/2 Optical Mouse as /devices/pci0000:00/0000:00:16.2/usb5/5-3/5-3.4/5-3.4.3/5-3.4.3:1.0/0003:046D:C025.0003/input/input5 |
| [ 4.258579] hid-generic 0003:046D:C025.0003: input,hidraw2: USB HID v1.10 Mouse [B16_b_02 USB-PS/2 Optical Mouse] on usb-0000:00:16.2-3.4.3/input0 |
| [ 8.114855] ata4: link is slow to respond, please be patient (ready=0) |
| [ 12.761521] ata4: COMRESET failed (errno=-16) |
| [ 18.118179] ata4: link is slow to respond, please be patient (ready=0) |
| [ 22.764844] ata4: COMRESET failed (errno=-16) |
| [ 28.121514] ata4: link is slow to respond, please be patient (ready=0) |
| [ 57.814836] ata4: COMRESET failed (errno=-16) |
| [ 62.831508] ata4: COMRESET failed (errno=-16) |
| [ 62.831809] ata4: reset failed, giving up |
| [ 62.839587] ata2.00: Enabling discard_zeroes_data |
| [ 62.840059] sd 1:0:0:0: [sda] 3907029168 512-byte logical blocks: (2.00 TB/1.82 TiB) |
| [ 62.840572] sd 1:0:0:0: [sda] Write Protect is off |
| [ 62.840881] sd 1:0:0:0: [sda] Mode Sense: 00 3a 00 00 |
| [ 62.841223] sd 1:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA |
| [ 62.841977] ata2.00: Enabling discard_zeroes_data |
| [ 62.848412] sda: sda1 |
| [ 62.849023] ata2.00: Enabling discard_zeroes_data |
| [ 62.851132] sd 1:0:0:0: [sda] supports TCG Opal |
| [ 62.851458] sd 1:0:0:0: [sda] Attached SCSI disk |
| [ 62.859294] random: fast init done |
| [ 62.877188] random: lvm: uninitialized urandom read (4 bytes read) |
| [ 62.893182] device-mapper: uevent: version 1.0.3 |
| [ 62.893627] device-mapper: ioctl: 4.40.0-ioctl (2019-01-18) initialised: dm-devel@redhat.com |
| [ 62.895349] random: lvm: uninitialized urandom read (2 bytes read) |
| [ 67.895384] random: cryptsetup: uninitialized urandom read (2 bytes read) |
| [ 67.910289] random: lvm: uninitialized urandom read (4 bytes read) |
| [ 67.922664] random: lvm: uninitialized urandom read (2 bytes read) |
| [ 68.120069] EXT4-fs (dm-4): mounted filesystem with ordered data mode. Opts: (null) |
| [ 68.385385] systemd[1]: systemd 243.162-2.parabola1-parabola running in system mode. (+PAM +AUDIT -SELINUX -IMA -APPARMOR +SMACK -SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ +LZ4 +SECCOMP +BLKID +ELFUTILS +KMOD +IDN2 -IDN +PCRE2 default-hierarchy=hybrid) |
| [ 68.401655] systemd[1]: Detected architecture x86-64. |
| [ 68.410230] systemd[1]: Set hostname to <f2a85m-pro>. |
| [ 68.790050] systemd[1]: /usr/lib/systemd/system/virtlogd.socket:6: ListenStream= references a path below legacy directory /var/run/, updating /var/run/libvirt/virtlogd-sock → /run/libvirt/virtlogd-sock; please update the unit file accordingly. |
| [ 68.792256] systemd[1]: /usr/lib/systemd/system/virtlogd-admin.socket:8: ListenStream= references a path below legacy directory /var/run/, updating /var/run/libvirt/virtlogd-admin-sock → /run/libvirt/virtlogd-admin-sock; please update the unit file accordingly. |
| [ 68.810140] systemd[1]: /usr/lib/systemd/system/libvirtd-admin.socket:9: ListenStream= references a path below legacy directory /var/run/, updating /var/run/libvirt/libvirt-admin-sock → /run/libvirt/libvirt-admin-sock; please update the unit file accordingly. |
| [ 68.812001] systemd[1]: /usr/lib/systemd/system/libvirtd-ro.socket:9: ListenStream= references a path below legacy directory /var/run/, updating /var/run/libvirt/libvirt-sock-ro → /run/libvirt/libvirt-sock-ro; please update the unit file accordingly. |
| [ 68.813590] systemd[1]: /usr/lib/systemd/system/libvirtd.socket:7: ListenStream= references a path below legacy directory /var/run/, updating /var/run/libvirt/libvirt-sock → /run/libvirt/libvirt-sock; please update the unit file accordingly. |
| [ 68.815217] systemd[1]: /usr/lib/systemd/system/virtlockd.socket:6: ListenStream= references a path below legacy directory /var/run/, updating /var/run/libvirt/virtlockd-sock → /run/libvirt/virtlockd-sock; please update the unit file accordingly. |
| [ 68.817452] systemd[1]: /usr/lib/systemd/system/virtlockd-admin.socket:8: ListenStream= references a path below legacy directory /var/run/, updating /var/run/libvirt/virtlockd-admin-sock → /run/libvirt/virtlockd-admin-sock; please update the unit file accordingly. |
| [ 68.937348] usbcore: registered new device driver usbip-host |
| [ 69.264024] random: crng init done |
| [ 69.264286] random: 5 urandom warning(s) missed due to ratelimiting |
| [ 69.579330] audit: type=1130 audit(1575914198.520:2): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=systemd-journald comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success' |
| [ 69.589750] systemd-journald[405]: Received client request to flush runtime journal. |
| [ 69.703395] audit: type=1130 audit(1575914198.644:3): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=systemd-udevd comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success' |
| [ 70.212471] audit: type=1130 audit(1575914199.154:4): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=systemd-journal-flush comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success' |
| [ 70.687977] piix4_smbus 0000:00:14.0: SMBus Host Controller at 0xb00, revision 0 |
| [ 70.688655] piix4_smbus 0000:00:14.0: Using register 0x2e for SMBus port selection |
| [ 70.689310] piix4_smbus 0000:00:14.0: Auxiliary SMBus Host Controller at 0xb20 |
| [ 70.739721] acpi_cpufreq: overriding BIOS provided _PSD data |
| [ 70.854169] Linux agpgart interface v0.103 |
| [ 70.937252] snd_hda_intel 0000:01:00.1: Disabling MSI |
| [ 70.937580] snd_hda_intel 0000:01:00.1: Handle vga_switcheroo audio client |
| [ 71.002314] snd_hda_codec_realtek hdaudioC0D0: ALC892: SKU not ready 0x00000100 |
| [ 71.003354] snd_hda_codec_realtek hdaudioC0D0: autoconfig for ALC892: line_outs=4 (0x14/0x16/0x15/0x17/0x0) type:line |
| [ 71.003942] snd_hda_codec_realtek hdaudioC0D0: speaker_outs=0 (0x0/0x0/0x0/0x0/0x0) |
| [ 71.004433] snd_hda_codec_realtek hdaudioC0D0: hp_outs=1 (0x1b/0x0/0x0/0x0/0x0) |
| [ 71.004951] snd_hda_codec_realtek hdaudioC0D0: mono: mono_out=0x0 |
| [ 71.005306] snd_hda_codec_realtek hdaudioC0D0: dig-out=0x1e/0x0 |
| [ 71.005656] snd_hda_codec_realtek hdaudioC0D0: inputs: |
| [ 71.005981] snd_hda_codec_realtek hdaudioC0D0: Rear Mic=0x18 |
| [ 71.006346] snd_hda_codec_realtek hdaudioC0D0: Front Mic=0x19 |
| [ 71.006706] snd_hda_codec_realtek hdaudioC0D0: Line=0x1a |
| [ 71.007048] snd_hda_codec_realtek hdaudioC0D0: CD=0x1c |
| [ 71.030936] input: HDA Digital PCBeep as /devices/pci0000:00/0000:00:14.2/sound/card0/input6 |
| [ 71.031563] input: HD-Audio Generic Rear Mic as /devices/pci0000:00/0000:00:14.2/sound/card0/input7 |
| [ 71.032177] input: HD-Audio Generic Front Mic as /devices/pci0000:00/0000:00:14.2/sound/card0/input8 |
| [ 71.032795] input: HD-Audio Generic Line as /devices/pci0000:00/0000:00:14.2/sound/card0/input9 |
| [ 71.033401] input: HD-Audio Generic Line Out Front as /devices/pci0000:00/0000:00:14.2/sound/card0/input10 |
| [ 71.034035] input: HD-Audio Generic Line Out Surround as /devices/pci0000:00/0000:00:14.2/sound/card0/input11 |
| [ 71.034681] input: HD-Audio Generic Line Out CLFE as /devices/pci0000:00/0000:00:14.2/sound/card0/input12 |
| [ 71.035381] input: HD-Audio Generic Line Out Side as /devices/pci0000:00/0000:00:14.2/sound/card0/input13 |
| [ 71.036543] input: HD-Audio Generic Front Headphone as /devices/pci0000:00/0000:00:14.2/sound/card0/input14 |
| [ 71.415500] input: HDA NVidia HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:02.0/0000:01:00.1/sound/card1/input15 |
| [ 71.416191] input: HDA NVidia HDMI/DP,pcm=7 as /devices/pci0000:00/0000:00:02.0/0000:01:00.1/sound/card1/input16 |
| [ 71.519215] cdc_acm 1-3.4:1.0: ttyACM0: USB ACM device |
| [ 71.528294] cdc_acm 1-3.4:1.2: ttyACM1: USB ACM device |
| [ 71.530145] usbcore: registered new interface driver cdc_acm |
| [ 71.530487] cdc_acm: USB Abstract Control Model driver for USB modems and ISDN adapters |
| [ 71.559445] cdc_ether 1-3.4:1.4 usb0: register 'cdc_ether' at usb-0000:00:12.2-3.4, CDC Ethernet Device, 1a:1b:f1:e9:94:2e |
| [ 71.560220] usbcore: registered new interface driver cdc_ether |
| [ 71.658376] kvm: Nested Virtualization enabled |
| [ 71.658682] kvm: Nested Paging enabled |
| [ 71.698533] MCE: In-kernel MCE decoding enabled. |
| [ 71.703482] EDAC amd64: Node 0: DRAM ECC disabled. |
| [ 71.703807] EDAC amd64: ECC disabled in the BIOS or no ECC capability, module will not load. |
| Either enable ECC checking or force module loading by setting 'ecc_enable_override'. |
| (Note that use of the override may cause unknown side effects.) |
| [ 71.737994] audit: type=1130 audit(1575914200.677:5): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=lvm2-monitor comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success' |
| [ 71.815423] EDAC amd64: Node 0: DRAM ECC disabled. |
| [ 71.815737] EDAC amd64: ECC disabled in the BIOS or no ECC capability, module will not load. |
| Either enable ECC checking or force module loading by setting 'ecc_enable_override'. |
| (Note that use of the override may cause unknown side effects.) |
| [ 71.819854] nouveau 0000:01:00.0: NVIDIA GF119 (0d90a0a1) |
| [ 71.831210] audit: type=1130 audit(1575914200.770:6): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=lvm2-pvscan@8:1 comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success' |
| [ 71.855432] EDAC amd64: Node 0: DRAM ECC disabled. |
| [ 71.855746] EDAC amd64: ECC disabled in the BIOS or no ECC capability, module will not load. |
| Either enable ECC checking or force module loading by setting 'ecc_enable_override'. |
| (Note that use of the override may cause unknown side effects.) |
| [ 71.912365] EDAC amd64: Node 0: DRAM ECC disabled. |
| [ 71.912679] EDAC amd64: ECC disabled in the BIOS or no ECC capability, module will not load. |
| Either enable ECC checking or force module loading by setting 'ecc_enable_override'. |
| (Note that use of the override may cause unknown side effects.) |
| [ 72.007677] mousedev: PS/2 mouse device common for all mice |
| [ 72.150339] nouveau 0000:01:00.0: bios: version 75.19.55.00.02 |
| [ 72.155122] nouveau 0000:01:00.0: fb: 1024 MiB DDR3 |
| [ 72.389887] [TTM] Zone kernel: Available graphics memory: 4100840 KiB |
| [ 72.390300] [TTM] Zone dma32: Available graphics memory: 2097152 KiB |
| [ 72.390708] [TTM] Initializing pool allocator |
| [ 72.391051] [TTM] Initializing DMA pool allocator |
| [ 72.392271] nouveau 0000:01:00.0: DRM: VRAM: 1024 MiB |
| [ 72.392636] nouveau 0000:01:00.0: DRM: GART: 1048576 MiB |
| [ 72.393066] nouveau 0000:01:00.0: DRM: TMDS table version 2.0 |
| [ 72.393812] nouveau 0000:01:00.0: DRM: DCB version 4.0 |
| [ 72.394177] nouveau 0000:01:00.0: DRM: DCB outp 00: 02000300 00000000 |
| [ 72.394585] nouveau 0000:01:00.0: DRM: DCB outp 01: 01000302 00020030 |
| [ 72.397840] nouveau 0000:01:00.0: DRM: DCB outp 02: 02011362 00020010 |
| [ 72.398585] nouveau 0000:01:00.0: DRM: DCB outp 03: 04022310 00000000 |
| [ 72.398995] nouveau 0000:01:00.0: DRM: DCB conn 00: 00001030 |
| [ 72.399375] nouveau 0000:01:00.0: DRM: DCB conn 01: 00002161 |
| [ 72.399755] nouveau 0000:01:00.0: DRM: DCB conn 02: 00000200 |
| [ 72.406830] nouveau 0000:01:00.0: DRM: MM: using COPY0 for buffer copies |
| [ 72.416974] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013). |
| [ 72.417397] [drm] Driver supports precise vblank timestamp query. |
| [ 72.584987] audit: type=1130 audit(1575914201.527:7): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=lvm2-pvscan@254:3 comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success' |
| [ 72.623592] EXT4-fs (dm-1): warning: maximal mount count reached, running e2fsck is recommended |
| [ 72.624792] Adding 16777212k swap on /dev/mapper/F2A85M_PRO-swap. Priority:-2 extents:1 across:16777212k SSFS |
| [ 72.628816] EXT4-fs (dm-1): mounted filesystem with ordered data mode. Opts: (null) |
| [ 72.736079] audit: type=1130 audit(1575914201.677:8): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=systemd-tmpfiles-setup comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success' |
| [ 72.746557] audit: type=1127 audit(1575914201.687:9): pid=2031 uid=0 auid=4294967295 ses=4294967295 msg=' comm="systemd-update-utmp" exe="/usr/lib/systemd/systemd-update-utmp" hostname=? addr=? terminal=? res=success' |
| [ 72.776420] audit: type=1130 audit(1575914201.717:10): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=systemd-update-utmp comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success' |
| [ 72.855825] audit: type=1130 audit(1575914201.797:11): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=dbus comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success' |
| [ 72.881065] nct6775: Refusing to enable a Super-I/O device with a base I/O port 0 |
| [ 72.919635] nouveau 0000:01:00.0: DRM: allocated 1920x1080 fb: 0x80000, bo 00000000038e579c |
| [ 72.941667] fbcon: nouveaudrmfb (fb0) is primary device |
| [ 73.011286] Console: switching to colour frame buffer device 210x65 |
| [ 73.050789] nouveau 0000:01:00.0: fb0: nouveaudrmfb frame buffer device |
| [ 73.092575] [drm] Initialized nouveau 1.3.1 20120801 for 0000:01:00.0 on minor 0 |
| [ 73.573611] bridge: filtering via arp/ip/ip6tables is no longer available by default. Update your scripts to load br_netfilter if you need this. |
| [ 73.577298] device usb0 entered promiscuous mode |
| [ 73.585489] lan0: port 1(usb0) entered blocking state |
| [ 73.585671] lan0: port 1(usb0) entered disabled state |
| [ 73.587834] lan0: port 1(usb0) entered blocking state |
| [ 73.588034] lan0: port 1(usb0) entered forwarding state |
| [ 74.611439] IPv6: ADDRCONF(NETDEV_CHANGE): lan0: link becomes ready |
| [ 74.780971] kauditd_printk_skb: 14 callbacks suppressed |
| [ 74.780974] audit: type=1130 audit(1575914203.720:26): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=systemd-logind comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success' |
| [ 74.784200] audit: type=1130 audit(1575914203.724:27): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=libvirtd comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success' |
| [ 74.792807] audit: type=1130 audit(1575914203.734:28): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=lightdm comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success' |
| [ 74.809924] audit: type=1130 audit(1575914203.750:29): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=coreboot@boot comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success' |
| [ 75.021751] audit: type=1130 audit(1575914203.964:30): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=polkit comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success' |
| [ 75.027480] audit: type=1130 audit(1575914203.967:31): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=accounts-daemon comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success' |
| [ 75.227343] tun: Universal TUN/TAP device driver, 1.6 |
| [ 75.231660] virbr-lxc0: port 1(virbr-lxc0-nic) entered blocking state |
| [ 75.232146] virbr-lxc0: port 1(virbr-lxc0-nic) entered disabled state |
| [ 75.232415] device virbr-lxc0-nic entered promiscuous mode |
| [ 75.232634] audit: type=1700 audit(1575914204.174:32): dev=virbr-lxc0-nic prom=256 old_prom=0 auid=4294967295 uid=0 gid=0 ses=4294967295 |
| [ 75.280744] audit: type=1325 audit(1575914204.220:33): table=filter family=10 entries=0 |
| [ 75.352078] audit: type=1325 audit(1575914204.290:34): table=nat family=2 entries=0 |
| [ 75.360538] audit: type=1325 audit(1575914204.300:35): table=mangle family=2 entries=0 |
| [ 75.566245] virbr-lxc0: port 1(virbr-lxc0-nic) entered blocking state |
| [ 75.566500] virbr-lxc0: port 1(virbr-lxc0-nic) entered listening state |
| [ 75.665395] virbr-lxc0: port 1(virbr-lxc0-nic) entered disabled state |
| [ 75.981856] lan0: port 2(vnet0) entered blocking state |
| [ 75.982062] lan0: port 2(vnet0) entered disabled state |
| [ 75.982322] device vnet0 entered promiscuous mode |
| [ 75.982574] lan0: port 2(vnet0) entered blocking state |
| [ 75.982736] lan0: port 2(vnet0) entered forwarding state |
| [ 76.041064] fuse: init (API version 7.31) |
| [ 76.125262] eth0: renamed from vnet1 |
| [ 76.159729] lan0: port 3(vnet1) entered blocking state |
| [ 76.159910] lan0: port 3(vnet1) entered disabled state |
| [ 76.160137] device vnet1 entered promiscuous mode |
| [ 76.160536] lan0: port 3(vnet1) entered blocking state |
| [ 76.160700] lan0: port 3(vnet1) entered forwarding state |
| [ 76.278947] eth0: renamed from vnet2 |
| [ 76.638140] lan0: port 2(vnet0) entered disabled state |
| [ 76.643742] lan0: port 3(vnet1) entered disabled state |
| [ 76.833707] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready |
| [ 76.833959] IPv6: ADDRCONF(NETDEV_CHANGE): vnet0: link becomes ready |
| [ 76.834209] lan0: port 2(vnet0) entered blocking state |
| [ 76.834381] lan0: port 2(vnet0) entered forwarding state |
| [ 76.925688] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready |
| [ 76.925928] IPv6: ADDRCONF(NETDEV_CHANGE): vnet1: link becomes ready |
| [ 76.926172] lan0: port 3(vnet1) entered blocking state |
| [ 76.926339] lan0: port 3(vnet1) entered forwarding state |
| [ 81.484768] kauditd_printk_skb: 150 callbacks suppressed |
| [ 81.484772] audit: type=1100 audit(1575914210.424:186): pid=3704 uid=0 auid=4294967295 ses=4294967295 msg='op=PAM:authentication grantors=pam_tally2,pam_shells,pam_unix,pam_permit,pam_gnome_keyring acct="gnutoo" exe="/usr/bin/lightdm" hostname=? addr=? terminal=:0 res=success' |
| [ 81.494642] audit: type=1101 audit(1575914210.434:187): pid=3704 uid=0 auid=4294967295 ses=4294967295 msg='op=PAM:accounting grantors=pam_tally2,pam_access,pam_unix,pam_permit,pam_time acct="gnutoo" exe="/usr/bin/lightdm" hostname=? addr=? terminal=:0 res=success' |
| [ 81.646433] audit: type=1106 audit(1575914210.587:188): pid=2982 uid=0 auid=4294967295 ses=4294967295 msg='op=PAM:session_close grantors=pam_unix,pam_systemd acct="lightdm" exe="/usr/bin/lightdm" hostname=? addr=? terminal=:0 res=success' |
| [ 81.647155] audit: type=1104 audit(1575914210.587:189): pid=2982 uid=0 auid=4294967295 ses=4294967295 msg='op=PAM:setcred grantors=pam_env,pam_permit acct="lightdm" exe="/usr/bin/lightdm" hostname=? addr=? terminal=:0 res=success' |
| [ 81.659042] audit: type=1103 audit(1575914210.600:190): pid=3704 uid=0 auid=4294967295 ses=4294967295 msg='op=PAM:setcred grantors=pam_tally2,pam_shells,pam_unix,pam_permit,pam_gnome_keyring acct="gnutoo" exe="/usr/bin/lightdm" hostname=? addr=? terminal=:0 res=success' |
| [ 81.659854] audit: type=1006 audit(1575914210.600:191): pid=3704 uid=0 old-auid=4294967295 auid=1000 tty=(none) old-ses=4294967295 ses=2 res=1 |
| [ 81.711441] audit: type=1130 audit(1575914210.650:192): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=user-runtime-dir@1000 comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success' |
| [ 81.722517] audit: type=1101 audit(1575914210.664:193): pid=3731 uid=0 auid=4294967295 ses=4294967295 msg='op=PAM:accounting grantors=pam_tally2,pam_access,pam_unix,pam_permit,pam_time acct="gnutoo" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success' |
| [ 81.723325] audit: type=1006 audit(1575914210.664:194): pid=3731 uid=0 old-auid=4294967295 auid=1000 tty=(none) old-ses=4294967295 ses=3 res=1 |
| [ 81.725597] audit: type=1105 audit(1575914210.667:195): pid=3731 uid=0 auid=1000 ses=3 msg='op=PAM:session_open grantors=pam_loginuid,pam_loginuid,pam_keyinit,pam_limits,pam_unix,pam_permit,pam_mail,pam_systemd,pam_env acct="gnutoo" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success' |
| [ 86.962245] kauditd_printk_skb: 4 callbacks suppressed |
| [ 86.962248] audit: type=1130 audit(1575914215.904:200): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=colord comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success' |
| [ 87.512152] audit: type=1130 audit(1575914216.454:201): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=upower comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success' |
| [ 87.936126] audit: type=1130 audit(1575914216.877:202): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=org.cups.cupsd comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success' |
| [ 91.750286] audit: type=1131 audit(1575914220.690:203): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=user@620 comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success' |
| [ 91.770385] audit: type=1131 audit(1575914220.710:204): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=user-runtime-dir@620 comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success' |
| [ 139.067402] audit: type=1101 audit(1575914268.007:205): pid=4040 uid=1000 auid=1000 ses=2 msg='op=PAM:accounting grantors=pam_unix,pam_permit,pam_time acct="gnutoo" exe="/usr/bin/sudo" hostname=? addr=? terminal=/dev/pts/16 res=success' |
| [ 139.068155] audit: type=1110 audit(1575914268.007:206): pid=4040 uid=0 auid=1000 ses=2 msg='op=PAM:setcred grantors=pam_unix,pam_permit,pam_env acct="root" exe="/usr/bin/sudo" hostname=? addr=? terminal=/dev/pts/16 res=success' |
| [ 139.074648] audit: type=1105 audit(1575914268.014:207): pid=4040 uid=0 auid=1000 ses=2 msg='op=PAM:session_open grantors=pam_limits,pam_unix,pam_permit acct="root" exe="/usr/bin/sudo" hostname=? addr=? terminal=/dev/pts/16 res=success' |
| [ 139.083275] audit: type=1100 audit(1575914268.024:208): pid=4041 uid=0 auid=1000 ses=2 msg='op=PAM:authentication grantors=pam_rootok acct="root" exe="/usr/bin/su" hostname=f2a85m-pro addr=? terminal=pts/16 res=success' |
| [ 139.083958] audit: type=1101 audit(1575914268.024:209): pid=4041 uid=0 auid=1000 ses=2 msg='op=PAM:accounting grantors=pam_unix acct="root" exe="/usr/bin/su" hostname=f2a85m-pro addr=? terminal=pts/16 res=success' |
| [ 139.085925] audit: type=1103 audit(1575914268.027:210): pid=4041 uid=0 auid=1000 ses=2 msg='op=PAM:setcred grantors=pam_rootok acct="root" exe="/usr/bin/su" hostname=f2a85m-pro addr=? terminal=pts/16 res=success' |
| [ 139.086548] audit: type=1105 audit(1575914268.027:211): pid=4041 uid=0 auid=1000 ses=2 msg='op=PAM:session_open grantors=pam_unix acct="root" exe="/usr/bin/su" hostname=f2a85m-pro addr=? terminal=pts/16 res=success' |
| [ 147.429146] audit: type=1101 audit(1575914276.370:212): pid=4307 uid=0 auid=1000 ses=2 msg='op=PAM:accounting grantors=pam_unix,pam_permit,pam_time acct="root" exe="/usr/bin/sudo" hostname=? addr=? terminal=/dev/pts/16 res=success' |
| [ 147.429842] audit: type=1110 audit(1575914276.370:213): pid=4307 uid=0 auid=1000 ses=2 msg='op=PAM:setcred grantors=pam_unix,pam_permit,pam_env acct="root" exe="/usr/bin/sudo" hostname=? addr=? terminal=/dev/pts/16 res=success' |
| [ 147.440406] audit: type=1105 audit(1575914276.380:214): pid=4307 uid=0 auid=1000 ses=2 msg='op=PAM:session_open grantors=pam_limits,pam_unix,pam_permit acct="root" exe="/usr/bin/sudo" hostname=? addr=? terminal=/dev/pts/16 res=success' |