blob: 2260a1944f739c6ae9277a6b68a116239ddac631 [file] [log] [blame]
[ 0.000000] Initializing cgroup subsys cpuset
[ 0.000000] Initializing cgroup subsys cpu
[ 0.000000] Initializing cgroup subsys cpuacct
[ 0.000000] Linux version 3.16.0-1-grml-amd64 (team@grml.org) (gcc version 4.8.3 (Debian 4.8.3-13) ) #1 SMP Debian 3.16.7-1+grml.1 (2014-11-05)
[ 0.000000] Command line: initrd=/boot/grml64small/initrd.img boot=live live-media-path=/live/grml64-small/ bootid=grml64small201411 nomce verbose console=ttyS0,115200n8 ssh=remote iomem=relaxed toram=grml64-small.squashfs memory_corruption_check=1 memory_corruption_check_size=512k BOOT_IMAGE=/boot/grml64small/vmlinuz
[ 0.000000] e820: BIOS-provided physical RAM map:
[ 0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009fbff] usable
[ 0.000000] BIOS-e820: [mem 0x000000000009fc00-0x000000000009ffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000000f0000-0x00000000000fffff] reserved
[ 0.000000] BIOS-e820: [mem 0x0000000000100000-0x00000000bfd2cfff] usable
[ 0.000000] BIOS-e820: [mem 0x00000000bfd2d000-0x00000000dfffffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000f8000000-0x00000000fbffffff] reserved
[ 0.000000] BIOS-e820: [mem 0x0000000100000000-0x000000021fffffff] usable
[ 0.000000] NX (Execute Disable) protection: active
[ 0.000000] SMBIOS 2.8 present.
[ 0.000000] DMI: ASROCK IMB-A180/IMB-A180, BIOS 4.11-412-g12a651c 12/13/2019
[ 0.000000] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
[ 0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable
[ 0.000000] AGP: No AGP bridge found
[ 0.000000] e820: last_pfn = 0x220000 max_arch_pfn = 0x400000000
[ 0.000000] MTRR default type: uncachable
[ 0.000000] MTRR fixed ranges enabled:
[ 0.000000] 00000-9FFFF write-back
[ 0.000000] A0000-BFFFF uncachable
[ 0.000000] C0000-FFFFF write-back
[ 0.000000] MTRR variable ranges enabled:
[ 0.000000] 0 base 00FF800000 mask FFFF800000 write-protect
[ 0.000000] 1 base 0080000000 mask FFC0000000 write-back
[ 0.000000] 2 base 0000000000 mask FF80000000 write-back
[ 0.000000] 3 disabled
[ 0.000000] 4 disabled
[ 0.000000] 5 disabled
[ 0.000000] 6 disabled
[ 0.000000] 7 disabled
[ 0.000000] TOM2: 0000000220000000 aka 8704M
[ 0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
[ 0.000000] e820: last_pfn = 0xbfd2d max_arch_pfn = 0x400000000
[ 0.000000] found SMP MP-table at [mem 0x000f60a0-0x000f60af] mapped at [ffff8800000f60a0]
[ 0.000000] Scanning 1 areas for low memory corruption
[ 0.000000] Base memory trampoline at [ffff880000099000] 99000 size 24576
[ 0.000000] Using GB pages for direct mapping
[ 0.000000] init_memory_mapping: [mem 0x00000000-0x000fffff]
[ 0.000000] [mem 0x00000000-0x000fffff] page 4k
[ 0.000000] BRK [0x01af8000, 0x01af8fff] PGTABLE
[ 0.000000] BRK [0x01af9000, 0x01af9fff] PGTABLE
[ 0.000000] BRK [0x01afa000, 0x01afafff] PGTABLE
[ 0.000000] init_memory_mapping: [mem 0x21fe00000-0x21fffffff]
[ 0.000000] [mem 0x21fe00000-0x21fffffff] page 2M
[ 0.000000] BRK [0x01afb000, 0x01afbfff] PGTABLE
[ 0.000000] init_memory_mapping: [mem 0x21c000000-0x21fdfffff]
[ 0.000000] [mem 0x21c000000-0x21fdfffff] page 2M
[ 0.000000] init_memory_mapping: [mem 0x200000000-0x21bffffff]
[ 0.000000] [mem 0x200000000-0x21bffffff] page 2M
[ 0.000000] init_memory_mapping: [mem 0x00100000-0xbfd2cfff]
[ 0.000000] [mem 0x00100000-0x001fffff] page 4k
[ 0.000000] [mem 0x00200000-0x3fffffff] page 2M
[ 0.000000] [mem 0x40000000-0x7fffffff] page 1G
[ 0.000000] [mem 0x80000000-0xbfbfffff] page 2M
[ 0.000000] [mem 0xbfc00000-0xbfd2cfff] page 4k
[ 0.000000] init_memory_mapping: [mem 0x100000000-0x1ffffffff]
[ 0.000000] [mem 0x100000000-0x1ffffffff] page 1G
[ 0.000000] RAMDISK: [mem 0x7e84b000-0x7fffefff]
[ 0.000000] ACPI: Early table checksum verification disabled
[ 0.000000] ACPI: RSDP 0x00000000000F6250 000024 (v02 COREv4)
[ 0.000000] ACPI: XSDT 0x00000000BFD310E0 00005C (v01 COREv4 COREBOOT 00000000 CORE 20190703)
[ 0.000000] ACPI: FACP 0x00000000BFD32960 0000F4 (v04 COREv4 COREBOOT 00000000 CORE 20190703)
[ 0.000000] ACPI: DSDT 0x00000000BFD31280 0016DA (v02 COREv4 COREBOOT 00010001 INTL 20190703)
[ 0.000000] ACPI: FACS 0x00000000BFD31240 000040
[ 0.000000] ACPI: SSDT 0x00000000BFD32A60 00008A (v02 COREv4 COREBOOT 0000002A CORE 20190703)
[ 0.000000] ACPI: APIC 0x00000000BFD32AF0 00006E (v02 COREv4 COREBOOT 00000000 CORE 20190703)
[ 0.000000] ACPI: HEST 0x00000000BFD32B60 0001D0 (v01 COREv4 COREBOOT 00000000 CORE 20190703)
[ 0.000000] ACPI: SSDT 0x00000000BFD32D30 0046D1 (v02 AMD AGESA 00000002 MSFT 04000000)
[ 0.000000] ACPI: SSDT 0x00000000BFD37410 00043C (v01 AMD AGESA 00000001 AMD 00000001)
[ 0.000000] ACPI: HPET 0x00000000BFD37850 000038 (v01 COREv4 COREBOOT 00000000 CORE 20190703)
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] No NUMA configuration found
[ 0.000000] Faking a node at [mem 0x0000000000000000-0x000000021fffffff]
[ 0.000000] Initmem setup node 0 [mem 0x00000000-0x21fffffff]
[ 0.000000] NODE_DATA [mem 0x21fff9000-0x21fffdfff]
[ 0.000000] [ffffea0000000000-ffffea00077fffff] PMD -> [ffff880217e00000-ffff88021e7fffff] on node 0
[ 0.000000] Zone ranges:
[ 0.000000] DMA [mem 0x00001000-0x00ffffff]
[ 0.000000] DMA32 [mem 0x01000000-0xffffffff]
[ 0.000000] Normal [mem 0x100000000-0x21fffffff]
[ 0.000000] Movable zone start for each node
[ 0.000000] Early memory node ranges
[ 0.000000] node 0: [mem 0x00001000-0x0009efff]
[ 0.000000] node 0: [mem 0x00100000-0xbfd2cfff]
[ 0.000000] node 0: [mem 0x100000000-0x21fffffff]
[ 0.000000] On node 0 totalpages: 1965259
[ 0.000000] DMA zone: 56 pages used for memmap
[ 0.000000] DMA zone: 133 pages reserved
[ 0.000000] DMA zone: 3998 pages, LIFO batch:0
[ 0.000000] DMA32 zone: 10687 pages used for memmap
[ 0.000000] DMA32 zone: 781613 pages, LIFO batch:31
[ 0.000000] Normal zone: 16128 pages used for memmap
[ 0.000000] Normal zone: 1179648 pages, LIFO batch:31
[ 0.000000] ACPI: PM-Timer IO Port: 0x818
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled)
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0xff] high edge lint[0x1])
[ 0.000000] ACPI: IOAPIC (id[0x04] address[0xfec00000] gsi_base[0])
[ 0.000000] IOAPIC[0]: apic_id 4, version 33, address 0xfec00000, GSI 0-23
[ 0.000000] ACPI: IOAPIC (id[0x05] address[0xfec20000] gsi_base[24])
[ 0.000000] IOAPIC[1]: apic_id 5, version 33, address 0xfec20000, GSI 24-55
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 low level)
[ 0.000000] ACPI: IRQ0 used by override.
[ 0.000000] ACPI: IRQ2 used by override.
[ 0.000000] ACPI: IRQ9 used by override.
[ 0.000000] Using ACPI (MADT) for SMP configuration information
[ 0.000000] ACPI: HPET id: 0x10228210 base: 0xfed00000
[ 0.000000] smpboot: Allowing 2 CPUs, 0 hotplug CPUs
[ 0.000000] nr_irqs_gsi: 72
[ 0.000000] PM: Registered nosave memory: [mem 0x0009f000-0x0009ffff]
[ 0.000000] PM: Registered nosave memory: [mem 0x000a0000-0x000effff]
[ 0.000000] PM: Registered nosave memory: [mem 0x000f0000-0x000fffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xbfd2d000-0xdfffffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xe0000000-0xf7ffffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xf8000000-0xfbffffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfc000000-0xffffffff]
[ 0.000000] e820: [mem 0xe0000000-0xf7ffffff] available for PCI devices
[ 0.000000] Booting paravirtualized kernel on bare hardware
[ 0.000000] setup_percpu: NR_CPUS:512 nr_cpumask_bits:512 nr_cpu_ids:2 nr_node_ids:1
[ 0.000000] PERCPU: Embedded 28 pages/cpu @ffff88021fc00000 s85824 r8192 d20672 u1048576
[ 0.000000] pcpu-alloc: s85824 r8192 d20672 u1048576 alloc=1*2097152
[ 0.000000] pcpu-alloc: [0] 0 1
[ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 1938255
[ 0.000000] Policy zone: Normal
[ 0.000000] Kernel command line: initrd=/boot/grml64small/initrd.img boot=live live-media-path=/live/grml64-small/ bootid=grml64small201411 nomce verbose console=ttyS0,115200n8 ssh=remote iomem=relaxed toram=grml64-small.squashfs memory_corruption_check=1 memory_corruption_check_size=512k BOOT_IMAGE=/boot/grml64small/vmlinuz
[ 0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes)
[ 0.000000] xsave: enabled xstate_bv 0x7, cntxt size 0x340
[ 0.000000] AGP: Checking aperture...
[ 0.000000] AGP: No AGP bridge found
[ 0.000000] AGP: Node 0: aperture [bus addr 0x00000000-0x01ffffff] (32MB)
[ 0.000000] AGP: Your BIOS doesn't leave a aperture memory hole
[ 0.000000] AGP: Please enable the IOMMU option in the BIOS setup
[ 0.000000] AGP: This costs you 64MB of RAM
[ 0.000000] AGP: Mapping aperture over RAM [mem 0xb4000000-0xb7ffffff] (65536KB)
[ 0.000000] PM: Registered nosave memory: [mem 0xb4000000-0xb7ffffff]
[ 0.000000] Memory: 7584340K/7861036K available (5357K kernel code, 947K rwdata, 1928K rodata, 1220K init, 840K bss, 276696K reserved)
[ 0.000000] Hierarchical RCU implementation.
[ 0.000000] RCU dyntick-idle grace-period acceleration is enabled.
[ 0.000000] RCU restricting CPUs from NR_CPUS=512 to nr_cpu_ids=2.
[ 0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=2
[ 0.000000] NR_IRQS:33024 nr_irqs:512 16
[ 0.000000] Console: colour dummy device 80x25
[ 0.000000] console [ttyS0] enabled
[ 0.000000] hpet clockevent registered
[ 0.000000] tsc: Fast TSC calibration using PIT
[ 0.000000] tsc: Detected 998.159 MHz processor
[ 0.000077] Calibrating delay loop (skipped), value calculated using timer frequency.. 1996.31 BogoMIPS (lpj=3992636)
[ 0.010724] pid_max: default: 32768 minimum: 301
[ 0.015376] ACPI: Core revision 20140424
[ 0.038412] ACPI: All ACPI Tables successfully acquired
[ 0.043776] Security Framework initialized
[ 0.047900] AppArmor: AppArmor disabled by boot time parameter
[ 0.053743] Yama: disabled by default; enable with sysctl kernel.yama.*
[ 0.061893] Dentry cache hash table entries: 1048576 (order: 11, 8388608 bytes)
[ 0.075041] Inode-cache hash table entries: 524288 (order: 10, 4194304 bytes)
[ 0.085094] Mount-cache hash table entries: 16384 (order: 5, 131072 bytes)
[ 0.092022] Mountpoint-cache hash table entries: 16384 (order: 5, 131072 bytes)
[ 0.100060] Initializing cgroup subsys memory
[ 0.104449] Initializing cgroup subsys devices
[ 0.108929] Initializing cgroup subsys freezer
[ 0.113393] Initializing cgroup subsys net_cls
[ 0.117866] Initializing cgroup subsys blkio
[ 0.122161] Initializing cgroup subsys perf_event
[ 0.126877] Initializing cgroup subsys net_prio
[ 0.131488] tseg: 0000000000
[ 0.131502] CPU: Physical Processor ID: 0
[ 0.135525] CPU: Processor Core ID: 0
[ 0.139206] Last level iTLB entries: 4KB 512, 2MB 8, 4MB 4
Last level dTLB entries: 4KB 512, 2MB 256, 4MB 128, 1GB 0
tlb_flushall_shift: 6
[ 0.154648] Freeing SMP alternatives memory: 20K (ffffffff81a1f000 - ffffffff81a24000)
[ 0.165290] ftrace: allocating 22111 entries in 87 pages
[ 0.193323] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=0 pin2=0
[ 0.238866] smpboot: CPU0: AMD E1-2100 APU with Radeon(TM) HD Graphics (fam: 16, model: 00, stepping: 01)
[ 0.352763] Performance Events: AMD PMU driver.
[ 0.357327] ... version: 0
[ 0.361343] ... bit width: 48
[ 0.365441] ... generic registers: 4
[ 0.369455] ... value mask: 0000ffffffffffff
[ 0.374768] ... max period: 00007fffffffffff
[ 0.380081] ... fixed-purpose events: 0
[ 0.384094] ... event mask: 000000000000000f
[ 0.393930] NMI watchdog: enabled on all CPUs, permanently consumes one hw-PMU counter.
[ 0.402287] x86: Booting SMP configuration:
[ 0.406479] .... node #0, CPUs: #1
[ 0.423393] x86: Booted up 1 node, 2 CPUs
[ 0.427614] smpboot: Total of 2 processors activated (3992.63 BogoMIPS)
[ 0.435134] devtmpfs: initialized
[ 0.453941] pinctrl core: initialized pinctrl subsystem
[ 0.459429] NET: Registered protocol family 16
[ 0.464347] cpuidle: using governor ladder
[ 0.468460] cpuidle: using governor menu
[ 0.472599] ACPI: bus type PCI registered
[ 0.476621] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
[ 0.483316] PCI: Using configuration type 1 for base access
[ 0.488892] PCI: Using configuration type 1 for extended access
[ 0.495618] mtrr: your CPUs had inconsistent variable MTRR settings
[ 0.501895] mtrr: probably your BIOS does not setup all CPUs.
[ 0.507646] mtrr: corrected configuration.
[ 0.526070] ACPI: Added _OSI(Module Device)
[ 0.530270] ACPI: Added _OSI(Processor Device)
[ 0.534720] ACPI: Added _OSI(3.0 _SCP Extensions)
[ 0.539425] ACPI: Added _OSI(Processor Aggregator Device)
[ 0.548392] ACPI: Executed 2 blocks of module-level executable AML code
[ 0.565082] ACPI: Interpreter enabled
[ 0.568782] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S2_] (20140424/hwxface-580)
[ 0.578071] ACPI: (supports S0 S1 S3 S4 S5)
[ 0.582263] ACPI: Using IOAPIC for interrupt routing
[ 0.587282] HEST: Table parsing has been initialized.
[ 0.592349] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
[ 0.610405] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
[ 0.616603] acpi PNP0A03:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI]
[ 0.624930] acpi PNP0A03:00: _OSC: OS now controls [PCIeHotplug PME AER PCIeCapability]
[ 0.633172] acpi PNP0A03:00: host bridge window expanded to [io 0x0000-0x0cf7]; [io 0x0000-0x0cf7] ignored
[ 0.643436] PCI host bridge to bus 0000:00
[ 0.647546] pci_bus 0000:00: root bus resource [bus 00-ff]
[ 0.653039] pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7]
[ 0.659226] pci_bus 0000:00: root bus resource [io 0x0d00-0xffff]
[ 0.665416] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff]
[ 0.672298] pci_bus 0000:00: root bus resource [mem 0x000c0000-0x000dffff]
[ 0.679180] pci_bus 0000:00: root bus resource [mem 0xe0000000-0xffffffff]
[ 0.686077] pci 0000:00:00.0: [1022:1536] type 00 class 0x060000
[ 0.686341] pci 0000:00:01.0: [1002:9834] type 00 class 0x030000
[ 0.686370] pci 0000:00:01.0: reg 0x10: [mem 0xe0000000-0xefffffff 64bit pref]
[ 0.686388] pci 0000:00:01.0: reg 0x18: [mem 0xf0000000-0xf07fffff 64bit pref]
[ 0.686402] pci 0000:00:01.0: reg 0x20: [io 0x3000-0x30ff]
[ 0.686416] pci 0000:00:01.0: reg 0x24: [mem 0xf0b00000-0xf0b3ffff]
[ 0.686430] pci 0000:00:01.0: reg 0x30: [mem 0xf0b40000-0xf0b5ffff pref]
[ 0.686494] pci 0000:00:01.0: supports D1 D2
[ 0.686500] pci 0000:00:01.0: PME# supported from D1 D2 D3hot
[ 0.686731] pci 0000:00:01.1: [1002:9840] type 00 class 0x040300
[ 0.686756] pci 0000:00:01.1: reg 0x10: [mem 0xf0b60000-0xf0b63fff 64bit]
[ 0.686851] pci 0000:00:01.1: supports D1 D2
[ 0.687053] pci 0000:00:02.0: [1022:1538] type 00 class 0x060000
[ 0.687298] pci 0000:00:02.3: [1022:1439] type 01 class 0x060400
[ 0.687407] pci 0000:00:02.3: PME# supported from D0 D3hot D3cold
[ 0.687526] pci 0000:00:02.3: System wakeup disabled by ACPI
[ 0.693333] pci 0000:00:02.4: [1022:1439] type 01 class 0x060400
[ 0.693441] pci 0000:00:02.4: PME# supported from D0 D3hot D3cold
[ 0.693558] pci 0000:00:02.4: System wakeup disabled by ACPI
[ 0.699384] pci 0000:00:11.0: [1022:7801] type 00 class 0x010601
[ 0.699411] pci 0000:00:11.0: reg 0x10: [io 0x3410-0x3417]
[ 0.699425] pci 0000:00:11.0: reg 0x14: [io 0x3420-0x3423]
[ 0.699439] pci 0000:00:11.0: reg 0x18: [io 0x3418-0x341f]
[ 0.699453] pci 0000:00:11.0: reg 0x1c: [io 0x3424-0x3427]
[ 0.699467] pci 0000:00:11.0: reg 0x20: [io 0x3400-0x340f]
[ 0.699482] pci 0000:00:11.0: reg 0x24: [mem 0xf0b6b000-0xf0b6b3ff]
[ 0.699536] pci 0000:00:11.0: PME# supported from D3hot
[ 0.699765] pci 0000:00:12.0: [1022:7807] type 00 class 0x0c0310
[ 0.699792] pci 0000:00:12.0: reg 0x10: [mem 0xf0b68000-0xf0b68fff]
[ 0.699989] pci 0000:00:12.0: System wakeup disabled by ACPI
[ 0.705794] pci 0000:00:12.2: [1022:7808] type 00 class 0x0c0320
[ 0.705823] pci 0000:00:12.2: reg 0x10: [mem 0xf0b6c000-0xf0b6c0ff]
[ 0.705925] pci 0000:00:12.2: supports D1 D2
[ 0.705931] pci 0000:00:12.2: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.706041] pci 0000:00:12.2: System wakeup disabled by ACPI
[ 0.711856] pci 0000:00:13.0: [1022:7807] type 00 class 0x0c0310
[ 0.711883] pci 0000:00:13.0: reg 0x10: [mem 0xf0b69000-0xf0b69fff]
[ 0.712077] pci 0000:00:13.0: System wakeup disabled by ACPI
[ 0.717882] pci 0000:00:13.2: [1022:7808] type 00 class 0x0c0320
[ 0.717911] pci 0000:00:13.2: reg 0x10: [mem 0xf0b6d000-0xf0b6d0ff]
[ 0.718013] pci 0000:00:13.2: supports D1 D2
[ 0.718019] pci 0000:00:13.2: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.718128] pci 0000:00:13.2: System wakeup disabled by ACPI
[ 0.723928] pci 0000:00:14.0: [1022:780b] type 00 class 0x0c0500
[ 0.724200] pci 0000:00:14.2: [1022:780d] type 00 class 0x040300
[ 0.724232] pci 0000:00:14.2: reg 0x10: [mem 0xf0b64000-0xf0b67fff 64bit]
[ 0.724320] pci 0000:00:14.2: PME# supported from D0 D3hot D3cold
[ 0.724541] pci 0000:00:14.3: [1022:780e] type 00 class 0x060100
[ 0.724828] pci 0000:00:14.7: [1022:7813] type 00 class 0x080501
[ 0.724853] pci 0000:00:14.7: reg 0x10: [mem 0xf0b6e000-0xf0b6e0ff 64bit]
[ 0.725108] pci 0000:00:16.0: [1022:7807] type 00 class 0x0c0310
[ 0.725134] pci 0000:00:16.0: reg 0x10: [mem 0xf0b6a000-0xf0b6afff]
[ 0.725332] pci 0000:00:16.0: System wakeup disabled by ACPI
[ 0.731135] pci 0000:00:16.2: [1022:7808] type 00 class 0x0c0320
[ 0.731164] pci 0000:00:16.2: reg 0x10: [mem 0xf0b6f000-0xf0b6f0ff]
[ 0.731266] pci 0000:00:16.2: supports D1 D2
[ 0.731272] pci 0000:00:16.2: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.731381] pci 0000:00:16.2: System wakeup disabled by ACPI
[ 0.737184] pci 0000:00:18.0: [1022:1530] type 00 class 0x060000
[ 0.737403] pci 0000:00:18.1: [1022:1531] type 00 class 0x060000
[ 0.737617] pci 0000:00:18.2: [1022:1532] type 00 class 0x060000
[ 0.737832] pci 0000:00:18.3: [1022:1533] type 00 class 0x060000
[ 0.738055] pci 0000:00:18.4: [1022:1534] type 00 class 0x060000
[ 0.738272] pci 0000:00:18.5: [1022:1535] type 00 class 0x060000
[ 0.738629] pci 0000:01:00.0: [10ec:8168] type 00 class 0x020000
[ 0.738657] pci 0000:01:00.0: reg 0x10: [io 0x1000-0x10ff]
[ 0.738693] pci 0000:01:00.0: reg 0x18: [mem 0xf090c000-0xf090cfff 64bit]
[ 0.738718] pci 0000:01:00.0: reg 0x20: [mem 0xf0800000-0xf0803fff 64bit pref]
[ 0.738832] pci 0000:01:00.0: supports D1 D2
[ 0.738838] pci 0000:01:00.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.739013] pci 0000:01:00.1: [10ec:816a] type 00 class 0x070002
[ 0.739041] pci 0000:01:00.1: reg 0x10: [io 0x1400-0x14ff]
[ 0.739076] pci 0000:01:00.1: reg 0x18: [mem 0xf090d000-0xf090dfff 64bit]
[ 0.739100] pci 0000:01:00.1: reg 0x20: [mem 0xf0900000-0xf0903fff 64bit]
[ 0.739197] pci 0000:01:00.1: supports D1 D2
[ 0.739202] pci 0000:01:00.1: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.739373] pci 0000:01:00.2: [10ec:816b] type 00 class 0x070002
[ 0.739401] pci 0000:01:00.2: reg 0x10: [io 0x1800-0x18ff]
[ 0.739436] pci 0000:01:00.2: reg 0x18: [mem 0xf090e000-0xf090efff 64bit]
[ 0.739460] pci 0000:01:00.2: reg 0x20: [mem 0xf0904000-0xf0907fff 64bit]
[ 0.739557] pci 0000:01:00.2: supports D1 D2
[ 0.739563] pci 0000:01:00.2: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.739733] pci 0000:01:00.3: [10ec:816c] type 00 class 0x0c0701
[ 0.739761] pci 0000:01:00.3: reg 0x10: [io 0x1c00-0x1cff]
[ 0.739796] pci 0000:01:00.3: reg 0x18: [mem 0xf090f000-0xf090f0ff 64bit]
[ 0.739820] pci 0000:01:00.3: reg 0x20: [mem 0xf0908000-0xf090bfff 64bit]
[ 0.739916] pci 0000:01:00.3: supports D1 D2
[ 0.739922] pci 0000:01:00.3: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.744813] pci 0000:00:02.3: PCI bridge to [bus 01]
[ 0.749797] pci 0000:00:02.3: bridge window [io 0x1000-0x1fff]
[ 0.749805] pci 0000:00:02.3: bridge window [mem 0xf0900000-0xf09fffff]
[ 0.749817] pci 0000:00:02.3: bridge window [mem 0xf0800000-0xf08fffff 64bit pref]
[ 0.749967] pci 0000:02:00.0: [10ec:8168] type 00 class 0x020000
[ 0.749995] pci 0000:02:00.0: reg 0x10: [io 0x2000-0x20ff]
[ 0.750031] pci 0000:02:00.0: reg 0x18: [mem 0xf0a04000-0xf0a04fff 64bit pref]
[ 0.750055] pci 0000:02:00.0: reg 0x20: [mem 0xf0a00000-0xf0a03fff 64bit pref]
[ 0.750167] pci 0000:02:00.0: supports D1 D2
[ 0.750173] pci 0000:02:00.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.756795] pci 0000:00:02.4: PCI bridge to [bus 02]
[ 0.761776] pci 0000:00:02.4: bridge window [io 0x2000-0x2fff]
[ 0.761789] pci 0000:00:02.4: bridge window [mem 0xf0a00000-0xf0afffff 64bit pref]
[ 0.762357] ACPI: PCI Interrupt Link [INTA] (IRQs *3 4 5 7 10 11 12 15)
[ 0.769303] ACPI: PCI Interrupt Link [INTB] (IRQs 3 *4 5 7 10 11 12 15)
[ 0.776237] ACPI: PCI Interrupt Link [INTC] (IRQs 3 4 *5 7 10 11 12 15)
[ 0.783169] ACPI: PCI Interrupt Link [INTD] (IRQs 3 4 5 *7 10 11 12 15)
[ 0.790109] ACPI: PCI Interrupt Link [INTE] (IRQs 3 4 5 7 10 *11 12 15)
[ 0.797042] ACPI: PCI Interrupt Link [INTF] (IRQs 9) *10
[ 0.802567] ACPI: PCI Interrupt Link [INTG] (IRQs 3 4 5 7 10 11 12 15) *0
[ 0.809699] ACPI: PCI Interrupt Link [INTH] (IRQs 3 4 5 7 10 11 12 15) *0
[ 0.816990] ACPI: Enabled 5 GPEs in block 00 to 1F
[ 0.822169] vgaarb: setting as boot device: PCI:0000:00:01.0
[ 0.827826] vgaarb: device added: PCI:0000:00:01.0,decodes=io+mem,owns=io+mem,locks=none
[ 0.835932] vgaarb: loaded
[ 0.838650] vgaarb: bridge control possible 0000:00:01.0
[ 0.844148] PCI: Using ACPI for IRQ routing
[ 0.848345] PCI: pci_cache_line_size set to 64 bytes
[ 0.848446] e820: reserve RAM buffer [mem 0x0009fc00-0x0009ffff]
[ 0.848453] e820: reserve RAM buffer [mem 0xbfd2d000-0xbfffffff]
[ 0.848980] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0
[ 0.853935] hpet0: 3 comparators, 32-bit 14.318180 MHz counter
[ 0.861854] Switched to clocksource hpet
[ 0.882729] pnp: PnP ACPI init
[ 0.885838] ACPI: bus type PNP registered
[ 0.890320] system 00:00: [mem 0xfec10002-0xfec11001] has been reserved
[ 0.896964] system 00:00: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.897083] pnp 00:01: Plug and Play ACPI device, IDs PNP0b00 (active)
[ 0.897462] pnp: PnP ACPI: found 2 devices
[ 0.901574] ACPI: bus type PNP unregistered
[ 0.917397] pci 0000:00:02.3: PCI bridge to [bus 01]
[ 0.922383] pci 0000:00:02.3: bridge window [io 0x1000-0x1fff]
[ 0.928494] pci 0000:00:02.3: bridge window [mem 0xf0900000-0xf09fffff]
[ 0.935297] pci 0000:00:02.3: bridge window [mem 0xf0800000-0xf08fffff 64bit pref]
[ 0.943047] pci 0000:00:02.4: PCI bridge to [bus 02]
[ 0.948019] pci 0000:00:02.4: bridge window [io 0x2000-0x2fff]
[ 0.954127] pci 0000:00:02.4: bridge window [mem 0xf0a00000-0xf0afffff 64bit pref]
[ 0.961883] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7]
[ 0.961889] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff]
[ 0.961896] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff]
[ 0.961902] pci_bus 0000:00: resource 7 [mem 0x000c0000-0x000dffff]
[ 0.961908] pci_bus 0000:00: resource 8 [mem 0xe0000000-0xffffffff]
[ 0.961915] pci_bus 0000:01: resource 0 [io 0x1000-0x1fff]
[ 0.961920] pci_bus 0000:01: resource 1 [mem 0xf0900000-0xf09fffff]
[ 0.961927] pci_bus 0000:01: resource 2 [mem 0xf0800000-0xf08fffff 64bit pref]
[ 0.961933] pci_bus 0000:02: resource 0 [io 0x2000-0x2fff]
[ 0.961940] pci_bus 0000:02: resource 2 [mem 0xf0a00000-0xf0afffff 64bit pref]
[ 0.962056] NET: Registered protocol family 2
[ 0.967121] TCP established hash table entries: 65536 (order: 7, 524288 bytes)
[ 0.974884] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
[ 0.982048] TCP: Hash tables configured (established 65536 bind 65536)
[ 0.988690] TCP: reno registered
[ 0.991967] UDP hash table entries: 4096 (order: 5, 131072 bytes)
[ 0.998169] UDP-Lite hash table entries: 4096 (order: 5, 131072 bytes)
[ 1.004977] NET: Registered protocol family 1
[ 1.009393] pci 0000:00:01.0: Video device with shadowed ROM
[ 1.012023] PCI: CLS 64 bytes, default 64
[ 1.012173] Unpacking initramfs...
[ 9.021054] Freeing initrd memory: 24272K (ffff88007e84b000 - ffff88007ffff000)
[ 9.028411] PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
[ 9.034860] software IO TLB [mem 0xbbd2d000-0xbfd2d000] (64MB) mapped at [ffff8800bbd2d000-ffff8800bfd2cfff]
[ 9.045098] perf: AMD NB counters detected
[ 9.049215] perf: AMD L2I counters detected
[ 9.053544] microcode: CPU0: patch_level=0x07000110
[ 9.058452] microcode: CPU1: patch_level=0x07000110
[ 9.063488] microcode: Microcode Update Driver: v2.00 <tigran@aivazian.fsnet.co.uk>, Peter Oruba
[ 9.072293] LVT offset 0 assigned for vector 0x400
[ 9.077113] perf: AMD IBS detected (0x000000ff)
[ 9.081725] Scanning for low memory corruption every 60 seconds
[ 9.088679] futex hash table entries: 512 (order: 3, 32768 bytes)
[ 9.094855] audit: initializing netlink subsys (disabled)
[ 9.100308] audit: type=2000 audit(1576198920.852:1): initialized
[ 9.107475] HugeTLB registered 2 MB page size, pre-allocated 0 pages
[ 9.113934] zbud: loaded
[ 9.116942] VFS: Disk quotas dquot_6.5.2
[ 9.120920] Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[ 9.127463] squashfs: version 4.0 (2009/01/31) Phillip Lougher
[ 9.133494] aufs 3.16-20140908
[ 9.136583] msgmni has been set to 14860
[ 9.141434] alg: No test for stdrng (krng)
[ 9.145624] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252)
[ 9.153160] io scheduler noop registered
[ 9.157102] io scheduler deadline registered
[ 9.161489] io scheduler cfq registered (default)
[ 9.166434] pcieport 0000:00:02.3: device [1022:1439] has invalid IRQ; check vendor BIOS
[ 9.174777] pcieport 0000:00:02.3: irq 72 for MSI/MSI-X
[ 9.174923] pcieport 0000:00:02.4: device [1022:1439] has invalid IRQ; check vendor BIOS
[ 9.183196] pcieport 0000:00:02.4: irq 73 for MSI/MSI-X
[ 9.183426] pcieport 0000:00:02.3: Signaling PME through PCIe PME interrupt
[ 9.190397] pci 0000:01:00.0: Signaling PME through PCIe PME interrupt
[ 9.196929] pci 0000:01:00.1: Signaling PME through PCIe PME interrupt
[ 9.203464] pci 0000:01:00.2: Signaling PME through PCIe PME interrupt
[ 9.210005] pci 0000:01:00.3: Signaling PME through PCIe PME interrupt
[ 9.216544] pcie_pme 0000:00:02.3:pcie01: service driver pcie_pme loaded
[ 9.216596] pcieport 0000:00:02.4: Signaling PME through PCIe PME interrupt
[ 9.223578] pci 0000:02:00.0: Signaling PME through PCIe PME interrupt
[ 9.230113] pcie_pme 0000:00:02.4:pcie01: service driver pcie_pme loaded
[ 9.230176] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[ 9.235808] pciehp: PCI Express Hot Plug Controller Driver version: 0.4
[ 9.242710] GHES: Failed to enable APEI firmware first mode.
[ 9.248613] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
[ 9.275349] serial8250: ttyS0 at I/O 0x3f8 (irq = 4, base_baud = 115200) is a 16550A
[ 9.303604] serial8250: ttyS1 at I/O 0x2f8 (irq = 3, base_baud = 115200) is a 16550A
[ 9.331841] serial8250: ttyS2 at I/O 0x3e8 (irq = 4, base_baud = 115200) is a 16550A
[ 9.360072] serial8250: ttyS3 at I/O 0x2e8 (irq = 3, base_baud = 115200) is a 16550A
[ 9.368714] Linux agpgart interface v0.103
[ 9.373093] i8042: PNP: No PS/2 controller found. Probing ports directly.
[ 9.385904] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 9.390897] serio: i8042 AUX port at 0x60,0x64 irq 12
[ 9.396318] mousedev: PS/2 mouse device common for all mice
[ 9.402038] rtc_cmos 00:01: RTC can wake from S4
[ 9.406911] rtc_cmos 00:01: rtc core: registered rtc_cmos as rtc0
[ 9.413054] rtc_cmos 00:01: alarms up to one day, 114 bytes nvram, hpet irqs
[ 9.420170] ledtrig-cpu: registered to indicate activity on CPUs
[ 9.426525] AMD IOMMUv2 driver by Joerg Roedel <joerg.roedel@amd.com>
[ 9.432976] AMD IOMMUv2 functionality not available on this system
[ 9.439442] TCP: cubic registered
[ 9.442849] NET: Registered protocol family 10
[ 9.447863] mip6: Mobile IPv6
[ 9.450844] NET: Registered protocol family 17
[ 9.455326] mpls_gso: MPLS GSO support
[ 9.459097] mce: Unable to init device /dev/mcelog (rc: -5)
[ 9.465227] registered taskstats version 1
[ 9.493924] rtc_cmos 00:01: setting system clock to 2019-12-13 01:02:02 UTC (1576198922)
[ 9.502168] PM: Hibernation image not present or could not be loaded.
[ 9.518010] Freeing unused kernel memory: 1220K (ffffffff818ee000 - ffffffff81a1f000)
[ 9.525867] Write protecting the kernel read-only data: 8192k
[ 9.553061] Freeing unused kernel memory: 776K (ffff88000153e000 - ffff880001600000)
[ 9.599534] Freeing unused kernel memory: 120K (ffff8800017e2000 - ffff880001800000)
[ 9.645993] systemd-udevd[66]: starting version 215
[ 9.652681] random: systemd-udevd urandom read with 4 bits of entropy available
[ 9.682454] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input2
[ 9.695959] [drm] Initialized drm 1.1.0 20060810
[ 9.700898] ACPI: Power Button [PWRB]
[ 9.704965] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input3
[ 9.722417] SCSI subsystem initialized
[ 9.723163] ACPI: Power Button [PWRF]
[ 9.736624] ACPI: bus type USB registered
[ 9.736778] [drm] radeon kernel modesetting enabled.
[ 9.738978] [drm] initializing kernel modesetting (KABINI 0x1002:0x9834 0x1002:0x9834).
[ 9.739007] [drm] register mmio base: 0xF0B00000
[ 9.739008] [drm] register mmio size: 262144
[ 9.739015] [drm] doorbell mmio base: 0xF0000000
[ 9.739017] [drm] doorbell mmio size: 8388608
[ 9.739046] radeon 0000:00:01.0: Invalid ROM contents
[ 9.739060] [drm:radeon_get_bios] *ERROR* Unable to locate a BIOS ROM
[ 9.739064] radeon 0000:00:01.0: Fatal error during GPU init
[ 9.739069] [drm] radeon: finishing device.
[ 9.739072] [TTM] Memory type 2 has not been initialized
[ 9.798224] usbcore: registered new interface driver usbfs
[ 9.798348] r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded
[ 9.798695] r8169 0000:01:00.0: irq 74 for MSI/MSI-X
[ 9.799164] r8169 0000:01:00.0 eth0: RTL8168dp/8111dp at 0xffffc90000e2c000, bc:5f:f4:bc:13:8f, XID 08b00000 IRQ 74
[ 9.799169] r8169 0000:01:00.0 eth0: jumbo features [frames: 9200 bytes, tx checksumming: ko]
[ 9.799610] radeon: probe of 0000:00:01.0 failed with error -22
[ 9.834887] libata version 3.00 loaded.
[ 9.837440] ahci 0000:00:11.0: version 3.0
[ 9.837788] ahci 0000:00:11.0: AHCI 0001.0300 32 slots 2 ports 6 Gbps 0x3 impl SATA mode
[ 9.845916] ahci 0000:00:11.0: flags: 64bit ncq sntf ilck led clo pmp pio deso sadm sds
[ 9.856794] scsi0 : ahci
[ 9.859660] scsi1 : ahci
[ 9.862361] ata1: SATA max UDMA/133 abar m1024@0xf0b6b000 port 0xf0b6b100 irq 19
[ 9.869795] ata2: SATA max UDMA/133 abar m1024@0xf0b6b000 port 0xf0b6b180 irq 19
[ 9.878762] sdhci: Secure Digital Host Controller Interface driver
[ 9.884968] sdhci: Copyright(c) Pierre Ossman
[ 9.890672] sdhci-pci 0000:00:14.7: SDHCI controller found [1022:7813] (rev 1)
[ 9.898427] mmc0: no vqmmc regulator found
[ 9.902544] mmc0: no vmmc regulator found
[ 9.906890] mmc0: SDHCI controller on PCI [0000:00:14.7] using ADMA
[ 9.913775] usbcore: registered new interface driver hub
[ 9.919511] usbcore: registered new device driver usb
[ 9.926284] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 9.936354] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[ 9.943089] ehci-pci: EHCI PCI platform driver
[ 9.949052] ehci-pci 0000:00:12.2: EHCI Host Controller
[ 9.954749] ehci-pci 0000:00:12.2: new USB bus registered, assigned bus number 1
[ 9.963657] ehci-pci 0000:00:12.2: applying AMD SB700/SB800/Hudson-2/3 EHCI dummy qh workaround
[ 9.972395] ehci-pci 0000:00:12.2: debug port 1
[ 9.977450] ehci-pci 0000:00:12.2: irq 17, io mem 0xf0b6c000
[ 9.995201] ehci-pci 0000:00:12.2: USB 2.0 started, EHCI 1.00
[ 10.001114] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
[ 10.007916] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 10.015152] usb usb1: Product: EHCI Host Controller
[ 10.015277] r8169 0000:01:00.0 eth0: rtl_ocp_read_cond == 0 (loop: 10, delay: 10).
[ 10.015343] r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded
[ 10.015710] r8169 0000:02:00.0: irq 75 for MSI/MSI-X
[ 10.016215] r8169 0000:02:00.0 eth1: RTL8168evl/8111evl at 0xffffc90000e54000, bc:5f:f4:bc:13:98, XID 0c900800 IRQ 75
[ 10.016220] r8169 0000:02:00.0 eth1: jumbo features [frames: 9200 bytes, tx checksumming: ko]
[ 10.052300] usb usb1: Manufacturer: Linux 3.16.0-1-grml-amd64 ehci_hcd
[ 10.058836] usb usb1: SerialNumber: 0000:00:12.2
[ 10.058863] tsc: Refined TSC clocksource calibration: 998.191 MHz
[ 10.070031] hub 1-0:1.0: USB hub found
[ 10.073816] hub 1-0:1.0: 4 ports detected
[ 10.078464] ehci-pci 0000:00:13.2: EHCI Host Controller
[ 10.083717] ehci-pci 0000:00:13.2: new USB bus registered, assigned bus number 2
[ 10.091127] ehci-pci 0000:00:13.2: applying AMD SB700/SB800/Hudson-2/3 EHCI dummy qh workaround
[ 10.099862] ehci-pci 0000:00:13.2: debug port 1
[ 10.104470] ehci-pci 0000:00:13.2: irq 17, io mem 0xf0b6d000
[ 10.119198] ehci-pci 0000:00:13.2: USB 2.0 started, EHCI 1.00
[ 10.125089] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002
[ 10.131888] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 10.139111] usb usb2: Product: EHCI Host Controller
[ 10.144002] usb usb2: Manufacturer: Linux 3.16.0-1-grml-amd64 ehci_hcd
[ 10.150535] usb usb2: SerialNumber: 0000:00:13.2
[ 10.155512] hub 2-0:1.0: USB hub found
[ 10.159298] hub 2-0:1.0: 4 ports detected
[ 10.163861] ehci-pci 0000:00:16.2: EHCI Host Controller
[ 10.169107] ehci-pci 0000:00:16.2: new USB bus registered, assigned bus number 3
[ 10.176595] ehci-pci 0000:00:16.2: applying AMD SB700/SB800/Hudson-2/3 EHCI dummy qh workaround
[ 10.185315] ehci-pci 0000:00:16.2: debug port 1
[ 10.189901] ehci-pci 0000:00:16.2: irq 17, io mem 0xf0b6f000
[ 10.207210] ehci-pci 0000:00:16.2: USB 2.0 started, EHCI 1.00
[ 10.207230] ata1: SATA link down (SStatus 0 SControl 300)
[ 10.207297] ata2: SATA link down (SStatus 0 SControl 300)
[ 10.223879] usb usb3: New USB device found, idVendor=1d6b, idProduct=0002
[ 10.230690] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 10.237919] usb usb3: Product: EHCI Host Controller
[ 10.242807] usb usb3: Manufacturer: Linux 3.16.0-1-grml-amd64 ehci_hcd
[ 10.249345] usb usb3: SerialNumber: 0000:00:16.2
[ 10.254376] hub 3-0:1.0: USB hub found
[ 10.258164] hub 3-0:1.0: 2 ports detected
[ 10.263266] ohci-pci: OHCI PCI platform driver
[ 10.268006] ohci-pci 0000:00:12.0: OHCI PCI host controller
[ 10.273614] ohci-pci 0000:00:12.0: new USB bus registered, assigned bus number 4
[ 10.281095] ohci-pci 0000:00:12.0: irq 18, io mem 0xf0b68000
[ 10.343326] usb usb4: New USB device found, idVendor=1d6b, idProduct=0001
[ 10.350128] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 10.357354] usb usb4: Product: OHCI PCI host controller
[ 10.362589] usb usb4: Manufacturer: Linux 3.16.0-1-grml-amd64 ohci_hcd
[ 10.369123] usb usb4: SerialNumber: 0000:00:12.0
[ 10.374136] hub 4-0:1.0: USB hub found
[ 10.377923] hub 4-0:1.0: 4 ports detected
[ 10.382520] ohci-pci 0000:00:13.0: OHCI PCI host controller
[ 10.388113] ohci-pci 0000:00:13.0: new USB bus registered, assigned bus number 5
[ 10.395562] ohci-pci 0000:00:13.0: irq 18, io mem 0xf0b69000
[ 10.459324] usb usb5: New USB device found, idVendor=1d6b, idProduct=0001
[ 10.466122] usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 10.473348] usb usb5: Product: OHCI PCI host controller
[ 10.478581] usb usb5: Manufacturer: Linux 3.16.0-1-grml-amd64 ohci_hcd
[ 10.485125] usb usb5: SerialNumber: 0000:00:13.0
[ 10.485159] usb 2-1: new high-speed USB device number 2 using ehci-pci
[ 10.496661] hub 5-0:1.0: USB hub found
[ 10.500460] hub 5-0:1.0: 4 ports detected
[ 10.505034] ohci-pci 0000:00:16.0: OHCI PCI host controller
[ 10.510655] ohci-pci 0000:00:16.0: new USB bus registered, assigned bus number 6
[ 10.518105] ohci-pci 0000:00:16.0: irq 18, io mem 0xf0b6a000
[ 10.583336] usb usb6: New USB device found, idVendor=1d6b, idProduct=0001
[ 10.590134] usb usb6: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 10.597358] usb usb6: Product: OHCI PCI host controller
[ 10.602594] usb usb6: Manufacturer: Linux 3.16.0-1-grml-amd64 ohci_hcd
[ 10.609132] usb usb6: SerialNumber: 0000:00:16.0
[ 10.614146] hub 6-0:1.0: USB hub found
[ 10.617935] hub 6-0:1.0: 2 ports detected
[ 10.632048] usb 2-1: New USB device found, idVendor=0457, idProduct=0151
[ 10.638813] usb 2-1: New USB device strings: Mfr=0, Product=2, SerialNumber=3
[ 10.645966] usb 2-1: Product: USB Mass Storage Device
[ 10.651095] usb 2-1: SerialNumber: 9875c6f37f77ae
[ 10.658200] device-mapper: uevent: version 1.0.3
[ 10.664131] device-mapper: ioctl: 4.27.0-ioctl (2013-10-30) initialised: dm-devel@redhat.com
[ 10.672939] usb-storage 2-1:1.0: USB Mass Storage device detected
[ 10.679783] usb-storage 2-1:1.0: Quirks match for vid 0457 pid 0151: 80
[ 10.686513] scsi2 : usb-storage 2-1:1.0
[ 10.690815] usbcore: registered new interface driver usb-storage
[ 10.767337] usb 2-4: new high-speed USB device number 3 using ehci-pci
[ 11.055446] Switched to clocksource tsc
[ 11.688855] scsi 2:0:0:0: Direct-Access JetFlash TS4GJF2A/120 0.00 PQ: 0 ANSI: 2
[ 11.702216] sd 2:0:0:0: [sda] 8028160 512-byte logical blocks: (4.11 GB/3.82 GiB)
[ 11.710455] sd 2:0:0:0: [sda] Write Protect is off
[ 11.715260] sd 2:0:0:0: [sda] Mode Sense: 00 00 00 00
[ 11.715955] sd 2:0:0:0: [sda] Asking for cache data failed
[ 11.721471] sd 2:0:0:0: [sda] Assuming drive cache: write through
[ 11.731476] sda: sda1
[ 11.736702] sd 2:0:0:0: [sda] Attached SCSI removable disk
[ 11.744839] sd 2:0:0:0: Attached scsi generic sg0 type 0
[ 11.991001] FAT-fs (sda1): utf8 is not a recommended IO charset for FAT filesystems, filesystem will be case sensitive!
[ 13.226729] random: nonblocking pool is initialized
[ 25.885471] usb 2-4: device descriptor read/64, error -110
[ 27.618181] loop: module loaded
[ 27.656204] loop0: unknown partition table
[ 41.107581] usb 2-4: device descriptor read/64, error -110
[ 41.327593] usb 2-4: new high-speed USB device number 4 using ehci-pci
[ 56.445719] usb 2-4: device descriptor read/64, error -110
[ 71.667878] usb 2-4: device descriptor read/64, error -110
[ 71.887893] usb 2-4: new high-speed USB device number 5 using ehci-pci
[ 82.301339] usb 2-4: device not accepting address 5, error -110
[ 82.417371] usb 2-4: new high-speed USB device number 6 using ehci-pci
[ 92.830828] usb 2-4: device not accepting address 6, error -110
[ 92.836800] usb usb2-port4: unable to enumerate USB device
[ 93.138901] usb 5-4: new full-speed USB device number 2 using ohci-pci
[ 94.716075] FS-Cache: Loaded
[ 94.737301] 9pnet: Installing 9P2000 support
[ 94.755004] 9p: Installing v9fs 9p2000 file system support
[ 94.760535] FS-Cache: Netfs '9p' registered for caching
[ 99.408251] systemd-udevd[595]: starting version 215
[ 99.965813] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[ 99.985901] ACPI: acpi_idle registered with cpuidle
[ 100.057024] acpi-cpufreq: overriding BIOS provided _PSD data
[ 100.130215] snd_hda_intel 0000:00:01.1: irq 76 for MSI/MSI-X
[ 100.131171] snd_hda_intel 0000:00:14.2: irq 77 for MSI/MSI-X
[ 100.169178] piix4_smbus 0000:00:14.0: SMBus Host Controller at 0xb00, revision 0
[ 100.182600] EDAC MC: Ver: 3.0.0
[ 100.196712] MCE: In-kernel MCE decoding enabled.
[ 100.208000] piix4_smbus 0000:00:14.0: Auxiliary SMBus Host Controller at 0xb20
[ 100.275410] ipmi message handler version 39.2
[ 100.300870] sound hdaudioC1D0: ALC662 rev1: SKU not ready 0x411111f0
[ 100.307615] sound hdaudioC1D0: autoconfig: line_outs=1 (0x14/0x0/0x0/0x0/0x0) type:line
[ 100.315651] sound hdaudioC1D0: speaker_outs=1 (0x15/0x0/0x0/0x0/0x0)
[ 100.322278] sound hdaudioC1D0: hp_outs=0 (0x0/0x0/0x0/0x0/0x0)
[ 100.328390] sound hdaudioC1D0: mono: mono_out=0x0
[ 100.333381] sound hdaudioC1D0: inputs:
[ 100.356611] sound hdaudioC1D0: Mic=0x18
[ 100.361199] input: HD-Audio Generic HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:01.1/sound/card0/input4
[ 100.376826] AMD64 EDAC driver v3.4.0
[ 100.405743] input: HD-Audio Generic HDMI/DP,pcm=7 as /devices/pci0000:00/0000:00:01.1/sound/card0/input5
[ 100.415337] EDAC amd64: DRAM ECC disabled.
[ 100.419483] EDAC amd64: NB MCE bank disabled, set MSR 0x0000017b[4] on node 0 to enable.
[ 100.427602] EDAC amd64: ECC disabled in the BIOS or no ECC capability, module will not load.
Either enable ECC checking or force module loading by setting 'ecc_enable_override'.
(Note that use of the override may cause unknown side effects.)
[ 100.452235] input: HDA Digital PCBeep as /devices/pci0000:00/0000:00:14.2/sound/card1/hdaudioC1D0/input6
[ 100.480468] input: PC Speaker as /devices/platform/pcspkr/input/input9
[ 100.484894] input: HD-Audio Generic Mic as /devices/pci0000:00/0000:00:14.2/sound/card1/input7
[ 100.485089] input: HD-Audio Generic Line Out as /devices/pci0000:00/0000:00:14.2/sound/card1/input8
[ 100.505892] IPMI System Interface driver.
[ 100.510104] ipmi_si 0000:01:00.3: probing via PCI
[ 100.514974] ipmi_si 0000:01:00.3: [io 0x1c00-0x1cff] regsize 1 spacing 1 irq 35
[ 100.522379] ipmi_si: Adding PCI-specified kcs state machine
[ 100.528100] ipmi_si: Trying PCI-specified kcs state machine at i/o address 0x1c00, slave address 0x0, irq 35
[ 100.990151] AVX version of gcm_enc/dec engaged.
[ 101.018034] alg: No test for __gcm-aes-aesni (__driver-gcm-aes-aesni)
[ 101.223605] alg: No test for crc32 (crc32-pclmul)
[ 101.329740] kvm: Nested Virtualization enabled
[ 101.334958] kvm: Nested Paging enabled
[ 108.281035] usb 5-4: device descriptor read/64, error -110
[ 123.527193] usb 5-4: device descriptor read/64, error -110
[ 123.771212] usb 5-4: new full-speed USB device number 3 using ohci-pci
[ 138.913368] usb 5-4: device descriptor read/64, error -110
[ 151.007012] ipmi_si: There appears to be no BMC at this location
[ 154.159501] usb 5-4: device descriptor read/64, error -110
[ 154.403552] usb 5-4: new full-speed USB device number 4 using ohci-pci
[ 164.816975] usb 5-4: device not accepting address 4, error -110
[ 164.957004] usb 5-4: new full-speed USB device number 5 using ohci-pci
[ 175.370461] usb 5-4: device not accepting address 5, error -110
[ 175.376499] usb usb5-port4: unable to enumerate USB device
[ 177.560201] r8169 0000:01:00.0 eth0: link down
[ 177.564787] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 177.732843] r8169 0000:02:00.0 eth1: link down
[ 177.737408] IPv6: ADDRCONF(NETDEV_UP): eth1: link is not ready
[ 178.034857] RPC: Registered named UNIX socket transport module.
[ 178.040805] RPC: Registered udp transport module.
[ 178.045522] RPC: Registered tcp transport module.
[ 178.050243] RPC: Registered tcp NFSv4.1 backchannel transport module.
[ 178.119471] FS-Cache: Netfs 'nfs' registered for caching
[ 178.234618] Installing knfsd (copyright (C) 1996 okir@monad.swb.de).
[ 184.703916] fuse init (API version 7.23)
[ 3695.950809] r8169 0000:02:00.0 eth1: link up
[ 3695.950842] IPv6: ADDRCONF(NETDEV_CHANGE): eth1: link becomes ready