| [ 0.000000] Linux version 5.19.17 (root@z-mp.slackware.lan) (gcc (GCC) 12.2.0, GNU ld version 2.39-slack151) #1 SMP PREEMPT_DYNAMIC Mon Oct 24 13:00:29 CDT 2022 |
| [ 0.000000] Command line: BOOT_IMAGE=(hd0,gpt2)/boot/generic load_ramdisk=1 prompt_ramdisk=0 rw printk.time=0 kbd=de-latin1-nodeadkeys tz=UTC locale=en_US.utf8 xkb=de,nodeadkeys |
| [ 0.000000] x86/fpu: Supporting XSAVE feature 0x001: 'x87 floating point registers' |
| [ 0.000000] x86/fpu: Supporting XSAVE feature 0x002: 'SSE registers' |
| [ 0.000000] x86/fpu: Supporting XSAVE feature 0x004: 'AVX registers' |
| [ 0.000000] x86/fpu: xstate_offset[2]: 576, xstate_sizes[2]: 256 |
| [ 0.000000] x86/fpu: Enabled xstate features 0x7, context size is 832 bytes, using 'standard' format. |
| [ 0.000000] signal: max sigframe size: 1776 |
| [ 0.000000] reserving inaccessible SNB gfx pages |
| [ 0.000000] BIOS-provided physical RAM map: |
| [ 0.000000] BIOS-e820: [mem 0x0000000000000000-0x0000000000000fff] reserved |
| [ 0.000000] BIOS-e820: [mem 0x0000000000001000-0x000000000009ffff] usable |
| [ 0.000000] BIOS-e820: [mem 0x00000000000a0000-0x00000000000fffff] reserved |
| [ 0.000000] BIOS-e820: [mem 0x0000000000100000-0x000000001ec1afff] usable |
| [ 0.000000] BIOS-e820: [mem 0x000000001ec1b000-0x000000001ec1bfff] ACPI data |
| [ 0.000000] BIOS-e820: [mem 0x000000001ec1c000-0x000000001fca4fff] usable |
| [ 0.000000] BIOS-e820: [mem 0x000000001fca5000-0x000000001fca6fff] ACPI data |
| [ 0.000000] BIOS-e820: [mem 0x000000001fca7000-0x000000001fcbcfff] usable |
| [ 0.000000] BIOS-e820: [mem 0x000000001fcbd000-0x000000001fcbefff] ACPI data |
| [ 0.000000] BIOS-e820: [mem 0x000000001fcbf000-0x000000001feaefff] usable |
| [ 0.000000] BIOS-e820: [mem 0x000000001feaf000-0x000000001ff2efff] type 20 |
| [ 0.000000] BIOS-e820: [mem 0x000000001ff2f000-0x000000001fff2fff] reserved |
| [ 0.000000] BIOS-e820: [mem 0x000000001fff3000-0x000000001fff6fff] ACPI NVS |
| [ 0.000000] BIOS-e820: [mem 0x000000001fff7000-0x000000001fffefff] ACPI data |
| [ 0.000000] BIOS-e820: [mem 0x000000001ffff000-0x000000001fffffff] usable |
| [ 0.000000] BIOS-e820: [mem 0x0000000020000000-0x00000000201fffff] reserved |
| [ 0.000000] BIOS-e820: [mem 0x0000000020200000-0x000000003fffffff] usable |
| [ 0.000000] BIOS-e820: [mem 0x0000000040000000-0x00000000401fffff] reserved |
| [ 0.000000] BIOS-e820: [mem 0x0000000040200000-0x000000007ff27fff] usable |
| [ 0.000000] BIOS-e820: [mem 0x000000007ff28000-0x00000000849fffff] reserved |
| [ 0.000000] BIOS-e820: [mem 0x00000000ffe10000-0x00000000ffe4ffff] reserved |
| [ 0.000000] BIOS-e820: [mem 0x0000000100000000-0x000000047a5fffff] usable |
| [ 0.000000] NX (Execute Disable) protection: active |
| [ 0.000000] efi: EFI v2.70 by EDK II |
| [ 0.000000] efi: SMBIOS=0x1ffd6000 SMBIOS 3.0=0x1ffd4000 ACPI=0x1fffe000 ACPI 2.0=0x1fffe014 MEMATTR=0x1ec17018 |
| [ 0.000000] SMBIOS 3.3.0 present. |
| [ 0.000000] DMI: ASROCK H77 Pro4-M/H77 Pro4-M, BIOS 4.19-594-ge10d8a0d52 02/26/2023 |
| [ 0.000000] tsc: Fast TSC calibration using PIT |
| [ 0.000000] tsc: Detected 3292.238 MHz processor |
| [ 0.000010] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved |
| [ 0.000012] e820: remove [mem 0x000a0000-0x000fffff] usable |
| [ 0.000021] last_pfn = 0x47a600 max_arch_pfn = 0x400000000 |
| [ 0.000631] x86/PAT: Configuration [0-7]: WB WC UC- UC WB WP UC- WT |
| [ 0.001043] last_pfn = 0x7ff28 max_arch_pfn = 0x400000000 |
| [ 0.010093] Secure boot disabled |
| [ 0.010094] RAMDISK: [mem 0x35b23000-0x36d88fff] |
| [ 0.010097] ACPI: Early table checksum verification disabled |
| [ 0.010100] ACPI: RSDP 0x000000001FFFE014 000024 (v02 COREv4) |
| [ 0.010105] ACPI: XSDT 0x000000001FFFD0E8 00005C (v01 COREv4 COREBOOT 00000000 01000013) |
| [ 0.010110] ACPI: FACP 0x000000001FFFC000 000114 (v06 COREv4 COREBOOT 00000000 CORE 20200717) |
| [ 0.010115] ACPI: DSDT 0x000000001FFF9000 00223D (v02 COREv4 COREBOOT 20141018 INTL 20200717) |
| [ 0.010117] ACPI: FACS 0x000000007FF30240 000040 |
| [ 0.010120] ACPI: SSDT 0x000000001FFF7000 00146F (v02 COREv4 COREBOOT 0000002A CORE 20200717) |
| [ 0.010122] ACPI: MCFG 0x000000001FCBE000 00003C (v01 COREv4 COREBOOT 00000000 CORE 20200717) |
| [ 0.010125] ACPI: APIC 0x000000001FCBD000 000072 (v03 COREv4 COREBOOT 00000000 CORE 20200717) |
| [ 0.010128] ACPI: DMAR 0x000000001FCA6000 0000C0 (v01 COREv4 COREBOOT 00000000 CORE 20200717) |
| [ 0.010131] ACPI: HPET 0x000000001FCA5000 000038 (v01 COREv4 COREBOOT 00000000 CORE 20200717) |
| [ 0.010133] ACPI: BGRT 0x000000001EC1B000 000038 (v01 INTEL EDK2 00000002 01000013) |
| [ 0.010135] ACPI: Reserving FACP table memory at [mem 0x1fffc000-0x1fffc113] |
| [ 0.010137] ACPI: Reserving DSDT table memory at [mem 0x1fff9000-0x1fffb23c] |
| [ 0.010138] ACPI: Reserving FACS table memory at [mem 0x7ff30240-0x7ff3027f] |
| [ 0.010139] ACPI: Reserving SSDT table memory at [mem 0x1fff7000-0x1fff846e] |
| [ 0.010139] ACPI: Reserving MCFG table memory at [mem 0x1fcbe000-0x1fcbe03b] |
| [ 0.010140] ACPI: Reserving APIC table memory at [mem 0x1fcbd000-0x1fcbd071] |
| [ 0.010141] ACPI: Reserving DMAR table memory at [mem 0x1fca6000-0x1fca60bf] |
| [ 0.010142] ACPI: Reserving HPET table memory at [mem 0x1fca5000-0x1fca5037] |
| [ 0.010143] ACPI: Reserving BGRT table memory at [mem 0x1ec1b000-0x1ec1b037] |
| [ 0.010189] No NUMA configuration found |
| [ 0.010190] Faking a node at [mem 0x0000000000000000-0x000000047a5fffff] |
| [ 0.010194] NODE_DATA(0) allocated [mem 0x47a5ee000-0x47a5f2fff] |
| [ 0.010223] Zone ranges: |
| [ 0.010223] DMA [mem 0x0000000000001000-0x0000000000ffffff] |
| [ 0.010225] DMA32 [mem 0x0000000001000000-0x00000000ffffffff] |
| [ 0.010226] Normal [mem 0x0000000100000000-0x000000047a5fffff] |
| [ 0.010227] Device empty |
| [ 0.010228] Movable zone start for each node |
| [ 0.010229] Early memory node ranges |
| [ 0.010229] node 0: [mem 0x0000000000001000-0x000000000009ffff] |
| [ 0.010231] node 0: [mem 0x0000000000100000-0x000000001ec1afff] |
| [ 0.010231] node 0: [mem 0x000000001ec1c000-0x000000001fca4fff] |
| [ 0.010232] node 0: [mem 0x000000001fca7000-0x000000001fcbcfff] |
| [ 0.010233] node 0: [mem 0x000000001fcbf000-0x000000001feaefff] |
| [ 0.010234] node 0: [mem 0x000000001ffff000-0x000000001fffffff] |
| [ 0.010235] node 0: [mem 0x0000000020200000-0x000000003fffffff] |
| [ 0.010235] node 0: [mem 0x0000000040200000-0x000000007ff27fff] |
| [ 0.010236] node 0: [mem 0x0000000100000000-0x000000047a5fffff] |
| [ 0.010239] Initmem setup node 0 [mem 0x0000000000001000-0x000000047a5fffff] |
| [ 0.010242] On node 0, zone DMA: 1 pages in unavailable ranges |
| [ 0.010263] On node 0, zone DMA: 96 pages in unavailable ranges |
| [ 0.010969] On node 0, zone DMA32: 1 pages in unavailable ranges |
| [ 0.010973] On node 0, zone DMA32: 2 pages in unavailable ranges |
| [ 0.010978] On node 0, zone DMA32: 2 pages in unavailable ranges |
| [ 0.010982] On node 0, zone DMA32: 336 pages in unavailable ranges |
| [ 0.012038] On node 0, zone DMA32: 512 pages in unavailable ranges |
| [ 0.014073] On node 0, zone DMA32: 512 pages in unavailable ranges |
| [ 0.042151] On node 0, zone Normal: 216 pages in unavailable ranges |
| [ 0.042360] On node 0, zone Normal: 23040 pages in unavailable ranges |
| [ 0.042374] Reserving Intel graphics memory at [mem 0x80a00000-0x849fffff] |
| [ 0.042460] ACPI: PM-Timer IO Port: 0x508 |
| [ 0.042466] ACPI: LAPIC_NMI (acpi_id[0xff] high edge lint[0x1]) |
| [ 0.042477] IOAPIC[0]: apic_id 0, version 32, address 0xfec00000, GSI 0-23 |
| [ 0.042480] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) |
| [ 0.042482] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level) |
| [ 0.042486] ACPI: Using ACPI (MADT) for SMP configuration information |
| [ 0.042487] ACPI: HPET id: 0x8086a701 base: 0xfed00000 |
| [ 0.042500] e820: update [mem 0x1e55f000-0x1e583fff] usable ==> reserved |
| [ 0.042511] TSC deadline timer available |
| [ 0.042512] smpboot: Allowing 4 CPUs, 0 hotplug CPUs |
| [ 0.042536] PM: hibernation: Registered nosave memory: [mem 0x00000000-0x00000fff] |
| [ 0.042538] PM: hibernation: Registered nosave memory: [mem 0x000a0000-0x000fffff] |
| [ 0.042539] PM: hibernation: Registered nosave memory: [mem 0x1e55f000-0x1e583fff] |
| [ 0.042541] PM: hibernation: Registered nosave memory: [mem 0x1ec1b000-0x1ec1bfff] |
| [ 0.042543] PM: hibernation: Registered nosave memory: [mem 0x1fca5000-0x1fca6fff] |
| [ 0.042544] PM: hibernation: Registered nosave memory: [mem 0x1fcbd000-0x1fcbefff] |
| [ 0.042546] PM: hibernation: Registered nosave memory: [mem 0x1feaf000-0x1ff2efff] |
| [ 0.042547] PM: hibernation: Registered nosave memory: [mem 0x1ff2f000-0x1fff2fff] |
| [ 0.042547] PM: hibernation: Registered nosave memory: [mem 0x1fff3000-0x1fff6fff] |
| [ 0.042548] PM: hibernation: Registered nosave memory: [mem 0x1fff7000-0x1fffefff] |
| [ 0.042550] PM: hibernation: Registered nosave memory: [mem 0x20000000-0x201fffff] |
| [ 0.042551] PM: hibernation: Registered nosave memory: [mem 0x40000000-0x401fffff] |
| [ 0.042553] PM: hibernation: Registered nosave memory: [mem 0x7ff28000-0x849fffff] |
| [ 0.042554] PM: hibernation: Registered nosave memory: [mem 0x84a00000-0xffe0ffff] |
| [ 0.042554] PM: hibernation: Registered nosave memory: [mem 0xffe10000-0xffe4ffff] |
| [ 0.042555] PM: hibernation: Registered nosave memory: [mem 0xffe50000-0xffffffff] |
| [ 0.042557] [mem 0x84a00000-0xffe0ffff] available for PCI devices |
| [ 0.042558] Booting paravirtualized kernel on bare hardware |
| [ 0.042560] clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 1910969940391419 ns |
| [ 0.047299] setup_percpu: NR_CPUS:256 nr_cpumask_bits:256 nr_cpu_ids:4 nr_node_ids:1 |
| [ 0.047473] percpu: Embedded 59 pages/cpu s204800 r8192 d28672 u524288 |
| [ 0.047481] pcpu-alloc: s204800 r8192 d28672 u524288 alloc=1*2097152 |
| [ 0.047483] pcpu-alloc: [0] 0 1 2 3 |
| [ 0.047506] Fallback order for Node 0: 0 |
| [ 0.047509] Built 1 zonelists, mobility grouping on. Total pages: 4102851 |
| [ 0.047510] Policy zone: Normal |
| [ 0.047511] Kernel command line: BOOT_IMAGE=(hd0,gpt2)/boot/generic load_ramdisk=1 prompt_ramdisk=0 rw printk.time=0 kbd=de-latin1-nodeadkeys tz=UTC locale=en_US.utf8 xkb=de,nodeadkeys |
| [ 0.047545] ignoring the deprecated load_ramdisk= option |
| [ 0.047555] ignoring the deprecated prompt_ramdisk= option |
| [ 0.047614] Unknown kernel command line parameters "BOOT_IMAGE=(hd0,gpt2)/boot/generic kbd=de-latin1-nodeadkeys tz=UTC locale=en_US.utf8 xkb=de,nodeadkeys", will be passed to user space. |
| [ 0.048467] Dentry cache hash table entries: 2097152 (order: 12, 16777216 bytes, linear) |
| [ 0.048916] Inode-cache hash table entries: 1048576 (order: 11, 8388608 bytes, linear) |
| [ 0.048971] mem auto-init: stack:off, heap alloc:off, heap free:off |
| [ 0.104923] Memory: 16233976K/16678344K available (14345K kernel code, 2609K rwdata, 4748K rodata, 1900K init, 3368K bss, 444108K reserved, 0K cma-reserved) |
| [ 0.105194] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1 |
| [ 0.105208] Kernel/User page tables isolation: enabled |
| [ 0.105223] ftrace: allocating 44052 entries in 173 pages |
| [ 0.112020] ftrace: allocated 173 pages with 5 groups |
| [ 0.112079] Dynamic Preempt: full |
| [ 0.112116] rcu: Preemptible hierarchical RCU implementation. |
| [ 0.112116] rcu: CONFIG_RCU_FANOUT set to non-default value of 32. |
| [ 0.112117] rcu: RCU restricting CPUs from NR_CPUS=256 to nr_cpu_ids=4. |
| [ 0.112118] Trampoline variant of Tasks RCU enabled. |
| [ 0.112119] Rude variant of Tasks RCU enabled. |
| [ 0.112119] Tracing variant of Tasks RCU enabled. |
| [ 0.112120] rcu: RCU calculated value of scheduler-enlistment delay is 100 jiffies. |
| [ 0.112121] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=4 |
| [ 0.113079] NR_IRQS: 16640, nr_irqs: 456, preallocated irqs: 16 |
| [ 0.113252] rcu: srcu_init: Setting srcu_struct sizes based on contention. |
| [ 0.113306] Console: colour dummy device 80x25 |
| [ 0.113491] printk: console [tty0] enabled |
| [ 0.113512] ACPI: Core revision 20220331 |
| [ 0.113590] clocksource: hpet: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 133484882848 ns |
| [ 0.113627] spurious 8259A interrupt: IRQ7. |
| [ 0.113633] APIC: Switch to symmetric I/O mode setup |
| [ 0.113635] DMAR: Host address width 36 |
| [ 0.113637] DMAR: DRHD base: 0x000000fed90000 flags: 0x0 |
| [ 0.113646] DMAR: dmar0: reg_base_addr fed90000 ver 1:0 cap c0000020e60262 ecap f0101a |
| [ 0.113649] DMAR: DRHD base: 0x000000fed91000 flags: 0x1 |
| [ 0.113653] DMAR: dmar1: reg_base_addr fed91000 ver 1:0 cap c9008020660262 ecap f0105a |
| [ 0.113656] DMAR: RMRR base: 0x00000080800000 end: 0x000000849fffff |
| [ 0.113659] DMAR-IR: IOAPIC id 0 under DRHD base 0xfed91000 IOMMU 1 |
| [ 0.113661] DMAR-IR: HPET id 0 under DRHD base 0xfed91000 |
| [ 0.113663] DMAR-IR: Queued invalidation will be enabled to support x2apic and Intr-remapping. |
| [ 0.114178] DMAR-IR: Enabled IRQ remapping in x2apic mode |
| [ 0.114182] x2apic enabled |
| [ 0.114190] Switched APIC routing to cluster x2apic. |
| [ 0.114638] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1 |
| [ 0.119609] clocksource: tsc-early: mask: 0xffffffffffffffff max_cycles: 0x2f74a7c8ada, max_idle_ns: 440795203877 ns |
| [ 0.119618] Calibrating delay loop (skipped), value calculated using timer frequency.. 6584.47 BogoMIPS (lpj=3292238) |
| [ 0.119623] pid_max: default: 32768 minimum: 301 |
| [ 0.120883] LSM: Security Framework initializing |
| [ 0.120960] Mount-cache hash table entries: 32768 (order: 6, 262144 bytes, linear) |
| [ 0.120995] Mountpoint-cache hash table entries: 32768 (order: 6, 262144 bytes, linear) |
| [ 0.121249] CPU0: Thermal monitoring enabled (TM1) |
| [ 0.121270] process: using mwait in idle threads |
| [ 0.121273] Last level iTLB entries: 4KB 512, 2MB 8, 4MB 8 |
| [ 0.121275] Last level dTLB entries: 4KB 512, 2MB 32, 4MB 32, 1GB 0 |
| [ 0.121280] Spectre V1 : Mitigation: usercopy/swapgs barriers and __user pointer sanitization |
| [ 0.121284] Spectre V2 : Mitigation: Retpolines |
| [ 0.121285] Spectre V2 : Spectre v2 / SpectreRSB mitigation: Filling RSB on context switch |
| [ 0.121287] Spectre V2 : Spectre v2 / SpectreRSB : Filling RSB on VMEXIT |
| [ 0.121289] Spectre V2 : Enabling Restricted Speculation for firmware calls |
| [ 0.121291] Spectre V2 : mitigation: Enabling conditional Indirect Branch Prediction Barrier |
| [ 0.121294] Speculative Store Bypass: Mitigation: Speculative Store Bypass disabled via prctl |
| [ 0.121299] MDS: Mitigation: Clear CPU buffers |
| [ 0.121300] MMIO Stale Data: Unknown: No mitigations |
| [ 0.132391] Freeing SMP alternatives memory: 44K |
| [ 0.132505] smpboot: CPU0: Intel(R) Core(TM) i5-2500 CPU @ 3.30GHz (family: 0x6, model: 0x2a, stepping: 0x7) |
| [ 0.132613] cblist_init_generic: Setting adjustable number of callback queues. |
| [ 0.132613] cblist_init_generic: Setting shift to 2 and lim to 1. |
| [ 0.132613] cblist_init_generic: Setting shift to 2 and lim to 1. |
| [ 0.132613] cblist_init_generic: Setting shift to 2 and lim to 1. |
| [ 0.132613] Performance Events: PEBS fmt1+, SandyBridge events, 16-deep LBR, full-width counters, Intel PMU driver. |
| [ 0.132613] ... version: 3 |
| [ 0.132613] ... bit width: 48 |
| [ 0.132613] ... generic registers: 8 |
| [ 0.132613] ... value mask: 0000ffffffffffff |
| [ 0.132613] ... max period: 00007fffffffffff |
| [ 0.132613] ... fixed-purpose events: 3 |
| [ 0.132613] ... event mask: 00000007000000ff |
| [ 0.132613] Estimated ratio of average max frequency by base frequency (times 1024): 1055 |
| [ 0.132613] rcu: Hierarchical SRCU implementation. |
| [ 0.132613] rcu: Max phase no-delay instances is 400. |
| [ 0.132613] smp: Bringing up secondary CPUs ... |
| [ 0.132613] x86: Booting SMP configuration: |
| [ 0.132613] .... node #0, CPUs: #1 #2 #3 |
| [ 0.134638] smp: Brought up 1 node, 4 CPUs |
| [ 0.134641] smpboot: Max logical packages: 1 |
| [ 0.134643] smpboot: Total of 4 processors activated (26337.90 BogoMIPS) |
| [ 0.136142] devtmpfs: initialized |
| [ 0.136142] x86/mm: Memory block size: 128MB |
| [ 0.137546] ACPI: PM: Registering ACPI NVS region [mem 0x1fff3000-0x1fff6fff] (16384 bytes) |
| [ 0.137583] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 1911260446275000 ns |
| [ 0.137589] futex hash table entries: 1024 (order: 4, 65536 bytes, linear) |
| [ 0.137633] pinctrl core: initialized pinctrl subsystem |
| [ 0.137967] NET: Registered PF_NETLINK/PF_ROUTE protocol family |
| [ 0.138083] DMA: preallocated 2048 KiB GFP_KERNEL pool for atomic allocations |
| [ 0.138091] DMA: preallocated 2048 KiB GFP_KERNEL|GFP_DMA pool for atomic allocations |
| [ 0.138100] DMA: preallocated 2048 KiB GFP_KERNEL|GFP_DMA32 pool for atomic allocations |
| [ 0.138114] audit: initializing netlink subsys (disabled) |
| [ 0.138149] audit: type=2000 audit(1678623204.024:1): state=initialized audit_enabled=0 res=1 |
| [ 0.138224] thermal_sys: Registered thermal governor 'fair_share' |
| [ 0.138225] thermal_sys: Registered thermal governor 'bang_bang' |
| [ 0.138228] thermal_sys: Registered thermal governor 'step_wise' |
| [ 0.138229] thermal_sys: Registered thermal governor 'user_space' |
| [ 0.138264] cpuidle: using governor ladder |
| [ 0.138270] cpuidle: using governor menu |
| [ 0.138333] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5 |
| [ 0.138396] PCI: MMCONFIG for domain 0000 [bus 00-3f] at [mem 0xf0000000-0xf3ffffff] (base 0xf0000000) |
| [ 0.138402] PCI: not using MMCONFIG |
| [ 0.138406] PCI: Using configuration type 1 for base access |
| [ 0.138454] core: PMU erratum BJ122, BV98, HSD29 workaround disabled, HT off |
| [ 0.140062] HugeTLB: can optimize 7 vmemmap pages for hugepages-2048kB |
| [ 0.140067] HugeTLB registered 2.00 MiB page size, pre-allocated 0 pages |
| [ 0.140166] cryptd: max_cpu_qlen set to 1000 |
| [ 0.140341] raid6: skipped pq benchmark and selected sse2x4 |
| [ 0.140345] raid6: using ssse3x2 recovery algorithm |
| [ 0.140383] ACPI: Added _OSI(Module Device) |
| [ 0.140385] ACPI: Added _OSI(Processor Device) |
| [ 0.140387] ACPI: Added _OSI(3.0 _SCP Extensions) |
| [ 0.140389] ACPI: Added _OSI(Processor Aggregator Device) |
| [ 0.140391] ACPI: Added _OSI(Linux-Dell-Video) |
| [ 0.140392] ACPI: Added _OSI(Linux-Lenovo-NV-HDMI-Audio) |
| [ 0.140394] ACPI: Added _OSI(Linux-HPI-Hybrid-Graphics) |
| [ 0.141550] ACPI: 2 ACPI AML tables successfully acquired and loaded |
| [ 0.142074] ACPI: Interpreter enabled |
| [ 0.142089] ACPI: PM: (supports S0 S3 S4 S5) |
| [ 0.142090] ACPI: Using IOAPIC for interrupt routing |
| [ 0.142112] PCI: MMCONFIG for domain 0000 [bus 00-3f] at [mem 0xf0000000-0xf3ffffff] (base 0xf0000000) |
| [ 0.142269] PCI: MMCONFIG at [mem 0xf0000000-0xf3ffffff] reserved in ACPI motherboard resources |
| [ 0.142281] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug |
| [ 0.142284] PCI: Ignoring E820 reservations for host bridge windows |
| [ 0.144484] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff]) |
| [ 0.144492] acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI EDR HPX-Type3] |
| [ 0.144519] acpi PNP0A08:00: _OSC: OS now controls [PCIeHotplug PME AER PCIeCapability LTR DPC] |
| [ 0.144527] acpi PNP0A08:00: [Firmware Info]: MMCONFIG for domain 0000 [bus 00-3f] only partially covers this bridge |
| [ 0.144745] PCI host bridge to bus 0000:00 |
| [ 0.144748] pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7 window] |
| [ 0.144751] pci_bus 0000:00: root bus resource [io 0x0d00-0xffff window] |
| [ 0.144753] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000fffff window] |
| [ 0.144756] pci_bus 0000:00: root bus resource [mem 0x84a00000-0xefffffff window] |
| [ 0.144758] pci_bus 0000:00: root bus resource [mem 0x47a600000-0xfffffffff window] |
| [ 0.144761] pci_bus 0000:00: root bus resource [mem 0xfed40000-0xfed44fff window] |
| [ 0.144763] pci_bus 0000:00: root bus resource [bus 00-ff] |
| [ 0.144777] pci 0000:00:00.0: [8086:0100] type 00 class 0x060000 |
| [ 0.144855] pci 0000:00:01.0: [8086:0101] type 01 class 0x060400 |
| [ 0.144887] pci 0000:00:01.0: PME# supported from D0 D3hot D3cold |
| [ 0.144948] pci 0000:00:02.0: [8086:0102] type 00 class 0x030000 |
| [ 0.144957] pci 0000:00:02.0: reg 0x10: [mem 0x84c00000-0x84ffffff 64bit] |
| [ 0.144963] pci 0000:00:02.0: reg 0x18: [mem 0x90000000-0x9fffffff 64bit pref] |
| [ 0.144968] pci 0000:00:02.0: reg 0x20: [io 0x3000-0x303f] |
| [ 0.144977] pci 0000:00:02.0: BAR 2: assigned to efifb |
| [ 0.144981] pci 0000:00:02.0: Video device with shadowed ROM at [mem 0x000c0000-0x000dffff] |
| [ 0.145061] pci 0000:00:14.0: [8086:1e31] type 00 class 0x0c0330 |
| [ 0.145082] pci 0000:00:14.0: reg 0x10: [mem 0x85000000-0x8500ffff 64bit] |
| [ 0.145149] pci 0000:00:14.0: PME# supported from D3hot D3cold |
| [ 0.145225] pci 0000:00:1a.0: [8086:1e2d] type 00 class 0x0c0320 |
| [ 0.145242] pci 0000:00:1a.0: reg 0x10: [mem 0x85015000-0x850153ff] |
| [ 0.145324] pci 0000:00:1a.0: PME# supported from D0 D3hot D3cold |
| [ 0.145401] pci 0000:00:1b.0: [8086:1e20] type 00 class 0x040300 |
| [ 0.145419] pci 0000:00:1b.0: reg 0x10: [mem 0x85010000-0x85013fff 64bit] |
| [ 0.145493] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold |
| [ 0.145579] pci 0000:00:1c.0: [8086:1e10] type 01 class 0x060400 |
| [ 0.145728] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold |
| [ 0.145831] pci 0000:00:1c.4: [8086:1e18] type 01 class 0x060400 |
| [ 0.145916] pci 0000:00:1c.4: PME# supported from D0 D3hot D3cold |
| [ 0.145993] pci 0000:00:1c.5: [8086:1e1a] type 01 class 0x060400 |
| [ 0.146079] pci 0000:00:1c.5: PME# supported from D0 D3hot D3cold |
| [ 0.146154] pci 0000:00:1c.6: [8086:1e1c] type 01 class 0x060400 |
| [ 0.146240] pci 0000:00:1c.6: PME# supported from D0 D3hot D3cold |
| [ 0.146316] pci 0000:00:1c.7: [8086:1e1e] type 01 class 0x060400 |
| [ 0.146401] pci 0000:00:1c.7: PME# supported from D0 D3hot D3cold |
| [ 0.146480] pci 0000:00:1d.0: [8086:1e26] type 00 class 0x0c0320 |
| [ 0.146497] pci 0000:00:1d.0: reg 0x10: [mem 0x85016000-0x850163ff] |
| [ 0.146579] pci 0000:00:1d.0: PME# supported from D0 D3hot D3cold |
| [ 0.146657] pci 0000:00:1f.0: [8086:1e4a] type 00 class 0x060100 |
| [ 0.146819] pci 0000:00:1f.2: [8086:1e02] type 00 class 0x010601 |
| [ 0.146832] pci 0000:00:1f.2: reg 0x10: [io 0x3060-0x3067] |
| [ 0.146841] pci 0000:00:1f.2: reg 0x14: [io 0x3070-0x3073] |
| [ 0.146849] pci 0000:00:1f.2: reg 0x18: [io 0x3068-0x306f] |
| [ 0.146858] pci 0000:00:1f.2: reg 0x1c: [io 0x3074-0x3077] |
| [ 0.146866] pci 0000:00:1f.2: reg 0x20: [io 0x3040-0x305f] |
| [ 0.146874] pci 0000:00:1f.2: reg 0x24: [mem 0x85014000-0x850147ff] |
| [ 0.146913] pci 0000:00:1f.2: PME# supported from D3hot |
| [ 0.146974] pci 0000:00:1f.3: [8086:1e22] type 00 class 0x0c0500 |
| [ 0.146992] pci 0000:00:1f.3: reg 0x10: [mem 0x85017000-0x850170ff 64bit] |
| [ 0.147013] pci 0000:00:1f.3: reg 0x20: [io 0x0400-0x041f] |
| [ 0.147102] pci 0000:00:01.0: PCI bridge to [bus 01] |
| [ 0.147163] pci 0000:00:1c.0: PCI bridge to [bus 02] |
| [ 0.147213] pci 0000:00:1c.4: PCI bridge to [bus 03] |
| [ 0.147283] pci 0000:04:00.0: [10ec:8168] type 00 class 0x020000 |
| [ 0.147309] pci 0000:04:00.0: reg 0x10: [io 0x1000-0x10ff] |
| [ 0.147343] pci 0000:04:00.0: reg 0x18: [mem 0x84a04000-0x84a04fff 64bit pref] |
| [ 0.147365] pci 0000:04:00.0: reg 0x20: [mem 0x84a00000-0x84a03fff 64bit pref] |
| [ 0.147488] pci 0000:04:00.0: supports D1 D2 |
| [ 0.147490] pci 0000:04:00.0: PME# supported from D0 D1 D2 D3hot D3cold |
| [ 0.147627] pci 0000:00:1c.5: PCI bridge to [bus 04] |
| [ 0.147632] pci 0000:00:1c.5: bridge window [io 0x1000-0x1fff] |
| [ 0.147641] pci 0000:00:1c.5: bridge window [mem 0x84a00000-0x84afffff 64bit pref] |
| [ 0.147681] pci 0000:00:1c.6: PCI bridge to [bus 05] |
| [ 0.147751] pci 0000:06:00.0: [1b21:0611] type 00 class 0x010185 |
| [ 0.147775] pci 0000:06:00.0: reg 0x10: [io 0x2010-0x2017] |
| [ 0.147790] pci 0000:06:00.0: reg 0x14: [io 0x2020-0x2023] |
| [ 0.147804] pci 0000:06:00.0: reg 0x18: [io 0x2018-0x201f] |
| [ 0.147818] pci 0000:06:00.0: reg 0x1c: [io 0x2024-0x2027] |
| [ 0.147832] pci 0000:06:00.0: reg 0x20: [io 0x2000-0x200f] |
| [ 0.147846] pci 0000:06:00.0: reg 0x24: [mem 0x84b00000-0x84b001ff] |
| [ 0.148021] pci 0000:00:1c.7: PCI bridge to [bus 06] |
| [ 0.148026] pci 0000:00:1c.7: bridge window [io 0x2000-0x2fff] |
| [ 0.148031] pci 0000:00:1c.7: bridge window [mem 0x84b00000-0x84bfffff] |
| [ 0.148179] ACPI: PCI: Interrupt link LNKA configured for IRQ 11 |
| [ 0.148216] ACPI: PCI: Interrupt link LNKB configured for IRQ 11 |
| [ 0.148250] ACPI: PCI: Interrupt link LNKC configured for IRQ 11 |
| [ 0.148288] ACPI: PCI: Interrupt link LNKD configured for IRQ 11 |
| [ 0.148321] ACPI: PCI: Interrupt link LNKE configured for IRQ 11 |
| [ 0.148355] ACPI: PCI: Interrupt link LNKF configured for IRQ 11 |
| [ 0.148388] ACPI: PCI: Interrupt link LNKG configured for IRQ 11 |
| [ 0.148421] ACPI: PCI: Interrupt link LNKH configured for IRQ 11 |
| [ 0.148696] iommu: Default domain type: Translated |
| [ 0.148699] iommu: DMA domain TLB invalidation policy: lazy mode |
| [ 0.148813] SCSI subsystem initialized |
| [ 0.148843] libata version 3.00 loaded. |
| [ 0.148852] ACPI: bus type USB registered |
| [ 0.148868] usbcore: registered new interface driver usbfs |
| [ 0.148877] usbcore: registered new interface driver hub |
| [ 0.148883] usbcore: registered new device driver usb |
| [ 0.148894] pps_core: LinuxPPS API ver. 1 registered |
| [ 0.148896] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it> |
| [ 0.148900] PTP clock support registered |
| [ 0.148935] EDAC MC: Ver: 3.0.0 |
| [ 0.149028] Registered efivars operations |
| [ 0.149216] PCI: Using ACPI for IRQ routing |
| [ 0.150617] PCI: pci_cache_line_size set to 64 bytes |
| [ 0.150661] e820: reserve RAM buffer [mem 0x1e55f000-0x1fffffff] |
| [ 0.150663] e820: reserve RAM buffer [mem 0x1ec1b000-0x1fffffff] |
| [ 0.150664] e820: reserve RAM buffer [mem 0x1fca5000-0x1fffffff] |
| [ 0.150666] e820: reserve RAM buffer [mem 0x1fcbd000-0x1fffffff] |
| [ 0.150667] e820: reserve RAM buffer [mem 0x1feaf000-0x1fffffff] |
| [ 0.150668] e820: reserve RAM buffer [mem 0x7ff28000-0x7fffffff] |
| [ 0.150669] e820: reserve RAM buffer [mem 0x47a600000-0x47bffffff] |
| [ 0.150686] pci 0000:00:02.0: vgaarb: setting as boot VGA device |
| [ 0.150686] pci 0000:00:02.0: vgaarb: bridge control possible |
| [ 0.150686] pci 0000:00:02.0: vgaarb: VGA device added: decodes=io+mem,owns=io+mem,locks=none |
| [ 0.150686] vgaarb: loaded |
| [ 0.150697] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0, 0, 0, 0, 0 |
| [ 0.150705] hpet0: 8 comparators, 64-bit 14.318180 MHz counter |
| [ 0.152634] clocksource: Switched to clocksource tsc-early |
| [ 0.152737] VFS: Disk quotas dquot_6.6.0 |
| [ 0.152752] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes) |
| [ 0.152802] pnp: PnP ACPI init |
| [ 0.152919] system 00:00: [mem 0xfed1c000-0xfed1ffff] has been reserved |
| [ 0.152923] system 00:00: [mem 0xfed10000-0xfed17fff] has been reserved |
| [ 0.152926] system 00:00: [mem 0xfed18000-0xfed18fff] has been reserved |
| [ 0.152928] system 00:00: [mem 0xfed19000-0xfed19fff] has been reserved |
| [ 0.152931] system 00:00: [mem 0xf0000000-0xf3ffffff] has been reserved |
| [ 0.152933] system 00:00: [mem 0xfed20000-0xfed3ffff] has been reserved |
| [ 0.152936] system 00:00: [mem 0xfed40000-0xfed44fff] has been reserved |
| [ 0.152938] system 00:00: [mem 0xfed45000-0xfed8ffff] has been reserved |
| [ 0.152940] system 00:00: [mem 0x20000000-0x201fffff] has been reserved |
| [ 0.152943] system 00:00: [mem 0x40000000-0x401fffff] has been reserved |
| [ 0.153097] system 00:01: [mem 0xfed00000-0xfed003ff] has been reserved |
| [ 0.153137] system 00:02: [io 0x0500-0x057f] has been reserved |
| [ 0.153140] system 00:02: [io 0x0480-0x04bf] has been reserved |
| [ 0.153207] pnp: PnP ACPI: found 6 devices |
| [ 0.158927] clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns |
| [ 0.158993] NET: Registered PF_INET protocol family |
| [ 0.159175] IP idents hash table entries: 262144 (order: 9, 2097152 bytes, linear) |
| [ 0.162514] tcp_listen_portaddr_hash hash table entries: 8192 (order: 5, 131072 bytes, linear) |
| [ 0.162533] Table-perturb hash table entries: 65536 (order: 6, 262144 bytes, linear) |
| [ 0.162538] TCP established hash table entries: 131072 (order: 8, 1048576 bytes, linear) |
| [ 0.162692] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes, linear) |
| [ 0.162802] TCP: Hash tables configured (established 131072 bind 65536) |
| [ 0.162891] MPTCP token hash table entries: 16384 (order: 6, 393216 bytes, linear) |
| [ 0.162949] UDP hash table entries: 8192 (order: 6, 262144 bytes, linear) |
| [ 0.162987] UDP-Lite hash table entries: 8192 (order: 6, 262144 bytes, linear) |
| [ 0.163059] NET: Registered PF_UNIX/PF_LOCAL protocol family |
| [ 0.163166] RPC: Registered named UNIX socket transport module. |
| [ 0.163169] RPC: Registered udp transport module. |
| [ 0.163170] RPC: Registered tcp transport module. |
| [ 0.163171] RPC: Registered tcp NFSv4.1 backchannel transport module. |
| [ 0.163174] NET: Registered PF_XDP protocol family |
| [ 0.163185] pci 0000:00:01.0: PCI bridge to [bus 01] |
| [ 0.163194] pci 0000:00:1c.0: PCI bridge to [bus 02] |
| [ 0.163212] pci 0000:00:1c.4: PCI bridge to [bus 03] |
| [ 0.163224] pci 0000:00:1c.5: PCI bridge to [bus 04] |
| [ 0.163227] pci 0000:00:1c.5: bridge window [io 0x1000-0x1fff] |
| [ 0.163235] pci 0000:00:1c.5: bridge window [mem 0x84a00000-0x84afffff 64bit pref] |
| [ 0.163242] pci 0000:00:1c.6: PCI bridge to [bus 05] |
| [ 0.163254] pci 0000:00:1c.7: PCI bridge to [bus 06] |
| [ 0.163257] pci 0000:00:1c.7: bridge window [io 0x2000-0x2fff] |
| [ 0.163263] pci 0000:00:1c.7: bridge window [mem 0x84b00000-0x84bfffff] |
| [ 0.163272] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7 window] |
| [ 0.163275] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff window] |
| [ 0.163277] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000fffff window] |
| [ 0.163280] pci_bus 0000:00: resource 7 [mem 0x84a00000-0xefffffff window] |
| [ 0.163282] pci_bus 0000:00: resource 8 [mem 0x47a600000-0xfffffffff window] |
| [ 0.163284] pci_bus 0000:00: resource 9 [mem 0xfed40000-0xfed44fff window] |
| [ 0.163287] pci_bus 0000:04: resource 0 [io 0x1000-0x1fff] |
| [ 0.163289] pci_bus 0000:04: resource 2 [mem 0x84a00000-0x84afffff 64bit pref] |
| [ 0.163291] pci_bus 0000:06: resource 0 [io 0x2000-0x2fff] |
| [ 0.163293] pci_bus 0000:06: resource 1 [mem 0x84b00000-0x84bfffff] |
| [ 0.163760] PCI: CLS 64 bytes, default 64 |
| [ 0.163775] PCI-DMA: Using software bounce buffering for IO (SWIOTLB) |
| [ 0.163778] software IO TLB: mapped [mem 0x000000007bf28000-0x000000007ff28000] (64MB) |
| [ 0.163823] Trying to unpack rootfs image as initramfs... |
| [ 0.164563] Initialise system trusted keyrings |
| [ 0.164579] Key type blacklist registered |
| [ 0.164622] workingset: timestamp_bits=40 max_order=22 bucket_order=0 |
| [ 0.165815] zbud: loaded |
| [ 0.166015] NFS: Registering the id_resolver key type |
| [ 0.166021] Key type id_resolver registered |
| [ 0.166023] Key type id_legacy registered |
| [ 0.166044] nfs4filelayout_init: NFSv4 File Layout Driver Registering... |
| [ 0.166047] nfs4flexfilelayout_init: NFSv4 Flexfile Layout Driver Registering... |
| [ 0.166055] romfs: ROMFS MTD (C) 2007 Red Hat, Inc. |
| [ 0.174744] xor: automatically using best checksumming function avx |
| [ 0.174748] async_tx: api initialized (async) |
| [ 0.174749] Key type asymmetric registered |
| [ 0.174751] Asymmetric key parser 'x509' registered |
| [ 0.174753] Running certificate verification selftests |
| [ 1.169622] tsc: Refined TSC clocksource calibration: 3292.520 MHz |
| [ 1.169634] clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x2f75b1eac7a, max_idle_ns: 440795210882 ns |
| [ 1.169648] clocksource: Switched to clocksource tsc |
| [ 1.724845] Freeing initrd memory: 18840K |
| [ 1.727549] Loaded X.509 cert 'Certificate verification self-testing key: f58703bb33ce1b73ee02eccdee5b8817518fe3db' |
| [ 1.729789] alg: self-tests for CTR-KDF (hmac(sha256)) passed |
| [ 1.729818] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 244) |
| [ 1.729845] io scheduler mq-deadline registered |
| [ 1.729967] atomic64_test: passed for x86-64 platform with CX8 and with SSE |
| [ 1.730175] pcieport 0000:00:01.0: PME: Signaling with IRQ 26 |
| [ 1.730340] pcieport 0000:00:1c.0: PME: Signaling with IRQ 27 |
| [ 1.730512] pcieport 0000:00:1c.4: PME: Signaling with IRQ 28 |
| [ 1.730670] pcieport 0000:00:1c.5: PME: Signaling with IRQ 29 |
| [ 1.730826] pcieport 0000:00:1c.6: PME: Signaling with IRQ 30 |
| [ 1.730974] pcieport 0000:00:1c.7: PME: Signaling with IRQ 31 |
| [ 1.732696] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled |
| [ 1.985794] serial8250: ttyS0 at I/O 0x3f8 (irq = 0, base_baud = 115200) is a 16550A |
| [ 1.988518] brd: module loaded |
| [ 1.988914] ahci 0000:00:1f.2: version 3.0 |
| [ 1.989040] ahci 0000:00:1f.2: SSS flag set, parallel bus scan disabled |
| [ 1.999140] ahci 0000:00:1f.2: AHCI 0001.0300 32 slots 6 ports 6 Gbps 0x3f impl SATA mode |
| [ 1.999154] ahci 0000:00:1f.2: flags: 64bit ncq sntf ilck stag pm led clo pio slum part apst |
| [ 1.999772] scsi host0: ahci |
| [ 2.000070] scsi host1: ahci |
| [ 2.000395] scsi host2: ahci |
| [ 2.000526] scsi host3: ahci |
| [ 2.000679] scsi host4: ahci |
| [ 2.000781] scsi host5: ahci |
| [ 2.000814] ata1: SATA max UDMA/133 abar m2048@0x85014000 port 0x85014100 irq 32 |
| [ 2.000819] ata2: SATA max UDMA/133 abar m2048@0x85014000 port 0x85014180 irq 32 |
| [ 2.000822] ata3: SATA max UDMA/133 abar m2048@0x85014000 port 0x85014200 irq 32 |
| [ 2.000826] ata4: SATA max UDMA/133 abar m2048@0x85014000 port 0x85014280 irq 32 |
| [ 2.000829] ata5: SATA max UDMA/133 abar m2048@0x85014000 port 0x85014300 irq 32 |
| [ 2.000833] ata6: SATA max UDMA/133 abar m2048@0x85014000 port 0x85014380 irq 32 |
| [ 2.001015] ahci 0000:06:00.0: SSS flag set, parallel bus scan disabled |
| [ 2.001055] ahci 0000:06:00.0: AHCI 0001.0200 32 slots 2 ports 6 Gbps 0x3 impl IDE mode |
| [ 2.001059] ahci 0000:06:00.0: flags: 64bit ncq sntf stag led clo pmp pio slum part ccc sxs |
| [ 2.001373] scsi host6: ahci |
| [ 2.001487] scsi host7: ahci |
| [ 2.001526] ata7: SATA max UDMA/133 abar m512@0x84b00000 port 0x84b00100 irq 33 |
| [ 2.001532] ata8: SATA max UDMA/133 abar m512@0x84b00000 port 0x84b00180 irq 33 |
| [ 2.002072] scsi host8: pata_legacy |
| [ 2.002099] ata9: PATA max PIO4 cmd 0x1f0 ctl 0x3f6 irq 14 |
| [ 2.311739] ata1: SATA link down (SStatus 0 SControl 300) |
| [ 2.311741] ata7: SATA link down (SStatus 0 SControl 300) |
| [ 5.009762] floppy0: no floppy controllers found |
| [ 5.009792] work still pending |
| [ 5.319723] ata2: SATA link down (SStatus 0 SControl 300) |
| [ 5.631720] ata3: SATA link up 1.5 Gbps (SStatus 113 SControl 300) |
| [ 5.633710] ata3.00: ATAPI: HL-DT-ST BD-RE BH16NS55, 1.02, max UDMA/133 |
| [ 5.636514] ata3.00: configured for UDMA/133 |
| [ 5.641401] scsi 2:0:0:0: CD-ROM HL-DT-ST BD-RE BH16NS55 1.02 PQ: 0 ANSI: 5 |
| [ 5.683495] sr 2:0:0:0: [sr0] scsi3-mmc drive: 48x/48x writer dvd-ram cd/rw xa/form2 cdda tray |
| [ 5.683507] cdrom: Uniform CD-ROM driver Revision: 3.20 |
| [ 5.704245] sr 2:0:0:0: Attached scsi CD-ROM sr0 |
| [ 6.015681] ata4: SATA link down (SStatus 0 SControl 300) |
| [ 6.327719] ata5: SATA link down (SStatus 0 SControl 300) |
| [ 6.639716] ata6: SATA link down (SStatus 0 SControl 300) |
| [ 6.951745] ata8: SATA link down (SStatus 0 SControl 300) |
| [ 6.958161] scsi host8: pata_legacy |
| [ 6.958191] ata10: PATA max PIO4 cmd 0x170 ctl 0x376 irq 15 |
| [ 7.119980] i8042: PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at 0x60,0x64 irq 1,12 |
| [ 7.123320] serio: i8042 KBD port at 0x60,0x64 irq 1 |
| [ 7.123354] serio: i8042 AUX port at 0x60,0x64 irq 12 |
| [ 7.123451] mousedev: PS/2 mouse device common for all mice |
| [ 7.123488] rtc_cmos 00:03: RTC can wake from S4 |
| [ 7.123782] rtc_cmos 00:03: registered as rtc0 |
| [ 7.123800] rtc_cmos 00:03: alarms up to one month, y3k, 242 bytes nvram, hpet irqs |
| [ 7.124040] device-mapper: uevent: version 1.0.3 |
| [ 7.124108] device-mapper: ioctl: 4.47.0-ioctl (2022-07-28) initialised: dm-devel@redhat.com |
| [ 7.124115] intel_pstate: Intel P-state driver initializing |
| [ 7.124388] efifb: probing for efifb |
| [ 7.124445] efifb: framebuffer at 0x90000000, using 9024k, total 9024k |
| [ 7.124450] efifb: mode is 1920x1200x32, linelength=7680, pages=1 |
| [ 7.124455] efifb: scrolling: redraw |
| [ 7.124457] efifb: Truecolor: size=8:8:8:8, shift=24:16:8:0 |
| [ 7.128229] Console: switching to colour frame buffer device 240x75 |
| [ 7.131748] fb0: EFI VGA frame buffer device |
| [ 7.131772] EFI Variables Facility v0.08 2004-May-17 |
| [ 7.132945] Initializing XFRM netlink socket |
| [ 7.132965] NET: Registered PF_PACKET protocol family |
| [ 7.133099] Key type dns_resolver registered |
| [ 7.133608] microcode: sig=0x206a7, pf=0x2, revision=0x2f |
| [ 7.133660] microcode: Microcode Update Driver: v2.2. |
| [ 7.133664] IPI shorthand broadcast: enabled |
| [ 7.133687] AVX version of gcm_enc/dec engaged. |
| [ 7.133978] AES CTR mode by8 optimization enabled |
| [ 7.134522] sched_clock: Marking stable (7134161438, 337356)->(7141503650, -7004856) |
| [ 7.134754] registered taskstats version 1 |
| [ 7.134767] Loading compiled-in X.509 certificates |
| [ 7.134864] zswap: loaded using pool lzo/zbud |
| [ 7.134981] Key type ._fscrypt registered |
| [ 7.134990] Key type .fscrypt registered |
| [ 7.134997] Key type fscrypt-provisioning registered |
| [ 7.137917] Key type encrypted registered |
| [ 7.139697] RAS: Correctable Errors collector initialized. |
| [ 7.154535] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input0 |
| [ 7.199984] Freeing unused decrypted memory: 2036K |
| [ 7.200508] Freeing unused kernel image (initmem) memory: 1900K |
| [ 7.203669] Write protecting the kernel read-only data: 22528k |
| [ 7.204488] Freeing unused kernel image (text/rodata gap) memory: 2036K |
| [ 7.204935] Freeing unused kernel image (rodata/data gap) memory: 1396K |
| [ 7.205031] rodata_test: all tests were successful |
| [ 7.205054] Run /init as init process |
| [ 7.205066] with arguments: |
| [ 7.205067] /init |
| [ 7.205068] with environment: |
| [ 7.205069] HOME=/ |
| [ 7.205071] TERM=linux |
| [ 7.205072] BOOT_IMAGE=(hd0,gpt2)/boot/generic |
| [ 7.205073] kbd=de-latin1-nodeadkeys |
| [ 7.205074] tz=UTC |
| [ 7.205075] locale=en_US.utf8 |
| [ 7.205077] xkb=de,nodeadkeys |
| [ 7.478617] random: crng init done |
| [ 7.485718] udevd[239]: starting eudev-3.2.11 |
| [ 7.644458] squashfs: version 4.0 (2009/01/31) Phillip Lougher |
| [ 7.652116] loop: module loaded |
| [ 7.661544] xhci_hcd 0000:00:14.0: xHCI Host Controller |
| [ 7.661600] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 1 |
| [ 7.662716] xhci_hcd 0000:00:14.0: hcc params 0x200071a1 hci version 0x100 quirks 0x000000000000b930 |
| [ 7.662878] xhci_hcd 0000:00:14.0: xHCI Host Controller |
| [ 7.662949] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 2 |
| [ 7.662963] xhci_hcd 0000:00:14.0: Host supports USB 3.0 SuperSpeed |
| [ 7.663009] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 5.19 |
| [ 7.663023] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 |
| [ 7.663034] usb usb1: Product: xHCI Host Controller |
| [ 7.663042] usb usb1: Manufacturer: Linux 5.19.17 xhci-hcd |
| [ 7.663050] usb usb1: SerialNumber: 0000:00:14.0 |
| [ 7.663196] hub 1-0:1.0: USB hub found |
| [ 7.663212] hub 1-0:1.0: 4 ports detected |
| [ 7.663866] usb usb2: New USB device found, idVendor=1d6b, idProduct=0003, bcdDevice= 5.19 |
| [ 7.664397] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1 |
| [ 7.664929] usb usb2: Product: xHCI Host Controller |
| [ 7.665431] usb usb2: Manufacturer: Linux 5.19.17 xhci-hcd |
| [ 7.665952] usb usb2: SerialNumber: 0000:00:14.0 |
| [ 7.666555] hub 2-0:1.0: USB hub found |
| [ 7.667090] hub 2-0:1.0: 4 ports detected |
| [ 7.669469] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver |
| [ 7.671412] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver |
| [ 7.673108] ehci-pci: EHCI PCI platform driver |
| [ 7.673758] ehci-pci 0000:00:1a.0: EHCI Host Controller |
| [ 7.674321] ehci-pci 0000:00:1a.0: new USB bus registered, assigned bus number 3 |
| [ 7.674856] ehci-pci 0000:00:1a.0: debug port 2 |
| [ 7.679275] ehci-pci 0000:00:1a.0: irq 19, io mem 0x85015000 |
| [ 7.686682] ehci-pci 0000:00:1a.0: USB 2.0 started, EHCI 1.00 |
| [ 7.687271] usb usb3: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 5.19 |
| [ 7.687842] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1 |
| [ 7.688396] usb usb3: Product: EHCI Host Controller |
| [ 7.688945] usb usb3: Manufacturer: Linux 5.19.17 ehci_hcd |
| [ 7.689492] usb usb3: SerialNumber: 0000:00:1a.0 |
| [ 7.690189] hub 3-0:1.0: USB hub found |
| [ 7.690729] hub 3-0:1.0: 3 ports detected |
| [ 7.691461] ehci-pci 0000:00:1d.0: EHCI Host Controller |
| [ 7.692053] ehci-pci 0000:00:1d.0: new USB bus registered, assigned bus number 4 |
| [ 7.692589] ehci-pci 0000:00:1d.0: debug port 2 |
| [ 7.697032] ehci-pci 0000:00:1d.0: irq 18, io mem 0x85016000 |
| [ 7.703674] ehci-pci 0000:00:1d.0: USB 2.0 started, EHCI 1.00 |
| [ 7.704298] usb usb4: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 5.19 |
| [ 7.704881] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1 |
| [ 7.705452] usb usb4: Product: EHCI Host Controller |
| [ 7.706028] usb usb4: Manufacturer: Linux 5.19.17 ehci_hcd |
| [ 7.706592] usb usb4: SerialNumber: 0000:00:1d.0 |
| [ 7.707366] hub 4-0:1.0: USB hub found |
| [ 7.707935] hub 4-0:1.0: 3 ports detected |
| [ 7.708772] ohci-pci: OHCI PCI platform driver |
| [ 7.713080] uhci_hcd: USB Universal Host Controller Interface driver |
| [ 7.722334] sdhci: Secure Digital Host Controller Interface driver |
| [ 7.722939] sdhci: Copyright(c) Pierre Ossman |
| [ 7.736649] usbcore: registered new interface driver usb-storage |
| [ 7.738802] usbcore: registered new interface driver uas |
| [ 7.741675] hid: raw HID events driver (C) Jiri Kosina |
| [ 7.744196] usbcore: registered new interface driver usbhid |
| [ 7.744763] usbhid: USB HID core driver |
| [ 7.808466] ntfs: driver 2.1.32 [Flags: R/W MODULE]. |
| [ 7.822200] NET: Registered PF_ALG protocol family |
| [ 7.931678] usb 3-1: new high-speed USB device number 2 using ehci-pci |
| [ 7.947676] usb 4-1: new high-speed USB device number 2 using ehci-pci |
| [ 8.061443] usb 3-1: New USB device found, idVendor=8087, idProduct=0024, bcdDevice= 0.00 |
| [ 8.062446] usb 3-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0 |
| [ 8.063869] hub 3-1:1.0: USB hub found |
| [ 8.065041] hub 3-1:1.0: 6 ports detected |
| [ 8.078447] usb 4-1: New USB device found, idVendor=8087, idProduct=0024, bcdDevice= 0.00 |
| [ 8.079462] usb 4-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0 |
| [ 8.080871] hub 4-1:1.0: USB hub found |
| [ 8.082048] hub 4-1:1.0: 8 ports detected |
| [ 8.337650] usb 3-1.1: new low-speed USB device number 3 using ehci-pci |
| [ 8.432043] usb 3-1.1: New USB device found, idVendor=04d9, idProduct=a086, bcdDevice= 4.03 |
| [ 8.433071] usb 3-1.1: New USB device strings: Mfr=1, Product=2, SerialNumber=0 |
| [ 8.434076] usb 3-1.1: Product: USB Wireless Device |
| [ 8.435068] usb 3-1.1: Manufacturer: HOLTEK |
| [ 8.444106] input: HOLTEK USB Wireless Device as /devices/pci0000:00/0000:00:1a.0/usb3/3-1/3-1.1/3-1.1:1.0/0003:04D9:A086.0001/input/input2 |
| [ 8.445427] hid-generic 0003:04D9:A086.0001: input,hidraw0: USB HID v1.10 Mouse [HOLTEK USB Wireless Device] on usb-0000:00:1a.0-1.1/input0 |
| [ 8.510651] usb 3-1.4: new full-speed USB device number 4 using ehci-pci |
| [ 8.592942] usb 3-1.4: New USB device found, idVendor=3838, idProduct=0001, bcdDevice= 0.12 |
| [ 8.594010] usb 3-1.4: New USB device strings: Mfr=1, Product=2, SerialNumber=3 |
| [ 8.595064] usb 3-1.4: Product: USB 1.1 5 in 1 Card Reader/Writer Multi Panel 5.25" |
| [ 8.596118] usb 3-1.4: Manufacturer: WEM |
| [ 8.597180] usb 3-1.4: SerialNumber: 000000000000 |
| [ 8.599701] usb-storage 3-1.4:1.0: USB Mass Storage device detected |
| [ 8.601274] scsi host8: usb-storage 3-1.4:1.0 |
| [ 8.643768] usb 2-1: new SuperSpeed USB device number 2 using xhci_hcd |
| [ 8.658017] usb 2-1: New USB device found, idVendor=0781, idProduct=5581, bcdDevice= 1.00 |
| [ 8.659120] usb 2-1: New USB device strings: Mfr=1, Product=2, SerialNumber=3 |
| [ 8.660207] usb 2-1: Product: Ultra |
| [ 8.661294] usb 2-1: Manufacturer: SanDisk |
| [ 8.662381] usb 2-1: SerialNumber: 4C530001211202102191 |
| [ 8.664749] usb-storage 2-1:1.0: USB Mass Storage device detected |
| [ 8.666260] scsi host9: usb-storage 2-1:1.0 |
| [ 8.667821] usb 3-1.6: new high-speed USB device number 5 using ehci-pci |
| [ 8.747326] usb 3-1.6: New USB device found, idVendor=0424, idProduct=2514, bcdDevice= b.b3 |
| [ 8.748464] usb 3-1.6: New USB device strings: Mfr=0, Product=0, SerialNumber=0 |
| [ 8.750144] hub 3-1.6:1.0: USB hub found |
| [ 8.751376] hub 3-1.6:1.0: 4 ports detected |
| [ 9.037650] usb 3-1.6.2: new high-speed USB device number 6 using ehci-pci |
| [ 9.152686] usb 3-1.6.2: New USB device found, idVendor=0ac8, idProduct=3420, bcdDevice=50.00 |
| [ 9.153842] usb 3-1.6.2: New USB device strings: Mfr=1, Product=2, SerialNumber=0 |
| [ 9.154970] usb 3-1.6.2: Product: Vimicro USB 2.0 PC Camera (Venus) |
| [ 9.156097] usb 3-1.6.2: Manufacturer: Vimicro |
| [ 9.619900] scsi 8:0:0:0: Direct-Access WEM 5 in 1 Card ReCF 1.00 PQ: 0 ANSI: 0 CCS |
| [ 9.622670] sd 8:0:0:0: [sda] Media removed, stopped polling |
| [ 9.624230] sd 8:0:0:0: [sda] Attached SCSI removable disk |
| [ 9.624737] scsi 8:0:0:1: Direct-Access WEM 5 in 1 Card ReMS 1.00 PQ: 0 ANSI: 0 CCS |
| [ 9.628748] sd 8:0:0:1: [sdb] Media removed, stopped polling |
| [ 9.629914] sd 8:0:0:1: [sdb] Attached SCSI removable disk |
| [ 9.630099] scsi 8:0:0:2: Direct-Access WEM 5 in 1 CarMMC/SD 1.00 PQ: 0 ANSI: 0 CCS |
| [ 9.633334] sd 8:0:0:2: [sdc] Media removed, stopped polling |
| [ 9.634380] sd 8:0:0:2: [sdc] Attached SCSI removable disk |
| [ 9.684496] scsi 9:0:0:0: Direct-Access SanDisk Ultra 1.00 PQ: 0 ANSI: 6 |
| [ 9.686656] sd 9:0:0:0: [sdd] 60062500 512-byte logical blocks: (30.8 GB/28.6 GiB) |
| [ 9.689367] sd 9:0:0:0: [sdd] Write Protect is off |
| [ 9.690603] sd 9:0:0:0: [sdd] Mode Sense: 43 00 00 00 |
| [ 9.690994] sd 9:0:0:0: [sdd] Write cache: disabled, read cache: enabled, doesn't support DPO or FUA |
| [ 9.714062] sdd: sdd1 sdd2 sdd3 |
| [ 9.715765] sd 9:0:0:0: [sdd] Attached SCSI removable disk |
| [ 13.236674] EXT4-fs (sdd3): INFO: recovery required on readonly filesystem |
| [ 13.237352] EXT4-fs (sdd3): write access will be enabled during recovery |
| [ 14.532340] EXT4-fs (sdd3): recovery complete |
| [ 14.536185] EXT4-fs (sdd3): mounted filesystem with ordered data mode. Quota mode: none. |
| [ 15.572137] loop0: detected capacity change from 0 to 43128 |
| [ 15.582778] /dev/loop0: Can't open blockdev |
| [ 15.600065] loop1: detected capacity change from 0 to 1189720 |
| [ 15.609756] /dev/loop1: Can't open blockdev |
| [ 15.623243] loop2: detected capacity change from 0 to 412456 |
| [ 15.632660] /dev/loop2: Can't open blockdev |
| [ 15.643831] loop3: detected capacity change from 0 to 1180024 |
| [ 15.654698] /dev/loop3: Can't open blockdev |
| [ 15.667758] loop4: detected capacity change from 0 to 134336 |
| [ 15.677751] /dev/loop4: Can't open blockdev |
| [ 15.688122] loop5: detected capacity change from 0 to 16112 |
| [ 15.696696] /dev/loop5: Can't open blockdev |
| [ 15.706627] loop6: detected capacity change from 0 to 336080 |
| [ 15.715693] /dev/loop6: Can't open blockdev |
| [ 15.730662] loop7: detected capacity change from 0 to 2445880 |
| [ 15.740699] /dev/loop7: Can't open blockdev |
| [ 15.754024] loop8: detected capacity change from 0 to 1258568 |
| [ 15.763706] /dev/loop8: Can't open blockdev |
| [ 15.777750] loop9: detected capacity change from 0 to 289216 |
| [ 15.793658] /dev/loop9: Can't open blockdev |
| [ 15.841441] loop10: detected capacity change from 0 to 324528 |
| [ 15.848656] /dev/loop10: Can't open blockdev |
| [ 15.905437] loop11: detected capacity change from 0 to 13328 |
| [ 15.912671] /dev/loop11: Can't open blockdev |
| [ 15.957149] loop12: detected capacity change from 0 to 978720 |
| [ 15.963647] /dev/loop12: Can't open blockdev |
| [ 15.979994] loop13: detected capacity change from 0 to 651160 |
| [ 15.988633] /dev/loop13: Can't open blockdev |
| [ 16.039803] loop14: detected capacity change from 0 to 45864 |
| [ 16.050680] /dev/loop14: Can't open blockdev |
| [ 16.105566] loop15: detected capacity change from 0 to 7960 |
| [ 16.111645] /dev/loop15: Can't open blockdev |
| [ 16.134916] loop16: detected capacity change from 0 to 192 |
| [ 16.147776] /dev/loop16: Can't open blockdev |
| [ 16.156080] loop17: detected capacity change from 0 to 7576 |
| [ 16.165694] /dev/loop17: Can't open blockdev |
| [ 16.179923] loop18: detected capacity change from 0 to 16344 |
| [ 16.190700] /dev/loop18: Can't open blockdev |
| [ 16.239119] EXT4-fs (sdd3): re-mounted. Quota mode: none. |
| [ 17.231296] udevd[1234]: starting eudev-3.2.11 |
| [ 17.330620] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input3 |
| [ 17.336636] ACPI: button: Power Button [PWRF] |
| [ 17.456931] ACPI Warning: SystemIO range 0x0000000000000528-0x000000000000052F conflicts with OpRegion 0x0000000000000500-0x000000000000057F (\PMIO) (20220331/utaddress-204) |
| [ 17.457560] ACPI: OSL: Resource conflict; ACPI support missing from driver? |
| [ 17.458173] ACPI Warning: SystemIO range 0x00000000000004C0-0x00000000000004CF conflicts with OpRegion 0x0000000000000480-0x00000000000004EB (\GPIO) (20220331/utaddress-204) |
| [ 17.458802] ACPI: OSL: Resource conflict; ACPI support missing from driver? |
| [ 17.459422] ACPI Warning: SystemIO range 0x00000000000004B0-0x00000000000004BF conflicts with OpRegion 0x0000000000000480-0x00000000000004EB (\GPIO) (20220331/utaddress-204) |
| [ 17.460063] ACPI: OSL: Resource conflict; ACPI support missing from driver? |
| [ 17.460695] ACPI Warning: SystemIO range 0x0000000000000480-0x00000000000004AF conflicts with OpRegion 0x0000000000000480-0x00000000000004EB (\GPIO) (20220331/utaddress-204) |
| [ 17.461385] ACPI: OSL: Resource conflict; ACPI support missing from driver? |
| [ 17.462051] lpc_ich: Resource conflict(s) found affecting gpio_ich |
| [ 17.477111] i801_smbus 0000:00:1f.3: SMBus using PCI interrupt |
| [ 17.477897] i2c i2c-0: 4/4 memory slots populated (from DMI) |
| [ 17.478847] i2c i2c-0: Successfully instantiated SPD at 0x50 |
| [ 17.479782] i2c i2c-0: Successfully instantiated SPD at 0x51 |
| [ 17.480709] i2c i2c-0: Successfully instantiated SPD at 0x52 |
| [ 17.481633] i2c i2c-0: Successfully instantiated SPD at 0x53 |
| [ 17.507958] RAPL PMU: API unit is 2^-32 Joules, 3 fixed counters, 163840 ms ovfl timer |
| [ 17.508594] RAPL PMU: hw unit of domain pp0-core 2^-16 Joules |
| [ 17.509217] RAPL PMU: hw unit of domain package 2^-16 Joules |
| [ 17.509833] RAPL PMU: hw unit of domain pp1-gpu 2^-16 Joules |
| [ 17.537009] Linux agpgart interface v0.103 |
| [ 17.612888] r8169 0000:04:00.0 eth0: RTL8168evl/8111evl, bc:5f:f4:5d:86:1a, XID 2c9, IRQ 35 |
| [ 17.613521] r8169 0000:04:00.0 eth0: jumbo features [frames: 9194 bytes, tx checksumming: ko] |
| [ 17.635247] ACPI: bus type drm_connector registered |
| [ 17.724602] mc: Linux media interface: v0.10 |
| [ 17.794459] videodev: Linux video capture interface: v2.00 |
| [ 18.184411] Console: switching to colour dummy device 80x25 |
| [ 18.184452] i915 0000:00:02.0: vgaarb: deactivate vga console |
| [ 18.185272] at24 0-0050: supply vcc not found, using dummy regulator |
| [ 18.185865] at24 0-0050: 256 byte spd EEPROM, read-only |
| [ 18.185911] at24 0-0051: supply vcc not found, using dummy regulator |
| [ 18.186455] at24 0-0051: 256 byte spd EEPROM, read-only |
| [ 18.186471] at24 0-0052: supply vcc not found, using dummy regulator |
| [ 18.187009] at24 0-0052: 256 byte spd EEPROM, read-only |
| [ 18.187028] at24 0-0053: supply vcc not found, using dummy regulator |
| [ 18.187572] at24 0-0053: 256 byte spd EEPROM, read-only |
| [ 18.199877] intel_rapl_common: Found RAPL domain package |
| [ 18.199885] intel_rapl_common: Found RAPL domain core |
| [ 18.199887] intel_rapl_common: Found RAPL domain uncore |
| [ 18.244343] r8169 0000:04:00.0 eth126: renamed from eth0 |
| [ 18.247729] r8169 0000:04:00.0 eth1: renamed from eth126 |
| [ 18.252871] [drm] Initialized i915 1.6.0 20201103 for 0000:00:02.0 on minor 0 |
| [ 18.253045] snd_hda_intel 0000:00:1b.0: bound 0000:00:02.0 (ops i915_audio_component_bind_ops [i915]) |
| [ 18.506191] fbcon: i915drmfb (fb0) is primary device |
| [ 18.606389] Console: switching to colour frame buffer device 240x75 |
| [ 18.626855] i915 0000:00:02.0: [drm] fb0: i915drmfb frame buffer device |
| [ 18.662264] snd_hda_codec_realtek hdaudioC0D0: autoconfig for ALC892: line_outs=3 (0x14/0x15/0x16/0x0/0x0) type:line |
| [ 18.662298] snd_hda_codec_realtek hdaudioC0D0: speaker_outs=0 (0x0/0x0/0x0/0x0/0x0) |
| [ 18.662313] snd_hda_codec_realtek hdaudioC0D0: hp_outs=1 (0x1b/0x0/0x0/0x0/0x0) |
| [ 18.662328] snd_hda_codec_realtek hdaudioC0D0: mono: mono_out=0x0 |
| [ 18.662339] snd_hda_codec_realtek hdaudioC0D0: dig-out=0x1e/0x0 |
| [ 18.662350] snd_hda_codec_realtek hdaudioC0D0: inputs: |
| [ 18.662361] snd_hda_codec_realtek hdaudioC0D0: Front Mic=0x19 |
| [ 18.662373] snd_hda_codec_realtek hdaudioC0D0: Rear Mic=0x18 |
| [ 18.662385] snd_hda_codec_realtek hdaudioC0D0: Line=0x1a |
| [ 18.677301] input: HDA Intel PCH Rear Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input5 |
| [ 18.677357] input: HDA Intel PCH Line as /devices/pci0000:00/0000:00:1b.0/sound/card0/input6 |
| [ 18.679367] input: HDA Intel PCH Line Out Front as /devices/pci0000:00/0000:00:1b.0/sound/card0/input7 |
| [ 18.679432] input: HDA Intel PCH Line Out Surround as /devices/pci0000:00/0000:00:1b.0/sound/card0/input8 |
| [ 18.679485] input: HDA Intel PCH Line Out CLFE as /devices/pci0000:00/0000:00:1b.0/sound/card0/input9 |
| [ 18.681692] input: HDA Intel PCH HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:1b.0/sound/card0/input10 |
| [ 18.682151] input: HDA Intel PCH HDMI/DP,pcm=7 as /devices/pci0000:00/0000:00:1b.0/sound/card0/input11 |
| [ 23.128015] usbcore: registered new interface driver snd-usb-audio |
| [ 23.128858] usb 3-1.6.2: Found UVC 1.00 device Vimicro USB 2.0 PC Camera (Venus) (0ac8:3420) |
| [ 23.133707] input: Vimicro USB 2.0 PC Camera (Venu as /devices/pci0000:00/0000:00:1a.0/usb3/3-1/3-1.6/3-1.6.2/3-1.6.2:1.0/input/input12 |
| [ 23.133949] usbcore: registered new interface driver uvcvideo |
| [ 24.045632] NET: Registered PF_INET6 protocol family |
| [ 24.048933] Segment Routing with IPv6 |
| [ 24.048936] RPL Segment Routing with IPv6 |
| [ 24.048944] In-situ OAM (IOAM) with IPv6 |
| [ 26.665539] RTL8211E Gigabit Ethernet r8169-0-400:00: attached PHY driver (mii_bus:phy_addr=r8169-0-400:00, irq=MAC) |
| [ 26.878502] r8169 0000:04:00.0 eth1: Link is Down |
| [ 29.194552] r8169 0000:04:00.0 eth1: Link is Up - 1Gbps/Full - flow control rx/tx |
| [ 29.194567] IPv6: ADDRCONF(NETDEV_CHANGE): eth1: link becomes ready |
| [ 31.100102] fuse: init (API version 7.36) |