| [ 0.000000] Linux version 5.2.0-rc5-00045-g0618879ba012 (root@ee888abba79b) (gcc version 8.3.0 (Debian 8.3.0-7)) #52 SMP Mon Jun 17 21:35:47 UTC 2019 |
| [ 0.000000] x86/fpu: x87 FPU will use FXSAVE |
| [ 0.000000] BIOS-provided physical RAM map: |
| [ 0.000000] BIOS-e820: [mem 0x0000000000000000-0x0000000000000fff] type 16 |
| [ 0.000000] BIOS-e820: [mem 0x0000000000001000-0x000000000009ffff] usable |
| [ 0.000000] BIOS-e820: [mem 0x00000000000c0000-0x00000000000fffff] reserved |
| [ 0.000000] BIOS-e820: [mem 0x0000000000100000-0x00000000c7d43fff] usable |
| [ 0.000000] BIOS-e820: [mem 0x00000000c7d44000-0x00000000c7ffffff] type 16 |
| [ 0.000000] BIOS-e820: [mem 0x00000000c8000000-0x00000000dfffffff] reserved |
| [ 0.000000] BIOS-e820: [mem 0x00000000f8000000-0x00000000fbffffff] reserved |
| [ 0.000000] BIOS-e820: [mem 0x0000000100000000-0x000000011effffff] usable |
| [ 0.000000] kmemleak: Kernel memory leak detector disabled |
| [ 0.000000] NX (Execute Disable) protection: active |
| [ 0.000000] SMBIOS 2.7 present. |
| [ 0.000000] DMI: ASROCK E350M1/E350M1, BIOS 4.9-2044-g913d8b5e45 06/17/2019 |
| [ 0.000000] tsc: Fast TSC calibration using PIT |
| [ 0.000000] tsc: Detected 1600.066 MHz processor |
| [ 0.005998] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved |
| [ 0.006003] e820: remove [mem 0x000a0000-0x000fffff] usable |
| [ 0.006014] last_pfn = 0x11f000 max_arch_pfn = 0x1000000 |
| [ 0.006024] MTRR default type: uncachable |
| [ 0.006026] MTRR fixed ranges enabled: |
| [ 0.006030] 00000-9FFFF write-back |
| [ 0.006032] A0000-BFFFF uncachable |
| [ 0.006035] C0000-FFFFF write-back |
| [ 0.006036] MTRR variable ranges enabled: |
| [ 0.006040] 0 base 0FFC00000 mask FFFC00000 write-protect |
| [ 0.006043] 1 base 0C0000000 mask FF8000000 write-back |
| [ 0.006046] 2 base 080000000 mask FC0000000 write-back |
| [ 0.006048] 3 base 000000000 mask F80000000 write-back |
| [ 0.006049] 4 disabled |
| [ 0.006051] 5 disabled |
| [ 0.006052] 6 disabled |
| [ 0.006053] 7 disabled |
| [ 0.006056] TOM2: 000000011f000000 aka 4592M |
| [ 0.006256] x86/PAT: Configuration [0-7]: WB WC UC- UC WB WP UC- WT |
| [ 0.006345] initial memory mapped: [mem 0x00000000-0x1c3fffff] |
| [ 0.006503] BRK [0x1bf19000, 0x1bf19fff] PGTABLE |
| [ 0.006524] BRK [0x1bf1a000, 0x1bf1afff] PGTABLE |
| [ 0.006536] ACPI: Early table checksum verification disabled |
| [ 0.006653] ACPI: RSDP 0x00000000000F0800 000024 (v02 COREv4) |
| [ 0.006660] ACPI: XSDT 0x00000000C7D450E0 000064 (v01 COREv4 COREBOOT 00000000 CORE 20190509) |
| [ 0.006673] ACPI: FACP 0x00000000C7D477D0 0000F4 (v04 COREv4 COREBOOT 00000000 CORE 20190509) |
| [ 0.006686] ACPI: DSDT 0x00000000C7D45280 002549 (v02 COREv4 COREBOOT 00010001 INTL 20190509) |
| [ 0.006693] ACPI: FACS 0x00000000C7D45240 000040 |
| [ 0.006698] ACPI: FACS 0x00000000C7D45240 000040 |
| [ 0.006703] ACPI: SSDT 0x00000000C7D478D0 00008A (v02 COREv4 COREBOOT 0000002A CORE 20190509) |
| [ 0.006709] ACPI: APIC 0x00000000C7D47960 00005C (v02 COREv4 COREBOOT 00000000 CORE 20190509) |
| [ 0.006715] ACPI: HEST 0x00000000C7D479C0 000028 (v01 COREv4 COREBOOT 00000000 CORE 20190509) |
| [ 0.006721] ACPI: SSDT 0x00000000C7D479F0 00168E (v02 AMD ALIB 00000001 MSFT 04000000) |
| [ 0.006727] ACPI: SSDT 0x00000000C7D49080 0003DE (v01 AMD POWERNOW 00000001 AMD 00000001) |
| [ 0.006734] ACPI: VFCT 0x00000000C7D49460 00E269 (v01 COREv4 COREBOOT 00000000 CORE 20190509) |
| [ 0.006740] ACPI: HPET 0x00000000C7D576D0 000038 (v01 COREv4 COREBOOT 00000000 CORE 20190509) |
| [ 0.006758] ACPI: Local APIC address 0xfee00000 |
| [ 0.006766] 3706MB HIGHMEM available. |
| [ 0.006770] 885MB LOWMEM available. |
| [ 0.006772] mapped low ram: 0 - 375fe000 |
| [ 0.006773] low ram: 0 - 375fe000 |
| [ 0.006786] BRK [0x1bf1b000, 0x1bf1bfff] PGTABLE |
| [ 0.017530] Zone ranges: |
| [ 0.017534] DMA [mem 0x0000000000001000-0x0000000000ffffff] |
| [ 0.017539] Normal [mem 0x0000000001000000-0x00000000375fdfff] |
| [ 0.017542] HighMem [mem 0x00000000375fe000-0x000000011effffff] |
| [ 0.017545] Movable zone start for each node |
| [ 0.017546] Early memory node ranges |
| [ 0.017548] node 0: [mem 0x0000000000001000-0x000000000009ffff] |
| [ 0.017550] node 0: [mem 0x0000000000100000-0x00000000c7d43fff] |
| [ 0.017552] node 0: [mem 0x0000000100000000-0x000000011effffff] |
| [ 0.021730] Zeroed struct page in unavailable ranges: 99101 pages |
| [ 0.021735] Initmem setup node 0 [mem 0x0000000000001000-0x000000011effffff] |
| [ 0.021740] On node 0 totalpages: 945379 |
| [ 0.021743] DMA zone: 40 pages used for memmap |
| [ 0.021745] DMA zone: 0 pages reserved |
| [ 0.021747] DMA zone: 3999 pages, LIFO batch:0 |
| [ 0.021942] Normal zone: 2175 pages used for memmap |
| [ 0.021944] Normal zone: 222718 pages, LIFO batch:63 |
| [ 0.032376] HighMem zone: 718662 pages, LIFO batch:63 |
| [ 0.071568] Using APIC driver default |
| [ 0.071847] ACPI: Local APIC address 0xfee00000 |
| [ 0.071871] IOAPIC[0]: apic_id 2, version 33, address 0xfec00000, GSI 0-23 |
| [ 0.071876] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) |
| [ 0.071880] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 low level) |
| [ 0.071883] ACPI: IRQ0 used by override. |
| [ 0.071886] ACPI: IRQ9 used by override. |
| [ 0.071889] Using ACPI (MADT) for SMP configuration information |
| [ 0.071893] ACPI: HPET id: 0x43538210 base: 0xfed00000 |
| [ 0.071904] smpboot: Allowing 2 CPUs, 0 hotplug CPUs |
| [ 0.071931] [mem 0xe0000000-0xf7ffffff] available for PCI devices |
| [ 0.071939] clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 1910969940391419 ns |
| [ 0.071943] After setup_arch |
| [ 0.071944] After mm_init_cpumask |
| [ 0.071953] After setup_command_line |
| [ 0.071954] After setup_nr_cpu_ids |
| [ 0.071957] setup_percpu: NR_CPUS:2 nr_cpumask_bits:2 nr_cpu_ids:2 nr_node_ids:1 |
| [ 0.072219] percpu: Embedded 33 pages/cpu s102668 r0 d32500 u135168 |
| [ 0.072233] pcpu-alloc: s102668 r0 d32500 u135168 alloc=33*4096 |
| [ 0.072235] pcpu-alloc: [0] 0 [0] 1 |
| [ 0.072262] After setup_per_cpu_areas |
| [ 0.072264] After smp_perpare_boot_cpu |
| [ 0.072265] After boot_cpu_hotplug_init |
| [ 0.072271] Built 1 zonelists, mobility grouping on. Total pages: 943164 |
| [ 0.072275] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-5.2.0-rc5-00045-g0618879ba012 root=/dev/sda1 rw noisapnp cryptomgr.notests quiet iomem=relaxed apparmor=0 selinux=0 kmemleak=off initcall_blacklist=serial8250_init udev.children_max=2 udev.log_priority=info |
| [ 0.072543] blacklisting initcall serial8250_init |
| [ 0.072894] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes) |
| [ 0.073068] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes) |
| [ 0.073079] Initializing CPU#0 |
| [ 0.107777] Initializing HighMem for node 0 (000375fe:0011f000) |
| [ 0.107781] add_highpages_with_active_regions: start_pfn = 226814, end_pfn = 1175552 |
| [ 0.107785] add_highpages_with_active_regions: for_each_free_mem_range: i = 8589934592, nid = 0, pfn = 226814, e_pfn = 226814, before for loop |
| [ 0.107788] add_highpages_with_active_regions: for_each_free_mem_range: i = 12884901889, nid = 0, pfn = 226814, e_pfn = 226814, before for loop |
| [ 0.107791] add_highpages_with_active_regions: for_each_free_mem_range: i = 17179869185, nid = 0, pfn = 226814, e_pfn = 226814, before for loop |
| [ 0.107793] add_highpages_with_active_regions: for_each_free_mem_range: i = 21474836481, nid = 0, pfn = 226814, e_pfn = 226814, before for loop |
| [ 0.107796] add_highpages_with_active_regions: for_each_free_mem_range: i = 25769803777, nid = 0, pfn = 226814, e_pfn = 226814, before for loop |
| [ 0.107798] add_highpages_with_active_regions: for_each_free_mem_range: i = 30064771073, nid = 0, pfn = 226814, e_pfn = 226814, before for loop |
| [ 0.107800] add_highpages_with_active_regions: for_each_free_mem_range: i = 34359738369, nid = 0, pfn = 226814, e_pfn = 226814, before for loop |
| [ 0.107803] add_highpages_with_active_regions: for_each_free_mem_range: i = 38654705665, nid = 0, pfn = 226814, e_pfn = 226814, before for loop |
| [ 0.107805] add_highpages_with_active_regions: for_each_free_mem_range: i = 42949672961, nid = 0, pfn = 226814, e_pfn = 226814, before for loop |
| [ 0.107807] add_highpages_with_active_regions: for_each_free_mem_range: i = 47244640257, nid = 0, pfn = 226814, e_pfn = 226814, before for loop |
| [ 0.107810] add_highpages_with_active_regions: for_each_free_mem_range: i = 51539607553, nid = 0, pfn = 226814, e_pfn = 226814, before for loop |
| [ 0.107812] add_highpages_with_active_regions: for_each_free_mem_range: i = 55834574849, nid = 0, pfn = 226814, e_pfn = 226814, before for loop |
| [ 0.107814] add_highpages_with_active_regions: for_each_free_mem_range: i = 60129542145, nid = 0, pfn = 226814, e_pfn = 226814, before for loop |
| [ 0.107817] add_highpages_with_active_regions: for_each_free_mem_range: i = 64424509441, nid = 0, pfn = 226814, e_pfn = 226814, before for loop |
| [ 0.107819] add_highpages_with_active_regions: for_each_free_mem_range: i = 68719476737, nid = 0, pfn = 226814, e_pfn = 226814, before for loop |
| [ 0.107822] add_highpages_with_active_regions: for_each_free_mem_range: i = 73014444033, nid = 0, pfn = 226814, e_pfn = 226814, before for loop |
| [ 0.107824] add_highpages_with_active_regions: for_each_free_mem_range: i = 77309411329, nid = 0, pfn = 226814, e_pfn = 226814, before for loop |
| [ 0.107826] add_highpages_with_active_regions: for_each_free_mem_range: i = 81604378625, nid = 0, pfn = 226814, e_pfn = 226814, before for loop |
| [ 0.107829] add_highpages_with_active_regions: for_each_free_mem_range: i = 85899345921, nid = 0, pfn = 226814, e_pfn = 226814, before for loop |
| [ 0.107831] add_highpages_with_active_regions: for_each_free_mem_range: i = 90194313217, nid = 0, pfn = 226814, e_pfn = 226814, before for loop |
| [ 0.107834] add_highpages_with_active_regions: for_each_free_mem_range: i = 90194313218, nid = 0, pfn = 226814, e_pfn = 818500, before for loop |
| [ 0.294117] add_highpages_with_active_regions: for_each_free_mem_range: i = 90194313219, nid = 0, pfn = 1048576, e_pfn = 1175552, before for loop |
| [ 0.334047] Initializing Movable for node 0 (00000000:00000000) |
| [ 0.334051] add_highpages_with_active_regions: start_pfn = 0, end_pfn = 0 |
| [ 0.334054] add_highpages_with_active_regions: for_each_free_mem_range: i = 8589934592, nid = 0, pfn = 0, e_pfn = 0, before for loop |
| [ 0.334056] add_highpages_with_active_regions: for_each_free_mem_range: i = 12884901889, nid = 0, pfn = 0, e_pfn = 0, before for loop |
| [ 0.334059] add_highpages_with_active_regions: for_each_free_mem_range: i = 17179869185, nid = 0, pfn = 0, e_pfn = 0, before for loop |
| [ 0.334061] add_highpages_with_active_regions: for_each_free_mem_range: i = 21474836481, nid = 0, pfn = 0, e_pfn = 0, before for loop |
| [ 0.334063] add_highpages_with_active_regions: for_each_free_mem_range: i = 25769803777, nid = 0, pfn = 0, e_pfn = 0, before for loop |
| [ 0.334066] add_highpages_with_active_regions: for_each_free_mem_range: i = 30064771073, nid = 0, pfn = 0, e_pfn = 0, before for loop |
| [ 0.334068] add_highpages_with_active_regions: for_each_free_mem_range: i = 34359738369, nid = 0, pfn = 0, e_pfn = 0, before for loop |
| [ 0.334070] add_highpages_with_active_regions: for_each_free_mem_range: i = 38654705665, nid = 0, pfn = 0, e_pfn = 0, before for loop |
| [ 0.334073] add_highpages_with_active_regions: for_each_free_mem_range: i = 42949672961, nid = 0, pfn = 0, e_pfn = 0, before for loop |
| [ 0.334075] add_highpages_with_active_regions: for_each_free_mem_range: i = 47244640257, nid = 0, pfn = 0, e_pfn = 0, before for loop |
| [ 0.334077] add_highpages_with_active_regions: for_each_free_mem_range: i = 51539607553, nid = 0, pfn = 0, e_pfn = 0, before for loop |
| [ 0.334080] add_highpages_with_active_regions: for_each_free_mem_range: i = 55834574849, nid = 0, pfn = 0, e_pfn = 0, before for loop |
| [ 0.334082] add_highpages_with_active_regions: for_each_free_mem_range: i = 60129542145, nid = 0, pfn = 0, e_pfn = 0, before for loop |
| [ 0.334084] add_highpages_with_active_regions: for_each_free_mem_range: i = 64424509441, nid = 0, pfn = 0, e_pfn = 0, before for loop |
| [ 0.334086] add_highpages_with_active_regions: for_each_free_mem_range: i = 68719476737, nid = 0, pfn = 0, e_pfn = 0, before for loop |
| [ 0.334089] add_highpages_with_active_regions: for_each_free_mem_range: i = 73014444033, nid = 0, pfn = 0, e_pfn = 0, before for loop |
| [ 0.334091] add_highpages_with_active_regions: for_each_free_mem_range: i = 77309411329, nid = 0, pfn = 0, e_pfn = 0, before for loop |
| [ 0.334093] add_highpages_with_active_regions: for_each_free_mem_range: i = 81604378625, nid = 0, pfn = 0, e_pfn = 0, before for loop |
| [ 0.334095] add_highpages_with_active_regions: for_each_free_mem_range: i = 85899345921, nid = 0, pfn = 0, e_pfn = 0, before for loop |
| [ 0.334098] add_highpages_with_active_regions: for_each_free_mem_range: i = 90194313217, nid = 0, pfn = 0, e_pfn = 0, before for loop |
| [ 0.334100] add_highpages_with_active_regions: for_each_free_mem_range: i = 90194313218, nid = 0, pfn = 0, e_pfn = 0, before for loop |
| [ 0.334103] add_highpages_with_active_regions: for_each_free_mem_range: i = 90194313219, nid = 0, pfn = 0, e_pfn = 0, before for loop |
| [ 0.340312] Memory: 3645732K/3781516K available (8966K kernel code, 746K rwdata, 2912K rodata, 1144K init, 640K bss, 135784K reserved, 0K cma-reserved, 2874648K highmem) |
| [ 0.340323] virtual kernel memory layout: |
| fixmap : 0xfff91000 - 0xfffff000 ( 440 kB) |
| cpu_entry : 0xffa00000 - 0xffa4d000 ( 308 kB) |
| pkmap : 0xff600000 - 0xff800000 (2048 kB) |
| vmalloc : 0xf7dfe000 - 0xff5fe000 ( 120 MB) |
| lowmem : 0xc0000000 - 0xf75fe000 ( 885 MB) |
| .init : 0xdbc6f000 - 0xdbd8d000 (1144 kB) |
| .data : 0xdb8c1898 - 0xdbc5c9c0 (3692 kB) |
| .text : 0xdb000000 - 0xdb8c1898 (8966 kB) |
| [ 0.340325] Checking if this processor honours the WP bit even in supervisor mode...Ok. |
| [ 0.340478] random: get_random_u32 called from cache_random_seq_create+0x7e/0x110 with crng_init=0 |
| [ 0.340753] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=2, Nodes=1 |
| [ 0.340785] After mm_init |
| [ 0.340788] ftrace: allocating 34258 entries in 67 pages |
| [ 0.367417] After sched_init |
| [ 0.367480] rcu: Hierarchical RCU implementation. |
| [ 0.367481] rcu: RCU event tracing is enabled. |
| [ 0.367485] rcu: RCU calculated value of scheduler-enlistment delay is 100 jiffies. |
| [ 0.367495] After rcu_init |
| [ 0.374474] NR_IRQS: 2304, nr_irqs: 440, preallocated irqs: 16 |
| [ 0.375039] After add_latent_entropy |
| [ 0.375056] After add_device_randomness |
| [ 0.375059] After boot_init_stack_canary |
| [ 0.377537] Console: colour VGA+ 80x25 |
| [ 0.377550] printk: console [tty0] enabled |
| [ 0.377598] ACPI: Core revision 20190509 |
| [ 0.378173] clocksource: hpet: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 133484873504 ns |
| [ 0.378192] hpet clockevent registered |
| [ 0.378201] APIC: Switch to symmetric I/O mode setup |
| [ 0.378202] Enabling APIC mode: Flat. Using 1 I/O APICs |
| [ 0.378712] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=0 pin2=0 |
| [ 0.383275] clocksource: tsc-early: mask: 0xffffffffffffffff max_cycles: 0x17106371a14, max_idle_ns: 440795284681 ns |
| [ 0.383286] Calibrating delay loop (skipped), value calculated using timer frequency.. 3200.13 BogoMIPS (lpj=1600066) |
| [ 0.383292] pid_max: default: 32768 minimum: 301 |
| [ 0.383382] LSM: Security Framework initializing |
| [ 0.383421] Mount-cache hash table entries: 2048 (order: 1, 8192 bytes) |
| [ 0.383427] Mountpoint-cache hash table entries: 2048 (order: 1, 8192 bytes) |
| [ 0.383746] *** VALIDATE proc *** |
| [ 0.383859] *** VALIDATE cgroup1 *** |
| [ 0.383863] *** VALIDATE cgroup2 *** |
| [ 0.383956] Last level iTLB entries: 4KB 512, 2MB 8, 4MB 4 |
| [ 0.383958] Last level dTLB entries: 4KB 512, 2MB 8, 4MB 4, 1GB 0 |
| [ 0.383963] Spectre V2 : Mitigation: Full AMD retpoline |
| [ 0.383965] Spectre V2 : Spectre v2 / SpectreRSB mitigation: Filling RSB on context switch |
| [ 0.383967] Speculative Store Bypass: Vulnerable |
| [ 0.384202] Freeing SMP alternatives memory: 32K |
| [ 0.384205] After check_bugs |
| [ 0.384209] After acpi_subsystem_init |
| [ 0.384211] After arch_post_acpi_subsys_init |
| [ 0.384212] After sfi_init_late |
| [ 0.384214] After rcu_scheduler_starting |
| [ 0.384359] After find_task_by_pid_ns |
| [ 0.384361] After numa_default_policy |
| [ 0.384396] After rcu_read_lock |
| [ 0.384397] After rcu_read_unlock |
| [ 0.384403] After kthreadd_done |
| [ 0.385279] random: 1 |
| [ 0.385279] random: 2 |
| [ 0.385279] random: 3 |
| [ 0.385279] random: 4 |
| [ 0.404282] random: 1 |
| [ 0.404282] random: 2 |
| [ 0.404284] random: 3 |
| [ 0.404284] random: 4 |
| [ 0.468282] random: 1 |
| [ 0.468282] random: 2 |
| [ 0.468284] random: 3 |
| [ 0.468285] random: 4 |
| [ 0.486279] smpboot: CPU0: AMD E-350D APU with Radeon(tm) HD Graphics (family: 0x14, model: 0x2, stepping: 0x0) |
| [ 0.486279] Performance Events: AMD PMU driver. |
| [ 0.486279] ... version: 0 |
| [ 0.486279] ... bit width: 48 |
| [ 0.486279] ... generic registers: 4 |
| [ 0.486279] ... value mask: 0000ffffffffffff |
| [ 0.486279] ... max period: 00007fffffffffff |
| [ 0.486279] ... fixed-purpose events: 0 |
| [ 0.486279] ... event mask: 000000000000000f |
| [ 0.486279] rcu: Hierarchical SRCU implementation. |
| [ 0.486491] smp: Bringing up secondary CPUs ... |
| [ 0.486757] x86: Booting SMP configuration: |
| [ 0.486760] .... node #0, CPUs: #1 |
| [ 0.004327] Initializing CPU#1 |
| [ 0.487337] After schedule_preempt_disabled |
| [ 0.487361] smp: Brought up 1 node, 2 CPUs |
| [ 0.487361] smpboot: Max logical packages: 1 |
| [ 0.487361] smpboot: Total of 2 processors activated (6400.26 BogoMIPS) |
| [ 0.489387] devtmpfs: initialized |
| [ 0.490288] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 1911260446275000 ns |
| [ 0.490288] futex hash table entries: 512 (order: 3, 32768 bytes) |
| [ 0.490288] pinctrl core: initialized pinctrl subsystem |
| [ 0.490288] PM: RTC time: 22:13:51, date: 2019-06-17 |
| [ 0.490288] NET: Registered protocol family 16 |
| [ 0.490630] audit: initializing netlink subsys (disabled) |
| [ 0.491355] audit: type=2000 audit(1560809631.113:1): state=initialized audit_enabled=0 res=1 |
| [ 0.491535] cpuidle: using governor menu |
| [ 0.491542] ACPI: bus type PCI registered |
| [ 0.492650] PCI: Using configuration type 1 for base access |
| [ 0.492651] PCI: Using configuration type 1 for extended access |
| [ 0.492966] mtrr: your CPUs had inconsistent variable MTRR settings |
| [ 0.492967] mtrr: probably your BIOS does not setup all CPUs. |
| [ 0.492968] mtrr: corrected configuration. |
| [ 0.497378] HugeTLB registered 2.00 MiB page size, pre-allocated 0 pages |
| [ 0.497381] alg: self-tests disabled |
| [ 0.499351] cryptd: max_cpu_qlen set to 1000 |
| [ 0.502315] ACPI: Added _OSI(Module Device) |
| [ 0.502315] ACPI: Added _OSI(Processor Device) |
| [ 0.502315] ACPI: Added _OSI(3.0 _SCP Extensions) |
| [ 0.502315] ACPI: Added _OSI(Processor Aggregator Device) |
| [ 0.502315] ACPI: Added _OSI(Linux-Dell-Video) |
| [ 0.502315] ACPI: Added _OSI(Linux-Lenovo-NV-HDMI-Audio) |
| [ 0.502315] ACPI: Added _OSI(Linux-HPI-Hybrid-Graphics) |
| [ 0.513172] ACPI: 4 ACPI AML tables successfully acquired and loaded |
| [ 0.515996] ACPI: Interpreter enabled |
| [ 0.516039] ACPI: (supports S0 S1 S3 S5) |
| [ 0.516043] ACPI: Using IOAPIC for interrupt routing |
| [ 0.516077] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug |
| [ 0.516572] ACPI: Enabled 18 GPEs in block 00 to 1F |
| [ 0.526337] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff]) |
| [ 0.526352] acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI HPX-Type3] |
| [ 0.526519] acpi PNP0A08:00: _OSC: OS now controls [PME AER PCIeCapability LTR] |
| [ 0.526965] PCI host bridge to bus 0000:00 |
| [ 0.526970] pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7 window] |
| [ 0.526974] pci_bus 0000:00: root bus resource [io 0x0d00-0xffff window] |
| [ 0.526978] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff] |
| [ 0.526981] pci_bus 0000:00: root bus resource [mem 0xe0000000-0xffffffff] |
| [ 0.526984] pci_bus 0000:00: root bus resource [bus 00-ff] |
| [ 0.527003] pci 0000:00:00.0: [1022:1510] type 00 class 0x060000 |
| [ 0.527291] pci 0000:00:01.0: [1002:9802] type 00 class 0x030000 |
| [ 0.527315] pci 0000:00:01.0: reg 0x10: [mem 0xe0000000-0xefffffff pref] |
| [ 0.527325] pci 0000:00:01.0: reg 0x14: [io 0x2000-0x20ff] |
| [ 0.527334] pci 0000:00:01.0: reg 0x18: [mem 0xf0100000-0xf013ffff] |
| [ 0.527365] pci 0000:00:01.0: enabling Extended Tags |
| [ 0.527417] pci 0000:00:01.0: supports D1 D2 |
| [ 0.527656] pci 0000:00:01.1: [1002:1314] type 00 class 0x040300 |
| [ 0.527677] pci 0000:00:01.1: reg 0x10: [mem 0xf0140000-0xf0143fff] |
| [ 0.527720] pci 0000:00:01.1: enabling Extended Tags |
| [ 0.527768] pci 0000:00:01.1: supports D1 D2 |
| [ 0.528103] pci 0000:00:11.0: [1002:4391] type 00 class 0x010601 |
| [ 0.528133] pci 0000:00:11.0: reg 0x10: [io 0x2410-0x2417] |
| [ 0.528146] pci 0000:00:11.0: reg 0x14: [io 0x2420-0x2423] |
| [ 0.528160] pci 0000:00:11.0: reg 0x18: [io 0x2418-0x241f] |
| [ 0.528173] pci 0000:00:11.0: reg 0x1c: [io 0x2424-0x2427] |
| [ 0.528186] pci 0000:00:11.0: reg 0x20: [io 0x2400-0x240f] |
| [ 0.528200] pci 0000:00:11.0: reg 0x24: [mem 0xf014b000-0xf014b3ff] |
| [ 0.528556] pci 0000:00:12.0: [1002:4397] type 00 class 0x0c0310 |
| [ 0.528582] pci 0000:00:12.0: reg 0x10: [mem 0xf0148000-0xf0148fff] |
| [ 0.528954] pci 0000:00:12.2: [1002:4396] type 00 class 0x0c0320 |
| [ 0.528983] pci 0000:00:12.2: reg 0x10: [mem 0xf014c000-0xf014c0ff] |
| [ 0.529095] pci 0000:00:12.2: supports D1 D2 |
| [ 0.529098] pci 0000:00:12.2: PME# supported from D0 D1 D2 D3hot |
| [ 0.529100] pci 0000:00:12.2: pme_poll = true |
| [ 0.529103] pci 0000:00:12.2: after device_set_wakeup_capable() |
| [ 0.529109] pci 0000:00:12.2: after pci_pme_active() |
| [ 0.529420] pci 0000:00:13.0: [1002:4397] type 00 class 0x0c0310 |
| [ 0.529446] pci 0000:00:13.0: reg 0x10: [mem 0xf0149000-0xf0149fff] |
| [ 0.529820] pci 0000:00:13.2: [1002:4396] type 00 class 0x0c0320 |
| [ 0.529849] pci 0000:00:13.2: reg 0x10: [mem 0xf014d000-0xf014d0ff] |
| [ 0.529961] pci 0000:00:13.2: supports D1 D2 |
| [ 0.529964] pci 0000:00:13.2: PME# supported from D0 D1 D2 D3hot |
| [ 0.529966] pci 0000:00:13.2: pme_poll = true |
| [ 0.529968] pci 0000:00:13.2: after device_set_wakeup_capable() |
| [ 0.529973] pci 0000:00:13.2: after pci_pme_active() |
| [ 0.530277] pci 0000:00:14.0: [1002:4385] type 00 class 0x0c0500 |
| [ 0.530669] pci 0000:00:14.2: [1002:4383] type 00 class 0x040300 |
| [ 0.530704] pci 0000:00:14.2: reg 0x10: [mem 0xf0144000-0xf0147fff 64bit] |
| [ 0.530799] pci 0000:00:14.2: PME# supported from D0 D3hot D3cold |
| [ 0.530801] pci 0000:00:14.2: pme_poll = true |
| [ 0.530804] pci 0000:00:14.2: after device_set_wakeup_capable() |
| [ 0.530810] pci 0000:00:14.2: after pci_pme_active() |
| [ 0.531103] pci 0000:00:14.3: [1002:439d] type 00 class 0x060100 |
| [ 0.531492] pci 0000:00:14.4: [1002:4384] type 01 class 0x060401 |
| [ 0.531850] pci 0000:00:14.5: [1002:4399] type 00 class 0x0c0310 |
| [ 0.531875] pci 0000:00:14.5: reg 0x10: [mem 0xf014a000-0xf014afff] |
| [ 0.532255] pci 0000:00:15.0: [1002:43a0] type 01 class 0x060400 |
| [ 0.532324] pci 0000:00:15.0: enabling Extended Tags |
| [ 0.532403] pci 0000:00:15.0: supports D1 D2 |
| [ 0.532728] pci 0000:00:15.1: [1002:43a1] type 01 class 0x060400 |
| [ 0.532795] pci 0000:00:15.1: enabling Extended Tags |
| [ 0.532870] pci 0000:00:15.1: supports D1 D2 |
| [ 0.533202] pci 0000:00:18.0: [1022:1700] type 00 class 0x060000 |
| [ 0.533466] pci 0000:00:18.1: [1022:1701] type 00 class 0x060000 |
| [ 0.533708] pci 0000:00:18.2: [1022:1702] type 00 class 0x060000 |
| [ 0.533954] pci 0000:00:18.3: [1022:1703] type 00 class 0x060000 |
| [ 0.534225] pci 0000:00:18.4: [1022:1704] type 00 class 0x060000 |
| [ 0.534475] pci 0000:00:18.5: [1022:1718] type 00 class 0x060000 |
| [ 0.534718] pci 0000:00:18.6: [1022:1716] type 00 class 0x060000 |
| [ 0.534961] pci 0000:00:18.7: [1022:1719] type 00 class 0x060000 |
| [ 0.535305] pci_bus 0000:01: extended config space not accessible |
| [ 0.535404] pci 0000:00:14.4: PCI bridge to [bus 01] (subtractive decode) |
| [ 0.535418] pci 0000:00:14.4: bridge window [io 0x0000-0x0cf7 window] (subtractive decode) |
| [ 0.535422] pci 0000:00:14.4: bridge window [io 0x0d00-0xffff window] (subtractive decode) |
| [ 0.535425] pci 0000:00:14.4: bridge window [mem 0x000a0000-0x000bffff] (subtractive decode) |
| [ 0.535428] pci 0000:00:14.4: bridge window [mem 0xe0000000-0xffffffff] (subtractive decode) |
| [ 0.535506] pci 0000:00:15.0: PCI bridge to [bus 02] |
| [ 0.535621] pci 0000:03:00.0: [10ec:8168] type 00 class 0x020000 |
| [ 0.535663] pci 0000:03:00.0: reg 0x10: [io 0x1000-0x10ff] |
| [ 0.535703] pci 0000:03:00.0: reg 0x18: [mem 0xf0004000-0xf0004fff 64bit pref] |
| [ 0.535728] pci 0000:03:00.0: reg 0x20: [mem 0xf0000000-0xf0003fff 64bit pref] |
| [ 0.535879] pci 0000:03:00.0: supports D1 D2 |
| [ 0.535882] pci 0000:03:00.0: PME# supported from D0 D1 D2 D3hot D3cold |
| [ 0.535884] pci 0000:03:00.0: pme_poll = true |
| [ 0.535886] pci 0000:03:00.0: after device_set_wakeup_capable() |
| [ 0.535893] pci 0000:03:00.0: after pci_pme_active() |
| [ 0.539398] pci 0000:00:15.1: PCI bridge to [bus 03] |
| [ 0.539417] pci 0000:00:15.1: bridge window [io 0x1000-0x1fff] |
| [ 0.539435] pci 0000:00:15.1: bridge window [mem 0xf0000000-0xf00fffff 64bit pref] |
| [ 0.539480] pci_bus 0000:00: on NUMA node 0 |
| [ 0.541072] ACPI: PCI Interrupt Link [INTA] (IRQs 3 4 5 7 10 11 12 15) *0, disabled. |
| [ 0.541416] ACPI: PCI Interrupt Link [INTB] (IRQs 3 4 5 7 10 11 12 15) *0, disabled. |
| [ 0.541736] ACPI: PCI Interrupt Link [INTC] (IRQs 3 4 5 7 10 11 12 15) *0, disabled. |
| [ 0.542055] ACPI: PCI Interrupt Link [INTD] (IRQs 3 4 5 7 10 11 12 15) *0, disabled. |
| [ 0.542319] ACPI: PCI Interrupt Link [INTE] (IRQs 3 4 5 7 10 11 12 15) *0, disabled. |
| [ 0.542638] ACPI: PCI Interrupt Link [INTF] (IRQs 9) *0, disabled. |
| [ 0.542953] ACPI: PCI Interrupt Link [INTG] (IRQs 3 4 5 7 10 11 12 15) *0, disabled. |
| [ 0.543319] ACPI: PCI Interrupt Link [INTH] (IRQs 3 4 5 7 10 11 12 15) *0, disabled. |
| [ 0.544345] pci 0000:00:01.0: vgaarb: setting as boot VGA device |
| [ 0.544345] pci 0000:00:01.0: vgaarb: VGA device added: decodes=io+mem,owns=io+mem,locks=none |
| [ 0.544352] pci 0000:00:01.0: vgaarb: bridge control possible |
| [ 0.544355] vgaarb: loaded |
| [ 0.544619] SCSI subsystem initialized |
| [ 0.544619] libata version 3.00 loaded. |
| [ 0.544619] ACPI: bus type USB registered |
| [ 0.544619] usbcore: registered new interface driver usbfs |
| [ 0.544619] usbcore: registered new interface driver hub |
| [ 0.545294] usbcore: registered new device driver usb |
| [ 0.545333] PCI: Using ACPI for IRQ routing |
| [ 0.545333] PCI: pci_cache_line_size set to 64 bytes |
| [ 0.545333] e820: reserve RAM buffer [mem 0xc7d44000-0xc7ffffff] |
| [ 0.545333] e820: reserve RAM buffer [mem 0x11f000000-0x11fffffff] |
| [ 0.545564] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0 |
| [ 0.545571] hpet0: 3 comparators, 32-bit 14.318180 MHz counter |
| [ 0.548358] clocksource: Switched to clocksource tsc-early |
| [ 0.578836] VFS: Disk quotas dquot_6.6.0 |
| [ 0.578873] VFS: Dquot-cache hash table entries: 1024 (order 0, 4096 bytes) |
| [ 0.578958] *** VALIDATE hugetlbfs *** |
| [ 0.579038] pnp: PnP ACPI init |
| [ 0.579825] pnp 00:00: Plug and Play ACPI device, IDs PNP0b00 (active) |
| [ 0.579943] pnp 00:01: Plug and Play ACPI device, IDs PNP0303 PNP030b (active) |
| [ 0.580023] pnp 00:02: Plug and Play ACPI device, IDs PNP0f13 (active) |
| [ 0.580616] pnp 00:03: Plug and Play ACPI device, IDs PNP0303 PNP030b (active) |
| [ 0.580693] pnp 00:04: Plug and Play ACPI device, IDs PNP0f13 (active) |
| [ 0.580723] pnp: PnP ACPI: found 5 devices |
| [ 0.585933] pci 0000:00:14.4: PCI bridge to [bus 01] |
| [ 0.586025] pci 0000:00:15.0: PCI bridge to [bus 02] |
| [ 0.586041] pci 0000:00:15.1: PCI bridge to [bus 03] |
| [ 0.586048] pci 0000:00:15.1: bridge window [io 0x1000-0x1fff] |
| [ 0.586059] pci 0000:00:15.1: bridge window [mem 0xf0000000-0xf00fffff 64bit pref] |
| [ 0.586071] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7 window] |
| [ 0.586075] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff window] |
| [ 0.586078] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff] |
| [ 0.586082] pci_bus 0000:00: resource 7 [mem 0xe0000000-0xffffffff] |
| [ 0.586085] pci_bus 0000:01: resource 4 [io 0x0000-0x0cf7 window] |
| [ 0.586088] pci_bus 0000:01: resource 5 [io 0x0d00-0xffff window] |
| [ 0.586092] pci_bus 0000:01: resource 6 [mem 0x000a0000-0x000bffff] |
| [ 0.586095] pci_bus 0000:01: resource 7 [mem 0xe0000000-0xffffffff] |
| [ 0.586098] pci_bus 0000:03: resource 0 [io 0x1000-0x1fff] |
| [ 0.586101] pci_bus 0000:03: resource 2 [mem 0xf0000000-0xf00fffff 64bit pref] |
| [ 0.586272] NET: Registered protocol family 2 |
| [ 0.586601] tcp_listen_portaddr_hash hash table entries: 512 (order: 0, 6144 bytes) |
| [ 0.586612] TCP established hash table entries: 8192 (order: 3, 32768 bytes) |
| [ 0.586640] TCP bind hash table entries: 8192 (order: 4, 65536 bytes) |
| [ 0.586677] TCP: Hash tables configured (established 8192 bind 8192) |
| [ 0.586737] UDP hash table entries: 512 (order: 2, 16384 bytes) |
| [ 0.586750] UDP-Lite hash table entries: 512 (order: 2, 16384 bytes) |
| [ 0.586850] NET: Registered protocol family 1 |
| [ 0.586889] pci 0000:00:01.0: Video device with shadowed ROM at [mem 0x000c0000-0x000dffff] |
| [ 0.590021] PCI: CLS 64 bytes, default 64 |
| [ 0.590148] PCI-DMA: Using software bounce buffering for IO (SWIOTLB) |
| [ 0.590151] software IO TLB: mapped [mem 0x2f9fd000-0x339fd000] (64MB) |
| [ 0.590348] LVT offset 0 assigned for vector 0x400 |
| [ 0.590407] perf: AMD IBS detected (0x000000ff) |
| [ 0.592146] Initialise system trusted keyrings |
| [ 0.592265] workingset: timestamp_bits=14 max_order=20 bucket_order=6 |
| [ 0.595596] zbud: loaded |
| [ 0.596439] NET: Registered protocol family 38 |
| [ 0.596452] Key type asymmetric registered |
| [ 0.596456] Asymmetric key parser 'x509' registered |
| [ 0.596482] bounce: pool size: 64 pages |
| [ 0.596500] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 251) |
| [ 0.596623] io scheduler mq-deadline registered |
| [ 0.596628] io scheduler kyber registered |
| [ 0.597475] pcieport 0000:00:15.0: PME: Signaling with IRQ 24 |
| [ 0.598149] pcieport 0000:00:15.1: PME: Signaling with IRQ 25 |
| [ 0.598483] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input0 |
| [ 0.598524] ACPI: Power Button [PWRF] |
| [ 0.600637] thermal LNXTHERM:00: registered as thermal_zone0 |
| [ 0.600639] ACPI: Thermal Zone [TZ00] (50 C) |
| [ 0.601106] initcall serial8250_init blacklisted |
| [ 0.602082] Non-volatile memory driver v1.3 |
| [ 0.602216] Linux agpgart interface v0.103 |
| [ 0.602901] [drm] radeon kernel modesetting enabled. |
| [ 0.602935] radeon 0000:00:01.0: remove_conflicting_pci_framebuffers: bar 0: 0xe0000000 -> 0xefffffff |
| [ 0.602939] radeon 0000:00:01.0: remove_conflicting_pci_framebuffers: bar 2: 0xf0100000 -> 0xf013ffff |
| [ 0.602943] radeon 0000:00:01.0: vgaarb: deactivate vga console |
| [ 0.603744] Console: switching to colour dummy device 80x25 |
| [ 0.604657] [drm] initializing kernel modesetting (PALM 0x1002:0x9802 0x1002:0x9802 0x00). |
| [ 0.604735] ATOM BIOS: AMD |
| [ 0.604809] radeon 0000:00:01.0: VRAM: 384M 0x0000000000000000 - 0x0000000017FFFFFF (384M used) |
| [ 0.604813] radeon 0000:00:01.0: GTT: 1024M 0x0000000018000000 - 0x0000000057FFFFFF |
| [ 0.604821] [drm] Detected VRAM RAM=384M, BAR=256M |
| [ 0.604823] [drm] RAM width 32bits DDR |
| [ 0.605067] [TTM] Zone kernel: Available graphics memory: 385558 KiB |
| [ 0.605070] [TTM] Zone highmem: Available graphics memory: 1822882 KiB |
| [ 0.605071] [TTM] Initializing pool allocator |
| [ 0.605080] [TTM] Initializing DMA pool allocator |
| [ 0.605117] [drm] radeon: 384M of VRAM memory ready |
| [ 0.605120] [drm] radeon: 1024M of GTT memory ready. |
| [ 0.605134] [drm] Loading PALM Microcode |
| [ 0.605142] [drm] Internal thermal controller without fan control |
| [ 0.605238] [drm] Found smc ucode version: 0x00010601 |
| [ 0.605307] [drm] radeon: dpm initialized |
| [ 0.605341] [drm] GART: num cpu pages 262144, num gpu pages 262144 |
| [ 0.612664] [drm] GART: Restore entries: num cpu pages 262144, num gpu pages 262144 |
| [ 0.617773] [drm] GART: Done restoring entries |
| [ 0.617781] [drm] PCIE GART of 1024M enabled (table at 0x0000000000162000). |
| [ 0.617977] radeon 0000:00:01.0: WB enabled |
| [ 0.617985] radeon 0000:00:01.0: fence driver on ring 0 use gpu addr 0x0000000018000c00 and cpu addr 0x(ptrval) |
| [ 0.617989] radeon 0000:00:01.0: fence driver on ring 3 use gpu addr 0x0000000018000c0c and cpu addr 0x(ptrval) |
| [ 0.618872] radeon 0000:00:01.0: fence driver on ring 5 use gpu addr 0x0000000000072118 and cpu addr 0x(ptrval) |
| [ 0.618875] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013). |
| [ 0.618876] [drm] Driver supports precise vblank timestamp query. |
| [ 0.618879] radeon 0000:00:01.0: radeon: MSI limited to 32-bit |
| [ 0.619026] radeon 0000:00:01.0: radeon: using MSI. |
| [ 0.619066] [drm] radeon: irq initialized. |
| [ 0.635680] [drm] ring test on 0 succeeded in 1 usecs |
| [ 0.635689] [drm] ring test on 3 succeeded in 3 usecs |
| [ 0.649748] [drm] ring test on 5 succeeded in 1 usecs |
| [ 0.651767] [drm] UVD initialized successfully. |
| [ 0.652031] [drm] ib test on ring 0 succeeded in 0 usecs |
| [ 0.652086] [drm] ib test on ring 3 succeeded in 0 usecs |
| [ 0.664280] [drm] ib test on ring 5 succeeded |
| [ 0.666952] [drm] Radeon Display Connectors |
| [ 0.666954] [drm] Connector 0: |
| [ 0.666955] [drm] HDMI-A-1 |
| [ 0.666957] [drm] HPD1 |
| [ 0.666960] [drm] DDC: 0x6430 0x6430 0x6434 0x6434 0x6438 0x6438 0x643c 0x643c |
| [ 0.666961] [drm] Encoders: |
| [ 0.666963] [drm] DFP1: INTERNAL_UNIPHY |
| [ 0.666965] [drm] Connector 1: |
| [ 0.666966] [drm] HDMI-A-2 |
| [ 0.666967] [drm] HPD2 |
| [ 0.666969] [drm] DDC: 0x6440 0x6440 0x6444 0x6444 0x6448 0x6448 0x644c 0x644c |
| [ 0.666970] [drm] Encoders: |
| [ 0.666971] [drm] DFP2: INTERNAL_UNIPHY |
| [ 0.666972] [drm] Connector 2: |
| [ 0.666973] [drm] VGA-1 |
| [ 0.666976] [drm] DDC: 0x64d8 0x64d8 0x64dc 0x64dc 0x64e0 0x64e0 0x64e4 0x64e4 |
| [ 0.666977] [drm] Encoders: |
| [ 0.666978] [drm] CRT1: INTERNAL_KLDSCP_DAC1 |
| [ 0.708112] [drm] fb mappable at 0xE0366000 |
| [ 0.708114] [drm] vram apper at 0xE0000000 |
| [ 0.708115] [drm] size 5242880 |
| [ 0.708117] [drm] fb depth is 24 |
| [ 0.708118] [drm] pitch is 5120 |
| [ 0.708424] fbcon: radeondrmfb (fb0) is primary device |
| [ 0.729004] Console: switching to colour frame buffer device 160x64 |
| [ 0.739813] radeon 0000:00:01.0: fb0: radeondrmfb frame buffer device |
| [ 0.740006] [drm] Initialized radeon 2.50.0 20080528 for 0000:00:01.0 on minor 0 |
| [ 0.740708] ahci 0000:00:11.0: version 3.0 |
| [ 0.741456] ahci 0000:00:11.0: AHCI 0001.0200 32 slots 6 ports 6 Gbps 0x3f impl SATA mode |
| [ 0.741462] ahci 0000:00:11.0: flags: 64bit ncq sntf ilck led clo pmp pio slum part |
| [ 0.743894] scsi host0: ahci |
| [ 0.744523] scsi host1: ahci |
| [ 0.745061] scsi host2: ahci |
| [ 0.745591] scsi host3: ahci |
| [ 0.746066] scsi host4: ahci |
| [ 0.746554] scsi host5: ahci |
| [ 0.746870] ata1: SATA max UDMA/133 abar m1024@0xf014b000 port 0xf014b100 irq 19 |
| [ 0.746874] ata2: SATA max UDMA/133 abar m1024@0xf014b000 port 0xf014b180 irq 19 |
| [ 0.746877] ata3: SATA max UDMA/133 abar m1024@0xf014b000 port 0xf014b200 irq 19 |
| [ 0.746881] ata4: SATA max UDMA/133 abar m1024@0xf014b000 port 0xf014b280 irq 19 |
| [ 0.746884] ata5: SATA max UDMA/133 abar m1024@0xf014b000 port 0xf014b300 irq 19 |
| [ 0.746888] ata6: SATA max UDMA/133 abar m1024@0xf014b000 port 0xf014b380 irq 19 |
| [ 0.747131] libphy: Fixed MDIO Bus: probed |
| [ 0.747229] usbcore: registered new interface driver usbserial_generic |
| [ 0.747241] usbserial: USB Serial support registered for generic |
| [ 0.747334] i8042: PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at 0x60,0x64 irq 1,12 |
| [ 0.749780] ata2: SATA link down (SStatus 0 SControl 0) |
| [ 0.749909] ata3: SATA link down (SStatus 0 SControl 0) |
| [ 0.750053] ata4: SATA link down (SStatus 0 SControl 0) |
| [ 0.750212] ata5: SATA link down (SStatus 0 SControl 0) |
| [ 0.750662] ata6: SATA link down (SStatus 0 SControl 0) |
| [ 0.751113] serio: i8042 KBD port at 0x60,0x64 irq 1 |
| [ 0.751126] serio: i8042 AUX port at 0x60,0x64 irq 12 |
| [ 0.751563] mousedev: PS/2 mouse device common for all mice |
| [ 0.752294] rtc_cmos 00:00: RTC can wake from S4 |
| [ 0.752692] rtc_cmos 00:00: registered as rtc0 |
| [ 0.752737] rtc_cmos 00:00: alarms up to one day, 114 bytes nvram, hpet irqs |
| [ 0.752883] w83627ehf: Found NCT6775F chip at 0x290 |
| [ 0.752894] ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 0) |
| [ 0.753240] ata1.00: ATA-9: SanDisk SDSSDP064G, 2.0.0, max UDMA/133 |
| [ 0.753244] ata1.00: 125045424 sectors, multi 1: LBA48 NCQ (depth 32) |
| [ 0.753446] w83627ehf w83627ehf.656: hwmon_device_register() is deprecated. Please convert the driver to use hwmon_device_register_with_info(). |
| [ 0.753576] device-mapper: uevent: version 1.0.3 |
| [ 0.753734] ata1.00: configured for UDMA/133 |
| [ 0.753767] device-mapper: ioctl: 4.40.0-ioctl (2019-01-18) initialised: dm-devel@redhat.com |
| [ 0.753952] hidraw: raw HID events driver (C) Jiri Kosina |
| [ 0.754058] usbcore: registered new interface driver usbhid |
| [ 0.754059] usbhid: USB HID core driver |
| [ 0.754278] scsi 0:0:0:0: Direct-Access ATA SanDisk SDSSDP06 0 PQ: 0 ANSI: 5 |
| [ 0.754420] Initializing XFRM netlink socket |
| [ 0.754793] NET: Registered protocol family 10 |
| [ 0.754926] sd 0:0:0:0: Attached scsi generic sg0 type 0 |
| [ 0.755350] sd 0:0:0:0: [sda] 125045424 512-byte logical blocks: (64.0 GB/59.6 GiB) |
| [ 0.755382] sd 0:0:0:0: [sda] Write Protect is off |
| [ 0.755386] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 |
| [ 0.755437] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA |
| [ 0.755452] Segment Routing with IPv6 |
| [ 0.755496] mip6: Mobile IPv6 |
| [ 0.755503] NET: Registered protocol family 17 |
| [ 0.756060] mce: Using 6 MCE banks |
| [ 0.756121] Using IPI No-Shortcut mode |
| [ 0.756147] sched_clock: Marking stable (752534291, 3327119)->(859925971, -104064561) |
| [ 0.756766] sda: sda1 |
| [ 0.757469] registered taskstats version 1 |
| [ 0.757477] Loading compiled-in X.509 certificates |
| [ 0.757540] zswap: loaded using pool lzo/zbud |
| [ 0.757782] sd 0:0:0:0: [sda] Attached SCSI disk |
| [ 0.758251] PM: Magic number: 7:779:249 |
| [ 0.758524] rtc_cmos 00:00: setting system clock to 2019-06-17T22:13:51 UTC (1560809631) |
| [ 0.780135] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input1 |
| [ 0.845556] EXT4-fs (sda1): mounted filesystem with ordered data mode. Opts: (null) |
| [ 0.845600] VFS: Mounted root (ext4 filesystem) on device 8:1. |
| [ 0.846972] random: 1 |
| [ 0.846977] random: 2 |
| [ 0.846980] random: 3 |
| [ 0.846982] random: 4 |
| [ 0.846986] random: fast init done |
| [ 0.847978] devtmpfs: mounted |
| [ 0.848014] After kernel_init_freeable |
| [ 0.850114] Freeing unused kernel image memory: 1144K |
| [ 0.850305] Write protecting kernel text and read-only data: 11908k |
| [ 0.850307] NX-protecting the kernel data: 5368k |
| [ 0.850977] x86/mm: Checked W+X mappings: passed, no W+X pages found. |
| [ 0.850978] After mark_readonly |
| [ 0.850985] After pti_finalize |
| [ 0.850986] rcu_end_inkernel_boot |
| [ 0.850988] Run /sbin/init as init process |
| [ 1.200849] systemd[1]: systemd 242 running in system mode. (+PAM +AUDIT +SELINUX +IMA +APPARMOR +SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ +LZ4 +SECCOMP +BLKID +ELFUTILS +KMOD +IDN2 -IDN +PCRE2 default-hierarchy=unified) |
| [ 1.213025] systemd[1]: Detected architecture x86. |
| [ 1.213726] systemd[1]: Set hostname to <kodi>. |
| [ 1.217027] systemd[1]: Failed to bump fs.file-max, ignoring: Invalid argument |
| [ 1.626396] tsc: Refined TSC clocksource calibration: 1599.999 MHz |
| [ 1.626413] clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x171023f09ff, max_idle_ns: 440795233615 ns |
| [ 1.626445] clocksource: Switched to clocksource tsc |
| [ 1.705729] systemd[1]: /lib/systemd/system/dbus.socket:4: ListenStream= references a path below legacy directory /var/run/, updating /var/run/dbus/system_bus_socket → /run/dbus/system_bus_socket; please update the unit file accordingly. |
| [ 1.712569] random: systemd: uninitialized urandom read (16 bytes read) |
| [ 1.712936] systemd[1]: Listening on udev Control Socket. |
| [ 1.713226] random: systemd: uninitialized urandom read (16 bytes read) |
| [ 1.713389] systemd[1]: Started Dispatch Password Requests to Console Directory Watch. |
| [ 1.713426] random: systemd: uninitialized urandom read (16 bytes read) |
| [ 1.713448] systemd[1]: Reached target Swap. |
| [ 1.713893] systemd[1]: Listening on Journal Audit Socket. |
| [ 1.714193] systemd[1]: Listening on Journal Socket. |
| [ 2.470323] acpi_cpufreq: overriding BIOS provided _PSD data |
| [ 3.028332] 1 |
| [ 3.028371] 2 |
| [ 3.028713] 3 |
| [ 3.028714] 4 |
| [ 3.028715] 5 |
| [ 3.028716] 7 |
| [ 3.028739] 8 |
| [ 3.028740] 9 |
| [ 3.034856] 1 |
| [ 3.034888] 2 |
| [ 3.035461] 3 |
| [ 3.035463] 4 |
| [ 3.035463] 5 |
| [ 3.035464] 7 |
| [ 3.035470] 8 |
| [ 3.035471] 9 |
| [ 3.086788] snd_hda_codec_realtek hdaudioC1D0: ALC892: SKU not ready 0x00000100 |
| [ 3.086969] input: HD-Audio Generic HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:01.1/sound/card0/input4 |
| [ 3.087728] snd_hda_codec_realtek hdaudioC1D0: autoconfig for ALC892: line_outs=4 (0x14/0x16/0x15/0x17/0x0) type:line |
| [ 3.087733] snd_hda_codec_realtek hdaudioC1D0: speaker_outs=0 (0x0/0x0/0x0/0x0/0x0) |
| [ 3.087736] snd_hda_codec_realtek hdaudioC1D0: hp_outs=1 (0x1b/0x0/0x0/0x0/0x0) |
| [ 3.087739] snd_hda_codec_realtek hdaudioC1D0: mono: mono_out=0x0 |
| [ 3.087742] snd_hda_codec_realtek hdaudioC1D0: dig-out=0x1e/0x0 |
| [ 3.087744] snd_hda_codec_realtek hdaudioC1D0: inputs: |
| [ 3.087748] snd_hda_codec_realtek hdaudioC1D0: Rear Mic=0x18 |
| [ 3.087751] snd_hda_codec_realtek hdaudioC1D0: Front Mic=0x19 |
| [ 3.087754] snd_hda_codec_realtek hdaudioC1D0: Line=0x1a |
| [ 3.087756] snd_hda_codec_realtek hdaudioC1D0: CD=0x1c |
| [ 3.159344] input: HDA ATI SB Rear Mic as /devices/pci0000:00/0000:00:14.2/sound/card1/input5 |
| [ 3.159484] input: HDA ATI SB Front Mic as /devices/pci0000:00/0000:00:14.2/sound/card1/input6 |
| [ 3.159608] input: HDA ATI SB Line as /devices/pci0000:00/0000:00:14.2/sound/card1/input7 |
| [ 3.159738] input: HDA ATI SB Line Out Front as /devices/pci0000:00/0000:00:14.2/sound/card1/input8 |
| [ 3.159863] input: HDA ATI SB Line Out Surround as /devices/pci0000:00/0000:00:14.2/sound/card1/input9 |
| [ 3.159989] input: HDA ATI SB Line Out CLFE as /devices/pci0000:00/0000:00:14.2/sound/card1/input10 |
| [ 3.160109] input: HDA ATI SB Line Out Side as /devices/pci0000:00/0000:00:14.2/sound/card1/input11 |
| [ 3.160227] input: HDA ATI SB Front Headphone as /devices/pci0000:00/0000:00:14.2/sound/card1/input12 |
| [ 3.373397] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver |
| [ 3.376131] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver |
| [ 3.379770] ehci-pci: EHCI PCI platform driver |
| [ 3.380463] QUIRK: Enable AMD PLL fix |
| [ 3.380508] ehci-pci 0000:00:12.2: EHCI Host Controller |
| [ 3.380524] ehci-pci 0000:00:12.2: new USB bus registered, assigned bus number 1 |
| [ 3.380537] ehci-pci 0000:00:12.2: applying AMD SB700/SB800/Hudson-2/3 EHCI dummy qh workaround |
| [ 3.380621] ehci-pci 0000:00:12.2: debug port 1 |
| [ 3.380705] ehci-pci 0000:00:12.2: irq 17, io mem 0xf014c000 |
| [ 3.387383] ehci-pci 0000:00:12.2: USB 2.0 started, EHCI 1.00 |
| [ 3.387569] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 5.02 |
| [ 3.387573] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 |
| [ 3.387577] usb usb1: Product: EHCI Host Controller |
| [ 3.387580] usb usb1: Manufacturer: Linux 5.2.0-rc5-00045-g0618879ba012 ehci_hcd |
| [ 3.387583] usb usb1: SerialNumber: 0000:00:12.2 |
| [ 3.387874] hub 1-0:1.0: USB hub found |
| [ 3.387897] hub 1-0:1.0: 5 ports detected |
| [ 3.392331] ehci-pci 0000:00:13.2: EHCI Host Controller |
| [ 3.392351] ehci-pci 0000:00:13.2: new USB bus registered, assigned bus number 2 |
| [ 3.392365] ehci-pci 0000:00:13.2: applying AMD SB700/SB800/Hudson-2/3 EHCI dummy qh workaround |
| [ 3.392450] ehci-pci 0000:00:13.2: debug port 1 |
| [ 3.392514] ehci-pci 0000:00:13.2: irq 17, io mem 0xf014d000 |
| [ 3.399397] ehci-pci 0000:00:13.2: USB 2.0 started, EHCI 1.00 |
| [ 3.399567] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 5.02 |
| [ 3.399570] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1 |
| [ 3.399574] usb usb2: Product: EHCI Host Controller |
| [ 3.399577] usb usb2: Manufacturer: Linux 5.2.0-rc5-00045-g0618879ba012 ehci_hcd |
| [ 3.399580] usb usb2: SerialNumber: 0000:00:13.2 |
| [ 3.399887] hub 2-0:1.0: USB hub found |
| [ 3.399910] hub 2-0:1.0: 5 ports detected |
| [ 3.405550] ohci-pci: OHCI PCI platform driver |
| [ 3.406055] ohci-pci 0000:00:12.0: OHCI PCI host controller |
| [ 3.406071] ohci-pci 0000:00:12.0: new USB bus registered, assigned bus number 3 |
| [ 3.406160] ohci-pci 0000:00:12.0: irq 18, io mem 0xf0148000 |
| [ 3.407695] ohci-pci 0000:00:13.0: OHCI PCI host controller |
| [ 3.407709] ohci-pci 0000:00:13.0: new USB bus registered, assigned bus number 4 |
| [ 3.407760] ohci-pci 0000:00:13.0: irq 18, io mem 0xf0149000 |
| [ 3.408006] ohci-pci 0000:00:14.5: OHCI PCI host controller |
| [ 3.408017] ohci-pci 0000:00:14.5: new USB bus registered, assigned bus number 5 |
| [ 3.408048] ohci-pci 0000:00:14.5: irq 18, io mem 0xf014a000 |
| [ 3.449998] piix4_smbus 0000:00:14.0: SMBus Host Controller at 0xb00, revision 0 |
| [ 3.450012] piix4_smbus 0000:00:14.0: Using register 0x2c for SMBus port selection |
| [ 3.450247] piix4_smbus 0000:00:14.0: Auxiliary SMBus Host Controller at 0x8060 |
| [ 3.462422] usb usb3: New USB device found, idVendor=1d6b, idProduct=0001, bcdDevice= 5.02 |
| [ 3.462428] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1 |
| [ 3.462432] usb usb3: Product: OHCI PCI host controller |
| [ 3.462435] usb usb3: Manufacturer: Linux 5.2.0-rc5-00045-g0618879ba012 ohci_hcd |
| [ 3.462438] usb usb3: SerialNumber: 0000:00:12.0 |
| [ 3.467834] hub 3-0:1.0: USB hub found |
| [ 3.467915] hub 3-0:1.0: 5 ports detected |
| [ 3.468394] usb usb5: New USB device found, idVendor=1d6b, idProduct=0001, bcdDevice= 5.02 |
| [ 3.468400] usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1 |
| [ 3.468404] usb usb5: Product: OHCI PCI host controller |
| [ 3.468407] usb usb5: Manufacturer: Linux 5.2.0-rc5-00045-g0618879ba012 ohci_hcd |
| [ 3.468410] usb usb5: SerialNumber: 0000:00:14.5 |
| [ 3.468734] hub 5-0:1.0: USB hub found |
| [ 3.468811] hub 5-0:1.0: 2 ports detected |
| [ 3.469155] usb usb4: New USB device found, idVendor=1d6b, idProduct=0001, bcdDevice= 5.02 |
| [ 3.469158] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1 |
| [ 3.469161] usb usb4: Product: OHCI PCI host controller |
| [ 3.469164] usb usb4: Manufacturer: Linux 5.2.0-rc5-00045-g0618879ba012 ohci_hcd |
| [ 3.469167] usb usb4: SerialNumber: 0000:00:13.0 |
| [ 3.469399] hub 4-0:1.0: USB hub found |
| [ 3.469456] hub 4-0:1.0: 5 ports detected |
| [ 3.588806] libphy: r8169: probed |
| [ 3.590242] random: crng init done |
| [ 3.590247] random: 7 urandom warning(s) missed due to ratelimiting |
| [ 3.591732] r8169 0000:03:00.0 eth0: RTL8168e/8111e, bc:5f:f4:c8:d3:98, XID 2c2, IRQ 28 |
| [ 3.591739] r8169 0000:03:00.0 eth0: jumbo features [frames: 9200 bytes, tx checksumming: ko] |
| [ 3.860344] usb 3-2: new low-speed USB device number 2 using ohci-pci |
| [ 4.027502] usb 3-2: New USB device found, idVendor=1241, idProduct=1122, bcdDevice= 1.00 |
| [ 4.027508] usb 3-2: New USB device strings: Mfr=0, Product=0, SerialNumber=0 |
| [ 4.037226] input: HID 1241:1122 as /devices/pci0000:00/0000:00:12.0/usb3/3-2/3-2:1.0/0003:1241:1122.0001/input/input13 |
| [ 4.037558] hid-generic 0003:1241:1122.0001: input,hidraw0: USB HID v1.00 Mouse [HID 1241:1122] on usb-0000:00:12.0-2/input0 |
| [ 4.961883] r8169 0000:03:00.0 enp3s0: renamed from eth0 |
| [ 5.160408] RTL8211DN Gigabit Ethernet r8169-300:00: attached PHY driver [RTL8211DN Gigabit Ethernet] (mii_bus:phy_addr=r8169-300:00, irq=IGNORE) |
| [ 5.373785] r8169 0000:03:00.0 enp3s0: Link is Down |
| [ 17.447112] r8169 0000:03:00.0 enp3s0: Link is Up - 100Mbps/Full - flow control rx/tx |
| [ 17.447146] IPv6: ADDRCONF(NETDEV_CHANGE): enp3s0: link becomes ready |