| [ 0.000000] Linux version 5.2.0-rc4-00053-gaca4081d71cb (root@ee888abba79b) (gcc version 8.3.0 (Debian 8.3.0-7)) #47 SMP Mon Jun 10 19:32:21 UTC 2019 |
| [ 0.000000] x86/fpu: x87 FPU will use FXSAVE |
| [ 0.000000] BIOS-provided physical RAM map: |
| [ 0.000000] BIOS-e820: [mem 0x0000000000000000-0x0000000000000fff] type 16 |
| [ 0.000000] BIOS-e820: [mem 0x0000000000001000-0x000000000009ffff] usable |
| [ 0.000000] BIOS-e820: [mem 0x00000000000c0000-0x00000000000fffff] reserved |
| [ 0.000000] BIOS-e820: [mem 0x0000000000100000-0x00000000c7d43fff] usable |
| [ 0.000000] BIOS-e820: [mem 0x00000000c7d44000-0x00000000c7ffffff] type 16 |
| [ 0.000000] BIOS-e820: [mem 0x00000000c8000000-0x00000000dfffffff] reserved |
| [ 0.000000] BIOS-e820: [mem 0x00000000f8000000-0x00000000fbffffff] reserved |
| [ 0.000000] BIOS-e820: [mem 0x0000000100000000-0x000000011effffff] usable |
| [ 0.000000] kmemleak: Kernel memory leak detector disabled |
| [ 0.000000] NX (Execute Disable) protection: active |
| [ 0.000000] SMBIOS 2.7 present. |
| [ 0.000000] DMI: ASROCK E350M1/E350M1, BIOS 4.9-1995-gdeb99af8a1 06/11/2019 |
| [ 0.000000] tsc: Fast TSC calibration using PIT |
| [ 0.000000] tsc: Detected 1600.094 MHz processor |
| [ 0.005998] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved |
| [ 0.006004] e820: remove [mem 0x000a0000-0x000fffff] usable |
| [ 0.006014] last_pfn = 0x11f000 max_arch_pfn = 0x1000000 |
| [ 0.006025] MTRR default type: uncachable |
| [ 0.006027] MTRR fixed ranges enabled: |
| [ 0.006030] 00000-9FFFF write-back |
| [ 0.006033] A0000-BFFFF uncachable |
| [ 0.006036] C0000-FFFFF write-back |
| [ 0.006038] MTRR variable ranges enabled: |
| [ 0.006041] 0 base 0FFC00000 mask FFFC00000 write-protect |
| [ 0.006045] 1 base 0C0000000 mask FF8000000 write-back |
| [ 0.006047] 2 base 080000000 mask FC0000000 write-back |
| [ 0.006050] 3 base 000000000 mask F80000000 write-back |
| [ 0.006052] 4 disabled |
| [ 0.006053] 5 disabled |
| [ 0.006055] 6 disabled |
| [ 0.006056] 7 disabled |
| [ 0.006059] TOM2: 000000011f000000 aka 4592M |
| [ 0.006253] x86/PAT: Configuration [0-7]: WB WC UC- UC WB WP UC- WT |
| [ 0.006344] initial memory mapped: [mem 0x00000000-0x0d3fffff] |
| [ 0.006502] BRK [0x0cea1000, 0x0cea1fff] PGTABLE |
| [ 0.006524] BRK [0x0cea2000, 0x0cea2fff] PGTABLE |
| [ 0.006536] ACPI: Early table checksum verification disabled |
| [ 0.006666] ACPI: RSDP 0x00000000000F0800 000024 (v02 COREv4) |
| [ 0.006673] ACPI: XSDT 0x00000000C7D450E0 000064 (v01 COREv4 COREBOOT 00000000 CORE 20190509) |
| [ 0.006686] ACPI: FACP 0x00000000C7D477D0 0000F4 (v04 COREv4 COREBOOT 00000000 CORE 20190509) |
| [ 0.006700] ACPI: DSDT 0x00000000C7D45280 002549 (v02 COREv4 COREBOOT 00010001 INTL 20190509) |
| [ 0.006707] ACPI: FACS 0x00000000C7D45240 000040 |
| [ 0.006712] ACPI: FACS 0x00000000C7D45240 000040 |
| [ 0.006717] ACPI: SSDT 0x00000000C7D478D0 00008A (v02 COREv4 COREBOOT 0000002A CORE 20190509) |
| [ 0.006724] ACPI: APIC 0x00000000C7D47960 00005C (v02 COREv4 COREBOOT 00000000 CORE 20190509) |
| [ 0.006730] ACPI: HEST 0x00000000C7D479C0 000028 (v01 COREv4 COREBOOT 00000000 CORE 20190509) |
| [ 0.006736] ACPI: SSDT 0x00000000C7D479F0 00168E (v02 AMD ALIB 00000001 MSFT 04000000) |
| [ 0.006743] ACPI: SSDT 0x00000000C7D49080 0003DE (v01 AMD POWERNOW 00000001 AMD 00000001) |
| [ 0.006750] ACPI: VFCT 0x00000000C7D49460 00E269 (v01 COREv4 COREBOOT 00000000 CORE 20190509) |
| [ 0.006757] ACPI: HPET 0x00000000C7D576D0 000038 (v01 COREv4 COREBOOT 00000000 CORE 20190509) |
| [ 0.006775] ACPI: Local APIC address 0xfee00000 |
| [ 0.006783] 3706MB HIGHMEM available. |
| [ 0.006787] 885MB LOWMEM available. |
| [ 0.006789] mapped low ram: 0 - 375fe000 |
| [ 0.006790] low ram: 0 - 375fe000 |
| [ 0.006802] BRK [0x0cea3000, 0x0cea3fff] PGTABLE |
| [ 0.017470] Zone ranges: |
| [ 0.017475] DMA [mem 0x0000000000001000-0x0000000000ffffff] |
| [ 0.017480] Normal [mem 0x0000000001000000-0x00000000375fdfff] |
| [ 0.017482] HighMem [mem 0x00000000375fe000-0x000000011effffff] |
| [ 0.017485] Movable zone start for each node |
| [ 0.017486] Early memory node ranges |
| [ 0.017488] node 0: [mem 0x0000000000001000-0x000000000009ffff] |
| [ 0.017490] node 0: [mem 0x0000000000100000-0x00000000c7d43fff] |
| [ 0.017493] node 0: [mem 0x0000000100000000-0x000000011effffff] |
| [ 0.021641] Zeroed struct page in unavailable ranges: 99101 pages |
| [ 0.021646] Initmem setup node 0 [mem 0x0000000000001000-0x000000011effffff] |
| [ 0.021651] On node 0 totalpages: 945379 |
| [ 0.021654] DMA zone: 40 pages used for memmap |
| [ 0.021656] DMA zone: 0 pages reserved |
| [ 0.021658] DMA zone: 3999 pages, LIFO batch:0 |
| [ 0.021854] Normal zone: 2175 pages used for memmap |
| [ 0.021856] Normal zone: 222718 pages, LIFO batch:63 |
| [ 0.032289] HighMem zone: 718662 pages, LIFO batch:63 |
| [ 0.071475] Using APIC driver default |
| [ 0.071754] ACPI: Local APIC address 0xfee00000 |
| [ 0.071777] IOAPIC[0]: apic_id 2, version 33, address 0xfec00000, GSI 0-23 |
| [ 0.071783] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) |
| [ 0.071787] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 low level) |
| [ 0.071790] ACPI: IRQ0 used by override. |
| [ 0.071792] ACPI: IRQ9 used by override. |
| [ 0.071797] Using ACPI (MADT) for SMP configuration information |
| [ 0.071800] ACPI: HPET id: 0x43538210 base: 0xfed00000 |
| [ 0.071811] smpboot: Allowing 2 CPUs, 0 hotplug CPUs |
| [ 0.071837] [mem 0xe0000000-0xf7ffffff] available for PCI devices |
| [ 0.071845] clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 1910969940391419 ns |
| [ 0.071850] After setup_arch |
| [ 0.071851] After mm_init_cpumask |
| [ 0.071860] After setup_command_line |
| [ 0.071861] After setup_nr_cpu_ids |
| [ 0.071864] setup_percpu: NR_CPUS:2 nr_cpumask_bits:2 nr_cpu_ids:2 nr_node_ids:1 |
| [ 0.072127] percpu: Embedded 33 pages/cpu s102668 r0 d32500 u135168 |
| [ 0.072141] pcpu-alloc: s102668 r0 d32500 u135168 alloc=33*4096 |
| [ 0.072143] pcpu-alloc: [0] 0 [0] 1 |
| [ 0.072169] After setup_per_cpu_areas |
| [ 0.072171] After smp_perpare_boot_cpu |
| [ 0.072172] After boot_cpu_hotplug_init |
| [ 0.072177] Built 1 zonelists, mobility grouping on. Total pages: 943164 |
| [ 0.072182] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-5.2.0-rc4-00053-gaca4081d71cb root=/dev/sda1 rw noisapnp cryptomgr.notests quiet iomem=relaxed apparmor=0 selinux=0 kmemleak=off initcall_blacklist=serial8250_init udev.children_max=2 udev.log_priority=info |
| [ 0.072449] blacklisting initcall serial8250_init |
| [ 0.072798] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes) |
| [ 0.072970] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes) |
| [ 0.072982] Initializing CPU#0 |
| [ 0.107702] Initializing HighMem for node 0 (000375fe:0011f000) |
| [ 0.107706] add_highpages_with_active_regions: start_pfn = 226814, end_pfn = 1175552 |
| [ 0.107710] add_highpages_with_active_regions: for_each_free_mem_range: i = 8589934592, nid = 0, pfn = 226814, e_pfn = 226814, before for loop |
| [ 0.107714] add_highpages_with_active_regions: for_each_free_mem_range: i = 12884901889, nid = 0, pfn = 226814, e_pfn = 226814, before for loop |
| [ 0.107716] add_highpages_with_active_regions: for_each_free_mem_range: i = 17179869185, nid = 0, pfn = 226814, e_pfn = 226814, before for loop |
| [ 0.107719] add_highpages_with_active_regions: for_each_free_mem_range: i = 21474836481, nid = 0, pfn = 226814, e_pfn = 226814, before for loop |
| [ 0.107721] add_highpages_with_active_regions: for_each_free_mem_range: i = 25769803777, nid = 0, pfn = 226814, e_pfn = 226814, before for loop |
| [ 0.107724] add_highpages_with_active_regions: for_each_free_mem_range: i = 30064771073, nid = 0, pfn = 226814, e_pfn = 226814, before for loop |
| [ 0.107726] add_highpages_with_active_regions: for_each_free_mem_range: i = 34359738369, nid = 0, pfn = 226814, e_pfn = 226814, before for loop |
| [ 0.107729] add_highpages_with_active_regions: for_each_free_mem_range: i = 38654705665, nid = 0, pfn = 226814, e_pfn = 226814, before for loop |
| [ 0.107731] add_highpages_with_active_regions: for_each_free_mem_range: i = 42949672961, nid = 0, pfn = 226814, e_pfn = 226814, before for loop |
| [ 0.107733] add_highpages_with_active_regions: for_each_free_mem_range: i = 47244640257, nid = 0, pfn = 226814, e_pfn = 226814, before for loop |
| [ 0.107736] add_highpages_with_active_regions: for_each_free_mem_range: i = 51539607553, nid = 0, pfn = 226814, e_pfn = 226814, before for loop |
| [ 0.107738] add_highpages_with_active_regions: for_each_free_mem_range: i = 55834574849, nid = 0, pfn = 226814, e_pfn = 226814, before for loop |
| [ 0.107740] add_highpages_with_active_regions: for_each_free_mem_range: i = 60129542145, nid = 0, pfn = 226814, e_pfn = 226814, before for loop |
| [ 0.107743] add_highpages_with_active_regions: for_each_free_mem_range: i = 64424509441, nid = 0, pfn = 226814, e_pfn = 226814, before for loop |
| [ 0.107745] add_highpages_with_active_regions: for_each_free_mem_range: i = 68719476737, nid = 0, pfn = 226814, e_pfn = 226814, before for loop |
| [ 0.107748] add_highpages_with_active_regions: for_each_free_mem_range: i = 73014444033, nid = 0, pfn = 226814, e_pfn = 226814, before for loop |
| [ 0.107750] add_highpages_with_active_regions: for_each_free_mem_range: i = 77309411329, nid = 0, pfn = 226814, e_pfn = 226814, before for loop |
| [ 0.107753] add_highpages_with_active_regions: for_each_free_mem_range: i = 81604378625, nid = 0, pfn = 226814, e_pfn = 226814, before for loop |
| [ 0.107755] add_highpages_with_active_regions: for_each_free_mem_range: i = 85899345921, nid = 0, pfn = 226814, e_pfn = 226814, before for loop |
| [ 0.107757] add_highpages_with_active_regions: for_each_free_mem_range: i = 90194313217, nid = 0, pfn = 226814, e_pfn = 226814, before for loop |
| [ 0.107760] add_highpages_with_active_regions: for_each_free_mem_range: i = 90194313218, nid = 0, pfn = 226814, e_pfn = 818500, before for loop |
| [ 0.298375] add_highpages_with_active_regions: for_each_free_mem_range: i = 90194313219, nid = 0, pfn = 1048576, e_pfn = 1175552, before for loop |
| [ 0.339227] Initializing Movable for node 0 (00000000:00000000) |
| [ 0.339231] add_highpages_with_active_regions: start_pfn = 0, end_pfn = 0 |
| [ 0.339234] add_highpages_with_active_regions: for_each_free_mem_range: i = 8589934592, nid = 0, pfn = 0, e_pfn = 0, before for loop |
| [ 0.339237] add_highpages_with_active_regions: for_each_free_mem_range: i = 12884901889, nid = 0, pfn = 0, e_pfn = 0, before for loop |
| [ 0.339239] add_highpages_with_active_regions: for_each_free_mem_range: i = 17179869185, nid = 0, pfn = 0, e_pfn = 0, before for loop |
| [ 0.339242] add_highpages_with_active_regions: for_each_free_mem_range: i = 21474836481, nid = 0, pfn = 0, e_pfn = 0, before for loop |
| [ 0.339244] add_highpages_with_active_regions: for_each_free_mem_range: i = 25769803777, nid = 0, pfn = 0, e_pfn = 0, before for loop |
| [ 0.339247] add_highpages_with_active_regions: for_each_free_mem_range: i = 30064771073, nid = 0, pfn = 0, e_pfn = 0, before for loop |
| [ 0.339249] add_highpages_with_active_regions: for_each_free_mem_range: i = 34359738369, nid = 0, pfn = 0, e_pfn = 0, before for loop |
| [ 0.339252] add_highpages_with_active_regions: for_each_free_mem_range: i = 38654705665, nid = 0, pfn = 0, e_pfn = 0, before for loop |
| [ 0.339254] add_highpages_with_active_regions: for_each_free_mem_range: i = 42949672961, nid = 0, pfn = 0, e_pfn = 0, before for loop |
| [ 0.339256] add_highpages_with_active_regions: for_each_free_mem_range: i = 47244640257, nid = 0, pfn = 0, e_pfn = 0, before for loop |
| [ 0.339259] add_highpages_with_active_regions: for_each_free_mem_range: i = 51539607553, nid = 0, pfn = 0, e_pfn = 0, before for loop |
| [ 0.339261] add_highpages_with_active_regions: for_each_free_mem_range: i = 55834574849, nid = 0, pfn = 0, e_pfn = 0, before for loop |
| [ 0.339263] add_highpages_with_active_regions: for_each_free_mem_range: i = 60129542145, nid = 0, pfn = 0, e_pfn = 0, before for loop |
| [ 0.339265] add_highpages_with_active_regions: for_each_free_mem_range: i = 64424509441, nid = 0, pfn = 0, e_pfn = 0, before for loop |
| [ 0.339268] add_highpages_with_active_regions: for_each_free_mem_range: i = 68719476737, nid = 0, pfn = 0, e_pfn = 0, before for loop |
| [ 0.339270] add_highpages_with_active_regions: for_each_free_mem_range: i = 73014444033, nid = 0, pfn = 0, e_pfn = 0, before for loop |
| [ 0.339272] add_highpages_with_active_regions: for_each_free_mem_range: i = 77309411329, nid = 0, pfn = 0, e_pfn = 0, before for loop |
| [ 0.339275] add_highpages_with_active_regions: for_each_free_mem_range: i = 81604378625, nid = 0, pfn = 0, e_pfn = 0, before for loop |
| [ 0.339277] add_highpages_with_active_regions: for_each_free_mem_range: i = 85899345921, nid = 0, pfn = 0, e_pfn = 0, before for loop |
| [ 0.339279] add_highpages_with_active_regions: for_each_free_mem_range: i = 90194313217, nid = 0, pfn = 0, e_pfn = 0, before for loop |
| [ 0.339282] add_highpages_with_active_regions: for_each_free_mem_range: i = 90194313218, nid = 0, pfn = 0, e_pfn = 0, before for loop |
| [ 0.339284] add_highpages_with_active_regions: for_each_free_mem_range: i = 90194313219, nid = 0, pfn = 0, e_pfn = 0, before for loop |
| [ 0.345494] Memory: 3646212K/3781516K available (8966K kernel code, 746K rwdata, 2912K rodata, 1144K init, 640K bss, 135304K reserved, 0K cma-reserved, 2874648K highmem) |
| [ 0.345505] virtual kernel memory layout: |
| fixmap : 0xfff91000 - 0xfffff000 ( 440 kB) |
| cpu_entry : 0xffa00000 - 0xffa4d000 ( 308 kB) |
| pkmap : 0xff600000 - 0xff800000 (2048 kB) |
| vmalloc : 0xf7dfe000 - 0xff5fe000 ( 120 MB) |
| lowmem : 0xc0000000 - 0xf75fe000 ( 885 MB) |
| .init : 0xccc6f000 - 0xccd8d000 (1144 kB) |
| .data : 0xcc8c1818 - 0xccc5c980 (3692 kB) |
| .text : 0xcc000000 - 0xcc8c1818 (8966 kB) |
| [ 0.345506] Checking if this processor honours the WP bit even in supervisor mode...Ok. |
| [ 0.345653] random: get_random_u32 called from cache_random_seq_create+0x7e/0x110 with crng_init=0 |
| [ 0.345925] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=2, Nodes=1 |
| [ 0.345957] After mm_init |
| [ 0.345960] ftrace: allocating 34255 entries in 67 pages |
| [ 0.372329] After sched_init |
| [ 0.372391] rcu: Hierarchical RCU implementation. |
| [ 0.372392] rcu: RCU event tracing is enabled. |
| [ 0.372396] rcu: RCU calculated value of scheduler-enlistment delay is 100 jiffies. |
| [ 0.372407] After rcu_init |
| [ 0.379383] NR_IRQS: 2304, nr_irqs: 440, preallocated irqs: 16 |
| [ 0.380064] After add_latent_entropy |
| [ 0.380081] After add_device_randomness |
| [ 0.380083] After boot_init_stack_canary |
| [ 0.382606] Console: colour VGA+ 80x25 |
| [ 0.382619] printk: console [tty0] enabled |
| [ 0.382669] ACPI: Core revision 20190509 |
| [ 0.383255] clocksource: hpet: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 133484873504 ns |
| [ 0.383277] hpet clockevent registered |
| [ 0.383287] APIC: Switch to symmetric I/O mode setup |
| [ 0.383289] Enabling APIC mode: Flat. Using 1 I/O APICs |
| [ 0.383915] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=0 pin2=0 |
| [ 0.388356] clocksource: tsc-early: mask: 0xffffffffffffffff max_cycles: 0x17107dced96, max_idle_ns: 440795273618 ns |
| [ 0.388366] Calibrating delay loop (skipped), value calculated using timer frequency.. 3200.18 BogoMIPS (lpj=1600094) |
| [ 0.388371] pid_max: default: 32768 minimum: 301 |
| [ 0.388462] LSM: Security Framework initializing |
| [ 0.388501] Mount-cache hash table entries: 2048 (order: 1, 8192 bytes) |
| [ 0.388508] Mountpoint-cache hash table entries: 2048 (order: 1, 8192 bytes) |
| [ 0.388829] *** VALIDATE proc *** |
| [ 0.388940] *** VALIDATE cgroup1 *** |
| [ 0.388943] *** VALIDATE cgroup2 *** |
| [ 0.389039] Last level iTLB entries: 4KB 512, 2MB 8, 4MB 4 |
| [ 0.389042] Last level dTLB entries: 4KB 512, 2MB 8, 4MB 4, 1GB 0 |
| [ 0.389047] Spectre V2 : Mitigation: Full AMD retpoline |
| [ 0.389049] Spectre V2 : Spectre v2 / SpectreRSB mitigation: Filling RSB on context switch |
| [ 0.389051] Speculative Store Bypass: Vulnerable |
| [ 0.389284] Freeing SMP alternatives memory: 32K |
| [ 0.389287] After check_bugs |
| [ 0.389291] After acpi_subsystem_init |
| [ 0.389292] After arch_post_acpi_subsys_init |
| [ 0.389293] After sfi_init_late |
| [ 0.389296] After rcu_scheduler_starting |
| [ 0.389437] After find_task_by_pid_ns |
| [ 0.389439] After numa_default_policy |
| [ 0.389474] After rcu_read_lock |
| [ 0.389475] After rcu_read_unlock |
| [ 0.389481] After kthreadd_done |
| [ 0.390360] random: 1 |
| [ 0.390360] random: 2 |
| [ 0.390360] random: 3 |
| [ 0.390360] random: 4 |
| [ 0.409362] random: 1 |
| [ 0.409363] random: 2 |
| [ 0.409365] random: 3 |
| [ 0.409366] random: 4 |
| [ 0.473362] random: 1 |
| [ 0.473363] random: 2 |
| [ 0.473365] random: 3 |
| [ 0.473365] random: 4 |
| [ 0.491360] smpboot: CPU0: AMD E-350D APU with Radeon(tm) HD Graphics (family: 0x14, model: 0x2, stepping: 0x0) |
| [ 0.491360] Performance Events: AMD PMU driver. |
| [ 0.491360] ... version: 0 |
| [ 0.491360] ... bit width: 48 |
| [ 0.491360] ... generic registers: 4 |
| [ 0.491360] ... value mask: 0000ffffffffffff |
| [ 0.491360] ... max period: 00007fffffffffff |
| [ 0.491360] ... fixed-purpose events: 0 |
| [ 0.491360] ... event mask: 000000000000000f |
| [ 0.491360] rcu: Hierarchical SRCU implementation. |
| [ 0.491569] smp: Bringing up secondary CPUs ... |
| [ 0.491831] x86: Booting SMP configuration: |
| [ 0.491834] .... node #0, CPUs: #1 |
| [ 0.004382] Initializing CPU#1 |
| [ 0.492413] After schedule_preempt_disabled |
| [ 0.492435] smp: Brought up 1 node, 2 CPUs |
| [ 0.492435] smpboot: Max logical packages: 1 |
| [ 0.492435] smpboot: Total of 2 processors activated (6400.37 BogoMIPS) |
| [ 0.493834] devtmpfs: initialized |
| [ 0.494564] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 1911260446275000 ns |
| [ 0.494574] futex hash table entries: 512 (order: 3, 32768 bytes) |
| [ 0.495366] pinctrl core: initialized pinctrl subsystem |
| [ 0.495366] PM: RTC time: 20:44:50, date: 2019-06-13 |
| [ 0.495366] NET: Registered protocol family 16 |
| [ 0.495496] audit: initializing netlink subsys (disabled) |
| [ 0.496381] audit: type=2000 audit(1560458689.113:1): state=initialized audit_enabled=0 res=1 |
| [ 0.496601] cpuidle: using governor menu |
| [ 0.496620] ACPI: bus type PCI registered |
| [ 0.498166] PCI: Using configuration type 1 for base access |
| [ 0.498168] PCI: Using configuration type 1 for extended access |
| [ 0.498503] mtrr: your CPUs had inconsistent variable MTRR settings |
| [ 0.498505] mtrr: probably your BIOS does not setup all CPUs. |
| [ 0.498506] mtrr: corrected configuration. |
| [ 0.502528] HugeTLB registered 2.00 MiB page size, pre-allocated 0 pages |
| [ 0.502528] alg: self-tests disabled |
| [ 0.504471] cryptd: max_cpu_qlen set to 1000 |
| [ 0.506724] ACPI: Added _OSI(Module Device) |
| [ 0.506727] ACPI: Added _OSI(Processor Device) |
| [ 0.506729] ACPI: Added _OSI(3.0 _SCP Extensions) |
| [ 0.506731] ACPI: Added _OSI(Processor Aggregator Device) |
| [ 0.506733] ACPI: Added _OSI(Linux-Dell-Video) |
| [ 0.506736] ACPI: Added _OSI(Linux-Lenovo-NV-HDMI-Audio) |
| [ 0.506738] ACPI: Added _OSI(Linux-HPI-Hybrid-Graphics) |
| [ 0.518635] ACPI: 4 ACPI AML tables successfully acquired and loaded |
| [ 0.521591] ACPI: Interpreter enabled |
| [ 0.521637] ACPI: (supports S0 S1 S3 S5) |
| [ 0.521641] ACPI: Using IOAPIC for interrupt routing |
| [ 0.521678] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug |
| [ 0.522106] ACPI: Enabled 18 GPEs in block 00 to 1F |
| [ 0.532096] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff]) |
| [ 0.532111] acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI HPX-Type3] |
| [ 0.532270] acpi PNP0A08:00: _OSC: OS now controls [PME AER PCIeCapability LTR] |
| [ 0.532723] PCI host bridge to bus 0000:00 |
| [ 0.532729] pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7 window] |
| [ 0.532733] pci_bus 0000:00: root bus resource [io 0x0d00-0xffff window] |
| [ 0.532736] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff] |
| [ 0.532739] pci_bus 0000:00: root bus resource [mem 0xe0000000-0xffffffff] |
| [ 0.532743] pci_bus 0000:00: root bus resource [bus 00-ff] |
| [ 0.532760] pci 0000:00:00.0: [1022:1510] type 00 class 0x060000 |
| [ 0.533051] pci 0000:00:01.0: [1002:9802] type 00 class 0x030000 |
| [ 0.533076] pci 0000:00:01.0: reg 0x10: [mem 0xe0000000-0xefffffff pref] |
| [ 0.533085] pci 0000:00:01.0: reg 0x14: [io 0x2000-0x20ff] |
| [ 0.533094] pci 0000:00:01.0: reg 0x18: [mem 0xf0100000-0xf013ffff] |
| [ 0.533126] pci 0000:00:01.0: enabling Extended Tags |
| [ 0.533177] pci 0000:00:01.0: supports D1 D2 |
| [ 0.533428] pci 0000:00:01.1: [1002:1314] type 00 class 0x040300 |
| [ 0.533450] pci 0000:00:01.1: reg 0x10: [mem 0xf0140000-0xf0143fff] |
| [ 0.533491] pci 0000:00:01.1: enabling Extended Tags |
| [ 0.533540] pci 0000:00:01.1: supports D1 D2 |
| [ 0.533877] pci 0000:00:11.0: [1002:4391] type 00 class 0x010601 |
| [ 0.533907] pci 0000:00:11.0: reg 0x10: [io 0x2410-0x2417] |
| [ 0.533921] pci 0000:00:11.0: reg 0x14: [io 0x2420-0x2423] |
| [ 0.533934] pci 0000:00:11.0: reg 0x18: [io 0x2418-0x241f] |
| [ 0.533948] pci 0000:00:11.0: reg 0x1c: [io 0x2424-0x2427] |
| [ 0.533961] pci 0000:00:11.0: reg 0x20: [io 0x2400-0x240f] |
| [ 0.533975] pci 0000:00:11.0: reg 0x24: [mem 0xf014b000-0xf014b3ff] |
| [ 0.534321] pci 0000:00:12.0: [1002:4397] type 00 class 0x0c0310 |
| [ 0.534346] pci 0000:00:12.0: reg 0x10: [mem 0xf0148000-0xf0148fff] |
| [ 0.534732] pci 0000:00:12.2: [1002:4396] type 00 class 0x0c0320 |
| [ 0.534762] pci 0000:00:12.2: reg 0x10: [mem 0xf014c000-0xf014c0ff] |
| [ 0.534872] pci 0000:00:12.2: supports D1 D2 |
| [ 0.534876] pci 0000:00:12.2: PME# supported from D0 D1 D2 D3hot |
| [ 0.534878] pci 0000:00:12.2: pme_poll = true |
| [ 0.534881] pci 0000:00:12.2: after device_set_wakeup_capable() |
| [ 0.534887] pci 0000:00:12.2: after pci_pme_active() |
| [ 0.535194] pci 0000:00:13.0: [1002:4397] type 00 class 0x0c0310 |
| [ 0.535219] pci 0000:00:13.0: reg 0x10: [mem 0xf0149000-0xf0149fff] |
| [ 0.535607] pci 0000:00:13.2: [1002:4396] type 00 class 0x0c0320 |
| [ 0.535637] pci 0000:00:13.2: reg 0x10: [mem 0xf014d000-0xf014d0ff] |
| [ 0.535749] pci 0000:00:13.2: supports D1 D2 |
| [ 0.535752] pci 0000:00:13.2: PME# supported from D0 D1 D2 D3hot |
| [ 0.535754] pci 0000:00:13.2: pme_poll = true |
| [ 0.535756] pci 0000:00:13.2: after device_set_wakeup_capable() |
| [ 0.535762] pci 0000:00:13.2: after pci_pme_active() |
| [ 0.536068] pci 0000:00:14.0: [1002:4385] type 00 class 0x0c0500 |
| [ 0.536462] pci 0000:00:14.2: [1002:4383] type 00 class 0x040300 |
| [ 0.536496] pci 0000:00:14.2: reg 0x10: [mem 0xf0144000-0xf0147fff 64bit] |
| [ 0.536592] pci 0000:00:14.2: PME# supported from D0 D3hot D3cold |
| [ 0.536594] pci 0000:00:14.2: pme_poll = true |
| [ 0.536596] pci 0000:00:14.2: after device_set_wakeup_capable() |
| [ 0.536602] pci 0000:00:14.2: after pci_pme_active() |
| [ 0.536898] pci 0000:00:14.3: [1002:439d] type 00 class 0x060100 |
| [ 0.537280] pci 0000:00:14.4: [1002:4384] type 01 class 0x060401 |
| [ 0.537656] pci 0000:00:14.5: [1002:4399] type 00 class 0x0c0310 |
| [ 0.537682] pci 0000:00:14.5: reg 0x10: [mem 0xf014a000-0xf014afff] |
| [ 0.538062] pci 0000:00:15.0: [1002:43a0] type 01 class 0x060400 |
| [ 0.538124] pci 0000:00:15.0: enabling Extended Tags |
| [ 0.538201] pci 0000:00:15.0: supports D1 D2 |
| [ 0.538536] pci 0000:00:15.1: [1002:43a1] type 01 class 0x060400 |
| [ 0.538603] pci 0000:00:15.1: enabling Extended Tags |
| [ 0.538677] pci 0000:00:15.1: supports D1 D2 |
| [ 0.539011] pci 0000:00:18.0: [1022:1700] type 00 class 0x060000 |
| [ 0.539260] pci 0000:00:18.1: [1022:1701] type 00 class 0x060000 |
| [ 0.539515] pci 0000:00:18.2: [1022:1702] type 00 class 0x060000 |
| [ 0.539760] pci 0000:00:18.3: [1022:1703] type 00 class 0x060000 |
| [ 0.540025] pci 0000:00:18.4: [1022:1704] type 00 class 0x060000 |
| [ 0.540266] pci 0000:00:18.5: [1022:1718] type 00 class 0x060000 |
| [ 0.540520] pci 0000:00:18.6: [1022:1716] type 00 class 0x060000 |
| [ 0.540759] pci 0000:00:18.7: [1022:1719] type 00 class 0x060000 |
| [ 0.541095] pci_bus 0000:01: extended config space not accessible |
| [ 0.541270] pci 0000:00:14.4: PCI bridge to [bus 01] (subtractive decode) |
| [ 0.541284] pci 0000:00:14.4: bridge window [io 0x0000-0x0cf7 window] (subtractive decode) |
| [ 0.541288] pci 0000:00:14.4: bridge window [io 0x0d00-0xffff window] (subtractive decode) |
| [ 0.541291] pci 0000:00:14.4: bridge window [mem 0x000a0000-0x000bffff] (subtractive decode) |
| [ 0.541294] pci 0000:00:14.4: bridge window [mem 0xe0000000-0xffffffff] (subtractive decode) |
| [ 0.541461] pci 0000:00:15.0: PCI bridge to [bus 02] |
| [ 0.541577] pci 0000:03:00.0: [10ec:8168] type 00 class 0x020000 |
| [ 0.541619] pci 0000:03:00.0: reg 0x10: [io 0x1000-0x10ff] |
| [ 0.541657] pci 0000:03:00.0: reg 0x18: [mem 0xf0004000-0xf0004fff 64bit pref] |
| [ 0.541682] pci 0000:03:00.0: reg 0x20: [mem 0xf0000000-0xf0003fff 64bit pref] |
| [ 0.541834] pci 0000:03:00.0: supports D1 D2 |
| [ 0.541837] pci 0000:03:00.0: PME# supported from D0 D1 D2 D3hot D3cold |
| [ 0.541839] pci 0000:03:00.0: pme_poll = true |
| [ 0.541841] pci 0000:03:00.0: after device_set_wakeup_capable() |
| [ 0.541848] pci 0000:03:00.0: after pci_pme_active() |
| [ 0.544477] pci 0000:00:15.1: PCI bridge to [bus 03] |
| [ 0.544496] pci 0000:00:15.1: bridge window [io 0x1000-0x1fff] |
| [ 0.544514] pci 0000:00:15.1: bridge window [mem 0xf0000000-0xf00fffff 64bit pref] |
| [ 0.544558] pci_bus 0000:00: on NUMA node 0 |
| [ 0.546145] ACPI: PCI Interrupt Link [INTA] (IRQs 3 4 5 7 10 11 12 15) *0 |
| [ 0.546496] ACPI: PCI Interrupt Link [INTB] (IRQs 3 4 5 7 10 11 12 15) *0 |
| [ 0.546809] ACPI: PCI Interrupt Link [INTC] (IRQs 3 4 5 7 10 11 12 15) *0 |
| [ 0.547123] ACPI: PCI Interrupt Link [INTD] (IRQs 3 4 5 7 10 11 12 15) *0 |
| [ 0.547400] ACPI: PCI Interrupt Link [INTE] (IRQs 3 4 5 7 10 11 12 15) *0 |
| [ 0.547714] ACPI: PCI Interrupt Link [INTF] (IRQs 9) *0 |
| [ 0.548024] ACPI: PCI Interrupt Link [INTG] (IRQs 3 4 5 7 10 11 12 15) *0 |
| [ 0.548397] ACPI: PCI Interrupt Link [INTH] (IRQs 3 4 5 7 10 11 12 15) *0 |
| [ 0.548887] pci 0000:00:01.0: vgaarb: setting as boot VGA device |
| [ 0.548887] pci 0000:00:01.0: vgaarb: VGA device added: decodes=io+mem,owns=io+mem,locks=none |
| [ 0.548887] pci 0000:00:01.0: vgaarb: bridge control possible |
| [ 0.548887] vgaarb: loaded |
| [ 0.549385] SCSI subsystem initialized |
| [ 0.549494] libata version 3.00 loaded. |
| [ 0.549494] ACPI: bus type USB registered |
| [ 0.549494] usbcore: registered new interface driver usbfs |
| [ 0.549501] usbcore: registered new interface driver hub |
| [ 0.549538] usbcore: registered new device driver usb |
| [ 0.549670] PCI: Using ACPI for IRQ routing |
| [ 0.549670] PCI: pci_cache_line_size set to 64 bytes |
| [ 0.549670] e820: reserve RAM buffer [mem 0xc7d44000-0xc7ffffff] |
| [ 0.549670] e820: reserve RAM buffer [mem 0x11f000000-0x11fffffff] |
| [ 0.550585] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0 |
| [ 0.550592] hpet0: 3 comparators, 32-bit 14.318180 MHz counter |
| [ 0.552443] clocksource: Switched to clocksource tsc-early |
| [ 0.583307] VFS: Disk quotas dquot_6.6.0 |
| [ 0.583345] VFS: Dquot-cache hash table entries: 1024 (order 0, 4096 bytes) |
| [ 0.583408] *** VALIDATE hugetlbfs *** |
| [ 0.583488] pnp: PnP ACPI init |
| [ 0.584301] pnp 00:00: Plug and Play ACPI device, IDs PNP0b00 (active) |
| [ 0.584413] pnp 00:01: Plug and Play ACPI device, IDs PNP0303 PNP030b (active) |
| [ 0.584494] pnp 00:02: Plug and Play ACPI device, IDs PNP0f13 (active) |
| [ 0.585089] pnp 00:03: Plug and Play ACPI device, IDs PNP0303 PNP030b (active) |
| [ 0.585174] pnp 00:04: Plug and Play ACPI device, IDs PNP0f13 (active) |
| [ 0.585204] pnp: PnP ACPI: found 5 devices |
| [ 0.590351] pci 0000:00:14.4: PCI bridge to [bus 01] |
| [ 0.590443] pci 0000:00:15.0: PCI bridge to [bus 02] |
| [ 0.590458] pci 0000:00:15.1: PCI bridge to [bus 03] |
| [ 0.590464] pci 0000:00:15.1: bridge window [io 0x1000-0x1fff] |
| [ 0.590474] pci 0000:00:15.1: bridge window [mem 0xf0000000-0xf00fffff 64bit pref] |
| [ 0.590486] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7 window] |
| [ 0.590490] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff window] |
| [ 0.590493] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff] |
| [ 0.590496] pci_bus 0000:00: resource 7 [mem 0xe0000000-0xffffffff] |
| [ 0.590500] pci_bus 0000:01: resource 4 [io 0x0000-0x0cf7 window] |
| [ 0.590503] pci_bus 0000:01: resource 5 [io 0x0d00-0xffff window] |
| [ 0.590506] pci_bus 0000:01: resource 6 [mem 0x000a0000-0x000bffff] |
| [ 0.590509] pci_bus 0000:01: resource 7 [mem 0xe0000000-0xffffffff] |
| [ 0.590513] pci_bus 0000:03: resource 0 [io 0x1000-0x1fff] |
| [ 0.590516] pci_bus 0000:03: resource 2 [mem 0xf0000000-0xf00fffff 64bit pref] |
| [ 0.590687] NET: Registered protocol family 2 |
| [ 0.591013] tcp_listen_portaddr_hash hash table entries: 512 (order: 0, 6144 bytes) |
| [ 0.591048] TCP established hash table entries: 8192 (order: 3, 32768 bytes) |
| [ 0.591078] TCP bind hash table entries: 8192 (order: 4, 65536 bytes) |
| [ 0.591114] TCP: Hash tables configured (established 8192 bind 8192) |
| [ 0.591180] UDP hash table entries: 512 (order: 2, 16384 bytes) |
| [ 0.591192] UDP-Lite hash table entries: 512 (order: 2, 16384 bytes) |
| [ 0.591284] NET: Registered protocol family 1 |
| [ 0.591325] pci 0000:00:01.0: Video device with shadowed ROM at [mem 0x000c0000-0x000dffff] |
| [ 0.594393] PCI: CLS 64 bytes, default 64 |
| [ 0.594509] PCI-DMA: Using software bounce buffering for IO (SWIOTLB) |
| [ 0.594513] software IO TLB: mapped [mem 0x2f9fd000-0x339fd000] (64MB) |
| [ 0.594707] LVT offset 0 assigned for vector 0x400 |
| [ 0.594771] perf: AMD IBS detected (0x000000ff) |
| [ 0.596381] Initialise system trusted keyrings |
| [ 0.596604] workingset: timestamp_bits=14 max_order=20 bucket_order=6 |
| [ 0.600078] zbud: loaded |
| [ 0.600925] NET: Registered protocol family 38 |
| [ 0.600937] Key type asymmetric registered |
| [ 0.600941] Asymmetric key parser 'x509' registered |
| [ 0.600967] bounce: pool size: 64 pages |
| [ 0.600988] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 251) |
| [ 0.601122] io scheduler mq-deadline registered |
| [ 0.601125] io scheduler kyber registered |
| [ 0.602081] pcieport 0000:00:15.0: PME: Signaling with IRQ 24 |
| [ 0.602841] pcieport 0000:00:15.1: PME: Signaling with IRQ 25 |
| [ 0.603175] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input0 |
| [ 0.603216] ACPI: Power Button [PWRF] |
| [ 0.604900] thermal LNXTHERM:00: registered as thermal_zone0 |
| [ 0.604905] ACPI: Thermal Zone [TZ00] (45 C) |
| [ 0.605170] initcall serial8250_init blacklisted |
| [ 0.605792] Non-volatile memory driver v1.3 |
| [ 0.605934] Linux agpgart interface v0.103 |
| [ 0.606631] [drm] radeon kernel modesetting enabled. |
| [ 0.606666] radeon 0000:00:01.0: remove_conflicting_pci_framebuffers: bar 0: 0xe0000000 -> 0xefffffff |
| [ 0.606669] radeon 0000:00:01.0: remove_conflicting_pci_framebuffers: bar 2: 0xf0100000 -> 0xf013ffff |
| [ 0.606673] radeon 0000:00:01.0: vgaarb: deactivate vga console |
| [ 0.607536] Console: switching to colour dummy device 80x25 |
| [ 0.608410] [drm] initializing kernel modesetting (PALM 0x1002:0x9802 0x1002:0x9802 0x00). |
| [ 0.608489] ATOM BIOS: AMD |
| [ 0.608561] radeon 0000:00:01.0: VRAM: 384M 0x0000000000000000 - 0x0000000017FFFFFF (384M used) |
| [ 0.608565] radeon 0000:00:01.0: GTT: 1024M 0x0000000018000000 - 0x0000000057FFFFFF |
| [ 0.608573] [drm] Detected VRAM RAM=384M, BAR=256M |
| [ 0.608575] [drm] RAM width 32bits DDR |
| [ 0.608885] [TTM] Zone kernel: Available graphics memory: 385798 KiB |
| [ 0.608888] [TTM] Zone highmem: Available graphics memory: 1823122 KiB |
| [ 0.608889] [TTM] Initializing pool allocator |
| [ 0.608897] [TTM] Initializing DMA pool allocator |
| [ 0.608934] [drm] radeon: 384M of VRAM memory ready |
| [ 0.608936] [drm] radeon: 1024M of GTT memory ready. |
| [ 0.608951] [drm] Loading PALM Microcode |
| [ 0.608959] [drm] Internal thermal controller without fan control |
| [ 0.609124] [drm] Found smc ucode version: 0x00010601 |
| [ 0.609194] [drm] radeon: dpm initialized |
| [ 0.609227] [drm] GART: num cpu pages 262144, num gpu pages 262144 |
| [ 0.619929] [drm] GART: Restore entries: num cpu pages 262144, num gpu pages 262144 |
| [ 0.625050] [drm] GART: Done restoring entries |
| [ 0.625059] [drm] PCIE GART of 1024M enabled (table at 0x0000000000162000). |
| [ 0.625249] radeon 0000:00:01.0: WB enabled |
| [ 0.625258] radeon 0000:00:01.0: fence driver on ring 0 use gpu addr 0x0000000018000c00 and cpu addr 0x(ptrval) |
| [ 0.625261] radeon 0000:00:01.0: fence driver on ring 3 use gpu addr 0x0000000018000c0c and cpu addr 0x(ptrval) |
| [ 0.626136] radeon 0000:00:01.0: fence driver on ring 5 use gpu addr 0x0000000000072118 and cpu addr 0x(ptrval) |
| [ 0.626141] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013). |
| [ 0.626142] [drm] Driver supports precise vblank timestamp query. |
| [ 0.626145] radeon 0000:00:01.0: radeon: MSI limited to 32-bit |
| [ 0.626223] radeon 0000:00:01.0: radeon: using MSI. |
| [ 0.626267] [drm] radeon: irq initialized. |
| [ 0.642878] [drm] ring test on 0 succeeded in 1 usecs |
| [ 0.642886] [drm] ring test on 3 succeeded in 3 usecs |
| [ 0.656947] [drm] ring test on 5 succeeded in 1 usecs |
| [ 0.658966] [drm] UVD initialized successfully. |
| [ 0.659192] [drm] ib test on ring 0 succeeded in 0 usecs |
| [ 0.659249] [drm] ib test on ring 3 succeeded in 0 usecs |
| [ 0.672142] [drm] ib test on ring 5 succeeded |
| [ 0.674877] [drm] Radeon Display Connectors |
| [ 0.674879] [drm] Connector 0: |
| [ 0.674880] [drm] HDMI-A-1 |
| [ 0.674881] [drm] HPD1 |
| [ 0.674885] [drm] DDC: 0x6430 0x6430 0x6434 0x6434 0x6438 0x6438 0x643c 0x643c |
| [ 0.674886] [drm] Encoders: |
| [ 0.674887] [drm] DFP1: INTERNAL_UNIPHY |
| [ 0.674889] [drm] Connector 1: |
| [ 0.674890] [drm] HDMI-A-2 |
| [ 0.674891] [drm] HPD2 |
| [ 0.674894] [drm] DDC: 0x6440 0x6440 0x6444 0x6444 0x6448 0x6448 0x644c 0x644c |
| [ 0.674895] [drm] Encoders: |
| [ 0.674896] [drm] DFP2: INTERNAL_UNIPHY |
| [ 0.674897] [drm] Connector 2: |
| [ 0.674898] [drm] VGA-1 |
| [ 0.674901] [drm] DDC: 0x64d8 0x64d8 0x64dc 0x64dc 0x64e0 0x64e0 0x64e4 0x64e4 |
| [ 0.674902] [drm] Encoders: |
| [ 0.674903] [drm] CRT1: INTERNAL_KLDSCP_DAC1 |
| [ 0.716097] [drm] fb mappable at 0xE0366000 |
| [ 0.716099] [drm] vram apper at 0xE0000000 |
| [ 0.716100] [drm] size 5242880 |
| [ 0.716102] [drm] fb depth is 24 |
| [ 0.716103] [drm] pitch is 5120 |
| [ 0.716375] fbcon: radeondrmfb (fb0) is primary device |
| [ 0.736838] Console: switching to colour frame buffer device 160x64 |
| [ 0.747653] radeon 0000:00:01.0: fb0: radeondrmfb frame buffer device |
| [ 0.747839] [drm] Initialized radeon 2.50.0 20080528 for 0000:00:01.0 on minor 0 |
| [ 0.748549] ahci 0000:00:11.0: version 3.0 |
| [ 0.749293] ahci 0000:00:11.0: AHCI 0001.0200 32 slots 6 ports 6 Gbps 0x3f impl SATA mode |
| [ 0.749299] ahci 0000:00:11.0: flags: 64bit ncq sntf ilck led clo pmp pio slum part |
| [ 0.751908] scsi host0: ahci |
| [ 0.752827] scsi host1: ahci |
| [ 0.753399] scsi host2: ahci |
| [ 0.754057] scsi host3: ahci |
| [ 0.754445] scsi host4: ahci |
| [ 0.755123] scsi host5: ahci |
| [ 0.755444] ata1: SATA max UDMA/133 abar m1024@0xf014b000 port 0xf014b100 irq 19 |
| [ 0.755449] ata2: SATA max UDMA/133 abar m1024@0xf014b000 port 0xf014b180 irq 19 |
| [ 0.755452] ata3: SATA max UDMA/133 abar m1024@0xf014b000 port 0xf014b200 irq 19 |
| [ 0.755456] ata4: SATA max UDMA/133 abar m1024@0xf014b000 port 0xf014b280 irq 19 |
| [ 0.755460] ata5: SATA max UDMA/133 abar m1024@0xf014b000 port 0xf014b300 irq 19 |
| [ 0.755463] ata6: SATA max UDMA/133 abar m1024@0xf014b000 port 0xf014b380 irq 19 |
| [ 0.755722] libphy: Fixed MDIO Bus: probed |
| [ 0.755791] usbcore: registered new interface driver usbserial_generic |
| [ 0.755803] usbserial: USB Serial support registered for generic |
| [ 0.755897] i8042: PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at 0x60,0x64 irq 1,12 |
| [ 0.756189] ata2: SATA link down (SStatus 0 SControl 0) |
| [ 0.756248] ata3: SATA link down (SStatus 0 SControl 0) |
| [ 0.756295] ata4: SATA link down (SStatus 0 SControl 0) |
| [ 0.756340] ata5: SATA link down (SStatus 0 SControl 0) |
| [ 0.758655] ata6: SATA link down (SStatus 0 SControl 0) |
| [ 0.760146] serio: i8042 KBD port at 0x60,0x64 irq 1 |
| [ 0.760178] serio: i8042 AUX port at 0x60,0x64 irq 12 |
| [ 0.760659] mousedev: PS/2 mouse device common for all mice |
| [ 0.761288] ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 0) |
| [ 0.761332] rtc_cmos 00:00: RTC can wake from S4 |
| [ 0.761653] ata1.00: ATA-9: SanDisk SDSSDP064G, 2.0.0, max UDMA/133 |
| [ 0.761657] ata1.00: 125045424 sectors, multi 1: LBA48 NCQ (depth 32) |
| [ 0.761726] rtc_cmos 00:00: registered as rtc0 |
| [ 0.761771] rtc_cmos 00:00: alarms up to one day, 114 bytes nvram, hpet irqs |
| [ 0.761906] w83627ehf: Found NCT6775F chip at 0x290 |
| [ 0.762126] ata1.00: configured for UDMA/133 |
| [ 0.762458] w83627ehf w83627ehf.656: hwmon_device_register() is deprecated. Please convert the driver to use hwmon_device_register_with_info(). |
| [ 0.762579] scsi 0:0:0:0: Direct-Access ATA SanDisk SDSSDP06 0 PQ: 0 ANSI: 5 |
| [ 0.762582] device-mapper: uevent: version 1.0.3 |
| [ 0.762779] device-mapper: ioctl: 4.40.0-ioctl (2019-01-18) initialised: dm-devel@redhat.com |
| [ 0.762974] hidraw: raw HID events driver (C) Jiri Kosina |
| [ 0.763094] sd 0:0:0:0: Attached scsi generic sg0 type 0 |
| [ 0.763195] usbcore: registered new interface driver usbhid |
| [ 0.763196] usbhid: USB HID core driver |
| [ 0.763584] Initializing XFRM netlink socket |
| [ 0.763635] sd 0:0:0:0: [sda] 125045424 512-byte logical blocks: (64.0 GB/59.6 GiB) |
| [ 0.763667] sd 0:0:0:0: [sda] Write Protect is off |
| [ 0.763671] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 |
| [ 0.763721] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA |
| [ 0.763933] NET: Registered protocol family 10 |
| [ 0.764638] Segment Routing with IPv6 |
| [ 0.764681] mip6: Mobile IPv6 |
| [ 0.764687] NET: Registered protocol family 17 |
| [ 0.765392] mce: Using 6 MCE banks |
| [ 0.765434] Using IPI No-Shortcut mode |
| [ 0.765457] sched_clock: Marking stable (761801446, 3382580)->(869485579, -104301553) |
| [ 0.765619] sda: sda1 |
| [ 0.766324] registered taskstats version 1 |
| [ 0.766331] Loading compiled-in X.509 certificates |
| [ 0.766391] zswap: loaded using pool lzo/zbud |
| [ 0.766478] sd 0:0:0:0: [sda] Attached SCSI disk |
| [ 0.767345] PM: Magic number: 7:782:750 |
| [ 0.767382] ata_link link1: hash matches |
| [ 0.767384] link1: hash matches |
| [ 0.767599] rtc_cmos 00:00: setting system clock to 2019-06-13T20:44:50 UTC (1560458690) |
| [ 0.788518] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input1 |
| [ 0.799185] EXT4-fs (sda1): mounted filesystem with ordered data mode. Opts: (null) |
| [ 0.799220] VFS: Mounted root (ext4 filesystem) on device 8:1. |
| [ 0.800569] random: 1 |
| [ 0.800572] random: 2 |
| [ 0.800574] random: 3 |
| [ 0.800575] random: 4 |
| [ 0.800578] random: fast init done |
| [ 0.801341] devtmpfs: mounted |
| [ 0.801379] After kernel_init_freeable |
| [ 0.803408] Freeing unused kernel image memory: 1144K |
| [ 0.803668] Write protecting kernel text and read-only data: 11908k |
| [ 0.803670] NX-protecting the kernel data: 5368k |
| [ 0.804459] x86/mm: Checked W+X mappings: passed, no W+X pages found. |
| [ 0.804460] After mark_readonly |
| [ 0.804467] After pti_finalize |
| [ 0.804469] rcu_end_inkernel_boot |
| [ 0.804470] Run /sbin/init as init process |
| [ 1.148515] systemd[1]: systemd 241 running in system mode. (+PAM +AUDIT +SELINUX +IMA +APPARMOR +SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ +LZ4 +SECCOMP +BLKID +ELFUTILS +KMOD -IDN2 +IDN -PCRE2 default-hierarchy=hybrid) |
| [ 1.160225] systemd[1]: Detected architecture x86. |
| [ 1.164765] systemd[1]: Set hostname to <kodi>. |
| [ 1.165899] do_setlink: 2399 |
| [ 1.165927] do_setlink: 2430 |
| [ 1.165930] do_setlink: 2452 |
| [ 1.165932] do_setlink: 2460 |
| [ 1.165934] do_setlink: 2466 |
| [ 1.165935] do_setlink: 2479 |
| [ 1.165937] do_setlink: 2488 |
| [ 1.165938] do_setlink: 2494 |
| [ 1.166051] do_setlink: 2502 |
| [ 1.166052] do_setlink: 2510 |
| [ 1.166440] systemd[1]: Failed to bump fs.file-max, ignoring: Invalid argument |
| [ 1.363781] systemd[1]: File /lib/systemd/system/systemd-journald.service:12 configures an IP firewall (IPAddressDeny=any), but the local system does not support BPF/cgroup based firewalling. |
| [ 1.363791] systemd[1]: Proceeding WITHOUT firewalling in effect! (This warning is only shown for the first loaded unit using IP firewalling.) |
| [ 1.586662] random: systemd: uninitialized urandom read (16 bytes read) |
| [ 1.589768] random: systemd: uninitialized urandom read (16 bytes read) |
| [ 1.590054] systemd[1]: Listening on Network Service Netlink Socket. |
| [ 1.590225] random: systemd: uninitialized urandom read (16 bytes read) |
| [ 1.590252] systemd[1]: Reached target Local File Systems. |
| [ 1.590458] systemd[1]: Listening on initctl Compatibility Named Pipe. |
| [ 1.590610] systemd[1]: Started Dispatch Password Requests to Console Directory Watch. |
| [ 1.631420] tsc: Refined TSC clocksource calibration: 1600.000 MHz |
| [ 1.631440] clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x171024fa93b, max_idle_ns: 440795253189 ns |
| [ 1.631496] clocksource: Switched to clocksource tsc |
| [ 2.133292] acpi_cpufreq: overriding BIOS provided _PSD data |
| [ 2.468750] 1 |
| [ 2.468777] 2 |
| [ 2.468782] 1 |
| [ 2.468811] 2 |
| [ 2.469513] 3 |
| [ 2.469515] 4 |
| [ 2.469516] 5 |
| [ 2.469517] 7 |
| [ 2.469519] 8 |
| [ 2.469520] 9 |
| [ 2.470273] 3 |
| [ 2.470276] 4 |
| [ 2.470277] 5 |
| [ 2.470278] 7 |
| [ 2.470288] 8 |
| [ 2.470289] 9 |
| [ 2.511451] snd_hda_codec_realtek hdaudioC0D0: ALC892: SKU not ready 0x00000100 |
| [ 2.512049] snd_hda_codec_realtek hdaudioC0D0: autoconfig for ALC892: line_outs=4 (0x14/0x16/0x15/0x17/0x0) type:line |
| [ 2.512053] snd_hda_codec_realtek hdaudioC0D0: speaker_outs=0 (0x0/0x0/0x0/0x0/0x0) |
| [ 2.512063] snd_hda_codec_realtek hdaudioC0D0: hp_outs=1 (0x1b/0x0/0x0/0x0/0x0) |
| [ 2.512066] snd_hda_codec_realtek hdaudioC0D0: mono: mono_out=0x0 |
| [ 2.512069] snd_hda_codec_realtek hdaudioC0D0: dig-out=0x1e/0x0 |
| [ 2.512071] snd_hda_codec_realtek hdaudioC0D0: inputs: |
| [ 2.512076] snd_hda_codec_realtek hdaudioC0D0: Rear Mic=0x18 |
| [ 2.512080] snd_hda_codec_realtek hdaudioC0D0: Front Mic=0x19 |
| [ 2.512083] snd_hda_codec_realtek hdaudioC0D0: Line=0x1a |
| [ 2.512085] snd_hda_codec_realtek hdaudioC0D0: CD=0x1c |
| [ 2.513510] input: HD-Audio Generic HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:01.1/sound/card1/input4 |
| [ 2.573889] input: HDA ATI SB Rear Mic as /devices/pci0000:00/0000:00:14.2/sound/card0/input5 |
| [ 2.574043] input: HDA ATI SB Front Mic as /devices/pci0000:00/0000:00:14.2/sound/card0/input6 |
| [ 2.574194] input: HDA ATI SB Line as /devices/pci0000:00/0000:00:14.2/sound/card0/input7 |
| [ 2.574334] input: HDA ATI SB Line Out Front as /devices/pci0000:00/0000:00:14.2/sound/card0/input8 |
| [ 2.574869] input: HDA ATI SB Line Out Surround as /devices/pci0000:00/0000:00:14.2/sound/card0/input9 |
| [ 2.575024] input: HDA ATI SB Line Out CLFE as /devices/pci0000:00/0000:00:14.2/sound/card0/input10 |
| [ 2.575159] input: HDA ATI SB Line Out Side as /devices/pci0000:00/0000:00:14.2/sound/card0/input11 |
| [ 2.575301] input: HDA ATI SB Front Headphone as /devices/pci0000:00/0000:00:14.2/sound/card0/input12 |
| [ 2.707298] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver |
| [ 2.713451] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver |
| [ 2.715186] ehci-pci: EHCI PCI platform driver |
| [ 2.715761] QUIRK: Enable AMD PLL fix |
| [ 2.715817] ehci-pci 0000:00:12.2: EHCI Host Controller |
| [ 2.715835] ehci-pci 0000:00:12.2: new USB bus registered, assigned bus number 1 |
| [ 2.715849] ehci-pci 0000:00:12.2: applying AMD SB700/SB800/Hudson-2/3 EHCI dummy qh workaround |
| [ 2.715864] ehci-pci 0000:00:12.2: debug port 1 |
| [ 2.715955] ehci-pci 0000:00:12.2: irq 17, io mem 0xf014c000 |
| [ 2.722408] ehci-pci 0000:00:12.2: USB 2.0 started, EHCI 1.00 |
| [ 2.722595] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 5.02 |
| [ 2.722600] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 |
| [ 2.722604] usb usb1: Product: EHCI Host Controller |
| [ 2.722607] usb usb1: Manufacturer: Linux 5.2.0-rc4-00053-gaca4081d71cb ehci_hcd |
| [ 2.722610] usb usb1: SerialNumber: 0000:00:12.2 |
| [ 2.722949] hub 1-0:1.0: USB hub found |
| [ 2.722972] hub 1-0:1.0: 5 ports detected |
| [ 2.723470] ehci-pci 0000:00:13.2: EHCI Host Controller |
| [ 2.723486] ehci-pci 0000:00:13.2: new USB bus registered, assigned bus number 2 |
| [ 2.723497] ehci-pci 0000:00:13.2: applying AMD SB700/SB800/Hudson-2/3 EHCI dummy qh workaround |
| [ 2.723582] ehci-pci 0000:00:13.2: debug port 1 |
| [ 2.723647] ehci-pci 0000:00:13.2: irq 17, io mem 0xf014d000 |
| [ 2.730492] ehci-pci 0000:00:13.2: USB 2.0 started, EHCI 1.00 |
| [ 2.730657] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 5.02 |
| [ 2.730660] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1 |
| [ 2.730664] usb usb2: Product: EHCI Host Controller |
| [ 2.730667] usb usb2: Manufacturer: Linux 5.2.0-rc4-00053-gaca4081d71cb ehci_hcd |
| [ 2.730670] usb usb2: SerialNumber: 0000:00:13.2 |
| [ 2.730970] hub 2-0:1.0: USB hub found |
| [ 2.730994] hub 2-0:1.0: 5 ports detected |
| [ 2.734903] ohci-pci: OHCI PCI platform driver |
| [ 2.735440] ohci-pci 0000:00:12.0: OHCI PCI host controller |
| [ 2.735462] ohci-pci 0000:00:12.0: new USB bus registered, assigned bus number 3 |
| [ 2.735558] ohci-pci 0000:00:12.0: irq 18, io mem 0xf0148000 |
| [ 2.735899] ohci-pci 0000:00:13.0: OHCI PCI host controller |
| [ 2.735909] ohci-pci 0000:00:13.0: new USB bus registered, assigned bus number 4 |
| [ 2.735940] ohci-pci 0000:00:13.0: irq 18, io mem 0xf0149000 |
| [ 2.736216] ohci-pci 0000:00:14.5: OHCI PCI host controller |
| [ 2.736226] ohci-pci 0000:00:14.5: new USB bus registered, assigned bus number 5 |
| [ 2.736255] ohci-pci 0000:00:14.5: irq 18, io mem 0xf014a000 |
| [ 2.752053] piix4_smbus 0000:00:14.0: SMBus Host Controller at 0xb00, revision 0 |
| [ 2.752067] piix4_smbus 0000:00:14.0: Using register 0x2c for SMBus port selection |
| [ 2.752313] piix4_smbus 0000:00:14.0: Auxiliary SMBus Host Controller at 0x8060 |
| [ 2.799810] usb usb4: New USB device found, idVendor=1d6b, idProduct=0001, bcdDevice= 5.02 |
| [ 2.799815] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1 |
| [ 2.799819] usb usb4: Product: OHCI PCI host controller |
| [ 2.799822] usb usb4: Manufacturer: Linux 5.2.0-rc4-00053-gaca4081d71cb ohci_hcd |
| [ 2.799825] usb usb4: SerialNumber: 0000:00:13.0 |
| [ 2.800147] hub 4-0:1.0: USB hub found |
| [ 2.800262] hub 4-0:1.0: 5 ports detected |
| [ 2.800897] usb usb3: New USB device found, idVendor=1d6b, idProduct=0001, bcdDevice= 5.02 |
| [ 2.800902] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1 |
| [ 2.800905] usb usb3: Product: OHCI PCI host controller |
| [ 2.800908] usb usb3: Manufacturer: Linux 5.2.0-rc4-00053-gaca4081d71cb ohci_hcd |
| [ 2.800911] usb usb3: SerialNumber: 0000:00:12.0 |
| [ 2.801118] hub 3-0:1.0: USB hub found |
| [ 2.801206] hub 3-0:1.0: 5 ports detected |
| [ 2.801700] usb usb5: New USB device found, idVendor=1d6b, idProduct=0001, bcdDevice= 5.02 |
| [ 2.801704] usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1 |
| [ 2.801706] usb usb5: Product: OHCI PCI host controller |
| [ 2.801709] usb usb5: Manufacturer: Linux 5.2.0-rc4-00053-gaca4081d71cb ohci_hcd |
| [ 2.801712] usb usb5: SerialNumber: 0000:00:14.5 |
| [ 2.801911] hub 5-0:1.0: USB hub found |
| [ 2.801998] hub 5-0:1.0: 2 ports detected |
| [ 2.889228] libphy: r8169: probed |
| [ 2.892657] r8169 0000:03:00.0 eth0: RTL8168e/8111e, bc:5f:f4:c8:d3:98, XID 2c2, IRQ 28 |
| [ 2.892666] r8169 0000:03:00.0 eth0: jumbo features [frames: 9200 bytes, tx checksumming: ko] |
| [ 3.192454] usb 3-2: new low-speed USB device number 2 using ohci-pci |
| [ 3.388352] usb 3-2: New USB device found, idVendor=1241, idProduct=1122, bcdDevice= 1.00 |
| [ 3.388360] usb 3-2: New USB device strings: Mfr=0, Product=0, SerialNumber=0 |
| [ 3.410144] input: HID 1241:1122 as /devices/pci0000:00/0000:00:12.0/usb3/3-2/3-2:1.0/0003:1241:1122.0001/input/input13 |
| [ 3.410726] hid-generic 0003:1241:1122.0001: input,hidraw0: USB HID v1.00 Mouse [HID 1241:1122] on usb-0000:00:12.0-2/input0 |
| [ 3.713874] random: crng init done |
| [ 3.713879] random: 7 urandom warning(s) missed due to ratelimiting |
| [ 4.176688] r8169 0000:03:00.0 enp3s0: renamed from eth0 |
| [ 64.550639] net_ratelimit: 53 callbacks suppressed |
| [ 64.550643] do_setlink: 2399 |
| [ 64.550646] do_setlink: 2430 |
| [ 64.550650] do_setlink: 2452 |
| [ 64.550652] do_setlink: 2460 |
| [ 64.550654] do_setlink: 2466 |
| [ 64.550656] do_setlink: 2479 |
| [ 64.550658] do_setlink: 2488 |
| [ 64.550660] do_setlink: 2494 |
| [ 64.563186] RTL8211DN Gigabit Ethernet r8169-300:00: attached PHY driver [RTL8211DN Gigabit Ethernet] (mii_bus:phy_addr=r8169-300:00, irq=IGNORE) |
| [ 64.776772] do_setlink: 2502 |
| [ 64.776778] do_setlink: 2510 |
| [ 76.954118] net_ratelimit: 12 callbacks suppressed |
| [ 76.954129] r8169 0000:03:00.0 enp3s0: Link is Up - 100Mbps/Full - flow control rx/tx |
| [ 76.954147] IPv6: ADDRCONF(NETDEV_CHANGE): enp3s0: link becomes ready |
| [ 78.863323] do_setlink: 2399 |
| [ 78.863329] do_setlink: 2430 |
| [ 78.863337] do_setlink: 2452 |
| [ 78.863340] do_setlink: 2460 |
| [ 78.863343] do_setlink: 2466 |
| [ 78.863347] do_setlink: 2479 |
| [ 78.863349] do_setlink: 2488 |
| [ 78.863352] do_setlink: 2494 |