| [ 0.000000] Linux version 5.1.0-10917-g2d90c97dd27e (root@ee888abba79b) (gcc version 8.3.0 (Debian 8.3.0-7)) #38 SMP Wed May 15 06:45:33 UTC 2019 |
| [ 0.000000] x86/fpu: x87 FPU will use FXSAVE |
| [ 0.000000] BIOS-provided physical RAM map: |
| [ 0.000000] BIOS-e820: [mem 0x0000000000000000-0x0000000000000fff] type 16 |
| [ 0.000000] BIOS-e820: [mem 0x0000000000001000-0x000000000009ffff] usable |
| [ 0.000000] BIOS-e820: [mem 0x00000000000c0000-0x00000000000fffff] reserved |
| [ 0.000000] BIOS-e820: [mem 0x0000000000100000-0x00000000c7d47fff] usable |
| [ 0.000000] BIOS-e820: [mem 0x00000000c7d48000-0x00000000c7ffffff] type 16 |
| [ 0.000000] BIOS-e820: [mem 0x00000000c8000000-0x00000000dfffffff] reserved |
| [ 0.000000] BIOS-e820: [mem 0x00000000f8000000-0x00000000fbffffff] reserved |
| [ 0.000000] BIOS-e820: [mem 0x0000000100000000-0x000000011effffff] usable |
| [ 0.000000] kmemleak: Kernel memory leak detector disabled |
| [ 0.000000] NX (Execute Disable) protection: active |
| [ 0.000000] SMBIOS 2.7 present. |
| [ 0.000000] DMI: ASROCK E350M1/E350M1, BIOS 4.9-1645-gcd51d7ced5 05/14/2019 |
| [ 0.000000] tsc: Fast TSC calibration using PIT |
| [ 0.000000] tsc: Detected 1600.031 MHz processor |
| [ 0.005999] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved |
| [ 0.006004] e820: remove [mem 0x000a0000-0x000fffff] usable |
| [ 0.006013] last_pfn = 0x11f000 max_arch_pfn = 0x1000000 |
| [ 0.006024] MTRR default type: uncachable |
| [ 0.006026] MTRR fixed ranges enabled: |
| [ 0.006029] 00000-9FFFF write-back |
| [ 0.006032] A0000-BFFFF uncachable |
| [ 0.006035] C0000-FFFFF write-back |
| [ 0.006037] MTRR variable ranges enabled: |
| [ 0.006040] 0 base 0FFC00000 mask FFFC00000 write-protect |
| [ 0.006043] 1 base 0C0000000 mask FF8000000 write-back |
| [ 0.006046] 2 base 080000000 mask FC0000000 write-back |
| [ 0.006048] 3 base 000000000 mask F80000000 write-back |
| [ 0.006050] 4 disabled |
| [ 0.006051] 5 disabled |
| [ 0.006052] 6 disabled |
| [ 0.006054] 7 disabled |
| [ 0.006057] TOM2: 000000011f000000 aka 4592M |
| [ 0.006255] x86/PAT: Configuration [0-7]: WB WC UC- UC WB WP UC- WT |
| [ 0.006555] check: Scanning 1 areas for low memory corruption |
| [ 0.006561] initial memory mapped: [mem 0x00000000-0x1d3fffff] |
| [ 0.006720] BRK [0x1cf1d000, 0x1cf1dfff] PGTABLE |
| [ 0.006742] BRK [0x1cf1e000, 0x1cf1efff] PGTABLE |
| [ 0.006756] ACPI: Early table checksum verification disabled |
| [ 0.006892] ACPI: RSDP 0x00000000000F0800 000024 (v02 COREv4) |
| [ 0.006899] ACPI: XSDT 0x00000000C7D490E0 000064 (v01 COREv4 COREBOOT 00000000 CORE 20190509) |
| [ 0.006913] ACPI: FACP 0x00000000C7D4B840 0000F4 (v04 COREv4 COREBOOT 00000000 CORE 20190509) |
| [ 0.006927] ACPI: DSDT 0x00000000C7D49280 0025B6 (v02 COREv4 COREBOOT 00010001 INTL 20190509) |
| [ 0.006934] ACPI: FACS 0x00000000C7D49240 000040 |
| [ 0.006939] ACPI: FACS 0x00000000C7D49240 000040 |
| [ 0.006944] ACPI: SSDT 0x00000000C7D4B940 00008A (v02 COREv4 COREBOOT 0000002A CORE 20190509) |
| [ 0.006950] ACPI: APIC 0x00000000C7D4B9D0 00005C (v02 COREv4 COREBOOT 00000000 CORE 20190509) |
| [ 0.006956] ACPI: HEST 0x00000000C7D4BA30 000028 (v01 COREv4 COREBOOT 00000000 CORE 20190509) |
| [ 0.006962] ACPI: SSDT 0x00000000C7D4BA60 00168E (v02 AMD ALIB 00000001 MSFT 04000000) |
| [ 0.006969] ACPI: SSDT 0x00000000C7D4D0F0 0003DE (v01 AMD POWERNOW 00000001 AMD 00000001) |
| [ 0.006976] ACPI: VFCT 0x00000000C7D4D4D0 00E269 (v01 COREv4 COREBOOT 00000000 CORE 20190509) |
| [ 0.006982] ACPI: HPET 0x00000000C7D5B740 000038 (v01 COREv4 COREBOOT 00000000 CORE 20190509) |
| [ 0.007000] ACPI: Local APIC address 0xfee00000 |
| [ 0.007008] 3706MB HIGHMEM available. |
| [ 0.007013] 885MB LOWMEM available. |
| [ 0.007015] mapped low ram: 0 - 375fe000 |
| [ 0.007016] low ram: 0 - 375fe000 |
| [ 0.007031] BRK [0x1cf1f000, 0x1cf1ffff] PGTABLE |
| [ 0.017910] Zone ranges: |
| [ 0.017913] DMA [mem 0x0000000000001000-0x0000000000ffffff] |
| [ 0.017918] Normal [mem 0x0000000001000000-0x00000000375fdfff] |
| [ 0.017921] HighMem [mem 0x00000000375fe000-0x000000011effffff] |
| [ 0.017923] Movable zone start for each node |
| [ 0.017924] Early memory node ranges |
| [ 0.017927] node 0: [mem 0x0000000000001000-0x000000000009ffff] |
| [ 0.017929] node 0: [mem 0x0000000000100000-0x00000000c7d47fff] |
| [ 0.017931] node 0: [mem 0x0000000100000000-0x000000011effffff] |
| [ 0.022081] Zeroed struct page in unavailable ranges: 99097 pages |
| [ 0.022086] Initmem setup node 0 [mem 0x0000000000001000-0x000000011effffff] |
| [ 0.022091] On node 0 totalpages: 945383 |
| [ 0.022094] DMA zone: 40 pages used for memmap |
| [ 0.022096] DMA zone: 0 pages reserved |
| [ 0.022097] DMA zone: 3999 pages, LIFO batch:0 |
| [ 0.022310] Normal zone: 2175 pages used for memmap |
| [ 0.022312] Normal zone: 222718 pages, LIFO batch:63 |
| [ 0.033668] HighMem zone: 718666 pages, LIFO batch:63 |
| [ 0.076245] Using APIC driver default |
| [ 0.076523] ACPI: Local APIC address 0xfee00000 |
| [ 0.076548] IOAPIC[0]: apic_id 2, version 33, address 0xfec00000, GSI 0-23 |
| [ 0.076555] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) |
| [ 0.076559] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 low level) |
| [ 0.076562] ACPI: IRQ0 used by override. |
| [ 0.076564] ACPI: IRQ9 used by override. |
| [ 0.076568] Using ACPI (MADT) for SMP configuration information |
| [ 0.076572] ACPI: HPET id: 0x43538210 base: 0xfed00000 |
| [ 0.076585] smpboot: Allowing 2 CPUs, 0 hotplug CPUs |
| [ 0.076612] [mem 0xe0000000-0xf7ffffff] available for PCI devices |
| [ 0.076620] clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 1910969940391419 ns |
| [ 0.076624] After setup_arch |
| [ 0.076625] After mm_init_cpumask |
| [ 0.076635] After setup_command_line |
| [ 0.076637] After setup_nr_cpu_ids |
| [ 0.076639] setup_percpu: NR_CPUS:2 nr_cpumask_bits:2 nr_cpu_ids:2 nr_node_ids:1 |
| [ 0.076903] percpu: Embedded 33 pages/cpu s102668 r0 d32500 u135168 |
| [ 0.076915] pcpu-alloc: s102668 r0 d32500 u135168 alloc=33*4096 |
| [ 0.076917] pcpu-alloc: [0] 0 [0] 1 |
| [ 0.076944] After setup_per_cpu_areas |
| [ 0.076945] After smp_perpare_boot_cpu |
| [ 0.076947] After boot_cpu_hotplug_init |
| [ 0.076953] Built 1 zonelists, mobility grouping on. Total pages: 943168 |
| [ 0.076958] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-5.1.0-10917-g2d90c97dd27e root=/dev/sda1 rw noisapnp cryptomgr.notests quiet memory_corruption_check=1 memory_corruption_check_size=512k memory_corruption_check_period=5 iomem=relaxed apparmor=0 selinux=0 kmemleak=off initcall_blacklist=serial8250_init udev.children_max=2 udev.log_priority=info |
| [ 0.077348] blacklisting initcall serial8250_init |
| [ 0.077701] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes) |
| [ 0.077875] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes) |
| [ 0.077887] Initializing CPU#0 |
| [ 0.113423] Initializing HighMem for node 0 (000375fe:0011f000) |
| [ 0.113427] add_highpages_with_active_regions: start_pfn = 226814, end_pfn = 1175552 |
| [ 0.113432] add_highpages_with_active_regions: for_each_free_mem_range: i = 8589934592, nid = 0, pfn = 226814, e_pfn = 226814, before for loop |
| [ 0.113435] add_highpages_with_active_regions: for_each_free_mem_range: i = 12884901889, nid = 0, pfn = 226814, e_pfn = 226814, before for loop |
| [ 0.113438] add_highpages_with_active_regions: for_each_free_mem_range: i = 17179869185, nid = 0, pfn = 226814, e_pfn = 226814, before for loop |
| [ 0.113440] add_highpages_with_active_regions: for_each_free_mem_range: i = 21474836481, nid = 0, pfn = 226814, e_pfn = 226814, before for loop |
| [ 0.113443] add_highpages_with_active_regions: for_each_free_mem_range: i = 25769803777, nid = 0, pfn = 226814, e_pfn = 226814, before for loop |
| [ 0.113445] add_highpages_with_active_regions: for_each_free_mem_range: i = 30064771073, nid = 0, pfn = 226814, e_pfn = 226814, before for loop |
| [ 0.113448] add_highpages_with_active_regions: for_each_free_mem_range: i = 34359738369, nid = 0, pfn = 226814, e_pfn = 226814, before for loop |
| [ 0.113450] add_highpages_with_active_regions: for_each_free_mem_range: i = 38654705665, nid = 0, pfn = 226814, e_pfn = 226814, before for loop |
| [ 0.113453] add_highpages_with_active_regions: for_each_free_mem_range: i = 42949672961, nid = 0, pfn = 226814, e_pfn = 226814, before for loop |
| [ 0.113455] add_highpages_with_active_regions: for_each_free_mem_range: i = 47244640257, nid = 0, pfn = 226814, e_pfn = 226814, before for loop |
| [ 0.113458] add_highpages_with_active_regions: for_each_free_mem_range: i = 51539607553, nid = 0, pfn = 226814, e_pfn = 226814, before for loop |
| [ 0.113460] add_highpages_with_active_regions: for_each_free_mem_range: i = 55834574849, nid = 0, pfn = 226814, e_pfn = 226814, before for loop |
| [ 0.113462] add_highpages_with_active_regions: for_each_free_mem_range: i = 60129542145, nid = 0, pfn = 226814, e_pfn = 226814, before for loop |
| [ 0.113465] add_highpages_with_active_regions: for_each_free_mem_range: i = 64424509441, nid = 0, pfn = 226814, e_pfn = 226814, before for loop |
| [ 0.113467] add_highpages_with_active_regions: for_each_free_mem_range: i = 68719476737, nid = 0, pfn = 226814, e_pfn = 226814, before for loop |
| [ 0.113470] add_highpages_with_active_regions: for_each_free_mem_range: i = 73014444033, nid = 0, pfn = 226814, e_pfn = 226814, before for loop |
| [ 0.113472] add_highpages_with_active_regions: for_each_free_mem_range: i = 77309411329, nid = 0, pfn = 226814, e_pfn = 226814, before for loop |
| [ 0.113475] add_highpages_with_active_regions: for_each_free_mem_range: i = 81604378625, nid = 0, pfn = 226814, e_pfn = 226814, before for loop |
| [ 0.113477] add_highpages_with_active_regions: for_each_free_mem_range: i = 85899345921, nid = 0, pfn = 226814, e_pfn = 226814, before for loop |
| [ 0.113480] add_highpages_with_active_regions: for_each_free_mem_range: i = 90194313217, nid = 0, pfn = 226814, e_pfn = 226814, before for loop |
| [ 0.113482] add_highpages_with_active_regions: for_each_free_mem_range: i = 90194313218, nid = 0, pfn = 226814, e_pfn = 818504, before for loop |
| [ 0.300290] add_highpages_with_active_regions: for_each_free_mem_range: i = 90194313219, nid = 0, pfn = 1048576, e_pfn = 1175552, before for loop |
| [ 0.340396] Initializing Movable for node 0 (00000000:00000000) |
| [ 0.340399] add_highpages_with_active_regions: start_pfn = 0, end_pfn = 0 |
| [ 0.340403] add_highpages_with_active_regions: for_each_free_mem_range: i = 8589934592, nid = 0, pfn = 0, e_pfn = 0, before for loop |
| [ 0.340406] add_highpages_with_active_regions: for_each_free_mem_range: i = 12884901889, nid = 0, pfn = 0, e_pfn = 0, before for loop |
| [ 0.340408] add_highpages_with_active_regions: for_each_free_mem_range: i = 17179869185, nid = 0, pfn = 0, e_pfn = 0, before for loop |
| [ 0.340411] add_highpages_with_active_regions: for_each_free_mem_range: i = 21474836481, nid = 0, pfn = 0, e_pfn = 0, before for loop |
| [ 0.340413] add_highpages_with_active_regions: for_each_free_mem_range: i = 25769803777, nid = 0, pfn = 0, e_pfn = 0, before for loop |
| [ 0.340416] add_highpages_with_active_regions: for_each_free_mem_range: i = 30064771073, nid = 0, pfn = 0, e_pfn = 0, before for loop |
| [ 0.340418] add_highpages_with_active_regions: for_each_free_mem_range: i = 34359738369, nid = 0, pfn = 0, e_pfn = 0, before for loop |
| [ 0.340421] add_highpages_with_active_regions: for_each_free_mem_range: i = 38654705665, nid = 0, pfn = 0, e_pfn = 0, before for loop |
| [ 0.340423] add_highpages_with_active_regions: for_each_free_mem_range: i = 42949672961, nid = 0, pfn = 0, e_pfn = 0, before for loop |
| [ 0.340425] add_highpages_with_active_regions: for_each_free_mem_range: i = 47244640257, nid = 0, pfn = 0, e_pfn = 0, before for loop |
| [ 0.340428] add_highpages_with_active_regions: for_each_free_mem_range: i = 51539607553, nid = 0, pfn = 0, e_pfn = 0, before for loop |
| [ 0.340430] add_highpages_with_active_regions: for_each_free_mem_range: i = 55834574849, nid = 0, pfn = 0, e_pfn = 0, before for loop |
| [ 0.340433] add_highpages_with_active_regions: for_each_free_mem_range: i = 60129542145, nid = 0, pfn = 0, e_pfn = 0, before for loop |
| [ 0.340435] add_highpages_with_active_regions: for_each_free_mem_range: i = 64424509441, nid = 0, pfn = 0, e_pfn = 0, before for loop |
| [ 0.340438] add_highpages_with_active_regions: for_each_free_mem_range: i = 68719476737, nid = 0, pfn = 0, e_pfn = 0, before for loop |
| [ 0.340440] add_highpages_with_active_regions: for_each_free_mem_range: i = 73014444033, nid = 0, pfn = 0, e_pfn = 0, before for loop |
| [ 0.340442] add_highpages_with_active_regions: for_each_free_mem_range: i = 77309411329, nid = 0, pfn = 0, e_pfn = 0, before for loop |
| [ 0.340445] add_highpages_with_active_regions: for_each_free_mem_range: i = 81604378625, nid = 0, pfn = 0, e_pfn = 0, before for loop |
| [ 0.340448] add_highpages_with_active_regions: for_each_free_mem_range: i = 85899345921, nid = 0, pfn = 0, e_pfn = 0, before for loop |
| [ 0.340450] add_highpages_with_active_regions: for_each_free_mem_range: i = 90194313217, nid = 0, pfn = 0, e_pfn = 0, before for loop |
| [ 0.340453] add_highpages_with_active_regions: for_each_free_mem_range: i = 90194313218, nid = 0, pfn = 0, e_pfn = 0, before for loop |
| [ 0.340455] add_highpages_with_active_regions: for_each_free_mem_range: i = 90194313219, nid = 0, pfn = 0, e_pfn = 0, before for loop |
| [ 0.346723] Memory: 3645284K/3781532K available (8957K kernel code, 746K rwdata, 2908K rodata, 1144K init, 640K bss, 136248K reserved, 0K cma-reserved, 2874664K highmem) |
| [ 0.346735] virtual kernel memory layout: |
| fixmap : 0xfff91000 - 0xfffff000 ( 440 kB) |
| cpu_entry : 0xffa00000 - 0xffa4d000 ( 308 kB) |
| pkmap : 0xff600000 - 0xff800000 (2048 kB) |
| vmalloc : 0xf7dfe000 - 0xff5fe000 ( 120 MB) |
| lowmem : 0xc0000000 - 0xf75fe000 ( 885 MB) |
| .init : 0xdcc6b000 - 0xdcd89000 (1144 kB) |
| .data : 0xdc8bf458 - 0xdcc58ac0 (3685 kB) |
| .text : 0xdc000000 - 0xdc8bf458 (8957 kB) |
| [ 0.346737] Checking if this processor honours the WP bit even in supervisor mode...Ok. |
| [ 0.346888] random: get_random_u32 called from cache_random_seq_create+0x7e/0x110 with crng_init=0 |
| [ 0.347167] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=2, Nodes=1 |
| [ 0.347185] After mm_init |
| [ 0.347188] ftrace: allocating 34238 entries in 67 pages |
| [ 0.373658] After sched_init |
| [ 0.373717] rcu: Hierarchical RCU implementation. |
| [ 0.373718] rcu: RCU event tracing is enabled. |
| [ 0.373722] rcu: RCU calculated value of scheduler-enlistment delay is 100 jiffies. |
| [ 0.373732] After rcu_init |
| [ 0.381063] NR_IRQS: 2304, nr_irqs: 440, preallocated irqs: 16 |
| [ 0.381745] After add_latent_entropy |
| [ 0.381767] After add_device_randomness |
| [ 0.381770] After boot_init_stack_canary |
| [ 0.384259] Console: colour VGA+ 80x25 |
| [ 0.384272] printk: console [tty0] enabled |
| [ 0.384321] ACPI: Core revision 20190405 |
| [ 0.384896] clocksource: hpet: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 133484873504 ns |
| [ 0.384917] hpet clockevent registered |
| [ 0.384927] APIC: Switch to symmetric I/O mode setup |
| [ 0.384929] Enabling APIC mode: Flat. Using 1 I/O APICs |
| [ 0.385557] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=0 pin2=0 |
| [ 0.389995] clocksource: tsc-early: mask: 0xffffffffffffffff max_cycles: 0x17104232a28, max_idle_ns: 440795225105 ns |
| [ 0.390006] Calibrating delay loop (skipped), value calculated using timer frequency.. 3200.06 BogoMIPS (lpj=1600031) |
| [ 0.390012] pid_max: default: 32768 minimum: 301 |
| [ 0.390103] LSM: Security Framework initializing |
| [ 0.390143] Mount-cache hash table entries: 2048 (order: 1, 8192 bytes) |
| [ 0.390150] Mountpoint-cache hash table entries: 2048 (order: 1, 8192 bytes) |
| [ 0.390473] *** VALIDATE proc *** |
| [ 0.390583] *** VALIDATE cgroup1 *** |
| [ 0.390586] *** VALIDATE cgroup2 *** |
| [ 0.390682] Last level iTLB entries: 4KB 512, 2MB 8, 4MB 4 |
| [ 0.390684] Last level dTLB entries: 4KB 512, 2MB 8, 4MB 4, 1GB 0 |
| [ 0.390691] Spectre V2 : Mitigation: Full AMD retpoline |
| [ 0.390692] Spectre V2 : Spectre v2 / SpectreRSB mitigation: Filling RSB on context switch |
| [ 0.390694] Speculative Store Bypass: Vulnerable |
| [ 0.390932] Freeing SMP alternatives memory: 32K |
| [ 0.390935] After check_bugs |
| [ 0.390938] After acpi_subsystem_init |
| [ 0.390940] After arch_post_acpi_subsys_init |
| [ 0.390941] After sfi_init_late |
| [ 0.390943] After rcu_scheduler_starting |
| [ 0.391077] After find_task_by_pid_ns |
| [ 0.391079] After numa_default_policy |
| [ 0.391115] After rcu_read_lock |
| [ 0.391116] After rcu_read_unlock |
| [ 0.391122] After kthreadd_done |
| [ 0.391999] random: 1 |
| [ 0.391999] random: 2 |
| [ 0.391999] random: 3 |
| [ 0.391999] random: 4 |
| [ 0.411002] random: 1 |
| [ 0.411003] random: 2 |
| [ 0.411004] random: 3 |
| [ 0.411005] random: 4 |
| [ 0.475002] random: 1 |
| [ 0.475003] random: 2 |
| [ 0.475004] random: 3 |
| [ 0.475005] random: 4 |
| [ 0.492999] smpboot: CPU0: AMD E-350D APU with Radeon(tm) HD Graphics (family: 0x14, model: 0x2, stepping: 0x0) |
| [ 0.492999] Performance Events: AMD PMU driver. |
| [ 0.492999] ... version: 0 |
| [ 0.492999] ... bit width: 48 |
| [ 0.492999] ... generic registers: 4 |
| [ 0.492999] ... value mask: 0000ffffffffffff |
| [ 0.492999] ... max period: 00007fffffffffff |
| [ 0.492999] ... fixed-purpose events: 0 |
| [ 0.492999] ... event mask: 000000000000000f |
| [ 0.492999] rcu: Hierarchical SRCU implementation. |
| [ 0.493207] smp: Bringing up secondary CPUs ... |
| [ 0.493469] x86: Booting SMP configuration: |
| [ 0.493472] .... node #0, CPUs: #1 |
| [ 0.004340] Initializing CPU#1 |
| [ 0.494059] After schedule_preempt_disabled |
| [ 0.494083] smp: Brought up 1 node, 2 CPUs |
| [ 0.494083] smpboot: Max logical packages: 1 |
| [ 0.494083] smpboot: Total of 2 processors activated (6400.12 BogoMIPS) |
| [ 0.496133] devtmpfs: initialized |
| [ 0.497013] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 1911260446275000 ns |
| [ 0.497013] futex hash table entries: 512 (order: 3, 32768 bytes) |
| [ 0.497013] pinctrl core: initialized pinctrl subsystem |
| [ 0.497013] PM: RTC time: 06:57:17, date: 2019-05-15 |
| [ 0.497184] NET: Registered protocol family 16 |
| [ 0.497623] audit: initializing netlink subsys (disabled) |
| [ 0.498074] audit: type=2000 audit(1557903437.113:1): state=initialized audit_enabled=0 res=1 |
| [ 0.498269] cpuidle: using governor menu |
| [ 0.498364] ACPI: bus type PCI registered |
| [ 0.499716] PCI: Using configuration type 1 for base access |
| [ 0.499718] PCI: Using configuration type 1 for extended access |
| [ 0.500117] mtrr: your CPUs had inconsistent variable MTRR settings |
| [ 0.500118] mtrr: probably your BIOS does not setup all CPUs. |
| [ 0.500119] mtrr: corrected configuration. |
| [ 0.504106] HugeTLB registered 2.00 MiB page size, pre-allocated 0 pages |
| [ 0.505084] alg: self-tests disabled |
| [ 0.506087] cryptd: max_cpu_qlen set to 1000 |
| [ 0.509182] ACPI: Added _OSI(Module Device) |
| [ 0.509185] ACPI: Added _OSI(Processor Device) |
| [ 0.509187] ACPI: Added _OSI(3.0 _SCP Extensions) |
| [ 0.509189] ACPI: Added _OSI(Processor Aggregator Device) |
| [ 0.509191] ACPI: Added _OSI(Linux-Dell-Video) |
| [ 0.509194] ACPI: Added _OSI(Linux-Lenovo-NV-HDMI-Audio) |
| [ 0.509197] ACPI: Added _OSI(Linux-HPI-Hybrid-Graphics) |
| [ 0.520592] ACPI: 4 ACPI AML tables successfully acquired and loaded |
| [ 0.523668] ACPI: Interpreter enabled |
| [ 0.523717] ACPI: (supports S0 S1 S3 S5) |
| [ 0.523720] ACPI: Using IOAPIC for interrupt routing |
| [ 0.523759] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug |
| [ 0.524193] ACPI: Enabled 19 GPEs in block 00 to 1F |
| [ 0.534095] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff]) |
| [ 0.534110] acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI HPX-Type3] |
| [ 0.534270] acpi PNP0A08:00: _OSC: OS now controls [PME AER PCIeCapability LTR] |
| [ 0.534704] PCI host bridge to bus 0000:00 |
| [ 0.534710] pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7 window] |
| [ 0.534713] pci_bus 0000:00: root bus resource [io 0x0d00-0xffff window] |
| [ 0.534717] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff] |
| [ 0.534720] pci_bus 0000:00: root bus resource [mem 0xe0000000-0xffffffff] |
| [ 0.534724] pci_bus 0000:00: root bus resource [bus 00-ff] |
| [ 0.534742] pci 0000:00:00.0: [1022:1510] type 00 class 0x060000 |
| [ 0.535029] pci 0000:00:01.0: [1002:9802] type 00 class 0x030000 |
| [ 0.535054] pci 0000:00:01.0: reg 0x10: [mem 0xe0000000-0xefffffff pref] |
| [ 0.535064] pci 0000:00:01.0: reg 0x14: [io 0x2000-0x20ff] |
| [ 0.535074] pci 0000:00:01.0: reg 0x18: [mem 0xf0100000-0xf013ffff] |
| [ 0.535106] pci 0000:00:01.0: enabling Extended Tags |
| [ 0.535157] pci 0000:00:01.0: supports D1 D2 |
| [ 0.535391] pci 0000:00:01.1: [1002:1314] type 00 class 0x040300 |
| [ 0.535413] pci 0000:00:01.1: reg 0x10: [mem 0xf0140000-0xf0143fff] |
| [ 0.535454] pci 0000:00:01.1: enabling Extended Tags |
| [ 0.535502] pci 0000:00:01.1: supports D1 D2 |
| [ 0.535832] pci 0000:00:11.0: [1002:4391] type 00 class 0x010601 |
| [ 0.535861] pci 0000:00:11.0: reg 0x10: [io 0x2410-0x2417] |
| [ 0.535874] pci 0000:00:11.0: reg 0x14: [io 0x2420-0x2423] |
| [ 0.535888] pci 0000:00:11.0: reg 0x18: [io 0x2418-0x241f] |
| [ 0.535901] pci 0000:00:11.0: reg 0x1c: [io 0x2424-0x2427] |
| [ 0.535915] pci 0000:00:11.0: reg 0x20: [io 0x2400-0x240f] |
| [ 0.535928] pci 0000:00:11.0: reg 0x24: [mem 0xf014b000-0xf014b3ff] |
| [ 0.536279] pci 0000:00:12.0: [1002:4397] type 00 class 0x0c0310 |
| [ 0.536305] pci 0000:00:12.0: reg 0x10: [mem 0xf0148000-0xf0148fff] |
| [ 0.536673] pci 0000:00:12.2: [1002:4396] type 00 class 0x0c0320 |
| [ 0.536703] pci 0000:00:12.2: reg 0x10: [mem 0xf014c000-0xf014c0ff] |
| [ 0.536814] pci 0000:00:12.2: supports D1 D2 |
| [ 0.536818] pci 0000:00:12.2: PME# supported from D0 D1 D2 D3hot |
| [ 0.536820] pci 0000:00:12.2: pme_poll = true |
| [ 0.536823] pci 0000:00:12.2: after device_set_wakeup_capable() |
| [ 0.536829] pci 0000:00:12.2: after pci_pme_active() |
| [ 0.537139] pci 0000:00:13.0: [1002:4397] type 00 class 0x0c0310 |
| [ 0.537164] pci 0000:00:13.0: reg 0x10: [mem 0xf0149000-0xf0149fff] |
| [ 0.537533] pci 0000:00:13.2: [1002:4396] type 00 class 0x0c0320 |
| [ 0.537562] pci 0000:00:13.2: reg 0x10: [mem 0xf014d000-0xf014d0ff] |
| [ 0.537672] pci 0000:00:13.2: supports D1 D2 |
| [ 0.537675] pci 0000:00:13.2: PME# supported from D0 D1 D2 D3hot |
| [ 0.537677] pci 0000:00:13.2: pme_poll = true |
| [ 0.537680] pci 0000:00:13.2: after device_set_wakeup_capable() |
| [ 0.537685] pci 0000:00:13.2: after pci_pme_active() |
| [ 0.537985] pci 0000:00:14.0: [1002:4385] type 00 class 0x0c0500 |
| [ 0.538368] pci 0000:00:14.2: [1002:4383] type 00 class 0x040300 |
| [ 0.538403] pci 0000:00:14.2: reg 0x10: [mem 0xf0144000-0xf0147fff 64bit] |
| [ 0.538498] pci 0000:00:14.2: PME# supported from D0 D3hot D3cold |
| [ 0.538501] pci 0000:00:14.2: pme_poll = true |
| [ 0.538503] pci 0000:00:14.2: after device_set_wakeup_capable() |
| [ 0.538509] pci 0000:00:14.2: after pci_pme_active() |
| [ 0.538803] pci 0000:00:14.3: [1002:439d] type 00 class 0x060100 |
| [ 0.539195] pci 0000:00:14.4: [1002:4384] type 01 class 0x060401 |
| [ 0.539547] pci 0000:00:14.5: [1002:4399] type 00 class 0x0c0310 |
| [ 0.539573] pci 0000:00:14.5: reg 0x10: [mem 0xf014a000-0xf014afff] |
| [ 0.539948] pci 0000:00:15.0: [1002:43a0] type 01 class 0x060400 |
| [ 0.540017] pci 0000:00:15.0: enabling Extended Tags |
| [ 0.540096] pci 0000:00:15.0: supports D1 D2 |
| [ 0.540415] pci 0000:00:15.1: [1002:43a1] type 01 class 0x060400 |
| [ 0.540482] pci 0000:00:15.1: enabling Extended Tags |
| [ 0.540557] pci 0000:00:15.1: supports D1 D2 |
| [ 0.540883] pci 0000:00:18.0: [1022:1700] type 00 class 0x060000 |
| [ 0.541140] pci 0000:00:18.1: [1022:1701] type 00 class 0x060000 |
| [ 0.541375] pci 0000:00:18.2: [1022:1702] type 00 class 0x060000 |
| [ 0.541615] pci 0000:00:18.3: [1022:1703] type 00 class 0x060000 |
| [ 0.541878] pci 0000:00:18.4: [1022:1704] type 00 class 0x060000 |
| [ 0.542122] pci 0000:00:18.5: [1022:1718] type 00 class 0x060000 |
| [ 0.542359] pci 0000:00:18.6: [1022:1716] type 00 class 0x060000 |
| [ 0.542597] pci 0000:00:18.7: [1022:1719] type 00 class 0x060000 |
| [ 0.542926] pci_bus 0000:01: extended config space not accessible |
| [ 0.543033] pci 0000:00:14.4: PCI bridge to [bus 01] (subtractive decode) |
| [ 0.543047] pci 0000:00:14.4: bridge window [io 0x0000-0x0cf7 window] (subtractive decode) |
| [ 0.543050] pci 0000:00:14.4: bridge window [io 0x0d00-0xffff window] (subtractive decode) |
| [ 0.543053] pci 0000:00:14.4: bridge window [mem 0x000a0000-0x000bffff] (subtractive decode) |
| [ 0.543056] pci 0000:00:14.4: bridge window [mem 0xe0000000-0xffffffff] (subtractive decode) |
| [ 0.543136] pci 0000:00:15.0: PCI bridge to [bus 02] |
| [ 0.543251] pci 0000:03:00.0: [10ec:8168] type 00 class 0x020000 |
| [ 0.543294] pci 0000:03:00.0: reg 0x10: [io 0x1000-0x10ff] |
| [ 0.543333] pci 0000:03:00.0: reg 0x18: [mem 0xf0004000-0xf0004fff 64bit pref] |
| [ 0.543359] pci 0000:03:00.0: reg 0x20: [mem 0xf0000000-0xf0003fff 64bit pref] |
| [ 0.543510] pci 0000:03:00.0: supports D1 D2 |
| [ 0.543513] pci 0000:03:00.0: PME# supported from D0 D1 D2 D3hot D3cold |
| [ 0.543515] pci 0000:03:00.0: pme_poll = true |
| [ 0.543517] pci 0000:03:00.0: after device_set_wakeup_capable() |
| [ 0.543524] pci 0000:03:00.0: after pci_pme_active() |
| [ 0.547116] pci 0000:00:15.1: PCI bridge to [bus 03] |
| [ 0.547135] pci 0000:00:15.1: bridge window [io 0x1000-0x1fff] |
| [ 0.547153] pci 0000:00:15.1: bridge window [mem 0xf0000000-0xf00fffff 64bit pref] |
| [ 0.547198] pci_bus 0000:00: on NUMA node 0 |
| [ 0.548786] ACPI: PCI Interrupt Link [INTA] (IRQs 3 4 5 7 10 11 12 15) *0, disabled. |
| [ 0.549133] ACPI: PCI Interrupt Link [INTB] (IRQs 3 4 5 7 10 11 12 15) *0, disabled. |
| [ 0.549452] ACPI: PCI Interrupt Link [INTC] (IRQs 3 4 5 7 10 11 12 15) *0, disabled. |
| [ 0.549767] ACPI: PCI Interrupt Link [INTD] (IRQs 3 4 5 7 10 11 12 15) *0, disabled. |
| [ 0.550039] ACPI: PCI Interrupt Link [INTE] (IRQs 3 4 5 7 10 11 12 15) *0, disabled. |
| [ 0.550355] ACPI: PCI Interrupt Link [INTF] (IRQs 9) *0, disabled. |
| [ 0.550666] ACPI: PCI Interrupt Link [INTG] (IRQs 3 4 5 7 10 11 12 15) *0, disabled. |
| [ 0.551039] ACPI: PCI Interrupt Link [INTH] (IRQs 3 4 5 7 10 11 12 15) *0, disabled. |
| [ 0.552059] pci 0000:00:01.0: vgaarb: setting as boot VGA device |
| [ 0.552059] pci 0000:00:01.0: vgaarb: VGA device added: decodes=io+mem,owns=io+mem,locks=none |
| [ 0.552073] pci 0000:00:01.0: vgaarb: bridge control possible |
| [ 0.552076] vgaarb: loaded |
| [ 0.552324] SCSI subsystem initialized |
| [ 0.552431] libata version 3.00 loaded. |
| [ 0.552431] ACPI: bus type USB registered |
| [ 0.552431] usbcore: registered new interface driver usbfs |
| [ 0.552431] usbcore: registered new interface driver hub |
| [ 0.553022] usbcore: registered new device driver usb |
| [ 0.553063] PCI: Using ACPI for IRQ routing |
| [ 0.553067] PCI: pci_cache_line_size set to 64 bytes |
| [ 0.553226] e820: reserve RAM buffer [mem 0xc7d48000-0xc7ffffff] |
| [ 0.553230] e820: reserve RAM buffer [mem 0x11f000000-0x11fffffff] |
| [ 0.553445] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0 |
| [ 0.553445] hpet0: 3 comparators, 32-bit 14.318180 MHz counter |
| [ 0.556087] clocksource: Switched to clocksource tsc-early |
| [ 0.586937] VFS: Disk quotas dquot_6.6.0 |
| [ 0.586976] VFS: Dquot-cache hash table entries: 1024 (order 0, 4096 bytes) |
| [ 0.587054] *** VALIDATE hugetlbfs *** |
| [ 0.587134] pnp: PnP ACPI init |
| [ 0.587935] pnp 00:00: Plug and Play ACPI device, IDs PNP0b00 (active) |
| [ 0.588037] pnp 00:01: Plug and Play ACPI device, IDs PNP0303 PNP030b (active) |
| [ 0.588121] pnp 00:02: Plug and Play ACPI device, IDs PNP0f13 (active) |
| [ 0.588714] pnp 00:03: Plug and Play ACPI device, IDs PNP0303 PNP030b (active) |
| [ 0.588790] pnp 00:04: Plug and Play ACPI device, IDs PNP0f13 (active) |
| [ 0.588820] pnp: PnP ACPI: found 5 devices |
| [ 0.594226] pci 0000:00:14.4: PCI bridge to [bus 01] |
| [ 0.594318] pci 0000:00:15.0: PCI bridge to [bus 02] |
| [ 0.594334] pci 0000:00:15.1: PCI bridge to [bus 03] |
| [ 0.594340] pci 0000:00:15.1: bridge window [io 0x1000-0x1fff] |
| [ 0.594350] pci 0000:00:15.1: bridge window [mem 0xf0000000-0xf00fffff 64bit pref] |
| [ 0.594363] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7 window] |
| [ 0.594366] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff window] |
| [ 0.594370] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff] |
| [ 0.594373] pci_bus 0000:00: resource 7 [mem 0xe0000000-0xffffffff] |
| [ 0.594376] pci_bus 0000:01: resource 4 [io 0x0000-0x0cf7 window] |
| [ 0.594379] pci_bus 0000:01: resource 5 [io 0x0d00-0xffff window] |
| [ 0.594382] pci_bus 0000:01: resource 6 [mem 0x000a0000-0x000bffff] |
| [ 0.594385] pci_bus 0000:01: resource 7 [mem 0xe0000000-0xffffffff] |
| [ 0.594388] pci_bus 0000:03: resource 0 [io 0x1000-0x1fff] |
| [ 0.594391] pci_bus 0000:03: resource 2 [mem 0xf0000000-0xf00fffff 64bit pref] |
| [ 0.594585] NET: Registered protocol family 2 |
| [ 0.594919] tcp_listen_portaddr_hash hash table entries: 512 (order: 0, 6144 bytes) |
| [ 0.594930] TCP established hash table entries: 8192 (order: 3, 32768 bytes) |
| [ 0.594959] TCP bind hash table entries: 8192 (order: 4, 65536 bytes) |
| [ 0.594996] TCP: Hash tables configured (established 8192 bind 8192) |
| [ 0.595060] UDP hash table entries: 512 (order: 2, 16384 bytes) |
| [ 0.595074] UDP-Lite hash table entries: 512 (order: 2, 16384 bytes) |
| [ 0.595178] NET: Registered protocol family 1 |
| [ 0.595219] pci 0000:00:01.0: Video device with shadowed ROM at [mem 0x000c0000-0x000dffff] |
| [ 0.598291] PCI: CLS 64 bytes, default 64 |
| [ 0.598410] PCI-DMA: Using software bounce buffering for IO (SWIOTLB) |
| [ 0.598414] software IO TLB: mapped [mem 0x2f9fd000-0x339fd000] (64MB) |
| [ 0.598694] LVT offset 0 assigned for vector 0x400 |
| [ 0.598757] perf: AMD IBS detected (0x000000ff) |
| [ 0.599359] check: Scanning for low memory corruption every 5 seconds |
| [ 0.600609] Initialise system trusted keyrings |
| [ 0.600764] workingset: timestamp_bits=14 max_order=20 bucket_order=6 |
| [ 0.604179] zbud: loaded |
| [ 0.605171] NET: Registered protocol family 38 |
| [ 0.605185] Key type asymmetric registered |
| [ 0.605188] Asymmetric key parser 'x509' registered |
| [ 0.605218] bounce: pool size: 64 pages |
| [ 0.605241] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 251) |
| [ 0.605393] io scheduler mq-deadline registered |
| [ 0.605396] io scheduler kyber registered |
| [ 0.606344] pcieport 0000:00:15.0: PME: Signaling with IRQ 24 |
| [ 0.607033] pcieport 0000:00:15.1: PME: Signaling with IRQ 25 |
| [ 0.607296] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input0 |
| [ 0.607333] ACPI: Power Button [PWRB] |
| [ 0.607421] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input1 |
| [ 0.607444] ACPI: Power Button [PWRF] |
| [ 0.608989] thermal LNXTHERM:00: registered as thermal_zone0 |
| [ 0.608993] ACPI: Thermal Zone [TZ00] (41 C) |
| [ 0.609220] initcall serial8250_init blacklisted |
| [ 0.610008] Non-volatile memory driver v1.3 |
| [ 0.610143] Linux agpgart interface v0.103 |
| [ 0.610862] [drm] radeon kernel modesetting enabled. |
| [ 0.610898] radeon 0000:00:01.0: remove_conflicting_pci_framebuffers: bar 0: 0xe0000000 -> 0xefffffff |
| [ 0.610901] radeon 0000:00:01.0: remove_conflicting_pci_framebuffers: bar 2: 0xf0100000 -> 0xf013ffff |
| [ 0.610905] radeon 0000:00:01.0: vgaarb: deactivate vga console |
| [ 0.611774] Console: switching to colour dummy device 80x25 |
| [ 0.612540] [drm] initializing kernel modesetting (PALM 0x1002:0x9802 0x1002:0x9802 0x00). |
| [ 0.612614] ATOM BIOS: AMD |
| [ 0.612687] radeon 0000:00:01.0: VRAM: 384M 0x0000000000000000 - 0x0000000017FFFFFF (384M used) |
| [ 0.612691] radeon 0000:00:01.0: GTT: 1024M 0x0000000018000000 - 0x0000000057FFFFFF |
| [ 0.612699] [drm] Detected VRAM RAM=384M, BAR=256M |
| [ 0.612700] [drm] RAM width 32bits DDR |
| [ 0.612866] [TTM] Zone kernel: Available graphics memory: 385326 KiB |
| [ 0.612868] [TTM] Zone highmem: Available graphics memory: 1822658 KiB |
| [ 0.612869] [TTM] Initializing pool allocator |
| [ 0.612878] [TTM] Initializing DMA pool allocator |
| [ 0.612916] [drm] radeon: 384M of VRAM memory ready |
| [ 0.612918] [drm] radeon: 1024M of GTT memory ready. |
| [ 0.612946] [drm] Loading PALM Microcode |
| [ 0.612954] [drm] Internal thermal controller without fan control |
| [ 0.613027] [drm] Found smc ucode version: 0x00010601 |
| [ 0.613097] [drm] radeon: dpm initialized |
| [ 0.613129] [drm] GART: num cpu pages 262144, num gpu pages 262144 |
| [ 0.631274] [drm] GART: Restore entries: num cpu pages 262144, num gpu pages 262144 |
| [ 0.636399] [drm] GART: Done restoring entries |
| [ 0.636409] [drm] PCIE GART of 1024M enabled (table at 0x0000000000162000). |
| [ 0.636597] radeon 0000:00:01.0: WB enabled |
| [ 0.636606] radeon 0000:00:01.0: fence driver on ring 0 use gpu addr 0x0000000018000c00 and cpu addr 0x(ptrval) |
| [ 0.636610] radeon 0000:00:01.0: fence driver on ring 3 use gpu addr 0x0000000018000c0c and cpu addr 0x(ptrval) |
| [ 0.637493] radeon 0000:00:01.0: fence driver on ring 5 use gpu addr 0x0000000000072118 and cpu addr 0x(ptrval) |
| [ 0.637498] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013). |
| [ 0.637499] [drm] Driver supports precise vblank timestamp query. |
| [ 0.637502] radeon 0000:00:01.0: radeon: MSI limited to 32-bit |
| [ 0.637616] radeon 0000:00:01.0: radeon: using MSI. |
| [ 0.637656] [drm] radeon: irq initialized. |
| [ 0.654273] [drm] ring test on 0 succeeded in 1 usecs |
| [ 0.654282] [drm] ring test on 3 succeeded in 3 usecs |
| [ 0.668344] [drm] ring test on 5 succeeded in 1 usecs |
| [ 0.670363] [drm] UVD initialized successfully. |
| [ 0.670610] [drm] ib test on ring 0 succeeded in 0 usecs |
| [ 0.670666] [drm] ib test on ring 3 succeeded in 0 usecs |
| [ 0.682864] [drm] ib test on ring 5 succeeded |
| [ 0.685530] [drm] Radeon Display Connectors |
| [ 0.685532] [drm] Connector 0: |
| [ 0.685533] [drm] HDMI-A-1 |
| [ 0.685534] [drm] HPD1 |
| [ 0.685537] [drm] DDC: 0x6430 0x6430 0x6434 0x6434 0x6438 0x6438 0x643c 0x643c |
| [ 0.685538] [drm] Encoders: |
| [ 0.685540] [drm] DFP1: INTERNAL_UNIPHY |
| [ 0.685542] [drm] Connector 1: |
| [ 0.685543] [drm] HDMI-A-2 |
| [ 0.685544] [drm] HPD2 |
| [ 0.685547] [drm] DDC: 0x6440 0x6440 0x6444 0x6444 0x6448 0x6448 0x644c 0x644c |
| [ 0.685548] [drm] Encoders: |
| [ 0.685549] [drm] DFP2: INTERNAL_UNIPHY |
| [ 0.685550] [drm] Connector 2: |
| [ 0.685551] [drm] VGA-1 |
| [ 0.685554] [drm] DDC: 0x64d8 0x64d8 0x64dc 0x64dc 0x64e0 0x64e0 0x64e4 0x64e4 |
| [ 0.685554] [drm] Encoders: |
| [ 0.685556] [drm] CRT1: INTERNAL_KLDSCP_DAC1 |
| [ 0.726716] [drm] fb mappable at 0xE0366000 |
| [ 0.726720] [drm] vram apper at 0xE0000000 |
| [ 0.726722] [drm] size 5242880 |
| [ 0.726723] [drm] fb depth is 24 |
| [ 0.726724] [drm] pitch is 5120 |
| [ 0.726998] fbcon: radeondrmfb (fb0) is primary device |
| [ 0.748403] Console: switching to colour frame buffer device 160x64 |
| [ 0.759246] radeon 0000:00:01.0: fb0: radeondrmfb frame buffer device |
| [ 0.759379] [drm] Initialized radeon 2.50.0 20080528 for 0000:00:01.0 on minor 0 |
| [ 0.760092] ahci 0000:00:11.0: version 3.0 |
| [ 0.760832] ahci 0000:00:11.0: AHCI 0001.0200 32 slots 6 ports 6 Gbps 0x3f impl SATA mode |
| [ 0.760838] ahci 0000:00:11.0: flags: 64bit ncq sntf ilck led clo pmp pio slum part |
| [ 0.763271] scsi host0: ahci |
| [ 0.763931] scsi host1: ahci |
| [ 0.764646] scsi host2: ahci |
| [ 0.765137] scsi host3: ahci |
| [ 0.765767] scsi host4: ahci |
| [ 0.766313] scsi host5: ahci |
| [ 0.766601] ata1: SATA max UDMA/133 abar m1024@0xf014b000 port 0xf014b100 irq 19 |
| [ 0.766605] ata2: SATA max UDMA/133 abar m1024@0xf014b000 port 0xf014b180 irq 19 |
| [ 0.766609] ata3: SATA max UDMA/133 abar m1024@0xf014b000 port 0xf014b200 irq 19 |
| [ 0.766612] ata4: SATA max UDMA/133 abar m1024@0xf014b000 port 0xf014b280 irq 19 |
| [ 0.766615] ata5: SATA max UDMA/133 abar m1024@0xf014b000 port 0xf014b300 irq 19 |
| [ 0.766619] ata6: SATA max UDMA/133 abar m1024@0xf014b000 port 0xf014b380 irq 19 |
| [ 0.766882] libphy: Fixed MDIO Bus: probed |
| [ 0.766957] usbcore: registered new interface driver usbserial_generic |
| [ 0.766969] usbserial: USB Serial support registered for generic |
| [ 0.767059] i8042: PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at 0x60,0x64 irq 1,12 |
| [ 0.769384] ata2: SATA link down (SStatus 0 SControl 0) |
| [ 0.770911] serio: i8042 KBD port at 0x60,0x64 irq 1 |
| [ 0.770926] serio: i8042 AUX port at 0x60,0x64 irq 12 |
| [ 0.771339] mousedev: PS/2 mouse device common for all mice |
| [ 0.771342] ata3: SATA link down (SStatus 0 SControl 0) |
| [ 0.771649] ata4: SATA link down (SStatus 0 SControl 0) |
| [ 0.771709] ata6: SATA link down (SStatus 0 SControl 0) |
| [ 0.771746] ata5: SATA link down (SStatus 0 SControl 0) |
| [ 0.771773] ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 0) |
| [ 0.772142] ata1.00: ATA-9: SanDisk SDSSDP064G, 2.0.0, max UDMA/133 |
| [ 0.772147] ata1.00: 125045424 sectors, multi 1: LBA48 NCQ (depth 32) |
| [ 0.772229] rtc_cmos 00:00: RTC can wake from S4 |
| [ 0.772544] ata1.00: configured for UDMA/133 |
| [ 0.772955] rtc_cmos 00:00: registered as rtc0 |
| [ 0.773019] rtc_cmos 00:00: alarms up to one day, 114 bytes nvram, hpet irqs |
| [ 0.773112] scsi 0:0:0:0: Direct-Access ATA SanDisk SDSSDP06 0 PQ: 0 ANSI: 5 |
| [ 0.773153] w83627ehf: Found NCT6775F chip at 0x290 |
| [ 0.773576] sd 0:0:0:0: Attached scsi generic sg0 type 0 |
| [ 0.773766] w83627ehf w83627ehf.656: hwmon_device_register() is deprecated. Please convert the driver to use hwmon_device_register_with_info(). |
| [ 0.773889] device-mapper: uevent: version 1.0.3 |
| [ 0.773948] sd 0:0:0:0: [sda] 125045424 512-byte logical blocks: (64.0 GB/59.6 GiB) |
| [ 0.773981] sd 0:0:0:0: [sda] Write Protect is off |
| [ 0.773985] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 |
| [ 0.774053] device-mapper: ioctl: 4.40.0-ioctl (2019-01-18) initialised: dm-devel@redhat.com |
| [ 0.774086] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA |
| [ 0.774220] hidraw: raw HID events driver (C) Jiri Kosina |
| [ 0.774335] usbcore: registered new interface driver usbhid |
| [ 0.774336] usbhid: USB HID core driver |
| [ 0.774739] Initializing XFRM netlink socket |
| [ 0.775041] NET: Registered protocol family 10 |
| [ 0.775456] sda: sda1 |
| [ 0.775869] Segment Routing with IPv6 |
| [ 0.775909] mip6: Mobile IPv6 |
| [ 0.775915] NET: Registered protocol family 17 |
| [ 0.776614] sd 0:0:0:0: [sda] Attached SCSI disk |
| [ 0.776723] mce: Using 6 MCE banks |
| [ 0.776765] Using IPI No-Shortcut mode |
| [ 0.776787] sched_clock: Marking stable (773095880, 3340054)->(880645607, -104209673) |
| [ 0.777694] registered taskstats version 1 |
| [ 0.777700] Loading compiled-in X.509 certificates |
| [ 0.777754] zswap: loaded using pool lzo/zbud |
| [ 0.778474] PM: Magic number: 3:198:974 |
| [ 0.778723] rtc_cmos 00:00: setting system clock to 2019-05-15T06:57:17 UTC (1557903437) |
| [ 0.799615] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input2 |
| [ 0.865043] EXT4-fs (sda1): mounted filesystem with ordered data mode. Opts: (null) |
| [ 0.865087] VFS: Mounted root (ext4 filesystem) on device 8:1. |
| [ 0.866469] random: 1 |
| [ 0.866474] random: 2 |
| [ 0.866477] random: 3 |
| [ 0.866478] random: 4 |
| [ 0.866482] random: fast init done |
| [ 0.867399] devtmpfs: mounted |
| [ 0.867435] After kernel_init_freeable |
| [ 0.869548] Freeing unused kernel image memory: 1144K |
| [ 0.872953] Write protecting kernel text and read-only data: 11896k |
| [ 0.872955] NX-protecting the kernel data: 5376k |
| [ 0.873627] x86/mm: Checked W+X mappings: passed, no W+X pages found. |
| [ 0.873629] After mark_readonly |
| [ 0.873636] After pti_finalize |
| [ 0.873637] rcu_end_inkernel_boot |
| [ 0.873639] Run /sbin/init as init process |
| [ 1.191818] systemd[1]: systemd 241 running in system mode. (+PAM +AUDIT +SELINUX +IMA +APPARMOR +SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ +LZ4 +SECCOMP +BLKID +ELFUTILS +KMOD -IDN2 +IDN -PCRE2 default-hierarchy=hybrid) |
| [ 1.203956] systemd[1]: Detected architecture x86. |
| [ 1.208315] systemd[1]: Set hostname to <kodi>. |
| [ 1.209926] systemd[1]: Failed to bump fs.file-max, ignoring: Invalid argument |
| [ 1.411832] systemd[1]: File /lib/systemd/system/systemd-journald.service:11 configures an IP firewall (IPAddressDeny=any), but the local system does not support BPF/cgroup based firewalling. |
| [ 1.411843] systemd[1]: Proceeding WITHOUT firewalling in effect! (This warning is only shown for the first loaded unit using IP firewalling.) |
| [ 1.633059] tsc: Refined TSC clocksource calibration: 1600.000 MHz |
| [ 1.633103] clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x171024fa93b, max_idle_ns: 440795253189 ns |
| [ 1.633154] clocksource: Switched to clocksource tsc |
| [ 1.641095] random: systemd: uninitialized urandom read (16 bytes read) |
| [ 1.643906] random: systemd: uninitialized urandom read (16 bytes read) |
| [ 1.643955] systemd[1]: Reached target Local File Systems. |
| [ 1.644195] random: systemd: uninitialized urandom read (16 bytes read) |
| [ 1.644362] systemd[1]: Listening on initctl Compatibility Named Pipe. |
| [ 1.644503] systemd[1]: Started Forward Password Requests to Wall Directory Watch. |
| [ 1.644927] systemd[1]: Listening on Network Service Netlink Socket. |
| [ 2.290744] acpi_cpufreq: overriding BIOS provided _PSD data |
| [ 2.611069] 1 |
| [ 2.611095] 2 |
| [ 2.611411] 3 |
| [ 2.611412] 4 |
| [ 2.611413] 5 |
| [ 2.611414] 7 |
| [ 2.611423] 8 |
| [ 2.611423] 9 |
| [ 2.612673] 1 |
| [ 2.612705] 2 |
| [ 2.613177] 3 |
| [ 2.613179] 4 |
| [ 2.613179] 5 |
| [ 2.613180] 7 |
| [ 2.613186] 8 |
| [ 2.613187] 9 |
| [ 2.652764] input: HD-Audio Generic HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:01.1/sound/card0/input5 |
| [ 2.662206] snd_hda_codec_realtek hdaudioC1D0: ALC892: SKU not ready 0x00000100 |
| [ 2.662784] snd_hda_codec_realtek hdaudioC1D0: autoconfig for ALC892: line_outs=4 (0x14/0x16/0x15/0x17/0x0) type:line |
| [ 2.662788] snd_hda_codec_realtek hdaudioC1D0: speaker_outs=0 (0x0/0x0/0x0/0x0/0x0) |
| [ 2.662797] snd_hda_codec_realtek hdaudioC1D0: hp_outs=1 (0x1b/0x0/0x0/0x0/0x0) |
| [ 2.662800] snd_hda_codec_realtek hdaudioC1D0: mono: mono_out=0x0 |
| [ 2.662802] snd_hda_codec_realtek hdaudioC1D0: dig-out=0x1e/0x0 |
| [ 2.662805] snd_hda_codec_realtek hdaudioC1D0: inputs: |
| [ 2.662809] snd_hda_codec_realtek hdaudioC1D0: Rear Mic=0x18 |
| [ 2.662812] snd_hda_codec_realtek hdaudioC1D0: Front Mic=0x19 |
| [ 2.662815] snd_hda_codec_realtek hdaudioC1D0: Line=0x1a |
| [ 2.662818] snd_hda_codec_realtek hdaudioC1D0: CD=0x1c |
| [ 2.693316] input: HDA ATI SB Rear Mic as /devices/pci0000:00/0000:00:14.2/sound/card1/input6 |
| [ 2.693453] input: HDA ATI SB Front Mic as /devices/pci0000:00/0000:00:14.2/sound/card1/input7 |
| [ 2.693574] input: HDA ATI SB Line as /devices/pci0000:00/0000:00:14.2/sound/card1/input8 |
| [ 2.693694] input: HDA ATI SB Line Out Front as /devices/pci0000:00/0000:00:14.2/sound/card1/input9 |
| [ 2.693814] input: HDA ATI SB Line Out Surround as /devices/pci0000:00/0000:00:14.2/sound/card1/input10 |
| [ 2.693937] input: HDA ATI SB Line Out CLFE as /devices/pci0000:00/0000:00:14.2/sound/card1/input11 |
| [ 2.694098] input: HDA ATI SB Line Out Side as /devices/pci0000:00/0000:00:14.2/sound/card1/input12 |
| [ 2.694237] input: HDA ATI SB Front Headphone as /devices/pci0000:00/0000:00:14.2/sound/card1/input13 |
| [ 2.714305] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver |
| [ 2.727297] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver |
| [ 2.728716] ehci-pci: EHCI PCI platform driver |
| [ 2.729207] QUIRK: Enable AMD PLL fix |
| [ 2.729327] ehci-pci 0000:00:12.2: EHCI Host Controller |
| [ 2.729343] ehci-pci 0000:00:12.2: new USB bus registered, assigned bus number 1 |
| [ 2.729355] ehci-pci 0000:00:12.2: applying AMD SB700/SB800/Hudson-2/3 EHCI dummy qh workaround |
| [ 2.729439] ehci-pci 0000:00:12.2: debug port 1 |
| [ 2.729540] ehci-pci 0000:00:12.2: irq 17, io mem 0xf014c000 |
| [ 2.736085] ehci-pci 0000:00:12.2: USB 2.0 started, EHCI 1.00 |
| [ 2.736323] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 5.01 |
| [ 2.736328] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 |
| [ 2.736332] usb usb1: Product: EHCI Host Controller |
| [ 2.736335] usb usb1: Manufacturer: Linux 5.1.0-10917-g2d90c97dd27e ehci_hcd |
| [ 2.736338] usb usb1: SerialNumber: 0000:00:12.2 |
| [ 2.736976] hub 1-0:1.0: USB hub found |
| [ 2.740079] hub 1-0:1.0: 5 ports detected |
| [ 2.740930] ehci-pci 0000:00:13.2: EHCI Host Controller |
| [ 2.740946] ehci-pci 0000:00:13.2: new USB bus registered, assigned bus number 2 |
| [ 2.740957] ehci-pci 0000:00:13.2: applying AMD SB700/SB800/Hudson-2/3 EHCI dummy qh workaround |
| [ 2.741053] ehci-pci 0000:00:13.2: debug port 1 |
| [ 2.741114] ehci-pci 0000:00:13.2: irq 17, io mem 0xf014d000 |
| [ 2.748141] ehci-pci 0000:00:13.2: USB 2.0 started, EHCI 1.00 |
| [ 2.748324] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 5.01 |
| [ 2.748328] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1 |
| [ 2.748331] usb usb2: Product: EHCI Host Controller |
| [ 2.748334] usb usb2: Manufacturer: Linux 5.1.0-10917-g2d90c97dd27e ehci_hcd |
| [ 2.748337] usb usb2: SerialNumber: 0000:00:13.2 |
| [ 2.748658] hub 2-0:1.0: USB hub found |
| [ 2.748682] hub 2-0:1.0: 5 ports detected |
| [ 2.750497] ohci-pci: OHCI PCI platform driver |
| [ 2.751143] ohci-pci 0000:00:12.0: OHCI PCI host controller |
| [ 2.751163] ohci-pci 0000:00:12.0: new USB bus registered, assigned bus number 3 |
| [ 2.751333] ohci-pci 0000:00:12.0: irq 18, io mem 0xf0148000 |
| [ 2.752131] ohci-pci 0000:00:13.0: OHCI PCI host controller |
| [ 2.752135] ohci-pci 0000:00:14.5: OHCI PCI host controller |
| [ 2.752158] ohci-pci 0000:00:13.0: new USB bus registered, assigned bus number 4 |
| [ 2.752161] ohci-pci 0000:00:14.5: new USB bus registered, assigned bus number 5 |
| [ 2.752229] ohci-pci 0000:00:14.5: irq 18, io mem 0xf014a000 |
| [ 2.752236] ohci-pci 0000:00:13.0: irq 18, io mem 0xf0149000 |
| [ 2.808302] usb usb5: New USB device found, idVendor=1d6b, idProduct=0001, bcdDevice= 5.01 |
| [ 2.808309] usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1 |
| [ 2.808312] usb usb5: Product: OHCI PCI host controller |
| [ 2.808315] usb usb5: Manufacturer: Linux 5.1.0-10917-g2d90c97dd27e ohci_hcd |
| [ 2.808318] usb usb5: SerialNumber: 0000:00:14.5 |
| [ 2.808651] hub 5-0:1.0: USB hub found |
| [ 2.808741] hub 5-0:1.0: 2 ports detected |
| [ 2.814555] usb usb4: New USB device found, idVendor=1d6b, idProduct=0001, bcdDevice= 5.01 |
| [ 2.814562] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1 |
| [ 2.814566] usb usb4: Product: OHCI PCI host controller |
| [ 2.814569] usb usb4: Manufacturer: Linux 5.1.0-10917-g2d90c97dd27e ohci_hcd |
| [ 2.814572] usb usb4: SerialNumber: 0000:00:13.0 |
| [ 2.814909] hub 4-0:1.0: USB hub found |
| [ 2.814932] hub 4-0:1.0: 5 ports detected |
| [ 2.820048] usb usb3: New USB device found, idVendor=1d6b, idProduct=0001, bcdDevice= 5.01 |
| [ 2.820054] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1 |
| [ 2.820058] usb usb3: Product: OHCI PCI host controller |
| [ 2.820061] usb usb3: Manufacturer: Linux 5.1.0-10917-g2d90c97dd27e ohci_hcd |
| [ 2.820063] usb usb3: SerialNumber: 0000:00:12.0 |
| [ 2.820334] hub 3-0:1.0: USB hub found |
| [ 2.820409] hub 3-0:1.0: 5 ports detected |
| [ 3.224054] usb 3-2: new low-speed USB device number 2 using ohci-pci |
| [ 3.259727] piix4_smbus 0000:00:14.0: SMBus Host Controller at 0xb00, revision 0 |
| [ 3.259743] piix4_smbus 0000:00:14.0: Using register 0x2c for SMBus port selection |
| [ 3.259998] piix4_smbus 0000:00:14.0: Auxiliary SMBus Host Controller at 0x8060 |
| [ 3.364589] libphy: r8169: probed |
| [ 3.365896] r8169 0000:03:00.0 eth0: RTL8168e/8111e, bc:5f:f4:c8:d3:98, XID 2c2, IRQ 28 |
| [ 3.365902] r8169 0000:03:00.0 eth0: jumbo features [frames: 9200 bytes, tx checksumming: ko] |
| [ 3.395183] usb 3-2: New USB device found, idVendor=1241, idProduct=1122, bcdDevice= 1.00 |
| [ 3.395190] usb 3-2: New USB device strings: Mfr=0, Product=0, SerialNumber=0 |
| [ 3.419411] input: HID 1241:1122 as /devices/pci0000:00/0000:00:12.0/usb3/3-2/3-2:1.0/0003:1241:1122.0001/input/input14 |
| [ 3.419663] hid-generic 0003:1241:1122.0001: input,hidraw0: USB HID v1.00 Mouse [HID 1241:1122] on usb-0000:00:12.0-2/input0 |
| [ 3.860185] random: crng init done |
| [ 3.860192] random: 7 urandom warning(s) missed due to ratelimiting |
| [ 4.496803] r8169 0000:03:00.0 enp3s0: renamed from eth0 |
| [ 4.538629] r8169 0000:03:00.0: Direct firmware load for rtl_nic/rtl8168e-2.fw failed with error -2 |
| [ 4.538642] r8169 0000:03:00.0 enp3s0: unable to load firmware patch rtl_nic/rtl8168e-2.fw (-2) |
| [ 4.539109] RTL8211DN Gigabit Ethernet r8169-300:00: attached PHY driver [RTL8211DN Gigabit Ethernet] (mii_bus:phy_addr=r8169-300:00, irq=IGNORE) |
| [ 4.632135] A link change request failed with some changes committed already. Interface enp3s0 may have been left with an inconsistent configuration, please check. |
| [ 4.633743] r8169 0000:03:00.0 enp3s0: Link is Down |
| [ 16.979551] r8169 0000:03:00.0 enp3s0: Link is Up - 100Mbps/Full - flow control rx/tx |
| [ 16.979584] IPv6: ADDRCONF(NETDEV_CHANGE): enp3s0: link becomes ready |