| [ 0.000000] Linux version 5.1.0-rc5-00243-ge57333e5121b (root@d8ed945e59fd) (gcc version 8.3.0 (Debian 8.3.0-3)) #28 SMP Fri Apr 19 12:52:18 UTC 2019 |
| [ 0.000000] x86/fpu: x87 FPU will use FXSAVE |
| [ 0.000000] BIOS-provided physical RAM map: |
| [ 0.000000] BIOS-e820: [mem 0x0000000000000000-0x0000000000000fff] type 16 |
| [ 0.000000] BIOS-e820: [mem 0x0000000000001000-0x000000000009ffff] usable |
| [ 0.000000] BIOS-e820: [mem 0x00000000000c0000-0x00000000000fffff] reserved |
| [ 0.000000] BIOS-e820: [mem 0x0000000000100000-0x00000000c7d4bfff] usable |
| [ 0.000000] BIOS-e820: [mem 0x00000000c7d4c000-0x00000000c7ffffff] type 16 |
| [ 0.000000] BIOS-e820: [mem 0x00000000c8000000-0x00000000dfffffff] reserved |
| [ 0.000000] BIOS-e820: [mem 0x00000000f8000000-0x00000000fbffffff] reserved |
| [ 0.000000] BIOS-e820: [mem 0x0000000100000000-0x000000011effffff] usable |
| [ 0.000000] kmemleak: Kernel memory leak detector disabled |
| [ 0.000000] NX (Execute Disable) protection: active |
| [ 0.000000] SMBIOS 2.7 present. |
| [ 0.000000] DMI: ASROCK E350M1/E350M1, BIOS 4.9-1361-g7f1a0e6b4c 04/22/2019 |
| [ 0.000000] tsc: Fast TSC calibration using PIT |
| [ 0.000000] tsc: Detected 1599.977 MHz processor |
| [ 0.000033] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved |
| [ 0.000038] e820: remove [mem 0x000a0000-0x000fffff] usable |
| [ 0.000048] last_pfn = 0x11f000 max_arch_pfn = 0x1000000 |
| [ 0.000059] MTRR default type: uncachable |
| [ 0.000061] MTRR fixed ranges enabled: |
| [ 0.000064] 00000-9FFFF write-back |
| [ 0.000066] A0000-BFFFF uncachable |
| [ 0.000069] C0000-FFFFF write-back |
| [ 0.000071] MTRR variable ranges enabled: |
| [ 0.000075] 0 base 0FFC00000 mask FFFC00000 write-protect |
| [ 0.000078] 1 base 0C0000000 mask FF8000000 write-back |
| [ 0.000081] 2 base 080000000 mask FC0000000 write-back |
| [ 0.000083] 3 base 000000000 mask F80000000 write-back |
| [ 0.000085] 4 disabled |
| [ 0.000086] 5 disabled |
| [ 0.000088] 6 disabled |
| [ 0.000089] 7 disabled |
| [ 0.000092] TOM2: 000000011f000000 aka 4592M |
| [ 0.000293] x86/PAT: Configuration [0-7]: WB WC UC- UC WB WP UC- WT |
| [ 0.000384] initial memory mapped: [mem 0x00000000-0x1f3fffff] |
| [ 0.000546] BRK [0x1ef05000, 0x1ef05fff] PGTABLE |
| [ 0.000568] BRK [0x1ef06000, 0x1ef06fff] PGTABLE |
| [ 0.000580] ACPI: Early table checksum verification disabled |
| [ 0.000590] ACPI: RSDP 0x00000000000F0800 000024 (v02 COREv4) |
| [ 0.000598] ACPI: XSDT 0x00000000C7D4D0E0 000064 (v01 COREv4 COREBOOT 00000000 CORE 20181213) |
| [ 0.000612] ACPI: FACP 0x00000000C7D4F840 0000F4 (v04 COREv4 COREBOOT 00000000 CORE 20181213) |
| [ 0.000627] ACPI: DSDT 0x00000000C7D4D280 0025B6 (v02 COREv4 COREBOOT 00010001 INTL 20181213) |
| [ 0.000634] ACPI: FACS 0x00000000C7D4D240 000040 |
| [ 0.000640] ACPI: FACS 0x00000000C7D4D240 000040 |
| [ 0.000645] ACPI: SSDT 0x00000000C7D4F940 00008A (v02 COREv4 COREBOOT 0000002A CORE 20181213) |
| [ 0.000652] ACPI: APIC 0x00000000C7D4F9D0 00005C (v02 COREv4 COREBOOT 00000000 CORE 20181213) |
| [ 0.000659] ACPI: HEST 0x00000000C7D4FA30 000028 (v01 COREv4 COREBOOT 00000000 CORE 20181213) |
| [ 0.000665] ACPI: SSDT 0x00000000C7D4FA60 00168E (v02 AMD ALIB 00000001 MSFT 04000000) |
| [ 0.000673] ACPI: SSDT 0x00000000C7D510F0 0003DE (v01 AMD POWERNOW 00000001 AMD 00000001) |
| [ 0.000679] ACPI: VFCT 0x00000000C7D514D0 00E269 (v01 COREv4 COREBOOT 00000000 CORE 20181213) |
| [ 0.000686] ACPI: HPET 0x00000000C7D5F740 000038 (v01 COREv4 COREBOOT 00000000 CORE 20181213) |
| [ 0.000704] ACPI: Local APIC address 0xfee00000 |
| [ 0.000712] 3706MB HIGHMEM available. |
| [ 0.000717] 885MB LOWMEM available. |
| [ 0.000718] mapped low ram: 0 - 375fe000 |
| [ 0.000719] low ram: 0 - 375fe000 |
| [ 0.000732] BRK [0x1ef07000, 0x1ef07fff] PGTABLE |
| [ 0.011399] Zone ranges: |
| [ 0.011404] DMA [mem 0x0000000000001000-0x0000000000ffffff] |
| [ 0.011408] Normal [mem 0x0000000001000000-0x00000000375fdfff] |
| [ 0.011410] HighMem [mem 0x00000000375fe000-0x000000011effffff] |
| [ 0.011413] Movable zone start for each node |
| [ 0.011414] Early memory node ranges |
| [ 0.011416] node 0: [mem 0x0000000000001000-0x000000000009ffff] |
| [ 0.011418] node 0: [mem 0x0000000000100000-0x00000000c7d4bfff] |
| [ 0.011420] node 0: [mem 0x0000000100000000-0x000000011effffff] |
| [ 0.015561] Zeroed struct page in unavailable ranges: 99093 pages |
| [ 0.015566] Initmem setup node 0 [mem 0x0000000000001000-0x000000011effffff] |
| [ 0.015570] On node 0 totalpages: 945387 |
| [ 0.015573] DMA zone: 40 pages used for memmap |
| [ 0.015574] DMA zone: 0 pages reserved |
| [ 0.015576] DMA zone: 3999 pages, LIFO batch:0 |
| [ 0.015772] Normal zone: 2175 pages used for memmap |
| [ 0.015774] Normal zone: 222718 pages, LIFO batch:63 |
| [ 0.026180] HighMem zone: 718670 pages, LIFO batch:63 |
| [ 0.065272] Using APIC driver default |
| [ 0.065552] ACPI: Local APIC address 0xfee00000 |
| [ 0.065577] IOAPIC[0]: apic_id 2, version 33, address 0xfec00000, GSI 0-23 |
| [ 0.065582] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) |
| [ 0.065586] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 low level) |
| [ 0.065590] ACPI: IRQ0 used by override. |
| [ 0.065593] ACPI: IRQ9 used by override. |
| [ 0.065597] Using ACPI (MADT) for SMP configuration information |
| [ 0.065600] ACPI: HPET id: 0x43538210 base: 0xfed00000 |
| [ 0.065613] smpboot: Allowing 2 CPUs, 0 hotplug CPUs |
| [ 0.065640] [mem 0xe0000000-0xf7ffffff] available for PCI devices |
| [ 0.065648] clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 1910969940391419 ns |
| [ 0.065651] After setup_arch |
| [ 0.065652] After add_latent_entropy |
| [ 0.065669] After add_device_randomness |
| [ 0.065679] random: get_random_bytes called from start_kernel+0x9b/0x50e with crng_init=0 |
| [ 0.065684] After boot_init_stack_canary |
| [ 0.065685] After mm_init_cpumask |
| [ 0.065694] After setup_command_line |
| [ 0.065696] After setup_nr_cpu_ids |
| [ 0.065699] setup_percpu: NR_CPUS:2 nr_cpumask_bits:2 nr_cpu_ids:2 nr_node_ids:1 |
| [ 0.065943] percpu: Embedded 30 pages/cpu @(ptrval) s90252 r0 d32628 u122880 |
| [ 0.065956] pcpu-alloc: s90252 r0 d32628 u122880 alloc=30*4096 |
| [ 0.065958] pcpu-alloc: [0] 0 [0] 1 |
| [ 0.065984] After setup_per_cpu_areas |
| [ 0.065986] After smp_perpare_boot_cpu |
| [ 0.065987] After boot_cpu_hotplug_init |
| [ 0.065993] Built 1 zonelists, mobility grouping on. Total pages: 943172 |
| [ 0.065997] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-5.1.0-rc5-00243-ge57333e5121b root=/dev/sda1 rw noisapnp cryptomgr.notests quiet iomem=relaxed apparmor=0 selinux=0 kmemleak=off initcall_blacklist=serial8250_init udev.children_max=2 udev.log_priority=info |
| [ 0.066261] blacklisting initcall serial8250_init |
| [ 0.066618] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes) |
| [ 0.066806] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes) |
| [ 0.066817] Initializing CPU#0 |
| [ 0.101589] Initializing HighMem for node 0 (000375fe:0011f000) |
| [ 0.101592] add_highpages_with_active_regions: start_pfn = 226814, end_pfn = 1175552 |
| [ 0.101597] add_highpages_with_active_regions: for_each_free_mem_range: i = 8589934592, nid = 0, pfn = 226814, e_pfn = 226814, before for loop |
| [ 0.101599] add_highpages_with_active_regions: for_each_free_mem_range: i = 12884901889, nid = 0, pfn = 226814, e_pfn = 226814, before for loop |
| [ 0.101602] add_highpages_with_active_regions: for_each_free_mem_range: i = 17179869185, nid = 0, pfn = 226814, e_pfn = 226814, before for loop |
| [ 0.101604] add_highpages_with_active_regions: for_each_free_mem_range: i = 21474836481, nid = 0, pfn = 226814, e_pfn = 226814, before for loop |
| [ 0.101606] add_highpages_with_active_regions: for_each_free_mem_range: i = 25769803777, nid = 0, pfn = 226814, e_pfn = 226814, before for loop |
| [ 0.101609] add_highpages_with_active_regions: for_each_free_mem_range: i = 30064771073, nid = 0, pfn = 226814, e_pfn = 226814, before for loop |
| [ 0.101611] add_highpages_with_active_regions: for_each_free_mem_range: i = 34359738369, nid = 0, pfn = 226814, e_pfn = 226814, before for loop |
| [ 0.101613] add_highpages_with_active_regions: for_each_free_mem_range: i = 38654705665, nid = 0, pfn = 226814, e_pfn = 226814, before for loop |
| [ 0.101616] add_highpages_with_active_regions: for_each_free_mem_range: i = 42949672961, nid = 0, pfn = 226814, e_pfn = 226814, before for loop |
| [ 0.101618] add_highpages_with_active_regions: for_each_free_mem_range: i = 47244640257, nid = 0, pfn = 226814, e_pfn = 226814, before for loop |
| [ 0.101620] add_highpages_with_active_regions: for_each_free_mem_range: i = 51539607553, nid = 0, pfn = 226814, e_pfn = 226814, before for loop |
| [ 0.101622] add_highpages_with_active_regions: for_each_free_mem_range: i = 55834574849, nid = 0, pfn = 226814, e_pfn = 226814, before for loop |
| [ 0.101625] add_highpages_with_active_regions: for_each_free_mem_range: i = 60129542145, nid = 0, pfn = 226814, e_pfn = 226814, before for loop |
| [ 0.101627] add_highpages_with_active_regions: for_each_free_mem_range: i = 64424509441, nid = 0, pfn = 226814, e_pfn = 226814, before for loop |
| [ 0.101629] add_highpages_with_active_regions: for_each_free_mem_range: i = 68719476737, nid = 0, pfn = 226814, e_pfn = 226814, before for loop |
| [ 0.101632] add_highpages_with_active_regions: for_each_free_mem_range: i = 73014444033, nid = 0, pfn = 226814, e_pfn = 226814, before for loop |
| [ 0.101634] add_highpages_with_active_regions: for_each_free_mem_range: i = 77309411329, nid = 0, pfn = 226814, e_pfn = 226814, before for loop |
| [ 0.101636] add_highpages_with_active_regions: for_each_free_mem_range: i = 81604378625, nid = 0, pfn = 226814, e_pfn = 226814, before for loop |
| [ 0.101638] add_highpages_with_active_regions: for_each_free_mem_range: i = 85899345921, nid = 0, pfn = 226814, e_pfn = 226814, before for loop |
| [ 0.101641] add_highpages_with_active_regions: for_each_free_mem_range: i = 90194313217, nid = 0, pfn = 226814, e_pfn = 226814, before for loop |
| [ 0.101643] add_highpages_with_active_regions: for_each_free_mem_range: i = 90194313218, nid = 0, pfn = 226814, e_pfn = 818508, before for loop |
| [ 0.291889] add_highpages_with_active_regions: for_each_free_mem_range: i = 90194313219, nid = 0, pfn = 1048576, e_pfn = 1175552, before for loop |
| [ 0.332803] Initializing Movable for node 0 (00000000:00000000) |
| [ 0.332806] add_highpages_with_active_regions: start_pfn = 0, end_pfn = 0 |
| [ 0.332809] add_highpages_with_active_regions: for_each_free_mem_range: i = 8589934592, nid = 0, pfn = 0, e_pfn = 0, before for loop |
| [ 0.332812] add_highpages_with_active_regions: for_each_free_mem_range: i = 12884901889, nid = 0, pfn = 0, e_pfn = 0, before for loop |
| [ 0.332815] add_highpages_with_active_regions: for_each_free_mem_range: i = 17179869185, nid = 0, pfn = 0, e_pfn = 0, before for loop |
| [ 0.332817] add_highpages_with_active_regions: for_each_free_mem_range: i = 21474836481, nid = 0, pfn = 0, e_pfn = 0, before for loop |
| [ 0.332819] add_highpages_with_active_regions: for_each_free_mem_range: i = 25769803777, nid = 0, pfn = 0, e_pfn = 0, before for loop |
| [ 0.332821] add_highpages_with_active_regions: for_each_free_mem_range: i = 30064771073, nid = 0, pfn = 0, e_pfn = 0, before for loop |
| [ 0.332823] add_highpages_with_active_regions: for_each_free_mem_range: i = 34359738369, nid = 0, pfn = 0, e_pfn = 0, before for loop |
| [ 0.332826] add_highpages_with_active_regions: for_each_free_mem_range: i = 38654705665, nid = 0, pfn = 0, e_pfn = 0, before for loop |
| [ 0.332828] add_highpages_with_active_regions: for_each_free_mem_range: i = 42949672961, nid = 0, pfn = 0, e_pfn = 0, before for loop |
| [ 0.332830] add_highpages_with_active_regions: for_each_free_mem_range: i = 47244640257, nid = 0, pfn = 0, e_pfn = 0, before for loop |
| [ 0.332832] add_highpages_with_active_regions: for_each_free_mem_range: i = 51539607553, nid = 0, pfn = 0, e_pfn = 0, before for loop |
| [ 0.332835] add_highpages_with_active_regions: for_each_free_mem_range: i = 55834574849, nid = 0, pfn = 0, e_pfn = 0, before for loop |
| [ 0.332837] add_highpages_with_active_regions: for_each_free_mem_range: i = 60129542145, nid = 0, pfn = 0, e_pfn = 0, before for loop |
| [ 0.332839] add_highpages_with_active_regions: for_each_free_mem_range: i = 64424509441, nid = 0, pfn = 0, e_pfn = 0, before for loop |
| [ 0.332841] add_highpages_with_active_regions: for_each_free_mem_range: i = 68719476737, nid = 0, pfn = 0, e_pfn = 0, before for loop |
| [ 0.332843] add_highpages_with_active_regions: for_each_free_mem_range: i = 73014444033, nid = 0, pfn = 0, e_pfn = 0, before for loop |
| [ 0.332846] add_highpages_with_active_regions: for_each_free_mem_range: i = 77309411329, nid = 0, pfn = 0, e_pfn = 0, before for loop |
| [ 0.332848] add_highpages_with_active_regions: for_each_free_mem_range: i = 81604378625, nid = 0, pfn = 0, e_pfn = 0, before for loop |
| [ 0.332850] add_highpages_with_active_regions: for_each_free_mem_range: i = 85899345921, nid = 0, pfn = 0, e_pfn = 0, before for loop |
| [ 0.332852] add_highpages_with_active_regions: for_each_free_mem_range: i = 90194313217, nid = 0, pfn = 0, e_pfn = 0, before for loop |
| [ 0.332855] add_highpages_with_active_regions: for_each_free_mem_range: i = 90194313218, nid = 0, pfn = 0, e_pfn = 0, before for loop |
| [ 0.332857] add_highpages_with_active_regions: for_each_free_mem_range: i = 90194313219, nid = 0, pfn = 0, e_pfn = 0, before for loop |
| [ 0.339086] Memory: 3645868K/3781548K available (8867K kernel code, 750K rwdata, 2856K rodata, 1128K init, 640K bss, 135680K reserved, 0K cma-reserved, 2874680K highmem) |
| [ 0.339097] virtual kernel memory layout: |
| fixmap : 0xfff8f000 - 0xfffff000 ( 448 kB) |
| cpu_entry : 0xffa00000 - 0xffa4d000 ( 308 kB) |
| pkmap : 0xff600000 - 0xff800000 (2048 kB) |
| vmalloc : 0xf7dfe000 - 0xff5fe000 ( 120 MB) |
| lowmem : 0xc0000000 - 0xf75fe000 ( 885 MB) |
| .init : 0xdec48000 - 0xded62000 (1128 kB) |
| .data : 0xde8a8d08 - 0xdec358c0 (3634 kB) |
| .text : 0xde000000 - 0xde8a8d08 (8867 kB) |
| [ 0.339098] Checking if this processor honours the WP bit even in supervisor mode...Ok. |
| [ 0.339565] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=2, Nodes=1 |
| [ 0.339569] After mm_init |
| [ 0.339571] ftrace: allocating 33926 entries in 67 pages |
| [ 0.366474] After sched_init |
| [ 0.366540] rcu: Hierarchical RCU implementation. |
| [ 0.366542] rcu: RCU event tracing is enabled. |
| [ 0.366546] rcu: RCU calculated value of scheduler-enlistment delay is 100 jiffies. |
| [ 0.366559] After rcu_init |
| [ 0.373649] NR_IRQS: 2304, nr_irqs: 440, preallocated irqs: 16 |
| [ 0.374249] CPU 0 irqstacks, hard=(ptrval) soft=(ptrval) |
| [ 0.374648] Console: colour dummy device 80x25 |
| [ 0.374660] printk: console [tty0] enabled |
| [ 0.374717] ACPI: Core revision 20190215 |
| [ 0.375343] clocksource: hpet: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 133484873504 ns |
| [ 0.375365] hpet clockevent registered |
| [ 0.375374] APIC: Switch to symmetric I/O mode setup |
| [ 0.375377] Enabling APIC mode: Flat. Using 1 I/O APICs |
| [ 0.376007] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=0 pin2=0 |
| [ 0.380446] clocksource: tsc-early: mask: 0xffffffffffffffff max_cycles: 0x17100f29a7e, max_idle_ns: 440795219998 ns |
| [ 0.380466] Calibrating delay loop (skipped), value calculated using timer frequency.. 3199.95 BogoMIPS (lpj=1599977) |
| [ 0.380472] pid_max: default: 32768 minimum: 301 |
| [ 0.380572] LSM: Security Framework initializing |
| [ 0.380616] Mount-cache hash table entries: 2048 (order: 1, 8192 bytes) |
| [ 0.380623] Mountpoint-cache hash table entries: 2048 (order: 1, 8192 bytes) |
| [ 0.380967] *** VALIDATE proc *** |
| [ 0.381077] *** VALIDATE cgroup1 *** |
| [ 0.381080] *** VALIDATE cgroup2 *** |
| [ 0.381119] mce: CPU supports 6 MCE banks |
| [ 0.381150] Last level iTLB entries: 4KB 512, 2MB 8, 4MB 4 |
| [ 0.381152] Last level dTLB entries: 4KB 512, 2MB 8, 4MB 4, 1GB 0 |
| [ 0.381158] Spectre V2 : Mitigation: Full AMD retpoline |
| [ 0.381159] Spectre V2 : Spectre v2 / SpectreRSB mitigation: Filling RSB on context switch |
| [ 0.381161] Speculative Store Bypass: Vulnerable |
| [ 0.381394] Freeing SMP alternatives memory: 32K |
| [ 0.381397] After check_bugs |
| [ 0.381401] After acpi_subsystem_init |
| [ 0.381402] After arch_post_acpi_subsys_init |
| [ 0.381403] After sfi_init_late |
| [ 0.381406] After rcu_scheduler_starting |
| [ 0.381544] After find_task_by_pid_ns |
| [ 0.381547] After numa_default_policy |
| [ 0.381582] After rcu_read_lock |
| [ 0.381583] After rcu_read_unlock |
| [ 0.381589] After kthreadd_done |
| [ 0.382450] random: 1 |
| [ 0.382450] random: 2 |
| [ 0.382450] random: 3 |
| [ 0.382450] random: 4 |
| [ 0.401452] random: 1 |
| [ 0.401453] random: 2 |
| [ 0.401455] random: 3 |
| [ 0.401455] random: 4 |
| [ 0.465452] random: 1 |
| [ 0.465453] random: 2 |
| [ 0.465455] random: 3 |
| [ 0.465456] random: 4 |
| [ 0.483450] smpboot: CPU0: AMD E-350D APU with Radeon(tm) HD Graphics (family: 0x14, model: 0x2, stepping: 0x0) |
| [ 0.483450] Performance Events: AMD PMU driver. |
| [ 0.483450] ... version: 0 |
| [ 0.483450] ... bit width: 48 |
| [ 0.483450] ... generic registers: 4 |
| [ 0.483450] ... value mask: 0000ffffffffffff |
| [ 0.483450] ... max period: 00007fffffffffff |
| [ 0.483450] ... fixed-purpose events: 0 |
| [ 0.483450] ... event mask: 000000000000000f |
| [ 0.483450] rcu: Hierarchical SRCU implementation. |
| [ 0.483729] smp: Bringing up secondary CPUs ... |
| [ 0.483992] CPU 1 irqstacks, hard=(ptrval) soft=(ptrval) |
| [ 0.483994] x86: Booting SMP configuration: |
| [ 0.483997] .... node #0, CPUs: #1 |
| [ 0.002179] Initializing CPU#1 |
| [ 0.484509] After schedule_preempt_disabled |
| [ 0.484534] smp: Brought up 1 node, 2 CPUs |
| [ 0.484534] smpboot: Max logical packages: 1 |
| [ 0.484534] smpboot: Total of 2 processors activated (6399.90 BogoMIPS) |
| [ 0.486668] devtmpfs: initialized |
| [ 0.487464] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 1911260446275000 ns |
| [ 0.487464] futex hash table entries: 512 (order: 3, 32768 bytes) |
| [ 0.487464] pinctrl core: initialized pinctrl subsystem |
| [ 0.487464] PM: RTC time: 07:14:19, date: 2019-04-23 |
| [ 0.487508] NET: Registered protocol family 16 |
| [ 0.487869] audit: initializing netlink subsys (disabled) |
| [ 0.488528] audit: type=2000 audit(1556003659.113:1): state=initialized audit_enabled=0 res=1 |
| [ 0.488713] cpuidle: using governor menu |
| [ 0.488738] ACPI: bus type PCI registered |
| [ 0.490016] PCI: Using configuration type 1 for base access |
| [ 0.490017] PCI: Using configuration type 1 for extended access |
| [ 0.490326] mtrr: your CPUs had inconsistent variable MTRR settings |
| [ 0.490327] mtrr: probably your BIOS does not setup all CPUs. |
| [ 0.490328] mtrr: corrected configuration. |
| [ 0.494566] HugeTLB registered 2.00 MiB page size, pre-allocated 0 pages |
| [ 0.494566] cryptd: max_cpu_qlen set to 1000 |
| [ 0.495650] ACPI: Added _OSI(Module Device) |
| [ 0.495652] ACPI: Added _OSI(Processor Device) |
| [ 0.495654] ACPI: Added _OSI(3.0 _SCP Extensions) |
| [ 0.495656] ACPI: Added _OSI(Processor Aggregator Device) |
| [ 0.495659] ACPI: Added _OSI(Linux-Dell-Video) |
| [ 0.495662] ACPI: Added _OSI(Linux-Lenovo-NV-HDMI-Audio) |
| [ 0.495664] ACPI: Added _OSI(Linux-HPI-Hybrid-Graphics) |
| [ 0.506496] ACPI: 4 ACPI AML tables successfully acquired and loaded |
| [ 0.509557] ACPI: Interpreter enabled |
| [ 0.509603] ACPI: (supports S0 S1 S3 S5) |
| [ 0.509606] ACPI: Using IOAPIC for interrupt routing |
| [ 0.509650] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug |
| [ 0.510099] ACPI: Enabled 19 GPEs in block 00 to 1F |
| [ 0.520207] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff]) |
| [ 0.520221] acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI] |
| [ 0.520383] acpi PNP0A08:00: _OSC: OS now controls [PME AER PCIeCapability LTR] |
| [ 0.520842] PCI host bridge to bus 0000:00 |
| [ 0.520847] pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7 window] |
| [ 0.520851] pci_bus 0000:00: root bus resource [io 0x0d00-0xffff window] |
| [ 0.520854] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff] |
| [ 0.520857] pci_bus 0000:00: root bus resource [mem 0xe0000000-0xffffffff] |
| [ 0.520861] pci_bus 0000:00: root bus resource [bus 00-ff] |
| [ 0.520878] pci 0000:00:00.0: [1022:1510] type 00 class 0x060000 |
| [ 0.521165] pci 0000:00:01.0: [1002:9802] type 00 class 0x030000 |
| [ 0.521191] pci 0000:00:01.0: reg 0x10: [mem 0xe0000000-0xefffffff pref] |
| [ 0.521201] pci 0000:00:01.0: reg 0x14: [io 0x2000-0x20ff] |
| [ 0.521211] pci 0000:00:01.0: reg 0x18: [mem 0xf0100000-0xf013ffff] |
| [ 0.521245] pci 0000:00:01.0: enabling Extended Tags |
| [ 0.521300] pci 0000:00:01.0: supports D1 D2 |
| [ 0.521554] pci 0000:00:01.1: [1002:1314] type 00 class 0x040300 |
| [ 0.521577] pci 0000:00:01.1: reg 0x10: [mem 0xf0140000-0xf0143fff] |
| [ 0.521623] pci 0000:00:01.1: enabling Extended Tags |
| [ 0.521675] pci 0000:00:01.1: supports D1 D2 |
| [ 0.522015] pci 0000:00:11.0: [1002:4391] type 00 class 0x010601 |
| [ 0.522044] pci 0000:00:11.0: reg 0x10: [io 0x2410-0x2417] |
| [ 0.522057] pci 0000:00:11.0: reg 0x14: [io 0x2420-0x2423] |
| [ 0.522070] pci 0000:00:11.0: reg 0x18: [io 0x2418-0x241f] |
| [ 0.522083] pci 0000:00:11.0: reg 0x1c: [io 0x2424-0x2427] |
| [ 0.522097] pci 0000:00:11.0: reg 0x20: [io 0x2400-0x240f] |
| [ 0.522110] pci 0000:00:11.0: reg 0x24: [mem 0xf014b000-0xf014b3ff] |
| [ 0.522467] pci 0000:00:12.0: [1002:4397] type 00 class 0x0c0310 |
| [ 0.522492] pci 0000:00:12.0: reg 0x10: [mem 0xf0148000-0xf0148fff] |
| [ 0.522869] pci 0000:00:12.2: [1002:4396] type 00 class 0x0c0320 |
| [ 0.522899] pci 0000:00:12.2: reg 0x10: [mem 0xf014c000-0xf014c0ff] |
| [ 0.523011] pci 0000:00:12.2: supports D1 D2 |
| [ 0.523014] pci 0000:00:12.2: PME# supported from D0 D1 D2 D3hot |
| [ 0.523016] pci 0000:00:12.2: pme_poll = true |
| [ 0.523018] pci 0000:00:12.2: after device_set_wakeup_capable() |
| [ 0.523024] pci 0000:00:12.2: after pci_pme_active() |
| [ 0.523330] pci 0000:00:13.0: [1002:4397] type 00 class 0x0c0310 |
| [ 0.523355] pci 0000:00:13.0: reg 0x10: [mem 0xf0149000-0xf0149fff] |
| [ 0.523743] pci 0000:00:13.2: [1002:4396] type 00 class 0x0c0320 |
| [ 0.523772] pci 0000:00:13.2: reg 0x10: [mem 0xf014d000-0xf014d0ff] |
| [ 0.523884] pci 0000:00:13.2: supports D1 D2 |
| [ 0.523886] pci 0000:00:13.2: PME# supported from D0 D1 D2 D3hot |
| [ 0.523888] pci 0000:00:13.2: pme_poll = true |
| [ 0.523890] pci 0000:00:13.2: after device_set_wakeup_capable() |
| [ 0.523895] pci 0000:00:13.2: after pci_pme_active() |
| [ 0.524200] pci 0000:00:14.0: [1002:4385] type 00 class 0x0c0500 |
| [ 0.524591] pci 0000:00:14.2: [1002:4383] type 00 class 0x040300 |
| [ 0.524625] pci 0000:00:14.2: reg 0x10: [mem 0xf0144000-0xf0147fff 64bit] |
| [ 0.524720] pci 0000:00:14.2: PME# supported from D0 D3hot D3cold |
| [ 0.524722] pci 0000:00:14.2: pme_poll = true |
| [ 0.524725] pci 0000:00:14.2: after device_set_wakeup_capable() |
| [ 0.524730] pci 0000:00:14.2: after pci_pme_active() |
| [ 0.525030] pci 0000:00:14.3: [1002:439d] type 00 class 0x060100 |
| [ 0.525413] pci 0000:00:14.4: [1002:4384] type 01 class 0x060401 |
| [ 0.525783] pci 0000:00:14.5: [1002:4399] type 00 class 0x0c0310 |
| [ 0.525808] pci 0000:00:14.5: reg 0x10: [mem 0xf014a000-0xf014afff] |
| [ 0.526191] pci 0000:00:15.0: [1002:43a0] type 01 class 0x060400 |
| [ 0.526251] pci 0000:00:15.0: enabling Extended Tags |
| [ 0.526330] pci 0000:00:15.0: supports D1 D2 |
| [ 0.526666] pci 0000:00:15.1: [1002:43a1] type 01 class 0x060400 |
| [ 0.526734] pci 0000:00:15.1: enabling Extended Tags |
| [ 0.526808] pci 0000:00:15.1: supports D1 D2 |
| [ 0.527144] pci 0000:00:18.0: [1022:1700] type 00 class 0x060000 |
| [ 0.527397] pci 0000:00:18.1: [1022:1701] type 00 class 0x060000 |
| [ 0.527646] pci 0000:00:18.2: [1022:1702] type 00 class 0x060000 |
| [ 0.527893] pci 0000:00:18.3: [1022:1703] type 00 class 0x060000 |
| [ 0.528164] pci 0000:00:18.4: [1022:1704] type 00 class 0x060000 |
| [ 0.528407] pci 0000:00:18.5: [1022:1718] type 00 class 0x060000 |
| [ 0.528663] pci 0000:00:18.6: [1022:1716] type 00 class 0x060000 |
| [ 0.528909] pci 0000:00:18.7: [1022:1719] type 00 class 0x060000 |
| [ 0.529246] pci_bus 0000:01: extended config space not accessible |
| [ 0.529344] pci 0000:00:14.4: PCI bridge to [bus 01] (subtractive decode) |
| [ 0.529359] pci 0000:00:14.4: bridge window [io 0x0000-0x0cf7 window] (subtractive decode) |
| [ 0.529362] pci 0000:00:14.4: bridge window [io 0x0d00-0xffff window] (subtractive decode) |
| [ 0.529365] pci 0000:00:14.4: bridge window [mem 0x000a0000-0x000bffff] (subtractive decode) |
| [ 0.529368] pci 0000:00:14.4: bridge window [mem 0xe0000000-0xffffffff] (subtractive decode) |
| [ 0.529446] pci 0000:00:15.0: PCI bridge to [bus 02] |
| [ 0.529567] pci 0000:03:00.0: [10ec:8168] type 00 class 0x020000 |
| [ 0.529609] pci 0000:03:00.0: reg 0x10: [io 0x1000-0x10ff] |
| [ 0.529648] pci 0000:03:00.0: reg 0x18: [mem 0xf0004000-0xf0004fff 64bit pref] |
| [ 0.529672] pci 0000:03:00.0: reg 0x20: [mem 0xf0000000-0xf0003fff 64bit pref] |
| [ 0.529823] pci 0000:03:00.0: supports D1 D2 |
| [ 0.529826] pci 0000:03:00.0: PME# supported from D0 D1 D2 D3hot D3cold |
| [ 0.529828] pci 0000:03:00.0: pme_poll = true |
| [ 0.529830] pci 0000:03:00.0: after device_set_wakeup_capable() |
| [ 0.529836] pci 0000:03:00.0: after pci_pme_active() |
| [ 0.533568] pci 0000:00:15.1: PCI bridge to [bus 03] |
| [ 0.533587] pci 0000:00:15.1: bridge window [io 0x1000-0x1fff] |
| [ 0.533604] pci 0000:00:15.1: bridge window [mem 0xf0000000-0xf00fffff 64bit pref] |
| [ 0.533648] pci_bus 0000:00: on NUMA node 0 |
| [ 0.535235] ACPI: PCI Interrupt Link [INTA] (IRQs 3 4 5 7 10 11 12 15) *0, disabled. |
| [ 0.535584] ACPI: PCI Interrupt Link [INTB] (IRQs 3 4 5 7 10 11 12 15) *0, disabled. |
| [ 0.535904] ACPI: PCI Interrupt Link [INTC] (IRQs 3 4 5 7 10 11 12 15) *0, disabled. |
| [ 0.536223] ACPI: PCI Interrupt Link [INTD] (IRQs 3 4 5 7 10 11 12 15) *0, disabled. |
| [ 0.536489] ACPI: PCI Interrupt Link [INTE] (IRQs 3 4 5 7 10 11 12 15) *0, disabled. |
| [ 0.536809] ACPI: PCI Interrupt Link [INTF] (IRQs 9) *0, disabled. |
| [ 0.537125] ACPI: PCI Interrupt Link [INTG] (IRQs 3 4 5 7 10 11 12 15) *0, disabled. |
| [ 0.537489] ACPI: PCI Interrupt Link [INTH] (IRQs 3 4 5 7 10 11 12 15) *0, disabled. |
| [ 0.538511] pci 0000:00:01.0: vgaarb: setting as boot VGA device |
| [ 0.538511] pci 0000:00:01.0: vgaarb: VGA device added: decodes=io+mem,owns=io+mem,locks=none |
| [ 0.538528] pci 0000:00:01.0: vgaarb: bridge control possible |
| [ 0.538531] vgaarb: loaded |
| [ 0.538792] SCSI subsystem initialized |
| [ 0.538881] libata version 3.00 loaded. |
| [ 0.539475] ACPI: bus type USB registered |
| [ 0.539513] usbcore: registered new interface driver usbfs |
| [ 0.539534] usbcore: registered new interface driver hub |
| [ 0.539558] usbcore: registered new device driver usb |
| [ 0.539722] PCI: Using ACPI for IRQ routing |
| [ 0.539722] PCI: pci_cache_line_size set to 64 bytes |
| [ 0.539722] e820: reserve RAM buffer [mem 0xc7d4c000-0xc7ffffff] |
| [ 0.539722] e820: reserve RAM buffer [mem 0x11f000000-0x11fffffff] |
| [ 0.539966] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0 |
| [ 0.539966] hpet0: 3 comparators, 32-bit 14.318180 MHz counter |
| [ 0.542538] clocksource: Switched to clocksource tsc-early |
| [ 0.571803] VFS: Disk quotas dquot_6.6.0 |
| [ 0.571855] VFS: Dquot-cache hash table entries: 1024 (order 0, 4096 bytes) |
| [ 0.571932] *** VALIDATE hugetlbfs *** |
| [ 0.572026] pnp: PnP ACPI init |
| [ 0.572839] pnp 00:00: Plug and Play ACPI device, IDs PNP0b00 (active) |
| [ 0.572941] pnp 00:01: Plug and Play ACPI device, IDs PNP0303 PNP030b (active) |
| [ 0.573020] pnp 00:02: Plug and Play ACPI device, IDs PNP0f13 (active) |
| [ 0.573707] pnp 00:03: Plug and Play ACPI device, IDs PNP0303 PNP030b (active) |
| [ 0.573784] pnp 00:04: Plug and Play ACPI device, IDs PNP0f13 (active) |
| [ 0.573814] pnp: PnP ACPI: found 5 devices |
| [ 0.578775] pci 0000:00:14.4: PCI bridge to [bus 01] |
| [ 0.578867] pci 0000:00:15.0: PCI bridge to [bus 02] |
| [ 0.578882] pci 0000:00:15.1: PCI bridge to [bus 03] |
| [ 0.578888] pci 0000:00:15.1: bridge window [io 0x1000-0x1fff] |
| [ 0.578899] pci 0000:00:15.1: bridge window [mem 0xf0000000-0xf00fffff 64bit pref] |
| [ 0.578912] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7 window] |
| [ 0.578915] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff window] |
| [ 0.578918] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff] |
| [ 0.578921] pci_bus 0000:00: resource 7 [mem 0xe0000000-0xffffffff] |
| [ 0.578924] pci_bus 0000:01: resource 4 [io 0x0000-0x0cf7 window] |
| [ 0.578927] pci_bus 0000:01: resource 5 [io 0x0d00-0xffff window] |
| [ 0.578930] pci_bus 0000:01: resource 6 [mem 0x000a0000-0x000bffff] |
| [ 0.578932] pci_bus 0000:01: resource 7 [mem 0xe0000000-0xffffffff] |
| [ 0.578936] pci_bus 0000:03: resource 0 [io 0x1000-0x1fff] |
| [ 0.578938] pci_bus 0000:03: resource 2 [mem 0xf0000000-0xf00fffff 64bit pref] |
| [ 0.579138] NET: Registered protocol family 2 |
| [ 0.579473] tcp_listen_portaddr_hash hash table entries: 512 (order: 0, 6144 bytes) |
| [ 0.579483] TCP established hash table entries: 8192 (order: 3, 32768 bytes) |
| [ 0.579512] TCP bind hash table entries: 8192 (order: 4, 65536 bytes) |
| [ 0.579547] TCP: Hash tables configured (established 8192 bind 8192) |
| [ 0.579609] UDP hash table entries: 512 (order: 2, 16384 bytes) |
| [ 0.579622] UDP-Lite hash table entries: 512 (order: 2, 16384 bytes) |
| [ 0.579740] NET: Registered protocol family 1 |
| [ 0.579781] pci 0000:00:01.0: Video device with shadowed ROM at [mem 0x000c0000-0x000dffff] |
| [ 0.582955] PCI: CLS 64 bytes, default 64 |
| [ 0.583086] PCI-DMA: Using software bounce buffering for IO (SWIOTLB) |
| [ 0.583090] software IO TLB: mapped [mem 0x2f9fd000-0x339fd000] (64MB) |
| [ 0.583282] LVT offset 0 assigned for vector 0x400 |
| [ 0.583372] perf: AMD IBS detected (0x000000ff) |
| [ 0.584852] Initialise system trusted keyrings |
| [ 0.584999] workingset: timestamp_bits=14 max_order=20 bucket_order=6 |
| [ 0.588331] zbud: loaded |
| [ 0.589362] alg: self-tests disabled |
| [ 0.592762] NET: Registered protocol family 38 |
| [ 0.592777] Key type asymmetric registered |
| [ 0.592780] Asymmetric key parser 'x509' registered |
| [ 0.592818] bounce: pool size: 64 pages |
| [ 0.592857] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 251) |
| [ 0.593003] io scheduler mq-deadline registered |
| [ 0.593007] io scheduler kyber registered |
| [ 0.594086] pcieport 0000:00:15.0: Signaling PME with IRQ 24 |
| [ 0.595501] pcieport 0000:00:15.1: Signaling PME with IRQ 25 |
| [ 0.596202] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input0 |
| [ 0.596246] ACPI: Power Button [PWRB] |
| [ 0.596359] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input1 |
| [ 0.596376] ACPI: Power Button [PWRF] |
| [ 0.597984] thermal LNXTHERM:00: registered as thermal_zone0 |
| [ 0.597988] ACPI: Thermal Zone [TZ00] (48 C) |
| [ 0.598366] initcall serial8250_init blacklisted |
| [ 0.599240] Non-volatile memory driver v1.3 |
| [ 0.599386] Linux agpgart interface v0.103 |
| [ 0.600096] [drm] radeon kernel modesetting enabled. |
| [ 0.600134] radeon 0000:00:01.0: vgaarb: deactivate vga console |
| [ 0.600887] [drm] initializing kernel modesetting (PALM 0x1002:0x9802 0x1002:0x9802 0x00). |
| [ 0.600961] ATOM BIOS: AMD |
| [ 0.601051] radeon 0000:00:01.0: VRAM: 384M 0x0000000000000000 - 0x0000000017FFFFFF (384M used) |
| [ 0.601054] radeon 0000:00:01.0: GTT: 1024M 0x0000000018000000 - 0x0000000057FFFFFF |
| [ 0.601062] [drm] Detected VRAM RAM=384M, BAR=256M |
| [ 0.601064] [drm] RAM width 32bits DDR |
| [ 0.601266] [TTM] Zone kernel: Available graphics memory: 385610 kiB |
| [ 0.601270] [TTM] Zone highmem: Available graphics memory: 1822950 kiB |
| [ 0.601272] [TTM] Initializing pool allocator |
| [ 0.601284] [TTM] Initializing DMA pool allocator |
| [ 0.601362] [drm] radeon: 384M of VRAM memory ready |
| [ 0.601365] [drm] radeon: 1024M of GTT memory ready. |
| [ 0.601390] [drm] Loading PALM Microcode |
| [ 0.601398] [drm] Internal thermal controller without fan control |
| [ 0.601467] [drm] Found smc ucode version: 0x00010601 |
| [ 0.601560] [drm] radeon: dpm initialized |
| [ 0.601597] [drm] GART: num cpu pages 262144, num gpu pages 262144 |
| [ 0.605720] [drm] GART: Restore entries: num cpu pages 262144, num gpu pages 262144 |
| [ 0.610854] [drm] GART: Done restoring entries |
| [ 0.610864] [drm] PCIE GART of 1024M enabled (table at 0x0000000000162000). |
| [ 0.611064] radeon 0000:00:01.0: WB enabled |
| [ 0.611072] radeon 0000:00:01.0: fence driver on ring 0 use gpu addr 0x0000000018000c00 and cpu addr 0x(ptrval) |
| [ 0.611076] radeon 0000:00:01.0: fence driver on ring 3 use gpu addr 0x0000000018000c0c and cpu addr 0x(ptrval) |
| [ 0.611987] radeon 0000:00:01.0: fence driver on ring 5 use gpu addr 0x0000000000072118 and cpu addr 0x(ptrval) |
| [ 0.611991] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013). |
| [ 0.611992] [drm] Driver supports precise vblank timestamp query. |
| [ 0.611995] radeon 0000:00:01.0: radeon: MSI limited to 32-bit |
| [ 0.612141] radeon 0000:00:01.0: radeon: using MSI. |
| [ 0.612183] [drm] radeon: irq initialized. |
| [ 0.628813] [drm] ring test on 0 succeeded in 1 usecs |
| [ 0.628822] [drm] ring test on 3 succeeded in 3 usecs |
| [ 0.642885] [drm] ring test on 5 succeeded in 1 usecs |
| [ 0.644904] [drm] UVD initialized successfully. |
| [ 0.645137] [drm] ib test on ring 0 succeeded in 0 usecs |
| [ 0.645197] [drm] ib test on ring 3 succeeded in 0 usecs |
| [ 0.697341] [drm] ib test on ring 5 succeeded |
| [ 0.700053] [drm] Radeon Display Connectors |
| [ 0.700054] [drm] Connector 0: |
| [ 0.700055] [drm] HDMI-A-1 |
| [ 0.700057] [drm] HPD1 |
| [ 0.700060] [drm] DDC: 0x6430 0x6430 0x6434 0x6434 0x6438 0x6438 0x643c 0x643c |
| [ 0.700061] [drm] Encoders: |
| [ 0.700063] [drm] DFP1: INTERNAL_UNIPHY |
| [ 0.700064] [drm] Connector 1: |
| [ 0.700065] [drm] HDMI-A-2 |
| [ 0.700066] [drm] HPD2 |
| [ 0.700069] [drm] DDC: 0x6440 0x6440 0x6444 0x6444 0x6448 0x6448 0x644c 0x644c |
| [ 0.700070] [drm] Encoders: |
| [ 0.700071] [drm] DFP2: INTERNAL_UNIPHY |
| [ 0.700072] [drm] Connector 2: |
| [ 0.700073] [drm] VGA-1 |
| [ 0.700075] [drm] DDC: 0x64d8 0x64d8 0x64dc 0x64dc 0x64e0 0x64e0 0x64e4 0x64e4 |
| [ 0.700076] [drm] Encoders: |
| [ 0.700077] [drm] CRT1: INTERNAL_KLDSCP_DAC1 |
| [ 0.741020] [drm] fb mappable at 0xE0366000 |
| [ 0.741022] [drm] vram apper at 0xE0000000 |
| [ 0.741023] [drm] size 5242880 |
| [ 0.741024] [drm] fb depth is 24 |
| [ 0.741025] [drm] pitch is 5120 |
| [ 0.741435] fbcon: radeondrmfb (fb0) is primary device |
| [ 0.762162] Console: switching to colour frame buffer device 160x64 |
| [ 0.772969] radeon 0000:00:01.0: fb0: radeondrmfb frame buffer device |
| [ 0.773102] [drm] Initialized radeon 2.50.0 20080528 for 0000:00:01.0 on minor 0 |
| [ 0.773827] ahci 0000:00:11.0: version 3.0 |
| [ 0.774573] ahci 0000:00:11.0: AHCI 0001.0200 32 slots 6 ports 6 Gbps 0x3f impl SATA mode |
| [ 0.774579] ahci 0000:00:11.0: flags: 64bit ncq sntf ilck led clo pmp pio slum part |
| [ 0.777179] scsi host0: ahci |
| [ 0.778078] scsi host1: ahci |
| [ 0.778634] scsi host2: ahci |
| [ 0.779232] scsi host3: ahci |
| [ 0.779806] scsi host4: ahci |
| [ 0.780446] scsi host5: ahci |
| [ 0.780761] ata1: SATA max UDMA/133 abar m1024@0xf014b000 port 0xf014b100 irq 19 |
| [ 0.780766] ata2: SATA max UDMA/133 abar m1024@0xf014b000 port 0xf014b180 irq 19 |
| [ 0.780769] ata3: SATA max UDMA/133 abar m1024@0xf014b000 port 0xf014b200 irq 19 |
| [ 0.780773] ata4: SATA max UDMA/133 abar m1024@0xf014b000 port 0xf014b280 irq 19 |
| [ 0.780776] ata5: SATA max UDMA/133 abar m1024@0xf014b000 port 0xf014b300 irq 19 |
| [ 0.780779] ata6: SATA max UDMA/133 abar m1024@0xf014b000 port 0xf014b380 irq 19 |
| [ 0.781031] ata2: SATA link down (SStatus 0 SControl 0) |
| [ 0.781118] libphy: Fixed MDIO Bus: probed |
| [ 0.781219] usbcore: registered new interface driver usbserial_generic |
| [ 0.781237] usbserial: USB Serial support registered for generic |
| [ 0.781355] i8042: PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at 0x60,0x64 irq 1,12 |
| [ 0.783840] ata3: SATA link down (SStatus 0 SControl 0) |
| [ 0.785358] serio: i8042 KBD port at 0x60,0x64 irq 1 |
| [ 0.785380] serio: i8042 AUX port at 0x60,0x64 irq 12 |
| [ 0.785865] mousedev: PS/2 mouse device common for all mice |
| [ 0.785996] ata4: SATA link down (SStatus 0 SControl 0) |
| [ 0.786214] ata5: SATA link down (SStatus 0 SControl 0) |
| [ 0.786253] ata6: SATA link down (SStatus 0 SControl 0) |
| [ 0.786516] rtc_cmos 00:00: RTC can wake from S4 |
| [ 0.786880] rtc_cmos 00:00: registered as rtc0 |
| [ 0.786919] rtc_cmos 00:00: alarms up to one day, 114 bytes nvram, hpet irqs |
| [ 0.787040] w83627ehf: Found NCT6775F chip at 0x290 |
| [ 0.787088] ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 0) |
| [ 0.787476] ata1.00: ATA-9: SanDisk SDSSDP064G, 2.0.0, max UDMA/133 |
| [ 0.787483] ata1.00: 125045424 sectors, multi 1: LBA48 NCQ (depth 32) |
| [ 0.787549] w83627ehf w83627ehf.656: hwmon_device_register() is deprecated. Please convert the driver to use hwmon_device_register_with_info(). |
| [ 0.787665] device-mapper: uevent: version 1.0.3 |
| [ 0.787872] device-mapper: ioctl: 4.40.0-ioctl (2019-01-18) initialised: dm-devel@redhat.com |
| [ 0.787969] ata1.00: configured for UDMA/133 |
| [ 0.788012] hidraw: raw HID events driver (C) Jiri Kosina |
| [ 0.788128] usbcore: registered new interface driver usbhid |
| [ 0.788129] usbhid: USB HID core driver |
| [ 0.788516] scsi 0:0:0:0: Direct-Access ATA SanDisk SDSSDP06 0 PQ: 0 ANSI: 5 |
| [ 0.788531] Initializing XFRM netlink socket |
| [ 0.788876] NET: Registered protocol family 10 |
| [ 0.789123] sd 0:0:0:0: Attached scsi generic sg0 type 0 |
| [ 0.789557] sd 0:0:0:0: [sda] 125045424 512-byte logical blocks: (64.0 GB/59.6 GiB) |
| [ 0.789591] sd 0:0:0:0: [sda] Write Protect is off |
| [ 0.789595] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 |
| [ 0.789646] Segment Routing with IPv6 |
| [ 0.789649] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA |
| [ 0.789691] mip6: Mobile IPv6 |
| [ 0.789697] NET: Registered protocol family 17 |
| [ 0.790383] Using IPI No-Shortcut mode |
| [ 0.790413] sched_clock: Marking stable (789101659, 1179491)->(894418652, -104137502) |
| [ 0.791161] sda: sda1 |
| [ 0.791777] registered taskstats version 1 |
| [ 0.791785] Loading compiled-in X.509 certificates |
| [ 0.791833] zswap: loaded using pool lzo/zbud |
| [ 0.792024] sd 0:0:0:0: [sda] Attached SCSI disk |
| [ 0.792611] PM: Magic number: 15:623:218 |
| [ 0.792864] rtc_cmos 00:00: setting system clock to 2019-04-23T07:14:20 UTC (1556003660) |
| [ 0.813854] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input2 |
| [ 0.878735] EXT4-fs (sda1): mounted filesystem with ordered data mode. Opts: (null) |
| [ 0.878778] VFS: Mounted root (ext4 filesystem) on device 8:1. |
| [ 0.880246] random: 1 |
| [ 0.880250] random: 2 |
| [ 0.880252] random: 3 |
| [ 0.880252] random: 4 |
| [ 0.880255] random: fast init done |
| [ 0.881205] devtmpfs: mounted |
| [ 0.881227] After kernel_init_freeable |
| [ 0.883618] Freeing unused kernel image memory: 1128K |
| [ 0.886430] Write protecting kernel text and read-only data: 11752k |
| [ 0.886435] NX-protecting the kernel data: 5468k |
| [ 0.887213] x86/mm: Checked W+X mappings: passed, no W+X pages found. |
| [ 0.887214] After mark_readonly |
| [ 0.887220] After pti_finalize |
| [ 0.887221] rcu_end_inkernel_boot |
| [ 0.887224] Run /sbin/init as init process |
| [ 1.193454] systemd[1]: systemd 241 running in system mode. (+PAM +AUDIT +SELINUX +IMA +APPARMOR +SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ +LZ4 +SECCOMP +BLKID +ELFUTILS +KMOD -IDN2 +IDN -PCRE2 default-hierarchy=hybrid) |
| [ 1.205413] systemd[1]: Detected architecture x86. |
| [ 1.209554] systemd[1]: Set hostname to <kodi>. |
| [ 1.412545] systemd[1]: File /lib/systemd/system/systemd-journald.service:11 configures an IP firewall (IPAddressDeny=any), but the local system does not support BPF/cgroup based firewalling. |
| [ 1.412555] systemd[1]: Proceeding WITHOUT firewalling in effect! (This warning is only shown for the first loaded unit using IP firewalling.) |
| [ 1.623512] tsc: Refined TSC clocksource calibration: 1600.000 MHz |
| [ 1.623559] clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x171024fa93b, max_idle_ns: 440795253189 ns |
| [ 1.623604] clocksource: Switched to clocksource tsc |
| [ 1.642130] random: systemd: uninitialized urandom read (16 bytes read) |
| [ 1.645032] random: systemd: uninitialized urandom read (16 bytes read) |
| [ 1.654789] systemd[1]: Listening on Process Core Dump Socket. |
| [ 1.654955] random: systemd: uninitialized urandom read (16 bytes read) |
| [ 1.654982] systemd[1]: Reached target Local File Systems. |
| [ 1.655527] systemd[1]: Set up automount Arbitrary Executable File Formats File System Automount Point. |
| [ 1.655699] systemd[1]: Started Dispatch Password Requests to Console Directory Watch. |
| [ 1.655818] systemd[1]: Started Forward Password Requests to Wall Directory Watch. |
| [ 2.274932] acpi_cpufreq: overriding BIOS provided _PSD data |
| [ 2.572641] 1 |
| [ 2.572675] 2 |
| [ 2.572999] 3 |
| [ 2.573000] 4 |
| [ 2.573000] 5 |
| [ 2.573001] 7 |
| [ 2.573008] 8 |
| [ 2.573008] 9 |
| [ 2.573074] 1 |
| [ 2.573086] 2 |
| [ 2.573402] 3 |
| [ 2.573404] 4 |
| [ 2.573404] 5 |
| [ 2.573405] 7 |
| [ 2.573406] 8 |
| [ 2.573407] 9 |
| [ 2.615406] input: HD-Audio Generic HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:01.1/sound/card0/input5 |
| [ 2.625294] snd_hda_codec_realtek hdaudioC1D0: ALC892: SKU not ready 0x00000100 |
| [ 2.627110] snd_hda_codec_realtek hdaudioC1D0: autoconfig for ALC892: line_outs=4 (0x14/0x16/0x15/0x17/0x0) type:line |
| [ 2.627122] snd_hda_codec_realtek hdaudioC1D0: speaker_outs=0 (0x0/0x0/0x0/0x0/0x0) |
| [ 2.627126] snd_hda_codec_realtek hdaudioC1D0: hp_outs=1 (0x1b/0x0/0x0/0x0/0x0) |
| [ 2.627128] snd_hda_codec_realtek hdaudioC1D0: mono: mono_out=0x0 |
| [ 2.627131] snd_hda_codec_realtek hdaudioC1D0: dig-out=0x1e/0x0 |
| [ 2.627133] snd_hda_codec_realtek hdaudioC1D0: inputs: |
| [ 2.627138] snd_hda_codec_realtek hdaudioC1D0: Rear Mic=0x18 |
| [ 2.627141] snd_hda_codec_realtek hdaudioC1D0: Front Mic=0x19 |
| [ 2.627143] snd_hda_codec_realtek hdaudioC1D0: Line=0x1a |
| [ 2.627146] snd_hda_codec_realtek hdaudioC1D0: CD=0x1c |
| [ 2.684705] input: HDA ATI SB Rear Mic as /devices/pci0000:00/0000:00:14.2/sound/card1/input6 |
| [ 2.684843] input: HDA ATI SB Front Mic as /devices/pci0000:00/0000:00:14.2/sound/card1/input7 |
| [ 2.684963] input: HDA ATI SB Line as /devices/pci0000:00/0000:00:14.2/sound/card1/input8 |
| [ 2.685084] input: HDA ATI SB Line Out Front as /devices/pci0000:00/0000:00:14.2/sound/card1/input9 |
| [ 2.685207] input: HDA ATI SB Line Out Surround as /devices/pci0000:00/0000:00:14.2/sound/card1/input10 |
| [ 2.685348] input: HDA ATI SB Line Out CLFE as /devices/pci0000:00/0000:00:14.2/sound/card1/input11 |
| [ 2.685496] input: HDA ATI SB Line Out Side as /devices/pci0000:00/0000:00:14.2/sound/card1/input12 |
| [ 2.686128] input: HDA ATI SB Front Headphone as /devices/pci0000:00/0000:00:14.2/sound/card1/input13 |
| [ 2.686824] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver |
| [ 2.691777] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver |
| [ 2.694750] ehci-pci: EHCI PCI platform driver |
| [ 2.695281] QUIRK: Enable AMD PLL fix |
| [ 2.695336] ehci-pci 0000:00:12.2: EHCI Host Controller |
| [ 2.695351] ehci-pci 0000:00:12.2: new USB bus registered, assigned bus number 1 |
| [ 2.695366] ehci-pci 0000:00:12.2: applying AMD SB700/SB800/Hudson-2/3 EHCI dummy qh workaround |
| [ 2.695450] ehci-pci 0000:00:12.2: debug port 1 |
| [ 2.695590] ehci-pci 0000:00:12.2: irq 17, io mem 0xf014c000 |
| [ 2.702618] ehci-pci 0000:00:12.2: USB 2.0 started, EHCI 1.00 |
| [ 2.702825] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 5.01 |
| [ 2.702829] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 |
| [ 2.702833] usb usb1: Product: EHCI Host Controller |
| [ 2.702836] usb usb1: Manufacturer: Linux 5.1.0-rc5-00243-ge57333e5121b ehci_hcd |
| [ 2.702839] usb usb1: SerialNumber: 0000:00:12.2 |
| [ 2.703204] hub 1-0:1.0: USB hub found |
| [ 2.703230] hub 1-0:1.0: 5 ports detected |
| [ 2.705856] ehci-pci 0000:00:13.2: EHCI Host Controller |
| [ 2.705890] ehci-pci 0000:00:13.2: new USB bus registered, assigned bus number 2 |
| [ 2.705908] ehci-pci 0000:00:13.2: applying AMD SB700/SB800/Hudson-2/3 EHCI dummy qh workaround |
| [ 2.706005] ehci-pci 0000:00:13.2: debug port 1 |
| [ 2.706079] ehci-pci 0000:00:13.2: irq 17, io mem 0xf014d000 |
| [ 2.712482] ehci-pci 0000:00:13.2: USB 2.0 started, EHCI 1.00 |
| [ 2.712649] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 5.01 |
| [ 2.712652] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1 |
| [ 2.712656] usb usb2: Product: EHCI Host Controller |
| [ 2.712659] usb usb2: Manufacturer: Linux 5.1.0-rc5-00243-ge57333e5121b ehci_hcd |
| [ 2.712662] usb usb2: SerialNumber: 0000:00:13.2 |
| [ 2.714709] hub 2-0:1.0: USB hub found |
| [ 2.714734] hub 2-0:1.0: 5 ports detected |
| [ 2.726930] ohci-pci: OHCI PCI platform driver |
| [ 2.727576] ohci-pci 0000:00:12.0: OHCI PCI host controller |
| [ 2.727593] ohci-pci 0000:00:12.0: new USB bus registered, assigned bus number 3 |
| [ 2.727689] ohci-pci 0000:00:12.0: irq 18, io mem 0xf0148000 |
| [ 2.728343] ohci-pci 0000:00:13.0: OHCI PCI host controller |
| [ 2.728366] ohci-pci 0000:00:13.0: new USB bus registered, assigned bus number 4 |
| [ 2.728528] ohci-pci 0000:00:13.0: irq 18, io mem 0xf0149000 |
| [ 2.728901] ohci-pci 0000:00:14.5: OHCI PCI host controller |
| [ 2.728912] ohci-pci 0000:00:14.5: new USB bus registered, assigned bus number 5 |
| [ 2.728941] ohci-pci 0000:00:14.5: irq 18, io mem 0xf014a000 |
| [ 2.784749] usb usb3: New USB device found, idVendor=1d6b, idProduct=0001, bcdDevice= 5.01 |
| [ 2.784755] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1 |
| [ 2.784759] usb usb3: Product: OHCI PCI host controller |
| [ 2.784762] usb usb3: Manufacturer: Linux 5.1.0-rc5-00243-ge57333e5121b ohci_hcd |
| [ 2.784765] usb usb3: SerialNumber: 0000:00:12.0 |
| [ 2.785122] hub 3-0:1.0: USB hub found |
| [ 2.785214] hub 3-0:1.0: 5 ports detected |
| [ 2.791677] usb usb5: New USB device found, idVendor=1d6b, idProduct=0001, bcdDevice= 5.01 |
| [ 2.791684] usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1 |
| [ 2.791687] usb usb5: Product: OHCI PCI host controller |
| [ 2.791690] usb usb5: Manufacturer: Linux 5.1.0-rc5-00243-ge57333e5121b ohci_hcd |
| [ 2.791693] usb usb5: SerialNumber: 0000:00:14.5 |
| [ 2.792042] hub 5-0:1.0: USB hub found |
| [ 2.792063] hub 5-0:1.0: 2 ports detected |
| [ 2.796191] usb usb4: New USB device found, idVendor=1d6b, idProduct=0001, bcdDevice= 5.01 |
| [ 2.796198] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1 |
| [ 2.796201] usb usb4: Product: OHCI PCI host controller |
| [ 2.796204] usb usb4: Manufacturer: Linux 5.1.0-rc5-00243-ge57333e5121b ohci_hcd |
| [ 2.796207] usb usb4: SerialNumber: 0000:00:13.0 |
| [ 2.796575] hub 4-0:1.0: USB hub found |
| [ 2.796596] hub 4-0:1.0: 5 ports detected |
| [ 3.100436] piix4_smbus 0000:00:14.0: SMBus Host Controller at 0xb00, revision 0 |
| [ 3.100450] piix4_smbus 0000:00:14.0: Using register 0x2c for SMBus port selection |
| [ 3.101957] piix4_smbus 0000:00:14.0: Auxiliary SMBus Host Controller at 0x8060 |
| [ 3.181505] usb 3-2: new low-speed USB device number 2 using ohci-pci |
| [ 3.244241] libphy: r8169: probed |
| [ 3.245797] r8169 0000:03:00.0 eth0: RTL8168e/8111e, bc:5f:f4:c8:d3:98, XID 2c2, IRQ 28 |
| [ 3.245804] r8169 0000:03:00.0 eth0: jumbo features [frames: 9200 bytes, tx checksumming: ko] |
| [ 3.358453] usb 3-2: New USB device found, idVendor=1241, idProduct=1122, bcdDevice= 1.00 |
| [ 3.358485] usb 3-2: New USB device strings: Mfr=0, Product=0, SerialNumber=0 |
| [ 3.368307] input: HID 1241:1122 as /devices/pci0000:00/0000:00:12.0/usb3/3-2/3-2:1.0/0003:1241:1122.0001/input/input14 |
| [ 3.368657] hid-generic 0003:1241:1122.0001: input,hidraw0: USB HID v1.00 Mouse [HID 1241:1122] on usb-0000:00:12.0-2/input0 |
| [ 4.197031] random: crng init done |
| [ 4.197040] random: 7 urandom warning(s) missed due to ratelimiting |
| [ 4.490632] r8169 0000:03:00.0 enp3s0: renamed from eth0 |
| [ 4.532534] r8169 0000:03:00.0: Direct firmware load for rtl_nic/rtl8168e-2.fw failed with error -2 |
| [ 4.532547] r8169 0000:03:00.0 enp3s0: unable to load firmware patch rtl_nic/rtl8168e-2.fw (-2) |
| [ 4.532961] RTL8211DN Gigabit Ethernet r8169-300:00: attached PHY driver [RTL8211DN Gigabit Ethernet] (mii_bus:phy_addr=r8169-300:00, irq=IGNORE) |
| [ 4.633806] A link change request failed with some changes committed already. Interface enp3s0 may have been left with an inconsistent configuration, please check. |
| [ 4.635898] r8169 0000:03:00.0 enp3s0: Link is Down |
| [ 16.351421] r8169 0000:03:00.0 enp3s0: Link is Up - 100Mbps/Full - flow control rx/tx |
| [ 16.351453] IPv6: ADDRCONF(NETDEV_CHANGE): enp3s0: link becomes ready |