blob: 10d9f397b8d2bb2d325765bfffd8945988fdf02e [file] [log] [blame]
[ 0.000000] Linux version 4.12.0-1-amd64 (debian-kernel@lists.debian.org) (gcc version 6.4.0 20170805 (Debian 6.4.0-3) ) #1 SMP Debian 4.12.6-1 (2017-08-12)
[ 0.000000] Command line: BOOT_IMAGE=/vmlinuz-4.12.0-1-amd64 root=UUID=a994a1c5-a911-48bd-a468-4aa6a9728001 ro quiet iomem=relaxed
[ 0.000000] x86/fpu: x87 FPU will use FXSAVE
[ 0.000000] e820: BIOS-provided physical RAM map:
[ 0.000000] BIOS-e820: [mem 0x0000000000000000-0x0000000000000fff] type 16
[ 0.000000] BIOS-e820: [mem 0x0000000000001000-0x000000000009ffff] usable
[ 0.000000] BIOS-e820: [mem 0x00000000000c0000-0x00000000000fffff] reserved
[ 0.000000] BIOS-e820: [mem 0x0000000000100000-0x000000007fb16fff] usable
[ 0.000000] BIOS-e820: [mem 0x000000007fb17000-0x000000007fbfffff] type 16
[ 0.000000] BIOS-e820: [mem 0x000000007fc00000-0x000000008fffffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000f0000000-0x00000000f3ffffff] reserved
[ 0.000000] BIOS-e820: [mem 0x0000000100000000-0x000000026fffffff] usable
[ 0.000000] NX (Execute Disable) protection: active
[ 0.000000] SMBIOS 2.7 present.
[ 0.000000] DMI: LENOVO 7470AE7/7470AE7, BIOS CBET4000 4.6-1425-g6732b4fcdc 09/13/2017
[ 0.000000] tsc: Fast TSC calibration using PIT
[ 0.000000] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
[ 0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable
[ 0.000000] e820: last_pfn = 0x270000 max_arch_pfn = 0x400000000
[ 0.000000] MTRR default type: write-back
[ 0.000000] MTRR fixed ranges enabled:
[ 0.000000] 00000-9FFFF write-back
[ 0.000000] A0000-BFFFF uncachable
[ 0.000000] C0000-FFFFF write-back
[ 0.000000] MTRR variable ranges enabled:
[ 0.000000] 0 base 07FC00000 mask FFFC00000 uncachable
[ 0.000000] 1 base 080000000 mask FC0000000 uncachable
[ 0.000000] 2 base 0C0000000 mask FF0000000 uncachable
[ 0.000000] 3 base 0D0000000 mask FF0000000 write-combining
[ 0.000000] 4 base 0E0000000 mask FE0000000 uncachable
[ 0.000000] 5 disabled
[ 0.000000] 6 disabled
[ 0.000000] 7 disabled
[ 0.000000] x86/PAT: Configuration [0-7]: WB WC UC- UC WB WC UC- WT
[ 0.000000] e820: last_pfn = 0x7fb17 max_arch_pfn = 0x400000000
[ 0.000000] found SMP MP-table at [mem 0x000f0710-0x000f071f] mapped at [ffff9432800f0710]
[ 0.000000] Base memory trampoline at [ffff943280099000] 99000 size 24576
[ 0.000000] BRK [0x1c5f54000, 0x1c5f54fff] PGTABLE
[ 0.000000] BRK [0x1c5f55000, 0x1c5f55fff] PGTABLE
[ 0.000000] BRK [0x1c5f56000, 0x1c5f56fff] PGTABLE
[ 0.000000] BRK [0x1c5f57000, 0x1c5f57fff] PGTABLE
[ 0.000000] BRK [0x1c5f58000, 0x1c5f58fff] PGTABLE
[ 0.000000] BRK [0x1c5f59000, 0x1c5f59fff] PGTABLE
[ 0.000000] BRK [0x1c5f5a000, 0x1c5f5afff] PGTABLE
[ 0.000000] RAMDISK: [mem 0x356fb000-0x36b74fff]
[ 0.000000] ACPI: Early table checksum verification disabled
[ 0.000000] ACPI: RSDP 0x00000000000F08B0 000024 (v02 CORE )
[ 0.000000] ACPI: XSDT 0x000000007FB280E0 00005C (v01 CORE COREBOOT 00000000 CORE 00000000)
[ 0.000000] ACPI: FACP 0x000000007FB2B760 0000F4 (v03 CORE COREBOOT 00000000 CORE 00000000)
[ 0.000000] ACPI: DSDT 0x000000007FB28280 0034D3 (v03 COREv4 COREBOOT 20090419 INTL 20161222)
[ 0.000000] ACPI: FACS 0x000000007FB28240 000040
[ 0.000000] ACPI: SSDT 0x000000007FB2B860 0005A0 (v02 CORE COREBOOT 0000002A CORE 0000002A)
[ 0.000000] ACPI: MCFG 0x000000007FB2BE00 00003C (v01 CORE COREBOOT 00000000 CORE 00000000)
[ 0.000000] ACPI: TCPA 0x000000007FB2BE40 000032 (v02 CORE COREBOOT 00000000 CORE 00000000)
[ 0.000000] ACPI: APIC 0x000000007FB2BE80 000068 (v01 CORE COREBOOT 00000000 CORE 00000000)
[ 0.000000] ACPI: DMAR 0x000000007FB2BEF0 000078 (v01 CORE COREBOOT 00000000 CORE 00000000)
[ 0.000000] ACPI: HPET 0x000000007FB2BF70 000038 (v01 CORE COREBOOT 00000000 CORE 00000000)
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] No NUMA configuration found
[ 0.000000] Faking a node at [mem 0x0000000000000000-0x000000026fffffff]
[ 0.000000] NODE_DATA(0) allocated [mem 0x26fff6000-0x26fffafff]
[ 0.000000] Zone ranges:
[ 0.000000] DMA [mem 0x0000000000001000-0x0000000000ffffff]
[ 0.000000] DMA32 [mem 0x0000000001000000-0x00000000ffffffff]
[ 0.000000] Normal [mem 0x0000000100000000-0x000000026fffffff]
[ 0.000000] Device empty
[ 0.000000] Movable zone start for each node
[ 0.000000] Early memory node ranges
[ 0.000000] node 0: [mem 0x0000000000001000-0x000000000009ffff]
[ 0.000000] node 0: [mem 0x0000000000100000-0x000000007fb16fff]
[ 0.000000] node 0: [mem 0x0000000100000000-0x000000026fffffff]
[ 0.000000] Initmem setup node 0 [mem 0x0000000000001000-0x000000026fffffff]
[ 0.000000] On node 0 totalpages: 2030262
[ 0.000000] DMA zone: 64 pages used for memmap
[ 0.000000] DMA zone: 22 pages reserved
[ 0.000000] DMA zone: 3999 pages, LIFO batch:0
[ 0.000000] DMA32 zone: 8109 pages used for memmap
[ 0.000000] DMA32 zone: 518935 pages, LIFO batch:31
[ 0.000000] Normal zone: 23552 pages used for memmap
[ 0.000000] Normal zone: 1507328 pages, LIFO batch:31
[ 0.000000] Reserving Intel graphics memory at 0x0000000080000000-0x000000008fffffff
[ 0.000000] ACPI: PM-Timer IO Port: 0x508
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
[ 0.000000] IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-23
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 high edge)
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[ 0.000000] ACPI: IRQ0 used by override.
[ 0.000000] ACPI: IRQ9 used by override.
[ 0.000000] Using ACPI (MADT) for SMP configuration information
[ 0.000000] ACPI: HPET id: 0x8086a301 base: 0xfed00000
[ 0.000000] smpboot: Allowing 2 CPUs, 0 hotplug CPUs
[ 0.000000] PM: Registered nosave memory: [mem 0x00000000-0x00000fff]
[ 0.000000] PM: Registered nosave memory: [mem 0x000a0000-0x000bffff]
[ 0.000000] PM: Registered nosave memory: [mem 0x000c0000-0x000fffff]
[ 0.000000] PM: Registered nosave memory: [mem 0x7fb17000-0x7fbfffff]
[ 0.000000] PM: Registered nosave memory: [mem 0x7fc00000-0x8fffffff]
[ 0.000000] PM: Registered nosave memory: [mem 0x90000000-0xefffffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xf0000000-0xf3ffffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xf4000000-0xffffffff]
[ 0.000000] e820: [mem 0x90000000-0xefffffff] available for PCI devices
[ 0.000000] Booting paravirtualized kernel on bare hardware
[ 0.000000] clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645519600211568 ns
[ 0.000000] setup_percpu: NR_CPUS:512 nr_cpumask_bits:512 nr_cpu_ids:2 nr_node_ids:1
[ 0.000000] percpu: Embedded 38 pages/cpu @ffff9434efc00000 s114776 r8192 d32680 u1048576
[ 0.000000] pcpu-alloc: s114776 r8192 d32680 u1048576 alloc=1*2097152
[ 0.000000] pcpu-alloc: [0] 0 1
[ 0.000000] Built 1 zonelists in Node order, mobility grouping on. Total pages: 1998515
[ 0.000000] Policy zone: Normal
[ 0.000000] Kernel command line: BOOT_IMAGE=/vmlinuz-4.12.0-1-amd64 root=UUID=a994a1c5-a911-48bd-a468-4aa6a9728001 ro quiet iomem=relaxed
[ 0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes)
[ 0.000000] Calgary: detecting Calgary via BIOS EBDA area
[ 0.000000] Calgary: Unable to locate Rio Grande table in EBDA - bailing!
[ 0.000000] Memory: 7890920K/8121048K available (6481K kernel code, 1145K rwdata, 2908K rodata, 1468K init, 704K bss, 230128K reserved, 0K cma-reserved)
[ 0.000000] ftrace: allocating 28155 entries in 110 pages
[ 0.000000] Hierarchical RCU implementation.
[ 0.000000] RCU restricting CPUs from NR_CPUS=512 to nr_cpu_ids=2.
[ 0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=2
[ 0.000000] NR_IRQS:33024 nr_irqs:440 16
[ 0.000000] spurious 8259A interrupt: IRQ7.
[ 0.000000] Console: colour dummy device 80x25
[ 0.000000] console [tty0] enabled
[ 0.000000] clocksource: hpet: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 133484882848 ns
[ 0.000000] hpet clockevent registered
[ 0.000000] tsc: Fast TSC calibration using PIT
[ 0.004000] tsc: Detected 1866.777 MHz processor
[ 0.004000] Calibrating delay loop (skipped), value calculated using timer frequency.. 3733.55 BogoMIPS (lpj=7467108)
[ 0.004000] pid_max: default: 32768 minimum: 301
[ 0.004000] ACPI: Core revision 20170303
[ 0.009324] ACPI: 2 ACPI AML tables successfully acquired and loaded
[ 0.009398] Security Framework initialized
[ 0.009400] Yama: disabled by default; enable with sysctl kernel.yama.*
[ 0.009408] AppArmor: AppArmor disabled by boot time parameter
[ 0.010182] Dentry cache hash table entries: 1048576 (order: 11, 8388608 bytes)
[ 0.013846] Inode-cache hash table entries: 524288 (order: 10, 4194304 bytes)
[ 0.015915] Mount-cache hash table entries: 16384 (order: 5, 131072 bytes)
[ 0.015929] Mountpoint-cache hash table entries: 16384 (order: 5, 131072 bytes)
[ 0.016452] CPU: Physical Processor ID: 0
[ 0.016453] CPU: Processor Core ID: 0
[ 0.016455] mce: CPU supports 6 MCE banks
[ 0.016465] CPU0: Thermal monitoring enabled (TM2)
[ 0.016469] process: using mwait in idle threads
[ 0.016475] Last level iTLB entries: 4KB 128, 2MB 4, 4MB 4
[ 0.016476] Last level dTLB entries: 4KB 256, 2MB 0, 4MB 32, 1GB 0
[ 0.016662] Freeing SMP alternatives memory: 24K
[ 0.020149] smpboot: Max logical packages: 1
[ 0.020158] DMAR: Host address width 36
[ 0.020160] DMAR: DRHD base: 0x000000fed90000 flags: 0x0
[ 0.020173] DMAR: dmar0: reg_base_addr fed90000 ver 1:0 cap c9008020e30260 ecap 1000
[ 0.020174] DMAR: DRHD base: 0x000000fed91000 flags: 0x0
[ 0.020180] DMAR: dmar1: reg_base_addr fed91000 ver 1:0 cap c0000020630260 ecap 1000
[ 0.020181] DMAR: DRHD base: 0x000000fed93000 flags: 0x1
[ 0.020186] DMAR: dmar2: reg_base_addr fed93000 ver 1:0 cap c9008020630260 ecap 1000
[ 0.020571] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=0 pin2=0
[ 0.064000] smpboot: CPU0: Intel(R) Core(TM)2 Duo CPU L9400 @ 1.86GHz (family: 0x6, model: 0x17, stepping: 0x6)
[ 0.064000] Performance Events: PEBS fmt0+, Core2 events, Intel PMU driver.
[ 0.064000] ... version: 2
[ 0.064000] ... bit width: 40
[ 0.064000] ... generic registers: 2
[ 0.064000] ... value mask: 000000ffffffffff
[ 0.064000] ... max period: 000000007fffffff
[ 0.064000] ... fixed-purpose events: 3
[ 0.064000] ... event mask: 0000000700000003
[ 0.064000] smp: Bringing up secondary CPUs ...
[ 0.064000] x86: Booting SMP configuration:
[ 0.064000] .... node #0, CPUs: #1
[ 0.142028] smp: Brought up 1 node, 2 CPUs
[ 0.142028] smpboot: Total of 2 processors activated (7466.96 BogoMIPS)
[ 0.142028] NMI watchdog: enabled on all CPUs, permanently consumes one hw-PMU counter.
[ 0.144096] sched_clock: Marking stable (144000000, 0)->(253224415, -109224415)
[ 0.144628] devtmpfs: initialized
[ 0.144716] x86/mm: Memory block size: 128MB
[ 0.150100] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns
[ 0.150109] futex hash table entries: 512 (order: 3, 32768 bytes)
[ 0.150171] pinctrl core: initialized pinctrl subsystem
[ 0.150336] NET: Registered protocol family 16
[ 0.150647] cpuidle: using governor ladder
[ 0.150686] cpuidle: using governor menu
[ 0.150689] PCCT header not found.
[ 0.150728] ACPI: bus type PCI registered
[ 0.150729] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
[ 0.150816] PCI: MMCONFIG for domain 0000 [bus 00-3f] at [mem 0xf0000000-0xf3ffffff] (base 0xf0000000)
[ 0.150819] PCI: MMCONFIG at [mem 0xf0000000-0xf3ffffff] reserved in E820
[ 0.150830] PCI: Using configuration type 1 for base access
[ 0.152474] HugeTLB registered 2 MB page size, pre-allocated 0 pages
[ 0.152779] ACPI: Added _OSI(Module Device)
[ 0.152780] ACPI: Added _OSI(Processor Device)
[ 0.152782] ACPI: Added _OSI(3.0 _SCP Extensions)
[ 0.152783] ACPI: Added _OSI(Processor Aggregator Device)
[ 0.152989] ACPI: Executed 1 blocks of module-level executable AML code
[ 0.154561] ACPI: [Firmware Bug]: BIOS _OSI(Linux) query ignored
[ 0.156069] ACPI : EC: EC started
[ 0.156071] ACPI : EC: interrupt blocked
[ 0.156171] ACPI: \_SB_.PCI0.LPCB.EC__: Used as first EC
[ 0.156175] ACPI: \_SB_.PCI0.LPCB.EC__: GPE=0x11, EC_CMD/EC_SC=0x66, EC_DATA=0x62
[ 0.156177] ACPI: \_SB_.PCI0.LPCB.EC__: Used as boot DSDT EC to handle transactions
[ 0.156178] ACPI: Interpreter enabled
[ 0.156205] ACPI: (supports S0 S3 S4 S5)
[ 0.156206] ACPI: Using IOAPIC for interrupt routing
[ 0.156239] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
[ 0.169830] acpi ACPI0003:01: ACPI dock station (docks/bays count: 1)
[ 0.170310] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
[ 0.170316] acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI]
[ 0.170390] acpi PNP0A08:00: _OSC: OS now controls [PCIeHotplug PME AER PCIeCapability]
[ 0.170403] acpi PNP0A08:00: [Firmware Info]: MMCONFIG for domain 0000 [bus 00-3f] only partially covers this bridge
[ 0.170476] acpi PNP0A08:00: ignoring host bridge window [mem 0x000c4000-0x000c7fff window] (conflicts with Video ROM [mem 0x000c0000-0x000c67ff])
[ 0.170781] PCI host bridge to bus 0000:00
[ 0.170784] pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7 window]
[ 0.170786] pci_bus 0000:00: root bus resource [io 0x0d00-0xffff window]
[ 0.170788] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff window]
[ 0.170790] pci_bus 0000:00: root bus resource [mem 0x000c0000-0x000c3fff window]
[ 0.170792] pci_bus 0000:00: root bus resource [mem 0x000c8000-0x000cbfff window]
[ 0.170794] pci_bus 0000:00: root bus resource [mem 0x000cc000-0x000cffff window]
[ 0.170797] pci_bus 0000:00: root bus resource [mem 0x000d0000-0x000d3fff window]
[ 0.170799] pci_bus 0000:00: root bus resource [mem 0x000d4000-0x000d7fff window]
[ 0.170801] pci_bus 0000:00: root bus resource [mem 0x000d8000-0x000dbfff window]
[ 0.170803] pci_bus 0000:00: root bus resource [mem 0x000dc000-0x000dffff window]
[ 0.170805] pci_bus 0000:00: root bus resource [mem 0x000e0000-0x000e3fff window]
[ 0.170807] pci_bus 0000:00: root bus resource [mem 0x000e4000-0x000e7fff window]
[ 0.170809] pci_bus 0000:00: root bus resource [mem 0x000e8000-0x000ebfff window]
[ 0.170811] pci_bus 0000:00: root bus resource [mem 0x000ec000-0x000effff window]
[ 0.170813] pci_bus 0000:00: root bus resource [mem 0x000f0000-0x000fffff window]
[ 0.170815] pci_bus 0000:00: root bus resource [mem 0x90000000-0xfebfffff window]
[ 0.170818] pci_bus 0000:00: root bus resource [mem 0xfed40000-0xfed44fff window]
[ 0.170820] pci_bus 0000:00: root bus resource [bus 00-ff]
[ 0.170831] pci 0000:00:00.0: [8086:2a40] type 00 class 0x060000
[ 0.170861] DMAR: Forcing write-buffer flush capability
[ 0.170862] DMAR: Disabling IOMMU for graphics on this chipset
[ 0.170991] pci 0000:00:02.0: [8086:2a42] type 00 class 0x030000
[ 0.171005] pci 0000:00:02.0: reg 0x10: [mem 0xe1400000-0xe17fffff 64bit]
[ 0.171014] pci 0000:00:02.0: reg 0x18: [mem 0xd0000000-0xdfffffff 64bit pref]
[ 0.171021] pci 0000:00:02.0: reg 0x20: [io 0x3400-0x3407]
[ 0.171161] pci 0000:00:02.1: [8086:2a43] type 00 class 0x038000
[ 0.171173] pci 0000:00:02.1: reg 0x10: [mem 0xe1800000-0xe18fffff 64bit]
[ 0.171361] pci 0000:00:19.0: [8086:10f5] type 00 class 0x020000
[ 0.171385] pci 0000:00:19.0: reg 0x10: [mem 0xe1b00000-0xe1b1ffff]
[ 0.171397] pci 0000:00:19.0: reg 0x14: [mem 0xe1b24000-0xe1b24fff]
[ 0.171410] pci 0000:00:19.0: reg 0x18: [io 0x3000-0x301f]
[ 0.171504] pci 0000:00:19.0: PME# supported from D0 D3hot D3cold
[ 0.171623] pci 0000:00:1a.0: [8086:2937] type 00 class 0x0c0300
[ 0.171683] pci 0000:00:1a.0: reg 0x20: [io 0x3020-0x303f]
[ 0.171828] pci 0000:00:1a.0: System wakeup disabled by ACPI
[ 0.171887] pci 0000:00:1a.1: [8086:2938] type 00 class 0x0c0300
[ 0.171947] pci 0000:00:1a.1: reg 0x20: [io 0x3040-0x305f]
[ 0.172091] pci 0000:00:1a.1: System wakeup disabled by ACPI
[ 0.172151] pci 0000:00:1a.2: [8086:2939] type 00 class 0x0c0300
[ 0.172211] pci 0000:00:1a.2: reg 0x20: [io 0x3060-0x307f]
[ 0.172356] pci 0000:00:1a.2: System wakeup disabled by ACPI
[ 0.172422] pci 0000:00:1a.7: [8086:293c] type 00 class 0x0c0320
[ 0.172446] pci 0000:00:1a.7: reg 0x10: [mem 0xe1b26000-0xe1b263ff]
[ 0.172560] pci 0000:00:1a.7: PME# supported from D0 D3hot D3cold
[ 0.172636] pci 0000:00:1a.7: System wakeup disabled by ACPI
[ 0.172697] pci 0000:00:1b.0: [8086:293e] type 00 class 0x040300
[ 0.172725] pci 0000:00:1b.0: reg 0x10: [mem 0xe1b20000-0xe1b23fff 64bit]
[ 0.172840] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
[ 0.172924] pci 0000:00:1b.0: System wakeup disabled by ACPI
[ 0.172985] pci 0000:00:1c.0: [8086:2940] type 01 class 0x060400
[ 0.173094] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
[ 0.173232] pci 0000:00:1c.1: [8086:2942] type 01 class 0x060400
[ 0.173348] pci 0000:00:1c.1: PME# supported from D0 D3hot D3cold
[ 0.173495] pci 0000:00:1c.2: [8086:2944] type 01 class 0x060400
[ 0.173613] pci 0000:00:1c.2: PME# supported from D0 D3hot D3cold
[ 0.173755] pci 0000:00:1c.3: [8086:2946] type 01 class 0x060400
[ 0.173873] pci 0000:00:1c.3: PME# supported from D0 D3hot D3cold
[ 0.174015] pci 0000:00:1d.0: [8086:2934] type 00 class 0x0c0300
[ 0.174075] pci 0000:00:1d.0: reg 0x20: [io 0x3080-0x309f]
[ 0.174220] pci 0000:00:1d.0: System wakeup disabled by ACPI
[ 0.174276] pci 0000:00:1d.1: [8086:2935] type 00 class 0x0c0300
[ 0.174336] pci 0000:00:1d.1: reg 0x20: [io 0x30a0-0x30bf]
[ 0.174482] pci 0000:00:1d.1: System wakeup disabled by ACPI
[ 0.174538] pci 0000:00:1d.2: [8086:2936] type 00 class 0x0c0300
[ 0.174598] pci 0000:00:1d.2: reg 0x20: [io 0x30c0-0x30df]
[ 0.174742] pci 0000:00:1d.2: System wakeup disabled by ACPI
[ 0.174808] pci 0000:00:1d.7: [8086:293a] type 00 class 0x0c0320
[ 0.174832] pci 0000:00:1d.7: reg 0x10: [mem 0xe1b27000-0xe1b273ff]
[ 0.174946] pci 0000:00:1d.7: PME# supported from D0 D3hot D3cold
[ 0.175022] pci 0000:00:1d.7: System wakeup disabled by ACPI
[ 0.175078] pci 0000:00:1e.0: [8086:2448] type 01 class 0x060401
[ 0.175264] pci 0000:00:1f.0: [8086:2917] type 00 class 0x060100
[ 0.175530] pci 0000:00:1f.2: [8086:2929] type 00 class 0x010601
[ 0.175555] pci 0000:00:1f.2: reg 0x10: [io 0x3408-0x340f]
[ 0.175567] pci 0000:00:1f.2: reg 0x14: [io 0x3418-0x341b]
[ 0.175579] pci 0000:00:1f.2: reg 0x18: [io 0x3410-0x3417]
[ 0.175591] pci 0000:00:1f.2: reg 0x1c: [io 0x341c-0x341f]
[ 0.175603] pci 0000:00:1f.2: reg 0x20: [io 0x30e0-0x30ff]
[ 0.175616] pci 0000:00:1f.2: reg 0x24: [mem 0xe1b25000-0xe1b257ff]
[ 0.175685] pci 0000:00:1f.2: PME# supported from D3hot
[ 0.175812] pci 0000:00:1f.3: [8086:2930] type 00 class 0x0c0500
[ 0.175835] pci 0000:00:1f.3: reg 0x10: [mem 0xe1b28000-0xe1b280ff 64bit]
[ 0.175867] pci 0000:00:1f.3: reg 0x20: [io 0x0400-0x041f]
[ 0.176075] pci 0000:00:1c.0: PCI bridge to [bus 01]
[ 0.176187] pci 0000:02:00.0: [168c:0030] type 00 class 0x028000
[ 0.176250] pci 0000:02:00.0: reg 0x10: [mem 0xe1900000-0xe191ffff 64bit]
[ 0.176371] pci 0000:02:00.0: reg 0x30: [mem 0xe1920000-0xe192ffff pref]
[ 0.176524] pci 0000:02:00.0: supports D1
[ 0.176526] pci 0000:02:00.0: PME# supported from D0 D1 D3hot
[ 0.185505] pci 0000:00:1c.1: PCI bridge to [bus 02]
[ 0.185514] pci 0000:00:1c.1: bridge window [mem 0xe1900000-0xe19fffff]
[ 0.185622] pci 0000:03:00.0: [168c:0030] type 00 class 0x028000
[ 0.185683] pci 0000:03:00.0: reg 0x10: [mem 0xe1a00000-0xe1a1ffff 64bit]
[ 0.185801] pci 0000:03:00.0: reg 0x30: [mem 0xe1a20000-0xe1a2ffff pref]
[ 0.185954] pci 0000:03:00.0: supports D1
[ 0.185956] pci 0000:03:00.0: PME# supported from D0 D1 D3hot
[ 0.197503] pci 0000:00:1c.2: PCI bridge to [bus 03]
[ 0.197511] pci 0000:00:1c.2: bridge window [mem 0xe1a00000-0xe1afffff]
[ 0.197625] acpiphp: Slot [1] registered
[ 0.197664] pci 0000:04:00.0: [1b21:1042] type 00 class 0x0c0330
[ 0.197713] pci 0000:04:00.0: reg 0x10: [mem 0xe0800000-0xe0807fff 64bit]
[ 0.197940] pci 0000:04:00.0: PME# supported from D3hot
[ 0.209496] pci 0000:00:1c.3: PCI bridge to [bus 04]
[ 0.209501] pci 0000:00:1c.3: bridge window [io 0x2000-0x2fff]
[ 0.209506] pci 0000:00:1c.3: bridge window [mem 0xe0000000-0xe08fffff]
[ 0.209514] pci 0000:00:1c.3: bridge window [mem 0xe0c00000-0xe13fffff 64bit pref]
[ 0.209701] pci 0000:00:1e.0: PCI bridge to [bus 05] (subtractive decode)
[ 0.209716] pci 0000:00:1e.0: bridge window [io 0x0000-0x0cf7 window] (subtractive decode)
[ 0.209718] pci 0000:00:1e.0: bridge window [io 0x0d00-0xffff window] (subtractive decode)
[ 0.209721] pci 0000:00:1e.0: bridge window [mem 0x000a0000-0x000bffff window] (subtractive decode)
[ 0.209723] pci 0000:00:1e.0: bridge window [mem 0x000c0000-0x000c3fff window] (subtractive decode)
[ 0.209725] pci 0000:00:1e.0: bridge window [mem 0x000c8000-0x000cbfff window] (subtractive decode)
[ 0.209727] pci 0000:00:1e.0: bridge window [mem 0x000cc000-0x000cffff window] (subtractive decode)
[ 0.209730] pci 0000:00:1e.0: bridge window [mem 0x000d0000-0x000d3fff window] (subtractive decode)
[ 0.209732] pci 0000:00:1e.0: bridge window [mem 0x000d4000-0x000d7fff window] (subtractive decode)
[ 0.209734] pci 0000:00:1e.0: bridge window [mem 0x000d8000-0x000dbfff window] (subtractive decode)
[ 0.209736] pci 0000:00:1e.0: bridge window [mem 0x000dc000-0x000dffff window] (subtractive decode)
[ 0.209739] pci 0000:00:1e.0: bridge window [mem 0x000e0000-0x000e3fff window] (subtractive decode)
[ 0.209741] pci 0000:00:1e.0: bridge window [mem 0x000e4000-0x000e7fff window] (subtractive decode)
[ 0.209743] pci 0000:00:1e.0: bridge window [mem 0x000e8000-0x000ebfff window] (subtractive decode)
[ 0.209745] pci 0000:00:1e.0: bridge window [mem 0x000ec000-0x000effff window] (subtractive decode)
[ 0.209748] pci 0000:00:1e.0: bridge window [mem 0x000f0000-0x000fffff window] (subtractive decode)
[ 0.209750] pci 0000:00:1e.0: bridge window [mem 0x90000000-0xfebfffff window] (subtractive decode)
[ 0.209752] pci 0000:00:1e.0: bridge window [mem 0xfed40000-0xfed44fff window] (subtractive decode)
[ 0.209966] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 10 12 14 15) *11
[ 0.210054] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 *11 12 14 15)
[ 0.210140] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 7 10 12 14 15) *11
[ 0.210228] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 *11 12 14 15)
[ 0.210314] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 10 12 14 15) *0, disabled.
[ 0.210400] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 11 12 14 15) *0, disabled.
[ 0.210486] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 7 10 12 14 15) *0, disabled.
[ 0.210571] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 7 11 12 14 15) *0, disabled.
[ 0.212483] ACPI: Enabled 1 GPEs in block 00 to 3F
[ 0.212634] ACPI : EC: interrupt unblocked
[ 0.212645] ACPI : EC: event unblocked
[ 0.212663] ACPI: \_SB_.PCI0.LPCB.EC__: GPE=0x11, EC_CMD/EC_SC=0x66, EC_DATA=0x62
[ 0.212666] ACPI: \_SB_.PCI0.LPCB.EC__: Used as boot DSDT EC to handle transactions and events
[ 0.212855] pci 0000:00:02.0: vgaarb: setting as boot VGA device
[ 0.212858] pci 0000:00:02.0: vgaarb: VGA device added: decodes=io+mem,owns=io+mem,locks=none
[ 0.212867] pci 0000:00:02.0: vgaarb: bridge control possible
[ 0.212868] vgaarb: loaded
[ 0.212931] EDAC MC: Ver: 3.0.0
[ 0.213201] PCI: Using ACPI for IRQ routing
[ 0.215708] PCI: pci_cache_line_size set to 64 bytes
[ 0.215812] e820: reserve RAM buffer [mem 0x7fb17000-0x7fffffff]
[ 0.216013] HPET: 4 timers in total, 0 timers will be used for per-cpu timer
[ 0.216019] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0
[ 0.216025] hpet0: 4 comparators, 64-bit 14.318180 MHz counter
[ 0.218074] clocksource: Switched to clocksource hpet
[ 0.236016] VFS: Disk quotas dquot_6.6.0
[ 0.236049] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[ 0.236177] pnp: PnP ACPI init
[ 0.236350] system 00:00: [mem 0xfed1c000-0xfed1ffff] has been reserved
[ 0.236353] system 00:00: [mem 0xfed14000-0xfed17fff] has been reserved
[ 0.236356] system 00:00: [mem 0xfed18000-0xfed18fff] has been reserved
[ 0.236358] system 00:00: [mem 0xfed19000-0xfed19fff] has been reserved
[ 0.236361] system 00:00: [mem 0xf0000000-0xf3ffffff] has been reserved
[ 0.236363] system 00:00: [mem 0xfed20000-0xfed3ffff] has been reserved
[ 0.236366] system 00:00: [mem 0xfed40000-0xfed44fff] has been reserved
[ 0.236368] system 00:00: [mem 0xfed45000-0xfed8ffff] has been reserved
[ 0.236374] system 00:00: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.237061] system 00:01: [mem 0xfed00000-0xfed003ff] has been reserved
[ 0.237066] system 00:01: Plug and Play ACPI device, IDs PNP0103 PNP0c01 (active)
[ 0.237150] system 00:02: [io 0x0800-0x080f] has been reserved
[ 0.237152] system 00:02: [io 0x0500-0x057f] has been reserved
[ 0.237155] system 00:02: [io 0x0580-0x05bf] has been reserved
[ 0.237159] system 00:02: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.237198] pnp 00:03: Plug and Play ACPI device, IDs PNP0b00 (active)
[ 0.237256] pnp 00:04: Plug and Play ACPI device, IDs PNP0303 PNP030b (active)
[ 0.237305] pnp 00:05: Plug and Play ACPI device, IDs PNP0f13 (active)
[ 0.237461] pnp: PnP ACPI: found 6 devices
[ 0.245023] clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns
[ 0.245087] pci 0000:00:1c.0: PCI bridge to [bus 01]
[ 0.245104] pci 0000:00:1c.1: PCI bridge to [bus 02]
[ 0.245111] pci 0000:00:1c.1: bridge window [mem 0xe1900000-0xe19fffff]
[ 0.245122] pci 0000:00:1c.2: PCI bridge to [bus 03]
[ 0.245129] pci 0000:00:1c.2: bridge window [mem 0xe1a00000-0xe1afffff]
[ 0.245140] pci 0000:00:1c.3: PCI bridge to [bus 04]
[ 0.245143] pci 0000:00:1c.3: bridge window [io 0x2000-0x2fff]
[ 0.245150] pci 0000:00:1c.3: bridge window [mem 0xe0000000-0xe08fffff]
[ 0.245155] pci 0000:00:1c.3: bridge window [mem 0xe0c00000-0xe13fffff 64bit pref]
[ 0.245163] pci 0000:00:1e.0: PCI bridge to [bus 05]
[ 0.245179] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7 window]
[ 0.245181] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff window]
[ 0.245184] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff window]
[ 0.245186] pci_bus 0000:00: resource 7 [mem 0x000c0000-0x000c3fff window]
[ 0.245188] pci_bus 0000:00: resource 8 [mem 0x000c8000-0x000cbfff window]
[ 0.245190] pci_bus 0000:00: resource 9 [mem 0x000cc000-0x000cffff window]
[ 0.245192] pci_bus 0000:00: resource 10 [mem 0x000d0000-0x000d3fff window]
[ 0.245194] pci_bus 0000:00: resource 11 [mem 0x000d4000-0x000d7fff window]
[ 0.245196] pci_bus 0000:00: resource 12 [mem 0x000d8000-0x000dbfff window]
[ 0.245198] pci_bus 0000:00: resource 13 [mem 0x000dc000-0x000dffff window]
[ 0.245200] pci_bus 0000:00: resource 14 [mem 0x000e0000-0x000e3fff window]
[ 0.245202] pci_bus 0000:00: resource 15 [mem 0x000e4000-0x000e7fff window]
[ 0.245204] pci_bus 0000:00: resource 16 [mem 0x000e8000-0x000ebfff window]
[ 0.245206] pci_bus 0000:00: resource 17 [mem 0x000ec000-0x000effff window]
[ 0.245209] pci_bus 0000:00: resource 18 [mem 0x000f0000-0x000fffff window]
[ 0.245211] pci_bus 0000:00: resource 19 [mem 0x90000000-0xfebfffff window]
[ 0.245213] pci_bus 0000:00: resource 20 [mem 0xfed40000-0xfed44fff window]
[ 0.245216] pci_bus 0000:02: resource 1 [mem 0xe1900000-0xe19fffff]
[ 0.245218] pci_bus 0000:03: resource 1 [mem 0xe1a00000-0xe1afffff]
[ 0.245220] pci_bus 0000:04: resource 0 [io 0x2000-0x2fff]
[ 0.245223] pci_bus 0000:04: resource 1 [mem 0xe0000000-0xe08fffff]
[ 0.245225] pci_bus 0000:04: resource 2 [mem 0xe0c00000-0xe13fffff 64bit pref]
[ 0.245227] pci_bus 0000:05: resource 4 [io 0x0000-0x0cf7 window]
[ 0.245229] pci_bus 0000:05: resource 5 [io 0x0d00-0xffff window]
[ 0.245231] pci_bus 0000:05: resource 6 [mem 0x000a0000-0x000bffff window]
[ 0.245233] pci_bus 0000:05: resource 7 [mem 0x000c0000-0x000c3fff window]
[ 0.245235] pci_bus 0000:05: resource 8 [mem 0x000c8000-0x000cbfff window]
[ 0.245238] pci_bus 0000:05: resource 9 [mem 0x000cc000-0x000cffff window]
[ 0.245240] pci_bus 0000:05: resource 10 [mem 0x000d0000-0x000d3fff window]
[ 0.245242] pci_bus 0000:05: resource 11 [mem 0x000d4000-0x000d7fff window]
[ 0.245244] pci_bus 0000:05: resource 12 [mem 0x000d8000-0x000dbfff window]
[ 0.245246] pci_bus 0000:05: resource 13 [mem 0x000dc000-0x000dffff window]
[ 0.245248] pci_bus 0000:05: resource 14 [mem 0x000e0000-0x000e3fff window]
[ 0.245250] pci_bus 0000:05: resource 15 [mem 0x000e4000-0x000e7fff window]
[ 0.245252] pci_bus 0000:05: resource 16 [mem 0x000e8000-0x000ebfff window]
[ 0.245254] pci_bus 0000:05: resource 17 [mem 0x000ec000-0x000effff window]
[ 0.245256] pci_bus 0000:05: resource 18 [mem 0x000f0000-0x000fffff window]
[ 0.245258] pci_bus 0000:05: resource 19 [mem 0x90000000-0xfebfffff window]
[ 0.245261] pci_bus 0000:05: resource 20 [mem 0xfed40000-0xfed44fff window]
[ 0.245389] NET: Registered protocol family 2
[ 0.245666] TCP established hash table entries: 65536 (order: 7, 524288 bytes)
[ 0.245955] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
[ 0.246415] TCP: Hash tables configured (established 65536 bind 65536)
[ 0.246480] UDP hash table entries: 4096 (order: 5, 131072 bytes)
[ 0.246550] UDP-Lite hash table entries: 4096 (order: 5, 131072 bytes)
[ 0.246663] NET: Registered protocol family 1
[ 0.246684] pci 0000:00:02.0: Video device with shadowed ROM at [mem 0x000c0000-0x000dffff]
[ 0.249255] PCI: CLS 64 bytes, default 64
[ 0.249312] Unpacking initramfs...
[ 0.850662] Freeing initrd memory: 20968K
[ 0.850782] PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
[ 0.850787] software IO TLB [mem 0x7bb17000-0x7fb17000] (64MB) mapped at [ffff9432fbb17000-ffff9432ffb16fff]
[ 0.851322] audit: initializing netlink subsys (disabled)
[ 0.851428] audit: type=2000 audit(1506952359.853:1): state=initialized audit_enabled=0 res=1
[ 0.851935] workingset: timestamp_bits=40 max_order=21 bucket_order=0
[ 0.851966] zbud: loaded
[ 1.527660] Key type asymmetric registered
[ 1.527662] Asymmetric key parser 'x509' registered
[ 1.527678] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 249)
[ 1.527718] io scheduler noop registered
[ 1.527719] io scheduler deadline registered
[ 1.527734] io scheduler cfq registered (default)
[ 1.527735] io scheduler mq-deadline registered
[ 1.528975] pcieport 0000:00:1c.0: Signaling PME with IRQ 24
[ 1.529015] pcieport 0000:00:1c.1: Signaling PME with IRQ 25
[ 1.529044] pcieport 0000:00:1c.2: Signaling PME with IRQ 26
[ 1.529072] pcieport 0000:00:1c.3: Signaling PME with IRQ 27
[ 1.529115] efifb: probing for efifb
[ 1.529134] efifb: framebuffer at 0xd0000000, using 5120k, total 5120k
[ 1.529135] efifb: mode is 1440x900x32, linelength=5760, pages=1
[ 1.529136] efifb: scrolling: redraw
[ 1.529138] efifb: Truecolor: size=8:8:8:8, shift=24:16:8:0
[ 1.533764] Console: switching to colour frame buffer device 180x56
[ 1.538202] fb0: EFI VGA frame buffer device
[ 1.538213] intel_idle: does not run on family 6 model 23
[ 1.546487] Monitor-Mwait will be used to enter C-1 state
[ 1.546501] Monitor-Mwait will be used to enter C-2 state
[ 1.546511] Monitor-Mwait will be used to enter C-3 state
[ 1.546520] sched_clock: Marking unstable (1548476617, -1961858)<-(1655739174, -109224415)
[ 1.546524] tsc: Marking TSC unstable due to TSC halts in idle
[ 1.546892] GHES: HEST is not enabled!
[ 1.547014] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
[ 1.547742] Linux agpgart interface v0.103
[ 1.547960] AMD IOMMUv2 driver by Joerg Roedel <jroedel@suse.de>
[ 1.547961] AMD IOMMUv2 functionality not available on this system
[ 1.548229] i8042: PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at 0x60,0x64 irq 1,12
[ 1.559981] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 1.559987] serio: i8042 AUX port at 0x60,0x64 irq 12
[ 1.560210] mousedev: PS/2 mouse device common for all mice
[ 1.560273] rtc_cmos 00:03: RTC can wake from S4
[ 1.560464] rtc_cmos 00:03: rtc core: registered rtc_cmos as rtc0
[ 1.560496] rtc_cmos 00:03: alarms up to one month, y3k, 242 bytes nvram, hpet irqs
[ 1.560547] ledtrig-cpu: registered to indicate activity on CPUs
[ 1.560803] NET: Registered protocol family 10
[ 1.561106] Segment Routing with IPv6
[ 1.561141] mip6: Mobile IPv6
[ 1.561144] NET: Registered protocol family 17
[ 1.561146] mpls_gso: MPLS GSO support
[ 1.561364] microcode: sig=0x10676, pf=0x80, revision=0x0
[ 1.561420] microcode: Microcode Update Driver: v2.2.
[ 1.561621] registered taskstats version 1
[ 1.561642] zswap: loaded using pool lzo/zbud
[ 1.561777] ima: No TPM chip found, activating TPM-bypass! (rc=-19)
[ 1.562310] rtc_cmos 00:03: setting system clock to 2017-10-02 13:52:40 UTC (1506952360)
[ 1.562348] PM: Hibernation image not present or could not be loaded.
[ 1.565143] Freeing unused kernel memory: 1468K
[ 1.565144] Write protecting the kernel read-only data: 12288k
[ 1.566098] Freeing unused kernel memory: 1696K
[ 1.567064] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input0
[ 1.570912] Freeing unused kernel memory: 1188K
[ 1.573319] x86/mm: Checked W+X mappings: passed, no W+X pages found.
[ 1.803616] pps_core: LinuxPPS API ver. 1 registered
[ 1.803618] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it>
[ 1.803965] PTP clock support registered
[ 1.809163] e1000e: Intel(R) PRO/1000 Network Driver - 3.2.6-k
[ 1.809164] e1000e: Copyright(c) 1999 - 2015 Intel Corporation.
[ 1.809435] e1000e 0000:00:19.0: Interrupt Throttling Rate (ints/sec) set to dynamic conservative mode
[ 1.811365] (NULL device *): hwmon_device_register() is deprecated. Please convert the driver to use hwmon_device_register_with_info().
[ 1.811553] thermal LNXTHERM:00: registered as thermal_zone0
[ 1.811555] ACPI: Thermal Zone [THM0] (58 C)
[ 1.812217] thermal LNXTHERM:01: registered as thermal_zone1
[ 1.812219] ACPI: Thermal Zone [THM1] (48 C)
[ 1.815345] ACPI: bus type USB registered
[ 1.815379] usbcore: registered new interface driver usbfs
[ 1.815394] usbcore: registered new interface driver hub
[ 1.817187] usbcore: registered new device driver usb
[ 1.817977] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 1.818441] uhci_hcd: USB Universal Host Controller Interface driver
[ 1.818934] ehci-pci: EHCI PCI platform driver
[ 1.828180] xhci_hcd 0000:04:00.0: xHCI Host Controller
[ 1.828195] xhci_hcd 0000:04:00.0: new USB bus registered, assigned bus number 1
[ 1.837958] xhci_hcd 0000:04:00.0: hcc params 0x0200f180 hci version 0x96 quirks 0x00080000
[ 1.838186] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
[ 1.838188] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.838191] usb usb1: Product: xHCI Host Controller
[ 1.838193] usb usb1: Manufacturer: Linux 4.12.0-1-amd64 xhci-hcd
[ 1.838195] usb usb1: SerialNumber: 0000:04:00.0
[ 1.838368] hub 1-0:1.0: USB hub found
[ 1.838385] hub 1-0:1.0: 2 ports detected
[ 1.838537] xhci_hcd 0000:04:00.0: xHCI Host Controller
[ 1.838543] xhci_hcd 0000:04:00.0: new USB bus registered, assigned bus number 2
[ 1.838574] usb usb2: We don't know the algorithms for LPM for this host, disabling LPM.
[ 1.838604] usb usb2: New USB device found, idVendor=1d6b, idProduct=0003
[ 1.838606] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.838608] usb usb2: Product: xHCI Host Controller
[ 1.838610] usb usb2: Manufacturer: Linux 4.12.0-1-amd64 xhci-hcd
[ 1.838612] usb usb2: SerialNumber: 0000:04:00.0
[ 1.838755] hub 2-0:1.0: USB hub found
[ 1.838769] hub 2-0:1.0: 2 ports detected
[ 1.839134] SCSI subsystem initialized
[ 1.841466] libata version 3.00 loaded.
[ 1.882063] clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x35d1268fe91, max_idle_ns: 881590610785 ns
[ 2.012638] e1000e 0000:00:19.0 eth0: (PCI Express:2.5GT/s:Width x1) 00:1f:16:18:ee:48
[ 2.012641] e1000e 0000:00:19.0 eth0: Intel(R) PRO/1000 Network Connection
[ 2.012670] e1000e 0000:00:19.0 eth0: MAC: 7, PHY: 8, PBA No: FFFFFF-0FF
[ 2.012869] uhci_hcd 0000:00:1a.0: UHCI Host Controller
[ 2.012878] uhci_hcd 0000:00:1a.0: new USB bus registered, assigned bus number 3
[ 2.012887] uhci_hcd 0000:00:1a.0: detected 2 ports
[ 2.012924] uhci_hcd 0000:00:1a.0: irq 16, io base 0x00003020
[ 2.013050] usb usb3: New USB device found, idVendor=1d6b, idProduct=0001
[ 2.013053] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 2.013055] usb usb3: Product: UHCI Host Controller
[ 2.013057] usb usb3: Manufacturer: Linux 4.12.0-1-amd64 uhci_hcd
[ 2.013059] usb usb3: SerialNumber: 0000:00:1a.0
[ 2.013223] hub 3-0:1.0: USB hub found
[ 2.013238] hub 3-0:1.0: 2 ports detected
[ 2.013521] uhci_hcd 0000:00:1a.1: UHCI Host Controller
[ 2.013529] uhci_hcd 0000:00:1a.1: new USB bus registered, assigned bus number 4
[ 2.013537] uhci_hcd 0000:00:1a.1: detected 2 ports
[ 2.013567] uhci_hcd 0000:00:1a.1: irq 17, io base 0x00003040
[ 2.013646] usb usb4: New USB device found, idVendor=1d6b, idProduct=0001
[ 2.013649] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 2.013651] usb usb4: Product: UHCI Host Controller
[ 2.013653] usb usb4: Manufacturer: Linux 4.12.0-1-amd64 uhci_hcd
[ 2.013655] usb usb4: SerialNumber: 0000:00:1a.1
[ 2.013815] hub 4-0:1.0: USB hub found
[ 2.013825] hub 4-0:1.0: 2 ports detected
[ 2.014363] ehci-pci 0000:00:1a.7: EHCI Host Controller
[ 2.014370] ehci-pci 0000:00:1a.7: new USB bus registered, assigned bus number 5
[ 2.014386] ehci-pci 0000:00:1a.7: debug port 1
[ 2.018312] ehci-pci 0000:00:1a.7: cache line size of 64 is not supported
[ 2.018324] ehci-pci 0000:00:1a.7: irq 18, io mem 0xe1b26000
[ 2.034137] ehci-pci 0000:00:1a.7: USB 2.0 started, EHCI 1.00
[ 2.034210] usb usb5: New USB device found, idVendor=1d6b, idProduct=0002
[ 2.034213] usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 2.034215] usb usb5: Product: EHCI Host Controller
[ 2.034217] usb usb5: Manufacturer: Linux 4.12.0-1-amd64 ehci_hcd
[ 2.034219] usb usb5: SerialNumber: 0000:00:1a.7
[ 2.034402] hub 5-0:1.0: USB hub found
[ 2.034412] hub 5-0:1.0: 6 ports detected
[ 2.062166] hub 3-0:1.0: USB hub found
[ 2.062176] hub 3-0:1.0: 2 ports detected
[ 2.090191] hub 4-0:1.0: USB hub found
[ 2.090200] hub 4-0:1.0: 2 ports detected
[ 2.090439] ehci-pci 0000:00:1d.7: EHCI Host Controller
[ 2.090447] ehci-pci 0000:00:1d.7: new USB bus registered, assigned bus number 6
[ 2.090460] ehci-pci 0000:00:1d.7: debug port 1
[ 2.094361] ehci-pci 0000:00:1d.7: cache line size of 64 is not supported
[ 2.094366] ehci-pci 0000:00:1d.7: irq 16, io mem 0xe1b27000
[ 2.110110] ehci-pci 0000:00:1d.7: USB 2.0 started, EHCI 1.00
[ 2.110161] usb usb6: New USB device found, idVendor=1d6b, idProduct=0002
[ 2.110164] usb usb6: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 2.110166] usb usb6: Product: EHCI Host Controller
[ 2.110168] usb usb6: Manufacturer: Linux 4.12.0-1-amd64 ehci_hcd
[ 2.110170] usb usb6: SerialNumber: 0000:00:1d.7
[ 2.110355] hub 6-0:1.0: USB hub found
[ 2.110364] hub 6-0:1.0: 6 ports detected
[ 2.110867] i801_smbus 0000:00:1f.3: SMBus using PCI interrupt
[ 2.111852] ahci 0000:00:1f.2: version 3.0
[ 2.112068] ahci 0000:00:1f.2: SSS flag set, parallel bus scan disabled
[ 2.112098] ahci 0000:00:1f.2: AHCI 0001.0200 32 slots 4 ports 3 Gbps 0x3 impl SATA mode
[ 2.112101] ahci 0000:00:1f.2: flags: 64bit ncq sntf ilck stag pm led clo pio slum part ccc
[ 2.113133] scsi host0: ahci
[ 2.113412] scsi host1: ahci
[ 2.113551] scsi host2: ahci
[ 2.113685] scsi host3: ahci
[ 2.113758] ata1: SATA max UDMA/133 abar m2048@0xe1b25000 port 0xe1b25100 irq 32
[ 2.113761] ata2: SATA max UDMA/133 abar m2048@0xe1b25000 port 0xe1b25180 irq 32
[ 2.113762] ata3: DUMMY
[ 2.113764] ata4: DUMMY
[ 2.113948] uhci_hcd 0000:00:1a.2: UHCI Host Controller
[ 2.113958] uhci_hcd 0000:00:1a.2: new USB bus registered, assigned bus number 7
[ 2.113968] uhci_hcd 0000:00:1a.2: detected 2 ports
[ 2.113991] uhci_hcd 0000:00:1a.2: irq 18, io base 0x00003060
[ 2.114092] usb usb7: New USB device found, idVendor=1d6b, idProduct=0001
[ 2.114095] usb usb7: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 2.114098] usb usb7: Product: UHCI Host Controller
[ 2.114100] usb usb7: Manufacturer: Linux 4.12.0-1-amd64 uhci_hcd
[ 2.114102] usb usb7: SerialNumber: 0000:00:1a.2
[ 2.114282] hub 7-0:1.0: USB hub found
[ 2.114293] hub 7-0:1.0: 2 ports detected
[ 2.114560] uhci_hcd 0000:00:1d.0: UHCI Host Controller
[ 2.114567] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 8
[ 2.114576] uhci_hcd 0000:00:1d.0: detected 2 ports
[ 2.114597] uhci_hcd 0000:00:1d.0: irq 16, io base 0x00003080
[ 2.114727] usb usb8: New USB device found, idVendor=1d6b, idProduct=0001
[ 2.114730] usb usb8: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 2.114732] usb usb8: Product: UHCI Host Controller
[ 2.114734] usb usb8: Manufacturer: Linux 4.12.0-1-amd64 uhci_hcd
[ 2.114736] usb usb8: SerialNumber: 0000:00:1d.0
[ 2.114902] hub 8-0:1.0: USB hub found
[ 2.114913] hub 8-0:1.0: 2 ports detected
[ 2.115188] uhci_hcd 0000:00:1d.1: UHCI Host Controller
[ 2.115195] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 9
[ 2.115204] uhci_hcd 0000:00:1d.1: detected 2 ports
[ 2.115228] uhci_hcd 0000:00:1d.1: irq 17, io base 0x000030a0
[ 2.115360] usb usb9: New USB device found, idVendor=1d6b, idProduct=0001
[ 2.115363] usb usb9: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 2.115365] usb usb9: Product: UHCI Host Controller
[ 2.115367] usb usb9: Manufacturer: Linux 4.12.0-1-amd64 uhci_hcd
[ 2.115369] usb usb9: SerialNumber: 0000:00:1d.1
[ 2.115528] hub 9-0:1.0: USB hub found
[ 2.115539] hub 9-0:1.0: 2 ports detected
[ 2.115799] uhci_hcd 0000:00:1d.2: UHCI Host Controller
[ 2.115807] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 10
[ 2.115817] uhci_hcd 0000:00:1d.2: detected 2 ports
[ 2.115839] uhci_hcd 0000:00:1d.2: irq 18, io base 0x000030c0
[ 2.115966] usb usb10: New USB device found, idVendor=1d6b, idProduct=0001
[ 2.115968] usb usb10: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 2.115971] usb usb10: Product: UHCI Host Controller
[ 2.115973] usb usb10: Manufacturer: Linux 4.12.0-1-amd64 uhci_hcd
[ 2.115975] usb usb10: SerialNumber: 0000:00:1d.2
[ 2.116136] hub 10-0:1.0: USB hub found
[ 2.116148] hub 10-0:1.0: 2 ports detected
[ 2.263476] random: fast init done
[ 2.429540] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[ 2.431834] ata1.00: NCQ Send/Recv Log not supported
[ 2.431837] ata1.00: ATA-9: SAMSUNG MZMTE512HMHP-000MV, EXT42M0Q, max UDMA/133
[ 2.431839] ata1.00: 1000215216 sectors, multi 16: LBA48 NCQ (depth 31/32), AA
[ 2.432480] ata1.00: NCQ Send/Recv Log not supported
[ 2.432550] ata1.00: configured for UDMA/133
[ 2.432782] scsi 0:0:0:0: Direct-Access ATA SAMSUNG MZMTE512 2M0Q PQ: 0 ANSI: 5
[ 2.558158] usb 4-2: new full-speed USB device number 2 using uhci_hcd
[ 2.685960] psmouse serio1: trackpoint: IBM TrackPoint firmware: 0x0e, buttons: 3/3
[ 2.703616] input: TPPS/2 IBM TrackPoint as /devices/platform/i8042/serio1/input/input2
[ 2.745188] usb 4-2: New USB device found, idVendor=0a5c, idProduct=21e6
[ 2.745191] usb 4-2: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[ 2.745194] usb 4-2: Product: BCM20702A0
[ 2.745196] usb 4-2: Manufacturer: Broadcom Corp
[ 2.745198] usb 4-2: SerialNumber: 2CD05A7FAEEC
[ 2.777511] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[ 2.781588] ata2.00: ATAPI: HL-DT-ST DVDRW GS22N, CP06, max UDMA/133
[ 2.786413] ata2.00: configured for UDMA/133
[ 2.794948] scsi 1:0:0:0: CD-ROM HL-DT-ST DVDRW GS22N CP06 PQ: 0 ANSI: 5
[ 2.811007] sd 0:0:0:0: [sda] 1000215216 512-byte logical blocks: (512 GB/477 GiB)
[ 2.811026] sd 0:0:0:0: [sda] Write Protect is off
[ 2.811029] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 2.811061] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 2.814500] sda: sda1 sda2 sda3 sda4 sda5 sda6 sda7 sda8 sda9 sda10
[ 2.815539] sd 0:0:0:0: [sda] Attached SCSI disk
[ 2.825136] sr 1:0:0:0: [sr0] scsi3-mmc drive: 24x/24x writer cd/rw xa/form2 cdda caddy
[ 2.825138] cdrom: Uniform CD-ROM driver Revision: 3.20
[ 2.825287] sr 1:0:0:0: Attached scsi CD-ROM sr0
[ 3.042062] raid6: sse2x1 gen() 2575 MB/s
[ 3.110052] raid6: sse2x1 xor() 2700 MB/s
[ 3.178064] raid6: sse2x2 gen() 3387 MB/s
[ 3.246055] raid6: sse2x2 xor() 3332 MB/s
[ 3.254084] usb 5-5: new high-speed USB device number 3 using ehci-pci
[ 3.314062] raid6: sse2x4 gen() 4662 MB/s
[ 3.382054] raid6: sse2x4 xor() 3758 MB/s
[ 3.382056] raid6: using algorithm sse2x4 gen() 4662 MB/s
[ 3.382057] raid6: .... xor() 3758 MB/s, rmw enabled
[ 3.382058] raid6: using ssse3x2 recovery algorithm
[ 3.382394] xor: measuring software checksum speed
[ 3.402394] usb 5-5: New USB device found, idVendor=17ef, idProduct=1005
[ 3.402397] usb 5-5: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[ 3.402901] hub 5-5:1.0: USB hub found
[ 3.403142] hub 5-5:1.0: 4 ports detected
[ 3.422052] prefetch64-sse: 6532.000 MB/sec
[ 3.462049] generic_sse: 5762.000 MB/sec
[ 3.462051] xor: using function: prefetch64-sse (6532.000 MB/sec)
[ 3.462343] async_tx: api initialized (async)
[ 3.529007] Btrfs loaded, crc32c=crc32c-generic
[ 3.803756] EXT4-fs (sda4): mounted filesystem with ordered data mode. Opts: (null)
[ 3.927571] ip_tables: (C) 2000-2006 Netfilter Core Team
[ 3.934906] systemd[1]: systemd 234 running in system mode. (+PAM +AUDIT +SELINUX +IMA +APPARMOR +SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ +LZ4 +SECCOMP +BLKID +ELFUTILS +KMOD -IDN2 +IDN default-hierarchy=hybrid)
[ 3.935075] systemd[1]: Detected architecture x86-64.
[ 3.935257] systemd[1]: Set hostname to <universi-if9ee1>.
[ 4.106241] systemd[1]: Listening on Journal Audit Socket.
[ 4.106308] systemd[1]: Reached target Libvirt guests shutdown.
[ 4.106369] systemd[1]: Listening on RPCbind Server Activation Socket.
[ 4.106425] systemd[1]: Listening on udev Kernel Socket.
[ 4.106462] systemd[1]: Reached target Swap.
[ 4.106484] systemd[1]: Reached target User and Group Name Lookups.
[ 4.106562] systemd[1]: Started Forward Password Requests to Wall Directory Watch.
[ 4.139930] RPC: Registered named UNIX socket transport module.
[ 4.139931] RPC: Registered udp transport module.
[ 4.139932] RPC: Registered tcp transport module.
[ 4.139933] RPC: Registered tcp NFSv4.1 backchannel transport module.
[ 4.159355] EXT4-fs (sda4): re-mounted. Opts: discard,user_xattr,errors=remount-ro
[ 4.183114] lp: driver loaded but no devices found
[ 4.190446] ppdev: user-space parallel port driver
[ 4.235473] drbd: initialized. Version: 8.4.7 (api:1/proto:86-101)
[ 4.235476] drbd: srcversion: 36141A9226B7E2B3043CBC2
[ 4.235477] drbd: registered as block device major 147
[ 4.526512] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[ 4.538912] input: Sleep Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/device:2a/PNP0C09:00/PNP0C0E:00/input/input3
[ 4.538918] ACPI: Sleep Button [SLPB]
[ 4.540604] input: Lid Switch as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/device:2a/PNP0C09:00/PNP0C0D:00/input/input4
[ 4.542103] ACPI: Lid Switch [LID]
[ 4.542206] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input5
[ 4.542210] ACPI: Power Button [PWRF]
[ 4.542949] ACPI: AC Adapter [AC] (on-line)
[ 4.542975] ACPI Exception: AE_NOT_FOUND, Error reading AC Adapter state (20170303/ac-139)
[ 4.545408] ACPI: Video Device [GFX0] (multi-head: yes rom: no post: no)
[ 4.550209] acpi device:04: registered as cooling_device2
[ 4.550296] input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:00/input/input6
[ 4.610150] Non-volatile memory driver v1.3
[ 4.618072] thinkpad_acpi: ThinkPad ACPI Extras v0.25
[ 4.618073] thinkpad_acpi: http://ibm-acpi.sf.net/
[ 4.618074] thinkpad_acpi: ThinkPad BIOS CBET4000 4.6-1425-g6732b4fcdc, EC 7XHT25WW-3.6
[ 4.618075] thinkpad_acpi: Lenovo ThinkPad X200s, model 7470AE7
[ 4.620674] thinkpad_hwmon thinkpad_hwmon: hwmon_device_register() is deprecated. Please convert the driver to use hwmon_device_register_with_info().
[ 4.621865] thinkpad_acpi: Tablet mode switch found (type: MHKG), currently in laptop mode
[ 4.621879] thinkpad_acpi: This ThinkPad has standard ACPI backlight brightness control, supported by the ACPI video driver
[ 4.621880] thinkpad_acpi: Disabling thinkpad-acpi brightness events by default...
[ 4.622656] ACPI: Battery Slot [BAT0] (battery present)
[ 4.622849] ACPI: Battery Slot [BAT1] (battery absent)
[ 4.635789] thinkpad_acpi: Standard ACPI backlight interface available, not loading native one
[ 4.636018] thinkpad_acpi: Console audio control enabled, mode: monitor (read only)
[ 4.641828] input: ThinkPad Extra Buttons as /devices/platform/thinkpad_acpi/input/input7
[ 4.650212] snd_hda_codec_conexant hdaudioC0D0: CX20561 (Hermosa): BIOS auto-probing.
[ 4.650757] snd_hda_codec_conexant hdaudioC0D0: autoconfig for CX20561 (Hermosa): line_outs=1 (0x1a/0x0/0x0/0x0/0x0) type:speaker
[ 4.650759] snd_hda_codec_conexant hdaudioC0D0: speaker_outs=0 (0x0/0x0/0x0/0x0/0x0)
[ 4.650761] snd_hda_codec_conexant hdaudioC0D0: hp_outs=2 (0x19/0x16/0x0/0x0/0x0)
[ 4.650763] snd_hda_codec_conexant hdaudioC0D0: mono: mono_out=0x0
[ 4.650764] snd_hda_codec_conexant hdaudioC0D0: dig-out=0x1c/0x0
[ 4.650766] snd_hda_codec_conexant hdaudioC0D0: inputs:
[ 4.650768] snd_hda_codec_conexant hdaudioC0D0: Mic=0x18
[ 4.650770] snd_hda_codec_conexant hdaudioC0D0: Internal Mic=0x1d
[ 4.650771] snd_hda_codec_conexant hdaudioC0D0: Dock Mic=0x17
[ 4.651865] snd_hda_codec_conexant hdaudioC0D0: Enable sync_write for stable communication
[ 4.661448] pci 0000:00:00.0: Intel GM45 Chipset
[ 4.661469] pci 0000:00:00.0: detected gtt size: 2097152K total, 262144K mappable
[ 4.663096] pci 0000:00:00.0: detected 262144K stolen memory
[ 4.664081] [drm] Memory usable by graphics device = 2048M
[ 4.664085] checking generic (d0000000 500000) vs hw (d0000000 10000000)
[ 4.664086] fb: switching to inteldrmfb from EFI VGA
[ 4.664248] input: HDA Digital PCBeep as /devices/pci0000:00/0000:00:1b.0/sound/card0/input8
[ 4.664530] input: HDA Intel Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input9
[ 4.664566] input: HDA Intel Dock Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input10
[ 4.664601] input: HDA Intel Dock Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card0/input11
[ 4.664635] input: HDA Intel Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card0/input12
[ 4.664908] Console: switching to colour dummy device 80x25
[ 4.665001] [drm] Replacing VGA console driver
[ 4.665056] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
[ 4.665057] [drm] Driver supports precise vblank timestamp query.
[ 4.665062] i915 0000:00:02.0: Invalid PCI ROM data signature: expecting 0x52494350, got 0xe934aa55
[ 4.665068] [drm] Failed to find VBIOS tables (VBT)
[ 4.665309] i915 0000:00:02.0: vgaarb: changed VGA decodes: olddecodes=io+mem,decodes=io+mem:owns=io+mem
[ 4.688038] ath: phy0: Killer Wireless card detected
[ 4.698332] ath: phy0: ASPM enabled: 0x43
[ 4.698334] ath: EEPROM regdomain: 0x60
[ 4.698335] ath: EEPROM indicates we should expect a direct regpair map
[ 4.698337] ath: Country alpha2 being used: 00
[ 4.698338] ath: Regpair used: 0x60
[ 4.710418] ieee80211 phy0: Selected rate control algorithm 'minstrel_ht'
[ 4.710936] ieee80211 phy0: Atheros AR9300 Rev:3 mem=0xffffa29981300000, irq=17
[ 4.720832] ath: phy1: ASPM enabled: 0x43
[ 4.720834] ath: EEPROM regdomain: 0x6a
[ 4.720835] ath: EEPROM indicates we should expect a direct regpair map
[ 4.720837] ath: Country alpha2 being used: 00
[ 4.720838] ath: Regpair used: 0x6a
[ 4.722440] ieee80211 phy1: Selected rate control algorithm 'minstrel_ht'
[ 4.722931] ieee80211 phy1: Atheros AR9300 Rev:3 mem=0xffffa29981340000, irq=18
[ 4.893109] [drm] RC6 disabled, disabling runtime PM support
[ 4.893564] [drm] Initialized i915 1.6.0 20170403 for 0000:00:02.0 on minor 0
[ 4.893775] ACPI Warning: SystemIO range 0x0000000000000528-0x000000000000052F conflicts with OpRegion 0x0000000000000500-0x000000000000057F (\PMIO) (20170303/utaddress-247)
[ 4.893781] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[ 4.893784] ACPI Warning: SystemIO range 0x00000000000005B0-0x00000000000005BF conflicts with OpRegion 0x0000000000000580-0x00000000000005BB (\GPIO) (20170303/utaddress-247)
[ 4.893787] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[ 4.893788] ACPI Warning: SystemIO range 0x0000000000000580-0x00000000000005AF conflicts with OpRegion 0x0000000000000580-0x00000000000005BB (\GPIO) (20170303/utaddress-247)
[ 4.893792] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[ 4.893792] lpc_ich: Resource conflict(s) found affecting gpio_ich
[ 4.948678] sd 0:0:0:0: Attached scsi generic sg0 type 0
[ 4.948717] sr 1:0:0:0: Attached scsi generic sg1 type 5
[ 5.189352] EXT4-fs (sda10): mounted filesystem with ordered data mode. Opts: discard,user_xattr
[ 5.195688] EXT4-fs (sda3): mounting ext2 file system using the ext4 subsystem
[ 5.205744] EXT4-fs (sda3): mounted filesystem without journal. Opts: discard,user_xattr
[ 5.232006] input: PC Speaker as /devices/platform/pcspkr/input/input13
[ 5.261761] EXT4-fs (sda7): mounted filesystem with ordered data mode. Opts: discard,user_xattr
[ 5.273205] EXT4-fs (sda6): mounted filesystem with ordered data mode. Opts: discard,user_xattr
[ 5.283022] EXT4-fs (sda8): mounted filesystem with ordered data mode. Opts: discard,user_xattr
[ 5.287246] FAT-fs (sda2): Volume was not properly unmounted. Some data may be corrupt. Please run fsck.
[ 5.314899] intel_powerclamp: No package C-state available
[ 5.326272] systemd-journald[257]: Received request to flush runtime journal from PID 1
[ 5.331725] EXT4-fs (sda5): mounted filesystem with ordered data mode. Opts: discard,user_xattr
[ 5.334804] EXT4-fs (sda9): mounted filesystem with ordered data mode. Opts: discard,user_xattr
[ 5.489493] iTCO_vendor_support: vendor-support=0
[ 5.490872] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.11
[ 5.490924] iTCO_wdt: Found a ICH9M-E TCO device (Version=2, TCOBASE=0x0560)
[ 5.491442] iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0)
[ 5.770839] random: crng init done
[ 5.842541] Bluetooth: Core ver 2.22
[ 5.843118] NET: Registered protocol family 31
[ 5.843120] Bluetooth: HCI device and connection manager initialized
[ 5.843188] Bluetooth: HCI socket layer initialized
[ 5.843192] Bluetooth: L2CAP socket layer initialized
[ 5.843203] Bluetooth: SCO socket layer initialized
[ 5.851370] usbcore: registered new interface driver btusb
[ 5.970166] Bluetooth: hci0: BCM: chip id 63
[ 6.002177] Bluetooth: hci0: BCM20702A
[ 6.004167] Bluetooth: hci0: BCM20702A1 (001.002.014) build 0000
[ 6.004350] bluetooth hci0: firmware: failed to load brcm/BCM20702A1-0a5c-21e6.hcd (-2)
[ 6.004357] bluetooth hci0: Direct firmware load for brcm/BCM20702A1-0a5c-21e6.hcd failed with error -2
[ 6.004359] Bluetooth: hci0: BCM: Patch brcm/BCM20702A1-0a5c-21e6.hcd not found
[ 6.172619] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
[ 6.172621] Bluetooth: BNEP filters: protocol multicast
[ 6.172625] Bluetooth: BNEP socket layer initialized
[ 6.199102] nfc: nfc_init: NFC Core ver 0.1
[ 6.199130] NET: Registered protocol family 39
[ 6.744207] fbcon: inteldrmfb (fb0) is primary device
[ 7.279429] Console: switching to colour frame buffer device 180x56
[ 7.302773] i915 0000:00:02.0: fb0: inteldrmfb frame buffer device
[ 7.785721] ip6_tables: (C) 2000-2006 Netfilter Core Team
[ 7.852728] Ebtables v2.0 registered
[ 15.250677] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 15.458255] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 15.470825] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
[ 15.481665] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
[ 15.498373] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
[ 15.510093] IPv6: ADDRCONF(NETDEV_UP): wlan1: link is not ready
[ 15.519250] IPv6: ADDRCONF(NETDEV_UP): wlan1: link is not ready
[ 15.532848] IPv6: ADDRCONF(NETDEV_UP): wlan1: link is not ready
[ 16.478430] IPv6: ADDRCONF(NETDEV_UP): wlan1: link is not ready
[ 16.497722] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
[ 20.277227] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
[ 20.328792] wlan0: authenticate with f8:1a:67:5a:c4:75
[ 20.342098] wlan0: send auth to f8:1a:67:5a:c4:75 (try 1/3)
[ 20.343849] wlan0: authenticated
[ 20.346247] wlan0: associate with f8:1a:67:5a:c4:75 (try 1/3)
[ 20.347945] wlan0: RX AssocResp from f8:1a:67:5a:c4:75 (capab=0x11 status=0 aid=4)
[ 20.348045] wlan0: associated
[ 20.348086] IPv6: ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
[ 20.415116] ath: EEPROM regdomain: 0x809c
[ 20.415118] ath: EEPROM indicates we should expect a country code
[ 20.415119] ath: doing EEPROM country->regdmn map search
[ 20.415120] ath: country maps to regdmn code: 0x52
[ 20.415121] ath: Country alpha2 being used: CN
[ 20.415122] ath: Regpair used: 0x52
[ 20.415123] ath: regdomain 0x809c dynamically updated by country IE
[ 20.415148] ath: EEPROM regdomain: 0x809c
[ 20.415149] ath: EEPROM indicates we should expect a country code
[ 20.415150] ath: doing EEPROM country->regdmn map search
[ 20.415151] ath: country maps to regdmn code: 0x52
[ 20.415152] ath: Country alpha2 being used: CN
[ 20.415153] ath: Regpair used: 0x52
[ 20.415154] ath: regdomain 0x809c dynamically updated by country IE
[ 31.991487] thinkpad_ec: loading out-of-tree module taints kernel.
[ 31.992765] thinkpad_ec: thinkpad_ec 0.42 loaded.
[ 31.993878] tp_smapi 0.42 loading...
[ 31.993885] SMAPI not supported (ID=0x67)
[ 31.993889] tp_smapi init failed (ret=-6)!
[ 32.047127] tp_smapi 0.42 loading...
[ 32.047136] SMAPI not supported (ID=0x67)
[ 32.047141] tp_smapi init failed (ret=-6)!
[ 33.979705] Bluetooth: RFCOMM TTY layer initialized
[ 33.979711] Bluetooth: RFCOMM socket layer initialized
[ 33.979720] Bluetooth: RFCOMM ver 1.11
[ 361.022417] IPv6: ADDRCONF(NETDEV_UP): wlan1: link is not ready
[ 389.223139] device-mapper: uevent: version 1.0.3
[ 389.223878] device-mapper: ioctl: 4.35.0-ioctl (2016-06-23) initialised: dm-devel@redhat.com
[ 398.768890] SGI XFS with ACLs, security attributes, realtime, no debug enabled
[ 398.775278] JFS: nTxBlock = 8192, nTxLock = 65536
[ 398.787756] ntfs: driver 2.1.32 [Flags: R/O MODULE].
[ 398.801118] QNX4 filesystem 0.2.3 registered.
[ 398.812060] fuse init (API version 7.26)