blob: e752e2c7396b6211c0ef22915c5c4ed694d71db8 [file] [log] [blame]
[ 0.000000] Linux version 4.12.0-1-amd64 (debian-kernel@lists.debian.org) (gcc version 6.4.0 20170805 (Debian 6.4.0-3) ) #1 SMP Debian 4.12.6-1 (2017-08-12)
[ 0.000000] Command line: BOOT_IMAGE=/vmlinuz-4.12.0-1-amd64 root=UUID=a994a1c5-a911-48bd-a468-4aa6a9728001 ro quiet iomem=relaxed
[ 0.000000] x86/fpu: x87 FPU will use FXSAVE
[ 0.000000] e820: BIOS-provided physical RAM map:
[ 0.000000] BIOS-e820: [mem 0x0000000000000000-0x0000000000000fff] type 16
[ 0.000000] BIOS-e820: [mem 0x0000000000001000-0x000000000009ffff] usable
[ 0.000000] BIOS-e820: [mem 0x00000000000c0000-0x00000000000fffff] reserved
[ 0.000000] BIOS-e820: [mem 0x0000000000100000-0x000000007fb18fff] usable
[ 0.000000] BIOS-e820: [mem 0x000000007fb19000-0x000000007fbfffff] type 16
[ 0.000000] BIOS-e820: [mem 0x000000007fc00000-0x000000008fffffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000f0000000-0x00000000f3ffffff] reserved
[ 0.000000] BIOS-e820: [mem 0x0000000100000000-0x000000026fffffff] usable
[ 0.000000] NX (Execute Disable) protection: active
[ 0.000000] SMBIOS 2.7 present.
[ 0.000000] DMI: LENOVO 7470AE7/7470AE7, BIOS CBET4000 4.6-1425-g6732b4fcdc 09/13/2017
[ 0.000000] tsc: Fast TSC calibration using PIT
[ 0.000000] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
[ 0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable
[ 0.000000] e820: last_pfn = 0x270000 max_arch_pfn = 0x400000000
[ 0.000000] MTRR default type: write-back
[ 0.000000] MTRR fixed ranges enabled:
[ 0.000000] 00000-9FFFF write-back
[ 0.000000] A0000-BFFFF uncachable
[ 0.000000] C0000-FFFFF write-back
[ 0.000000] MTRR variable ranges enabled:
[ 0.000000] 0 base 07FC00000 mask FFFC00000 uncachable
[ 0.000000] 1 base 080000000 mask FC0000000 uncachable
[ 0.000000] 2 base 0C0000000 mask FF0000000 uncachable
[ 0.000000] 3 base 0D0000000 mask FF0000000 write-combining
[ 0.000000] 4 base 0E0000000 mask FE0000000 uncachable
[ 0.000000] 5 disabled
[ 0.000000] 6 disabled
[ 0.000000] 7 disabled
[ 0.000000] x86/PAT: Configuration [0-7]: WB WC UC- UC WB WC UC- WT
[ 0.000000] e820: last_pfn = 0x7fb19 max_arch_pfn = 0x400000000
[ 0.000000] found SMP MP-table at [mem 0x000f0710-0x000f071f] mapped at [ffff8c9e800f0710]
[ 0.000000] Base memory trampoline at [ffff8c9e80099000] 99000 size 24576
[ 0.000000] BRK [0x62f54000, 0x62f54fff] PGTABLE
[ 0.000000] BRK [0x62f55000, 0x62f55fff] PGTABLE
[ 0.000000] BRK [0x62f56000, 0x62f56fff] PGTABLE
[ 0.000000] BRK [0x62f57000, 0x62f57fff] PGTABLE
[ 0.000000] BRK [0x62f58000, 0x62f58fff] PGTABLE
[ 0.000000] BRK [0x62f59000, 0x62f59fff] PGTABLE
[ 0.000000] BRK [0x62f5a000, 0x62f5afff] PGTABLE
[ 0.000000] BRK [0x62f5b000, 0x62f5bfff] PGTABLE
[ 0.000000] BRK [0x62f5c000, 0x62f5cfff] PGTABLE
[ 0.000000] BRK [0x62f5d000, 0x62f5dfff] PGTABLE
[ 0.000000] RAMDISK: [mem 0x356fb000-0x36b74fff]
[ 0.000000] ACPI: Early table checksum verification disabled
[ 0.000000] ACPI: RSDP 0x00000000000F08B0 000024 (v02 CORE )
[ 0.000000] ACPI: XSDT 0x000000007FB2A0E0 00005C (v01 CORE COREBOOT 00000000 CORE 00000000)
[ 0.000000] ACPI: FACP 0x000000007FB2D760 0000F4 (v03 CORE COREBOOT 00000000 CORE 00000000)
[ 0.000000] ACPI: DSDT 0x000000007FB2A280 0034D3 (v03 COREv4 COREBOOT 20090419 INTL 20161222)
[ 0.000000] ACPI: FACS 0x000000007FB2A240 000040
[ 0.000000] ACPI: SSDT 0x000000007FB2D860 0005A0 (v02 CORE COREBOOT 0000002A CORE 0000002A)
[ 0.000000] ACPI: MCFG 0x000000007FB2DE00 00003C (v01 CORE COREBOOT 00000000 CORE 00000000)
[ 0.000000] ACPI: TCPA 0x000000007FB2DE40 000032 (v02 CORE COREBOOT 00000000 CORE 00000000)
[ 0.000000] ACPI: APIC 0x000000007FB2DE80 000068 (v01 CORE COREBOOT 00000000 CORE 00000000)
[ 0.000000] ACPI: DMAR 0x000000007FB2DEF0 000078 (v01 CORE COREBOOT 00000000 CORE 00000000)
[ 0.000000] ACPI: HPET 0x000000007FB2DF70 000038 (v01 CORE COREBOOT 00000000 CORE 00000000)
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] No NUMA configuration found
[ 0.000000] Faking a node at [mem 0x0000000000000000-0x000000026fffffff]
[ 0.000000] NODE_DATA(0) allocated [mem 0x26fff9000-0x26fffdfff]
[ 0.000000] Zone ranges:
[ 0.000000] DMA [mem 0x0000000000001000-0x0000000000ffffff]
[ 0.000000] DMA32 [mem 0x0000000001000000-0x00000000ffffffff]
[ 0.000000] Normal [mem 0x0000000100000000-0x000000026fffffff]
[ 0.000000] Device empty
[ 0.000000] Movable zone start for each node
[ 0.000000] Early memory node ranges
[ 0.000000] node 0: [mem 0x0000000000001000-0x000000000009ffff]
[ 0.000000] node 0: [mem 0x0000000000100000-0x000000007fb18fff]
[ 0.000000] node 0: [mem 0x0000000100000000-0x000000026fffffff]
[ 0.000000] Initmem setup node 0 [mem 0x0000000000001000-0x000000026fffffff]
[ 0.000000] On node 0 totalpages: 2030264
[ 0.000000] DMA zone: 64 pages used for memmap
[ 0.000000] DMA zone: 22 pages reserved
[ 0.000000] DMA zone: 3999 pages, LIFO batch:0
[ 0.000000] DMA32 zone: 8109 pages used for memmap
[ 0.000000] DMA32 zone: 518937 pages, LIFO batch:31
[ 0.000000] Normal zone: 23552 pages used for memmap
[ 0.000000] Normal zone: 1507328 pages, LIFO batch:31
[ 0.000000] Reserving Intel graphics memory at 0x0000000080000000-0x000000008fffffff
[ 0.000000] ACPI: PM-Timer IO Port: 0x508
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
[ 0.000000] IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-23
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 high edge)
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[ 0.000000] ACPI: IRQ0 used by override.
[ 0.000000] ACPI: IRQ9 used by override.
[ 0.000000] Using ACPI (MADT) for SMP configuration information
[ 0.000000] ACPI: HPET id: 0x8086a301 base: 0xfed00000
[ 0.000000] smpboot: Allowing 2 CPUs, 0 hotplug CPUs
[ 0.000000] PM: Registered nosave memory: [mem 0x00000000-0x00000fff]
[ 0.000000] PM: Registered nosave memory: [mem 0x000a0000-0x000bffff]
[ 0.000000] PM: Registered nosave memory: [mem 0x000c0000-0x000fffff]
[ 0.000000] PM: Registered nosave memory: [mem 0x7fb19000-0x7fbfffff]
[ 0.000000] PM: Registered nosave memory: [mem 0x7fc00000-0x8fffffff]
[ 0.000000] PM: Registered nosave memory: [mem 0x90000000-0xefffffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xf0000000-0xf3ffffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xf4000000-0xffffffff]
[ 0.000000] e820: [mem 0x90000000-0xefffffff] available for PCI devices
[ 0.000000] Booting paravirtualized kernel on bare hardware
[ 0.000000] clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645519600211568 ns
[ 0.000000] setup_percpu: NR_CPUS:512 nr_cpumask_bits:512 nr_cpu_ids:2 nr_node_ids:1
[ 0.000000] percpu: Embedded 38 pages/cpu @ffff8ca0efc00000 s114776 r8192 d32680 u1048576
[ 0.000000] pcpu-alloc: s114776 r8192 d32680 u1048576 alloc=1*2097152
[ 0.000000] pcpu-alloc: [0] 0 1
[ 0.000000] Built 1 zonelists in Node order, mobility grouping on. Total pages: 1998517
[ 0.000000] Policy zone: Normal
[ 0.000000] Kernel command line: BOOT_IMAGE=/vmlinuz-4.12.0-1-amd64 root=UUID=a994a1c5-a911-48bd-a468-4aa6a9728001 ro quiet iomem=relaxed
[ 0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes)
[ 0.000000] Calgary: detecting Calgary via BIOS EBDA area
[ 0.000000] Calgary: Unable to locate Rio Grande table in EBDA - bailing!
[ 0.000000] Memory: 7890940K/8121056K available (6481K kernel code, 1145K rwdata, 2908K rodata, 1468K init, 704K bss, 230116K reserved, 0K cma-reserved)
[ 0.000000] ftrace: allocating 28155 entries in 110 pages
[ 0.000000] Hierarchical RCU implementation.
[ 0.000000] RCU restricting CPUs from NR_CPUS=512 to nr_cpu_ids=2.
[ 0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=2
[ 0.000000] NR_IRQS:33024 nr_irqs:440 16
[ 0.000000] spurious 8259A interrupt: IRQ7.
[ 0.000000] Console: colour dummy device 80x25
[ 0.000000] console [tty0] enabled
[ 0.000000] clocksource: hpet: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 133484882848 ns
[ 0.000000] hpet clockevent registered
[ 0.000000] tsc: Fast TSC calibration using PIT
[ 0.004000] tsc: Detected 1866.670 MHz processor
[ 0.004000] Calibrating delay loop (skipped), value calculated using timer frequency.. 3733.34 BogoMIPS (lpj=7466680)
[ 0.004000] pid_max: default: 32768 minimum: 301
[ 0.004000] ACPI: Core revision 20170303
[ 0.009613] ACPI: 2 ACPI AML tables successfully acquired and loaded
[ 0.009686] Security Framework initialized
[ 0.009688] Yama: disabled by default; enable with sysctl kernel.yama.*
[ 0.009695] AppArmor: AppArmor disabled by boot time parameter
[ 0.010466] Dentry cache hash table entries: 1048576 (order: 11, 8388608 bytes)
[ 0.014122] Inode-cache hash table entries: 524288 (order: 10, 4194304 bytes)
[ 0.016233] Mount-cache hash table entries: 16384 (order: 5, 131072 bytes)
[ 0.016247] Mountpoint-cache hash table entries: 16384 (order: 5, 131072 bytes)
[ 0.016731] CPU: Physical Processor ID: 0
[ 0.016733] CPU: Processor Core ID: 0
[ 0.016734] mce: CPU supports 6 MCE banks
[ 0.016744] CPU0: Thermal monitoring enabled (TM2)
[ 0.016748] process: using mwait in idle threads
[ 0.016754] Last level iTLB entries: 4KB 128, 2MB 4, 4MB 4
[ 0.016755] Last level dTLB entries: 4KB 256, 2MB 0, 4MB 32, 1GB 0
[ 0.016942] Freeing SMP alternatives memory: 24K
[ 0.020148] smpboot: Max logical packages: 1
[ 0.020157] DMAR: Host address width 36
[ 0.020159] DMAR: DRHD base: 0x000000fed90000 flags: 0x0
[ 0.020171] DMAR: dmar0: reg_base_addr fed90000 ver 1:0 cap c9008020e30260 ecap 1000
[ 0.020173] DMAR: DRHD base: 0x000000fed91000 flags: 0x0
[ 0.020179] DMAR: dmar1: reg_base_addr fed91000 ver 1:0 cap c0000020630260 ecap 1000
[ 0.020180] DMAR: DRHD base: 0x000000fed93000 flags: 0x1
[ 0.020185] DMAR: dmar2: reg_base_addr fed93000 ver 1:0 cap c9008020630260 ecap 1000
[ 0.020569] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=0 pin2=0
[ 0.064000] smpboot: CPU0: Intel(R) Core(TM)2 Duo CPU L9400 @ 1.86GHz (family: 0x6, model: 0x17, stepping: 0x6)
[ 0.064000] Performance Events: PEBS fmt0+, Core2 events, Intel PMU driver.
[ 0.064000] ... version: 2
[ 0.064000] ... bit width: 40
[ 0.064000] ... generic registers: 2
[ 0.064000] ... value mask: 000000ffffffffff
[ 0.064000] ... max period: 000000007fffffff
[ 0.064000] ... fixed-purpose events: 3
[ 0.064000] ... event mask: 0000000700000003
[ 0.064000] smp: Bringing up secondary CPUs ...
[ 0.064000] x86: Booting SMP configuration:
[ 0.064000] .... node #0, CPUs: #1
[ 0.142029] smp: Brought up 1 node, 2 CPUs
[ 0.142029] smpboot: Total of 2 processors activated (7466.78 BogoMIPS)
[ 0.142029] NMI watchdog: enabled on all CPUs, permanently consumes one hw-PMU counter.
[ 0.144096] sched_clock: Marking stable (144000000, 0)->(252946596, -108946596)
[ 0.144627] devtmpfs: initialized
[ 0.144715] x86/mm: Memory block size: 128MB
[ 0.150098] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns
[ 0.150106] futex hash table entries: 512 (order: 3, 32768 bytes)
[ 0.150168] pinctrl core: initialized pinctrl subsystem
[ 0.150332] NET: Registered protocol family 16
[ 0.150642] cpuidle: using governor ladder
[ 0.150682] cpuidle: using governor menu
[ 0.150684] PCCT header not found.
[ 0.150723] ACPI: bus type PCI registered
[ 0.150725] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
[ 0.150813] PCI: MMCONFIG for domain 0000 [bus 00-3f] at [mem 0xf0000000-0xf3ffffff] (base 0xf0000000)
[ 0.150816] PCI: MMCONFIG at [mem 0xf0000000-0xf3ffffff] reserved in E820
[ 0.150827] PCI: Using configuration type 1 for base access
[ 0.152466] HugeTLB registered 2 MB page size, pre-allocated 0 pages
[ 0.152770] ACPI: Added _OSI(Module Device)
[ 0.152772] ACPI: Added _OSI(Processor Device)
[ 0.152773] ACPI: Added _OSI(3.0 _SCP Extensions)
[ 0.152774] ACPI: Added _OSI(Processor Aggregator Device)
[ 0.152980] ACPI: Executed 1 blocks of module-level executable AML code
[ 0.154554] ACPI: [Firmware Bug]: BIOS _OSI(Linux) query ignored
[ 0.156061] ACPI : EC: EC started
[ 0.156063] ACPI : EC: interrupt blocked
[ 0.156163] ACPI: \_SB_.PCI0.LPCB.EC__: Used as first EC
[ 0.156166] ACPI: \_SB_.PCI0.LPCB.EC__: GPE=0x11, EC_CMD/EC_SC=0x66, EC_DATA=0x62
[ 0.156169] ACPI: \_SB_.PCI0.LPCB.EC__: Used as boot DSDT EC to handle transactions
[ 0.156170] ACPI: Interpreter enabled
[ 0.156197] ACPI: (supports S0 S3 S4 S5)
[ 0.156198] ACPI: Using IOAPIC for interrupt routing
[ 0.156231] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
[ 0.169864] acpi ACPI0003:01: ACPI dock station (docks/bays count: 1)
[ 0.170344] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
[ 0.170351] acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI]
[ 0.170425] acpi PNP0A08:00: _OSC: OS now controls [PCIeHotplug PME AER PCIeCapability]
[ 0.170438] acpi PNP0A08:00: [Firmware Info]: MMCONFIG for domain 0000 [bus 00-3f] only partially covers this bridge
[ 0.170510] acpi PNP0A08:00: ignoring host bridge window [mem 0x000c4000-0x000c7fff window] (conflicts with Video ROM [mem 0x000c0000-0x000c67ff])
[ 0.170816] PCI host bridge to bus 0000:00
[ 0.170819] pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7 window]
[ 0.170821] pci_bus 0000:00: root bus resource [io 0x0d00-0xffff window]
[ 0.170823] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff window]
[ 0.170825] pci_bus 0000:00: root bus resource [mem 0x000c0000-0x000c3fff window]
[ 0.170827] pci_bus 0000:00: root bus resource [mem 0x000c8000-0x000cbfff window]
[ 0.170829] pci_bus 0000:00: root bus resource [mem 0x000cc000-0x000cffff window]
[ 0.170831] pci_bus 0000:00: root bus resource [mem 0x000d0000-0x000d3fff window]
[ 0.170834] pci_bus 0000:00: root bus resource [mem 0x000d4000-0x000d7fff window]
[ 0.170836] pci_bus 0000:00: root bus resource [mem 0x000d8000-0x000dbfff window]
[ 0.170838] pci_bus 0000:00: root bus resource [mem 0x000dc000-0x000dffff window]
[ 0.170840] pci_bus 0000:00: root bus resource [mem 0x000e0000-0x000e3fff window]
[ 0.170842] pci_bus 0000:00: root bus resource [mem 0x000e4000-0x000e7fff window]
[ 0.170844] pci_bus 0000:00: root bus resource [mem 0x000e8000-0x000ebfff window]
[ 0.170846] pci_bus 0000:00: root bus resource [mem 0x000ec000-0x000effff window]
[ 0.170848] pci_bus 0000:00: root bus resource [mem 0x000f0000-0x000fffff window]
[ 0.170851] pci_bus 0000:00: root bus resource [mem 0x90000000-0xfebfffff window]
[ 0.170853] pci_bus 0000:00: root bus resource [mem 0xfed40000-0xfed44fff window]
[ 0.170855] pci_bus 0000:00: root bus resource [bus 00-ff]
[ 0.170867] pci 0000:00:00.0: [8086:2a40] type 00 class 0x060000
[ 0.170895] DMAR: Forcing write-buffer flush capability
[ 0.170896] DMAR: Disabling IOMMU for graphics on this chipset
[ 0.171026] pci 0000:00:02.0: [8086:2a42] type 00 class 0x030000
[ 0.171040] pci 0000:00:02.0: reg 0x10: [mem 0xe1400000-0xe17fffff 64bit]
[ 0.171049] pci 0000:00:02.0: reg 0x18: [mem 0xd0000000-0xdfffffff 64bit pref]
[ 0.171056] pci 0000:00:02.0: reg 0x20: [io 0x3400-0x3407]
[ 0.171195] pci 0000:00:02.1: [8086:2a43] type 00 class 0x038000
[ 0.171208] pci 0000:00:02.1: reg 0x10: [mem 0xe1800000-0xe18fffff 64bit]
[ 0.171396] pci 0000:00:19.0: [8086:10f5] type 00 class 0x020000
[ 0.171420] pci 0000:00:19.0: reg 0x10: [mem 0xe1b00000-0xe1b1ffff]
[ 0.171432] pci 0000:00:19.0: reg 0x14: [mem 0xe1b24000-0xe1b24fff]
[ 0.171444] pci 0000:00:19.0: reg 0x18: [io 0x3000-0x301f]
[ 0.171538] pci 0000:00:19.0: PME# supported from D0 D3hot D3cold
[ 0.171658] pci 0000:00:1a.0: [8086:2937] type 00 class 0x0c0300
[ 0.171718] pci 0000:00:1a.0: reg 0x20: [io 0x3020-0x303f]
[ 0.171863] pci 0000:00:1a.0: System wakeup disabled by ACPI
[ 0.171922] pci 0000:00:1a.1: [8086:2938] type 00 class 0x0c0300
[ 0.171981] pci 0000:00:1a.1: reg 0x20: [io 0x3040-0x305f]
[ 0.172125] pci 0000:00:1a.1: System wakeup disabled by ACPI
[ 0.172185] pci 0000:00:1a.2: [8086:2939] type 00 class 0x0c0300
[ 0.172245] pci 0000:00:1a.2: reg 0x20: [io 0x3060-0x307f]
[ 0.172390] pci 0000:00:1a.2: System wakeup disabled by ACPI
[ 0.172457] pci 0000:00:1a.7: [8086:293c] type 00 class 0x0c0320
[ 0.172481] pci 0000:00:1a.7: reg 0x10: [mem 0xe1b26000-0xe1b263ff]
[ 0.172595] pci 0000:00:1a.7: PME# supported from D0 D3hot D3cold
[ 0.172671] pci 0000:00:1a.7: System wakeup disabled by ACPI
[ 0.172732] pci 0000:00:1b.0: [8086:293e] type 00 class 0x040300
[ 0.172760] pci 0000:00:1b.0: reg 0x10: [mem 0xe1b20000-0xe1b23fff 64bit]
[ 0.172876] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
[ 0.172960] pci 0000:00:1b.0: System wakeup disabled by ACPI
[ 0.173020] pci 0000:00:1c.0: [8086:2940] type 01 class 0x060400
[ 0.173130] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
[ 0.173268] pci 0000:00:1c.1: [8086:2942] type 01 class 0x060400
[ 0.173385] pci 0000:00:1c.1: PME# supported from D0 D3hot D3cold
[ 0.173532] pci 0000:00:1c.2: [8086:2944] type 01 class 0x060400
[ 0.173649] pci 0000:00:1c.2: PME# supported from D0 D3hot D3cold
[ 0.173791] pci 0000:00:1c.3: [8086:2946] type 01 class 0x060400
[ 0.173909] pci 0000:00:1c.3: PME# supported from D0 D3hot D3cold
[ 0.174052] pci 0000:00:1d.0: [8086:2934] type 00 class 0x0c0300
[ 0.174112] pci 0000:00:1d.0: reg 0x20: [io 0x3080-0x309f]
[ 0.174257] pci 0000:00:1d.0: System wakeup disabled by ACPI
[ 0.174314] pci 0000:00:1d.1: [8086:2935] type 00 class 0x0c0300
[ 0.174374] pci 0000:00:1d.1: reg 0x20: [io 0x30a0-0x30bf]
[ 0.174519] pci 0000:00:1d.1: System wakeup disabled by ACPI
[ 0.174576] pci 0000:00:1d.2: [8086:2936] type 00 class 0x0c0300
[ 0.174636] pci 0000:00:1d.2: reg 0x20: [io 0x30c0-0x30df]
[ 0.174781] pci 0000:00:1d.2: System wakeup disabled by ACPI
[ 0.174847] pci 0000:00:1d.7: [8086:293a] type 00 class 0x0c0320
[ 0.174871] pci 0000:00:1d.7: reg 0x10: [mem 0xe1b27000-0xe1b273ff]
[ 0.174985] pci 0000:00:1d.7: PME# supported from D0 D3hot D3cold
[ 0.175061] pci 0000:00:1d.7: System wakeup disabled by ACPI
[ 0.175117] pci 0000:00:1e.0: [8086:2448] type 01 class 0x060401
[ 0.175303] pci 0000:00:1f.0: [8086:2917] type 00 class 0x060100
[ 0.175569] pci 0000:00:1f.2: [8086:2929] type 00 class 0x010601
[ 0.175594] pci 0000:00:1f.2: reg 0x10: [io 0x3408-0x340f]
[ 0.175606] pci 0000:00:1f.2: reg 0x14: [io 0x3418-0x341b]
[ 0.175618] pci 0000:00:1f.2: reg 0x18: [io 0x3410-0x3417]
[ 0.175630] pci 0000:00:1f.2: reg 0x1c: [io 0x341c-0x341f]
[ 0.175642] pci 0000:00:1f.2: reg 0x20: [io 0x30e0-0x30ff]
[ 0.175654] pci 0000:00:1f.2: reg 0x24: [mem 0xe1b25000-0xe1b257ff]
[ 0.175724] pci 0000:00:1f.2: PME# supported from D3hot
[ 0.175850] pci 0000:00:1f.3: [8086:2930] type 00 class 0x0c0500
[ 0.175874] pci 0000:00:1f.3: reg 0x10: [mem 0xe1b28000-0xe1b280ff 64bit]
[ 0.175906] pci 0000:00:1f.3: reg 0x20: [io 0x0400-0x041f]
[ 0.176113] pci 0000:00:1c.0: PCI bridge to [bus 01]
[ 0.176225] pci 0000:02:00.0: [168c:0030] type 00 class 0x028000
[ 0.176290] pci 0000:02:00.0: reg 0x10: [mem 0xe1900000-0xe191ffff 64bit]
[ 0.176408] pci 0000:02:00.0: reg 0x30: [mem 0xe1920000-0xe192ffff pref]
[ 0.176561] pci 0000:02:00.0: supports D1
[ 0.176563] pci 0000:02:00.0: PME# supported from D0 D1 D3hot
[ 0.185511] pci 0000:00:1c.1: PCI bridge to [bus 02]
[ 0.185519] pci 0000:00:1c.1: bridge window [mem 0xe1900000-0xe19fffff]
[ 0.185624] pci 0000:03:00.0: [168c:002b] type 00 class 0x028000
[ 0.185682] pci 0000:03:00.0: reg 0x10: [mem 0xe1a00000-0xe1a0ffff 64bit]
[ 0.185915] pci 0000:03:00.0: supports D1
[ 0.185917] pci 0000:03:00.0: PME# supported from D0 D1 D3hot
[ 0.186104] pci 0000:00:1c.2: PCI bridge to [bus 03]
[ 0.186112] pci 0000:00:1c.2: bridge window [mem 0xe1a00000-0xe1afffff]
[ 0.186224] acpiphp: Slot [1] registered
[ 0.186263] pci 0000:04:00.0: [1b21:1042] type 00 class 0x0c0330
[ 0.186312] pci 0000:04:00.0: reg 0x10: [mem 0xe0800000-0xe0807fff 64bit]
[ 0.186541] pci 0000:04:00.0: PME# supported from D3hot
[ 0.197503] pci 0000:00:1c.3: PCI bridge to [bus 04]
[ 0.197508] pci 0000:00:1c.3: bridge window [io 0x2000-0x2fff]
[ 0.197514] pci 0000:00:1c.3: bridge window [mem 0xe0000000-0xe08fffff]
[ 0.197522] pci 0000:00:1c.3: bridge window [mem 0xe0c00000-0xe13fffff 64bit pref]
[ 0.197709] pci 0000:00:1e.0: PCI bridge to [bus 05] (subtractive decode)
[ 0.197724] pci 0000:00:1e.0: bridge window [io 0x0000-0x0cf7 window] (subtractive decode)
[ 0.197726] pci 0000:00:1e.0: bridge window [io 0x0d00-0xffff window] (subtractive decode)
[ 0.197728] pci 0000:00:1e.0: bridge window [mem 0x000a0000-0x000bffff window] (subtractive decode)
[ 0.197731] pci 0000:00:1e.0: bridge window [mem 0x000c0000-0x000c3fff window] (subtractive decode)
[ 0.197733] pci 0000:00:1e.0: bridge window [mem 0x000c8000-0x000cbfff window] (subtractive decode)
[ 0.197735] pci 0000:00:1e.0: bridge window [mem 0x000cc000-0x000cffff window] (subtractive decode)
[ 0.197738] pci 0000:00:1e.0: bridge window [mem 0x000d0000-0x000d3fff window] (subtractive decode)
[ 0.197740] pci 0000:00:1e.0: bridge window [mem 0x000d4000-0x000d7fff window] (subtractive decode)
[ 0.197742] pci 0000:00:1e.0: bridge window [mem 0x000d8000-0x000dbfff window] (subtractive decode)
[ 0.197744] pci 0000:00:1e.0: bridge window [mem 0x000dc000-0x000dffff window] (subtractive decode)
[ 0.197747] pci 0000:00:1e.0: bridge window [mem 0x000e0000-0x000e3fff window] (subtractive decode)
[ 0.197749] pci 0000:00:1e.0: bridge window [mem 0x000e4000-0x000e7fff window] (subtractive decode)
[ 0.197751] pci 0000:00:1e.0: bridge window [mem 0x000e8000-0x000ebfff window] (subtractive decode)
[ 0.197754] pci 0000:00:1e.0: bridge window [mem 0x000ec000-0x000effff window] (subtractive decode)
[ 0.197756] pci 0000:00:1e.0: bridge window [mem 0x000f0000-0x000fffff window] (subtractive decode)
[ 0.197758] pci 0000:00:1e.0: bridge window [mem 0x90000000-0xfebfffff window] (subtractive decode)
[ 0.197761] pci 0000:00:1e.0: bridge window [mem 0xfed40000-0xfed44fff window] (subtractive decode)
[ 0.197974] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 10 12 14 15) *11
[ 0.198063] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 *11 12 14 15)
[ 0.198149] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 7 10 12 14 15) *11
[ 0.198237] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 *11 12 14 15)
[ 0.198322] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 10 12 14 15) *0, disabled.
[ 0.198408] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 11 12 14 15) *0, disabled.
[ 0.198493] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 7 10 12 14 15) *0, disabled.
[ 0.198579] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 7 11 12 14 15) *0, disabled.
[ 0.200568] ACPI: Enabled 1 GPEs in block 00 to 3F
[ 0.200719] ACPI : EC: interrupt unblocked
[ 0.200729] ACPI : EC: event unblocked
[ 0.200748] ACPI: \_SB_.PCI0.LPCB.EC__: GPE=0x11, EC_CMD/EC_SC=0x66, EC_DATA=0x62
[ 0.200750] ACPI: \_SB_.PCI0.LPCB.EC__: Used as boot DSDT EC to handle transactions and events
[ 0.200939] pci 0000:00:02.0: vgaarb: setting as boot VGA device
[ 0.200942] pci 0000:00:02.0: vgaarb: VGA device added: decodes=io+mem,owns=io+mem,locks=none
[ 0.200951] pci 0000:00:02.0: vgaarb: bridge control possible
[ 0.200951] vgaarb: loaded
[ 0.201013] EDAC MC: Ver: 3.0.0
[ 0.201280] PCI: Using ACPI for IRQ routing
[ 0.203794] PCI: pci_cache_line_size set to 64 bytes
[ 0.203912] e820: reserve RAM buffer [mem 0x7fb19000-0x7fffffff]
[ 0.204112] HPET: 4 timers in total, 0 timers will be used for per-cpu timer
[ 0.204118] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0
[ 0.204123] hpet0: 4 comparators, 64-bit 14.318180 MHz counter
[ 0.206173] clocksource: Switched to clocksource hpet
[ 0.224123] VFS: Disk quotas dquot_6.6.0
[ 0.224158] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[ 0.224287] pnp: PnP ACPI init
[ 0.224460] system 00:00: [mem 0xfed1c000-0xfed1ffff] has been reserved
[ 0.224463] system 00:00: [mem 0xfed14000-0xfed17fff] has been reserved
[ 0.224465] system 00:00: [mem 0xfed18000-0xfed18fff] has been reserved
[ 0.224468] system 00:00: [mem 0xfed19000-0xfed19fff] has been reserved
[ 0.224470] system 00:00: [mem 0xf0000000-0xf3ffffff] has been reserved
[ 0.224473] system 00:00: [mem 0xfed20000-0xfed3ffff] has been reserved
[ 0.224476] system 00:00: [mem 0xfed40000-0xfed44fff] has been reserved
[ 0.224478] system 00:00: [mem 0xfed45000-0xfed8ffff] has been reserved
[ 0.224484] system 00:00: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.225165] system 00:01: [mem 0xfed00000-0xfed003ff] has been reserved
[ 0.225170] system 00:01: Plug and Play ACPI device, IDs PNP0103 PNP0c01 (active)
[ 0.225253] system 00:02: [io 0x0800-0x080f] has been reserved
[ 0.225256] system 00:02: [io 0x0500-0x057f] has been reserved
[ 0.225259] system 00:02: [io 0x0580-0x05bf] has been reserved
[ 0.225263] system 00:02: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.225301] pnp 00:03: Plug and Play ACPI device, IDs PNP0b00 (active)
[ 0.225360] pnp 00:04: Plug and Play ACPI device, IDs PNP0303 PNP030b (active)
[ 0.225409] pnp 00:05: Plug and Play ACPI device, IDs PNP0f13 (active)
[ 0.225608] pnp: PnP ACPI: found 6 devices
[ 0.233176] clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns
[ 0.233239] pci 0000:00:1c.0: PCI bridge to [bus 01]
[ 0.233257] pci 0000:00:1c.1: PCI bridge to [bus 02]
[ 0.233264] pci 0000:00:1c.1: bridge window [mem 0xe1900000-0xe19fffff]
[ 0.233275] pci 0000:00:1c.2: PCI bridge to [bus 03]
[ 0.233282] pci 0000:00:1c.2: bridge window [mem 0xe1a00000-0xe1afffff]
[ 0.233293] pci 0000:00:1c.3: PCI bridge to [bus 04]
[ 0.233296] pci 0000:00:1c.3: bridge window [io 0x2000-0x2fff]
[ 0.233303] pci 0000:00:1c.3: bridge window [mem 0xe0000000-0xe08fffff]
[ 0.233308] pci 0000:00:1c.3: bridge window [mem 0xe0c00000-0xe13fffff 64bit pref]
[ 0.233316] pci 0000:00:1e.0: PCI bridge to [bus 05]
[ 0.233332] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7 window]
[ 0.233334] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff window]
[ 0.233337] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff window]
[ 0.233339] pci_bus 0000:00: resource 7 [mem 0x000c0000-0x000c3fff window]
[ 0.233341] pci_bus 0000:00: resource 8 [mem 0x000c8000-0x000cbfff window]
[ 0.233343] pci_bus 0000:00: resource 9 [mem 0x000cc000-0x000cffff window]
[ 0.233345] pci_bus 0000:00: resource 10 [mem 0x000d0000-0x000d3fff window]
[ 0.233347] pci_bus 0000:00: resource 11 [mem 0x000d4000-0x000d7fff window]
[ 0.233349] pci_bus 0000:00: resource 12 [mem 0x000d8000-0x000dbfff window]
[ 0.233351] pci_bus 0000:00: resource 13 [mem 0x000dc000-0x000dffff window]
[ 0.233354] pci_bus 0000:00: resource 14 [mem 0x000e0000-0x000e3fff window]
[ 0.233356] pci_bus 0000:00: resource 15 [mem 0x000e4000-0x000e7fff window]
[ 0.233358] pci_bus 0000:00: resource 16 [mem 0x000e8000-0x000ebfff window]
[ 0.233360] pci_bus 0000:00: resource 17 [mem 0x000ec000-0x000effff window]
[ 0.233362] pci_bus 0000:00: resource 18 [mem 0x000f0000-0x000fffff window]
[ 0.233364] pci_bus 0000:00: resource 19 [mem 0x90000000-0xfebfffff window]
[ 0.233366] pci_bus 0000:00: resource 20 [mem 0xfed40000-0xfed44fff window]
[ 0.233369] pci_bus 0000:02: resource 1 [mem 0xe1900000-0xe19fffff]
[ 0.233371] pci_bus 0000:03: resource 1 [mem 0xe1a00000-0xe1afffff]
[ 0.233374] pci_bus 0000:04: resource 0 [io 0x2000-0x2fff]
[ 0.233376] pci_bus 0000:04: resource 1 [mem 0xe0000000-0xe08fffff]
[ 0.233378] pci_bus 0000:04: resource 2 [mem 0xe0c00000-0xe13fffff 64bit pref]
[ 0.233380] pci_bus 0000:05: resource 4 [io 0x0000-0x0cf7 window]
[ 0.233382] pci_bus 0000:05: resource 5 [io 0x0d00-0xffff window]
[ 0.233385] pci_bus 0000:05: resource 6 [mem 0x000a0000-0x000bffff window]
[ 0.233387] pci_bus 0000:05: resource 7 [mem 0x000c0000-0x000c3fff window]
[ 0.233389] pci_bus 0000:05: resource 8 [mem 0x000c8000-0x000cbfff window]
[ 0.233391] pci_bus 0000:05: resource 9 [mem 0x000cc000-0x000cffff window]
[ 0.233393] pci_bus 0000:05: resource 10 [mem 0x000d0000-0x000d3fff window]
[ 0.233395] pci_bus 0000:05: resource 11 [mem 0x000d4000-0x000d7fff window]
[ 0.233397] pci_bus 0000:05: resource 12 [mem 0x000d8000-0x000dbfff window]
[ 0.233399] pci_bus 0000:05: resource 13 [mem 0x000dc000-0x000dffff window]
[ 0.233401] pci_bus 0000:05: resource 14 [mem 0x000e0000-0x000e3fff window]
[ 0.233403] pci_bus 0000:05: resource 15 [mem 0x000e4000-0x000e7fff window]
[ 0.233405] pci_bus 0000:05: resource 16 [mem 0x000e8000-0x000ebfff window]
[ 0.233407] pci_bus 0000:05: resource 17 [mem 0x000ec000-0x000effff window]
[ 0.233409] pci_bus 0000:05: resource 18 [mem 0x000f0000-0x000fffff window]
[ 0.233411] pci_bus 0000:05: resource 19 [mem 0x90000000-0xfebfffff window]
[ 0.233413] pci_bus 0000:05: resource 20 [mem 0xfed40000-0xfed44fff window]
[ 0.233541] NET: Registered protocol family 2
[ 0.233815] TCP established hash table entries: 65536 (order: 7, 524288 bytes)
[ 0.234103] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
[ 0.234561] TCP: Hash tables configured (established 65536 bind 65536)
[ 0.234627] UDP hash table entries: 4096 (order: 5, 131072 bytes)
[ 0.234696] UDP-Lite hash table entries: 4096 (order: 5, 131072 bytes)
[ 0.234809] NET: Registered protocol family 1
[ 0.234831] pci 0000:00:02.0: Video device with shadowed ROM at [mem 0x000c0000-0x000dffff]
[ 0.237401] PCI: CLS 64 bytes, default 64
[ 0.237458] Unpacking initramfs...
[ 0.838424] Freeing initrd memory: 20968K
[ 0.838535] PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
[ 0.838540] software IO TLB [mem 0x7bb19000-0x7fb19000] (64MB) mapped at [ffff8c9efbb19000-ffff8c9effb18fff]
[ 0.839076] audit: initializing netlink subsys (disabled)
[ 0.839184] audit: type=2000 audit(1505492446.840:1): state=initialized audit_enabled=0 res=1
[ 0.839682] workingset: timestamp_bits=40 max_order=21 bucket_order=0
[ 0.839713] zbud: loaded
[ 1.516100] Key type asymmetric registered
[ 1.516102] Asymmetric key parser 'x509' registered
[ 1.516119] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 249)
[ 1.516163] io scheduler noop registered
[ 1.516164] io scheduler deadline registered
[ 1.516179] io scheduler cfq registered (default)
[ 1.516181] io scheduler mq-deadline registered
[ 1.517415] pcieport 0000:00:1c.0: Signaling PME with IRQ 24
[ 1.517445] pcieport 0000:00:1c.1: Signaling PME with IRQ 25
[ 1.517473] pcieport 0000:00:1c.2: Signaling PME with IRQ 26
[ 1.517502] pcieport 0000:00:1c.3: Signaling PME with IRQ 27
[ 1.517546] efifb: probing for efifb
[ 1.517564] efifb: framebuffer at 0xd0000000, using 5120k, total 5120k
[ 1.517566] efifb: mode is 1440x900x32, linelength=5760, pages=1
[ 1.517567] efifb: scrolling: redraw
[ 1.517569] efifb: Truecolor: size=8:8:8:8, shift=24:16:8:0
[ 1.522198] Console: switching to colour frame buffer device 180x56
[ 1.526635] fb0: EFI VGA frame buffer device
[ 1.526646] intel_idle: does not run on family 6 model 23
[ 1.534956] Monitor-Mwait will be used to enter C-1 state
[ 1.534964] Monitor-Mwait will be used to enter C-2 state
[ 1.534967] Monitor-Mwait will be used to enter C-3 state
[ 1.534971] sched_clock: Marking unstable (1536687817, -1786336)<-(1643848077, -108946596)
[ 1.534973] tsc: Marking TSC unstable due to TSC halts in idle
[ 1.535362] GHES: HEST is not enabled!
[ 1.535483] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
[ 1.536175] Linux agpgart interface v0.103
[ 1.536393] AMD IOMMUv2 driver by Joerg Roedel <jroedel@suse.de>
[ 1.536394] AMD IOMMUv2 functionality not available on this system
[ 1.536666] i8042: PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at 0x60,0x64 irq 1,12
[ 1.548780] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 1.548786] serio: i8042 AUX port at 0x60,0x64 irq 12
[ 1.549010] mousedev: PS/2 mouse device common for all mice
[ 1.549071] rtc_cmos 00:03: RTC can wake from S4
[ 1.549262] rtc_cmos 00:03: rtc core: registered rtc_cmos as rtc0
[ 1.549294] rtc_cmos 00:03: alarms up to one month, y3k, 242 bytes nvram, hpet irqs
[ 1.549346] ledtrig-cpu: registered to indicate activity on CPUs
[ 1.549601] NET: Registered protocol family 10
[ 1.549893] Segment Routing with IPv6
[ 1.549914] mip6: Mobile IPv6
[ 1.549916] NET: Registered protocol family 17
[ 1.549919] mpls_gso: MPLS GSO support
[ 1.550122] microcode: sig=0x10676, pf=0x80, revision=0x0
[ 1.550182] microcode: Microcode Update Driver: v2.2.
[ 1.550439] registered taskstats version 1
[ 1.550460] zswap: loaded using pool lzo/zbud
[ 1.550597] ima: No TPM chip found, activating TPM-bypass! (rc=-19)
[ 1.551095] rtc_cmos 00:03: setting system clock to 2017-09-15 16:20:48 UTC (1505492448)
[ 1.551136] PM: Hibernation image not present or could not be loaded.
[ 1.553937] Freeing unused kernel memory: 1468K
[ 1.553939] Write protecting the kernel read-only data: 12288k
[ 1.554857] Freeing unused kernel memory: 1696K
[ 1.559662] Freeing unused kernel memory: 1188K
[ 1.562132] x86/mm: Checked W+X mappings: passed, no W+X pages found.
[ 1.563512] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input0
[ 1.793045] pps_core: LinuxPPS API ver. 1 registered
[ 1.793047] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it>
[ 1.793393] PTP clock support registered
[ 1.797855] e1000e: Intel(R) PRO/1000 Network Driver - 3.2.6-k
[ 1.797857] e1000e: Copyright(c) 1999 - 2015 Intel Corporation.
[ 1.798138] e1000e 0000:00:19.0: Interrupt Throttling Rate (ints/sec) set to dynamic conservative mode
[ 1.804302] ACPI: bus type USB registered
[ 1.804337] usbcore: registered new interface driver usbfs
[ 1.804351] usbcore: registered new interface driver hub
[ 1.805945] usbcore: registered new device driver usb
[ 1.806666] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 1.806895] ehci-pci: EHCI PCI platform driver
[ 1.807315] uhci_hcd: USB Universal Host Controller Interface driver
[ 1.812505] (NULL device *): hwmon_device_register() is deprecated. Please convert the driver to use hwmon_device_register_with_info().
[ 1.812839] thermal LNXTHERM:00: registered as thermal_zone0
[ 1.812840] ACPI: Thermal Zone [THM0] (59 C)
[ 1.813706] thermal LNXTHERM:01: registered as thermal_zone1
[ 1.813708] ACPI: Thermal Zone [THM1] (48 C)
[ 1.818477] xhci_hcd 0000:04:00.0: xHCI Host Controller
[ 1.818488] xhci_hcd 0000:04:00.0: new USB bus registered, assigned bus number 1
[ 1.819728] SCSI subsystem initialized
[ 1.826458] libata version 3.00 loaded.
[ 1.828365] xhci_hcd 0000:04:00.0: hcc params 0x0200f180 hci version 0x96 quirks 0x00080000
[ 1.828574] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
[ 1.828577] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.828579] usb usb1: Product: xHCI Host Controller
[ 1.828581] usb usb1: Manufacturer: Linux 4.12.0-1-amd64 xhci-hcd
[ 1.828583] usb usb1: SerialNumber: 0000:04:00.0
[ 1.828757] hub 1-0:1.0: USB hub found
[ 1.828773] hub 1-0:1.0: 2 ports detected
[ 1.828919] xhci_hcd 0000:04:00.0: xHCI Host Controller
[ 1.828925] xhci_hcd 0000:04:00.0: new USB bus registered, assigned bus number 2
[ 1.828956] usb usb2: We don't know the algorithms for LPM for this host, disabling LPM.
[ 1.828988] usb usb2: New USB device found, idVendor=1d6b, idProduct=0003
[ 1.828991] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.828993] usb usb2: Product: xHCI Host Controller
[ 1.828995] usb usb2: Manufacturer: Linux 4.12.0-1-amd64 xhci-hcd
[ 1.828997] usb usb2: SerialNumber: 0000:04:00.0
[ 1.829136] hub 2-0:1.0: USB hub found
[ 1.829152] hub 2-0:1.0: 2 ports detected
[ 1.850235] clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x35d05d0d116, max_idle_ns: 881590718006 ns
[ 2.012747] e1000e 0000:00:19.0 eth0: (PCI Express:2.5GT/s:Width x1) 00:1f:16:18:ee:48
[ 2.012750] e1000e 0000:00:19.0 eth0: Intel(R) PRO/1000 Network Connection
[ 2.012778] e1000e 0000:00:19.0 eth0: MAC: 7, PHY: 8, PBA No: FFFFFF-0FF
[ 2.012998] ehci-pci 0000:00:1a.7: EHCI Host Controller
[ 2.013008] ehci-pci 0000:00:1a.7: new USB bus registered, assigned bus number 3
[ 2.013024] ehci-pci 0000:00:1a.7: debug port 1
[ 2.016935] ehci-pci 0000:00:1a.7: cache line size of 64 is not supported
[ 2.016952] ehci-pci 0000:00:1a.7: irq 18, io mem 0xe1b26000
[ 2.030317] ehci-pci 0000:00:1a.7: USB 2.0 started, EHCI 1.00
[ 2.030393] usb usb3: New USB device found, idVendor=1d6b, idProduct=0002
[ 2.030396] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 2.030399] usb usb3: Product: EHCI Host Controller
[ 2.030401] usb usb3: Manufacturer: Linux 4.12.0-1-amd64 ehci_hcd
[ 2.030403] usb usb3: SerialNumber: 0000:00:1a.7
[ 2.030606] hub 3-0:1.0: USB hub found
[ 2.030617] hub 3-0:1.0: 6 ports detected
[ 2.031090] ehci-pci 0000:00:1d.7: EHCI Host Controller
[ 2.031098] ehci-pci 0000:00:1d.7: new USB bus registered, assigned bus number 4
[ 2.031112] ehci-pci 0000:00:1d.7: debug port 1
[ 2.035030] ehci-pci 0000:00:1d.7: cache line size of 64 is not supported
[ 2.035048] ehci-pci 0000:00:1d.7: irq 16, io mem 0xe1b27000
[ 2.050337] ehci-pci 0000:00:1d.7: USB 2.0 started, EHCI 1.00
[ 2.050389] usb usb4: New USB device found, idVendor=1d6b, idProduct=0002
[ 2.050392] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 2.050394] usb usb4: Product: EHCI Host Controller
[ 2.050396] usb usb4: Manufacturer: Linux 4.12.0-1-amd64 ehci_hcd
[ 2.050398] usb usb4: SerialNumber: 0000:00:1d.7
[ 2.050608] hub 4-0:1.0: USB hub found
[ 2.050618] hub 4-0:1.0: 6 ports detected
[ 2.051108] uhci_hcd 0000:00:1a.0: UHCI Host Controller
[ 2.051116] uhci_hcd 0000:00:1a.0: new USB bus registered, assigned bus number 5
[ 2.051125] uhci_hcd 0000:00:1a.0: detected 2 ports
[ 2.051148] uhci_hcd 0000:00:1a.0: irq 16, io base 0x00003020
[ 2.051217] usb usb5: New USB device found, idVendor=1d6b, idProduct=0001
[ 2.051220] usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 2.051222] usb usb5: Product: UHCI Host Controller
[ 2.051224] usb usb5: Manufacturer: Linux 4.12.0-1-amd64 uhci_hcd
[ 2.051226] usb usb5: SerialNumber: 0000:00:1a.0
[ 2.051561] hub 5-0:1.0: USB hub found
[ 2.051571] hub 5-0:1.0: 2 ports detected
[ 2.051727] ahci 0000:00:1f.2: version 3.0
[ 2.051951] ahci 0000:00:1f.2: SSS flag set, parallel bus scan disabled
[ 2.051981] ahci 0000:00:1f.2: AHCI 0001.0200 32 slots 4 ports 3 Gbps 0x3 impl SATA mode
[ 2.051984] ahci 0000:00:1f.2: flags: 64bit ncq sntf ilck stag pm led clo pio slum part ccc
[ 2.052660] scsi host0: ahci
[ 2.052800] scsi host1: ahci
[ 2.052932] scsi host2: ahci
[ 2.053060] scsi host3: ahci
[ 2.053133] ata1: SATA max UDMA/133 abar m2048@0xe1b25000 port 0xe1b25100 irq 32
[ 2.053136] ata2: SATA max UDMA/133 abar m2048@0xe1b25000 port 0xe1b25180 irq 32
[ 2.053138] ata3: DUMMY
[ 2.053139] ata4: DUMMY
[ 2.053337] i801_smbus 0000:00:1f.3: SMBus using PCI interrupt
[ 2.054465] uhci_hcd 0000:00:1a.1: UHCI Host Controller
[ 2.054473] uhci_hcd 0000:00:1a.1: new USB bus registered, assigned bus number 6
[ 2.054482] uhci_hcd 0000:00:1a.1: detected 2 ports
[ 2.054512] uhci_hcd 0000:00:1a.1: irq 17, io base 0x00003040
[ 2.054593] usb usb6: New USB device found, idVendor=1d6b, idProduct=0001
[ 2.054595] usb usb6: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 2.054597] usb usb6: Product: UHCI Host Controller
[ 2.054600] usb usb6: Manufacturer: Linux 4.12.0-1-amd64 uhci_hcd
[ 2.054602] usb usb6: SerialNumber: 0000:00:1a.1
[ 2.054885] hub 6-0:1.0: USB hub found
[ 2.054900] hub 6-0:1.0: 2 ports detected
[ 2.055171] uhci_hcd 0000:00:1a.2: UHCI Host Controller
[ 2.055179] uhci_hcd 0000:00:1a.2: new USB bus registered, assigned bus number 7
[ 2.055188] uhci_hcd 0000:00:1a.2: detected 2 ports
[ 2.055210] uhci_hcd 0000:00:1a.2: irq 18, io base 0x00003060
[ 2.055410] usb usb7: New USB device found, idVendor=1d6b, idProduct=0001
[ 2.055412] usb usb7: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 2.055415] usb usb7: Product: UHCI Host Controller
[ 2.055417] usb usb7: Manufacturer: Linux 4.12.0-1-amd64 uhci_hcd
[ 2.055419] usb usb7: SerialNumber: 0000:00:1a.2
[ 2.055602] hub 7-0:1.0: USB hub found
[ 2.055614] hub 7-0:1.0: 2 ports detected
[ 2.055887] uhci_hcd 0000:00:1d.0: UHCI Host Controller
[ 2.055895] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 8
[ 2.055903] uhci_hcd 0000:00:1d.0: detected 2 ports
[ 2.055927] uhci_hcd 0000:00:1d.0: irq 16, io base 0x00003080
[ 2.056052] usb usb8: New USB device found, idVendor=1d6b, idProduct=0001
[ 2.056055] usb usb8: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 2.056057] usb usb8: Product: UHCI Host Controller
[ 2.056059] usb usb8: Manufacturer: Linux 4.12.0-1-amd64 uhci_hcd
[ 2.056061] usb usb8: SerialNumber: 0000:00:1d.0
[ 2.056220] hub 8-0:1.0: USB hub found
[ 2.056231] hub 8-0:1.0: 2 ports detected
[ 2.056495] uhci_hcd 0000:00:1d.1: UHCI Host Controller
[ 2.056502] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 9
[ 2.056513] uhci_hcd 0000:00:1d.1: detected 2 ports
[ 2.056535] uhci_hcd 0000:00:1d.1: irq 17, io base 0x000030a0
[ 2.056663] usb usb9: New USB device found, idVendor=1d6b, idProduct=0001
[ 2.056666] usb usb9: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 2.056668] usb usb9: Product: UHCI Host Controller
[ 2.056670] usb usb9: Manufacturer: Linux 4.12.0-1-amd64 uhci_hcd
[ 2.056673] usb usb9: SerialNumber: 0000:00:1d.1
[ 2.056842] hub 9-0:1.0: USB hub found
[ 2.056852] hub 9-0:1.0: 2 ports detected
[ 2.057125] uhci_hcd 0000:00:1d.2: UHCI Host Controller
[ 2.057132] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 10
[ 2.057142] uhci_hcd 0000:00:1d.2: detected 2 ports
[ 2.057165] uhci_hcd 0000:00:1d.2: irq 18, io base 0x000030c0
[ 2.057228] usb usb10: New USB device found, idVendor=1d6b, idProduct=0001
[ 2.057230] usb usb10: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 2.057233] usb usb10: Product: UHCI Host Controller
[ 2.057235] usb usb10: Manufacturer: Linux 4.12.0-1-amd64 uhci_hcd
[ 2.057237] usb usb10: SerialNumber: 0000:00:1d.2
[ 2.057394] hub 10-0:1.0: USB hub found
[ 2.057403] hub 10-0:1.0: 2 ports detected
[ 2.241009] random: fast init done
[ 2.370141] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[ 2.372481] ata1.00: NCQ Send/Recv Log not supported
[ 2.372484] ata1.00: ATA-9: SAMSUNG MZMTE512HMHP-000MV, EXT42M0Q, max UDMA/133
[ 2.372486] ata1.00: 1000215216 sectors, multi 16: LBA48 NCQ (depth 31/32), AA
[ 2.373160] ata1.00: NCQ Send/Recv Log not supported
[ 2.373230] ata1.00: configured for UDMA/133
[ 2.373461] scsi 0:0:0:0: Direct-Access ATA SAMSUNG MZMTE512 2M0Q PQ: 0 ANSI: 5
[ 2.554331] usb 6-2: new full-speed USB device number 2 using uhci_hcd
[ 2.685921] psmouse serio1: trackpoint: IBM TrackPoint firmware: 0x0e, buttons: 3/3
[ 2.704602] input: TPPS/2 IBM TrackPoint as /devices/platform/i8042/serio1/input/input2
[ 2.729855] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[ 2.733929] ata2.00: ATAPI: HL-DT-ST DVDRW GS22N, CP06, max UDMA/133
[ 2.738753] ata2.00: configured for UDMA/133
[ 2.740364] usb 6-2: New USB device found, idVendor=0a5c, idProduct=21e6
[ 2.740367] usb 6-2: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[ 2.740369] usb 6-2: Product: BCM20702A0
[ 2.740371] usb 6-2: Manufacturer: Broadcom Corp
[ 2.740373] usb 6-2: SerialNumber: 2CD05A7FAEEC
[ 2.747295] scsi 1:0:0:0: CD-ROM HL-DT-ST DVDRW GS22N CP06 PQ: 0 ANSI: 5
[ 2.763515] sd 0:0:0:0: [sda] 1000215216 512-byte logical blocks: (512 GB/477 GiB)
[ 2.763535] sd 0:0:0:0: [sda] Write Protect is off
[ 2.763538] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 2.763570] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 2.767054] sda: sda1 sda2 sda3 sda4 sda5 sda6 sda7 sda8 sda9 sda10
[ 2.768092] sd 0:0:0:0: [sda] Attached SCSI disk
[ 2.781370] sr 1:0:0:0: [sr0] scsi3-mmc drive: 24x/24x writer cd/rw xa/form2 cdda caddy
[ 2.781372] cdrom: Uniform CD-ROM driver Revision: 3.20
[ 2.781523] sr 1:0:0:0: Attached scsi CD-ROM sr0
[ 3.010242] raid6: sse2x1 gen() 2575 MB/s
[ 3.078224] raid6: sse2x1 xor() 2702 MB/s
[ 3.146227] raid6: sse2x2 gen() 4126 MB/s
[ 3.214227] raid6: sse2x2 xor() 3318 MB/s
[ 3.250260] usb 3-5: new high-speed USB device number 3 using ehci-pci
[ 3.282226] raid6: sse2x4 gen() 4694 MB/s
[ 3.350228] raid6: sse2x4 xor() 3737 MB/s
[ 3.350230] raid6: using algorithm sse2x4 gen() 4694 MB/s
[ 3.350231] raid6: .... xor() 3737 MB/s, rmw enabled
[ 3.350232] raid6: using ssse3x2 recovery algorithm
[ 3.350537] xor: measuring software checksum speed
[ 3.390226] prefetch64-sse: 6533.000 MB/sec
[ 3.398647] usb 3-5: New USB device found, idVendor=17ef, idProduct=1005
[ 3.398649] usb 3-5: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[ 3.399174] hub 3-5:1.0: USB hub found
[ 3.399411] hub 3-5:1.0: 4 ports detected
[ 3.430223] generic_sse: 5759.000 MB/sec
[ 3.430225] xor: using function: prefetch64-sse (6533.000 MB/sec)
[ 3.430513] async_tx: api initialized (async)
[ 3.497187] Btrfs loaded, crc32c=crc32c-generic
[ 3.748740] EXT4-fs (sda4): mounted filesystem with ordered data mode. Opts: (null)
[ 3.873335] ip_tables: (C) 2000-2006 Netfilter Core Team
[ 3.880759] systemd[1]: systemd 234 running in system mode. (+PAM +AUDIT +SELINUX +IMA +APPARMOR +SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ +LZ4 +SECCOMP +BLKID +ELFUTILS +KMOD -IDN2 +IDN default-hierarchy=hybrid)
[ 3.880928] systemd[1]: Detected architecture x86-64.
[ 3.881118] systemd[1]: Set hostname to <universi-if9ee1>.
[ 4.054746] systemd[1]: Reached target Libvirt guests shutdown.
[ 4.054848] systemd[1]: Reached target System Time Synchronized.
[ 4.055091] systemd[1]: Created slice User and Session Slice.
[ 4.055153] systemd[1]: Listening on LVM2 metadata daemon socket.
[ 4.055207] systemd[1]: Listening on RPCbind Server Activation Socket.
[ 4.055304] systemd[1]: Listening on Journal Socket (/dev/log).
[ 4.055411] systemd[1]: Listening on Journal Audit Socket.
[ 4.101290] RPC: Registered named UNIX socket transport module.
[ 4.101292] RPC: Registered udp transport module.
[ 4.101293] RPC: Registered tcp transport module.
[ 4.101294] RPC: Registered tcp NFSv4.1 backchannel transport module.
[ 4.108841] EXT4-fs (sda4): re-mounted. Opts: discard,user_xattr,errors=remount-ro
[ 4.125081] lp: driver loaded but no devices found
[ 4.131258] ppdev: user-space parallel port driver
[ 4.168421] drbd: initialized. Version: 8.4.7 (api:1/proto:86-101)
[ 4.168423] drbd: srcversion: 36141A9226B7E2B3043CBC2
[ 4.168425] drbd: registered as block device major 147
[ 4.474850] input: Sleep Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/device:2a/PNP0C09:00/PNP0C0E:00/input/input3
[ 4.474857] ACPI: Sleep Button [SLPB]
[ 4.477664] input: Lid Switch as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/device:2a/PNP0C09:00/PNP0C0D:00/input/input4
[ 4.485891] ACPI: Lid Switch [LID]
[ 4.486030] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input5
[ 4.486036] ACPI: Power Button [PWRF]
[ 4.486617] ACPI: AC Adapter [AC] (on-line)
[ 4.486643] ACPI Exception: AE_NOT_FOUND, Error reading AC Adapter state (20170303/ac-139)
[ 4.488038] ACPI: Video Device [GFX0] (multi-head: yes rom: no post: no)
[ 4.497016] acpi device:04: registered as cooling_device2
[ 4.497133] input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:00/input/input6
[ 4.542111] Non-volatile memory driver v1.3
[ 4.550140] ACPI: Battery Slot [BAT0] (battery present)
[ 4.550331] ACPI: Battery Slot [BAT1] (battery absent)
[ 4.554982] thinkpad_acpi: ThinkPad ACPI Extras v0.25
[ 4.554983] thinkpad_acpi: http://ibm-acpi.sf.net/
[ 4.554984] thinkpad_acpi: ThinkPad BIOS CBET4000 4.6-1425-g6732b4fcdc, EC 7XHT25WW-3.6
[ 4.554985] thinkpad_acpi: Lenovo ThinkPad X200s, model 7470AE7
[ 4.562770] thinkpad_hwmon thinkpad_hwmon: hwmon_device_register() is deprecated. Please convert the driver to use hwmon_device_register_with_info().
[ 4.563013] thinkpad_acpi: Tablet mode switch found (type: MHKG), currently in laptop mode
[ 4.563031] thinkpad_acpi: This ThinkPad has standard ACPI backlight brightness control, supported by the ACPI video driver
[ 4.563032] thinkpad_acpi: Disabling thinkpad-acpi brightness events by default...
[ 4.567323] thinkpad_acpi: Standard ACPI backlight interface available, not loading native one
[ 4.567559] thinkpad_acpi: Console audio control enabled, mode: monitor (read only)
[ 4.570968] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[ 4.571683] pci 0000:00:00.0: Intel GM45 Chipset
[ 4.571732] pci 0000:00:00.0: detected gtt size: 2097152K total, 262144K mappable
[ 4.573534] pci 0000:00:00.0: detected 262144K stolen memory
[ 4.573576] [drm] Memory usable by graphics device = 2048M
[ 4.573580] checking generic (d0000000 500000) vs hw (d0000000 10000000)
[ 4.573581] fb: switching to inteldrmfb from EFI VGA
[ 4.573645] Console: switching to colour dummy device 80x25
[ 4.573800] input: ThinkPad Extra Buttons as /devices/platform/thinkpad_acpi/input/input7
[ 4.577683] snd_hda_codec_conexant hdaudioC0D0: CX20561 (Hermosa): BIOS auto-probing.
[ 4.579116] snd_hda_codec_conexant hdaudioC0D0: autoconfig for CX20561 (Hermosa): line_outs=1 (0x1a/0x0/0x0/0x0/0x0) type:speaker
[ 4.579118] snd_hda_codec_conexant hdaudioC0D0: speaker_outs=0 (0x0/0x0/0x0/0x0/0x0)
[ 4.579121] snd_hda_codec_conexant hdaudioC0D0: hp_outs=2 (0x19/0x16/0x0/0x0/0x0)
[ 4.579122] snd_hda_codec_conexant hdaudioC0D0: mono: mono_out=0x0
[ 4.579124] snd_hda_codec_conexant hdaudioC0D0: dig-out=0x1c/0x0
[ 4.579126] snd_hda_codec_conexant hdaudioC0D0: inputs:
[ 4.579128] snd_hda_codec_conexant hdaudioC0D0: Mic=0x18
[ 4.579130] snd_hda_codec_conexant hdaudioC0D0: Internal Mic=0x1d
[ 4.579132] snd_hda_codec_conexant hdaudioC0D0: Dock Mic=0x17
[ 4.580507] snd_hda_codec_conexant hdaudioC0D0: Enable sync_write for stable communication
[ 4.588512] [drm] Replacing VGA console driver
[ 4.588585] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
[ 4.588586] [drm] Driver supports precise vblank timestamp query.
[ 4.588594] i915 0000:00:02.0: Invalid PCI ROM data signature: expecting 0x52494350, got 0xe934aa55
[ 4.588603] [drm] Failed to find VBIOS tables (VBT)
[ 4.588942] i915 0000:00:02.0: vgaarb: changed VGA decodes: olddecodes=io+mem,decodes=io+mem:owns=io+mem
[ 4.597914] input: HDA Digital PCBeep as /devices/pci0000:00/0000:00:1b.0/sound/card0/input8
[ 4.598289] input: HDA Intel Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input9
[ 4.598330] input: HDA Intel Dock Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input10
[ 4.598368] input: HDA Intel Dock Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card0/input11
[ 4.598406] input: HDA Intel Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card0/input12
[ 4.626456] ath: phy0: Killer Wireless card detected
[ 4.637301] ath: phy0: ASPM enabled: 0x43
[ 4.637304] ath: EEPROM regdomain: 0x60
[ 4.637305] ath: EEPROM indicates we should expect a direct regpair map
[ 4.637307] ath: Country alpha2 being used: 00
[ 4.637308] ath: Regpair used: 0x60
[ 4.642705] ieee80211 phy0: Selected rate control algorithm 'minstrel_ht'
[ 4.643215] ieee80211 phy0: Atheros AR9300 Rev:3 mem=0xffffab7281300000, irq=17
[ 4.692519] ath: phy1: Enable LNA combining
[ 4.696838] ath: phy1: ASPM enabled: 0x43
[ 4.696840] ath: EEPROM regdomain: 0x65
[ 4.696841] ath: EEPROM indicates we should expect a direct regpair map
[ 4.696844] ath: Country alpha2 being used: 00
[ 4.696844] ath: Regpair used: 0x65
[ 4.698950] ieee80211 phy1: Selected rate control algorithm 'minstrel_ht'
[ 4.699434] ieee80211 phy1: Atheros AR9285 Rev:2 mem=0xffffab72812d0000, irq=18
[ 4.843036] [drm] RC6 disabled, disabling runtime PM support
[ 4.843505] [drm] Initialized i915 1.6.0 20170403 for 0000:00:02.0 on minor 0
[ 4.843717] ACPI Warning: SystemIO range 0x0000000000000528-0x000000000000052F conflicts with OpRegion 0x0000000000000500-0x000000000000057F (\PMIO) (20170303/utaddress-247)
[ 4.843723] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[ 4.843726] ACPI Warning: SystemIO range 0x00000000000005B0-0x00000000000005BF conflicts with OpRegion 0x0000000000000580-0x00000000000005BB (\GPIO) (20170303/utaddress-247)
[ 4.843730] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[ 4.843730] ACPI Warning: SystemIO range 0x0000000000000580-0x00000000000005AF conflicts with OpRegion 0x0000000000000580-0x00000000000005BB (\GPIO) (20170303/utaddress-247)
[ 4.843734] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[ 4.843735] lpc_ich: Resource conflict(s) found affecting gpio_ich
[ 4.891943] sd 0:0:0:0: Attached scsi generic sg0 type 0
[ 4.891988] sr 1:0:0:0: Attached scsi generic sg1 type 5
[ 5.070574] EXT4-fs (sda3): mounting ext2 file system using the ext4 subsystem
[ 5.093367] EXT4-fs (sda3): mounted filesystem without journal. Opts: discard,user_xattr
[ 5.115277] EXT4-fs (sda10): mounted filesystem with ordered data mode. Opts: discard,user_xattr
[ 5.144381] FAT-fs (sda2): Volume was not properly unmounted. Some data may be corrupt. Please run fsck.
[ 5.153498] EXT4-fs (sda8): mounted filesystem with ordered data mode. Opts: discard,user_xattr
[ 5.166059] EXT4-fs (sda7): mounted filesystem with ordered data mode. Opts: discard,user_xattr
[ 5.180654] EXT4-fs (sda6): mounted filesystem with ordered data mode. Opts: discard,user_xattr
[ 5.194851] EXT4-fs (sda5): mounted filesystem with ordered data mode. Opts: discard,user_xattr
[ 5.210502] systemd-journald[248]: Received request to flush runtime journal from PID 1
[ 5.230061] input: PC Speaker as /devices/platform/pcspkr/input/input13
[ 5.247317] EXT4-fs (sda9): mounted filesystem with ordered data mode. Opts: discard,user_xattr
[ 5.281043] intel_powerclamp: No package C-state available
[ 5.494571] iTCO_vendor_support: vendor-support=0
[ 5.495201] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.11
[ 5.495256] iTCO_wdt: Found a ICH9M-E TCO device (Version=2, TCOBASE=0x0560)
[ 5.496489] iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0)
[ 5.662243] random: crng init done
[ 5.927889] Bluetooth: Core ver 2.22
[ 5.928376] NET: Registered protocol family 31
[ 5.928377] Bluetooth: HCI device and connection manager initialized
[ 5.928381] Bluetooth: HCI socket layer initialized
[ 5.928384] Bluetooth: L2CAP socket layer initialized
[ 5.928392] Bluetooth: SCO socket layer initialized
[ 5.941447] usbcore: registered new interface driver btusb
[ 5.972057] nfc: nfc_init: NFC Core ver 0.1
[ 5.972212] NET: Registered protocol family 39
[ 6.058360] Bluetooth: hci0: BCM: chip id 63
[ 6.090365] Bluetooth: hci0: BCM20702A
[ 6.092349] Bluetooth: hci0: BCM20702A1 (001.002.014) build 0000
[ 6.092522] bluetooth hci0: firmware: failed to load brcm/BCM20702A1-0a5c-21e6.hcd (-2)
[ 6.092530] bluetooth hci0: Direct firmware load for brcm/BCM20702A1-0a5c-21e6.hcd failed with error -2
[ 6.092532] Bluetooth: hci0: BCM: Patch brcm/BCM20702A1-0a5c-21e6.hcd not found
[ 6.284202] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
[ 6.284204] Bluetooth: BNEP filters: protocol multicast
[ 6.284209] Bluetooth: BNEP socket layer initialized
[ 6.668383] fbcon: inteldrmfb (fb0) is primary device
[ 7.278097] Console: switching to colour frame buffer device 180x56
[ 7.301597] i915 0000:00:02.0: fb0: inteldrmfb frame buffer device
[ 7.842696] ip6_tables: (C) 2000-2006 Netfilter Core Team
[ 7.895328] Ebtables v2.0 registered
[ 14.932692] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 15.138485] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 15.152338] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
[ 15.163216] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
[ 15.180023] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
[ 15.192877] IPv6: ADDRCONF(NETDEV_UP): wlan1: link is not ready
[ 15.207885] IPv6: ADDRCONF(NETDEV_UP): wlan1: link is not ready
[ 15.230096] IPv6: ADDRCONF(NETDEV_UP): wlan1: link is not ready
[ 16.112078] IPv6: ADDRCONF(NETDEV_UP): wlan1: link is not ready
[ 16.125893] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
[ 19.972887] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
[ 20.030502] wlan0: authenticate with f8:1a:67:5a:c4:75
[ 20.043309] wlan0: send auth to f8:1a:67:5a:c4:75 (try 1/3)
[ 20.045568] wlan0: authenticated
[ 20.046399] wlan0: associate with f8:1a:67:5a:c4:75 (try 1/3)
[ 20.047955] wlan0: RX AssocResp from f8:1a:67:5a:c4:75 (capab=0x11 status=0 aid=3)
[ 20.048055] wlan0: associated
[ 20.048092] IPv6: ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
[ 20.093202] ath: EEPROM regdomain: 0x809c
[ 20.093204] ath: EEPROM indicates we should expect a country code
[ 20.093205] ath: doing EEPROM country->regdmn map search
[ 20.093206] ath: country maps to regdmn code: 0x52
[ 20.093207] ath: Country alpha2 being used: CN
[ 20.093208] ath: Regpair used: 0x52
[ 20.093209] ath: regdomain 0x809c dynamically updated by country IE
[ 20.096700] ath: EEPROM regdomain: 0x809c
[ 20.096701] ath: EEPROM indicates we should expect a country code
[ 20.096702] ath: doing EEPROM country->regdmn map search
[ 20.096703] ath: country maps to regdmn code: 0x52
[ 20.096704] ath: Country alpha2 being used: CN
[ 20.096705] ath: Regpair used: 0x52
[ 20.096706] ath: regdomain 0x809c dynamically updated by country IE
[ 23.116198] thinkpad_ec: loading out-of-tree module taints kernel.
[ 23.117490] thinkpad_ec: thinkpad_ec 0.42 loaded.
[ 23.121924] tp_smapi 0.42 loading...
[ 23.121932] SMAPI not supported (ID=0x67)
[ 23.121936] tp_smapi init failed (ret=-6)!
[ 23.187620] tp_smapi 0.42 loading...
[ 23.187629] SMAPI not supported (ID=0x67)
[ 23.187633] tp_smapi init failed (ret=-6)!
[ 25.098269] Bluetooth: RFCOMM TTY layer initialized
[ 25.098274] Bluetooth: RFCOMM socket layer initialized
[ 25.098280] Bluetooth: RFCOMM ver 1.11
[ 358.027761] IPv6: ADDRCONF(NETDEV_UP): wlan1: link is not ready
[ 673.030482] IPv6: ADDRCONF(NETDEV_UP): wlan1: link is not ready