blob: 0df0e5500d46a1ba09453ef18af8afba8e9969c1 [file] [log] [blame]
[ 0.000000] Initializing cgroup subsys cpuset
[ 0.000000] Initializing cgroup subsys cpu
[ 0.000000] Initializing cgroup subsys cpuacct
[ 0.000000] Linux version 3.16.0-4-amd64 (debian-kernel@lists.debian.org) (gcc version 4.8.4 (Debian 4.8.4-1) ) #1 SMP Debian 3.16.7-ckt9-2 (2015-04-13)
[ 0.000000] Command line: root=/dev/nfs initrd=initrd-cb-test-tgt-i386 rootfstype=nfs nfsroot=10.100.1.100:/nfsroots/cb-test-tgt-02,v3,hard,nointr,tcp ip=10.100.1.11::10.100.1.1:255.255.255.0:embed-o-matic:eth0:off console=ttyS0,115200n8 consoleblank=0 rw BOOT_IMAGE=vmlinuz-cb-test-tgt-i386
[ 0.000000] e820: BIOS-provided physical RAM map:
[ 0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009fbff] usable
[ 0.000000] BIOS-e820: [mem 0x000000000009fc00-0x000000000009ffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000000f0000-0x00000000000fffff] reserved
[ 0.000000] BIOS-e820: [mem 0x0000000000100000-0x000000001ff9ffff] usable
[ 0.000000] BIOS-e820: [mem 0x000000001ffa0000-0x000000001fffffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000b0000000-0x00000000bfffffff] reserved
[ 0.000000] NX (Execute Disable) protection: active
[ 0.000000] SMBIOS 2.7 present.
[ 0.000000] DMI: Emulation QEMU x86 q35/ich9/QEMU x86 q35/ich9, BIOS 4.6-912-ge48b3db-dirty 07/31/2017
[ 0.000000] Hypervisor detected: KVM
[ 0.000000] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
[ 0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable
[ 0.000000] AGP: No AGP bridge found
[ 0.000000] e820: last_pfn = 0x1ffa0 max_arch_pfn = 0x400000000
[ 0.000000] MTRR default type: uncachable
[ 0.000000] MTRR fixed ranges disabled:
[ 0.000000] 00000-FFFFF uncachable
[ 0.000000] MTRR variable ranges disabled:
[ 0.000000] 0 disabled
[ 0.000000] 1 disabled
[ 0.000000] 2 disabled
[ 0.000000] 3 disabled
[ 0.000000] 4 disabled
[ 0.000000] 5 disabled
[ 0.000000] 6 disabled
[ 0.000000] 7 disabled
[ 0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
[ 0.000000] CPU MTRRs all blank - virtualized system.
[ 0.000000] Base memory trampoline at [ffff880000099000] 99000 size 24576
[ 0.000000] init_memory_mapping: [mem 0x00000000-0x000fffff]
[ 0.000000] [mem 0x00000000-0x000fffff] page 4k
[ 0.000000] BRK [0x01af4000, 0x01af4fff] PGTABLE
[ 0.000000] BRK [0x01af5000, 0x01af5fff] PGTABLE
[ 0.000000] BRK [0x01af6000, 0x01af6fff] PGTABLE
[ 0.000000] init_memory_mapping: [mem 0x1ee00000-0x1effffff]
[ 0.000000] [mem 0x1ee00000-0x1effffff] page 2M
[ 0.000000] init_memory_mapping: [mem 0x1c000000-0x1edfffff]
[ 0.000000] [mem 0x1c000000-0x1edfffff] page 2M
[ 0.000000] init_memory_mapping: [mem 0x00100000-0x1bffffff]
[ 0.000000] [mem 0x00100000-0x001fffff] page 4k
[ 0.000000] [mem 0x00200000-0x1bffffff] page 2M
[ 0.000000] init_memory_mapping: [mem 0x1f000000-0x1ff9ffff]
[ 0.000000] [mem 0x1f000000-0x1fdfffff] page 2M
[ 0.000000] [mem 0x1fe00000-0x1ff9ffff] page 4k
[ 0.000000] BRK [0x01af7000, 0x01af7fff] PGTABLE
[ 0.000000] RAMDISK: [mem 0x1f0c7000-0x1fe79fff]
[ 0.000000] ACPI: Early table checksum verification disabled
[ 0.000000] ACPI: RSDP 0x00000000000F75F0 000024 (v02 CORE )
[ 0.000000] ACPI: XSDT 0x000000001FFB10E0 000054 (v01 CORE COREBOOT 00000000 CORE 00000000)
[ 0.000000] ACPI: FACP 0x000000001FFB2DC0 0000F4 (v03 CORE COREBOOT 00000000 CORE 00000000)
[ 0.000000] ACPI: DSDT 0x000000001FFB1280 001B38 (v01 CORE COREBOOT 00000002 INTL 20160831)
[ 0.000000] ACPI: FACS 0x000000001FFB1240 000040
[ 0.000000] ACPI: SSDT 0x000000001FFB2EC0 000068 (v02 CORE COREBOOT 0000002A CORE 0000002A)
[ 0.000000] ACPI: MCFG 0x000000001FFB2F30 00003C (v01 CORE COREBOOT 00000000 CORE 00000000)
[ 0.000000] ACPI: TCPA 0x000000001FFB2F70 000032 (v02 CORE COREBOOT 00000000 CORE 00000000)
[ 0.000000] ACPI: APIC 0x000000001FFB2FB0 000054 (v01 CORE COREBOOT 00000000 CORE 00000000)
[ 0.000000] ACPI: HPET 0x000000001FFB3010 000038 (v01 CORE COREBOOT 00000000 CORE 00000000)
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] No NUMA configuration found
[ 0.000000] Faking a node at [mem 0x0000000000000000-0x000000001ff9ffff]
[ 0.000000] Initmem setup node 0 [mem 0x00000000-0x1ff9ffff]
[ 0.000000] NODE_DATA [mem 0x1ff9b000-0x1ff9ffff]
[ 0.000000] kvm-clock: Using msrs 4b564d01 and 4b564d00
[ 0.000000] kvm-clock: cpu 0, msr 0:1ff93001, primary cpu clock
[ 0.000000] [ffffea0000000000-ffffea00007fffff] PMD -> [ffff88001e000000-ffff88001e7fffff] on node 0
[ 0.000000] Zone ranges:
[ 0.000000] DMA [mem 0x00001000-0x00ffffff]
[ 0.000000] DMA32 [mem 0x01000000-0xffffffff]
[ 0.000000] Normal empty
[ 0.000000] Movable zone start for each node
[ 0.000000] Early memory node ranges
[ 0.000000] node 0: [mem 0x00001000-0x0009efff]
[ 0.000000] node 0: [mem 0x00100000-0x1ff9ffff]
[ 0.000000] On node 0 totalpages: 130878
[ 0.000000] DMA zone: 56 pages used for memmap
[ 0.000000] DMA zone: 21 pages reserved
[ 0.000000] DMA zone: 3998 pages, LIFO batch:0
[ 0.000000] DMA32 zone: 1735 pages used for memmap
[ 0.000000] DMA32 zone: 126880 pages, LIFO batch:31
[ 0.000000] ACPI: PM-Timer IO Port: 0x608
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
[ 0.000000] ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
[ 0.000000] IOAPIC[0]: apic_id 2, version 17, address 0xfec00000, GSI 0-23
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[ 0.000000] ACPI: IRQ0 used by override.
[ 0.000000] ACPI: IRQ2 used by override.
[ 0.000000] ACPI: IRQ9 used by override.
[ 0.000000] Using ACPI (MADT) for SMP configuration information
[ 0.000000] ACPI: HPET id: 0x8086a201 base: 0xfed00000
[ 0.000000] smpboot: Allowing 1 CPUs, 0 hotplug CPUs
[ 0.000000] nr_irqs_gsi: 40
[ 0.000000] PM: Registered nosave memory: [mem 0x0009f000-0x0009ffff]
[ 0.000000] PM: Registered nosave memory: [mem 0x000a0000-0x000effff]
[ 0.000000] PM: Registered nosave memory: [mem 0x000f0000-0x000fffff]
[ 0.000000] e820: [mem 0x20000000-0xafffffff] available for PCI devices
[ 0.000000] Booting paravirtualized kernel on KVM
[ 0.000000] setup_percpu: NR_CPUS:512 nr_cpumask_bits:512 nr_cpu_ids:1 nr_node_ids:1
[ 0.000000] PERCPU: Embedded 27 pages/cpu @ffff88001ee00000 s80896 r8192 d21504 u2097152
[ 0.000000] pcpu-alloc: s80896 r8192 d21504 u2097152 alloc=1*2097152
[ 0.000000] pcpu-alloc: [0] 0
[ 0.000000] KVM setup async PF for cpu 0
[ 0.000000] kvm-stealtime: cpu 0, msr 1ee0d080
[ 0.000000] Built 1 zonelists in Node order, mobility grouping on. Total pages: 129066
[ 0.000000] Policy zone: DMA32
[ 0.000000] Kernel command line: root=/dev/nfs initrd=initrd-cb-test-tgt-i386 rootfstype=nfs nfsroot=10.100.1.100:/nfsroots/cb-test-tgt-02,v3,hard,nointr,tcp ip=10.100.1.11::10.100.1.1:255.255.255.0:embed-o-matic:eth0:off console=ttyS0,115200n8 consoleblank=0 rw BOOT_IMAGE=vmlinuz-cb-test-tgt-i386
[ 0.000000] PID hash table entries: 2048 (order: 2, 16384 bytes)
[ 0.000000] AGP: Checking aperture...
[ 0.000000] AGP: No AGP bridge found
[ 0.000000] Calgary: detecting Calgary via BIOS EBDA area
[ 0.000000] Calgary: Unable to locate Rio Grande table in EBDA - bailing!
[ 0.000000] Memory: 489580K/523512K available (5207K kernel code, 946K rwdata, 1832K rodata, 1204K init, 840K bss, 33932K reserved)
[ 0.000000] Hierarchical RCU implementation.
[ 0.000000] RCU dyntick-idle grace-period acceleration is enabled.
[ 0.000000] RCU restricting CPUs from NR_CPUS=512 to nr_cpu_ids=1.
[ 0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=1
[ 0.000000] NR_IRQS:33024 nr_irqs:256 16
[ 0.000000] Console: colour VGA+ 80x25
[ 0.000000] console [ttyS0] enabled
[ 0.000000] hpet clockevent registered
[ 0.000000] tsc: Detected 1600.019 MHz processor
[ 0.008000] Calibrating delay loop (skipped) preset value.. 3200.03 BogoMIPS (lpj=6400076)
[ 0.009198] pid_max: default: 32768 minimum: 301
[ 0.011133] ACPI: Core revision 20140424
[ 0.014242] ACPI: All ACPI Tables successfully acquired
[ 0.017525] Security Framework initialized
[ 0.019255] AppArmor: AppArmor disabled by boot time parameter
[ 0.020009] Yama: disabled by default; enable with sysctl kernel.yama.*
[ 0.024102] Dentry cache hash table entries: 65536 (order: 7, 524288 bytes)
[ 0.028243] Inode-cache hash table entries: 32768 (order: 6, 262144 bytes)
[ 0.031218] Mount-cache hash table entries: 1024 (order: 1, 8192 bytes)
[ 0.032014] Mountpoint-cache hash table entries: 1024 (order: 1, 8192 bytes)
[ 0.036356] Initializing cgroup subsys memory
[ 0.038221] Initializing cgroup subsys devices
[ 0.040023] Initializing cgroup subsys freezer
[ 0.041883] Initializing cgroup subsys net_cls
[ 0.044019] Initializing cgroup subsys blkio
[ 0.045783] Initializing cgroup subsys perf_event
[ 0.048012] Initializing cgroup subsys net_prio
[ 0.050081] mce: CPU supports 10 MCE banks
[ 0.052121] Last level iTLB entries: 4KB 0, 2MB 0, 4MB 0
Last level dTLB entries: 4KB 0, 2MB 0, 4MB 0, 1GB 0
tlb_flushall_shift: -1
[ 0.075020] Freeing SMP alternatives memory: 20K (ffffffff81a1b000 - ffffffff81a20000)
[ 0.086335] ftrace: allocating 21614 entries in 85 pages
[ 0.103060] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=0 pin2=0
[ 0.104005] smpboot: CPU0: AMD Intel(R) Core(TM)2 Duo CPU T7700 @ 2.40GHz (fam: 06, model: 0f, stepping: 0b)
[ 0.112000] Performance Events: Broken PMU hardware detected, using software events only.
[ 0.112007] Failed to access perfctr msr (MSR c0010001 is ffffffffffffffff)
[ 0.120387] x86: Booted up 1 node, 1 CPUs
[ 0.122005] smpboot: Total of 1 processors activated (3200.03 BogoMIPS)
[ 0.124655] NMI watchdog: disabled (cpu0): hardware events not enabled
[ 0.128129] devtmpfs: initialized
[ 0.136742] pinctrl core: initialized pinctrl subsystem
[ 0.138900] NET: Registered protocol family 16
[ 0.140273] cpuidle: using governor ladder
[ 0.141861] cpuidle: using governor menu
[ 0.144224] ACPI: bus type PCI registered
[ 0.145763] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
[ 0.148297] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xb0000000-0xbfffffff] (base 0xb0000000)
[ 0.152005] PCI: MMCONFIG at [mem 0xb0000000-0xbfffffff] reserved in E820
[ 0.155416] PCI: Using configuration type 1 for base access
[ 0.157956] ACPI: Added _OSI(Module Device)
[ 0.160005] ACPI: Added _OSI(Processor Device)
[ 0.161748] ACPI: Added _OSI(3.0 _SCP Extensions)
[ 0.164004] ACPI: Added _OSI(Processor Aggregator Device)
[ 0.175459] ACPI: Interpreter enabled
[ 0.176009] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S1_] (20140424/hwxface-580)
[ 0.180005] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S2_] (20140424/hwxface-580)
[ 0.184005] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S3_] (20140424/hwxface-580)
[ 0.187718] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S4_] (20140424/hwxface-580)
[ 0.190201] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S5_] (20140424/hwxface-580)
[ 0.194237] ACPI: (supports S0)
[ 0.196004] ACPI: Using IOAPIC for interrupt routing
[ 0.198081] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
[ 0.207457] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
[ 0.208010] acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI]
[ 0.212491] acpi PNP0A08:00: _OSC: OS now controls [PCIeHotplug PME AER PCIeCapability]
[ 0.216222] PCI host bridge to bus 0000:00
[ 0.217803] pci_bus 0000:00: root bus resource [bus 00-ff]
[ 0.220006] pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7]
[ 0.222457] pci_bus 0000:00: root bus resource [io 0x0d00-0xffff]
[ 0.224006] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff]
[ 0.228005] pci_bus 0000:00: root bus resource [mem 0xe0000000-0xfebfffff]
[ 0.230788] pci 0000:00:00.0: [8086:29c0] type 00 class 0x060000
[ 0.231654] pci 0000:00:01.0: [1013:00b8] type 00 class 0x030000
[ 0.236006] pci 0000:00:01.0: reg 0x10: [mem 0xfc000000-0xfdffffff pref]
[ 0.242635] pci 0000:00:01.0: reg 0x14: [mem 0xfe070000-0xfe070fff]
[ 0.268007] pci 0000:00:01.0: reg 0x30: [mem 0xfe060000-0xfe06ffff pref]
[ 0.268364] pci 0000:00:02.0: [8086:100e] type 00 class 0x020000
[ 0.272006] pci 0000:00:02.0: reg 0x10: [mem 0xfe040000-0xfe05ffff]
[ 0.278489] pci 0000:00:02.0: reg 0x14: [io 0x5800-0x583f]
[ 0.304006] pci 0000:00:02.0: reg 0x30: [mem 0xfe000000-0xfe03ffff pref]
[ 0.304894] pci 0000:00:1f.0: [8086:2918] type 00 class 0x060100
[ 0.305929] pci 0000:00:1f.0: quirk: [io 0x0600-0x067f] claimed by ICH6 ACPI/GPIO/TCO
[ 0.308048] pci 0000:00:1f.0: quirk: [io 0x0580-0x05bf] claimed by ICH6 GPIO
[ 0.312235] pci 0000:00:1f.2: [8086:2922] type 00 class 0x010601
[ 0.336006] pci 0000:00:1f.2: reg 0x20: [io 0x5840-0x585f]
[ 0.340006] pci 0000:00:1f.2: reg 0x24: [mem 0xfe071000-0xfe071fff]
[ 0.348006] pci 0000:00:1f.3: [8086:2930] type 00 class 0x0c0500
[ 0.348524] pci 0000:00:1f.3: reg 0x20: [io 0x0000-0x003f]
[ 0.349728] ACPI: PCI Interrupt Link [LNKA] (IRQs 5 10 11) *0
[ 0.352363] ACPI: PCI Interrupt Link [LNKB] (IRQs 5 10 11) *0
[ 0.355017] ACPI: PCI Interrupt Link [LNKC] (IRQs 5 10 11) *0
[ 0.356955] ACPI: PCI Interrupt Link [LNKD] (IRQs 5 10 11) *0
[ 0.360359] ACPI: PCI Interrupt Link [LNKE] (IRQs 5 10 11) *0
[ 0.363080] ACPI: PCI Interrupt Link [LNKF] (IRQs 5 10 11) *0
[ 0.364981] ACPI: PCI Interrupt Link [LNKG] (IRQs 5 10 11) *0
[ 0.368490] ACPI: PCI Interrupt Link [LNKH] (IRQs 5 10 11) *0
[ 0.370941] ACPI: PCI Interrupt Link [GSIA] (IRQs *16)
[ 0.372372] ACPI: PCI Interrupt Link [GSIB] (IRQs *17)
[ 0.374434] ACPI: PCI Interrupt Link [GSIC] (IRQs *18)
[ 0.376403] ACPI: PCI Interrupt Link [GSID] (IRQs *19)
[ 0.378551] ACPI: PCI Interrupt Link [GSIE] (IRQs *20)
[ 0.380385] ACPI: PCI Interrupt Link [GSIF] (IRQs *21)
[ 0.382569] ACPI: PCI Interrupt Link [GSIG] (IRQs *22)
[ 0.384399] ACPI: PCI Interrupt Link [GSIH] (IRQs *23)
[ 0.388764] ACPI: Enabled 16 GPEs in block 00 to 3F
[ 0.391019] vgaarb: setting as boot device: PCI:0000:00:01.0
[ 0.392000] vgaarb: device added: PCI:0000:00:01.0,decodes=io+mem,owns=io+mem,locks=none
[ 0.392004] vgaarb: loaded
[ 0.393088] vgaarb: bridge control possible 0000:00:01.0
[ 0.395255] PCI: Using ACPI for IRQ routing
[ 0.551266] PCI: pci_cache_line_size set to 64 bytes
[ 0.551511] e820: reserve RAM buffer [mem 0x0009fc00-0x0009ffff]
[ 0.551516] e820: reserve RAM buffer [mem 0x1ffa0000-0x1fffffff]
[ 0.551832] HPET: 3 timers in total, 0 timers will be used for per-cpu timer
[ 0.552046] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0
[ 0.556514] hpet0: 3 comparators, 64-bit 100.000000 MHz counter
[ 0.561301] Switched to clocksource kvm-clock
[ 0.576428] pnp: PnP ACPI init
[ 0.577779] ACPI: bus type PNP registered
[ 0.579460] pnp 00:00: Plug and Play ACPI device, IDs PNP0b00 (active)
[ 0.579587] pnp 00:01: Plug and Play ACPI device, IDs PNP0303 (active)
[ 0.579700] pnp 00:02: Plug and Play ACPI device, IDs PNP0f13 (active)
[ 0.579940] pnp 00:03: Plug and Play ACPI device, IDs PNP0400 (active)
[ 0.580135] pnp 00:04: Plug and Play ACPI device, IDs PNP0501 (active)
[ 0.580891] pnp: PnP ACPI: found 5 devices
[ 0.582447] ACPI: bus type PNP unregistered
[ 0.592765] pci 0000:00:1f.3: BAR 4: assigned [io 0x1000-0x103f]
[ 0.595170] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7]
[ 0.595174] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff]
[ 0.595178] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff]
[ 0.595182] pci_bus 0000:00: resource 7 [mem 0xe0000000-0xfebfffff]
[ 0.595233] NET: Registered protocol family 2
[ 0.597265] TCP established hash table entries: 4096 (order: 3, 32768 bytes)
[ 0.599948] TCP bind hash table entries: 4096 (order: 4, 65536 bytes)
[ 0.602580] TCP: Hash tables configured (established 4096 bind 4096)
[ 0.605163] TCP: reno registered
[ 0.606456] UDP hash table entries: 256 (order: 1, 8192 bytes)
[ 0.608783] UDP-Lite hash table entries: 256 (order: 1, 8192 bytes)
[ 0.611303] NET: Registered protocol family 1
[ 0.613145] pci 0000:00:01.0: Video device with shadowed ROM
[ 0.613257] PCI: CLS 64 bytes, default 64
[ 0.613333] Unpacking initramfs...
[ 1.138555] Freeing initrd memory: 14028K (ffff88001f0c7000 - ffff88001fe7a000)
[ 1.141904] microcode: AMD CPU family 0x6 not supported
[ 1.144559] futex hash table entries: 256 (order: 2, 16384 bytes)
[ 1.147053] audit: initializing netlink subsys (disabled)
[ 1.149205] audit: type=2000 audit(1501513944.968:1): initialized
[ 1.152044] HugeTLB registered 2 MB page size, pre-allocated 0 pages
[ 1.154529] zbud: loaded
[ 1.155733] VFS: Disk quotas dquot_6.5.2
[ 1.157312] Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[ 1.159831] msgmni has been set to 983
[ 1.161816] alg: No test for stdrng (krng)
[ 1.163410] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252)
[ 1.166333] io scheduler noop registered
[ 1.167838] io scheduler deadline registered
[ 1.169577] io scheduler cfq registered (default)
[ 1.171501] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[ 1.173701] pciehp: PCI Express Hot Plug Controller Driver version: 0.4
[ 1.176323] GHES: HEST is not enabled!
[ 1.178182] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
[ 1.217210] 00:04: ttyS0 at I/O 0x3f8 (irq = 4, base_baud = 115200) is a 16550A
[ 1.221081] Linux agpgart interface v0.103
[ 1.223016] i8042: PNP: PS/2 Controller [PNP0303:KBD,PNP0f13:MOU] at 0x60,0x64 irq 1,12
[ 1.227732] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 1.229693] serio: i8042 AUX port at 0x60,0x64 irq 12
[ 1.231896] mousedev: PS/2 mouse device common for all mice
[ 1.234731] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input0
[ 1.238127] rtc_cmos 00:00: RTC can wake from S4
[ 1.240905] rtc_cmos 00:00: rtc core: registered rtc_cmos as rtc0
[ 1.243757] rtc_cmos 00:00: alarms up to one month, y3k, 114 bytes nvram, hpet irqs
[ 1.246820] ledtrig-cpu: registered to indicate activity on CPUs
[ 1.249371] AMD IOMMUv2 driver by Joerg Roedel <joerg.roedel@amd.com>
[ 1.251875] AMD IOMMUv2 functionality not available on this system
[ 1.254518] TCP: cubic registered
[ 1.255871] NET: Registered protocol family 10
[ 1.257987] mip6: Mobile IPv6
[ 1.259180] NET: Registered protocol family 17
[ 1.261558] mpls_gso: MPLS GSO support
[ 1.263869] registered taskstats version 1
[ 1.266572] rtc_cmos 00:00: setting system clock to 2017-07-31 15:12:24 UTC (1501513944)
[ 1.270644] PM: Hibernation image not present or could not be loaded.
[ 1.273246] Freeing unused kernel memory: 1204K (ffffffff818ee000 - ffffffff81a1b000)
[ 1.277141] Write protecting the kernel read-only data: 8192k
[ 1.286629] Freeing unused kernel memory: 924K (ffff880001519000 - ffff880001600000)
[ 1.292215] Freeing unused kernel memory: 216K (ffff8800017ca000 - ffff880001800000)
[ 1.316228] systemd-udevd[52]: starting version 215
[ 1.319378] random: systemd-udevd urandom read with 3 bits of entropy available
[ 1.342050] e1000: Intel(R) PRO/1000 Network Driver - version 7.3.21-k8-NAPI
[ 1.345663] e1000: Copyright (c) 1999-2006 Intel Corporation.
[ 1.362253] Floppy drive(s): fd0 is 1.44M
[ 1.364569] SCSI subsystem initialized
[ 1.376999] ACPI: PCI Interrupt Link [GSIG] enabled at IRQ 22
[ 1.389022] FDC 0 is a S82078B
[ 1.394735] libata version 3.00 loaded.
[ 1.825543] e1000 0000:00:02.0 eth0: (PCI:33MHz:32-bit) 80:80:80:80:80:ff
[ 1.828974] e1000 0000:00:02.0 eth0: Intel(R) PRO/1000 Network Connection
[ 1.832286] ahci 0000:00:1f.2: version 3.0
[ 1.832989] ACPI: PCI Interrupt Link [GSIA] enabled at IRQ 16
[ 1.837394] ahci 0000:00:1f.2: irq 40 for MSI/MSI-X
[ 1.838341] ahci 0000:00:1f.2: AHCI 0001.0000 32 slots 6 ports 1.5 Gbps 0x3f impl SATA mode
[ 1.842520] ahci 0000:00:1f.2: flags: ncq only
[ 1.848100] scsi0 : ahci
[ 1.849736] scsi1 : ahci
[ 1.851275] scsi2 : ahci
[ 1.852863] scsi3 : ahci
[ 1.854395] scsi4 : ahci
[ 1.855948] scsi5 : ahci
[ 1.857507] ata1: SATA max UDMA/133 abar m4096@0xfe071000 port 0xfe071100 irq 40
[ 1.861258] ata2: SATA max UDMA/133 abar m4096@0xfe071000 port 0xfe071180 irq 40
[ 1.864974] ata3: SATA max UDMA/133 abar m4096@0xfe071000 port 0xfe071200 irq 40
[ 1.868687] ata4: SATA max UDMA/133 abar m4096@0xfe071000 port 0xfe071280 irq 40
[ 1.872329] ata5: SATA max UDMA/133 abar m4096@0xfe071000 port 0xfe071300 irq 40
[ 1.876040] ata6: SATA max UDMA/133 abar m4096@0xfe071000 port 0xfe071380 irq 40
[ 2.140261] tsc: Refined TSC clocksource calibration: 1600.060 MHz
[ 2.196678] ata1: SATA link down (SStatus 0 SControl 300)
[ 2.200288] ata6: SATA link down (SStatus 0 SControl 300)
[ 2.203320] ata4: SATA link down (SStatus 0 SControl 300)
[ 2.206422] ata5: SATA link down (SStatus 0 SControl 300)
[ 2.209581] ata2: SATA link down (SStatus 0 SControl 300)
[ 2.212716] ata3: SATA link down (SStatus 0 SControl 300)
[ 2.244715] FS-Cache: Loaded
[ 2.253487] RPC: Registered named UNIX socket transport module.
[ 2.256813] RPC: Registered udp transport module.
[ 2.259173] RPC: Registered tcp transport module.
[ 2.261572] RPC: Registered tcp NFSv4.1 backchannel transport module.
[ 2.273383] FS-Cache: Netfs 'nfs' registered for caching
[ 2.295359] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 4.297059] e1000: eth0 NIC Link is Up 1000 Mbps Full Duplex, Flow Control: RX
[ 4.302208] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
[ 4.522354] systemd[1]: systemd 215 running in system mode. (+PAM +AUDIT +SELINUX +IMA +SYSVINIT +LIBCRYPTSETUP +GCRYPT +ACL +XZ -SECCOMP -APPARMOR)
[ 4.528289] systemd[1]: Detected virtualization 'kvm'.
[ 4.530479] systemd[1]: Detected architecture 'x86-64'.
[ 4.587001] systemd[1]: Inserted module 'autofs4'
[ 4.590859] systemd[1]: Set hostname to <cb-test-tgt>.
[ 4.979434] systemd[1]: Cannot add dependency job for unit dbus.socket, ignoring: Unit dbus.socket failed to load: No such file or directory.
[ 4.986747] systemd[1]: Cannot add dependency job for unit display-manager.service, ignoring: Unit display-manager.service failed to load: No such file or directory.
[ 4.995545] systemd[1]: Expecting device dev-ttyS0.device...
[ 5.001992] systemd[1]: Starting Forward Password Requests to Wall Directory Watch.
[ 5.005964] systemd[1]: Started Forward Password Requests to Wall Directory Watch.
[ 5.009852] systemd[1]: Starting Remote File Systems (Pre).
[ 5.017056] systemd[1]: Reached target Remote File Systems (Pre).
[ 5.020271] systemd[1]: Starting Encrypted Volumes.
[ 5.026674] systemd[1]: Reached target Encrypted Volumes.
[ 5.029568] systemd[1]: Starting Arbitrary Executable File Formats File System Automount Point.
[ 5.039376] systemd[1]: Set up automount Arbitrary Executable File Formats File System Automount Point.
[ 5.043120] systemd[1]: Starting Dispatch Password Requests to Console Directory Watch.
[ 5.046360] systemd[1]: Started Dispatch Password Requests to Console Directory Watch.
[ 5.049520] systemd[1]: Starting Paths.
[ 5.054389] systemd[1]: Reached target Paths.
[ 5.056283] systemd[1]: Starting Swap.
[ 5.061069] systemd[1]: Reached target Swap.
[ 5.062830] systemd[1]: Starting Root Slice.
[ 5.067919] systemd[1]: Created slice Root Slice.
[ 5.069860] systemd[1]: Starting Delayed Shutdown Socket.
[ 5.075661] systemd[1]: Listening on Delayed Shutdown Socket.
[ 5.078018] systemd[1]: Starting /dev/initctl Compatibility Named Pipe.
[ 5.085379] systemd[1]: Listening on /dev/initctl Compatibility Named Pipe.
[ 5.088137] systemd[1]: Starting Journal Socket (/dev/log).
[ 5.094680] systemd[1]: Listening on Journal Socket (/dev/log).
[ 5.097181] systemd[1]: Starting udev Kernel Socket.
[ 5.102792] systemd[1]: Listening on udev Kernel Socket.
[ 5.104954] systemd[1]: Starting udev Control Socket.
[ 5.110537] systemd[1]: Listening on udev Control Socket.
[ 5.112793] systemd[1]: Starting User and Session Slice.
[ 5.118541] systemd[1]: Created slice User and Session Slice.
[ 5.120829] systemd[1]: Starting Journal Socket.
[ 5.126147] systemd[1]: Listening on Journal Socket.
[ 5.128290] systemd[1]: Starting System Slice.
[ 5.133492] systemd[1]: Created slice System Slice.
[ 5.135457] systemd[1]: Starting Increase datagram queue length...
[ 5.141812] systemd[1]: Starting udev Coldplug all Devices...
[ 5.155397] systemd[1]: Starting Load Kernel Modules...
[ 5.207500] systemd[1]: Started Set Up Additional Binary Formats.
[ 5.234539] systemd[1]: Mounting Debug File System...
[ 5.251976] systemd[1]: Starting Create list of required static device nodes for the current kernel...
[ 5.279566] systemd[1]: Mounting POSIX Message Queue File System...
[ 5.301962] systemd[1]: Mounting Huge Pages File System...
[ 5.316903] systemd[1]: Starting system-getty.slice.
[ 5.335034] systemd[1]: Created slice system-getty.slice.
[ 5.339149] systemd[1]: Starting system-serial\x2dgetty.slice.
[ 5.348458] systemd[1]: Created slice system-serial\x2dgetty.slice.
[ 5.352341] systemd[1]: Starting Slices.
[ 5.360309] systemd[1]: Reached target Slices.
[ 5.362553] systemd[1]: Starting Remount Root and Kernel File Systems...
[ 5.375733] systemd[1]: Mounted Huge Pages File System.
[ 5.387662] systemd[1]: Mounted POSIX Message Queue File System.
[ 5.397972] systemd[1]: Mounted Debug File System.
[ 5.405213] systemd[1]: Started Increase datagram queue length.
[ 5.414228] systemd[1]: Started Load Kernel Modules.
[ 5.432134] systemd[1]: Started Create list of required static device nodes for the current kernel.
[ 5.448185] systemd[1]: Started Remount Root and Kernel File Systems.
[ 5.458819] systemd[1]: Started udev Coldplug all Devices.
[ 5.527991] systemd[1]: Started Various fixups to make systemd work better on Debian.
[ 5.531917] systemd[1]: Starting Load/Save Random Seed...
[ 5.539115] systemd[1]: Starting Create Static Device Nodes in /dev...
[ 5.553421] systemd[1]: Starting Apply Kernel Variables...
[ 5.576080] systemd[1]: Mounted Configuration File System.
[ 5.579039] systemd[1]: Mounted FUSE Control File System.
[ 5.583442] systemd[1]: Starting Syslog Socket.
[ 5.609966] systemd[1]: Listening on Syslog Socket.
[ 5.617622] systemd[1]: Starting Sockets.
[ 5.628140] systemd[1]: Reached target Sockets.
[ 5.631064] systemd[1]: Starting Journal Service...
[ 5.666876] systemd[1]: Started Journal Service.
[ 5.804447] systemd-udevd[146]: starting version 215
[ 6.215949] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input2
[ 6.220039] ACPI: Power Button [PWRF]
[ 6.266581] i801_smbus 0000:00:1f.3: enabling device (0100 -> 0101)
[ 6.281542] i801_smbus 0000:00:1f.3: Enabling SMBus device
[ 6.317134] i801_smbus 0000:00:1f.3: SMBus using PCI Interrupt
[ 6.327136] parport_pc 00:03: reported by Plug and Play ACPI
[ 6.330140] parport0: PC-style at 0x378, irq 7 [PCSPP,TRISTATE]
[ 6.414170] input: PC Speaker as /devices/platform/pcspkr/input/input3
[ 6.436205] [drm] Initialized drm 1.1.0 20060810
[ 6.500815] iTCO_vendor_support: vendor-support=0
[ 6.505284] ppdev: user-space parallel port driver
[ 6.526021] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.11
[ 6.532420] iTCO_wdt: Found a ICH9 TCO device (Version=2, TCOBASE=0x0660)
[ 6.535461] iTCO_wdt: timeout value out of range, using 30
[ 6.546738] iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0)
[ 6.949313] Key type dns_resolver registered
[ 6.989562] NFS: Registering the id_resolver key type
[ 6.993554] Key type id_resolver registered
[ 6.996465] Key type id_legacy registered
[ 7.297253] input: ImExPS/2 Generic Explorer Mouse as /devices/platform/i8042/serio1/input/input4
[ 7.321028] systemd-journald[144]: Received request to flush runtime journal from PID 1
[ 7.356808] Installing knfsd (copyright (C) 1996 okir@monad.swb.de).
[ 7.378656] random: nonblocking pool is initialized
[ 37.702393] *****RAPTOR ENGINEERING AUTOMATED TEST BOOT SUCCESS*****