| [ 0.000000] Linux version 4.9.0-6-amd64 (debian-kernel@lists.debian.org) (gcc version 6.3.0 20170516 (Debian 6.3.0-18+deb9u1) ) #1 SMP Debian 4.9.88-1+deb9u1 (2018-05-07) |
| [ 0.000000] Command line: BOOT_IMAGE=/boot/vmlinuz-4.9.0-6-amd64 root=UUID=5b850e2a-4044-425b-99c3-5beab6d79d3b ro |
| [ 0.000000] x86/fpu: Supporting XSAVE feature 0x001: 'x87 floating point registers' |
| [ 0.000000] x86/fpu: Supporting XSAVE feature 0x002: 'SSE registers' |
| [ 0.000000] x86/fpu: Supporting XSAVE feature 0x004: 'AVX registers' |
| [ 0.000000] x86/fpu: xstate_offset[2]: 576, xstate_sizes[2]: 256 |
| [ 0.000000] x86/fpu: Enabled xstate features 0x7, context size is 832 bytes, using 'standard' format. |
| [ 0.000000] x86/fpu: Using 'eager' FPU context switches. |
| [ 0.000000] e820: BIOS-provided physical RAM map: |
| [ 0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009fbff] usable |
| [ 0.000000] BIOS-e820: [mem 0x000000000009fc00-0x000000000009ffff] reserved |
| [ 0.000000] BIOS-e820: [mem 0x00000000000f0000-0x00000000000fffff] reserved |
| [ 0.000000] BIOS-e820: [mem 0x0000000000100000-0x000000007fd54fff] usable |
| [ 0.000000] BIOS-e820: [mem 0x000000007fd55000-0x00000000829fffff] reserved |
| [ 0.000000] BIOS-e820: [mem 0x00000000f0000000-0x00000000f3ffffff] reserved |
| [ 0.000000] BIOS-e820: [mem 0x00000000fed90000-0x00000000fed91fff] reserved |
| [ 0.000000] BIOS-e820: [mem 0x0000000100000000-0x000000047b5fffff] usable |
| [ 0.000000] NX (Execute Disable) protection: active |
| [ 0.000000] SMBIOS 2.7 present. |
| [ 0.000000] DMI: HP EliteBook 8770w/EliteBook 8770w, BIOS 4.8-167-g659f40bb34 05/24/2018 |
| [ 0.000000] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved |
| [ 0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable |
| [ 0.000000] e820: last_pfn = 0x47b600 max_arch_pfn = 0x400000000 |
| [ 0.000000] MTRR default type: uncachable |
| [ 0.000000] MTRR fixed ranges enabled: |
| [ 0.000000] 00000-9FFFF write-back |
| [ 0.000000] A0000-BFFFF uncachable |
| [ 0.000000] C0000-FFFFF write-back |
| [ 0.000000] MTRR variable ranges enabled: |
| [ 0.000000] 0 base 000000000 mask F80000000 write-back |
| [ 0.000000] 1 base 0D0000000 mask FF0000000 write-combining |
| [ 0.000000] 2 base 0E0000000 mask FFE000000 write-combining |
| [ 0.000000] 3 base 100000000 mask F00000000 write-back |
| [ 0.000000] 4 base 200000000 mask E00000000 write-back |
| [ 0.000000] 5 base 400000000 mask F80000000 write-back |
| [ 0.000000] 6 disabled |
| [ 0.000000] 7 disabled |
| [ 0.000000] 8 disabled |
| [ 0.000000] 9 disabled |
| [ 0.000000] x86/PAT: Configuration [0-7]: WB WC UC- UC WB WC UC- WT |
| [ 0.000000] e820: last_pfn = 0x7fd55 max_arch_pfn = 0x400000000 |
| [ 0.000000] Base memory trampoline at [ffff961b80099000] 99000 size 24576 |
| [ 0.000000] BRK [0x160d39000, 0x160d39fff] PGTABLE |
| [ 0.000000] BRK [0x160d3a000, 0x160d3afff] PGTABLE |
| [ 0.000000] BRK [0x160d3b000, 0x160d3bfff] PGTABLE |
| [ 0.000000] BRK [0x160d3c000, 0x160d3cfff] PGTABLE |
| [ 0.000000] BRK [0x160d3d000, 0x160d3dfff] PGTABLE |
| [ 0.000000] BRK [0x160d3e000, 0x160d3efff] PGTABLE |
| [ 0.000000] BRK [0x160d3f000, 0x160d3ffff] PGTABLE |
| [ 0.000000] RAMDISK: [mem 0x35cd3000-0x36e60fff] |
| [ 0.000000] ACPI: Early table checksum verification disabled |
| [ 0.000000] ACPI: RSDP 0x00000000000F6790 000024 (v02 CORE ) |
| [ 0.000000] ACPI: XSDT 0x000000007FD7B0E0 00005C (v01 CORE COREBOOT 00000000 CORE 00000000) |
| [ 0.000000] ACPI: FACP 0x000000007FD7E6D0 0000F4 (v04 CORE COREBOOT 00000000 CORE 00000000) |
| [ 0.000000] ACPI: DSDT 0x000000007FD7B280 003447 (v03 COREv4 COREBOOT 20141018 INTL 20161222) |
| [ 0.000000] ACPI: FACS 0x000000007FD7B240 000040 |
| [ 0.000000] ACPI: FACS 0x000000007FD7B240 000040 |
| [ 0.000000] ACPI: SSDT 0x000000007FD7E7D0 002DD3 (v02 CORE COREBOOT 0000002A CORE 0000002A) |
| [ 0.000000] ACPI: MCFG 0x000000007FD815B0 00003C (v01 CORE COREBOOT 00000000 CORE 00000000) |
| [ 0.000000] ACPI: TCPA 0x000000007FD815F0 000032 (v02 CORE COREBOOT 00000000 CORE 00000000) |
| [ 0.000000] ACPI: APIC 0x000000007FD81630 00008C (v01 CORE COREBOOT 00000000 CORE 00000000) |
| [ 0.000000] ACPI: DMAR 0x000000007FD816C0 000088 (v01 CORE COREBOOT 00000000 CORE 00000000) |
| [ 0.000000] ACPI: HPET 0x000000007FD81750 000038 (v01 CORE COREBOOT 00000000 CORE 00000000) |
| [ 0.000000] ACPI: Local APIC address 0xfee00000 |
| [ 0.000000] No NUMA configuration found |
| [ 0.000000] Faking a node at [mem 0x0000000000000000-0x000000047b5fffff] |
| [ 0.000000] NODE_DATA(0) allocated [mem 0x47b5ee000-0x47b5f2fff] |
| [ 0.000000] Zone ranges: |
| [ 0.000000] DMA [mem 0x0000000000001000-0x0000000000ffffff] |
| [ 0.000000] DMA32 [mem 0x0000000001000000-0x00000000ffffffff] |
| [ 0.000000] Normal [mem 0x0000000100000000-0x000000047b5fffff] |
| [ 0.000000] Device empty |
| [ 0.000000] Movable zone start for each node |
| [ 0.000000] Early memory node ranges |
| [ 0.000000] node 0: [mem 0x0000000000001000-0x000000000009efff] |
| [ 0.000000] node 0: [mem 0x0000000000100000-0x000000007fd54fff] |
| [ 0.000000] node 0: [mem 0x0000000100000000-0x000000047b5fffff] |
| [ 0.000000] Initmem setup node 0 [mem 0x0000000000001000-0x000000047b5fffff] |
| [ 0.000000] On node 0 totalpages: 4174579 |
| [ 0.000000] DMA zone: 64 pages used for memmap |
| [ 0.000000] DMA zone: 21 pages reserved |
| [ 0.000000] DMA zone: 3998 pages, LIFO batch:0 |
| [ 0.000000] DMA32 zone: 8118 pages used for memmap |
| [ 0.000000] DMA32 zone: 519509 pages, LIFO batch:31 |
| [ 0.000000] Normal zone: 57048 pages used for memmap |
| [ 0.000000] Normal zone: 3651072 pages, LIFO batch:31 |
| [ 0.000000] ACPI: PM-Timer IO Port: 0x508 |
| [ 0.000000] ACPI: Local APIC address 0xfee00000 |
| [ 0.000000] IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-23 |
| [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) |
| [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level) |
| [ 0.000000] ACPI: IRQ0 used by override. |
| [ 0.000000] ACPI: IRQ9 used by override. |
| [ 0.000000] Using ACPI (MADT) for SMP configuration information |
| [ 0.000000] ACPI: HPET id: 0x8086a701 base: 0xfed00000 |
| [ 0.000000] smpboot: Allowing 8 CPUs, 0 hotplug CPUs |
| [ 0.000000] PM: Registered nosave memory: [mem 0x00000000-0x00000fff] |
| [ 0.000000] PM: Registered nosave memory: [mem 0x0009f000-0x0009ffff] |
| [ 0.000000] PM: Registered nosave memory: [mem 0x000a0000-0x000effff] |
| [ 0.000000] PM: Registered nosave memory: [mem 0x000f0000-0x000fffff] |
| [ 0.000000] PM: Registered nosave memory: [mem 0x7fd55000-0x829fffff] |
| [ 0.000000] PM: Registered nosave memory: [mem 0x82a00000-0xefffffff] |
| [ 0.000000] PM: Registered nosave memory: [mem 0xf0000000-0xf3ffffff] |
| [ 0.000000] PM: Registered nosave memory: [mem 0xf4000000-0xfed8ffff] |
| [ 0.000000] PM: Registered nosave memory: [mem 0xfed90000-0xfed91fff] |
| [ 0.000000] PM: Registered nosave memory: [mem 0xfed92000-0xffffffff] |
| [ 0.000000] e820: [mem 0x82a00000-0xefffffff] available for PCI devices |
| [ 0.000000] Booting paravirtualized kernel on bare hardware |
| [ 0.000000] clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645519600211568 ns |
| [ 0.000000] setup_percpu: NR_CPUS:512 nr_cpumask_bits:512 nr_cpu_ids:8 nr_node_ids:1 |
| [ 0.000000] percpu: Embedded 35 pages/cpu @ffff961ffb200000 s105304 r8192 d29864 u262144 |
| [ 0.000000] pcpu-alloc: s105304 r8192 d29864 u262144 alloc=1*2097152 |
| [ 0.000000] pcpu-alloc: [0] 0 1 2 3 4 5 6 7 |
| [ 0.000000] Built 1 zonelists in Node order, mobility grouping on. Total pages: 4109328 |
| [ 0.000000] Policy zone: Normal |
| [ 0.000000] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-4.9.0-6-amd64 root=UUID=5b850e2a-4044-425b-99c3-5beab6d79d3b ro |
| [ 0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes) |
| [ 0.000000] Calgary: detecting Calgary via BIOS EBDA area |
| [ 0.000000] Calgary: Unable to locate Rio Grande table in EBDA - bailing! |
| [ 0.000000] Memory: 16335268K/16698316K available (6240K kernel code, 1159K rwdata, 2868K rodata, 1416K init, 688K bss, 363048K reserved, 0K cma-reserved) |
| [ 0.000000] Kernel/User page tables isolation: enabled |
| [ 0.000000] Hierarchical RCU implementation. |
| [ 0.000000] Build-time adjustment of leaf fanout to 64. |
| [ 0.000000] RCU restricting CPUs from NR_CPUS=512 to nr_cpu_ids=8. |
| [ 0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=64, nr_cpu_ids=8 |
| [ 0.000000] NR_IRQS:33024 nr_irqs:488 16 |
| [ 0.000000] Console: colour dummy device 80x25 |
| [ 0.000000] console [tty0] enabled |
| [ 0.000000] clocksource: hpet: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 133484882848 ns |
| [ 0.000000] hpet clockevent registered |
| [ 0.000000] tsc: Fast TSC calibration using PIT |
| [ 0.000000] tsc: Detected 2593.980 MHz processor |
| [ 0.000027] Calibrating delay loop (skipped), value calculated using timer frequency.. 5187.96 BogoMIPS (lpj=10375920) |
| [ 0.000034] pid_max: default: 32768 minimum: 301 |
| [ 0.000052] ACPI: Core revision 20160831 |
| [ 0.002625] ACPI: 2 ACPI AML tables successfully acquired and loaded |
| [ 0.002673] Security Framework initialized |
| [ 0.002677] Yama: disabled by default; enable with sysctl kernel.yama.* |
| [ 0.002685] AppArmor: AppArmor disabled by boot time parameter |
| [ 0.003417] Dentry cache hash table entries: 2097152 (order: 12, 16777216 bytes) |
| [ 0.007083] Inode-cache hash table entries: 1048576 (order: 11, 8388608 bytes) |
| [ 0.008750] Mount-cache hash table entries: 32768 (order: 6, 262144 bytes) |
| [ 0.008767] Mountpoint-cache hash table entries: 32768 (order: 6, 262144 bytes) |
| [ 0.009064] CPU: Physical Processor ID: 0 |
| [ 0.009068] CPU: Processor Core ID: 0 |
| [ 0.009077] mce: CPU supports 9 MCE banks |
| [ 0.009089] mce: [Hardware Error]: Machine check events logged |
| [ 0.009097] CPU0: Thermal monitoring enabled (TM1) |
| [ 0.009111] process: using mwait in idle threads |
| [ 0.009117] Last level iTLB entries: 4KB 512, 2MB 8, 4MB 8 |
| [ 0.009120] Last level dTLB entries: 4KB 512, 2MB 32, 4MB 32, 1GB 0 |
| [ 0.009124] Spectre V2 : Mitigation: Full generic retpoline |
| [ 0.009127] Spectre V2 : Spectre v2 mitigation: Enabling Indirect Branch Prediction Barrier |
| [ 0.009132] Spectre V2 : Enabling Restricted Speculation for firmware calls |
| [ 0.009624] Freeing SMP alternatives memory: 24K |
| [ 0.105831] ftrace: allocating 25239 entries in 99 pages |
| [ 0.127833] smpboot: Max logical packages: 2 |
| [ 0.127841] DMAR: Host address width 36 |
| [ 0.127844] DMAR: DRHD base: 0x000000fed91000 flags: 0x1 |
| [ 0.127855] DMAR: dmar0: reg_base_addr fed91000 ver 1:0 cap c9008020660262 ecap f0105a |
| [ 0.127861] DMAR-IR: IOAPIC id 2 under DRHD base 0xfed91000 IOMMU 0 |
| [ 0.127865] DMAR-IR: HPET id 0 under DRHD base 0xfed91000 |
| [ 0.127868] DMAR-IR: Queued invalidation will be enabled to support x2apic and Intr-remapping. |
| [ 0.128037] DMAR-IR: Enabled IRQ remapping in x2apic mode |
| [ 0.128041] x2apic enabled |
| [ 0.128048] Switched APIC routing to cluster x2apic. |
| [ 0.128503] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1 |
| [ 0.168195] TSC deadline timer enabled |
| [ 0.168198] smpboot: CPU0: Intel(R) Core(TM) i7-3720QM CPU @ 2.60GHz (family: 0x6, model: 0x3a, stepping: 0x9) |
| [ 0.168207] Performance Events: PEBS fmt1+, IvyBridge events, 16-deep LBR, full-width counters, Intel PMU driver. |
| [ 0.168236] ... version: 3 |
| [ 0.168239] ... bit width: 48 |
| [ 0.168242] ... generic registers: 4 |
| [ 0.168245] ... value mask: 0000ffffffffffff |
| [ 0.168249] ... max period: 00007fffffffffff |
| [ 0.168252] ... fixed-purpose events: 3 |
| [ 0.168255] ... event mask: 000000070000000f |
| [ 0.168840] NMI watchdog: enabled on all CPUs, permanently consumes one hw-PMU counter. |
| [ 0.168950] x86: Booting SMP configuration: |
| [ 0.168954] .... node #0, CPUs: #1 #2 #3 #4 #5 #6 #7 |
| [ 0.186264] x86: Booted up 1 node, 8 CPUs |
| [ 0.186273] smpboot: Total of 8 processors activated (41503.68 BogoMIPS) |
| [ 0.193087] devtmpfs: initialized |
| [ 0.193157] x86/mm: Memory block size: 128MB |
| [ 0.196539] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns |
| [ 0.196557] futex hash table entries: 2048 (order: 5, 131072 bytes) |
| [ 0.196617] pinctrl core: initialized pinctrl subsystem |
| [ 0.196731] NET: Registered protocol family 16 |
| [ 0.212617] cpuidle: using governor ladder |
| [ 0.228626] cpuidle: using governor menu |
| [ 0.228678] ACPI: bus type PCI registered |
| [ 0.228682] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5 |
| [ 0.228752] PCI: MMCONFIG for domain 0000 [bus 00-3f] at [mem 0xf0000000-0xf3ffffff] (base 0xf0000000) |
| [ 0.228759] PCI: MMCONFIG at [mem 0xf0000000-0xf3ffffff] reserved in E820 |
| [ 0.228770] PCI: Using configuration type 1 for base access |
| [ 0.228823] core: PMU erratum BJ122, BV98, HSD29 worked around, HT is on |
| [ 0.244777] HugeTLB registered 2 MB page size, pre-allocated 0 pages |
| [ 0.245015] ACPI: Added _OSI(Module Device) |
| [ 0.245021] ACPI: Added _OSI(Processor Device) |
| [ 0.245024] ACPI: Added _OSI(3.0 _SCP Extensions) |
| [ 0.245028] ACPI: Added _OSI(Processor Aggregator Device) |
| [ 0.245163] ACPI: Executed 1 blocks of module-level executable AML code |
| [ 0.247430] ACPI Error: No handler for Region [ECRM] (ffff961fea9b9360) [EmbeddedControl] (20160831/evregion-166) |
| [ 0.247439] ACPI Error: Region EmbeddedControl (ID=3) has no handler (20160831/exfldio-299) |
| [ 0.247447] ACPI Error: Method parse/execution failed [\_SB.PCI0.LPCB.EC0._REG] (Node ffff961fea9ba5c8), AE_NOT_EXIST (20160831/psparse-543) |
| [ 0.247999] ACPI : EC: EC started |
| [ 0.248003] ACPI : EC: interrupt blocked |
| [ 0.259761] ACPI: \_SB_.PCI0.LPCB.EC0_: Used as first EC |
| [ 0.259766] ACPI: \_SB_.PCI0.LPCB.EC0_: GPE=0x16, EC_CMD/EC_SC=0x66, EC_DATA=0x62 |
| [ 0.259772] ACPI: \_SB_.PCI0.LPCB.EC0_: Used as boot DSDT EC to handle transactions |
| [ 0.259777] ACPI: Interpreter enabled |
| [ 0.259795] ACPI: (supports S0 S3 S4 S5) |
| [ 0.259798] ACPI: Using IOAPIC for interrupt routing |
| [ 0.259819] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug |
| [ 0.263113] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff]) |
| [ 0.263121] acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI] |
| [ 0.263173] acpi PNP0A08:00: _OSC: OS now controls [PCIeHotplug PME AER PCIeCapability] |
| [ 0.263187] acpi PNP0A08:00: [Firmware Info]: MMCONFIG for domain 0000 [bus 00-3f] only partially covers this bridge |
| [ 0.263246] acpi PNP0A08:00: ignoring host bridge window [mem 0x000cc000-0x000cffff window] (conflicts with Video ROM [mem 0x000c0000-0x000cf1ff]) |
| [ 0.263414] PCI host bridge to bus 0000:00 |
| [ 0.263419] pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7 window] |
| [ 0.263423] pci_bus 0000:00: root bus resource [io 0x0d00-0xffff window] |
| [ 0.263428] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff window] |
| [ 0.263433] pci_bus 0000:00: root bus resource [mem 0x000c0000-0x000c3fff window] |
| [ 0.263439] pci_bus 0000:00: root bus resource [mem 0x000c4000-0x000c7fff window] |
| [ 0.263445] pci_bus 0000:00: root bus resource [mem 0x000c8000-0x000cbfff window] |
| [ 0.263451] pci_bus 0000:00: root bus resource [mem 0x000d0000-0x000d3fff window] |
| [ 0.263457] pci_bus 0000:00: root bus resource [mem 0x000d4000-0x000d7fff window] |
| [ 0.263462] pci_bus 0000:00: root bus resource [mem 0x000d8000-0x000dbfff window] |
| [ 0.263468] pci_bus 0000:00: root bus resource [mem 0x000dc000-0x000dffff window] |
| [ 0.263474] pci_bus 0000:00: root bus resource [mem 0x000e0000-0x000e3fff window] |
| [ 0.263480] pci_bus 0000:00: root bus resource [mem 0x000e4000-0x000e7fff window] |
| [ 0.263485] pci_bus 0000:00: root bus resource [mem 0x000e8000-0x000ebfff window] |
| [ 0.263491] pci_bus 0000:00: root bus resource [mem 0x000ec000-0x000effff window] |
| [ 0.263497] pci_bus 0000:00: root bus resource [mem 0x000f0000-0x000fffff window] |
| [ 0.263503] pci_bus 0000:00: root bus resource [mem 0x82a00001-0xefffffff window] |
| [ 0.263509] pci_bus 0000:00: root bus resource [mem 0xfed40000-0xfed44fff window] |
| [ 0.263515] pci_bus 0000:00: root bus resource [bus 00-ff] |
| [ 0.263525] pci 0000:00:00.0: [8086:0154] type 00 class 0x060000 |
| [ 0.263617] pci 0000:00:01.0: [8086:0151] type 01 class 0x060400 |
| [ 0.263648] pci 0000:00:01.0: PME# supported from D0 D3hot D3cold |
| [ 0.263725] pci 0000:00:04.0: [8086:0153] type 00 class 0x118000 |
| [ 0.263734] pci 0000:00:04.0: reg 0x10: [mem 0xe5a30000-0xe5a37fff 64bit] |
| [ 0.263835] pci 0000:00:14.0: [8086:1e31] type 00 class 0x0c0330 |
| [ 0.263856] pci 0000:00:14.0: reg 0x10: [mem 0xe5a20000-0xe5a2ffff 64bit] |
| [ 0.263924] pci 0000:00:14.0: PME# supported from D3hot D3cold |
| [ 0.263963] pci 0000:00:14.0: System wakeup disabled by ACPI |
| [ 0.264035] pci 0000:00:16.0: [8086:1e3a] type 00 class 0x078000 |
| [ 0.264114] pci 0000:00:16.0: reg 0x10: [mem 0xe5a40000-0xe5a4000f 64bit] |
| [ 0.264448] pci 0000:00:16.0: PME# supported from D0 D3hot D3cold |
| [ 0.264549] pci 0000:00:19.0: [8086:1502] type 00 class 0x020000 |
| [ 0.264565] pci 0000:00:19.0: reg 0x10: [mem 0xe5a00000-0xe5a1ffff] |
| [ 0.264573] pci 0000:00:19.0: reg 0x14: [mem 0xe5a3c000-0xe5a3cfff] |
| [ 0.264582] pci 0000:00:19.0: reg 0x18: [io 0x5000-0x501f] |
| [ 0.264647] pci 0000:00:19.0: PME# supported from D0 D3hot D3cold |
| [ 0.264721] pci 0000:00:1a.0: [8086:1e2d] type 00 class 0x0c0320 |
| [ 0.264739] pci 0000:00:1a.0: reg 0x10: [mem 0xe5a3e000-0xe5a3e3ff] |
| [ 0.264823] pci 0000:00:1a.0: PME# supported from D0 D3hot D3cold |
| [ 0.264863] pci 0000:00:1a.0: System wakeup disabled by ACPI |
| [ 0.264908] pci 0000:00:1b.0: [8086:1e20] type 00 class 0x040300 |
| [ 0.264925] pci 0000:00:1b.0: reg 0x10: [mem 0xe5a38000-0xe5a3bfff 64bit] |
| [ 0.264997] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold |
| [ 0.265040] pci 0000:00:1b.0: System wakeup disabled by ACPI |
| [ 0.265083] pci 0000:00:1c.0: [8086:1e10] type 01 class 0x060400 |
| [ 0.265152] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold |
| [ 0.265232] pci 0000:00:1c.1: [8086:1e12] type 01 class 0x060400 |
| [ 0.265308] pci 0000:00:1c.1: PME# supported from D0 D3hot D3cold |
| [ 0.265387] pci 0000:00:1c.2: [8086:1e14] type 01 class 0x060400 |
| [ 0.265463] pci 0000:00:1c.2: PME# supported from D0 D3hot D3cold |
| [ 0.265541] pci 0000:00:1c.3: [8086:1e16] type 01 class 0x060400 |
| [ 0.265615] pci 0000:00:1c.3: PME# supported from D0 D3hot D3cold |
| [ 0.265695] pci 0000:00:1c.4: [8086:1e18] type 01 class 0x060400 |
| [ 0.265769] pci 0000:00:1c.4: PME# supported from D0 D3hot D3cold |
| [ 0.265851] pci 0000:00:1d.0: [8086:1e26] type 00 class 0x0c0320 |
| [ 0.265869] pci 0000:00:1d.0: reg 0x10: [mem 0xe5a3f000-0xe5a3f3ff] |
| [ 0.265953] pci 0000:00:1d.0: PME# supported from D0 D3hot D3cold |
| [ 0.265992] pci 0000:00:1d.0: System wakeup disabled by ACPI |
| [ 0.266034] pci 0000:00:1f.0: [8086:1e55] type 00 class 0x060100 |
| [ 0.266203] pci 0000:00:1f.2: [8086:1e03] type 00 class 0x010601 |
| [ 0.266220] pci 0000:00:1f.2: reg 0x10: [io 0x5040-0x5047] |
| [ 0.266228] pci 0000:00:1f.2: reg 0x14: [io 0x5050-0x5053] |
| [ 0.266237] pci 0000:00:1f.2: reg 0x18: [io 0x5048-0x504f] |
| [ 0.266245] pci 0000:00:1f.2: reg 0x1c: [io 0x5054-0x5057] |
| [ 0.266254] pci 0000:00:1f.2: reg 0x20: [io 0x5020-0x503f] |
| [ 0.266262] pci 0000:00:1f.2: reg 0x24: [mem 0xe5a3d000-0xe5a3d7ff] |
| [ 0.266307] pci 0000:00:1f.2: PME# supported from D3hot |
| [ 0.266420] pci 0000:01:00.0: [10de:13d7] type 00 class 0x030000 |
| [ 0.266431] pci 0000:01:00.0: reg 0x10: [mem 0xe2000000-0xe2ffffff] |
| [ 0.266441] pci 0000:01:00.0: reg 0x14: [mem 0xd0000000-0xdfffffff 64bit pref] |
| [ 0.266451] pci 0000:01:00.0: reg 0x1c: [mem 0xe0000000-0xe1ffffff 64bit pref] |
| [ 0.266458] pci 0000:01:00.0: reg 0x24: [io 0x1000-0x107f] |
| [ 0.266465] pci 0000:01:00.0: reg 0x30: [mem 0xe3000000-0xe307ffff pref] |
| [ 0.266562] pci 0000:01:00.1: [10de:0fbb] type 00 class 0x040300 |
| [ 0.266573] pci 0000:01:00.1: reg 0x10: [mem 0xe3080000-0xe3083fff] |
| [ 0.280676] pci 0000:00:01.0: PCI bridge to [bus 01] |
| [ 0.280687] pci 0000:00:01.0: bridge window [io 0x1000-0x1fff] |
| [ 0.280699] pci 0000:00:01.0: bridge window [mem 0xe2000000-0xe30fffff] |
| [ 0.280702] pci 0000:00:01.0: bridge window [mem 0xd0000000-0xe1ffffff 64bit pref] |
| [ 0.280749] pci 0000:00:1c.0: PCI bridge to [bus 02] |
| [ 0.280824] pci 0000:00:1c.1: PCI bridge to [bus 03] |
| [ 0.280831] pci 0000:00:1c.1: bridge window [io 0x2000-0x2fff] |
| [ 0.280835] pci 0000:00:1c.1: bridge window [mem 0xe4800000-0xe4ffffff] |
| [ 0.280841] pci 0000:00:1c.1: bridge window [mem 0xe4000000-0xe47fffff 64bit pref] |
| [ 0.280930] pci 0000:04:00.0: [197b:2380] type 00 class 0x0c0010 |
| [ 0.280967] pci 0000:04:00.0: reg 0x10: [mem 0xe3c10000-0xe3c107ff] |
| [ 0.280990] pci 0000:04:00.0: reg 0x14: [mem 0xe3c11000-0xe3c110ff] |
| [ 0.281286] pci 0000:04:00.1: [197b:2392] type 00 class 0x088000 |
| [ 0.281318] pci 0000:04:00.1: reg 0x10: [mem 0xe3c12000-0xe3c120ff] |
| [ 0.281431] pci 0000:04:00.1: reg 0x30: [mem 0xe3c00000-0xe3c0ffff pref] |
| [ 0.281601] pci 0000:04:00.2: [197b:2391] type 00 class 0x080501 |
| [ 0.281633] pci 0000:04:00.2: reg 0x10: [mem 0xe3c13000-0xe3c130ff] |
| [ 0.281917] pci 0000:04:00.3: [197b:2393] type 00 class 0x088000 |
| [ 0.281949] pci 0000:04:00.3: reg 0x10: [mem 0xe3c14000-0xe3c140ff] |
| [ 0.282233] pci 0000:04:00.4: [197b:2394] type 00 class 0x088000 |
| [ 0.282265] pci 0000:04:00.4: reg 0x10: [mem 0xe3c15000-0xe3c150ff] |
| [ 0.296699] pci 0000:00:1c.2: PCI bridge to [bus 04] |
| [ 0.296716] pci 0000:00:1c.2: bridge window [io 0x3000-0x3fff] |
| [ 0.296720] pci 0000:00:1c.2: bridge window [mem 0xe3400000-0xe3cfffff] |
| [ 0.296726] pci 0000:00:1c.2: bridge window [mem 0xe5000000-0xe57fffff 64bit pref] |
| [ 0.296801] pci 0000:05:00.0: [168c:0034] type 00 class 0x028000 |
| [ 0.296843] pci 0000:05:00.0: reg 0x10: [mem 0xe5800000-0xe587ffff 64bit] |
| [ 0.296927] pci 0000:05:00.0: reg 0x30: [mem 0xe5880000-0xe588ffff pref] |
| [ 0.297039] pci 0000:05:00.0: supports D1 D2 |
| [ 0.297041] pci 0000:05:00.0: PME# supported from D0 D1 D2 D3hot D3cold |
| [ 0.312704] pci 0000:00:1c.3: PCI bridge to [bus 05] |
| [ 0.312725] pci 0000:00:1c.3: bridge window [mem 0xe5800000-0xe58fffff] |
| [ 0.312798] pci 0000:06:00.0: [197b:2360] type 00 class 0x010601 |
| [ 0.312847] pci 0000:06:00.0: reg 0x10: [io 0x4010-0x4017] |
| [ 0.312866] pci 0000:06:00.0: reg 0x14: [io 0x4020-0x4023] |
| [ 0.312885] pci 0000:06:00.0: reg 0x18: [io 0x4018-0x401f] |
| [ 0.312904] pci 0000:06:00.0: reg 0x1c: [io 0x4024-0x4027] |
| [ 0.312923] pci 0000:06:00.0: reg 0x20: [io 0x4000-0x400f] |
| [ 0.312942] pci 0000:06:00.0: reg 0x24: [mem 0xe5910000-0xe59101ff] |
| [ 0.312961] pci 0000:06:00.0: reg 0x30: [mem 0xe5900000-0xe590ffff pref] |
| [ 0.313062] pci 0000:06:00.0: PME# supported from D3hot |
| [ 0.324706] pci 0000:00:1c.4: PCI bridge to [bus 06] |
| [ 0.324729] pci 0000:00:1c.4: bridge window [io 0x4000-0x4fff] |
| [ 0.324733] pci 0000:00:1c.4: bridge window [mem 0xe5900000-0xe59fffff] |
| [ 0.324898] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 10 *11 12 14 15) |
| [ 0.324950] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 10 *11 12 14 15) |
| [ 0.324998] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 7 10 *11 12 14 15) |
| [ 0.325046] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 10 *11 12 14 15) |
| [ 0.325093] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 10 *11 12 14 15) |
| [ 0.325140] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 10 *11 12 14 15) |
| [ 0.325186] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 7 10 *11 12 14 15) |
| [ 0.325233] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 7 10 *11 12 14 15) |
| [ 0.325622] ACPI: Enabled 1 GPEs in block 00 to 3F |
| [ 0.325736] ACPI : EC: interrupt unblocked |
| [ 0.325744] ACPI : EC: event unblocked |
| [ 0.325754] ACPI: \_SB_.PCI0.LPCB.EC0_: GPE=0x16, EC_CMD/EC_SC=0x66, EC_DATA=0x62 |
| [ 0.325760] ACPI: \_SB_.PCI0.LPCB.EC0_: Used as boot DSDT EC to handle transactions and events |
| [ 0.325833] vgaarb: setting as boot device: PCI:0000:01:00.0 |
| [ 0.325837] vgaarb: device added: PCI:0000:01:00.0,decodes=io+mem,owns=io+mem,locks=none |
| [ 0.325843] vgaarb: loaded |
| [ 0.325847] vgaarb: bridge control possible 0000:01:00.0 |
| [ 0.325907] PCI: Using ACPI for IRQ routing |
| [ 0.327380] PCI: pci_cache_line_size set to 64 bytes |
| [ 0.327478] e820: reserve RAM buffer [mem 0x0009fc00-0x0009ffff] |
| [ 0.327479] e820: reserve RAM buffer [mem 0x7fd55000-0x7fffffff] |
| [ 0.327480] e820: reserve RAM buffer [mem 0x47b600000-0x47bffffff] |
| [ 0.327610] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0, 0, 0, 0, 0 |
| [ 0.327619] hpet0: 8 comparators, 64-bit 14.318180 MHz counter |
| [ 0.329646] clocksource: Switched to clocksource hpet |
| [ 0.335493] VFS: Disk quotas dquot_6.6.0 |
| [ 0.335522] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes) |
| [ 0.335601] pnp: PnP ACPI init |
| [ 0.335735] system 00:00: [mem 0xfed1c000-0xfed1ffff] has been reserved |
| [ 0.335741] system 00:00: [mem 0xfed10000-0xfed17fff] has been reserved |
| [ 0.335745] system 00:00: [mem 0xfed18000-0xfed18fff] has been reserved |
| [ 0.335749] system 00:00: [mem 0xfed19000-0xfed19fff] has been reserved |
| [ 0.335754] system 00:00: [mem 0xf0000000-0xf3ffffff] has been reserved |
| [ 0.335758] system 00:00: [mem 0xfed20000-0xfed3ffff] has been reserved |
| [ 0.335762] system 00:00: [mem 0xfed40000-0xfed44fff] has been reserved |
| [ 0.335767] system 00:00: [mem 0xfed45000-0xfed8ffff] has been reserved |
| [ 0.335771] system 00:00: [mem 0x20000000-0x201fffff] could not be reserved |
| [ 0.335775] system 00:00: [mem 0x40000000-0x401fffff] could not be reserved |
| [ 0.335781] system 00:00: Plug and Play ACPI device, IDs PNP0c02 (active) |
| [ 0.336078] system 00:01: [mem 0xfed00000-0xfed003ff] has been reserved |
| [ 0.336083] system 00:01: Plug and Play ACPI device, IDs PNP0103 PNP0c01 (active) |
| [ 0.336125] system 00:02: [io 0x0500-0x057f] has been reserved |
| [ 0.336130] system 00:02: [io 0x0480-0x04bf] has been reserved |
| [ 0.336134] system 00:02: Plug and Play ACPI device, IDs PNP0c02 (active) |
| [ 0.336155] pnp 00:03: Plug and Play ACPI device, IDs PNP0b00 (active) |
| [ 0.336186] pnp 00:04: Plug and Play ACPI device, IDs PNP0303 PNP030b (active) |
| [ 0.336211] pnp 00:05: Plug and Play ACPI device, IDs PNP0f13 (active) |
| [ 0.336228] pnp: PnP ACPI: found 6 devices |
| [ 0.342487] clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns |
| [ 0.342539] pci 0000:00:01.0: PCI bridge to [bus 01] |
| [ 0.342544] pci 0000:00:01.0: bridge window [io 0x1000-0x1fff] |
| [ 0.342550] pci 0000:00:01.0: bridge window [mem 0xe2000000-0xe30fffff] |
| [ 0.342555] pci 0000:00:01.0: bridge window [mem 0xd0000000-0xe1ffffff 64bit pref] |
| [ 0.342563] pci 0000:00:1c.0: PCI bridge to [bus 02] |
| [ 0.342577] pci 0000:00:1c.1: PCI bridge to [bus 03] |
| [ 0.342582] pci 0000:00:1c.1: bridge window [io 0x2000-0x2fff] |
| [ 0.342590] pci 0000:00:1c.1: bridge window [mem 0xe4800000-0xe4ffffff] |
| [ 0.342596] pci 0000:00:1c.1: bridge window [mem 0xe4000000-0xe47fffff 64bit pref] |
| [ 0.342607] pci 0000:00:1c.2: PCI bridge to [bus 04] |
| [ 0.342613] pci 0000:00:1c.2: bridge window [io 0x3000-0x3fff] |
| [ 0.342621] pci 0000:00:1c.2: bridge window [mem 0xe3400000-0xe3cfffff] |
| [ 0.342627] pci 0000:00:1c.2: bridge window [mem 0xe5000000-0xe57fffff 64bit pref] |
| [ 0.342638] pci 0000:00:1c.3: PCI bridge to [bus 05] |
| [ 0.342646] pci 0000:00:1c.3: bridge window [mem 0xe5800000-0xe58fffff] |
| [ 0.342657] pci 0000:00:1c.4: PCI bridge to [bus 06] |
| [ 0.342662] pci 0000:00:1c.4: bridge window [io 0x4000-0x4fff] |
| [ 0.342670] pci 0000:00:1c.4: bridge window [mem 0xe5900000-0xe59fffff] |
| [ 0.342681] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7 window] |
| [ 0.342683] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff window] |
| [ 0.342684] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff window] |
| [ 0.342685] pci_bus 0000:00: resource 7 [mem 0x000c0000-0x000c3fff window] |
| [ 0.342687] pci_bus 0000:00: resource 8 [mem 0x000c4000-0x000c7fff window] |
| [ 0.342688] pci_bus 0000:00: resource 9 [mem 0x000c8000-0x000cbfff window] |
| [ 0.342689] pci_bus 0000:00: resource 10 [mem 0x000d0000-0x000d3fff window] |
| [ 0.342690] pci_bus 0000:00: resource 11 [mem 0x000d4000-0x000d7fff window] |
| [ 0.342692] pci_bus 0000:00: resource 12 [mem 0x000d8000-0x000dbfff window] |
| [ 0.342693] pci_bus 0000:00: resource 13 [mem 0x000dc000-0x000dffff window] |
| [ 0.342694] pci_bus 0000:00: resource 14 [mem 0x000e0000-0x000e3fff window] |
| [ 0.342695] pci_bus 0000:00: resource 15 [mem 0x000e4000-0x000e7fff window] |
| [ 0.342696] pci_bus 0000:00: resource 16 [mem 0x000e8000-0x000ebfff window] |
| [ 0.342698] pci_bus 0000:00: resource 17 [mem 0x000ec000-0x000effff window] |
| [ 0.342699] pci_bus 0000:00: resource 18 [mem 0x000f0000-0x000fffff window] |
| [ 0.342700] pci_bus 0000:00: resource 19 [mem 0x82a00001-0xefffffff window] |
| [ 0.342702] pci_bus 0000:00: resource 20 [mem 0xfed40000-0xfed44fff window] |
| [ 0.342703] pci_bus 0000:01: resource 0 [io 0x1000-0x1fff] |
| [ 0.342704] pci_bus 0000:01: resource 1 [mem 0xe2000000-0xe30fffff] |
| [ 0.342705] pci_bus 0000:01: resource 2 [mem 0xd0000000-0xe1ffffff 64bit pref] |
| [ 0.342707] pci_bus 0000:03: resource 0 [io 0x2000-0x2fff] |
| [ 0.342708] pci_bus 0000:03: resource 1 [mem 0xe4800000-0xe4ffffff] |
| [ 0.342709] pci_bus 0000:03: resource 2 [mem 0xe4000000-0xe47fffff 64bit pref] |
| [ 0.342711] pci_bus 0000:04: resource 0 [io 0x3000-0x3fff] |
| [ 0.342712] pci_bus 0000:04: resource 1 [mem 0xe3400000-0xe3cfffff] |
| [ 0.342713] pci_bus 0000:04: resource 2 [mem 0xe5000000-0xe57fffff 64bit pref] |
| [ 0.342714] pci_bus 0000:05: resource 1 [mem 0xe5800000-0xe58fffff] |
| [ 0.342716] pci_bus 0000:06: resource 0 [io 0x4000-0x4fff] |
| [ 0.342717] pci_bus 0000:06: resource 1 [mem 0xe5900000-0xe59fffff] |
| [ 0.342807] NET: Registered protocol family 2 |
| [ 0.343003] TCP established hash table entries: 131072 (order: 8, 1048576 bytes) |
| [ 0.343196] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes) |
| [ 0.343301] TCP: Hash tables configured (established 131072 bind 65536) |
| [ 0.343326] UDP hash table entries: 8192 (order: 6, 262144 bytes) |
| [ 0.343369] UDP-Lite hash table entries: 8192 (order: 6, 262144 bytes) |
| [ 0.343447] NET: Registered protocol family 1 |
| [ 0.343909] pci 0000:01:00.0: Video device with shadowed ROM at [mem 0x000c0000-0x000dffff] |
| [ 0.343947] PCI: CLS 64 bytes, default 64 |
| [ 0.343988] Unpacking initramfs... |
| [ 0.636735] Freeing initrd memory: 17976K |
| [ 0.636787] PCI-DMA: Using software bounce buffering for IO (SWIOTLB) |
| [ 0.636793] software IO TLB [mem 0x7bd55000-0x7fd55000] (64MB) mapped at [ffff961bfbd55000-ffff961bffd54fff] |
| [ 0.637188] audit: initializing netlink subsys (disabled) |
| [ 0.637207] audit: type=2000 audit(1527215097.536:1): initialized |
| [ 0.637589] workingset: timestamp_bits=40 max_order=22 bucket_order=0 |
| [ 0.637683] zbud: loaded |
| [ 0.638456] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 250) |
| [ 0.638491] io scheduler noop registered |
| [ 0.638495] io scheduler deadline registered |
| [ 0.638509] io scheduler cfq registered (default) |
| [ 0.639444] pcieport 0000:00:01.0: Signaling PME through PCIe PME interrupt |
| [ 0.639450] pci 0000:01:00.0: Signaling PME through PCIe PME interrupt |
| [ 0.639454] pci 0000:01:00.1: Signaling PME through PCIe PME interrupt |
| [ 0.639459] pcie_pme 0000:00:01.0:pcie001: service driver pcie_pme loaded |
| [ 0.639474] pcieport 0000:00:1c.0: Signaling PME through PCIe PME interrupt |
| [ 0.639481] pcie_pme 0000:00:1c.0:pcie001: service driver pcie_pme loaded |
| [ 0.639500] pcieport 0000:00:1c.1: Signaling PME through PCIe PME interrupt |
| [ 0.639507] pcie_pme 0000:00:1c.1:pcie001: service driver pcie_pme loaded |
| [ 0.639523] pcieport 0000:00:1c.2: Signaling PME through PCIe PME interrupt |
| [ 0.639527] pci 0000:04:00.0: Signaling PME through PCIe PME interrupt |
| [ 0.639531] pci 0000:04:00.1: Signaling PME through PCIe PME interrupt |
| [ 0.639535] pci 0000:04:00.2: Signaling PME through PCIe PME interrupt |
| [ 0.639539] pci 0000:04:00.3: Signaling PME through PCIe PME interrupt |
| [ 0.639543] pci 0000:04:00.4: Signaling PME through PCIe PME interrupt |
| [ 0.639550] pcie_pme 0000:00:1c.2:pcie001: service driver pcie_pme loaded |
| [ 0.639564] pcieport 0000:00:1c.3: Signaling PME through PCIe PME interrupt |
| [ 0.639569] pci 0000:05:00.0: Signaling PME through PCIe PME interrupt |
| [ 0.639575] pcie_pme 0000:00:1c.3:pcie001: service driver pcie_pme loaded |
| [ 0.639590] pcieport 0000:00:1c.4: Signaling PME through PCIe PME interrupt |
| [ 0.639594] pci 0000:06:00.0: Signaling PME through PCIe PME interrupt |
| [ 0.639601] pcie_pme 0000:00:1c.4:pcie001: service driver pcie_pme loaded |
| [ 0.639610] pci_hotplug: PCI Hot Plug PCI Core version: 0.5 |
| [ 0.639623] pciehp 0000:00:1c.1:pcie004: Slot #0 AttnBtn- PwrCtrl- MRL- AttnInd- PwrInd- HotPlug+ Surprise+ Interlock- NoCompl+ LLActRep+ |
| [ 0.639657] pciehp 0000:00:1c.1:pcie004: service driver pciehp loaded |
| [ 0.639667] pciehp 0000:00:1c.2:pcie004: Slot #0 AttnBtn- PwrCtrl- MRL- AttnInd- PwrInd- HotPlug+ Surprise+ Interlock- NoCompl+ LLActRep+ |
| [ 0.639698] pciehp 0000:00:1c.2:pcie004: service driver pciehp loaded |
| [ 0.639702] pciehp: PCI Express Hot Plug Controller Driver version: 0.4 |
| [ 0.639717] vesafb: mode is 1920x1080x32, linelength=7680, pages=0 |
| [ 0.639720] vesafb: scrolling: redraw |
| [ 0.639724] vesafb: Truecolor: size=8:8:8:8, shift=24:16:8:0 |
| [ 0.639740] vesafb: framebuffer at 0xe1000000, mapped to 0xffffac2402000000, using 8128k, total 8128k |
| [ 0.644135] Console: switching to colour frame buffer device 240x67 |
| [ 0.648413] fb0: VESA VGA frame buffer device |
| [ 0.648441] intel_idle: MWAIT substates: 0x21120 |
| [ 0.648442] intel_idle: v0.4.1 model 0x3A |
| [ 0.648722] intel_idle: lapic_timer_reliable_states 0xffffffff |
| [ 0.649461] GHES: HEST is not enabled! |
| [ 0.649531] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled |
| [ 0.670395] serial8250: ttyS0 at I/O 0x3f8 (irq = 4, base_baud = 115200) is a 16550A |
| [ 0.670766] Linux agpgart interface v0.103 |
| [ 0.670852] AMD IOMMUv2 driver by Joerg Roedel <jroedel@suse.de> |
| [ 0.670874] AMD IOMMUv2 functionality not available on this system |
| [ 0.671516] i8042: PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at 0x60,0x64 irq 1,12 |
| [ 0.673318] i8042: Detected active multiplexing controller, rev 1.1 |
| [ 0.674111] serio: i8042 KBD port at 0x60,0x64 irq 1 |
| [ 0.674132] serio: i8042 AUX0 port at 0x60,0x64 irq 12 |
| [ 0.674158] serio: i8042 AUX1 port at 0x60,0x64 irq 12 |
| [ 0.674178] serio: i8042 AUX2 port at 0x60,0x64 irq 12 |
| [ 0.674267] serio: i8042 AUX3 port at 0x60,0x64 irq 12 |
| [ 0.674438] mousedev: PS/2 mouse device common for all mice |
| [ 0.674484] rtc_cmos 00:03: RTC can wake from S4 |
| [ 0.674648] rtc_cmos 00:03: rtc core: registered rtc_cmos as rtc0 |
| [ 0.674698] rtc_cmos 00:03: alarms up to one month, 242 bytes nvram, hpet irqs |
| [ 0.674730] intel_pstate: Intel P-state driver initializing |
| [ 0.675250] ledtrig-cpu: registered to indicate activity on CPUs |
| [ 0.675708] NET: Registered protocol family 10 |
| [ 0.676204] mip6: Mobile IPv6 |
| [ 0.676234] NET: Registered protocol family 17 |
| [ 0.676272] mpls_gso: MPLS GSO support |
| [ 0.676829] microcode: sig=0x306a9, pf=0x10, revision=0x1f |
| [ 0.677085] microcode: Microcode Update Driver: v2.01 <tigran@aivazian.fsnet.co.uk>, Peter Oruba |
| [ 0.677437] registered taskstats version 1 |
| [ 0.677502] zswap: loaded using pool lzo/zbud |
| [ 0.677795] ima: No TPM chip found, activating TPM-bypass! |
| [ 0.678563] rtc_cmos 00:03: setting system clock to 2018-05-25 02:24:58 UTC (1527215098) |
| [ 0.678689] PM: Hibernation image not present or could not be loaded. |
| [ 0.680855] Freeing unused kernel memory: 1416K |
| [ 0.680893] Write protecting the kernel read-only data: 12288k |
| [ 0.681814] Freeing unused kernel memory: 1936K |
| [ 0.686681] Freeing unused kernel memory: 1228K |
| [ 0.697764] x86/mm: Checked W+X mappings: passed, no W+X pages found. |
| [ 0.699368] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input0 |
| [ 0.723385] random: systemd-udevd: uninitialized urandom read (16 bytes read) |
| [ 0.723561] random: systemd-udevd: uninitialized urandom read (16 bytes read) |
| [ 0.723621] random: systemd-udevd: uninitialized urandom read (16 bytes read) |
| [ 0.724946] random: udevadm: uninitialized urandom read (16 bytes read) |
| [ 0.726996] random: udevadm: uninitialized urandom read (16 bytes read) |
| [ 0.731120] random: udevadm: uninitialized urandom read (16 bytes read) |
| [ 0.733002] random: udevadm: uninitialized urandom read (16 bytes read) |
| [ 0.734920] random: udevadm: uninitialized urandom read (16 bytes read) |
| [ 0.736763] random: udevadm: uninitialized urandom read (16 bytes read) |
| [ 0.738660] random: udevadm: uninitialized urandom read (16 bytes read) |
| [ 0.778646] pps_core: LinuxPPS API ver. 1 registered |
| [ 0.779588] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it> |
| [ 0.781155] ACPI: bus type USB registered |
| [ 0.782386] usbcore: registered new interface driver usbfs |
| [ 0.782439] PTP clock support registered |
| [ 0.784706] usbcore: registered new interface driver hub |
| [ 0.785631] usbcore: registered new device driver usb |
| [ 0.788022] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver |
| [ 0.789386] SCSI subsystem initialized |
| [ 0.790692] ehci-pci: EHCI PCI platform driver |
| [ 0.791937] ehci-pci 0000:00:1a.0: EHCI Host Controller |
| [ 0.793046] ehci-pci 0000:00:1a.0: new USB bus registered, assigned bus number 1 |
| [ 0.794282] ehci-pci 0000:00:1a.0: debug port 2 |
| [ 0.796672] sdhci: Secure Digital Host Controller Interface driver |
| [ 0.797816] sdhci: Copyright(c) Pierre Ossman |
| [ 0.799366] ehci-pci 0000:00:1a.0: cache line size of 64 is not supported |
| [ 0.799387] ehci-pci 0000:00:1a.0: irq 21, io mem 0xe5a3e000 |
| [ 0.800684] libata version 3.00 loaded. |
| [ 0.800983] e1000e: Intel(R) PRO/1000 Network Driver - 3.2.6-k |
| [ 0.802046] e1000e: Copyright(c) 1999 - 2015 Intel Corporation. |
| [ 0.803172] AVX version of gcm_enc/dec engaged. |
| [ 0.803994] AES CTR mode by8 optimization enabled |
| [ 0.817765] ehci-pci 0000:00:1a.0: USB 2.0 started, EHCI 1.00 |
| [ 0.819040] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002 |
| [ 0.819838] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 |
| [ 0.820625] usb usb1: Product: EHCI Host Controller |
| [ 0.821413] usb usb1: Manufacturer: Linux 4.9.0-6-amd64 ehci_hcd |
| [ 0.822230] usb usb1: SerialNumber: 0000:00:1a.0 |
| [ 0.823174] hub 1-0:1.0: USB hub found |
| [ 0.823949] hub 1-0:1.0: 3 ports detected |
| [ 0.824900] ehci-pci 0000:00:1d.0: EHCI Host Controller |
| [ 0.825709] ehci-pci 0000:00:1d.0: new USB bus registered, assigned bus number 2 |
| [ 0.826532] ehci-pci 0000:00:1d.0: debug port 2 |
| [ 0.831224] ehci-pci 0000:00:1d.0: cache line size of 64 is not supported |
| [ 0.831239] ehci-pci 0000:00:1d.0: irq 19, io mem 0xe5a3f000 |
| [ 0.845725] ehci-pci 0000:00:1d.0: USB 2.0 started, EHCI 1.00 |
| [ 0.846608] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002 |
| [ 0.847402] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1 |
| [ 0.848203] usb usb2: Product: EHCI Host Controller |
| [ 0.848993] usb usb2: Manufacturer: Linux 4.9.0-6-amd64 ehci_hcd |
| [ 0.849808] usb usb2: SerialNumber: 0000:00:1d.0 |
| [ 0.850819] hub 2-0:1.0: USB hub found |
| [ 0.851616] hub 2-0:1.0: 3 ports detected |
| [ 0.852711] xhci_hcd 0000:00:14.0: xHCI Host Controller |
| [ 0.853916] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 3 |
| [ 0.856041] xhci_hcd 0000:00:14.0: hcc params 0x200071a1 hci version 0x100 quirks 0x0000b930 |
| [ 0.857082] xhci_hcd 0000:00:14.0: cache line size of 64 is not supported |
| [ 0.857180] usb usb3: New USB device found, idVendor=1d6b, idProduct=0002 |
| [ 0.857750] firewire_ohci 0000:04:00.0: added OHCI v1.10 device as card 0, 4 IR + 4 IT contexts, quirks 0x10 |
| [ 0.857794] sdhci-pci 0000:04:00.1: SDHCI controller found [197b:2392] (rev 30) |
| [ 0.859178] mmc0: SDHCI controller on PCI [0000:04:00.1] using DMA |
| [ 0.859187] sdhci-pci 0000:04:00.2: SDHCI controller found [197b:2391] (rev 30) |
| [ 0.859359] sdhci-pci 0000:04:00.2: Refusing to bind to secondary interface. |
| [ 0.863466] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1 |
| [ 0.864520] usb usb3: Product: xHCI Host Controller |
| [ 0.865565] usb usb3: Manufacturer: Linux 4.9.0-6-amd64 xhci-hcd |
| [ 0.866637] usb usb3: SerialNumber: 0000:00:14.0 |
| [ 0.867894] hub 3-0:1.0: USB hub found |
| [ 0.868954] hub 3-0:1.0: 4 ports detected |
| [ 0.870060] xhci_hcd 0000:00:14.0: xHCI Host Controller |
| [ 0.871061] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 4 |
| [ 0.872091] usb usb4: New USB device found, idVendor=1d6b, idProduct=0003 |
| [ 0.873099] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1 |
| [ 0.874150] usb usb4: Product: xHCI Host Controller |
| [ 0.875163] usb usb4: Manufacturer: Linux 4.9.0-6-amd64 xhci-hcd |
| [ 0.876197] usb usb4: SerialNumber: 0000:00:14.0 |
| [ 0.877438] hub 4-0:1.0: USB hub found |
| [ 0.878553] hub 4-0:1.0: 4 ports detected |
| [ 0.879781] e1000e 0000:00:19.0: Interrupt Throttling Rate (ints/sec) set to dynamic conservative mode |
| [ 1.015096] mmc0: new SDHC card at address aaaa |
| [ 1.018667] e1000e 0000:00:19.0 0000:00:19.0 (uninitialized): registered PHC clock |
| [ 1.019087] mmcblk0: mmc0:aaaa SC32G 29.7 GiB (ro) |
| [ 1.030586] mmcblk0: p1 p2 |
| [ 1.149735] usb 1-1: new high-speed USB device number 2 using ehci-pci |
| [ 1.152589] e1000e 0000:00:19.0 eth0: (PCI Express:2.5GT/s:Width x1) 2c:59:e5:03:70:d4 |
| [ 1.154601] e1000e 0000:00:19.0 eth0: Intel(R) PRO/1000 Network Connection |
| [ 1.156648] e1000e 0000:00:19.0 eth0: MAC: 10, PHY: 11, PBA No: FFFFFF-0FF |
| [ 1.158598] ahci 0000:00:1f.2: version 3.0 |
| [ 1.158928] ahci 0000:00:1f.2: SSS flag set, parallel bus scan disabled |
| [ 1.159597] e1000e 0000:00:19.0 enp0s25: renamed from eth0 |
| [ 1.172880] ahci 0000:00:1f.2: AHCI 0001.0300 32 slots 6 ports 6 Gbps 0x1f impl SATA mode |
| [ 1.174479] ahci 0000:00:1f.2: flags: 64bit ncq sntf ilck stag pm led clo pio slum part apst |
| [ 1.177606] scsi host0: ahci |
| [ 1.177718] usb 2-1: new high-speed USB device number 2 using ehci-pci |
| [ 1.181263] scsi host1: ahci |
| [ 1.183248] scsi host2: ahci |
| [ 1.185009] scsi host3: ahci |
| [ 1.186771] scsi host4: ahci |
| [ 1.188425] scsi host5: ahci |
| [ 1.189960] ata1: SATA max UDMA/133 abar m2048@0xe5a3d000 port 0xe5a3d100 irq 33 |
| [ 1.191461] ata2: SATA max UDMA/133 abar m2048@0xe5a3d000 port 0xe5a3d180 irq 33 |
| [ 1.192917] ata3: SATA max UDMA/133 abar m2048@0xe5a3d000 port 0xe5a3d200 irq 33 |
| [ 1.194357] ata4: SATA max UDMA/133 abar m2048@0xe5a3d000 port 0xe5a3d280 irq 33 |
| [ 1.195728] ata5: SATA max UDMA/133 abar m2048@0xe5a3d000 port 0xe5a3d300 irq 33 |
| [ 1.197077] ata6: DUMMY |
| [ 1.197720] usb 3-1: new high-speed USB device number 2 using xhci_hcd |
| [ 1.200190] ahci 0000:06:00.0: AHCI 0001.0100 32 slots 1 ports 3 Gbps 0x1 impl SATA mode |
| [ 1.201572] ahci 0000:06:00.0: flags: 64bit ncq pm led clo pmp pio slum part |
| [ 1.203313] scsi host6: ahci |
| [ 1.204781] ata7: SATA max UDMA/133 abar m512@0xe5910000 port 0xe5910100 irq 34 |
| [ 1.215546] random: fast init done |
| [ 1.298520] usb 1-1: New USB device found, idVendor=8087, idProduct=0024 |
| [ 1.300893] usb 1-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0 |
| [ 1.303813] hub 1-1:1.0: USB hub found |
| [ 1.306764] hub 1-1:1.0: 6 ports detected |
| [ 1.326548] usb 2-1: New USB device found, idVendor=8087, idProduct=0024 |
| [ 1.328395] usb 2-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0 |
| [ 1.330677] hub 2-1:1.0: USB hub found |
| [ 1.333280] hub 2-1:1.0: 8 ports detected |
| [ 1.338071] usb 3-1: New USB device found, idVendor=0424, idProduct=5434 |
| [ 1.340500] usb 3-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0 |
| [ 1.343422] hub 3-1:1.0: USB hub found |
| [ 1.345497] hub 3-1:1.0: 4 ports detected |
| [ 1.373887] firewire_core 0000:04:00.0: created device fw0: GUID ffe473fffffffffe, S400 |
| [ 1.457776] usb 4-1: new SuperSpeed USB device number 2 using xhci_hcd |
| [ 1.478136] usb 4-1: New USB device found, idVendor=0424, idProduct=5434 |
| [ 1.480507] usb 4-1: New USB device strings: Mfr=2, Product=3, SerialNumber=1 |
| [ 1.482855] usb 4-1: Product: USB5534 |
| [ 1.485160] usb 4-1: Manufacturer: SMSC |
| [ 1.487468] usb 4-1: SerialNumber: 1239567 |
| [ 1.490413] hub 4-1:1.0: USB hub found |
| [ 1.493017] hub 4-1:1.0: 4 ports detected |
| [ 1.512855] ata1: SATA link down (SStatus 0 SControl 300) |
| [ 1.520823] ata7: SATA link down (SStatus 0 SControl 300) |
| [ 1.597844] usb 1-1.1: new full-speed USB device number 3 using ehci-pci |
| [ 1.621823] usb 2-1.6: new full-speed USB device number 3 using ehci-pci |
| [ 1.661812] tsc: Refined TSC clocksource calibration: 2594.107 MHz |
| [ 1.664099] clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x25647d583cf, max_idle_ns: 440795304232 ns |
| [ 1.707681] usb 1-1.1: New USB device found, idVendor=138a, idProduct=003d |
| [ 1.710090] usb 1-1.1: New USB device strings: Mfr=0, Product=0, SerialNumber=1 |
| [ 1.712428] usb 1-1.1: SerialNumber: 0030020b3f80 |
| [ 1.737925] usb 2-1.6: New USB device found, idVendor=0a5c, idProduct=21e1 |
| [ 1.740086] usb 2-1.6: New USB device strings: Mfr=1, Product=2, SerialNumber=3 |
| [ 1.742281] usb 2-1.6: Product: BCM20702A0 |
| [ 1.744418] usb 2-1.6: Manufacturer: Broadcom Corp |
| [ 1.746677] usb 2-1.6: SerialNumber: B8763FD92628 |
| [ 1.758573] input: PS/2 Generic Mouse as /devices/platform/i8042/serio1/input/input5 |
| [ 1.829398] ata2: SATA link up 6.0 Gbps (SStatus 133 SControl 300) |
| [ 1.949984] ata2.00: ATA-10: ST2000LM015-2E8174, SDM1, max UDMA/133 |
| [ 1.952296] ata2.00: 3907029168 sectors, multi 16: LBA48 NCQ (depth 31/32), AA |
| [ 2.004562] ata2.00: configured for UDMA/133 |
| [ 2.007329] scsi 1:0:0:0: Direct-Access ATA ST2000LM015-2E81 SDM1 PQ: 0 ANSI: 5 |
| [ 2.246611] psmouse serio4: synaptics: queried max coordinates: x [..5648], y [..4806] |
| [ 2.286274] psmouse serio4: synaptics: queried min coordinates: x [1292..], y [1048..] |
| [ 2.357672] ata3: SATA link up 1.5 Gbps (SStatus 113 SControl 300) |
| [ 2.359719] psmouse serio4: synaptics: Touchpad model: 1, fw: 8.1, id: 0x1e2b1, caps: 0xd40123/0x840300/0x26c00/0x0, board id: 2009, fw id: 1119621 |
| [ 2.366186] ata3.00: ATAPI: hp CDDVDW SN-208DB, HH01, max UDMA/100 |
| [ 2.376639] ata3.00: configured for UDMA/100 |
| [ 2.397443] scsi 2:0:0:0: CD-ROM hp CDDVDW SN-208DB HH01 PQ: 0 ANSI: 5 |
| [ 2.404597] input: SynPS/2 Synaptics TouchPad as /devices/platform/i8042/serio4/input/input8 |
| [ 2.686087] clocksource: Switched to clocksource tsc |
| [ 2.725514] ata4: SATA link down (SStatus 0 SControl 300) |
| [ 3.041364] ata5: SATA link up 3.0 Gbps (SStatus 123 SControl 300) |
| [ 3.044600] ata5.00: ATA-7: GB0250EAFYK, HPG2, max UDMA/133 |
| [ 3.046920] ata5.00: 488397168 sectors, multi 0: LBA48 NCQ (depth 31/32), AA |
| [ 3.050096] ata5.00: configured for UDMA/133 |
| [ 3.052795] scsi 4:0:0:0: Direct-Access ATA GB0250EAFYK HPG2 PQ: 0 ANSI: 5 |
| [ 3.089883] sd 1:0:0:0: [sda] 3907029168 512-byte logical blocks: (2.00 TB/1.82 TiB) |
| [ 3.089997] sd 4:0:0:0: [sdb] 488397168 512-byte logical blocks: (250 GB/233 GiB) |
| [ 3.090105] sd 4:0:0:0: [sdb] Write Protect is off |
| [ 3.090109] sd 4:0:0:0: [sdb] Mode Sense: 00 3a 00 00 |
| [ 3.090156] sd 4:0:0:0: [sdb] Write cache: disabled, read cache: enabled, doesn't support DPO or FUA |
| [ 3.102305] sd 1:0:0:0: [sda] 4096-byte physical blocks |
| [ 3.105474] sd 1:0:0:0: [sda] Write Protect is off |
| [ 3.107477] sd 1:0:0:0: [sda] Mode Sense: 00 3a 00 00 |
| [ 3.107503] sd 1:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA |
| [ 3.130622] sr 2:0:0:0: [sr0] scsi3-mmc drive: 24x/24x writer dvd-ram cd/rw xa/form2 cdda tray |
| [ 3.132913] cdrom: Uniform CD-ROM driver Revision: 3.20 |
| [ 3.135411] sdb: sdb1 sdb2 |
| [ 3.135734] sr 2:0:0:0: Attached scsi CD-ROM sr0 |
| [ 3.138709] sd 4:0:0:0: [sdb] Attached SCSI disk |
| [ 3.160316] sda: sda1 |
| [ 3.162976] sd 1:0:0:0: [sda] Attached SCSI disk |
| [ 3.381271] PM: Starting manual resume from disk |
| [ 3.383424] PM: Hibernation image partition 8:18 present |
| [ 3.383425] PM: Looking for hibernation image. |
| [ 3.383699] PM: Image not found (code -22) |
| [ 3.383701] PM: Hibernation image not present or could not be loaded. |
| [ 3.568073] EXT4-fs (sdb1): mounted filesystem with ordered data mode. Opts: (null) |
| [ 4.836279] ip_tables: (C) 2000-2006 Netfilter Core Team |
| [ 4.934033] systemd[1]: systemd 232 running in system mode. (+PAM +AUDIT +SELINUX +IMA +APPARMOR +SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ +LZ4 +SECCOMP +BLKID +ELFUTILS +KMOD +IDN) |
| [ 4.936547] systemd[1]: Detected architecture x86-64. |
| [ 5.010554] systemd[1]: Set hostname to <ROB-DESKTOP-TEST>. |
| [ 5.166780] random: crng init done |
| [ 6.221766] systemd[1]: Listening on Syslog Socket. |
| [ 6.227575] systemd[1]: Listening on Journal Socket (/dev/log). |
| [ 6.232995] systemd[1]: Listening on Journal Audit Socket. |
| [ 6.238106] systemd[1]: Listening on udev Kernel Socket. |
| [ 6.243315] systemd[1]: Created slice System Slice. |
| [ 6.248212] systemd[1]: Created slice system-getty.slice. |
| [ 6.253753] systemd[1]: Mounting Huge Pages File System... |
| [ 6.778381] EXT4-fs (sdb1): re-mounted. Opts: errors=remount-ro |
| [ 6.970070] systemd-journald[278]: Received request to flush runtime journal from PID 1 |
| [ 9.155207] input: PC Speaker as /devices/platform/pcspkr/input/input9 |
| [ 9.225574] input: Lid Switch as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/device:25/PNP0C09:00/PNP0C0D:00/input/input10 |
| [ 9.226568] ACPI: Lid Switch [LID] |
| [ 9.227575] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input11 |
| [ 9.228559] ACPI: Power Button [PWRF] |
| [ 9.415629] ACPI Warning: SystemIO range 0x0000000000000528-0x000000000000052F conflicts with OpRegion 0x0000000000000500-0x000000000000057F (\PMIO) (20160831/utaddress-247) |
| [ 9.418053] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver |
| [ 9.420320] ACPI Warning: SystemIO range 0x00000000000004C0-0x00000000000004CF conflicts with OpRegion 0x0000000000000480-0x00000000000004EB (\GPIO) (20160831/utaddress-247) |
| [ 9.422610] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver |
| [ 9.425155] ACPI Warning: SystemIO range 0x00000000000004B0-0x00000000000004BF conflicts with OpRegion 0x0000000000000480-0x00000000000004EB (\GPIO) (20160831/utaddress-247) |
| [ 9.427440] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver |
| [ 9.429726] ACPI Warning: SystemIO range 0x0000000000000480-0x00000000000004AF conflicts with OpRegion 0x0000000000000480-0x00000000000004EB (\GPIO) (20160831/utaddress-247) |
| [ 9.432119] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver |
| [ 9.434509] lpc_ich: Resource conflict(s) found affecting gpio_ich |
| [ 9.475495] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4 |
| [ 9.586789] ACPI: AC Adapter [AC] (on-line) |
| [ 9.622390] ACPI: Battery Slot [BAT0] (battery present) |
| [ 9.623554] ACPI: Battery Slot [BAT1] (battery absent) |
| [ 9.665494] sd 1:0:0:0: Attached scsi generic sg0 type 0 |
| [ 9.666675] sr 2:0:0:0: Attached scsi generic sg1 type 5 |
| [ 9.667844] sd 4:0:0:0: Attached scsi generic sg2 type 0 |
| [ 9.842739] RAPL PMU: API unit is 2^-32 Joules, 3 fixed counters, 163840 ms ovfl timer |
| [ 9.845669] RAPL PMU: hw unit of domain pp0-core 2^-16 Joules |
| [ 9.848421] RAPL PMU: hw unit of domain package 2^-16 Joules |
| [ 9.851117] RAPL PMU: hw unit of domain pp1-gpu 2^-16 Joules |
| [ 10.553679] [drm] Initialized |
| [ 11.006421] iTCO_vendor_support: vendor-support=0 |
| [ 11.007925] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.11 |
| [ 11.009706] iTCO_wdt: Found a Panther Point TCO device (Version=2, TCOBASE=0x0560) |
| [ 11.011870] iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0) |
| [ 11.170039] wmi: Mapper loaded |
| [ 11.546041] checking generic (e1000000 7f0000) vs hw (d0000000 10000000) |
| [ 11.546043] checking generic (e1000000 7f0000) vs hw (e0000000 2000000) |
| [ 11.546044] fb: switching to nouveaufb from VESA VGA |
| [ 11.547416] Console: switching to colour dummy device 80x25 |
| [ 11.547649] nouveau 0000:01:00.0: NVIDIA GM204 (124170a1) |
| [ 11.582210] mei_me 0000:00:16.0: wait hw ready failed |
| [ 11.582217] mei_me 0000:00:16.0: hw_start failed ret = -62 |
| [ 11.582232] mei_me 0000:00:16.0: H_RST is set = 0x80000015 |
| [ 11.603228] ath: phy0: ASPM enabled: 0x43 |
| [ 11.603234] ath: EEPROM regdomain: 0x6a |
| [ 11.603235] ath: EEPROM indicates we should expect a direct regpair map |
| [ 11.603238] ath: Country alpha2 being used: 00 |
| [ 11.603238] ath: Regpair used: 0x6a |
| [ 11.612328] Bluetooth: Core ver 2.22 |
| [ 11.612345] NET: Registered protocol family 31 |
| [ 11.612350] Bluetooth: HCI device and connection manager initialized |
| [ 11.612356] Bluetooth: HCI socket layer initialized |
| [ 11.612362] Bluetooth: L2CAP socket layer initialized |
| [ 11.612370] Bluetooth: SCO socket layer initialized |
| [ 11.614998] nouveau 0000:01:00.0: bios: version 84.04.6d.00.08 |
| [ 11.615268] nouveau 0000:01:00.0: disp: dcb 15 type 8 unknown |
| [ 11.638861] nouveau 0000:01:00.0: firmware: failed to load nvidia/gm204/gr/sw_nonctx.bin (-2) |
| [ 11.638874] nouveau 0000:01:00.0: Direct firmware load for nvidia/gm204/gr/sw_nonctx.bin failed with error -2 |
| [ 11.638887] nouveau 0000:01:00.0: gr: failed to load gr/sw_nonctx |
| [ 11.638898] nouveau 0000:01:00.0: gr ctor failed, -2 |
| [ 11.638911] nouveau: probe of 0000:01:00.0 failed with error -2 |
| [ 11.929837] ieee80211 phy0: Selected rate control algorithm 'minstrel_ht' |
| [ 11.930328] ieee80211 phy0: Atheros AR9462 Rev:2 mem=0xffffac2402080000, irq=19 |
| [ 11.983929] usbcore: registered new interface driver btusb |
| [ 12.422782] ath9k 0000:05:00.0 wlp5s0: renamed from wlan0 |
| [ 13.233127] Adding 31307772k swap on /dev/sdb2. Priority:-1 extents:1 across:31307772k FS |
| [ 13.598360] mei_me 0000:00:16.0: wait hw ready failed |
| [ 13.598378] mei_me 0000:00:16.0: hw_start failed ret = -62 |
| [ 13.598399] mei_me 0000:00:16.0: H_RST is set = 0x80000015 |
| [ 15.614438] mei_me 0000:00:16.0: wait hw ready failed |
| [ 15.614450] mei_me 0000:00:16.0: hw_start failed ret = -62 |
| [ 15.614457] mei_me 0000:00:16.0: reset: reached maximal consecutive resets: disabling the device |
| [ 15.614467] mei_me 0000:00:16.0: reset failed ret = -19 |
| [ 15.614473] mei_me 0000:00:16.0: link layer initialization failed. |
| [ 15.614479] mei_me 0000:00:16.0: init hw failure. |
| [ 15.614691] mei_me 0000:00:16.0: initialization failed. |
| [ 15.615186] pcieport 0000:00:01.0: can't derive routing for PCI INT B |
| [ 15.615196] snd_hda_intel 0000:01:00.1: PCI INT B: no GSI |
| [ 15.615209] snd_hda_intel 0000:01:00.1: Disabling MSI |
| [ 15.615222] snd_hda_intel 0000:01:00.1: Handle vga_switcheroo audio client |
| [ 16.172976] snd_hda_codec_idt hdaudioC0D0: autoconfig for 92HD81B1X5: line_outs=1 (0xa/0x0/0x0/0x0/0x0) type:line |
| [ 16.172992] snd_hda_codec_idt hdaudioC0D0: speaker_outs=1 (0xd/0x0/0x0/0x0/0x0) |
| [ 16.173002] snd_hda_codec_idt hdaudioC0D0: hp_outs=1 (0xb/0x0/0x0/0x0/0x0) |
| [ 16.173009] snd_hda_codec_idt hdaudioC0D0: mono: mono_out=0x0 |
| [ 16.173015] snd_hda_codec_idt hdaudioC0D0: inputs: |
| [ 16.173022] snd_hda_codec_idt hdaudioC0D0: Mic=0xc |
| [ 16.173029] snd_hda_codec_idt hdaudioC0D0: Internal Mic=0x11 |
| [ 16.173035] snd_hda_codec_idt hdaudioC0D0: Line=0xf |
| [ 16.218816] input: HDA Digital PCBeep as /devices/pci0000:00/0000:00:1b.0/sound/card0/input12 |
| [ 16.219694] input: HDA Intel PCH Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input13 |
| [ 16.219839] input: HDA Intel PCH Line as /devices/pci0000:00/0000:00:1b.0/sound/card0/input14 |
| [ 16.221689] input: HDA Intel PCH Dock Line Out as /devices/pci0000:00/0000:00:1b.0/sound/card0/input15 |
| [ 16.221781] input: HDA Intel PCH Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card0/input16 |
| [ 16.221870] input: HDA Intel PCH HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:1b.0/sound/card0/input17 |
| [ 16.221951] input: HDA Intel PCH HDMI/DP,pcm=7 as /devices/pci0000:00/0000:00:1b.0/sound/card0/input18 |
| [ 16.222029] input: HDA Intel PCH HDMI/DP,pcm=8 as /devices/pci0000:00/0000:00:1b.0/sound/card0/input19 |
| [ 17.979243] intel_rapl: Found RAPL domain package |
| [ 17.979259] intel_rapl: Found RAPL domain core |
| [ 18.152650] Bluetooth: BNEP (Ethernet Emulation) ver 1.3 |
| [ 18.152665] Bluetooth: BNEP filters: protocol multicast |
| [ 18.152678] Bluetooth: BNEP socket layer initialized |
| [ 18.654648] snd_hda_intel 0000:01:00.1: azx_get_response timeout, switching to polling mode: last cmd=0x000f0001 |
| [ 19.359958] input: HDA NVidia HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:01.0/0000:01:00.1/sound/card1/input20 |
| [ 19.360184] input: HDA NVidia HDMI/DP,pcm=7 as /devices/pci0000:00/0000:00:01.0/0000:01:00.1/sound/card1/input21 |
| [ 19.360353] input: HDA NVidia HDMI/DP,pcm=8 as /devices/pci0000:00/0000:00:01.0/0000:01:00.1/sound/card1/input22 |
| [ 19.360430] input: HDA NVidia HDMI/DP,pcm=9 as /devices/pci0000:00/0000:00:01.0/0000:01:00.1/sound/card1/input23 |
| [ 20.955516] IPv6: ADDRCONF(NETDEV_UP): enp0s25: link is not ready |
| [ 21.223054] IPv6: ADDRCONF(NETDEV_UP): enp0s25: link is not ready |
| [ 21.234155] IPv6: ADDRCONF(NETDEV_UP): wlp5s0: link is not ready |
| [ 21.246251] IPv6: ADDRCONF(NETDEV_UP): wlp5s0: link is not ready |
| [ 21.260763] IPv6: ADDRCONF(NETDEV_UP): wlp5s0: link is not ready |
| [ 21.739069] IPv6: ADDRCONF(NETDEV_UP): wlp5s0: link is not ready |
| [ 24.108870] e1000e: enp0s25 NIC Link is Up 1000 Mbps Full Duplex, Flow Control: Rx/Tx |
| [ 24.108925] IPv6: ADDRCONF(NETDEV_CHANGE): enp0s25: link becomes ready |
| [ 27.528636] fuse init (API version 7.26) |
| [ 47.558400] EXT4-fs (mmcblk0p2): mounted filesystem with ordered data mode. Opts: (null) |
| [ 50.949720] Bluetooth: RFCOMM TTY layer initialized |
| [ 50.949728] Bluetooth: RFCOMM socket layer initialized |
| [ 50.949732] Bluetooth: RFCOMM ver 1.11 |
| [ 300.129172] mce: [Hardware Error]: Machine check events logged |
| [ 367.199788] IPv6: ADDRCONF(NETDEV_UP): wlp5s0: link is not ready |
| [ 682.192487] IPv6: ADDRCONF(NETDEV_UP): wlp5s0: link is not ready |