blob: 279109936d0ba14a1d7d0b581b80e246ee30f340 [file] [log] [blame]
[ 0.000000] Initializing cgroup subsys cpuset
[ 0.000000] Initializing cgroup subsys cpu
[ 0.000000] Linux version 3.5.0-17-generic (buildd@allspice) (gcc version 4.7.2 (Ubuntu/Linaro 4.7.2-2ubuntu1) ) #28-Ubuntu SMP Tue Oct 9 19:31:23 UTC 2012 (Ubuntu 3.5.0-17.28-generic 3.5.5)
[ 0.000000] Command line: BOOT_IMAGE=/boot/vmlinuz-3.5.0-17-generic root=UUID=4fcc9a5d-b1f6-4986-9caf-7a7651ac83f2 ro recovery nomodeset
[ 0.000000] KERNEL supported cpus:
[ 0.000000] Intel GenuineIntel
[ 0.000000] AMD AuthenticAMD
[ 0.000000] Centaur CentaurHauls
[ 0.000000] e820: BIOS-provided physical RAM map:
[ 0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009fbff] usable
[ 0.000000] BIOS-e820: [mem 0x000000000009fc00-0x000000000009ffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000000f0000-0x00000000000fffff] reserved
[ 0.000000] BIOS-e820: [mem 0x0000000000100000-0x000000001dedffff] usable
[ 0.000000] BIOS-e820: [mem 0x000000001dee0000-0x000000001fffffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000e0000000-0x00000000efffffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fec00000-0x00000000fec00fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fecc0000-0x00000000fecc0fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000ff000000-0x00000000ffffffff] reserved
[ 0.000000] NX (Execute Disable) protection: active
[ 0.000000] DMI present.
[ 0.000000] DMI: ASUS M2V-MX SE, BIOS 4.0-5192-g812d624 01/03/2014
[ 0.000000] e820: update [mem 0x00000000-0x0000ffff] usable ==> reserved
[ 0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable
[ 0.000000] AGP bridge at 00:00:00
[ 0.000000] Aperture from AGP @ c0000000 old size 32 MB
[ 0.000000] Aperture from AGP @ c0000000 size 256 MB (APSIZE f00)
[ 0.000000] e820: last_pfn = 0x1dee0 max_arch_pfn = 0x400000000
[ 0.000000] MTRR default type: uncachable
[ 0.000000] MTRR fixed ranges enabled:
[ 0.000000] 00000-9FFFF write-back
[ 0.000000] A0000-BFFFF uncachable
[ 0.000000] C0000-FFFFF write-back
[ 0.000000] MTRR variable ranges enabled:
[ 0.000000] 0 base 0000000000 mask FFE0000000 write-back
[ 0.000000] 1 base 001E000000 mask FFFE000000 uncachable
[ 0.000000] 2 disabled
[ 0.000000] 3 disabled
[ 0.000000] 4 disabled
[ 0.000000] 5 disabled
[ 0.000000] 6 disabled
[ 0.000000] 7 disabled
[ 0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
[ 0.000000] original variable MTRRs
[ 0.000000] reg 0, base: 0GB, range: 512MB, type WB
[ 0.000000] reg 1, base: 480MB, range: 32MB, type UC
[ 0.000000] total RAM covered: 480M
[ 0.000000] Found optimal setting for mtrr clean up
[ 0.000000] gran_size: 64K chunk_size: 64M num_reg: 2 lose cover RAM: 0G
[ 0.000000] New variable MTRRs
[ 0.000000] reg 0, base: 0GB, range: 512MB, type WB
[ 0.000000] reg 1, base: 480MB, range: 32MB, type UC
[ 0.000000] initial memory mapped: [mem 0x00000000-0x1fffffff]
[ 0.000000] Base memory trampoline at [ffff880000099000] 99000 size 24576
[ 0.000000] init_memory_mapping: [mem 0x00000000-0x1dedffff]
[ 0.000000] [mem 0x00000000-0x1ddfffff] page 2M
[ 0.000000] [mem 0x1de00000-0x1dedffff] page 4k
[ 0.000000] kernel direct mapping tables up to 0x1dedffff @ [mem 0x1dedd000-0x1dedffff]
[ 0.000000] RAMDISK: [mem 0x1c9c5000-0x1d84bfff]
[ 0.000000] ACPI: RSDP 00000000000fdbd0 00014 (v00 CORE )
[ 0.000000] ACPI: RSDT 000000001dee0424 00040 (v01 CORE COREBOOT 00000000 CORE 00000000)
[ 0.000000] ACPI: FACP 000000001dee0efd 000F4 (v04 CORE COREBOOT 00000000 CORE 0000002A)
[ 0.000000] ACPI: DSDT 000000001dee0540 009BD (v01 CORE COREBOOT 00000001 INTL 20130626)
[ 0.000000] ACPI: FACS 000000001dee0500 00040
[ 0.000000] ACPI: HPET 000000001dee0ff1 00038 (v01 CORE COREBOOT 00000000 CORE 00000000)
[ 0.000000] ACPI: APIC 000000001dee1029 00074 (v01 CORE COREBOOT 00000000 CORE 00000000)
[ 0.000000] ACPI: MCFG 000000001dee109d 0003C (v01 CORE COREBOOT 00000000 CORE 00000000)
[ 0.000000] ACPI: SRAT 000000001dee10d9 000A0 (v01 CORE COREBOOT 00000000 CORE 00000000)
[ 0.000000] ACPI: SLIT 000000001dee1179 0002D (v01 CORE COREBOOT 00000000 CORE 00000000)
[ 0.000000] ACPI: SSDT 000000001dee11a6 00361 (v02 CORE COREBOOT 0000002A CORE 0000002A)
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] SRAT: PXM 0 -> APIC 0x00 -> Node 0
[ 0.000000] SRAT: PXM 0 -> APIC 0x01 -> Node 0
[ 0.000000] SRAT: Node 0 PXM 0 [mem 0x00000000-0x0009ffff]
[ 0.000000] SRAT: Node 0 PXM 0 [mem 0x00100000-0x1fffffff]
[ 0.000000] NUMA: Initialized distance table, cnt=1
[ 0.000000] NUMA: Node 0 [mem 0x00000000-0x0009ffff] + [mem 0x00100000-0x1dedffff] -> [mem 0x00000000-0x1dedffff]
[ 0.000000] Initmem setup node 0 [mem 0x00000000-0x1dedffff]
[ 0.000000] NODE_DATA [mem 0x1ded9000-0x1dedcfff]
[ 0.000000] [ffffea0000000000-ffffea00007fffff] PMD -> [ffff88001bc00000-ffff88001c3fffff] on node 0
[ 0.000000] Zone ranges:
[ 0.000000] DMA [mem 0x00010000-0x00ffffff]
[ 0.000000] DMA32 [mem 0x01000000-0xffffffff]
[ 0.000000] Normal empty
[ 0.000000] Movable zone start for each node
[ 0.000000] Early memory node ranges
[ 0.000000] node 0: [mem 0x00010000-0x0009efff]
[ 0.000000] node 0: [mem 0x00100000-0x1dedffff]
[ 0.000000] On node 0 totalpages: 122479
[ 0.000000] DMA zone: 64 pages used for memmap
[ 0.000000] DMA zone: 6 pages reserved
[ 0.000000] DMA zone: 3913 pages, LIFO batch:0
[ 0.000000] DMA32 zone: 1852 pages used for memmap
[ 0.000000] DMA32 zone: 116644 pages, LIFO batch:31
[ 0.000000] ACPI: PM-Timer IO Port: 0x508
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled)
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
[ 0.000000] ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
[ 0.000000] IOAPIC[0]: apic_id 2, version 3, address 0xfec00000, GSI 0-23
[ 0.000000] ACPI: IOAPIC (id[0x03] address[0xfecc0000] gsi_base[24])
[ 0.000000] IOAPIC[1]: apic_id 3, version 3, address 0xfecc0000, GSI 24-47
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 low level)
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[ 0.000000] ACPI: IRQ0 used by override.
[ 0.000000] ACPI: IRQ2 used by override.
[ 0.000000] ACPI: IRQ9 used by override.
[ 0.000000] Using ACPI (MADT) for SMP configuration information
[ 0.000000] ACPI: HPET id: 0x11068201 base: 0xfed00000
[ 0.000000] SMP: Allowing 2 CPUs, 0 hotplug CPUs
[ 0.000000] nr_irqs_gsi: 64
[ 0.000000] PM: Registered nosave memory: 000000000009f000 - 00000000000a0000
[ 0.000000] PM: Registered nosave memory: 00000000000a0000 - 00000000000f0000
[ 0.000000] PM: Registered nosave memory: 00000000000f0000 - 0000000000100000
[ 0.000000] e820: [mem 0x20000000-0xdfffffff] available for PCI devices
[ 0.000000] Booting paravirtualized kernel on bare hardware
[ 0.000000] setup_percpu: NR_CPUS:256 nr_cpumask_bits:256 nr_cpu_ids:2 nr_node_ids:1
[ 0.000000] PERCPU: Embedded 28 pages/cpu @ffff88001dc00000 s83584 r8192 d22912 u1048576
[ 0.000000] pcpu-alloc: s83584 r8192 d22912 u1048576 alloc=1*2097152
[ 0.000000] pcpu-alloc: [0] 0 1
[ 0.000000] Built 1 zonelists in Node order, mobility grouping on. Total pages: 120557
[ 0.000000] Policy zone: DMA32
[ 0.000000] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-3.5.0-17-generic root=UUID=4fcc9a5d-b1f6-4986-9caf-7a7651ac83f2 ro recovery nomodeset
[ 0.000000] PID hash table entries: 2048 (order: 2, 16384 bytes)
[ 0.000000] __ex_table already sorted, skipping sort
[ 0.000000] Checking aperture...
[ 0.000000] AGP bridge at 00:00:00
[ 0.000000] Aperture from AGP @ c0000000 old size 32 MB
[ 0.000000] Aperture from AGP @ c0000000 size 256 MB (APSIZE f00)
[ 0.000000] Node 0: aperture @ f4000000 size 64 MB
[ 0.000000] Memory: 450804k/490368k available (6711k kernel code, 452k absent, 39112k reserved, 6459k data, 928k init)
[ 0.000000] SLUB: Genslabs=15, HWalign=64, Order=0-3, MinObjects=0, CPUs=2, Nodes=1
[ 0.000000] Hierarchical RCU implementation.
[ 0.000000] RCU dyntick-idle grace-period acceleration is enabled.
[ 0.000000] NR_IRQS:16640 nr_irqs:512 16
[ 0.000000] Extended CMOS year: 2000
[ 0.000000] spurious 8259A interrupt: IRQ7.
[ 0.000000] Console: colour VGA+ 80x25
[ 0.000000] console [tty0] enabled
[ 0.000000] allocated 2097152 bytes of page_cgroup
[ 0.000000] please try 'cgroup_disable=memory' option if you don't want memory cgroups
[ 0.000000] hpet clockevent registered
[ 0.000000] Fast TSC calibration using PIT
[ 0.000000] Detected 2100.210 MHz processor.
[ 0.000000] Marking TSC unstable due to TSCs unsynchronized
[ 0.004068] Calibrating delay loop (skipped), value calculated using timer frequency.. 4200.42 BogoMIPS (lpj=8400840)
[ 0.004195] pid_max: default: 32768 minimum: 301
[ 0.004289] Security Framework initialized
[ 0.004371] AppArmor: AppArmor initialized
[ 0.004432] Yama: becoming mindful.
[ 0.004600] Dentry cache hash table entries: 65536 (order: 7, 524288 bytes)
[ 0.005046] Inode-cache hash table entries: 32768 (order: 6, 262144 bytes)
[ 0.005315] Mount-cache hash table entries: 256
[ 0.005653] Initializing cgroup subsys cpuacct
[ 0.005718] Initializing cgroup subsys memory
[ 0.005792] Initializing cgroup subsys devices
[ 0.005854] Initializing cgroup subsys freezer
[ 0.005916] Initializing cgroup subsys blkio
[ 0.005978] Initializing cgroup subsys perf_event
[ 0.006074] tseg: 0000000000
[ 0.006093] CPU: Physical Processor ID: 0
[ 0.006154] CPU: Processor Core ID: 0
[ 0.006215] mce: CPU supports 5 MCE banks
[ 0.006287] LVT offset 0 assigned for vector 0xf9
[ 0.006353] using AMD E400 aware idle routine
[ 0.009929] ACPI: Core revision 20120320
[ 0.010428] ftrace: allocating 25118 entries in 99 pages
[ 0.021349] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=0 pin2=0
[ 0.063593] CPU0: AMD Athlon(tm) 64 X2 Dual Core Processor 4000+ stepping 01
[ 0.064003] Performance Events: AMD PMU driver.
[ 0.064003] ... version: 0
[ 0.064003] ... bit width: 48
[ 0.064003] ... generic registers: 4
[ 0.064003] ... value mask: 0000ffffffffffff
[ 0.064003] ... max period: 00007fffffffffff
[ 0.064003] ... fixed-purpose events: 0
[ 0.064003] ... event mask: 000000000000000f
[ 0.064003] NMI watchdog: enabled on all CPUs, permanently consumes one hw-PMU counter.
[ 0.064003] Booting Node 0, Processors #1 Ok.
[ 0.152135] Brought up 2 CPUs
[ 0.152196] Total of 2 processors activated (8400.57 BogoMIPS).
[ 0.153066] devtmpfs: initialized
[ 0.153843] EVM: security.selinux
[ 0.153904] EVM: security.SMACK64
[ 0.153963] EVM: security.capability
[ 0.156476] dummy:
[ 0.156589] RTC time: 21:19:12, date: 01/03/14
[ 0.156701] NET: Registered protocol family 16
[ 0.156779] Trying to unpack rootfs image as initramfs...
[ 0.156932] node 0 link 0: io port [1000, 1fff]
[ 0.156935] TOM: 0000000020000000 aka 512M
[ 0.156938] node 0 link 0: mmio [a0000, bffff]
[ 0.156940] node 0 link 0: mmio [e0000000, f12fffff]
[ 0.156942] node 0 link 0: mmio [c0000000, dfffffff]
[ 0.156944] bus: [00, 05] on node 0 link 0
[ 0.156946] bus: 00 [io 0x0000-0xffff]
[ 0.156947] bus: 00 [mem 0x000a0000-0x000bffff]
[ 0.156948] bus: 00 [mem 0x20000000-0xfcffffffff]
[ 0.157169] ACPI FADT declares the system doesn't support MSI, so disable it
[ 0.157236] ACPI: bus type pci registered
[ 0.157358] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
[ 0.157436] PCI: MMCONFIG at [mem 0xe0000000-0xefffffff] reserved in E820
[ 0.165980] PCI: Using configuration type 1 for base access
[ 0.172136] bio: create slab <bio-0> at 0
[ 0.172332] ACPI: Added _OSI(Module Device)
[ 0.172394] ACPI: Added _OSI(Processor Device)
[ 0.172456] ACPI: Added _OSI(3.0 _SCP Extensions)
[ 0.172518] ACPI: Added _OSI(Processor Aggregator Device)
[ 0.172773] ACPI: EC: Look up EC in DSDT
[ 0.173554] ACPI: Interpreter enabled
[ 0.173618] ACPI: (supports S0 S3 S5)
[ 0.173831] ACPI: Using IOAPIC for interrupt routing
[ 0.174553] ACPI: No dock devices found.
[ 0.174618] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
[ 0.176230] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-05])
[ 0.178839] pci_root PNP0A03:00: >host bridge window [io 0x03b0-0x03df]
[ 0.178905] pci_root PNP0A03:00: >host bridge window [io 0x0d00-0x1fff]
[ 0.178970] pci_root PNP0A03:00: >host bridge window [mem 0xc0000000-0xdfffffff]
[ 0.179045] pci_root PNP0A03:00: >host bridge window [mem 0xe0000000-0xf12fffff]
[ 0.179120] pci_root PNP0A03:00: >host bridge window [mem 0x000a0000-0x000bffff]
[ 0.179195] pci_root PNP0A03:00: >host bridge window [io 0x0000-0x0cf7]
[ 0.179262] pci_root PNP0A03:00: >host bridge window expanded to [io 0x0000-0x0cf7]; [io 0x0000-0x0cf7] ignored
[ 0.179374] PCI host bridge to bus 0000:00
[ 0.179437] pci_bus 0000:00: >root bus resource [io 0x0000-0x0cf7]
[ 0.179501] pci_bus 0000:00: >root bus resource [io 0x0d00-0x1fff]
[ 0.179566] pci_bus 0000:00: >root bus resource [mem 0xc0000000-0xdfffffff]
[ 0.179632] pci_bus 0000:00: >root bus resource [mem 0xe0000000-0xf12fffff]
[ 0.180022] pci_bus 0000:00: >root bus resource [mem 0x000a0000-0x000bffff]
[ 0.180110] pci 0000:00:00.0: >[1106:0336] type 00 class 0x060000
[ 0.180124] pci 0000:00:00.0: >reg 10: [mem 0xc0000000-0xcfffffff pref]
[ 0.180232] pci 0000:00:00.1: >[1106:1336] type 00 class 0x060000
[ 0.180286] pci 0000:00:00.2: >[1106:2336] type 00 class 0x060000
[ 0.180340] pci 0000:00:00.3: >[1106:3336] type 00 class 0x060000
[ 0.180393] pci 0000:00:00.4: >[1106:4336] type 00 class 0x060000
[ 0.180446] pci 0000:00:00.5: >[1106:5336] type 00 class 0x080020
[ 0.180522] pci 0000:00:00.6: >[1106:6290] type 00 class 0x060000
[ 0.180576] pci 0000:00:00.7: >[1106:7336] type 00 class 0x060000
[ 0.180636] pci 0000:00:01.0: >[1106:b188] type 01 class 0x060400
[ 0.180703] pci 0000:00:02.0: >[1106:a238] type 01 class 0x060400
[ 0.180789] pci 0000:00:02.0: >PME# supported from D0 D3hot D3cold
[ 0.180822] pci 0000:00:03.0: >[1106:c238] type 01 class 0x060400
[ 0.180907] pci 0000:00:03.0: >PME# supported from D0 D3hot D3cold
[ 0.180951] pci 0000:00:0f.0: >[1106:5372] type 00 class 0x01018f
[ 0.180968] pci 0000:00:0f.0: >reg 10: [io 0x18a0-0x18a7]
[ 0.180978] pci 0000:00:0f.0: >reg 14: [io 0x18b0-0x18b3]
[ 0.180988] pci 0000:00:0f.0: >reg 18: [io 0x18a8-0x18af]
[ 0.180998] pci 0000:00:0f.0: >reg 1c: [io 0x18b4-0x18b7]
[ 0.181008] pci 0000:00:0f.0: >reg 20: [io 0x1880-0x188f]
[ 0.181018] pci 0000:00:0f.0: >reg 24: [io 0x1000-0x10ff]
[ 0.181072] pci 0000:00:0f.1: >[1106:0571] type 00 class 0x01018a
[ 0.181117] pci 0000:00:0f.1: >reg 20: [io 0x1890-0x189f]
[ 0.181185] pci 0000:00:10.0: >[1106:3038] type 00 class 0x0c0300
[ 0.181229] pci 0000:00:10.0: >reg 20: [io 0x1800-0x181f]
[ 0.181269] pci 0000:00:10.0: >supports D1 D2
[ 0.181272] pci 0000:00:10.0: >PME# supported from D0 D1 D2 D3hot D3cold
[ 0.181292] pci 0000:00:10.1: >[1106:3038] type 00 class 0x0c0300
[ 0.181336] pci 0000:00:10.1: >reg 20: [io 0x1820-0x183f]
[ 0.181377] pci 0000:00:10.1: >supports D1 D2
[ 0.181379] pci 0000:00:10.1: >PME# supported from D0 D1 D2 D3hot D3cold
[ 0.181400] pci 0000:00:10.2: >[1106:3038] type 00 class 0x0c0300
[ 0.181444] pci 0000:00:10.2: >reg 20: [io 0x1840-0x185f]
[ 0.181485] pci 0000:00:10.2: >supports D1 D2
[ 0.181487] pci 0000:00:10.2: >PME# supported from D0 D1 D2 D3hot D3cold
[ 0.181510] pci 0000:00:10.3: >[1106:3038] type 00 class 0x0c0300
[ 0.181554] pci 0000:00:10.3: >reg 20: [io 0x1860-0x187f]
[ 0.181595] pci 0000:00:10.3: >supports D1 D2
[ 0.181598] pci 0000:00:10.3: >PME# supported from D0 D1 D2 D3hot D3cold
[ 0.181620] pci 0000:00:10.4: >[1106:3104] type 00 class 0x0c0320
[ 0.181639] pci 0000:00:10.4: >reg 10: [mem 0xf1200000-0xf12000ff]
[ 0.181716] pci 0000:00:10.4: >supports D1 D2
[ 0.181718] pci 0000:00:10.4: >PME# supported from D0 D1 D2 D3hot D3cold
[ 0.181744] pci 0000:00:11.0: >[1106:3372] type 00 class 0x060100
[ 0.181852] pci 0000:00:11.7: >[1106:287e] type 00 class 0x060000
[ 0.181918] pci 0000:00:12.0: >[1106:3065] type 00 class 0x020000
[ 0.181935] pci 0000:00:12.0: >reg 10: [io 0x1400-0x14ff]
[ 0.181945] pci 0000:00:12.0: >reg 14: [mem 0xf1200100-0xf12001ff]
[ 0.182008] pci 0000:00:12.0: >supports D1 D2
[ 0.182010] pci 0000:00:12.0: >PME# supported from D0 D1 D2 D3hot D3cold
[ 0.182032] pci 0000:00:13.0: >[1106:337b] type 01 class 0x060400
[ 0.182111] pci 0000:00:13.1: >[1106:337a] type 01 class 0x060401
[ 0.182199] pci 0000:00:18.0: >[1022:1100] type 00 class 0x060000
[ 0.182225] pci 0000:00:18.1: >[1022:1101] type 00 class 0x060000
[ 0.182251] pci 0000:00:18.2: >[1022:1102] type 00 class 0x060000
[ 0.182269] pci 0000:00:18.3: >[1022:1103] type 00 class 0x060000
[ 0.182332] pci 0000:01:00.0: >[1106:3230] type 00 class 0x030000
[ 0.182348] pci 0000:01:00.0: >reg 10: [mem 0xd0000000-0xdfffffff pref]
[ 0.182356] pci 0000:01:00.0: >reg 14: [mem 0xf0000000-0xf0ffffff]
[ 0.182386] pci 0000:01:00.0: >reg 30: [mem 0xf1000000-0xf100ffff pref]
[ 0.182414] pci 0000:01:00.0: >supports D1 D2
[ 0.182450] pci 0000:00:01.0: >PCI bridge to [bus 01-01]
[ 0.182517] pci 0000:00:01.0: > bridge window [mem 0xf0000000-0xf10fffff]
[ 0.182522] pci 0000:00:01.0: > bridge window [mem 0xd0000000-0xdfffffff pref]
[ 0.182571] pci 0000:00:02.0: >PCI bridge to [bus 02-02]
[ 0.182690] pci 0000:00:03.0: >PCI bridge to [bus 03-03]
[ 0.182804] pci 0000:04:01.0: >[1106:3288] type 00 class 0x040300
[ 0.182820] pci 0000:04:01.0: >reg 10: [mem 0xf1100000-0xf1103fff 64bit]
[ 0.182886] pci 0000:04:01.0: >PME# supported from D0 D3hot D3cold
[ 0.182899] pci 0000:04:01.0: >disabling ASPM on pre-1.1 PCIe device. You can enable it with 'pcie_aspm=force'
[ 0.183013] pci 0000:00:13.0: >PCI bridge to [bus 04-04]
[ 0.183079] pci 0000:00:13.0: > bridge window [mem 0xf1100000-0xf11fffff]
[ 0.183150] pci 0000:00:13.1: >PCI bridge to [bus 05-05] (subtractive decode)
[ 0.183223] pci 0000:00:13.1: > bridge window [io 0x0000-0x0cf7] (subtractive decode)
[ 0.183226] pci 0000:00:13.1: > bridge window [io 0x0d00-0x1fff] (subtractive decode)
[ 0.183229] pci 0000:00:13.1: > bridge window [mem 0xc0000000-0xdfffffff] (subtractive decode)
[ 0.183231] pci 0000:00:13.1: > bridge window [mem 0xe0000000-0xf12fffff] (subtractive decode)
[ 0.183234] pci 0000:00:13.1: > bridge window [mem 0x000a0000-0x000bffff] (subtractive decode)
[ 0.183260] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
[ 0.183309] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEGG._PRT]
[ 0.183328] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEX0._PRT]
[ 0.183344] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEX1._PRT]
[ 0.183365] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.TBRG._PRT]
[ 0.184023] pci0000:00: >Unable to request _OSC control (_OSC support mask: 0x0f)
[ 0.186996] vgaarb: device added: PCI:0000:01:00.0,decodes=io+mem,owns=io+mem,locks=none
[ 0.187074] vgaarb: loaded
[ 0.187133] vgaarb: bridge control possible 0000:01:00.0
[ 0.187453] SCSI subsystem initialized
[ 0.187609] libata version 3.00 loaded.
[ 0.187646] ACPI: bus type usb registered
[ 0.187742] usbcore: registered new interface driver usbfs
[ 0.187815] usbcore: registered new interface driver hub
[ 0.187914] usbcore: registered new device driver usb
[ 0.188120] PCI: Using ACPI for IRQ routing
[ 0.196646] PCI: pci_cache_line_size set to 64 bytes
[ 0.196778] e820: reserve RAM buffer [mem 0x0009fc00-0x0009ffff]
[ 0.196781] e820: reserve RAM buffer [mem 0x1dee0000-0x1fffffff]
[ 0.196920] NetLabel: Initializing
[ 0.196981] NetLabel: domain hash size = 128
[ 0.197042] NetLabel: protocols = UNLABELED CIPSOv4
[ 0.197121] NetLabel: unlabeled traffic allowed by default
[ 0.197263] HPET: 3 timers in total, 0 timers will be used for per-cpu timer
[ 0.197332] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0
[ 0.197578] hpet0: 3 comparators, 32-bit 14.318180 MHz counter
[ 0.204193] Switching to clocksource hpet
[ 0.214943] AppArmor: AppArmor Filesystem Enabled
[ 0.215055] pnp: PnP ACPI init
[ 0.215140] ACPI: bus type pnp registered
[ 0.216769] pnp 00:00: >[bus 00-05]
[ 0.216774] pnp 00:00: >[io 0x03b0-0x03df window]
[ 0.216777] pnp 00:00: >[io 0x0d00-0x1fff window]
[ 0.216780] pnp 00:00: >[mem 0xc0000000-0xdfffffff window]
[ 0.216782] pnp 00:00: >[mem 0xe0000000-0xf12fffff window]
[ 0.216785] pnp 00:00: >[mem 0x000a0000-0x000bffff window]
[ 0.216788] pnp 00:00: >[io 0x0cf8-0x0cff]
[ 0.216790] pnp 00:00: >[io 0x0000-0x0cf7 window]
[ 0.216836] pnp 00:00: >Plug and Play ACPI device, IDs PNP0a03 (active)
[ 0.216872] pnp 00:01: >[io 0x0060]
[ 0.216875] pnp 00:01: >[io 0x0064]
[ 0.216891] pnp 00:01: >[irq 1]
[ 0.216921] pnp 00:01: >Plug and Play ACPI device, IDs PNP0303 (active)
[ 0.216952] pnp 00:02: >[irq 12]
[ 0.216976] pnp 00:02: >Plug and Play ACPI device, IDs PNP0f13 (active)
[ 0.217002] pnp 00:03: >[io 0x03f2-0x03f5]
[ 0.217005] pnp 00:03: >[io 0x03f7]
[ 0.217012] pnp 00:03: >[irq 6]
[ 0.217014] pnp 00:03: >[dma 2]
[ 0.217043] pnp 00:03: >Plug and Play ACPI device, IDs PNP0700 (active)
[ 0.217056] pnp 00:04: >[mem 0x1e000000-0x1fffffff]
[ 0.217059] pnp 00:04: >[mem 0xfec00000-0xfec000ff]
[ 0.217061] pnp 00:04: >[mem 0xff000000-0xffffffff]
[ 0.217064] pnp 00:04: >[mem 0xfecc0000-0xfecc00ff]
[ 0.217066] pnp 00:04: >[mem 0xe0000000-0xefffffff]
[ 0.217069] pnp 00:04: >[io 0x0500-0x057f]
[ 0.217071] pnp 00:04: >[io 0x04d0-0x04d1]
[ 0.217073] pnp 00:04: >[io 0x0400-0x040f]
[ 0.217162] system 00:04: >[io 0x0500-0x057f] has been reserved
[ 0.217228] system 00:04: >[io 0x04d0-0x04d1] has been reserved
[ 0.217292] system 00:04: >[io 0x0400-0x040f] has been reserved
[ 0.217358] system 00:04: >[mem 0x1e000000-0x1fffffff] has been reserved
[ 0.217424] system 00:04: >[mem 0xfec00000-0xfec000ff] could not be reserved
[ 0.217490] system 00:04: >[mem 0xff000000-0xffffffff] has been reserved
[ 0.217556] system 00:04: >[mem 0xfecc0000-0xfecc00ff] could not be reserved
[ 0.217622] system 00:04: >[mem 0xe0000000-0xefffffff] has been reserved
[ 0.217689] system 00:04: >Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.217694] pnp: PnP ACPI: found 5 devices
[ 0.217754] ACPI: ACPI bus type pnp unregistered
[ 0.224334] pci 0000:00:02.0: >bridge window [io 0x1000-0x0fff] to [bus 02-02] add_size 1000
[ 0.224343] pci 0000:00:02.0: >bridge window [mem 0x00100000-0x000fffff 64bit pref] to [bus 02-02] add_size 200000
[ 0.224346] pci 0000:00:02.0: >bridge window [mem 0x00100000-0x000fffff] to [bus 02-02] add_size 200000
[ 0.224357] pci 0000:00:03.0: >bridge window [io 0x1000-0x0fff] to [bus 03-03] add_size 1000
[ 0.224360] pci 0000:00:03.0: >bridge window [mem 0x00100000-0x000fffff 64bit pref] to [bus 03-03] add_size 200000
[ 0.224364] pci 0000:00:03.0: >bridge window [mem 0x00100000-0x000fffff] to [bus 03-03] add_size 200000
[ 0.224390] pci 0000:00:02.0: >res[14]=[mem 0x00100000-0x000fffff] get_res_add_size add_size 200000
[ 0.224393] pci 0000:00:02.0: >res[15]=[mem 0x00100000-0x000fffff 64bit pref] get_res_add_size add_size 200000
[ 0.224396] pci 0000:00:03.0: >res[14]=[mem 0x00100000-0x000fffff] get_res_add_size add_size 200000
[ 0.224399] pci 0000:00:03.0: >res[15]=[mem 0x00100000-0x000fffff 64bit pref] get_res_add_size add_size 200000
[ 0.224403] pci 0000:00:02.0: >res[13]=[io 0x1000-0x0fff] get_res_add_size add_size 1000
[ 0.224406] pci 0000:00:03.0: >res[13]=[io 0x1000-0x0fff] get_res_add_size add_size 1000
[ 0.224413] pci 0000:00:02.0: >BAR 14: can't assign mem (size 0x200000)
[ 0.224481] pci 0000:00:02.0: >BAR 15: can't assign mem pref (size 0x200000)
[ 0.224548] pci 0000:00:03.0: >BAR 14: can't assign mem (size 0x200000)
[ 0.224613] pci 0000:00:03.0: >BAR 15: can't assign mem pref (size 0x200000)
[ 0.224681] pci 0000:00:02.0: >BAR 13: can't assign io (size 0x1000)
[ 0.224747] pci 0000:00:03.0: >BAR 13: can't assign io (size 0x1000)
[ 0.224813] pci 0000:00:01.0: >PCI bridge to [bus 01-01]
[ 0.224880] pci 0000:00:01.0: > bridge window [mem 0xf0000000-0xf10fffff]
[ 0.224947] pci 0000:00:01.0: > bridge window [mem 0xd0000000-0xdfffffff pref]
[ 0.225026] pci 0000:00:02.0: >PCI bridge to [bus 02-02]
[ 0.225098] pci 0000:00:03.0: >PCI bridge to [bus 03-03]
[ 0.225172] pci 0000:00:13.0: >PCI bridge to [bus 04-04]
[ 0.225237] pci 0000:00:13.0: > bridge window [mem 0xf1100000-0xf11fffff]
[ 0.225308] pci 0000:00:13.1: >PCI bridge to [bus 05-05]
[ 0.225388] pci 0000:00:01.0: >setting latency timer to 64
[ 0.225431] pci 0000:00:13.0: >setting latency timer to 64
[ 0.225438] pci 0000:00:13.1: >setting latency timer to 64
[ 0.225443] pci_bus 0000:00: >resource 4 [io 0x0000-0x0cf7]
[ 0.225446] pci_bus 0000:00: >resource 5 [io 0x0d00-0x1fff]
[ 0.225448] pci_bus 0000:00: >resource 6 [mem 0xc0000000-0xdfffffff]
[ 0.225451] pci_bus 0000:00: >resource 7 [mem 0xe0000000-0xf12fffff]
[ 0.225454] pci_bus 0000:00: >resource 8 [mem 0x000a0000-0x000bffff]
[ 0.225457] pci_bus 0000:01: >resource 1 [mem 0xf0000000-0xf10fffff]
[ 0.225460] pci_bus 0000:01: >resource 2 [mem 0xd0000000-0xdfffffff pref]
[ 0.225463] pci_bus 0000:04: >resource 1 [mem 0xf1100000-0xf11fffff]
[ 0.225466] pci_bus 0000:05: >resource 4 [io 0x0000-0x0cf7]
[ 0.225469] pci_bus 0000:05: >resource 5 [io 0x0d00-0x1fff]
[ 0.225471] pci_bus 0000:05: >resource 6 [mem 0xc0000000-0xdfffffff]
[ 0.225474] pci_bus 0000:05: >resource 7 [mem 0xe0000000-0xf12fffff]
[ 0.225477] pci_bus 0000:05: >resource 8 [mem 0x000a0000-0x000bffff]
[ 0.225532] NET: Registered protocol family 2
[ 0.225679] IP route cache hash table entries: 4096 (order: 3, 32768 bytes)
[ 0.225921] TCP established hash table entries: 16384 (order: 6, 262144 bytes)
[ 0.226205] TCP bind hash table entries: 16384 (order: 6, 262144 bytes)
[ 0.226438] TCP: Hash tables configured (established 16384 bind 16384)
[ 0.226503] TCP: reno registered
[ 0.226567] UDP hash table entries: 256 (order: 1, 8192 bytes)
[ 0.226637] UDP-Lite hash table entries: 256 (order: 1, 8192 bytes)
[ 0.226792] NET: Registered protocol family 1
[ 0.226874] pci 0000:00:00.0: >MSI quirk detected; MSI disabled
[ 0.226968] pci 0000:00:01.0: >disabling DAC on VIA PCI bridge
[ 0.227035] pci 0000:00:02.0: >MSI quirk detected; subordinate MSI disabled
[ 0.227313] pci 0000:01:00.0: >Boot video device
[ 0.227321] PCI: CLS 64 bytes, default 64
[ 0.227373] agpgart-amd64 0000:00:00.0: >AGP bridge [1106/0336]
[ 0.227444] agpgart-amd64 0000:00:00.0: >aperture from AGP @ c0000000 size 256 MB
[ 0.239416] agpgart-amd64 0000:00:00.0: >AGP aperture is 256M @ 0xc0000000
[ 0.239601] platform rtc_cmos: >registered platform RTC device (no PNP device found)
[ 0.240065] audit: initializing netlink socket (disabled)
[ 0.240143] type=2000 audit(1388783952.236:1): initialized
[ 0.266352] HugeTLB registered 2 MB page size, pre-allocated 0 pages
[ 0.268311] VFS: Disk quotas dquot_6.5.2
[ 0.268431] Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[ 0.269163] fuse init (API version 7.19)
[ 0.269321] msgmni has been set to 880
[ 0.269817] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252)
[ 0.269925] io scheduler noop registered
[ 0.269986] io scheduler deadline registered (default)
[ 0.270085] io scheduler cfq registered
[ 0.270551] ioapic: probe of 0000:00:00.5 failed with error -22
[ 0.270625] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[ 0.270710] pciehp: PCI Express Hot Plug Controller Driver version: 0.4
[ 0.270924] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input0
[ 0.271005] ACPI: Power Button [PWRF]
[ 0.271650] GHES: HEST is not enabled!
[ 0.271802] Serial: 8250/16550 driver, 32 ports, IRQ sharing enabled
[ 0.292264] serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[ 0.293621] Linux agpgart interface v0.103
[ 0.295352] brd: module loaded
[ 0.296309] loop: module loaded
[ 0.297128] Fixed MDIO Bus: probed
[ 0.297247] tun: Universal TUN/TAP device driver, 1.6
[ 0.297309] tun: (C) 1999-2004 Max Krasnyansky <maxk@qualcomm.com>
[ 0.297425] PPP generic driver version 2.4.2
[ 0.297544] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 0.297657] ehci_hcd 0000:00:10.4: >EHCI Host Controller
[ 0.297728] ehci_hcd 0000:00:10.4: >new USB bus registered, assigned bus number 1
[ 0.297839] ehci_hcd 0000:00:10.4: >debug port 1
[ 0.297949] ehci_hcd 0000:00:10.4: >irq 21, io mem 0xf1200000
[ 0.308030] ehci_hcd 0000:00:10.4: >USB 2.0 started, EHCI 1.00
[ 0.308126] usb usb1: >New USB device found, idVendor=1d6b, idProduct=0002
[ 0.308192] usb usb1: >New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 0.308267] usb usb1: >Product: EHCI Host Controller
[ 0.308330] usb usb1: >Manufacturer: Linux 3.5.0-17-generic ehci_hcd
[ 0.308395] usb usb1: >SerialNumber: 0000:00:10.4
[ 0.308589] hub 1-0:1.0: >USB hub found
[ 0.308661] hub 1-0:1.0: >8 ports detected
[ 0.308847] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[ 0.308931] uhci_hcd: USB Universal Host Controller Interface driver
[ 0.309024] uhci_hcd 0000:00:10.0: >UHCI Host Controller
[ 0.309093] uhci_hcd 0000:00:10.0: >new USB bus registered, assigned bus number 2
[ 0.309215] uhci_hcd 0000:00:10.0: >irq 20, io base 0x00001800
[ 0.309324] usb usb2: >New USB device found, idVendor=1d6b, idProduct=0001
[ 0.309390] usb usb2: >New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 0.309465] usb usb2: >Product: UHCI Host Controller
[ 0.309528] usb usb2: >Manufacturer: Linux 3.5.0-17-generic uhci_hcd
[ 0.309592] usb usb2: >SerialNumber: 0000:00:10.0
[ 0.309768] hub 2-0:1.0: >USB hub found
[ 0.309833] hub 2-0:1.0: >2 ports detected
[ 0.309993] uhci_hcd 0000:00:10.1: >UHCI Host Controller
[ 0.310061] uhci_hcd 0000:00:10.1: >new USB bus registered, assigned bus number 3
[ 0.310183] uhci_hcd 0000:00:10.1: >irq 22, io base 0x00001820
[ 0.310291] usb usb3: >New USB device found, idVendor=1d6b, idProduct=0001
[ 0.310357] usb usb3: >New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 0.310432] usb usb3: >Product: UHCI Host Controller
[ 0.310494] usb usb3: >Manufacturer: Linux 3.5.0-17-generic uhci_hcd
[ 0.310559] usb usb3: >SerialNumber: 0000:00:10.1
[ 0.310728] hub 3-0:1.0: >USB hub found
[ 0.310793] hub 3-0:1.0: >2 ports detected
[ 0.310942] uhci_hcd 0000:00:10.2: >UHCI Host Controller
[ 0.311012] uhci_hcd 0000:00:10.2: >new USB bus registered, assigned bus number 4
[ 0.311110] uhci_hcd 0000:00:10.2: >irq 21, io base 0x00001840
[ 0.311220] usb usb4: >New USB device found, idVendor=1d6b, idProduct=0001
[ 0.311285] usb usb4: >New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 0.311360] usb usb4: >Product: UHCI Host Controller
[ 0.311423] usb usb4: >Manufacturer: Linux 3.5.0-17-generic uhci_hcd
[ 0.311487] usb usb4: >SerialNumber: 0000:00:10.2
[ 0.311646] hub 4-0:1.0: >USB hub found
[ 0.311710] hub 4-0:1.0: >2 ports detected
[ 0.311866] uhci_hcd 0000:00:10.3: >UHCI Host Controller
[ 0.311934] uhci_hcd 0000:00:10.3: >new USB bus registered, assigned bus number 5
[ 0.312085] uhci_hcd 0000:00:10.3: >irq 23, io base 0x00001860
[ 0.312189] usb usb5: >New USB device found, idVendor=1d6b, idProduct=0001
[ 0.312255] usb usb5: >New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 0.312329] usb usb5: >Product: UHCI Host Controller
[ 0.312392] usb usb5: >Manufacturer: Linux 3.5.0-17-generic uhci_hcd
[ 0.312457] usb usb5: >SerialNumber: 0000:00:10.3
[ 0.312618] hub 5-0:1.0: >USB hub found
[ 0.312683] hub 5-0:1.0: >2 ports detected
[ 0.312903] usbcore: registered new interface driver libusual
[ 0.313002] i8042: PNP: PS/2 Controller [PNP0303:KBD,PNP0f13:MOU] at 0x60,0x64 irq 1,12
[ 0.313600] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 0.313669] serio: i8042 AUX port at 0x60,0x64 irq 12
[ 0.313859] mousedev: PS/2 mouse device common for all mice
[ 0.314035] rtc_cmos rtc_cmos: >RTC can wake from S4
[ 0.314289] rtc_cmos rtc_cmos: >rtc core: registered rtc_cmos as rtc0
[ 0.314407] rtc0: alarms up to one year, y3k, 114 bytes nvram, hpet irqs
[ 0.314569] device-mapper: uevent: version 1.0.3
[ 0.314700] device-mapper: ioctl: 4.22.0-ioctl (2011-10-19) initialised: dm-devel@redhat.com
[ 0.315704] cpuidle: using governor ladder
[ 0.315765] cpuidle: using governor menu
[ 0.315826] EFI Variables Facility v0.08 2004-May-17
[ 0.316187] ashmem: initialized
[ 0.316394] TCP: cubic registered
[ 0.316573] NET: Registered protocol family 10
[ 0.316895] NET: Registered protocol family 17
[ 0.316976] Key type dns_resolver registered
[ 0.317205] PM: Hibernation image not present or could not be loaded.
[ 0.317224] registered taskstats version 1
[ 0.339773] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input1
[ 0.501133] Freeing initrd memory: 14876k freed
[ 0.514266] Key type trusted registered
[ 0.517562] Key type encrypted registered
[ 0.521235] Magic number: 14:691:347
[ 0.521374] pci0000:00: >hash matches
[ 0.521499] rtc_cmos rtc_cmos: >setting system clock to 2014-01-03 21:19:12 UTC (1388783952)
[ 0.521653] powernow-k8: Found 1 AMD Athlon(tm) 64 X2 Dual Core Processor 4000+ (2 cpu cores) (version 2.20.00)
[ 0.521803] powernow-k8: fid 0xd (2100 MHz), vid 0xa
[ 0.521866] powernow-k8: fid 0xc (2000 MHz), vid 0xc
[ 0.521928] powernow-k8: fid 0x2 (1000 MHz), vid 0x12
[ 0.522040] powernow-k8: ph2 null fid transition 0xd
[ 0.522154] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found
[ 0.522218] EDD information not available.
[ 0.524226] Freeing unused kernel memory: 928k freed
[ 0.524861] Write protecting the kernel read-only data: 12288k
[ 0.530505] Freeing unused kernel memory: 1472k freed
[ 0.535711] Freeing unused kernel memory: 1124k freed
[ 0.565369] udevd[86]: starting version 175
[ 0.624641] sata_via 0000:00:0f.0: >version 2.6
[ 0.624703] sata_via 0000:00:0f.0: >routed to hard irq line 0
[ 0.627804] scsi0 : sata_via
[ 0.629887] scsi1 : sata_via
[ 0.630048] ata1: SATA max UDMA/133 cmd 0x18a0 ctl 0x18b0 bmdma 0x1880 irq 21
[ 0.630114] ata2: SATA max UDMA/133 cmd 0x18a8 ctl 0x18b4 bmdma 0x1888 irq 21
[ 0.654947] via_rhine: v1.10-LK1.5.0 2010-10-09 Written by Donald Becker
[ 0.661924] pata_via 0000:00:0f.1: >version 0.3.4
[ 0.664123] scsi2 : pata_via
[ 0.664650] scsi3 : pata_via
[ 0.664779] ata3: PATA max UDMA/133 cmd 0x1f0 ctl 0x3f6 bmdma 0x1890 irq 14
[ 0.664846] ata4: PATA max UDMA/133 cmd 0x170 ctl 0x376 bmdma 0x1898 irq 15
[ 0.665295] via-rhine 0000:00:12.0: >eth0: VIA Rhine II at 0xf1200100, 00:00:de:ad:be:ef, IRQ 23
[ 0.666154] via-rhine 0000:00:12.0: >eth0: MII PHY found at address 1, status 0x796d advertising 0de1 Link c5e1
[ 0.682745] Floppy drive(s): fd0 is 1.44M
[ 0.700040] FDC 0 is a post-1991 82077
[ 0.832024] ata1: SATA link down 1.5 Gbps (SStatus 0 SControl 300)
[ 1.044020] ata2: SATA link up 1.5 Gbps (SStatus 123 SControl 300)
[ 1.229274] ata2.00: ATA-8: WDC WD1600AAJS-00B4A0, 01.03A01, max UDMA/133
[ 1.229340] ata2.00: 312581808 sectors, multi 0: LBA48 NCQ (depth 0/32)
[ 1.237144] ata2.00: configured for UDMA/133
[ 1.237413] scsi 1:0:0:0: >Direct-Access ATA WDC WD1600AAJS-0 01.0 PQ: 0 ANSI: 5
[ 1.237703] sd 1:0:0:0: >[sda] 312581808 512-byte logical blocks: (160 GB/149 GiB)
[ 1.237746] sd 1:0:0:0: >Attached scsi generic sg0 type 0
[ 1.237893] sd 1:0:0:0: >[sda] Write Protect is off
[ 1.237966] sd 1:0:0:0: >[sda] Mode Sense: 00 3a 00 00
[ 1.238004] sd 1:0:0:0: >[sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 1.294221] sda: sda1 sda2 < sda5 sda6 sda7 sda8 >
[ 1.294859] sd 1:0:0:0: >[sda] Attached SCSI disk
[ 1.908782] EXT4-fs (sda7): INFO: recovery required on readonly filesystem
[ 1.908858] EXT4-fs (sda7): write access will be enabled during recovery
[ 2.273419] EXT4-fs (sda7): recovery complete
[ 2.280667] EXT4-fs (sda7): mounted filesystem with ordered data mode. Opts: (null)
[ 3.652333] udevd[300]: starting version 175
[ 4.695084] microcode: AMD CPU family 0xf not supported
[ 4.746637] k8temp 0000:00:18.3: >Temperature readouts might be wrong - check erratum #141
[ 4.785332] MCE: In-kernel MCE decoding enabled.
[ 4.835172] EDAC MC: Ver: 2.1.0
[ 4.840657] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[ 4.850627] AMD64 EDAC driver v3.4.0
[ 4.850770] EDAC amd64: DRAM ECC disabled.
[ 4.850851] EDAC amd64: ECC disabled in the BIOS or no ECC capability, module will not load.
[ 4.850851] Either enable ECC checking or force module loading by setting 'ecc_enable_override'.
[ 4.850851] (Note that use of the override may cause unknown side effects.)
[ 5.055090] kvm: Nested Virtualization enabled
[ 5.220769] IPv6: ADDRCONF(NETDEV_UP): eth1: link is not ready
[ 5.501183] snd_hda_intel 0000:04:01.0: >PCI: Disallowing DAC for device
[ 5.551594] hda_codec: ALC662 rev1: SKU not ready 0x411111f0
[ 5.559404] input: HDA VIA VT82xx Line as /devices/pci0000:00/0000:00:13.0/0000:04:01.0/sound/card0/input2
[ 5.559604] input: HDA VIA VT82xx Front Mic as /devices/pci0000:00/0000:00:13.0/0000:04:01.0/sound/card0/input3
[ 5.559722] input: HDA VIA VT82xx Rear Mic as /devices/pci0000:00/0000:00:13.0/0000:04:01.0/sound/card0/input4
[ 5.559787] input: HDA VIA VT82xx Front Headphone as /devices/pci0000:00/0000:00:13.0/0000:04:01.0/sound/card0/input5
[ 5.559854] input: HDA VIA VT82xx Line Out CLFE as /devices/pci0000:00/0000:00:13.0/0000:04:01.0/sound/card0/input6
[ 5.559917] input: HDA VIA VT82xx Line Out Surround as /devices/pci0000:00/0000:00:13.0/0000:04:01.0/sound/card0/input7
[ 5.560029] input: HDA VIA VT82xx Line Out Front as /devices/pci0000:00/0000:00:13.0/0000:04:01.0/sound/card0/input8
[ 16.820429] it87: Found IT8712F chip at 0x290, revision 8
[ 16.820565] it87 it87.656: >Detected broken BIOS defaults, disabling PWM interface
[ 26.064442] EXT4-fs (sda7): re-mounted. Opts: errors=remount-ro
[ 86.810847] PM: Syncing filesystems ... done.
[ 86.866494] PM: Preparing system for mem sleep
[ 86.868575] Freezing user space processes ... (elapsed 0.01 seconds) done.
[ 86.884038] Freezing remaining freezable tasks ... (elapsed 0.01 seconds) done.
[ 86.900030] PM: Entering mem sleep
[ 86.900044] Suspending console(s) (use no_console_suspend to debug)
[ 86.900418] sd 1:0:0:0: >[sda] Synchronizing SCSI cache
[ 86.901253] sd 1:0:0:0: >[sda] Stopping disk
[ 86.906277] ACPI handle has no context!
[ 86.920020] agpgart-amd64 0000:00:00.0: >Refused to change power state, currently in D0
[ 87.108273] hda-intel: spurious response 0x0:0x0, last cmd=0x1e70700
[ 87.108291] hda-intel: spurious response 0x0:0x0, last cmd=0x1e70700
[ 87.108311] hda-intel: spurious response 0x0:0x0, last cmd=0x1e70700
[ 87.108332] hda-intel: spurious response 0x0:0x0, last cmd=0x1e70700
[ 87.108353] hda-intel: spurious response 0x0:0x0, last cmd=0x1e70700
[ 87.108374] hda-intel: spurious response 0x0:0x0, last cmd=0x1e70700
[ 87.108395] hda-intel: spurious response 0x0:0x0, last cmd=0x1e70700
[ 87.108416] hda-intel: spurious response 0x0:0x0, last cmd=0x1e70700
[ 87.108437] hda-intel: spurious response 0x0:0x0, last cmd=0x1e70700
[ 87.108457] hda-intel: spurious response 0x0:0x0, last cmd=0x1e70700
[ 87.108478] hda-intel: spurious response 0x80051f17:0x0, last cmd=0x1e70700
[ 87.108499] hda-intel: spurious response 0x270300:0x0, last cmd=0x1e70700
[ 87.108520] hda-intel: spurious response 0x270300:0x0, last cmd=0x1e70700
[ 87.108541] hda-intel: spurious response 0x80:0x0, last cmd=0x1e70700
[ 87.108561] hda-intel: spurious response 0x80:0x0, last cmd=0x1e70700
[ 87.108582] hda-intel: spurious response 0x80:0x0, last cmd=0x1e70700
[ 87.108603] hda-intel: spurious response 0x80:0x0, last cmd=0x1e70700
[ 87.108624] hda-intel: spurious response 0x80:0x0, last cmd=0x1e70700
[ 87.108645] hda-intel: spurious response 0x80:0x0, last cmd=0x1e70700
[ 87.108665] hda-intel: spurious response 0x0:0x0, last cmd=0x1e70700
[ 87.108686] hda-intel: spurious response 0x0:0x0, last cmd=0x1e70700
[ 87.108707] hda-intel: spurious response 0x0:0x0, last cmd=0x1e70700
[ 87.108728] hda-intel: spurious response 0x0:0x0, last cmd=0x1e70700
[ 87.108749] hda-intel: spurious response 0x11:0x0, last cmd=0x1e70700
[ 87.108770] hda-intel: spurious response 0x0:0x0, last cmd=0x1e70700
[ 87.108791] hda-intel: spurious response 0x11:0x0, last cmd=0x1e70700
[ 87.108812] hda-intel: spurious response 0x0:0x0, last cmd=0x1e70700
[ 87.108832] hda-intel: spurious response 0x80:0x0, last cmd=0x1e70700
[ 87.108853] hda-intel: spurious response 0x80:0x0, last cmd=0x1e70700
[ 87.108874] hda-intel: spurious response 0x0:0x0, last cmd=0x1e70700
[ 87.108895] hda-intel: spurious response 0x0:0x0, last cmd=0x1e70700
[ 87.108915] hda-intel: spurious response 0x80:0x0, last cmd=0x1e70700
[ 87.108936] hda-intel: spurious response 0x80:0x0, last cmd=0x1e70700
[ 87.108957] hda-intel: spurious response 0x0:0x0, last cmd=0x1e70700
[ 87.108978] hda-intel: spurious response 0x0:0x0, last cmd=0x1e70700
[ 87.108999] hda-intel: spurious response 0x0:0x0, last cmd=0x1e70700
[ 87.109020] hda-intel: spurious response 0x0:0x0, last cmd=0x1e70700
[ 87.109040] hda-intel: spurious response 0x0:0x0, last cmd=0x1e70700
[ 87.109061] hda-intel: spurious response 0x0:0x0, last cmd=0x1e70700
[ 87.109082] hda-intel: spurious response 0x0:0x0, last cmd=0x1e70700
[ 87.109103] hda-intel: spurious response 0x0:0x0, last cmd=0x1e70700
[ 87.109124] hda-intel: spurious response 0x0:0x0, last cmd=0x1e70700
[ 87.109145] hda-intel: spurious response 0x0:0x0, last cmd=0x1e70700
[ 87.109166] hda-intel: spurious response 0x0:0x0, last cmd=0x1e70700
[ 87.109187] hda-intel: spurious response 0x0:0x0, last cmd=0x1e70700
[ 87.109208] hda-intel: spurious response 0x0:0x0, last cmd=0x1e70700
[ 87.109228] hda-intel: spurious response 0x0:0x0, last cmd=0x1e70700
[ 87.109249] hda-intel: spurious response 0x0:0x0, last cmd=0x1e70700
[ 87.109270] hda-intel: spurious response 0x0:0x0, last cmd=0x1e70700
[ 87.109290] hda-intel: spurious response 0x0:0x0, last cmd=0x1e70700
[ 87.109311] hda-intel: spurious response 0x0:0x0, last cmd=0x1e70700
[ 87.109332] hda-intel: spurious response 0x0:0x0, last cmd=0x1e70700
[ 87.109353] hda-intel: spurious response 0x0:0x0, last cmd=0x1e70700
[ 87.109374] hda-intel: spurious response 0x0:0x0, last cmd=0x1e70700
[ 87.109395] hda-intel: spurious response 0x0:0x0, last cmd=0x1e70700
[ 87.109416] hda-intel: spurious response 0x0:0x0, last cmd=0x1e70700
[ 87.109437] hda-intel: spurious response 0x0:0x0, last cmd=0x1e70700
[ 87.109457] hda-intel: spurious response 0x0:0x0, last cmd=0x1e70700
[ 87.109478] hda-intel: spurious response 0x0:0x0, last cmd=0x1e70700
[ 87.212115] ACPI handle has no context!
[ 87.228018] PM: suspend of drv:snd_hda_intel dev:0000:04:01.0 complete after 322.263 msecs
[ 87.228033] PM: suspend of drv:pci dev:0000:00:13.0 complete after 322.203 msecs
[ 87.442939] PM: suspend of drv:sd dev:1:0:0:0 complete after 542.531 msecs
[ 87.442957] PM: suspend of drv:scsi dev:target1:0:0 complete after 542.548 msecs
[ 87.442971] PM: suspend of drv:scsi dev:host1 complete after 542.402 msecs
[ 87.443017] PM: suspend of drv: dev:ata2 complete after 542.436 msecs
[ 87.443061] PM: suspend of drv:sata_via dev:0000:00:0f.0 complete after 536.922 msecs
[ 87.443080] PM: suspend of drv: dev:pci0000:00 complete after 536.842 msecs
[ 87.443094] PM: suspend of devices complete after 542.846 msecs
[ 87.443096] PM: suspend devices took 0.540 seconds
[ 87.443249] PM: late suspend of devices complete after 0.150 msecs
[ 87.536234] PM: noirq suspend of devices complete after 92.982 msecs
[ 87.536354] ACPI: Preparing to enter system sleep state S3
[ 87.536471] PM: Saving platform NVS memory
[ 87.536473] Disabling non-boot CPUs ...
[ 87.640015] CPU 1 is now offline
[ 87.640525] Extended CMOS year: 2000
[ 87.640525] ACPI: Low-level resume complete
[ 87.640525] PM: Restoring platform NVS memory
[ 87.640525] Extended CMOS year: 2000
[ 87.640525] Enabling non-boot CPUs ...
[ 87.640593] powernow-k8: ph2 null fid transition 0xd
[ 87.640740] Booting Node 0 Processor 1 APIC 0x1
[ 87.656098] CPU1 is up
[ 87.656508] ACPI: Waking up from system sleep state S3
[ 87.736675] PM: noirq resume of devices complete after 80.073 msecs
[ 87.736818] PM: early resume of devices complete after 0.049 msecs
[ 87.736911] pci 0000:00:01.0: >setting latency timer to 64
[ 87.736990] usb usb2: >root hub lost power or was reset
[ 87.737023] usb usb3: >root hub lost power or was reset
[ 87.737050] usb usb4: >root hub lost power or was reset
[ 87.737057] usb usb5: >root hub lost power or was reset
[ 87.737109] pci 0000:00:13.0: >setting latency timer to 64
[ 87.737120] pci 0000:00:13.1: >setting latency timer to 64
[ 87.892102] PM: resume of drv:scsi dev:host3 complete after 153.253 msecs
[ 87.892112] PM: resume of drv:scsi_host dev:host3 complete after 153.223 msecs
[ 87.892188] PM: resume of drv:scsi dev:host2 complete after 153.562 msecs
[ 87.892195] PM: resume of drv:scsi_host dev:host2 complete after 153.400 msecs
[ 87.902774] PM: resume of drv:ata_port dev:ata1 complete after 164.912 msecs
[ 87.902796] PM: resume of drv:scsi dev:host0 complete after 164.462 msecs
[ 87.902811] PM: resume of drv:scsi_host dev:host0 complete after 164.456 msecs
[ 87.920475] ata2.00: configured for UDMA/133
[ 87.920502] PM: resume of drv:scsi dev:host1 complete after 182.117 msecs
[ 87.920512] PM: resume of drv:scsi dev:target1:0:0 complete after 181.570 msecs
[ 87.920518] PM: resume of drv:sd dev:1:0:0:0 complete after 181.527 msecs
[ 87.920525] sd 1:0:0:0: >[sda] Starting disk
[ 87.920536] PM: resume of drv:scsi_host dev:host1 complete after 182.109 msecs
[ 87.930067] PM: resume of drv:scsi_device dev:1:0:0:0 complete after 191.023 msecs
[ 87.960037] PM: resume of drv:hub dev:5-0:1.0 complete after 222.026 msecs
[ 87.960046] PM: resume of drv: dev:ep_00 complete after 221.914 msecs
[ 87.960053] PM: resume of drv: dev:ep_00 complete after 222.062 msecs
[ 87.960059] PM: resume of drv: dev:ep_81 complete after 221.971 msecs
[ 87.960062] PM: resume of drv:hub dev:4-0:1.0 complete after 222.085 msecs
[ 87.960066] PM: resume of drv:hub dev:3-0:1.0 complete after 222.136 msecs
[ 87.960071] PM: resume of drv: dev:ep_00 complete after 222.112 msecs
[ 87.960076] PM: resume of drv: dev:ep_81 complete after 222.089 msecs
[ 87.960078] PM: resume of drv:hub dev:2-0:1.0 complete after 222.189 msecs
[ 87.960083] PM: resume of drv: dev:ep_81 complete after 222.142 msecs
[ 87.960088] PM: resume of drv: dev:ep_00 complete after 222.175 msecs
[ 87.960092] PM: resume of drv: dev:ep_81 complete after 222.196 msecs
[ 90.928018]
[ 90.928019] floppy driver state
[ 90.928020] -------------------
[ 90.928035] now=4294915028 last interrupt=4294892471 diff=22557 last called handler=reset_interrupt [floppy]
[ 90.928036] timeout_message=lock fdc
[ 90.928036] last output bytes:
[ 90.928037] 8 80 4294892467
[ 90.928038] 8 80 4294892467
[ 90.928039] 8 80 4294892467
[ 90.928040] 8 80 4294892470
[ 90.928041] 8 80 4294892470
[ 90.928042] 8 80 4294892470
[ 90.928043] 8 80 4294892470
[ 90.928043] e 80 4294892470
[ 90.928044] 13 80 4294892470
[ 90.928045] 0 90 4294892470
[ 90.928046] 1a 90 4294892470
[ 90.928047] 0 90 4294892470
[ 90.928048] 12 90 4294892470
[ 90.928049] 0 90 4294892470
[ 90.928049] 14 90 4294892470
[ 90.928050] 18 80 4294892470
[ 90.928051] 8 80 4294892471
[ 90.928052] 8 80 4294892471
[ 90.928053] 8 80 4294892471
[ 90.928054] 8 80 4294892471
[ 90.928054] last result at 4294892471
[ 90.928055] last redo_fd_request at 4294892471
[ 90.928066] status=0
[ 90.928067] fdc_busy=1
[ 90.928070] do_floppy=reset_interrupt [floppy]
[ 90.928071] cont=ffffffffa0028ec0
[ 90.928071] current_req= (null)
[ 90.928072] command_status=-1
[ 90.928072]
[ 90.928076] floppy0: floppy timeout called
[ 90.928237] PM: resume of devices complete after 3191.414 msecs
[ 90.928400] PM: resume devices took 3.192 seconds
[ 90.928502] PM: Finishing wakeup.
[ 90.928504] Restarting tasks ... done.
[ 212.160232] Program cbmem tried to access /dev/mem between f0000->1f0000.