| [ 0.000000] Initializing cgroup subsys cpuset |
| [ 0.000000] Initializing cgroup subsys cpu |
| [ 0.000000] Initializing cgroup subsys cpuacct |
| [ 0.000000] Linux version 3.16-2-amd64 (debian-kernel@lists.debian.org) (gcc version 4.8.3 (Debian 4.8.3-11) ) #1 SMP Debian 3.16.3-2 (2014-09-20) |
| [ 0.000000] Command line: BOOT_IMAGE=/boot/vmlinuz-3.16-2-amd64 root=UUID=7d4748f5-6bf2-44dd-a78c-7c82355091e1 ro quiet |
| [ 0.000000] e820: BIOS-provided physical RAM map: |
| [ 0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009fbff] usable |
| [ 0.000000] BIOS-e820: [mem 0x000000000009fc00-0x000000000009ffff] reserved |
| [ 0.000000] BIOS-e820: [mem 0x00000000000f0000-0x00000000000fffff] reserved |
| [ 0.000000] BIOS-e820: [mem 0x0000000000100000-0x00000000c7fbdfff] usable |
| [ 0.000000] BIOS-e820: [mem 0x00000000c7fbe000-0x00000000dfffffff] reserved |
| [ 0.000000] BIOS-e820: [mem 0x00000000f8000000-0x00000000f8ffffff] reserved |
| [ 0.000000] BIOS-e820: [mem 0x0000000100000000-0x000000021effffff] usable |
| [ 0.000000] NX (Execute Disable) protection: active |
| [ 0.000000] SMBIOS 2.7 present. |
| [ 0.000000] DMI: ASROCK E350M1/E350M1, BIOS 4.0-7022-g0e64617 10/15/2014 |
| [ 0.000000] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved |
| [ 0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable |
| [ 0.000000] AGP: No AGP bridge found |
| [ 0.000000] e820: last_pfn = 0x21f000 max_arch_pfn = 0x400000000 |
| [ 0.000000] MTRR default type: uncachable |
| [ 0.000000] MTRR fixed ranges enabled: |
| [ 0.000000] 00000-9FFFF write-back |
| [ 0.000000] A0000-BFFFF uncachable |
| [ 0.000000] C0000-FFFFF write-back |
| [ 0.000000] MTRR variable ranges enabled: |
| [ 0.000000] 0 base 000000000 mask F80000000 write-back |
| [ 0.000000] 1 base 080000000 mask FC0000000 write-back |
| [ 0.000000] 2 base 0C0000000 mask FF8000000 write-back |
| [ 0.000000] 3 disabled |
| [ 0.000000] 4 disabled |
| [ 0.000000] 5 disabled |
| [ 0.000000] 6 base 0FFC00000 mask FFFC00000 write-protect |
| [ 0.000000] 7 disabled |
| [ 0.000000] TOM2: 000000021f000000 aka 8688M |
| [ 0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106 |
| [ 0.000000] e820: last_pfn = 0xc7fbe max_arch_pfn = 0x400000000 |
| [ 0.000000] found SMP MP-table at [mem 0x000f7450-0x000f745f] mapped at [ffff8800000f7450] |
| [ 0.000000] Base memory trampoline at [ffff880000099000] 99000 size 24576 |
| [ 0.000000] Using GB pages for direct mapping |
| [ 0.000000] init_memory_mapping: [mem 0x00000000-0x000fffff] |
| [ 0.000000] [mem 0x00000000-0x000fffff] page 4k |
| [ 0.000000] BRK [0x01af1000, 0x01af1fff] PGTABLE |
| [ 0.000000] BRK [0x01af2000, 0x01af2fff] PGTABLE |
| [ 0.000000] BRK [0x01af3000, 0x01af3fff] PGTABLE |
| [ 0.000000] init_memory_mapping: [mem 0x21ee00000-0x21effffff] |
| [ 0.000000] [mem 0x21ee00000-0x21effffff] page 2M |
| [ 0.000000] BRK [0x01af4000, 0x01af4fff] PGTABLE |
| [ 0.000000] init_memory_mapping: [mem 0x21c000000-0x21edfffff] |
| [ 0.000000] [mem 0x21c000000-0x21edfffff] page 2M |
| [ 0.000000] init_memory_mapping: [mem 0x200000000-0x21bffffff] |
| [ 0.000000] [mem 0x200000000-0x21bffffff] page 2M |
| [ 0.000000] init_memory_mapping: [mem 0x00100000-0xc7fbdfff] |
| [ 0.000000] [mem 0x00100000-0x001fffff] page 4k |
| [ 0.000000] [mem 0x00200000-0x3fffffff] page 2M |
| [ 0.000000] [mem 0x40000000-0xbfffffff] page 1G |
| [ 0.000000] [mem 0xc0000000-0xc7dfffff] page 2M |
| [ 0.000000] [mem 0xc7e00000-0xc7fbdfff] page 4k |
| [ 0.000000] init_memory_mapping: [mem 0x100000000-0x1ffffffff] |
| [ 0.000000] [mem 0x100000000-0x1ffffffff] page 1G |
| [ 0.000000] RAMDISK: [mem 0x3626e000-0x3712efff] |
| [ 0.000000] ACPI: Early table checksum verification disabled |
| [ 0.000000] ACPI: RSDP 0x00000000000F7430 000014 (v00 CORE ) |
| [ 0.000000] ACPI: RSDT 0x00000000C7FE2624 000040 (v01 CORE COREBOOT 00000000 CORE 00000000) |
| [ 0.000000] ACPI: FACP 0x00000000C7FE4D18 0000F4 (v04 CORE COREBOOT 00000000 CORE 00000000) |
| [ 0.000000] ACPI: DSDT 0x00000000C7FE26C8 00260E (v02 ASROCK COREBOOT 00010001 INTL 20140926) |
| [ 0.000000] ACPI: FACS 0x00000000C7FE4CD8 000040 |
| [ 0.000000] ACPI: HPET 0x00000000C7FE4E10 000038 (v01 CORE COREBOOT 00000000 CORE 00000000) |
| [ 0.000000] ACPI: APIC 0x00000000C7FE4E48 00005C (v01 CORE COREBOOT 00000000 CORE 00000000) |
| [ 0.000000] ACPI: HEST 0x00000000C7FE4EA8 000028 (v01 CORE COREBOOT 00000000 CORE 00000000) |
| [ 0.000000] ACPI: SSDT 0x00000000C7FE4ED0 00168E (v02 AMD ALIB 00000001 MSFT 04000000) |
| [ 0.000000] ACPI: SSDT 0x00000000C7FE6560 0003DE (v01 AMD POWERNOW 00000001 AMD 00000001) |
| [ 0.000000] ACPI: SSDT 0x00000000C7FE6940 000045 (v02 CORE COREBOOT 0000002A CORE 0000002A) |
| [ 0.000000] ACPI: Local APIC address 0xfee00000 |
| [ 0.000000] No NUMA configuration found |
| [ 0.000000] Faking a node at [mem 0x0000000000000000-0x000000021effffff] |
| [ 0.000000] Initmem setup node 0 [mem 0x00000000-0x21effffff] |
| [ 0.000000] NODE_DATA [mem 0x21eff9000-0x21effdfff] |
| [ 0.000000] [ffffea0000000000-ffffea00077fffff] PMD -> [ffff880216c00000-ffff88021d7fffff] on node 0 |
| [ 0.000000] Zone ranges: |
| [ 0.000000] DMA [mem 0x00001000-0x00ffffff] |
| [ 0.000000] DMA32 [mem 0x01000000-0xffffffff] |
| [ 0.000000] Normal [mem 0x100000000-0x21effffff] |
| [ 0.000000] Movable zone start for each node |
| [ 0.000000] Early memory node ranges |
| [ 0.000000] node 0: [mem 0x00001000-0x0009efff] |
| [ 0.000000] node 0: [mem 0x00100000-0xc7fbdfff] |
| [ 0.000000] node 0: [mem 0x100000000-0x21effffff] |
| [ 0.000000] On node 0 totalpages: 1994588 |
| [ 0.000000] DMA zone: 56 pages used for memmap |
| [ 0.000000] DMA zone: 21 pages reserved |
| [ 0.000000] DMA zone: 3998 pages, LIFO batch:0 |
| [ 0.000000] DMA32 zone: 11144 pages used for memmap |
| [ 0.000000] DMA32 zone: 815038 pages, LIFO batch:31 |
| [ 0.000000] Normal zone: 16072 pages used for memmap |
| [ 0.000000] Normal zone: 1175552 pages, LIFO batch:31 |
| [ 0.000000] ACPI: PM-Timer IO Port: 0x808 |
| [ 0.000000] ACPI: Local APIC address 0xfee00000 |
| [ 0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled) |
| [ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled) |
| [ 0.000000] ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0]) |
| [ 0.000000] IOAPIC[0]: apic_id 2, version 33, address 0xfec00000, GSI 0-23 |
| [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) |
| [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 low level) |
| [ 0.000000] ACPI: IRQ0 used by override. |
| [ 0.000000] ACPI: IRQ2 used by override. |
| [ 0.000000] ACPI: IRQ9 used by override. |
| [ 0.000000] Using ACPI (MADT) for SMP configuration information |
| [ 0.000000] ACPI: HPET id: 0x43538210 base: 0xfed00000 |
| [ 0.000000] smpboot: Allowing 2 CPUs, 0 hotplug CPUs |
| [ 0.000000] nr_irqs_gsi: 40 |
| [ 0.000000] PM: Registered nosave memory: [mem 0x0009f000-0x0009ffff] |
| [ 0.000000] PM: Registered nosave memory: [mem 0x000a0000-0x000effff] |
| [ 0.000000] PM: Registered nosave memory: [mem 0x000f0000-0x000fffff] |
| [ 0.000000] PM: Registered nosave memory: [mem 0xc7fbe000-0xdfffffff] |
| [ 0.000000] PM: Registered nosave memory: [mem 0xe0000000-0xf7ffffff] |
| [ 0.000000] PM: Registered nosave memory: [mem 0xf8000000-0xf8ffffff] |
| [ 0.000000] PM: Registered nosave memory: [mem 0xf9000000-0xffffffff] |
| [ 0.000000] e820: [mem 0xe0000000-0xf7ffffff] available for PCI devices |
| [ 0.000000] Booting paravirtualized kernel on bare hardware |
| [ 0.000000] setup_percpu: NR_CPUS:512 nr_cpumask_bits:512 nr_cpu_ids:2 nr_node_ids:1 |
| [ 0.000000] PERCPU: Embedded 28 pages/cpu @ffff88021ec00000 s85824 r8192 d20672 u1048576 |
| [ 0.000000] pcpu-alloc: s85824 r8192 d20672 u1048576 alloc=1*2097152 |
| [ 0.000000] pcpu-alloc: [0] 0 1 |
| [ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 1967295 |
| [ 0.000000] Policy zone: Normal |
| [ 0.000000] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-3.16-2-amd64 root=UUID=7d4748f5-6bf2-44dd-a78c-7c82355091e1 ro quiet |
| [ 0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes) |
| [ 0.000000] AGP: Checking aperture... |
| [ 0.000000] AGP: No AGP bridge found |
| [ 0.000000] Calgary: detecting Calgary via BIOS EBDA area |
| [ 0.000000] Calgary: Unable to locate Rio Grande table in EBDA - bailing! |
| [ 0.000000] Memory: 7774788K/7978352K available (5188K kernel code, 941K rwdata, 1824K rodata, 1196K init, 840K bss, 203564K reserved) |
| [ 0.000000] Hierarchical RCU implementation. |
| [ 0.000000] RCU dyntick-idle grace-period acceleration is enabled. |
| [ 0.000000] RCU restricting CPUs from NR_CPUS=512 to nr_cpu_ids=2. |
| [ 0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=2 |
| [ 0.000000] NR_IRQS:33024 nr_irqs:512 16 |
| [ 0.000000] spurious 8259A interrupt: IRQ7. |
| [ 0.000000] Console: colour VGA+ 80x25 |
| [ 0.000000] console [tty0] enabled |
| [ 0.000000] hpet clockevent registered |
| [ 0.000000] tsc: Fast TSC calibration using PIT |
| [ 0.000000] tsc: Detected 1599.956 MHz processor |
| [ 0.000055] Calibrating delay loop (skipped), value calculated using timer frequency.. 3199.91 BogoMIPS (lpj=6399824) |
| [ 0.000062] pid_max: default: 32768 minimum: 301 |
| [ 0.000082] ACPI: Core revision 20140424 |
| [ 0.006418] ACPI: All ACPI Tables successfully acquired |
| [ 0.006491] Security Framework initialized |
| [ 0.006514] AppArmor: AppArmor disabled by boot time parameter |
| [ 0.006517] Yama: disabled by default; enable with sysctl kernel.yama.* |
| [ 0.007627] Dentry cache hash table entries: 1048576 (order: 11, 8388608 bytes) |
| [ 0.013714] Inode-cache hash table entries: 524288 (order: 10, 4194304 bytes) |
| [ 0.016461] Mount-cache hash table entries: 16384 (order: 5, 131072 bytes) |
| [ 0.016486] Mountpoint-cache hash table entries: 16384 (order: 5, 131072 bytes) |
| [ 0.017154] Initializing cgroup subsys memory |
| [ 0.017174] Initializing cgroup subsys devices |
| [ 0.017193] Initializing cgroup subsys freezer |
| [ 0.017200] Initializing cgroup subsys net_cls |
| [ 0.017212] Initializing cgroup subsys blkio |
| [ 0.017221] Initializing cgroup subsys perf_event |
| [ 0.017227] Initializing cgroup subsys net_prio |
| [ 0.017282] tseg: 0000000000 |
| [ 0.017294] CPU: Physical Processor ID: 0 |
| [ 0.017297] CPU: Processor Core ID: 0 |
| [ 0.017300] mce: CPU supports 6 MCE banks |
| [ 0.017319] Last level iTLB entries: 4KB 512, 2MB 8, 4MB 4 |
| Last level dTLB entries: 4KB 512, 2MB 8, 4MB 4, 1GB 0 |
| tlb_flushall_shift: 6 |
| [ 0.017529] Freeing SMP alternatives memory: 20K (ffffffff81a18000 - ffffffff81a1d000) |
| [ 0.019990] ftrace: allocating 21542 entries in 85 pages |
| [ 0.039774] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=0 pin2=0 |
| [ 0.079472] smpboot: CPU0: AMD E-350 Processor (fam: 14, model: 01, stepping: 00) |
| [ 0.184551] Performance Events: AMD PMU driver. |
| [ 0.184560] ... version: 0 |
| [ 0.184563] ... bit width: 48 |
| [ 0.184566] ... generic registers: 4 |
| [ 0.184568] ... value mask: 0000ffffffffffff |
| [ 0.184571] ... max period: 00007fffffffffff |
| [ 0.184573] ... fixed-purpose events: 0 |
| [ 0.184575] ... event mask: 000000000000000f |
| [ 0.188003] NMI watchdog: enabled on all CPUs, permanently consumes one hw-PMU counter. |
| [ 0.188284] x86: Booting SMP configuration: |
| [ 0.188288] .... node #0, CPUs: #1 |
| [ 0.201503] x86: Booted up 1 node, 2 CPUs |
| [ 0.201508] smpboot: Total of 2 processors activated (6399.82 BogoMIPS) |
| [ 0.202434] devtmpfs: initialized |
| [ 0.213215] pinctrl core: initialized pinctrl subsystem |
| [ 0.213458] NET: Registered protocol family 16 |
| [ 0.213786] cpuidle: using governor ladder |
| [ 0.213792] cpuidle: using governor menu |
| [ 0.213984] ACPI: bus type PCI registered |
| [ 0.213990] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5 |
| [ 0.214265] PCI: Using configuration type 1 for base access |
| [ 0.214268] PCI: Using configuration type 1 for extended access |
| [ 0.214750] mtrr: your CPUs had inconsistent variable MTRR settings |
| [ 0.214753] mtrr: probably your BIOS does not setup all CPUs. |
| [ 0.214755] mtrr: corrected configuration. |
| [ 0.227740] ACPI: Added _OSI(Module Device) |
| [ 0.227748] ACPI: Added _OSI(Processor Device) |
| [ 0.227751] ACPI: Added _OSI(3.0 _SCP Extensions) |
| [ 0.227754] ACPI: Added _OSI(Processor Aggregator Device) |
| [ 0.230087] ACPI: Executed 2 blocks of module-level executable AML code |
| [ 0.234781] ACPI: Interpreter enabled |
| [ 0.234802] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S2_] (20140424/hwxface-580) |
| [ 0.234829] ACPI: (supports S0 S1 S3 S4 S5) |
| [ 0.234833] ACPI: Using IOAPIC for interrupt routing |
| [ 0.234871] HEST: Table parsing has been initialized. |
| [ 0.234878] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug |
| [ 0.253609] ACPI: Power Resource [PFN0] (on) |
| [ 0.254021] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff]) |
| [ 0.254033] acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI] |
| [ 0.254184] acpi PNP0A08:00: _OSC: OS now controls [PCIeHotplug PME AER PCIeCapability] |
| [ 0.254752] PCI host bridge to bus 0000:00 |
| [ 0.254759] pci_bus 0000:00: root bus resource [bus 00-ff] |
| [ 0.254764] pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7] |
| [ 0.254769] pci_bus 0000:00: root bus resource [io 0x0d00-0xffff] |
| [ 0.254774] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff] |
| [ 0.254778] pci_bus 0000:00: root bus resource [mem 0xe0000000-0xffffffff] |
| [ 0.254794] pci 0000:00:00.0: [1022:1510] type 00 class 0x060000 |
| [ 0.254987] pci 0000:00:01.0: [1002:9802] type 00 class 0x030000 |
| [ 0.255006] pci 0000:00:01.0: reg 0x10: [mem 0xe0000000-0xefffffff pref] |
| [ 0.255016] pci 0000:00:01.0: reg 0x14: [io 0x1000-0x10ff] |
| [ 0.255027] pci 0000:00:01.0: reg 0x18: [mem 0xf0000000-0xf003ffff] |
| [ 0.255093] pci 0000:00:01.0: supports D1 D2 |
| [ 0.255175] pci 0000:00:01.0: System wakeup disabled by ACPI |
| [ 0.255267] pci 0000:00:01.1: [1002:1314] type 00 class 0x040300 |
| [ 0.255283] pci 0000:00:01.1: reg 0x10: [mem 0xf0040000-0xf0043fff] |
| [ 0.255359] pci 0000:00:01.1: supports D1 D2 |
| [ 0.255438] pci 0000:00:01.1: System wakeup disabled by ACPI |
| [ 0.255626] pci 0000:00:11.0: [1002:4391] type 00 class 0x010601 |
| [ 0.255653] pci 0000:00:11.0: reg 0x10: [io 0x1410-0x1417] |
| [ 0.255668] pci 0000:00:11.0: reg 0x14: [io 0x1420-0x1423] |
| [ 0.255682] pci 0000:00:11.0: reg 0x18: [io 0x1418-0x141f] |
| [ 0.255696] pci 0000:00:11.0: reg 0x1c: [io 0x1424-0x1427] |
| [ 0.255710] pci 0000:00:11.0: reg 0x20: [io 0x1400-0x140f] |
| [ 0.255724] pci 0000:00:11.0: reg 0x24: [mem 0xf004b000-0xf004b3ff] |
| [ 0.255995] pci 0000:00:12.0: [1002:4397] type 00 class 0x0c0310 |
| [ 0.256016] pci 0000:00:12.0: reg 0x10: [mem 0xf0048000-0xf0048fff] |
| [ 0.256162] pci 0000:00:12.0: System wakeup disabled by ACPI |
| [ 0.256329] pci 0000:00:12.2: [1002:4396] type 00 class 0x0c0320 |
| [ 0.256356] pci 0000:00:12.2: reg 0x10: [mem 0xf004b400-0xf004b4ff] |
| [ 0.256465] pci 0000:00:12.2: supports D1 D2 |
| [ 0.256470] pci 0000:00:12.2: PME# supported from D0 D1 D2 D3hot |
| [ 0.256554] pci 0000:00:12.2: System wakeup disabled by ACPI |
| [ 0.256714] pci 0000:00:13.0: [1002:4397] type 00 class 0x0c0310 |
| [ 0.256734] pci 0000:00:13.0: reg 0x10: [mem 0xf0049000-0xf0049fff] |
| [ 0.256881] pci 0000:00:13.0: System wakeup disabled by ACPI |
| [ 0.257042] pci 0000:00:13.2: [1002:4396] type 00 class 0x0c0320 |
| [ 0.257069] pci 0000:00:13.2: reg 0x10: [mem 0xf004b500-0xf004b5ff] |
| [ 0.257178] pci 0000:00:13.2: supports D1 D2 |
| [ 0.257182] pci 0000:00:13.2: PME# supported from D0 D1 D2 D3hot |
| [ 0.257265] pci 0000:00:13.2: System wakeup disabled by ACPI |
| [ 0.257428] pci 0000:00:14.0: [1002:4385] type 00 class 0x0c0500 |
| [ 0.257739] pci 0000:00:14.2: [1002:4383] type 00 class 0x040300 |
| [ 0.257770] pci 0000:00:14.2: reg 0x10: [mem 0xf0044000-0xf0047fff 64bit] |
| [ 0.257859] pci 0000:00:14.2: PME# supported from D0 D3hot D3cold |
| [ 0.258085] pci 0000:00:14.3: [1002:439d] type 00 class 0x060100 |
| [ 0.258377] pci 0000:00:14.4: [1002:4384] type 01 class 0x060401 |
| [ 0.258499] pci 0000:00:14.4: System wakeup disabled by ACPI |
| [ 0.258655] pci 0000:00:14.5: [1002:4399] type 00 class 0x0c0310 |
| [ 0.258675] pci 0000:00:14.5: reg 0x10: [mem 0xf004a000-0xf004afff] |
| [ 0.258823] pci 0000:00:14.5: System wakeup disabled by ACPI |
| [ 0.258982] pci 0000:00:18.0: [1022:1700] type 00 class 0x060000 |
| [ 0.259152] pci 0000:00:18.1: [1022:1701] type 00 class 0x060000 |
| [ 0.259316] pci 0000:00:18.2: [1022:1702] type 00 class 0x060000 |
| [ 0.259483] pci 0000:00:18.3: [1022:1703] type 00 class 0x060000 |
| [ 0.259660] pci 0000:00:18.4: [1022:1704] type 00 class 0x060000 |
| [ 0.259828] pci 0000:00:18.5: [1022:1718] type 00 class 0x060000 |
| [ 0.259991] pci 0000:00:18.6: [1022:1716] type 00 class 0x060000 |
| [ 0.260156] pci 0000:00:18.7: [1022:1719] type 00 class 0x060000 |
| [ 0.260583] pci 0000:00:14.4: PCI bridge to [bus 01] (subtractive decode) |
| [ 0.260599] pci 0000:00:14.4: bridge window [io 0x0000-0x0cf7] (subtractive decode) |
| [ 0.260603] pci 0000:00:14.4: bridge window [io 0x0d00-0xffff] (subtractive decode) |
| [ 0.260607] pci 0000:00:14.4: bridge window [mem 0x000a0000-0x000bffff] (subtractive decode) |
| [ 0.260612] pci 0000:00:14.4: bridge window [mem 0xe0000000-0xffffffff] (subtractive decode) |
| [ 0.261358] ACPI: PCI Interrupt Link [INTA] (IRQs 3 4 5 7 10 11 12 15) *0, disabled. |
| [ 0.261617] ACPI: PCI Interrupt Link [INTB] (IRQs 3 4 5 7 10 11 12 15) *0, disabled. |
| [ 0.261837] ACPI: PCI Interrupt Link [INTC] (IRQs 3 4 5 7 10 11 12 15) *0, disabled. |
| [ 0.262007] ACPI: PCI Interrupt Link [INTD] (IRQs 3 4 5 7 10 11 12 15) *0, disabled. |
| [ 0.262178] ACPI: PCI Interrupt Link [INTE] (IRQs 3 4 5 7 10 11 12 15) *0, disabled. |
| [ 0.262348] ACPI: PCI Interrupt Link [INTF] (IRQs 9) *0, disabled. |
| [ 0.262515] ACPI: PCI Interrupt Link [INTG] (IRQs 3 4 5 7 10 11 12 15) *0, disabled. |
| [ 0.262684] ACPI: PCI Interrupt Link [INTH] (IRQs 3 4 5 7 10 11 12 15) *0, disabled. |
| [ 0.263027] ACPI: Enabled 6 GPEs in block 00 to 1F |
| [ 0.263526] vgaarb: device added: PCI:0000:00:01.0,decodes=io+mem,owns=io+mem,locks=none |
| [ 0.263542] vgaarb: loaded |
| [ 0.263545] vgaarb: bridge control possible 0000:00:01.0 |
| [ 0.263705] PCI: Using ACPI for IRQ routing |
| [ 0.263711] PCI: pci_cache_line_size set to 64 bytes |
| [ 0.263819] e820: reserve RAM buffer [mem 0x0009fc00-0x0009ffff] |
| [ 0.263824] e820: reserve RAM buffer [mem 0xc7fbe000-0xc7ffffff] |
| [ 0.263827] e820: reserve RAM buffer [mem 0x21f000000-0x21fffffff] |
| [ 0.264190] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0 |
| [ 0.264199] hpet0: 3 comparators, 32-bit 14.318180 MHz counter |
| [ 0.267385] Switched to clocksource hpet |
| [ 0.279293] pnp: PnP ACPI init |
| [ 0.279334] ACPI: bus type PNP registered |
| [ 0.279892] pnp 00:00: Plug and Play ACPI device, IDs PNP0b00 (active) |
| [ 0.280183] pnp: PnP ACPI: found 1 devices |
| [ 0.280187] ACPI: bus type PNP unregistered |
| [ 0.303634] pci 0000:00:14.4: PCI bridge to [bus 01] |
| [ 0.303663] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7] |
| [ 0.303668] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff] |
| [ 0.303673] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff] |
| [ 0.303677] pci_bus 0000:00: resource 7 [mem 0xe0000000-0xffffffff] |
| [ 0.303682] pci_bus 0000:01: resource 4 [io 0x0000-0x0cf7] |
| [ 0.303686] pci_bus 0000:01: resource 5 [io 0x0d00-0xffff] |
| [ 0.303691] pci_bus 0000:01: resource 6 [mem 0x000a0000-0x000bffff] |
| [ 0.303695] pci_bus 0000:01: resource 7 [mem 0xe0000000-0xffffffff] |
| [ 0.303888] NET: Registered protocol family 2 |
| [ 0.304592] TCP established hash table entries: 65536 (order: 7, 524288 bytes) |
| [ 0.305079] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes) |
| [ 0.305640] TCP: Hash tables configured (established 65536 bind 65536) |
| [ 0.305735] TCP: reno registered |
| [ 0.305768] UDP hash table entries: 4096 (order: 5, 131072 bytes) |
| [ 0.305864] UDP-Lite hash table entries: 4096 (order: 5, 131072 bytes) |
| [ 0.306383] NET: Registered protocol family 1 |
| [ 0.306429] pci 0000:00:01.0: Boot video device |
| [ 0.364909] PCI: CLS 64 bytes, default 64 |
| [ 0.365045] Unpacking initramfs... |
| [ 0.934925] Freeing initrd memory: 15108K (ffff88003626e000 - ffff88003712f000) |
| [ 0.934999] PCI-DMA: Using software bounce buffering for IO (SWIOTLB) |
| [ 0.935005] software IO TLB [mem 0xc3fbe000-0xc7fbe000] (64MB) mapped at [ffff8800c3fbe000-ffff8800c7fbdfff] |
| [ 0.935573] microcode: CPU0: patch_level=0x05000028 |
| [ 0.935696] microcode: CPU1: patch_level=0x05000028 |
| [ 0.935905] microcode: Microcode Update Driver: v2.00 <tigran@aivazian.fsnet.co.uk>, Peter Oruba |
| [ 0.935924] LVT offset 0 assigned for vector 0x400 |
| [ 0.935961] perf: AMD IBS detected (0x000000ff) |
| [ 0.937032] futex hash table entries: 512 (order: 3, 32768 bytes) |
| [ 0.937208] audit: initializing netlink subsys (disabled) |
| [ 0.937251] audit: type=2000 audit(1413533375.824:1): initialized |
| [ 0.938276] HugeTLB registered 2 MB page size, pre-allocated 0 pages |
| [ 0.938338] zbud: loaded |
| [ 0.939229] VFS: Disk quotas dquot_6.5.2 |
| [ 0.939373] Dquot-cache hash table entries: 512 (order 0, 4096 bytes) |
| [ 0.939583] msgmni has been set to 15214 |
| [ 0.941722] alg: No test for stdrng (krng) |
| [ 0.941835] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252) |
| [ 0.942093] io scheduler noop registered |
| [ 0.942106] io scheduler deadline registered |
| [ 0.942259] io scheduler cfq registered (default) |
| [ 0.942499] pci_hotplug: PCI Hot Plug PCI Core version: 0.5 |
| [ 0.942540] pciehp: PCI Express Hot Plug Controller Driver version: 0.4 |
| [ 0.942754] GHES: Failed to enable APEI firmware first mode. |
| [ 0.943156] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled |
| [ 0.963898] serial8250: ttyS0 at I/O 0x3f8 (irq = 4, base_baud = 115200) is a 16550A |
| [ 0.966224] Linux agpgart interface v0.103 |
| [ 0.966476] i8042: PNP: No PS/2 controller found. Probing ports directly. |
| [ 0.970609] serio: i8042 KBD port at 0x60,0x64 irq 1 |
| [ 0.970631] serio: i8042 AUX port at 0x60,0x64 irq 12 |
| [ 0.971578] mousedev: PS/2 mouse device common for all mice |
| [ 0.971798] rtc_cmos 00:00: RTC can wake from S4 |
| [ 0.972221] rtc_cmos 00:00: rtc core: registered rtc_cmos as rtc0 |
| [ 0.972340] rtc_cmos 00:00: alarms up to one day, 114 bytes nvram, hpet irqs |
| [ 0.972381] ledtrig-cpu: registered to indicate activity on CPUs |
| [ 0.972516] AMD IOMMUv2 driver by Joerg Roedel <joerg.roedel@amd.com> |
| [ 0.972519] AMD IOMMUv2 functionality not available on this system |
| [ 0.972707] TCP: cubic registered |
| [ 0.972896] NET: Registered protocol family 10 |
| [ 0.973608] mip6: Mobile IPv6 |
| [ 0.973616] NET: Registered protocol family 17 |
| [ 0.973643] mpls_gso: MPLS GSO support |
| [ 0.974765] registered taskstats version 1 |
| [ 0.975863] rtc_cmos 00:00: setting system clock to 2014-10-17 08:09:36 UTC (1413533376) |
| [ 0.975994] PM: Hibernation image not present or could not be loaded. |
| [ 0.978401] Freeing unused kernel memory: 1196K (ffffffff818ed000 - ffffffff81a18000) |
| [ 0.978410] Write protecting the kernel read-only data: 8192k |
| [ 0.983994] Freeing unused kernel memory: 944K (ffff880001514000 - ffff880001600000) |
| [ 0.985420] Freeing unused kernel memory: 224K (ffff8800017c8000 - ffff880001800000) |
| [ 1.022110] systemd-udevd[60]: starting version 215 |
| [ 1.022778] random: systemd-udevd urandom read with 2 bits of entropy available |
| [ 1.052420] ACPI: bus type USB registered |
| [ 1.052506] usbcore: registered new interface driver usbfs |
| [ 1.052535] usbcore: registered new interface driver hub |
| [ 1.052812] SCSI subsystem initialized |
| [ 1.056071] libata version 3.00 loaded. |
| [ 1.057551] ahci 0000:00:11.0: version 3.0 |
| [ 1.057714] usbcore: registered new device driver usb |
| [ 1.058758] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver |
| [ 1.058845] ahci 0000:00:11.0: AHCI 0001.0200 32 slots 6 ports 6 Gbps 0x3f impl SATA mode |
| [ 1.058856] ahci 0000:00:11.0: flags: 64bit ncq sntf ilck led clo pmp pio slum part |
| [ 1.059143] ehci-pci: EHCI PCI platform driver |
| [ 1.059775] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver |
| [ 1.062462] scsi0 : ahci |
| [ 1.063221] scsi1 : ahci |
| [ 1.063545] scsi2 : ahci |
| [ 1.063808] scsi3 : ahci |
| [ 1.063983] scsi4 : ahci |
| [ 1.064175] scsi5 : ahci |
| [ 1.064365] ata1: SATA max UDMA/133 abar m1024@0xf004b000 port 0xf004b100 irq 19 |
| [ 1.064371] ata2: SATA max UDMA/133 abar m1024@0xf004b000 port 0xf004b180 irq 19 |
| [ 1.064376] ata3: SATA max UDMA/133 abar m1024@0xf004b000 port 0xf004b200 irq 19 |
| [ 1.064381] ata4: SATA max UDMA/133 abar m1024@0xf004b000 port 0xf004b280 irq 19 |
| [ 1.064386] ata5: SATA max UDMA/133 abar m1024@0xf004b000 port 0xf004b300 irq 19 |
| [ 1.064390] ata6: SATA max UDMA/133 abar m1024@0xf004b000 port 0xf004b380 irq 19 |
| [ 1.064807] QUIRK: Enable AMD PLL fix |
| [ 1.064847] ehci-pci 0000:00:12.2: EHCI Host Controller |
| [ 1.064861] ehci-pci 0000:00:12.2: new USB bus registered, assigned bus number 1 |
| [ 1.064876] ehci-pci 0000:00:12.2: applying AMD SB700/SB800/Hudson-2/3 EHCI dummy qh workaround |
| [ 1.064960] ehci-pci 0000:00:12.2: debug port 1 |
| [ 1.065037] ehci-pci 0000:00:12.2: irq 17, io mem 0xf004b400 |
| [ 1.073705] thermal LNXTHERM:00: registered as thermal_zone0 |
| [ 1.073715] ACPI: Thermal Zone [TZ00] (40 C) |
| [ 1.076087] ACPI: Fan [FAN0] (on) |
| [ 1.076431] ehci-pci 0000:00:12.2: USB 2.0 started, EHCI 1.00 |
| [ 1.076587] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002 |
| [ 1.076592] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 |
| [ 1.076597] usb usb1: Product: EHCI Host Controller |
| [ 1.076601] usb usb1: Manufacturer: Linux 3.16-2-amd64 ehci_hcd |
| [ 1.076604] usb usb1: SerialNumber: 0000:00:12.2 |
| [ 1.077588] hub 1-0:1.0: USB hub found |
| [ 1.077610] hub 1-0:1.0: 5 ports detected |
| [ 1.078287] ehci-pci 0000:00:13.2: EHCI Host Controller |
| [ 1.078301] ehci-pci 0000:00:13.2: new USB bus registered, assigned bus number 2 |
| [ 1.078313] ehci-pci 0000:00:13.2: applying AMD SB700/SB800/Hudson-2/3 EHCI dummy qh workaround |
| [ 1.078330] ehci-pci 0000:00:13.2: debug port 1 |
| [ 1.078388] ehci-pci 0000:00:13.2: irq 17, io mem 0xf004b500 |
| [ 1.087647] ehci-pci 0000:00:13.2: USB 2.0 started, EHCI 1.00 |
| [ 1.087796] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002 |
| [ 1.087802] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1 |
| [ 1.087806] usb usb2: Product: EHCI Host Controller |
| [ 1.087810] usb usb2: Manufacturer: Linux 3.16-2-amd64 ehci_hcd |
| [ 1.087814] usb usb2: SerialNumber: 0000:00:13.2 |
| [ 1.088103] hub 2-0:1.0: USB hub found |
| [ 1.088122] hub 2-0:1.0: 5 ports detected |
| [ 1.088975] ohci-pci: OHCI PCI platform driver |
| [ 1.089393] ohci-pci 0000:00:12.0: OHCI PCI host controller |
| [ 1.089409] ohci-pci 0000:00:12.0: new USB bus registered, assigned bus number 3 |
| [ 1.089477] ohci-pci 0000:00:12.0: irq 18, io mem 0xf0048000 |
| [ 1.147919] usb usb3: New USB device found, idVendor=1d6b, idProduct=0001 |
| [ 1.147929] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1 |
| [ 1.147933] usb usb3: Product: OHCI PCI host controller |
| [ 1.147937] usb usb3: Manufacturer: Linux 3.16-2-amd64 ohci_hcd |
| [ 1.147941] usb usb3: SerialNumber: 0000:00:12.0 |
| [ 1.148544] hub 3-0:1.0: USB hub found |
| [ 1.148570] hub 3-0:1.0: 5 ports detected |
| [ 1.149210] ohci-pci 0000:00:13.0: OHCI PCI host controller |
| [ 1.149224] ohci-pci 0000:00:13.0: new USB bus registered, assigned bus number 4 |
| [ 1.149278] ohci-pci 0000:00:13.0: irq 18, io mem 0xf0049000 |
| [ 1.207853] usb usb4: New USB device found, idVendor=1d6b, idProduct=0001 |
| [ 1.207863] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1 |
| [ 1.207868] usb usb4: Product: OHCI PCI host controller |
| [ 1.207872] usb usb4: Manufacturer: Linux 3.16-2-amd64 ohci_hcd |
| [ 1.207876] usb usb4: SerialNumber: 0000:00:13.0 |
| [ 1.208482] hub 4-0:1.0: USB hub found |
| [ 1.208511] hub 4-0:1.0: 5 ports detected |
| [ 1.209139] ohci-pci 0000:00:14.5: OHCI PCI host controller |
| [ 1.209153] ohci-pci 0000:00:14.5: new USB bus registered, assigned bus number 5 |
| [ 1.209208] ohci-pci 0000:00:14.5: irq 18, io mem 0xf004a000 |
| [ 1.267847] usb usb5: New USB device found, idVendor=1d6b, idProduct=0001 |
| [ 1.267857] usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1 |
| [ 1.267862] usb usb5: Product: OHCI PCI host controller |
| [ 1.267866] usb usb5: Manufacturer: Linux 3.16-2-amd64 ohci_hcd |
| [ 1.267870] usb usb5: SerialNumber: 0000:00:14.5 |
| [ 1.268484] hub 5-0:1.0: USB hub found |
| [ 1.268512] hub 5-0:1.0: 2 ports detected |
| [ 1.383727] ata2: SATA link down (SStatus 0 SControl 300) |
| [ 1.383781] ata4: SATA link down (SStatus 0 SControl 300) |
| [ 1.383824] ata6: SATA link down (SStatus 0 SControl 300) |
| [ 1.383854] ata1: SATA link down (SStatus 0 SControl 300) |
| [ 1.383883] ata5: SATA link down (SStatus 0 SControl 300) |
| [ 1.387866] usb 1-3: new high-speed USB device number 2 using ehci-pci |
| [ 1.537504] usb 1-3: New USB device found, idVendor=148f, idProduct=2870 |
| [ 1.537517] usb 1-3: New USB device strings: Mfr=1, Product=2, SerialNumber=0 |
| [ 1.537522] usb 1-3: Product: 802.11 n WLAN |
| [ 1.537526] usb 1-3: Manufacturer: Ralink |
| [ 1.555785] ata3: SATA link up 6.0 Gbps (SStatus 133 SControl 300) |
| [ 1.556679] ata3.00: ATA-9: SanDisk SDSSDP064G, 2.0.0, max UDMA/133 |
| [ 1.556689] ata3.00: 125045424 sectors, multi 1: LBA48 NCQ (depth 31/32) |
| [ 1.558051] ata3.00: configured for UDMA/133 |
| [ 1.558811] scsi 2:0:0:0: Direct-Access ATA SanDisk SDSSDP06 0 PQ: 0 ANSI: 5 |
| [ 1.586648] sd 2:0:0:0: [sda] 125045424 512-byte logical blocks: (64.0 GB/59.6 GiB) |
| [ 1.586800] sd 2:0:0:0: [sda] Write Protect is off |
| [ 1.586806] sd 2:0:0:0: [sda] Mode Sense: 00 3a 00 00 |
| [ 1.586854] sd 2:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA |
| [ 1.587918] sda: sda1 |
| [ 1.589279] sd 2:0:0:0: [sda] Attached SCSI disk |
| [ 1.590758] sd 2:0:0:0: Attached scsi generic sg0 type 0 |
| [ 1.859732] usb 4-1: new low-speed USB device number 2 using ohci-pci |
| [ 1.935615] tsc: Refined TSC clocksource calibration: 1599.999 MHz |
| [ 2.042840] usb 4-1: New USB device found, idVendor=046d, idProduct=c31b |
| [ 2.042850] usb 4-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0 |
| [ 2.042855] usb 4-1: Product: Logitech USB Keyboard |
| [ 2.042859] usb 4-1: Manufacturer: Logitech |
| [ 2.054309] hidraw: raw HID events driver (C) Jiri Kosina |
| [ 2.079351] usbcore: registered new interface driver usbhid |
| [ 2.079359] usbhid: USB HID core driver |
| [ 2.082036] input: Logitech Logitech USB Keyboard as /devices/pci0000:00/0000:00:13.0/usb4/4-1/4-1:1.0/0003:046D:C31B.0001/input/input2 |
| [ 2.082702] hid-generic 0003:046D:C31B.0001: input,hidraw0: USB HID v1.11 Keyboard [Logitech Logitech USB Keyboard] on usb-0000:00:13.0-1/input0 |
| [ 2.086235] input: Logitech Logitech USB Keyboard as /devices/pci0000:00/0000:00:13.0/usb4/4-1/4-1:1.1/0003:046D:C31B.0002/input/input3 |
| [ 2.086391] hid-generic 0003:046D:C31B.0002: input,hidraw1: USB HID v1.11 Device [Logitech Logitech USB Keyboard] on usb-0000:00:13.0-1/input1 |
| [ 2.238134] EXT4-fs (sda1): mounted filesystem with ordered data mode. Opts: (null) |
| [ 2.727012] fuse init (API version 7.23) |
| [ 2.916092] systemd-udevd[169]: starting version 215 |
| [ 2.935758] Switched to clocksource tsc |
| [ 3.101277] ACPI: acpi_idle registered with cpuidle |
| [ 3.102430] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input4 |
| [ 3.102444] ACPI: Power Button [PWRB] |
| [ 3.102566] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input5 |
| [ 3.102572] ACPI: Power Button [PWRF] |
| [ 3.123974] acpi-cpufreq: overriding BIOS provided _PSD data |
| [ 3.138984] [drm] Initialized drm 1.1.0 20060810 |
| [ 3.149557] snd_hda_intel 0000:00:01.1: irq 40 for MSI/MSI-X |
| [ 3.173947] [drm] radeon kernel modesetting enabled. |
| [ 3.176302] input: HD-Audio Generic HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:01.1/sound/card0/input6 |
| [ 3.187413] [drm] initializing kernel modesetting (PALM 0x1002:0x9802 0x1002:0x9802). |
| [ 3.187502] [drm] register mmio base: 0xF0000000 |
| [ 3.187506] [drm] register mmio size: 262144 |
| [ 3.187607] ATOM BIOS: AMD |
| [ 3.187693] radeon 0000:00:01.0: VRAM: 384M 0x0000000000000000 - 0x0000000017FFFFFF (384M used) |
| [ 3.187699] radeon 0000:00:01.0: GTT: 1024M 0x0000000018000000 - 0x0000000057FFFFFF |
| [ 3.187703] [drm] Detected VRAM RAM=384M, BAR=256M |
| [ 3.187706] [drm] RAM width 32bits DDR |
| [ 3.189437] sound hdaudioC1D0: ALC892: SKU not ready 0x00000100 |
| [ 3.190458] sound hdaudioC1D0: autoconfig: line_outs=4 (0x14/0x16/0x15/0x17/0x0) type:line |
| [ 3.190463] sound hdaudioC1D0: speaker_outs=0 (0x0/0x0/0x0/0x0/0x0) |
| [ 3.190472] sound hdaudioC1D0: hp_outs=1 (0x1b/0x0/0x0/0x0/0x0) |
| [ 3.190476] sound hdaudioC1D0: mono: mono_out=0x0 |
| [ 3.190480] sound hdaudioC1D0: dig-out=0x1e/0x0 |
| [ 3.190483] sound hdaudioC1D0: inputs: |
| [ 3.190488] sound hdaudioC1D0: Rear Mic=0x18 |
| [ 3.190493] sound hdaudioC1D0: Front Mic=0x19 |
| [ 3.190497] sound hdaudioC1D0: Line=0x1a |
| [ 3.190501] sound hdaudioC1D0: CD=0x1c |
| [ 3.214821] [TTM] Zone kernel: Available graphics memory: 3896140 kiB |
| [ 3.214830] [TTM] Zone dma32: Available graphics memory: 2097152 kiB |
| [ 3.214833] [TTM] Initializing pool allocator |
| [ 3.214852] [TTM] Initializing DMA pool allocator |
| [ 3.214903] [drm] radeon: 384M of VRAM memory ready |
| [ 3.214907] [drm] radeon: 1024M of GTT memory ready. |
| [ 3.214943] [drm] Loading PALM Microcode |
| [ 3.216481] radeon 0000:00:01.0: firmware: direct-loading firmware radeon/PALM_pfp.bin |
| [ 3.217252] radeon 0000:00:01.0: firmware: direct-loading firmware radeon/PALM_me.bin |
| [ 3.217817] radeon 0000:00:01.0: firmware: direct-loading firmware radeon/SUMO_rlc.bin |
| [ 3.217831] [drm] Internal thermal controller without fan control |
| [ 3.217946] [drm] Found smc ucode version: 0x00010601 |
| [ 3.218033] [drm] radeon: dpm initialized |
| [ 3.220763] radeon 0000:00:01.0: firmware: direct-loading firmware radeon/SUMO_uvd.bin |
| [ 3.220852] [drm] GART: num cpu pages 262144, num gpu pages 262144 |
| [ 3.258482] input: HDA Digital PCBeep as /devices/pci0000:00/0000:00:14.2/sound/card1/hdaudioC1D0/input7 |
| [ 3.258922] input: HDA ATI SB Rear Mic as /devices/pci0000:00/0000:00:14.2/sound/card1/input8 |
| [ 3.258999] input: HDA ATI SB Front Mic as /devices/pci0000:00/0000:00:14.2/sound/card1/input9 |
| [ 3.259082] input: HDA ATI SB Line as /devices/pci0000:00/0000:00:14.2/sound/card1/input10 |
| [ 3.259163] input: HDA ATI SB Line Out Front as /devices/pci0000:00/0000:00:14.2/sound/card1/input11 |
| [ 3.259237] input: HDA ATI SB Line Out Surround as /devices/pci0000:00/0000:00:14.2/sound/card1/input12 |
| [ 3.259311] input: HDA ATI SB Line Out CLFE as /devices/pci0000:00/0000:00:14.2/sound/card1/input13 |
| [ 3.267551] input: HDA ATI SB Line Out Side as /devices/pci0000:00/0000:00:14.2/sound/card1/input14 |
| [ 3.267632] input: HDA ATI SB Front Headphone as /devices/pci0000:00/0000:00:14.2/sound/card1/input15 |
| [ 3.270301] [drm] PCIE GART of 1024M enabled (table at 0x0000000000273000). |
| [ 3.272610] radeon 0000:00:01.0: WB enabled |
| [ 3.272623] radeon 0000:00:01.0: fence driver on ring 0 use gpu addr 0x0000000018000c00 and cpu addr 0xffff880213e70c00 |
| [ 3.272629] radeon 0000:00:01.0: fence driver on ring 3 use gpu addr 0x0000000018000c0c and cpu addr 0xffff880213e70c0c |
| [ 3.273411] radeon 0000:00:01.0: fence driver on ring 5 use gpu addr 0x0000000000072118 and cpu addr 0xffffc90000fb2118 |
| [ 3.273417] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013). |
| [ 3.273419] [drm] Driver supports precise vblank timestamp query. |
| [ 3.273458] radeon 0000:00:01.0: irq 41 for MSI/MSI-X |
| [ 3.273479] radeon 0000:00:01.0: radeon: using MSI. |
| [ 3.273519] [drm] radeon: irq initialized. |
| [ 3.286667] input: PC Speaker as /devices/platform/pcspkr/input/input16 |
| [ 3.295445] [drm] ring test on 0 succeeded in 1 usecs |
| [ 3.295513] [drm] ring test on 3 succeeded in 1 usecs |
| [ 3.347671] kvm: Nested Virtualization enabled |
| [ 3.347681] kvm: Nested Paging enabled |
| [ 3.356933] [drm] ring test on 5 succeeded in 1 usecs |
| [ 3.376852] [drm] UVD initialized successfully. |
| [ 3.377808] [drm] ib test on ring 0 succeeded in 0 usecs |
| [ 3.377854] [drm] ib test on ring 3 succeeded in 0 usecs |
| [ 3.388841] random: nonblocking pool is initialized |
| [ 3.399111] [drm] ib test on ring 5 succeeded |
| [ 3.428779] [drm] Radeon Display Connectors |
| [ 3.428788] [drm] Connector 0: |
| [ 3.428791] [drm] HDMI-A-1 |
| [ 3.428794] [drm] HPD1 |
| [ 3.428798] [drm] DDC: 0x6430 0x6430 0x6434 0x6434 0x6438 0x6438 0x643c 0x643c |
| [ 3.428801] [drm] Encoders: |
| [ 3.428804] [drm] DFP1: INTERNAL_UNIPHY |
| [ 3.428806] [drm] Connector 1: |
| [ 3.428808] [drm] HDMI-A-2 |
| [ 3.428810] [drm] HPD2 |
| [ 3.428814] [drm] DDC: 0x6440 0x6440 0x6444 0x6444 0x6448 0x6448 0x644c 0x644c |
| [ 3.428816] [drm] Encoders: |
| [ 3.428818] [drm] DFP2: INTERNAL_UNIPHY |
| [ 3.428820] [drm] Connector 2: |
| [ 3.428822] [drm] VGA-1 |
| [ 3.428825] [drm] DDC: 0x64d8 0x64d8 0x64dc 0x64dc 0x64e0 0x64e0 0x64e4 0x64e4 |
| [ 3.428827] [drm] Encoders: |
| [ 3.428829] [drm] CRT1: INTERNAL_KLDSCP_DAC1 |
| [ 3.505253] [drm] fb mappable at 0xE0477000 |
| [ 3.505262] [drm] vram apper at 0xE0000000 |
| [ 3.505265] [drm] size 3686400 |
| [ 3.505267] [drm] fb depth is 24 |
| [ 3.505269] [drm] pitch is 5120 |
| [ 3.505499] fbcon: radeondrmfb (fb0) is primary device |
| [ 3.533813] Console: switching to colour frame buffer device 160x45 |
| [ 3.539607] radeon 0000:00:01.0: fb0: radeondrmfb frame buffer device |
| [ 3.539612] radeon 0000:00:01.0: registered panic notifier |
| [ 3.549581] EXT4-fs (sda1): re-mounted. Opts: errors=remount-ro |
| [ 3.551703] [drm] Initialized radeon 2.39.0 20080528 for 0000:00:01.0 on minor 0 |
| [ 3.553373] ACPI Warning: SystemIO range 0x0000000000000b00-0x0000000000000b07 conflicts with OpRegion 0x0000000000000b00-0x0000000000000b0b (\SMB0) (20140424/utaddress-258) |
| [ 3.553395] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver |
| [ 3.564789] sp5100_tco: SP5100/SB800 TCO WatchDog Timer Driver v0.05 |
| [ 3.564923] sp5100_tco: PCI Revision ID: 0x42 |
| [ 3.565041] sp5100_tco: Using 0xfed80b00 for watchdog MMIO address |
| [ 3.565056] sp5100_tco: Last reboot was not triggered by watchdog. |
| [ 3.565863] sp5100_tco: initialized (0xffffc90000e34b00). heartbeat=60 sec (nowayout=0) |
| [ 3.611299] systemd-journald[150]: Received request to flush runtime journal from PID 1 |
| [ 4.570514] cfg80211: Calling CRDA to update world regulatory domain |
| [ 4.763735] usb 1-3: reset high-speed USB device number 2 using ehci-pci |
| [ 4.905053] ieee80211 phy0: rt2x00_set_rt: Info - RT chipset 2872, rev 0202 detected |
| [ 4.959578] ieee80211 phy0: rt2x00_set_rf: Info - RF chipset 0001 detected |
| [ 5.071970] ieee80211 phy0: Selected rate control algorithm 'minstrel_ht' |
| [ 5.072634] usbcore: registered new interface driver rt2800usb |
| [ 5.119111] ieee80211 phy0: rt2x00lib_request_firmware: Info - Loading firmware file 'rt2870.bin' |
| [ 5.125010] rt2800usb 1-3:1.0: firmware: direct-loading firmware rt2870.bin |
| [ 5.125032] ieee80211 phy0: rt2x00lib_request_firmware: Info - Firmware detected - version: 0.29 |
| [ 5.380714] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready |
| [ 60.700697] usb 1-3: USB disconnect, device number 2 |
| [ 62.299686] ieee80211 phy0: rt2800_wait_wpdma_ready: Error - WPDMA TX/RX busy [0xffffffff] |
| [ 66.415871] usb 3-3: new full-speed USB device number 2 using ohci-pci |
| [ 66.578138] usb 3-3: not running at top speed; connect to a high speed hub |
| [ 66.602150] usb 3-3: New USB device found, idVendor=148f, idProduct=2870 |
| [ 66.602168] usb 3-3: New USB device strings: Mfr=1, Product=2, SerialNumber=0 |
| [ 66.602177] usb 3-3: Product: 802.11 n WLAN |
| [ 66.602185] usb 3-3: Manufacturer: Ralink |
| [ 66.747969] usb 3-3: reset full-speed USB device number 2 using ohci-pci |
| [ 66.919928] ieee80211 phy1: rt2x00_set_rt: Info - RT chipset 2872, rev 0202 detected |
| [ 66.980185] ieee80211 phy1: rt2x00_set_rf: Info - RF chipset 0001 detected |
| [ 66.984783] ieee80211 phy1: Selected rate control algorithm 'minstrel_ht' |
| [ 68.065427] ieee80211 phy1: rt2x00lib_request_firmware: Info - Loading firmware file 'rt2870.bin' |
| [ 68.065489] rt2800usb 3-3:1.0: firmware: direct-loading firmware rt2870.bin |
| [ 68.065500] ieee80211 phy1: rt2x00lib_request_firmware: Info - Firmware detected - version: 0.29 |
| [ 70.507471] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready |
| [ 151.584857] usb 3-3: USB disconnect, device number 2 |
| [ 153.183753] ieee80211 phy1: rt2800_wait_wpdma_ready: Error - WPDMA TX/RX busy [0xffffffff] |