blob: cd2bb1d077f13d583ce44aa8538722501390d6f8 [file] [log] [blame]
[ 0.000000] Initializing cgroup subsys cpuset
[ 0.000000] Initializing cgroup subsys cpu
[ 0.000000] Initializing cgroup subsys cpuacct
[ 0.000000] Linux version 3.16.0-4-amd64 (debian-kernel@lists.debian.org) (gcc version 4.8.4 (Debian 4.8.4-1) ) #1 SMP Debian 3.16.7-ckt9-2 (2015-04-13)
[ 0.000000] Command line: root=/dev/nfs initrd=initrd-cb-test-tgt-i386 rootfstype=nfs nfsroot=10.100.1.100:/nfsroots/cb-test-tgt-01,v3,hard,nointr,tcp ip=10.100.1.10::10.100.1.1:255.255.255.0:embed-o-matic:eth0:off console=ttyS0,115200n8 consoleblank=0 rw BOOT_IMAGE=vmlinuz-cb-test-tgt-i386
[ 0.000000] e820: BIOS-provided physical RAM map:
[ 0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009fbff] usable
[ 0.000000] BIOS-e820: [mem 0x000000000009fc00-0x000000000009ffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000000f0000-0x00000000000fffff] reserved
[ 0.000000] BIOS-e820: [mem 0x0000000000100000-0x00000000bff99fff] usable
[ 0.000000] BIOS-e820: [mem 0x00000000bff9a000-0x00000000cfffffff] reserved
[ 0.000000] BIOS-e820: [mem 0x0000000100000000-0x000000017fffffff] usable
[ 0.000000] NX (Execute Disable) protection: active
[ 0.000000] SMBIOS 2.7 present.
[ 0.000000] DMI: ASUS KFSN4-DRE/KFSN4-DRE, BIOS RAPTOR-NORMAL 03/14/2017
[ 0.000000] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
[ 0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable
[ 0.000000] AGP: No AGP bridge found
[ 0.000000] e820: last_pfn = 0x180000 max_arch_pfn = 0x400000000
[ 0.000000] MTRR default type: uncachable
[ 0.000000] MTRR fixed ranges enabled:
[ 0.000000] 00000-9FFFF write-back
[ 0.000000] A0000-BFFFF uncachable
[ 0.000000] C0000-FFFFF write-back
[ 0.000000] MTRR variable ranges enabled:
[ 0.000000] 0 base 000000000000 mask FFFF80000000 write-back
[ 0.000000] 1 base 000080000000 mask FFFFC0000000 write-back
[ 0.000000] 2 base 0000F8000000 mask FFFFFC000000 write-combining
[ 0.000000] 3 disabled
[ 0.000000] 4 disabled
[ 0.000000] 5 disabled
[ 0.000000] 6 disabled
[ 0.000000] 7 disabled
[ 0.000000] TOM2: 0000000180000000 aka 6144M
[ 0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
[ 0.000000] e820: last_pfn = 0xbff9a max_arch_pfn = 0x400000000
[ 0.000000] found SMP MP-table at [mem 0x000f0690-0x000f069f] mapped at [ffff8800000f0690]
[ 0.000000] Base memory trampoline at [ffff880000099000] 99000 size 24576
[ 0.000000] Using GB pages for direct mapping
[ 0.000000] init_memory_mapping: [mem 0x00000000-0x000fffff]
[ 0.000000] [mem 0x00000000-0x000fffff] page 4k
[ 0.000000] BRK [0x01af4000, 0x01af4fff] PGTABLE
[ 0.000000] BRK [0x01af5000, 0x01af5fff] PGTABLE
[ 0.000000] BRK [0x01af6000, 0x01af6fff] PGTABLE
[ 0.000000] init_memory_mapping: [mem 0x17fe00000-0x17fffffff]
[ 0.000000] [mem 0x17fe00000-0x17fffffff] page 1G
[ 0.000000] init_memory_mapping: [mem 0x17c000000-0x17fdfffff]
[ 0.000000] [mem 0x17c000000-0x17fdfffff] page 1G
[ 0.000000] init_memory_mapping: [mem 0x100000000-0x17bffffff]
[ 0.000000] [mem 0x100000000-0x17bffffff] page 1G
[ 0.000000] init_memory_mapping: [mem 0x00100000-0xbff99fff]
[ 0.000000] [mem 0x00100000-0x001fffff] page 4k
[ 0.000000] [mem 0x00200000-0x3fffffff] page 2M
[ 0.000000] [mem 0x40000000-0x7fffffff] page 1G
[ 0.000000] [mem 0x80000000-0xbfdfffff] page 2M
[ 0.000000] [mem 0xbfe00000-0xbff99fff] page 4k
[ 0.000000] RAMDISK: [mem 0x7f24c000-0x7fffefff]
[ 0.000000] ACPI: Early table checksum verification disabled
[ 0.000000] ACPI: RSDP 0x00000000000F07F0 000024 (v02 CORE )
[ 0.000000] ACPI: XSDT 0x00000000BFFAB0E0 00006C (v01 CORE COREBOOT 00000000 CORE 00000000)
[ 0.000000] ACPI: FACP 0x00000000BFFAD910 000074 (v01 CORE COREBOOT 00000000 CORE 00000000)
[ 0.000000] ACPI: DSDT 0x00000000BFFAB280 002687 (v02 ASUS COREBOOT 00000001 INTL 20160831)
[ 0.000000] ACPI: FACS 0x00000000BFFAB240 000040
[ 0.000000] ACPI: SSDT 0x00000000BFFADA10 000E1E (v02 CORE COREBOOT 0000002A CORE 0000002A)
[ 0.000000] ACPI: TCPA 0x00000000BFFAE830 000032 (v02 CORE COREBOOT 00000000 CORE 00000000)
[ 0.000000] ACPI: APIC 0x00000000BFFAE870 000072 (v01 CORE COREBOOT 00000000 CORE 00000000)
[ 0.000000] ACPI: SRAT 0x00000000BFFAE8F0 0000F0 (v01 CORE COREBOOT 00000000 CORE 00000000)
[ 0.000000] ACPI: SLIT 0x00000000BFFAE9E0 000030 (v01 CORE COREBOOT 00000000 CORE 00000000)
[ 0.000000] ACPI: HPET 0x00000000BFFAEA10 000038 (v01 CORE COREBOOT 00000000 CORE 00000000)
[ 0.000000] ACPI: SRAT 0x00000000BFFAEA50 0000F0 (v01 CORE COREBOOT 00000000 CORE 00000000)
[ 0.000000] ACPI: SLIT 0x00000000BFFAEB40 000030 (v01 CORE COREBOOT 00000000 CORE 00000000)
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] SRAT: PXM 0 -> APIC 0x00 -> Node 0
[ 0.000000] SRAT: PXM 1 -> APIC 0x04 -> Node 1
[ 0.000000] SRAT: Node 0 PXM 0 [mem 0x00000000-0x0009ffff]
[ 0.000000] SRAT: Node 0 PXM 0 [mem 0x00100000-0xbfffffff]
[ 0.000000] SRAT: Node 0 PXM 0 [mem 0x100000000-0x13fffffff]
[ 0.000000] SRAT: Node 1 PXM 1 [mem 0x140000000-0x17fffffff]
[ 0.000000] NUMA: Initialized distance table, cnt=2
[ 0.000000] NUMA: Node 0 [mem 0x00000000-0x0009ffff] + [mem 0x00100000-0xbfffffff] -> [mem 0x00000000-0xbfffffff]
[ 0.000000] NUMA: Node 0 [mem 0x00000000-0xbfffffff] + [mem 0x100000000-0x13fffffff] -> [mem 0x00000000-0x13fffffff]
[ 0.000000] Initmem setup node 0 [mem 0x00000000-0x13fffffff]
[ 0.000000] NODE_DATA [mem 0x13fffb000-0x13fffffff]
[ 0.000000] Initmem setup node 1 [mem 0x140000000-0x17fffffff]
[ 0.000000] NODE_DATA [mem 0x17fff8000-0x17fffcfff]
[ 0.000000] [ffffea0000000000-ffffea00045fffff] PMD -> [ffff88013be00000-ffff88013f5fffff] on node 0
[ 0.000000] [ffffea0004600000-ffffea00053fffff] PMD -> [ffff88017e600000-ffff88017f3fffff] on node 1
[ 0.000000] Zone ranges:
[ 0.000000] DMA [mem 0x00001000-0x00ffffff]
[ 0.000000] DMA32 [mem 0x01000000-0xffffffff]
[ 0.000000] Normal [mem 0x100000000-0x17fffffff]
[ 0.000000] Movable zone start for each node
[ 0.000000] Early memory node ranges
[ 0.000000] node 0: [mem 0x00001000-0x0009efff]
[ 0.000000] node 0: [mem 0x00100000-0xbff99fff]
[ 0.000000] node 0: [mem 0x100000000-0x13fffffff]
[ 0.000000] node 1: [mem 0x140000000-0x17fffffff]
[ 0.000000] On node 0 totalpages: 1048376
[ 0.000000] DMA zone: 56 pages used for memmap
[ 0.000000] DMA zone: 21 pages reserved
[ 0.000000] DMA zone: 3998 pages, LIFO batch:0
[ 0.000000] DMA32 zone: 10695 pages used for memmap
[ 0.000000] DMA32 zone: 782234 pages, LIFO batch:31
[ 0.000000] Normal zone: 3584 pages used for memmap
[ 0.000000] Normal zone: 262144 pages, LIFO batch:31
[ 0.000000] On node 1 totalpages: 262144
[ 0.000000] Normal zone: 3584 pages used for memmap
[ 0.000000] Normal zone: 262144 pages, LIFO batch:31
[ 0.000000] ACPI: PM-Timer IO Port: 0x2008
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x04] enabled)
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
[ 0.000000] ACPI: IOAPIC (id[0x18] address[0xfec00000] gsi_base[0])
[ 0.000000] IOAPIC[0]: apic_id 24, version 17, address 0xfec00000, GSI 0-23
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 14 global_irq 14 high edge)
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 15 global_irq 15 high edge)
[ 0.000000] ACPI: IRQ9 used by override.
[ 0.000000] ACPI: IRQ14 used by override.
[ 0.000000] ACPI: IRQ15 used by override.
[ 0.000000] Using ACPI (MADT) for SMP configuration information
[ 0.000000] ACPI: HPET id: 0x10de8201 base: 0xfed00000
[ 0.000000] smpboot: Allowing 2 CPUs, 0 hotplug CPUs
[ 0.000000] nr_irqs_gsi: 40
[ 0.000000] PM: Registered nosave memory: [mem 0x0009f000-0x0009ffff]
[ 0.000000] PM: Registered nosave memory: [mem 0x000a0000-0x000effff]
[ 0.000000] PM: Registered nosave memory: [mem 0x000f0000-0x000fffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xbff9a000-0xcfffffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xd0000000-0xffffffff]
[ 0.000000] e820: [mem 0xd0000000-0xffffffff] available for PCI devices
[ 0.000000] Booting paravirtualized kernel on bare hardware
[ 0.000000] setup_percpu: NR_CPUS:512 nr_cpumask_bits:512 nr_cpu_ids:2 nr_node_ids:2
[ 0.000000] PERCPU: Embedded 27 pages/cpu @ffff88013fc00000 s80896 r8192 d21504 u2097152
[ 0.000000] pcpu-alloc: s80896 r8192 d21504 u2097152 alloc=1*2097152
[ 0.000000] pcpu-alloc: [0] 0 [1] 1
[ 0.000000] Built 2 zonelists in Node order, mobility grouping on. Total pages: 1292580
[ 0.000000] Policy zone: Normal
[ 0.000000] Kernel command line: root=/dev/nfs initrd=initrd-cb-test-tgt-i386 rootfstype=nfs nfsroot=10.100.1.100:/nfsroots/cb-test-tgt-01,v3,hard,nointr,tcp ip=10.100.1.10::10.100.1.1:255.255.255.0:embed-o-matic:eth0:off console=ttyS0,115200n8 consoleblank=0 rw BOOT_IMAGE=vmlinuz-cb-test-tgt-i386
[ 0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes)
[ 0.000000] AGP: Checking aperture...
[ 0.000000] AGP: No AGP bridge found
[ 0.000000] AGP: Node 0: aperture [bus addr 0xe5ea000000-0xe5ebffffff] (32MB)
[ 0.000000] Aperture beyond 4GB. Ignoring.
[ 0.000000] AGP: Your BIOS doesn't leave a aperture memory hole
[ 0.000000] AGP: Please enable the IOMMU option in the BIOS setup
[ 0.000000] AGP: This costs you 64MB of RAM
[ 0.000000] AGP: Mapping aperture over RAM [mem 0xb4000000-0xb7ffffff] (65536KB)
[ 0.000000] PM: Registered nosave memory: [mem 0xb4000000-0xb7ffffff]
[ 0.000000] Memory: 5012856K/5242080K available (5207K kernel code, 946K rwdata, 1832K rodata, 1204K init, 840K bss, 229224K reserved)
[ 0.000000] Hierarchical RCU implementation.
[ 0.000000] RCU dyntick-idle grace-period acceleration is enabled.
[ 0.000000] RCU restricting CPUs from NR_CPUS=512 to nr_cpu_ids=2.
[ 0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=2
[ 0.000000] NR_IRQS:33024 nr_irqs:512 16
[ 0.000000] spurious 8259A interrupt: IRQ7.
[ 0.000000] Console: colour *CGA 80x25
[ 0.000000] console [ttyS0] enabled
[ 0.000000] mempolicy: Disabling automatic NUMA balancing. Configure with numa_balancing= or the kernel.numa_balancing sysctl
[ 0.000000] hpet clockevent registered
[ 0.000000] tsc: Fast TSC calibration using PIT
[ 0.000000] tsc: Detected 1909.662 MHz processor
[ 0.000147] Calibrating delay loop (skipped), value calculated using timer frequency.. 3819.32 BogoMIPS (lpj=7638648)
[ 0.010770] pid_max: default: 32768 minimum: 301
[ 0.015405] ACPI: Core revision 20140424
[ 0.021619] ACPI: All ACPI Tables successfully acquired
[ 0.026942] Security Framework initialized
[ 0.031054] AppArmor: AppArmor disabled by boot time parameter
[ 0.036882] Yama: disabled by default; enable with sysctl kernel.yama.*
[ 0.044320] Dentry cache hash table entries: 1048576 (order: 11, 8388608 bytes)
[ 0.057174] Inode-cache hash table entries: 524288 (order: 10, 4194304 bytes)
[ 0.066867] Mount-cache hash table entries: 16384 (order: 5, 131072 bytes)
[ 0.073759] Mountpoint-cache hash table entries: 16384 (order: 5, 131072 bytes)
[ 0.081572] Initializing cgroup subsys memory
[ 0.085936] Initializing cgroup subsys devices
[ 0.090391] Initializing cgroup subsys freezer
[ 0.094836] Initializing cgroup subsys net_cls
[ 0.099283] Initializing cgroup subsys blkio
[ 0.103563] Initializing cgroup subsys perf_event
[ 0.108272] Initializing cgroup subsys net_prio
[ 0.112842] tseg: 0000000000
[ 0.112852] CPU: Physical Processor ID: 0
[ 0.116865] CPU: Processor Core ID: 0
[ 0.120525] mce: CPU supports 6 MCE banks
[ 0.124539] LVT offset 0 assigned for vector 0xf9
[ 0.129251] Last level iTLB entries: 4KB 512, 2MB 16, 4MB 8
Last level dTLB entries: 4KB 512, 2MB 128, 4MB 64, 1GB 0
tlb_flushall_shift: 6
[ 0.144588] Freeing SMP alternatives memory: 20K (ffffffff81a1b000 - ffffffff81a20000)
[ 0.153597] ftrace: allocating 21614 entries in 85 pages
[ 0.168758] ..TIMER: vector=0x30 apic1=0 pin1=0 apic2=0 pin2=0
[ 0.214259] smpboot: CPU0: Quad-Core AMD Opteron(tm) Processor 8347 (fam: 10, model: 02, stepping: 01)
[ 0.328535] Performance Events: AMD PMU driver.
[ 0.333087] ... version: 0
[ 0.337091] ... bit width: 48
[ 0.341180] ... generic registers: 4
[ 0.345182] ... value mask: 0000ffffffffffff
[ 0.350485] ... max period: 00007fffffffffff
[ 0.355784] ... fixed-purpose events: 0
[ 0.359790] ... event mask: 000000000000000f
[ 0.367297] NMI watchdog: enabled on all CPUs, permanently consumes one hw-PMU counter.
[ 0.375555] x86: Booting SMP configuration:
[ 0.379735] .... node #1, CPUs: #1
[ 0.492513] x86: Booted up 2 nodes, 2 CPUs
[ 0.496798] smpboot: Total of 2 processors activated (7638.91 BogoMIPS)
[ 0.505227] devtmpfs: initialized
[ 0.516361] pinctrl core: initialized pinctrl subsystem
[ 0.521735] NET: Registered protocol family 16
[ 0.526395] cpuidle: using governor ladder
[ 0.530493] cpuidle: using governor menu
[ 0.534424] node 0 link 1: io port [1000, 3fff]
[ 0.534427] TOM: 00000000c0000000 aka 3072M
[ 0.538610] Fam 10h mmconf [mem 0xc0000000-0xcfffffff]
[ 0.538613] node 0 link 1: mmio [fc000000, fc3fffff]
[ 0.538617] node 0 link 1: mmio [f8000000, fbffffff]
[ 0.538619] TOM2: 0000000180000000 aka 6144M
[ 0.542890] bus: [bus 00-05] on node 0 link 1
[ 0.542892] bus: 00 [io 0x0000-0xffff]
[ 0.542894] bus: 00 [mem 0xd0000000-0xffffffff]
[ 0.542895] bus: 00 [mem 0x180000000-0xfcffffffff]
[ 0.542978] ACPI: bus type PCI registered
[ 0.546990] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
[ 0.553562] PCI: Using configuration type 1 for base access
[ 0.559134] PCI: Using configuration type 1 for extended access
[ 0.577209] ACPI: Added _OSI(Module Device)
[ 0.581394] ACPI: Added _OSI(Processor Device)
[ 0.585834] ACPI: Added _OSI(3.0 _SCP Extensions)
[ 0.590538] ACPI: Added _OSI(Processor Aggregator Device)
[ 0.596909] ACPI: Executed 1 blocks of module-level executable AML code
[ 0.605883] ACPI: Interpreter enabled
[ 0.609559] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S2_] (20140424/hwxface-580)
[ 0.618807] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S3_] (20140424/hwxface-580)
[ 0.628044] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S4_] (20140424/hwxface-580)
[ 0.637300] ACPI: (supports S0 S1 S5)
[ 0.640961] ACPI: Using IOAPIC for interrupt routing
[ 0.645969] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
[ 0.670789] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-05])
[ 0.676975] acpi PNP0A03:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI]
[ 0.685178] acpi PNP0A03:00: _OSC: OS now controls [PCIeHotplug PME AER PCIeCapability]
[ 0.715631] acpi PNP0A03:00: host bridge window expanded to [io 0x0000-0x0cf7]; [io 0x03b0-0x03df] ignored
[ 0.725623] PCI host bridge to bus 0000:00
[ 0.729728] pci_bus 0000:00: root bus resource [bus 00-05]
[ 0.735207] pci_bus 0000:00: root bus resource [io 0x0d00-0x3fff]
[ 0.741382] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff]
[ 0.748252] pci_bus 0000:00: root bus resource [mem 0xf8000000-0xfbffffff]
[ 0.755124] pci_bus 0000:00: root bus resource [mem 0xfc000000-0xfc3fffff]
[ 0.761995] pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7]
[ 0.768184] pci 0000:00:00.0: [10de:005e] type 00 class 0x058000
[ 0.768345] pci 0000:00:01.0: [10de:0051] type 00 class 0x060100
[ 0.768353] pci 0000:00:01.0: reg 0x10: [io 0x2c00-0x2c7f]
[ 0.768468] pci 0000:00:01.1: [10de:0052] type 00 class 0x0c0500
[ 0.768479] pci 0000:00:01.1: reg 0x10: [io 0x3000-0x301f]
[ 0.768491] pci 0000:00:01.1: reg 0x20: [io 0x2c80-0x2cbf]
[ 0.768497] pci 0000:00:01.1: reg 0x24: [io 0x2cc0-0x2cff]
[ 0.768515] pci 0000:00:01.1: PME# supported from D3hot D3cold
[ 0.768616] pci 0000:00:02.0: [10de:005a] type 00 class 0x0c0310
[ 0.768626] pci 0000:00:02.0: reg 0x10: [mem 0xfc300000-0xfc300fff]
[ 0.768654] pci 0000:00:02.0: supports D1 D2
[ 0.768657] pci 0000:00:02.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.768701] pci 0000:00:02.0: System wakeup disabled by ACPI
[ 0.774419] pci 0000:00:02.1: [10de:005b] type 00 class 0x0c0320
[ 0.774430] pci 0000:00:02.1: reg 0x10: [mem 0xfc303000-0xfc3030ff]
[ 0.774464] pci 0000:00:02.1: supports D1 D2
[ 0.774466] pci 0000:00:02.1: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.774511] pci 0000:00:02.1: System wakeup disabled by ACPI
[ 0.780226] pci 0000:00:06.0: [10de:0053] type 00 class 0x01018a
[ 0.780243] pci 0000:00:06.0: reg 0x20: [io 0x3020-0x302f]
[ 0.780255] pci 0000:00:06.0: legacy IDE quirk: reg 0x10: [io 0x01f0-0x01f7]
[ 0.787387] pci 0000:00:06.0: legacy IDE quirk: reg 0x14: [io 0x03f6]
[ 0.793910] pci 0000:00:06.0: legacy IDE quirk: reg 0x18: [io 0x0170-0x0177]
[ 0.801040] pci 0000:00:06.0: legacy IDE quirk: reg 0x1c: [io 0x0376]
[ 0.807661] pci 0000:00:07.0: [10de:0054] type 00 class 0x010185
[ 0.807671] pci 0000:00:07.0: reg 0x10: [io 0x3050-0x3057]
[ 0.807676] pci 0000:00:07.0: reg 0x14: [io 0x3070-0x3073]
[ 0.807681] pci 0000:00:07.0: reg 0x18: [io 0x3058-0x305f]
[ 0.807685] pci 0000:00:07.0: reg 0x1c: [io 0x3074-0x3077]
[ 0.807690] pci 0000:00:07.0: reg 0x20: [io 0x3030-0x303f]
[ 0.807695] pci 0000:00:07.0: reg 0x24: [mem 0xfc301000-0xfc301fff]
[ 0.807792] pci 0000:00:08.0: [10de:0055] type 00 class 0x010185
[ 0.807803] pci 0000:00:08.0: reg 0x10: [io 0x3060-0x3067]
[ 0.807808] pci 0000:00:08.0: reg 0x14: [io 0x3078-0x307b]
[ 0.807812] pci 0000:00:08.0: reg 0x18: [io 0x3068-0x306f]
[ 0.807817] pci 0000:00:08.0: reg 0x1c: [io 0x307c-0x307f]
[ 0.807821] pci 0000:00:08.0: reg 0x20: [io 0x3040-0x304f]
[ 0.807826] pci 0000:00:08.0: reg 0x24: [mem 0xfc302000-0xfc302fff]
[ 0.807923] pci 0000:00:09.0: [10de:005c] type 01 class 0x060400
[ 0.807986] pci 0000:00:09.0: System wakeup disabled by ACPI
[ 0.813697] pci 0000:00:0b.0: [10de:005d] type 01 class 0x060400
[ 0.813740] pci 0000:00:0b.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.813785] pci 0000:00:0b.0: System wakeup disabled by ACPI
[ 0.819503] pci 0000:00:0c.0: [10de:005d] type 01 class 0x060400
[ 0.819538] pci 0000:00:0c.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.819586] pci 0000:00:0c.0: System wakeup disabled by ACPI
[ 0.825299] pci 0000:00:0d.0: [10de:005d] type 01 class 0x060400
[ 0.825333] pci 0000:00:0d.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.825381] pci 0000:00:0d.0: System wakeup disabled by ACPI
[ 0.831093] pci 0000:00:0e.0: [10de:005d] type 01 class 0x060400
[ 0.831126] pci 0000:00:0e.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.831172] pci 0000:00:0e.0: System wakeup disabled by ACPI
[ 0.836898] pci 0000:00:18.0: [1022:1200] type 00 class 0x060000
[ 0.837001] pci 0000:00:18.1: [1022:1201] type 00 class 0x060000
[ 0.837099] pci 0000:00:18.2: [1022:1202] type 00 class 0x060000
[ 0.837191] pci 0000:00:18.3: [1022:1203] type 00 class 0x060000
[ 0.837288] pci 0000:00:18.4: [1022:1204] type 00 class 0x060000
[ 0.837383] pci 0000:00:19.0: [1022:1200] type 00 class 0x060000
[ 0.837486] pci 0000:00:19.1: [1022:1201] type 00 class 0x060000
[ 0.837578] pci 0000:00:19.2: [1022:1202] type 00 class 0x060000
[ 0.837672] pci 0000:00:19.3: [1022:1203] type 00 class 0x060000
[ 0.837767] pci 0000:00:19.4: [1022:1204] type 00 class 0x060000
[ 0.837925] pci 0000:01:04.0: [18ca:0020] type 00 class 0x030000
[ 0.837938] pci 0000:01:04.0: reg 0x10: [mem 0xf8000000-0xfbffffff pref]
[ 0.837948] pci 0000:01:04.0: reg 0x14: [mem 0xfc000000-0xfc03ffff]
[ 0.837955] pci 0000:01:04.0: reg 0x18: [io 0x1000-0x107f]
[ 0.837994] pci 0000:01:04.0: supports D1 D2
[ 0.838063] pci 0000:00:09.0: PCI bridge to [bus 01]
[ 0.843027] pci 0000:00:09.0: bridge window [io 0x1000-0x1fff]
[ 0.843030] pci 0000:00:09.0: bridge window [mem 0xfc000000-0xfc0fffff]
[ 0.843034] pci 0000:00:09.0: bridge window [mem 0xf8000000-0xfbffffff pref]
[ 0.843109] pci 0000:02:00.0: [14e4:1659] type 00 class 0x020000
[ 0.843127] pci 0000:02:00.0: reg 0x10: [mem 0xfc100000-0xfc10ffff 64bit]
[ 0.843155] pci 0000:02:00.0: reg 0x30: [mem 0x68400000-0x6840ffff pref]
[ 0.843218] pci 0000:02:00.0: PME# supported from D3hot D3cold
[ 0.843296] pci 0000:02:00.0: disabling ASPM on pre-1.1 PCIe device. You can enable it with 'pcie_aspm=force'
[ 0.853289] pci 0000:00:0b.0: PCI bridge to [bus 02]
[ 0.858248] pci 0000:00:0b.0: bridge window [mem 0xfc100000-0xfc1fffff]
[ 0.858325] pci 0000:03:00.0: [14e4:1659] type 00 class 0x020000
[ 0.858343] pci 0000:03:00.0: reg 0x10: [mem 0xfc200000-0xfc20ffff 64bit]
[ 0.858429] pci 0000:03:00.0: PME# supported from D3hot D3cold
[ 0.858506] pci 0000:03:00.0: disabling ASPM on pre-1.1 PCIe device. You can enable it with 'pcie_aspm=force'
[ 0.868502] pci 0000:00:0c.0: PCI bridge to [bus 03]
[ 0.873462] pci 0000:00:0c.0: bridge window [mem 0xfc200000-0xfc2fffff]
[ 0.873523] pci 0000:00:0d.0: PCI bridge to [bus 04]
[ 0.878543] pci 0000:00:0e.0: PCI bridge to [bus 05]
[ 0.883520] pci_bus 0000:00: on NUMA node 0
[ 0.883623] ACPI: PCI Interrupt Link [LNKA] (IRQs *16 17 18 19)
[ 0.889736] ACPI: PCI Interrupt Link [LNKB] (IRQs 16 *17 18 19)
[ 0.895850] ACPI: PCI Interrupt Link [LNKC] (IRQs 16 17 18 19) *0, disabled.
[ 0.903117] ACPI: PCI Interrupt Link [LNKD] (IRQs 16 17 18 19) *0, disabled.
[ 0.910385] ACPI: PCI Interrupt Link [LNKE] (IRQs 16 17 18 19) *0, disabled.
[ 0.917663] ACPI: PCI Interrupt Link [LLAS] (IRQs 20 21 22 23) *0, disabled.
[ 0.924928] ACPI: PCI Interrupt Link [LUOH] (IRQs 20 21 22 *23)
[ 0.931025] ACPI: PCI Interrupt Link [LUEH] (IRQs 20 21 *22 23)
[ 0.937140] ACPI: PCI Interrupt Link [LAUD] (IRQs 20 21 22 23) *0, disabled.
[ 0.944409] ACPI: PCI Interrupt Link [LMOD] (IRQs 20 21 22 23) *0, disabled.
[ 0.951676] ACPI: PCI Interrupt Link [LPA0] (IRQs 20 21 22 23) *0, disabled.
[ 0.958945] ACPI: PCI Interrupt Link [LSA0] (IRQs 20 *21 22 23)
[ 0.965041] ACPI: PCI Interrupt Link [LSA1] (IRQs *20 21 22 23)
[ 0.971151] ACPI: PCI Interrupt Link [LEMA] (IRQs 20 21 22 23) *0, disabled.
[ 0.978411] ACPI: PCI Interrupt Link [LUB0] (IRQs 20 21 22 23) *0, disabled.
[ 0.985683] ACPI: PCI Interrupt Link [LUB2] (IRQs 20 21 22 23) *0, disabled.
[ 0.992954] ACPI: PCI Interrupt Link [LKSM] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled.
[ 1.001452] ACPI: PCI Interrupt Link [LNIA] (IRQs 16) *0, disabled.
[ 1.007893] ACPI: PCI Interrupt Link [LNIB] (IRQs 17) *0, disabled.
[ 1.014331] ACPI: PCI Interrupt Link [LNIC] (IRQs 18) *0, disabled.
[ 1.020769] ACPI: PCI Interrupt Link [LNND] (IRQs 19) *0, disabled.
[ 1.027511] ACPI: Enabled 1 GPEs in block 00 to 1F
[ 1.032578] vgaarb: setting as boot device: PCI:0000:01:04.0
[ 1.038234] vgaarb: device added: PCI:0000:01:04.0,decodes=io+mem,owns=io+mem,locks=none
[ 1.046321] vgaarb: loaded
[ 1.049029] vgaarb: bridge control possible 0000:01:04.0
[ 1.054491] PCI: Using ACPI for IRQ routing
[ 1.058675] PCI: pci_cache_line_size set to 64 bytes
[ 1.058731] e820: reserve RAM buffer [mem 0x0009fc00-0x0009ffff]
[ 1.058735] e820: reserve RAM buffer [mem 0xbff9a000-0xbfffffff]
[ 1.059028] HPET: 3 timers in total, 0 timers will be used for per-cpu timer
[ 1.066076] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 31
[ 1.071103] hpet0: 3 comparators, 32-bit 25.000000 MHz counter
[ 1.079145] Switched to clocksource hpet
[ 1.094772] pnp: PnP ACPI init
[ 1.097874] ACPI: bus type PNP registered
[ 1.102391] pnp 00:00: Plug and Play ACPI device, IDs PNP0303 PNP030b (active)
[ 1.102477] pnp 00:01: Plug and Play ACPI device, IDs PNP0f03 PNP0f13 (active)
[ 1.102556] pnp 00:02: Plug and Play ACPI device, IDs PNP0501 (active)
[ 1.102629] pnp 00:03: Plug and Play ACPI device, IDs PNP0501 (active)
[ 1.102664] pnp 00:04: [dma 2]
[ 1.102699] pnp 00:04: Plug and Play ACPI device, IDs PNP0700 (active)
[ 1.102730] pnp: PnP ACPI: found 5 devices
[ 1.106827] ACPI: bus type PNP unregistered
[ 1.117999] pci 0000:02:00.0: can't claim BAR 6 [mem 0x68400000-0x6840ffff pref]: no compatible bridge window
[ 1.127947] pci 0000:00:09.0: PCI bridge to [bus 01]
[ 1.132915] pci 0000:00:09.0: bridge window [io 0x1000-0x1fff]
[ 1.139005] pci 0000:00:09.0: bridge window [mem 0xfc000000-0xfc0fffff]
[ 1.145788] pci 0000:00:09.0: bridge window [mem 0xf8000000-0xfbffffff pref]
[ 1.153014] pci 0000:02:00.0: BAR 6: assigned [mem 0xfc110000-0xfc11ffff pref]
[ 1.160241] pci 0000:00:0b.0: PCI bridge to [bus 02]
[ 1.165202] pci 0000:00:0b.0: bridge window [mem 0xfc100000-0xfc1fffff]
[ 1.171989] pci 0000:00:0c.0: PCI bridge to [bus 03]
[ 1.176952] pci 0000:00:0c.0: bridge window [mem 0xfc200000-0xfc2fffff]
[ 1.183737] pci 0000:00:0d.0: PCI bridge to [bus 04]
[ 1.188702] pci 0000:00:0e.0: PCI bridge to [bus 05]
[ 1.193667] pci_bus 0000:00: resource 4 [io 0x0d00-0x3fff]
[ 1.193670] pci_bus 0000:00: resource 5 [mem 0x000a0000-0x000bffff]
[ 1.193673] pci_bus 0000:00: resource 6 [mem 0xf8000000-0xfbffffff]
[ 1.193675] pci_bus 0000:00: resource 7 [mem 0xfc000000-0xfc3fffff]
[ 1.193677] pci_bus 0000:00: resource 8 [io 0x0000-0x0cf7]
[ 1.193680] pci_bus 0000:01: resource 0 [io 0x1000-0x1fff]
[ 1.193683] pci_bus 0000:01: resource 1 [mem 0xfc000000-0xfc0fffff]
[ 1.193685] pci_bus 0000:01: resource 2 [mem 0xf8000000-0xfbffffff pref]
[ 1.193688] pci_bus 0000:02: resource 1 [mem 0xfc100000-0xfc1fffff]
[ 1.193691] pci_bus 0000:03: resource 1 [mem 0xfc200000-0xfc2fffff]
[ 1.193770] NET: Registered protocol family 2
[ 1.198512] TCP established hash table entries: 65536 (order: 7, 524288 bytes)
[ 1.206161] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
[ 1.213492] TCP: Hash tables configured (established 65536 bind 65536)
[ 1.220094] TCP: reno registered
[ 1.223342] UDP hash table entries: 4096 (order: 5, 131072 bytes)
[ 1.229554] UDP-Lite hash table entries: 4096 (order: 5, 131072 bytes)
[ 1.236294] NET: Registered protocol family 1
[ 1.241032] ACPI: PCI Interrupt Link [LUB0] enabled at IRQ 23
[ 1.247101] ACPI: PCI Interrupt Link [LUB2] enabled at IRQ 22
[ 1.252991] pci 0000:00:00.0: Found enabled HT MSI Mapping
[ 1.258516] pci 0000:00:00.0: Found enabled HT MSI Mapping
[ 1.264008] pci 0000:00:0b.0: Found disabled HT MSI Mapping
[ 1.269582] pci 0000:00:00.0: Found enabled HT MSI Mapping
[ 1.275108] pci 0000:00:00.0: Found enabled HT MSI Mapping
[ 1.280598] pci 0000:00:0c.0: Found disabled HT MSI Mapping
[ 1.286169] pci 0000:00:00.0: Found enabled HT MSI Mapping
[ 1.291699] pci 0000:00:00.0: Found enabled HT MSI Mapping
[ 1.297189] pci 0000:00:0d.0: Found disabled HT MSI Mapping
[ 1.302760] pci 0000:00:00.0: Found enabled HT MSI Mapping
[ 1.308286] pci 0000:00:00.0: Found enabled HT MSI Mapping
[ 1.313771] pci 0000:00:0e.0: Found disabled HT MSI Mapping
[ 1.319345] pci 0000:00:00.0: Found enabled HT MSI Mapping
[ 1.324861] pci 0000:01:04.0: Video device with shadowed ROM
[ 1.324870] PCI: CLS 64 bytes, default 64
[ 1.324970] Unpacking initramfs...
[ 1.703099] Freeing initrd memory: 14028K (ffff88007f24c000 - ffff88007ffff000)
[ 1.711005] PCI-DMA: Disabling AGP.
[ 1.714634] PCI-DMA: aperture base @ b4000000 size 65536 KB
[ 1.720214] PCI-DMA: using GART IOMMU.
[ 1.723976] PCI-DMA: Reserving 64MB of IOMMU area in the AGP aperture
[ 1.735827] platform rtc_cmos: registered platform RTC device (no PNP device found)
[ 1.743650] microcode: CPU0: patch_level=0x01000084
[ 1.748540] microcode: CPU1: patch_level=0x01000084
[ 1.753538] microcode: Microcode Update Driver: v2.00 <tigran@aivazian.fsnet.co.uk>, Peter Oruba
[ 1.762327] LVT offset 1 assigned for vector 0x400
[ 1.767129] IBS: LVT offset 1 assigned
[ 1.770901] perf: AMD IBS detected (0x00000007)
[ 1.775891] futex hash table entries: 512 (order: 3, 32768 bytes)
[ 1.782040] audit: initializing netlink subsys (disabled)
[ 1.787466] audit: type=2000 audit(1489536567.528:1): initialized
[ 1.794311] HugeTLB registered 2 MB page size, pre-allocated 0 pages
[ 1.800716] zbud: loaded
[ 1.803493] VFS: Disk quotas dquot_6.5.2
[ 1.807441] Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[ 1.813973] msgmni has been set to 9946
[ 1.818321] alg: No test for stdrng (krng)
[ 1.822476] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252)
[ 1.829937] io scheduler noop registered
[ 1.833882] io scheduler deadline registered
[ 1.838226] io scheduler cfq registered (default)
[ 1.843131] pcieport 0000:00:0b.0: irq 40 for MSI/MSI-X
[ 1.843256] pcieport 0000:00:0c.0: irq 41 for MSI/MSI-X
[ 1.843366] pcieport 0000:00:0d.0: irq 42 for MSI/MSI-X
[ 1.843473] pcieport 0000:00:0e.0: irq 43 for MSI/MSI-X
[ 1.843627] aer 0000:00:0b.0:pcie02: service driver aer loaded
[ 1.843654] aer 0000:00:0c.0:pcie02: service driver aer loaded
[ 1.843682] aer 0000:00:0d.0:pcie02: service driver aer loaded
[ 1.843708] aer 0000:00:0e.0:pcie02: service driver aer loaded
[ 1.843730] pcieport 0000:00:0b.0: Signaling PME through PCIe PME interrupt
[ 1.850693] pci 0000:02:00.0: Signaling PME through PCIe PME interrupt
[ 1.857214] pcie_pme 0000:00:0b.0:pcie01: service driver pcie_pme loaded
[ 1.857224] pcieport 0000:00:0c.0: Signaling PME through PCIe PME interrupt
[ 1.864179] pci 0000:03:00.0: Signaling PME through PCIe PME interrupt
[ 1.870704] pcie_pme 0000:00:0c.0:pcie01: service driver pcie_pme loaded
[ 1.870714] pcieport 0000:00:0d.0: Signaling PME through PCIe PME interrupt
[ 1.877670] pcie_pme 0000:00:0d.0:pcie01: service driver pcie_pme loaded
[ 1.877679] pcieport 0000:00:0e.0: Signaling PME through PCIe PME interrupt
[ 1.884634] pcie_pme 0000:00:0e.0:pcie01: service driver pcie_pme loaded
[ 1.884666] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[ 1.890267] pciehp: PCI Express Hot Plug Controller Driver version: 0.4
[ 1.896977] GHES: HEST is not enabled!
[ 1.900867] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
[ 1.927455] 00:02: ttyS0 at I/O 0x3f8 (irq = 4, base_baud = 115200) is a 16550A
[ 1.955110] 00:03: ttyS1 at I/O 0x2f8 (irq = 3, base_baud = 115200) is a 16550A
[ 1.962983] Linux agpgart interface v0.103
[ 1.967233] i8042: PNP: PS/2 Controller [PNP0303:KBD,PNP0f03:MOU] at 0x60,0x64 irq 1,12
[ 1.977425] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 1.982392] serio: i8042 AUX port at 0x60,0x64 irq 12
[ 1.987625] mousedev: PS/2 mouse device common for all mice
[ 1.993304] rtc_cmos rtc_cmos: RTC can wake from S4
[ 1.998354] rtc_cmos rtc_cmos: rtc core: registered rtc_cmos as rtc0
[ 2.004746] rtc_cmos rtc_cmos: alarms up to one year, y3k, 114 bytes nvram, hpet irqs
[ 2.012605] ledtrig-cpu: registered to indicate activity on CPUs
[ 2.018794] AMD IOMMUv2 driver by Joerg Roedel <joerg.roedel@amd.com>
[ 2.025231] AMD IOMMUv2 functionality not available on this system
[ 2.031556] TCP: cubic registered
[ 2.034962] NET: Registered protocol family 10
[ 2.039809] mip6: Mobile IPv6
[ 2.042781] NET: Registered protocol family 17
[ 2.047248] mpls_gso: MPLS GSO support
[ 2.047310] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input0
[ 2.060078] registered taskstats version 1
[ 2.064973] rtc_cmos rtc_cmos: setting system clock to 2017-03-15 00:09:29 UTC (1489536569)
[ 2.073394] PM: Hibernation image not present or could not be loaded.
[ 2.075310] Freeing unused kernel memory: 1204K (ffffffff818ee000 - ffffffff81a1b000)
[ 2.083139] Write protecting the kernel read-only data: 8192k
[ 2.092330] Freeing unused kernel memory: 924K (ffff880001519000 - ffff880001600000)
[ 2.100888] Freeing unused kernel memory: 216K (ffff8800017ca000 - ffff880001800000)
[ 2.132925] systemd-udevd[63]: starting version 215
[ 2.138654] random: systemd-udevd urandom read with 3 bits of entropy available
[ 2.178037] ACPI: bus type USB registered
[ 2.182920] usbcore: registered new interface driver usbfs
[ 2.189180] FDC 0 is a post-1991 82077
[ 2.198295] SCSI subsystem initialized
[ 2.205625] usbcore: registered new interface driver hub
[ 2.211862] pps_core: LinuxPPS API ver. 1 registered
[ 2.216932] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it>
[ 2.228735] PTP clock support registered
[ 2.237216] libata version 3.00 loaded.
[ 2.238097] sata_nv 0000:00:07.0: version 3.5
[ 2.238362] ACPI: PCI Interrupt Link [LSA0] enabled at IRQ 21
[ 2.244998] usbcore: registered new device driver usb
[ 2.251488] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 2.258385] tg3.c:v3.137 (May 11, 2014)
[ 2.262243] tg3 0000:02:00.0: enabling device (0004 -> 0006)
[ 2.268452] ehci-pci: EHCI PCI platform driver
[ 2.272963] scsi0 : sata_nv
[ 2.276142] ACPI: PCI Interrupt Link [LNIB] enabled at IRQ 17
[ 2.276164] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[ 2.288516] scsi1 : sata_nv
[ 2.291403] ata1: SATA max UDMA/133 cmd 0x3050 ctl 0x3070 bmdma 0x3030 irq 21
[ 2.298539] ata2: SATA max UDMA/133 cmd 0x3058 ctl 0x3074 bmdma 0x3038 irq 21
[ 2.305962] ACPI: PCI Interrupt Link [LSA1] enabled at IRQ 20
[ 2.312141] scsi2 : sata_nv
[ 2.315087] scsi3 : sata_nv
[ 2.317948] ata3: SATA max UDMA/133 cmd 0x3060 ctl 0x3078 bmdma 0x3040 irq 20
[ 2.325080] ata4: SATA max UDMA/133 cmd 0x3068 ctl 0x307c bmdma 0x3048 irq 20
[ 2.333165] pata_amd 0000:00:06.0: version 0.4.1
[ 2.333678] scsi4 : pata_amd
[ 2.336735] scsi5 : pata_amd
[ 2.339825] ata5: PATA max UDMA/133 cmd 0x1f0 ctl 0x3f6 bmdma 0x3020 irq 14
[ 2.346782] ata6: PATA max UDMA/133 cmd 0x170 ctl 0x376 bmdma 0x3028 irq 15
[ 2.354275] ehci-pci 0000:00:02.1: EHCI Host Controller
[ 2.359522] ehci-pci 0000:00:02.1: new USB bus registered, assigned bus number 1
[ 2.366951] ehci-pci 0000:00:02.1: debug port 1
[ 2.371538] ehci-pci 0000:00:02.1: cache line size of 64 is not supported
[ 2.371579] ehci-pci 0000:00:02.1: irq 22, io mem 0xfc303000
[ 2.382783] tg3 0000:02:00.0 eth0: Tigon3 [partno(BCM95721) rev 4201] (PCI Express) MAC address 00:1e:8c:51:61:a2
[ 2.393040] tg3 0000:02:00.0 eth0: attached PHY is 5750 (10/100/1000Base-T Ethernet) (WireSpeed[1], EEE[0])
[ 2.402764] tg3 0000:02:00.0 eth0: RXcsums[1] LinkChgREG[0] MIirq[0] ASF[0] TSOcap[1]
[ 2.410589] tg3 0000:02:00.0 eth0: dma_rwctrl[76180000] dma_mask[64-bit]
[ 2.417340] ehci-pci 0000:00:02.1: USB 2.0 started, EHCI 1.00
[ 2.423161] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
[ 2.429943] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 2.437160] usb usb1: Product: EHCI Host Controller
[ 2.442036] usb usb1: Manufacturer: Linux 3.16.0-4-amd64 ehci_hcd
[ 2.448127] usb usb1: SerialNumber: 0000:00:02.1
[ 2.452770] tg3 0000:03:00.0: enabling device (0004 -> 0006)
[ 2.458564] ACPI: PCI Interrupt Link [LNIA] enabled at IRQ 16
[ 2.464455] hub 1-0:1.0: USB hub found
[ 2.468217] hub 1-0:1.0: 10 ports detected
[ 2.473332] ohci-pci: OHCI PCI platform driver
[ 2.477908] ohci-pci 0000:00:02.0: OHCI PCI host controller
[ 2.483489] ohci-pci 0000:00:02.0: new USB bus registered, assigned bus number 2
[ 2.490930] ohci-pci 0000:00:02.0: irq 23, io mem 0xfc300000
[ 2.530200] tg3 0000:03:00.0 eth1: Tigon3 [partno(BCM95721) rev 4201] (PCI Express) MAC address 00:1e:8c:51:63:95
[ 2.540453] tg3 0000:03:00.0 eth1: attached PHY is 5750 (10/100/1000Base-T Ethernet) (WireSpeed[1], EEE[0])
[ 2.550188] tg3 0000:03:00.0 eth1: RXcsums[1] LinkChgREG[0] MIirq[0] ASF[0] TSOcap[1]
[ 2.558009] tg3 0000:03:00.0 eth1: dma_rwctrl[76180000] dma_mask[64-bit]
[ 2.560736] usb usb2: New USB device found, idVendor=1d6b, idProduct=0001
[ 2.560739] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 2.560740] usb usb2: Product: OHCI PCI host controller
[ 2.560742] usb usb2: Manufacturer: Linux 3.16.0-4-amd64 ohci_hcd
[ 2.560743] usb usb2: SerialNumber: 0000:00:02.0
[ 2.561027] hub 2-0:1.0: USB hub found
[ 2.561105] hub 2-0:1.0: 10 ports detected
[ 2.614647] ata1: SATA link down (SStatus 0 SControl 300)
[ 2.646618] ata3: SATA link down (SStatus 0 SControl 300)
[ 2.734590] tsc: Refined TSC clocksource calibration: 1909.786 MHz
[ 2.930517] ata2: SATA link down (SStatus 0 SControl 300)
[ 3.246407] ata4: SATA link down (SStatus 0 SControl 300)
[ 3.432643] FS-Cache: Loaded
[ 3.441382] RPC: Registered named UNIX socket transport module.
[ 3.448286] RPC: Registered udp transport module.
[ 3.454356] RPC: Registered tcp transport module.
[ 3.460439] RPC: Registered tcp NFSv4.1 backchannel transport module.
[ 3.474429] FS-Cache: Netfs 'nfs' registered for caching
[ 3.487555] tg3 0000:02:00.0: irq 44 for MSI/MSI-X
[ 3.534428] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 3.738312] Switched to clocksource tsc
[ 6.293008] tg3 0000:02:00.0 eth0: Link is up at 1000 Mbps, full duplex
[ 6.299619] tg3 0000:02:00.0 eth0: Flow control is on for TX and on for RX
[ 6.306501] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
[ 6.802471] systemd[1]: systemd 215 running in system mode. (+PAM +AUDIT +SELINUX +IMA +SYSVINIT +LIBCRYPTSETUP +GCRYPT +ACL +XZ -SECCOMP -APPARMOR)
[ 6.815993] systemd[1]: Detected architecture 'x86-64'.
[ 6.861553] systemd[1]: Inserted module 'autofs4'
[ 6.867580] systemd[1]: Set hostname to <cb-test-tgt>.
[ 7.038476] systemd[1]: Cannot add dependency job for unit dbus.socket, ignoring: Unit dbus.socket failed to load: No such file or directory.
[ 7.051206] systemd[1]: Cannot add dependency job for unit display-manager.service, ignoring: Unit display-manager.service failed to load: No such file or directory.
[ 7.066565] systemd[1]: Expecting device dev-ttyS0.device...
[ 7.081137] systemd[1]: Starting Forward Password Requests to Wall Directory Watch.
[ 7.088864] systemd[1]: Started Forward Password Requests to Wall Directory Watch.
[ 7.096455] systemd[1]: Starting Remote File Systems (Pre).
[ 7.113102] systemd[1]: Reached target Remote File Systems (Pre).
[ 7.119212] systemd[1]: Starting Encrypted Volumes.
[ 7.133091] systemd[1]: Reached target Encrypted Volumes.
[ 7.138534] systemd[1]: Starting Arbitrary Executable File Formats File System Automount Point.
[ 7.161087] systemd[1]: Set up automount Arbitrary Executable File Formats File System Automount Point.
[ 7.170498] systemd[1]: Starting Dispatch Password Requests to Console Directory Watch.
[ 7.178540] systemd[1]: Started Dispatch Password Requests to Console Directory Watch.
[ 7.186472] systemd[1]: Starting Paths.
[ 7.201069] systemd[1]: Reached target Paths.
[ 7.205450] systemd[1]: Starting Swap.
[ 7.217059] systemd[1]: Reached target Swap.
[ 7.221346] systemd[1]: Starting Root Slice.
[ 7.233056] systemd[1]: Created slice Root Slice.
[ 7.237786] systemd[1]: Starting User and Session Slice.
[ 7.253053] systemd[1]: Created slice User and Session Slice.
[ 7.258812] systemd[1]: Starting Delayed Shutdown Socket.
[ 7.273045] systemd[1]: Listening on Delayed Shutdown Socket.
[ 7.278811] systemd[1]: Starting /dev/initctl Compatibility Named Pipe.
[ 7.297038] systemd[1]: Listening on /dev/initctl Compatibility Named Pipe.
[ 7.304009] systemd[1]: Starting Journal Socket (/dev/log).
[ 7.321029] systemd[1]: Listening on Journal Socket (/dev/log).
[ 7.326973] systemd[1]: Starting udev Kernel Socket.
[ 7.341019] systemd[1]: Listening on udev Kernel Socket.
[ 7.346355] systemd[1]: Starting udev Control Socket.
[ 7.361012] systemd[1]: Listening on udev Control Socket.
[ 7.366435] systemd[1]: Starting Journal Socket.
[ 7.381004] systemd[1]: Listening on Journal Socket.
[ 7.386003] systemd[1]: Starting System Slice.
[ 7.401003] systemd[1]: Created slice System Slice.
[ 7.405901] systemd[1]: Starting system-getty.slice.
[ 7.420991] systemd[1]: Created slice system-getty.slice.
[ 7.426403] systemd[1]: Starting system-serial\x2dgetty.slice.
[ 7.440988] systemd[1]: Created slice system-serial\x2dgetty.slice.
[ 7.447297] systemd[1]: Starting Increase datagram queue length...
[ 7.465723] systemd[1]: Starting udev Coldplug all Devices...
[ 7.501041] systemd[1]: Starting Load Kernel Modules...
[ 7.520559] systemd[1]: Started Set Up Additional Binary Formats.
[ 7.527010] systemd[1]: Mounting Debug File System...
[ 7.542225] systemd[1]: Starting Create list of required static device nodes for the current kernel...
[ 7.565845] systemd[1]: Mounting POSIX Message Queue File System...
[ 7.581870] systemd[1]: Mounting Huge Pages File System...
[ 7.597668] systemd[1]: Starting Slices.
[ 7.608999] systemd[1]: Reached target Slices.
[ 7.613523] systemd[1]: Starting Remount Root and Kernel File Systems...
[ 7.645006] systemd[1]: Mounted Huge Pages File System.
[ 7.660920] systemd[1]: Mounted POSIX Message Queue File System.
[ 7.676906] systemd[1]: Mounted Debug File System.
[ 7.692902] systemd[1]: Started Increase datagram queue length.
[ 7.709022] systemd[1]: Started Load Kernel Modules.
[ 7.728914] systemd[1]: Started Create list of required static device nodes for the current kernel.
[ 7.752952] systemd[1]: Started Remount Root and Kernel File Systems.
[ 7.768907] systemd[1]: Started udev Coldplug all Devices.
[ 7.815522] systemd[1]: Started Various fixups to make systemd work better on Debian.
[ 7.823401] systemd[1]: Starting Load/Save Random Seed...
[ 7.837902] systemd[1]: Starting Create Static Device Nodes in /dev...
[ 7.853676] systemd[1]: Starting Apply Kernel Variables...
[ 7.869825] systemd[1]: Mounted Configuration File System.
[ 7.875504] systemd[1]: Mounted FUSE Control File System.
[ 7.881099] systemd[1]: Starting Syslog Socket.
[ 7.896907] systemd[1]: Listening on Syslog Socket.
[ 7.901864] systemd[1]: Starting Sockets.
[ 7.912928] systemd[1]: Reached target Sockets.
[ 7.917552] systemd[1]: Starting Journal Service...
[ 7.940940] systemd[1]: Started Journal Service.
[ 8.016135] systemd-udevd[161]: starting version 215
[ 8.125878] systemd-journald[160]: Received request to flush runtime journal from PID 1
[ 8.185647] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[ 8.198641] acpi-cpufreq: overriding BIOS provided _PSD data
[ 8.206560] i2c i2c-0: nForce2 SMBus adapter at 0x2c80
[ 8.213776] i2c i2c-1: nForce2 SMBus adapter at 0x2cc0
[ 8.222172] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input2
[ 8.231094] ACPI: Power Button [PWRB]
[ 8.235748] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input3
[ 8.246664] ACPI: Power Button [PWRF]
[ 8.283150] k10temp 0000:00:18.3: unreliable CPU thermal sensor; monitoring disabled
[ 8.297416] k10temp 0000:00:19.3: unreliable CPU thermal sensor; monitoring disabled
[ 8.306075] EDAC MC: Ver: 3.0.0
[ 8.311474] input: PC Speaker as /devices/platform/pcspkr/input/input4
[ 8.338270] MCE: In-kernel MCE decoding enabled.
[ 8.343502] kvm: Nested Virtualization enabled
[ 8.349158] kvm: Nested Paging enabled
[ 8.354598] AMD64 EDAC driver v3.4.0
[ 8.358511] EDAC amd64: DRAM ECC enabled.
[ 8.363704] EDAC amd64: F10h detected (node 0).
[ 8.368276] EDAC MC: DCT0 chip selects:
[ 8.368279] EDAC amd64: MC: 0: 0MB 1: 0MB
[ 8.373017] EDAC amd64: MC: 2: 0MB 3: 0MB
[ 8.377731] EDAC amd64: MC: 4: 0MB 5: 0MB
[ 8.382490] EDAC amd64: MC: 6: 2048MB 7: 2048MB
[ 8.387198] EDAC MC: DCT1 chip selects:
[ 8.387199] EDAC amd64: MC: 0: 0MB 1: 0MB
[ 8.391916] EDAC amd64: MC: 2: 0MB 3: 0MB
[ 8.396626] EDAC amd64: MC: 4: 0MB 5: 0MB
[ 8.401345] EDAC amd64: MC: 6: 1024MB 7: 1024MB
[ 8.406048] EDAC amd64: using x4 syndromes.
[ 8.412918] EDAC amd64: CS6: Registered DDR2 RAM
[ 8.417552] EDAC amd64: CS7: Registered DDR2 RAM
[ 8.422478] EDAC MC0: Giving out device to module amd64_edac controller F10h: DEV 0000:00:18.2 (INTERRUPT)
[ 8.432520] EDAC amd64: DRAM ECC enabled.
[ 8.437067] EDAC amd64: F10h detected (node 1).
[ 8.441658] EDAC MC: DCT0 chip selects:
[ 8.441660] EDAC amd64: MC: 0: 1024MB 1: 0MB
[ 8.446376] EDAC amd64: MC: 2: 0MB 3: 0MB
[ 8.451094] EDAC amd64: MC: 4: 0MB 5: 0MB
[ 8.455810] EDAC amd64: MC: 6: 0MB 7: 0MB
[ 8.460520] EDAC MC: DCT1 chip selects:
[ 8.460522] EDAC amd64: MC: 0: 0MB 1: 0MB
[ 8.465232] EDAC amd64: MC: 2: 0MB 3: 0MB
[ 8.469947] EDAC amd64: MC: 4: 0MB 5: 0MB
[ 8.474660] EDAC amd64: MC: 6: 0MB 7: 0MB
[ 8.479374] EDAC amd64: using x4 syndromes.
[ 8.483563] EDAC amd64: MCT channel count: 1
[ 8.488050] EDAC amd64: CS0: Registered DDR2 RAM
[ 8.492835] EDAC MC1: Giving out device to module amd64_edac controller F10h: DEV 0000:00:19.2 (INTERRUPT)
[ 8.502905] EDAC PCI0: Giving out device to module amd64_edac controller EDAC PCI controller: DEV 0000:00:18.2 (POLLED)
[ 8.633850] random: nonblocking pool is initialized
[ 38.773960] *****RAPTOR ENGINEERING AUTOMATED TEST BOOT SUCCESS*****