blob: 1e36e94499f8c2bd19e64ac5a25bb9a71595d521 [file] [log] [blame]
[ 0.000000] Linux version 4.9.0-2-amd64 (debian-kernel@lists.debian.org) (gcc version 6.3.0 20170321 (Debian 6.3.0-11) ) #1 SMP Debian 4.9.18-1 (2017-03-30)
[ 0.000000] Command line: BOOT_IMAGE=/vmlinuz-4.9.0-2-amd64 root=UUID=f545d1ea-3103-4100-8a85-54db5c9634ad ro quiet iomem=relaxed
[ 0.000000] x86/fpu: Supporting XSAVE feature 0x001: 'x87 floating point registers'
[ 0.000000] x86/fpu: Supporting XSAVE feature 0x002: 'SSE registers'
[ 0.000000] x86/fpu: Supporting XSAVE feature 0x004: 'AVX registers'
[ 0.000000] x86/fpu: xstate_offset[2]: 576, xstate_sizes[2]: 256
[ 0.000000] x86/fpu: Enabled xstate features 0x7, context size is 832 bytes, using 'standard' format.
[ 0.000000] x86/fpu: Using 'eager' FPU context switches.
[ 0.000000] e820: BIOS-provided physical RAM map:
[ 0.000000] BIOS-e820: [mem 0x0000000000000000-0x0000000000000fff] type 16
[ 0.000000] BIOS-e820: [mem 0x0000000000001000-0x000000000009ffff] usable
[ 0.000000] BIOS-e820: [mem 0x00000000000a0000-0x00000000000fffff] reserved
[ 0.000000] BIOS-e820: [mem 0x0000000000100000-0x00000000bff0dfff] usable
[ 0.000000] BIOS-e820: [mem 0x00000000bff0e000-0x00000000bfffffff] type 16
[ 0.000000] BIOS-e820: [mem 0x00000000c0000000-0x00000000ce9fffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000f8000000-0x00000000fbffffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fed40000-0x00000000fed44fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fed90000-0x00000000fed91fff] reserved
[ 0.000000] BIOS-e820: [mem 0x0000000100000000-0x000000042f5fffff] usable
[ 0.000000] NX (Execute Disable) protection: active
[ 0.000000] SMBIOS 2.7 present.
[ 0.000000] DMI: LENOVO 23255A9/23255A9, BIOS CBET4000 4.5-1640-g7e438af995 04/25/2017
[ 0.000000] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
[ 0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable
[ 0.000000] e820: last_pfn = 0x42f600 max_arch_pfn = 0x400000000
[ 0.000000] MTRR default type: write-back
[ 0.000000] MTRR fixed ranges enabled:
[ 0.000000] 00000-9FFFF write-back
[ 0.000000] A0000-BFFFF uncachable
[ 0.000000] C0000-FFFFF write-back
[ 0.000000] MTRR variable ranges enabled:
[ 0.000000] 0 base 0C0000000 mask FE0000000 uncachable
[ 0.000000] 1 base 0E0000000 mask FF0000000 write-combining
[ 0.000000] 2 base 0F0000000 mask FF0000000 uncachable
[ 0.000000] 3 disabled
[ 0.000000] 4 disabled
[ 0.000000] 5 disabled
[ 0.000000] 6 disabled
[ 0.000000] 7 disabled
[ 0.000000] 8 disabled
[ 0.000000] 9 disabled
[ 0.000000] x86/PAT: Configuration [0-7]: WB WC UC- UC WB WC UC- WT
[ 0.000000] e820: last_pfn = 0xbff0e max_arch_pfn = 0x400000000
[ 0.000000] Base memory trampoline at [ffff9880c0099000] 99000 size 24576
[ 0.000000] BRK [0x1d432b000, 0x1d432bfff] PGTABLE
[ 0.000000] BRK [0x1d432c000, 0x1d432cfff] PGTABLE
[ 0.000000] BRK [0x1d432d000, 0x1d432dfff] PGTABLE
[ 0.000000] BRK [0x1d432e000, 0x1d432efff] PGTABLE
[ 0.000000] BRK [0x1d432f000, 0x1d432ffff] PGTABLE
[ 0.000000] BRK [0x1d4330000, 0x1d4330fff] PGTABLE
[ 0.000000] BRK [0x1d4331000, 0x1d4331fff] PGTABLE
[ 0.000000] BRK [0x1d4332000, 0x1d4332fff] PGTABLE
[ 0.000000] RAMDISK: [mem 0x35829000-0x36c0bfff]
[ 0.000000] ACPI: Early table checksum verification disabled
[ 0.000000] ACPI: RSDP 0x00000000000F0000 000024 (v02 CORE )
[ 0.000000] ACPI: XSDT 0x00000000BFF220E0 00005C (v01 CORE COREBOOT 00000000 CORE 00000000)
[ 0.000000] ACPI: FACP 0x00000000BFF256F0 0000F4 (v04 CORE COREBOOT 00000000 CORE 00000000)
[ 0.000000] ACPI: DSDT 0x00000000BFF22280 00346D (v02 COREv4 COREBOOT 20110725 INTL 20161222)
[ 0.000000] ACPI: FACS 0x00000000BFF22240 000040
[ 0.000000] ACPI: FACS 0x00000000BFF22240 000040
[ 0.000000] ACPI: SSDT 0x00000000BFF257F0 00189A (v02 CORE COREBOOT 0000002A CORE 0000002A)
[ 0.000000] ACPI: MCFG 0x00000000BFF27090 00003C (v01 CORE COREBOOT 00000000 CORE 00000000)
[ 0.000000] ACPI: TCPA 0x00000000BFF270D0 000032 (v02 CORE COREBOOT 00000000 CORE 00000000)
[ 0.000000] ACPI: APIC 0x00000000BFF27110 00006C (v01 CORE COREBOOT 00000000 CORE 00000000)
[ 0.000000] ACPI: DMAR 0x00000000BFF27180 0000A8 (v01 CORE COREBOOT 00000000 CORE 00000000)
[ 0.000000] ACPI: HPET 0x00000000BFF27230 000038 (v01 CORE COREBOOT 00000000 CORE 00000000)
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] No NUMA configuration found
[ 0.000000] Faking a node at [mem 0x0000000000000000-0x000000042f5fffff]
[ 0.000000] NODE_DATA(0) allocated [mem 0x42f5ef000-0x42f5f3fff]
[ 0.000000] Zone ranges:
[ 0.000000] DMA [mem 0x0000000000001000-0x0000000000ffffff]
[ 0.000000] DMA32 [mem 0x0000000001000000-0x00000000ffffffff]
[ 0.000000] Normal [mem 0x0000000100000000-0x000000042f5fffff]
[ 0.000000] Device empty
[ 0.000000] Movable zone start for each node
[ 0.000000] Early memory node ranges
[ 0.000000] node 0: [mem 0x0000000000001000-0x000000000009ffff]
[ 0.000000] node 0: [mem 0x0000000000100000-0x00000000bff0dfff]
[ 0.000000] node 0: [mem 0x0000000100000000-0x000000042f5fffff]
[ 0.000000] Initmem setup node 0 [mem 0x0000000000001000-0x000000042f5fffff]
[ 0.000000] On node 0 totalpages: 4125869
[ 0.000000] DMA zone: 64 pages used for memmap
[ 0.000000] DMA zone: 22 pages reserved
[ 0.000000] DMA zone: 3999 pages, LIFO batch:0
[ 0.000000] DMA32 zone: 12221 pages used for memmap
[ 0.000000] DMA32 zone: 782094 pages, LIFO batch:31
[ 0.000000] Normal zone: 52184 pages used for memmap
[ 0.000000] Normal zone: 3339776 pages, LIFO batch:31
[ 0.000000] Reserving Intel graphics memory at 0x00000000c0a00000-0x00000000ce9fffff
[ 0.000000] ACPI: PM-Timer IO Port: 0x508
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-23
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[ 0.000000] ACPI: IRQ0 used by override.
[ 0.000000] ACPI: IRQ9 used by override.
[ 0.000000] Using ACPI (MADT) for SMP configuration information
[ 0.000000] ACPI: HPET id: 0x8086a701 base: 0xfed00000
[ 0.000000] smpboot: Allowing 4 CPUs, 0 hotplug CPUs
[ 0.000000] PM: Registered nosave memory: [mem 0x00000000-0x00000fff]
[ 0.000000] PM: Registered nosave memory: [mem 0x000a0000-0x000fffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xbff0e000-0xbfffffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xc0000000-0xce9fffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xcea00000-0xf7ffffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xf8000000-0xfbffffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfc000000-0xfed3ffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfed40000-0xfed44fff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfed45000-0xfed8ffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfed90000-0xfed91fff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfed92000-0xffffffff]
[ 0.000000] e820: [mem 0xcea00000-0xf7ffffff] available for PCI devices
[ 0.000000] Booting paravirtualized kernel on bare hardware
[ 0.000000] clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645519600211568 ns
[ 0.000000] setup_percpu: NR_CPUS:512 nr_cpumask_bits:512 nr_cpu_ids:4 nr_node_ids:1
[ 0.000000] percpu: Embedded 35 pages/cpu @ffff9884ef200000 s103384 r8192 d31784 u524288
[ 0.000000] pcpu-alloc: s103384 r8192 d31784 u524288 alloc=1*2097152
[ 0.000000] pcpu-alloc: [0] 0 1 2 3
[ 0.000000] Built 1 zonelists in Node order, mobility grouping on. Total pages: 4061378
[ 0.000000] Policy zone: Normal
[ 0.000000] Kernel command line: BOOT_IMAGE=/vmlinuz-4.9.0-2-amd64 root=UUID=f545d1ea-3103-4100-8a85-54db5c9634ad ro quiet iomem=relaxed
[ 0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes)
[ 0.000000] Calgary: detecting Calgary via BIOS EBDA area
[ 0.000000] Calgary: Unable to locate Rio Grande table in EBDA - bailing!
[ 0.000000] Memory: 16142752K/16503476K available (6143K kernel code, 1129K rwdata, 2844K rodata, 1392K init, 684K bss, 360724K reserved, 0K cma-reserved)
[ 0.000000] Hierarchical RCU implementation.
[ 0.000000] Build-time adjustment of leaf fanout to 64.
[ 0.000000] RCU restricting CPUs from NR_CPUS=512 to nr_cpu_ids=4.
[ 0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=64, nr_cpu_ids=4
[ 0.000000] NR_IRQS:33024 nr_irqs:456 16
[ 0.000000] Console: colour dummy device 80x25
[ 0.000000] console [tty0] enabled
[ 0.000000] clocksource: hpet: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 133484882848 ns
[ 0.000000] hpet clockevent registered
[ 0.000000] tsc: Fast TSC calibration using PIT
[ 0.000000] tsc: Detected 2594.001 MHz processor
[ 0.000025] Calibrating delay loop (skipped), value calculated using timer frequency.. 5188.00 BogoMIPS (lpj=10376004)
[ 0.000027] pid_max: default: 32768 minimum: 301
[ 0.000040] ACPI: Core revision 20160831
[ 0.002575] ACPI: 2 ACPI AML tables successfully acquired and loaded
[ 0.002616] Security Framework initialized
[ 0.002617] Yama: disabled by default; enable with sysctl kernel.yama.*
[ 0.002623] AppArmor: AppArmor disabled by boot time parameter
[ 0.003351] Dentry cache hash table entries: 2097152 (order: 12, 16777216 bytes)
[ 0.007072] Inode-cache hash table entries: 1048576 (order: 11, 8388608 bytes)
[ 0.008775] Mount-cache hash table entries: 32768 (order: 6, 262144 bytes)
[ 0.008788] Mountpoint-cache hash table entries: 32768 (order: 6, 262144 bytes)
[ 0.009077] CPU: Physical Processor ID: 0
[ 0.009078] CPU: Processor Core ID: 0
[ 0.009084] mce: CPU supports 7 MCE banks
[ 0.009093] CPU0: Thermal monitoring enabled (TM1)
[ 0.009102] process: using mwait in idle threads
[ 0.009104] Last level iTLB entries: 4KB 512, 2MB 8, 4MB 8
[ 0.009105] Last level dTLB entries: 4KB 512, 2MB 32, 4MB 32, 1GB 0
[ 0.009491] Freeing SMP alternatives memory: 24K (ffffffffb6078000 - ffffffffb607e000)
[ 0.011595] ftrace: allocating 25004 entries in 98 pages
[ 0.022271] smpboot: Max logical packages: 2
[ 0.022275] DMAR: Host address width 36
[ 0.022276] DMAR: DRHD base: 0x000000fed90000 flags: 0x0
[ 0.022284] DMAR: dmar0: reg_base_addr fed90000 ver 1:0 cap c0000020e60262 ecap f0101a
[ 0.022285] DMAR: DRHD base: 0x000000fed91000 flags: 0x1
[ 0.022288] DMAR: dmar1: reg_base_addr fed91000 ver 1:0 cap c9008020660262 ecap f0105a
[ 0.022290] DMAR-IR: IOAPIC id 2 under DRHD base 0xfed91000 IOMMU 1
[ 0.022290] DMAR-IR: HPET id 0 under DRHD base 0xfed91000
[ 0.022291] DMAR-IR: Queued invalidation will be enabled to support x2apic and Intr-remapping.
[ 0.022564] DMAR-IR: Enabled IRQ remapping in x2apic mode
[ 0.022566] x2apic enabled
[ 0.022571] Switched APIC routing to cluster x2apic.
[ 0.023028] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[ 0.062717] TSC deadline timer enabled
[ 0.062720] smpboot: CPU0: Intel(R) Core(TM) i5-3320M CPU @ 2.60GHz (family: 0x6, model: 0x3a, stepping: 0x9)
[ 0.062723] Performance Events: PEBS fmt1+, IvyBridge events, 16-deep LBR, full-width counters, Intel PMU driver.
[ 0.062750] ... version: 3
[ 0.062751] ... bit width: 48
[ 0.062751] ... generic registers: 4
[ 0.062752] ... value mask: 0000ffffffffffff
[ 0.062752] ... max period: 00007fffffffffff
[ 0.062752] ... fixed-purpose events: 3
[ 0.062753] ... event mask: 000000070000000f
[ 0.063292] NMI watchdog: enabled on all CPUs, permanently consumes one hw-PMU counter.
[ 0.063392] x86: Booting SMP configuration:
[ 0.063393] .... node #0, CPUs: #1 #2 #3
[ 0.304844] x86: Booted up 1 node, 4 CPUs
[ 0.304846] smpboot: Total of 4 processors activated (20755.33 BogoMIPS)
[ 0.307997] devtmpfs: initialized
[ 0.308060] x86/mm: Memory block size: 128MB
[ 0.311381] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns
[ 0.311389] futex hash table entries: 1024 (order: 4, 65536 bytes)
[ 0.311429] pinctrl core: initialized pinctrl subsystem
[ 0.311529] NET: Registered protocol family 16
[ 0.327554] cpuidle: using governor ladder
[ 0.339563] cpuidle: using governor menu
[ 0.339611] ACPI: bus type PCI registered
[ 0.339613] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
[ 0.339692] PCI: MMCONFIG for domain 0000 [bus 00-3f] at [mem 0xf8000000-0xfbffffff] (base 0xf8000000)
[ 0.339693] PCI: MMCONFIG at [mem 0xf8000000-0xfbffffff] reserved in E820
[ 0.339701] PCI: Using configuration type 1 for base access
[ 0.339735] core: PMU erratum BJ122, BV98, HSD29 worked around, HT is on
[ 0.355736] HugeTLB registered 2 MB page size, pre-allocated 0 pages
[ 0.355936] ACPI: Added _OSI(Module Device)
[ 0.355937] ACPI: Added _OSI(Processor Device)
[ 0.355938] ACPI: Added _OSI(3.0 _SCP Extensions)
[ 0.355938] ACPI: Added _OSI(Processor Aggregator Device)
[ 0.356068] ACPI: Executed 1 blocks of module-level executable AML code
[ 0.358006] ACPI : EC: EC started
[ 0.358007] ACPI : EC: interrupt blocked
[ 0.358049] ACPI: \_SB_.PCI0.LPCB.EC__: Used as first EC
[ 0.358050] ACPI: \_SB_.PCI0.LPCB.EC__: GPE=0x11, EC_CMD/EC_SC=0x66, EC_DATA=0x62
[ 0.358051] ACPI: \_SB_.PCI0.LPCB.EC__: Used as boot DSDT EC to handle transactions
[ 0.358051] ACPI: Interpreter enabled
[ 0.358067] ACPI: (supports S0 S3 S4 S5)
[ 0.358067] ACPI: Using IOAPIC for interrupt routing
[ 0.358086] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
[ 0.361878] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
[ 0.361881] acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI]
[ 0.361925] acpi PNP0A08:00: _OSC: OS now controls [PCIeHotplug PME AER PCIeCapability]
[ 0.361933] acpi PNP0A08:00: [Firmware Info]: MMCONFIG for domain 0000 [bus 00-3f] only partially covers this bridge
[ 0.362113] PCI host bridge to bus 0000:00
[ 0.362115] pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7 window]
[ 0.362116] pci_bus 0000:00: root bus resource [io 0x0d00-0xffff window]
[ 0.362117] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff window]
[ 0.362118] pci_bus 0000:00: root bus resource [mem 0x000c0000-0x000c3fff window]
[ 0.362119] pci_bus 0000:00: root bus resource [mem 0x000c4000-0x000c7fff window]
[ 0.362120] pci_bus 0000:00: root bus resource [mem 0x000c8000-0x000cbfff window]
[ 0.362121] pci_bus 0000:00: root bus resource [mem 0x000cc000-0x000cffff window]
[ 0.362122] pci_bus 0000:00: root bus resource [mem 0x000d0000-0x000d3fff window]
[ 0.362123] pci_bus 0000:00: root bus resource [mem 0x000d4000-0x000d7fff window]
[ 0.362124] pci_bus 0000:00: root bus resource [mem 0x000d8000-0x000dbfff window]
[ 0.362125] pci_bus 0000:00: root bus resource [mem 0x000dc000-0x000dffff window]
[ 0.362126] pci_bus 0000:00: root bus resource [mem 0x000e0000-0x000e3fff window]
[ 0.362127] pci_bus 0000:00: root bus resource [mem 0x000e4000-0x000e7fff window]
[ 0.362128] pci_bus 0000:00: root bus resource [mem 0x000e8000-0x000ebfff window]
[ 0.362129] pci_bus 0000:00: root bus resource [mem 0x000ec000-0x000effff window]
[ 0.362130] pci_bus 0000:00: root bus resource [mem 0x000f0000-0x000fffff window]
[ 0.362131] pci_bus 0000:00: root bus resource [mem 0xcea00000-0xf7ffffff window]
[ 0.362132] pci_bus 0000:00: root bus resource [mem 0xfed40000-0xfed44fff window]
[ 0.362133] pci_bus 0000:00: root bus resource [bus 00-ff]
[ 0.362140] pci 0000:00:00.0: [8086:0154] type 00 class 0x060000
[ 0.362223] pci 0000:00:02.0: [8086:0166] type 00 class 0x030000
[ 0.362232] pci 0000:00:02.0: reg 0x10: [mem 0xf1000000-0xf13fffff 64bit]
[ 0.362238] pci 0000:00:02.0: reg 0x18: [mem 0xe0000000-0xefffffff 64bit pref]
[ 0.362242] pci 0000:00:02.0: reg 0x20: [io 0x3000-0x303f]
[ 0.362314] pci 0000:00:04.0: [8086:0153] type 00 class 0x118000
[ 0.362322] pci 0000:00:04.0: reg 0x10: [mem 0xf1630000-0xf1637fff 64bit]
[ 0.362414] pci 0000:00:14.0: [8086:1e31] type 00 class 0x0c0330
[ 0.362434] pci 0000:00:14.0: reg 0x10: [mem 0xf1620000-0xf162ffff 64bit]
[ 0.362501] pci 0000:00:14.0: PME# supported from D3hot D3cold
[ 0.362536] pci 0000:00:14.0: System wakeup disabled by ACPI
[ 0.362603] pci 0000:00:16.0: [8086:1e3a] type 00 class 0x078000
[ 0.362681] pci 0000:00:16.0: reg 0x10: [mem 0xf1641000-0xf164100f 64bit]
[ 0.363009] pci 0000:00:16.0: PME# supported from D0 D3hot D3cold
[ 0.363103] pci 0000:00:19.0: [8086:1502] type 00 class 0x020000
[ 0.363118] pci 0000:00:19.0: reg 0x10: [mem 0xf1600000-0xf161ffff]
[ 0.363126] pci 0000:00:19.0: reg 0x14: [mem 0xf163c000-0xf163cfff]
[ 0.363134] pci 0000:00:19.0: reg 0x18: [io 0x3040-0x305f]
[ 0.363193] pci 0000:00:19.0: PME# supported from D0 D3hot D3cold
[ 0.363256] pci 0000:00:1a.0: [8086:1e2d] type 00 class 0x0c0320
[ 0.363273] pci 0000:00:1a.0: reg 0x10: [mem 0xf163e000-0xf163e3ff]
[ 0.363355] pci 0000:00:1a.0: PME# supported from D0 D3hot D3cold
[ 0.363389] pci 0000:00:1a.0: System wakeup disabled by ACPI
[ 0.363427] pci 0000:00:1b.0: [8086:1e20] type 00 class 0x040300
[ 0.363444] pci 0000:00:1b.0: reg 0x10: [mem 0xf1638000-0xf163bfff 64bit]
[ 0.363514] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
[ 0.363551] pci 0000:00:1b.0: System wakeup disabled by ACPI
[ 0.363593] pci 0000:00:1c.0: [8086:1e10] type 01 class 0x060400
[ 0.363718] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
[ 0.363801] pci 0000:00:1c.1: [8086:1e12] type 01 class 0x060400
[ 0.363925] pci 0000:00:1c.1: PME# supported from D0 D3hot D3cold
[ 0.364011] pci 0000:00:1c.2: [8086:1e14] type 01 class 0x060400
[ 0.364136] pci 0000:00:1c.2: PME# supported from D0 D3hot D3cold
[ 0.364221] pci 0000:00:1d.0: [8086:1e26] type 00 class 0x0c0320
[ 0.364238] pci 0000:00:1d.0: reg 0x10: [mem 0xf163f000-0xf163f3ff]
[ 0.364320] pci 0000:00:1d.0: PME# supported from D0 D3hot D3cold
[ 0.364354] pci 0000:00:1d.0: System wakeup disabled by ACPI
[ 0.364391] pci 0000:00:1f.0: [8086:1e55] type 00 class 0x060100
[ 0.364552] pci 0000:00:1f.2: [8086:1e03] type 00 class 0x010601
[ 0.364568] pci 0000:00:1f.2: reg 0x10: [io 0x3080-0x3087]
[ 0.364576] pci 0000:00:1f.2: reg 0x14: [io 0x3090-0x3093]
[ 0.364584] pci 0000:00:1f.2: reg 0x18: [io 0x3088-0x308f]
[ 0.364592] pci 0000:00:1f.2: reg 0x1c: [io 0x3094-0x3097]
[ 0.364600] pci 0000:00:1f.2: reg 0x20: [io 0x3060-0x307f]
[ 0.364609] pci 0000:00:1f.2: reg 0x24: [mem 0xf163d000-0xf163d7ff]
[ 0.364652] pci 0000:00:1f.2: PME# supported from D3hot
[ 0.364717] pci 0000:00:1f.3: [8086:1e22] type 00 class 0x0c0500
[ 0.364732] pci 0000:00:1f.3: reg 0x10: [mem 0xf1640000-0xf16400ff 64bit]
[ 0.364752] pci 0000:00:1f.3: reg 0x20: [io 0x0400-0x041f]
[ 0.364924] pci 0000:01:00.0: [1180:e823] type 00 class 0x080501
[ 0.364956] pci 0000:01:00.0: MMC controller base frequency changed to 50Mhz.
[ 0.364994] pci 0000:01:00.0: reg 0x10: [mem 0xf1400000-0xf14000ff]
[ 0.365297] pci 0000:01:00.0: supports D1 D2
[ 0.365298] pci 0000:01:00.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.376903] pci 0000:00:1c.0: PCI bridge to [bus 01]
[ 0.376914] pci 0000:00:1c.0: bridge window [mem 0xf1400000-0xf14fffff]
[ 0.377032] pci 0000:02:00.0: [168c:0030] type 00 class 0x028000
[ 0.377074] pci 0000:02:00.0: reg 0x10: [mem 0xf1500000-0xf151ffff 64bit]
[ 0.377157] pci 0000:02:00.0: reg 0x30: [mem 0xf1520000-0xf152ffff pref]
[ 0.377273] pci 0000:02:00.0: supports D1
[ 0.377274] pci 0000:02:00.0: PME# supported from D0 D1 D3hot
[ 0.388907] pci 0000:00:1c.1: PCI bridge to [bus 02]
[ 0.388918] pci 0000:00:1c.1: bridge window [mem 0xf1500000-0xf15fffff]
[ 0.389019] pci 0000:00:1c.2: PCI bridge to [bus 03]
[ 0.389024] pci 0000:00:1c.2: bridge window [io 0x2000-0x2fff]
[ 0.389028] pci 0000:00:1c.2: bridge window [mem 0xf0800000-0xf0ffffff]
[ 0.389036] pci 0000:00:1c.2: bridge window [mem 0xf0000000-0xf07fffff 64bit pref]
[ 0.389146] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 10 12 14 15) *11
[ 0.389189] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 *11 12 14 15)
[ 0.389230] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 7 10 12 14 15) *11
[ 0.389271] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 *11 12 14 15)
[ 0.389311] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 10 12 14 15) *11
[ 0.389351] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 *11 12 14 15)
[ 0.389391] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 7 10 12 14 15) *11
[ 0.389431] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 7 *11 12 14 15)
[ 0.390000] ACPI: Enabled 1 GPEs in block 00 to 3F
[ 0.390062] ACPI : EC: interrupt unblocked
[ 0.390068] ACPI : EC: event unblocked
[ 0.390074] ACPI: \_SB_.PCI0.LPCB.EC__: GPE=0x11, EC_CMD/EC_SC=0x66, EC_DATA=0x62
[ 0.390076] ACPI: \_SB_.PCI0.LPCB.EC__: Used as boot DSDT EC to handle transactions and events
[ 0.390166] vgaarb: setting as boot device: PCI:0000:00:02.0
[ 0.390167] vgaarb: device added: PCI:0000:00:02.0,decodes=io+mem,owns=io+mem,locks=none
[ 0.390169] vgaarb: loaded
[ 0.390170] vgaarb: bridge control possible 0000:00:02.0
[ 0.390232] PCI: Using ACPI for IRQ routing
[ 0.391703] PCI: pci_cache_line_size set to 64 bytes
[ 0.391779] e820: reserve RAM buffer [mem 0xbff0e000-0xbfffffff]
[ 0.391780] e820: reserve RAM buffer [mem 0x42f600000-0x42fffffff]
[ 0.391913] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0, 0, 0, 0, 0
[ 0.391917] hpet0: 8 comparators, 64-bit 14.318180 MHz counter
[ 0.394941] clocksource: Switched to clocksource hpet
[ 0.400847] VFS: Disk quotas dquot_6.6.0
[ 0.400873] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[ 0.400946] pnp: PnP ACPI init
[ 0.401028] system 00:00: [mem 0xfed1c000-0xfed1ffff] has been reserved
[ 0.401029] system 00:00: [mem 0xfed10000-0xfed17fff] has been reserved
[ 0.401030] system 00:00: [mem 0xfed18000-0xfed18fff] has been reserved
[ 0.401032] system 00:00: [mem 0xfed19000-0xfed19fff] has been reserved
[ 0.401033] system 00:00: [mem 0xf8000000-0xfbffffff] has been reserved
[ 0.401034] system 00:00: [mem 0xfed20000-0xfed3ffff] has been reserved
[ 0.401036] system 00:00: [mem 0xfed40000-0xfed44fff] has been reserved
[ 0.401037] system 00:00: [mem 0xfed45000-0xfed8ffff] has been reserved
[ 0.401038] system 00:00: [mem 0x20000000-0x201fffff] could not be reserved
[ 0.401039] system 00:00: [mem 0x40000000-0x401fffff] could not be reserved
[ 0.401042] system 00:00: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.401442] system 00:01: [mem 0xfed00000-0xfed003ff] has been reserved
[ 0.401444] system 00:01: Plug and Play ACPI device, IDs PNP0103 PNP0c01 (active)
[ 0.401481] system 00:02: [io 0x0500-0x057f] has been reserved
[ 0.401482] system 00:02: [io 0x0480-0x04bf] has been reserved
[ 0.401484] system 00:02: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.401504] pnp 00:03: Plug and Play ACPI device, IDs PNP0b00 (active)
[ 0.401534] pnp 00:04: Plug and Play ACPI device, IDs PNP0303 PNP030b (active)
[ 0.401560] pnp 00:05: Plug and Play ACPI device, IDs PNP0f13 (active)
[ 0.401586] pnp 00:06: Plug and Play ACPI device, IDs PNP0c31 (active)
[ 0.401603] pnp: PnP ACPI: found 7 devices
[ 0.407796] clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns
[ 0.407838] pci 0000:00:1c.0: PCI bridge to [bus 01]
[ 0.407845] pci 0000:00:1c.0: bridge window [mem 0xf1400000-0xf14fffff]
[ 0.407856] pci 0000:00:1c.1: PCI bridge to [bus 02]
[ 0.407863] pci 0000:00:1c.1: bridge window [mem 0xf1500000-0xf15fffff]
[ 0.407874] pci 0000:00:1c.2: PCI bridge to [bus 03]
[ 0.407877] pci 0000:00:1c.2: bridge window [io 0x2000-0x2fff]
[ 0.407883] pci 0000:00:1c.2: bridge window [mem 0xf0800000-0xf0ffffff]
[ 0.407888] pci 0000:00:1c.2: bridge window [mem 0xf0000000-0xf07fffff 64bit pref]
[ 0.407896] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7 window]
[ 0.407898] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff window]
[ 0.407899] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff window]
[ 0.407900] pci_bus 0000:00: resource 7 [mem 0x000c0000-0x000c3fff window]
[ 0.407901] pci_bus 0000:00: resource 8 [mem 0x000c4000-0x000c7fff window]
[ 0.407902] pci_bus 0000:00: resource 9 [mem 0x000c8000-0x000cbfff window]
[ 0.407903] pci_bus 0000:00: resource 10 [mem 0x000cc000-0x000cffff window]
[ 0.407904] pci_bus 0000:00: resource 11 [mem 0x000d0000-0x000d3fff window]
[ 0.407905] pci_bus 0000:00: resource 12 [mem 0x000d4000-0x000d7fff window]
[ 0.407906] pci_bus 0000:00: resource 13 [mem 0x000d8000-0x000dbfff window]
[ 0.407907] pci_bus 0000:00: resource 14 [mem 0x000dc000-0x000dffff window]
[ 0.407908] pci_bus 0000:00: resource 15 [mem 0x000e0000-0x000e3fff window]
[ 0.407909] pci_bus 0000:00: resource 16 [mem 0x000e4000-0x000e7fff window]
[ 0.407910] pci_bus 0000:00: resource 17 [mem 0x000e8000-0x000ebfff window]
[ 0.407911] pci_bus 0000:00: resource 18 [mem 0x000ec000-0x000effff window]
[ 0.407912] pci_bus 0000:00: resource 19 [mem 0x000f0000-0x000fffff window]
[ 0.407913] pci_bus 0000:00: resource 20 [mem 0xcea00000-0xf7ffffff window]
[ 0.407914] pci_bus 0000:00: resource 21 [mem 0xfed40000-0xfed44fff window]
[ 0.407915] pci_bus 0000:01: resource 1 [mem 0xf1400000-0xf14fffff]
[ 0.407916] pci_bus 0000:02: resource 1 [mem 0xf1500000-0xf15fffff]
[ 0.407917] pci_bus 0000:03: resource 0 [io 0x2000-0x2fff]
[ 0.407918] pci_bus 0000:03: resource 1 [mem 0xf0800000-0xf0ffffff]
[ 0.407919] pci_bus 0000:03: resource 2 [mem 0xf0000000-0xf07fffff 64bit pref]
[ 0.408006] NET: Registered protocol family 2
[ 0.408185] TCP established hash table entries: 131072 (order: 8, 1048576 bytes)
[ 0.408378] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
[ 0.408484] TCP: Hash tables configured (established 131072 bind 65536)
[ 0.408512] UDP hash table entries: 8192 (order: 6, 262144 bytes)
[ 0.408551] UDP-Lite hash table entries: 8192 (order: 6, 262144 bytes)
[ 0.408623] NET: Registered protocol family 1
[ 0.408635] pci 0000:00:02.0: Video device with shadowed ROM at [mem 0x000c0000-0x000dffff]
[ 0.409207] PCI: CLS 64 bytes, default 64
[ 0.409252] Unpacking initramfs...
[ 0.732982] Freeing initrd memory: 20364K (ffff9880f5829000 - ffff9880f6c0c000)
[ 0.733081] PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
[ 0.733083] software IO TLB [mem 0xbbf0e000-0xbff0e000] (64MB) mapped at [ffff98817bf0e000-ffff98817ff0dfff]
[ 0.733409] audit: initializing netlink subsys (disabled)
[ 0.733427] audit: type=2000 audit(1493353781.728:1): initialized
[ 0.733699] Initialise system trusted keyrings
[ 0.733793] workingset: timestamp_bits=40 max_order=22 bucket_order=0
[ 0.733828] zbud: loaded
[ 0.774179] Key type asymmetric registered
[ 0.774180] Asymmetric key parser 'x509' registered
[ 0.774198] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 251)
[ 0.774227] io scheduler noop registered
[ 0.774228] io scheduler deadline registered
[ 0.774243] io scheduler cfq registered (default)
[ 0.774967] pcieport 0000:00:1c.0: Signaling PME through PCIe PME interrupt
[ 0.774969] pci 0000:01:00.0: Signaling PME through PCIe PME interrupt
[ 0.774975] pcie_pme 0000:00:1c.0:pcie001: service driver pcie_pme loaded
[ 0.774993] pcieport 0000:00:1c.1: Signaling PME through PCIe PME interrupt
[ 0.774994] pci 0000:02:00.0: Signaling PME through PCIe PME interrupt
[ 0.774998] pcie_pme 0000:00:1c.1:pcie001: service driver pcie_pme loaded
[ 0.775017] pcieport 0000:00:1c.2: Signaling PME through PCIe PME interrupt
[ 0.775021] pcie_pme 0000:00:1c.2:pcie001: service driver pcie_pme loaded
[ 0.775030] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[ 0.775041] pciehp 0000:00:1c.2:pcie004: Slot #0 AttnBtn- PwrCtrl- MRL- AttnInd- PwrInd- HotPlug+ Surprise+ Interlock- NoCompl+ LLActRep+
[ 0.775070] pciehp 0000:00:1c.2:pcie004: service driver pciehp loaded
[ 0.775074] pciehp: PCI Express Hot Plug Controller Driver version: 0.4
[ 0.775086] efifb: probing for efifb
[ 0.775098] efifb: framebuffer at 0xe0000000, using 4224k, total 4224k
[ 0.775099] efifb: mode is 1366x768x32, linelength=5632, pages=1
[ 0.775099] efifb: scrolling: redraw
[ 0.775100] efifb: Truecolor: size=8:8:8:8, shift=24:16:8:0
[ 0.777503] Console: switching to colour frame buffer device 170x48
[ 0.779718] fb0: EFI VGA frame buffer device
[ 0.779724] intel_idle: MWAIT substates: 0x21120
[ 0.779725] intel_idle: v0.4.1 model 0x3A
[ 0.779866] intel_idle: lapic_timer_reliable_states 0xffffffff
[ 0.780217] GHES: HEST is not enabled!
[ 0.780264] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
[ 0.780622] Linux agpgart interface v0.103
[ 0.780661] AMD IOMMUv2 driver by Joerg Roedel <jroedel@suse.de>
[ 0.780661] AMD IOMMUv2 functionality not available on this system
[ 0.780963] i8042: PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at 0x60,0x64 irq 1,12
[ 0.783022] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 0.783025] serio: i8042 AUX port at 0x60,0x64 irq 12
[ 0.783162] mousedev: PS/2 mouse device common for all mice
[ 0.783200] rtc_cmos 00:03: RTC can wake from S4
[ 0.783365] rtc_cmos 00:03: rtc core: registered rtc_cmos as rtc0
[ 0.783391] rtc_cmos 00:03: alarms up to one month, 242 bytes nvram, hpet irqs
[ 0.783399] intel_pstate: Intel P-state driver initializing
[ 0.783662] ledtrig-cpu: registered to indicate activity on CPUs
[ 0.784053] NET: Registered protocol family 10
[ 0.784496] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input0
[ 0.784740] mip6: Mobile IPv6
[ 0.784743] NET: Registered protocol family 17
[ 0.784748] mpls_gso: MPLS GSO support
[ 0.785079] microcode: sig=0x306a9, pf=0x10, revision=0x1b
[ 0.785179] microcode: Microcode Update Driver: v2.01 <tigran@aivazian.fsnet.co.uk>, Peter Oruba
[ 0.785371] registered taskstats version 1
[ 0.785373] Loading compiled-in X.509 certificates
[ 0.788071] alg: No test for pkcs1pad(rsa,sha256) (pkcs1pad(rsa-generic,sha256))
[ 0.788825] Loaded X.509 cert 'Debian Project: Ben Hutchings: 008a018dca80932630'
[ 0.788857] zswap: loaded using pool lzo/zbud
[ 0.789472] rtc_cmos 00:03: setting system clock to 2017-04-28 04:29:42 UTC (1493353782)
[ 0.789531] PM: Hibernation image not present or could not be loaded.
[ 0.791624] Freeing unused kernel memory: 1392K (ffffffffb5f1c000 - ffffffffb6078000)
[ 0.791626] Write protecting the kernel read-only data: 12288k
[ 0.792497] Freeing unused kernel memory: 2032K (ffff988293a04000 - ffff988293c00000)
[ 0.797181] Freeing unused kernel memory: 1252K (ffff988293ec7000 - ffff988294000000)
[ 0.807641] x86/mm: Checked W+X mappings: passed, no W+X pages found.
[ 0.899750] random: systemd-udevd: uninitialized urandom read (16 bytes read)
[ 0.899856] random: systemd-udevd: uninitialized urandom read (16 bytes read)
[ 0.899870] random: systemd-udevd: uninitialized urandom read (16 bytes read)
[ 0.899885] random: systemd-udevd: uninitialized urandom read (16 bytes read)
[ 0.901116] random: udevadm: uninitialized urandom read (16 bytes read)
[ 0.901163] random: udevadm: uninitialized urandom read (16 bytes read)
[ 0.902760] random: udevadm: uninitialized urandom read (16 bytes read)
[ 0.902844] random: udevadm: uninitialized urandom read (16 bytes read)
[ 0.902865] random: udevadm: uninitialized urandom read (16 bytes read)
[ 0.903314] random: udevadm: uninitialized urandom read (16 bytes read)
[ 0.936258] thermal LNXTHERM:00: registered as thermal_zone0
[ 0.936260] ACPI: Thermal Zone [THM0] (53 C)
[ 0.936907] thermal LNXTHERM:01: registered as thermal_zone1
[ 0.936908] ACPI: Thermal Zone [THM1] (27 C)
[ 0.941206] pps_core: LinuxPPS API ver. 1 registered
[ 0.941208] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it>
[ 0.942050] ACPI: bus type USB registered
[ 0.942088] usbcore: registered new interface driver usbfs
[ 0.942104] usbcore: registered new interface driver hub
[ 0.942147] usbcore: registered new device driver usb
[ 0.946413] i801_smbus 0000:00:1f.3: SMBus using PCI interrupt
[ 0.949608] PTP clock support registered
[ 0.951858] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 0.952909] ehci-pci: EHCI PCI platform driver
[ 0.954411] xhci_hcd 0000:00:14.0: xHCI Host Controller
[ 0.954420] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 1
[ 0.955525] xhci_hcd 0000:00:14.0: hcc params 0x200071a1 hci version 0x100 quirks 0x0000b930
[ 0.955532] xhci_hcd 0000:00:14.0: cache line size of 64 is not supported
[ 0.955792] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
[ 0.955794] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 0.955796] usb usb1: Product: xHCI Host Controller
[ 0.955798] usb usb1: Manufacturer: Linux 4.9.0-2-amd64 xhci-hcd
[ 0.955799] usb usb1: SerialNumber: 0000:00:14.0
[ 0.955991] hub 1-0:1.0: USB hub found
[ 0.956004] hub 1-0:1.0: 4 ports detected
[ 0.956241] xhci_hcd 0000:00:14.0: xHCI Host Controller
[ 0.956246] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 2
[ 0.956298] usb usb2: New USB device found, idVendor=1d6b, idProduct=0003
[ 0.956300] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 0.956302] usb usb2: Product: xHCI Host Controller
[ 0.956303] usb usb2: Manufacturer: Linux 4.9.0-2-amd64 xhci-hcd
[ 0.956305] usb usb2: SerialNumber: 0000:00:14.0
[ 0.956460] hub 2-0:1.0: USB hub found
[ 0.956472] hub 2-0:1.0: 4 ports detected
[ 0.957155] ehci-pci 0000:00:1a.0: EHCI Host Controller
[ 0.957162] ehci-pci 0000:00:1a.0: new USB bus registered, assigned bus number 3
[ 0.957178] ehci-pci 0000:00:1a.0: debug port 2
[ 0.958443] e1000e: Intel(R) PRO/1000 Network Driver - 3.2.6-k
[ 0.958445] e1000e: Copyright(c) 1999 - 2015 Intel Corporation.
[ 0.961091] ehci-pci 0000:00:1a.0: cache line size of 64 is not supported
[ 0.961117] ehci-pci 0000:00:1a.0: irq 21, io mem 0xf163e000
[ 0.965257] sdhci: Secure Digital Host Controller Interface driver
[ 0.965258] sdhci: Copyright(c) Pierre Ossman
[ 0.969090] AVX version of gcm_enc/dec engaged.
[ 0.969091] AES CTR mode by8 optimization enabled
[ 0.973724] sdhci-pci 0000:01:00.0: SDHCI controller found [1180:e823] (rev 4)
[ 0.974173] SCSI subsystem initialized
[ 0.975354] mmc0: SDHCI controller on PCI [0000:01:00.0] using DMA
[ 0.975478] ehci-pci 0000:00:1a.0: USB 2.0 started, EHCI 1.00
[ 0.975563] usb usb3: New USB device found, idVendor=1d6b, idProduct=0002
[ 0.975566] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 0.975567] usb usb3: Product: EHCI Host Controller
[ 0.975569] usb usb3: Manufacturer: Linux 4.9.0-2-amd64 ehci_hcd
[ 0.975570] usb usb3: SerialNumber: 0000:00:1a.0
[ 0.975759] hub 3-0:1.0: USB hub found
[ 0.975770] hub 3-0:1.0: 3 ports detected
[ 0.976146] ehci-pci 0000:00:1d.0: EHCI Host Controller
[ 0.976154] ehci-pci 0000:00:1d.0: new USB bus registered, assigned bus number 4
[ 0.976169] ehci-pci 0000:00:1d.0: debug port 2
[ 0.980072] ehci-pci 0000:00:1d.0: cache line size of 64 is not supported
[ 0.980095] ehci-pci 0000:00:1d.0: irq 19, io mem 0xf163f000
[ 0.980892] libata version 3.00 loaded.
[ 0.994985] ehci-pci 0000:00:1d.0: USB 2.0 started, EHCI 1.00
[ 0.995110] usb usb4: New USB device found, idVendor=1d6b, idProduct=0002
[ 0.995112] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 0.995113] usb usb4: Product: EHCI Host Controller
[ 0.995114] usb usb4: Manufacturer: Linux 4.9.0-2-amd64 ehci_hcd
[ 0.995114] usb usb4: SerialNumber: 0000:00:1d.0
[ 0.995292] hub 4-0:1.0: USB hub found
[ 0.995309] hub 4-0:1.0: 3 ports detected
[ 0.995576] e1000e 0000:00:19.0: Interrupt Throttling Rate (ints/sec) set to dynamic conservative mode
[ 1.136661] e1000e 0000:00:19.0 0000:00:19.0 (uninitialized): registered PHC clock
[ 1.261836] e1000e 0000:00:19.0 eth0: (PCI Express:2.5GT/s:Width x1) 3c:97:0e:b6:6c:5b
[ 1.261839] e1000e 0000:00:19.0 eth0: Intel(R) PRO/1000 Network Connection
[ 1.261899] e1000e 0000:00:19.0 eth0: MAC: 10, PHY: 11, PBA No: 1000FF-0FF
[ 1.261942] ahci 0000:00:1f.2: version 3.0
[ 1.262346] ahci 0000:00:1f.2: SSS flag set, parallel bus scan disabled
[ 1.272497] ahci 0000:00:1f.2: AHCI 0001.0300 32 slots 6 ports 6 Gbps 0x7 impl SATA mode
[ 1.272500] ahci 0000:00:1f.2: flags: 64bit ncq sntf ilck stag pm led clo pio slum part apst
[ 1.273599] scsi host0: ahci
[ 1.273849] scsi host1: ahci
[ 1.274044] scsi host2: ahci
[ 1.274181] scsi host3: ahci
[ 1.274336] scsi host4: ahci
[ 1.274480] scsi host5: ahci
[ 1.274618] ata1: SATA max UDMA/133 abar m2048@0xf163d000 port 0xf163d100 irq 31
[ 1.274622] ata2: SATA max UDMA/133 abar m2048@0xf163d000 port 0xf163d180 irq 31
[ 1.274626] ata3: SATA max UDMA/133 abar m2048@0xf163d000 port 0xf163d200 irq 31
[ 1.274627] ata4: DUMMY
[ 1.274628] ata5: DUMMY
[ 1.274630] ata6: DUMMY
[ 1.303054] usb 3-1: new high-speed USB device number 2 using ehci-pci
[ 1.323050] usb 4-1: new high-speed USB device number 2 using ehci-pci
[ 1.451513] usb 3-1: New USB device found, idVendor=8087, idProduct=0024
[ 1.451516] usb 3-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[ 1.451938] hub 3-1:1.0: USB hub found
[ 1.452072] hub 3-1:1.0: 6 ports detected
[ 1.471505] usb 4-1: New USB device found, idVendor=8087, idProduct=0024
[ 1.471508] usb 4-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[ 1.471927] hub 4-1:1.0: USB hub found
[ 1.472730] hub 4-1:1.0: 8 ports detected
[ 1.590021] ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
[ 1.590769] ata1.00: ATA-9: WDC WD10SPCX-08HWST0, 01.01A01, max UDMA/133
[ 1.590772] ata1.00: 1953525168 sectors, multi 0: LBA48 NCQ (depth 31/32), AA
[ 1.591579] ata1.00: configured for UDMA/133
[ 1.591944] scsi 0:0:0:0: Direct-Access ATA WDC WD10SPCX-08H 1A01 PQ: 0 ANSI: 5
[ 1.727058] psmouse serio1: synaptics: queried max coordinates: x [..5768], y [..5062]
[ 1.739039] usb 3-1.4: new full-speed USB device number 3 using ehci-pci
[ 1.757530] psmouse serio1: synaptics: queried min coordinates: x [1174..], y [790..]
[ 1.759042] usb 4-1.6: new full-speed USB device number 3 using ehci-pci
[ 1.763062] tsc: Refined TSC clocksource calibration: 2594.107 MHz
[ 1.763074] clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x25647d583cf, max_idle_ns: 440795304232 ns
[ 1.766475] random: fast init done
[ 1.817446] psmouse serio1: synaptics: Touchpad model: 1, fw: 8.1, id: 0x1e2b1, caps: 0xd002a3/0x940300/0x123800/0x0, board id: 1611, fw id: 1099905
[ 1.817472] psmouse serio1: synaptics: serio: Synaptics pass-through port at isa0060/serio1/input0
[ 1.852295] usb 3-1.4: New USB device found, idVendor=0a5c, idProduct=217f
[ 1.852299] usb 3-1.4: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[ 1.852301] usb 3-1.4: Product: Broadcom Bluetooth Device
[ 1.852303] usb 3-1.4: Manufacturer: Broadcom Corp
[ 1.852304] usb 3-1.4: SerialNumber: 7CE9D3B7FC24
[ 1.855437] input: SynPS/2 Synaptics TouchPad as /devices/platform/i8042/serio1/input/input2
[ 1.877264] usb 4-1.6: New USB device found, idVendor=08e6, idProduct=34ec
[ 1.877268] usb 4-1.6: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[ 1.877284] usb 4-1.6: Product: GemPC Express
[ 1.877286] usb 4-1.6: Manufacturer: Gemplus
[ 1.931075] usb 3-1.6: new high-speed USB device number 4 using ehci-pci
[ 1.937868] ata2: SATA link down (SStatus 0 SControl 300)
[ 2.047155] usb 3-1.6: New USB device found, idVendor=04f2, idProduct=b2ea
[ 2.047158] usb 3-1.6: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[ 2.047160] usb 3-1.6: Product: Integrated Camera
[ 2.047162] usb 3-1.6: Manufacturer: Chicony Electronics Co., Ltd.
[ 2.254112] ata3: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[ 2.256472] ata3.00: ATA-8: LITEONIT LSS-32L6G-HP, DS51704, max UDMA/133
[ 2.256475] ata3.00: 62533296 sectors, multi 1: LBA48 NCQ (depth 31/32), AA
[ 2.256977] ata3.00: configured for UDMA/133
[ 2.257359] scsi 2:0:0:0: Direct-Access ATA LITEONIT LSS-32L 704 PQ: 0 ANSI: 5
[ 2.300573] sd 0:0:0:0: [sda] 1953525168 512-byte logical blocks: (1.00 TB/932 GiB)
[ 2.300578] sd 0:0:0:0: [sda] 4096-byte physical blocks
[ 2.300679] sd 0:0:0:0: [sda] Write Protect is off
[ 2.300684] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 2.300691] sd 2:0:0:0: [sdb] 62533296 512-byte logical blocks: (32.0 GB/29.8 GiB)
[ 2.300734] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 2.300792] sd 2:0:0:0: [sdb] Write Protect is off
[ 2.300797] sd 2:0:0:0: [sdb] Mode Sense: 00 3a 00 00
[ 2.300828] sd 2:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 2.302971] sdb: sdb1 sdb2 sdb3 sdb5 sdb6 sdb7
[ 2.303716] sd 2:0:0:0: [sdb] Attached SCSI disk
[ 2.442897] sda: sda1 sda2 sda3 sda4 sda5 sda6 sda7 sda8
[ 2.444451] sd 0:0:0:0: [sda] Attached SCSI disk
[ 2.487395] psmouse serio2: trackpoint: IBM TrackPoint firmware: 0x0e, buttons: 3/3
[ 2.682586] input: TPPS/2 IBM TrackPoint as /devices/platform/i8042/serio1/serio2/input/input3
[ 2.787291] clocksource: Switched to clocksource tsc
[ 3.797030] md: linear personality registered for level -1
[ 3.799891] md: multipath personality registered for level -4
[ 3.802695] md: raid0 personality registered for level 0
[ 3.805972] md: raid1 personality registered for level 1
[ 3.879096] raid6: sse2x1 gen() 4785 MB/s
[ 3.947089] raid6: sse2x1 xor() 4896 MB/s
[ 4.015092] raid6: sse2x2 gen() 9874 MB/s
[ 4.083092] raid6: sse2x2 xor() 7951 MB/s
[ 4.151099] raid6: sse2x4 gen() 13091 MB/s
[ 4.219101] raid6: sse2x4 xor() 9693 MB/s
[ 4.219102] raid6: using algorithm sse2x4 gen() 13091 MB/s
[ 4.219103] raid6: .... xor() 9693 MB/s, rmw enabled
[ 4.219103] raid6: using ssse3x2 recovery algorithm
[ 4.219569] xor: automatically using best checksumming function avx
[ 4.219948] async_tx: api initialized (async)
[ 4.223337] md: raid6 personality registered for level 6
[ 4.223338] md: raid5 personality registered for level 5
[ 4.223339] md: raid4 personality registered for level 4
[ 4.228148] md: raid10 personality registered for level 10
[ 4.245631] Btrfs loaded, crc32c=crc32c-intel
[ 5.037319] PM: Starting manual resume from disk
[ 5.037325] PM: Hibernation image partition 8:2 present
[ 5.037326] PM: Looking for hibernation image.
[ 5.037542] PM: Image not found (code -22)
[ 5.037543] PM: Hibernation image not present or could not be loaded.
[ 5.173030] EXT4-fs (sdb5): mounted filesystem with ordered data mode. Opts: (null)
[ 5.307713] ip_tables: (C) 2000-2006 Netfilter Core Team
[ 5.312506] systemd[1]: systemd 232 running in system mode. (+PAM +AUDIT +SELINUX +IMA +APPARMOR +SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ +LZ4 +SECCOMP +BLKID +ELFUTILS +KMOD +IDN)
[ 5.312632] systemd[1]: Detected architecture x86-64.
[ 5.312794] systemd[1]: Set hostname to <universi-mcbk52>.
[ 5.371874] random: crng init done
[ 5.452178] systemd[1]: hdapsd.service: Cannot add dependency job, ignoring: Unit hdapsd.service is masked.
[ 5.452236] systemd[1]: transmission-daemon.service: Cannot add dependency job, ignoring: Unit transmission-daemon.service is masked.
[ 5.453188] systemd[1]: Listening on Journal Socket.
[ 5.453383] systemd[1]: Set up automount Arbitrary Executable File Formats File System Automount Point.
[ 5.453463] systemd[1]: Listening on Journal Audit Socket.
[ 5.453609] systemd[1]: Created slice User and Session Slice.
[ 5.453640] systemd[1]: Listening on fsck to fsckd communication Socket.
[ 5.471387] EXT4-fs (sdb5): re-mounted. Opts: discard,user_xattr,errors=remount-ro
[ 5.489747] RPC: Registered named UNIX socket transport module.
[ 5.489749] RPC: Registered udp transport module.
[ 5.489750] RPC: Registered tcp transport module.
[ 5.489750] RPC: Registered tcp NFSv4.1 backchannel transport module.
[ 5.500521] lp: driver loaded but no devices found
[ 5.503114] ppdev: user-space parallel port driver
[ 5.632661] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[ 5.633926] input: Sleep Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/device:1f/PNP0C09:00/PNP0C0E:00/input/input4
[ 5.633931] ACPI: Sleep Button [SLPB]
[ 5.634098] input: Lid Switch as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/device:1f/PNP0C09:00/PNP0C0D:00/input/input5
[ 5.634178] ACPI: Lid Switch [LID]
[ 5.634239] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input6
[ 5.634242] ACPI: Power Button [PWRF]
[ 5.643396] tpm_tis 00:06: 1.2 TPM (device-id 0x0, rev-id 78)
[ 5.657033] [drm] Initialized
[ 5.660583] ACPI: AC Adapter [AC] (on-line)
[ 5.671203] Non-volatile memory driver v1.3
[ 5.676160] ACPI: Battery Slot [BAT0] (battery present)
[ 5.676281] ACPI: Battery Slot [BAT1] (battery absent)
[ 5.677284] thinkpad_acpi: ThinkPad ACPI Extras v0.25
[ 5.677285] thinkpad_acpi: http://ibm-acpi.sf.net/
[ 5.677285] thinkpad_acpi: ThinkPad BIOS CBET4000 4.5-1640-g7e438af995, EC G2HT35WW-3.22
[ 5.677286] thinkpad_acpi: Lenovo ThinkPad X230, model 23255A9
[ 5.677597] thinkpad_acpi: possible tablet mode switch found; ThinkPad in laptop mode
[ 5.677677] thinkpad_acpi: This ThinkPad has standard ACPI backlight brightness control, supported by the ACPI video driver
[ 5.677678] thinkpad_acpi: Disabling thinkpad-acpi brightness events by default...
[ 5.679552] thinkpad_acpi: Standard ACPI backlight interface available, not loading native one
[ 5.679613] thinkpad_acpi: Console audio control enabled, mode: monitor (read only)
[ 5.680745] input: ThinkPad Extra Buttons as /devices/platform/thinkpad_acpi/input/input7
[ 5.708543] sd 0:0:0:0: Attached scsi generic sg0 type 0
[ 5.709084] sd 2:0:0:0: Attached scsi generic sg1 type 0
[ 5.770227] ath: phy0: Killer Wireless card detected
[ 5.783438] ath: phy0: ASPM enabled: 0x43
[ 5.783441] ath: EEPROM regdomain: 0x60
[ 5.783442] ath: EEPROM indicates we should expect a direct regpair map
[ 5.783443] ath: Country alpha2 being used: 00
[ 5.783444] ath: Regpair used: 0x60
[ 5.831869] input: PC Speaker as /devices/platform/pcspkr/input/input8
[ 5.835884] ieee80211 phy0: Selected rate control algorithm 'minstrel_ht'
[ 5.836204] ieee80211 phy0: Atheros AR9300 Rev:3 mem=0xffffb6f0424a0000, irq=17
[ 5.838462] RAPL PMU: API unit is 2^-32 Joules, 3 fixed counters, 163840 ms ovfl timer
[ 5.838463] RAPL PMU: hw unit of domain pp0-core 2^-16 Joules
[ 5.838464] RAPL PMU: hw unit of domain package 2^-16 Joules
[ 5.838465] RAPL PMU: hw unit of domain pp1-gpu 2^-16 Joules
[ 6.209149] EXT4-fs (sdb7): mounted filesystem with ordered data mode. Opts: discard,user_xattr
[ 6.374265] EXT4-fs (sdb3): mounting ext2 file system using the ext4 subsystem
[ 6.377361] EXT4-fs (sdb3): mounted filesystem without journal. Opts: user_xattr
[ 6.449920] Adding 8389628k swap on /dev/sda2. Priority:-1 extents:1 across:8389628k FS
[ 7.281234] Bluetooth: Core ver 2.22
[ 7.281255] NET: Registered protocol family 31
[ 7.281256] Bluetooth: HCI device and connection manager initialized
[ 7.281261] Bluetooth: HCI socket layer initialized
[ 7.281265] Bluetooth: L2CAP socket layer initialized
[ 7.281274] Bluetooth: SCO socket layer initialized
[ 7.291146] media: Linux media interface: v0.10
[ 7.298987] Linux video capture interface: v2.00
[ 7.356372] usbcore: registered new interface driver btusb
[ 7.375567] uvcvideo: Found UVC 1.00 device Integrated Camera (04f2:b2ea)
[ 7.377273] uvcvideo 3-1.6:1.0: Entity type for entity Extension 4 was not initialized!
[ 7.377278] uvcvideo 3-1.6:1.0: Entity type for entity Extension 3 was not initialized!
[ 7.377280] uvcvideo 3-1.6:1.0: Entity type for entity Processing 2 was not initialized!
[ 7.377283] uvcvideo 3-1.6:1.0: Entity type for entity Camera 1 was not initialized!
[ 7.377423] input: Integrated Camera as /devices/pci0000:00/0000:00:1a.0/usb3/3-1/3-1.6/3-1.6:1.0/input/input9
[ 7.377520] usbcore: registered new interface driver uvcvideo
[ 7.377521] USB Video Class driver (1.1.1)
[ 7.651280] mei_me 0000:00:16.0: wait hw ready failed
[ 7.651332] mei_me 0000:00:16.0: hw_start failed ret = -62
[ 7.651387] mei_me 0000:00:16.0: H_RST is set = 0x80000015
[ 8.824088] EXT4-fs (sda3): mounted filesystem with ordered data mode. Opts: user_xattr
[ 9.667358] mei_me 0000:00:16.0: wait hw ready failed
[ 9.667410] mei_me 0000:00:16.0: hw_start failed ret = -62
[ 9.667466] mei_me 0000:00:16.0: H_RST is set = 0x80000015
[ 10.280633] EXT4-fs (sda5): mounted filesystem with ordered data mode. Opts: user_xattr
[ 10.347217] systemd-journald[289]: Received request to flush runtime journal from PID 1
[ 10.347331] EXT4-fs (sdb6): mounted filesystem with ordered data mode. Opts: discard,user_xattr
[ 10.477462] EXT4-fs (sda6): mounted filesystem with ordered data mode. Opts: user_xattr
[ 11.092783] EXT4-fs (sda4): mounted filesystem with ordered data mode. Opts: user_xattr
[ 11.683467] mei_me 0000:00:16.0: wait hw ready failed
[ 11.683517] mei_me 0000:00:16.0: hw_start failed ret = -62
[ 11.683562] mei_me 0000:00:16.0: reset: reached maximal consecutive resets: disabling the device
[ 11.683626] mei_me 0000:00:16.0: reset failed ret = -19
[ 11.683666] mei_me 0000:00:16.0: link layer initialization failed.
[ 11.683714] mei_me 0000:00:16.0: init hw failure.
[ 11.683910] mei_me 0000:00:16.0: initialization failed.
[ 11.684990] ACPI Warning: SystemIO range 0x0000000000000528-0x000000000000052F conflicts with OpRegion 0x0000000000000500-0x000000000000057F (\PMIO) (20160831/utaddress-247)
[ 11.685003] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[ 11.685008] ACPI Warning: SystemIO range 0x00000000000004C0-0x00000000000004CF conflicts with OpRegion 0x0000000000000480-0x00000000000004EB (\GPIO) (20160831/utaddress-247)
[ 11.685016] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[ 11.685018] ACPI Warning: SystemIO range 0x00000000000004B0-0x00000000000004BF conflicts with OpRegion 0x0000000000000480-0x00000000000004EB (\GPIO) (20160831/utaddress-247)
[ 11.685025] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[ 11.685027] ACPI Warning: SystemIO range 0x0000000000000480-0x00000000000004AF conflicts with OpRegion 0x0000000000000480-0x00000000000004EB (\GPIO) (20160831/utaddress-247)
[ 11.685034] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[ 11.685036] lpc_ich: Resource conflict(s) found affecting gpio_ich
[ 11.685783] [drm] Memory usable by graphics device = 2048M
[ 11.685788] checking generic (e0000000 420000) vs hw (e0000000 10000000)
[ 11.685790] fb: switching to inteldrmfb from EFI VGA
[ 11.685879] Console: switching to colour dummy device 80x25
[ 11.686901] [drm] Replacing VGA console driver
[ 11.690721] iTCO_vendor_support: vendor-support=0
[ 11.692614] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.11
[ 11.692683] iTCO_wdt: Found a Panther Point TCO device (Version=2, TCOBASE=0x0560)
[ 11.693449] iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0)
[ 11.709151] snd_hda_codec_realtek hdaudioC0D0: autoconfig for ALC269VC: line_outs=1 (0x14/0x0/0x0/0x0/0x0) type:speaker
[ 11.709157] snd_hda_codec_realtek hdaudioC0D0: speaker_outs=0 (0x0/0x0/0x0/0x0/0x0)
[ 11.709161] snd_hda_codec_realtek hdaudioC0D0: hp_outs=2 (0x15/0x1b/0x0/0x0/0x0)
[ 11.709163] snd_hda_codec_realtek hdaudioC0D0: mono: mono_out=0x0
[ 11.709165] snd_hda_codec_realtek hdaudioC0D0: inputs:
[ 11.709169] snd_hda_codec_realtek hdaudioC0D0: Mic=0x18
[ 11.709170] snd_hda_codec_realtek hdaudioC0D0: Dock Mic=0x19
[ 11.709172] snd_hda_codec_realtek hdaudioC0D0: Internal Mic=0x12
[ 11.743496] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
[ 11.743498] [drm] Driver supports precise vblank timestamp query.
[ 11.743505] i915 0000:00:02.0: Invalid PCI ROM header signature: expecting 0xaa55, got 0x7b46
[ 11.743511] [drm] failed to find VBIOS tables
[ 11.743803] vgaarb: device changed decodes: PCI:0000:00:02.0,olddecodes=io+mem,decodes=io+mem:owns=io+mem
[ 11.986535] ACPI: Video Device [GFX0] (multi-head: yes rom: no post: no)
[ 11.988693] acpi device:03: registered as cooling_device4
[ 11.988808] input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:00/input/input15
[ 11.989042] snd_hda_intel 0000:00:1b.0: bound 0000:00:02.0 (ops i915_audio_component_bind_ops [i915])
[ 11.989354] [drm] Initialized i915 1.6.0 20160919 for 0000:00:02.0 on minor 0
[ 11.994812] input: HDA Digital PCBeep as /devices/pci0000:00/0000:00:1b.0/sound/card0/input10
[ 11.995835] input: HDA Intel PCH Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input11
[ 11.995957] input: HDA Intel PCH Dock Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input12
[ 11.996094] input: HDA Intel PCH Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card0/input13
[ 11.996232] input: HDA Intel PCH Dock Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card0/input14
[ 11.996354] input: HDA Intel PCH HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:1b.0/sound/card0/input16
[ 11.996496] input: HDA Intel PCH HDMI/DP,pcm=7 as /devices/pci0000:00/0000:00:1b.0/sound/card0/input17
[ 11.996687] input: HDA Intel PCH HDMI/DP,pcm=8 as /devices/pci0000:00/0000:00:1b.0/sound/card0/input18
[ 12.058295] intel_rapl: Found RAPL domain package
[ 12.058298] intel_rapl: Found RAPL domain core
[ 12.058299] intel_rapl: Found RAPL domain uncore
[ 12.173465] fbcon: inteldrmfb (fb0) is primary device
[ 13.352132] Console: switching to colour frame buffer device 170x48
[ 13.373568] i915 0000:00:02.0: fb0: inteldrmfb frame buffer device
[ 15.901041] EXT4-fs (sda8): mounted filesystem with ordered data mode. Opts: user_xattr
[ 16.508236] EXT4-fs (sda7): mounted filesystem with ordered data mode. Opts: user_xattr
[ 16.838416] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
[ 16.838418] Bluetooth: BNEP filters: protocol multicast
[ 16.838422] Bluetooth: BNEP socket layer initialized
[ 16.899054] nfc: nfc_init: NFC Core ver 0.1
[ 16.899075] NET: Registered protocol family 39
[ 19.006829] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 19.263875] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 19.276100] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
[ 19.286846] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
[ 19.303438] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
[ 19.596816] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
[ 20.187884] ip6_tables: (C) 2000-2006 Netfilter Core Team
[ 20.203831] Ebtables v2.0 registered
[ 22.437778] e1000e: eth0 NIC Link is Up 1000 Mbps Full Duplex, Flow Control: Rx/Tx
[ 22.437813] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
[ 30.548196] Bluetooth: RFCOMM TTY layer initialized
[ 30.548203] Bluetooth: RFCOMM socket layer initialized
[ 30.548210] Bluetooth: RFCOMM ver 1.11