| [ 0.000000] Initializing cgroup subsys cpuset |
| [ 0.000000] Initializing cgroup subsys cpu |
| [ 0.000000] Initializing cgroup subsys cpuacct |
| [ 0.000000] Linux version 3.16.0-4-amd64 (debian-kernel@lists.debian.org) (gcc version 4.8.4 (Debian 4.8.4-1) ) #1 SMP Debian 3.16.7-ckt9-2 (2015-04-13) |
| [ 0.000000] Command line: root=/dev/nfs initrd=initrd-cb-test-tgt-x86_64 rootfstype=nfs nfsroot=10.100.1.100:/nfsroots/cb-test-tgt-03,v3,hard,nointr,tcp ip=10.100.1.12::10.100.1.1:255.255.255.0:embed-o-matic:eth0:off console=ttyS0,115200n8 consoleblank=0 rw BOOT_IMAGE=vmlinuz-cb-test-tgt-x86_64 |
| [ 0.000000] e820: BIOS-provided physical RAM map: |
| [ 0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009fbff] usable |
| [ 0.000000] BIOS-e820: [mem 0x000000000009fc00-0x000000000009ffff] reserved |
| [ 0.000000] BIOS-e820: [mem 0x00000000000f0000-0x00000000000fffff] reserved |
| [ 0.000000] BIOS-e820: [mem 0x0000000000100000-0x00000000bff9efff] usable |
| [ 0.000000] BIOS-e820: [mem 0x00000000bff9f000-0x00000000bfffffff] reserved |
| [ 0.000000] BIOS-e820: [mem 0x0000000100000000-0x000000013fffffff] usable |
| [ 0.000000] NX (Execute Disable) protection: active |
| [ 0.000000] SMBIOS 2.7 present. |
| [ 0.000000] DMI: ASUS KFSN4-DRE/KFSN4-DRE, BIOS RAPTOR-NORMAL 06/27/2016 |
| [ 0.000000] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved |
| [ 0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable |
| [ 0.000000] AGP: No AGP bridge found |
| [ 0.000000] e820: last_pfn = 0x140000 max_arch_pfn = 0x400000000 |
| [ 0.000000] MTRR default type: uncachable |
| [ 0.000000] MTRR fixed ranges enabled: |
| [ 0.000000] 00000-9FFFF write-back |
| [ 0.000000] A0000-BFFFF uncachable |
| [ 0.000000] C0000-FFFFF write-back |
| [ 0.000000] MTRR variable ranges enabled: |
| [ 0.000000] 0 base 0000000000 mask FF80000000 write-back |
| [ 0.000000] 1 base 0080000000 mask FFC0000000 write-back |
| [ 0.000000] 2 base 00F8000000 mask FFFC000000 write-combining |
| [ 0.000000] 3 disabled |
| [ 0.000000] 4 disabled |
| [ 0.000000] 5 disabled |
| [ 0.000000] 6 disabled |
| [ 0.000000] 7 disabled |
| [ 0.000000] TOM2: 0000000140000000 aka 5120M |
| [ 0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106 |
| [ 0.000000] e820: last_pfn = 0xbff9f max_arch_pfn = 0x400000000 |
| [ 0.000000] found SMP MP-table at [mem 0x000f0850-0x000f085f] mapped at [ffff8800000f0850] |
| [ 0.000000] Base memory trampoline at [ffff880000099000] 99000 size 24576 |
| [ 0.000000] init_memory_mapping: [mem 0x00000000-0x000fffff] |
| [ 0.000000] [mem 0x00000000-0x000fffff] page 4k |
| [ 0.000000] BRK [0x01af4000, 0x01af4fff] PGTABLE |
| [ 0.000000] BRK [0x01af5000, 0x01af5fff] PGTABLE |
| [ 0.000000] BRK [0x01af6000, 0x01af6fff] PGTABLE |
| [ 0.000000] init_memory_mapping: [mem 0x13fe00000-0x13fffffff] |
| [ 0.000000] [mem 0x13fe00000-0x13fffffff] page 2M |
| [ 0.000000] BRK [0x01af7000, 0x01af7fff] PGTABLE |
| [ 0.000000] init_memory_mapping: [mem 0x13c000000-0x13fdfffff] |
| [ 0.000000] [mem 0x13c000000-0x13fdfffff] page 2M |
| [ 0.000000] init_memory_mapping: [mem 0x100000000-0x13bffffff] |
| [ 0.000000] [mem 0x100000000-0x13bffffff] page 2M |
| [ 0.000000] init_memory_mapping: [mem 0x00100000-0xbff9efff] |
| [ 0.000000] [mem 0x00100000-0x001fffff] page 4k |
| [ 0.000000] [mem 0x00200000-0xbfdfffff] page 2M |
| [ 0.000000] [mem 0xbfe00000-0xbff9efff] page 4k |
| [ 0.000000] RAMDISK: [mem 0x7f24c000-0x7fffefff] |
| [ 0.000000] ACPI: Early table checksum verification disabled |
| [ 0.000000] ACPI: RSDP 0x00000000000F09F0 000024 (v02 CORE ) |
| [ 0.000000] ACPI: XSDT 0x00000000BFFB00E0 00006C (v01 CORE COREBOOT 00000000 CORE 00000000) |
| [ 0.000000] ACPI: FACP 0x00000000BFFB28D0 000074 (v01 CORE COREBOOT 00000000 CORE 00000000) |
| [ 0.000000] ACPI: DSDT 0x00000000BFFB0280 002648 (v02 ASUS COREBOOT 00000001 INTL 20150619) |
| [ 0.000000] ACPI: FACS 0x00000000BFFB0240 000040 |
| [ 0.000000] ACPI: SSDT 0x00000000BFFB29D0 0006BD (v02 CORE COREBOOT 0000002A CORE 0000002A) |
| [ 0.000000] ACPI: TCPA 0x00000000BFFB3090 000032 (v02 CORE COREBOOT 00000000 CORE 00000000) |
| [ 0.000000] ACPI: APIC 0x00000000BFFB30D0 00008E (v01 CORE COREBOOT 00000000 CORE 00000000) |
| [ 0.000000] ACPI: SRAT 0x00000000BFFB3160 0000E8 (v01 CORE COREBOOT 00000000 CORE 00000000) |
| [ 0.000000] ACPI: SLIT 0x00000000BFFB3250 000030 (v01 CORE COREBOOT 00000000 CORE 00000000) |
| [ 0.000000] ACPI: HPET 0x00000000BFFB3280 000038 (v01 CORE COREBOOT 00000000 CORE 00000000) |
| [ 0.000000] ACPI: SRAT 0x00000000BFFB32C0 0000E8 (v01 CORE COREBOOT 00000000 CORE 00000000) |
| [ 0.000000] ACPI: SLIT 0x00000000BFFB33B0 000030 (v01 CORE COREBOOT 00000000 CORE 00000000) |
| [ 0.000000] ACPI: Local APIC address 0xfee00000 |
| [ 0.000000] SRAT: PXM 0 -> APIC 0x10 -> Node 0 |
| [ 0.000000] SRAT: PXM 0 -> APIC 0x11 -> Node 0 |
| [ 0.000000] SRAT: PXM 1 -> APIC 0x12 -> Node 1 |
| [ 0.000000] SRAT: PXM 1 -> APIC 0x13 -> Node 1 |
| [ 0.000000] SRAT: Node 0 PXM 0 [mem 0x00000000-0x0009ffff] |
| [ 0.000000] SRAT: Node 0 PXM 0 [mem 0x00100000-0xbfffffff] |
| [ 0.000000] SRAT: Node 0 PXM 0 [mem 0x100000000-0x13fffffff] |
| [ 0.000000] NUMA: Initialized distance table, cnt=2 |
| [ 0.000000] NUMA: Node 0 [mem 0x00000000-0x0009ffff] + [mem 0x00100000-0xbfffffff] -> [mem 0x00000000-0xbfffffff] |
| [ 0.000000] NUMA: Node 0 [mem 0x00000000-0xbfffffff] + [mem 0x100000000-0x13fffffff] -> [mem 0x00000000-0x13fffffff] |
| [ 0.000000] Initmem setup node 0 [mem 0x00000000-0x13fffffff] |
| [ 0.000000] NODE_DATA [mem 0x13fff7000-0x13fffbfff] |
| [ 0.000000] [ffffea0000000000-ffffea00045fffff] PMD -> [ffff88013b600000-ffff88013edfffff] on node 0 |
| [ 0.000000] Zone ranges: |
| [ 0.000000] DMA [mem 0x00001000-0x00ffffff] |
| [ 0.000000] DMA32 [mem 0x01000000-0xffffffff] |
| [ 0.000000] Normal [mem 0x100000000-0x13fffffff] |
| [ 0.000000] Movable zone start for each node |
| [ 0.000000] Early memory node ranges |
| [ 0.000000] node 0: [mem 0x00001000-0x0009efff] |
| [ 0.000000] node 0: [mem 0x00100000-0xbff9efff] |
| [ 0.000000] node 0: [mem 0x100000000-0x13fffffff] |
| [ 0.000000] On node 0 totalpages: 1048381 |
| [ 0.000000] DMA zone: 56 pages used for memmap |
| [ 0.000000] DMA zone: 21 pages reserved |
| [ 0.000000] DMA zone: 3998 pages, LIFO batch:0 |
| [ 0.000000] DMA32 zone: 10695 pages used for memmap |
| [ 0.000000] DMA32 zone: 782239 pages, LIFO batch:31 |
| [ 0.000000] Normal zone: 3584 pages used for memmap |
| [ 0.000000] Normal zone: 262144 pages, LIFO batch:31 |
| [ 0.000000] Detected use of extended apic ids on hypertransport bus |
| [ 0.000000] Detected use of extended apic ids on hypertransport bus |
| [ 0.000000] ACPI: PM-Timer IO Port: 0x4008 |
| [ 0.000000] ACPI: Local APIC address 0xfee00000 |
| [ 0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x10] enabled) |
| [ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x11] enabled) |
| [ 0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x12] enabled) |
| [ 0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x13] enabled) |
| [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1]) |
| [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1]) |
| [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x02] high edge lint[0x1]) |
| [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x03] high edge lint[0x1]) |
| [ 0.000000] ACPI: IOAPIC (id[0x08] address[0xfec00000] gsi_base[0]) |
| [ 0.000000] IOAPIC[0]: apic_id 8, version 17, address 0xfec00000, GSI 0-23 |
| [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level) |
| [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 14 global_irq 14 high edge) |
| [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 15 global_irq 15 high edge) |
| [ 0.000000] ACPI: IRQ9 used by override. |
| [ 0.000000] ACPI: IRQ14 used by override. |
| [ 0.000000] ACPI: IRQ15 used by override. |
| [ 0.000000] Using ACPI (MADT) for SMP configuration information |
| [ 0.000000] ACPI: HPET id: 0x10de8201 base: 0xfed00000 |
| [ 0.000000] smpboot: Allowing 4 CPUs, 0 hotplug CPUs |
| [ 0.000000] nr_irqs_gsi: 40 |
| [ 0.000000] PM: Registered nosave memory: [mem 0x0009f000-0x0009ffff] |
| [ 0.000000] PM: Registered nosave memory: [mem 0x000a0000-0x000effff] |
| [ 0.000000] PM: Registered nosave memory: [mem 0x000f0000-0x000fffff] |
| [ 0.000000] PM: Registered nosave memory: [mem 0xbff9f000-0xbfffffff] |
| [ 0.000000] PM: Registered nosave memory: [mem 0xc0000000-0xffffffff] |
| [ 0.000000] e820: [mem 0xc0000000-0xffffffff] available for PCI devices |
| [ 0.000000] Booting paravirtualized kernel on bare hardware |
| [ 0.000000] setup_percpu: NR_CPUS:512 nr_cpumask_bits:512 nr_cpu_ids:4 nr_node_ids:2 |
| [ 0.000000] PERCPU: Embedded 27 pages/cpu @ffff88013fc00000 s80896 r8192 d21504 u524288 |
| [ 0.000000] pcpu-alloc: s80896 r8192 d21504 u524288 alloc=1*2097152 |
| [ 0.000000] pcpu-alloc: [0] 0 1 2 3 |
| [ 0.000000] Built 1 zonelists in Node order, mobility grouping on. Total pages: 1034025 |
| [ 0.000000] Policy zone: Normal |
| [ 0.000000] Kernel command line: root=/dev/nfs initrd=initrd-cb-test-tgt-x86_64 rootfstype=nfs nfsroot=10.100.1.100:/nfsroots/cb-test-tgt-03,v3,hard,nointr,tcp ip=10.100.1.12::10.100.1.1:255.255.255.0:embed-o-matic:eth0:off console=ttyS0,115200n8 consoleblank=0 rw BOOT_IMAGE=vmlinuz-cb-test-tgt-x86_64 |
| [ 0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes) |
| [ 0.000000] AGP: Checking aperture... |
| [ 0.000000] AGP: No AGP bridge found |
| [ 0.000000] AGP: Node 0: aperture [bus addr 0xeb80000000-0xeb81ffffff] (32MB) |
| [ 0.000000] Aperture beyond 4GB. Ignoring. |
| [ 0.000000] AGP: Your BIOS doesn't leave a aperture memory hole |
| [ 0.000000] AGP: Please enable the IOMMU option in the BIOS setup |
| [ 0.000000] AGP: This costs you 64MB of RAM |
| [ 0.000000] AGP: Mapping aperture over RAM [mem 0xb4000000-0xb7ffffff] (65536KB) |
| [ 0.000000] PM: Registered nosave memory: [mem 0xb4000000-0xb7ffffff] |
| [ 0.000000] Memory: 3978532K/4193524K available (5207K kernel code, 946K rwdata, 1832K rodata, 1204K init, 840K bss, 214992K reserved) |
| [ 0.000000] Hierarchical RCU implementation. |
| [ 0.000000] RCU dyntick-idle grace-period acceleration is enabled. |
| [ 0.000000] RCU restricting CPUs from NR_CPUS=512 to nr_cpu_ids=4. |
| [ 0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=4 |
| [ 0.000000] NR_IRQS:33024 nr_irqs:712 16 |
| [ 0.000000] spurious 8259A interrupt: IRQ7. |
| [ 0.000000] Console: colour VGA+ 80x25 |
| [ 0.000000] console [ttyS0] enabled |
| [ 0.000000] mempolicy: Disabling automatic NUMA balancing. Configure with numa_balancing= or the kernel.numa_balancing sysctl |
| [ 0.000000] hpet clockevent registered |
| [ 0.000000] tsc: Fast TSC calibration using PIT |
| [ 0.000000] tsc: Detected 3015.535 MHz processor |
| [ 0.000000] tsc: Marking TSC unstable due to TSCs unsynchronized |
| [ 0.016000] Calibrating delay loop (skipped), value calculated using timer frequency.. 6031.07 BogoMIPS (lpj=12062140) |
| [ 0.018886] pid_max: default: 32768 minimum: 301 |
| [ 0.020012] ACPI: Core revision 20140424 |
| [ 0.025663] ACPI: All ACPI Tables successfully acquired |
| [ 0.028234] Security Framework initialized |
| [ 0.032013] AppArmor: AppArmor disabled by boot time parameter |
| [ 0.036001] Yama: disabled by default; enable with sysctl kernel.yama.* |
| [ 0.044271] Dentry cache hash table entries: 524288 (order: 10, 4194304 bytes) |
| [ 0.054006] Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes) |
| [ 0.057128] Mount-cache hash table entries: 8192 (order: 4, 65536 bytes) |
| [ 0.060011] Mountpoint-cache hash table entries: 8192 (order: 4, 65536 bytes) |
| [ 0.064356] Initializing cgroup subsys memory |
| [ 0.068010] Initializing cgroup subsys devices |
| [ 0.072010] Initializing cgroup subsys freezer |
| [ 0.076004] Initializing cgroup subsys net_cls |
| [ 0.080007] Initializing cgroup subsys blkio |
| [ 0.084006] Initializing cgroup subsys perf_event |
| [ 0.088003] Initializing cgroup subsys net_prio |
| [ 0.092029] tseg: 0000000000 |
| [ 0.092036] CPU: Physical Processor ID: 0 |
| [ 0.096001] CPU: Processor Core ID: 0 |
| [ 0.100002] mce: CPU supports 5 MCE banks |
| [ 0.104008] LVT offset 0 assigned for vector 0xf9 |
| [ 0.108003] process: using AMD E400 aware idle routine |
| [ 0.112003] Last level iTLB entries: 4KB 512, 2MB 8, 4MB 4 |
| Last level dTLB entries: 4KB 512, 2MB 8, 4MB 4, 1GB 0 |
| tlb_flushall_shift: 6 |
| [ 0.116080] Freeing SMP alternatives memory: 20K (ffffffff81a1b000 - ffffffff81a20000) |
| [ 0.120695] ftrace: allocating 21614 entries in 85 pages |
| [ 0.132431] ..TIMER: vector=0x30 apic1=0 pin1=0 apic2=0 pin2=0 |
| [ 0.178586] smpboot: CPU0: Dual-Core AMD Opteron(tm) Processor 8222 (fam: 0f, model: 41, stepping: 03) |
| [ 0.188000] Performance Events: AMD PMU driver. |
| [ 0.188002] ... version: 0 |
| [ 0.192000] ... bit width: 48 |
| [ 0.196000] ... generic registers: 4 |
| [ 0.200000] ... value mask: 0000ffffffffffff |
| [ 0.204000] ... max period: 00007fffffffffff |
| [ 0.208000] ... fixed-purpose events: 0 |
| [ 0.212000] ... event mask: 000000000000000f |
| [ 0.217511] NMI watchdog: enabled on all CPUs, permanently consumes one hw-PMU counter. |
| [ 0.220156] x86: Booting SMP configuration: |
| [ 0.224002] .... node #0, CPUs: #1 #2 #3 |
| [ 0.496067] x86: Booted up 1 node, 4 CPUs |
| [ 0.500002] smpboot: Total of 4 processors activated (24123.61 BogoMIPS) |
| [ 0.508104] devtmpfs: initialized |
| [ 0.517240] pinctrl core: initialized pinctrl subsystem |
| [ 0.520095] NET: Registered protocol family 16 |
| [ 0.524142] cpuidle: using governor ladder |
| [ 0.528002] cpuidle: using governor menu |
| [ 0.532006] node 0 link 1: io port [1000, 5fff] |
| [ 0.532008] TOM: 00000000c0000000 aka 3072M |
| [ 0.536002] node 0 link 1: mmio [a0000, bffff] |
| [ 0.536004] node 0 link 1: mmio [fc000000, fc5fffff] |
| [ 0.536006] node 0 link 1: mmio [f8000000, fbffffff] |
| [ 0.536007] TOM2: 0000000140000000 aka 5120M |
| [ 0.540002] bus: [bus 00-08] on node 0 link 1 |
| [ 0.540003] bus: 00 [io 0x0000-0xffff] |
| [ 0.540004] bus: 00 [mem 0x000a0000-0x000bffff] |
| [ 0.540006] bus: 00 [mem 0xc0000000-0xffffffff] |
| [ 0.540007] bus: 00 [mem 0x140000000-0xfcffffffff] |
| [ 0.540061] ACPI: bus type PCI registered |
| [ 0.544002] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5 |
| [ 0.548095] PCI: Using configuration type 1 for base access |
| [ 0.568087] ACPI: Added _OSI(Module Device) |
| [ 0.572002] ACPI: Added _OSI(Processor Device) |
| [ 0.576001] ACPI: Added _OSI(3.0 _SCP Extensions) |
| [ 0.580001] ACPI: Added _OSI(Processor Aggregator Device) |
| [ 0.589116] ACPI: Interpreter enabled |
| [ 0.592009] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S2_] (20140424/hwxface-580) |
| [ 0.600001] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S3_] (20140424/hwxface-580) |
| [ 0.610188] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S4_] (20140424/hwxface-580) |
| [ 0.620004] ACPI: (supports S0 S1 S5) |
| [ 0.624001] ACPI: Using IOAPIC for interrupt routing |
| [ 0.628030] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug |
| [ 0.637583] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-08]) |
| [ 0.640005] acpi PNP0A03:00: _OSC: OS supports [ASPM ClockPM Segments MSI] |
| [ 0.644012] acpi PNP0A03:00: _OSC: not requesting OS control; OS requires [ExtendedConfig ASPM ClockPM MSI] |
| [ 0.649629] acpi PNP0A03:00: host bridge window expanded to [io 0x0000-0x0cf7]; [io 0x03b0-0x03df] ignored |
| [ 0.652005] acpi PNP0A03:00: fail to add MMCONFIG information, can't access extended PCI configuration space under this bridge. |
| [ 0.656115] PCI host bridge to bus 0000:00 |
| [ 0.660002] pci_bus 0000:00: root bus resource [bus 00-08] |
| [ 0.664002] pci_bus 0000:00: root bus resource [io 0x0d00-0x5fff] |
| [ 0.668002] pci_bus 0000:00: root bus resource [mem 0xf8000000-0xfbffffff] |
| [ 0.672001] pci_bus 0000:00: root bus resource [mem 0xfc000000-0xfc5fffff] |
| [ 0.676002] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff] |
| [ 0.680001] pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7] |
| [ 0.684010] pci 0000:00:00.0: [10de:005e] type 00 class 0x058000 |
| [ 0.684124] pci 0000:00:01.0: [10de:0051] type 00 class 0x060100 |
| [ 0.684129] pci 0000:00:01.0: reg 0x10: [io 0x4c00-0x4c7f] |
| [ 0.684203] pci 0000:00:01.1: [10de:0052] type 00 class 0x0c0500 |
| [ 0.684209] pci 0000:00:01.1: reg 0x10: [io 0x5000-0x501f] |
| [ 0.684218] pci 0000:00:01.1: reg 0x20: [io 0x4c80-0x4cbf] |
| [ 0.684221] pci 0000:00:01.1: reg 0x24: [io 0x4cc0-0x4cff] |
| [ 0.684232] pci 0000:00:01.1: PME# supported from D3hot D3cold |
| [ 0.684299] pci 0000:00:02.0: [10de:005a] type 00 class 0x0c0310 |
| [ 0.684305] pci 0000:00:02.0: reg 0x10: [mem 0xfc500000-0xfc500fff] |
| [ 0.684325] pci 0000:00:02.0: supports D1 D2 |
| [ 0.684326] pci 0000:00:02.0: PME# supported from D0 D1 D2 D3hot D3cold |
| [ 0.684356] pci 0000:00:02.0: System wakeup disabled by ACPI |
| [ 0.688041] pci 0000:00:02.1: [10de:005b] type 00 class 0x0c0320 |
| [ 0.688048] pci 0000:00:02.1: reg 0x10: [mem 0xfc503000-0xfc5030ff] |
| [ 0.688072] pci 0000:00:02.1: supports D1 D2 |
| [ 0.688074] pci 0000:00:02.1: PME# supported from D0 D1 D2 D3hot D3cold |
| [ 0.688105] pci 0000:00:02.1: System wakeup disabled by ACPI |
| [ 0.692044] pci 0000:00:06.0: [10de:0053] type 00 class 0x01018a |
| [ 0.692056] pci 0000:00:06.0: reg 0x20: [io 0x5020-0x502f] |
| [ 0.692063] pci 0000:00:06.0: legacy IDE quirk: reg 0x10: [io 0x01f0-0x01f7] |
| [ 0.696005] pci 0000:00:06.0: legacy IDE quirk: reg 0x14: [io 0x03f6] |
| [ 0.700001] pci 0000:00:06.0: legacy IDE quirk: reg 0x18: [io 0x0170-0x0177] |
| [ 0.704001] pci 0000:00:06.0: legacy IDE quirk: reg 0x1c: [io 0x0376] |
| [ 0.708064] pci 0000:00:07.0: [10de:0054] type 00 class 0x010185 |
| [ 0.708070] pci 0000:00:07.0: reg 0x10: [io 0x5050-0x5057] |
| [ 0.708073] pci 0000:00:07.0: reg 0x14: [io 0x5070-0x5073] |
| [ 0.708077] pci 0000:00:07.0: reg 0x18: [io 0x5058-0x505f] |
| [ 0.708080] pci 0000:00:07.0: reg 0x1c: [io 0x5074-0x5077] |
| [ 0.708084] pci 0000:00:07.0: reg 0x20: [io 0x5030-0x503f] |
| [ 0.708087] pci 0000:00:07.0: reg 0x24: [mem 0xfc501000-0xfc501fff] |
| [ 0.708152] pci 0000:00:08.0: [10de:0055] type 00 class 0x010185 |
| [ 0.708158] pci 0000:00:08.0: reg 0x10: [io 0x5060-0x5067] |
| [ 0.708161] pci 0000:00:08.0: reg 0x14: [io 0x5078-0x507b] |
| [ 0.708165] pci 0000:00:08.0: reg 0x18: [io 0x5068-0x506f] |
| [ 0.708168] pci 0000:00:08.0: reg 0x1c: [io 0x507c-0x507f] |
| [ 0.708172] pci 0000:00:08.0: reg 0x20: [io 0x5040-0x504f] |
| [ 0.708175] pci 0000:00:08.0: reg 0x24: [mem 0xfc502000-0xfc502fff] |
| [ 0.708239] pci 0000:00:09.0: [10de:005c] type 01 class 0x060400 |
| [ 0.708279] pci 0000:00:09.0: System wakeup disabled by ACPI |
| [ 0.712042] pci 0000:00:0b.0: [10de:005d] type 01 class 0x060400 |
| [ 0.712062] pci 0000:00:0b.0: PME# supported from D0 D1 D2 D3hot D3cold |
| [ 0.712093] pci 0000:00:0b.0: System wakeup disabled by ACPI |
| [ 0.716042] pci 0000:00:0c.0: [10de:005d] type 01 class 0x060400 |
| [ 0.716062] pci 0000:00:0c.0: PME# supported from D0 D1 D2 D3hot D3cold |
| [ 0.716092] pci 0000:00:0c.0: System wakeup disabled by ACPI |
| [ 0.720042] pci 0000:00:0d.0: [10de:005d] type 01 class 0x060400 |
| [ 0.720060] pci 0000:00:0d.0: PME# supported from D0 D1 D2 D3hot D3cold |
| [ 0.720091] pci 0000:00:0d.0: System wakeup disabled by ACPI |
| [ 0.724042] pci 0000:00:0e.0: [10de:005d] type 01 class 0x060400 |
| [ 0.724061] pci 0000:00:0e.0: PME# supported from D0 D1 D2 D3hot D3cold |
| [ 0.724092] pci 0000:00:0e.0: System wakeup disabled by ACPI |
| [ 0.728047] pci 0000:00:18.0: [1022:1100] type 00 class 0x060000 |
| [ 0.728115] pci 0000:00:18.1: [1022:1101] type 00 class 0x060000 |
| [ 0.728177] pci 0000:00:18.2: [1022:1102] type 00 class 0x060000 |
| [ 0.728239] pci 0000:00:18.3: [1022:1103] type 00 class 0x060000 |
| [ 0.728303] pci 0000:00:19.0: [1022:1100] type 00 class 0x060000 |
| [ 0.728370] pci 0000:00:19.1: [1022:1101] type 00 class 0x060000 |
| [ 0.728431] pci 0000:00:19.2: [1022:1102] type 00 class 0x060000 |
| [ 0.728493] pci 0000:00:19.3: [1022:1103] type 00 class 0x060000 |
| [ 0.728593] pci 0000:01:04.0: [18ca:0020] type 00 class 0x030000 |
| [ 0.728603] pci 0000:01:04.0: reg 0x10: [mem 0xf8000000-0xfbffffff pref] |
| [ 0.728608] pci 0000:01:04.0: reg 0x14: [mem 0xfc200000-0xfc23ffff] |
| [ 0.728614] pci 0000:01:04.0: reg 0x18: [io 0x3000-0x307f] |
| [ 0.728644] pci 0000:01:04.0: supports D1 D2 |
| [ 0.728697] pci 0000:00:09.0: PCI bridge to [bus 01] |
| [ 0.732002] pci 0000:00:09.0: bridge window [io 0x3000-0x3fff] |
| [ 0.732005] pci 0000:00:09.0: bridge window [mem 0xfc200000-0xfc2fffff] |
| [ 0.732007] pci 0000:00:09.0: bridge window [mem 0xf8000000-0xfbffffff pref] |
| [ 0.732058] pci 0000:02:00.0: [14e4:1659] type 00 class 0x020000 |
| [ 0.732070] pci 0000:02:00.0: reg 0x10: [mem 0xfc300000-0xfc30ffff 64bit] |
| [ 0.732093] pci 0000:02:00.0: reg 0x30: [mem 0x0d000000-0x0d00ffff pref] |
| [ 0.732133] pci 0000:02:00.0: PME# supported from D3hot D3cold |
| [ 0.732185] pci 0000:02:00.0: disabling ASPM on pre-1.1 PCIe device. You can enable it with 'pcie_aspm=force' |
| [ 0.736007] pci 0000:00:0b.0: PCI bridge to [bus 02] |
| [ 0.740003] pci 0000:00:0b.0: bridge window [mem 0xfc300000-0xfc3fffff] |
| [ 0.740055] pci 0000:03:00.0: [14e4:1659] type 00 class 0x020000 |
| [ 0.740066] pci 0000:03:00.0: reg 0x10: [mem 0xfc400000-0xfc40ffff 64bit] |
| [ 0.740127] pci 0000:03:00.0: PME# supported from D3hot D3cold |
| [ 0.740179] pci 0000:03:00.0: disabling ASPM on pre-1.1 PCIe device. You can enable it with 'pcie_aspm=force' |
| [ 0.744005] pci 0000:00:0c.0: PCI bridge to [bus 03] |
| [ 0.748003] pci 0000:00:0c.0: bridge window [mem 0xfc400000-0xfc4fffff] |
| [ 0.748042] pci 0000:00:0d.0: PCI bridge to [bus 04] |
| [ 0.752047] pci 0000:05:00.0: [111d:8018] type 01 class 0x060400 |
| [ 0.752088] pci 0000:05:00.0: PME# supported from D0 D3hot D3cold |
| [ 0.752135] pci 0000:05:00.0: disabling ASPM on pre-1.1 PCIe device. You can enable it with 'pcie_aspm=force' |
| [ 0.756005] pci 0000:00:0e.0: PCI bridge to [bus 05-08] |
| [ 0.760002] pci 0000:00:0e.0: bridge window [io 0x1000-0x2fff] |
| [ 0.760005] pci 0000:00:0e.0: bridge window [mem 0xfc000000-0xfc1fffff] |
| [ 0.760050] pci 0000:06:00.0: [111d:8018] type 01 class 0x060400 |
| [ 0.760099] pci 0000:06:00.0: PME# supported from D0 D3hot D3cold |
| [ 0.760147] pci 0000:06:00.0: disabling ASPM on pre-1.1 PCIe device. You can enable it with 'pcie_aspm=force' |
| [ 0.764008] pci 0000:06:01.0: [111d:8018] type 01 class 0x060400 |
| [ 0.764057] pci 0000:06:01.0: PME# supported from D0 D3hot D3cold |
| [ 0.764106] pci 0000:06:00.0: disabling ASPM on pre-1.1 PCIe device. You can enable it with 'pcie_aspm=force' |
| [ 0.768020] pci 0000:05:00.0: PCI bridge to [bus 06-08] |
| [ 0.772005] pci 0000:05:00.0: bridge window [io 0x1000-0x2fff] |
| [ 0.772009] pci 0000:05:00.0: bridge window [mem 0xfc000000-0xfc1fffff] |
| [ 0.772071] pci 0000:07:00.0: [8086:10bc] type 00 class 0x020000 |
| [ 0.772083] pci 0000:07:00.0: reg 0x10: [mem 0xfc000000-0xfc01ffff] |
| [ 0.772093] pci 0000:07:00.0: reg 0x14: [mem 0xfc020000-0xfc03ffff] |
| [ 0.772102] pci 0000:07:00.0: reg 0x18: [io 0x1000-0x101f] |
| [ 0.772134] pci 0000:07:00.0: reg 0x30: [mem 0xfc040000-0xfc05ffff pref] |
| [ 0.772176] pci 0000:07:00.0: PME# supported from D0 D3hot D3cold |
| [ 0.772239] pci 0000:07:00.1: [8086:10bc] type 00 class 0x020000 |
| [ 0.772251] pci 0000:07:00.1: reg 0x10: [mem 0xfc060000-0xfc07ffff] |
| [ 0.772261] pci 0000:07:00.1: reg 0x14: [mem 0xfc080000-0xfc09ffff] |
| [ 0.772270] pci 0000:07:00.1: reg 0x18: [io 0x1020-0x103f] |
| [ 0.772302] pci 0000:07:00.1: reg 0x30: [mem 0xfc0a0000-0xfc0bffff pref] |
| [ 0.772344] pci 0000:07:00.1: PME# supported from D0 D3hot D3cold |
| [ 0.776048] pci 0000:07:00.0: disabling ASPM on pre-1.1 PCIe device. You can enable it with 'pcie_aspm=force' |
| [ 0.780009] pci 0000:06:00.0: PCI bridge to [bus 07] |
| [ 0.784005] pci 0000:06:00.0: bridge window [io 0x1000-0x1fff] |
| [ 0.784009] pci 0000:06:00.0: bridge window [mem 0xfc000000-0xfc0fffff] |
| [ 0.784072] pci 0000:08:00.0: [8086:10bc] type 00 class 0x020000 |
| [ 0.784085] pci 0000:08:00.0: reg 0x10: [mem 0xfc100000-0xfc11ffff] |
| [ 0.784094] pci 0000:08:00.0: reg 0x14: [mem 0xfc120000-0xfc13ffff] |
| [ 0.784103] pci 0000:08:00.0: reg 0x18: [io 0x2000-0x201f] |
| [ 0.784135] pci 0000:08:00.0: reg 0x30: [mem 0xfc140000-0xfc15ffff pref] |
| [ 0.784177] pci 0000:08:00.0: PME# supported from D0 D3hot |
| [ 0.784240] pci 0000:08:00.1: [8086:10bc] type 00 class 0x020000 |
| [ 0.784252] pci 0000:08:00.1: reg 0x10: [mem 0xfc160000-0xfc17ffff] |
| [ 0.784261] pci 0000:08:00.1: reg 0x14: [mem 0xfc180000-0xfc19ffff] |
| [ 0.784271] pci 0000:08:00.1: reg 0x18: [io 0x2020-0x203f] |
| [ 0.784303] pci 0000:08:00.1: reg 0x30: [mem 0xfc1a0000-0xfc1bffff pref] |
| [ 0.784344] pci 0000:08:00.1: PME# supported from D0 D3hot |
| [ 0.784401] pci 0000:08:00.0: disabling ASPM on pre-1.1 PCIe device. You can enable it with 'pcie_aspm=force' |
| [ 0.788009] pci 0000:06:01.0: PCI bridge to [bus 08] |
| [ 0.792005] pci 0000:06:01.0: bridge window [io 0x2000-0x2fff] |
| [ 0.792009] pci 0000:06:01.0: bridge window [mem 0xfc100000-0xfc1fffff] |
| [ 0.792045] pci_bus 0000:00: on NUMA node 0 |
| [ 0.792102] ACPI: PCI Interrupt Link [LNKA] (IRQs *16 17 18 19) |
| [ 0.800347] ACPI: PCI Interrupt Link [LNKB] (IRQs 16 *17 18 19) |
| [ 0.805548] ACPI: PCI Interrupt Link [LNKC] (IRQs 16 17 18 19) *0, disabled. |
| [ 0.813600] ACPI: PCI Interrupt Link [LNKD] (IRQs 16 17 18 19) *0, disabled. |
| [ 0.820247] ACPI: PCI Interrupt Link [LNKE] (IRQs 16 17 18 19) *0, disabled. |
| [ 0.828247] ACPI: PCI Interrupt Link [LLAS] (IRQs 20 21 22 23) *0, disabled. |
| [ 0.834711] ACPI: PCI Interrupt Link [LUOH] (IRQs 20 21 22 *23) |
| [ 0.837545] ACPI: PCI Interrupt Link [LUEH] (IRQs 20 21 *22 23) |
| [ 0.841548] ACPI: PCI Interrupt Link [LAUD] (IRQs 20 21 22 23) *0, disabled. |
| [ 0.846711] ACPI: PCI Interrupt Link [LMOD] (IRQs 20 21 22 23) *0, disabled. |
| [ 0.853877] ACPI: PCI Interrupt Link [LPA0] (IRQs 20 21 22 23) *0, disabled. |
| [ 0.861216] ACPI: PCI Interrupt Link [LSA0] (IRQs 20 *21 22 23) |
| [ 0.865542] ACPI: PCI Interrupt Link [LSA1] (IRQs *20 21 22 23) |
| [ 0.873188] ACPI: PCI Interrupt Link [LEMA] (IRQs 20 21 22 23) *0, disabled. |
| [ 0.880246] ACPI: PCI Interrupt Link [LUB0] (IRQs 20 21 22 23) *0, disabled. |
| [ 0.886711] ACPI: PCI Interrupt Link [LUB2] (IRQs 20 21 22 23) *0, disabled. |
| [ 0.890711] ACPI: PCI Interrupt Link [LKSM] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled. |
| [ 0.899561] ACPI: PCI Interrupt Link [LNIA] (IRQs 16) *0, disabled. |
| [ 0.901877] ACPI: PCI Interrupt Link [LNIB] (IRQs 17) *0, disabled. |
| [ 0.908246] ACPI: PCI Interrupt Link [LNIC] (IRQs 18) *0, disabled. |
| [ 0.913877] ACPI: PCI Interrupt Link [LNND] (IRQs 19) *0, disabled. |
| [ 0.920405] ACPI: Enabled 1 GPEs in block 00 to 1F |
| [ 0.924096] vgaarb: setting as boot device: PCI:0000:01:04.0 |
| [ 0.928000] vgaarb: device added: PCI:0000:01:04.0,decodes=io+mem,owns=io+mem,locks=none |
| [ 0.940009] vgaarb: loaded |
| [ 0.942716] vgaarb: bridge control possible 0000:01:04.0 |
| [ 0.948117] PCI: Using ACPI for IRQ routing |
| [ 0.952004] PCI: pci_cache_line_size set to 64 bytes |
| [ 0.952064] e820: reserve RAM buffer [mem 0x0009fc00-0x0009ffff] |
| [ 0.952067] e820: reserve RAM buffer [mem 0xbff9f000-0xbfffffff] |
| [ 0.952258] HPET: 3 timers in total, 0 timers will be used for per-cpu timer |
| [ 0.956005] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 31 |
| [ 0.964554] hpet0: 3 comparators, 32-bit 25.000000 MHz counter |
| [ 0.972040] Switched to clocksource hpet |
| [ 0.984385] pnp: PnP ACPI init |
| [ 0.987457] ACPI: bus type PNP registered |
| [ 0.991851] pnp 00:00: Plug and Play ACPI device, IDs PNP0303 PNP030b (active) |
| [ 0.991904] pnp 00:01: Plug and Play ACPI device, IDs PNP0f03 PNP0f13 (active) |
| [ 0.991961] pnp 00:02: Plug and Play ACPI device, IDs PNP0501 (active) |
| [ 0.992020] pnp 00:03: Plug and Play ACPI device, IDs PNP0501 (active) |
| [ 0.992051] pnp 00:04: [dma 2] |
| [ 0.992078] pnp 00:04: Plug and Play ACPI device, IDs PNP0700 (active) |
| [ 0.992094] pnp: PnP ACPI: found 5 devices |
| [ 0.996186] ACPI: bus type PNP unregistered |
| [ 1.007714] pci 0000:02:00.0: can't claim BAR 6 [mem 0x0d000000-0x0d00ffff pref]: no compatible bridge window |
| [ 1.017671] pci 0000:00:09.0: PCI bridge to [bus 01] |
| [ 1.022639] pci 0000:00:09.0: bridge window [io 0x3000-0x3fff] |
| [ 1.028730] pci 0000:00:09.0: bridge window [mem 0xfc200000-0xfc2fffff] |
| [ 1.035516] pci 0000:00:09.0: bridge window [mem 0xf8000000-0xfbffffff pref] |
| [ 1.042743] pci 0000:02:00.0: BAR 6: assigned [mem 0xfc310000-0xfc31ffff pref] |
| [ 1.049956] pci 0000:00:0b.0: PCI bridge to [bus 02] |
| [ 1.054920] pci 0000:00:0b.0: bridge window [mem 0xfc300000-0xfc3fffff] |
| [ 1.061707] pci 0000:00:0c.0: PCI bridge to [bus 03] |
| [ 1.066673] pci 0000:00:0c.0: bridge window [mem 0xfc400000-0xfc4fffff] |
| [ 1.073460] pci 0000:00:0d.0: PCI bridge to [bus 04] |
| [ 1.078428] pci 0000:06:00.0: PCI bridge to [bus 07] |
| [ 1.083390] pci 0000:06:00.0: bridge window [io 0x1000-0x1fff] |
| [ 1.089487] pci 0000:06:00.0: bridge window [mem 0xfc000000-0xfc0fffff] |
| [ 1.096275] pci 0000:06:01.0: PCI bridge to [bus 08] |
| [ 1.101235] pci 0000:06:01.0: bridge window [io 0x2000-0x2fff] |
| [ 1.107330] pci 0000:06:01.0: bridge window [mem 0xfc100000-0xfc1fffff] |
| [ 1.114119] pci 0000:05:00.0: PCI bridge to [bus 06-08] |
| [ 1.119340] pci 0000:05:00.0: bridge window [io 0x1000-0x2fff] |
| [ 1.125435] pci 0000:05:00.0: bridge window [mem 0xfc000000-0xfc1fffff] |
| [ 1.132223] pci 0000:00:0e.0: PCI bridge to [bus 05-08] |
| [ 1.137445] pci 0000:00:0e.0: bridge window [io 0x1000-0x2fff] |
| [ 1.143537] pci 0000:00:0e.0: bridge window [mem 0xfc000000-0xfc1fffff] |
| [ 1.150326] pci_bus 0000:00: resource 4 [io 0x0d00-0x5fff] |
| [ 1.150328] pci_bus 0000:00: resource 5 [mem 0xf8000000-0xfbffffff] |
| [ 1.150330] pci_bus 0000:00: resource 6 [mem 0xfc000000-0xfc5fffff] |
| [ 1.150332] pci_bus 0000:00: resource 7 [mem 0x000a0000-0x000bffff] |
| [ 1.150334] pci_bus 0000:00: resource 8 [io 0x0000-0x0cf7] |
| [ 1.150336] pci_bus 0000:01: resource 0 [io 0x3000-0x3fff] |
| [ 1.150338] pci_bus 0000:01: resource 1 [mem 0xfc200000-0xfc2fffff] |
| [ 1.150340] pci_bus 0000:01: resource 2 [mem 0xf8000000-0xfbffffff pref] |
| [ 1.150342] pci_bus 0000:02: resource 1 [mem 0xfc300000-0xfc3fffff] |
| [ 1.150344] pci_bus 0000:03: resource 1 [mem 0xfc400000-0xfc4fffff] |
| [ 1.150347] pci_bus 0000:05: resource 0 [io 0x1000-0x2fff] |
| [ 1.150348] pci_bus 0000:05: resource 1 [mem 0xfc000000-0xfc1fffff] |
| [ 1.150351] pci_bus 0000:06: resource 0 [io 0x1000-0x2fff] |
| [ 1.150352] pci_bus 0000:06: resource 1 [mem 0xfc000000-0xfc1fffff] |
| [ 1.150355] pci_bus 0000:07: resource 0 [io 0x1000-0x1fff] |
| [ 1.150356] pci_bus 0000:07: resource 1 [mem 0xfc000000-0xfc0fffff] |
| [ 1.150359] pci_bus 0000:08: resource 0 [io 0x2000-0x2fff] |
| [ 1.150360] pci_bus 0000:08: resource 1 [mem 0xfc100000-0xfc1fffff] |
| [ 1.150436] NET: Registered protocol family 2 |
| [ 1.155117] TCP established hash table entries: 32768 (order: 6, 262144 bytes) |
| [ 1.162546] TCP bind hash table entries: 32768 (order: 7, 524288 bytes) |
| [ 1.169464] TCP: Hash tables configured (established 32768 bind 32768) |
| [ 1.176085] TCP: reno registered |
| [ 1.179319] UDP hash table entries: 2048 (order: 4, 65536 bytes) |
| [ 1.185372] UDP-Lite hash table entries: 2048 (order: 4, 65536 bytes) |
| [ 1.191979] NET: Registered protocol family 1 |
| [ 1.196624] ACPI: PCI Interrupt Link [LUB0] enabled at IRQ 23 |
| [ 1.202595] ACPI: PCI Interrupt Link [LUB2] enabled at IRQ 22 |
| [ 1.208437] pci 0000:00:00.0: Found enabled HT MSI Mapping |
| [ 1.213943] pci 0000:00:00.0: Found enabled HT MSI Mapping |
| [ 1.219424] pci 0000:00:0b.0: Found disabled HT MSI Mapping |
| [ 1.225000] pci 0000:00:00.0: Found enabled HT MSI Mapping |
| [ 1.230509] pci 0000:00:00.0: Found enabled HT MSI Mapping |
| [ 1.235995] pci 0000:00:0c.0: Found disabled HT MSI Mapping |
| [ 1.241570] pci 0000:00:00.0: Found enabled HT MSI Mapping |
| [ 1.247081] pci 0000:00:00.0: Found enabled HT MSI Mapping |
| [ 1.252566] pci 0000:00:0d.0: Found disabled HT MSI Mapping |
| [ 1.258140] pci 0000:00:00.0: Found enabled HT MSI Mapping |
| [ 1.263655] pci 0000:00:00.0: Found enabled HT MSI Mapping |
| [ 1.269137] pci 0000:00:0e.0: Found disabled HT MSI Mapping |
| [ 1.274710] pci 0000:00:00.0: Found enabled HT MSI Mapping |
| [ 1.280212] pci 0000:01:04.0: Video device with shadowed ROM |
| [ 1.280237] PCI: CLS 64 bytes, default 64 |
| [ 1.280317] Unpacking initramfs... |
| [ 1.553099] Freeing initrd memory: 14028K (ffff88007f24c000 - ffff88007ffff000) |
| [ 1.560826] PCI-DMA: Disabling AGP. |
| [ 1.564449] PCI-DMA: aperture base @ b4000000 size 65536 KB |
| [ 1.570036] PCI-DMA: using GART IOMMU. |
| [ 1.573802] PCI-DMA: Reserving 64MB of IOMMU area in the AGP aperture |
| [ 1.583242] platform rtc_cmos: registered platform RTC device (no PNP device found) |
| [ 1.591043] microcode: AMD CPU family 0xf not supported |
| [ 1.596659] futex hash table entries: 1024 (order: 4, 65536 bytes) |
| [ 1.602911] audit: initializing netlink subsys (disabled) |
| [ 1.608341] audit: type=2000 audit(1467061623.608:1): initialized |
| [ 1.614895] HugeTLB registered 2 MB page size, pre-allocated 0 pages |
| [ 1.621270] zbud: loaded |
| [ 1.624017] VFS: Disk quotas dquot_6.5.2 |
| [ 1.627966] Dquot-cache hash table entries: 512 (order 0, 4096 bytes) |
| [ 1.634473] msgmni has been set to 7926 |
| [ 1.638751] alg: No test for stdrng (krng) |
| [ 1.642902] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252) |
| [ 1.650369] io scheduler noop registered |
| [ 1.654292] io scheduler deadline registered |
| [ 1.658612] io scheduler cfq registered (default) |
| [ 1.663596] pci_hotplug: PCI Hot Plug PCI Core version: 0.5 |
| [ 1.669179] pciehp: PCI Express Hot Plug Controller Driver version: 0.4 |
| [ 1.675858] GHES: HEST is not enabled! |
| [ 1.679692] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled |
| [ 1.706233] 00:02: ttyS0 at I/O 0x3f8 (irq = 4, base_baud = 115200) is a 16550A |
| [ 1.733842] 00:03: ttyS1 at I/O 0x2f8 (irq = 3, base_baud = 115200) is a 16550A |
| [ 1.741586] Linux agpgart interface v0.103 |
| [ 1.745799] i8042: PNP: PS/2 Controller [PNP0303:KBD,PNP0f03:MOU] at 0x60,0x64 irq 1,12 |
| [ 1.756119] serio: i8042 KBD port at 0x60,0x64 irq 1 |
| [ 1.761085] serio: i8042 AUX port at 0x60,0x64 irq 12 |
| [ 1.766363] mousedev: PS/2 mouse device common for all mice |
| [ 1.772026] rtc_cmos rtc_cmos: RTC can wake from S4 |
| [ 1.777060] rtc_cmos rtc_cmos: rtc core: registered rtc_cmos as rtc0 |
| [ 1.783440] rtc_cmos rtc_cmos: alarms up to one year, y3k, 114 bytes nvram, hpet irqs |
| [ 1.791331] ledtrig-cpu: registered to indicate activity on CPUs |
| [ 1.797433] AMD IOMMUv2 driver by Joerg Roedel <joerg.roedel@amd.com> |
| [ 1.803873] AMD IOMMUv2 functionality not available on this system |
| [ 1.810159] TCP: cubic registered |
| [ 1.813539] NET: Registered protocol family 10 |
| [ 1.818236] mip6: Mobile IPv6 |
| [ 1.821213] NET: Registered protocol family 17 |
| [ 1.825658] mpls_gso: MPLS GSO support |
| [ 1.829857] registered taskstats version 1 |
| [ 1.834573] rtc_cmos rtc_cmos: setting system clock to 2016-06-27 21:07:05 UTC (1467061625) |
| [ 1.843014] PM: Hibernation image not present or could not be loaded. |
| [ 1.844312] Freeing unused kernel memory: 1204K (ffffffff818ee000 - ffffffff81a1b000) |
| [ 1.852143] Write protecting the kernel read-only data: 8192k |
| [ 1.860287] Freeing unused kernel memory: 924K (ffff880001519000 - ffff880001600000) |
| [ 1.868572] Freeing unused kernel memory: 216K (ffff8800017ca000 - ffff880001800000) |
| [ 1.887476] systemd-udevd[72]: starting version 215 |
| [ 1.892740] random: systemd-udevd urandom read with 3 bits of entropy available |
| [ 1.910336] ACPI: bus type USB registered |
| [ 1.914433] pps_core: LinuxPPS API ver. 1 registered |
| [ 1.914439] usbcore: registered new interface driver usbfs |
| [ 1.914450] usbcore: registered new interface driver hub |
| [ 1.914516] usbcore: registered new device driver usb |
| [ 1.920185] SCSI subsystem initialized |
| [ 1.924858] FDC 0 is a post-1991 82077 |
| [ 1.942749] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it> |
| [ 1.952389] PTP clock support registered |
| [ 1.956406] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver |
| [ 1.963587] ehci-pci: EHCI PCI platform driver |
| [ 1.968113] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver |
| [ 1.968259] ehci-pci 0000:00:02.1: EHCI Host Controller |
| [ 1.968269] ehci-pci 0000:00:02.1: new USB bus registered, assigned bus number 1 |
| [ 1.968285] ehci-pci 0000:00:02.1: debug port 1 |
| [ 1.968325] ehci-pci 0000:00:02.1: cache line size of 64 is not supported |
| [ 1.968363] ehci-pci 0000:00:02.1: irq 22, io mem 0xfc503000 |
| [ 1.997354] tg3.c:v3.137 (May 11, 2014) |
| [ 2.000045] ehci-pci 0000:00:02.1: USB 2.0 started, EHCI 1.00 |
| [ 2.000095] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002 |
| [ 2.000096] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 |
| [ 2.000098] usb usb1: Product: EHCI Host Controller |
| [ 2.000099] usb usb1: Manufacturer: Linux 3.16.0-4-amd64 ehci_hcd |
| [ 2.000100] usb usb1: SerialNumber: 0000:00:02.1 |
| [ 2.000241] hub 1-0:1.0: USB hub found |
| [ 2.000248] hub 1-0:1.0: 10 ports detected |
| [ 2.044355] tg3 0000:02:00.0: enabling device (0004 -> 0006) |
| [ 2.050162] ohci-pci: OHCI PCI platform driver |
| [ 2.050337] ACPI: PCI Interrupt Link [LNIB] enabled at IRQ 17 |
| [ 2.060475] ohci-pci 0000:00:02.0: OHCI PCI host controller |
| [ 2.066051] ohci-pci 0000:00:02.0: new USB bus registered, assigned bus number 2 |
| [ 2.073495] ohci-pci 0000:00:02.0: irq 23, io mem 0xfc500000 |
| [ 2.073621] e1000e: Intel(R) PRO/1000 Network Driver - 2.3.2-k |
| [ 2.073623] e1000e: Copyright(c) 1999 - 2014 Intel Corporation. |
| [ 2.073908] ACPI: PCI Interrupt Link [LNND] enabled at IRQ 19 |
| [ 2.074047] e1000e 0000:07:00.0: Interrupt Throttling Rate (ints/sec) set to dynamic conservative mode |
| [ 2.074081] e1000e 0000:07:00.0: irq 40 for MSI/MSI-X |
| [ 2.107502] libata version 3.00 loaded. |
| [ 2.121982] tg3 0000:02:00.0 eth0: Tigon3 [partno(BCM95721) rev 4201] (PCI Express) MAC address 00:23:54:37:d4:d3 |
| [ 2.132233] tg3 0000:02:00.0 eth0: attached PHY is 5750 (10/100/1000Base-T Ethernet) (WireSpeed[1], EEE[0]) |
| [ 2.141978] tg3 0000:02:00.0 eth0: RXcsums[1] LinkChgREG[0] MIirq[0] ASF[0] TSOcap[1] |
| [ 2.149799] tg3 0000:02:00.0 eth0: dma_rwctrl[76180000] dma_mask[64-bit] |
| [ 2.156792] tg3 0000:03:00.0: enabling device (0004 -> 0006) |
| [ 2.162124] usb usb2: New USB device found, idVendor=1d6b, idProduct=0001 |
| [ 2.162126] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1 |
| [ 2.162128] usb usb2: Product: OHCI PCI host controller |
| [ 2.162129] usb usb2: Manufacturer: Linux 3.16.0-4-amd64 ohci_hcd |
| [ 2.162130] usb usb2: SerialNumber: 0000:00:02.0 |
| [ 2.162299] hub 2-0:1.0: USB hub found |
| [ 2.162309] hub 2-0:1.0: 10 ports detected |
| [ 2.162630] sata_nv 0000:00:07.0: version 3.5 |
| [ 2.162787] ACPI: PCI Interrupt Link [LSA0] enabled at IRQ 21 |
| [ 2.163164] scsi0 : sata_nv |
| [ 2.208914] scsi1 : sata_nv |
| [ 2.208922] ACPI: PCI Interrupt Link [LNIA] enabled at IRQ 16 |
| [ 2.217504] ata1: SATA max UDMA/133 cmd 0x5050 ctl 0x5070 bmdma 0x5030 irq 21 |
| [ 2.224636] ata2: SATA max UDMA/133 cmd 0x5058 ctl 0x5074 bmdma 0x5038 irq 21 |
| [ 2.231892] ACPI: PCI Interrupt Link [LSA1] enabled at IRQ 20 |
| [ 2.237961] scsi2 : sata_nv |
| [ 2.240872] scsi3 : sata_nv |
| [ 2.243722] ata3: SATA max UDMA/133 cmd 0x5060 ctl 0x5078 bmdma 0x5040 irq 20 |
| [ 2.245711] e1000e 0000:07:00.0 eth1: (PCI Express:2.5GT/s:Width x4) 00:15:17:4e:46:c9 |
| [ 2.245712] e1000e 0000:07:00.0 eth1: Intel(R) PRO/1000 Network Connection |
| [ 2.245786] e1000e 0000:07:00.0 eth1: MAC: 0, PHY: 4, PBA No: D72468-003 |
| [ 2.245896] ACPI: PCI Interrupt Link [LNIC] enabled at IRQ 18 |
| [ 2.245985] e1000e 0000:07:00.1: Interrupt Throttling Rate (ints/sec) set to dynamic conservative mode |
| [ 2.246012] e1000e 0000:07:00.1: irq 41 for MSI/MSI-X |
| [ 2.287342] ata4: SATA max UDMA/133 cmd 0x5068 ctl 0x507c bmdma 0x5048 irq 20 |
| [ 2.294508] pata_amd 0000:00:06.0: version 0.4.1 |
| [ 2.294961] scsi4 : pata_amd |
| [ 2.297964] scsi5 : pata_amd |
| [ 2.300907] ata5: PATA max UDMA/133 cmd 0x1f0 ctl 0x3f6 bmdma 0x5020 irq 14 |
| [ 2.303615] tg3 0000:03:00.0 eth2: Tigon3 [partno(BCM95721) rev 4201] (PCI Express) MAC address 00:23:54:37:d5:e9 |
| [ 2.303617] tg3 0000:03:00.0 eth2: attached PHY is 5750 (10/100/1000Base-T Ethernet) (WireSpeed[1], EEE[0]) |
| [ 2.303619] tg3 0000:03:00.0 eth2: RXcsums[1] LinkChgREG[0] MIirq[0] ASF[0] TSOcap[1] |
| [ 2.303620] tg3 0000:03:00.0 eth2: dma_rwctrl[76180000] dma_mask[64-bit] |
| [ 2.342348] ata6: PATA max UDMA/133 cmd 0x170 ctl 0x376 bmdma 0x5028 irq 15 |
| [ 2.420792] e1000e 0000:07:00.1 eth3: (PCI Express:2.5GT/s:Width x4) 00:15:17:4e:46:c8 |
| [ 2.428704] e1000e 0000:07:00.1 eth3: Intel(R) PRO/1000 Network Connection |
| [ 2.435650] e1000e 0000:07:00.1 eth3: MAC: 0, PHY: 4, PBA No: D72468-003 |
| [ 2.442504] e1000e 0000:08:00.0: Interrupt Throttling Rate (ints/sec) set to dynamic conservative mode |
| [ 2.451820] e1000e 0000:08:00.0: irq 42 for MSI/MSI-X |
| [ 2.540015] ata1: SATA link down (SStatus 0 SControl 300) |
| [ 2.604014] ata3: SATA link down (SStatus 0 SControl 300) |
| [ 2.624715] e1000e 0000:08:00.0 eth4: (PCI Express:2.5GT/s:Width x4) 00:15:17:4e:46:cb |
| [ 2.632628] e1000e 0000:08:00.0 eth4: Intel(R) PRO/1000 Network Connection |
| [ 2.639576] e1000e 0000:08:00.0 eth4: MAC: 0, PHY: 4, PBA No: D72468-003 |
| [ 2.646349] e1000e 0000:08:00.1: Interrupt Throttling Rate (ints/sec) set to dynamic conservative mode |
| [ 2.655659] e1000e 0000:08:00.1: irq 43 for MSI/MSI-X |
| [ 2.828763] e1000e 0000:08:00.1 eth5: (PCI Express:2.5GT/s:Width x4) 00:15:17:4e:46:ca |
| [ 2.836676] e1000e 0000:08:00.1 eth5: Intel(R) PRO/1000 Network Connection |
| [ 2.843625] e1000e 0000:08:00.1 eth5: MAC: 0, PHY: 4, PBA No: D72468-003 |
| [ 2.856017] ata2: SATA link down (SStatus 0 SControl 300) |
| [ 3.172013] ata4: SATA link down (SStatus 0 SControl 300) |
| [ 3.352617] FS-Cache: Loaded |
| [ 3.358769] RPC: Registered named UNIX socket transport module. |
| [ 3.365923] RPC: Registered udp transport module. |
| [ 3.371996] RPC: Registered tcp transport module. |
| [ 3.378082] RPC: Registered tcp NFSv4.1 backchannel transport module. |
| [ 3.389779] FS-Cache: Netfs 'nfs' registered for caching |
| [ 3.400797] tg3 0000:02:00.0: irq 44 for MSI/MSI-X |
| [ 3.448078] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready |
| [ 6.637746] tg3 0000:02:00.0 eth0: Link is up at 1000 Mbps, full duplex |
| [ 6.640982] tg3 0000:02:00.0 eth0: Flow control is on for TX and on for RX |
| [ 6.640982] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready |
| [ 7.565475] systemd[1]: systemd 215 running in system mode. (+PAM +AUDIT +SELINUX +IMA +SYSVINIT +LIBCRYPTSETUP +GCRYPT +ACL +XZ -SECCOMP -APPARMOR) |
| [ 7.578961] systemd[1]: Detected architecture 'x86-64'. |
| [ 7.623818] systemd[1]: Inserted module 'autofs4' |
| [ 7.629970] systemd[1]: Set hostname to <cb-test-tgt>. |
| [ 7.763072] systemd[1]: Cannot add dependency job for unit dbus.socket, ignoring: Unit dbus.socket failed to load: No such file or directory. |
| [ 7.775823] systemd[1]: Cannot add dependency job for unit display-manager.service, ignoring: Unit display-manager.service failed to load: No such file or directory. |
| [ 7.791069] systemd[1]: Starting Forward Password Requests to Wall Directory Watch. |
| [ 7.798801] systemd[1]: Started Forward Password Requests to Wall Directory Watch. |
| [ 7.806387] systemd[1]: Expecting device dev-ttyS0.device... |
| [ 7.820131] systemd[1]: Starting Remote File Systems (Pre). |
| [ 7.836048] systemd[1]: Reached target Remote File Systems (Pre). |
| [ 7.842206] systemd[1]: Starting Arbitrary Executable File Formats File System Automount Point. |
| [ 7.864074] systemd[1]: Set up automount Arbitrary Executable File Formats File System Automount Point. |
| [ 7.873487] systemd[1]: Starting Dispatch Password Requests to Console Directory Watch. |
| [ 7.881518] systemd[1]: Started Dispatch Password Requests to Console Directory Watch. |
| [ 7.889438] systemd[1]: Starting Paths. |
| [ 7.904059] systemd[1]: Reached target Paths. |
| [ 7.908439] systemd[1]: Starting Encrypted Volumes. |
| [ 7.924044] systemd[1]: Reached target Encrypted Volumes. |
| [ 7.929454] systemd[1]: Starting Swap. |
| [ 7.940059] systemd[1]: Reached target Swap. |
| [ 7.944347] systemd[1]: Starting Root Slice. |
| [ 7.956056] systemd[1]: Created slice Root Slice. |
| [ 7.960780] systemd[1]: Starting User and Session Slice. |
| [ 7.976052] systemd[1]: Created slice User and Session Slice. |
| [ 7.981811] systemd[1]: Starting Delayed Shutdown Socket. |
| [ 7.996060] systemd[1]: Listening on Delayed Shutdown Socket. |
| [ 8.001818] systemd[1]: Starting /dev/initctl Compatibility Named Pipe. |
| [ 8.020045] systemd[1]: Listening on /dev/initctl Compatibility Named Pipe. |
| [ 8.027012] systemd[1]: Starting Journal Socket (/dev/log). |
| [ 8.044058] systemd[1]: Listening on Journal Socket (/dev/log). |
| [ 8.050000] systemd[1]: Starting udev Kernel Socket. |
| [ 8.064065] systemd[1]: Listening on udev Kernel Socket. |
| [ 8.069399] systemd[1]: Starting udev Control Socket. |
| [ 8.084042] systemd[1]: Listening on udev Control Socket. |
| [ 8.089452] systemd[1]: Starting Journal Socket. |
| [ 8.104042] systemd[1]: Listening on Journal Socket. |
| [ 8.109035] systemd[1]: Starting System Slice. |
| [ 8.124044] systemd[1]: Created slice System Slice. |
| [ 8.128936] systemd[1]: Starting system-getty.slice. |
| [ 8.144057] systemd[1]: Created slice system-getty.slice. |
| [ 8.149469] systemd[1]: Starting system-serial\x2dgetty.slice. |
| [ 8.164045] systemd[1]: Created slice system-serial\x2dgetty.slice. |
| [ 8.170335] systemd[1]: Starting Increase datagram queue length... |
| [ 8.188638] systemd[1]: Mounting Huge Pages File System... |
| [ 8.204489] systemd[1]: Starting udev Coldplug all Devices... |
| [ 8.226597] systemd[1]: Starting Load Kernel Modules... |
| [ 8.240595] systemd[1]: Mounting POSIX Message Queue File System... |
| [ 8.258502] systemd[1]: Started Set Up Additional Binary Formats. |
| [ 8.264687] systemd[1]: Mounting Debug File System... |
| [ 8.281088] systemd[1]: Starting Create list of required static device nodes for the current kernel... |
| [ 8.304596] systemd[1]: Starting Slices. |
| [ 8.316049] systemd[1]: Reached target Slices. |
| [ 8.320515] systemd[1]: Starting Remount Root and Kernel File Systems... |
| [ 8.344052] systemd[1]: Mounted Debug File System. |
| [ 8.360047] systemd[1]: Mounted POSIX Message Queue File System. |
| [ 8.376083] systemd[1]: Mounted Huge Pages File System. |
| [ 8.392054] systemd[1]: Started Increase datagram queue length. |
| [ 8.408069] systemd[1]: Started Load Kernel Modules. |
| [ 8.428061] systemd[1]: Started Create list of required static device nodes for the current kernel. |
| [ 8.448111] systemd[1]: Started Remount Root and Kernel File Systems. |
| [ 8.464048] systemd[1]: Started udev Coldplug all Devices. |
| [ 8.494747] systemd[1]: Started Various fixups to make systemd work better on Debian. |
| [ 8.502602] systemd[1]: Starting Load/Save Random Seed... |
| [ 8.516759] systemd[1]: Starting Create Static Device Nodes in /dev... |
| [ 8.532526] systemd[1]: Mounted Configuration File System. |
| [ 8.538036] systemd[1]: Starting Apply Kernel Variables... |
| [ 8.552460] systemd[1]: Mounted FUSE Control File System. |
| [ 8.557874] systemd[1]: Starting Syslog Socket. |
| [ 8.572049] systemd[1]: Listening on Syslog Socket. |
| [ 8.576943] systemd[1]: Starting Sockets. |
| [ 8.588090] systemd[1]: Reached target Sockets. |
| [ 8.592664] systemd[1]: Starting Journal Service... |
| [ 8.616074] systemd[1]: Started Journal Service. |
| [ 8.685036] systemd-udevd[177]: starting version 215 |
| [ 8.775979] systemd-journald[176]: Received request to flush runtime journal from PID 1 |
| [ 8.815119] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input2 |
| [ 8.824926] ACPI: Power Button [PWRB] |
| [ 8.830438] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input3 |
| [ 8.838917] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4 |
| [ 8.839125] ACPI: Power Button [PWRF] |
| [ 8.854482] i2c i2c-0: nForce2 SMBus adapter at 0x4c80 |
| [ 8.859668] i2c i2c-1: nForce2 SMBus adapter at 0x4cc0 |
| [ 8.865841] EDAC MC: Ver: 3.0.0 |
| [ 8.876075] k8temp 0000:00:18.3: Temperature readouts might be wrong - check erratum #141 |
| [ 8.884542] input: PC Speaker as /devices/platform/pcspkr/input/input5 |
| [ 8.886280] k8temp 0000:00:19.3: Temperature readouts might be wrong - check erratum #141 |
| [ 8.900042] systemd-udevd[191]: renamed network interface eth1 to eth6 |
| [ 8.912173] MCE: In-kernel MCE decoding enabled. |
| [ 8.929313] AMD64 EDAC driver v3.4.0 |
| [ 8.934096] EDAC amd64: DRAM ECC enabled. |
| [ 8.938673] EDAC amd64: K8 revF or later detected (node 0). |
| [ 8.944307] EDAC MC: DCT0 chip selects: |
| [ 8.944309] EDAC amd64: MC: 0: 0MB 1: 0MB |
| [ 8.949089] EDAC amd64: MC: 2: 0MB 3: 0MB |
| [ 8.953804] EDAC amd64: MC: 4: 1024MB 5: 1024MB |
| [ 8.958577] EDAC amd64: MC: 6: 1024MB 7: 1024MB |
| [ 8.963605] EDAC amd64: CS4: Registered DDR2 RAM |
| [ 8.968251] EDAC amd64: CS5: Registered DDR2 RAM |
| [ 8.972871] EDAC amd64: CS6: Registered DDR2 RAM |
| [ 8.977488] EDAC amd64: CS7: Registered DDR2 RAM |
| [ 8.982442] EDAC MC0: Giving out device to module amd64_edac controller K8: DEV 0000:00:18.2 (INTERRUPT) |
| [ 8.982910] kvm: Nested Virtualization enabled |
| [ 8.996391] EDAC amd64: DRAM ECC disabled. |
| [ 9.000499] EDAC amd64: ECC disabled in the BIOS or no ECC capability, module will not load. |
| Either enable ECC checking or force module loading by setting 'ecc_enable_override'. |
| (Note that use of the override may cause unknown side effects.) |
| [ 9.024838] EDAC PCI0: Giving out device to module amd64_edac controller EDAC PCI controller: DEV 0000:00:18.2 (POLLED) |
| [ 9.037454] powernow_k8: fid 0x16 (3000 MHz), vid 0xa |
| [ 9.043699] powernow_k8: fid 0x14 (2800 MHz), vid 0xc |
| [ 9.049699] powernow_k8: fid 0x12 (2600 MHz), vid 0xe |
| [ 9.054749] powernow_k8: fid 0x10 (2400 MHz), vid 0x10 |
| [ 9.059889] powernow_k8: fid 0xe (2200 MHz), vid 0x12 |
| [ 9.064942] powernow_k8: fid 0xc (2000 MHz), vid 0x12 |
| [ 9.069917] powernow_k8: fid 0x2 (1000 MHz), vid 0x12 |
| [ 9.075038] powernow_k8: fid 0x16 (3000 MHz), vid 0xa |
| [ 9.080090] powernow_k8: fid 0x14 (2800 MHz), vid 0xc |
| [ 9.085143] powernow_k8: fid 0x12 (2600 MHz), vid 0xe |
| [ 9.090195] powernow_k8: fid 0x10 (2400 MHz), vid 0x10 |
| [ 9.095335] powernow_k8: fid 0xe (2200 MHz), vid 0x12 |
| [ 9.100387] powernow_k8: fid 0xc (2000 MHz), vid 0x12 |
| [ 9.105441] powernow_k8: fid 0x2 (1000 MHz), vid 0x12 |
| [ 9.110117] random: nonblocking pool is initialized |
| [ 9.117146] powernow_k8: Found 1 Dual-Core AMD Opteron(tm) Processor 8222 (4 cpu cores) (version 2.20.00) |
| [ 9.468938] Installing knfsd (copyright (C) 1996 okir@monad.swb.de). |
| [ 39.648363] *****RAPTOR ENGINEERING AUTOMATED TEST BOOT SUCCESS***** |