| [ 0.000000] Initializing cgroup subsys cpuset |
| [ 0.000000] Initializing cgroup subsys cpu |
| [ 0.000000] Initializing cgroup subsys cpuacct |
| [ 0.000000] Linux version 3.16.0-4-amd64 (debian-kernel@lists.debian.org) (gcc version 4.8.4 (Debian 4.8.4-1) ) #1 SMP Debian 3.16.7-ckt9-2 (2015-04-13) |
| [ 0.000000] Command line: root=/dev/nfs initrd=initrd-cb-test-tgt-x86_64 rootfstype=nfs nfsroot=10.100.1.100:/nfsroots/cb-test-tgt-03,v3,hard,nointr,tcp ip=10.100.1.12::10.100.1.1:255.255.255.0:embed-o-matic:eth0:off console=ttyS0,115200n8 consoleblank=0 rw BOOT_IMAGE=vmlinuz-cb-test-tgt-x86_64 |
| [ 0.000000] e820: BIOS-provided physical RAM map: |
| [ 0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009fbff] usable |
| [ 0.000000] BIOS-e820: [mem 0x000000000009fc00-0x000000000009ffff] reserved |
| [ 0.000000] BIOS-e820: [mem 0x00000000000f0000-0x00000000000fffff] reserved |
| [ 0.000000] BIOS-e820: [mem 0x0000000000100000-0x00000000bff9efff] usable |
| [ 0.000000] BIOS-e820: [mem 0x00000000bff9f000-0x00000000bfffffff] reserved |
| [ 0.000000] BIOS-e820: [mem 0x0000000100000000-0x000000013fffffff] usable |
| [ 0.000000] NX (Execute Disable) protection: active |
| [ 0.000000] SMBIOS 2.7 present. |
| [ 0.000000] DMI: ASUS KFSN4-DRE/KFSN4-DRE, BIOS RAPTOR-NORMAL 04/06/2016 |
| [ 0.000000] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved |
| [ 0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable |
| [ 0.000000] AGP: No AGP bridge found |
| [ 0.000000] e820: last_pfn = 0x140000 max_arch_pfn = 0x400000000 |
| [ 0.000000] MTRR default type: uncachable |
| [ 0.000000] MTRR fixed ranges enabled: |
| [ 0.000000] 00000-9FFFF write-back |
| [ 0.000000] A0000-BFFFF uncachable |
| [ 0.000000] C0000-FFFFF write-back |
| [ 0.000000] MTRR variable ranges enabled: |
| [ 0.000000] 0 base 0000000000 mask FF80000000 write-back |
| [ 0.000000] 1 base 0080000000 mask FFC0000000 write-back |
| [ 0.000000] 2 base 00F8000000 mask FFFC000000 write-combining |
| [ 0.000000] 3 disabled |
| [ 0.000000] 4 disabled |
| [ 0.000000] 5 disabled |
| [ 0.000000] 6 disabled |
| [ 0.000000] 7 disabled |
| [ 0.000000] TOM2: 0000000140000000 aka 5120M |
| [ 0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106 |
| [ 0.000000] e820: last_pfn = 0xbff9f max_arch_pfn = 0x400000000 |
| [ 0.000000] found SMP MP-table at [mem 0x000f0790-0x000f079f] mapped at [ffff8800000f0790] |
| [ 0.000000] Base memory trampoline at [ffff880000099000] 99000 size 24576 |
| [ 0.000000] init_memory_mapping: [mem 0x00000000-0x000fffff] |
| [ 0.000000] [mem 0x00000000-0x000fffff] page 4k |
| [ 0.000000] BRK [0x01af4000, 0x01af4fff] PGTABLE |
| [ 0.000000] BRK [0x01af5000, 0x01af5fff] PGTABLE |
| [ 0.000000] BRK [0x01af6000, 0x01af6fff] PGTABLE |
| [ 0.000000] init_memory_mapping: [mem 0x13fe00000-0x13fffffff] |
| [ 0.000000] [mem 0x13fe00000-0x13fffffff] page 2M |
| [ 0.000000] BRK [0x01af7000, 0x01af7fff] PGTABLE |
| [ 0.000000] init_memory_mapping: [mem 0x13c000000-0x13fdfffff] |
| [ 0.000000] [mem 0x13c000000-0x13fdfffff] page 2M |
| [ 0.000000] init_memory_mapping: [mem 0x100000000-0x13bffffff] |
| [ 0.000000] [mem 0x100000000-0x13bffffff] page 2M |
| [ 0.000000] init_memory_mapping: [mem 0x00100000-0xbff9efff] |
| [ 0.000000] [mem 0x00100000-0x001fffff] page 4k |
| [ 0.000000] [mem 0x00200000-0xbfdfffff] page 2M |
| [ 0.000000] [mem 0xbfe00000-0xbff9efff] page 4k |
| [ 0.000000] RAMDISK: [mem 0x7f24c000-0x7fffefff] |
| [ 0.000000] ACPI: Early table checksum verification disabled |
| [ 0.000000] ACPI: RSDP 0x00000000000F0930 000024 (v02 CORE ) |
| [ 0.000000] ACPI: XSDT 0x00000000BFFB80E0 00006C (v01 CORE COREBOOT 00000000 CORE 00000000) |
| [ 0.000000] ACPI: FACP 0x00000000BFFBA8D0 000074 (v01 CORE COREBOOT 00000000 CORE 00000000) |
| [ 0.000000] ACPI: DSDT 0x00000000BFFB8280 002648 (v02 ASUS COREBOOT 00000001 INTL 20150619) |
| [ 0.000000] ACPI: FACS 0x00000000BFFB8240 000040 |
| [ 0.000000] ACPI: SSDT 0x00000000BFFBA9D0 0006BD (v02 CORE COREBOOT 0000002A CORE 0000002A) |
| [ 0.000000] ACPI: TCPA 0x00000000BFFBB090 000032 (v02 CORE COREBOOT 00000000 CORE 00000000) |
| [ 0.000000] ACPI: APIC 0x00000000BFFBB0D0 00008E (v01 CORE COREBOOT 00000000 CORE 00000000) |
| [ 0.000000] ACPI: SRAT 0x00000000BFFBB160 0000E8 (v01 CORE COREBOOT 00000000 CORE 00000000) |
| [ 0.000000] ACPI: SLIT 0x00000000BFFBB250 000030 (v01 CORE COREBOOT 00000000 CORE 00000000) |
| [ 0.000000] ACPI: HPET 0x00000000BFFBB280 000038 (v01 CORE COREBOOT 00000000 CORE 00000000) |
| [ 0.000000] ACPI: SRAT 0x00000000BFFBB2C0 0000E8 (v01 CORE COREBOOT 00000000 CORE 00000000) |
| [ 0.000000] ACPI: SLIT 0x00000000BFFBB3B0 000030 (v01 CORE COREBOOT 00000000 CORE 00000000) |
| [ 0.000000] ACPI: Local APIC address 0xfee00000 |
| [ 0.000000] SRAT: PXM 0 -> APIC 0x10 -> Node 0 |
| [ 0.000000] SRAT: PXM 0 -> APIC 0x11 -> Node 0 |
| [ 0.000000] SRAT: PXM 1 -> APIC 0x12 -> Node 1 |
| [ 0.000000] SRAT: PXM 1 -> APIC 0x13 -> Node 1 |
| [ 0.000000] SRAT: Node 0 PXM 0 [mem 0x00000000-0x0009ffff] |
| [ 0.000000] SRAT: Node 0 PXM 0 [mem 0x00100000-0xbfffffff] |
| [ 0.000000] SRAT: Node 0 PXM 0 [mem 0x100000000-0x13fffffff] |
| [ 0.000000] NUMA: Initialized distance table, cnt=2 |
| [ 0.000000] NUMA: Node 0 [mem 0x00000000-0x0009ffff] + [mem 0x00100000-0xbfffffff] -> [mem 0x00000000-0xbfffffff] |
| [ 0.000000] NUMA: Node 0 [mem 0x00000000-0xbfffffff] + [mem 0x100000000-0x13fffffff] -> [mem 0x00000000-0x13fffffff] |
| [ 0.000000] Initmem setup node 0 [mem 0x00000000-0x13fffffff] |
| [ 0.000000] NODE_DATA [mem 0x13fff7000-0x13fffbfff] |
| [ 0.000000] [ffffea0000000000-ffffea00045fffff] PMD -> [ffff88013b600000-ffff88013edfffff] on node 0 |
| [ 0.000000] Zone ranges: |
| [ 0.000000] DMA [mem 0x00001000-0x00ffffff] |
| [ 0.000000] DMA32 [mem 0x01000000-0xffffffff] |
| [ 0.000000] Normal [mem 0x100000000-0x13fffffff] |
| [ 0.000000] Movable zone start for each node |
| [ 0.000000] Early memory node ranges |
| [ 0.000000] node 0: [mem 0x00001000-0x0009efff] |
| [ 0.000000] node 0: [mem 0x00100000-0xbff9efff] |
| [ 0.000000] node 0: [mem 0x100000000-0x13fffffff] |
| [ 0.000000] On node 0 totalpages: 1048381 |
| [ 0.000000] DMA zone: 56 pages used for memmap |
| [ 0.000000] DMA zone: 21 pages reserved |
| [ 0.000000] DMA zone: 3998 pages, LIFO batch:0 |
| [ 0.000000] DMA32 zone: 10695 pages used for memmap |
| [ 0.000000] DMA32 zone: 782239 pages, LIFO batch:31 |
| [ 0.000000] Normal zone: 3584 pages used for memmap |
| [ 0.000000] Normal zone: 262144 pages, LIFO batch:31 |
| [ 0.000000] Detected use of extended apic ids on hypertransport bus |
| [ 0.000000] Detected use of extended apic ids on hypertransport bus |
| [ 0.000000] ACPI: PM-Timer IO Port: 0x4008 |
| [ 0.000000] ACPI: Local APIC address 0xfee00000 |
| [ 0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x10] enabled) |
| [ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x11] enabled) |
| [ 0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x12] enabled) |
| [ 0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x13] enabled) |
| [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1]) |
| [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1]) |
| [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x02] high edge lint[0x1]) |
| [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x03] high edge lint[0x1]) |
| [ 0.000000] ACPI: IOAPIC (id[0x08] address[0xfec00000] gsi_base[0]) |
| [ 0.000000] IOAPIC[0]: apic_id 8, version 17, address 0xfec00000, GSI 0-23 |
| [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level) |
| [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 14 global_irq 14 high edge) |
| [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 15 global_irq 15 high edge) |
| [ 0.000000] ACPI: IRQ9 used by override. |
| [ 0.000000] ACPI: IRQ14 used by override. |
| [ 0.000000] ACPI: IRQ15 used by override. |
| [ 0.000000] Using ACPI (MADT) for SMP configuration information |
| [ 0.000000] ACPI: HPET id: 0x10de8201 base: 0xfed00000 |
| [ 0.000000] smpboot: Allowing 4 CPUs, 0 hotplug CPUs |
| [ 0.000000] nr_irqs_gsi: 40 |
| [ 0.000000] PM: Registered nosave memory: [mem 0x0009f000-0x0009ffff] |
| [ 0.000000] PM: Registered nosave memory: [mem 0x000a0000-0x000effff] |
| [ 0.000000] PM: Registered nosave memory: [mem 0x000f0000-0x000fffff] |
| [ 0.000000] PM: Registered nosave memory: [mem 0xbff9f000-0xbfffffff] |
| [ 0.000000] PM: Registered nosave memory: [mem 0xc0000000-0xffffffff] |
| [ 0.000000] e820: [mem 0xc0000000-0xffffffff] available for PCI devices |
| [ 0.000000] Booting paravirtualized kernel on bare hardware |
| [ 0.000000] setup_percpu: NR_CPUS:512 nr_cpumask_bits:512 nr_cpu_ids:4 nr_node_ids:2 |
| [ 0.000000] PERCPU: Embedded 27 pages/cpu @ffff88013fc00000 s80896 r8192 d21504 u524288 |
| [ 0.000000] pcpu-alloc: s80896 r8192 d21504 u524288 alloc=1*2097152 |
| [ 0.000000] pcpu-alloc: [0] 0 1 2 3 |
| [ 0.000000] Built 1 zonelists in Node order, mobility grouping on. Total pages: 1034025 |
| [ 0.000000] Policy zone: Normal |
| [ 0.000000] Kernel command line: root=/dev/nfs initrd=initrd-cb-test-tgt-x86_64 rootfstype=nfs nfsroot=10.100.1.100:/nfsroots/cb-test-tgt-03,v3,hard,nointr,tcp ip=10.100.1.12::10.100.1.1:255.255.255.0:embed-o-matic:eth0:off console=ttyS0,115200n8 consoleblank=0 rw BOOT_IMAGE=vmlinuz-cb-test-tgt-x86_64 |
| [ 0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes) |
| [ 0.000000] AGP: Checking aperture... |
| [ 0.000000] AGP: No AGP bridge found |
| [ 0.000000] AGP: Node 0: aperture [bus addr 0xeb80000000-0xeb81ffffff] (32MB) |
| [ 0.000000] Aperture beyond 4GB. Ignoring. |
| [ 0.000000] AGP: Your BIOS doesn't leave a aperture memory hole |
| [ 0.000000] AGP: Please enable the IOMMU option in the BIOS setup |
| [ 0.000000] AGP: This costs you 64MB of RAM |
| [ 0.000000] AGP: Mapping aperture over RAM [mem 0xb4000000-0xb7ffffff] (65536KB) |
| [ 0.000000] PM: Registered nosave memory: [mem 0xb4000000-0xb7ffffff] |
| [ 0.000000] Memory: 3978532K/4193524K available (5207K kernel code, 946K rwdata, 1832K rodata, 1204K init, 840K bss, 214992K reserved) |
| [ 0.000000] Hierarchical RCU implementation. |
| [ 0.000000] RCU dyntick-idle grace-period acceleration is enabled. |
| [ 0.000000] RCU restricting CPUs from NR_CPUS=512 to nr_cpu_ids=4. |
| [ 0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=4 |
| [ 0.000000] NR_IRQS:33024 nr_irqs:712 16 |
| [ 0.000000] spurious 8259A interrupt: IRQ7. |
| [ 0.000000] Console: colour VGA+ 80x25 |
| [ 0.000000] console [ttyS0] enabled |
| [ 0.000000] mempolicy: Disabling automatic NUMA balancing. Configure with numa_balancing= or the kernel.numa_balancing sysctl |
| [ 0.000000] hpet clockevent registered |
| [ 0.000000] tsc: Fast TSC calibration using PIT |
| [ 0.000000] tsc: Detected 3015.543 MHz processor |
| [ 0.000000] tsc: Marking TSC unstable due to TSCs unsynchronized |
| [ 0.016000] Calibrating delay loop (skipped), value calculated using timer frequency.. 6031.08 BogoMIPS (lpj=12062172) |
| [ 0.020002] pid_max: default: 32768 minimum: 301 |
| [ 0.024012] ACPI: Core revision 20140424 |
| [ 0.029664] ACPI: All ACPI Tables successfully acquired |
| [ 0.035462] Security Framework initialized |
| [ 0.036013] AppArmor: AppArmor disabled by boot time parameter |
| [ 0.040001] Yama: disabled by default; enable with sysctl kernel.yama.* |
| [ 0.044324] Dentry cache hash table entries: 524288 (order: 10, 4194304 bytes) |
| [ 0.054220] Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes) |
| [ 0.057133] Mount-cache hash table entries: 8192 (order: 4, 65536 bytes) |
| [ 0.060012] Mountpoint-cache hash table entries: 8192 (order: 4, 65536 bytes) |
| [ 0.064358] Initializing cgroup subsys memory |
| [ 0.068010] Initializing cgroup subsys devices |
| [ 0.072010] Initializing cgroup subsys freezer |
| [ 0.076004] Initializing cgroup subsys net_cls |
| [ 0.080007] Initializing cgroup subsys blkio |
| [ 0.084005] Initializing cgroup subsys perf_event |
| [ 0.088002] Initializing cgroup subsys net_prio |
| [ 0.092029] tseg: 0000000000 |
| [ 0.092036] CPU: Physical Processor ID: 0 |
| [ 0.096001] CPU: Processor Core ID: 0 |
| [ 0.100002] mce: CPU supports 5 MCE banks |
| [ 0.104008] LVT offset 0 assigned for vector 0xf9 |
| [ 0.108003] process: using AMD E400 aware idle routine |
| [ 0.112003] Last level iTLB entries: 4KB 512, 2MB 8, 4MB 4 |
| Last level dTLB entries: 4KB 512, 2MB 8, 4MB 4, 1GB 0 |
| tlb_flushall_shift: 6 |
| [ 0.116080] Freeing SMP alternatives memory: 20K (ffffffff81a1b000 - ffffffff81a20000) |
| [ 0.120697] ftrace: allocating 21614 entries in 85 pages |
| [ 0.132432] ..TIMER: vector=0x30 apic1=0 pin1=0 apic2=0 pin2=0 |
| [ 0.178839] smpboot: CPU0: Dual-Core AMD Opteron(tm) Processor 8222 (fam: 0f, model: 41, stepping: 03) |
| [ 0.192000] Performance Events: AMD PMU driver. |
| [ 0.192002] ... version: 0 |
| [ 0.196000] ... bit width: 48 |
| [ 0.200000] ... generic registers: 4 |
| [ 0.204000] ... value mask: 0000ffffffffffff |
| [ 0.208000] ... max period: 00007fffffffffff |
| [ 0.212000] ... fixed-purpose events: 0 |
| [ 0.216000] ... event mask: 000000000000000f |
| [ 0.221515] NMI watchdog: enabled on all CPUs, permanently consumes one hw-PMU counter. |
| [ 0.224157] x86: Booting SMP configuration: |
| [ 0.228002] .... node #0, CPUs: #1 #2 #3 |
| [ 0.500065] x86: Booted up 1 node, 4 CPUs |
| [ 0.504002] smpboot: Total of 4 processors activated (24123.97 BogoMIPS) |
| [ 0.512105] devtmpfs: initialized |
| [ 0.521250] pinctrl core: initialized pinctrl subsystem |
| [ 0.524096] NET: Registered protocol family 16 |
| [ 0.528143] cpuidle: using governor ladder |
| [ 0.532002] cpuidle: using governor menu |
| [ 0.536005] node 0 link 1: io port [1000, 5fff] |
| [ 0.536008] TOM: 00000000c0000000 aka 3072M |
| [ 0.540002] node 0 link 1: mmio [a0000, bffff] |
| [ 0.540004] node 0 link 1: mmio [fc000000, fc5fffff] |
| [ 0.540006] node 0 link 1: mmio [f8000000, fbffffff] |
| [ 0.540007] TOM2: 0000000140000000 aka 5120M |
| [ 0.544002] bus: [bus 00-08] on node 0 link 1 |
| [ 0.544003] bus: 00 [io 0x0000-0xffff] |
| [ 0.544004] bus: 00 [mem 0x000a0000-0x000bffff] |
| [ 0.544006] bus: 00 [mem 0xc0000000-0xffffffff] |
| [ 0.544007] bus: 00 [mem 0x140000000-0xfcffffffff] |
| [ 0.544061] ACPI: bus type PCI registered |
| [ 0.548002] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5 |
| [ 0.552095] PCI: Using configuration type 1 for base access |
| [ 0.572087] ACPI: Added _OSI(Module Device) |
| [ 0.576002] ACPI: Added _OSI(Processor Device) |
| [ 0.580001] ACPI: Added _OSI(3.0 _SCP Extensions) |
| [ 0.584001] ACPI: Added _OSI(Processor Aggregator Device) |
| [ 0.593125] ACPI: Interpreter enabled |
| [ 0.596009] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S2_] (20140424/hwxface-580) |
| [ 0.604001] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S3_] (20140424/hwxface-580) |
| [ 0.614188] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S4_] (20140424/hwxface-580) |
| [ 0.624004] ACPI: (supports S0 S1 S5) |
| [ 0.628001] ACPI: Using IOAPIC for interrupt routing |
| [ 0.632030] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug |
| [ 0.641583] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-08]) |
| [ 0.644006] acpi PNP0A03:00: _OSC: OS supports [ASPM ClockPM Segments MSI] |
| [ 0.648011] acpi PNP0A03:00: _OSC: not requesting OS control; OS requires [ExtendedConfig ASPM ClockPM MSI] |
| [ 0.653647] acpi PNP0A03:00: host bridge window expanded to [io 0x0000-0x0cf7]; [io 0x03b0-0x03df] ignored |
| [ 0.656005] acpi PNP0A03:00: fail to add MMCONFIG information, can't access extended PCI configuration space under this bridge. |
| [ 0.660115] PCI host bridge to bus 0000:00 |
| [ 0.664002] pci_bus 0000:00: root bus resource [bus 00-08] |
| [ 0.668002] pci_bus 0000:00: root bus resource [io 0x0d00-0x5fff] |
| [ 0.672001] pci_bus 0000:00: root bus resource [mem 0xf8000000-0xfbffffff] |
| [ 0.676002] pci_bus 0000:00: root bus resource [mem 0xfc000000-0xfc5fffff] |
| [ 0.680001] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff] |
| [ 0.684001] pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7] |
| [ 0.688010] pci 0000:00:00.0: [10de:005e] type 00 class 0x058000 |
| [ 0.688124] pci 0000:00:01.0: [10de:0051] type 00 class 0x060100 |
| [ 0.688129] pci 0000:00:01.0: reg 0x10: [io 0x4c00-0x4c7f] |
| [ 0.688202] pci 0000:00:01.1: [10de:0052] type 00 class 0x0c0500 |
| [ 0.688208] pci 0000:00:01.1: reg 0x10: [io 0x5000-0x501f] |
| [ 0.688217] pci 0000:00:01.1: reg 0x20: [io 0x4c80-0x4cbf] |
| [ 0.688221] pci 0000:00:01.1: reg 0x24: [io 0x4cc0-0x4cff] |
| [ 0.688232] pci 0000:00:01.1: PME# supported from D3hot D3cold |
| [ 0.688298] pci 0000:00:02.0: [10de:005a] type 00 class 0x0c0310 |
| [ 0.688304] pci 0000:00:02.0: reg 0x10: [mem 0xfc500000-0xfc500fff] |
| [ 0.688324] pci 0000:00:02.0: supports D1 D2 |
| [ 0.688325] pci 0000:00:02.0: PME# supported from D0 D1 D2 D3hot D3cold |
| [ 0.688355] pci 0000:00:02.0: System wakeup disabled by ACPI |
| [ 0.692041] pci 0000:00:02.1: [10de:005b] type 00 class 0x0c0320 |
| [ 0.692048] pci 0000:00:02.1: reg 0x10: [mem 0xfc503000-0xfc5030ff] |
| [ 0.692073] pci 0000:00:02.1: supports D1 D2 |
| [ 0.692074] pci 0000:00:02.1: PME# supported from D0 D1 D2 D3hot D3cold |
| [ 0.696015] pci 0000:00:02.1: System wakeup disabled by ACPI |
| [ 0.700049] pci 0000:00:06.0: [10de:0053] type 00 class 0x01018a |
| [ 0.700062] pci 0000:00:06.0: reg 0x20: [io 0x5020-0x502f] |
| [ 0.700068] pci 0000:00:06.0: legacy IDE quirk: reg 0x10: [io 0x01f0-0x01f7] |
| [ 0.704001] pci 0000:00:06.0: legacy IDE quirk: reg 0x14: [io 0x03f6] |
| [ 0.708001] pci 0000:00:06.0: legacy IDE quirk: reg 0x18: [io 0x0170-0x0177] |
| [ 0.712001] pci 0000:00:06.0: legacy IDE quirk: reg 0x1c: [io 0x0376] |
| [ 0.716064] pci 0000:00:07.0: [10de:0054] type 00 class 0x010185 |
| [ 0.716069] pci 0000:00:07.0: reg 0x10: [io 0x5050-0x5057] |
| [ 0.716073] pci 0000:00:07.0: reg 0x14: [io 0x5070-0x5073] |
| [ 0.716076] pci 0000:00:07.0: reg 0x18: [io 0x5058-0x505f] |
| [ 0.716080] pci 0000:00:07.0: reg 0x1c: [io 0x5074-0x5077] |
| [ 0.716083] pci 0000:00:07.0: reg 0x20: [io 0x5030-0x503f] |
| [ 0.716087] pci 0000:00:07.0: reg 0x24: [mem 0xfc501000-0xfc501fff] |
| [ 0.716151] pci 0000:00:08.0: [10de:0055] type 00 class 0x010185 |
| [ 0.716157] pci 0000:00:08.0: reg 0x10: [io 0x5060-0x5067] |
| [ 0.716160] pci 0000:00:08.0: reg 0x14: [io 0x5078-0x507b] |
| [ 0.716164] pci 0000:00:08.0: reg 0x18: [io 0x5068-0x506f] |
| [ 0.716167] pci 0000:00:08.0: reg 0x1c: [io 0x507c-0x507f] |
| [ 0.716171] pci 0000:00:08.0: reg 0x20: [io 0x5040-0x504f] |
| [ 0.716174] pci 0000:00:08.0: reg 0x24: [mem 0xfc502000-0xfc502fff] |
| [ 0.716238] pci 0000:00:09.0: [10de:005c] type 01 class 0x060400 |
| [ 0.716278] pci 0000:00:09.0: System wakeup disabled by ACPI |
| [ 0.720042] pci 0000:00:0b.0: [10de:005d] type 01 class 0x060400 |
| [ 0.720062] pci 0000:00:0b.0: PME# supported from D0 D1 D2 D3hot D3cold |
| [ 0.720092] pci 0000:00:0b.0: System wakeup disabled by ACPI |
| [ 0.724042] pci 0000:00:0c.0: [10de:005d] type 01 class 0x060400 |
| [ 0.724062] pci 0000:00:0c.0: PME# supported from D0 D1 D2 D3hot D3cold |
| [ 0.724092] pci 0000:00:0c.0: System wakeup disabled by ACPI |
| [ 0.728042] pci 0000:00:0d.0: [10de:005d] type 01 class 0x060400 |
| [ 0.728060] pci 0000:00:0d.0: PME# supported from D0 D1 D2 D3hot D3cold |
| [ 0.728090] pci 0000:00:0d.0: System wakeup disabled by ACPI |
| [ 0.732042] pci 0000:00:0e.0: [10de:005d] type 01 class 0x060400 |
| [ 0.732061] pci 0000:00:0e.0: PME# supported from D0 D1 D2 D3hot D3cold |
| [ 0.732091] pci 0000:00:0e.0: System wakeup disabled by ACPI |
| [ 0.736047] pci 0000:00:18.0: [1022:1100] type 00 class 0x060000 |
| [ 0.736115] pci 0000:00:18.1: [1022:1101] type 00 class 0x060000 |
| [ 0.736176] pci 0000:00:18.2: [1022:1102] type 00 class 0x060000 |
| [ 0.736237] pci 0000:00:18.3: [1022:1103] type 00 class 0x060000 |
| [ 0.736301] pci 0000:00:19.0: [1022:1100] type 00 class 0x060000 |
| [ 0.736368] pci 0000:00:19.1: [1022:1101] type 00 class 0x060000 |
| [ 0.736429] pci 0000:00:19.2: [1022:1102] type 00 class 0x060000 |
| [ 0.736490] pci 0000:00:19.3: [1022:1103] type 00 class 0x060000 |
| [ 0.736589] pci 0000:01:04.0: [18ca:0020] type 00 class 0x030000 |
| [ 0.736598] pci 0000:01:04.0: reg 0x10: [mem 0xf8000000-0xfbffffff pref] |
| [ 0.736604] pci 0000:01:04.0: reg 0x14: [mem 0xfc200000-0xfc23ffff] |
| [ 0.736609] pci 0000:01:04.0: reg 0x18: [io 0x3000-0x307f] |
| [ 0.736639] pci 0000:01:04.0: supports D1 D2 |
| [ 0.736693] pci 0000:00:09.0: PCI bridge to [bus 01] |
| [ 0.740002] pci 0000:00:09.0: bridge window [io 0x3000-0x3fff] |
| [ 0.740005] pci 0000:00:09.0: bridge window [mem 0xfc200000-0xfc2fffff] |
| [ 0.740007] pci 0000:00:09.0: bridge window [mem 0xf8000000-0xfbffffff pref] |
| [ 0.740058] pci 0000:02:00.0: [14e4:1659] type 00 class 0x020000 |
| [ 0.740070] pci 0000:02:00.0: reg 0x10: [mem 0xfc300000-0xfc30ffff 64bit] |
| [ 0.740093] pci 0000:02:00.0: reg 0x30: [mem 0x0d000000-0x0d00ffff pref] |
| [ 0.740133] pci 0000:02:00.0: PME# supported from D3hot D3cold |
| [ 0.740184] pci 0000:02:00.0: disabling ASPM on pre-1.1 PCIe device. You can enable it with 'pcie_aspm=force' |
| [ 0.744007] pci 0000:00:0b.0: PCI bridge to [bus 02] |
| [ 0.748003] pci 0000:00:0b.0: bridge window [mem 0xfc300000-0xfc3fffff] |
| [ 0.748054] pci 0000:03:00.0: [14e4:1659] type 00 class 0x020000 |
| [ 0.748066] pci 0000:03:00.0: reg 0x10: [mem 0xfc400000-0xfc40ffff 64bit] |
| [ 0.748127] pci 0000:03:00.0: PME# supported from D3hot D3cold |
| [ 0.748179] pci 0000:03:00.0: disabling ASPM on pre-1.1 PCIe device. You can enable it with 'pcie_aspm=force' |
| [ 0.752005] pci 0000:00:0c.0: PCI bridge to [bus 03] |
| [ 0.756003] pci 0000:00:0c.0: bridge window [mem 0xfc400000-0xfc4fffff] |
| [ 0.756042] pci 0000:00:0d.0: PCI bridge to [bus 04] |
| [ 0.760047] pci 0000:05:00.0: [111d:8018] type 01 class 0x060400 |
| [ 0.760088] pci 0000:05:00.0: PME# supported from D0 D3hot D3cold |
| [ 0.760135] pci 0000:05:00.0: disabling ASPM on pre-1.1 PCIe device. You can enable it with 'pcie_aspm=force' |
| [ 0.764004] pci 0000:00:0e.0: PCI bridge to [bus 05-08] |
| [ 0.768002] pci 0000:00:0e.0: bridge window [io 0x1000-0x2fff] |
| [ 0.768004] pci 0000:00:0e.0: bridge window [mem 0xfc000000-0xfc1fffff] |
| [ 0.768050] pci 0000:06:00.0: [111d:8018] type 01 class 0x060400 |
| [ 0.768098] pci 0000:06:00.0: PME# supported from D0 D3hot D3cold |
| [ 0.768146] pci 0000:06:00.0: disabling ASPM on pre-1.1 PCIe device. You can enable it with 'pcie_aspm=force' |
| [ 0.772008] pci 0000:06:01.0: [111d:8018] type 01 class 0x060400 |
| [ 0.772056] pci 0000:06:01.0: PME# supported from D0 D3hot D3cold |
| [ 0.772105] pci 0000:06:00.0: disabling ASPM on pre-1.1 PCIe device. You can enable it with 'pcie_aspm=force' |
| [ 0.776020] pci 0000:05:00.0: PCI bridge to [bus 06-08] |
| [ 0.780005] pci 0000:05:00.0: bridge window [io 0x1000-0x2fff] |
| [ 0.780009] pci 0000:05:00.0: bridge window [mem 0xfc000000-0xfc1fffff] |
| [ 0.780070] pci 0000:07:00.0: [8086:10bc] type 00 class 0x020000 |
| [ 0.780082] pci 0000:07:00.0: reg 0x10: [mem 0xfc000000-0xfc01ffff] |
| [ 0.780092] pci 0000:07:00.0: reg 0x14: [mem 0xfc020000-0xfc03ffff] |
| [ 0.780101] pci 0000:07:00.0: reg 0x18: [io 0x1000-0x101f] |
| [ 0.780133] pci 0000:07:00.0: reg 0x30: [mem 0xfc040000-0xfc05ffff pref] |
| [ 0.780174] pci 0000:07:00.0: PME# supported from D0 D3hot D3cold |
| [ 0.780237] pci 0000:07:00.1: [8086:10bc] type 00 class 0x020000 |
| [ 0.780250] pci 0000:07:00.1: reg 0x10: [mem 0xfc060000-0xfc07ffff] |
| [ 0.780259] pci 0000:07:00.1: reg 0x14: [mem 0xfc080000-0xfc09ffff] |
| [ 0.780268] pci 0000:07:00.1: reg 0x18: [io 0x1020-0x103f] |
| [ 0.780300] pci 0000:07:00.1: reg 0x30: [mem 0xfc0a0000-0xfc0bffff pref] |
| [ 0.784005] pci 0000:07:00.1: PME# supported from D0 D3hot D3cold |
| [ 0.784061] pci 0000:07:00.0: disabling ASPM on pre-1.1 PCIe device. You can enable it with 'pcie_aspm=force' |
| [ 0.788009] pci 0000:06:00.0: PCI bridge to [bus 07] |
| [ 0.792005] pci 0000:06:00.0: bridge window [io 0x1000-0x1fff] |
| [ 0.792009] pci 0000:06:00.0: bridge window [mem 0xfc000000-0xfc0fffff] |
| [ 0.792072] pci 0000:08:00.0: [8086:10bc] type 00 class 0x020000 |
| [ 0.792084] pci 0000:08:00.0: reg 0x10: [mem 0xfc100000-0xfc11ffff] |
| [ 0.792094] pci 0000:08:00.0: reg 0x14: [mem 0xfc120000-0xfc13ffff] |
| [ 0.792103] pci 0000:08:00.0: reg 0x18: [io 0x2000-0x201f] |
| [ 0.792135] pci 0000:08:00.0: reg 0x30: [mem 0xfc140000-0xfc15ffff pref] |
| [ 0.792176] pci 0000:08:00.0: PME# supported from D0 D3hot |
| [ 0.792239] pci 0000:08:00.1: [8086:10bc] type 00 class 0x020000 |
| [ 0.792251] pci 0000:08:00.1: reg 0x10: [mem 0xfc160000-0xfc17ffff] |
| [ 0.792260] pci 0000:08:00.1: reg 0x14: [mem 0xfc180000-0xfc19ffff] |
| [ 0.792270] pci 0000:08:00.1: reg 0x18: [io 0x2020-0x203f] |
| [ 0.792301] pci 0000:08:00.1: reg 0x30: [mem 0xfc1a0000-0xfc1bffff pref] |
| [ 0.792343] pci 0000:08:00.1: PME# supported from D0 D3hot |
| [ 0.792400] pci 0000:08:00.0: disabling ASPM on pre-1.1 PCIe device. You can enable it with 'pcie_aspm=force' |
| [ 0.796009] pci 0000:06:01.0: PCI bridge to [bus 08] |
| [ 0.800005] pci 0000:06:01.0: bridge window [io 0x2000-0x2fff] |
| [ 0.800009] pci 0000:06:01.0: bridge window [mem 0xfc100000-0xfc1fffff] |
| [ 0.800044] pci_bus 0000:00: on NUMA node 0 |
| [ 0.800102] ACPI: PCI Interrupt Link [LNKA] (IRQs *16 17 18 19) |
| [ 0.808345] ACPI: PCI Interrupt Link [LNKB] (IRQs 16 *17 18 19) |
| [ 0.813548] ACPI: PCI Interrupt Link [LNKC] (IRQs 16 17 18 19) *0, disabled. |
| [ 0.821600] ACPI: PCI Interrupt Link [LNKD] (IRQs 16 17 18 19) *0, disabled. |
| [ 0.828247] ACPI: PCI Interrupt Link [LNKE] (IRQs 16 17 18 19) *0, disabled. |
| [ 0.836247] ACPI: PCI Interrupt Link [LLAS] (IRQs 20 21 22 23) *0, disabled. |
| [ 0.842709] ACPI: PCI Interrupt Link [LUOH] (IRQs 20 21 22 *23) |
| [ 0.845545] ACPI: PCI Interrupt Link [LUEH] (IRQs 20 21 *22 23) |
| [ 0.849548] ACPI: PCI Interrupt Link [LAUD] (IRQs 20 21 22 23) *0, disabled. |
| [ 0.854709] ACPI: PCI Interrupt Link [LMOD] (IRQs 20 21 22 23) *0, disabled. |
| [ 0.861880] ACPI: PCI Interrupt Link [LPA0] (IRQs 20 21 22 23) *0, disabled. |
| [ 0.869216] ACPI: PCI Interrupt Link [LSA0] (IRQs 20 *21 22 23) |
| [ 0.873542] ACPI: PCI Interrupt Link [LSA1] (IRQs *20 21 22 23) |
| [ 0.881189] ACPI: PCI Interrupt Link [LEMA] (IRQs 20 21 22 23) *0, disabled. |
| [ 0.888246] ACPI: PCI Interrupt Link [LUB0] (IRQs 20 21 22 23) *0, disabled. |
| [ 0.894709] ACPI: PCI Interrupt Link [LUB2] (IRQs 20 21 22 23) *0, disabled. |
| [ 0.898711] ACPI: PCI Interrupt Link [LKSM] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled. |
| [ 0.907559] ACPI: PCI Interrupt Link [LNIA] (IRQs 16) *0, disabled. |
| [ 0.909877] ACPI: PCI Interrupt Link [LNIB] (IRQs 17) *0, disabled. |
| [ 0.916247] ACPI: PCI Interrupt Link [LNIC] (IRQs 18) *0, disabled. |
| [ 0.921875] ACPI: PCI Interrupt Link [LNND] (IRQs 19) *0, disabled. |
| [ 0.929377] ACPI: Enabled 1 GPEs in block 00 to 1F |
| [ 0.932095] vgaarb: setting as boot device: PCI:0000:01:04.0 |
| [ 0.936000] vgaarb: device added: PCI:0000:01:04.0,decodes=io+mem,owns=io+mem,locks=none |
| [ 0.948009] vgaarb: loaded |
| [ 0.950716] vgaarb: bridge control possible 0000:01:04.0 |
| [ 0.956117] PCI: Using ACPI for IRQ routing |
| [ 0.960004] PCI: pci_cache_line_size set to 64 bytes |
| [ 0.960065] e820: reserve RAM buffer [mem 0x0009fc00-0x0009ffff] |
| [ 0.960067] e820: reserve RAM buffer [mem 0xbff9f000-0xbfffffff] |
| [ 0.960259] HPET: 3 timers in total, 0 timers will be used for per-cpu timer |
| [ 0.964005] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 31 |
| [ 0.972555] hpet0: 3 comparators, 32-bit 25.000000 MHz counter |
| [ 0.980041] Switched to clocksource hpet |
| [ 0.992405] pnp: PnP ACPI init |
| [ 0.995482] ACPI: bus type PNP registered |
| [ 0.999875] pnp 00:00: Plug and Play ACPI device, IDs PNP0303 PNP030b (active) |
| [ 0.999928] pnp 00:01: Plug and Play ACPI device, IDs PNP0f03 PNP0f13 (active) |
| [ 0.999986] pnp 00:02: Plug and Play ACPI device, IDs PNP0501 (active) |
| [ 1.000046] pnp 00:03: Plug and Play ACPI device, IDs PNP0501 (active) |
| [ 1.000077] pnp 00:04: [dma 2] |
| [ 1.000104] pnp 00:04: Plug and Play ACPI device, IDs PNP0700 (active) |
| [ 1.000121] pnp: PnP ACPI: found 5 devices |
| [ 1.004221] ACPI: bus type PNP unregistered |
| [ 1.015754] pci 0000:02:00.0: can't claim BAR 6 [mem 0x0d000000-0x0d00ffff pref]: no compatible bridge window |
| [ 1.025712] pci 0000:00:09.0: PCI bridge to [bus 01] |
| [ 1.030681] pci 0000:00:09.0: bridge window [io 0x3000-0x3fff] |
| [ 1.036772] pci 0000:00:09.0: bridge window [mem 0xfc200000-0xfc2fffff] |
| [ 1.043557] pci 0000:00:09.0: bridge window [mem 0xf8000000-0xfbffffff pref] |
| [ 1.050784] pci 0000:02:00.0: BAR 6: assigned [mem 0xfc310000-0xfc31ffff pref] |
| [ 1.058000] pci 0000:00:0b.0: PCI bridge to [bus 02] |
| [ 1.062963] pci 0000:00:0b.0: bridge window [mem 0xfc300000-0xfc3fffff] |
| [ 1.069749] pci 0000:00:0c.0: PCI bridge to [bus 03] |
| [ 1.074715] pci 0000:00:0c.0: bridge window [mem 0xfc400000-0xfc4fffff] |
| [ 1.081502] pci 0000:00:0d.0: PCI bridge to [bus 04] |
| [ 1.086468] pci 0000:06:00.0: PCI bridge to [bus 07] |
| [ 1.091431] pci 0000:06:00.0: bridge window [io 0x1000-0x1fff] |
| [ 1.097520] pci 0000:06:00.0: bridge window [mem 0xfc000000-0xfc0fffff] |
| [ 1.104310] pci 0000:06:01.0: PCI bridge to [bus 08] |
| [ 1.109268] pci 0000:06:01.0: bridge window [io 0x2000-0x2fff] |
| [ 1.115363] pci 0000:06:01.0: bridge window [mem 0xfc100000-0xfc1fffff] |
| [ 1.122154] pci 0000:05:00.0: PCI bridge to [bus 06-08] |
| [ 1.127373] pci 0000:05:00.0: bridge window [io 0x1000-0x2fff] |
| [ 1.133468] pci 0000:05:00.0: bridge window [mem 0xfc000000-0xfc1fffff] |
| [ 1.140259] pci 0000:00:0e.0: PCI bridge to [bus 05-08] |
| [ 1.145476] pci 0000:00:0e.0: bridge window [io 0x1000-0x2fff] |
| [ 1.151561] pci 0000:00:0e.0: bridge window [mem 0xfc000000-0xfc1fffff] |
| [ 1.158350] pci_bus 0000:00: resource 4 [io 0x0d00-0x5fff] |
| [ 1.158352] pci_bus 0000:00: resource 5 [mem 0xf8000000-0xfbffffff] |
| [ 1.158354] pci_bus 0000:00: resource 6 [mem 0xfc000000-0xfc5fffff] |
| [ 1.158356] pci_bus 0000:00: resource 7 [mem 0x000a0000-0x000bffff] |
| [ 1.158358] pci_bus 0000:00: resource 8 [io 0x0000-0x0cf7] |
| [ 1.158360] pci_bus 0000:01: resource 0 [io 0x3000-0x3fff] |
| [ 1.158362] pci_bus 0000:01: resource 1 [mem 0xfc200000-0xfc2fffff] |
| [ 1.158364] pci_bus 0000:01: resource 2 [mem 0xf8000000-0xfbffffff pref] |
| [ 1.158366] pci_bus 0000:02: resource 1 [mem 0xfc300000-0xfc3fffff] |
| [ 1.158368] pci_bus 0000:03: resource 1 [mem 0xfc400000-0xfc4fffff] |
| [ 1.158370] pci_bus 0000:05: resource 0 [io 0x1000-0x2fff] |
| [ 1.158372] pci_bus 0000:05: resource 1 [mem 0xfc000000-0xfc1fffff] |
| [ 1.158374] pci_bus 0000:06: resource 0 [io 0x1000-0x2fff] |
| [ 1.158376] pci_bus 0000:06: resource 1 [mem 0xfc000000-0xfc1fffff] |
| [ 1.158378] pci_bus 0000:07: resource 0 [io 0x1000-0x1fff] |
| [ 1.158380] pci_bus 0000:07: resource 1 [mem 0xfc000000-0xfc0fffff] |
| [ 1.158383] pci_bus 0000:08: resource 0 [io 0x2000-0x2fff] |
| [ 1.158384] pci_bus 0000:08: resource 1 [mem 0xfc100000-0xfc1fffff] |
| [ 1.158460] NET: Registered protocol family 2 |
| [ 1.163144] TCP established hash table entries: 32768 (order: 6, 262144 bytes) |
| [ 1.170570] TCP bind hash table entries: 32768 (order: 7, 524288 bytes) |
| [ 1.177489] TCP: Hash tables configured (established 32768 bind 32768) |
| [ 1.184103] TCP: reno registered |
| [ 1.187334] UDP hash table entries: 2048 (order: 4, 65536 bytes) |
| [ 1.193389] UDP-Lite hash table entries: 2048 (order: 4, 65536 bytes) |
| [ 1.199995] NET: Registered protocol family 1 |
| [ 1.204639] ACPI: PCI Interrupt Link [LUB0] enabled at IRQ 23 |
| [ 1.210612] ACPI: PCI Interrupt Link [LUB2] enabled at IRQ 22 |
| [ 1.216453] pci 0000:00:00.0: Found enabled HT MSI Mapping |
| [ 1.221961] pci 0000:00:00.0: Found enabled HT MSI Mapping |
| [ 1.227449] pci 0000:00:0b.0: Found disabled HT MSI Mapping |
| [ 1.233024] pci 0000:00:00.0: Found enabled HT MSI Mapping |
| [ 1.238533] pci 0000:00:00.0: Found enabled HT MSI Mapping |
| [ 1.244021] pci 0000:00:0c.0: Found disabled HT MSI Mapping |
| [ 1.249594] pci 0000:00:00.0: Found enabled HT MSI Mapping |
| [ 1.255105] pci 0000:00:00.0: Found enabled HT MSI Mapping |
| [ 1.260591] pci 0000:00:0d.0: Found disabled HT MSI Mapping |
| [ 1.266165] pci 0000:00:00.0: Found enabled HT MSI Mapping |
| [ 1.271680] pci 0000:00:00.0: Found enabled HT MSI Mapping |
| [ 1.277162] pci 0000:00:0e.0: Found disabled HT MSI Mapping |
| [ 1.282736] pci 0000:00:00.0: Found enabled HT MSI Mapping |
| [ 1.288236] pci 0000:01:04.0: Video device with shadowed ROM |
| [ 1.288261] PCI: CLS 64 bytes, default 64 |
| [ 1.288341] Unpacking initramfs... |
| [ 1.561293] Freeing initrd memory: 14028K (ffff88007f24c000 - ffff88007ffff000) |
| [ 1.569031] PCI-DMA: Disabling AGP. |
| [ 1.572671] PCI-DMA: aperture base @ b4000000 size 65536 KB |
| [ 1.578241] PCI-DMA: using GART IOMMU. |
| [ 1.581995] PCI-DMA: Reserving 64MB of IOMMU area in the AGP aperture |
| [ 1.592202] platform rtc_cmos: registered platform RTC device (no PNP device found) |
| [ 1.600010] microcode: AMD CPU family 0xf not supported |
| [ 1.605712] futex hash table entries: 1024 (order: 4, 65536 bytes) |
| [ 1.611959] audit: initializing netlink subsys (disabled) |
| [ 1.617388] audit: type=2000 audit(1459940888.616:1): initialized |
| [ 1.623916] HugeTLB registered 2 MB page size, pre-allocated 0 pages |
| [ 1.630291] zbud: loaded |
| [ 1.633035] VFS: Disk quotas dquot_6.5.2 |
| [ 1.636977] Dquot-cache hash table entries: 512 (order 0, 4096 bytes) |
| [ 1.643487] msgmni has been set to 7926 |
| [ 1.647762] alg: No test for stdrng (krng) |
| [ 1.651908] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252) |
| [ 1.659374] io scheduler noop registered |
| [ 1.663296] io scheduler deadline registered |
| [ 1.667613] io scheduler cfq registered (default) |
| [ 1.672627] pci_hotplug: PCI Hot Plug PCI Core version: 0.5 |
| [ 1.678214] pciehp: PCI Express Hot Plug Controller Driver version: 0.4 |
| [ 1.684884] GHES: HEST is not enabled! |
| [ 1.688723] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled |
| [ 1.715262] 00:02: ttyS0 at I/O 0x3f8 (irq = 4, base_baud = 115200) is a 16550A |
| [ 1.742871] 00:03: ttyS1 at I/O 0x2f8 (irq = 3, base_baud = 115200) is a 16550A |
| [ 1.750612] Linux agpgart interface v0.103 |
| [ 1.754827] i8042: PNP: PS/2 Controller [PNP0303:KBD,PNP0f03:MOU] at 0x60,0x64 irq 1,12 |
| [ 1.764918] serio: i8042 KBD port at 0x60,0x64 irq 1 |
| [ 1.769892] serio: i8042 AUX port at 0x60,0x64 irq 12 |
| [ 1.775168] mousedev: PS/2 mouse device common for all mice |
| [ 1.780867] rtc_cmos rtc_cmos: RTC can wake from S4 |
| [ 1.785901] rtc_cmos rtc_cmos: rtc core: registered rtc_cmos as rtc0 |
| [ 1.792281] rtc_cmos rtc_cmos: alarms up to one year, y3k, 114 bytes nvram, hpet irqs |
| [ 1.800124] ledtrig-cpu: registered to indicate activity on CPUs |
| [ 1.806230] AMD IOMMUv2 driver by Joerg Roedel <joerg.roedel@amd.com> |
| [ 1.812668] AMD IOMMUv2 functionality not available on this system |
| [ 1.818953] TCP: cubic registered |
| [ 1.822340] NET: Registered protocol family 10 |
| [ 1.827087] mip6: Mobile IPv6 |
| [ 1.830063] NET: Registered protocol family 17 |
| [ 1.834508] mpls_gso: MPLS GSO support |
| [ 1.838693] registered taskstats version 1 |
| [ 1.843407] rtc_cmos rtc_cmos: setting system clock to 2016-04-06 11:08:10 UTC (1459940890) |
| [ 1.851815] PM: Hibernation image not present or could not be loaded. |
| [ 1.853090] Freeing unused kernel memory: 1204K (ffffffff818ee000 - ffffffff81a1b000) |
| [ 1.860920] Write protecting the kernel read-only data: 8192k |
| [ 1.869075] Freeing unused kernel memory: 924K (ffff880001519000 - ffff880001600000) |
| [ 1.877361] Freeing unused kernel memory: 216K (ffff8800017ca000 - ffff880001800000) |
| [ 1.896508] systemd-udevd[72]: starting version 215 |
| [ 1.901767] random: systemd-udevd urandom read with 3 bits of entropy available |
| [ 1.920618] pps_core: LinuxPPS API ver. 1 registered |
| [ 1.920864] ACPI: bus type USB registered |
| [ 1.920900] usbcore: registered new interface driver usbfs |
| [ 1.920910] usbcore: registered new interface driver hub |
| [ 1.920975] usbcore: registered new device driver usb |
| [ 1.945428] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it> |
| [ 1.954736] SCSI subsystem initialized |
| [ 1.958576] FDC 0 is a post-1991 82077 |
| [ 1.962431] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver |
| [ 1.969122] PTP clock support registered |
| [ 1.973599] ehci-pci: EHCI PCI platform driver |
| [ 1.978226] e1000e: Intel(R) PRO/1000 Network Driver - 2.3.2-k |
| [ 1.984067] e1000e: Copyright(c) 1999 - 2014 Intel Corporation. |
| [ 1.990149] ehci-pci 0000:00:02.1: EHCI Host Controller |
| [ 1.991094] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver |
| [ 1.996415] ACPI: PCI Interrupt Link [LNND] enabled at IRQ 19 |
| [ 1.996641] e1000e 0000:07:00.0: Interrupt Throttling Rate (ints/sec) set to dynamic conservative mode |
| [ 1.996667] e1000e 0000:07:00.0: irq 40 for MSI/MSI-X |
| [ 2.016595] ehci-pci 0000:00:02.1: new USB bus registered, assigned bus number 1 |
| [ 2.016819] libata version 3.00 loaded. |
| [ 2.024022] ehci-pci 0000:00:02.1: debug port 1 |
| [ 2.028588] ehci-pci 0000:00:02.1: cache line size of 64 is not supported |
| [ 2.028618] ehci-pci 0000:00:02.1: irq 22, io mem 0xfc503000 |
| [ 2.028830] tg3.c:v3.137 (May 11, 2014) |
| [ 2.028846] tg3 0000:02:00.0: enabling device (0004 -> 0006) |
| [ 2.029100] ACPI: PCI Interrupt Link [LNIB] enabled at IRQ 17 |
| [ 2.060024] ehci-pci 0000:00:02.1: USB 2.0 started, EHCI 1.00 |
| [ 2.065818] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002 |
| [ 2.072603] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 |
| [ 2.078509] tg3 0000:02:00.0 eth0: Tigon3 [partno(BCM95721) rev 4201] (PCI Express) MAC address 00:23:54:37:d4:d3 |
| [ 2.078511] tg3 0000:02:00.0 eth0: attached PHY is 5750 (10/100/1000Base-T Ethernet) (WireSpeed[1], EEE[0]) |
| [ 2.078512] tg3 0000:02:00.0 eth0: RXcsums[1] LinkChgREG[0] MIirq[0] ASF[0] TSOcap[1] |
| [ 2.078514] tg3 0000:02:00.0 eth0: dma_rwctrl[76180000] dma_mask[64-bit] |
| [ 2.078578] tg3 0000:03:00.0: enabling device (0004 -> 0006) |
| [ 2.078684] ACPI: PCI Interrupt Link [LNIA] enabled at IRQ 16 |
| [ 2.125697] usb usb1: Product: EHCI Host Controller |
| [ 2.130575] usb usb1: Manufacturer: Linux 3.16.0-4-amd64 ehci_hcd |
| [ 2.136666] usb usb1: SerialNumber: 0000:00:02.1 |
| [ 2.141509] hub 1-0:1.0: USB hub found |
| [ 2.145276] hub 1-0:1.0: 10 ports detected |
| [ 2.149650] sata_nv 0000:00:07.0: version 3.5 |
| [ 2.149866] ACPI: PCI Interrupt Link [LSA0] enabled at IRQ 21 |
| [ 2.155700] ohci-pci: OHCI PCI platform driver |
| [ 2.155998] scsi0 : sata_nv |
| [ 2.163082] scsi1 : sata_nv |
| [ 2.165944] ata1: SATA max UDMA/133 cmd 0x5050 ctl 0x5070 bmdma 0x5030 irq 21 |
| [ 2.173077] ata2: SATA max UDMA/133 cmd 0x5058 ctl 0x5074 bmdma 0x5038 irq 21 |
| [ 2.175688] tg3 0000:03:00.0 eth1: Tigon3 [partno(BCM95721) rev 4201] (PCI Express) MAC address 00:23:54:37:d5:e9 |
| [ 2.175691] tg3 0000:03:00.0 eth1: attached PHY is 5750 (10/100/1000Base-T Ethernet) (WireSpeed[1], EEE[0]) |
| [ 2.175692] tg3 0000:03:00.0 eth1: RXcsums[1] LinkChgREG[0] MIirq[0] ASF[0] TSOcap[1] |
| [ 2.175694] tg3 0000:03:00.0 eth1: dma_rwctrl[76180000] dma_mask[64-bit] |
| [ 2.180999] e1000e 0000:07:00.0 eth2: (PCI Express:2.5GT/s:Width x4) 00:15:17:4e:46:c9 |
| [ 2.181001] e1000e 0000:07:00.0 eth2: Intel(R) PRO/1000 Network Connection |
| [ 2.181075] e1000e 0000:07:00.0 eth2: MAC: 0, PHY: 4, PBA No: D72468-003 |
| [ 2.181236] ACPI: PCI Interrupt Link [LNIC] enabled at IRQ 18 |
| [ 2.181343] e1000e 0000:07:00.1: Interrupt Throttling Rate (ints/sec) set to dynamic conservative mode |
| [ 2.181371] e1000e 0000:07:00.1: irq 41 for MSI/MSI-X |
| [ 2.251317] ACPI: PCI Interrupt Link [LSA1] enabled at IRQ 20 |
| [ 2.257374] scsi2 : sata_nv |
| [ 2.260281] scsi3 : sata_nv |
| [ 2.263123] ata3: SATA max UDMA/133 cmd 0x5060 ctl 0x5078 bmdma 0x5040 irq 20 |
| [ 2.270247] ata4: SATA max UDMA/133 cmd 0x5068 ctl 0x507c bmdma 0x5048 irq 20 |
| [ 2.277407] pata_amd 0000:00:06.0: version 0.4.1 |
| [ 2.277898] scsi4 : pata_amd |
| [ 2.280953] scsi5 : pata_amd |
| [ 2.283887] ata5: PATA max UDMA/133 cmd 0x1f0 ctl 0x3f6 bmdma 0x5020 irq 14 |
| [ 2.290840] ata6: PATA max UDMA/133 cmd 0x170 ctl 0x376 bmdma 0x5028 irq 15 |
| [ 2.297953] ohci-pci 0000:00:02.0: OHCI PCI host controller |
| [ 2.303540] ohci-pci 0000:00:02.0: new USB bus registered, assigned bus number 2 |
| [ 2.310964] ohci-pci 0000:00:02.0: irq 23, io mem 0xfc500000 |
| [ 2.356787] e1000e 0000:07:00.1 eth3: (PCI Express:2.5GT/s:Width x4) 00:15:17:4e:46:c8 |
| [ 2.364698] e1000e 0000:07:00.1 eth3: Intel(R) PRO/1000 Network Connection |
| [ 2.371648] e1000e 0000:07:00.1 eth3: MAC: 0, PHY: 4, PBA No: D72468-003 |
| [ 2.378450] e1000e 0000:08:00.0: Interrupt Throttling Rate (ints/sec) set to dynamic conservative mode |
| [ 2.380404] usb usb2: New USB device found, idVendor=1d6b, idProduct=0001 |
| [ 2.380405] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1 |
| [ 2.380406] usb usb2: Product: OHCI PCI host controller |
| [ 2.380408] usb usb2: Manufacturer: Linux 3.16.0-4-amd64 ohci_hcd |
| [ 2.380409] usb usb2: SerialNumber: 0000:00:02.0 |
| [ 2.380559] hub 2-0:1.0: USB hub found |
| [ 2.380568] hub 2-0:1.0: 10 ports detected |
| [ 2.425517] e1000e 0000:08:00.0: irq 42 for MSI/MSI-X |
| [ 2.560015] ata1: SATA link down (SStatus 0 SControl 300) |
| [ 2.588016] ata3: SATA link down (SStatus 0 SControl 300) |
| [ 2.600756] e1000e 0000:08:00.0 eth4: (PCI Express:2.5GT/s:Width x4) 00:15:17:4e:46:cb |
| [ 2.608674] e1000e 0000:08:00.0 eth4: Intel(R) PRO/1000 Network Connection |
| [ 2.615622] e1000e 0000:08:00.0 eth4: MAC: 0, PHY: 4, PBA No: D72468-003 |
| [ 2.622434] e1000e 0000:08:00.1: Interrupt Throttling Rate (ints/sec) set to dynamic conservative mode |
| [ 2.631752] e1000e 0000:08:00.1: irq 43 for MSI/MSI-X |
| [ 2.804823] e1000e 0000:08:00.1 eth5: (PCI Express:2.5GT/s:Width x4) 00:15:17:4e:46:ca |
| [ 2.812742] e1000e 0000:08:00.1 eth5: Intel(R) PRO/1000 Network Connection |
| [ 2.819688] e1000e 0000:08:00.1 eth5: MAC: 0, PHY: 4, PBA No: D72468-003 |
| [ 2.876013] ata2: SATA link down (SStatus 0 SControl 300) |
| [ 3.192012] ata4: SATA link down (SStatus 0 SControl 300) |
| [ 3.372261] FS-Cache: Loaded |
| [ 3.378393] RPC: Registered named UNIX socket transport module. |
| [ 3.385527] RPC: Registered udp transport module. |
| [ 3.391601] RPC: Registered tcp transport module. |
| [ 3.397695] RPC: Registered tcp NFSv4.1 backchannel transport module. |
| [ 3.409135] FS-Cache: Netfs 'nfs' registered for caching |
| [ 3.420811] tg3 0000:02:00.0: irq 44 for MSI/MSI-X |
| [ 3.468077] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready |
| [ 5.147886] tg3 0000:02:00.0 eth0: Link is up at 100 Mbps, full duplex |
| [ 5.151118] tg3 0000:02:00.0 eth0: Flow control is on for TX and on for RX |
| [ 5.151118] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready |
| [ 5.955569] systemd[1]: systemd 215 running in system mode. (+PAM +AUDIT +SELINUX +IMA +SYSVINIT +LIBCRYPTSETUP +GCRYPT +ACL +XZ -SECCOMP -APPARMOR) |
| [ 5.969066] systemd[1]: Detected architecture 'x86-64'. |
| [ 6.190954] systemd[1]: Inserted module 'autofs4' |
| [ 6.196495] systemd[1]: Set hostname to <cb-test-tgt>. |
| [ 6.273836] random: nonblocking pool is initialized |
| [ 6.452466] systemd[1]: Cannot add dependency job for unit dbus.socket, ignoring: Unit dbus.socket failed to load: No such file or directory. |
| [ 6.465204] systemd[1]: Cannot add dependency job for unit display-manager.service, ignoring: Unit display-manager.service failed to load: No such file or directory. |
| [ 6.480440] systemd[1]: Starting Forward Password Requests to Wall Directory Watch. |
| [ 6.488171] systemd[1]: Started Forward Password Requests to Wall Directory Watch. |
| [ 6.495743] systemd[1]: Expecting device dev-ttyS0.device... |
| [ 6.512143] systemd[1]: Starting Remote File Systems (Pre). |
| [ 6.528052] systemd[1]: Reached target Remote File Systems (Pre). |
| [ 6.534212] systemd[1]: Starting Arbitrary Executable File Formats File System Automount Point. |
| [ 6.556076] systemd[1]: Set up automount Arbitrary Executable File Formats File System Automount Point. |
| [ 6.565486] systemd[1]: Starting Dispatch Password Requests to Console Directory Watch. |
| [ 6.573518] systemd[1]: Started Dispatch Password Requests to Console Directory Watch. |
| [ 6.581438] systemd[1]: Starting Paths. |
| [ 6.596058] systemd[1]: Reached target Paths. |
| [ 6.600440] systemd[1]: Starting Encrypted Volumes. |
| [ 6.616062] systemd[1]: Reached target Encrypted Volumes. |
| [ 6.621474] systemd[1]: Starting Swap. |
| [ 6.636042] systemd[1]: Reached target Swap. |
| [ 6.640322] systemd[1]: Starting Root Slice. |
| [ 6.652060] systemd[1]: Created slice Root Slice. |
| [ 6.656785] systemd[1]: Starting User and Session Slice. |
| [ 6.672049] systemd[1]: Created slice User and Session Slice. |
| [ 6.677805] systemd[1]: Starting Delayed Shutdown Socket. |
| [ 6.692059] systemd[1]: Listening on Delayed Shutdown Socket. |
| [ 6.697822] systemd[1]: Starting /dev/initctl Compatibility Named Pipe. |
| [ 6.716046] systemd[1]: Listening on /dev/initctl Compatibility Named Pipe. |
| [ 6.723010] systemd[1]: Starting Journal Socket (/dev/log). |
| [ 6.740059] systemd[1]: Listening on Journal Socket (/dev/log). |
| [ 6.745995] systemd[1]: Starting udev Kernel Socket. |
| [ 6.760052] systemd[1]: Listening on udev Kernel Socket. |
| [ 6.765380] systemd[1]: Starting udev Control Socket. |
| [ 6.780051] systemd[1]: Listening on udev Control Socket. |
| [ 6.785471] systemd[1]: Starting Journal Socket. |
| [ 6.800057] systemd[1]: Listening on Journal Socket. |
| [ 6.805064] systemd[1]: Starting System Slice. |
| [ 6.820058] systemd[1]: Created slice System Slice. |
| [ 6.824959] systemd[1]: Starting system-getty.slice. |
| [ 6.840057] systemd[1]: Created slice system-getty.slice. |
| [ 6.845464] systemd[1]: Starting system-serial\x2dgetty.slice. |
| [ 6.860059] systemd[1]: Created slice system-serial\x2dgetty.slice. |
| [ 6.866356] systemd[1]: Starting Increase datagram queue length... |
| [ 6.884667] systemd[1]: Mounting Huge Pages File System... |
| [ 6.900690] systemd[1]: Starting udev Coldplug all Devices... |
| [ 7.147994] systemd[1]: Starting Load Kernel Modules... |
| [ 7.164585] systemd[1]: Mounting POSIX Message Queue File System... |
| [ 7.184721] systemd[1]: Started Set Up Additional Binary Formats. |
| [ 7.190986] systemd[1]: Mounting Debug File System... |
| [ 7.204988] systemd[1]: Starting Create list of required static device nodes for the current kernel... |
| [ 7.228777] systemd[1]: Starting Slices. |
| [ 7.240066] systemd[1]: Reached target Slices. |
| [ 7.244538] systemd[1]: Starting Remount Root and Kernel File Systems... |
| [ 7.272102] systemd[1]: Mounted Debug File System. |
| [ 7.288107] systemd[1]: Mounted POSIX Message Queue File System. |
| [ 7.304063] systemd[1]: Mounted Huge Pages File System. |
| [ 7.320050] systemd[1]: Started Increase datagram queue length. |
| [ 7.336081] systemd[1]: Started Load Kernel Modules. |
| [ 7.356115] systemd[1]: Started Create list of required static device nodes for the current kernel. |
| [ 7.376055] systemd[1]: Started Remount Root and Kernel File Systems. |
| [ 7.392069] systemd[1]: Started udev Coldplug all Devices. |
| [ 7.423179] systemd[1]: Started Various fixups to make systemd work better on Debian. |
| [ 7.431038] systemd[1]: Starting Load/Save Random Seed... |
| [ 7.444896] systemd[1]: Starting Create Static Device Nodes in /dev... |
| [ 7.460660] systemd[1]: Mounted Configuration File System. |
| [ 7.466184] systemd[1]: Starting Apply Kernel Variables... |
| [ 7.480615] systemd[1]: Mounted FUSE Control File System. |
| [ 7.486045] systemd[1]: Starting Syslog Socket. |
| [ 7.500090] systemd[1]: Listening on Syslog Socket. |
| [ 7.505003] systemd[1]: Starting Sockets. |
| [ 7.516043] systemd[1]: Reached target Sockets. |
| [ 7.520593] systemd[1]: Starting Journal Service... |
| [ 7.544056] systemd[1]: Started Journal Service. |
| [ 7.678099] systemd-udevd[174]: starting version 215 |
| [ 7.937779] systemd-journald[172]: Received request to flush runtime journal from PID 1 |
| [ 8.428498] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input2 |
| [ 8.437052] ACPI: Power Button [PWRB] |
| [ 8.440911] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input3 |
| [ 8.448334] ACPI: Power Button [PWRF] |
| [ 8.459665] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4 |
| [ 8.466543] k8temp 0000:00:18.3: Temperature readouts might be wrong - check erratum #141 |
| [ 8.476194] k8temp 0000:00:19.3: Temperature readouts might be wrong - check erratum #141 |
| [ 8.486751] EDAC MC: Ver: 3.0.0 |
| [ 8.486825] input: PC Speaker as /devices/platform/pcspkr/input/input4 |
| [ 8.499549] i2c i2c-0: nForce2 SMBus adapter at 0x4c80 |
| [ 8.505234] i2c i2c-1: nForce2 SMBus adapter at 0x4cc0 |
| [ 8.516167] systemd-udevd[195]: renamed network interface eth1 to rename3 |
| [ 8.523409] MCE: In-kernel MCE decoding enabled. |
| [ 8.540172] systemd-udevd[210]: renamed network interface eth2 to eth6 |
| [ 8.591559] systemd-udevd[195]: renamed network interface eth1 to eth2 |
| [ 8.600846] AMD64 EDAC driver v3.4.0 |
| [ 8.604513] EDAC amd64: DRAM ECC enabled. |
| [ 8.608643] EDAC amd64: K8 revF or later detected (node 0). |
| [ 8.614403] EDAC MC: DCT0 chip selects: |
| [ 8.614405] EDAC amd64: MC: 0: 0MB 1: 0MB |
| [ 8.619113] EDAC amd64: MC: 2: 0MB 3: 0MB |
| [ 8.623857] EDAC amd64: MC: 4: 1024MB 5: 1024MB |
| [ 8.628571] EDAC amd64: MC: 6: 1024MB 7: 1024MB |
| [ 8.634754] kvm: Nested Virtualization enabled |
| [ 8.635705] EDAC amd64: CS4: Registered DDR2 RAM |
| [ 8.635706] EDAC amd64: CS5: Registered DDR2 RAM |
| [ 8.635707] EDAC amd64: CS6: Registered DDR2 RAM |
| [ 8.635707] EDAC amd64: CS7: Registered DDR2 RAM |
| [ 8.636106] EDAC MC0: Giving out device to module amd64_edac controller K8: DEV 0000:00:18.2 (INTERRUPT) |
| [ 8.636300] EDAC amd64: DRAM ECC disabled. |
| [ 8.671200] EDAC amd64: ECC disabled in the BIOS or no ECC capability, module will not load. |
| Either enable ECC checking or force module loading by setting 'ecc_enable_override'. |
| (Note that use of the override may cause unknown side effects.) |
| [ 8.696065] EDAC PCI0: Giving out device to module amd64_edac controller EDAC PCI controller: DEV 0000:00:18.2 (POLLED) |
| [ 8.707660] powernow_k8: fid 0x16 (3000 MHz), vid 0xa |
| [ 8.712735] powernow_k8: fid 0x14 (2800 MHz), vid 0xc |
| [ 8.717798] powernow_k8: fid 0x12 (2600 MHz), vid 0xe |
| [ 8.722854] powernow_k8: fid 0x10 (2400 MHz), vid 0x10 |
| [ 8.727994] powernow_k8: fid 0xe (2200 MHz), vid 0x12 |
| [ 8.733052] powernow_k8: fid 0xc (2000 MHz), vid 0x12 |
| [ 8.738107] powernow_k8: fid 0x2 (1000 MHz), vid 0x12 |
| [ 8.743297] powernow_k8: fid 0x16 (3000 MHz), vid 0xa |
| [ 8.748370] powernow_k8: fid 0x14 (2800 MHz), vid 0xc |
| [ 8.753419] powernow_k8: fid 0x12 (2600 MHz), vid 0xe |
| [ 8.758471] powernow_k8: fid 0x10 (2400 MHz), vid 0x10 |
| [ 8.763608] powernow_k8: fid 0xe (2200 MHz), vid 0x12 |
| [ 8.768662] powernow_k8: fid 0xc (2000 MHz), vid 0x12 |
| [ 8.773715] powernow_k8: fid 0x2 (1000 MHz), vid 0x12 |
| [ 8.780540] powernow_k8: Found 1 Dual-Core AMD Opteron(tm) Processor 8222 (4 cpu cores) (version 2.20.00) |
| [ 11.196076] Installing knfsd (copyright (C) 1996 okir@monad.swb.de). |
| [ 41.929347] *****RAPTOR ENGINEERING AUTOMATED TEST BOOT SUCCESS***** |