| [ 0.000000] Initializing cgroup subsys cpuset |
| [ 0.000000] Initializing cgroup subsys cpu |
| [ 0.000000] Initializing cgroup subsys cpuacct |
| [ 0.000000] Linux version 3.16.0-4-amd64 (debian-kernel@lists.debian.org) (gcc version 4.8.4 (Debian 4.8.4-1) ) #1 SMP Debian 3.16.7-ckt7-1 (2015-03-01) |
| [ 0.000000] Command line: root=/dev/nfs initrd=initrd-cb-test-tgt rootfstype=nfs nfsroot=10.100.1.1:/nfsroots/cb-test-tgt-01,v3,hard,nointr,tcp ip=10.100.1.10::10.100.1.1:255.255.255.0:embed-o-matic:eth0:off console=tty0 console=ttyS0,115200n8 rw BOOT_IMAGE=vmlinuz-cb-test-tgt |
| [ 0.000000] e820: BIOS-provided physical RAM map: |
| [ 0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009fbff] usable |
| [ 0.000000] BIOS-e820: [mem 0x000000000009fc00-0x000000000009ffff] reserved |
| [ 0.000000] BIOS-e820: [mem 0x00000000000f0000-0x00000000000fffff] reserved |
| [ 0.000000] BIOS-e820: [mem 0x0000000000100000-0x00000000bff9afff] usable |
| [ 0.000000] BIOS-e820: [mem 0x00000000bff9b000-0x00000000cfffffff] reserved |
| [ 0.000000] BIOS-e820: [mem 0x0000000100000000-0x000000017fffffff] usable |
| [ 0.000000] NX (Execute Disable) protection: active |
| [ 0.000000] SMBIOS 2.7 present. |
| [ 0.000000] DMI: ASUS KFSN4-DRE/KFSN4-DRE, BIOS 4.0-9975-g1f38d79-dirty 06/11/2015 |
| [ 0.000000] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved |
| [ 0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable |
| [ 0.000000] AGP: No AGP bridge found |
| [ 0.000000] e820: last_pfn = 0x180000 max_arch_pfn = 0x400000000 |
| [ 0.000000] MTRR default type: uncachable |
| [ 0.000000] MTRR fixed ranges enabled: |
| [ 0.000000] 00000-9FFFF write-back |
| [ 0.000000] A0000-BFFFF uncachable |
| [ 0.000000] C0000-FFFFF write-back |
| [ 0.000000] MTRR variable ranges enabled: |
| [ 0.000000] 0 base 000000000000 mask FFFF80000000 write-back |
| [ 0.000000] 1 base 000080000000 mask FFFFC0000000 write-back |
| [ 0.000000] 2 base 0000F8000000 mask FFFFFC000000 write-combining |
| [ 0.000000] 3 disabled |
| [ 0.000000] 4 disabled |
| [ 0.000000] 5 disabled |
| [ 0.000000] 6 disabled |
| [ 0.000000] 7 disabled |
| [ 0.000000] TOM2: 0000000180000000 aka 6144M |
| [ 0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106 |
| [ 0.000000] e820: last_pfn = 0xbff9b max_arch_pfn = 0x400000000 |
| [ 0.000000] found SMP MP-table at [mem 0x000f1cf0-0x000f1cff] mapped at [ffff8800000f1cf0] |
| [ 0.000000] Base memory trampoline at [ffff880000099000] 99000 size 24576 |
| [ 0.000000] Using GB pages for direct mapping |
| [ 0.000000] init_memory_mapping: [mem 0x00000000-0x000fffff] |
| [ 0.000000] [mem 0x00000000-0x000fffff] page 4k |
| [ 0.000000] BRK [0x01af3000, 0x01af3fff] PGTABLE |
| [ 0.000000] BRK [0x01af4000, 0x01af4fff] PGTABLE |
| [ 0.000000] BRK [0x01af5000, 0x01af5fff] PGTABLE |
| [ 0.000000] init_memory_mapping: [mem 0x17fe00000-0x17fffffff] |
| [ 0.000000] [mem 0x17fe00000-0x17fffffff] page 1G |
| [ 0.000000] init_memory_mapping: [mem 0x17c000000-0x17fdfffff] |
| [ 0.000000] [mem 0x17c000000-0x17fdfffff] page 1G |
| [ 0.000000] init_memory_mapping: [mem 0x100000000-0x17bffffff] |
| [ 0.000000] [mem 0x100000000-0x17bffffff] page 1G |
| [ 0.000000] init_memory_mapping: [mem 0x00100000-0xbff9afff] |
| [ 0.000000] [mem 0x00100000-0x001fffff] page 4k |
| [ 0.000000] [mem 0x00200000-0x3fffffff] page 2M |
| [ 0.000000] [mem 0x40000000-0x7fffffff] page 1G |
| [ 0.000000] [mem 0x80000000-0xbfdfffff] page 2M |
| [ 0.000000] [mem 0xbfe00000-0xbff9afff] page 4k |
| [ 0.000000] RAMDISK: [mem 0x7f775000-0x7fffefff] |
| [ 0.000000] ACPI: Early table checksum verification disabled |
| [ 0.000000] ACPI: RSDP 0x00000000000F1EC0 000024 (v02 CORE ) |
| [ 0.000000] ACPI: XSDT 0x00000000BFFB40E0 00006C (v01 CORE COREBOOT 00000000 CORE 00000000) |
| [ 0.000000] ACPI: FACP 0x00000000BFFB68A0 000074 (v01 CORE COREBOOT 00000000 CORE 00000000) |
| [ 0.000000] ACPI: DSDT 0x00000000BFFB4250 002644 (v02 ASUS COREBOOT 00000001 INTL 20150204) |
| [ 0.000000] ACPI: FACS 0x00000000BFFB4210 000040 |
| [ 0.000000] ACPI: SSDT 0x00000000BFFB69A0 000E57 (v02 CORE COREBOOT 0000002A CORE 0000002A) |
| [ 0.000000] ACPI: TCPA 0x00000000BFFB7800 000032 (v02 CORE COREBOOT 00000000 CORE 00000000) |
| [ 0.000000] ACPI: APIC 0x00000000BFFB7840 0000C6 (v01 CORE COREBOOT 00000000 CORE 00000000) |
| [ 0.000000] ACPI: SRAT 0x00000000BFFB7910 000178 (v01 CORE COREBOOT 00000000 CORE 00000000) |
| [ 0.000000] ACPI: SLIT 0x00000000BFFB7A88 000030 (v01 CORE COREBOOT 00000000 CORE 00000000) |
| [ 0.000000] ACPI: HPET 0x00000000BFFB7AC0 000038 (v01 CORE COREBOOT 00000000 CORE 00000000) |
| [ 0.000000] ACPI: SRAT 0x00000000BFFB7B00 000178 (v01 CORE COREBOOT 00000000 CORE 00000000) |
| [ 0.000000] ACPI: SLIT 0x00000000BFFB7C78 000030 (v01 CORE COREBOOT 00000000 CORE 00000000) |
| [ 0.000000] ACPI: Local APIC address 0xfee00000 |
| [ 0.000000] SRAT: PXM 0 -> APIC 0x00 -> Node 0 |
| [ 0.000000] SRAT: PXM 0 -> APIC 0x01 -> Node 0 |
| [ 0.000000] SRAT: PXM 0 -> APIC 0x02 -> Node 0 |
| [ 0.000000] SRAT: PXM 0 -> APIC 0x03 -> Node 0 |
| [ 0.000000] SRAT: PXM 1 -> APIC 0x04 -> Node 1 |
| [ 0.000000] SRAT: PXM 1 -> APIC 0x05 -> Node 1 |
| [ 0.000000] SRAT: PXM 1 -> APIC 0x06 -> Node 1 |
| [ 0.000000] SRAT: PXM 1 -> APIC 0x07 -> Node 1 |
| [ 0.000000] SRAT: Node 0 PXM 0 [mem 0x00000000-0x0009ffff] |
| [ 0.000000] SRAT: Node 2 PXM 7 [mem 0x00100000-0xbfffffff] |
| [ 0.000000] SRAT: Node 0 PXM 0 [mem 0x00100000-0xbfffffff] |
| [ 0.000000] SRAT: Node 0 PXM 0 [mem 0x100000000-0x13fffffff] |
| [ 0.000000] SRAT: Node 1 PXM 1 [mem 0x140000000-0x17fffffff] |
| [ 0.000000] NUMA: Initialized distance table, cnt=3 |
| [ 0.000000] NUMA: node 2 [mem 0x00100000-0xbfffffff] overlaps with node 0 [mem 0x00100000-0xbfffffff] |
| [ 0.000000] Scanning NUMA topology in Northbridge 24 |
| [ 0.000000] Number of physical nodes 2 |
| [ 0.000000] Node 0 MemBase 0000000000000000 Limit 0000000140000000 |
| [ 0.000000] Node 1 MemBase 0000000140000000 Limit 0000000180000000 |
| [ 0.000000] Initmem setup node 0 [mem 0x00000000-0x13fffffff] |
| [ 0.000000] NODE_DATA [mem 0x13fffb000-0x13fffffff] |
| [ 0.000000] Initmem setup node 1 [mem 0x140000000-0x17fffffff] |
| [ 0.000000] NODE_DATA [mem 0x17fff9000-0x17fffdfff] |
| [ 0.000000] [ffffea0000000000-ffffea00045fffff] PMD -> [ffff88013be00000-ffff88013f5fffff] on node 0 |
| [ 0.000000] [ffffea0004600000-ffffea00053fffff] PMD -> [ffff88017e600000-ffff88017f3fffff] on node 1 |
| [ 0.000000] Zone ranges: |
| [ 0.000000] DMA [mem 0x00001000-0x00ffffff] |
| [ 0.000000] DMA32 [mem 0x01000000-0xffffffff] |
| [ 0.000000] Normal [mem 0x100000000-0x17fffffff] |
| [ 0.000000] Movable zone start for each node |
| [ 0.000000] Early memory node ranges |
| [ 0.000000] node 0: [mem 0x00001000-0x0009efff] |
| [ 0.000000] node 0: [mem 0x00100000-0xbff9afff] |
| [ 0.000000] node 0: [mem 0x100000000-0x13fffffff] |
| [ 0.000000] node 1: [mem 0x140000000-0x17fffffff] |
| [ 0.000000] On node 0 totalpages: 1048377 |
| [ 0.000000] DMA zone: 56 pages used for memmap |
| [ 0.000000] DMA zone: 21 pages reserved |
| [ 0.000000] DMA zone: 3998 pages, LIFO batch:0 |
| [ 0.000000] DMA32 zone: 10695 pages used for memmap |
| [ 0.000000] DMA32 zone: 782235 pages, LIFO batch:31 |
| [ 0.000000] Normal zone: 3584 pages used for memmap |
| [ 0.000000] Normal zone: 262144 pages, LIFO batch:31 |
| [ 0.000000] On node 1 totalpages: 262144 |
| [ 0.000000] Normal zone: 3584 pages used for memmap |
| [ 0.000000] Normal zone: 262144 pages, LIFO batch:31 |
| [ 0.000000] ACPI: PM-Timer IO Port: 0x2008 |
| [ 0.000000] ACPI: Local APIC address 0xfee00000 |
| [ 0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled) |
| [ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled) |
| [ 0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x02] enabled) |
| [ 0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x03] enabled) |
| [ 0.000000] ACPI: LAPIC (acpi_id[0x04] lapic_id[0x04] enabled) |
| [ 0.000000] ACPI: LAPIC (acpi_id[0x05] lapic_id[0x05] enabled) |
| [ 0.000000] ACPI: LAPIC (acpi_id[0x06] lapic_id[0x06] enabled) |
| [ 0.000000] ACPI: LAPIC (acpi_id[0x07] lapic_id[0x07] enabled) |
| [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1]) |
| [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1]) |
| [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x02] high edge lint[0x1]) |
| [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x03] high edge lint[0x1]) |
| [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x04] high edge lint[0x1]) |
| [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x05] high edge lint[0x1]) |
| [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x06] high edge lint[0x1]) |
| [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x07] high edge lint[0x1]) |
| [ 0.000000] ACPI: IOAPIC (id[0x18] address[0xfec00000] gsi_base[0]) |
| [ 0.000000] IOAPIC[0]: apic_id 24, version 17, address 0xfec00000, GSI 0-23 |
| [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level) |
| [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 14 global_irq 14 high edge) |
| [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 15 global_irq 15 high edge) |
| [ 0.000000] ACPI: IRQ9 used by override. |
| [ 0.000000] ACPI: IRQ14 used by override. |
| [ 0.000000] ACPI: IRQ15 used by override. |
| [ 0.000000] Using ACPI (MADT) for SMP configuration information |
| [ 0.000000] ACPI: HPET id: 0x10de8201 base: 0xfed00000 |
| [ 0.000000] smpboot: Allowing 8 CPUs, 0 hotplug CPUs |
| [ 0.000000] nr_irqs_gsi: 40 |
| [ 0.000000] PM: Registered nosave memory: [mem 0x0009f000-0x0009ffff] |
| [ 0.000000] PM: Registered nosave memory: [mem 0x000a0000-0x000effff] |
| [ 0.000000] PM: Registered nosave memory: [mem 0x000f0000-0x000fffff] |
| [ 0.000000] PM: Registered nosave memory: [mem 0xbff9b000-0xcfffffff] |
| [ 0.000000] PM: Registered nosave memory: [mem 0xd0000000-0xffffffff] |
| [ 0.000000] e820: [mem 0xd0000000-0xffffffff] available for PCI devices |
| [ 0.000000] Booting paravirtualized kernel on bare hardware |
| [ 0.000000] setup_percpu: NR_CPUS:512 nr_cpumask_bits:512 nr_cpu_ids:8 nr_node_ids:2 |
| [ 0.000000] PERCPU: Embedded 27 pages/cpu @ffff88013fc00000 s80896 r8192 d21504 u524288 |
| [ 0.000000] pcpu-alloc: s80896 r8192 d21504 u524288 alloc=1*2097152 |
| [ 0.000000] pcpu-alloc: [0] 0 1 2 3 [1] 4 5 6 7 |
| [ 0.000000] Built 2 zonelists in Node order, mobility grouping on. Total pages: 1292581 |
| [ 0.000000] Policy zone: Normal |
| [ 0.000000] Kernel command line: root=/dev/nfs initrd=initrd-cb-test-tgt rootfstype=nfs nfsroot=10.100.1.1:/nfsroots/cb-test-tgt-01,v3,hard,nointr,tcp ip=10.100.1.10::10.100.1.1:255.255.255.0:embed-o-matic:eth0:off console=tty0 console=ttyS0,115200n8 rw BOOT_IMAGE=vmlinuz-cb-test-tgt |
| [ 0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes) |
| [ 0.000000] AGP: Checking aperture... |
| [ 0.000000] AGP: No AGP bridge found |
| [ 0.000000] AGP: Node 0: aperture [bus addr 0xe5ea000000-0xe5ebffffff] (32MB) |
| [ 0.000000] Aperture beyond 4GB. Ignoring. |
| [ 0.000000] AGP: Your BIOS doesn't leave a aperture memory hole |
| [ 0.000000] AGP: Please enable the IOMMU option in the BIOS setup |
| [ 0.000000] AGP: This costs you 64MB of RAM |
| [ 0.000000] AGP: Mapping aperture over RAM [mem 0xb4000000-0xb7ffffff] (65536KB) |
| [ 0.000000] PM: Registered nosave memory: [mem 0xb4000000-0xb7ffffff] |
| [ 0.000000] Memory: 5017492K/5242084K available (5203K kernel code, 943K rwdata, 1832K rodata, 1204K init, 840K bss, 224592K reserved) |
| [ 0.000000] Hierarchical RCU implementation. |
| [ 0.000000] RCU dyntick-idle grace-period acceleration is enabled. |
| [ 0.000000] RCU restricting CPUs from NR_CPUS=512 to nr_cpu_ids=8. |
| [ 0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=8 |
| [ 0.000000] NR_IRQS:33024 nr_irqs:744 16 |
| [ 0.000000] spurious 8259A interrupt: IRQ7. |
| [ 0.000000] Console: colour VGA+ 80x25 |
| [ 0.000000] console [tty0] enabled |
| [ 0.000000] console [ttyS0] enabled |
| [ 0.000000] mempolicy: Disabling automatic NUMA balancing. Configure with numa_balancing= or the kernel.numa_balancing sysctl |
| [ 0.000000] hpet clockevent registered |
| [ 0.000000] tsc: Fast TSC calibration using PIT |
| [ 0.000000] tsc: Detected 1909.791 MHz processor |
| [ 0.000158] Calibrating delay loop (skipped), value calculated using timer frequency.. 3819.58 BogoMIPS (lpj=7639164) |
| [ 0.010962] pid_max: default: 32768 minimum: 301 |
| [ 0.015684] ACPI: Core revision 20140424 |
| [ 0.022092] ACPI: All ACPI Tables successfully acquired |
| [ 0.027592] Security Framework initialized |
| [ 0.031771] AppArmor: AppArmor disabled by boot time parameter |
| [ 0.037681] Yama: disabled by default; enable with sysctl kernel.yama.* |
| [ 0.045489] Dentry cache hash table entries: 1048576 (order: 11, 8388608 bytes) |
| [ 0.058742] Inode-cache hash table entries: 524288 (order: 10, 4194304 bytes) |
| [ 0.068557] Mount-cache hash table entries: 16384 (order: 5, 131072 bytes) |
| [ 0.075572] Mountpoint-cache hash table entries: 16384 (order: 5, 131072 bytes) |
| [ 0.083518] Initializing cgroup subsys memory |
| [ 0.088000] Initializing cgroup subsys devices |
| [ 0.092552] Initializing cgroup subsys freezer |
| [ 0.097077] Initializing cgroup subsys net_cls |
| [ 0.101622] Initializing cgroup subsys blkio |
| [ 0.105977] Initializing cgroup subsys perf_event |
| [ 0.110773] Initializing cgroup subsys net_prio |
| [ 0.115430] tseg: 0000000000 |
| [ 0.115444] CPU: Physical Processor ID: 0 |
| [ 0.119565] CPU: Processor Core ID: 0 |
| [ 0.124365] mce: CPU supports 6 MCE banks |
| [ 0.128506] LVT offset 0 assigned for vector 0xf9 |
| [ 0.133307] Last level iTLB entries: 4KB 512, 2MB 16, 4MB 8 |
| Last level dTLB entries: 4KB 512, 2MB 128, 4MB 64, 1GB 0 |
| tlb_flushall_shift: 6 |
| [ 0.148783] Freeing SMP alternatives memory: 20K (ffffffff81a1a000 - ffffffff81a1f000) |
| [ 0.157919] ftrace: allocating 21601 entries in 85 pages |
| [ 0.173376] ..TIMER: vector=0x30 apic1=0 pin1=0 apic2=0 pin2=0 |
| [ 0.219029] smpboot: CPU0: Quad-Core AMD Opteron(tm) Processor 8347 (fam: 10, model: 02, stepping: 01) |
| [ 0.336310] Performance Events: AMD PMU driver. |
| [ 0.341021] ... version: 0 |
| [ 0.345119] ... bit width: 48 |
| [ 0.349313] ... generic registers: 4 |
| [ 0.353411] ... value mask: 0000ffffffffffff |
| [ 0.358801] ... max period: 00007fffffffffff |
| [ 0.364191] ... fixed-purpose events: 0 |
| [ 0.368295] ... event mask: 000000000000000f |
| [ 0.376322] NMI watchdog: enabled on all CPUs, permanently consumes one hw-PMU counter. |
| [ 0.384628] x86: Booting SMP configuration: |
| [ 0.388907] .... node #0, CPUs: #1 #2 #3 |
| [ 0.433495] .... node #1, CPUs: #4 #5 #6 #7 |
| [ 0.585132] x86: Booted up 2 nodes, 8 CPUs |
| [ 0.589577] smpboot: Total of 8 processors activated (30557.56 BogoMIPS) |
| [ 0.602175] devtmpfs: initialized |
| [ 0.614186] pinctrl core: initialized pinctrl subsystem |
| [ 0.619662] NET: Registered protocol family 16 |
| [ 0.624400] cpuidle: using governor ladder |
| [ 0.628582] cpuidle: using governor menu |
| [ 0.632588] node 0 link 1: io port [1000, 3fff] |
| [ 0.632591] TOM: 00000000c0000000 aka 3072M |
| [ 0.636855] Fam 10h mmconf [mem 0xc0000000-0xcfffffff] |
| [ 0.636859] node 0 link 1: mmio [fc000000, fc3fffff] |
| [ 0.636862] node 0 link 1: mmio [f8000000, fbffffff] |
| [ 0.636864] TOM2: 0000000180000000 aka 6144M |
| [ 0.641202] bus: [bus 00-05] on node 0 link 1 |
| [ 0.641204] bus: 00 [io 0x0000-0xffff] |
| [ 0.641206] bus: 00 [mem 0xd0000000-0xffffffff] |
| [ 0.641208] bus: 00 [mem 0x180000000-0xfcffffffff] |
| [ 0.641313] ACPI: bus type PCI registered |
| [ 0.645404] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5 |
| [ 0.652077] PCI: Using configuration type 1 for base access |
| [ 0.657728] PCI: Using configuration type 1 for extended access |
| [ 0.664344] mtrr: your CPUs had inconsistent variable MTRR settings |
| [ 0.670703] mtrr: probably your BIOS does not setup all CPUs. |
| [ 0.676537] mtrr: corrected configuration. |
| [ 0.693205] ACPI: Added _OSI(Module Device) |
| [ 0.697512] ACPI: Added _OSI(Processor Device) |
| [ 0.702023] ACPI: Added _OSI(3.0 _SCP Extensions) |
| [ 0.706806] ACPI: Added _OSI(Processor Aggregator Device) |
| [ 0.715890] ACPI: Interpreter enabled |
| [ 0.719637] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S2_] (20140424/hwxface-580) |
| [ 0.729081] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S3_] (20140424/hwxface-580) |
| [ 0.738527] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S4_] (20140424/hwxface-580) |
| [ 0.747983] ACPI: (supports S0 S1 S5) |
| [ 0.751722] ACPI: Using IOAPIC for interrupt routing |
| [ 0.756808] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug |
| [ 0.784586] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-05]) |
| [ 0.790845] acpi PNP0A03:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI] |
| [ 0.799168] acpi PNP0A03:00: _OSC: OS now controls [PCIeHotplug PME AER PCIeCapability] |
| [ 0.836776] acpi PNP0A03:00: host bridge window expanded to [io 0x0000-0x0cf7]; [io 0x03b0-0x03df] ignored |
| [ 0.846892] PCI host bridge to bus 0000:00 |
| [ 0.851091] pci_bus 0000:00: root bus resource [bus 00-05] |
| [ 0.856667] pci_bus 0000:00: root bus resource [io 0x0d00-0x3fff] |
| [ 0.862941] pci_bus 0000:00: root bus resource [mem 0xf8000000-0xfbffffff] |
| [ 0.869913] pci_bus 0000:00: root bus resource [mem 0xfc000000-0xfc3fffff] |
| [ 0.876884] pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7] |
| [ 0.883166] pci 0000:00:00.0: [10de:005e] type 00 class 0x058000 |
| [ 0.883347] pci 0000:00:01.0: [10de:0051] type 00 class 0x060100 |
| [ 0.883355] pci 0000:00:01.0: reg 0x10: [io 0x2c00-0x2c7f] |
| [ 0.883493] pci 0000:00:01.1: [10de:0052] type 00 class 0x0c0500 |
| [ 0.883501] pci 0000:00:01.1: reg 0x10: [io 0x3000-0x301f] |
| [ 0.883526] pci 0000:00:01.1: reg 0x20: [io 0x2c80-0x2cbf] |
| [ 0.883531] pci 0000:00:01.1: reg 0x24: [io 0x2cc0-0x2cff] |
| [ 0.883561] pci 0000:00:01.1: PME# supported from D3hot D3cold |
| [ 0.883658] pci 0000:00:02.0: [10de:005a] type 00 class 0x0c0310 |
| [ 0.883673] pci 0000:00:02.0: reg 0x10: [mem 0xfc300000-0xfc300fff] |
| [ 0.883699] pci 0000:00:02.0: supports D1 D2 |
| [ 0.883711] pci 0000:00:02.0: PME# supported from D0 D1 D2 D3hot D3cold |
| [ 0.883772] pci 0000:00:02.0: System wakeup disabled by ACPI |
| [ 0.889582] pci 0000:00:02.1: [10de:005b] type 00 class 0x0c0320 |
| [ 0.889597] pci 0000:00:02.1: reg 0x10: [mem 0xfc303000-0xfc3030ff] |
| [ 0.889638] pci 0000:00:02.1: supports D1 D2 |
| [ 0.889640] pci 0000:00:02.1: PME# supported from D0 D1 D2 D3hot D3cold |
| [ 0.889689] pci 0000:00:02.1: System wakeup disabled by ACPI |
| [ 0.895488] pci 0000:00:06.0: [10de:0053] type 00 class 0x01018a |
| [ 0.895532] pci 0000:00:06.0: reg 0x20: [io 0x3020-0x302f] |
| [ 0.895543] pci 0000:00:06.0: legacy IDE quirk: reg 0x10: [io 0x01f0-0x01f7] |
| [ 0.902771] pci 0000:00:06.0: legacy IDE quirk: reg 0x14: [io 0x03f6] |
| [ 0.909389] pci 0000:00:06.0: legacy IDE quirk: reg 0x18: [io 0x0170-0x0177] |
| [ 0.916615] pci 0000:00:06.0: legacy IDE quirk: reg 0x1c: [io 0x0376] |
| [ 0.923328] pci 0000:00:07.0: [10de:0054] type 00 class 0x010185 |
| [ 0.923339] pci 0000:00:07.0: reg 0x10: [io 0x3050-0x3057] |
| [ 0.923343] pci 0000:00:07.0: reg 0x14: [io 0x3070-0x3073] |
| [ 0.923348] pci 0000:00:07.0: reg 0x18: [io 0x3058-0x305f] |
| [ 0.923353] pci 0000:00:07.0: reg 0x1c: [io 0x3074-0x3077] |
| [ 0.923357] pci 0000:00:07.0: reg 0x20: [io 0x3030-0x303f] |
| [ 0.923362] pci 0000:00:07.0: reg 0x24: [mem 0xfc301000-0xfc301fff] |
| [ 0.923507] pci 0000:00:08.0: [10de:0055] type 00 class 0x010185 |
| [ 0.923518] pci 0000:00:08.0: reg 0x10: [io 0x3060-0x3067] |
| [ 0.923529] pci 0000:00:08.0: reg 0x14: [io 0x3078-0x307b] |
| [ 0.923533] pci 0000:00:08.0: reg 0x18: [io 0x3068-0x306f] |
| [ 0.923546] pci 0000:00:08.0: reg 0x1c: [io 0x307c-0x307f] |
| [ 0.923562] pci 0000:00:08.0: reg 0x20: [io 0x3040-0x304f] |
| [ 0.923576] pci 0000:00:08.0: reg 0x24: [mem 0xfc302000-0xfc302fff] |
| [ 0.923751] pci 0000:00:09.0: [10de:005c] type 01 class 0x060400 |
| [ 0.923849] pci 0000:00:09.0: System wakeup disabled by ACPI |
| [ 0.929639] pci 0000:00:0b.0: [10de:005d] type 01 class 0x060400 |
| [ 0.929689] pci 0000:00:0b.0: PME# supported from D0 D1 D2 D3hot D3cold |
| [ 0.929745] pci 0000:00:0b.0: System wakeup disabled by ACPI |
| [ 0.935524] pci 0000:00:0c.0: [10de:005d] type 01 class 0x060400 |
| [ 0.935577] pci 0000:00:0c.0: PME# supported from D0 D1 D2 D3hot D3cold |
| [ 0.935674] pci 0000:00:0c.0: System wakeup disabled by ACPI |
| [ 0.941491] pci 0000:00:0d.0: [10de:005d] type 01 class 0x060400 |
| [ 0.941531] pci 0000:00:0d.0: PME# supported from D0 D1 D2 D3hot D3cold |
| [ 0.941595] pci 0000:00:0d.0: System wakeup disabled by ACPI |
| [ 0.947393] pci 0000:00:0e.0: [10de:005d] type 01 class 0x060400 |
| [ 0.947434] pci 0000:00:0e.0: PME# supported from D0 D1 D2 D3hot D3cold |
| [ 0.947491] pci 0000:00:0e.0: System wakeup disabled by ACPI |
| [ 0.953327] pci 0000:00:18.0: [1022:1200] type 00 class 0x060000 |
| [ 0.953498] pci 0000:00:18.1: [1022:1201] type 00 class 0x060000 |
| [ 0.953613] pci 0000:00:18.2: [1022:1202] type 00 class 0x060000 |
| [ 0.953736] pci 0000:00:18.3: [1022:1203] type 00 class 0x060000 |
| [ 0.953880] pci 0000:00:18.4: [1022:1204] type 00 class 0x060000 |
| [ 0.953999] pci 0000:00:19.0: [1022:1200] type 00 class 0x060000 |
| [ 0.954153] pci 0000:00:19.1: [1022:1201] type 00 class 0x060000 |
| [ 0.954275] pci 0000:00:19.2: [1022:1202] type 00 class 0x060000 |
| [ 0.954415] pci 0000:00:19.3: [1022:1203] type 00 class 0x060000 |
| [ 0.954580] pci 0000:00:19.4: [1022:1204] type 00 class 0x060000 |
| [ 0.954745] pci 0000:01:04.0: [18ca:0020] type 00 class 0x030000 |
| [ 0.954770] pci 0000:01:04.0: reg 0x10: [mem 0xf8000000-0xfbffffff pref] |
| [ 0.954788] pci 0000:01:04.0: reg 0x14: [mem 0xfc000000-0xfc03ffff] |
| [ 0.954805] pci 0000:01:04.0: reg 0x18: [io 0x1000-0x107f] |
| [ 0.954840] pci 0000:01:04.0: supports D1 D2 |
| [ 0.954952] pci 0000:00:09.0: PCI bridge to [bus 01] |
| [ 0.959994] pci 0000:00:09.0: bridge window [io 0x1000-0x1fff] |
| [ 0.959997] pci 0000:00:09.0: bridge window [mem 0xfc000000-0xfc0fffff] |
| [ 0.960000] pci 0000:00:09.0: bridge window [mem 0xf8000000-0xfbffffff pref] |
| [ 0.960099] pci 0000:02:00.0: [14e4:1659] type 00 class 0x020000 |
| [ 0.960128] pci 0000:02:00.0: reg 0x10: [mem 0xfc100000-0xfc10ffff 64bit] |
| [ 0.960165] pci 0000:02:00.0: reg 0x30: [mem 0x68400000-0x6840ffff pref] |
| [ 0.960252] pci 0000:02:00.0: PME# supported from D3hot D3cold |
| [ 0.960376] pci 0000:02:00.0: disabling ASPM on pre-1.1 PCIe device. You can enable it with 'pcie_aspm=force' |
| [ 0.970495] pci 0000:00:0b.0: PCI bridge to [bus 02] |
| [ 0.975537] pci 0000:00:0b.0: bridge window [mem 0xfc100000-0xfc1fffff] |
| [ 0.975635] pci 0000:03:00.0: [14e4:1659] type 00 class 0x020000 |
| [ 0.975660] pci 0000:03:00.0: reg 0x10: [mem 0xfc200000-0xfc20ffff 64bit] |
| [ 0.975779] pci 0000:03:00.0: PME# supported from D3hot D3cold |
| [ 0.975887] pci 0000:03:00.0: disabling ASPM on pre-1.1 PCIe device. You can enable it with 'pcie_aspm=force' |
| [ 0.986012] pci 0000:00:0c.0: PCI bridge to [bus 03] |
| [ 0.991068] pci 0000:00:0c.0: bridge window [mem 0xfc200000-0xfc2fffff] |
| [ 0.991139] pci 0000:00:0d.0: PCI bridge to [bus 04] |
| [ 0.996260] pci 0000:00:0e.0: PCI bridge to [bus 05] |
| [ 1.001346] pci_bus 0000:00: on NUMA node 0 |
| [ 1.001453] ACPI: PCI Interrupt Link [LNKA] (IRQs *16 17 18 19) |
| [ 1.007881] ACPI: PCI Interrupt Link [LNKB] (IRQs 16 *17 18 19) |
| [ 1.014338] ACPI: PCI Interrupt Link [LNKC] (IRQs 16 17 18 19) *0, disabled. |
| [ 1.021990] ACPI: PCI Interrupt Link [LNKD] (IRQs 16 17 18 19) *0, disabled. |
| [ 1.029635] ACPI: PCI Interrupt Link [LNKE] (IRQs 16 17 18 19) *0, disabled. |
| [ 1.037282] ACPI: PCI Interrupt Link [LLAS] (IRQs 20 21 22 23) *0, disabled. |
| [ 1.044938] ACPI: PCI Interrupt Link [LUOH] (IRQs 20 21 22 *23) |
| [ 1.051357] ACPI: PCI Interrupt Link [LUEH] (IRQs 20 21 *22 23) |
| [ 1.057782] ACPI: PCI Interrupt Link [LAUD] (IRQs 20 21 22 23) *0, disabled. |
| [ 1.065421] ACPI: PCI Interrupt Link [LMOD] (IRQs 20 21 22 23) *0, disabled. |
| [ 1.073069] ACPI: PCI Interrupt Link [LPA0] (IRQs 20 21 22 23) *0, disabled. |
| [ 1.080726] ACPI: PCI Interrupt Link [LSA0] (IRQs 20 *21 22 23) |
| [ 1.087156] ACPI: PCI Interrupt Link [LSA1] (IRQs *20 21 22 23) |
| [ 1.093604] ACPI: PCI Interrupt Link [LEMA] (IRQs 20 21 22 23) *0, disabled. |
| [ 1.101248] ACPI: PCI Interrupt Link [LUB0] (IRQs 20 21 22 23) *0, disabled. |
| [ 1.108900] ACPI: PCI Interrupt Link [LUB2] (IRQs 20 21 22 23) *0, disabled. |
| [ 1.116569] ACPI: PCI Interrupt Link [LKSM] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled. |
| [ 1.125690] ACPI: PCI Interrupt Link [LNIA] (IRQs 16) *0, disabled. |
| [ 1.132401] ACPI: PCI Interrupt Link [LNIB] (IRQs 17) *0, disabled. |
| [ 1.139125] ACPI: PCI Interrupt Link [LNIC] (IRQs 18) *0, disabled. |
| [ 1.145837] ACPI: PCI Interrupt Link [LNND] (IRQs 19) *0, disabled. |
| [ 1.152808] ACPI: Enabled 1 GPEs in block 00 to 1F |
| [ 1.158060] vgaarb: setting as boot device: PCI:0000:01:04.0 |
| [ 1.163845] vgaarb: device added: PCI:0000:01:04.0,decodes=io+mem,owns=io+mem,locks=none |
| [ 1.172035] vgaarb: loaded |
| [ 1.174832] vgaarb: bridge control possible 0000:01:04.0 |
| [ 1.180390] PCI: Using ACPI for IRQ routing |
| [ 1.184672] PCI: pci_cache_line_size set to 64 bytes |
| [ 1.184729] e820: reserve RAM buffer [mem 0x0009fc00-0x0009ffff] |
| [ 1.184733] e820: reserve RAM buffer [mem 0xbff9b000-0xbfffffff] |
| [ 1.185062] HPET: 3 timers in total, 0 timers will be used for per-cpu timer |
| [ 1.192199] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 31 |
| [ 1.197467] hpet0: 3 comparators, 32-bit 25.000000 MHz counter |
| [ 1.206203] Switched to clocksource hpet |
| [ 1.221841] pnp: PnP ACPI init |
| [ 1.225072] ACPI: bus type PNP registered |
| [ 1.229685] pnp 00:00: Plug and Play ACPI device, IDs PNP0303 PNP030b (active) |
| [ 1.229771] pnp 00:01: Plug and Play ACPI device, IDs PNP0f03 PNP0f13 (active) |
| [ 1.229855] pnp 00:02: Plug and Play ACPI device, IDs PNP0501 (active) |
| [ 1.229950] pnp 00:03: Plug and Play ACPI device, IDs PNP0501 (active) |
| [ 1.229988] pnp 00:04: [dma 2] |
| [ 1.230035] pnp 00:04: Plug and Play ACPI device, IDs PNP0700 (active) |
| [ 1.230057] pnp: PnP ACPI: found 5 devices |
| [ 1.234260] ACPI: bus type PNP unregistered |
| [ 1.246306] pci 0000:02:00.0: can't claim BAR 6 [mem 0x68400000-0x6840ffff pref]: no compatible bridge window |
| [ 1.256395] pci 0000:00:09.0: PCI bridge to [bus 01] |
| [ 1.261432] pci 0000:00:09.0: bridge window [io 0x1000-0x1fff] |
| [ 1.267604] pci 0000:00:09.0: bridge window [mem 0xfc000000-0xfc0fffff] |
| [ 1.274477] pci 0000:00:09.0: bridge window [mem 0xf8000000-0xfbffffff pref] |
| [ 1.281811] pci 0000:02:00.0: BAR 6: assigned [mem 0xfc110000-0xfc11ffff pref] |
| [ 1.289174] pci 0000:00:0b.0: PCI bridge to [bus 02] |
| [ 1.294223] pci 0000:00:0b.0: bridge window [mem 0xfc100000-0xfc1fffff] |
| [ 1.301099] pci 0000:00:0c.0: PCI bridge to [bus 03] |
| [ 1.306143] pci 0000:00:0c.0: bridge window [mem 0xfc200000-0xfc2fffff] |
| [ 1.313012] pci 0000:00:0d.0: PCI bridge to [bus 04] |
| [ 1.318077] pci 0000:00:0e.0: PCI bridge to [bus 05] |
| [ 1.323129] pci_bus 0000:00: resource 4 [io 0x0d00-0x3fff] |
| [ 1.323132] pci_bus 0000:00: resource 5 [mem 0xf8000000-0xfbffffff] |
| [ 1.323135] pci_bus 0000:00: resource 6 [mem 0xfc000000-0xfc3fffff] |
| [ 1.323137] pci_bus 0000:00: resource 7 [io 0x0000-0x0cf7] |
| [ 1.323141] pci_bus 0000:01: resource 0 [io 0x1000-0x1fff] |
| [ 1.323143] pci_bus 0000:01: resource 1 [mem 0xfc000000-0xfc0fffff] |
| [ 1.323146] pci_bus 0000:01: resource 2 [mem 0xf8000000-0xfbffffff pref] |
| [ 1.323149] pci_bus 0000:02: resource 1 [mem 0xfc100000-0xfc1fffff] |
| [ 1.323151] pci_bus 0000:03: resource 1 [mem 0xfc200000-0xfc2fffff] |
| [ 1.323288] NET: Registered protocol family 2 |
| [ 1.328255] TCP established hash table entries: 65536 (order: 7, 524288 bytes) |
| [ 1.336071] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes) |
| [ 1.343491] TCP: Hash tables configured (established 65536 bind 65536) |
| [ 1.350175] TCP: reno registered |
| [ 1.353495] UDP hash table entries: 4096 (order: 5, 131072 bytes) |
| [ 1.359770] UDP-Lite hash table entries: 4096 (order: 5, 131072 bytes) |
| [ 1.366627] NET: Registered protocol family 1 |
| [ 1.371468] ACPI: PCI Interrupt Link [LUB0] enabled at IRQ 23 |
| [ 1.377662] ACPI: PCI Interrupt Link [LUB2] enabled at IRQ 22 |
| [ 1.383651] pci 0000:00:00.0: Found enabled HT MSI Mapping |
| [ 1.389275] pci 0000:00:00.0: Found enabled HT MSI Mapping |
| [ 1.394856] pci 0000:00:0b.0: Found disabled HT MSI Mapping |
| [ 1.400516] pci 0000:00:00.0: Found enabled HT MSI Mapping |
| [ 1.406147] pci 0000:00:00.0: Found enabled HT MSI Mapping |
| [ 1.411733] pci 0000:00:0c.0: Found disabled HT MSI Mapping |
| [ 1.417393] pci 0000:00:00.0: Found enabled HT MSI Mapping |
| [ 1.423008] pci 0000:00:00.0: Found enabled HT MSI Mapping |
| [ 1.428584] pci 0000:00:0d.0: Found disabled HT MSI Mapping |
| [ 1.434244] pci 0000:00:00.0: Found enabled HT MSI Mapping |
| [ 1.439860] pci 0000:00:00.0: Found enabled HT MSI Mapping |
| [ 1.445443] pci 0000:00:0e.0: Found disabled HT MSI Mapping |
| [ 1.451105] pci 0000:00:00.0: Found enabled HT MSI Mapping |
| [ 1.456705] pci 0000:01:04.0: Video device with shadowed ROM |
| [ 1.456714] PCI: CLS 64 bytes, default 64 |
| [ 1.456821] Unpacking initramfs... |
| [ 1.689586] Freeing initrd memory: 8744K (ffff88007f775000 - ffff88007ffff000) |
| [ 1.697567] PCI-DMA: Disabling AGP. |
| [ 1.702806] PCI-DMA: aperture base @ b4000000 size 65536 KB |
| [ 1.708472] PCI-DMA: using GART IOMMU. |
| [ 1.712303] PCI-DMA: Reserving 64MB of IOMMU area in the AGP aperture |
| [ 1.724757] platform rtc_cmos: registered platform RTC device (no PNP device found) |
| [ 1.733096] microcode: CPU0: patch_level=0x01000096 |
| [ 1.738093] microcode: CPU1: patch_level=0x01000096 |
| [ 1.743100] microcode: CPU2: patch_level=0x01000096 |
| [ 1.748112] microcode: CPU3: patch_level=0x01000096 |
| [ 1.753119] microcode: CPU4: patch_level=0x01000096 |
| [ 1.758120] microcode: CPU5: patch_level=0x01000096 |
| [ 1.763112] microcode: CPU6: patch_level=0x01000096 |
| [ 1.769212] microcode: CPU7: patch_level=0x01000096 |
| [ 1.774301] microcode: Microcode Update Driver: v2.00 <tigran@aivazian.fsnet.co.uk>, Peter Oruba |
| [ 1.783239] LVT offset 1 assigned for vector 0x400 |
| [ 1.788137] IBS: LVT offset 1 assigned |
| [ 1.792011] perf: AMD IBS detected (0x00000007) |
| [ 1.797241] futex hash table entries: 2048 (order: 5, 131072 bytes) |
| [ 1.803722] audit: initializing netlink subsys (disabled) |
| [ 1.809227] audit: type=2000 audit(1434050975.620:1): initialized |
| [ 1.816191] HugeTLB registered 2 MB page size, pre-allocated 0 pages |
| [ 1.822691] zbud: loaded |
| [ 1.825655] VFS: Disk quotas dquot_6.5.2 |
| [ 1.829709] Dquot-cache hash table entries: 512 (order 0, 4096 bytes) |
| [ 1.836346] msgmni has been set to 9945 |
| [ 1.840796] alg: No test for stdrng (krng) |
| [ 1.845074] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252) |
| [ 1.852720] io scheduler noop registered |
| [ 1.856734] io scheduler deadline registered |
| [ 1.861177] io scheduler cfq registered (default) |
| [ 1.866194] pcieport 0000:00:0b.0: irq 40 for MSI/MSI-X |
| [ 1.866321] pcieport 0000:00:0c.0: irq 41 for MSI/MSI-X |
| [ 1.866435] pcieport 0000:00:0d.0: irq 42 for MSI/MSI-X |
| [ 1.866561] pcieport 0000:00:0e.0: irq 43 for MSI/MSI-X |
| [ 1.866728] aer 0000:00:0b.0:pcie02: service driver aer loaded |
| [ 1.866755] aer 0000:00:0c.0:pcie02: service driver aer loaded |
| [ 1.866781] aer 0000:00:0d.0:pcie02: service driver aer loaded |
| [ 1.866807] aer 0000:00:0e.0:pcie02: service driver aer loaded |
| [ 1.866829] pcieport 0000:00:0b.0: Signaling PME through PCIe PME interrupt |
| [ 1.873905] pci 0000:02:00.0: Signaling PME through PCIe PME interrupt |
| [ 1.880533] pcie_pme 0000:00:0b.0:pcie01: service driver pcie_pme loaded |
| [ 1.880543] pcieport 0000:00:0c.0: Signaling PME through PCIe PME interrupt |
| [ 1.887584] pci 0000:03:00.0: Signaling PME through PCIe PME interrupt |
| [ 1.894193] pcie_pme 0000:00:0c.0:pcie01: service driver pcie_pme loaded |
| [ 1.894203] pcieport 0000:00:0d.0: Signaling PME through PCIe PME interrupt |
| [ 1.901247] pcie_pme 0000:00:0d.0:pcie01: service driver pcie_pme loaded |
| [ 1.901256] pcieport 0000:00:0e.0: Signaling PME through PCIe PME interrupt |
| [ 1.908301] pcie_pme 0000:00:0e.0:pcie01: service driver pcie_pme loaded |
| [ 1.908333] pci_hotplug: PCI Hot Plug PCI Core version: 0.5 |
| [ 1.914024] pciehp: PCI Express Hot Plug Controller Driver version: 0.4 |
| [ 1.920859] GHES: HEST is not enabled! |
| [ 1.924826] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled |
| [ 1.951617] 00:02: ttyS0 at I/O 0x3f8 (irq = 4, base_baud = 115200) is a 16550A |
| [ 1.979413] 00:03: ttyS1 at I/O 0x2f8 (irq = 3, base_baud = 115200) is a 16550A |
| [ 1.987429] Linux agpgart interface v0.103 |
| [ 1.991843] i8042: PNP: PS/2 Controller [PNP0303:KBD,PNP0f03:MOU] at 0x60,0x64 irq 1,12 |
| [ 2.002220] serio: i8042 KBD port at 0x60,0x64 irq 1 |
| [ 2.007333] serio: i8042 AUX port at 0x60,0x64 irq 12 |
| [ 2.012672] mousedev: PS/2 mouse device common for all mice |
| [ 2.018440] rtc_cmos rtc_cmos: RTC can wake from S4 |
| [ 2.023648] rtc_cmos rtc_cmos: rtc core: registered rtc_cmos as rtc0 |
| [ 2.030153] rtc_cmos rtc_cmos: alarms up to one year, y3k, 114 bytes nvram, hpet irqs |
| [ 2.038133] ledtrig-cpu: registered to indicate activity on CPUs |
| [ 2.044399] AMD IOMMUv2 driver by Joerg Roedel <joerg.roedel@amd.com> |
| [ 2.050914] AMD IOMMUv2 functionality not available on this system |
| [ 2.057329] TCP: cubic registered |
| [ 2.060898] NET: Registered protocol family 10 |
| [ 2.063934] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input0 |
| [ 2.074585] mip6: Mobile IPv6 |
| [ 2.077647] NET: Registered protocol family 17 |
| [ 2.082202] mpls_gso: MPLS GSO support |
| [ 2.086858] registered taskstats version 1 |
| [ 2.091818] rtc_cmos rtc_cmos: setting system clock to 2015-06-11 19:29:37 UTC (1434050977) |
| [ 2.100409] PM: Hibernation image not present or could not be loaded. |
| [ 2.102245] Freeing unused kernel memory: 1204K (ffffffff818ed000 - ffffffff81a1a000) |
| [ 2.110227] Write protecting the kernel read-only data: 8192k |
| [ 2.119553] Freeing unused kernel memory: 928K (ffff880001518000 - ffff880001600000) |
| [ 2.128297] Freeing unused kernel memory: 216K (ffff8800017ca000 - ffff880001800000) |
| [ 2.152340] systemd-udevd[98]: starting version 215 |
| [ 2.158221] random: systemd-udevd urandom read with 3 bits of entropy available |
| [ 2.188742] ACPI: bus type USB registered |
| [ 2.193040] usbcore: registered new interface driver usbfs |
| [ 2.198694] usbcore: registered new interface driver hub |
| [ 2.204303] usbcore: registered new device driver usb |
| [ 2.204320] pps_core: LinuxPPS API ver. 1 registered |
| [ 2.204321] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it> |
| [ 2.224402] PTP clock support registered |
| [ 2.228718] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver |
| [ 2.235740] tg3.c:v3.137 (May 11, 2014) |
| [ 2.239722] tg3 0000:02:00.0: enabling device (0004 -> 0006) |
| [ 2.245647] ehci-pci: EHCI PCI platform driver |
| [ 2.245751] ACPI: PCI Interrupt Link [LNIB] enabled at IRQ 17 |
| [ 2.256329] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver |
| [ 2.256391] ehci-pci 0000:00:02.1: EHCI Host Controller |
| [ 2.256411] ehci-pci 0000:00:02.1: new USB bus registered, assigned bus number 1 |
| [ 2.256429] ehci-pci 0000:00:02.1: debug port 1 |
| [ 2.256477] ehci-pci 0000:00:02.1: cache line size of 64 is not supported |
| [ 2.256505] ehci-pci 0000:00:02.1: irq 22, io mem 0xfc303000 |
| [ 2.265865] ehci-pci 0000:00:02.1: USB 2.0 started, EHCI 1.00 |
| [ 2.265937] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002 |
| [ 2.265939] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 |
| [ 2.265940] usb usb1: Product: EHCI Host Controller |
| [ 2.265941] usb usb1: Manufacturer: Linux 3.16.0-4-amd64 ehci_hcd |
| [ 2.265943] usb usb1: SerialNumber: 0000:00:02.1 |
| [ 2.266258] hub 1-0:1.0: USB hub found |
| [ 2.266269] hub 1-0:1.0: 10 ports detected |
| [ 2.330274] ohci-pci: OHCI PCI platform driver |
| [ 2.335097] ohci-pci 0000:00:02.0: OHCI PCI host controller |
| [ 2.340835] ohci-pci 0000:00:02.0: new USB bus registered, assigned bus number 2 |
| [ 2.348404] ohci-pci 0000:00:02.0: irq 23, io mem 0xfc300000 |
| [ 2.372109] tg3 0000:02:00.0 eth0: Tigon3 [partno(BCM95721) rev 4201] (PCI Express) MAC address 00:1e:8c:51:61:a2 |
| [ 2.382495] tg3 0000:02:00.0 eth0: attached PHY is 5750 (10/100/1000Base-T Ethernet) (WireSpeed[1], EEE[0]) |
| [ 2.392362] tg3 0000:02:00.0 eth0: RXcsums[1] LinkChgREG[0] MIirq[0] ASF[0] TSOcap[1] |
| [ 2.400300] tg3 0000:02:00.0 eth0: dma_rwctrl[76180000] dma_mask[64-bit] |
| [ 2.407188] tg3 0000:03:00.0: enabling device (0004 -> 0006) |
| [ 2.413079] ACPI: PCI Interrupt Link [LNIA] enabled at IRQ 16 |
| [ 2.415871] usb usb2: New USB device found, idVendor=1d6b, idProduct=0001 |
| [ 2.415873] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1 |
| [ 2.415875] usb usb2: Product: OHCI PCI host controller |
| [ 2.415876] usb usb2: Manufacturer: Linux 3.16.0-4-amd64 ohci_hcd |
| [ 2.415877] usb usb2: SerialNumber: 0000:00:02.0 |
| [ 2.416094] hub 2-0:1.0: USB hub found |
| [ 2.416103] hub 2-0:1.0: 10 ports detected |
| [ 2.502357] tg3 0000:03:00.0 eth1: Tigon3 [partno(BCM95721) rev 4201] (PCI Express) MAC address 00:1e:8c:51:63:95 |
| [ 2.512790] tg3 0000:03:00.0 eth1: attached PHY is 5750 (10/100/1000Base-T Ethernet) (WireSpeed[1], EEE[0]) |
| [ 2.522656] tg3 0000:03:00.0 eth1: RXcsums[1] LinkChgREG[0] MIirq[0] ASF[0] TSOcap[1] |
| [ 2.530609] tg3 0000:03:00.0 eth1: dma_rwctrl[76180000] dma_mask[64-bit] |
| [ 2.544823] FS-Cache: Loaded |
| [ 2.551408] RPC: Registered named UNIX socket transport module. |
| [ 2.558064] RPC: Registered udp transport module. |
| [ 2.564127] RPC: Registered tcp transport module. |
| [ 2.570218] RPC: Registered tcp NFSv4.1 backchannel transport module. |
| [ 2.582747] FS-Cache: Netfs 'nfs' registered for caching |
| [ 2.600979] tg3 0000:02:00.0: irq 44 for MSI/MSI-X |
| [ 2.645857] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready |
| [ 2.721700] tsc: Refined TSC clocksource calibration: 1909.787 MHz |
| [ 3.725464] Switched to clocksource tsc |
| [ 4.303511] tg3 0000:02:00.0 eth0: Link is up at 100 Mbps, full duplex |
| [ 4.310190] tg3 0000:02:00.0 eth0: Flow control is on for TX and on for RX |
| [ 4.317151] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready |
| [ 11.322869] systemd[1]: systemd 215 running in system mode. (+PAM +AUDIT +SELINUX +IMA +SYSVINIT +LIBCRYPTSETUP +GCRYPT +ACL +XZ -SECCOMP -APPARMOR) |
| [ 11.337039] systemd[1]: Detected architecture 'x86-64'. |
| [ 13.184036] random: nonblocking pool is initialized |
| [ 13.653654] systemd[1]: Inserted module 'autofs4' |
| [ 13.675728] systemd[1]: Set hostname to <cb-test-tgt>. |
| [ 17.188875] systemd[1]: Cannot add dependency job for unit dbus.socket, ignoring: Unit dbus.socket failed to load: No such file or directory. |
| [ 17.201752] systemd[1]: Cannot add dependency job for unit display-manager.service, ignoring: Unit display-manager.service failed to load: No such file or directory. |
| [ 17.217333] systemd[1]: Expecting device dev-ttyS0.device... |
| [ 17.232814] systemd[1]: Starting Forward Password Requests to Wall Directory Watch. |
| [ 17.240794] systemd[1]: Started Forward Password Requests to Wall Directory Watch. |
| [ 17.248523] systemd[1]: Starting Remote File Systems (Pre). |
| [ 17.264721] systemd[1]: Reached target Remote File Systems (Pre). |
| [ 17.270955] systemd[1]: Starting Encrypted Volumes. |
| [ 17.284691] systemd[1]: Reached target Encrypted Volumes. |
| [ 17.290235] systemd[1]: Starting Dispatch Password Requests to Console Directory Watch. |
| [ 17.298418] systemd[1]: Started Dispatch Password Requests to Console Directory Watch. |
| [ 17.306454] systemd[1]: Starting Paths. |
| [ 17.320772] systemd[1]: Reached target Paths. |
| [ 17.325366] systemd[1]: Starting Arbitrary Executable File Formats File System Automount Point. |
| [ 17.348686] systemd[1]: Set up automount Arbitrary Executable File Formats File System Automount Point. |
| [ 17.358258] systemd[1]: Starting Swap. |
| [ 17.372668] systemd[1]: Reached target Swap. |
| [ 17.377074] systemd[1]: Starting Root Slice. |
| [ 17.388748] systemd[1]: Created slice Root Slice. |
| [ 17.393643] systemd[1]: Starting User and Session Slice. |
| [ 17.408654] systemd[1]: Created slice User and Session Slice. |
| [ 17.414533] systemd[1]: Starting Delayed Shutdown Socket. |
| [ 17.428654] systemd[1]: Listening on Delayed Shutdown Socket. |
| [ 17.434549] systemd[1]: Starting /dev/initctl Compatibility Named Pipe. |
| [ 17.452642] systemd[1]: Listening on /dev/initctl Compatibility Named Pipe. |
| [ 17.459744] systemd[1]: Starting Journal Socket (/dev/log). |
| [ 17.484625] systemd[1]: Listening on Journal Socket (/dev/log). |
| [ 17.490712] systemd[1]: Starting udev Kernel Socket. |
| [ 17.504614] systemd[1]: Listening on udev Kernel Socket. |
| [ 17.511121] systemd[1]: Starting udev Control Socket. |
| [ 17.524606] systemd[1]: Listening on udev Control Socket. |
| [ 17.530123] systemd[1]: Starting Journal Socket. |
| [ 17.544599] systemd[1]: Listening on Journal Socket. |
| [ 17.549719] systemd[1]: Starting System Slice. |
| [ 17.564606] systemd[1]: Created slice System Slice. |
| [ 17.569656] systemd[1]: Starting system-getty.slice. |
| [ 17.584599] systemd[1]: Created slice system-getty.slice. |
| [ 17.590148] systemd[1]: Starting system-serial\x2dgetty.slice. |
| [ 17.604589] systemd[1]: Created slice system-serial\x2dgetty.slice. |
| [ 17.611033] systemd[1]: Starting Increase datagram queue length... |
| [ 17.629477] systemd[1]: Mounting Debug File System... |
| [ 17.645537] systemd[1]: Mounting POSIX Message Queue File System... |
| [ 17.736686] systemd[1]: Starting Load Kernel Modules... |
| [ 18.155550] systemd[1]: Started Set Up Additional Binary Formats. |
| [ 18.177520] systemd[1]: Starting Create list of required static device nodes for the current kernel... |
| [ 18.201848] systemd[1]: Starting udev Coldplug all Devices... |
| [ 18.217832] systemd[1]: Mounting Huge Pages File System... |
| [ 18.233739] systemd[1]: Starting Slices. |
| [ 18.248431] systemd[1]: Reached target Slices. |
| [ 18.253170] systemd[1]: Starting Remount Root and Kernel File Systems... |
| [ 19.448011] systemd[1]: Started Increase datagram queue length. |
| [ 19.454860] systemd[1]: Starting Syslog Socket. |
| [ 19.468006] systemd[1]: Listening on Syslog Socket. |
| [ 19.473057] systemd[1]: Starting Sockets. |
| [ 19.488008] systemd[1]: Reached target Sockets. |
| [ 19.492728] systemd[1]: Starting Journal Service... |
| [ 19.520008] systemd[1]: Started Journal Service. |
| [ 23.959189] systemd-udevd[188]: starting version 215 |
| [ 23.989972] systemd-journald[171]: Received request to flush runtime journal from PID 1 |
| [ 37.879262] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4 |
| [ 38.450642] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input2 |
| [ 38.459178] ACPI: Power Button [PWRB] |
| [ 38.463022] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input3 |
| [ 38.470541] ACPI: Power Button [PWRF] |
| [ 38.656581] k10temp 0000:00:18.3: unreliable CPU thermal sensor; monitoring disabled |
| [ 38.664559] k10temp 0000:00:19.3: unreliable CPU thermal sensor; monitoring disabled |
| [ 39.178786] SCSI subsystem initialized |
| [ 39.271059] i2c i2c-0: nForce2 SMBus adapter at 0x2c80 |
| [ 39.276382] i2c i2c-1: nForce2 SMBus adapter at 0x2cc0 |
| [ 39.384977] FDC 0 is a post-1991 82077 |
| [ 39.406738] acpi-cpufreq: overriding BIOS provided _PSD data |
| [ 39.633746] EDAC MC: Ver: 3.0.0 |
| [ 40.025407] libata version 3.00 loaded. |
| [ 40.102711] MCE: In-kernel MCE decoding enabled. |
| [ 40.122794] input: PC Speaker as /devices/platform/pcspkr/input/input4 |
| [ 40.472028] sata_nv 0000:00:07.0: version 3.5 |
| [ 40.472403] ACPI: PCI Interrupt Link [LSA0] enabled at IRQ 21 |
| [ 40.479071] scsi0 : sata_nv |
| [ 40.482303] scsi1 : sata_nv |
| [ 40.485337] ata1: SATA max UDMA/133 cmd 0x3050 ctl 0x3070 bmdma 0x3030 irq 21 |
| [ 40.492612] ata2: SATA max UDMA/133 cmd 0x3058 ctl 0x3074 bmdma 0x3038 irq 21 |
| [ 40.500041] ACPI: PCI Interrupt Link [LSA1] enabled at IRQ 20 |
| [ 40.506335] scsi2 : sata_nv |
| [ 40.509418] scsi3 : sata_nv |
| [ 40.512375] ata3: SATA max UDMA/133 cmd 0x3060 ctl 0x3078 bmdma 0x3040 irq 20 |
| [ 40.519593] ata4: SATA max UDMA/133 cmd 0x3068 ctl 0x307c bmdma 0x3048 irq 20 |
| [ 40.808535] ata1: SATA link down (SStatus 0 SControl 300) |
| [ 40.836535] ata3: SATA link down (SStatus 0 SControl 300) |
| [ 40.940084] pata_amd 0000:00:06.0: version 0.4.1 |
| [ 40.941135] scsi4 : pata_amd |
| [ 40.944346] scsi5 : pata_amd |
| [ 40.947436] ata5: PATA max UDMA/133 cmd 0x1f0 ctl 0x3f6 bmdma 0x3020 irq 14 |
| [ 40.954515] ata6: PATA max UDMA/133 cmd 0x170 ctl 0x376 bmdma 0x3028 irq 15 |
| [ 41.111011] AMD64 EDAC driver v3.4.0 |
| [ 41.114820] EDAC amd64: DRAM ECC enabled. |
| [ 41.118952] EDAC amd64: F10h detected (node 0). |
| [ 41.123621] EDAC MC: DCT0 chip selects: |
| [ 41.123624] EDAC amd64: MC: 0: 0MB 1: 0MB |
| [ 41.128419] EDAC amd64: MC: 2: 0MB 3: 0MB |
| [ 41.128439] ata2: SATA link down (SStatus 0 SControl 300) |
| [ 41.138668] EDAC amd64: MC: 4: 0MB 5: 0MB |
| [ 41.143455] EDAC amd64: MC: 6: 1024MB 7: 1024MB |
| [ 41.148245] EDAC MC: DCT1 chip selects: |
| [ 41.148248] EDAC amd64: MC: 0: 0MB 1: 0MB |
| [ 41.153042] EDAC amd64: MC: 2: 0MB 3: 0MB |
| [ 41.157828] EDAC amd64: MC: 4: 0MB 5: 0MB |
| [ 41.162637] EDAC amd64: MC: 6: 1024MB 7: 1024MB |
| [ 41.167427] EDAC amd64: using x4 syndromes. |
| [ 41.171696] EDAC amd64: MCT channel count: 2 |
| [ 41.176128] EDAC amd64: CS6: Registered DDR2 RAM |
| [ 41.180873] EDAC amd64: CS7: Registered DDR2 RAM |
| [ 41.186048] EDAC MC0: Giving out device to module amd64_edac controller F10h: DEV 0000:00:18.2 (INTERRUPT) |
| [ 41.195940] EDAC amd64: DRAM ECC enabled. |
| [ 41.200129] EDAC amd64: F10h detected (node 1). |
| [ 41.204841] EDAC MC: DCT0 chip selects: |
| [ 41.204845] EDAC amd64: MC: 0: 1024MB 1: 0MB |
| [ 41.209687] EDAC amd64: MC: 2: 0MB 3: 0MB |
| [ 41.214523] EDAC amd64: MC: 4: 0MB 5: 0MB |
| [ 41.219365] EDAC amd64: MC: 6: 0MB 7: 0MB |
| [ 41.224182] EDAC MC: DCT1 chip selects: |
| [ 41.224186] EDAC amd64: MC: 0: 0MB 1: 0MB |
| [ 41.228969] EDAC amd64: MC: 2: 0MB 3: 0MB |
| [ 41.233750] EDAC amd64: MC: 4: 0MB 5: 0MB |
| [ 41.238541] EDAC amd64: MC: 6: 0MB 7: 0MB |
| [ 41.243333] EDAC amd64: using x4 syndromes. |
| [ 41.247595] EDAC amd64: MCT channel count: 1 |
| [ 41.252018] EDAC amd64: CS0: Registered DDR2 RAM |
| [ 41.257007] EDAC MC1: Giving out device to module amd64_edac controller F10h: DEV 0000:00:19.2 (INTERRUPT) |
| [ 41.266942] EDAC PCI0: Giving out device to module amd64_edac controller EDAC PCI controller: DEV 0000:00:18.2 (POLLED) |
| [ 41.286576] kvm: Nested Virtualization enabled |
| [ 41.291180] kvm: Nested Paging enabled |
| [ 41.440329] ata4: SATA link down (SStatus 0 SControl 300) |
| [ 84.730123] *****RAPTOR ENGINEERING AUTOMATED TEST BOOT SUCCESS***** |
| [ 300.767078] [Hardware Error]: Corrected error, no action required. |
| [ 300.773382] [Hardware Error]: CPU:4 (10:2:1) MC4_STATUS[Over|CE|MiscV|-|AddrV|CECC]: 0xdc224100da080a13 |
| [ 300.783007] [Hardware Error]: MC4_ADDR: 0x000000017ddd1480 |
| [ 300.788565] [Hardware Error]: MC4 Error (node 1): DRAM ECC error detected on the NB. |
| [ 300.796481] EDAC MC1: 1 CE on mc#1csrow#0channel#0 (csrow:0 channel:0 page:0x17ddd1 offset:0x480 grain:0 syndrome:0xda44) |
| [ 300.807510] [Hardware Error]: cache level: L3/GEN, mem/io: MEM, mem-tx: RD, part-proc: RES (no timeout) |
| [ 373.435449] nfs: server 10.100.1.1 not responding, still trying |
| [ 373.441561] nfs: server 10.100.1.1 not responding, still trying |
| [ 373.447596] nfs: server 10.100.1.1 not responding, still trying |
| [ 373.456294] nfs: server 10.100.1.1 OK |
| [ 373.500192] nfs: server 10.100.1.1 OK |
| [ 373.554466] nfs: server 10.100.1.1 OK |