blob: da165778f5fc57ac2d392e394acd8f8b3a7fbf86 [file] [log] [blame]
[ 0.000000] pcpu-alloc: s87064 r8192 d31720 u524288 alloc=1*2097152
[ 0.000000] pcpu-alloc: [0] 0 1 2 3
[ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 1029502
[ 0.000000] Kernel command line: root=LABEL=VOYAGE_FS console=ttyS0,115200n8
[ 0.000000] log_buf_len individual max cpu contribution: 4096 bytes
[ 0.000000] log_buf_len total cpu_extra contributions: 12288 bytes
[ 0.000000] log_buf_len min size: 16384 bytes
[ 0.000000] log_buf_len: 32768 bytes
[ 0.000000] early log buf free: 7924(48%)
[ 0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes)
[ 0.000000] Dentry cache hash table entries: 524288 (order: 10, 4194304 bytes)
[ 0.000000] Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes)
[ 0.000000] xsave: enabled xstate_bv 0x7, cntxt size 0x340 using standard form
[ 0.000000] AGP: Checking aperture...
[ 0.000000] AGP: No AGP bridge found
[ 0.000000] AGP: Node 0: aperture [bus addr 0x00000000-0x01ffffff] (32MB)
[ 0.000000] AGP: Your BIOS doesn't leave a aperture memory hole
[ 0.000000] AGP: Please enable the IOMMU option in the BIOS setup
[ 0.000000] AGP: This costs you 64MB of RAM
[ 0.000000] AGP: Mapping aperture over RAM [mem 0xc4000000-0xc7ffffff] (65536KB)
[ 0.000000] PM: Registered nosave memory: [mem 0xc4000000-0xc7ffffff]
[ 0.000000] Memory: 3964712K/4175180K available (3897K kernel code, 368K rwdata, 1376K rodata, 840K init, 392K bss, 210468K reserved, 0K cma-reserved)
[ 0.000000] Hierarchical RCU implementation.
[ 0.000000] CONFIG_RCU_FANOUT set to non-default value of 32
[ 0.000000] RCU restricting CPUs from NR_CPUS=8 to nr_cpu_ids=4.
[ 0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=4
[ 0.000000] NR_IRQS:4352 nr_irqs:1000 16
[ 0.000000] Console: colour dummy device 80x25
[ 0.000000] console [ttyS0] enabled
[ 0.000000] clocksource hpet: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 133484873504 ns
[ 0.000000] hpet clockevent registered
[ 0.000000] tsc: Fast TSC calibration using PIT
[ 0.000000] tsc: Detected 998.072 MHz processor
[ 0.000024] Calibrating delay loop (skipped), value calculated using timer frequency.. 1996.14 BogoMIPS (lpj=998072)
[ 0.010656] pid_max: default: 32768 minimum: 301
[ 0.015345] ACPI: Core revision 20150410
[ 0.039866] ACPI: All ACPI Tables successfully acquired
[ 0.045333] Mount-cache hash table entries: 8192 (order: 4, 65536 bytes)
[ 0.052053] Mountpoint-cache hash table entries: 8192 (order: 4, 65536 bytes)
[ 0.060009] CPU: Physical Processor ID: 0
[ 0.064066] CPU: Processor Core ID: 0
[ 0.067747] Last level iTLB entries: 4KB 512, 2MB 8, 4MB 4
[ 0.073288] Last level dTLB entries: 4KB 512, 2MB 256, 4MB 128, 1GB 0
[ 0.080382] Freeing SMP alternatives memory: 20K (ffffffff81730000 - ffffffff81735000)
[ 0.089140] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=0 pin2=0
[ 0.206261] smpboot: CPU0: AMD GX-412TC SOC (fam: 16, model: 30, stepping: 01)
[ 0.213658] Performance Events: AMD PMU driver.
[ 0.218269] ... version: 0
[ 0.222316] ... bit width: 48
[ 0.226420] ... generic registers: 4
[ 0.230465] ... value mask: 0000ffffffffffff
[ 0.235787] ... max period: 00007fffffffffff
[ 0.241103] ... fixed-purpose events: 0
[ 0.245131] ... event mask: 000000000000000f
[ 0.251539] x86: Booting SMP configuration:
[ 0.255766] .... node #0, CPUs: #1 #2 #3
[ 0.301075] x86: Booted up 1 node, 4 CPUs
[ 0.305317] smpboot: Total of 4 processors activated (7984.57 BogoMIPS)
[ 0.313961] devtmpfs: initialized
[ 0.318422] clocksource jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 1911260446275000 ns
[ 0.328809] NET: Registered protocol family 16
[ 0.339284] cpuidle: using governor ladder
[ 0.351340] cpuidle: using governor menu
[ 0.355492] ACPI: bus type PCI registered
[ 0.359543] PCI: Using configuration type 1 for base access
[ 0.365123] PCI: Using configuration type 1 for extended access
[ 0.377182] ACPI: Added _OSI(Module Device)
[ 0.381394] ACPI: Added _OSI(Processor Device)
[ 0.385863] ACPI: Added _OSI(3.0 _SCP Extensions)
[ 0.390600] ACPI: Added _OSI(Processor Aggregator Device)
[ 0.401810] ACPI: Executed 2 blocks of module-level executable AML code
[ 0.422701] ACPI: Interpreter enabled
[ 0.426424] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S2_] (20150410/hwxface-580)
[ 0.435723] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S3_] (20150410/hwxface-580)
[ 0.445079] ACPI: (supports S0 S1 S4 S5)
[ 0.449016] ACPI: Using IOAPIC for interrupt routing
[ 0.454084] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
[ 0.475856] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
[ 0.482070] acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig Segments MSI]
[ 0.489276] acpi PNP0A08:00: _OSC: not requesting OS control; OS requires [ExtendedConfig ASPM ClockPM MSI]
[ 0.499180] acpi PNP0A08:00: host bridge window expanded to [io 0x0000-0x0cf7 window]; [io 0x03b0-0x03df window] ignored
[ 0.510649] PCI host bridge to bus 0000:00
[ 0.514767] pci_bus 0000:00: root bus resource [bus 00-ff]
[ 0.520265] pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7 window]
[ 0.527074] pci_bus 0000:00: root bus resource [io 0x0d00-0xffff window]
[ 0.533881] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff]
[ 0.540761] pci_bus 0000:00: root bus resource [mem 0x000c0000-0x000dffff]
[ 0.547643] pci_bus 0000:00: root bus resource [mem 0xd0000000-0xffffffff]
[ 0.554545] pci 0000:00:00.0: [1022:1566] type 00 class 0x060000
[ 0.554985] pci 0000:00:02.0: [1022:156b] type 00 class 0x060000
[ 0.555428] pci 0000:00:02.2: [1022:1439] type 01 class 0x060400
[ 0.555596] pci 0000:00:02.2: PME# supported from D0 D3hot D3cold
[ 0.555801] pci 0000:00:02.2: System wakeup disabled by ACPI
[ 0.561761] pci 0000:00:02.3: [1022:1439] type 01 class 0x060400
[ 0.561926] pci 0000:00:02.3: PME# supported from D0 D3hot D3cold
[ 0.562076] pci 0000:00:02.3: System wakeup disabled by ACPI
[ 0.567945] pci 0000:00:02.4: [1022:1439] type 01 class 0x060400
[ 0.568061] pci 0000:00:02.4: PME# supported from D0 D3hot D3cold
[ 0.568236] pci 0000:00:02.4: System wakeup disabled by ACPI
[ 0.574192] pci 0000:00:08.0: [1022:1537] type 00 class 0x108000
[ 0.574221] pci 0000:00:08.0: reg 0x10: [mem 0xf7f00000-0xf7f1ffff 64bit pref]
[ 0.574267] pci 0000:00:08.0: reg 0x18: [mem 0xf7d00000-0xf7dfffff]
[ 0.574281] pci 0000:00:08.0: reg 0x1c: [mem 0xf7f24000-0xf7f24fff]
[ 0.574295] pci 0000:00:08.0: reg 0x20: [mem 0xf7e00000-0xf7efffff]
[ 0.574309] pci 0000:00:08.0: reg 0x24: [mem 0xf7f20000-0xf7f21fff]
[ 0.574720] pci 0000:00:10.0: [1022:7814] type 00 class 0x0c0330
[ 0.574755] pci 0000:00:10.0: reg 0x10: [mem 0xf7f22000-0xf7f23fff 64bit]
[ 0.574885] pci 0000:00:10.0: PME# supported from D0 D3hot D3cold
[ 0.575036] pci 0000:00:10.0: System wakeup disabled by ACPI
[ 0.580877] pci 0000:00:11.0: [1022:7800] type 00 class 0x01018f
[ 0.580935] pci 0000:00:11.0: reg 0x10: [io 0x4010-0x4017]
[ 0.580952] pci 0000:00:11.0: reg 0x14: [io 0x4020-0x4023]
[ 0.580968] pci 0000:00:11.0: reg 0x18: [io 0x4018-0x401f]
[ 0.580984] pci 0000:00:11.0: reg 0x1c: [io 0x4024-0x4027]
[ 0.581008] pci 0000:00:11.0: reg 0x20: [io 0x4000-0x400f]
[ 0.581025] pci 0000:00:11.0: reg 0x24: [mem 0xf7f25000-0xf7f253ff]
[ 0.581124] pci 0000:00:11.0: set SATA to AHCI mode
[ 0.586084] pci 0000:00:11.0: PME# supported from D3hot
[ 0.586474] pci 0000:00:13.0: [1022:7808] type 00 class 0x0c0320
[ 0.586502] pci 0000:00:13.0: reg 0x10: [mem 0xf7f26000-0xf7f260ff]
[ 0.586607] pci 0000:00:13.0: supports D1 D2
[ 0.586644] pci 0000:00:13.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.586843] pci 0000:00:13.0: System wakeup disabled by ACPI
[ 0.592826] pci 0000:00:14.0: [1022:780b] type 00 class 0x0c0500
[ 0.593253] pci 0000:00:14.3: [1022:780e] type 00 class 0x060100
[ 0.593649] pci 0000:00:14.7: [1022:7813] type 00 class 0x080501
[ 0.593706] pci 0000:00:14.7: reg 0x10: [mem 0xf7f27000-0xf7f270ff 64bit]
[ 0.594110] pci 0000:00:18.0: [1022:1580] type 00 class 0x060000
[ 0.594464] pci 0000:00:18.1: [1022:1581] type 00 class 0x060000
[ 0.594748] pci 0000:00:18.2: [1022:1582] type 00 class 0x060000
[ 0.595043] pci 0000:00:18.3: [1022:1583] type 00 class 0x060000
[ 0.595367] pci 0000:00:18.4: [1022:1584] type 00 class 0x060000
[ 0.595657] pci 0000:00:18.5: [1022:1585] type 00 class 0x060000
[ 0.596273] pci 0000:01:00.0: [8086:157b] type 00 class 0x020000
[ 0.596339] pci 0000:01:00.0: reg 0x10: [mem 0xf7a00000-0xf7a1ffff]
[ 0.596376] pci 0000:01:00.0: reg 0x18: [io 0x1000-0x101f]
[ 0.596399] pci 0000:01:00.0: reg 0x1c: [mem 0xf7a20000-0xf7a23fff]
[ 0.596645] pci 0000:01:00.0: PME# supported from D0 D3hot D3cold
[ 0.596919] pci 0000:00:02.2: PCI bridge to [bus 01]
[ 0.601936] pci 0000:00:02.2: bridge window [io 0x1000-0x1fff]
[ 0.601946] pci 0000:00:02.2: bridge window [mem 0xf7a00000-0xf7afffff]
[ 0.602133] pci 0000:02:00.0: [8086:157b] type 00 class 0x020000
[ 0.602201] pci 0000:02:00.0: reg 0x10: [mem 0xf7b00000-0xf7b1ffff]
[ 0.602238] pci 0000:02:00.0: reg 0x18: [io 0x2000-0x201f]
[ 0.602289] pci 0000:02:00.0: reg 0x1c: [mem 0xf7b20000-0xf7b23fff]
[ 0.602476] pci 0000:02:00.0: PME# supported from D0 D3hot D3cold
[ 0.602654] pci 0000:00:02.3: PCI bridge to [bus 02]
[ 0.607639] pci 0000:00:02.3: bridge window [io 0x2000-0x2fff]
[ 0.607648] pci 0000:00:02.3: bridge window [mem 0xf7b00000-0xf7bfffff]
[ 0.607885] pci 0000:03:00.0: [8086:157b] type 00 class 0x020000
[ 0.607950] pci 0000:03:00.0: reg 0x10: [mem 0xf7c00000-0xf7c1ffff]
[ 0.607995] pci 0000:03:00.0: reg 0x18: [io 0x3000-0x301f]
[ 0.608047] pci 0000:03:00.0: reg 0x1c: [mem 0xf7c20000-0xf7c23fff]
[ 0.608266] pci 0000:03:00.0: PME# supported from D0 D3hot D3cold
[ 0.608507] pci 0000:00:02.4: PCI bridge to [bus 03]
[ 0.613488] pci 0000:00:02.4: bridge window [io 0x3000-0x3fff]
[ 0.613497] pci 0000:00:02.4: bridge window [mem 0xf7c00000-0xf7cfffff]
[ 0.613642] pci_bus 0000:00: on NUMA node 0
[ 0.614489] ACPI: PCI Interrupt Link [INTA] (IRQs *3 4 5 7 10 11 12 15)
[ 0.621667] ACPI: PCI Interrupt Link [INTB] (IRQs *3 4 5 7 10 11 12 15)
[ 0.628843] ACPI: PCI Interrupt Link [INTC] (IRQs 3 4 *5 7 10 11 12 15)
[ 0.635952] ACPI: PCI Interrupt Link [INTD] (IRQs 3 4 5 *7 10 11 12 15)
[ 0.643182] ACPI: PCI Interrupt Link [INTE] (IRQs 3 4 5 7 10 *11 12 15)
[ 0.650284] ACPI: PCI Interrupt Link [INTF] (IRQs 9) *10
[ 0.655916] ACPI: PCI Interrupt Link [INTG] (IRQs 3 4 5 7 10 11 12 15) *0
[ 0.663287] ACPI: PCI Interrupt Link [INTH] (IRQs 3 4 5 7 10 11 12 15) *0
[ 0.670961] ACPI: Enabled 4 GPEs in block 00 to 1F
[ 0.676193] vgaarb: loaded
[ 0.679381] SCSI subsystem initialized
[ 0.683482] PCI: Using ACPI for IRQ routing
[ 0.687710] PCI: pci_cache_line_size set to 64 bytes
[ 0.687797] e820: reserve RAM buffer [mem 0x0009fc00-0x0009ffff]
[ 0.687805] e820: reserve RAM buffer [mem 0xcfdb5000-0xcfffffff]
[ 0.687810] e820: reserve RAM buffer [mem 0x12f000000-0x12fffffff]
[ 0.688808] Switched to clocksource hpet
[ 0.693188] pnp: PnP ACPI init
[ 0.696934] system 00:00: [mem 0xfec10002-0xfec11001] has been reserved
[ 0.703574] system 00:00: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.703775] pnp 00:01: Plug and Play ACPI device, IDs PNP0b00 (active)
[ 0.704480] pnp: PnP ACPI: found 2 devices
[ 0.723799] clocksource acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns
[ 0.732692] pci 0000:00:02.2: PCI bridge to [bus 01]
[ 0.737678] pci 0000:00:02.2: bridge window [io 0x1000-0x1fff]
[ 0.743798] pci 0000:00:02.2: bridge window [mem 0xf7a00000-0xf7afffff]
[ 0.750641] pci 0000:00:02.3: PCI bridge to [bus 02]
[ 0.755651] pci 0000:00:02.3: bridge window [io 0x2000-0x2fff]
[ 0.761760] pci 0000:00:02.3: bridge window [mem 0xf7b00000-0xf7bfffff]
[ 0.768572] pci 0000:00:02.4: PCI bridge to [bus 03]
[ 0.773574] pci 0000:00:02.4: bridge window [io 0x3000-0x3fff]
[ 0.779714] pci 0000:00:02.4: bridge window [mem 0xf7c00000-0xf7cfffff]
[ 0.786551] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7 window]
[ 0.786559] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff window]
[ 0.786584] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff]
[ 0.786605] pci_bus 0000:00: resource 7 [mem 0x000c0000-0x000dffff]
[ 0.786612] pci_bus 0000:00: resource 8 [mem 0xd0000000-0xffffffff]
[ 0.786621] pci_bus 0000:01: resource 0 [io 0x1000-0x1fff]
[ 0.786657] pci_bus 0000:01: resource 1 [mem 0xf7a00000-0xf7afffff]
[ 0.786664] pci_bus 0000:02: resource 0 [io 0x2000-0x2fff]
[ 0.786671] pci_bus 0000:02: resource 1 [mem 0xf7b00000-0xf7bfffff]
[ 0.786708] pci_bus 0000:03: resource 0 [io 0x3000-0x3fff]
[ 0.786715] pci_bus 0000:03: resource 1 [mem 0xf7c00000-0xf7cfffff]
[ 0.786875] NET: Registered protocol family 2
[ 0.792000] TCP established hash table entries: 32768 (order: 6, 262144 bytes)
[ 0.799468] TCP bind hash table entries: 32768 (order: 7, 524288 bytes)
[ 0.806484] TCP: Hash tables configured (established 32768 bind 32768)
[ 0.813173] UDP hash table entries: 2048 (order: 4, 65536 bytes)
[ 0.819268] UDP-Lite hash table entries: 2048 (order: 4, 65536 bytes)
[ 0.826048] NET: Registered protocol family 1
[ 0.830906] RPC: Registered named UNIX socket transport module.
[ 0.836846] RPC: Registered udp transport module.
[ 0.841593] RPC: Registered tcp transport module.
[ 0.846345] RPC: Registered tcp NFSv4.1 backchannel transport module.
[ 0.860288] PCI: CLS 64 bytes, default 64
[ 0.860573] Trying to unpack rootfs image as initramfs...
[ 4.115738] Freeing initrd memory: 4840K (ffff880037b36000 - ffff880037ff0000)
[ 4.123055] PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
[ 4.129543] software IO TLB [mem 0xcbdb5000-0xcfdb5000] (64MB) mapped at [ffff8800cbdb5000-ffff8800cfdb4fff]
[ 4.139538] perf: AMD NB counters detected
[ 4.143656] perf: AMD L2I counters detected
[ 4.148367] microcode: CPU0: patch_level=0x07030105
[ 4.153291] microcode: CPU1: patch_level=0x07030105
[ 4.158230] microcode: CPU2: patch_level=0x07030105
[ 4.163158] microcode: CPU3: patch_level=0x07030105
[ 4.168297] microcode: Microcode Update Driver: v2.00 <tigran@aivazian.fsnet.co.uk>, Peter Oruba
[ 4.177197] LVT offset 0 assigned for vector 0x400
[ 4.182076] perf: AMD IBS detected (0x000000ff)
[ 4.189514] futex hash table entries: 1024 (order: 4, 65536 bytes)
[ 4.198194] NFS: Registering the id_resolver key type
[ 4.203285] Key type id_resolver registered
[ 4.207588] Key type id_legacy registered
[ 4.213124] bounce: pool size: 64 pages
[ 4.217039] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252)
[ 4.224503] io scheduler noop registered
[ 4.228472] io scheduler deadline registered
[ 4.232857] io scheduler cfq registered (default)
[ 4.239486] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input0
[ 4.247857] ACPI: Power Button [PWRB]
[ 4.251811] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input1
[ 4.259223] ACPI: Power Button [PWRF]
[ 4.263244] ACPI: acpi_idle registered with cpuidle
[ 4.334957] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
[ 4.362277] serial8250: ttyS0 at I/O 0x3f8 (irq = 4, base_baud = 115200) is a 16550A
[ 4.391346] serial8250: ttyS1 at I/O 0x2f8 (irq = 3, base_baud = 115200) is a 16550A
[ 4.400166] Linux agpgart interface v0.103
[ 4.414420] brd: module loaded
[ 4.417860] i8042: PNP: No PS/2 controller found. Probing ports directly.
[ 5.500187] i8042: No controller found
[ 5.500233] tsc: Refined TSC clocksource calibration: 998.128 MHz
[ 5.500239] clocksource tsc: mask: 0xffffffffffffffff max_cycles: 0x1cc65d64e77, max_idle_ns: 881590512558 ns
[ 5.520383] mousedev: PS/2 mouse device common for all mice
[ 5.526467] rtc_cmos 00:01: RTC can wake from S4
[ 5.531566] rtc_cmos 00:01: rtc core: registered rtc_cmos as rtc0
[ 5.537749] rtc_cmos 00:01: alarms up to one day, 114 bytes nvram, hpet irqs
[ 5.544891] Loading driver leds-apu (v0.1).
[ 5.549129] ledtrig-cpu: registered to indicate activity on CPUs
[ 5.555257] hidraw: raw HID events driver (C) Jiri Kosina
[ 5.560955] NET: Registered protocol family 17
[ 5.565507] Key type dns_resolver registered
[ 5.571611] rtc_cmos 00:01: setting system clock to 2017-09-05 02:03:45 UTC (1504577025)
[ 5.581299] Freeing unused kernel memory: 840K (ffffffff8165e000 - ffffffff81730000)
[ 5.589399] Write protecting the kernel read-only data: 6144k
[ 5.596032] Freeing unused kernel memory: 188K (ffff8800013d1000 - ffff880001400000)
[ 5.604854] Freeing unused kernel memory: 672K (ffff880001558000 - ffff880001600000)
[ 5.649671] systemd-udevd[1029]: starting version 215
[ 5.656427] random: systemd-udevd urandom read with 7 bits of entropy available
[ 5.724444] pps_core: LinuxPPS API ver. 1 registered
[ 5.729826] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it>
[ 5.730195] sdhci: Secure Digital Host Controller Interface driver
[ 5.730197] sdhci: Copyright(c) Pierre Ossman
[ 5.730966] sdhci-pci 0000:00:14.7: SDHCI controller found [1022:7813] (rev 1)
[ 5.731390] sdhci-pci 0000:00:14.7: No vmmc regulator found
[ 5.731420] sdhci-pci 0000:00:14.7: No vqmmc regulator found
[ 5.733372] ACPI: bus type USB registered
[ 5.733517] usbcore: registered new interface driver usbfs
[ 5.733557] usbcore: registered new interface driver hub
[ 5.733707] usbcore: registered new device driver usb
[ 5.734576] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 5.734946] ehci-pci: EHCI PCI platform driver
[ 5.735078] libata version 3.00 loaded.
[ 5.738262] mmc0: SDHCI controller on PCI [0000:00:14.7] using ADMA 64-bit
[ 5.738752] ehci-pci 0000:00:13.0: EHCI Host Controller
[ 5.738799] ehci-pci 0000:00:13.0: new USB bus registered, assigned bus number 1
[ 5.738812] ehci-pci 0000:00:13.0: applying AMD SB700/SB800/Hudson-2/3 EHCI dummy qh workaround
[ 5.738857] ehci-pci 0000:00:13.0: debug port 2
[ 5.738978] ehci-pci 0000:00:13.0: irq 18, io mem 0xf7f26000
[ 5.744204] ehci-pci 0000:00:13.0: USB 2.0 started, EHCI 1.00
[ 5.744482] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
[ 5.744515] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 5.744519] usb usb1: Product: EHCI Host Controller
[ 5.744524] usb usb1: Manufacturer: Linux 4.1.6-voyage ehci_hcd
[ 5.744527] usb usb1: SerialNumber: 0000:00:13.0
[ 5.745368] hub 1-0:1.0: USB hub found
[ 5.745421] hub 1-0:1.0: 2 ports detected
[ 5.746323] ahci 0000:00:11.0: version 3.0
[ 5.746979] ahci 0000:00:11.0: AHCI 0001.0300 32 slots 2 ports 6 Gbps 0x3 impl SATA mode
[ 5.746988] ahci 0000:00:11.0: flags: 64bit ncq sntf ilck pm led clo pmp fbs pio slum part ccc
[ 5.748504] scsi host0: ahci
[ 5.749975] scsi host1: ahci
[ 5.750287] ata1: SATA max UDMA/133 abar m1024@0xf7f25000 port 0xf7f25100 irq 27
[ 5.750293] ata2: SATA max UDMA/133 abar m1024@0xf7f25000 port 0xf7f25180 irq 27
[ 5.750693] xhci_hcd 0000:00:10.0: xHCI Host Controller
[ 5.750715] xhci_hcd 0000:00:10.0: new USB bus registered, assigned bus number 2
[ 5.751041] xhci_hcd 0000:00:10.0: hcc params 0x014040c3 hci version 0x100 quirks 0x00000410
[ 5.751619] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002
[ 5.751625] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 5.751629] usb usb2: Product: xHCI Host Controller
[ 5.751633] usb usb2: Manufacturer: Linux 4.1.6-voyage xhci-hcd
[ 5.751637] usb usb2: SerialNumber: 0000:00:10.0
[ 5.752302] hub 2-0:1.0: USB hub found
[ 5.752356] hub 2-0:1.0: 2 ports detected
[ 5.752795] xhci_hcd 0000:00:10.0: xHCI Host Controller
[ 5.752805] xhci_hcd 0000:00:10.0: new USB bus registered, assigned bus number 3
[ 5.754344] usb usb3: We don't know the algorithms for LPM for this host, disabling LPM.
[ 5.754409] usb usb3: New USB device found, idVendor=1d6b, idProduct=0003
[ 5.754414] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 5.754418] usb usb3: Product: xHCI Host Controller
[ 5.754422] usb usb3: Manufacturer: Linux 4.1.6-voyage xhci-hcd
[ 5.754426] usb usb3: SerialNumber: 0000:00:10.0
[ 5.755005] hub 3-0:1.0: USB hub found
[ 5.755028] hub 3-0:1.0: 2 ports detected
[ 6.047227] usb 1-1: new high-speed USB device number 2 using ehci-pci
[ 6.054255] usb 2-2: new high-speed USB device number 2 using xhci_hcd
[ 6.055279] ata2: SATA link down (SStatus 0 SControl 300)
[ 6.058268] ata1: SATA link down (SStatus 0 SControl 300)
[ 6.080424] PTP clock support registered
[ 6.087258] igb: Intel(R) Gigabit Ethernet Network Driver - version 5.2.15-k
[ 6.094626] igb: Copyright (c) 2007-2014 Intel Corporation.
[ 6.133257] pps pps0: new PPS source ptp0
[ 6.137407] igb 0000:01:00.0: added PHC on eth0
[ 6.142155] igb 0000:01:00.0: Intel(R) Gigabit Ethernet Network Connection
[ 6.149270] igb 0000:01:00.0: eth0: (PCIe:2.5Gb/s:Width x1) 00:0d:b9:43:3f:bc
[ 6.156811] igb 0000:01:00.0: eth0: PBA No: FFFFFF-0FF
[ 6.162081] igb 0000:01:00.0: Using MSI-X interrupts. 4 rx queue(s), 4 tx queue(s)
[ 6.165181] usb 1-1: New USB device found, idVendor=0438, idProduct=7900
[ 6.165187] usb 1-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[ 6.166547] hub 1-1:1.0: USB hub found
[ 6.166620] hub 1-1:1.0: 4 ports detected
[ 6.208920] usb 2-2: New USB device found, idVendor=0951, idProduct=1665
[ 6.215978] usb 2-2: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[ 6.223535] usb 2-2: Product: DataTraveler 2.0
[ 6.226488] pps pps1: new PPS source ptp1
[ 6.226494] igb 0000:02:00.0: added PHC on eth1
[ 6.226498] igb 0000:02:00.0: Intel(R) Gigabit Ethernet Network Connection
[ 6.226503] igb 0000:02:00.0: eth1: (PCIe:2.5Gb/s:Width x1) 00:0d:b9:43:3f:bd
[ 6.226507] igb 0000:02:00.0: eth1: PBA No: FFFFFF-0FF
[ 6.226512] igb 0000:02:00.0: Using MSI-X interrupts. 4 rx queue(s), 4 tx queue(s)
[ 6.260328] pps pps2: new PPS source ptp2
[ 6.260333] igb 0000:03:00.0: added PHC on eth2
[ 6.260337] igb 0000:03:00.0: Intel(R) Gigabit Ethernet Network Connection
[ 6.260343] igb 0000:03:00.0: eth2: (PCIe:2.5Gb/s:Width x1) 00:0d:b9:43:3f:be
[ 6.260347] igb 0000:03:00.0: eth2: PBA No: FFFFFF-0FF
[ 6.260380] igb 0000:03:00.0: Using MSI-X interrupts. 4 rx queue(s), 4 tx queue(s)
[ 6.304273] usb 2-2: Manufacturer: Kingston
[ 6.310087] usb 2-2: SerialNumber: 60A44C3FB294BE115968000E
[ 6.322956] usb-storage 2-2:1.0: USB Mass Storage device detected
[ 6.330557] scsi host2: usb-storage 2-2:1.0
[ 6.336761] usbcore: registered new interface driver usb-storage
[ 6.500423] Switched to clocksource tsc
[ 7.341008] scsi 2:0:0:0: Direct-Access Kingston DataTraveler 2.0 PMAP PQ: 0 ANSI: 4
[ 7.352279] sd 2:0:0:0: Attached scsi generic sg0 type 0
[ 7.352433] sd 2:0:0:0: [sda] 30514176 512-byte logical blocks: (15.6 GB/14.5 GiB)
[ 7.352715] sd 2:0:0:0: [sda] Write Protect is off
[ 7.352723] sd 2:0:0:0: [sda] Mode Sense: 23 00 00 00
[ 7.359031] sd 2:0:0:0: [sda] No Caching mode page found
[ 7.359037] sd 2:0:0:0: [sda] Assuming drive cache: write through
[ 7.362608] sda: sda1
[ 7.364250] sd 2:0:0:0: [sda] Attached SCSI removable disk
[ 13.705246] random: nonblocking pool is initialized
[ 14.417369] systemd-udevd[1262]: starting version 215
[ 14.631678] acpi-cpufreq: overriding BIOS provided _PSD data
[ 14.913271] input: PC Speaker as /devices/platform/pcspkr/input/input2
[ 15.014442] piix4_smbus 0000:00:14.0: SMBus Host Controller at 0xb00, revision 0
[ 15.022409] piix4_smbus 0000:00:14.0: Auxiliary SMBus Host Controller at 0xb20
[ 16.105671] sp5100_tco: SP5100/SB800 TCO WatchDog Timer Driver v0.05
[ 17.334182] NET: Registered protocol family 10
[ 17.498516] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 17.755644] IPv6: ADDRCONF(NETDEV_UP): eth1: link is not ready
[ 18.181041] Installing knfsd (copyright (C) 1996 okir@monad.swb.de).
[ 19.086242] igb 0000:01:00.0 eth0: igb: eth0 NIC Link is Up 100 Mbps Full Duplex, Flow Control: RX/TX
[ 19.096594] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
[ 136.125579] igb 0000:01:00.0 eth0: igb: eth0 NIC Link is Down
[ 236.163986] igb 0000:01:00.0 eth0: igb: eth0 NIC Link is Up 100 Mbps Full Duplex, Flow Control: RX/TX