blob: 2a4040ccf81edd53a8a2519b062096edb8d6c1be [file] [log] [blame]
[ 0.000000] Initializing cgroup subsys cpuset
[ 0.000000] Initializing cgroup subsys cpu
[ 0.000000] Initializing cgroup subsys cpuacct
[ 0.000000] Linux version 3.16.0-1-grml-amd64 (team@grml.org) (gcc version 4.8.3 (Debian 4.8.3-13) ) #1 SMP Debian 3.16.7-1+grml.1 (2014-11-05)
[ 0.000000] Command line: initrd=/boot/grml64small/initrd.img boot=live live-media-path=/live/grml64-small/ bootid=grml64small201411 nomce console=ttyS0,115200n8 ssh=remote toram=grml64-small.squashfs BOOT_IMAGE=/boot/grml64small/vmlinuz
[ 0.000000] e820: BIOS-provided physical RAM map:
[ 0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009fbff] usable
[ 0.000000] BIOS-e820: [mem 0x000000000009fc00-0x000000000009ffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000000f0000-0x00000000000fffff] reserved
[ 0.000000] BIOS-e820: [mem 0x0000000000100000-0x00000000dfe33fff] usable
[ 0.000000] BIOS-e820: [mem 0x00000000dfe34000-0x00000000dfffffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000f8000000-0x00000000fbffffff] reserved
[ 0.000000] BIOS-e820: [mem 0x0000000100000000-0x000000011effffff] usable
[ 0.000000] NX (Execute Disable) protection: active
[ 0.000000] SMBIOS 2.7 present.
[ 0.000000] DMI: PC Engines APU1/APU1, BIOS 4.6-960-g1ac0aa9 08/02/2017
[ 0.000000] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
[ 0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable
[ 0.000000] AGP: No AGP bridge found
[ 0.000000] e820: last_pfn = 0x11f000 max_arch_pfn = 0x400000000
[ 0.000000] MTRR default type: uncachable
[ 0.000000] MTRR fixed ranges enabled:
[ 0.000000] 00000-9FFFF write-back
[ 0.000000] A0000-BFFFF uncachable
[ 0.000000] C0000-FFFFF write-back
[ 0.000000] MTRR variable ranges enabled:
[ 0.000000] 0 base 000000000 mask F80000000 write-back
[ 0.000000] 1 base 080000000 mask FC0000000 write-back
[ 0.000000] 2 base 0C0000000 mask FE0000000 write-back
[ 0.000000] 3 disabled
[ 0.000000] 4 disabled
[ 0.000000] 5 disabled
[ 0.000000] 6 base 0FFE00000 mask FFFE00000 write-protect
[ 0.000000] 7 disabled
[ 0.000000] TOM2: 000000011f000000 aka 4592M
[ 0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
[ 0.000000] e820: last_pfn = 0xdfe34 max_arch_pfn = 0x400000000
[ 0.000000] found SMP MP-table at [mem 0x000f06e0-0x000f06ef] mapped at [ffff8800000f06e0]
[ 0.000000] Scanning 1 areas for low memory corruption
[ 0.000000] Base memory trampoline at [ffff880000099000] 99000 size 24576
[ 0.000000] Using GB pages for direct mapping
[ 0.000000] init_memory_mapping: [mem 0x00000000-0x000fffff]
[ 0.000000] [mem 0x00000000-0x000fffff] page 4k
[ 0.000000] BRK [0x01af8000, 0x01af8fff] PGTABLE
[ 0.000000] BRK [0x01af9000, 0x01af9fff] PGTABLE
[ 0.000000] BRK [0x01afa000, 0x01afafff] PGTABLE
[ 0.000000] init_memory_mapping: [mem 0x11ee00000-0x11effffff]
[ 0.000000] [mem 0x11ee00000-0x11effffff] page 2M
[ 0.000000] BRK [0x01afb000, 0x01afbfff] PGTABLE
[ 0.000000] init_memory_mapping: [mem 0x11c000000-0x11edfffff]
[ 0.000000] [mem 0x11c000000-0x11edfffff] page 2M
[ 0.000000] init_memory_mapping: [mem 0x100000000-0x11bffffff]
[ 0.000000] [mem 0x100000000-0x11bffffff] page 2M
[ 0.000000] init_memory_mapping: [mem 0x00100000-0xdfe33fff]
[ 0.000000] [mem 0x00100000-0x001fffff] page 4k
[ 0.000000] [mem 0x00200000-0x3fffffff] page 2M
[ 0.000000] [mem 0x40000000-0xbfffffff] page 1G
[ 0.000000] [mem 0xc0000000-0xdfdfffff] page 2M
[ 0.000000] [mem 0xdfe00000-0xdfe33fff] page 4k
[ 0.000000] RAMDISK: [mem 0x7e84b000-0x7fffefff]
[ 0.000000] ACPI: Early table checksum verification disabled
[ 0.000000] ACPI: RSDP 0x00000000000F08B0 000024 (v02 CORE )
[ 0.000000] ACPI: XSDT 0x00000000DFE470E0 000064 (v01 CORE COREBOOT 00000000 CORE 00000000)
[ 0.000000] ACPI: FACP 0x00000000DFE49920 0000F4 (v04 CORE COREBOOT 00000000 CORE 00000000)
[ 0.000000] ACPI: DSDT 0x00000000DFE47280 00269E (v02 PCENG COREBOOT 00010001 INTL 20161222)
[ 0.000000] ACPI: FACS 0x00000000DFE47240 000040
[ 0.000000] ACPI: SSDT 0x00000000DFE49A20 00008A (v02 CORE COREBOOT 0000002A CORE 0000002A)
[ 0.000000] ACPI: TCPA 0x00000000DFE49AB0 000032 (v02 CORE COREBOOT 00000000 CORE 00000000)
[ 0.000000] ACPI: APIC 0x00000000DFE49AF0 00005C (v01 CORE COREBOOT 00000000 CORE 00000000)
[ 0.000000] ACPI: HEST 0x00000000DFE49B50 000198 (v01 CORE COREBOOT 00000000 CORE 00000000)
[ 0.000000] ACPI: SSDT 0x00000000DFE49CF0 00168E (v02 AMD ALIB 00000001 MSFT 04000000)
[ 0.000000] ACPI: SSDT 0x00000000DFE4B380 00030C (v01 AMD POWERNOW 00000001 AMD 00000001)
[ 0.000000] ACPI: HPET 0x00000000DFE4B690 000038 (v01 CORE COREBOOT 00000000 CORE 00000000)
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] No NUMA configuration found
[ 0.000000] Faking a node at [mem 0x0000000000000000-0x000000011effffff]
[ 0.000000] Initmem setup node 0 [mem 0x00000000-0x11effffff]
[ 0.000000] NODE_DATA [mem 0x11eff9000-0x11effdfff]
[ 0.000000] [ffffea0000000000-ffffea0003ffffff] PMD -> [ffff88011a600000-ffff88011dffffff] on node 0
[ 0.000000] Zone ranges:
[ 0.000000] DMA [mem 0x00001000-0x00ffffff]
[ 0.000000] DMA32 [mem 0x01000000-0xffffffff]
[ 0.000000] Normal [mem 0x100000000-0x11effffff]
[ 0.000000] Movable zone start for each node
[ 0.000000] Early memory node ranges
[ 0.000000] node 0: [mem 0x00001000-0x0009efff]
[ 0.000000] node 0: [mem 0x00100000-0xdfe33fff]
[ 0.000000] node 0: [mem 0x100000000-0x11effffff]
[ 0.000000] On node 0 totalpages: 1043922
[ 0.000000] DMA zone: 56 pages used for memmap
[ 0.000000] DMA zone: 21 pages reserved
[ 0.000000] DMA zone: 3998 pages, LIFO batch:0
[ 0.000000] DMA32 zone: 12482 pages used for memmap
[ 0.000000] DMA32 zone: 912948 pages, LIFO batch:31
[ 0.000000] Normal zone: 1736 pages used for memmap
[ 0.000000] Normal zone: 126976 pages, LIFO batch:31
[ 0.000000] ACPI: PM-Timer IO Port: 0x808
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled)
[ 0.000000] ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
[ 0.000000] IOAPIC[0]: apic_id 2, version 33, address 0xfec00000, GSI 0-23
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 low level)
[ 0.000000] ACPI: IRQ0 used by override.
[ 0.000000] ACPI: IRQ2 used by override.
[ 0.000000] ACPI: IRQ9 used by override.
[ 0.000000] Using ACPI (MADT) for SMP configuration information
[ 0.000000] ACPI: HPET id: 0x43538210 base: 0xfed00000
[ 0.000000] smpboot: Allowing 2 CPUs, 0 hotplug CPUs
[ 0.000000] nr_irqs_gsi: 40
[ 0.000000] PM: Registered nosave memory: [mem 0x0009f000-0x0009ffff]
[ 0.000000] PM: Registered nosave memory: [mem 0x000a0000-0x000effff]
[ 0.000000] PM: Registered nosave memory: [mem 0x000f0000-0x000fffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xdfe34000-0xdfffffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xe0000000-0xf7ffffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xf8000000-0xfbffffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfc000000-0xffffffff]
[ 0.000000] e820: [mem 0xe0000000-0xf7ffffff] available for PCI devices
[ 0.000000] Booting paravirtualized kernel on bare hardware
[ 0.000000] setup_percpu: NR_CPUS:512 nr_cpumask_bits:512 nr_cpu_ids:2 nr_node_ids:1
[ 0.000000] PERCPU: Embedded 28 pages/cpu @ffff88011ec00000 s85824 r8192 d20672 u1048576
[ 0.000000] pcpu-alloc: s85824 r8192 d20672 u1048576 alloc=1*2097152
[ 0.000000] pcpu-alloc: [0] 0 1
[ 0.000000] Built 1 zonelists in Node order, mobility grouping on. Total pages: 1029627
[ 0.000000] Policy zone: Normal
[ 0.000000] Kernel command line: initrd=/boot/grml64small/initrd.img boot=live live-media-path=/live/grml64-small/ bootid=grml64small201411 nomce console=ttyS0,115200n8 ssh=remote toram=grml64-small.squashfs BOOT_IMAGE=/boot/grml64small/vmlinuz
[ 0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes)
[ 0.000000] AGP: Checking aperture...
[ 0.000000] AGP: No AGP bridge found
[ 0.000000] Calgary: detecting Calgary via BIOS EBDA area
[ 0.000000] Calgary: Unable to locate Rio Grande table in EBDA - bailing!
[ 0.000000] Memory: 4014132K/4175688K available (5357K kernel code, 947K rwdata, 1928K rodata, 1220K init, 840K bss, 161556K reserved)
[ 0.000000] Hierarchical RCU implementation.
[ 0.000000] RCU dyntick-idle grace-period acceleration is enabled.
[ 0.000000] RCU restricting CPUs from NR_CPUS=512 to nr_cpu_ids=2.
[ 0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=2
[ 0.000000] NR_IRQS:33024 nr_irqs:512 16
[ 0.000000] Console: colour dummy device 80x25
[ 0.000000] console [ttyS0] enabled
[ 0.000000] hpet clockevent registered
[ 0.000000] tsc: Fast TSC calibration using PIT
[ 0.000000] tsc: Detected 1000.059 MHz processor
[ 0.000077] Calibrating delay loop (skipped), value calculated using timer frequency.. 2000.11 BogoMIPS (lpj=4000236)
[ 0.010783] pid_max: default: 32768 minimum: 301
[ 0.015444] ACPI: Core revision 20140424
[ 0.029572] ACPI: All ACPI Tables successfully acquired
[ 0.035010] Security Framework initialized
[ 0.039195] AppArmor: AppArmor disabled by boot time parameter
[ 0.045042] Yama: disabled by default; enable with sysctl kernel.yama.*
[ 0.052462] Dentry cache hash table entries: 524288 (order: 10, 4194304 bytes)
[ 0.063138] Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes)
[ 0.071908] Mount-cache hash table entries: 8192 (order: 4, 65536 bytes)
[ 0.078724] Mountpoint-cache hash table entries: 8192 (order: 4, 65536 bytes)
[ 0.086638] Initializing cgroup subsys memory
[ 0.091093] Initializing cgroup subsys devices
[ 0.095577] Initializing cgroup subsys freezer
[ 0.100048] Initializing cgroup subsys net_cls
[ 0.104528] Initializing cgroup subsys blkio
[ 0.108830] Initializing cgroup subsys perf_event
[ 0.113557] Initializing cgroup subsys net_prio
[ 0.118176] tseg: 0000000000
[ 0.118193] CPU: Physical Processor ID: 0
[ 0.122273] CPU: Processor Core ID: 0
[ 0.125960] Last level iTLB entries: 4KB 512, 2MB 8, 4MB 4
Last level dTLB entries: 4KB 512, 2MB 8, 4MB 4, 1GB 0
tlb_flushall_shift: 6
[ 0.141074] Freeing SMP alternatives memory: 20K (ffffffff81a1f000 - ffffffff81a24000)
[ 0.152331] ftrace: allocating 22111 entries in 87 pages
[ 0.184464] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=0 pin2=0
[ 0.230022] smpboot: CPU0: AMD G-T40E Processor (fam: 14, model: 02, stepping: 00)
[ 0.344794] Performance Events: AMD PMU driver.
[ 0.349424] ... version: 0
[ 0.353444] ... bit width: 48
[ 0.357555] ... generic registers: 4
[ 0.361574] ... value mask: 0000ffffffffffff
[ 0.366895] ... max period: 00007fffffffffff
[ 0.372217] ... fixed-purpose events: 0
[ 0.376240] ... event mask: 000000000000000f
[ 0.386343] NMI watchdog: enabled on all CPUs, permanently consumes one hw-PMU counter.
[ 0.394795] x86: Booting SMP configuration:
[ 0.399042] .... node #0, CPUs: #1
[ 0.415994] x86: Booted up 1 node, 2 CPUs
[ 0.420218] smpboot: Total of 2 processors activated (4000.23 BogoMIPS)
[ 0.427849] devtmpfs: initialized
[ 0.445750] pinctrl core: initialized pinctrl subsystem
[ 0.451380] NET: Registered protocol family 16
[ 0.456305] cpuidle: using governor ladder
[ 0.460468] cpuidle: using governor menu
[ 0.464685] ACPI: bus type PCI registered
[ 0.468752] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
[ 0.475541] PCI: Using configuration type 1 for base access
[ 0.481124] PCI: Using configuration type 1 for extended access
[ 0.502548] ACPI: Added _OSI(Module Device)
[ 0.506817] ACPI: Added _OSI(Processor Device)
[ 0.511270] ACPI: Added _OSI(3.0 _SCP Extensions)
[ 0.515982] ACPI: Added _OSI(Processor Aggregator Device)
[ 0.524921] ACPI: Executed 3 blocks of module-level executable AML code
[ 0.538279] ACPI: Interpreter enabled
[ 0.541982] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S2_] (20140424/hwxface-580)
[ 0.551299] ACPI: (supports S0 S1 S3 S4 S5)
[ 0.555493] ACPI: Using IOAPIC for interrupt routing
[ 0.560525] HEST: Table parsing has been initialized.
[ 0.565638] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
[ 0.596136] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
[ 0.602395] acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI]
[ 0.610818] acpi PNP0A08:00: _OSC: OS now controls [PCIeHotplug PME AER PCIeCapability]
[ 0.619706] PCI host bridge to bus 0000:00
[ 0.623821] pci_bus 0000:00: root bus resource [bus 00-ff]
[ 0.629318] pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7]
[ 0.635504] pci_bus 0000:00: root bus resource [io 0x0d00-0xffff]
[ 0.641695] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff]
[ 0.648574] pci_bus 0000:00: root bus resource [mem 0xe0000000-0xffffffff]
[ 0.655474] pci 0000:00:00.0: [1022:1510] type 00 class 0x060000
[ 0.655820] pci 0000:00:04.0: [1022:1512] type 01 class 0x060400
[ 0.655930] pci 0000:00:04.0: PME# supported from D0 D3hot D3cold
[ 0.656079] pci 0000:00:04.0: System wakeup disabled by ACPI
[ 0.661931] pci 0000:00:05.0: [1022:1513] type 01 class 0x060400
[ 0.662037] pci 0000:00:05.0: PME# supported from D0 D3hot D3cold
[ 0.662173] pci 0000:00:05.0: System wakeup disabled by ACPI
[ 0.668033] pci 0000:00:06.0: [1022:1514] type 01 class 0x060400
[ 0.668139] pci 0000:00:06.0: PME# supported from D0 D3hot D3cold
[ 0.668275] pci 0000:00:06.0: System wakeup disabled by ACPI
[ 0.674196] pci 0000:00:11.0: [1002:4391] type 00 class 0x010601
[ 0.674232] pci 0000:00:11.0: reg 0x10: [io 0x4010-0x4017]
[ 0.674250] pci 0000:00:11.0: reg 0x14: [io 0x4020-0x4023]
[ 0.674268] pci 0000:00:11.0: reg 0x18: [io 0x4018-0x401f]
[ 0.674286] pci 0000:00:11.0: reg 0x1c: [io 0x4024-0x4027]
[ 0.674304] pci 0000:00:11.0: reg 0x20: [io 0x4000-0x400f]
[ 0.674323] pci 0000:00:11.0: reg 0x24: [mem 0xf7f03000-0xf7f033ff]
[ 0.674665] pci 0000:00:12.0: [1002:4397] type 00 class 0x0c0310
[ 0.674692] pci 0000:00:12.0: reg 0x10: [mem 0xf7f00000-0xf7f00fff]
[ 0.674900] pci 0000:00:12.0: System wakeup disabled by ACPI
[ 0.680777] pci 0000:00:12.2: [1002:4396] type 00 class 0x0c0320
[ 0.680811] pci 0000:00:12.2: reg 0x10: [mem 0xf7f04000-0xf7f040ff]
[ 0.680940] pci 0000:00:12.2: supports D1 D2
[ 0.680946] pci 0000:00:12.2: PME# supported from D0 D1 D2 D3hot
[ 0.681077] pci 0000:00:12.2: System wakeup disabled by ACPI
[ 0.686978] pci 0000:00:13.0: [1002:4397] type 00 class 0x0c0310
[ 0.687004] pci 0000:00:13.0: reg 0x10: [mem 0xf7f01000-0xf7f01fff]
[ 0.687208] pci 0000:00:13.0: System wakeup disabled by ACPI
[ 0.693112] pci 0000:00:13.2: [1002:4396] type 00 class 0x0c0320
[ 0.693146] pci 0000:00:13.2: reg 0x10: [mem 0xf7f05000-0xf7f050ff]
[ 0.693275] pci 0000:00:13.2: supports D1 D2
[ 0.693281] pci 0000:00:13.2: PME# supported from D0 D1 D2 D3hot
[ 0.693416] pci 0000:00:13.2: System wakeup disabled by ACPI
[ 0.699322] pci 0000:00:14.0: [1002:4385] type 00 class 0x0c0500
[ 0.699694] pci 0000:00:14.3: [1002:439d] type 00 class 0x060100
[ 0.700069] pci 0000:00:14.4: [1002:4384] type 01 class 0x060401
[ 0.700247] pci 0000:00:14.4: System wakeup disabled by ACPI
[ 0.706106] pci 0000:00:16.0: [1002:4397] type 00 class 0x0c0310
[ 0.706132] pci 0000:00:16.0: reg 0x10: [mem 0xf7f02000-0xf7f02fff]
[ 0.706341] pci 0000:00:16.0: System wakeup disabled by ACPI
[ 0.712228] pci 0000:00:16.2: [1002:4396] type 00 class 0x0c0320
[ 0.712262] pci 0000:00:16.2: reg 0x10: [mem 0xf7f06000-0xf7f060ff]
[ 0.712391] pci 0000:00:16.2: supports D1 D2
[ 0.712397] pci 0000:00:16.2: PME# supported from D0 D1 D2 D3hot
[ 0.712528] pci 0000:00:16.2: System wakeup disabled by ACPI
[ 0.718399] pci 0000:00:18.0: [1022:1700] type 00 class 0x060000
[ 0.718660] pci 0000:00:18.1: [1022:1701] type 00 class 0x060000
[ 0.718913] pci 0000:00:18.2: [1022:1702] type 00 class 0x060000
[ 0.719170] pci 0000:00:18.3: [1022:1703] type 00 class 0x060000
[ 0.719451] pci 0000:00:18.4: [1022:1704] type 00 class 0x060000
[ 0.719708] pci 0000:00:18.5: [1022:1718] type 00 class 0x060000
[ 0.719961] pci 0000:00:18.6: [1022:1716] type 00 class 0x060000
[ 0.720223] pci 0000:00:18.7: [1022:1719] type 00 class 0x060000
[ 0.720654] pci 0000:01:00.0: [10ec:8168] type 00 class 0x020000
[ 0.720684] pci 0000:01:00.0: reg 0x10: [io 0x1000-0x10ff]
[ 0.720722] pci 0000:01:00.0: reg 0x18: [mem 0xf7a00000-0xf7a00fff 64bit]
[ 0.720749] pci 0000:01:00.0: reg 0x20: [mem 0xf7900000-0xf7903fff 64bit pref]
[ 0.720867] pci 0000:01:00.0: supports D1 D2
[ 0.720873] pci 0000:01:00.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.732281] pci 0000:00:04.0: PCI bridge to [bus 01]
[ 0.737330] pci 0000:00:04.0: bridge window [io 0x1000-0x1fff]
[ 0.737341] pci 0000:00:04.0: bridge window [mem 0xf7a00000-0xf7afffff]
[ 0.737353] pci 0000:00:04.0: bridge window [mem 0xf7900000-0xf79fffff 64bit pref]
[ 0.737574] pci 0000:02:00.0: [10ec:8168] type 00 class 0x020000
[ 0.737608] pci 0000:02:00.0: reg 0x10: [io 0x2000-0x20ff]
[ 0.737647] pci 0000:02:00.0: reg 0x18: [mem 0xf7c00000-0xf7c00fff 64bit]
[ 0.737673] pci 0000:02:00.0: reg 0x20: [mem 0xf7b00000-0xf7b03fff 64bit pref]
[ 0.737798] pci 0000:02:00.0: supports D1 D2
[ 0.737805] pci 0000:02:00.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.748280] pci 0000:00:05.0: PCI bridge to [bus 02]
[ 0.753275] pci 0000:00:05.0: bridge window [io 0x2000-0x2fff]
[ 0.753285] pci 0000:00:05.0: bridge window [mem 0xf7c00000-0xf7cfffff]
[ 0.753298] pci 0000:00:05.0: bridge window [mem 0xf7b00000-0xf7bfffff 64bit pref]
[ 0.753523] pci 0000:03:00.0: [10ec:8168] type 00 class 0x020000
[ 0.753558] pci 0000:03:00.0: reg 0x10: [io 0x3000-0x30ff]
[ 0.753597] pci 0000:03:00.0: reg 0x18: [mem 0xf7e00000-0xf7e00fff 64bit]
[ 0.753623] pci 0000:03:00.0: reg 0x20: [mem 0xf7d00000-0xf7d03fff 64bit pref]
[ 0.753746] pci 0000:03:00.0: supports D1 D2
[ 0.753752] pci 0000:03:00.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.764280] pci 0000:00:06.0: PCI bridge to [bus 03]
[ 0.769327] pci 0000:00:06.0: bridge window [io 0x3000-0x3fff]
[ 0.769337] pci 0000:00:06.0: bridge window [mem 0xf7e00000-0xf7efffff]
[ 0.769350] pci 0000:00:06.0: bridge window [mem 0xf7d00000-0xf7dfffff 64bit pref]
[ 0.769621] pci 0000:00:14.4: PCI bridge to [bus 04] (subtractive decode)
[ 0.776430] pci 0000:00:14.4: bridge window [io 0x0000-0x0cf7] (subtractive decode)
[ 0.776438] pci 0000:00:14.4: bridge window [io 0x0d00-0xffff] (subtractive decode)
[ 0.776445] pci 0000:00:14.4: bridge window [mem 0x000a0000-0x000bffff] (subtractive decode)
[ 0.776452] pci 0000:00:14.4: bridge window [mem 0xe0000000-0xffffffff] (subtractive decode)
[ 0.778261] ACPI: PCI Interrupt Link [INTA] (IRQs 3 4 5 7 *10 11 12 15)
[ 0.785292] ACPI: PCI Interrupt Link [INTB] (IRQs 3 4 5 7 10 *11 12 15)
[ 0.792321] ACPI: PCI Interrupt Link [INTC] (IRQs 3 4 5 7 *10 11 12 15)
[ 0.799380] ACPI: PCI Interrupt Link [INTD] (IRQs 3 4 5 7 10 *11 12 15)
[ 0.806452] ACPI: PCI Interrupt Link [INTE] (IRQs 3 4 5 7 *10 11 12 15)
[ 0.813500] ACPI: PCI Interrupt Link [INTF] (IRQs 9) *11
[ 0.819113] ACPI: PCI Interrupt Link [INTG] (IRQs 3 4 5 7 *10 11 12 15)
[ 0.826176] ACPI: PCI Interrupt Link [INTH] (IRQs 3 4 5 7 10 *11 12 15)
[ 0.833487] ACPI: Enabled 6 GPEs in block 00 to 1F
[ 0.838858] vgaarb: loaded
[ 0.841810] PCI: Using ACPI for IRQ routing
[ 0.846058] PCI: pci_cache_line_size set to 64 bytes
[ 0.846218] e820: reserve RAM buffer [mem 0x0009fc00-0x0009ffff]
[ 0.846225] e820: reserve RAM buffer [mem 0xdfe34000-0xdfffffff]
[ 0.846230] e820: reserve RAM buffer [mem 0x11f000000-0x11fffffff]
[ 0.846749] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0
[ 0.851741] hpet0: 3 comparators, 32-bit 14.318180 MHz counter
[ 0.859734] Switched to clocksource hpet
[ 0.881276] pnp: PnP ACPI init
[ 0.884479] ACPI: bus type PNP registered
[ 0.889189] pnp 00:00: Plug and Play ACPI device, IDs PNP0b00 (active)
[ 0.889535] pnp: PnP ACPI: found 1 devices
[ 0.893715] ACPI: bus type PNP unregistered
[ 0.915364] pci 0000:00:04.0: PCI bridge to [bus 01]
[ 0.920356] pci 0000:00:04.0: bridge window [io 0x1000-0x1fff]
[ 0.926473] pci 0000:00:04.0: bridge window [mem 0xf7a00000-0xf7afffff]
[ 0.933276] pci 0000:00:04.0: bridge window [mem 0xf7900000-0xf79fffff 64bit pref]
[ 0.941034] pci 0000:00:05.0: PCI bridge to [bus 02]
[ 0.946013] pci 0000:00:05.0: bridge window [io 0x2000-0x2fff]
[ 0.952124] pci 0000:00:05.0: bridge window [mem 0xf7c00000-0xf7cfffff]
[ 0.958927] pci 0000:00:05.0: bridge window [mem 0xf7b00000-0xf7bfffff 64bit pref]
[ 0.966685] pci 0000:00:06.0: PCI bridge to [bus 03]
[ 0.971663] pci 0000:00:06.0: bridge window [io 0x3000-0x3fff]
[ 0.977768] pci 0000:00:06.0: bridge window [mem 0xf7e00000-0xf7efffff]
[ 0.984572] pci 0000:00:06.0: bridge window [mem 0xf7d00000-0xf7dfffff 64bit pref]
[ 0.992331] pci 0000:00:14.4: PCI bridge to [bus 04]
[ 0.997327] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7]
[ 0.997333] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff]
[ 0.997340] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff]
[ 0.997346] pci_bus 0000:00: resource 7 [mem 0xe0000000-0xffffffff]
[ 0.997353] pci_bus 0000:01: resource 0 [io 0x1000-0x1fff]
[ 0.997359] pci_bus 0000:01: resource 1 [mem 0xf7a00000-0xf7afffff]
[ 0.997365] pci_bus 0000:01: resource 2 [mem 0xf7900000-0xf79fffff 64bit pref]
[ 0.997372] pci_bus 0000:02: resource 0 [io 0x2000-0x2fff]
[ 0.997378] pci_bus 0000:02: resource 1 [mem 0xf7c00000-0xf7cfffff]
[ 0.997385] pci_bus 0000:02: resource 2 [mem 0xf7b00000-0xf7bfffff 64bit pref]
[ 0.997391] pci_bus 0000:03: resource 0 [io 0x3000-0x3fff]
[ 0.997397] pci_bus 0000:03: resource 1 [mem 0xf7e00000-0xf7efffff]
[ 0.997404] pci_bus 0000:03: resource 2 [mem 0xf7d00000-0xf7dfffff 64bit pref]
[ 0.997411] pci_bus 0000:04: resource 4 [io 0x0000-0x0cf7]
[ 0.997417] pci_bus 0000:04: resource 5 [io 0x0d00-0xffff]
[ 0.997423] pci_bus 0000:04: resource 6 [mem 0x000a0000-0x000bffff]
[ 0.997430] pci_bus 0000:04: resource 7 [mem 0xe0000000-0xffffffff]
[ 0.997625] NET: Registered protocol family 2
[ 1.002817] TCP established hash table entries: 32768 (order: 6, 262144 bytes)
[ 1.010425] TCP bind hash table entries: 32768 (order: 7, 524288 bytes)
[ 1.017471] TCP: Hash tables configured (established 32768 bind 32768)
[ 1.024175] TCP: reno registered
[ 1.027457] UDP hash table entries: 2048 (order: 4, 65536 bytes)
[ 1.033562] UDP-Lite hash table entries: 2048 (order: 4, 65536 bytes)
[ 1.040550] NET: Registered protocol family 1
[ 1.048615] PCI: CLS 64 bytes, default 64
[ 1.048784] Unpacking initramfs...
[ 9.360674] Freeing initrd memory: 24272K (ffff88007e84b000 - ffff88007ffff000)
[ 9.368097] PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
[ 9.374556] software IO TLB [mem 0xdbe34000-0xdfe34000] (64MB) mapped at [ffff8800dbe34000-ffff8800dfe33fff]
[ 9.385213] microcode: CPU0: patch_level=0x05000119
[ 9.390121] microcode: CPU1: patch_level=0x05000119
[ 9.395302] microcode: Microcode Update Driver: v2.00 <tigran@aivazian.fsnet.co.uk>, Peter Oruba
[ 9.404161] LVT offset 0 assigned for vector 0x400
[ 9.409084] perf: AMD IBS detected (0x000000ff)
[ 9.413703] Scanning for low memory corruption every 60 seconds
[ 9.420870] futex hash table entries: 512 (order: 3, 32768 bytes)
[ 9.427204] audit: initializing netlink subsys (disabled)
[ 9.432672] audit: type=2000 audit(1496971356.256:1): initialized
[ 9.440152] HugeTLB registered 2 MB page size, pre-allocated 0 pages
[ 9.446685] zbud: loaded
[ 9.450241] VFS: Disk quotas dquot_6.5.2
[ 9.454358] Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[ 9.460998] squashfs: version 4.0 (2009/01/31) Phillip Lougher
[ 9.467253] aufs 3.16-20140908
[ 9.470377] msgmni has been set to 7887
[ 9.476487] alg: No test for stdrng (krng)
[ 9.480808] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252)
[ 9.488447] io scheduler noop registered
[ 9.492408] io scheduler deadline registered
[ 9.496897] io scheduler cfq registered (default)
[ 9.502274] pcieport 0000:00:04.0: irq 40 for MSI/MSI-X
[ 9.502697] pcieport 0000:00:05.0: irq 41 for MSI/MSI-X
[ 9.503106] pcieport 0000:00:06.0: irq 42 for MSI/MSI-X
[ 9.503341] pcieport 0000:00:04.0: Signaling PME through PCIe PME interrupt
[ 9.510368] pci 0000:01:00.0: Signaling PME through PCIe PME interrupt
[ 9.516914] pcie_pme 0000:00:04.0:pcie01: service driver pcie_pme loaded
[ 9.516963] pcieport 0000:00:05.0: Signaling PME through PCIe PME interrupt
[ 9.523985] pci 0000:02:00.0: Signaling PME through PCIe PME interrupt
[ 9.530526] pcie_pme 0000:00:05.0:pcie01: service driver pcie_pme loaded
[ 9.530573] pcieport 0000:00:06.0: Signaling PME through PCIe PME interrupt
[ 9.537597] pci 0000:03:00.0: Signaling PME through PCIe PME interrupt
[ 9.544138] pcie_pme 0000:00:06.0:pcie01: service driver pcie_pme loaded
[ 9.544199] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[ 9.549904] pciehp: PCI Express Hot Plug Controller Driver version: 0.4
[ 9.556867] GHES: Failed to enable APEI firmware first mode.
[ 9.562978] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
[ 9.589981] serial8250: ttyS0 at I/O 0x3f8 (irq = 4, base_baud = 115200) is a 16550A
[ 9.618612] serial8250: ttyS1 at I/O 0x2f8 (irq = 3, base_baud = 115200) is a 16550A
[ 9.627946] Linux agpgart interface v0.103
[ 9.632494] i8042: PNP: No PS/2 controller found. Probing ports directly.
[ 11.565677] i8042: No controller found
[ 11.569539] tsc: Refined TSC clocksource calibration: 999.999 MHz
[ 11.569876] mousedev: PS/2 mouse device common for all mice
[ 11.570009] rtc_cmos 00:00: RTC can wake from S4
[ 11.570293] rtc_cmos 00:00: rtc core: registered rtc_cmos as rtc0
[ 11.570354] rtc_cmos 00:00: alarms up to one day, 114 bytes nvram, hpet irqs
[ 11.570395] ledtrig-cpu: registered to indicate activity on CPUs
[ 11.570592] AMD IOMMUv2 driver by Joerg Roedel <joerg.roedel@amd.com>
[ 11.570594] AMD IOMMUv2 functionality not available on this system
[ 11.570862] TCP: cubic registered
[ 11.621033] NET: Registered protocol family 10
[ 11.626365] mip6: Mobile IPv6
[ 11.629420] NET: Registered protocol family 17
[ 11.633900] mpls_gso: MPLS GSO support
[ 11.637675] mce: Unable to init device /dev/mcelog (rc: -5)
[ 11.644441] registered taskstats version 1
[ 11.650008] rtc_cmos 00:00: setting system clock to 2017-06-09 01:22:40 UTC (1496971360)
[ 11.658301] PM: Hibernation image not present or could not be loaded.
[ 11.662060] Freeing unused kernel memory: 1220K (ffffffff818ee000 - ffffffff81a1f000)
[ 11.669978] Write protecting the kernel read-only data: 8192k
[ 11.682703] Freeing unused kernel memory: 776K (ffff88000153e000 - ffff880001600000)
[ 11.691814] Freeing unused kernel memory: 120K (ffff8800017e2000 - ffff880001800000)
[ 11.762098] systemd-udevd[66]: starting version 215
[ 11.763263] random: systemd-udevd urandom read with 4 bits of entropy available
[ 11.802399] r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded
[ 11.802496] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input0
[ 11.802516] ACPI: Power Button [PWRB]
[ 11.802699] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input1
[ 11.802709] ACPI: Power Button [PWRF]
[ 11.806858] r8169 0000:01:00.0: irq 43 for MSI/MSI-X
[ 11.808239] r8169 0000:01:00.0 eth0: RTL8168e/8111e at 0xffffc90000002000, 00:0d:b9:37:e5:20, XID 0c200000 IRQ 43
[ 11.808251] r8169 0000:01:00.0 eth0: jumbo features [frames: 9200 bytes, tx checksumming: ko]
[ 11.808381] r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded
[ 11.808747] r8169 0000:02:00.0: irq 44 for MSI/MSI-X
[ 11.809170] r8169 0000:02:00.0 eth1: RTL8168e/8111e at 0xffffc90000636000, 00:0d:b9:37:e5:21, XID 0c200000 IRQ 44
[ 11.809178] r8169 0000:02:00.0 eth1: jumbo features [frames: 9200 bytes, tx checksumming: ko]
[ 11.809270] r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded
[ 11.809605] r8169 0000:03:00.0: irq 45 for MSI/MSI-X
[ 11.810011] r8169 0000:03:00.0 eth2: RTL8168e/8111e at 0xffffc90000728000, 00:0d:b9:37:e5:22, XID 0c200000 IRQ 45
[ 11.810018] r8169 0000:03:00.0 eth2: jumbo features [frames: 9200 bytes, tx checksumming: ko]
[ 11.818388] thermal LNXTHERM:00: registered as thermal_zone0
[ 11.818401] ACPI: Thermal Zone [TZ00] (50 C)
[ 11.831702] ACPI: bus type USB registered
[ 11.831955] usbcore: registered new interface driver usbfs
[ 11.831995] usbcore: registered new interface driver hub
[ 11.832003] SCSI subsystem initialized
[ 11.845188] libata version 3.00 loaded.
[ 11.845622] usbcore: registered new device driver usb
[ 11.847167] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 11.847910] ehci-pci: EHCI PCI platform driver
[ 11.848368] QUIRK: Enable AMD PLL fix
[ 11.848480] ehci-pci 0000:00:12.2: EHCI Host Controller
[ 11.848503] ehci-pci 0000:00:12.2: new USB bus registered, assigned bus number 1
[ 11.848524] ehci-pci 0000:00:12.2: applying AMD SB700/SB800/Hudson-2/3 EHCI dummy qh workaround
[ 11.848589] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[ 11.848593] ehci-pci 0000:00:12.2: debug port 1
[ 11.848711] ehci-pci 0000:00:12.2: irq 17, io mem 0xf7f04000
[ 11.863144] ehci-pci 0000:00:12.2: USB 2.0 started, EHCI 1.00
[ 11.864761] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
[ 11.864773] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 11.864780] usb usb1: Product: EHCI Host Controller
[ 11.864786] usb usb1: Manufacturer: Linux 3.16.0-1-grml-amd64 ehci_hcd
[ 11.864792] usb usb1: SerialNumber: 0000:00:12.2
[ 11.866399] hub 1-0:1.0: USB hub found
[ 11.867509] hub 1-0:1.0: 5 ports detected
[ 11.870770] ehci-pci 0000:00:13.2: EHCI Host Controller
[ 11.870796] ehci-pci 0000:00:13.2: new USB bus registered, assigned bus number 2
[ 11.870813] ehci-pci 0000:00:13.2: applying AMD SB700/SB800/Hudson-2/3 EHCI dummy qh workaround
[ 11.870880] ehci-pci 0000:00:13.2: debug port 1
[ 11.870954] ehci-pci 0000:00:13.2: irq 17, io mem 0xf7f05000
[ 11.880097] ehci-pci 0000:00:13.2: USB 2.0 started, EHCI 1.00
[ 11.880256] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002
[ 11.880265] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 11.880272] usb usb2: Product: EHCI Host Controller
[ 11.880278] usb usb2: Manufacturer: Linux 3.16.0-1-grml-amd64 ehci_hcd
[ 11.880284] usb usb2: SerialNumber: 0000:00:13.2
[ 11.880691] hub 2-0:1.0: USB hub found
[ 11.880721] hub 2-0:1.0: 5 ports detected
[ 11.881629] ehci-pci 0000:00:16.2: EHCI Host Controller
[ 11.881651] ehci-pci 0000:00:16.2: new USB bus registered, assigned bus number 3
[ 11.881668] ehci-pci 0000:00:16.2: applying AMD SB700/SB800/Hudson-2/3 EHCI dummy qh workaround
[ 11.881717] ehci-pci 0000:00:16.2: debug port 1
[ 11.881791] ehci-pci 0000:00:16.2: irq 17, io mem 0xf7f06000
[ 11.891798] ehci-pci 0000:00:16.2: USB 2.0 started, EHCI 1.00
[ 11.891977] usb usb3: New USB device found, idVendor=1d6b, idProduct=0002
[ 11.891985] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 11.891992] usb usb3: Product: EHCI Host Controller
[ 11.891998] usb usb3: Manufacturer: Linux 3.16.0-1-grml-amd64 ehci_hcd
[ 11.892004] usb usb3: SerialNumber: 0000:00:16.2
[ 11.892410] hub 3-0:1.0: USB hub found
[ 11.892440] hub 3-0:1.0: 4 ports detected
[ 11.892942] ahci 0000:00:11.0: version 3.0
[ 11.893571] ahci 0000:00:11.0: AHCI 0001.0200 32 slots 6 ports 6 Gbps 0x3f impl SATA mode
[ 11.893582] ahci 0000:00:11.0: flags: 64bit ncq sntf ilck led clo pmp pio slum part
[ 11.897563] ohci-pci: OHCI PCI platform driver
[ 11.902290] scsi0 : ahci
[ 11.902779] scsi1 : ahci
[ 11.904159] scsi2 : ahci
[ 11.904564] scsi3 : ahci
[ 11.910017] scsi4 : ahci
[ 11.914082] scsi5 : ahci
[ 11.914343] ata1: SATA max UDMA/133 abar m1024@0xf7f03000 port 0xf7f03100 irq 19
[ 11.914353] ata2: SATA max UDMA/133 abar m1024@0xf7f03000 port 0xf7f03180 irq 19
[ 11.914361] ata3: SATA max UDMA/133 abar m1024@0xf7f03000 port 0xf7f03200 irq 19
[ 11.914369] ata4: SATA max UDMA/133 abar m1024@0xf7f03000 port 0xf7f03280 irq 19
[ 11.914377] ata5: SATA max UDMA/133 abar m1024@0xf7f03000 port 0xf7f03300 irq 19
[ 11.914384] ata6: SATA max UDMA/133 abar m1024@0xf7f03000 port 0xf7f03380 irq 19
[ 11.914998] ohci-pci 0000:00:12.0: OHCI PCI host controller
[ 11.915022] ohci-pci 0000:00:12.0: new USB bus registered, assigned bus number 4
[ 11.915167] ohci-pci 0000:00:12.0: irq 18, io mem 0xf7f00000
[ 11.972200] usb usb4: New USB device found, idVendor=1d6b, idProduct=0001
[ 11.972214] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 11.972221] usb usb4: Product: OHCI PCI host controller
[ 11.972227] usb usb4: Manufacturer: Linux 3.16.0-1-grml-amd64 ohci_hcd
[ 11.972233] usb usb4: SerialNumber: 0000:00:12.0
[ 11.972977] hub 4-0:1.0: USB hub found
[ 11.973059] hub 4-0:1.0: 5 ports detected
[ 11.973876] ohci-pci 0000:00:13.0: OHCI PCI host controller
[ 11.973896] ohci-pci 0000:00:13.0: new USB bus registered, assigned bus number 5
[ 11.973967] ohci-pci 0000:00:13.0: irq 18, io mem 0xf7f01000
[ 12.032247] usb usb5: New USB device found, idVendor=1d6b, idProduct=0001
[ 12.032261] usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 12.032268] usb usb5: Product: OHCI PCI host controller
[ 12.032274] usb usb5: Manufacturer: Linux 3.16.0-1-grml-amd64 ohci_hcd
[ 12.032280] usb usb5: SerialNumber: 0000:00:13.0
[ 12.033023] hub 5-0:1.0: USB hub found
[ 12.033088] hub 5-0:1.0: 5 ports detected
[ 12.033929] ohci-pci 0000:00:16.0: OHCI PCI host controller
[ 12.033950] ohci-pci 0000:00:16.0: new USB bus registered, assigned bus number 6
[ 12.034024] ohci-pci 0000:00:16.0: irq 18, io mem 0xf7f02000
[ 12.092219] usb usb6: New USB device found, idVendor=1d6b, idProduct=0001
[ 12.092233] usb usb6: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 12.092240] usb usb6: Product: OHCI PCI host controller
[ 12.092246] usb usb6: Manufacturer: Linux 3.16.0-1-grml-amd64 ohci_hcd
[ 12.092252] usb usb6: SerialNumber: 0000:00:16.0
[ 12.092972] hub 6-0:1.0: USB hub found
[ 12.093052] hub 6-0:1.0: 4 ports detected
[ 12.180202] usb 1-5: new high-speed USB device number 2 using ehci-pci
[ 12.232052] ata1: SATA link down (SStatus 0 SControl 300)
[ 12.232117] ata2: SATA link down (SStatus 0 SControl 300)
[ 12.236095] ata4: SATA link down (SStatus 0 SControl 300)
[ 12.236160] ata6: SATA link down (SStatus 0 SControl 300)
[ 12.236210] ata3: SATA link down (SStatus 0 SControl 300)
[ 12.236245] ata5: SATA link down (SStatus 0 SControl 300)
[ 12.273434] device-mapper: uevent: version 1.0.3
[ 12.273691] device-mapper: ioctl: 4.27.0-ioctl (2013-10-30) initialised: dm-devel@redhat.com
[ 12.312495] usb 1-5: New USB device found, idVendor=0457, idProduct=0151
[ 12.312508] usb 1-5: New USB device strings: Mfr=0, Product=2, SerialNumber=3
[ 12.312515] usb 1-5: Product: USB Mass Storage Device
[ 12.312521] usb 1-5: SerialNumber: 9875c6f37f77ae
[ 12.319097] usb-storage 1-5:1.0: USB Mass Storage device detected
[ 12.319917] usb-storage 1-5:1.0: Quirks match for vid 0457 pid 0151: 80
[ 12.320061] scsi6 : usb-storage 1-5:1.0
[ 12.320342] usbcore: registered new interface driver usb-storage
[ 12.424252] usb 3-1: new high-speed USB device number 2 using ehci-pci
[ 12.560020] usb 3-1: New USB device found, idVendor=058f, idProduct=6366
[ 12.560036] usb 3-1: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[ 12.560045] usb 3-1: Product: Flash Card Reader/Writer
[ 12.560052] usb 3-1: Manufacturer: Generic
[ 12.560060] usb 3-1: SerialNumber: 058F63666485
[ 12.561571] usb-storage 3-1:1.0: USB Mass Storage device detected
[ 12.562088] scsi7 : usb-storage 3-1:1.0
[ 12.620482] Switched to clocksource tsc
[ 13.322519] scsi 6:0:0:0: Direct-Access JetFlash TS4GJF2A/120 0.00 PQ: 0 ANSI: 2
[ 13.340422] sd 6:0:0:0: [sda] 8028160 512-byte logical blocks: (4.11 GB/3.82 GiB)
[ 13.341152] sd 6:0:0:0: [sda] Write Protect is off
[ 13.341164] sd 6:0:0:0: [sda] Mode Sense: 00 00 00 00
[ 13.341877] sd 6:0:0:0: [sda] Asking for cache data failed
[ 13.341886] sd 6:0:0:0: [sda] Assuming drive cache: write through
[ 13.346104] sda: sda1
[ 13.349636] sd 6:0:0:0: [sda] Attached SCSI removable disk
[ 13.351217] sd 6:0:0:0: Attached scsi generic sg0 type 0
[ 13.561055] scsi 7:0:0:0: Direct-Access Multiple Card Reader 1.00 PQ: 0 ANSI: 4
[ 13.561888] sd 7:0:0:0: Attached scsi generic sg1 type 0
[ 13.567785] sd 7:0:0:0: [sdb] Attached SCSI removable disk
[ 13.617296] FAT-fs (sda1): utf8 is not a recommended IO charset for FAT filesystems, filesystem will be case sensitive!
[ 15.083547] random: nonblocking pool is initialized
[ 30.249807] loop: module loaded
[ 30.296555] loop0: unknown partition table
[ 33.391000] FS-Cache: Loaded
[ 33.409778] 9pnet: Installing 9P2000 support
[ 33.423868] 9p: Installing v9fs 9p2000 file system support
[ 33.423905] FS-Cache: Netfs '9p' registered for caching
[ 38.110044] systemd-udevd[614]: starting version 215
[ 38.614850] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[ 38.743859] ACPI: acpi_idle registered with cpuidle
[ 38.760245] piix4_smbus 0000:00:14.0: SMBus Host Controller at 0xb00, revision 0
[ 38.760482] piix4_smbus 0000:00:14.0: Auxiliary SMBus Host Controller at 0xb20
[ 38.804285] sp5100_tco: SP5100/SB800 TCO WatchDog Timer Driver v0.05
[ 38.804460] sp5100_tco: PCI Revision ID: 0x42
[ 38.804564] sp5100_tco: Using 0xfed80b00 for watchdog MMIO address
[ 38.804581] sp5100_tco: Last reboot was not triggered by watchdog.
[ 38.804732] sp5100_tco: initialized (0xffffc90000736b00). heartbeat=60 sec (nowayout=0)
[ 38.856315] acpi-cpufreq: overriding BIOS provided _PSD data
[ 39.018693] input: PC Speaker as /devices/platform/pcspkr/input/input2
[ 39.280492] kvm: Nested Virtualization enabled
[ 39.280507] kvm: Nested Paging enabled
[ 43.127430] r8169 0000:01:00.0 eth0: link down
[ 43.127504] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 43.131733] r8169 0000:01:00.0 eth0: link down
[ 43.271883] r8169 0000:02:00.0 eth1: link down
[ 43.271969] IPv6: ADDRCONF(NETDEV_UP): eth1: link is not ready
[ 43.411564] r8169 0000:03:00.0 eth2: link down
[ 43.411644] IPv6: ADDRCONF(NETDEV_UP): eth2: link is not ready
[ 43.870999] RPC: Registered named UNIX socket transport module.
[ 43.871013] RPC: Registered udp transport module.
[ 43.871018] RPC: Registered tcp transport module.
[ 43.871022] RPC: Registered tcp NFSv4.1 backchannel transport module.
[ 43.939557] FS-Cache: Netfs 'nfs' registered for caching
[ 44.065218] Installing knfsd (copyright (C) 1996 okir@monad.swb.de).
[ 45.325256] r8169 0000:01:00.0 eth0: link up
[ 45.325285] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
[ 50.693378] fuse init (API version 7.23)
[ 50.761479] ipmi message handler version 39.2