blob: 7770efd485b01992a13d66ae6a19a4632b5026f7 [file] [log] [blame]
[ 0.000000] Linux version 4.9.0-3-amd64 (debian-kernel@lists.debian.org) (gcc version 6.3.0 20170516 (Debian 6.3.0-18) ) #1 SMP Debian 4.9.30-2+deb9u2 (2017-06-26)
[ 0.000000] Command line: BOOT_IMAGE=/vmlinuz-4.9.0-3-amd64 root=UUID=ccc056d2-8f7f-43b6-9f6f-79128a192d70 ro iomem=relaxed quiet
[ 0.000000] x86/fpu: Supporting XSAVE feature 0x001: 'x87 floating point registers'
[ 0.000000] x86/fpu: Supporting XSAVE feature 0x002: 'SSE registers'
[ 0.000000] x86/fpu: Supporting XSAVE feature 0x004: 'AVX registers'
[ 0.000000] x86/fpu: xstate_offset[2]: 576, xstate_sizes[2]: 256
[ 0.000000] x86/fpu: Enabled xstate features 0x7, context size is 832 bytes, using 'standard' format.
[ 0.000000] x86/fpu: Using 'eager' FPU context switches.
[ 0.000000] e820: BIOS-provided physical RAM map:
[ 0.000000] BIOS-e820: [mem 0x0000000000000000-0x0000000000000fff] type 16
[ 0.000000] BIOS-e820: [mem 0x0000000000001000-0x000000000009ffff] usable
[ 0.000000] BIOS-e820: [mem 0x00000000000a0000-0x00000000000fffff] reserved
[ 0.000000] BIOS-e820: [mem 0x0000000000100000-0x000000007ff00fff] usable
[ 0.000000] BIOS-e820: [mem 0x000000007ff01000-0x000000007fffffff] type 16
[ 0.000000] BIOS-e820: [mem 0x0000000080000000-0x00000000829fffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000f8000000-0x00000000fbffffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fed40000-0x00000000fed44fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fed90000-0x00000000fed91fff] reserved
[ 0.000000] BIOS-e820: [mem 0x0000000100000000-0x000000087b5fffff] usable
[ 0.000000] NX (Execute Disable) protection: active
[ 0.000000] SMBIOS 2.7 present.
[ 0.000000] DMI: GIGABYTE GA-B75M-D3H/GA-B75M-D3H, BIOS 4.6-824-g41114650d0 07/23/2017
[ 0.000000] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
[ 0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable
[ 0.000000] e820: last_pfn = 0x87b600 max_arch_pfn = 0x400000000
[ 0.000000] MTRR default type: write-back
[ 0.000000] MTRR fixed ranges enabled:
[ 0.000000] 00000-9FFFF write-back
[ 0.000000] A0000-BFFFF uncachable
[ 0.000000] C0000-FFFFF write-back
[ 0.000000] MTRR variable ranges enabled:
[ 0.000000] 0 base 080000000 mask FC0000000 uncachable
[ 0.000000] 1 base 0C0000000 mask FE0000000 uncachable
[ 0.000000] 2 base 0E0000000 mask FF0000000 write-combining
[ 0.000000] 3 base 0F0000000 mask FF0000000 uncachable
[ 0.000000] 4 disabled
[ 0.000000] 5 disabled
[ 0.000000] 6 disabled
[ 0.000000] 7 disabled
[ 0.000000] 8 disabled
[ 0.000000] 9 disabled
[ 0.000000] x86/PAT: Configuration [0-7]: WB WC UC- UC WB WC UC- WT
[ 0.000000] e820: last_pfn = 0x7ff01 max_arch_pfn = 0x400000000
[ 0.000000] Base memory trampoline at [ffff88fb40099000] 99000 size 24576
[ 0.000000] BRK [0x0e72e000, 0x0e72efff] PGTABLE
[ 0.000000] BRK [0x0e72f000, 0x0e72ffff] PGTABLE
[ 0.000000] BRK [0x0e730000, 0x0e730fff] PGTABLE
[ 0.000000] BRK [0x0e731000, 0x0e731fff] PGTABLE
[ 0.000000] BRK [0x0e732000, 0x0e732fff] PGTABLE
[ 0.000000] BRK [0x0e733000, 0x0e733fff] PGTABLE
[ 0.000000] BRK [0x0e734000, 0x0e734fff] PGTABLE
[ 0.000000] BRK [0x0e735000, 0x0e735fff] PGTABLE
[ 0.000000] BRK [0x0e736000, 0x0e736fff] PGTABLE
[ 0.000000] BRK [0x0e737000, 0x0e737fff] PGTABLE
[ 0.000000] BRK [0x0e738000, 0x0e738fff] PGTABLE
[ 0.000000] BRK [0x0e739000, 0x0e739fff] PGTABLE
[ 0.000000] RAMDISK: [mem 0x35d15000-0x36e81fff]
[ 0.000000] ACPI: Early table checksum verification disabled
[ 0.000000] ACPI: RSDP 0x00000000000F0000 000024 (v02 CORE )
[ 0.000000] ACPI: XSDT 0x000000007FF130E0 000054 (v01 CORE COREBOOT 00000000 CORE 00000000)
[ 0.000000] ACPI: FACP 0x000000007FF15A80 0000F4 (v04 CORE COREBOOT 00000000 CORE 00000000)
[ 0.000000] ACPI: DSDT 0x000000007FF13280 0027F7 (v03 COREv4 COREBOOT 20141018 INTL 20161222)
[ 0.000000] ACPI: FACS 0x000000007FF13240 000040
[ 0.000000] ACPI: FACS 0x000000007FF13240 000040
[ 0.000000] ACPI: SSDT 0x000000007FF15B80 00294E (v02 CORE COREBOOT 0000002A CORE 0000002A)
[ 0.000000] ACPI: TCPA 0x000000007FF184D0 000032 (v02 CORE COREBOOT 00000000 CORE 00000000)
[ 0.000000] ACPI: APIC 0x000000007FF18510 00008C (v01 CORE COREBOOT 00000000 CORE 00000000)
[ 0.000000] ACPI: DMAR 0x000000007FF185A0 0000A8 (v01 CORE COREBOOT 00000000 CORE 00000000)
[ 0.000000] ACPI: HPET 0x000000007FF18650 000038 (v01 CORE COREBOOT 00000000 CORE 00000000)
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] No NUMA configuration found
[ 0.000000] Faking a node at [mem 0x0000000000000000-0x000000087b5fffff]
[ 0.000000] NODE_DATA(0) allocated [mem 0x87b5e2000-0x87b5e6fff]
[ 0.000000] Zone ranges:
[ 0.000000] DMA [mem 0x0000000000001000-0x0000000000ffffff]
[ 0.000000] DMA32 [mem 0x0000000001000000-0x00000000ffffffff]
[ 0.000000] Normal [mem 0x0000000100000000-0x000000087b5fffff]
[ 0.000000] Device empty
[ 0.000000] Movable zone start for each node
[ 0.000000] Early memory node ranges
[ 0.000000] node 0: [mem 0x0000000000001000-0x000000000009ffff]
[ 0.000000] node 0: [mem 0x0000000000100000-0x000000007ff00fff]
[ 0.000000] node 0: [mem 0x0000000100000000-0x000000087b5fffff]
[ 0.000000] Initmem setup node 0 [mem 0x0000000000001000-0x000000087b5fffff]
[ 0.000000] On node 0 totalpages: 8369312
[ 0.000000] DMA zone: 64 pages used for memmap
[ 0.000000] DMA zone: 22 pages reserved
[ 0.000000] DMA zone: 3999 pages, LIFO batch:0
[ 0.000000] DMA32 zone: 8125 pages used for memmap
[ 0.000000] DMA32 zone: 519937 pages, LIFO batch:31
[ 0.000000] Normal zone: 122584 pages used for memmap
[ 0.000000] Normal zone: 7845376 pages, LIFO batch:31
[ 0.000000] Reserving Intel graphics memory at 0x0000000080a00000-0x00000000829fffff
[ 0.000000] ACPI: PM-Timer IO Port: 0x508
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-23
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[ 0.000000] ACPI: IRQ0 used by override.
[ 0.000000] ACPI: IRQ9 used by override.
[ 0.000000] Using ACPI (MADT) for SMP configuration information
[ 0.000000] ACPI: HPET id: 0x8086a701 base: 0xfed00000
[ 0.000000] smpboot: Allowing 8 CPUs, 0 hotplug CPUs
[ 0.000000] PM: Registered nosave memory: [mem 0x00000000-0x00000fff]
[ 0.000000] PM: Registered nosave memory: [mem 0x000a0000-0x000fffff]
[ 0.000000] PM: Registered nosave memory: [mem 0x7ff01000-0x7fffffff]
[ 0.000000] PM: Registered nosave memory: [mem 0x80000000-0x829fffff]
[ 0.000000] PM: Registered nosave memory: [mem 0x82a00000-0xf7ffffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xf8000000-0xfbffffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfc000000-0xfed3ffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfed40000-0xfed44fff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfed45000-0xfed8ffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfed90000-0xfed91fff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfed92000-0xffffffff]
[ 0.000000] e820: [mem 0x82a00000-0xf7ffffff] available for PCI devices
[ 0.000000] Booting paravirtualized kernel on bare hardware
[ 0.000000] clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645519600211568 ns
[ 0.000000] setup_percpu: NR_CPUS:512 nr_cpumask_bits:512 nr_cpu_ids:8 nr_node_ids:1
[ 0.000000] percpu: Embedded 35 pages/cpu @ffff8903bb200000 s103512 r8192 d31656 u262144
[ 0.000000] pcpu-alloc: s103512 r8192 d31656 u262144 alloc=1*2097152
[ 0.000000] pcpu-alloc: [0] 0 1 2 3 4 5 6 7
[ 0.000000] Built 1 zonelists in Node order, mobility grouping on. Total pages: 8238517
[ 0.000000] Policy zone: Normal
[ 0.000000] Kernel command line: BOOT_IMAGE=/vmlinuz-4.9.0-3-amd64 root=UUID=ccc056d2-8f7f-43b6-9f6f-79128a192d70 ro iomem=relaxed quiet
[ 0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes)
[ 0.000000] Calgary: detecting Calgary via BIOS EBDA area
[ 0.000000] Calgary: Unable to locate Rio Grande table in EBDA - bailing!
[ 0.000000] Memory: 32852172K/33477248K available (6187K kernel code, 1137K rwdata, 2856K rodata, 1392K init, 688K bss, 625076K reserved, 0K cma-reserved)
[ 0.000000] Hierarchical RCU implementation.
[ 0.000000] Build-time adjustment of leaf fanout to 64.
[ 0.000000] RCU restricting CPUs from NR_CPUS=512 to nr_cpu_ids=8.
[ 0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=64, nr_cpu_ids=8
[ 0.000000] NR_IRQS:33024 nr_irqs:488 16
[ 0.000000] Console: colour dummy device 80x25
[ 0.000000] console [tty0] enabled
[ 0.000000] clocksource: hpet: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 133484882848 ns
[ 0.000000] hpet clockevent registered
[ 0.000000] tsc: Fast TSC calibration using PIT
[ 0.000000] tsc: Detected 2494.390 MHz processor
[ 0.000026] Calibrating delay loop (skipped), value calculated using timer frequency.. 4988.78 BogoMIPS (lpj=9977560)
[ 0.000029] pid_max: default: 32768 minimum: 301
[ 0.000045] ACPI: Core revision 20160831
[ 0.002208] ACPI: 2 ACPI AML tables successfully acquired and loaded
[ 0.002256] Security Framework initialized
[ 0.002257] Yama: disabled by default; enable with sysctl kernel.yama.*
[ 0.002262] AppArmor: AppArmor disabled by boot time parameter
[ 0.003783] Dentry cache hash table entries: 4194304 (order: 13, 33554432 bytes)
[ 0.011382] Inode-cache hash table entries: 2097152 (order: 12, 16777216 bytes)
[ 0.014836] Mount-cache hash table entries: 65536 (order: 7, 524288 bytes)
[ 0.014862] Mountpoint-cache hash table entries: 65536 (order: 7, 524288 bytes)
[ 0.015205] CPU: Physical Processor ID: 0
[ 0.015205] CPU: Processor Core ID: 0
[ 0.015212] mce: CPU supports 9 MCE banks
[ 0.015224] mce: [Hardware Error]: Machine check events logged
[ 0.015229] CPU0: Thermal monitoring enabled (TM1)
[ 0.015239] process: using mwait in idle threads
[ 0.015241] Last level iTLB entries: 4KB 512, 2MB 8, 4MB 8
[ 0.015242] Last level dTLB entries: 4KB 512, 2MB 32, 4MB 32, 1GB 0
[ 0.015642] Freeing SMP alternatives memory: 24K (ffffffffa927a000 - ffffffffa9280000)
[ 0.017825] ftrace: allocating 25178 entries in 99 pages
[ 0.028960] smpboot: Max logical packages: 2
[ 0.028963] DMAR: Host address width 36
[ 0.028965] DMAR: DRHD base: 0x000000fed90000 flags: 0x0
[ 0.028972] DMAR: dmar0: reg_base_addr fed90000 ver 1:0 cap c0000020e60262 ecap f0101a
[ 0.028972] DMAR: DRHD base: 0x000000fed91000 flags: 0x1
[ 0.028976] DMAR: dmar1: reg_base_addr fed91000 ver 1:0 cap c9008020660262 ecap f0105a
[ 0.028977] DMAR-IR: IOAPIC id 2 under DRHD base 0xfed91000 IOMMU 1
[ 0.028978] DMAR-IR: HPET id 0 under DRHD base 0xfed91000
[ 0.028979] DMAR-IR: Queued invalidation will be enabled to support x2apic and Intr-remapping.
[ 0.029250] DMAR-IR: Enabled IRQ remapping in x2apic mode
[ 0.029251] x2apic enabled
[ 0.029255] Switched APIC routing to cluster x2apic.
[ 0.029712] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[ 0.069401] TSC deadline timer enabled
[ 0.069404] smpboot: CPU0: Intel(R) Core(TM) i7-3770T CPU @ 2.50GHz (family: 0x6, model: 0x3a, stepping: 0x9)
[ 0.069407] Performance Events: PEBS fmt1+, IvyBridge events, 16-deep LBR, full-width counters, Intel PMU driver.
[ 0.069431] ... version: 3
[ 0.069432] ... bit width: 48
[ 0.069432] ... generic registers: 4
[ 0.069433] ... value mask: 0000ffffffffffff
[ 0.069433] ... max period: 00007fffffffffff
[ 0.069433] ... fixed-purpose events: 3
[ 0.069434] ... event mask: 000000070000000f
[ 0.070018] NMI watchdog: enabled on all CPUs, permanently consumes one hw-PMU counter.
[ 0.070117] x86: Booting SMP configuration:
[ 0.070118] .... node #0, CPUs: #1 #2 #3 #4 #5 #6 #7
[ 0.631632] x86: Booted up 1 node, 8 CPUs
[ 0.631634] smpboot: Total of 8 processors activated (39917.80 BogoMIPS)
[ 0.640375] devtmpfs: initialized
[ 0.640439] x86/mm: Memory block size: 128MB
[ 0.645531] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns
[ 0.645544] futex hash table entries: 2048 (order: 5, 131072 bytes)
[ 0.645598] pinctrl core: initialized pinctrl subsystem
[ 0.645708] NET: Registered protocol family 16
[ 0.659560] cpuidle: using governor ladder
[ 0.675568] cpuidle: using governor menu
[ 0.675614] ACPI: bus type PCI registered
[ 0.675615] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
[ 0.675676] PCI: Using configuration type 1 for base access
[ 0.675728] core: PMU erratum BJ122, BV98, HSD29 worked around, HT is on
[ 0.691703] HugeTLB registered 2 MB page size, pre-allocated 0 pages
[ 0.691941] ACPI: Added _OSI(Module Device)
[ 0.691942] ACPI: Added _OSI(Processor Device)
[ 0.691943] ACPI: Added _OSI(3.0 _SCP Extensions)
[ 0.691943] ACPI: Added _OSI(Processor Aggregator Device)
[ 0.692074] ACPI: Executed 1 blocks of module-level executable AML code
[ 0.694340] ACPI: Interpreter enabled
[ 0.694355] ACPI: (supports S0 S3 S4 S5)
[ 0.694355] ACPI: Using IOAPIC for interrupt routing
[ 0.694377] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
[ 0.697016] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
[ 0.697020] acpi PNP0A08:00: _OSC: OS supports [ASPM ClockPM Segments MSI]
[ 0.697038] acpi PNP0A08:00: _OSC: not requesting OS control; OS requires [ExtendedConfig ASPM ClockPM MSI]
[ 0.697046] acpi PNP0A08:00: fail to add MMCONFIG information, can't access extended PCI configuration space under this bridge.
[ 0.697230] PCI host bridge to bus 0000:00
[ 0.697232] pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7 window]
[ 0.697233] pci_bus 0000:00: root bus resource [io 0x0d00-0xffff window]
[ 0.697234] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff window]
[ 0.697235] pci_bus 0000:00: root bus resource [mem 0x000c0000-0x000c3fff window]
[ 0.697236] pci_bus 0000:00: root bus resource [mem 0x000c4000-0x000c7fff window]
[ 0.697237] pci_bus 0000:00: root bus resource [mem 0x000c8000-0x000cbfff window]
[ 0.697238] pci_bus 0000:00: root bus resource [mem 0x000cc000-0x000cffff window]
[ 0.697239] pci_bus 0000:00: root bus resource [mem 0x000d0000-0x000d3fff window]
[ 0.697240] pci_bus 0000:00: root bus resource [mem 0x000d4000-0x000d7fff window]
[ 0.697242] pci_bus 0000:00: root bus resource [mem 0x000d8000-0x000dbfff window]
[ 0.697243] pci_bus 0000:00: root bus resource [mem 0x000dc000-0x000dffff window]
[ 0.697244] pci_bus 0000:00: root bus resource [mem 0x000e0000-0x000e3fff window]
[ 0.697245] pci_bus 0000:00: root bus resource [mem 0x000e4000-0x000e7fff window]
[ 0.697246] pci_bus 0000:00: root bus resource [mem 0x000e8000-0x000ebfff window]
[ 0.697247] pci_bus 0000:00: root bus resource [mem 0x000ec000-0x000effff window]
[ 0.697248] pci_bus 0000:00: root bus resource [mem 0x000f0000-0x000fffff window]
[ 0.697249] pci_bus 0000:00: root bus resource [mem 0x82a00000-0xf7ffffff window]
[ 0.697250] pci_bus 0000:00: root bus resource [mem 0xfed40000-0xfed44fff window]
[ 0.697251] pci_bus 0000:00: root bus resource [bus 00-ff]
[ 0.697258] pci 0000:00:00.0: [8086:0150] type 00 class 0x060000
[ 0.697342] pci 0000:00:01.0: [8086:0151] type 01 class 0x060400
[ 0.697368] pci 0000:00:01.0: PME# supported from D0 D3hot D3cold
[ 0.697431] pci 0000:00:02.0: [8086:0162] type 00 class 0x030000
[ 0.697440] pci 0000:00:02.0: reg 0x10: [mem 0xf0000000-0xf03fffff 64bit]
[ 0.697446] pci 0000:00:02.0: reg 0x18: [mem 0xe0000000-0xefffffff 64bit pref]
[ 0.697450] pci 0000:00:02.0: reg 0x20: [io 0x2000-0x203f]
[ 0.697545] pci 0000:00:14.0: [8086:1e31] type 00 class 0x0c0330
[ 0.697565] pci 0000:00:14.0: reg 0x10: [mem 0xf0600000-0xf060ffff 64bit]
[ 0.697634] pci 0000:00:14.0: PME# supported from D3hot D3cold
[ 0.697668] pci 0000:00:14.0: System wakeup disabled by ACPI
[ 0.697736] pci 0000:00:16.0: [8086:1e3a] type 00 class 0x078000
[ 0.697814] pci 0000:00:16.0: reg 0x10: [mem 0xf0618000-0xf061800f 64bit]
[ 0.698149] pci 0000:00:16.0: PME# supported from D0 D3hot D3cold
[ 0.698247] pci 0000:00:1a.0: [8086:1e2d] type 00 class 0x0c0320
[ 0.698264] pci 0000:00:1a.0: reg 0x10: [mem 0xf0615000-0xf06153ff]
[ 0.698347] pci 0000:00:1a.0: PME# supported from D0 D3hot D3cold
[ 0.698381] pci 0000:00:1a.0: System wakeup disabled by ACPI
[ 0.698422] pci 0000:00:1b.0: [8086:1e20] type 00 class 0x040300
[ 0.698436] pci 0000:00:1b.0: reg 0x10: [mem 0xf0610000-0xf0613fff 64bit]
[ 0.698500] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
[ 0.698536] pci 0000:00:1b.0: System wakeup disabled by ACPI
[ 0.698574] pci 0000:00:1c.0: [8086:1e10] type 01 class 0x060400
[ 0.698643] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
[ 0.698716] pci 0000:00:1c.4: [8086:1e18] type 01 class 0x060400
[ 0.698785] pci 0000:00:1c.4: PME# supported from D0 D3hot D3cold
[ 0.698860] pci 0000:00:1d.0: [8086:1e26] type 00 class 0x0c0320
[ 0.698878] pci 0000:00:1d.0: reg 0x10: [mem 0xf0616000-0xf06163ff]
[ 0.698962] pci 0000:00:1d.0: PME# supported from D0 D3hot D3cold
[ 0.698997] pci 0000:00:1d.0: System wakeup disabled by ACPI
[ 0.699033] pci 0000:00:1e.0: [8086:244e] type 01 class 0x060401
[ 0.699130] pci 0000:00:1f.0: [8086:1e49] type 00 class 0x060100
[ 0.699293] pci 0000:00:1f.2: [8086:1e02] type 00 class 0x010601
[ 0.699309] pci 0000:00:1f.2: reg 0x10: [io 0x2060-0x2067]
[ 0.699317] pci 0000:00:1f.2: reg 0x14: [io 0x2070-0x2073]
[ 0.699326] pci 0000:00:1f.2: reg 0x18: [io 0x2068-0x206f]
[ 0.699334] pci 0000:00:1f.2: reg 0x1c: [io 0x2074-0x2077]
[ 0.699342] pci 0000:00:1f.2: reg 0x20: [io 0x2040-0x205f]
[ 0.699350] pci 0000:00:1f.2: reg 0x24: [mem 0xf0614000-0xf06147ff]
[ 0.699395] pci 0000:00:1f.2: PME# supported from D3hot
[ 0.699460] pci 0000:00:1f.3: [8086:1e22] type 00 class 0x0c0500
[ 0.699475] pci 0000:00:1f.3: reg 0x10: [mem 0xf0617000-0xf06170ff 64bit]
[ 0.699496] pci 0000:00:1f.3: reg 0x20: [io 0x0400-0x041f]
[ 0.699604] pci 0000:00:01.0: PCI bridge to [bus 01]
[ 0.699671] pci 0000:02:00.0: [168c:002a] type 00 class 0x028000
[ 0.699697] pci 0000:02:00.0: reg 0x10: [mem 0xf0400000-0xf040ffff 64bit]
[ 0.699836] pci 0000:02:00.0: supports D1
[ 0.699837] pci 0000:02:00.0: PME# supported from D0 D1 D3hot
[ 0.699885] pci 0000:02:00.0: disabling ASPM on pre-1.1 PCIe device. You can enable it with 'pcie_aspm=force'
[ 0.699896] pci 0000:00:1c.0: PCI bridge to [bus 02]
[ 0.699901] pci 0000:00:1c.0: bridge window [mem 0xf0400000-0xf04fffff]
[ 0.699968] pci 0000:03:00.0: [10ec:8168] type 00 class 0x020000
[ 0.699986] pci 0000:03:00.0: reg 0x10: [io 0x1000-0x10ff]
[ 0.700019] pci 0000:03:00.0: reg 0x18: [mem 0xf0504000-0xf0504fff 64bit pref]
[ 0.700041] pci 0000:03:00.0: reg 0x20: [mem 0xf0500000-0xf0503fff 64bit pref]
[ 0.700131] pci 0000:03:00.0: supports D1 D2
[ 0.700132] pci 0000:03:00.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.715601] pci 0000:00:1c.4: PCI bridge to [bus 03]
[ 0.715605] pci 0000:00:1c.4: bridge window [io 0x1000-0x1fff]
[ 0.715627] pci 0000:00:1c.4: bridge window [mem 0xf0500000-0xf05fffff 64bit pref]
[ 0.715695] pci 0000:00:1e.0: PCI bridge to [bus 04] (subtractive decode)
[ 0.715704] pci 0000:00:1e.0: bridge window [io 0x0000-0x0cf7 window] (subtractive decode)
[ 0.715706] pci 0000:00:1e.0: bridge window [io 0x0d00-0xffff window] (subtractive decode)
[ 0.715707] pci 0000:00:1e.0: bridge window [mem 0x000a0000-0x000bffff window] (subtractive decode)
[ 0.715708] pci 0000:00:1e.0: bridge window [mem 0x000c0000-0x000c3fff window] (subtractive decode)
[ 0.715709] pci 0000:00:1e.0: bridge window [mem 0x000c4000-0x000c7fff window] (subtractive decode)
[ 0.715710] pci 0000:00:1e.0: bridge window [mem 0x000c8000-0x000cbfff window] (subtractive decode)
[ 0.715711] pci 0000:00:1e.0: bridge window [mem 0x000cc000-0x000cffff window] (subtractive decode)
[ 0.715712] pci 0000:00:1e.0: bridge window [mem 0x000d0000-0x000d3fff window] (subtractive decode)
[ 0.715713] pci 0000:00:1e.0: bridge window [mem 0x000d4000-0x000d7fff window] (subtractive decode)
[ 0.715714] pci 0000:00:1e.0: bridge window [mem 0x000d8000-0x000dbfff window] (subtractive decode)
[ 0.715715] pci 0000:00:1e.0: bridge window [mem 0x000dc000-0x000dffff window] (subtractive decode)
[ 0.715717] pci 0000:00:1e.0: bridge window [mem 0x000e0000-0x000e3fff window] (subtractive decode)
[ 0.715718] pci 0000:00:1e.0: bridge window [mem 0x000e4000-0x000e7fff window] (subtractive decode)
[ 0.715719] pci 0000:00:1e.0: bridge window [mem 0x000e8000-0x000ebfff window] (subtractive decode)
[ 0.715720] pci 0000:00:1e.0: bridge window [mem 0x000ec000-0x000effff window] (subtractive decode)
[ 0.715722] pci 0000:00:1e.0: bridge window [mem 0x000f0000-0x000fffff window] (subtractive decode)
[ 0.715723] pci 0000:00:1e.0: bridge window [mem 0x82a00000-0xf7ffffff window] (subtractive decode)
[ 0.715724] pci 0000:00:1e.0: bridge window [mem 0xfed40000-0xfed44fff window] (subtractive decode)
[ 0.715828] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 10 12 14 15) *11
[ 0.715873] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 *11 12 14 15)
[ 0.715916] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 7 10 12 14 15) *11
[ 0.715958] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 *11 12 14 15)
[ 0.716000] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 10 12 14 15) *11
[ 0.716041] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 *11 12 14 15)
[ 0.716083] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 7 10 12 14 15) *11
[ 0.716125] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 7 *11 12 14 15)
[ 0.716422] vgaarb: setting as boot device: PCI:0000:00:02.0
[ 0.716424] vgaarb: device added: PCI:0000:00:02.0,decodes=io+mem,owns=io+mem,locks=none
[ 0.716426] vgaarb: loaded
[ 0.716426] vgaarb: bridge control possible 0000:00:02.0
[ 0.716484] PCI: Using ACPI for IRQ routing
[ 0.716485] PCI: pci_cache_line_size set to 64 bytes
[ 0.716541] e820: reserve RAM buffer [mem 0x7ff01000-0x7fffffff]
[ 0.716542] e820: reserve RAM buffer [mem 0x87b600000-0x87bffffff]
[ 0.716677] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0, 0, 0, 0, 0
[ 0.716681] hpet0: 8 comparators, 64-bit 14.318180 MHz counter
[ 0.718701] clocksource: Switched to clocksource hpet
[ 0.724689] VFS: Disk quotas dquot_6.6.0
[ 0.724713] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[ 0.724784] pnp: PnP ACPI init
[ 0.724859] system 00:00: [mem 0xfed1c000-0xfed1ffff] has been reserved
[ 0.724860] system 00:00: [mem 0xfed10000-0xfed17fff] has been reserved
[ 0.724861] system 00:00: [mem 0xfed18000-0xfed18fff] has been reserved
[ 0.724863] system 00:00: [mem 0xfed19000-0xfed19fff] has been reserved
[ 0.724864] system 00:00: [mem 0xf8000000-0xfbffffff] has been reserved
[ 0.724865] system 00:00: [mem 0xfed20000-0xfed3ffff] has been reserved
[ 0.724866] system 00:00: [mem 0xfed40000-0xfed44fff] has been reserved
[ 0.724868] system 00:00: [mem 0xfed45000-0xfed8ffff] has been reserved
[ 0.724869] system 00:00: [mem 0x20000000-0x201fffff] could not be reserved
[ 0.724870] system 00:00: [mem 0x40000000-0x401fffff] could not be reserved
[ 0.724873] system 00:00: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.725063] system 00:01: [mem 0xfed00000-0xfed003ff] has been reserved
[ 0.725066] system 00:01: Plug and Play ACPI device, IDs PNP0103 PNP0c01 (active)
[ 0.725100] system 00:02: [io 0x0500-0x057f] has been reserved
[ 0.725101] system 00:02: [io 0x0480-0x04bf] has been reserved
[ 0.725103] system 00:02: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.725123] pnp 00:03: Plug and Play ACPI device, IDs PNP0b00 (active)
[ 0.725149] pnp 00:04: Plug and Play ACPI device, IDs PNP0c31 (active)
[ 0.725167] pnp: PnP ACPI: found 5 devices
[ 0.731405] clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns
[ 0.731436] pci 0000:00:01.0: PCI bridge to [bus 01]
[ 0.731442] pci 0000:00:1c.0: PCI bridge to [bus 02]
[ 0.731447] pci 0000:00:1c.0: bridge window [mem 0xf0400000-0xf04fffff]
[ 0.731455] pci 0000:00:1c.4: PCI bridge to [bus 03]
[ 0.731457] pci 0000:00:1c.4: bridge window [io 0x1000-0x1fff]
[ 0.731464] pci 0000:00:1c.4: bridge window [mem 0xf0500000-0xf05fffff 64bit pref]
[ 0.731470] pci 0000:00:1e.0: PCI bridge to [bus 04]
[ 0.731481] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7 window]
[ 0.731482] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff window]
[ 0.731483] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff window]
[ 0.731484] pci_bus 0000:00: resource 7 [mem 0x000c0000-0x000c3fff window]
[ 0.731485] pci_bus 0000:00: resource 8 [mem 0x000c4000-0x000c7fff window]
[ 0.731486] pci_bus 0000:00: resource 9 [mem 0x000c8000-0x000cbfff window]
[ 0.731487] pci_bus 0000:00: resource 10 [mem 0x000cc000-0x000cffff window]
[ 0.731488] pci_bus 0000:00: resource 11 [mem 0x000d0000-0x000d3fff window]
[ 0.731489] pci_bus 0000:00: resource 12 [mem 0x000d4000-0x000d7fff window]
[ 0.731490] pci_bus 0000:00: resource 13 [mem 0x000d8000-0x000dbfff window]
[ 0.731491] pci_bus 0000:00: resource 14 [mem 0x000dc000-0x000dffff window]
[ 0.731492] pci_bus 0000:00: resource 15 [mem 0x000e0000-0x000e3fff window]
[ 0.731493] pci_bus 0000:00: resource 16 [mem 0x000e4000-0x000e7fff window]
[ 0.731494] pci_bus 0000:00: resource 17 [mem 0x000e8000-0x000ebfff window]
[ 0.731495] pci_bus 0000:00: resource 18 [mem 0x000ec000-0x000effff window]
[ 0.731496] pci_bus 0000:00: resource 19 [mem 0x000f0000-0x000fffff window]
[ 0.731497] pci_bus 0000:00: resource 20 [mem 0x82a00000-0xf7ffffff window]
[ 0.731498] pci_bus 0000:00: resource 21 [mem 0xfed40000-0xfed44fff window]
[ 0.731500] pci_bus 0000:02: resource 1 [mem 0xf0400000-0xf04fffff]
[ 0.731501] pci_bus 0000:03: resource 0 [io 0x1000-0x1fff]
[ 0.731502] pci_bus 0000:03: resource 2 [mem 0xf0500000-0xf05fffff 64bit pref]
[ 0.731503] pci_bus 0000:04: resource 4 [io 0x0000-0x0cf7 window]
[ 0.731504] pci_bus 0000:04: resource 5 [io 0x0d00-0xffff window]
[ 0.731505] pci_bus 0000:04: resource 6 [mem 0x000a0000-0x000bffff window]
[ 0.731506] pci_bus 0000:04: resource 7 [mem 0x000c0000-0x000c3fff window]
[ 0.731507] pci_bus 0000:04: resource 8 [mem 0x000c4000-0x000c7fff window]
[ 0.731508] pci_bus 0000:04: resource 9 [mem 0x000c8000-0x000cbfff window]
[ 0.731509] pci_bus 0000:04: resource 10 [mem 0x000cc000-0x000cffff window]
[ 0.731510] pci_bus 0000:04: resource 11 [mem 0x000d0000-0x000d3fff window]
[ 0.731511] pci_bus 0000:04: resource 12 [mem 0x000d4000-0x000d7fff window]
[ 0.731512] pci_bus 0000:04: resource 13 [mem 0x000d8000-0x000dbfff window]
[ 0.731513] pci_bus 0000:04: resource 14 [mem 0x000dc000-0x000dffff window]
[ 0.731514] pci_bus 0000:04: resource 15 [mem 0x000e0000-0x000e3fff window]
[ 0.731515] pci_bus 0000:04: resource 16 [mem 0x000e4000-0x000e7fff window]
[ 0.731516] pci_bus 0000:04: resource 17 [mem 0x000e8000-0x000ebfff window]
[ 0.731517] pci_bus 0000:04: resource 18 [mem 0x000ec000-0x000effff window]
[ 0.731518] pci_bus 0000:04: resource 19 [mem 0x000f0000-0x000fffff window]
[ 0.731519] pci_bus 0000:04: resource 20 [mem 0x82a00000-0xf7ffffff window]
[ 0.731520] pci_bus 0000:04: resource 21 [mem 0xfed40000-0xfed44fff window]
[ 0.731603] NET: Registered protocol family 2
[ 0.731823] TCP established hash table entries: 262144 (order: 9, 2097152 bytes)
[ 0.732182] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
[ 0.732296] TCP: Hash tables configured (established 262144 bind 65536)
[ 0.732328] UDP hash table entries: 16384 (order: 7, 524288 bytes)
[ 0.732407] UDP-Lite hash table entries: 16384 (order: 7, 524288 bytes)
[ 0.732516] NET: Registered protocol family 1
[ 0.732529] pci 0000:00:02.0: Video device with shadowed ROM at [mem 0x000c0000-0x000dffff]
[ 0.733092] PCI: CLS 64 bytes, default 64
[ 0.733135] Unpacking initramfs...
[ 1.033500] Freeing initrd memory: 17844K (ffff88fb75d15000 - ffff88fb76e82000)
[ 1.033548] PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
[ 1.033550] software IO TLB [mem 0x7bf01000-0x7ff01000] (64MB) mapped at [ffff88fbbbf01000-ffff88fbbff00fff]
[ 1.033957] audit: initializing netlink subsys (disabled)
[ 1.033975] audit: type=2000 audit(1501128421.028:1): initialized
[ 1.034364] workingset: timestamp_bits=40 max_order=23 bucket_order=0
[ 1.034442] zbud: loaded
[ 1.035112] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 250)
[ 1.035140] io scheduler noop registered
[ 1.035141] io scheduler deadline registered
[ 1.035153] io scheduler cfq registered (default)
[ 1.035585] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[ 1.035589] pciehp: PCI Express Hot Plug Controller Driver version: 0.4
[ 1.035601] efifb: probing for efifb
[ 1.035613] efifb: framebuffer at 0xe0000000, using 4224k, total 4224k
[ 1.035614] efifb: mode is 1360x768x32, linelength=5632, pages=1
[ 1.035614] efifb: scrolling: redraw
[ 1.035615] efifb: Truecolor: size=8:8:8:8, shift=24:16:8:0
[ 1.037905] Console: switching to colour frame buffer device 170x48
[ 1.040099] fb0: EFI VGA frame buffer device
[ 1.040106] intel_idle: MWAIT substates: 0x1120
[ 1.040107] intel_idle: v0.4.1 model 0x3A
[ 1.040354] intel_idle: lapic_timer_reliable_states 0xffffffff
[ 1.041064] GHES: HEST is not enabled!
[ 1.041121] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
[ 1.061633] serial8250: ttyS0 at I/O 0x3f8 (irq = 4, base_baud = 115200) is a 16550A
[ 1.062086] Linux agpgart interface v0.103
[ 1.138747] tpm_tis 00:04: 2.0 TPM (device-id 0x1A, rev-id 16)
[ 1.218745] tpm tpm0: A TPM error (256) occurred continue selftest
[ 1.666970] AMD IOMMUv2 driver by Joerg Roedel <jroedel@suse.de>
[ 1.666970] AMD IOMMUv2 functionality not available on this system
[ 1.667654] i8042: PNP: No PS/2 controller found. Probing ports directly.
[ 1.668209] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 1.668214] serio: i8042 AUX port at 0x60,0x64 irq 12
[ 1.668490] mousedev: PS/2 mouse device common for all mice
[ 1.668542] rtc_cmos 00:03: RTC can wake from S4
[ 1.668726] rtc_cmos 00:03: rtc core: registered rtc_cmos as rtc0
[ 1.668760] rtc_cmos 00:03: alarms up to one month, 242 bytes nvram, hpet irqs
[ 1.668769] intel_pstate: Intel P-state driver initializing
[ 1.669472] ledtrig-cpu: registered to indicate activity on CPUs
[ 1.669817] NET: Registered protocol family 10
[ 1.670191] mip6: Mobile IPv6
[ 1.670193] NET: Registered protocol family 17
[ 1.670195] mpls_gso: MPLS GSO support
[ 1.670594] microcode: sig=0x306a9, pf=0x2, revision=0x1b
[ 1.670743] microcode: Microcode Update Driver: v2.01 <tigran@aivazian.fsnet.co.uk>, Peter Oruba
[ 1.670931] registered taskstats version 1
[ 1.670955] zswap: loaded using pool lzo/zbud
[ 1.688143] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input0
[ 2.046712] tsc: Refined TSC clocksource calibration: 2494.333 MHz
[ 2.046720] clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x23f45085418, max_idle_ns: 440795285711 ns
[ 2.683054] rtc_cmos 00:03: setting system clock to 2017-07-27 04:07:03 UTC (1501128423)
[ 2.683099] PM: Hibernation image not present or could not be loaded.
[ 2.684733] Freeing unused kernel memory: 1392K (ffffffffa911e000 - ffffffffa927a000)
[ 2.684734] Write protecting the kernel read-only data: 12288k
[ 2.685422] Freeing unused kernel memory: 1988K (ffff88fb4de0f000 - ffff88fb4e000000)
[ 2.689047] Freeing unused kernel memory: 1240K (ffff88fb4e2ca000 - ffff88fb4e400000)
[ 2.698020] x86/mm: Checked W+X mappings: passed, no W+X pages found.
[ 2.716727] random: systemd-udevd: uninitialized urandom read (16 bytes read)
[ 2.716815] random: systemd-udevd: uninitialized urandom read (16 bytes read)
[ 2.716827] random: systemd-udevd: uninitialized urandom read (16 bytes read)
[ 2.717934] random: udevadm: uninitialized urandom read (16 bytes read)
[ 2.717977] random: udevadm: uninitialized urandom read (16 bytes read)
[ 2.718976] random: udevadm: uninitialized urandom read (16 bytes read)
[ 2.719043] random: udevadm: uninitialized urandom read (16 bytes read)
[ 2.719400] random: udevadm: uninitialized urandom read (16 bytes read)
[ 2.719465] random: udevadm: uninitialized urandom read (16 bytes read)
[ 2.719529] random: udevadm: uninitialized urandom read (16 bytes read)
[ 2.753216] r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded
[ 2.753371] ACPI: bus type USB registered
[ 2.753405] usbcore: registered new interface driver usbfs
[ 2.753421] usbcore: registered new interface driver hub
[ 2.753459] usbcore: registered new device driver usb
[ 2.754051] i801_smbus 0000:00:1f.3: SMBus using PCI interrupt
[ 2.754194] r8169 0000:03:00.0 eth0: RTL8168evl/8111evl at 0xffffb64a43159000, 90:2b:34:64:09:c8, XID 0c900800 IRQ 26
[ 2.754196] r8169 0000:03:00.0 eth0: jumbo features [frames: 9200 bytes, tx checksumming: ko]
[ 2.754489] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 2.755007] ehci-pci: EHCI PCI platform driver
[ 2.755043] SCSI subsystem initialized
[ 2.755204] ehci-pci 0000:00:1a.0: EHCI Host Controller
[ 2.755211] ehci-pci 0000:00:1a.0: new USB bus registered, assigned bus number 1
[ 2.755227] ehci-pci 0000:00:1a.0: debug port 2
[ 2.756523] libata version 3.00 loaded.
[ 2.758599] AVX version of gcm_enc/dec engaged.
[ 2.758600] AES CTR mode by8 optimization enabled
[ 2.759149] ehci-pci 0000:00:1a.0: cache line size of 64 is not supported
[ 2.759175] ehci-pci 0000:00:1a.0: irq 21, io mem 0xf0615000
[ 2.774671] ehci-pci 0000:00:1a.0: USB 2.0 started, EHCI 1.00
[ 2.774855] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
[ 2.774857] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 2.774858] usb usb1: Product: EHCI Host Controller
[ 2.774860] usb usb1: Manufacturer: Linux 4.9.0-3-amd64 ehci_hcd
[ 2.774861] usb usb1: SerialNumber: 0000:00:1a.0
[ 2.775086] hub 1-0:1.0: USB hub found
[ 2.775118] hub 1-0:1.0: 3 ports detected
[ 2.775468] ehci-pci 0000:00:1d.0: EHCI Host Controller
[ 2.775473] ehci-pci 0000:00:1d.0: new USB bus registered, assigned bus number 2
[ 2.775486] ehci-pci 0000:00:1d.0: debug port 2
[ 2.779376] ehci-pci 0000:00:1d.0: cache line size of 64 is not supported
[ 2.779392] ehci-pci 0000:00:1d.0: irq 19, io mem 0xf0616000
[ 2.782112] r8169 0000:03:00.0 enp3s0: renamed from eth0
[ 2.794713] ehci-pci 0000:00:1d.0: USB 2.0 started, EHCI 1.00
[ 2.794779] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002
[ 2.794780] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 2.794781] usb usb2: Product: EHCI Host Controller
[ 2.794782] usb usb2: Manufacturer: Linux 4.9.0-3-amd64 ehci_hcd
[ 2.794783] usb usb2: SerialNumber: 0000:00:1d.0
[ 2.795011] hub 2-0:1.0: USB hub found
[ 2.795017] hub 2-0:1.0: 3 ports detected
[ 2.795307] xhci_hcd 0000:00:14.0: xHCI Host Controller
[ 2.795313] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 3
[ 2.796400] xhci_hcd 0000:00:14.0: hcc params 0x200071a1 hci version 0x100 quirks 0x0000b930
[ 2.796405] xhci_hcd 0000:00:14.0: cache line size of 64 is not supported
[ 2.796813] usb usb3: New USB device found, idVendor=1d6b, idProduct=0002
[ 2.796814] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 2.796815] usb usb3: Product: xHCI Host Controller
[ 2.796816] usb usb3: Manufacturer: Linux 4.9.0-3-amd64 xhci-hcd
[ 2.796830] usb usb3: SerialNumber: 0000:00:14.0
[ 2.797080] hub 3-0:1.0: USB hub found
[ 2.797136] hub 3-0:1.0: 4 ports detected
[ 2.797453] xhci_hcd 0000:00:14.0: xHCI Host Controller
[ 2.797456] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 4
[ 2.797697] usb usb4: New USB device found, idVendor=1d6b, idProduct=0003
[ 2.797698] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 2.797699] usb usb4: Product: xHCI Host Controller
[ 2.797700] usb usb4: Manufacturer: Linux 4.9.0-3-amd64 xhci-hcd
[ 2.797700] usb usb4: SerialNumber: 0000:00:14.0
[ 2.797839] hub 4-0:1.0: USB hub found
[ 2.797867] hub 4-0:1.0: 4 ports detected
[ 2.798060] ahci 0000:00:1f.2: version 3.0
[ 2.798227] ahci 0000:00:1f.2: SSS flag set, parallel bus scan disabled
[ 2.808353] ahci 0000:00:1f.2: AHCI 0001.0300 32 slots 6 ports 6 Gbps 0x3f impl SATA mode
[ 2.808355] ahci 0000:00:1f.2: flags: 64bit ncq sntf ilck stag pm led clo pio slum part apst
[ 2.809061] scsi host0: ahci
[ 2.809282] scsi host1: ahci
[ 2.809512] scsi host2: ahci
[ 2.809672] scsi host3: ahci
[ 2.809759] scsi host4: ahci
[ 2.809831] scsi host5: ahci
[ 2.809872] ata1: SATA max UDMA/133 abar m2048@0xf0614000 port 0xf0614100 irq 28
[ 2.809874] ata2: SATA max UDMA/133 abar m2048@0xf0614000 port 0xf0614180 irq 28
[ 2.809876] ata3: SATA max UDMA/133 abar m2048@0xf0614000 port 0xf0614200 irq 28
[ 2.809877] ata4: SATA max UDMA/133 abar m2048@0xf0614000 port 0xf0614280 irq 28
[ 2.809879] ata5: SATA max UDMA/133 abar m2048@0xf0614000 port 0xf0614300 irq 28
[ 2.809880] ata6: SATA max UDMA/133 abar m2048@0xf0614000 port 0xf0614380 irq 28
[ 3.070923] clocksource: Switched to clocksource tsc
[ 3.102672] usb 1-1: new high-speed USB device number 2 using ehci-pci
[ 3.122672] usb 2-1: new high-speed USB device number 2 using ehci-pci
[ 3.125248] ata1: SATA link down (SStatus 0 SControl 300)
[ 3.251139] usb 1-1: New USB device found, idVendor=8087, idProduct=0024
[ 3.251141] usb 1-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[ 3.251553] hub 1-1:1.0: USB hub found
[ 3.251742] hub 1-1:1.0: 6 ports detected
[ 3.271150] usb 2-1: New USB device found, idVendor=8087, idProduct=0024
[ 3.271153] usb 2-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[ 3.271508] hub 2-1:1.0: USB hub found
[ 3.271632] hub 2-1:1.0: 6 ports detected
[ 3.441111] ata2: SATA link down (SStatus 0 SControl 300)
[ 3.558663] usb 2-1.3: new high-speed USB device number 3 using ehci-pci
[ 3.667941] usb 2-1.3: New USB device found, idVendor=154b, idProduct=008a
[ 3.667944] usb 2-1.3: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[ 3.667945] usb 2-1.3: Product: USB 3.0 FD
[ 3.667947] usb 2-1.3: Manufacturer: PNY Technologies
[ 3.667948] usb 2-1.3: SerialNumber: 3391396552
[ 3.670168] usb-storage 2-1.3:1.0: USB Mass Storage device detected
[ 3.670290] scsi host6: usb-storage 2-1.3:1.0
[ 3.670375] usbcore: registered new interface driver usb-storage
[ 3.670770] usbcore: registered new interface driver uas
[ 3.757072] ata3: SATA link down (SStatus 0 SControl 300)
[ 4.068842] ata4: SATA link down (SStatus 0 SControl 300)
[ 4.380820] ata5: SATA link down (SStatus 0 SControl 300)
[ 4.671499] scsi 6:0:0:0: Direct-Access PNY USB 3.0 FD 1.00 PQ: 0 ANSI: 6
[ 4.673434] sd 6:0:0:0: [sda] 61069066 512-byte logical blocks: (31.3 GB/29.1 GiB)
[ 4.673801] sd 6:0:0:0: [sda] Write Protect is off
[ 4.673805] sd 6:0:0:0: [sda] Mode Sense: 23 00 00 00
[ 4.674164] sd 6:0:0:0: [sda] Write cache: disabled, read cache: disabled, doesn't support DPO or FUA
[ 4.692897] ata6: SATA link down (SStatus 0 SControl 300)
[ 4.693989] sda: sda1 sda2 sda3 sda5 sda6 sda7 sda8 sda9
[ 4.696027] random: fast init done
[ 4.696081] sd 6:0:0:0: [sda] Attached SCSI removable disk
[ 5.287652] EXT4-fs (sda5): mounted filesystem with ordered data mode. Opts: (null)
[ 5.746033] ip_tables: (C) 2000-2006 Netfilter Core Team
[ 5.765203] systemd[1]: systemd 232 running in system mode. (+PAM +AUDIT +SELINUX +IMA +APPARMOR +SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ +LZ4 +SECCOMP +BLKID +ELFUTILS +KMOD +IDN)
[ 5.765416] systemd[1]: Detected architecture x86-64.
[ 5.766533] systemd[1]: Set hostname to <universi-lbx200>.
[ 6.184943] systemd[1]: rdnssd.service: Cannot add dependency job, ignoring: Unit rdnssd.service is masked.
[ 6.185743] systemd[1]: Listening on udev Kernel Socket.
[ 6.185865] systemd[1]: Listening on Journal Socket (/dev/log).
[ 6.185965] systemd[1]: Listening on Journal Audit Socket.
[ 6.186007] systemd[1]: Listening on fsck to fsckd communication Socket.
[ 6.186070] systemd[1]: Started Forward Password Requests to Wall Directory Watch.
[ 6.186117] systemd[1]: Listening on udev Control Socket.
[ 6.342175] lp: driver loaded but no devices found
[ 6.349216] ppdev: user-space parallel port driver
[ 6.489895] EXT4-fs (sda5): re-mounted. Opts: user_xattr,errors=remount-ro
[ 6.781810] input: PC Speaker as /devices/platform/pcspkr/input/input3
[ 6.973507] ACPI: Video Device [GFX0] (multi-head: yes rom: no post: no)
[ 6.973828] acpi device:03: registered as cooling_device8
[ 6.973872] input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:00/input/input4
[ 6.995875] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input5
[ 6.995877] ACPI: Power Button [PWRF]
[ 7.087161] RAPL PMU: API unit is 2^-32 Joules, 3 fixed counters, 163840 ms ovfl timer
[ 7.087162] RAPL PMU: hw unit of domain pp0-core 2^-16 Joules
[ 7.087166] RAPL PMU: hw unit of domain package 2^-16 Joules
[ 7.087167] RAPL PMU: hw unit of domain pp1-gpu 2^-16 Joules
[ 7.158988] EDAC MC: Ver: 3.0.0
[ 7.176122] [drm] Initialized
[ 7.605291] sd 6:0:0:0: Attached scsi generic sg0 type 0
[ 8.392489] EXT4-fs (sda3): mounting ext2 file system using the ext4 subsystem
[ 8.398816] EXT4-fs (sda3): mounted filesystem without journal. Opts: user_xattr
[ 8.508800] EXT4-fs (sda8): mounted filesystem with ordered data mode. Opts: user_xattr
[ 8.541704] systemd-journald[259]: Received request to flush runtime journal from PID 1
[ 8.613305] EXT4-fs (sda9): mounted filesystem with ordered data mode. Opts: user_xattr
[ 8.681834] EXT4-fs (sda6): mounted filesystem with ordered data mode. Opts: user_xattr
[ 8.848375] EXT4-fs (sda7): mounted filesystem with ordered data mode. Opts: user_xattr
[ 9.118529] mei_me 0000:00:16.0: wait hw ready failed
[ 9.118590] mei_me 0000:00:16.0: hw_start failed ret = -62
[ 9.118638] mei_me 0000:00:16.0: H_RST is set = 0x80000015
[ 9.473533] random: crng init done
[ 10.989672] IPv6: ADDRCONF(NETDEV_UP): enp3s0: link is not ready
[ 10.990793] r8169 0000:03:00.0: firmware: failed to load rtl_nic/rtl8168e-3.fw (-2)
[ 10.990835] r8169 0000:03:00.0: Direct firmware load for rtl_nic/rtl8168e-3.fw failed with error -2
[ 10.990838] r8169 0000:03:00.0 enp3s0: unable to load firmware patch rtl_nic/rtl8168e-3.fw (-2)
[ 11.008635] r8169 0000:03:00.0 enp3s0: link down
[ 11.008683] IPv6: ADDRCONF(NETDEV_UP): enp3s0: link is not ready
[ 11.134479] mei_me 0000:00:16.0: wait hw ready failed
[ 11.134514] mei_me 0000:00:16.0: hw_start failed ret = -62
[ 11.134554] mei_me 0000:00:16.0: H_RST is set = 0x80000015
[ 13.150449] mei_me 0000:00:16.0: wait hw ready failed
[ 13.150457] mei_me 0000:00:16.0: hw_start failed ret = -62
[ 13.150460] mei_me 0000:00:16.0: reset: reached maximal consecutive resets: disabling the device
[ 13.150462] mei_me 0000:00:16.0: reset failed ret = -19
[ 13.150464] mei_me 0000:00:16.0: link layer initialization failed.
[ 13.150466] mei_me 0000:00:16.0: init hw failure.
[ 13.150676] mei_me 0000:00:16.0: initialization failed.
[ 13.151164] ACPI Warning: SystemIO range 0x0000000000000528-0x000000000000052F conflicts with OpRegion 0x0000000000000500-0x000000000000057F (\PMIO) (20160831/utaddress-247)
[ 13.151172] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[ 13.151175] ACPI Warning: SystemIO range 0x00000000000004C0-0x00000000000004CF conflicts with OpRegion 0x0000000000000480-0x00000000000004EB (\GPIO) (20160831/utaddress-247)
[ 13.151184] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[ 13.151185] ACPI Warning: SystemIO range 0x00000000000004B0-0x00000000000004BF conflicts with OpRegion 0x0000000000000480-0x00000000000004EB (\GPIO) (20160831/utaddress-247)
[ 13.151190] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[ 13.151191] ACPI Warning: SystemIO range 0x0000000000000480-0x00000000000004AF conflicts with OpRegion 0x0000000000000480-0x00000000000004EB (\GPIO) (20160831/utaddress-247)
[ 13.151199] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[ 13.151200] lpc_ich: Resource conflict(s) found affecting gpio_ich
[ 13.151881] [drm] Memory usable by graphics device = 2048M
[ 13.151884] checking generic (e0000000 420000) vs hw (e0000000 10000000)
[ 13.151886] fb: switching to inteldrmfb from EFI VGA
[ 13.152078] Console: switching to colour dummy device 80x25
[ 13.152493] [drm] Replacing VGA console driver
[ 13.152576] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
[ 13.152577] [drm] Driver supports precise vblank timestamp query.
[ 13.152581] i915 0000:00:02.0: Invalid PCI ROM header signature: expecting 0xaa55, got 0xf31f
[ 13.152584] [drm] failed to find VBIOS tables
[ 13.152883] vgaarb: device changed decodes: PCI:0000:00:02.0,olddecodes=io+mem,decodes=io+mem:owns=io+mem
[ 13.159267] iTCO_vendor_support: vendor-support=0
[ 13.160199] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.11
[ 13.160223] iTCO_wdt: unable to reset NO_REBOOT flag, device disabled by hardware/BIOS
[ 13.186385] snd_hda_codec_realtek hdaudioC0D2: autoconfig for ALC887-VD: line_outs=4 (0x14/0x16/0x15/0x17/0x0) type:line
[ 13.186387] snd_hda_codec_realtek hdaudioC0D2: speaker_outs=0 (0x0/0x0/0x0/0x0/0x0)
[ 13.186389] snd_hda_codec_realtek hdaudioC0D2: hp_outs=1 (0x1b/0x0/0x0/0x0/0x0)
[ 13.186389] snd_hda_codec_realtek hdaudioC0D2: mono: mono_out=0x0
[ 13.186390] snd_hda_codec_realtek hdaudioC0D2: dig-out=0x1e/0x0
[ 13.186391] snd_hda_codec_realtek hdaudioC0D2: inputs:
[ 13.186393] snd_hda_codec_realtek hdaudioC0D2: Rear Mic=0x18
[ 13.186394] snd_hda_codec_realtek hdaudioC0D2: Front Mic=0x19
[ 13.186395] snd_hda_codec_realtek hdaudioC0D2: Line=0x1a
[ 13.186396] snd_hda_codec_realtek hdaudioC0D2: CD=0x1c
[ 13.274887] [drm] Initialized i915 1.6.0 20160919 for 0000:00:02.0 on minor 0
[ 13.274929] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[ 13.381496] snd_hda_intel 0000:00:1b.0: bound 0000:00:02.0 (ops i915_audio_component_bind_ops [i915])
[ 13.381516] fbcon: inteldrmfb (fb0) is primary device
[ 13.381588] Console: switching to colour frame buffer device 170x48
[ 13.381592] i915 0000:00:02.0: fb0: inteldrmfb frame buffer device
[ 13.383979] input: HDA Digital PCBeep as /devices/pci0000:00/0000:00:1b.0/sound/card0/input6
[ 13.384987] input: HDA Intel PCH Rear Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input7
[ 13.385060] input: HDA Intel PCH Front Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input8
[ 13.385141] input: HDA Intel PCH Line as /devices/pci0000:00/0000:00:1b.0/sound/card0/input9
[ 13.385218] input: HDA Intel PCH Line Out Front as /devices/pci0000:00/0000:00:1b.0/sound/card0/input10
[ 13.385290] input: HDA Intel PCH Line Out Surround as /devices/pci0000:00/0000:00:1b.0/sound/card0/input11
[ 13.385365] input: HDA Intel PCH Line Out CLFE as /devices/pci0000:00/0000:00:1b.0/sound/card0/input12
[ 13.385439] input: HDA Intel PCH Line Out Side as /devices/pci0000:00/0000:00:1b.0/sound/card0/input13
[ 13.385511] input: HDA Intel PCH HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:1b.0/sound/card0/input14
[ 13.385580] input: HDA Intel PCH HDMI/DP,pcm=7 as /devices/pci0000:00/0000:00:1b.0/sound/card0/input15
[ 13.385652] input: HDA Intel PCH HDMI/DP,pcm=8 as /devices/pci0000:00/0000:00:1b.0/sound/card0/input16
[ 14.027551] ath: EEPROM regdomain: 0x6a
[ 14.027552] ath: EEPROM indicates we should expect a direct regpair map
[ 14.027553] ath: Country alpha2 being used: 00
[ 14.027554] ath: Regpair used: 0x6a
[ 14.123672] ieee80211 phy0: Selected rate control algorithm 'minstrel_ht'
[ 14.123885] ieee80211 phy0: Atheros AR9280 Rev:2 mem=0xffffb64a43bd0000, irq=16
[ 14.140493] intel_rapl: Found RAPL domain package
[ 14.140495] intel_rapl: Found RAPL domain core
[ 14.140497] intel_rapl: Found RAPL domain uncore
[ 14.205021] ath9k 0000:02:00.0 wlp2s0: renamed from wlan0
[ 14.229329] IPv6: ADDRCONF(NETDEV_UP): wlp2s0: link is not ready
[ 14.244340] IPv6: ADDRCONF(NETDEV_UP): wlp2s0: link is not ready
[ 14.267394] IPv6: ADDRCONF(NETDEV_UP): wlp2s0: link is not ready
[ 14.513520] IPv6: ADDRCONF(NETDEV_UP): wlp2s0: link is not ready
[ 18.348383] IPv6: ADDRCONF(NETDEV_UP): wlp2s0: link is not ready
[ 18.378467] wlp2s0: authenticate with f8:1a:67:5a:c4:74
[ 18.392817] wlp2s0: send auth to f8:1a:67:5a:c4:74 (try 1/3)
[ 18.395175] wlp2s0: authenticated
[ 18.398333] wlp2s0: associate with f8:1a:67:5a:c4:74 (try 1/3)
[ 18.401750] wlp2s0: RX AssocResp from f8:1a:67:5a:c4:74 (capab=0x431 status=0 aid=4)
[ 18.401907] wlp2s0: associated
[ 18.401935] IPv6: ADDRCONF(NETDEV_CHANGE): wlp2s0: link becomes ready
[ 18.405393] ath: EEPROM regdomain: 0x809c
[ 18.405394] ath: EEPROM indicates we should expect a country code
[ 18.405395] ath: doing EEPROM country->regdmn map search
[ 18.405395] ath: country maps to regdmn code: 0x52
[ 18.405396] ath: Country alpha2 being used: CN
[ 18.405396] ath: Regpair used: 0x52
[ 18.405397] ath: regdomain 0x809c dynamically updated by country IE
[ 300.147571] mce: [Hardware Error]: Machine check events logged
[ 5437.703342] wlp2s0: deauthenticating from f8:1a:67:5a:c4:74 by local choice (Reason: 3=DEAUTH_LEAVING)
[ 5437.735359] IPv6: ADDRCONF(NETDEV_UP): wlp2s0: link is not ready
[ 5437.791290] PM: Syncing filesystems ... done.
[ 5437.869267] PM: Preparing system for sleep (mem)
[ 5437.869404] Freezing user space processes ... (elapsed 0.001 seconds) done.
[ 5437.870632] Freezing remaining freezable tasks ... (elapsed 0.001 seconds) done.
[ 5437.871697] PM: Suspending system (mem)
[ 5437.871712] Suspending console(s) (use no_console_suspend to debug)
[ 5437.988830] PM: suspend of devices complete after 117.013 msecs
[ 5438.008968] PM: late suspend of devices complete after 20.134 msecs
[ 5438.009436] ehci-pci 0000:00:1d.0: System wakeup enabled by ACPI
[ 5438.009526] ehci-pci 0000:00:1a.0: System wakeup enabled by ACPI
[ 5438.009579] xhci_hcd 0000:00:14.0: System wakeup enabled by ACPI
[ 5438.048878] PM: noirq suspend of devices complete after 39.909 msecs
[ 5438.049207] ACPI: Preparing to enter system sleep state S3
[ 5438.049257] PM: Saving platform NVS memory
[ 5438.049257] Disabling non-boot CPUs ...
[ 5438.049487] Broke affinity for irq 21
[ 5438.049490] Broke affinity for irq 28
[ 5438.050503] smpboot: CPU 1 is now offline
[ 5438.051018] Broke affinity for irq 21
[ 5438.051021] Broke affinity for irq 28
[ 5438.052031] smpboot: CPU 2 is now offline
[ 5438.052524] Broke affinity for irq 19
[ 5438.052526] Broke affinity for irq 21
[ 5438.052529] Broke affinity for irq 26
[ 5438.052531] Broke affinity for irq 28
[ 5438.053546] smpboot: CPU 3 is now offline
[ 5438.054011] Broke affinity for irq 19
[ 5438.054014] Broke affinity for irq 21
[ 5438.054016] Broke affinity for irq 26
[ 5438.054018] Broke affinity for irq 28
[ 5438.055027] smpboot: CPU 4 is now offline
[ 5438.055688] Broke affinity for irq 19
[ 5438.055689] Broke affinity for irq 21
[ 5438.055691] Broke affinity for irq 26
[ 5438.055693] Broke affinity for irq 28
[ 5438.055696] Broke affinity for irq 30
[ 5438.056704] smpboot: CPU 5 is now offline
[ 5438.057030] Broke affinity for irq 19
[ 5438.057033] Broke affinity for irq 21
[ 5438.057037] Broke affinity for irq 26
[ 5438.057040] Broke affinity for irq 28
[ 5438.057043] Broke affinity for irq 30
[ 5438.058051] smpboot: CPU 6 is now offline
[ 5438.058484] Broke affinity for irq 1
[ 5438.058486] Broke affinity for irq 8
[ 5438.058488] Broke affinity for irq 9
[ 5438.058490] Broke affinity for irq 12
[ 5438.058492] Broke affinity for irq 16
[ 5438.058494] Broke affinity for irq 19
[ 5438.058495] Broke affinity for irq 21
[ 5438.058497] Broke affinity for irq 23
[ 5438.058499] Broke affinity for irq 26
[ 5438.058501] Broke affinity for irq 27
[ 5438.058503] Broke affinity for irq 28
[ 5438.058505] Broke affinity for irq 30
[ 5438.059511] smpboot: CPU 7 is now offline
[ 5438.060960] ACPI: Low-level resume complete
[ 5438.061002] PM: Restoring platform NVS memory
[ 5438.061282] Suspended for 104.069 seconds
[ 5438.061347] mce: [Hardware Error]: Machine check events logged
[ 5438.061378] Enabling non-boot CPUs ...
[ 5438.061466] x86: Booting SMP configuration:
[ 5438.061467] smpboot: Booting Node 0 Processor 1 APIC 0x1
[ 5438.064244] cache: parent cpu1 should not be sleeping
[ 5438.064513] CPU1 is up
[ 5438.064596] smpboot: Booting Node 0 Processor 2 APIC 0x2
[ 5438.067307] cache: parent cpu2 should not be sleeping
[ 5438.067589] CPU2 is up
[ 5438.067651] smpboot: Booting Node 0 Processor 3 APIC 0x3
[ 5438.070351] cache: parent cpu3 should not be sleeping
[ 5438.070676] CPU3 is up
[ 5438.070737] smpboot: Booting Node 0 Processor 4 APIC 0x4
[ 5438.073495] cache: parent cpu4 should not be sleeping
[ 5438.073819] CPU4 is up
[ 5438.073881] smpboot: Booting Node 0 Processor 5 APIC 0x5
[ 5438.076416] cache: parent cpu5 should not be sleeping
[ 5438.076732] CPU5 is up
[ 5438.076794] smpboot: Booting Node 0 Processor 6 APIC 0x6
[ 5438.079338] cache: parent cpu6 should not be sleeping
[ 5438.079680] CPU6 is up
[ 5438.079744] smpboot: Booting Node 0 Processor 7 APIC 0x7
[ 5438.082284] cache: parent cpu7 should not be sleeping
[ 5438.082636] CPU7 is up
[ 5438.090761] ACPI: Waking up from system sleep state S3
[ 5438.110585] ehci-pci 0000:00:1d.0: System wakeup disabled by ACPI
[ 5438.110593] ehci-pci 0000:00:1a.0: System wakeup disabled by ACPI
[ 5438.110644] xhci_hcd 0000:00:14.0: System wakeup disabled by ACPI
[ 5438.150653] PM: noirq resume of devices complete after 59.836 msecs
[ 5438.151002] PM: early resume of devices complete after 0.317 msecs
[ 5438.151113] pcieport 0000:00:1c.4: System wakeup disabled by ACPI
[ 5438.151143] rtc_cmos 00:03: System wakeup disabled by ACPI
[ 5438.168791] r8169 0000:03:00.0 enp3s0: link down
[ 5438.386391] usb 1-1: reset high-speed USB device number 2 using ehci-pci
[ 5438.465080] ata5: SATA link down (SStatus 0 SControl 300)
[ 5438.465105] ata1: SATA link down (SStatus 0 SControl 300)
[ 5438.465127] ata3: SATA link down (SStatus 0 SControl 300)
[ 5438.465150] ata2: SATA link down (SStatus 0 SControl 300)
[ 5438.465171] ata6: SATA link down (SStatus 0 SControl 300)
[ 5438.465193] ata4: SATA link down (SStatus 0 SControl 300)
[ 5438.643225] PM: resume of devices complete after 492.238 msecs
[ 5438.643509] PM: Finishing wakeup.
[ 5438.643511] Restarting tasks ... done.
[ 5438.648845] video LNXVIDEO:00: Restoring backlight state
[ 5438.691789] IPv6: ADDRCONF(NETDEV_UP): enp3s0: link is not ready
[ 5438.708507] r8169 0000:03:00.0 enp3s0: link down
[ 5438.708553] IPv6: ADDRCONF(NETDEV_UP): enp3s0: link is not ready
[ 5438.709124] IPv6: ADDRCONF(NETDEV_UP): wlp2s0: link is not ready
[ 5438.727721] IPv6: ADDRCONF(NETDEV_UP): wlp2s0: link is not ready
[ 5438.750441] IPv6: ADDRCONF(NETDEV_UP): wlp2s0: link is not ready
[ 5438.786173] IPv6: ADDRCONF(NETDEV_UP): wlp2s0: link is not ready
[ 5442.617476] IPv6: ADDRCONF(NETDEV_UP): wlp2s0: link is not ready
[ 5442.676187] wlp2s0: authenticate with f8:1a:67:5a:c4:74
[ 5442.690663] wlp2s0: send auth to f8:1a:67:5a:c4:74 (try 1/3)
[ 5442.692827] wlp2s0: authenticated
[ 5442.694241] wlp2s0: associate with f8:1a:67:5a:c4:74 (try 1/3)
[ 5442.697731] wlp2s0: RX AssocResp from f8:1a:67:5a:c4:74 (capab=0x431 status=0 aid=4)
[ 5442.697892] wlp2s0: associated
[ 5442.697901] IPv6: ADDRCONF(NETDEV_CHANGE): wlp2s0: link becomes ready
[ 5442.701734] ath: EEPROM regdomain: 0x809c
[ 5442.701735] ath: EEPROM indicates we should expect a country code
[ 5442.701736] ath: doing EEPROM country->regdmn map search
[ 5442.701737] ath: country maps to regdmn code: 0x52
[ 5442.701737] ath: Country alpha2 being used: CN
[ 5442.701738] ath: Regpair used: 0x52
[ 5442.701738] ath: regdomain 0x809c dynamically updated by country IE
[ 5557.673509] systemd[1]: apt-daily.timer: Adding 4h 17min 54.393127s random time.
[ 5561.228869] systemd[1]: apt-daily.timer: Adding 6h 27min 15.609889s random time.
[ 5610.464508] systemd[1]: apt-daily.timer: Adding 11h 6min 1.900584s random time.
[ 5743.719023] systemd[1]: apt-daily.timer: Adding 4h 25min 54.738365s random time.
[ 5881.141616] systemd[1]: apt-daily.timer: Adding 4h 23min 23.813094s random time.
[ 5881.488442] systemd[1]: apt-daily.timer: Adding 11h 31min 18.485580s random time.
[ 5883.571877] systemd[1]: apt-daily.timer: Adding 8h 22min 20.069586s random time.
[ 5890.412088] systemd[1]: apt-daily.timer: Adding 11h 21min 43.374441s random time.
[ 5890.478575] systemd[1]: apt-daily.timer: Adding 7h 13min 6.439627s random time.
[ 5890.530492] systemd[1]: apt-daily.timer: Adding 1h 39min 38.531130s random time.
[ 5890.552721] systemd: 25 output lines suppressed due to ratelimiting