| [ 0.000000] Initializing cgroup subsys cpuset |
| [ 0.000000] Initializing cgroup subsys cpu |
| [ 0.000000] Initializing cgroup subsys cpuacct |
| [ 0.000000] Linux version 3.16.0-4-amd64 (debian-kernel@lists.debian.org) (gcc version 4.8.4 (Debian 4.8.4-1) ) #1 SMP Debian 3.16.7-ckt9-2 (2015-04-13) |
| [ 0.000000] Command line: root=/dev/nfs initrd=initrd-cb-test-tgt-x86_64 rootfstype=nfs nfsroot=10.100.1.100:/nfsroots/cb-test-tgt-01,v3,hard,nointr,tcp ip=10.100.1.10::10.100.1.1:255.255.255.0:embed-o-matic:eth0:off console=ttyS0,115200n8 consoleblank=0 rw BOOT_IMAGE=vmlinuz-cb-test-tgt-x86_64 |
| [ 0.000000] e820: BIOS-provided physical RAM map: |
| [ 0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009fbff] usable |
| [ 0.000000] BIOS-e820: [mem 0x000000000009fc00-0x000000000009ffff] reserved |
| [ 0.000000] BIOS-e820: [mem 0x00000000000f0000-0x00000000000fffff] reserved |
| [ 0.000000] BIOS-e820: [mem 0x0000000000100000-0x00000000bff99fff] usable |
| [ 0.000000] BIOS-e820: [mem 0x00000000bff9a000-0x00000000cfffffff] reserved |
| [ 0.000000] BIOS-e820: [mem 0x0000000100000000-0x000000017fffffff] usable |
| [ 0.000000] NX (Execute Disable) protection: active |
| [ 0.000000] SMBIOS 2.7 present. |
| [ 0.000000] DMI: ASUS KFSN4-DRE/KFSN4-DRE, BIOS RAPTOR-NORMAL 12/26/2016 |
| [ 0.000000] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved |
| [ 0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable |
| [ 0.000000] AGP: No AGP bridge found |
| [ 0.000000] e820: last_pfn = 0x180000 max_arch_pfn = 0x400000000 |
| [ 0.000000] MTRR default type: uncachable |
| [ 0.000000] MTRR fixed ranges enabled: |
| [ 0.000000] 00000-9FFFF write-back |
| [ 0.000000] A0000-BFFFF uncachable |
| [ 0.000000] C0000-FFFFF write-back |
| [ 0.000000] MTRR variable ranges enabled: |
| [ 0.000000] 0 base 000000000000 mask FFFF80000000 write-back |
| [ 0.000000] 1 base 000080000000 mask FFFFC0000000 write-back |
| [ 0.000000] 2 base 0000F8000000 mask FFFFFC000000 write-combining |
| [ 0.000000] 3 disabled |
| [ 0.000000] 4 disabled |
| [ 0.000000] 5 disabled |
| [ 0.000000] 6 disabled |
| [ 0.000000] 7 disabled |
| [ 0.000000] TOM2: 0000000180000000 aka 6144M |
| [ 0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106 |
| [ 0.000000] e820: last_pfn = 0xbff9a max_arch_pfn = 0x400000000 |
| [ 0.000000] found SMP MP-table at [mem 0x000f0640-0x000f064f] mapped at [ffff8800000f0640] |
| [ 0.000000] Base memory trampoline at [ffff880000099000] 99000 size 24576 |
| [ 0.000000] Using GB pages for direct mapping |
| [ 0.000000] init_memory_mapping: [mem 0x00000000-0x000fffff] |
| [ 0.000000] [mem 0x00000000-0x000fffff] page 4k |
| [ 0.000000] BRK [0x01af4000, 0x01af4fff] PGTABLE |
| [ 0.000000] BRK [0x01af5000, 0x01af5fff] PGTABLE |
| [ 0.000000] BRK [0x01af6000, 0x01af6fff] PGTABLE |
| [ 0.000000] init_memory_mapping: [mem 0x17fe00000-0x17fffffff] |
| [ 0.000000] [mem 0x17fe00000-0x17fffffff] page 1G |
| [ 0.000000] init_memory_mapping: [mem 0x17c000000-0x17fdfffff] |
| [ 0.000000] [mem 0x17c000000-0x17fdfffff] page 1G |
| [ 0.000000] init_memory_mapping: [mem 0x100000000-0x17bffffff] |
| [ 0.000000] [mem 0x100000000-0x17bffffff] page 1G |
| [ 0.000000] init_memory_mapping: [mem 0x00100000-0xbff99fff] |
| [ 0.000000] [mem 0x00100000-0x001fffff] page 4k |
| [ 0.000000] [mem 0x00200000-0x3fffffff] page 2M |
| [ 0.000000] [mem 0x40000000-0x7fffffff] page 1G |
| [ 0.000000] [mem 0x80000000-0xbfdfffff] page 2M |
| [ 0.000000] [mem 0xbfe00000-0xbff99fff] page 4k |
| [ 0.000000] RAMDISK: [mem 0x7f24c000-0x7fffefff] |
| [ 0.000000] ACPI: Early table checksum verification disabled |
| [ 0.000000] ACPI: RSDP 0x00000000000F0810 000024 (v02 CORE ) |
| [ 0.000000] ACPI: XSDT 0x00000000BFFAB0E0 00006C (v01 CORE COREBOOT 00000000 CORE 00000000) |
| [ 0.000000] ACPI: FACP 0x00000000BFFAD8D0 000074 (v01 CORE COREBOOT 00000000 CORE 00000000) |
| [ 0.000000] ACPI: DSDT 0x00000000BFFAB280 002644 (v02 ASUS COREBOOT 00000001 INTL 20150619) |
| [ 0.000000] ACPI: FACS 0x00000000BFFAB240 000040 |
| [ 0.000000] ACPI: SSDT 0x00000000BFFAD9D0 000EEA (v02 CORE COREBOOT 0000002A CORE 0000002A) |
| [ 0.000000] ACPI: TCPA 0x00000000BFFAE8C0 000032 (v02 CORE COREBOOT 00000000 CORE 00000000) |
| [ 0.000000] ACPI: APIC 0x00000000BFFAE900 0000C6 (v01 CORE COREBOOT 00000000 CORE 00000000) |
| [ 0.000000] ACPI: SRAT 0x00000000BFFAE9D0 000150 (v01 CORE COREBOOT 00000000 CORE 00000000) |
| [ 0.000000] ACPI: SLIT 0x00000000BFFAEB20 000030 (v01 CORE COREBOOT 00000000 CORE 00000000) |
| [ 0.000000] ACPI: HPET 0x00000000BFFAEB50 000038 (v01 CORE COREBOOT 00000000 CORE 00000000) |
| [ 0.000000] ACPI: SRAT 0x00000000BFFAEB90 000150 (v01 CORE COREBOOT 00000000 CORE 00000000) |
| [ 0.000000] ACPI: SLIT 0x00000000BFFAECE0 000030 (v01 CORE COREBOOT 00000000 CORE 00000000) |
| [ 0.000000] ACPI: Local APIC address 0xfee00000 |
| [ 0.000000] SRAT: PXM 0 -> APIC 0x00 -> Node 0 |
| [ 0.000000] SRAT: PXM 0 -> APIC 0x01 -> Node 0 |
| [ 0.000000] SRAT: PXM 0 -> APIC 0x02 -> Node 0 |
| [ 0.000000] SRAT: PXM 0 -> APIC 0x03 -> Node 0 |
| [ 0.000000] SRAT: PXM 1 -> APIC 0x04 -> Node 1 |
| [ 0.000000] SRAT: PXM 1 -> APIC 0x05 -> Node 1 |
| [ 0.000000] SRAT: PXM 1 -> APIC 0x06 -> Node 1 |
| [ 0.000000] SRAT: PXM 1 -> APIC 0x07 -> Node 1 |
| [ 0.000000] SRAT: Node 0 PXM 0 [mem 0x00000000-0x0009ffff] |
| [ 0.000000] SRAT: Node 0 PXM 0 [mem 0x00100000-0xbfffffff] |
| [ 0.000000] SRAT: Node 0 PXM 0 [mem 0x100000000-0x13fffffff] |
| [ 0.000000] SRAT: Node 1 PXM 1 [mem 0x140000000-0x17fffffff] |
| [ 0.000000] NUMA: Initialized distance table, cnt=2 |
| [ 0.000000] NUMA: Node 0 [mem 0x00000000-0x0009ffff] + [mem 0x00100000-0xbfffffff] -> [mem 0x00000000-0xbfffffff] |
| [ 0.000000] NUMA: Node 0 [mem 0x00000000-0xbfffffff] + [mem 0x100000000-0x13fffffff] -> [mem 0x00000000-0x13fffffff] |
| [ 0.000000] Initmem setup node 0 [mem 0x00000000-0x13fffffff] |
| [ 0.000000] NODE_DATA [mem 0x13fffb000-0x13fffffff] |
| [ 0.000000] Initmem setup node 1 [mem 0x140000000-0x17fffffff] |
| [ 0.000000] NODE_DATA [mem 0x17fff8000-0x17fffcfff] |
| [ 0.000000] [ffffea0000000000-ffffea00045fffff] PMD -> [ffff88013be00000-ffff88013f5fffff] on node 0 |
| [ 0.000000] [ffffea0004600000-ffffea00053fffff] PMD -> [ffff88017e600000-ffff88017f3fffff] on node 1 |
| [ 0.000000] Zone ranges: |
| [ 0.000000] DMA [mem 0x00001000-0x00ffffff] |
| [ 0.000000] DMA32 [mem 0x01000000-0xffffffff] |
| [ 0.000000] Normal [mem 0x100000000-0x17fffffff] |
| [ 0.000000] Movable zone start for each node |
| [ 0.000000] Early memory node ranges |
| [ 0.000000] node 0: [mem 0x00001000-0x0009efff] |
| [ 0.000000] node 0: [mem 0x00100000-0xbff99fff] |
| [ 0.000000] node 0: [mem 0x100000000-0x13fffffff] |
| [ 0.000000] node 1: [mem 0x140000000-0x17fffffff] |
| [ 0.000000] On node 0 totalpages: 1048376 |
| [ 0.000000] DMA zone: 56 pages used for memmap |
| [ 0.000000] DMA zone: 21 pages reserved |
| [ 0.000000] DMA zone: 3998 pages, LIFO batch:0 |
| [ 0.000000] DMA32 zone: 10695 pages used for memmap |
| [ 0.000000] DMA32 zone: 782234 pages, LIFO batch:31 |
| [ 0.000000] Normal zone: 3584 pages used for memmap |
| [ 0.000000] Normal zone: 262144 pages, LIFO batch:31 |
| [ 0.000000] On node 1 totalpages: 262144 |
| [ 0.000000] Normal zone: 3584 pages used for memmap |
| [ 0.000000] Normal zone: 262144 pages, LIFO batch:31 |
| [ 0.000000] ACPI: PM-Timer IO Port: 0x2008 |
| [ 0.000000] ACPI: Local APIC address 0xfee00000 |
| [ 0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled) |
| [ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled) |
| [ 0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x02] enabled) |
| [ 0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x03] enabled) |
| [ 0.000000] ACPI: LAPIC (acpi_id[0x04] lapic_id[0x04] enabled) |
| [ 0.000000] ACPI: LAPIC (acpi_id[0x05] lapic_id[0x05] enabled) |
| [ 0.000000] ACPI: LAPIC (acpi_id[0x06] lapic_id[0x06] enabled) |
| [ 0.000000] ACPI: LAPIC (acpi_id[0x07] lapic_id[0x07] enabled) |
| [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1]) |
| [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1]) |
| [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x02] high edge lint[0x1]) |
| [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x03] high edge lint[0x1]) |
| [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x04] high edge lint[0x1]) |
| [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x05] high edge lint[0x1]) |
| [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x06] high edge lint[0x1]) |
| [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x07] high edge lint[0x1]) |
| [ 0.000000] ACPI: IOAPIC (id[0x18] address[0xfec00000] gsi_base[0]) |
| [ 0.000000] IOAPIC[0]: apic_id 24, version 17, address 0xfec00000, GSI 0-23 |
| [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level) |
| [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 14 global_irq 14 high edge) |
| [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 15 global_irq 15 high edge) |
| [ 0.000000] ACPI: IRQ9 used by override. |
| [ 0.000000] ACPI: IRQ14 used by override. |
| [ 0.000000] ACPI: IRQ15 used by override. |
| [ 0.000000] Using ACPI (MADT) for SMP configuration information |
| [ 0.000000] ACPI: HPET id: 0x10de8201 base: 0xfed00000 |
| [ 0.000000] smpboot: Allowing 8 CPUs, 0 hotplug CPUs |
| [ 0.000000] nr_irqs_gsi: 40 |
| [ 0.000000] PM: Registered nosave memory: [mem 0x0009f000-0x0009ffff] |
| [ 0.000000] PM: Registered nosave memory: [mem 0x000a0000-0x000effff] |
| [ 0.000000] PM: Registered nosave memory: [mem 0x000f0000-0x000fffff] |
| [ 0.000000] PM: Registered nosave memory: [mem 0xbff9a000-0xcfffffff] |
| [ 0.000000] PM: Registered nosave memory: [mem 0xd0000000-0xffffffff] |
| [ 0.000000] e820: [mem 0xd0000000-0xffffffff] available for PCI devices |
| [ 0.000000] Booting paravirtualized kernel on bare hardware |
| [ 0.000000] setup_percpu: NR_CPUS:512 nr_cpumask_bits:512 nr_cpu_ids:8 nr_node_ids:2 |
| [ 0.000000] PERCPU: Embedded 27 pages/cpu @ffff88013fc00000 s80896 r8192 d21504 u524288 |
| [ 0.000000] pcpu-alloc: s80896 r8192 d21504 u524288 alloc=1*2097152 |
| [ 0.000000] pcpu-alloc: [0] 0 1 2 3 [1] 4 5 6 7 |
| [ 0.000000] Built 2 zonelists in Node order, mobility grouping on. Total pages: 1292580 |
| [ 0.000000] Policy zone: Normal |
| [ 0.000000] Kernel command line: root=/dev/nfs initrd=initrd-cb-test-tgt-x86_64 rootfstype=nfs nfsroot=10.100.1.100:/nfsroots/cb-test-tgt-01,v3,hard,nointr,tcp ip=10.100.1.10::10.100.1.1:255.255.255.0:embed-o-matic:eth0:off console=ttyS0,115200n8 consoleblank=0 rw BOOT_IMAGE=vmlinuz-cb-test-tgt-x86_64 |
| [ 0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes) |
| [ 0.000000] AGP: Checking aperture... |
| [ 0.000000] AGP: No AGP bridge found |
| [ 0.000000] AGP: Node 0: aperture [bus addr 0xe5ea000000-0xe5ebffffff] (32MB) |
| [ 0.000000] Aperture beyond 4GB. Ignoring. |
| [ 0.000000] AGP: Your BIOS doesn't leave a aperture memory hole |
| [ 0.000000] AGP: Please enable the IOMMU option in the BIOS setup |
| [ 0.000000] AGP: This costs you 64MB of RAM |
| [ 0.000000] AGP: Mapping aperture over RAM [mem 0xb4000000-0xb7ffffff] (65536KB) |
| [ 0.000000] PM: Registered nosave memory: [mem 0xb4000000-0xb7ffffff] |
| [ 0.000000] Memory: 5012208K/5242080K available (5207K kernel code, 946K rwdata, 1832K rodata, 1204K init, 840K bss, 229872K reserved) |
| [ 0.000000] Hierarchical RCU implementation. |
| [ 0.000000] RCU dyntick-idle grace-period acceleration is enabled. |
| [ 0.000000] RCU restricting CPUs from NR_CPUS=512 to nr_cpu_ids=8. |
| [ 0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=8 |
| [ 0.000000] NR_IRQS:33024 nr_irqs:744 16 |
| [ 0.000000] spurious 8259A interrupt: IRQ7. |
| [ 0.000000] Console: colour *CGA 80x25 |
| [ 0.000000] console [ttyS0] enabled |
| [ 0.000000] mempolicy: Disabling automatic NUMA balancing. Configure with numa_balancing= or the kernel.numa_balancing sysctl |
| [ 0.000000] hpet clockevent registered |
| [ 0.000000] tsc: Fast TSC calibration using PIT |
| [ 0.000000] tsc: Detected 1909.643 MHz processor |
| [ 0.000158] Calibrating delay loop (skipped), value calculated using timer frequency.. 3819.28 BogoMIPS (lpj=7638572) |
| [ 0.010795] pid_max: default: 32768 minimum: 301 |
| [ 0.015441] ACPI: Core revision 20140424 |
| [ 0.021836] ACPI: All ACPI Tables successfully acquired |
| [ 0.027186] Security Framework initialized |
| [ 0.031305] AppArmor: AppArmor disabled by boot time parameter |
| [ 0.037141] Yama: disabled by default; enable with sysctl kernel.yama.* |
| [ 0.044867] Dentry cache hash table entries: 1048576 (order: 11, 8388608 bytes) |
| [ 0.058010] Inode-cache hash table entries: 524288 (order: 10, 4194304 bytes) |
| [ 0.067752] Mount-cache hash table entries: 16384 (order: 5, 131072 bytes) |
| [ 0.074652] Mountpoint-cache hash table entries: 16384 (order: 5, 131072 bytes) |
| [ 0.082507] Initializing cgroup subsys memory |
| [ 0.086891] Initializing cgroup subsys devices |
| [ 0.091359] Initializing cgroup subsys freezer |
| [ 0.095823] Initializing cgroup subsys net_cls |
| [ 0.100280] Initializing cgroup subsys blkio |
| [ 0.104575] Initializing cgroup subsys perf_event |
| [ 0.109294] Initializing cgroup subsys net_prio |
| [ 0.113882] tseg: 0000000000 |
| [ 0.113893] CPU: Physical Processor ID: 0 |
| [ 0.117921] CPU: Processor Core ID: 0 |
| [ 0.121603] mce: CPU supports 6 MCE banks |
| [ 0.125639] LVT offset 0 assigned for vector 0xf9 |
| [ 0.130360] Last level iTLB entries: 4KB 512, 2MB 16, 4MB 8 |
| Last level dTLB entries: 4KB 512, 2MB 128, 4MB 64, 1GB 0 |
| tlb_flushall_shift: 6 |
| [ 0.145708] Freeing SMP alternatives memory: 20K (ffffffff81a1b000 - ffffffff81a20000) |
| [ 0.154721] ftrace: allocating 21614 entries in 85 pages |
| [ 0.170053] ..TIMER: vector=0x30 apic1=0 pin1=0 apic2=0 pin2=0 |
| [ 0.215568] smpboot: CPU0: Quad-Core AMD Opteron(tm) Processor 8347 (fam: 10, model: 02, stepping: 01) |
| [ 0.332518] Performance Events: AMD PMU driver. |
| [ 0.337098] ... version: 0 |
| [ 0.341109] ... bit width: 48 |
| [ 0.345213] ... generic registers: 4 |
| [ 0.349228] ... value mask: 0000ffffffffffff |
| [ 0.354529] ... max period: 00007fffffffffff |
| [ 0.359849] ... fixed-purpose events: 0 |
| [ 0.363879] ... event mask: 000000000000000f |
| [ 0.371739] NMI watchdog: enabled on all CPUs, permanently consumes one hw-PMU counter. |
| [ 0.379944] x86: Booting SMP configuration: |
| [ 0.384141] .... node #0, CPUs: #1 #2 #3 |
| [ 0.428512] .... node #1, CPUs: #4 #5 #6 #7 |
| [ 0.581159] x86: Booted up 2 nodes, 8 CPUs |
| [ 0.585462] smpboot: Total of 8 processors activated (30556.31 BogoMIPS) |
| [ 0.597997] devtmpfs: initialized |
| [ 0.609282] pinctrl core: initialized pinctrl subsystem |
| [ 0.614683] NET: Registered protocol family 16 |
| [ 0.619342] cpuidle: using governor ladder |
| [ 0.623445] cpuidle: using governor menu |
| [ 0.627383] node 0 link 1: io port [1000, 3fff] |
| [ 0.627386] TOM: 00000000c0000000 aka 3072M |
| [ 0.631580] Fam 10h mmconf [mem 0xc0000000-0xcfffffff] |
| [ 0.631583] node 0 link 1: mmio [fc000000, fc3fffff] |
| [ 0.631587] node 0 link 1: mmio [f8000000, fbffffff] |
| [ 0.631589] TOM2: 0000000180000000 aka 6144M |
| [ 0.635868] bus: [bus 00-05] on node 0 link 1 |
| [ 0.635870] bus: 00 [io 0x0000-0xffff] |
| [ 0.635872] bus: 00 [mem 0xd0000000-0xffffffff] |
| [ 0.635874] bus: 00 [mem 0x180000000-0xfcffffffff] |
| [ 0.635982] ACPI: bus type PCI registered |
| [ 0.640002] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5 |
| [ 0.646603] PCI: Using configuration type 1 for base access |
| [ 0.652180] PCI: Using configuration type 1 for extended access |
| [ 0.669323] ACPI: Added _OSI(Module Device) |
| [ 0.673514] ACPI: Added _OSI(Processor Device) |
| [ 0.677966] ACPI: Added _OSI(3.0 _SCP Extensions) |
| [ 0.682676] ACPI: Added _OSI(Processor Aggregator Device) |
| [ 0.691634] ACPI: Interpreter enabled |
| [ 0.695324] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S2_] (20140424/hwxface-580) |
| [ 0.704595] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S3_] (20140424/hwxface-580) |
| [ 0.713858] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S4_] (20140424/hwxface-580) |
| [ 0.723133] ACPI: (supports S0 S1 S5) |
| [ 0.726801] ACPI: Using IOAPIC for interrupt routing |
| [ 0.731810] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug |
| [ 0.761074] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-05]) |
| [ 0.767268] acpi PNP0A03:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI] |
| [ 0.775479] acpi PNP0A03:00: _OSC: OS now controls [PCIeHotplug PME AER PCIeCapability] |
| [ 0.815858] acpi PNP0A03:00: host bridge window expanded to [io 0x0000-0x0cf7]; [io 0x03b0-0x03df] ignored |
| [ 0.825868] PCI host bridge to bus 0000:00 |
| [ 0.829971] pci_bus 0000:00: root bus resource [bus 00-05] |
| [ 0.835461] pci_bus 0000:00: root bus resource [io 0x0d00-0x3fff] |
| [ 0.841646] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff] |
| [ 0.848525] pci_bus 0000:00: root bus resource [mem 0xf8000000-0xfbffffff] |
| [ 0.855396] pci_bus 0000:00: root bus resource [mem 0xfc000000-0xfc3fffff] |
| [ 0.862275] pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7] |
| [ 0.868473] pci 0000:00:00.0: [10de:005e] type 00 class 0x058000 |
| [ 0.868684] pci 0000:00:01.0: [10de:0051] type 00 class 0x060100 |
| [ 0.868691] pci 0000:00:01.0: reg 0x10: [io 0x2c00-0x2c7f] |
| [ 0.868820] pci 0000:00:01.1: [10de:0052] type 00 class 0x0c0500 |
| [ 0.868828] pci 0000:00:01.1: reg 0x10: [io 0x3000-0x301f] |
| [ 0.868849] pci 0000:00:01.1: reg 0x20: [io 0x2c80-0x2cbf] |
| [ 0.868854] pci 0000:00:01.1: reg 0x24: [io 0x2cc0-0x2cff] |
| [ 0.868874] pci 0000:00:01.1: PME# supported from D3hot D3cold |
| [ 0.868979] pci 0000:00:02.0: [10de:005a] type 00 class 0x0c0310 |
| [ 0.868987] pci 0000:00:02.0: reg 0x10: [mem 0xfc300000-0xfc300fff] |
| [ 0.869038] pci 0000:00:02.0: supports D1 D2 |
| [ 0.869048] pci 0000:00:02.0: PME# supported from D0 D1 D2 D3hot D3cold |
| [ 0.869100] pci 0000:00:02.0: System wakeup disabled by ACPI |
| [ 0.874821] pci 0000:00:02.1: [10de:005b] type 00 class 0x0c0320 |
| [ 0.874830] pci 0000:00:02.1: reg 0x10: [mem 0xfc303000-0xfc3030ff] |
| [ 0.874879] pci 0000:00:02.1: supports D1 D2 |
| [ 0.874894] pci 0000:00:02.1: PME# supported from D0 D1 D2 D3hot D3cold |
| [ 0.874942] pci 0000:00:02.1: System wakeup disabled by ACPI |
| [ 0.880671] pci 0000:00:06.0: [10de:0053] type 00 class 0x01018a |
| [ 0.880705] pci 0000:00:06.0: reg 0x20: [io 0x3020-0x302f] |
| [ 0.880726] pci 0000:00:06.0: legacy IDE quirk: reg 0x10: [io 0x01f0-0x01f7] |
| [ 0.887860] pci 0000:00:06.0: legacy IDE quirk: reg 0x14: [io 0x03f6] |
| [ 0.894391] pci 0000:00:06.0: legacy IDE quirk: reg 0x18: [io 0x0170-0x0177] |
| [ 0.901520] pci 0000:00:06.0: legacy IDE quirk: reg 0x1c: [io 0x0376] |
| [ 0.908201] pci 0000:00:07.0: [10de:0054] type 00 class 0x010185 |
| [ 0.908210] pci 0000:00:07.0: reg 0x10: [io 0x3050-0x3057] |
| [ 0.908214] pci 0000:00:07.0: reg 0x14: [io 0x3070-0x3073] |
| [ 0.908219] pci 0000:00:07.0: reg 0x18: [io 0x3058-0x305f] |
| [ 0.908224] pci 0000:00:07.0: reg 0x1c: [io 0x3074-0x3077] |
| [ 0.908228] pci 0000:00:07.0: reg 0x20: [io 0x3030-0x303f] |
| [ 0.908233] pci 0000:00:07.0: reg 0x24: [mem 0xfc301000-0xfc301fff] |
| [ 0.908355] pci 0000:00:08.0: [10de:0055] type 00 class 0x010185 |
| [ 0.908367] pci 0000:00:08.0: reg 0x10: [io 0x3060-0x3067] |
| [ 0.908372] pci 0000:00:08.0: reg 0x14: [io 0x3078-0x307b] |
| [ 0.908376] pci 0000:00:08.0: reg 0x18: [io 0x3068-0x306f] |
| [ 0.908381] pci 0000:00:08.0: reg 0x1c: [io 0x307c-0x307f] |
| [ 0.908385] pci 0000:00:08.0: reg 0x20: [io 0x3040-0x304f] |
| [ 0.908390] pci 0000:00:08.0: reg 0x24: [mem 0xfc302000-0xfc302fff] |
| [ 0.908499] pci 0000:00:09.0: [10de:005c] type 01 class 0x060400 |
| [ 0.908571] pci 0000:00:09.0: System wakeup disabled by ACPI |
| [ 0.914293] pci 0000:00:0b.0: [10de:005d] type 01 class 0x060400 |
| [ 0.914345] pci 0000:00:0b.0: PME# supported from D0 D1 D2 D3hot D3cold |
| [ 0.914393] pci 0000:00:0b.0: System wakeup disabled by ACPI |
| [ 0.920111] pci 0000:00:0c.0: [10de:005d] type 01 class 0x060400 |
| [ 0.920166] pci 0000:00:0c.0: PME# supported from D0 D1 D2 D3hot D3cold |
| [ 0.920213] pci 0000:00:0c.0: System wakeup disabled by ACPI |
| [ 0.925938] pci 0000:00:0d.0: [10de:005d] type 01 class 0x060400 |
| [ 0.926011] pci 0000:00:0d.0: PME# supported from D0 D1 D2 D3hot D3cold |
| [ 0.926092] pci 0000:00:0d.0: System wakeup disabled by ACPI |
| [ 0.931820] pci 0000:00:0e.0: [10de:005d] type 01 class 0x060400 |
| [ 0.931871] pci 0000:00:0e.0: PME# supported from D0 D1 D2 D3hot D3cold |
| [ 0.931965] pci 0000:00:0e.0: System wakeup disabled by ACPI |
| [ 0.937710] pci 0000:00:18.0: [1022:1200] type 00 class 0x060000 |
| [ 0.937871] pci 0000:00:18.1: [1022:1201] type 00 class 0x060000 |
| [ 0.937977] pci 0000:00:18.2: [1022:1202] type 00 class 0x060000 |
| [ 0.938127] pci 0000:00:18.3: [1022:1203] type 00 class 0x060000 |
| [ 0.938256] pci 0000:00:18.4: [1022:1204] type 00 class 0x060000 |
| [ 0.938383] pci 0000:00:19.0: [1022:1200] type 00 class 0x060000 |
| [ 0.938533] pci 0000:00:19.1: [1022:1201] type 00 class 0x060000 |
| [ 0.938683] pci 0000:00:19.2: [1022:1202] type 00 class 0x060000 |
| [ 0.938840] pci 0000:00:19.3: [1022:1203] type 00 class 0x060000 |
| [ 0.939029] pci 0000:00:19.4: [1022:1204] type 00 class 0x060000 |
| [ 0.939259] pci 0000:01:04.0: [18ca:0020] type 00 class 0x030000 |
| [ 0.939284] pci 0000:01:04.0: reg 0x10: [mem 0xf8000000-0xfbffffff pref] |
| [ 0.939298] pci 0000:01:04.0: reg 0x14: [mem 0xfc000000-0xfc03ffff] |
| [ 0.939312] pci 0000:01:04.0: reg 0x18: [io 0x1000-0x107f] |
| [ 0.939360] pci 0000:01:04.0: supports D1 D2 |
| [ 0.939481] pci 0000:00:09.0: PCI bridge to [bus 01] |
| [ 0.944460] pci 0000:00:09.0: bridge window [io 0x1000-0x1fff] |
| [ 0.944463] pci 0000:00:09.0: bridge window [mem 0xfc000000-0xfc0fffff] |
| [ 0.944466] pci 0000:00:09.0: bridge window [mem 0xf8000000-0xfbffffff pref] |
| [ 0.944572] pci 0000:02:00.0: [14e4:1659] type 00 class 0x020000 |
| [ 0.944630] pci 0000:02:00.0: reg 0x10: [mem 0xfc100000-0xfc10ffff 64bit] |
| [ 0.944658] pci 0000:02:00.0: reg 0x30: [mem 0x7b630000-0x7b63ffff pref] |
| [ 0.944767] pci 0000:02:00.0: PME# supported from D3hot D3cold |
| [ 0.944867] pci 0000:02:00.0: disabling ASPM on pre-1.1 PCIe device. You can enable it with 'pcie_aspm=force' |
| [ 0.954870] pci 0000:00:0b.0: PCI bridge to [bus 02] |
| [ 0.959838] pci 0000:00:0b.0: bridge window [mem 0xfc100000-0xfc1fffff] |
| [ 0.959928] pci 0000:03:00.0: [14e4:1659] type 00 class 0x020000 |
| [ 0.959964] pci 0000:03:00.0: reg 0x10: [mem 0xfc200000-0xfc20ffff 64bit] |
| [ 0.960067] pci 0000:03:00.0: PME# supported from D3hot D3cold |
| [ 0.960160] pci 0000:03:00.0: disabling ASPM on pre-1.1 PCIe device. You can enable it with 'pcie_aspm=force' |
| [ 0.970160] pci 0000:00:0c.0: PCI bridge to [bus 03] |
| [ 0.975130] pci 0000:00:0c.0: bridge window [mem 0xfc200000-0xfc2fffff] |
| [ 0.975201] pci 0000:00:0d.0: PCI bridge to [bus 04] |
| [ 0.980245] pci 0000:00:0e.0: PCI bridge to [bus 05] |
| [ 0.985230] pci_bus 0000:00: on NUMA node 0 |
| [ 0.985331] ACPI: PCI Interrupt Link [LNKA] (IRQs *16 17 18 19) |
| [ 0.991466] ACPI: PCI Interrupt Link [LNKB] (IRQs 16 *17 18 19) |
| [ 0.997607] ACPI: PCI Interrupt Link [LNKC] (IRQs 16 17 18 19) *0, disabled. |
| [ 1.004908] ACPI: PCI Interrupt Link [LNKD] (IRQs 16 17 18 19) *0, disabled. |
| [ 1.012208] ACPI: PCI Interrupt Link [LNKE] (IRQs 16 17 18 19) *0, disabled. |
| [ 1.019503] ACPI: PCI Interrupt Link [LLAS] (IRQs 20 21 22 23) *0, disabled. |
| [ 1.026816] ACPI: PCI Interrupt Link [LUOH] (IRQs 20 21 22 *23) |
| [ 1.032962] ACPI: PCI Interrupt Link [LUEH] (IRQs 20 21 *22 23) |
| [ 1.039095] ACPI: PCI Interrupt Link [LAUD] (IRQs 20 21 22 23) *0, disabled. |
| [ 1.046394] ACPI: PCI Interrupt Link [LMOD] (IRQs 20 21 22 23) *0, disabled. |
| [ 1.053708] ACPI: PCI Interrupt Link [LPA0] (IRQs 20 21 22 23) *0, disabled. |
| [ 1.061014] ACPI: PCI Interrupt Link [LSA0] (IRQs 20 *21 22 23) |
| [ 1.067138] ACPI: PCI Interrupt Link [LSA1] (IRQs *20 21 22 23) |
| [ 1.073281] ACPI: PCI Interrupt Link [LEMA] (IRQs 20 21 22 23) *0, disabled. |
| [ 1.080573] ACPI: PCI Interrupt Link [LUB0] (IRQs 20 21 22 23) *0, disabled. |
| [ 1.087877] ACPI: PCI Interrupt Link [LUB2] (IRQs 20 21 22 23) *0, disabled. |
| [ 1.095179] ACPI: PCI Interrupt Link [LKSM] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled. |
| [ 1.103699] ACPI: PCI Interrupt Link [LNIA] (IRQs 16) *0, disabled. |
| [ 1.110158] ACPI: PCI Interrupt Link [LNIB] (IRQs 17) *0, disabled. |
| [ 1.116612] ACPI: PCI Interrupt Link [LNIC] (IRQs 18) *0, disabled. |
| [ 1.123068] ACPI: PCI Interrupt Link [LNND] (IRQs 19) *0, disabled. |
| [ 1.129843] ACPI: Enabled 1 GPEs in block 00 to 1F |
| [ 1.134966] vgaarb: setting as boot device: PCI:0000:01:04.0 |
| [ 1.140638] vgaarb: device added: PCI:0000:01:04.0,decodes=io+mem,owns=io+mem,locks=none |
| [ 1.148734] vgaarb: loaded |
| [ 1.151452] vgaarb: bridge control possible 0000:01:04.0 |
| [ 1.156932] PCI: Using ACPI for IRQ routing |
| [ 1.161125] PCI: pci_cache_line_size set to 64 bytes |
| [ 1.161190] e820: reserve RAM buffer [mem 0x0009fc00-0x0009ffff] |
| [ 1.161194] e820: reserve RAM buffer [mem 0xbff9a000-0xbfffffff] |
| [ 1.161508] HPET: 3 timers in total, 0 timers will be used for per-cpu timer |
| [ 1.168557] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 31 |
| [ 1.173620] hpet0: 3 comparators, 32-bit 25.000000 MHz counter |
| [ 1.182310] Switched to clocksource hpet |
| [ 1.197903] pnp: PnP ACPI init |
| [ 1.201012] ACPI: bus type PNP registered |
| [ 1.205540] pnp 00:00: Plug and Play ACPI device, IDs PNP0303 PNP030b (active) |
| [ 1.205625] pnp 00:01: Plug and Play ACPI device, IDs PNP0f03 PNP0f13 (active) |
| [ 1.205706] pnp 00:02: Plug and Play ACPI device, IDs PNP0501 (active) |
| [ 1.205804] pnp 00:03: Plug and Play ACPI device, IDs PNP0501 (active) |
| [ 1.205841] pnp 00:04: [dma 2] |
| [ 1.205888] pnp 00:04: Plug and Play ACPI device, IDs PNP0700 (active) |
| [ 1.205919] pnp: PnP ACPI: found 5 devices |
| [ 1.210028] ACPI: bus type PNP unregistered |
| [ 1.222052] pci 0000:02:00.0: can't claim BAR 6 [mem 0x7b630000-0x7b63ffff pref]: no compatible bridge window |
| [ 1.232006] pci 0000:00:09.0: PCI bridge to [bus 01] |
| [ 1.236982] pci 0000:00:09.0: bridge window [io 0x1000-0x1fff] |
| [ 1.243090] pci 0000:00:09.0: bridge window [mem 0xfc000000-0xfc0fffff] |
| [ 1.249884] pci 0000:00:09.0: bridge window [mem 0xf8000000-0xfbffffff pref] |
| [ 1.257118] pci 0000:02:00.0: BAR 6: assigned [mem 0xfc110000-0xfc11ffff pref] |
| [ 1.264342] pci 0000:00:0b.0: PCI bridge to [bus 02] |
| [ 1.269313] pci 0000:00:0b.0: bridge window [mem 0xfc100000-0xfc1fffff] |
| [ 1.276110] pci 0000:00:0c.0: PCI bridge to [bus 03] |
| [ 1.281082] pci 0000:00:0c.0: bridge window [mem 0xfc200000-0xfc2fffff] |
| [ 1.287875] pci 0000:00:0d.0: PCI bridge to [bus 04] |
| [ 1.292849] pci 0000:00:0e.0: PCI bridge to [bus 05] |
| [ 1.297822] pci_bus 0000:00: resource 4 [io 0x0d00-0x3fff] |
| [ 1.297825] pci_bus 0000:00: resource 5 [mem 0x000a0000-0x000bffff] |
| [ 1.297828] pci_bus 0000:00: resource 6 [mem 0xf8000000-0xfbffffff] |
| [ 1.297830] pci_bus 0000:00: resource 7 [mem 0xfc000000-0xfc3fffff] |
| [ 1.297833] pci_bus 0000:00: resource 8 [io 0x0000-0x0cf7] |
| [ 1.297836] pci_bus 0000:01: resource 0 [io 0x1000-0x1fff] |
| [ 1.297839] pci_bus 0000:01: resource 1 [mem 0xfc000000-0xfc0fffff] |
| [ 1.297841] pci_bus 0000:01: resource 2 [mem 0xf8000000-0xfbffffff pref] |
| [ 1.297844] pci_bus 0000:02: resource 1 [mem 0xfc100000-0xfc1fffff] |
| [ 1.297847] pci_bus 0000:03: resource 1 [mem 0xfc200000-0xfc2fffff] |
| [ 1.297988] NET: Registered protocol family 2 |
| [ 1.302870] TCP established hash table entries: 65536 (order: 7, 524288 bytes) |
| [ 1.310552] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes) |
| [ 1.317881] TCP: Hash tables configured (established 65536 bind 65536) |
| [ 1.324492] TCP: reno registered |
| [ 1.327752] UDP hash table entries: 4096 (order: 5, 131072 bytes) |
| [ 1.333954] UDP-Lite hash table entries: 4096 (order: 5, 131072 bytes) |
| [ 1.340745] NET: Registered protocol family 1 |
| [ 1.345494] ACPI: PCI Interrupt Link [LUB0] enabled at IRQ 23 |
| [ 1.351572] ACPI: PCI Interrupt Link [LUB2] enabled at IRQ 22 |
| [ 1.357491] pci 0000:00:00.0: Found enabled HT MSI Mapping |
| [ 1.363019] pci 0000:00:00.0: Found enabled HT MSI Mapping |
| [ 1.368535] pci 0000:00:0b.0: Found disabled HT MSI Mapping |
| [ 1.374118] pci 0000:00:00.0: Found enabled HT MSI Mapping |
| [ 1.379665] pci 0000:00:00.0: Found enabled HT MSI Mapping |
| [ 1.385176] pci 0000:00:0c.0: Found disabled HT MSI Mapping |
| [ 1.390759] pci 0000:00:00.0: Found enabled HT MSI Mapping |
| [ 1.396307] pci 0000:00:00.0: Found enabled HT MSI Mapping |
| [ 1.401820] pci 0000:00:0d.0: Found disabled HT MSI Mapping |
| [ 1.407407] pci 0000:00:00.0: Found enabled HT MSI Mapping |
| [ 1.412951] pci 0000:00:00.0: Found enabled HT MSI Mapping |
| [ 1.418464] pci 0000:00:0e.0: Found disabled HT MSI Mapping |
| [ 1.424045] pci 0000:00:00.0: Found enabled HT MSI Mapping |
| [ 1.429573] pci 0000:01:04.0: Video device with shadowed ROM |
| [ 1.429582] PCI: CLS 64 bytes, default 64 |
| [ 1.429697] Unpacking initramfs... |
| [ 1.813264] Freeing initrd memory: 14028K (ffff88007f24c000 - ffff88007ffff000) |
| [ 1.821206] PCI-DMA: Disabling AGP. |
| [ 1.824880] PCI-DMA: aperture base @ b4000000 size 65536 KB |
| [ 1.830465] PCI-DMA: using GART IOMMU. |
| [ 1.834225] PCI-DMA: Reserving 64MB of IOMMU area in the AGP aperture |
| [ 1.846265] platform rtc_cmos: registered platform RTC device (no PNP device found) |
| [ 1.854438] microcode: CPU0: patch_level=0x01000084 |
| [ 1.859331] microcode: CPU1: patch_level=0x01000084 |
| [ 1.864225] microcode: CPU2: patch_level=0x01000084 |
| [ 1.869128] microcode: CPU3: patch_level=0x01000084 |
| [ 1.874032] microcode: CPU4: patch_level=0x01000084 |
| [ 1.878922] microcode: CPU5: patch_level=0x01000084 |
| [ 1.883816] microcode: CPU6: patch_level=0x01000084 |
| [ 1.888715] microcode: CPU7: patch_level=0x01000084 |
| [ 1.893707] microcode: Microcode Update Driver: v2.00 <tigran@aivazian.fsnet.co.uk>, Peter Oruba |
| [ 1.902504] LVT offset 1 assigned for vector 0x400 |
| [ 1.907310] IBS: LVT offset 1 assigned |
| [ 1.911098] perf: AMD IBS detected (0x00000007) |
| [ 1.916251] futex hash table entries: 2048 (order: 5, 131072 bytes) |
| [ 1.922642] audit: initializing netlink subsys (disabled) |
| [ 1.928071] audit: type=2000 audit(1482772138.660:1): initialized |
| [ 1.934955] HugeTLB registered 2 MB page size, pre-allocated 0 pages |
| [ 1.941356] zbud: loaded |
| [ 1.944272] VFS: Disk quotas dquot_6.5.2 |
| [ 1.948248] Dquot-cache hash table entries: 512 (order 0, 4096 bytes) |
| [ 1.954800] msgmni has been set to 9945 |
| [ 1.959179] alg: No test for stdrng (krng) |
| [ 1.963340] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252) |
| [ 1.970842] io scheduler noop registered |
| [ 1.974775] io scheduler deadline registered |
| [ 1.979128] io scheduler cfq registered (default) |
| [ 1.984060] pcieport 0000:00:0b.0: irq 40 for MSI/MSI-X |
| [ 1.984186] pcieport 0000:00:0c.0: irq 41 for MSI/MSI-X |
| [ 1.984295] pcieport 0000:00:0d.0: irq 42 for MSI/MSI-X |
| [ 1.984427] pcieport 0000:00:0e.0: irq 43 for MSI/MSI-X |
| [ 1.984595] aer 0000:00:0b.0:pcie02: service driver aer loaded |
| [ 1.984619] aer 0000:00:0c.0:pcie02: service driver aer loaded |
| [ 1.984643] aer 0000:00:0d.0:pcie02: service driver aer loaded |
| [ 1.984665] aer 0000:00:0e.0:pcie02: service driver aer loaded |
| [ 1.984689] pcieport 0000:00:0b.0: Signaling PME through PCIe PME interrupt |
| [ 1.991661] pci 0000:02:00.0: Signaling PME through PCIe PME interrupt |
| [ 1.998189] pcie_pme 0000:00:0b.0:pcie01: service driver pcie_pme loaded |
| [ 1.998199] pcieport 0000:00:0c.0: Signaling PME through PCIe PME interrupt |
| [ 2.005162] pci 0000:03:00.0: Signaling PME through PCIe PME interrupt |
| [ 2.011695] pcie_pme 0000:00:0c.0:pcie01: service driver pcie_pme loaded |
| [ 2.011705] pcieport 0000:00:0d.0: Signaling PME through PCIe PME interrupt |
| [ 2.018667] pcie_pme 0000:00:0d.0:pcie01: service driver pcie_pme loaded |
| [ 2.018677] pcieport 0000:00:0e.0: Signaling PME through PCIe PME interrupt |
| [ 2.025643] pcie_pme 0000:00:0e.0:pcie01: service driver pcie_pme loaded |
| [ 2.025676] pci_hotplug: PCI Hot Plug PCI Core version: 0.5 |
| [ 2.031287] pciehp: PCI Express Hot Plug Controller Driver version: 0.4 |
| [ 2.038003] GHES: HEST is not enabled! |
| [ 2.041881] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled |
| [ 2.068537] 00:02: ttyS0 at I/O 0x3f8 (irq = 4, base_baud = 115200) is a 16550A |
| [ 2.096222] 00:03: ttyS1 at I/O 0x2f8 (irq = 3, base_baud = 115200) is a 16550A |
| [ 2.104130] Linux agpgart interface v0.103 |
| [ 2.108446] i8042: PNP: PS/2 Controller [PNP0303:KBD,PNP0f03:MOU] at 0x60,0x64 irq 1,12 |
| [ 2.118995] serio: i8042 KBD port at 0x60,0x64 irq 1 |
| [ 2.123978] serio: i8042 AUX port at 0x60,0x64 irq 12 |
| [ 2.129251] mousedev: PS/2 mouse device common for all mice |
| [ 2.134925] rtc_cmos rtc_cmos: RTC can wake from S4 |
| [ 2.140067] rtc_cmos rtc_cmos: rtc core: registered rtc_cmos as rtc0 |
| [ 2.146465] rtc_cmos rtc_cmos: alarms up to one year, y3k, 114 bytes nvram, hpet irqs |
| [ 2.154331] ledtrig-cpu: registered to indicate activity on CPUs |
| [ 2.160529] AMD IOMMUv2 driver by Joerg Roedel <joerg.roedel@amd.com> |
| [ 2.166975] AMD IOMMUv2 functionality not available on this system |
| [ 2.173306] TCP: cubic registered |
| [ 2.176792] NET: Registered protocol family 10 |
| [ 2.181682] mip6: Mobile IPv6 |
| [ 2.184676] NET: Registered protocol family 17 |
| [ 2.189205] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input0 |
| [ 2.197858] mpls_gso: MPLS GSO support |
| [ 2.202490] registered taskstats version 1 |
| [ 2.207358] rtc_cmos rtc_cmos: setting system clock to 2016-12-26 17:09:00 UTC (1482772140) |
| [ 2.215783] PM: Hibernation image not present or could not be loaded. |
| [ 2.217567] Freeing unused kernel memory: 1204K (ffffffff818ee000 - ffffffff81a1b000) |
| [ 2.225422] Write protecting the kernel read-only data: 8192k |
| [ 2.234657] Freeing unused kernel memory: 924K (ffff880001519000 - ffff880001600000) |
| [ 2.243241] Freeing unused kernel memory: 216K (ffff8800017ca000 - ffff880001800000) |
| [ 2.276938] systemd-udevd[99]: starting version 215 |
| [ 2.282664] random: systemd-udevd urandom read with 4 bits of entropy available |
| [ 2.310598] SCSI subsystem initialized |
| [ 2.315187] ACPI: bus type USB registered |
| [ 2.319358] usbcore: registered new interface driver usbfs |
| [ 2.319707] pps_core: LinuxPPS API ver. 1 registered |
| [ 2.319708] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it> |
| [ 2.326032] FDC 0 is a post-1991 82077 |
| [ 2.342794] usbcore: registered new interface driver hub |
| [ 2.348348] usbcore: registered new device driver usb |
| [ 2.348360] PTP clock support registered |
| [ 2.359261] libata version 3.00 loaded. |
| [ 2.359348] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver |
| [ 2.366377] pata_amd 0000:00:06.0: version 0.4.1 |
| [ 2.366423] tg3.c:v3.137 (May 11, 2014) |
| [ 2.367049] scsi0 : pata_amd |
| [ 2.373206] tg3 0000:02:00.0: enabling device (0004 -> 0006) |
| [ 2.373457] scsi1 : pata_amd |
| [ 2.373545] ata1: PATA max UDMA/133 cmd 0x1f0 ctl 0x3f6 bmdma 0x3020 irq 14 |
| [ 2.373547] ata2: PATA max UDMA/133 cmd 0x170 ctl 0x376 bmdma 0x3028 irq 15 |
| [ 2.396055] ACPI: PCI Interrupt Link [LNIB] enabled at IRQ 17 |
| [ 2.396108] ehci-pci: EHCI PCI platform driver |
| [ 2.396131] sata_nv 0000:00:07.0: version 3.5 |
| [ 2.406477] ACPI: PCI Interrupt Link [LSA0] enabled at IRQ 21 |
| [ 2.406499] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver |
| [ 2.419005] scsi2 : sata_nv |
| [ 2.422004] scsi3 : sata_nv |
| [ 2.424872] ata3: SATA max UDMA/133 cmd 0x3050 ctl 0x3070 bmdma 0x3030 irq 21 |
| [ 2.432015] ata4: SATA max UDMA/133 cmd 0x3058 ctl 0x3074 bmdma 0x3038 irq 21 |
| [ 2.439382] ACPI: PCI Interrupt Link [LSA1] enabled at IRQ 20 |
| [ 2.445574] scsi4 : sata_nv |
| [ 2.448522] scsi5 : sata_nv |
| [ 2.451386] ata5: SATA max UDMA/133 cmd 0x3060 ctl 0x3078 bmdma 0x3040 irq 20 |
| [ 2.457467] tg3 0000:02:00.0 eth0: Tigon3 [partno(BCM95721) rev 4201] (PCI Express) MAC address 00:1e:8c:51:61:a2 |
| [ 2.457469] tg3 0000:02:00.0 eth0: attached PHY is 5750 (10/100/1000Base-T Ethernet) (WireSpeed[1], EEE[0]) |
| [ 2.457471] tg3 0000:02:00.0 eth0: RXcsums[1] LinkChgREG[0] MIirq[0] ASF[0] TSOcap[1] |
| [ 2.457473] tg3 0000:02:00.0 eth0: dma_rwctrl[76180000] dma_mask[64-bit] |
| [ 2.457599] tg3 0000:03:00.0: enabling device (0004 -> 0006) |
| [ 2.457790] ACPI: PCI Interrupt Link [LNIA] enabled at IRQ 16 |
| [ 2.504435] ata6: SATA max UDMA/133 cmd 0x3068 ctl 0x307c bmdma 0x3048 irq 20 |
| [ 2.511825] ehci-pci 0000:00:02.1: EHCI Host Controller |
| [ 2.517108] ehci-pci 0000:00:02.1: new USB bus registered, assigned bus number 1 |
| [ 2.524554] ehci-pci 0000:00:02.1: debug port 1 |
| [ 2.529154] ehci-pci 0000:00:02.1: cache line size of 64 is not supported |
| [ 2.529179] ehci-pci 0000:00:02.1: irq 22, io mem 0xfc303000 |
| [ 2.545853] ehci-pci 0000:00:02.1: USB 2.0 started, EHCI 1.00 |
| [ 2.551681] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002 |
| [ 2.558481] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 |
| [ 2.565709] usb usb1: Product: EHCI Host Controller |
| [ 2.566814] tg3 0000:03:00.0 eth1: Tigon3 [partno(BCM95721) rev 4201] (PCI Express) MAC address 00:1e:8c:51:63:95 |
| [ 2.566817] tg3 0000:03:00.0 eth1: attached PHY is 5750 (10/100/1000Base-T Ethernet) (WireSpeed[1], EEE[0]) |
| [ 2.566819] tg3 0000:03:00.0 eth1: RXcsums[1] LinkChgREG[0] MIirq[0] ASF[0] TSOcap[1] |
| [ 2.566821] tg3 0000:03:00.0 eth1: dma_rwctrl[76180000] dma_mask[64-bit] |
| [ 2.605135] usb usb1: Manufacturer: Linux 3.16.0-4-amd64 ehci_hcd |
| [ 2.611263] usb usb1: SerialNumber: 0000:00:02.1 |
| [ 2.616119] hub 1-0:1.0: USB hub found |
| [ 2.619882] hub 1-0:1.0: 10 ports detected |
| [ 2.625088] ohci-pci: OHCI PCI platform driver |
| [ 2.629730] ohci-pci 0000:00:02.0: OHCI PCI host controller |
| [ 2.635322] ohci-pci 0000:00:02.0: new USB bus registered, assigned bus number 2 |
| [ 2.642768] ohci-pci 0000:00:02.0: irq 23, io mem 0xfc300000 |
| [ 2.703843] usb usb2: New USB device found, idVendor=1d6b, idProduct=0001 |
| [ 2.710640] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1 |
| [ 2.717862] usb usb2: Product: OHCI PCI host controller |
| [ 2.723092] usb usb2: Manufacturer: Linux 3.16.0-4-amd64 ohci_hcd |
| [ 2.729194] usb usb2: SerialNumber: 0000:00:02.0 |
| [ 2.734093] hub 2-0:1.0: USB hub found |
| [ 2.737872] hub 2-0:1.0: 10 ports detected |
| [ 2.749808] ata3: SATA link down (SStatus 0 SControl 300) |
| [ 2.821767] ata5: SATA link down (SStatus 0 SControl 300) |
| [ 2.845754] tsc: Refined TSC clocksource calibration: 1909.786 MHz |
| [ 3.065674] ata4: SATA link down (SStatus 0 SControl 300) |
| [ 3.381561] ata6: SATA link down (SStatus 0 SControl 300) |
| [ 3.406088] FS-Cache: Loaded |
| [ 3.414101] RPC: Registered named UNIX socket transport module. |
| [ 3.421038] RPC: Registered udp transport module. |
| [ 3.427124] RPC: Registered tcp transport module. |
| [ 3.433212] RPC: Registered tcp NFSv4.1 backchannel transport module. |
| [ 3.446941] FS-Cache: Netfs 'nfs' registered for caching |
| [ 3.464566] tg3 0000:02:00.0: irq 44 for MSI/MSI-X |
| [ 3.509674] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready |
| [ 3.849514] Switched to clocksource tsc |
| [ 6.333044] tg3 0000:02:00.0 eth0: Link is up at 1000 Mbps, full duplex |
| [ 6.339661] tg3 0000:02:00.0 eth0: Flow control is on for TX and on for RX |
| [ 6.346547] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready |
| [ 6.661945] systemd[1]: systemd 215 running in system mode. (+PAM +AUDIT +SELINUX +IMA +SYSVINIT +LIBCRYPTSETUP +GCRYPT +ACL +XZ -SECCOMP -APPARMOR) |
| [ 6.675955] systemd[1]: Detected architecture 'x86-64'. |
| [ 6.721416] systemd[1]: Inserted module 'autofs4' |
| [ 6.728179] systemd[1]: Set hostname to <cb-test-tgt>. |
| [ 6.891912] systemd[1]: Cannot add dependency job for unit dbus.socket, ignoring: Unit dbus.socket failed to load: No such file or directory. |
| [ 6.904637] systemd[1]: Cannot add dependency job for unit display-manager.service, ignoring: Unit display-manager.service failed to load: No such file or directory. |
| [ 6.920031] systemd[1]: Expecting device dev-ttyS0.device... |
| [ 6.936393] systemd[1]: Starting Forward Password Requests to Wall Directory Watch. |
| [ 6.944115] systemd[1]: Started Forward Password Requests to Wall Directory Watch. |
| [ 6.951704] systemd[1]: Starting Remote File Systems (Pre). |
| [ 6.968441] systemd[1]: Reached target Remote File Systems (Pre). |
| [ 6.974621] systemd[1]: Starting Encrypted Volumes. |
| [ 6.988359] systemd[1]: Reached target Encrypted Volumes. |
| [ 6.993804] systemd[1]: Starting Arbitrary Executable File Formats File System Automount Point. |
| [ 7.016360] systemd[1]: Set up automount Arbitrary Executable File Formats File System Automount Point. |
| [ 7.025798] systemd[1]: Starting Dispatch Password Requests to Console Directory Watch. |
| [ 7.033890] systemd[1]: Started Dispatch Password Requests to Console Directory Watch. |
| [ 7.041817] systemd[1]: Starting Paths. |
| [ 7.056419] systemd[1]: Reached target Paths. |
| [ 7.060859] systemd[1]: Starting Swap. |
| [ 7.072330] systemd[1]: Reached target Swap. |
| [ 7.076627] systemd[1]: Starting Root Slice. |
| [ 7.088323] systemd[1]: Created slice Root Slice. |
| [ 7.093049] systemd[1]: Starting User and Session Slice. |
| [ 7.108328] systemd[1]: Created slice User and Session Slice. |
| [ 7.114098] systemd[1]: Starting Delayed Shutdown Socket. |
| [ 7.128299] systemd[1]: Listening on Delayed Shutdown Socket. |
| [ 7.134073] systemd[1]: Starting /dev/initctl Compatibility Named Pipe. |
| [ 7.152300] systemd[1]: Listening on /dev/initctl Compatibility Named Pipe. |
| [ 7.159289] systemd[1]: Starting Journal Socket (/dev/log). |
| [ 7.176305] systemd[1]: Listening on Journal Socket (/dev/log). |
| [ 7.182267] systemd[1]: Starting udev Kernel Socket. |
| [ 7.196277] systemd[1]: Listening on udev Kernel Socket. |
| [ 7.201616] systemd[1]: Starting udev Control Socket. |
| [ 7.216268] systemd[1]: Listening on udev Control Socket. |
| [ 7.221694] systemd[1]: Starting Journal Socket. |
| [ 7.236267] systemd[1]: Listening on Journal Socket. |
| [ 7.241285] systemd[1]: Starting System Slice. |
| [ 7.256260] systemd[1]: Created slice System Slice. |
| [ 7.261171] systemd[1]: Starting system-getty.slice. |
| [ 7.276261] systemd[1]: Created slice system-getty.slice. |
| [ 7.281682] systemd[1]: Starting system-serial\x2dgetty.slice. |
| [ 7.296259] systemd[1]: Created slice system-serial\x2dgetty.slice. |
| [ 7.302573] systemd[1]: Starting Increase datagram queue length... |
| [ 7.321762] systemd[1]: Starting udev Coldplug all Devices... |
| [ 7.351550] systemd[1]: Starting Load Kernel Modules... |
| [ 7.368290] systemd[1]: Started Set Up Additional Binary Formats. |
| [ 7.374739] systemd[1]: Mounting Debug File System... |
| [ 7.390025] systemd[1]: Starting Create list of required static device nodes for the current kernel... |
| [ 7.413709] systemd[1]: Mounting POSIX Message Queue File System... |
| [ 7.433512] systemd[1]: Mounting Huge Pages File System... |
| [ 7.449434] systemd[1]: Starting Slices. |
| [ 7.464259] systemd[1]: Reached target Slices. |
| [ 7.468790] systemd[1]: Starting Remount Root and Kernel File Systems... |
| [ 7.496250] systemd[1]: Mounted Huge Pages File System. |
| [ 7.512188] systemd[1]: Mounted POSIX Message Queue File System. |
| [ 7.528189] systemd[1]: Mounted Debug File System. |
| [ 7.544230] systemd[1]: Started Increase datagram queue length. |
| [ 7.560171] systemd[1]: Started Load Kernel Modules. |
| [ 7.580223] systemd[1]: Started Create list of required static device nodes for the current kernel. |
| [ 7.604197] systemd[1]: Started Remount Root and Kernel File Systems. |
| [ 7.620216] systemd[1]: Started udev Coldplug all Devices. |
| [ 7.665719] systemd[1]: Started Various fixups to make systemd work better on Debian. |
| [ 7.673608] systemd[1]: Starting Load/Save Random Seed... |
| [ 7.689878] systemd[1]: Starting Create Static Device Nodes in /dev... |
| [ 7.709548] systemd[1]: Starting Apply Kernel Variables... |
| [ 7.725736] systemd[1]: Mounted Configuration File System. |
| [ 7.731362] systemd[1]: Mounted FUSE Control File System. |
| [ 7.736794] systemd[1]: Starting Syslog Socket. |
| [ 7.752188] systemd[1]: Listening on Syslog Socket. |
| [ 7.757157] systemd[1]: Starting Sockets. |
| [ 7.772159] systemd[1]: Reached target Sockets. |
| [ 7.776771] systemd[1]: Starting Journal Service... |
| [ 7.800157] systemd[1]: Started Journal Service. |
| [ 7.878012] systemd-udevd[212]: starting version 215 |
| [ 7.992132] systemd-journald[211]: Received request to flush runtime journal from PID 1 |
| [ 8.012337] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4 |
| [ 8.022637] k10temp 0000:00:18.3: unreliable CPU thermal sensor; monitoring disabled |
| [ 8.031001] k10temp 0000:00:19.3: unreliable CPU thermal sensor; monitoring disabled |
| [ 8.041273] i2c i2c-0: nForce2 SMBus adapter at 0x2c80 |
| [ 8.041354] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input2 |
| [ 8.041363] ACPI: Power Button [PWRB] |
| [ 8.041408] EDAC MC: Ver: 3.0.0 |
| [ 8.041452] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input3 |
| [ 8.041454] ACPI: Power Button [PWRF] |
| [ 8.041559] acpi-cpufreq: overriding BIOS provided _PSD data |
| [ 8.078977] i2c i2c-1: nForce2 SMBus adapter at 0x2cc0 |
| [ 8.093721] input: PC Speaker as /devices/platform/pcspkr/input/input4 |
| [ 8.101894] kvm: Nested Virtualization enabled |
| [ 8.106557] MCE: In-kernel MCE decoding enabled. |
| [ 8.108376] kvm: Nested Paging enabled |
| [ 8.119848] AMD64 EDAC driver v3.4.0 |
| [ 8.123564] EDAC amd64: DRAM ECC enabled. |
| [ 8.127601] EDAC amd64: F10h detected (node 0). |
| [ 8.132183] EDAC MC: DCT0 chip selects: |
| [ 8.132186] EDAC amd64: MC: 0: 0MB 1: 0MB |
| [ 8.136895] EDAC amd64: MC: 2: 0MB 3: 0MB |
| [ 8.136902] EDAC amd64: MC: 4: 0MB 5: 0MB |
| [ 8.136903] EDAC amd64: MC: 6: 1024MB 7: 1024MB |
| [ 8.136905] EDAC MC: DCT1 chip selects: |
| [ 8.136906] EDAC amd64: MC: 0: 0MB 1: 0MB |
| [ 8.136907] EDAC amd64: MC: 2: 0MB 3: 0MB |
| [ 8.136907] EDAC amd64: MC: 4: 0MB 5: 0MB |
| [ 8.136908] EDAC amd64: MC: 6: 1024MB 7: 1024MB |
| [ 8.136909] EDAC amd64: using x4 syndromes. |
| [ 8.136910] EDAC amd64: MCT channel count: 2 |
| [ 8.136950] EDAC amd64: CS6: Registered DDR2 RAM |
| [ 8.136951] EDAC amd64: CS7: Registered DDR2 RAM |
| [ 8.137217] EDAC MC0: Giving out device to module amd64_edac controller F10h: DEV 0000:00:18.2 (INTERRUPT) |
| [ 8.137292] EDAC amd64: DRAM ECC enabled. |
| [ 8.137309] EDAC amd64: F10h detected (node 1). |
| [ 8.137335] EDAC MC: DCT0 chip selects: |
| [ 8.137336] EDAC amd64: MC: 0: 1024MB 1: 0MB |
| [ 8.137337] EDAC amd64: MC: 2: 0MB 3: 0MB |
| [ 8.137338] EDAC amd64: MC: 4: 0MB 5: 0MB |
| [ 8.137339] EDAC amd64: MC: 6: 0MB 7: 0MB |
| [ 8.137340] EDAC MC: DCT1 chip selects: |
| [ 8.137340] EDAC amd64: MC: 0: 0MB 1: 0MB |
| [ 8.137341] EDAC amd64: MC: 2: 0MB 3: 0MB |
| [ 8.137343] EDAC amd64: MC: 4: 0MB 5: 0MB |
| [ 8.137344] EDAC amd64: MC: 6: 0MB 7: 0MB |
| [ 8.137345] EDAC amd64: using x4 syndromes. |
| [ 8.137345] EDAC amd64: MCT channel count: 1 |
| [ 8.137381] EDAC amd64: CS0: Registered DDR2 RAM |
| [ 8.137545] EDAC MC1: Giving out device to module amd64_edac controller F10h: DEV 0000:00:19.2 (INTERRUPT) |
| [ 8.137623] EDAC PCI0: Giving out device to module amd64_edac controller EDAC PCI controller: DEV 0000:00:18.2 (POLLED) |
| [ 8.404922] random: nonblocking pool is initialized |
| [ 38.570033] *****RAPTOR ENGINEERING AUTOMATED TEST BOOT SUCCESS***** |