| [ 0.000000] Initializing cgroup subsys cpuset |
| [ 0.000000] Initializing cgroup subsys cpu |
| [ 0.000000] Initializing cgroup subsys cpuacct |
| [ 0.000000] Linux version 3.16.0-4-amd64 (debian-kernel@lists.debian.org) (gcc version 4.8.4 (Debian 4.8.4-1) ) #1 SMP Debian 3.16.7-ckt7-1 (2015-03-01) |
| [ 0.000000] Command line: root=/dev/nfs initrd=initrd-cb-test-tgt rootfstype=nfs nfsroot=192.168.1.50:/mnt/udata/nfsroots/cb-test-tgt,v3,hard,nointr,tcp ip=192.168.20.36::192.168.20.1:255.255.255.0:embed-o-matic:eth0:off console=tty0 console=ttyS0,115200n8 rw BOOT_IMAGE=vmlinuz-cb-test-tgt |
| [ 0.000000] e820: BIOS-provided physical RAM map: |
| [ 0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009fbff] usable |
| [ 0.000000] BIOS-e820: [mem 0x000000000009fc00-0x000000000009ffff] reserved |
| [ 0.000000] BIOS-e820: [mem 0x00000000000f0000-0x00000000000fffff] reserved |
| [ 0.000000] BIOS-e820: [mem 0x0000000000100000-0x00000000dffaefff] usable |
| [ 0.000000] BIOS-e820: [mem 0x00000000dffaf000-0x00000000efffffff] reserved |
| [ 0.000000] BIOS-e820: [mem 0x0000000100000000-0x000000019fffffff] usable |
| [ 0.000000] NX (Execute Disable) protection: active |
| [ 0.000000] SMBIOS 2.7 present. |
| [ 0.000000] DMI: ASUS KFSN4-DRE/KFSN4-DRE, BIOS 4.0-8317-g84c72de-dirty 03/16/2015 |
| [ 0.000000] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved |
| [ 0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable |
| [ 0.000000] AGP: No AGP bridge found |
| [ 0.000000] e820: last_pfn = 0x1a0000 max_arch_pfn = 0x400000000 |
| [ 0.000000] MTRR default type: uncachable |
| [ 0.000000] MTRR fixed ranges enabled: |
| [ 0.000000] 00000-9FFFF write-back |
| [ 0.000000] A0000-BFFFF uncachable |
| [ 0.000000] C0000-FFFFF write-back |
| [ 0.000000] MTRR variable ranges enabled: |
| [ 0.000000] 0 base 000000000000 mask FFFF80000000 write-back |
| [ 0.000000] 1 base 000080000000 mask FFFFC0000000 write-back |
| [ 0.000000] 2 base 0000C0000000 mask FFFFE0000000 write-back |
| [ 0.000000] 3 base 0000F8000000 mask FFFFFC000000 write-combining |
| [ 0.000000] 4 disabled |
| [ 0.000000] 5 disabled |
| [ 0.000000] 6 disabled |
| [ 0.000000] 7 disabled |
| [ 0.000000] TOM2: 00000001a0000000 aka 6656M |
| [ 0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106 |
| [ 0.000000] e820: last_pfn = 0xdffaf max_arch_pfn = 0x400000000 |
| [ 0.000000] found SMP MP-table at [mem 0x000f1490-0x000f149f] mapped at [ffff8800000f1490] |
| [ 0.000000] Base memory trampoline at [ffff880000099000] 99000 size 24576 |
| [ 0.000000] Using GB pages for direct mapping |
| [ 0.000000] init_memory_mapping: [mem 0x00000000-0x000fffff] |
| [ 0.000000] [mem 0x00000000-0x000fffff] page 4k |
| [ 0.000000] BRK [0x01af3000, 0x01af3fff] PGTABLE |
| [ 0.000000] BRK [0x01af4000, 0x01af4fff] PGTABLE |
| [ 0.000000] BRK [0x01af5000, 0x01af5fff] PGTABLE |
| [ 0.000000] init_memory_mapping: [mem 0x19fe00000-0x19fffffff] |
| [ 0.000000] [mem 0x19fe00000-0x19fffffff] page 2M |
| [ 0.000000] BRK [0x01af6000, 0x01af6fff] PGTABLE |
| [ 0.000000] init_memory_mapping: [mem 0x19c000000-0x19fdfffff] |
| [ 0.000000] [mem 0x19c000000-0x19fdfffff] page 2M |
| [ 0.000000] init_memory_mapping: [mem 0x180000000-0x19bffffff] |
| [ 0.000000] [mem 0x180000000-0x19bffffff] page 2M |
| [ 0.000000] init_memory_mapping: [mem 0x00100000-0xdffaefff] |
| [ 0.000000] [mem 0x00100000-0x001fffff] page 4k |
| [ 0.000000] [mem 0x00200000-0x3fffffff] page 2M |
| [ 0.000000] [mem 0x40000000-0xbfffffff] page 1G |
| [ 0.000000] [mem 0xc0000000-0xdfdfffff] page 2M |
| [ 0.000000] [mem 0xdfe00000-0xdffaefff] page 4k |
| [ 0.000000] init_memory_mapping: [mem 0x100000000-0x17fffffff] |
| [ 0.000000] [mem 0x100000000-0x17fffffff] page 1G |
| [ 0.000000] RAMDISK: [mem 0x7f775000-0x7fffefff] |
| [ 0.000000] ACPI: Early table checksum verification disabled |
| [ 0.000000] ACPI: RSDP 0x00000000000F16B0 000024 (v02 CORE ) |
| [ 0.000000] ACPI: XSDT 0x00000000DFFB80E0 000064 (v01 CORE COREBOOT 00000000 CORE 00000000) |
| [ 0.000000] ACPI: FACP 0x00000000DFFBA8A0 000074 (v01 CORE COREBOOT 00000000 CORE 00000000) |
| [ 0.000000] ACPI: DSDT 0x00000000DFFB8250 002644 (v02 ASUS COREBOOT 00000001 INTL 20140114) |
| [ 0.000000] ACPI: FACS 0x00000000DFFB8210 000040 |
| [ 0.000000] ACPI: SSDT 0x00000000DFFBA9A0 0010DF (v02 CORE COREBOOT 0000002A CORE 0000002A) |
| [ 0.000000] ACPI: APIC 0x00000000DFFBBA80 0000FE (v01 CORE COREBOOT 00000000 CORE 00000000) |
| [ 0.000000] ACPI: SRAT 0x00000000DFFBBB80 000190 (v01 CORE COREBOOT 00000000 CORE 00000000) |
| [ 0.000000] ACPI: SLIT 0x00000000DFFBBD10 000030 (v01 CORE COREBOOT 00000000 CORE 00000000) |
| [ 0.000000] ACPI: HPET 0x00000000DFFBBD40 000038 (v01 CORE COREBOOT 00000000 CORE 00000000) |
| [ 0.000000] ACPI: SRAT 0x00000000DFFBBD80 000190 (v01 CORE COREBOOT 00000000 CORE 00000000) |
| [ 0.000000] ACPI: SLIT 0x00000000DFFBBF10 000030 (v01 CORE COREBOOT 00000000 CORE 00000000) |
| [ 0.000000] ACPI: Local APIC address 0xfee00000 |
| [ 0.000000] SRAT: PXM 0 -> APIC 0x00 -> Node 0 |
| [ 0.000000] SRAT: PXM 0 -> APIC 0x01 -> Node 0 |
| [ 0.000000] SRAT: PXM 0 -> APIC 0x02 -> Node 0 |
| [ 0.000000] SRAT: PXM 0 -> APIC 0x03 -> Node 0 |
| [ 0.000000] SRAT: PXM 0 -> APIC 0x04 -> Node 0 |
| [ 0.000000] SRAT: PXM 0 -> APIC 0x05 -> Node 0 |
| [ 0.000000] SRAT: PXM 1 -> APIC 0x08 -> Node 1 |
| [ 0.000000] SRAT: PXM 1 -> APIC 0x09 -> Node 1 |
| [ 0.000000] SRAT: PXM 1 -> APIC 0x0a -> Node 1 |
| [ 0.000000] SRAT: PXM 1 -> APIC 0x0b -> Node 1 |
| [ 0.000000] SRAT: PXM 1 -> APIC 0x0c -> Node 1 |
| [ 0.000000] SRAT: PXM 1 -> APIC 0x0d -> Node 1 |
| [ 0.000000] SRAT: Node 0 PXM 0 [mem 0x00000000-0x0009ffff] |
| [ 0.000000] SRAT: Node 2 PXM 7 [mem 0x00100000-0xdfffffff] |
| [ 0.000000] SRAT: Node 0 PXM 0 [mem 0x00100000-0xdfffffff] |
| [ 0.000000] SRAT: Node 0 PXM 0 [mem 0x100000000-0x19fffffff] |
| [ 0.000000] NUMA: Initialized distance table, cnt=3 |
| [ 0.000000] NUMA: node 2 [mem 0x00100000-0xdfffffff] overlaps with node 0 [mem 0x00100000-0xdfffffff] |
| [ 0.000000] Scanning NUMA topology in Northbridge 24 |
| [ 0.000000] Number of physical nodes 2 |
| [ 0.000000] Node 0 MemBase 0000000000000000 Limit 00000001a0000000 |
| [ 0.000000] Skipping disabled node 1 |
| [ 0.000000] Initmem setup node 0 [mem 0x00000000-0x19fffffff] |
| [ 0.000000] NODE_DATA [mem 0x19fff9000-0x19fffdfff] |
| [ 0.000000] [ffffea0000000000-ffffea0005bfffff] PMD -> [ffff880199600000-ffff88019ebfffff] on node 0 |
| [ 0.000000] Zone ranges: |
| [ 0.000000] DMA [mem 0x00001000-0x00ffffff] |
| [ 0.000000] DMA32 [mem 0x01000000-0xffffffff] |
| [ 0.000000] Normal [mem 0x100000000-0x19fffffff] |
| [ 0.000000] Movable zone start for each node |
| [ 0.000000] Early memory node ranges |
| [ 0.000000] node 0: [mem 0x00001000-0x0009efff] |
| [ 0.000000] node 0: [mem 0x00100000-0xdffaefff] |
| [ 0.000000] node 0: [mem 0x100000000-0x19fffffff] |
| [ 0.000000] On node 0 totalpages: 1572685 |
| [ 0.000000] DMA zone: 56 pages used for memmap |
| [ 0.000000] DMA zone: 21 pages reserved |
| [ 0.000000] DMA zone: 3998 pages, LIFO batch:0 |
| [ 0.000000] DMA32 zone: 12487 pages used for memmap |
| [ 0.000000] DMA32 zone: 913327 pages, LIFO batch:31 |
| [ 0.000000] Normal zone: 8960 pages used for memmap |
| [ 0.000000] Normal zone: 655360 pages, LIFO batch:31 |
| [ 0.000000] ACPI: PM-Timer IO Port: 0x2008 |
| [ 0.000000] ACPI: Local APIC address 0xfee00000 |
| [ 0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled) |
| [ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled) |
| [ 0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x02] enabled) |
| [ 0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x03] enabled) |
| [ 0.000000] ACPI: LAPIC (acpi_id[0x04] lapic_id[0x04] enabled) |
| [ 0.000000] ACPI: LAPIC (acpi_id[0x05] lapic_id[0x05] enabled) |
| [ 0.000000] ACPI: LAPIC (acpi_id[0x06] lapic_id[0x08] enabled) |
| [ 0.000000] ACPI: LAPIC (acpi_id[0x07] lapic_id[0x09] enabled) |
| [ 0.000000] ACPI: LAPIC (acpi_id[0x08] lapic_id[0x0a] enabled) |
| [ 0.000000] ACPI: LAPIC (acpi_id[0x09] lapic_id[0x0b] enabled) |
| [ 0.000000] ACPI: LAPIC (acpi_id[0x0a] lapic_id[0x0c] enabled) |
| [ 0.000000] ACPI: LAPIC (acpi_id[0x0b] lapic_id[0x0d] enabled) |
| [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1]) |
| [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1]) |
| [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x02] high edge lint[0x1]) |
| [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x03] high edge lint[0x1]) |
| [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x04] high edge lint[0x1]) |
| [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x05] high edge lint[0x1]) |
| [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x06] high edge lint[0x1]) |
| [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x07] high edge lint[0x1]) |
| [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x08] high edge lint[0x1]) |
| [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x09] high edge lint[0x1]) |
| [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x0a] high edge lint[0x1]) |
| [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x0b] high edge lint[0x1]) |
| [ 0.000000] ACPI: IOAPIC (id[0x18] address[0xfec00000] gsi_base[0]) |
| [ 0.000000] IOAPIC[0]: apic_id 24, version 17, address 0xfec00000, GSI 0-23 |
| [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level) |
| [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 14 global_irq 14 high edge) |
| [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 15 global_irq 15 high edge) |
| [ 0.000000] ACPI: IRQ9 used by override. |
| [ 0.000000] ACPI: IRQ14 used by override. |
| [ 0.000000] ACPI: IRQ15 used by override. |
| [ 0.000000] Using ACPI (MADT) for SMP configuration information |
| [ 0.000000] ACPI: HPET id: 0x10de8201 base: 0xfed00000 |
| [ 0.000000] smpboot: Allowing 12 CPUs, 0 hotplug CPUs |
| [ 0.000000] nr_irqs_gsi: 40 |
| [ 0.000000] PM: Registered nosave memory: [mem 0x0009f000-0x0009ffff] |
| [ 0.000000] PM: Registered nosave memory: [mem 0x000a0000-0x000effff] |
| [ 0.000000] PM: Registered nosave memory: [mem 0x000f0000-0x000fffff] |
| [ 0.000000] PM: Registered nosave memory: [mem 0xdffaf000-0xefffffff] |
| [ 0.000000] PM: Registered nosave memory: [mem 0xf0000000-0xffffffff] |
| [ 0.000000] e820: [mem 0xf0000000-0xffffffff] available for PCI devices |
| [ 0.000000] Booting paravirtualized kernel on bare hardware |
| [ 0.000000] setup_percpu: NR_CPUS:512 nr_cpumask_bits:512 nr_cpu_ids:12 nr_node_ids:1 |
| [ 0.000000] PERCPU: Embedded 27 pages/cpu @ffff88019fc00000 s80896 r8192 d21504 u131072 |
| [ 0.000000] pcpu-alloc: s80896 r8192 d21504 u131072 alloc=1*2097152 |
| [ 0.000000] pcpu-alloc: [0] 00 01 02 03 04 05 06 07 08 09 10 11 -- -- -- -- |
| [ 0.000000] Built 1 zonelists in Node order, mobility grouping on. Total pages: 1551161 |
| [ 0.000000] Policy zone: Normal |
| [ 0.000000] Kernel command line: root=/dev/nfs initrd=initrd-cb-test-tgt rootfstype=nfs nfsroot=192.168.1.50:/mnt/udata/nfsroots/cb-test-tgt,v3,hard,nointr,tcp ip=192.168.20.36::192.168.20.1:255.255.255.0:embed-o-matic:eth0:off console=tty0 console=ttyS0,115200n8 rw BOOT_IMAGE=vmlinuz-cb-test-tgt |
| [ 0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes) |
| [ 0.000000] AGP: Checking aperture... |
| [ 0.000000] AGP: No AGP bridge found |
| [ 0.000000] AGP: Node 0: aperture [bus addr 0x7000000000-0x7001ffffff] (32MB) |
| [ 0.000000] Aperture beyond 4GB. Ignoring. |
| [ 0.000000] AGP: Your BIOS doesn't leave a aperture memory hole |
| [ 0.000000] AGP: Please enable the IOMMU option in the BIOS setup |
| [ 0.000000] AGP: This costs you 64MB of RAM |
| [ 0.000000] AGP: Mapping aperture over RAM [mem 0xd4000000-0xd7ffffff] (65536KB) |
| [ 0.000000] PM: Registered nosave memory: [mem 0xd4000000-0xd7ffffff] |
| [ 0.000000] Memory: 6049452K/6290740K available (5203K kernel code, 943K rwdata, 1832K rodata, 1204K init, 840K bss, 241288K reserved) |
| [ 0.000000] Hierarchical RCU implementation. |
| [ 0.000000] RCU dyntick-idle grace-period acceleration is enabled. |
| [ 0.000000] RCU restricting CPUs from NR_CPUS=512 to nr_cpu_ids=12. |
| [ 0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=12 |
| [ 0.000000] NR_IRQS:33024 nr_irqs:776 16 |
| [ 0.000000] spurious 8259A interrupt: IRQ7. |
| [ 0.000000] Console: colour VGA+ 80x25 |
| [ 0.000000] console [tty0] enabled |
| [ 0.000000] console [ttyS0] enabled |
| [ 0.000000] hpet clockevent registered |
| [ 0.000000] tsc: Fast TSC calibration using PIT |
| [ 0.000000] tsc: Detected 2412.427 MHz processor |
| [ 0.000032] Calibrating delay loop (skipped), value calculated using timer frequency.. 4824.85 BogoMIPS (lpj=9649708) |
| [ 0.010801] pid_max: default: 32768 minimum: 301 |
| [ 0.015497] ACPI: Core revision 20140424 |
| [ 0.021182] ACPI: All ACPI Tables successfully acquired |
| [ 0.026622] Security Framework initialized |
| [ 0.030800] AppArmor: AppArmor disabled by boot time parameter |
| [ 0.036701] Yama: disabled by default; enable with sysctl kernel.yama.* |
| [ 0.044002] Dentry cache hash table entries: 1048576 (order: 11, 8388608 bytes) |
| [ 0.056609] Inode-cache hash table entries: 524288 (order: 10, 4194304 bytes) |
| [ 0.066324] Mount-cache hash table entries: 16384 (order: 5, 131072 bytes) |
| [ 0.073305] Mountpoint-cache hash table entries: 16384 (order: 5, 131072 bytes) |
| [ 0.081166] Initializing cgroup subsys memory |
| [ 0.085603] Initializing cgroup subsys devices |
| [ 0.090132] Initializing cgroup subsys freezer |
| [ 0.094650] Initializing cgroup subsys net_cls |
| [ 0.100232] Initializing cgroup subsys blkio |
| [ 0.104569] Initializing cgroup subsys perf_event |
| [ 0.109336] Initializing cgroup subsys net_prio |
| [ 0.113964] tseg: 0000000000 |
| [ 0.113975] CPU: Physical Processor ID: 0 |
| [ 0.118059] CPU: Processor Core ID: 0 |
| [ 0.121791] mce: CPU supports 6 MCE banks |
| [ 0.125876] LVT offset 0 assigned for vector 0xf9 |
| [ 0.130655] Last level iTLB entries: 4KB 512, 2MB 16, 4MB 8 |
| Last level dTLB entries: 4KB 512, 2MB 128, 4MB 64, 1GB 0 |
| tlb_flushall_shift: 6 |
| [ 0.146084] Freeing SMP alternatives memory: 20K (ffffffff81a1a000 - ffffffff81a1f000) |
| [ 0.154974] ftrace: allocating 21601 entries in 85 pages |
| [ 0.168306] Switched APIC routing to physical flat. |
| [ 0.173610] ..TIMER: vector=0x30 apic1=0 pin1=0 apic2=0 pin2=0 |
| [ 0.219157] smpboot: CPU0: Six-Core AMD Opteron(tm) Processor 2431 (fam: 10, model: 08, stepping: 00) |
| [ 0.336516] Performance Events: AMD PMU driver. |
| [ 0.341176] ... version: 0 |
| [ 0.345247] ... bit width: 48 |
| [ 0.349403] ... generic registers: 4 |
| [ 0.353471] ... value mask: 0000ffffffffffff |
| [ 0.358843] ... max period: 00007fffffffffff |
| [ 0.364219] ... fixed-purpose events: 0 |
| [ 0.368293] ... event mask: 000000000000000f |
| [ 0.375740] NMI watchdog: enabled on all CPUs, permanently consumes one hw-PMU counter. |
| [ 0.384004] x86: Booting SMP configuration: |
| [ 0.388248] .... node #0, CPUs: #1 |
| [ 0.405994] do_IRQ: 1.55 No irq handler for vector (irq -1) |
| [ 0.419154] #2 |
| [ 0.419154] do_IRQ: 2.55 No irq handler for vector (irq -1) |
| [ 0.432304] #3 |
| [ 0.432304] do_IRQ: 3.55 No irq handler for vector (irq -1) |
| [ 0.445452] #4 |
| [ 0.445453] do_IRQ: 4.55 No irq handler for vector (irq -1) |
| [ 0.458599] #5 |
| [ 0.458599] do_IRQ: 5.55 No irq handler for vector (irq -1) |
| [ 0.568306] #6 |
| [ 0.568307] do_IRQ: 6.55 No irq handler for vector (irq -1) |
| [ 0.581452] #7 |
| [ 0.581452] do_IRQ: 7.55 No irq handler for vector (irq -1) |
| [ 0.594604] #8 |
| [ 0.594604] do_IRQ: 8.55 No irq handler for vector (irq -1) |
| [ 0.607762] #9 |
| [ 0.607763] do_IRQ: 9.55 No irq handler for vector (irq -1) |
| [ 0.620913] #10 |
| [ 0.620913] do_IRQ: 10.55 No irq handler for vector (irq -1) |
| [ 0.634056] #11 |
| [ 0.634057] x86: Booted up 1 node, 12 CPUs |
| [ 0.640147] smpboot: Total of 12 processors activated (57898.53 BogoMIPS) |
| [ 0.661264] devtmpfs: initialized |
| [ 0.671440] pinctrl core: initialized pinctrl subsystem |
| [ 0.676859] NET: Registered protocol family 16 |
| [ 0.681523] cpuidle: using governor ladder |
| [ 0.685683] cpuidle: using governor menu |
| [ 0.689677] node 0 link 1: io port [1000, 3fff] |
| [ 0.689680] TOM: 00000000e0000000 aka 3584M |
| [ 0.693929] Fam 10h mmconf [mem 0xe0000000-0xefffffff] |
| [ 0.693932] node 0 link 1: mmio [fc000000, fc3fffff] |
| [ 0.693935] node 0 link 1: mmio [f8000000, fbffffff] |
| [ 0.693936] TOM2: 00000001a0000000 aka 6656M |
| [ 0.698267] bus: [bus 00-05] on node 0 link 1 |
| [ 0.698269] bus: 00 [io 0x0000-0xffff] |
| [ 0.698270] bus: 00 [mem 0xf0000000-0xffffffff] |
| [ 0.698271] bus: 00 [mem 0x1a0000000-0xfcffffffff] |
| [ 0.698360] ACPI: bus type PCI registered |
| [ 0.702426] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5 |
| [ 0.709060] PCI: Using configuration type 1 for base access |
| [ 0.714693] PCI: Using configuration type 1 for extended access |
| [ 0.721229] mtrr: your CPUs had inconsistent variable MTRR settings |
| [ 0.727568] mtrr: probably your BIOS does not setup all CPUs. |
| [ 0.733374] mtrr: corrected configuration. |
| [ 0.748948] ACPI: Added _OSI(Module Device) |
| [ 0.753218] ACPI: Added _OSI(Processor Device) |
| [ 0.757729] ACPI: Added _OSI(3.0 _SCP Extensions) |
| [ 0.762502] ACPI: Added _OSI(Processor Aggregator Device) |
| [ 0.770654] ACPI: Interpreter enabled |
| [ 0.774386] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S2_] (20140424/hwxface-580) |
| [ 0.783799] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S3_] (20140424/hwxface-580) |
| [ 0.793227] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S4_] (20140424/hwxface-580) |
| [ 0.802652] ACPI: (supports S0 S1 S5) |
| [ 0.806381] ACPI: Using IOAPIC for interrupt routing |
| [ 0.811435] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug |
| [ 0.831723] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-05]) |
| [ 0.837980] acpi PNP0A03:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI] |
| [ 0.846284] acpi PNP0A03:00: _OSC: OS now controls [PCIeHotplug PME AER PCIeCapability] |
| [ 0.869299] acpi PNP0A03:00: host bridge window expanded to [io 0x0000-0x0cf7]; [io 0x03b0-0x03df] ignored |
| [ 0.879352] PCI host bridge to bus 0000:00 |
| [ 0.883516] pci_bus 0000:00: root bus resource [bus 00-05] |
| [ 0.889075] pci_bus 0000:00: root bus resource [io 0x0d00-0x3fff] |
| [ 0.895328] pci_bus 0000:00: root bus resource [mem 0xf8000000-0xfbffffff] |
| [ 0.902274] pci_bus 0000:00: root bus resource [mem 0xfc000000-0xfc3fffff] |
| [ 0.909208] pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7] |
| [ 0.915473] pci 0000:00:00.0: [10de:005e] type 00 class 0x058000 |
| [ 0.915613] pci 0000:00:01.0: [10de:0051] type 00 class 0x060100 |
| [ 0.915619] pci 0000:00:01.0: reg 0x10: [io 0x2c00-0x2c7f] |
| [ 0.915717] pci 0000:00:01.1: [10de:0052] type 00 class 0x0c0500 |
| [ 0.915726] pci 0000:00:01.1: reg 0x10: [io 0x3000-0x301f] |
| [ 0.915742] pci 0000:00:01.1: reg 0x20: [io 0x2c80-0x2cbf] |
| [ 0.915746] pci 0000:00:01.1: reg 0x24: [io 0x2cc0-0x2cff] |
| [ 0.915763] pci 0000:00:01.1: PME# supported from D3hot D3cold |
| [ 0.915841] pci 0000:00:02.0: [10de:005a] type 00 class 0x0c0310 |
| [ 0.915850] pci 0000:00:02.0: reg 0x10: [mem 0xfc300000-0xfc300fff] |
| [ 0.915881] pci 0000:00:02.0: supports D1 D2 |
| [ 0.915888] pci 0000:00:02.0: PME# supported from D0 D1 D2 D3hot D3cold |
| [ 0.915928] pci 0000:00:02.0: System wakeup disabled by ACPI |
| [ 0.921705] pci 0000:00:02.1: [10de:005b] type 00 class 0x0c0320 |
| [ 0.921714] pci 0000:00:02.1: reg 0x10: [mem 0xfc303000-0xfc3030ff] |
| [ 0.921749] pci 0000:00:02.1: supports D1 D2 |
| [ 0.921751] pci 0000:00:02.1: PME# supported from D0 D1 D2 D3hot D3cold |
| [ 0.921791] pci 0000:00:02.1: System wakeup disabled by ACPI |
| [ 0.927572] pci 0000:00:06.0: [10de:0053] type 00 class 0x01018a |
| [ 0.927595] pci 0000:00:06.0: reg 0x20: [io 0x3020-0x302f] |
| [ 0.927605] pci 0000:00:06.0: legacy IDE quirk: reg 0x10: [io 0x01f0-0x01f7] |
| [ 0.934814] pci 0000:00:06.0: legacy IDE quirk: reg 0x14: [io 0x03f6] |
| [ 0.941410] pci 0000:00:06.0: legacy IDE quirk: reg 0x18: [io 0x0170-0x0177] |
| [ 0.948614] pci 0000:00:06.0: legacy IDE quirk: reg 0x1c: [io 0x0376] |
| [ 0.955282] pci 0000:00:07.0: [10de:0054] type 00 class 0x010185 |
| [ 0.955291] pci 0000:00:07.0: reg 0x10: [io 0x3050-0x3057] |
| [ 0.955296] pci 0000:00:07.0: reg 0x14: [io 0x3070-0x3073] |
| [ 0.955300] pci 0000:00:07.0: reg 0x18: [io 0x3058-0x305f] |
| [ 0.955303] pci 0000:00:07.0: reg 0x1c: [io 0x3074-0x3077] |
| [ 0.955307] pci 0000:00:07.0: reg 0x20: [io 0x3030-0x303f] |
| [ 0.955313] pci 0000:00:07.0: reg 0x24: [mem 0xfc301000-0xfc301fff] |
| [ 0.955402] pci 0000:00:08.0: [10de:0055] type 00 class 0x010185 |
| [ 0.955408] pci 0000:00:08.0: reg 0x10: [io 0x3060-0x3067] |
| [ 0.955418] pci 0000:00:08.0: reg 0x14: [io 0x3078-0x307b] |
| [ 0.955422] pci 0000:00:08.0: reg 0x18: [io 0x3068-0x306f] |
| [ 0.955426] pci 0000:00:08.0: reg 0x1c: [io 0x307c-0x307f] |
| [ 0.955429] pci 0000:00:08.0: reg 0x20: [io 0x3040-0x304f] |
| [ 0.955434] pci 0000:00:08.0: reg 0x24: [mem 0xfc302000-0xfc302fff] |
| [ 0.955513] pci 0000:00:09.0: [10de:005c] type 01 class 0x060400 |
| [ 0.955574] pci 0000:00:09.0: System wakeup disabled by ACPI |
| [ 0.961348] pci 0000:00:0b.0: [10de:005d] type 01 class 0x060400 |
| [ 0.961389] pci 0000:00:0b.0: PME# supported from D0 D1 D2 D3hot D3cold |
| [ 0.961429] pci 0000:00:0b.0: System wakeup disabled by ACPI |
| [ 0.967208] pci 0000:00:0c.0: [10de:005d] type 01 class 0x060400 |
| [ 0.967245] pci 0000:00:0c.0: PME# supported from D0 D1 D2 D3hot D3cold |
| [ 0.967288] pci 0000:00:0c.0: System wakeup disabled by ACPI |
| [ 0.973070] pci 0000:00:0d.0: [10de:005d] type 01 class 0x060400 |
| [ 0.973105] pci 0000:00:0d.0: PME# supported from D0 D1 D2 D3hot D3cold |
| [ 0.973145] pci 0000:00:0d.0: System wakeup disabled by ACPI |
| [ 0.978918] pci 0000:00:0e.0: [10de:005d] type 01 class 0x060400 |
| [ 0.978943] pci 0000:00:0e.0: PME# supported from D0 D1 D2 D3hot D3cold |
| [ 0.978984] pci 0000:00:0e.0: System wakeup disabled by ACPI |
| [ 0.984767] pci 0000:00:18.0: [1022:1200] type 00 class 0x060000 |
| [ 0.984853] pci 0000:00:18.1: [1022:1201] type 00 class 0x060000 |
| [ 0.984929] pci 0000:00:18.2: [1022:1202] type 00 class 0x060000 |
| [ 0.985008] pci 0000:00:18.3: [1022:1203] type 00 class 0x060000 |
| [ 0.985091] pci 0000:00:18.4: [1022:1204] type 00 class 0x060000 |
| [ 0.985168] pci 0000:00:19.0: [1022:1200] type 00 class 0x060000 |
| [ 0.985265] pci 0000:00:19.1: [1022:1201] type 00 class 0x060000 |
| [ 0.985343] pci 0000:00:19.2: [1022:1202] type 00 class 0x060000 |
| [ 0.985424] pci 0000:00:19.3: [1022:1203] type 00 class 0x060000 |
| [ 0.985511] pci 0000:00:19.4: [1022:1204] type 00 class 0x060000 |
| [ 0.985629] pci 0000:01:04.0: [18ca:0020] type 00 class 0x030000 |
| [ 0.985642] pci 0000:01:04.0: reg 0x10: [mem 0xf8000000-0xfbffffff pref] |
| [ 0.985651] pci 0000:01:04.0: reg 0x14: [mem 0xfc000000-0xfc03ffff] |
| [ 0.985659] pci 0000:01:04.0: reg 0x18: [io 0x1000-0x107f] |
| [ 0.985692] pci 0000:01:04.0: supports D1 D2 |
| [ 0.985762] pci 0000:00:09.0: PCI bridge to [bus 01] |
| [ 0.990803] pci 0000:00:09.0: bridge window [io 0x1000-0x1fff] |
| [ 0.990805] pci 0000:00:09.0: bridge window [mem 0xfc000000-0xfc0fffff] |
| [ 0.990808] pci 0000:00:09.0: bridge window [mem 0xf8000000-0xfbffffff pref] |
| [ 0.990867] pci 0000:02:00.0: [14e4:1659] type 00 class 0x020000 |
| [ 0.990899] pci 0000:02:00.0: reg 0x10: [mem 0xfc100000-0xfc10ffff 64bit] |
| [ 0.990928] pci 0000:02:00.0: reg 0x30: [mem 0x61c00000-0x61c0ffff pref] |
| [ 0.990993] pci 0000:02:00.0: PME# supported from D3hot D3cold |
| [ 0.991059] pci 0000:02:00.0: disabling ASPM on pre-1.1 PCIe device. You can enable it with 'pcie_aspm=force' |
| [ 1.001161] pci 0000:00:0b.0: PCI bridge to [bus 02] |
| [ 1.006194] pci 0000:00:0b.0: bridge window [mem 0xfc100000-0xfc1fffff] |
| [ 1.006263] pci 0000:03:00.0: [14e4:1659] type 00 class 0x020000 |
| [ 1.006278] pci 0000:03:00.0: reg 0x10: [mem 0xfc200000-0xfc20ffff 64bit] |
| [ 1.006381] pci 0000:03:00.0: PME# supported from D3hot D3cold |
| [ 1.006439] pci 0000:03:00.0: disabling ASPM on pre-1.1 PCIe device. You can enable it with 'pcie_aspm=force' |
| [ 1.016526] pci 0000:00:0c.0: PCI bridge to [bus 03] |
| [ 1.021559] pci 0000:00:0c.0: bridge window [mem 0xfc200000-0xfc2fffff] |
| [ 1.021607] pci 0000:00:0d.0: PCI bridge to [bus 04] |
| [ 1.026687] pci 0000:00:0e.0: PCI bridge to [bus 05] |
| [ 1.031732] pci_bus 0000:00: on NUMA node 0 |
| [ 1.031801] ACPI: PCI Interrupt Link [LNKA] (IRQs *16 17 18 19) |
| [ 1.038208] ACPI: PCI Interrupt Link [LNKB] (IRQs 16 *17 18 19) |
| [ 1.044582] ACPI: PCI Interrupt Link [LNKC] (IRQs 16 17 18 19) *0, disabled. |
| [ 1.052197] ACPI: PCI Interrupt Link [LNKD] (IRQs 16 17 18 19) *0, disabled. |
| [ 1.059815] ACPI: PCI Interrupt Link [LNKE] (IRQs 16 17 18 19) *0, disabled. |
| [ 1.067431] ACPI: PCI Interrupt Link [LLAS] (IRQs 20 21 22 23) *0, disabled. |
| [ 1.075049] ACPI: PCI Interrupt Link [LUOH] (IRQs 20 21 22 *23) |
| [ 1.081419] ACPI: PCI Interrupt Link [LUEH] (IRQs 20 21 *22 23) |
| [ 1.087804] ACPI: PCI Interrupt Link [LAUD] (IRQs 20 21 22 23) *0, disabled. |
| [ 1.095430] ACPI: PCI Interrupt Link [LMOD] (IRQs 20 21 22 23) *0, disabled. |
| [ 1.103040] ACPI: PCI Interrupt Link [LPA0] (IRQs 20 21 22 23) *0, disabled. |
| [ 1.110663] ACPI: PCI Interrupt Link [LSA0] (IRQs 20 *21 22 23) |
| [ 1.117033] ACPI: PCI Interrupt Link [LSA1] (IRQs *20 21 22 23) |
| [ 1.123422] ACPI: PCI Interrupt Link [LEMA] (IRQs 20 21 22 23) *0, disabled. |
| [ 1.131051] ACPI: PCI Interrupt Link [LUB0] (IRQs 20 21 22 23) *0, disabled. |
| [ 1.138676] ACPI: PCI Interrupt Link [LUB2] (IRQs 20 21 22 23) *0, disabled. |
| [ 1.146278] ACPI: PCI Interrupt Link [LKSM] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled. |
| [ 1.155379] ACPI: PCI Interrupt Link [LNIA] (IRQs 16) *0, disabled. |
| [ 1.162057] ACPI: PCI Interrupt Link [LNIB] (IRQs 17) *0, disabled. |
| [ 1.168717] ACPI: PCI Interrupt Link [LNIC] (IRQs 18) *0, disabled. |
| [ 1.175383] ACPI: PCI Interrupt Link [LNND] (IRQs 19) *0, disabled. |
| [ 1.182252] ACPI: Enabled 1 GPEs in block 00 to 1F |
| [ 1.187405] vgaarb: setting as boot device: PCI:0000:01:04.0 |
| [ 1.193159] vgaarb: device added: PCI:0000:01:04.0,decodes=io+mem,owns=io+mem,locks=none |
| [ 1.201347] vgaarb: loaded |
| [ 1.204128] vgaarb: bridge control possible 0000:01:04.0 |
| [ 1.209626] PCI: Using ACPI for IRQ routing |
| [ 1.213883] PCI: pci_cache_line_size set to 64 bytes |
| [ 1.213929] e820: reserve RAM buffer [mem 0x0009fc00-0x0009ffff] |
| [ 1.213931] e820: reserve RAM buffer [mem 0xdffaf000-0xdfffffff] |
| [ 1.214149] HPET: 3 timers in total, 0 timers will be used for per-cpu timer |
| [ 1.221275] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 31 |
| [ 1.226532] hpet0: 3 comparators, 32-bit 25.000000 MHz counter |
| [ 1.235518] Switched to clocksource hpet |
| [ 1.247416] pnp: PnP ACPI init |
| [ 1.250581] ACPI: bus type PNP registered |
| [ 1.255034] pnp 00:00: Plug and Play ACPI device, IDs PNP0303 PNP030b (active) |
| [ 1.255085] pnp 00:01: Plug and Play ACPI device, IDs PNP0f03 PNP0f13 (active) |
| [ 1.255142] pnp 00:02: Plug and Play ACPI device, IDs PNP0501 (active) |
| [ 1.255194] pnp 00:03: Plug and Play ACPI device, IDs PNP0501 (active) |
| [ 1.255222] pnp 00:04: [dma 2] |
| [ 1.255247] pnp 00:04: Plug and Play ACPI device, IDs PNP0700 (active) |
| [ 1.255263] pnp: PnP ACPI: found 5 devices |
| [ 1.259434] ACPI: bus type PNP unregistered |
| [ 1.270738] pci 0000:02:00.0: can't claim BAR 6 [mem 0x61c00000-0x61c0ffff pref]: no compatible bridge window |
| [ 1.280781] pci 0000:00:09.0: PCI bridge to [bus 01] |
| [ 1.285822] pci 0000:00:09.0: bridge window [io 0x1000-0x1fff] |
| [ 1.291984] pci 0000:00:09.0: bridge window [mem 0xfc000000-0xfc0fffff] |
| [ 1.298841] pci 0000:00:09.0: bridge window [mem 0xf8000000-0xfbffffff pref] |
| [ 1.306156] pci 0000:02:00.0: BAR 6: assigned [mem 0xfc110000-0xfc11ffff pref] |
| [ 1.313470] pci 0000:00:0b.0: PCI bridge to [bus 02] |
| [ 1.318503] pci 0000:00:0b.0: bridge window [mem 0xfc100000-0xfc1fffff] |
| [ 1.325358] pci 0000:00:0c.0: PCI bridge to [bus 03] |
| [ 1.330390] pci 0000:00:0c.0: bridge window [mem 0xfc200000-0xfc2fffff] |
| [ 1.337242] pci 0000:00:0d.0: PCI bridge to [bus 04] |
| [ 1.342277] pci 0000:00:0e.0: PCI bridge to [bus 05] |
| [ 1.347318] pci_bus 0000:00: resource 4 [io 0x0d00-0x3fff] |
| [ 1.347320] pci_bus 0000:00: resource 5 [mem 0xf8000000-0xfbffffff] |
| [ 1.347322] pci_bus 0000:00: resource 6 [mem 0xfc000000-0xfc3fffff] |
| [ 1.347324] pci_bus 0000:00: resource 7 [io 0x0000-0x0cf7] |
| [ 1.347326] pci_bus 0000:01: resource 0 [io 0x1000-0x1fff] |
| [ 1.347328] pci_bus 0000:01: resource 1 [mem 0xfc000000-0xfc0fffff] |
| [ 1.347330] pci_bus 0000:01: resource 2 [mem 0xf8000000-0xfbffffff pref] |
| [ 1.347333] pci_bus 0000:02: resource 1 [mem 0xfc100000-0xfc1fffff] |
| [ 1.347335] pci_bus 0000:03: resource 1 [mem 0xfc200000-0xfc2fffff] |
| [ 1.347491] NET: Registered protocol family 2 |
| [ 1.352407] TCP established hash table entries: 65536 (order: 7, 524288 bytes) |
| [ 1.360075] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes) |
| [ 1.367455] TCP: Hash tables configured (established 65536 bind 65536) |
| [ 1.374139] TCP: reno registered |
| [ 1.377444] UDP hash table entries: 4096 (order: 5, 131072 bytes) |
| [ 1.383712] UDP-Lite hash table entries: 4096 (order: 5, 131072 bytes) |
| [ 1.390540] NET: Registered protocol family 1 |
| [ 1.395229] ACPI: PCI Interrupt Link [LUB0] enabled at IRQ 23 |
| [ 1.401291] ACPI: PCI Interrupt Link [LUB2] enabled at IRQ 22 |
| [ 1.407226] pci 0000:00:00.0: Found enabled HT MSI Mapping |
| [ 1.412816] pci 0000:00:00.0: Found enabled HT MSI Mapping |
| [ 1.418375] pci 0000:00:0b.0: Found disabled HT MSI Mapping |
| [ 1.424021] pci 0000:00:00.0: Found enabled HT MSI Mapping |
| [ 1.430731] pci 0000:00:00.0: Found enabled HT MSI Mapping |
| [ 1.436293] pci 0000:00:0c.0: Found disabled HT MSI Mapping |
| [ 1.441939] pci 0000:00:00.0: Found enabled HT MSI Mapping |
| [ 1.447537] pci 0000:00:00.0: Found enabled HT MSI Mapping |
| [ 1.453096] pci 0000:00:0d.0: Found disabled HT MSI Mapping |
| [ 1.458740] pci 0000:00:00.0: Found enabled HT MSI Mapping |
| [ 1.464344] pci 0000:00:00.0: Found enabled HT MSI Mapping |
| [ 1.469897] pci 0000:00:0e.0: Found disabled HT MSI Mapping |
| [ 1.475546] pci 0000:00:00.0: Found enabled HT MSI Mapping |
| [ 1.481120] pci 0000:01:04.0: Video device with shadowed ROM |
| [ 1.481126] PCI: CLS 64 bytes, default 64 |
| [ 1.481206] Unpacking initramfs... |
| [ 1.671835] Freeing initrd memory: 8744K (ffff88007f775000 - ffff88007ffff000) |
| [ 1.679514] PCI-DMA: Disabling AGP. |
| [ 1.683253] PCI-DMA: aperture base @ d4000000 size 65536 KB |
| [ 1.688918] PCI-DMA: using GART IOMMU. |
| [ 1.692739] PCI-DMA: Reserving 64MB of IOMMU area in the AGP aperture |
| [ 1.705547] platform rtc_cmos: registered platform RTC device (no PNP device found) |
| [ 1.713898] microcode: CPU0: patch_level=0x00000000 |
| [ 1.718870] microcode: CPU1: patch_level=0x00000000 |
| [ 1.723834] microcode: CPU2: patch_level=0x00000000 |
| [ 1.728805] microcode: CPU3: patch_level=0x00000000 |
| [ 1.733774] microcode: CPU4: patch_level=0x00000000 |
| [ 1.738742] microcode: CPU5: patch_level=0x00000000 |
| [ 1.743710] microcode: CPU6: patch_level=0x00000000 |
| [ 1.748690] microcode: CPU7: patch_level=0x00000000 |
| [ 1.753668] microcode: CPU8: patch_level=0x00000000 |
| [ 1.758639] microcode: CPU9: patch_level=0x00000000 |
| [ 1.763618] microcode: CPU10: patch_level=0x00000000 |
| [ 1.768683] microcode: CPU11: patch_level=0x00000000 |
| [ 1.773805] microcode: Microcode Update Driver: v2.00 <tigran@aivazian.fsnet.co.uk>, Peter Oruba |
| [ 1.782712] LVT offset 1 assigned for vector 0x400 |
| [ 1.787585] IBS: LVT offset 1 assigned |
| [ 1.791431] perf: AMD IBS detected (0x0000001f) |
| [ 1.796544] futex hash table entries: 4096 (order: 6, 262144 bytes) |
| [ 1.803003] audit: initializing netlink subsys (disabled) |
| [ 1.808506] audit: type=2000 audit(1426541291.612:1): initialized |
| [ 1.815074] HugeTLB registered 2 MB page size, pre-allocated 0 pages |
| [ 1.821533] zbud: loaded |
| [ 1.824468] VFS: Disk quotas dquot_6.5.2 |
| [ 1.828497] Dquot-cache hash table entries: 512 (order 0, 4096 bytes) |
| [ 1.835085] msgmni has been set to 11961 |
| [ 1.839551] alg: No test for stdrng (krng) |
| [ 1.843783] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252) |
| [ 1.851380] io scheduler noop registered |
| [ 1.855383] io scheduler deadline registered |
| [ 1.859791] io scheduler cfq registered (default) |
| [ 1.864714] pcieport 0000:00:0b.0: irq 40 for MSI/MSI-X |
| [ 1.864813] pcieport 0000:00:0c.0: irq 41 for MSI/MSI-X |
| [ 1.864906] pcieport 0000:00:0d.0: irq 42 for MSI/MSI-X |
| [ 1.865001] pcieport 0000:00:0e.0: irq 43 for MSI/MSI-X |
| [ 1.865123] aer 0000:00:0b.0:pcie02: service driver aer loaded |
| [ 1.865145] aer 0000:00:0c.0:pcie02: service driver aer loaded |
| [ 1.865167] aer 0000:00:0d.0:pcie02: service driver aer loaded |
| [ 1.865189] aer 0000:00:0e.0:pcie02: service driver aer loaded |
| [ 1.865205] pcieport 0000:00:0b.0: Signaling PME through PCIe PME interrupt |
| [ 1.872244] pci 0000:02:00.0: Signaling PME through PCIe PME interrupt |
| [ 1.878841] pcie_pme 0000:00:0b.0:pcie01: service driver pcie_pme loaded |
| [ 1.878849] pcieport 0000:00:0c.0: Signaling PME through PCIe PME interrupt |
| [ 1.885880] pci 0000:03:00.0: Signaling PME through PCIe PME interrupt |
| [ 1.892475] pcie_pme 0000:00:0c.0:pcie01: service driver pcie_pme loaded |
| [ 1.892483] pcieport 0000:00:0d.0: Signaling PME through PCIe PME interrupt |
| [ 1.899513] pcie_pme 0000:00:0d.0:pcie01: service driver pcie_pme loaded |
| [ 1.899521] pcieport 0000:00:0e.0: Signaling PME through PCIe PME interrupt |
| [ 1.906562] pcie_pme 0000:00:0e.0:pcie01: service driver pcie_pme loaded |
| [ 1.906582] pci_hotplug: PCI Hot Plug PCI Core version: 0.5 |
| [ 1.912237] pciehp: PCI Express Hot Plug Controller Driver version: 0.4 |
| [ 1.919018] GHES: HEST is not enabled! |
| [ 1.922919] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled |
| [ 1.949549] 00:02: ttyS0 at I/O 0x3f8 (irq = 4, base_baud = 115200) is a 16550A |
| [ 1.977321] 00:03: ttyS1 at I/O 0x2f8 (irq = 3, base_baud = 115200) is a 16550A |
| [ 1.985129] Linux agpgart interface v0.103 |
| [ 1.989463] i8042: PNP: PS/2 Controller [PNP0303:KBD,PNP0f03:MOU] at 0x60,0x64 irq 1,12 |
| [ 1.999846] serio: i8042 KBD port at 0x60,0x64 irq 1 |
| [ 2.004909] serio: i8042 AUX port at 0x60,0x64 irq 12 |
| [ 2.010177] mousedev: PS/2 mouse device common for all mice |
| [ 2.015925] rtc_cmos rtc_cmos: RTC can wake from S4 |
| [ 2.021051] rtc_cmos rtc_cmos: rtc core: registered rtc_cmos as rtc0 |
| [ 2.027511] rtc_cmos rtc_cmos: alarms up to one year, y3k, 114 bytes nvram, hpet irqs |
| [ 2.035465] ledtrig-cpu: registered to indicate activity on CPUs |
| [ 2.041638] AMD IOMMUv2 driver by Joerg Roedel <joerg.roedel@amd.com> |
| [ 2.048151] AMD IOMMUv2 functionality not available on this system |
| [ 2.054508] TCP: cubic registered |
| [ 2.058028] NET: Registered protocol family 10 |
| [ 2.062902] mip6: Mobile IPv6 |
| [ 2.065937] NET: Registered protocol family 17 |
| [ 2.070451] mpls_gso: MPLS GSO support |
| [ 2.075021] registered taskstats version 1 |
| [ 2.079677] rtc_cmos rtc_cmos: setting system clock to 2015-03-16 21:28:13 UTC (1426541293) |
| [ 2.088231] PM: Hibernation image not present or could not be loaded. |
| [ 2.089493] Freeing unused kernel memory: 1204K (ffffffff818ed000 - ffffffff81a1a000) |
| [ 2.097429] Write protecting the kernel read-only data: 8192k |
| [ 2.105780] Freeing unused kernel memory: 928K (ffff880001518000 - ffff880001600000) |
| [ 2.114202] Freeing unused kernel memory: 216K (ffff8800017ca000 - ffff880001800000) |
| [ 2.130065] systemd-udevd[120]: starting version 215 |
| [ 2.135483] random: systemd-udevd urandom read with 3 bits of entropy available |
| [ 2.153998] pps_core: LinuxPPS API ver. 1 registered |
| [ 2.159055] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it> |
| [ 2.168472] ACPI: bus type USB registered |
| [ 2.172622] usbcore: registered new interface driver usbfs |
| [ 2.178209] usbcore: registered new interface driver hub |
| [ 2.178238] PTP clock support registered |
| [ 2.187670] usbcore: registered new device driver usb |
| [ 2.193058] tg3.c:v3.137 (May 11, 2014) |
| [ 2.197024] tg3 0000:02:00.0: enabling device (0004 -> 0006) |
| [ 2.202893] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver |
| [ 2.202937] ACPI: PCI Interrupt Link [LNIB] enabled at IRQ 17 |
| [ 2.215635] ehci-pci: EHCI PCI platform driver |
| [ 2.220272] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver |
| [ 2.220402] ehci-pci 0000:00:02.1: EHCI Host Controller |
| [ 2.220408] ehci-pci 0000:00:02.1: new USB bus registered, assigned bus number 1 |
| [ 2.220419] ehci-pci 0000:00:02.1: debug port 1 |
| [ 2.220453] ehci-pci 0000:00:02.1: cache line size of 64 is not supported |
| [ 2.220474] ehci-pci 0000:00:02.1: irq 22, io mem 0xfc303000 |
| [ 2.230399] ehci-pci 0000:00:02.1: USB 2.0 started, EHCI 1.00 |
| [ 2.230439] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002 |
| [ 2.230440] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 |
| [ 2.230441] usb usb1: Product: EHCI Host Controller |
| [ 2.230442] usb usb1: Manufacturer: Linux 3.16.0-4-amd64 ehci_hcd |
| [ 2.230443] usb usb1: SerialNumber: 0000:00:02.1 |
| [ 2.230676] hub 1-0:1.0: USB hub found |
| [ 2.230686] hub 1-0:1.0: 10 ports detected |
| [ 2.293646] ohci-pci: OHCI PCI platform driver |
| [ 2.298318] ohci-pci 0000:00:02.0: OHCI PCI host controller |
| [ 2.303969] ohci-pci 0000:00:02.0: new USB bus registered, assigned bus number 2 |
| [ 2.311486] ohci-pci 0000:00:02.0: irq 23, io mem 0xfc300000 |
| [ 2.332226] tg3 0000:02:00.0 eth0: Tigon3 [partno(BCM95721) rev 4201] (PCI Express) MAC address 00:1e:8c:51:61:a2 |
| [ 2.342596] tg3 0000:02:00.0 eth0: attached PHY is 5750 (10/100/1000Base-T Ethernet) (WireSpeed[1], EEE[0]) |
| [ 2.352434] tg3 0000:02:00.0 eth0: RXcsums[1] LinkChgREG[0] MIirq[0] ASF[0] TSOcap[1] |
| [ 2.360350] tg3 0000:02:00.0 eth0: dma_rwctrl[76180000] dma_mask[64-bit] |
| [ 2.367191] tg3 0000:03:00.0: enabling device (0004 -> 0006) |
| [ 2.372285] usb usb2: New USB device found, idVendor=1d6b, idProduct=0001 |
| [ 2.372287] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1 |
| [ 2.372288] usb usb2: Product: OHCI PCI host controller |
| [ 2.372289] usb usb2: Manufacturer: Linux 3.16.0-4-amd64 ohci_hcd |
| [ 2.372290] usb usb2: SerialNumber: 0000:00:02.0 |
| [ 2.372471] hub 2-0:1.0: USB hub found |
| [ 2.372480] hub 2-0:1.0: 10 ports detected |
| [ 2.411244] ACPI: PCI Interrupt Link [LNIA] enabled at IRQ 16 |
| [ 2.453440] tg3 0000:03:00.0 eth1: Tigon3 [partno(BCM95721) rev 4201] (PCI Express) MAC address 00:1e:8c:51:63:95 |
| [ 2.463815] tg3 0000:03:00.0 eth1: attached PHY is 5750 (10/100/1000Base-T Ethernet) (WireSpeed[1], EEE[0]) |
| [ 2.473645] tg3 0000:03:00.0 eth1: RXcsums[1] LinkChgREG[0] MIirq[0] ASF[0] TSOcap[1] |
| [ 2.481563] tg3 0000:03:00.0 eth1: dma_rwctrl[76180000] dma_mask[64-bit] |
| [ 2.492463] FS-Cache: Loaded |
| [ 2.498562] RPC: Registered named UNIX socket transport module. |
| [ 2.504798] RPC: Registered udp transport module. |
| [ 2.510879] RPC: Registered tcp transport module. |
| [ 2.516966] RPC: Registered tcp NFSv4.1 backchannel transport module. |
| [ 2.527830] FS-Cache: Netfs 'nfs' registered for caching |
| [ 2.538656] tg3 0000:02:00.0: irq 44 for MSI/MSI-X |
| [ 2.586052] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready |
| [ 2.701866] tsc: Refined TSC clocksource calibration: 2412.362 MHz |
| [ 3.704809] Switched to clocksource tsc |
| [ 4.189277] tg3 0000:02:00.0 eth0: Link is up at 100 Mbps, full duplex |
| [ 4.195886] tg3 0000:02:00.0 eth0: Flow control is on for TX and on for RX |
| [ 4.202850] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready |
| [ 5.433446] systemd[1]: systemd 215 running in system mode. (+PAM +AUDIT +SELINUX +IMA +SYSVINIT +LIBCRYPTSETUP +GCRYPT +ACL +XZ -SECCOMP -APPARMOR) |
| [ 5.447217] systemd[1]: Detected architecture 'x86-64'. |
| [ 5.658402] systemd[1]: Inserted module 'autofs4' |
| [ 5.664753] systemd[1]: Set hostname to <cb-test-tgt>. |
| [ 5.685124] random: nonblocking pool is initialized |
| [ 5.963555] systemd[1]: Cannot add dependency job for unit dbus.socket, ignoring: Unit dbus.socket failed to load: No such file or directory. |
| [ 5.976374] systemd[1]: Cannot add dependency job for unit display-manager.service, ignoring: Unit display-manager.service failed to load: No such file or directory. |
| [ 5.991587] systemd[1]: Expecting device dev-ttyS0.device... |
| [ 6.006174] systemd[1]: Starting Forward Password Requests to Wall Directory Watch. |
| [ 6.014033] systemd[1]: Started Forward Password Requests to Wall Directory Watch. |
| [ 6.021706] systemd[1]: Starting Remote File Systems (Pre). |
| [ 6.038120] systemd[1]: Reached target Remote File Systems (Pre). |
| [ 6.044327] systemd[1]: Starting Arbitrary Executable File Formats File System Automount Point. |
| [ 6.066089] systemd[1]: Set up automount Arbitrary Executable File Formats File System Automount Point. |
| [ 6.075602] systemd[1]: Starting Dispatch Password Requests to Console Directory Watch. |
| [ 6.083737] systemd[1]: Started Dispatch Password Requests to Console Directory Watch. |
| [ 6.091750] systemd[1]: Starting Paths. |
| [ 6.106039] systemd[1]: Reached target Paths. |
| [ 6.110500] systemd[1]: Starting Encrypted Volumes. |
| [ 6.126020] systemd[1]: Reached target Encrypted Volumes. |
| [ 6.131504] systemd[1]: Starting Swap. |
| [ 6.149985] systemd[1]: Reached target Swap. |
| [ 6.154340] systemd[1]: Starting Root Slice. |
| [ 6.173968] systemd[1]: Created slice Root Slice. |
| [ 6.178768] systemd[1]: Starting User and Session Slice. |
| [ 6.193940] systemd[1]: Created slice User and Session Slice. |
| [ 6.199769] systemd[1]: Starting Delayed Shutdown Socket. |
| [ 6.213916] systemd[1]: Listening on Delayed Shutdown Socket. |
| [ 6.219753] systemd[1]: Starting /dev/initctl Compatibility Named Pipe. |
| [ 6.237890] systemd[1]: Listening on /dev/initctl Compatibility Named Pipe. |
| [ 6.244957] systemd[1]: Starting Journal Socket (/dev/log). |
| [ 6.261869] systemd[1]: Listening on Journal Socket (/dev/log). |
| [ 6.267878] systemd[1]: Starting Syslog Socket. |
| [ 6.281840] systemd[1]: Listening on Syslog Socket. |
| [ 6.286829] systemd[1]: Starting udev Kernel Socket. |
| [ 6.301814] systemd[1]: Listening on udev Kernel Socket. |
| [ 6.307237] systemd[1]: Starting udev Control Socket. |
| [ 6.321793] systemd[1]: Listening on udev Control Socket. |
| [ 6.327285] systemd[1]: Starting Journal Socket. |
| [ 6.341769] systemd[1]: Listening on Journal Socket. |
| [ 6.346835] systemd[1]: Starting Sockets. |
| [ 6.361752] systemd[1]: Reached target Sockets. |
| [ 6.366391] systemd[1]: Starting System Slice. |
| [ 6.381722] systemd[1]: Created slice System Slice. |
| [ 6.386706] systemd[1]: Starting system-getty.slice. |
| [ 6.401707] systemd[1]: Created slice system-getty.slice. |
| [ 6.407209] systemd[1]: Starting system-serial\x2dgetty.slice. |
| [ 6.421686] systemd[1]: Created slice system-serial\x2dgetty.slice. |
| [ 6.428586] systemd[1]: Starting Create list of required static device nodes for the current kernel... |
| [ 6.454105] systemd[1]: Mounting Debug File System... |
| [ 6.481358] systemd[1]: Started Set Up Additional Binary Formats. |
| [ 6.487586] systemd[1]: Mounting Huge Pages File System... |
| [ 6.543185] systemd[1]: Starting Load Kernel Modules... |
| [ 6.558030] systemd[1]: Mounting POSIX Message Queue File System... |
| [ 6.573953] systemd[1]: Starting udev Coldplug all Devices... |
| [ 6.589966] systemd[1]: Starting Journal Service... |
| [ 6.613472] systemd[1]: Started Journal Service. |
| [ 7.364090] systemd-udevd[207]: starting version 215 |
| [ 7.393460] systemd-journald[188]: Received request to flush runtime journal from PID 1 |
| [ 8.094963] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input2 |
| [ 8.103414] ACPI: Power Button [PWRB] |
| [ 8.107234] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input3 |
| [ 8.107583] k10temp 0000:00:18.3: unreliable CPU thermal sensor; monitoring disabled |
| [ 8.107597] k10temp 0000:00:19.3: unreliable CPU thermal sensor; monitoring disabled |
| [ 8.130355] ACPI: Power Button [PWRF] |
| [ 8.135954] input: PC Speaker as /devices/platform/pcspkr/input/input4 |
| [ 8.151608] FDC 0 is a post-1991 82077 |
| [ 8.170052] EDAC MC: Ver: 3.0.0 |
| [ 8.173566] SCSI subsystem initialized |
| [ 8.177898] acpi-cpufreq: overriding BIOS provided _PSD data |
| [ 8.299622] w83793 0-002f: Registered watchdog chardev major 10, minor: 130 |
| [ 8.306711] i2c i2c-0: nForce2 SMBus adapter at 0x2c80 |
| [ 8.396031] MCE: In-kernel MCE decoding enabled. |
| [ 8.404412] libata version 3.00 loaded. |
| [ 8.422157] AMD64 EDAC driver v3.4.0 |
| [ 8.440417] kvm: Nested Virtualization enabled |
| [ 8.444971] kvm: Nested Paging enabled |
| [ 9.885775] *****RAPTOR ENGINEERING KFSN4-DRE AUTOMATED TEST BOOT SUCCESS***** |
| [ 11.543860] i2c i2c-1: nForce2 SMBus adapter at 0x2cc0 |
| [ 11.549263] EDAC amd64: DRAM ECC enabled. |
| [ 11.549281] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4 |
| [ 11.560188] EDAC amd64: F10h detected (node 0). |
| [ 11.564832] EDAC MC: DCT0 chip selects: |
| [ 11.564835] EDAC amd64: MC: 0: 1024MB 1: 1024MB |
| [ 11.569608] EDAC amd64: MC: 2: 1024MB 3: 1024MB |
| [ 11.574388] EDAC amd64: MC: 4: 1024MB 5: 1024MB |
| [ 11.579173] EDAC amd64: MC: 6: 0MB 7: 0MB |
| [ 11.583950] EDAC MC: DCT1 chip selects: |
| [ 11.583952] EDAC amd64: MC: 0: 0MB 1: 0MB |
| [ 11.588736] EDAC amd64: MC: 2: 0MB 3: 0MB |
| [ 11.593511] EDAC amd64: MC: 4: 0MB 5: 0MB |
| [ 11.598292] EDAC amd64: MC: 6: 0MB 7: 0MB |
| [ 11.603073] EDAC amd64: using x4 syndromes. |
| [ 11.607333] EDAC amd64: MCT channel count: 1 |
| [ 11.611741] EDAC amd64: CS0: Registered DDR2 RAM |
| [ 11.616458] EDAC amd64: CS1: Registered DDR2 RAM |
| [ 11.621151] EDAC amd64: CS2: Registered DDR2 RAM |
| [ 11.625854] EDAC amd64: CS3: Registered DDR2 RAM |
| [ 11.630559] EDAC amd64: CS4: Registered DDR2 RAM |
| [ 11.635251] EDAC amd64: CS5: Registered DDR2 RAM |
| [ 11.640450] EDAC MC0: Giving out device to module amd64_edac controller F10h: DEV 0000:00:18.2 (INTERRUPT) |
| [ 11.650250] EDAC amd64: DRAM ECC disabled. |
| [ 11.654443] EDAC amd64: ECC disabled in the BIOS or no ECC capability, module will not load. |
| Either enable ECC checking or force module loading by setting 'ecc_enable_override'. |
| (Note that use of the override may cause unknown side effects.) |
| [ 11.678985] sata_nv 0000:00:07.0: version 3.5 |
| [ 11.679001] EDAC PCI0: Giving out device to module amd64_edac controller EDAC PCI controller: DEV 0000:00:18.2 (POLLED) |
| [ 11.679342] ACPI: PCI Interrupt Link [LSA0] enabled at IRQ 21 |
| [ 11.680006] scsi0 : sata_nv |
| [ 11.698811] scsi1 : sata_nv |
| [ 11.701755] ata1: SATA max UDMA/133 cmd 0x3050 ctl 0x3070 bmdma 0x3030 irq 21 |
| [ 11.708978] ata2: SATA max UDMA/133 cmd 0x3058 ctl 0x3074 bmdma 0x3038 irq 21 |
| [ 11.716343] ACPI: PCI Interrupt Link [LSA1] enabled at IRQ 20 |
| [ 11.722523] scsi2 : sata_nv |
| [ 11.725544] scsi3 : sata_nv |
| [ 11.728481] ata3: SATA max UDMA/133 cmd 0x3060 ctl 0x3078 bmdma 0x3040 irq 20 |
| [ 11.735698] ata4: SATA max UDMA/133 cmd 0x3068 ctl 0x307c bmdma 0x3048 irq 20 |
| [ 11.742956] pata_amd 0000:00:06.0: version 0.4.1 |
| [ 11.743936] scsi4 : pata_amd |
| [ 11.747096] scsi5 : pata_amd |
| [ 11.750195] ata5: PATA max UDMA/133 cmd 0x1f0 ctl 0x3f6 bmdma 0x3020 irq 14 |
| [ 11.758480] ata6: PATA max UDMA/133 cmd 0x170 ctl 0x376 bmdma 0x3028 irq 15 |
| [ 12.027311] ata1: SATA link down (SStatus 0 SControl 300) |
| [ 12.051283] ata3: SATA link down (SStatus 0 SControl 300) |
| [ 12.342953] ata2: SATA link down (SStatus 0 SControl 300) |
| [ 12.658593] ata4: SATA link down (SStatus 0 SControl 300) |