| [ 0.000000] CPU0 microcode updated early to revision 0x18, date = 2014-05-23 |
| [ 0.000000] Initializing cgroup subsys cpuset |
| [ 0.000000] Initializing cgroup subsys cpu |
| [ 0.000000] Initializing cgroup subsys cpuacct |
| [ 0.000000] Linux version 3.17.0 (john@johnlewis.ie) (gcc version 4.8.2 20140120 (Red Hat 4.8.2-16) (GCC) ) #1 SMP Tue Oct 14 12:27:13 BST 2014 |
| [ 0.000000] Command line: BOOT_IMAGE=/boot/vmlinuz-3.17.0 root=UUID=a7ecfe05-3c38-40fe-b281-6e7c2b0123a8 ro vconsole.keymap=uk crashkernel=auto vconsole.font=latarcyrheb-sun16 rhgb quiet ipv6.disable=1 zswap.enabled=1 drm.debug=0 drm.vblankoffdelay=1 i915.semaphores=0 i915.modeset=1 i915.use_mmio_flip=1 i915.powersave=1 i915.enable_ips=1 i915.disable_power_well=1 i915.enable_hangcheck=1 i915.enable_cmd_parser=1 i915.fastboot=0 i915.enable_ppgtt=1 i915.reset=0 i915.lvds_use_ssc=0 i915.enable_psr=0 |
| [ 0.000000] e820: BIOS-provided physical RAM map: |
| [ 0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009fbff] usable |
| [ 0.000000] BIOS-e820: [mem 0x000000000009fc00-0x000000000009ffff] reserved |
| [ 0.000000] BIOS-e820: [mem 0x00000000000f0000-0x00000000000fffff] reserved |
| [ 0.000000] BIOS-e820: [mem 0x0000000000100000-0x000000007f6bcfff] usable |
| [ 0.000000] BIOS-e820: [mem 0x000000007f6bd000-0x00000000821fffff] reserved |
| [ 0.000000] BIOS-e820: [mem 0x00000000f0000000-0x00000000f3ffffff] reserved |
| [ 0.000000] BIOS-e820: [mem 0x00000000fed10000-0x00000000fed19fff] reserved |
| [ 0.000000] BIOS-e820: [mem 0x00000000fed84000-0x00000000fed84fff] reserved |
| [ 0.000000] BIOS-e820: [mem 0x0000000100000000-0x000000017cdfffff] usable |
| [ 0.000000] NX (Execute Disable) protection: active |
| [ 0.000000] SMBIOS 2.7 present. |
| [ 0.000000] DMI: Hewlett-Packard Falco/Falco, BIOS 4.0-6588-g4acd8ea-dirty 09/04/2014 |
| [ 0.000000] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved |
| [ 0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable |
| [ 0.000000] AGP: No AGP bridge found |
| [ 0.000000] e820: last_pfn = 0x17ce00 max_arch_pfn = 0x400000000 |
| [ 0.000000] MTRR default type: uncachable |
| [ 0.000000] MTRR fixed ranges enabled: |
| [ 0.000000] 00000-9FFFF write-back |
| [ 0.000000] A0000-BFFFF uncachable |
| [ 0.000000] C0000-FFFFF write-back |
| [ 0.000000] MTRR variable ranges enabled: |
| [ 0.000000] 0 base 0000000000 mask 7F80000000 write-back |
| [ 0.000000] 1 base 00D0000000 mask 7FF0000000 write-combining |
| [ 0.000000] 2 base 0100000000 mask 7F00000000 write-back |
| [ 0.000000] 3 disabled |
| [ 0.000000] 4 disabled |
| [ 0.000000] 5 disabled |
| [ 0.000000] 6 disabled |
| [ 0.000000] 7 disabled |
| [ 0.000000] 8 disabled |
| [ 0.000000] 9 disabled |
| [ 0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106 |
| [ 0.000000] e820: last_pfn = 0x7f6bd max_arch_pfn = 0x400000000 |
| [ 0.000000] Base memory trampoline at [ffff880000099000] 99000 size 24576 |
| [ 0.000000] Using GB pages for direct mapping |
| [ 0.000000] init_memory_mapping: [mem 0x00000000-0x000fffff] |
| [ 0.000000] [mem 0x00000000-0x000fffff] page 4k |
| [ 0.000000] BRK [0x01eeb000, 0x01eebfff] PGTABLE |
| [ 0.000000] BRK [0x01eec000, 0x01eecfff] PGTABLE |
| [ 0.000000] BRK [0x01eed000, 0x01eedfff] PGTABLE |
| [ 0.000000] init_memory_mapping: [mem 0x17cc00000-0x17cdfffff] |
| [ 0.000000] [mem 0x17cc00000-0x17cdfffff] page 2M |
| [ 0.000000] BRK [0x01eee000, 0x01eeefff] PGTABLE |
| [ 0.000000] init_memory_mapping: [mem 0x17c000000-0x17cbfffff] |
| [ 0.000000] [mem 0x17c000000-0x17cbfffff] page 2M |
| [ 0.000000] init_memory_mapping: [mem 0x100000000-0x17bffffff] |
| [ 0.000000] [mem 0x100000000-0x13fffffff] page 1G |
| [ 0.000000] [mem 0x140000000-0x17bffffff] page 2M |
| [ 0.000000] init_memory_mapping: [mem 0x00100000-0x7f6bcfff] |
| [ 0.000000] [mem 0x00100000-0x001fffff] page 4k |
| [ 0.000000] [mem 0x00200000-0x7f5fffff] page 2M |
| [ 0.000000] [mem 0x7f600000-0x7f6bcfff] page 4k |
| [ 0.000000] RAMDISK: [mem 0x33da0000-0x35ec7fff] |
| [ 0.000000] ACPI: Early table checksum verification disabled |
| [ 0.000000] ACPI: RSDP 0x00000000000F6DD0 000024 (v02 CORE ) |
| [ 0.000000] ACPI: XSDT 0x000000007F7D90E0 000054 (v01 CORE COREBOOT 00000000 CORE 00000000) |
| [ 0.000000] ACPI: FACP 0x000000007F7DD820 0000F4 (v03 CORE COREBOOT 00000000 CORE 00000001) |
| [ 0.000000] ACPI: DSDT 0x000000007F7D9250 0045CA (v02 COREv4 COREBOOT 20110725 INTL 20140114) |
| [ 0.000000] ACPI: FACS 0x000000007F7D9210 000040 |
| [ 0.000000] ACPI: HPET 0x000000007F7DD920 000038 (v01 CORE COREBOOT 00000000 CORE 00000000) |
| [ 0.000000] ACPI: APIC 0x000000007F7DD960 00005C (v01 CORE COREBOOT 00000000 CORE 00000000) |
| [ 0.000000] ACPI: MCFG 0x000000007F7DD9C0 00003C (v01 CORE COREBOOT 00000000 CORE 00000000) |
| [ 0.000000] ACPI: SSDT 0x000000007F7DEA00 0008A0 (v02 CORE COREBOOT 0000002A CORE 0000002A) |
| [ 0.000000] ACPI: SSDT 0x000000007F7DF2A0 00005C (v02 CORE COREBOOT 0000002A CORE 0000002A) |
| [ 0.000000] ACPI: Local APIC address 0xfee00000 |
| [ 0.000000] No NUMA configuration found |
| [ 0.000000] Faking a node at [mem 0x0000000000000000-0x000000017cdfffff] |
| [ 0.000000] Initmem setup node 0 [mem 0x00000000-0x17cdfffff] |
| [ 0.000000] NODE_DATA [mem 0x17cdd8000-0x17cdfdfff] |
| [ 0.000000] kexec: crashkernel: memory value expected |
| [ 0.000000] [ffffea0000000000-ffffea0005ffffff] PMD -> [ffff880178400000-ffff88017c3fffff] on node 0 |
| [ 0.000000] Zone ranges: |
| [ 0.000000] DMA [mem 0x00001000-0x00ffffff] |
| [ 0.000000] DMA32 [mem 0x01000000-0xffffffff] |
| [ 0.000000] Normal [mem 0x100000000-0x17cdfffff] |
| [ 0.000000] Movable zone start for each node |
| [ 0.000000] Early memory node ranges |
| [ 0.000000] node 0: [mem 0x00001000-0x0009efff] |
| [ 0.000000] node 0: [mem 0x00100000-0x7f6bcfff] |
| [ 0.000000] node 0: [mem 0x100000000-0x17cdfffff] |
| [ 0.000000] On node 0 totalpages: 1033307 |
| [ 0.000000] DMA zone: 64 pages used for memmap |
| [ 0.000000] DMA zone: 21 pages reserved |
| [ 0.000000] DMA zone: 3998 pages, LIFO batch:0 |
| [ 0.000000] DMA32 zone: 8091 pages used for memmap |
| [ 0.000000] DMA32 zone: 517821 pages, LIFO batch:31 |
| [ 0.000000] Normal zone: 7992 pages used for memmap |
| [ 0.000000] Normal zone: 511488 pages, LIFO batch:31 |
| [ 0.000000] Reserving Intel graphics stolen memory at 0x80200000-0x821fffff |
| [ 0.000000] ACPI: PM-Timer IO Port: 0x1008 |
| [ 0.000000] ACPI: Local APIC address 0xfee00000 |
| [ 0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled) |
| [ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x02] enabled) |
| [ 0.000000] ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0]) |
| [ 0.000000] IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-39 |
| [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) |
| [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level) |
| [ 0.000000] ACPI: IRQ0 used by override. |
| [ 0.000000] ACPI: IRQ9 used by override. |
| [ 0.000000] Using ACPI (MADT) for SMP configuration information |
| [ 0.000000] ACPI: HPET id: 0x8086a201 base: 0xfed00000 |
| [ 0.000000] smpboot: Allowing 2 CPUs, 0 hotplug CPUs |
| [ 0.000000] PM: Registered nosave memory: [mem 0x0009f000-0x0009ffff] |
| [ 0.000000] PM: Registered nosave memory: [mem 0x000a0000-0x000effff] |
| [ 0.000000] PM: Registered nosave memory: [mem 0x000f0000-0x000fffff] |
| [ 0.000000] PM: Registered nosave memory: [mem 0x7f6bd000-0x821fffff] |
| [ 0.000000] PM: Registered nosave memory: [mem 0x82200000-0xefffffff] |
| [ 0.000000] PM: Registered nosave memory: [mem 0xf0000000-0xf3ffffff] |
| [ 0.000000] PM: Registered nosave memory: [mem 0xf4000000-0xfed0ffff] |
| [ 0.000000] PM: Registered nosave memory: [mem 0xfed10000-0xfed19fff] |
| [ 0.000000] PM: Registered nosave memory: [mem 0xfed1a000-0xfed83fff] |
| [ 0.000000] PM: Registered nosave memory: [mem 0xfed84000-0xfed84fff] |
| [ 0.000000] PM: Registered nosave memory: [mem 0xfed85000-0xffffffff] |
| [ 0.000000] e820: [mem 0x82200000-0xefffffff] available for PCI devices |
| [ 0.000000] Booting paravirtualized kernel on bare hardware |
| [ 0.000000] setup_percpu: NR_CPUS:8192 nr_cpumask_bits:2 nr_cpu_ids:2 nr_node_ids:1 |
| [ 0.000000] PERCPU: Embedded 29 pages/cpu @ffff88017ca00000 s87232 r8192 d23360 u1048576 |
| [ 0.000000] pcpu-alloc: s87232 r8192 d23360 u1048576 alloc=1*2097152 |
| [ 0.000000] pcpu-alloc: [0] 0 1 |
| [ 0.000000] Built 1 zonelists in Node order, mobility grouping on. Total pages: 1017139 |
| [ 0.000000] Policy zone: Normal |
| [ 0.000000] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-3.17.0 root=UUID=a7ecfe05-3c38-40fe-b281-6e7c2b0123a8 ro vconsole.keymap=uk crashkernel=auto vconsole.font=latarcyrheb-sun16 rhgb quiet ipv6.disable=1 zswap.enabled=1 drm.debug=0 drm.vblankoffdelay=1 i915.semaphores=0 i915.modeset=1 i915.use_mmio_flip=1 i915.powersave=1 i915.enable_ips=1 i915.disable_power_well=1 i915.enable_hangcheck=1 i915.enable_cmd_parser=1 i915.fastboot=0 i915.enable_ppgtt=1 i915.reset=0 i915.lvds_use_ssc=0 i915.enable_psr=0 |
| [ 0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes) |
| [ 0.000000] xsave: enabled xstate_bv 0x3, cntxt size 0x240 using standard form |
| [ 0.000000] AGP: Checking aperture... |
| [ 0.000000] AGP: No AGP bridge found |
| [ 0.000000] Memory: 3951656K/4133228K available (6423K kernel code, 1410K rwdata, 3064K rodata, 1692K init, 2636K bss, 181572K reserved) |
| [ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=2, Nodes=1 |
| [ 0.000000] Hierarchical RCU implementation. |
| [ 0.000000] RCU restricting CPUs from NR_CPUS=8192 to nr_cpu_ids=2. |
| [ 0.000000] Offload RCU callbacks from all CPUs |
| [ 0.000000] Offload RCU callbacks from CPUs: 0-1. |
| [ 0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=2 |
| [ 0.000000] NR_IRQS:524544 nr_irqs:512 0 |
| [ 0.000000] Console: colour VGA+ 80x25 |
| [ 0.000000] console [tty0] enabled |
| [ 0.000000] allocated 16777216 bytes of page_cgroup |
| [ 0.000000] please try 'cgroup_disable=memory' option if you don't want memory cgroups |
| [ 0.000000] hpet clockevent registered |
| [ 0.000000] tsc: Fast TSC calibration using PIT |
| [ 0.000000] tsc: Detected 1396.748 MHz processor |
| [ 0.000047] Calibrating delay loop (skipped), value calculated using timer frequency.. 2793.49 BogoMIPS (lpj=1396748) |
| [ 0.000051] pid_max: default: 32768 minimum: 301 |
| [ 0.000061] ACPI: Core revision 20140724 |
| [ 0.004093] ACPI: All ACPI Tables successfully acquired |
| [ 0.005000] Security Framework initialized |
| [ 0.005009] SELinux: Initializing. |
| [ 0.005019] SELinux: Starting in permissive mode |
| [ 0.005500] Dentry cache hash table entries: 524288 (order: 10, 4194304 bytes) |
| [ 0.006793] Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes) |
| [ 0.007326] Mount-cache hash table entries: 8192 (order: 4, 65536 bytes) |
| [ 0.007335] Mountpoint-cache hash table entries: 8192 (order: 4, 65536 bytes) |
| [ 0.007615] Initializing cgroup subsys memory |
| [ 0.007622] Initializing cgroup subsys devices |
| [ 0.007625] Initializing cgroup subsys freezer |
| [ 0.007628] Initializing cgroup subsys net_cls |
| [ 0.007631] Initializing cgroup subsys blkio |
| [ 0.007634] Initializing cgroup subsys perf_event |
| [ 0.007637] Initializing cgroup subsys hugetlb |
| [ 0.007671] CPU: Physical Processor ID: 0 |
| [ 0.007673] CPU: Processor Core ID: 0 |
| [ 0.009029] mce: CPU supports 7 MCE banks |
| [ 0.009048] CPU0: Thermal monitoring enabled (TM1) |
| [ 0.009063] Last level iTLB entries: 4KB 1024, 2MB 1024, 4MB 1024 |
| Last level dTLB entries: 4KB 1024, 2MB 1024, 4MB 1024, 1GB 4 |
| [ 0.009209] Freeing SMP alternatives memory: 24K (ffffffff81c50000 - ffffffff81c56000) |
| [ 0.010685] ftrace: allocating 24621 entries in 97 pages |
| [ 0.027181] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1 |
| [ 0.037184] smpboot: CPU0: Intel(R) Celeron(R) 2955U @ 1.40GHz (fam: 06, model: 45, stepping: 01) |
| [ 0.037194] TSC deadline timer enabled |
| [ 0.037228] Performance Events: PEBS fmt2+, 16-deep LBR, Haswell events, full-width counters, Intel PMU driver. |
| [ 0.037259] ... version: 3 |
| [ 0.037261] ... bit width: 48 |
| [ 0.037262] ... generic registers: 8 |
| [ 0.037263] ... value mask: 0000ffffffffffff |
| [ 0.037265] ... max period: 0000ffffffffffff |
| [ 0.037266] ... fixed-purpose events: 3 |
| [ 0.037267] ... event mask: 00000007000000ff |
| [ 0.039256] x86: Booting SMP configuration: |
| [ 0.039259] .... node #0, CPUs: #1 |
| [ 0.051452] CPU1 microcode updated early to revision 0x18, date = 2014-05-23 |
| [ 0.055011] x86: Booted up 1 node, 2 CPUs |
| [ 0.055015] smpboot: Total of 2 processors activated (5586.99 BogoMIPS) |
| [ 0.055051] NMI watchdog: enabled on all CPUs, permanently consumes one hw-PMU counter. |
| [ 0.057145] devtmpfs: initialized |
| [ 0.060283] evm: security.selinux |
| [ 0.060286] evm: security.ima |
| [ 0.060287] evm: security.capability |
| [ 0.061607] atomic64_test: passed for x86-64 platform with CX8 and with SSE |
| [ 0.061750] NET: Registered protocol family 16 |
| [ 0.062028] cpuidle: using governor menu |
| [ 0.062199] ACPI: bus type PCI registered |
| [ 0.062202] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5 |
| [ 0.062301] PCI: MMCONFIG for domain 0000 [bus 00-3f] at [mem 0xf0000000-0xf3ffffff] (base 0xf0000000) |
| [ 0.062304] PCI: MMCONFIG at [mem 0xf0000000-0xf3ffffff] reserved in E820 |
| [ 0.062428] PCI: Using configuration type 1 for base access |
| [ 0.065384] ACPI: Added _OSI(Module Device) |
| [ 0.065387] ACPI: Added _OSI(Processor Device) |
| [ 0.065389] ACPI: Added _OSI(3.0 _SCP Extensions) |
| [ 0.065391] ACPI: Added _OSI(Processor Aggregator Device) |
| [ 0.071893] ACPI: Interpreter enabled |
| [ 0.071902] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S1_] (20140724/hwxface-580) |
| [ 0.071908] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S2_] (20140724/hwxface-580) |
| [ 0.071924] ACPI: (supports S0 S3 S4 S5) |
| [ 0.071926] ACPI: Using IOAPIC for interrupt routing |
| [ 0.071956] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug |
| [ 0.077989] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff]) |
| [ 0.077997] acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI] |
| [ 0.078044] acpi PNP0A08:00: _OSC: OS now controls [PCIeHotplug PME AER PCIeCapability] |
| [ 0.078159] acpi PNP0A08:00: ignoring host bridge window [mem 0x000cc000-0x000cffff] (conflicts with Video ROM [mem 0x000c0000-0x000cebff]) |
| [ 0.078165] acpi PNP0A08:00: [Firmware Info]: MMCONFIG for domain 0000 [bus 00-3f] only partially covers this bridge |
| [ 0.078370] PCI host bridge to bus 0000:00 |
| [ 0.078373] pci_bus 0000:00: root bus resource [bus 00-ff] |
| [ 0.078376] pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7] |
| [ 0.078378] pci_bus 0000:00: root bus resource [io 0x0d00-0xffff] |
| [ 0.078381] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff] |
| [ 0.078384] pci_bus 0000:00: root bus resource [mem 0x000c0000-0x000c3fff] |
| [ 0.078386] pci_bus 0000:00: root bus resource [mem 0x000c4000-0x000c7fff] |
| [ 0.078388] pci_bus 0000:00: root bus resource [mem 0x000c8000-0x000cbfff] |
| [ 0.078390] pci_bus 0000:00: root bus resource [mem 0x000d0000-0x000d3fff] |
| [ 0.078392] pci_bus 0000:00: root bus resource [mem 0x000d4000-0x000d7fff] |
| [ 0.078395] pci_bus 0000:00: root bus resource [mem 0x000d8000-0x000dbfff] |
| [ 0.078397] pci_bus 0000:00: root bus resource [mem 0x000dc000-0x000dffff] |
| [ 0.078399] pci_bus 0000:00: root bus resource [mem 0x000e0000-0x000e3fff] |
| [ 0.078401] pci_bus 0000:00: root bus resource [mem 0x000e4000-0x000e7fff] |
| [ 0.078403] pci_bus 0000:00: root bus resource [mem 0x000e8000-0x000ebfff] |
| [ 0.078405] pci_bus 0000:00: root bus resource [mem 0x000ec000-0x000effff] |
| [ 0.078407] pci_bus 0000:00: root bus resource [mem 0x000f0000-0x000fffff] |
| [ 0.078409] pci_bus 0000:00: root bus resource [mem 0x82200001-0xfebfffff] |
| [ 0.078411] pci_bus 0000:00: root bus resource [mem 0xfed40000-0xfed44fff] |
| [ 0.078422] pci 0000:00:00.0: [8086:0a04] type 00 class 0x060000 |
| [ 0.078549] pci 0000:00:02.0: [8086:0a06] type 00 class 0x030000 |
| [ 0.078567] pci 0000:00:02.0: reg 0x10: [mem 0xe0000000-0xe03fffff 64bit] |
| [ 0.078577] pci 0000:00:02.0: reg 0x18: [mem 0xd0000000-0xdfffffff 64bit pref] |
| [ 0.078584] pci 0000:00:02.0: reg 0x20: [io 0x1800-0x183f] |
| [ 0.078701] pci 0000:00:03.0: [8086:0a0c] type 00 class 0x040300 |
| [ 0.078713] pci 0000:00:03.0: reg 0x10: [mem 0xe0510000-0xe0513fff 64bit] |
| [ 0.078854] pci 0000:00:14.0: [8086:9c31] type 00 class 0x0c0330 |
| [ 0.078876] pci 0000:00:14.0: reg 0x10: [mem 0xe0500000-0xe050ffff 64bit] |
| [ 0.078945] pci 0000:00:14.0: PME# supported from D3hot D3cold |
| [ 0.079001] pci 0000:00:14.0: System wakeup disabled by ACPI |
| [ 0.079052] pci 0000:00:15.0: [8086:9c60] type 00 class 0x080102 |
| [ 0.079072] pci 0000:00:15.0: reg 0x10: [mem 0xe0518000-0xe0518fff] |
| [ 0.079084] pci 0000:00:15.0: reg 0x14: [mem 0xe0519000-0xe0519fff] |
| [ 0.079239] pci 0000:00:15.1: [8086:9c61] type 00 class 0x0c8000 |
| [ 0.079259] pci 0000:00:15.1: reg 0x10: [mem 0xe051a000-0xe051afff] |
| [ 0.079271] pci 0000:00:15.1: reg 0x14: [mem 0xe051b000-0xe051bfff] |
| [ 0.079426] pci 0000:00:15.2: [8086:9c62] type 00 class 0x0c8000 |
| [ 0.079446] pci 0000:00:15.2: reg 0x10: [mem 0xe051c000-0xe051cfff] |
| [ 0.079457] pci 0000:00:15.2: reg 0x14: [mem 0xe051d000-0xe051dfff] |
| [ 0.079622] pci 0000:00:1b.0: [8086:9c20] type 00 class 0x040300 |
| [ 0.079640] pci 0000:00:1b.0: reg 0x10: [mem 0xe0514000-0xe0517fff 64bit] |
| [ 0.079718] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold |
| [ 0.079769] pci 0000:00:1b.0: System wakeup disabled by ACPI |
| [ 0.079815] pci 0000:00:1c.0: [8086:9c10] type 01 class 0x060400 |
| [ 0.079891] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold |
| [ 0.080001] pci 0000:00:1d.0: [8086:9c26] type 00 class 0x0c0320 |
| [ 0.080025] pci 0000:00:1d.0: reg 0x10: [mem 0xe051f800-0xe051fbff] |
| [ 0.080126] pci 0000:00:1d.0: PME# supported from D0 D3hot D3cold |
| [ 0.080181] pci 0000:00:1d.0: System wakeup disabled by ACPI |
| [ 0.080230] pci 0000:00:1f.0: [8086:9c45] type 00 class 0x060100 |
| [ 0.080437] pci 0000:00:1f.2: [8086:9c03] type 00 class 0x010601 |
| [ 0.080455] pci 0000:00:1f.2: reg 0x10: [io 0x1860-0x1867] |
| [ 0.080464] pci 0000:00:1f.2: reg 0x14: [io 0x1870-0x1873] |
| [ 0.080473] pci 0000:00:1f.2: reg 0x18: [io 0x1868-0x186f] |
| [ 0.080481] pci 0000:00:1f.2: reg 0x1c: [io 0x1874-0x1877] |
| [ 0.080490] pci 0000:00:1f.2: reg 0x20: [io 0x1840-0x185f] |
| [ 0.080499] pci 0000:00:1f.2: reg 0x24: [mem 0xe051f000-0xe051f7ff] |
| [ 0.080541] pci 0000:00:1f.2: PME# supported from D3hot |
| [ 0.080628] pci 0000:00:1f.3: [8086:9c22] type 00 class 0x0c0500 |
| [ 0.080645] pci 0000:00:1f.3: reg 0x10: [mem 0xe051fc00-0xe051fcff 64bit] |
| [ 0.080668] pci 0000:00:1f.3: reg 0x20: [io 0x0400-0x041f] |
| [ 0.080775] pci 0000:00:1f.6: [8086:9c24] type 00 class 0x118000 |
| [ 0.080809] pci 0000:00:1f.6: reg 0x10: [mem 0xe051e000-0xe051efff 64bit] |
| [ 0.081071] pci 0000:01:00.0: [168c:0034] type 00 class 0x028000 |
| [ 0.081099] pci 0000:01:00.0: reg 0x10: [mem 0xe0400000-0xe047ffff 64bit] |
| [ 0.081158] pci 0000:01:00.0: reg 0x30: [mem 0xe0480000-0xe048ffff pref] |
| [ 0.081231] pci 0000:01:00.0: supports D1 D2 |
| [ 0.081234] pci 0000:01:00.0: PME# supported from D0 D1 D2 D3hot D3cold |
| [ 0.082986] pci 0000:00:1c.0: PCI bridge to [bus 01] |
| [ 0.082993] pci 0000:00:1c.0: bridge window [mem 0xe0400000-0xe04fffff] |
| [ 0.083118] ACPI: PCI Interrupt Link [LNKA] (IRQs 1 3 4 5 6 7 10 12 14 15) *11, disabled. |
| [ 0.083175] ACPI: PCI Interrupt Link [LNKB] (IRQs 1 3 4 5 6 7 11 12 14 15) *10, disabled. |
| [ 0.083228] ACPI: PCI Interrupt Link [LNKC] (IRQs 1 3 4 5 6 7 10 12 14 15) *11, disabled. |
| [ 0.083279] ACPI: PCI Interrupt Link [LNKD] (IRQs 1 3 4 5 6 7 *11 12 14 15), disabled. |
| [ 0.083330] ACPI: PCI Interrupt Link [LNKE] (IRQs 1 3 4 5 6 7 10 12 14 15) *0, disabled. |
| [ 0.083380] ACPI: PCI Interrupt Link [LNKF] (IRQs 1 3 4 5 6 7 11 12 14 15) *0, disabled. |
| [ 0.083430] ACPI: PCI Interrupt Link [LNKG] (IRQs 1 3 4 5 6 7 10 12 14 15) *0, disabled. |
| [ 0.083482] ACPI: PCI Interrupt Link [LNKH] (IRQs 1 3 4 5 6 7 11 12 14 15) *0, disabled. |
| [ 0.084191] ACPI : EC: GPE = 0x24, I/O: command/status = 0x66, data = 0x62 |
| [ 0.084335] vgaarb: setting as boot device: PCI:0000:00:02.0 |
| [ 0.084338] vgaarb: device added: PCI:0000:00:02.0,decodes=io+mem,owns=io+mem,locks=none |
| [ 0.084342] vgaarb: loaded |
| [ 0.084344] vgaarb: bridge control possible 0000:00:02.0 |
| [ 0.084438] SCSI subsystem initialized |
| [ 0.084478] ACPI: bus type USB registered |
| [ 0.084502] usbcore: registered new interface driver usbfs |
| [ 0.084513] usbcore: registered new interface driver hub |
| [ 0.084548] usbcore: registered new device driver usb |
| [ 0.084672] PCI: Using ACPI for IRQ routing |
| [ 0.086298] PCI: pci_cache_line_size set to 64 bytes |
| [ 0.086353] e820: reserve RAM buffer [mem 0x0009fc00-0x0009ffff] |
| [ 0.086355] e820: reserve RAM buffer [mem 0x7f6bd000-0x7fffffff] |
| [ 0.086357] e820: reserve RAM buffer [mem 0x17ce00000-0x17fffffff] |
| [ 0.086504] NetLabel: Initializing |
| [ 0.086506] NetLabel: domain hash size = 128 |
| [ 0.086507] NetLabel: protocols = UNLABELED CIPSOv4 |
| [ 0.086524] NetLabel: unlabeled traffic allowed by default |
| [ 0.086663] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0, 0, 0, 0, 0 |
| [ 0.086671] hpet0: 8 comparators, 64-bit 14.318180 MHz counter |
| [ 0.088709] Switched to clocksource hpet |
| [ 0.096653] pnp: PnP ACPI init |
| [ 0.096767] system 00:00: [mem 0xfed1c000-0xfed1ffff] has been reserved |
| [ 0.096771] system 00:00: [mem 0xfed10000-0xfed17fff] has been reserved |
| [ 0.096773] system 00:00: [mem 0xfed18000-0xfed18fff] has been reserved |
| [ 0.096776] system 00:00: [mem 0xfed19000-0xfed19fff] has been reserved |
| [ 0.096779] system 00:00: [mem 0xf0000000-0xf3ffffff] has been reserved |
| [ 0.096781] system 00:00: [mem 0xfed20000-0xfed3ffff] has been reserved |
| [ 0.096784] system 00:00: [mem 0xfed40000-0xfed44fff] has been reserved |
| [ 0.096787] system 00:00: [mem 0xfed45000-0xfed8ffff] could not be reserved |
| [ 0.096791] system 00:00: Plug and Play ACPI device, IDs PNP0c02 (active) |
| [ 0.097076] system 00:01: [mem 0xfed00000-0xfed003ff] has been reserved |
| [ 0.097080] system 00:01: Plug and Play ACPI device, IDs PNP0103 PNP0c01 (active) |
| [ 0.097150] system 00:02: [io 0x1000-0x10fe] could not be reserved |
| [ 0.097153] system 00:02: Plug and Play ACPI device, IDs PNP0c02 (active) |
| [ 0.097181] pnp 00:03: Plug and Play ACPI device, IDs PNP0b00 (active) |
| [ 0.097225] system 00:04: [io 0x0900-0x09fe] has been reserved |
| [ 0.097228] system 00:04: Plug and Play ACPI device, IDs PNP0c02 (active) |
| [ 0.097272] system 00:05: [io 0x0200] has been reserved |
| [ 0.097275] system 00:05: [io 0x0204] has been reserved |
| [ 0.097277] system 00:05: [io 0x0800-0x087f] has been reserved |
| [ 0.097279] system 00:05: [io 0x0880-0x08ff] has been reserved |
| [ 0.097282] system 00:05: Plug and Play ACPI device, IDs PNP0c02 (active) |
| [ 0.097322] pnp 00:06: Plug and Play ACPI device, IDs PNP0501 (active) |
| [ 0.097357] pnp 00:07: Plug and Play ACPI device, IDs PNP0303 PNP030b (active) |
| [ 0.097458] system 00:08: Plug and Play ACPI device, IDs PNP0c02 (active) |
| [ 0.097584] pnp: PnP ACPI: found 9 devices |
| [ 0.104318] pci 0000:00:1c.0: PCI bridge to [bus 01] |
| [ 0.104326] pci 0000:00:1c.0: bridge window [mem 0xe0400000-0xe04fffff] |
| [ 0.104336] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7] |
| [ 0.104338] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff] |
| [ 0.104341] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff] |
| [ 0.104343] pci_bus 0000:00: resource 7 [mem 0x000c0000-0x000c3fff] |
| [ 0.104345] pci_bus 0000:00: resource 8 [mem 0x000c4000-0x000c7fff] |
| [ 0.104347] pci_bus 0000:00: resource 9 [mem 0x000c8000-0x000cbfff] |
| [ 0.104349] pci_bus 0000:00: resource 10 [mem 0x000d0000-0x000d3fff] |
| [ 0.104351] pci_bus 0000:00: resource 11 [mem 0x000d4000-0x000d7fff] |
| [ 0.104354] pci_bus 0000:00: resource 12 [mem 0x000d8000-0x000dbfff] |
| [ 0.104356] pci_bus 0000:00: resource 13 [mem 0x000dc000-0x000dffff] |
| [ 0.104358] pci_bus 0000:00: resource 14 [mem 0x000e0000-0x000e3fff] |
| [ 0.104360] pci_bus 0000:00: resource 15 [mem 0x000e4000-0x000e7fff] |
| [ 0.104362] pci_bus 0000:00: resource 16 [mem 0x000e8000-0x000ebfff] |
| [ 0.104364] pci_bus 0000:00: resource 17 [mem 0x000ec000-0x000effff] |
| [ 0.104366] pci_bus 0000:00: resource 18 [mem 0x000f0000-0x000fffff] |
| [ 0.104368] pci_bus 0000:00: resource 19 [mem 0x82200001-0xfebfffff] |
| [ 0.104371] pci_bus 0000:00: resource 20 [mem 0xfed40000-0xfed44fff] |
| [ 0.104373] pci_bus 0000:01: resource 1 [mem 0xe0400000-0xe04fffff] |
| [ 0.104414] NET: Registered protocol family 2 |
| [ 0.104665] TCP established hash table entries: 32768 (order: 6, 262144 bytes) |
| [ 0.104783] TCP bind hash table entries: 32768 (order: 7, 524288 bytes) |
| [ 0.104864] TCP: Hash tables configured (established 32768 bind 32768) |
| [ 0.104887] TCP: reno registered |
| [ 0.104898] UDP hash table entries: 2048 (order: 4, 65536 bytes) |
| [ 0.104921] UDP-Lite hash table entries: 2048 (order: 4, 65536 bytes) |
| [ 0.104986] NET: Registered protocol family 1 |
| [ 0.105006] pci 0000:00:02.0: Video device with shadowed ROM |
| [ 0.105603] PCI: CLS 64 bytes, default 64 |
| [ 0.105666] Unpacking initramfs... |
| [ 0.975909] Freeing initrd memory: 33952K (ffff880033da0000 - ffff880035ec8000) |
| [ 0.975931] PCI-DMA: Using software bounce buffering for IO (SWIOTLB) |
| [ 0.975934] software IO TLB [mem 0x7b6bd000-0x7f6bd000] (64MB) mapped at [ffff88007b6bd000-ffff88007f6bcfff] |
| [ 0.976222] RAPL PMU detected, hw unit 2^-14 Joules, API unit is 2^-32 Joules, 4 fixed counters 655360 ms ovfl timer |
| [ 0.976274] microcode: CPU0 sig=0x40651, pf=0x40, revision=0x18 |
| [ 0.976283] microcode: CPU1 sig=0x40651, pf=0x40, revision=0x18 |
| [ 0.976351] microcode: Microcode Update Driver: v2.00 <tigran@aivazian.fsnet.co.uk>, Peter Oruba |
| [ 0.976954] futex hash table entries: 512 (order: 3, 32768 bytes) |
| [ 0.976973] Initialise system trusted keyring |
| [ 0.976998] audit: initializing netlink subsys (disabled) |
| [ 0.977015] audit: type=2000 audit(1414413280.967:1): initialized |
| [ 0.977470] HugeTLB registered 2 MB page size, pre-allocated 0 pages |
| [ 0.979538] zpool: loaded |
| [ 0.979541] zbud: loaded |
| [ 0.979769] VFS: Disk quotas dquot_6.5.2 |
| [ 0.979819] Dquot-cache hash table entries: 512 (order 0, 4096 bytes) |
| [ 0.979976] msgmni has been set to 7784 |
| [ 0.980052] Key type big_key registered |
| [ 0.980057] SELinux: Registering netfilter hooks |
| [ 0.981067] alg: No test for stdrng (krng) |
| [ 0.981080] NET: Registered protocol family 38 |
| [ 0.981094] Key type asymmetric registered |
| [ 0.981099] Asymmetric key parser 'x509' registered |
| [ 0.981152] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252) |
| [ 0.981194] io scheduler noop registered |
| [ 0.981200] io scheduler deadline registered (default) |
| [ 0.981241] io scheduler cfq registered |
| [ 0.981507] pcieport 0000:00:1c.0: irq 40 for MSI/MSI-X |
| [ 0.981642] aer 0000:00:1c.0:pcie02: service driver aer loaded |
| [ 0.981660] pcieport 0000:00:1c.0: Signaling PME through PCIe PME interrupt |
| [ 0.981663] pci 0000:01:00.0: Signaling PME through PCIe PME interrupt |
| [ 0.981667] pcie_pme 0000:00:1c.0:pcie01: service driver pcie_pme loaded |
| [ 0.981686] pci_hotplug: PCI Hot Plug PCI Core version: 0.5 |
| [ 0.981709] pciehp: PCI Express Hot Plug Controller Driver version: 0.4 |
| [ 0.981763] intel_idle: MWAIT substates: 0x11142120 |
| [ 0.981765] intel_idle: v0.4 model 0x45 |
| [ 0.981767] intel_idle: lapic_timer_reliable_states 0xffffffff |
| [ 0.982005] ACPI: AC Adapter [AC] (on-line) |
| [ 0.982122] input: Lid Switch as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0D:00/input/input0 |
| [ 0.982148] ACPI: Lid Switch [LID0] |
| [ 0.982193] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input1 |
| [ 0.982197] ACPI: Power Button [PWRB] |
| [ 0.982238] input: Sleep Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0E:00/input/input2 |
| [ 0.982240] ACPI: Sleep Button [TPAD] |
| [ 0.982280] input: Sleep Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0E:01/input/input3 |
| [ 0.982282] ACPI: Sleep Button [TSCR] |
| [ 0.982323] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input4 |
| [ 0.982326] ACPI: Power Button [PWRF] |
| [ 0.983066] thermal LNXTHERM:00: registered as thermal_zone0 |
| [ 0.983068] ACPI: Thermal Zone [THRM] (40 C) |
| [ 0.983113] GHES: HEST is not enabled! |
| [ 0.983603] ACPI: Battery Slot [BAT0] (battery present) |
| [ 0.983618] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled |
| [ 0.984239] Non-volatile memory driver v1.3 |
| [ 0.984243] Linux agpgart interface v0.103 |
| [ 0.984352] rdac: device handler registered |
| [ 0.984390] hp_sw: device handler registered |
| [ 0.984395] emc: device handler registered |
| [ 0.984398] alua: device handler registered |
| [ 0.984451] libphy: Fixed MDIO Bus: probed |
| [ 0.984510] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver |
| [ 0.984515] ohci-pci: OHCI PCI platform driver |
| [ 0.984532] uhci_hcd: USB Universal Host Controller Interface driver |
| [ 0.984718] xhci_hcd 0000:00:14.0: xHCI Host Controller |
| [ 0.984772] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 1 |
| [ 0.984862] xhci_hcd 0000:00:14.0: cache line size of 64 is not supported |
| [ 0.984882] xhci_hcd 0000:00:14.0: irq 41 for MSI/MSI-X |
| [ 0.984954] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002 |
| [ 0.984957] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 |
| [ 0.984959] usb usb1: Product: xHCI Host Controller |
| [ 0.984962] usb usb1: Manufacturer: Linux 3.17.0 xhci_hcd |
| [ 0.984963] usb usb1: SerialNumber: 0000:00:14.0 |
| [ 0.985218] hub 1-0:1.0: USB hub found |
| [ 0.985232] hub 1-0:1.0: 8 ports detected |
| [ 0.985499] xhci_hcd 0000:00:14.0: xHCI Host Controller |
| [ 0.985662] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 2 |
| [ 0.985711] usb usb2: New USB device found, idVendor=1d6b, idProduct=0003 |
| [ 0.985714] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1 |
| [ 0.985716] usb usb2: Product: xHCI Host Controller |
| [ 0.985718] usb usb2: Manufacturer: Linux 3.17.0 xhci_hcd |
| [ 0.985720] usb usb2: SerialNumber: 0000:00:14.0 |
| [ 0.985980] hub 2-0:1.0: USB hub found |
| [ 0.985991] hub 2-0:1.0: 4 ports detected |
| [ 0.986204] usbcore: registered new interface driver usbserial |
| [ 0.986213] usbcore: registered new interface driver usbserial_generic |
| [ 0.986223] usbserial: USB Serial support registered for generic |
| [ 0.986262] i8042: PNP: PS/2 Controller [PNP0303:PS2K] at 0x60,0x64 irq 1 |
| [ 0.986264] i8042: PNP: PS/2 appears to have AUX port disabled, if this is incorrect please boot with i8042.nopnp |
| [ 0.986811] i8042: Warning: Keylock active |
| [ 0.986999] serio: i8042 KBD port at 0x60,0x64 irq 1 |
| [ 0.987195] mousedev: PS/2 mouse device common for all mice |
| [ 0.987629] rtc_cmos 00:03: RTC can wake from S4 |
| [ 0.987787] rtc_cmos 00:03: rtc core: registered rtc_cmos as rtc0 |
| [ 0.987820] rtc_cmos 00:03: alarms up to one month, 242 bytes nvram, hpet irqs |
| [ 0.987851] Intel P-state driver initializing. |
| [ 0.988204] hidraw: raw HID events driver (C) Jiri Kosina |
| [ 0.988541] usbcore: registered new interface driver usbhid |
| [ 0.988544] usbhid: USB HID core driver |
| [ 0.988650] drop_monitor: Initializing network drop monitor service |
| [ 0.988810] TCP: cubic registered |
| [ 0.988825] Initializing XFRM netlink socket |
| [ 0.988836] IPv6: Loaded, but administratively disabled, reboot required to enable |
| [ 0.988846] NET: Registered protocol family 17 |
| [ 0.989635] Loading compiled-in X.509 certificates |
| [ 0.991835] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input5 |
| [ 0.992065] Loaded X.509 cert 'Magrathea: Glacier signing key: 0a4c67a3cc4d0d194b1d1b3da57591c7067b94f1' |
| [ 0.992098] registered taskstats version 1 |
| [ 0.992136] zswap: loading zswap |
| [ 0.992139] zpool: creating pool type zbud |
| [ 0.992143] zpool: created zbud pool |
| [ 0.992145] zswap: using zbud pool |
| [ 0.992158] zswap: using lzo compressor |
| [ 0.996299] Key type trusted registered |
| [ 0.999720] Key type encrypted registered |
| [ 1.001704] ima: No TPM chip found, activating TPM-bypass! |
| [ 1.001752] evm: HMAC attrs: 0x1 |
| [ 1.002073] rtc_cmos 00:03: setting system clock to 2014-10-27 12:34:41 UTC (1414413281) |
| [ 1.003409] Freeing unused kernel memory: 1692K (ffffffff81aa9000 - ffffffff81c50000) |
| [ 1.006756] systemd[1]: systemd 208 running in system mode. (+PAM +LIBWRAP +AUDIT +SELINUX +IMA +SYSVINIT +LIBCRYPTSETUP +GCRYPT +ACL +XZ) |
| [ 1.006939] systemd[1]: Running in initial RAM disk. |
| [ 1.007003] systemd[1]: Set hostname to <johnlewis.ie>. |
| [ 1.022423] random: systemd urandom read with 2 bits of entropy available |
| [ 1.054365] systemd[1]: Expecting device dev-disk-by\x2duuid-a7ecfe05\x2d3c38\x2d40fe\x2db281\x2d6e7c2b0123a8.device... |
| [ 1.054384] systemd[1]: Starting -.slice. |
| [ 1.054744] systemd[1]: Created slice -.slice. |
| [ 1.054803] systemd[1]: Starting System Slice. |
| [ 1.054888] systemd[1]: Created slice System Slice. |
| [ 1.054930] systemd[1]: Starting Slices. |
| [ 1.054943] systemd[1]: Reached target Slices. |
| [ 1.054974] systemd[1]: Starting Timers. |
| [ 1.054986] systemd[1]: Reached target Timers. |
| [ 1.055020] systemd[1]: Starting udev Kernel Socket. |
| [ 1.055048] systemd[1]: Listening on udev Kernel Socket. |
| [ 1.055086] systemd[1]: Starting udev Control Socket. |
| [ 1.055121] systemd[1]: Listening on udev Control Socket. |
| [ 1.055159] systemd[1]: Starting Journal Socket. |
| [ 1.055210] systemd[1]: Listening on Journal Socket. |
| [ 1.055413] systemd[1]: Starting dracut cmdline hook... |
| [ 1.055860] systemd[1]: Starting Create list of required static device nodes for the current kernel... |
| [ 1.056284] systemd[1]: Starting Apply Kernel Variables... |
| [ 1.056849] systemd[1]: Started Load Kernel Modules. |
| [ 1.056870] systemd[1]: Starting Sockets. |
| [ 1.056883] systemd[1]: Reached target Sockets. |
| [ 1.056929] systemd[1]: Starting Setup Virtual Console... |
| [ 1.057306] systemd[1]: Starting Journal Service... |
| [ 1.057727] systemd[1]: Started Journal Service. |
| [ 1.064236] systemd-journald[92]: Vacuuming done, freed 0 bytes |
| [ 1.219399] systemd-udevd[197]: starting version 208 |
| [ 1.327835] ACPI: Video Device [GFX0] (multi-head: yes rom: no post: no) |
| [ 1.327993] input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:00/input/input6 |
| [ 1.424512] usb 1-3: new high-speed USB device number 3 using xhci_hcd |
| [ 1.473999] sdhci: Secure Digital Host Controller Interface driver |
| [ 1.474003] sdhci: Copyright(c) Pierre Ossman |
| [ 1.489548] libata version 3.00 loaded. |
| [ 1.512838] [drm] Initialized drm 1.1.0 20060810 |
| [ 1.517191] ahci 0000:00:1f.2: version 3.0 |
| [ 1.517380] ahci 0000:00:1f.2: irq 42 for MSI/MSI-X |
| [ 1.517399] ahci 0000:00:1f.2: SSS flag set, parallel bus scan disabled |
| [ 1.517417] ahci 0000:00:1f.2: AHCI 0001.0300 32 slots 2 ports 6 Gbps 0x1 impl SATA mode |
| [ 1.517421] ahci 0000:00:1f.2: flags: 64bit ncq ilck stag pm led clo only pio slum part deso sadm sds apst |
| [ 1.650247] usb 1-3: New USB device found, idVendor=0bda, idProduct=5776 |
| [ 1.650253] usb 1-3: New USB device strings: Mfr=3, Product=1, SerialNumber=2 |
| [ 1.650256] usb 1-3: Product: HP Truevision HD |
| [ 1.650258] usb 1-3: Manufacturer: DDTPN01BI5NE0S |
| [ 1.650260] usb 1-3: SerialNumber: 200901010001 |
| [ 1.796925] scsi host0: ahci |
| [ 1.804275] scsi host1: ahci |
| [ 1.804354] ata1: SATA max UDMA/133 abar m2048@0xe051f000 port 0xe051f100 irq 42 |
| [ 1.804356] ata2: DUMMY |
| [ 1.805095] [drm] Memory usable by graphics device = 2048M |
| [ 1.805099] [drm] Replacing VGA console driver |
| [ 1.806435] Console: switching to colour dummy device 80x25 |
| [ 1.807186] i915 0000:00:02.0: irq 43 for MSI/MSI-X |
| [ 1.807197] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013). |
| [ 1.807198] [drm] Driver supports precise vblank timestamp query. |
| [ 1.807239] vgaarb: device changed decodes: PCI:0000:00:02.0,olddecodes=io+mem,decodes=io+mem:owns=io+mem |
| [ 1.807292] [drm] applying backlight present quirk |
| [ 1.833051] [drm] VBT doesn't support DRRS |
| [ 1.845640] fbcon: inteldrmfb (fb0) is primary device |
| [ 1.954449] usb 1-4: new full-speed USB device number 4 using xhci_hcd |
| [ 1.977431] tsc: Refined TSC clocksource calibration: 1396.766 MHz |
| [ 2.108412] ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300) |
| [ 2.110604] ata1.00: ATA-8: LITEONIT LSS-16L6G-HP, DS41702, max UDMA/133 |
| [ 2.110606] ata1.00: 31277232 sectors, multi 1: LBA48 NCQ (depth 31/32), AA |
| [ 2.110983] ata1.00: configured for UDMA/133 |
| [ 2.111079] scsi 0:0:0:0: Direct-Access ATA LITEONIT LSS-16L 702 PQ: 0 ANSI: 5 |
| [ 2.120091] usb 1-4: string descriptor 0 malformed (err = -61), defaulting to 0x0409 |
| [ 2.131687] usb 1-4: New USB device found, idVendor=0cf3, idProduct=311e |
| [ 2.131690] usb 1-4: New USB device strings: Mfr=1, Product=2, SerialNumber=3 |
| [ 2.135435] sd 0:0:0:0: [sda] 31277232 512-byte logical blocks: (16.0 GB/14.9 GiB) |
| [ 2.135486] sd 0:0:0:0: [sda] Write Protect is off |
| [ 2.135488] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 |
| [ 2.135504] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA |
| [ 2.135746] sda: sda1 |
| [ 2.135958] sd 0:0:0:0: [sda] Attached SCSI disk |
| [ 2.234452] usb 2-1: new SuperSpeed USB device number 2 using xhci_hcd |
| [ 2.245827] usb 2-1: New USB device found, idVendor=18a5, idProduct=0243 |
| [ 2.245829] usb 2-1: New USB device strings: Mfr=1, Product=2, SerialNumber=3 |
| [ 2.245831] usb 2-1: Product: STORE N GO |
| [ 2.245832] usb 2-1: Manufacturer: Verbatim |
| [ 2.245834] usb 2-1: SerialNumber: 14040350008015 |
| [ 2.272437] usb-storage 2-1:1.0: USB Mass Storage device detected |
| [ 2.273389] scsi host2: usb-storage 2-1:1.0 |
| [ 2.273692] usbcore: registered new interface driver usb-storage |
| [ 2.896310] Console: switching to colour frame buffer device 170x48 |
| [ 2.901710] i915 0000:00:02.0: fb0: inteldrmfb frame buffer device |
| [ 2.901715] i915 0000:00:02.0: registered panic notifier |
| [ 2.913331] [drm] Initialized i915 1.6.0 20140725 for 0000:00:02.0 on minor 0 |
| [ 3.081057] Switched to clocksource tsc |
| [ 3.086835] EXT4-fs (sda1): mounted filesystem with ordered data mode. Opts: (null) |
| [ 3.275607] scsi 2:0:0:0: Direct-Access Verbatim STORE N GO 1.00 PQ: 0 ANSI: 6 |
| [ 3.276041] sd 2:0:0:0: [sdb] 245760000 512-byte logical blocks: (125 GB/117 GiB) |
| [ 3.276156] sd 2:0:0:0: [sdb] Write Protect is off |
| [ 3.276159] sd 2:0:0:0: [sdb] Mode Sense: 23 00 00 00 |
| [ 3.276742] sd 2:0:0:0: [sdb] Write cache: disabled, read cache: disabled, doesn't support DPO or FUA |
| [ 3.278211] sdb: sdb1 |
| [ 3.280659] sd 2:0:0:0: [sdb] Attached SCSI removable disk |
| [ 3.367451] systemd-journald[92]: Received SIGTERM |
| [ 3.464660] SELinux: Disabled at runtime. |
| [ 3.464691] SELinux: Unregistering netfilter hooks |
| [ 3.487194] audit: type=1404 audit(1414413283.985:2): selinux=0 auid=4294967295 ses=4294967295 |
| [ 3.639947] random: nonblocking pool is initialized |
| [ 3.641812] systemd-readahead[332]: Bumped block_nr parameter of 8:0 to 20480. This is a temporary hack and should be removed one day. |
| [ 3.692796] systemd-journald[347]: Vacuuming done, freed 0 bytes |
| [ 3.741577] systemd-udevd[368]: starting version 208 |
| [ 3.914132] RPC: Registered named UNIX socket transport module. |
| [ 3.914137] RPC: Registered udp transport module. |
| [ 3.914139] RPC: Registered tcp transport module. |
| [ 3.914140] RPC: Registered tcp NFSv4.1 backchannel transport module. |
| [ 3.957115] device-mapper: uevent: version 1.0.3 |
| [ 3.957647] device-mapper: ioctl: 4.27.0-ioctl (2013-10-30) initialised: dm-devel@redhat.com |
| [ 4.072418] acpi INT33C2:00: Cannot transition to non-D0 state from D3 |
| [ 4.084891] acpi INT33C3:00: Cannot transition to non-D0 state from D3 |
| [ 4.085242] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4 |
| [ 4.086780] i801_smbus 0000:00:1f.3: SMBus using PCI Interrupt |
| [ 4.136088] input: PC Speaker as /devices/platform/pcspkr/input/input7 |
| [ 4.175401] Linux video capture interface: v2.00 |
| [ 4.268960] uvcvideo: Found UVC 1.00 device HP Truevision HD (0bda:5776) |
| [ 4.276491] input: HP Truevision HD as /devices/pci0000:00/0000:00:14.0/usb1/1-3/1-3:1.0/input/input8 |
| [ 4.278447] usbcore: registered new interface driver uvcvideo |
| [ 4.278451] USB Video Class driver (1.1.1) |
| [ 4.288411] Installing knfsd (copyright (C) 1996 okir@monad.swb.de). |
| [ 4.328594] alg: No test for crc32 (crc32-pclmul) |
| [ 4.366217] EXT4-fs (sda1): re-mounted. Opts: (null) |
| [ 4.366744] Bluetooth: Core ver 2.19 |
| [ 4.366770] NET: Registered protocol family 31 |
| [ 4.366772] Bluetooth: HCI device and connection manager initialized |
| [ 4.366779] Bluetooth: HCI socket layer initialized |
| [ 4.366782] Bluetooth: L2CAP socket layer initialized |
| [ 4.366789] Bluetooth: SCO socket layer initialized |
| [ 4.543151] usbcore: registered new interface driver btusb |
| [ 4.555141] usbcore: registered new interface driver ath3k |
| [ 4.652947] snd_hda_intel 0000:00:1b.0: irq 44 for MSI/MSI-X |
| [ 4.654173] snd_hda_intel 0000:00:03.0: irq 45 for MSI/MSI-X |
| [ 4.875921] cfg80211: Calling CRDA to update world regulatory domain |
| [ 4.907134] sound hdaudioC1D0: autoconfig: line_outs=1 (0x14/0x0/0x0/0x0/0x0) type:speaker |
| [ 4.907140] sound hdaudioC1D0: speaker_outs=0 (0x0/0x0/0x0/0x0/0x0) |
| [ 4.907143] sound hdaudioC1D0: hp_outs=1 (0x21/0x0/0x0/0x0/0x0) |
| [ 4.907145] sound hdaudioC1D0: mono: mono_out=0x0 |
| [ 4.907146] sound hdaudioC1D0: inputs: |
| [ 4.907149] sound hdaudioC1D0: Mic=0x19 |
| [ 4.907151] sound hdaudioC1D0: Internal Mic=0x12 |
| [ 4.914593] input: HDA Intel HDMI HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:03.0/sound/card0/input9 |
| [ 4.914789] input: HDA Intel HDMI HDMI/DP,pcm=7 as /devices/pci0000:00/0000:00:03.0/sound/card0/input10 |
| [ 4.914862] input: HDA Intel HDMI HDMI/DP,pcm=8 as /devices/pci0000:00/0000:00:03.0/sound/card0/input11 |
| [ 4.914954] iTCO_vendor_support: vendor-support=0 |
| [ 4.919090] input: HDA Intel PCH Mic as /devices/pci0000:00/0000:00:1b.0/sound/card1/input12 |
| [ 4.919169] input: HDA Intel PCH Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card1/input13 |
| [ 4.926054] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.11 |
| [ 4.926090] iTCO_wdt: Found a Lynx Point_LP TCO device (Version=2, TCOBASE=0x1060) |
| [ 4.942149] cfg80211: World regulatory domain updated: |
| [ 4.942154] cfg80211: DFS Master region: unset |
| [ 4.942156] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp), (dfs_cac_time) |
| [ 4.942159] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (N/A, 2000 mBm), (N/A) |
| [ 4.942162] cfg80211: (2457000 KHz - 2482000 KHz @ 40000 KHz), (N/A, 2000 mBm), (N/A) |
| [ 4.942164] cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (N/A, 2000 mBm), (N/A) |
| [ 4.942166] cfg80211: (5170000 KHz - 5250000 KHz @ 80000 KHz), (N/A, 2000 mBm), (N/A) |
| [ 4.942168] cfg80211: (5735000 KHz - 5835000 KHz @ 80000 KHz), (N/A, 2000 mBm), (N/A) |
| [ 4.942170] cfg80211: (57240000 KHz - 63720000 KHz @ 2160000 KHz), (N/A, 0 mBm), (N/A) |
| [ 4.943515] iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0) |
| [ 4.943663] input: Cypress APA Trackpad (cyapa) as /devices/pci0000:00/0000:00:15.1/i2c-7/7-0067/input/input14 |
| [ 5.822348] ath: phy0: ASPM enabled: 0x43 |
| [ 5.822353] ath: EEPROM regdomain: 0x6a |
| [ 5.822355] ath: EEPROM indicates we should expect a direct regpair map |
| [ 5.822358] ath: Country alpha2 being used: 00 |
| [ 5.822359] ath: Regpair used: 0x6a |
| [ 5.829677] ieee80211 phy0: Selected rate control algorithm 'minstrel_ht' |
| [ 5.830098] ieee80211 phy0: Atheros AR9462 Rev:2 mem=0xffffc90005300000, irq=16 |
| [ 5.834381] ath9k 0000:01:00.0 wlp1s0: renamed from wlan0 |
| [ 5.844845] cfg80211: Calling CRDA for country: IE |
| [ 5.844855] systemd-udevd[373]: renamed network interface wlan0 to wlp1s0 |
| [ 5.853035] cfg80211: Regulatory domain changed to country: IE |
| [ 5.853040] cfg80211: DFS Master region: unset |
| [ 5.853042] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp), (dfs_cac_time) |
| [ 5.853046] cfg80211: (2402000 KHz - 2482000 KHz @ 40000 KHz), (N/A, 2000 mBm), (N/A) |
| [ 5.853048] cfg80211: (5170000 KHz - 5250000 KHz @ 80000 KHz), (N/A, 2000 mBm), (N/A) |
| [ 5.853051] cfg80211: (5250000 KHz - 5330000 KHz @ 80000 KHz), (N/A, 2000 mBm), (0 s) |
| [ 5.853060] cfg80211: (5490000 KHz - 5710000 KHz @ 80000 KHz), (N/A, 2700 mBm), (0 s) |
| [ 5.853063] cfg80211: (57240000 KHz - 65880000 KHz @ 2160000 KHz), (N/A, 4000 mBm), (N/A) |
| [ 17.866827] EXT4-fs (dm-0): mounted filesystem with ordered data mode. Opts: commit=300 |
| [ 17.885739] systemd-journald[347]: Received request to flush runtime journal from PID 1 |
| [ 17.888431] audit: type=1305 audit(1414413298.388:3): audit_pid=573 old=0 auid=4294967295 ses=4294967295 res=1 |
| [ 18.129015] sd 0:0:0:0: Attached scsi generic sg0 type 0 |
| [ 18.132184] sd 2:0:0:0: Attached scsi generic sg1 type 0 |
| [ 18.171507] Bluetooth: BNEP (Ethernet Emulation) ver 1.3 |
| [ 18.171512] Bluetooth: BNEP filters: protocol multicast |
| [ 18.171520] Bluetooth: BNEP socket layer initialized |
| [ 18.228756] Bluetooth: RFCOMM TTY layer initialized |
| [ 18.228769] Bluetooth: RFCOMM socket layer initialized |
| [ 18.228776] Bluetooth: RFCOMM ver 1.11 |
| [ 19.843664] Ebtables v2.0 registered |
| [ 19.880266] ip_tables: (C) 2000-2006 Netfilter Core Team |
| [ 19.918758] ip6_tables: (C) 2000-2006 Netfilter Core Team |
| [ 20.236294] Bridge firewalling registered |
| [ 20.258624] tun: Universal TUN/TAP device driver, 1.6 |
| [ 20.258628] tun: (C) 1999-2004 Max Krasnyansky <maxk@qualcomm.com> |
| [ 20.290699] device virbr0-nic entered promiscuous mode |
| [ 20.300460] virbr0: port 1(virbr0-nic) entered forwarding state |
| [ 20.300474] virbr0: port 1(virbr0-nic) entered forwarding state |
| [ 20.788859] nf_conntrack version 0.5.0 (16384 buckets, 65536 max) |
| [ 20.912284] virbr0: port 1(virbr0-nic) entered disabled state |
| [ 24.591235] wlp1s0: authenticate with a0:f3:c1:db:e3:48 |
| [ 24.604028] wlp1s0: send auth to a0:f3:c1:db:e3:48 (try 1/3) |
| [ 24.606102] wlp1s0: authenticated |
| [ 24.606640] wlp1s0: associate with a0:f3:c1:db:e3:48 (try 1/3) |
| [ 24.611908] wlp1s0: RX AssocResp from a0:f3:c1:db:e3:48 (capab=0x431 status=0 aid=5) |
| [ 24.611994] wlp1s0: associated |
| [ 34.787587] fuse init (API version 7.23) |
| [ 54.452072] usb 1-2: new high-speed USB device number 5 using xhci_hcd |
| [ 54.622226] usb 1-2: New USB device found, idVendor=1c6b, idProduct=a223 |
| [ 54.622236] usb 1-2: New USB device strings: Mfr=1, Product=2, SerialNumber=3 |
| [ 54.622241] usb 1-2: Product: Mass Storage Device |
| [ 54.622245] usb 1-2: Manufacturer: USB2.0 External |
| [ 54.622248] usb 1-2: SerialNumber: 72 628323404413 |
| [ 54.625375] usb-storage 1-2:1.0: USB Mass Storage device detected |
| [ 54.625643] scsi host3: usb-storage 1-2:1.0 |
| [ 55.634407] scsi 3:0:0:0: CD-ROM Slimtype eTAU108 3 AL04 PQ: 0 ANSI: 0 |
| [ 55.636908] scsi 3:0:0:0: Attached scsi generic sg2 type 5 |
| [ 55.694908] sr 3:0:0:0: [sr0] scsi3-mmc drive: 188x/24x writer dvd-ram cd/rw xa/form2 cdda pop-up |
| [ 55.694913] cdrom: Uniform CD-ROM driver Revision: 3.20 |
| [ 55.695425] sr 3:0:0:0: Attached scsi CD-ROM sr0 |
| [ 67.773929] UDF-fs: INFO Mounting volume 'FRTMCFRE_EN_DVD', timestamp 2009/06/05 22:24 (1000) |
| [ 77.267095] usb 1-8: new full-speed USB device number 6 using xhci_hcd |
| [ 77.433590] usb 1-8: New USB device found, idVendor=0483, idProduct=dada |
| [ 77.433598] usb 1-8: New USB device strings: Mfr=1, Product=2, SerialNumber=3 |
| [ 77.433603] usb 1-8: Product: SF100-ISP |
| [ 77.433606] usb 1-8: Manufacturer: DediProg |
| [ 77.433610] usb 1-8: SerialNumber: 20060104-0006 |
| [ 161.939517] usb 1-2: USB disconnect, device number 5 |
| [ 161.942582] cdrom: issuing MRW background format suspend |
| [ 170.452453] usb 1-2: new high-speed USB device number 7 using xhci_hcd |
| [ 170.621875] usb 1-2: New USB device found, idVendor=1c6b, idProduct=a223 |
| [ 170.621882] usb 1-2: New USB device strings: Mfr=1, Product=2, SerialNumber=3 |
| [ 170.621886] usb 1-2: Product: Mass Storage Device |
| [ 170.621890] usb 1-2: Manufacturer: USB2.0 External |
| [ 170.621893] usb 1-2: SerialNumber: 72 628323404413 |
| [ 170.625467] usb-storage 1-2:1.0: USB Mass Storage device detected |
| [ 170.627457] scsi host4: usb-storage 1-2:1.0 |
| [ 171.638495] scsi 4:0:0:0: CD-ROM Slimtype eTAU108 3 AL04 PQ: 0 ANSI: 0 |
| [ 171.665064] sr 4:0:0:0: [sr0] scsi3-mmc drive: 24x/24x writer dvd-ram cd/rw xa/form2 cdda pop-up |
| [ 171.665416] sr 4:0:0:0: Attached scsi CD-ROM sr0 |
| [ 171.665592] sr 4:0:0:0: Attached scsi generic sg2 type 5 |
| [ 183.410386] UDF-fs: INFO Mounting volume 'FRTMCFRE_EN_DVD', timestamp 2009/06/05 22:24 (1000) |
| [ 906.342224] device vnet0 entered promiscuous mode |
| [ 906.344175] virbr0: port 2(vnet0) entered listening state |
| [ 906.344186] virbr0: port 2(vnet0) entered listening state |
| [ 908.345696] virbr0: port 2(vnet0) entered learning state |
| [ 910.349335] virbr0: topology change detected, propagating |
| [ 910.349345] virbr0: port 2(vnet0) entered forwarding state |
| [ 1243.336455] usb 1-2: USB disconnect, device number 7 |
| [ 3347.401991] perf interrupt took too long (2514 > 2500), lowering kernel.perf_event_max_sample_rate to 50000 |
| [ 3645.771202] TCP: lp registered |
| [ 4408.864155] virbr0: port 2(vnet0) entered disabled state |
| [ 4408.865691] device vnet0 left promiscuous mode |
| [ 4408.865725] virbr0: port 2(vnet0) entered disabled state |
| [ 4410.120681] device vnet0 entered promiscuous mode |
| [ 4410.129696] virbr0: port 2(vnet0) entered listening state |
| [ 4410.129710] virbr0: port 2(vnet0) entered listening state |
| [ 4412.134992] virbr0: port 2(vnet0) entered learning state |
| [ 4414.138645] virbr0: topology change detected, propagating |
| [ 4414.138655] virbr0: port 2(vnet0) entered forwarding state |
| [ 5619.517476] virbr0: port 2(vnet0) entered disabled state |
| [ 5619.518602] device vnet0 left promiscuous mode |
| [ 5619.518630] virbr0: port 2(vnet0) entered disabled state |
| [ 5620.125086] device vnet0 entered promiscuous mode |
| [ 5620.131053] virbr0: port 2(vnet0) entered listening state |
| [ 5620.131064] virbr0: port 2(vnet0) entered listening state |
| [ 5622.136472] virbr0: port 2(vnet0) entered learning state |
| [ 5624.140130] virbr0: topology change detected, propagating |
| [ 5624.140140] virbr0: port 2(vnet0) entered forwarding state |
| [ 6185.915864] usb 1-8: reset full-speed USB device number 6 using xhci_hcd |
| [ 6185.915878] xhci_hcd 0000:00:14.0: Setup ERROR: setup context command for slot 6. |
| [ 6185.915882] usb 1-8: hub failed to enable device, error -22 |
| [ 6186.068687] usb 1-8: reset full-speed USB device number 6 using xhci_hcd |
| [ 6186.068706] xhci_hcd 0000:00:14.0: Setup ERROR: setup context command for slot 6. |
| [ 6186.068710] usb 1-8: hub failed to enable device, error -22 |
| [ 6186.221753] usb 1-8: reset full-speed USB device number 6 using xhci_hcd |
| [ 6186.234157] xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff8801730c1a08 |
| [ 6186.234162] xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff8801730c19c0 |
| [ 6186.430785] usb 1-8: reset full-speed USB device number 6 using xhci_hcd |
| [ 6186.430809] xhci_hcd 0000:00:14.0: Setup ERROR: setup context command for slot 6. |
| [ 6186.430813] usb 1-8: hub failed to enable device, error -22 |
| [ 6186.583587] usb 1-8: reset full-speed USB device number 6 using xhci_hcd |
| [ 6186.583606] xhci_hcd 0000:00:14.0: Setup ERROR: setup context command for slot 6. |
| [ 6186.583610] usb 1-8: hub failed to enable device, error -22 |
| [ 6186.736628] usb 1-8: reset full-speed USB device number 6 using xhci_hcd |
| [ 6186.749060] xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff8801730c1a08 |
| [ 6186.749066] xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff8801730c19c0 |
| [ 6825.771464] kvm: zapping shadow pages for mmio generation wraparound |
| [ 6826.212969] usb 1-8: reset full-speed USB device number 6 using xhci_hcd |
| [ 6826.213042] xhci_hcd 0000:00:14.0: Setup ERROR: setup context command for slot 6. |
| [ 6826.213050] usb 1-8: hub failed to enable device, error -22 |
| [ 6826.365875] usb 1-8: reset full-speed USB device number 6 using xhci_hcd |
| [ 6826.365950] xhci_hcd 0000:00:14.0: Setup ERROR: setup context command for slot 6. |
| [ 6826.365962] usb 1-8: hub failed to enable device, error -22 |
| [ 6826.518783] usb 1-8: reset full-speed USB device number 6 using xhci_hcd |
| [ 6826.530929] xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff8801730c1a08 |
| [ 6826.530935] xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff8801730c19c0 |
| [ 6855.339926] usb 1-8: reset full-speed USB device number 6 using xhci_hcd |
| [ 6855.339942] xhci_hcd 0000:00:14.0: Setup ERROR: setup context command for slot 6. |
| [ 6855.339946] usb 1-8: hub failed to enable device, error -22 |
| [ 6855.492891] usb 1-8: reset full-speed USB device number 6 using xhci_hcd |
| [ 6855.492909] xhci_hcd 0000:00:14.0: Setup ERROR: setup context command for slot 6. |
| [ 6855.492913] usb 1-8: hub failed to enable device, error -22 |
| [ 6855.645783] usb 1-8: reset full-speed USB device number 6 using xhci_hcd |
| [ 6855.657974] xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff8801730c1a08 |
| [ 6855.657980] xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff8801730c19c0 |
| [ 6855.842880] usb 1-8: reset full-speed USB device number 6 using xhci_hcd |
| [ 6855.842926] xhci_hcd 0000:00:14.0: Setup ERROR: setup context command for slot 6. |
| [ 6855.842931] usb 1-8: hub failed to enable device, error -22 |
| [ 6855.995642] usb 1-8: reset full-speed USB device number 6 using xhci_hcd |
| [ 6855.995656] xhci_hcd 0000:00:14.0: Setup ERROR: setup context command for slot 6. |
| [ 6855.995660] usb 1-8: hub failed to enable device, error -22 |
| [ 6856.148593] usb 1-8: reset full-speed USB device number 6 using xhci_hcd |
| [ 6856.160873] xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff8801730c1a08 |
| [ 6856.160879] xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff8801730c19c0 |
| [12516.511713] usb 1-8: reset full-speed USB device number 6 using xhci_hcd |
| [12516.511786] xhci_hcd 0000:00:14.0: Setup ERROR: setup context command for slot 6. |
| [12516.511793] usb 1-8: hub failed to enable device, error -22 |
| [12516.664414] usb 1-8: reset full-speed USB device number 6 using xhci_hcd |
| [12516.664443] xhci_hcd 0000:00:14.0: Setup ERROR: setup context command for slot 6. |
| [12516.664449] usb 1-8: hub failed to enable device, error -22 |
| [12516.817551] usb 1-8: reset full-speed USB device number 6 using xhci_hcd |
| [12516.829946] xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff8801730c1a08 |
| [12516.829954] xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff8801730c19c0 |
| [12537.682894] usb 1-8: reset full-speed USB device number 6 using xhci_hcd |
| [12537.682914] xhci_hcd 0000:00:14.0: Setup ERROR: setup context command for slot 6. |
| [12537.682919] usb 1-8: hub failed to enable device, error -22 |
| [12537.835831] usb 1-8: reset full-speed USB device number 6 using xhci_hcd |
| [12537.835907] xhci_hcd 0000:00:14.0: Setup ERROR: setup context command for slot 6. |
| [12537.835912] usb 1-8: hub failed to enable device, error -22 |
| [12537.988898] usb 1-8: reset full-speed USB device number 6 using xhci_hcd |
| [12538.001311] xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff8801730c1a08 |
| [12538.001320] xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff8801730c19c0 |
| [12538.186965] usb 1-8: reset full-speed USB device number 6 using xhci_hcd |
| [12538.186984] xhci_hcd 0000:00:14.0: Setup ERROR: setup context command for slot 6. |
| [12538.186990] usb 1-8: hub failed to enable device, error -22 |
| [12538.339815] usb 1-8: reset full-speed USB device number 6 using xhci_hcd |
| [12538.339890] xhci_hcd 0000:00:14.0: Setup ERROR: setup context command for slot 6. |
| [12538.339895] usb 1-8: hub failed to enable device, error -22 |
| [12538.492771] usb 1-8: reset full-speed USB device number 6 using xhci_hcd |
| [12538.505504] xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff8801730c1a08 |
| [12538.505513] xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff8801730c19c0 |
| [13805.333544] virbr0: port 2(vnet0) entered disabled state |
| [13805.334481] device vnet0 left promiscuous mode |
| [13805.334505] virbr0: port 2(vnet0) entered disabled state |
| [13849.691534] usb 1-8: USB disconnect, device number 6 |
| [14086.403278] traps: polkitd[711] general protection ip:7f8bae9afcf2 sp:7fff7fe16200 error:0 in libmozjs-17.0.so[7f8bae871000+3b3000] |
| [15168.559457] wlp1s0: deauthenticating from a0:f3:c1:db:e3:48 by local choice (Reason: 3=DEAUTH_LEAVING) |
| [15168.773024] cfg80211: Calling CRDA to update world regulatory domain |
| [15168.781805] cfg80211: World regulatory domain updated: |
| [15168.781810] cfg80211: DFS Master region: unset |
| [15168.781812] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp), (dfs_cac_time) |
| [15168.781815] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (N/A, 2000 mBm), (N/A) |
| [15168.781818] cfg80211: (2457000 KHz - 2482000 KHz @ 40000 KHz), (N/A, 2000 mBm), (N/A) |
| [15168.781820] cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (N/A, 2000 mBm), (N/A) |
| [15168.781822] cfg80211: (5170000 KHz - 5250000 KHz @ 80000 KHz), (N/A, 2000 mBm), (N/A) |
| [15168.781824] cfg80211: (5735000 KHz - 5835000 KHz @ 80000 KHz), (N/A, 2000 mBm), (N/A) |
| [15168.781826] cfg80211: (57240000 KHz - 63720000 KHz @ 2160000 KHz), (N/A, 0 mBm), (N/A) |
| [15168.781873] cfg80211: Calling CRDA for country: IE |
| [15168.799676] cfg80211: Regulatory domain changed to country: IE |
| [15168.799682] cfg80211: DFS Master region: unset |
| [15168.799683] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp), (dfs_cac_time) |
| [15168.799687] cfg80211: (2402000 KHz - 2482000 KHz @ 40000 KHz), (N/A, 2000 mBm), (N/A) |
| [15168.799689] cfg80211: (5170000 KHz - 5250000 KHz @ 80000 KHz), (N/A, 2000 mBm), (N/A) |
| [15168.799691] cfg80211: (5250000 KHz - 5330000 KHz @ 80000 KHz), (N/A, 2000 mBm), (0 s) |
| [15168.799693] cfg80211: (5490000 KHz - 5710000 KHz @ 80000 KHz), (N/A, 2700 mBm), (0 s) |
| [15168.799695] cfg80211: (57240000 KHz - 65880000 KHz @ 2160000 KHz), (N/A, 4000 mBm), (N/A) |
| [15173.465935] PM: Syncing filesystems ... done. |
| [15173.485028] Freezing user space processes ... (elapsed 0.001 seconds) done. |
| [15173.486669] Freezing remaining freezable tasks ... (elapsed 0.001 seconds) done. |
| [15173.487980] Suspending console(s) (use no_console_suspend to debug) |
| [15173.589931] sd 0:0:0:0: [sda] Synchronizing SCSI cache |
| [15173.590772] sd 0:0:0:0: [sda] Stopping disk |
| [15174.350762] PM: suspend of devices complete after 862.790 msecs |
| [15174.363839] PM: late suspend of devices complete after 13.070 msecs |
| [15174.364718] xhci_hcd 0000:00:14.0: System wakeup enabled by ACPI |
| [15174.375939] PM: noirq suspend of devices complete after 12.097 msecs |
| [15174.376298] ACPI: Preparing to enter system sleep state S3 |
| [15174.376752] PM: Saving platform NVS memory |
| [15174.376753] Disabling non-boot CPUs ... |
| [15174.376824] intel_pstate CPU 1 exiting |
| [15174.377103] Broke affinity for irq 21 |
| [15174.377116] Broke affinity for irq 42 |
| [15174.378137] kvm: disabling virtualization on CPU1 |
| [15174.378149] smpboot: CPU 1 is now offline |
| [15174.380178] ACPI: Low-level resume complete |
| [15174.380239] PM: Restoring platform NVS memory |
| [15174.380628] Enabling non-boot CPUs ... |
| [15174.380673] x86: Booting SMP configuration: |
| [15174.380675] smpboot: Booting Node 0 Processor 1 APIC 0x2 |
| [15174.394097] CPU1 microcode updated early to revision 0x18, date = 2014-05-23 |
| [15174.395560] kvm: enabling virtualization on CPU1 |
| [15174.397969] CPU1 is up |
| [15174.399773] ACPI: Waking up from system sleep state S3 |
| [15174.471516] xhci_hcd 0000:00:14.0: System wakeup disabled by ACPI |
| [15174.471638] PM: noirq resume of devices complete after 71.674 msecs |
| [15174.477655] PM: early resume of devices complete after 5.991 msecs |
| [15174.477878] snd_hda_intel 0000:00:03.0: irq 44 for MSI/MSI-X |
| [15174.477952] ath: phy0: ASPM enabled: 0x43 |
| [15174.478030] snd_hda_intel 0000:00:1b.0: irq 45 for MSI/MSI-X |
| [15174.478133] rtc_cmos 00:03: System wakeup disabled by ACPI |
| [15174.488510] sd 0:0:0:0: [sda] Starting disk |
| [15174.784736] usb 1-4: reset full-speed USB device number 4 using xhci_hcd |
| [15174.784753] xhci_hcd 0000:00:14.0: Setup ERROR: setup context command for slot 3. |
| [15174.784755] usb 1-4: hub failed to enable device, error -22 |
| [15174.793397] ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300) |
| [15174.794135] ata1.00: configured for UDMA/133 |
| [15174.937641] usb 1-4: reset full-speed USB device number 4 using xhci_hcd |
| [15174.937660] xhci_hcd 0000:00:14.0: Setup ERROR: setup context command for slot 3. |
| [15174.937663] usb 1-4: hub failed to enable device, error -22 |
| [15175.090527] usb 1-4: reset full-speed USB device number 4 using xhci_hcd |
| [15175.101857] usb 1-4: device firmware changed |
| [15175.254726] usb 1-3: reset high-speed USB device number 3 using xhci_hcd |
| [15175.254747] xhci_hcd 0000:00:14.0: Setup ERROR: setup context command for slot 2. |
| [15175.254750] usb 1-3: hub failed to enable device, error -22 |
| [15175.407432] usb 1-3: reset high-speed USB device number 3 using xhci_hcd |
| [15175.407574] xhci_hcd 0000:00:14.0: Setup ERROR: setup context command for slot 2. |
| [15175.407579] usb 1-3: hub failed to enable device, error -22 |
| [15175.560432] usb 1-3: reset high-speed USB device number 3 using xhci_hcd |
| [15175.620228] xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff880172e61f60 |
| [15175.625919] PM: resume of devices complete after 1148.454 msecs |
| [15175.626266] Restarting tasks ... done. |
| [15175.644229] usb 1-4: USB disconnect, device number 4 |
| [15175.644640] xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff88007a7fbc00 |
| [15175.644644] xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff88007a7fbc90 |
| [15175.644646] xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff88007a7fbc48 |
| [15175.644649] xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff8800359664c8 |
| [15175.644651] xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff880035966480 |
| [15175.798296] usb 1-4: new full-speed USB device number 8 using xhci_hcd |
| [15175.963662] usb 1-4: string descriptor 0 malformed (err = -61), defaulting to 0x0409 |
| [15175.965540] usb 1-4: New USB device found, idVendor=0cf3, idProduct=311e |
| [15175.965544] usb 1-4: New USB device strings: Mfr=1, Product=2, SerialNumber=3 |
| [15176.004233] usb 1-4: USB disconnect, device number 8 |
| [15176.289177] usb 1-4: new full-speed USB device number 9 using xhci_hcd |
| [15176.454477] usb 1-4: string descriptor 0 malformed (err = -61), defaulting to 0x0409 |
| [15176.456338] usb 1-4: New USB device found, idVendor=0cf3, idProduct=311e |
| [15176.456342] usb 1-4: New USB device strings: Mfr=1, Product=2, SerialNumber=3 |
| [15181.829682] wlp1s0: authenticate with a0:f3:c1:db:e3:48 |
| [15181.839723] wlp1s0: send auth to a0:f3:c1:db:e3:48 (try 1/3) |
| [15181.842252] wlp1s0: authenticated |
| [15181.843329] wlp1s0: associate with a0:f3:c1:db:e3:48 (try 1/3) |
| [15181.847120] wlp1s0: RX AssocResp from a0:f3:c1:db:e3:48 (capab=0x431 status=0 aid=8) |
| [15181.847217] wlp1s0: associated |
| [35862.127252] perf interrupt took too long (5002 > 5000), lowering kernel.perf_event_max_sample_rate to 25000 |
| [107679.748014] wlp1s0: deauthenticating from a0:f3:c1:db:e3:48 by local choice (Reason: 3=DEAUTH_LEAVING) |
| [107679.764271] cfg80211: Calling CRDA to update world regulatory domain |
| [107679.767274] cfg80211: World regulatory domain updated: |
| [107679.767279] cfg80211: DFS Master region: unset |
| [107679.767281] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp), (dfs_cac_time) |
| [107679.767285] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (N/A, 2000 mBm), (N/A) |
| [107679.767287] cfg80211: (2457000 KHz - 2482000 KHz @ 40000 KHz), (N/A, 2000 mBm), (N/A) |
| [107679.767289] cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (N/A, 2000 mBm), (N/A) |
| [107679.767291] cfg80211: (5170000 KHz - 5250000 KHz @ 80000 KHz), (N/A, 2000 mBm), (N/A) |
| [107679.767293] cfg80211: (5735000 KHz - 5835000 KHz @ 80000 KHz), (N/A, 2000 mBm), (N/A) |
| [107679.767295] cfg80211: (57240000 KHz - 63720000 KHz @ 2160000 KHz), (N/A, 0 mBm), (N/A) |
| [107679.767315] cfg80211: Calling CRDA for country: IE |
| [107679.781034] cfg80211: Regulatory domain changed to country: IE |
| [107679.781039] cfg80211: DFS Master region: unset |
| [107679.781042] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp), (dfs_cac_time) |
| [107679.781045] cfg80211: (2402000 KHz - 2482000 KHz @ 40000 KHz), (N/A, 2000 mBm), (N/A) |
| [107679.781048] cfg80211: (5170000 KHz - 5250000 KHz @ 80000 KHz), (N/A, 2000 mBm), (N/A) |
| [107679.781050] cfg80211: (5250000 KHz - 5330000 KHz @ 80000 KHz), (N/A, 2000 mBm), (0 s) |
| [107679.781052] cfg80211: (5490000 KHz - 5710000 KHz @ 80000 KHz), (N/A, 2700 mBm), (0 s) |
| [107679.781054] cfg80211: (57240000 KHz - 65880000 KHz @ 2160000 KHz), (N/A, 4000 mBm), (N/A) |
| [107684.653311] PM: Syncing filesystems ... done. |
| [107684.673471] Freezing user space processes ... (elapsed 0.001 seconds) done. |
| [107684.675254] Freezing remaining freezable tasks ... (elapsed 0.001 seconds) done. |
| [107684.676516] Suspending console(s) (use no_console_suspend to debug) |
| [107684.778750] sd 0:0:0:0: [sda] Synchronizing SCSI cache |
| [107684.778814] sd 0:0:0:0: [sda] Stopping disk |
| [107685.639416] PM: suspend of devices complete after 962.896 msecs |
| [107685.650406] PM: late suspend of devices complete after 10.981 msecs |
| [107685.651369] xhci_hcd 0000:00:14.0: System wakeup enabled by ACPI |
| [107685.662648] PM: noirq suspend of devices complete after 12.239 msecs |
| [107685.663087] ACPI: Preparing to enter system sleep state S3 |
| [107685.663639] PM: Saving platform NVS memory |
| [107685.663641] Disabling non-boot CPUs ... |
| [107685.663717] intel_pstate CPU 1 exiting |
| [107685.664042] Broke affinity for irq 41 |
| [107685.664044] Broke affinity for irq 42 |
| [107685.665069] kvm: disabling virtualization on CPU1 |
| [107685.665083] smpboot: CPU 1 is now offline |
| [107685.667237] ACPI: Low-level resume complete |
| [107685.667298] PM: Restoring platform NVS memory |
| [107685.667708] Enabling non-boot CPUs ... |
| [107685.667753] x86: Booting SMP configuration: |
| [107685.667754] smpboot: Booting Node 0 Processor 1 APIC 0x2 |
| [107685.681181] CPU1 microcode updated early to revision 0x18, date = 2014-05-23 |
| [107685.682640] kvm: enabling virtualization on CPU1 |
| [107685.685064] CPU1 is up |
| [107685.686878] ACPI: Waking up from system sleep state S3 |
| [107685.698045] pci 0000:00:1d.0: Refused to change power state, currently in D3 |
| [107685.699105] xhci_hcd 0000:00:14.0: System wakeup disabled by ACPI |
| [107685.699231] PM: noirq resume of devices complete after 12.154 msecs |
| [107685.705229] PM: early resume of devices complete after 5.973 msecs |
| [107685.705636] snd_hda_intel 0000:00:03.0: irq 44 for MSI/MSI-X |
| [107685.705895] snd_hda_intel 0000:00:1b.0: irq 45 for MSI/MSI-X |
| [107685.705958] rtc_cmos 00:03: System wakeup disabled by ACPI |
| [107685.706355] ath: phy0: ASPM enabled: 0x43 |
| [107685.716137] sd 0:0:0:0: [sda] Starting disk |
| [107686.013272] usb 1-3: reset high-speed USB device number 3 using xhci_hcd |
| [107686.013326] xhci_hcd 0000:00:14.0: Setup ERROR: setup context command for slot 2. |
| [107686.013338] usb 1-3: hub failed to enable device, error -22 |
| [107686.021025] ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300) |
| [107686.021567] ata1.00: configured for UDMA/133 |
| [107686.166157] usb 1-3: reset high-speed USB device number 3 using xhci_hcd |
| [107686.166223] xhci_hcd 0000:00:14.0: Setup ERROR: setup context command for slot 2. |
| [107686.166227] usb 1-3: hub failed to enable device, error -22 |
| [107686.319164] usb 1-3: reset high-speed USB device number 3 using xhci_hcd |
| [107686.379429] xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff880172e61f60 |
| [107686.484351] usb 1-4: reset full-speed USB device number 9 using xhci_hcd |
| [107686.484376] xhci_hcd 0000:00:14.0: Setup ERROR: setup context command for slot 9. |
| [107686.484380] usb 1-4: hub failed to enable device, error -22 |
| [107686.637069] usb 1-4: reset full-speed USB device number 9 using xhci_hcd |
| [107686.637223] xhci_hcd 0000:00:14.0: Setup ERROR: setup context command for slot 9. |
| [107686.637228] usb 1-4: hub failed to enable device, error -22 |
| [107686.790059] usb 1-4: reset full-speed USB device number 9 using xhci_hcd |
| [107686.801407] usb 1-4: device firmware changed |
| [107686.801602] PM: resume of devices complete after 1096.555 msecs |
| [107686.801934] Restarting tasks ... done. |
| [107686.820073] usb 1-4: USB disconnect, device number 9 |
| [107686.820460] xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff88005e8bb800 |
| [107686.820464] xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff88005e8bb890 |
| [107686.820466] xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff88005e8bb848 |
| [107686.820469] xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff88007a54c288 |
| [107686.820471] xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff88007a54c240 |
| [107686.979662] usb 1-4: new full-speed USB device number 10 using xhci_hcd |
| [107687.145168] usb 1-4: string descriptor 0 malformed (err = -61), defaulting to 0x0409 |
| [107687.146994] usb 1-4: New USB device found, idVendor=0cf3, idProduct=311e |
| [107687.146998] usb 1-4: New USB device strings: Mfr=1, Product=2, SerialNumber=3 |
| [107687.186802] usb 1-4: USB disconnect, device number 10 |
| [107687.470840] usb 1-4: new full-speed USB device number 11 using xhci_hcd |
| [107687.636128] usb 1-4: string descriptor 0 malformed (err = -61), defaulting to 0x0409 |
| [107687.638285] usb 1-4: New USB device found, idVendor=0cf3, idProduct=311e |
| [107687.638290] usb 1-4: New USB device strings: Mfr=1, Product=2, SerialNumber=3 |
| [107693.123499] wlp1s0: authenticate with a0:f3:c1:db:e3:48 |
| [107693.136513] wlp1s0: send auth to a0:f3:c1:db:e3:48 (try 1/3) |
| [107693.138906] wlp1s0: authenticated |
| [107693.139819] wlp1s0: associate with a0:f3:c1:db:e3:48 (try 1/3) |
| [107693.145155] wlp1s0: RX AssocResp from a0:f3:c1:db:e3:48 (capab=0x431 status=0 aid=4) |
| [107693.145251] wlp1s0: associated |
| [132802.376987] wlp1s0: deauthenticating from a0:f3:c1:db:e3:48 by local choice (Reason: 3=DEAUTH_LEAVING) |
| [132802.384571] cfg80211: Calling CRDA to update world regulatory domain |
| [132802.391187] cfg80211: World regulatory domain updated: |
| [132802.391191] cfg80211: DFS Master region: unset |
| [132802.391193] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp), (dfs_cac_time) |
| [132802.391197] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (N/A, 2000 mBm), (N/A) |
| [132802.391199] cfg80211: (2457000 KHz - 2482000 KHz @ 40000 KHz), (N/A, 2000 mBm), (N/A) |
| [132802.391201] cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (N/A, 2000 mBm), (N/A) |
| [132802.391203] cfg80211: (5170000 KHz - 5250000 KHz @ 80000 KHz), (N/A, 2000 mBm), (N/A) |
| [132802.391205] cfg80211: (5735000 KHz - 5835000 KHz @ 80000 KHz), (N/A, 2000 mBm), (N/A) |
| [132802.391207] cfg80211: (57240000 KHz - 63720000 KHz @ 2160000 KHz), (N/A, 0 mBm), (N/A) |
| [132802.391266] cfg80211: Calling CRDA for country: IE |
| [132802.399391] cfg80211: Regulatory domain changed to country: IE |
| [132802.399396] cfg80211: DFS Master region: unset |
| [132802.399398] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp), (dfs_cac_time) |
| [132802.399401] cfg80211: (2402000 KHz - 2482000 KHz @ 40000 KHz), (N/A, 2000 mBm), (N/A) |
| [132802.399403] cfg80211: (5170000 KHz - 5250000 KHz @ 80000 KHz), (N/A, 2000 mBm), (N/A) |
| [132802.399406] cfg80211: (5250000 KHz - 5330000 KHz @ 80000 KHz), (N/A, 2000 mBm), (0 s) |
| [132802.399408] cfg80211: (5490000 KHz - 5710000 KHz @ 80000 KHz), (N/A, 2700 mBm), (0 s) |
| [132802.399410] cfg80211: (57240000 KHz - 65880000 KHz @ 2160000 KHz), (N/A, 4000 mBm), (N/A) |
| [132807.287800] PM: Syncing filesystems ... done. |
| [132807.306035] Freezing user space processes ... (elapsed 0.001 seconds) done. |
| [132807.307776] Freezing remaining freezable tasks ... (elapsed 0.001 seconds) done. |
| [132807.308976] Suspending console(s) (use no_console_suspend to debug) |
| [132807.411466] sd 0:0:0:0: [sda] Synchronizing SCSI cache |
| [132807.411507] sd 0:0:0:0: [sda] Stopping disk |
| [132808.175917] PM: suspend of devices complete after 866.927 msecs |
| [132808.186782] PM: late suspend of devices complete after 10.859 msecs |
| [132808.187675] xhci_hcd 0000:00:14.0: System wakeup enabled by ACPI |
| [132808.198247] PM: noirq suspend of devices complete after 11.462 msecs |
| [132808.198686] ACPI: Preparing to enter system sleep state S3 |
| [132808.199230] PM: Saving platform NVS memory |
| [132808.199232] Disabling non-boot CPUs ... |
| [132808.199290] intel_pstate CPU 1 exiting |
| [132808.199596] Broke affinity for irq 41 |
| [132808.199598] Broke affinity for irq 42 |
| [132808.200625] kvm: disabling virtualization on CPU1 |
| [132808.200642] smpboot: CPU 1 is now offline |
| [132808.202732] ACPI: Low-level resume complete |
| [132808.202792] PM: Restoring platform NVS memory |
| [132808.203194] Enabling non-boot CPUs ... |
| [132808.203239] x86: Booting SMP configuration: |
| [132808.203240] smpboot: Booting Node 0 Processor 1 APIC 0x2 |
| [132808.216669] CPU1 microcode updated early to revision 0x18, date = 2014-05-23 |
| [132808.218128] kvm: enabling virtualization on CPU1 |
| [132808.220534] CPU1 is up |
| [132808.222339] ACPI: Waking up from system sleep state S3 |
| [132808.233563] pci 0000:00:1d.0: Refused to change power state, currently in D3 |
| [132808.233798] xhci_hcd 0000:00:14.0: System wakeup disabled by ACPI |
| [132808.233982] PM: noirq resume of devices complete after 11.442 msecs |
| [132808.239701] PM: early resume of devices complete after 5.696 msecs |
| [132808.240066] snd_hda_intel 0000:00:03.0: irq 44 for MSI/MSI-X |
| [132808.240291] snd_hda_intel 0000:00:1b.0: irq 45 for MSI/MSI-X |
| [132808.240357] ath: phy0: ASPM enabled: 0x43 |
| [132808.240380] rtc_cmos 00:03: System wakeup disabled by ACPI |
| [132808.250682] sd 0:0:0:0: [sda] Starting disk |
| [132808.546891] usb 1-4: reset full-speed USB device number 11 using xhci_hcd |
| [132808.546961] xhci_hcd 0000:00:14.0: Setup ERROR: setup context command for slot 11. |
| [132808.546963] usb 1-4: hub failed to enable device, error -22 |
| [132808.555556] ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300) |
| [132808.556204] ata1.00: configured for UDMA/133 |
| [132808.699670] usb 1-4: reset full-speed USB device number 11 using xhci_hcd |
| [132808.699736] xhci_hcd 0000:00:14.0: Setup ERROR: setup context command for slot 11. |
| [132808.699740] usb 1-4: hub failed to enable device, error -22 |
| [132808.852691] usb 1-4: reset full-speed USB device number 11 using xhci_hcd |
| [132808.864023] usb 1-4: device firmware changed |
| [132809.016820] usb 1-3: reset high-speed USB device number 3 using xhci_hcd |
| [132809.016878] xhci_hcd 0000:00:14.0: Setup ERROR: setup context command for slot 2. |
| [132809.016882] usb 1-3: hub failed to enable device, error -22 |
| [132809.169585] usb 1-3: reset high-speed USB device number 3 using xhci_hcd |
| [132809.169645] xhci_hcd 0000:00:14.0: Setup ERROR: setup context command for slot 2. |
| [132809.169649] usb 1-3: hub failed to enable device, error -22 |
| [132809.322555] usb 1-3: reset high-speed USB device number 3 using xhci_hcd |
| [132809.382339] xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff880172e61f60 |
| [132809.384869] restoring control 00000000-0000-0000-0000-000000000101/10/5 |
| [132809.389424] PM: resume of devices complete after 1149.913 msecs |
| [132809.389773] Restarting tasks ... done. |
| [132809.409400] usb 1-4: USB disconnect, device number 11 |
| [132809.409885] xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff880142938e00 |
| [132809.409891] xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff880142938e90 |
| [132809.409894] xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff880142938e48 |
| [132809.409897] xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff88015bb40588 |
| [132809.409900] xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff88015bb40540 |
| [132809.564350] usb 1-4: new full-speed USB device number 12 using xhci_hcd |
| [132809.729661] usb 1-4: string descriptor 0 malformed (err = -61), defaulting to 0x0409 |
| [132809.731499] usb 1-4: New USB device found, idVendor=0cf3, idProduct=311e |
| [132809.731503] usb 1-4: New USB device strings: Mfr=1, Product=2, SerialNumber=3 |
| [132809.767675] usb 1-4: USB disconnect, device number 12 |
| [132810.053288] usb 1-4: new full-speed USB device number 13 using xhci_hcd |
| [132810.218942] usb 1-4: string descriptor 0 malformed (err = -61), defaulting to 0x0409 |
| [132810.221103] usb 1-4: New USB device found, idVendor=0cf3, idProduct=311e |
| [132810.221110] usb 1-4: New USB device strings: Mfr=1, Product=2, SerialNumber=3 |
| [132815.601852] wlp1s0: authenticate with a0:f3:c1:db:e3:48 |
| [132815.614670] wlp1s0: send auth to a0:f3:c1:db:e3:48 (try 1/3) |
| [132815.616754] wlp1s0: authenticated |
| [132815.617317] wlp1s0: associate with a0:f3:c1:db:e3:48 (try 1/3) |
| [132815.622587] wlp1s0: RX AssocResp from a0:f3:c1:db:e3:48 (capab=0x431 status=0 aid=5) |
| [132815.622671] wlp1s0: associated |
| [136611.594698] wlp1s0: deauthenticating from a0:f3:c1:db:e3:48 by local choice (Reason: 3=DEAUTH_LEAVING) |
| [136611.601540] cfg80211: Calling CRDA to update world regulatory domain |
| [136611.608380] cfg80211: World regulatory domain updated: |
| [136611.608386] cfg80211: DFS Master region: unset |
| [136611.608388] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp), (dfs_cac_time) |
| [136611.608391] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (N/A, 2000 mBm), (N/A) |
| [136611.608394] cfg80211: (2457000 KHz - 2482000 KHz @ 40000 KHz), (N/A, 2000 mBm), (N/A) |
| [136611.608396] cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (N/A, 2000 mBm), (N/A) |
| [136611.608398] cfg80211: (5170000 KHz - 5250000 KHz @ 80000 KHz), (N/A, 2000 mBm), (N/A) |
| [136611.608400] cfg80211: (5735000 KHz - 5835000 KHz @ 80000 KHz), (N/A, 2000 mBm), (N/A) |
| [136611.608402] cfg80211: (57240000 KHz - 63720000 KHz @ 2160000 KHz), (N/A, 0 mBm), (N/A) |
| [136611.609373] cfg80211: Calling CRDA for country: IE |
| [136611.618324] cfg80211: Regulatory domain changed to country: IE |
| [136611.618329] cfg80211: DFS Master region: unset |
| [136611.618331] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp), (dfs_cac_time) |
| [136611.618334] cfg80211: (2402000 KHz - 2482000 KHz @ 40000 KHz), (N/A, 2000 mBm), (N/A) |
| [136611.618337] cfg80211: (5170000 KHz - 5250000 KHz @ 80000 KHz), (N/A, 2000 mBm), (N/A) |
| [136611.618339] cfg80211: (5250000 KHz - 5330000 KHz @ 80000 KHz), (N/A, 2000 mBm), (0 s) |
| [136611.618341] cfg80211: (5490000 KHz - 5710000 KHz @ 80000 KHz), (N/A, 2700 mBm), (0 s) |
| [136611.618343] cfg80211: (57240000 KHz - 65880000 KHz @ 2160000 KHz), (N/A, 4000 mBm), (N/A) |
| [136613.830119] PM: Syncing filesystems ... done. |
| [136613.851947] Freezing user space processes ... (elapsed 0.269 seconds) done. |
| [136614.121888] Freezing remaining freezable tasks ... (elapsed 0.001 seconds) done. |
| [136614.123116] Suspending console(s) (use no_console_suspend to debug) |
| [136614.225674] sd 0:0:0:0: [sda] Synchronizing SCSI cache |
| [136614.227739] sd 0:0:0:0: [sda] Stopping disk |
| [136614.861476] PM: suspend of devices complete after 738.344 msecs |
| [136614.880481] PM: late suspend of devices complete after 18.989 msecs |
| [136614.881275] xhci_hcd 0000:00:14.0: System wakeup enabled by ACPI |
| [136614.892516] PM: noirq suspend of devices complete after 12.032 msecs |
| [136614.892845] ACPI: Preparing to enter system sleep state S3 |
| [136614.893272] PM: Saving platform NVS memory |
| [136614.893273] Disabling non-boot CPUs ... |
| [136614.893333] intel_pstate CPU 1 exiting |
| [136614.893601] Broke affinity for irq 41 |
| [136614.893603] Broke affinity for irq 42 |
| [136614.894622] kvm: disabling virtualization on CPU1 |
| [136614.894633] smpboot: CPU 1 is now offline |
| [136614.896472] ACPI: Low-level resume complete |
| [136614.896532] PM: Restoring platform NVS memory |
| [136614.896921] Enabling non-boot CPUs ... |
| [136614.896978] x86: Booting SMP configuration: |
| [136614.896979] smpboot: Booting Node 0 Processor 1 APIC 0x2 |
| [136614.910387] CPU1 microcode updated early to revision 0x18, date = 2014-05-23 |
| [136614.911846] kvm: enabling virtualization on CPU1 |
| [136614.914280] CPU1 is up |
| [136614.916083] ACPI: Waking up from system sleep state S3 |
| [136614.927067] pci 0000:00:1d.0: Refused to change power state, currently in D3 |
| [136614.928014] xhci_hcd 0000:00:14.0: System wakeup disabled by ACPI |
| [136614.928156] PM: noirq resume of devices complete after 11.930 msecs |
| [136614.932150] PM: early resume of devices complete after 3.968 msecs |
| [136614.933149] snd_hda_intel 0000:00:03.0: irq 44 for MSI/MSI-X |
| [136614.934466] snd_hda_intel 0000:00:1b.0: irq 45 for MSI/MSI-X |
| [136614.934540] rtc_cmos 00:03: System wakeup disabled by ACPI |
| [136614.935387] ath: phy0: ASPM enabled: 0x43 |
| [136614.945055] sd 0:0:0:0: [sda] Starting disk |
| [136615.242310] usb 1-3: reset high-speed USB device number 3 using xhci_hcd |
| [136615.242326] xhci_hcd 0000:00:14.0: Setup ERROR: setup context command for slot 2. |
| [136615.242328] usb 1-3: hub failed to enable device, error -22 |
| [136615.249993] ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300) |
| [136615.250819] ata1.00: configured for UDMA/133 |
| [136615.395199] usb 1-3: reset high-speed USB device number 3 using xhci_hcd |
| [136615.395221] xhci_hcd 0000:00:14.0: Setup ERROR: setup context command for slot 2. |
| [136615.395225] usb 1-3: hub failed to enable device, error -22 |
| [136615.548039] usb 1-3: reset high-speed USB device number 3 using xhci_hcd |
| [136615.608292] xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff880172e61f60 |
| [136615.611028] restoring control 00000000-0000-0000-0000-000000000101/10/5 |
| [136615.713266] usb 1-4: reset full-speed USB device number 13 using xhci_hcd |
| [136615.713288] xhci_hcd 0000:00:14.0: Setup ERROR: setup context command for slot 13. |
| [136615.713291] usb 1-4: hub failed to enable device, error -22 |
| [136615.865985] usb 1-4: reset full-speed USB device number 13 using xhci_hcd |
| [136615.866051] xhci_hcd 0000:00:14.0: Setup ERROR: setup context command for slot 13. |
| [136615.866056] usb 1-4: hub failed to enable device, error -22 |
| [136616.019107] usb 1-4: reset full-speed USB device number 13 using xhci_hcd |
| [136616.030332] usb 1-4: device firmware changed |
| [136616.030561] PM: resume of devices complete after 1098.592 msecs |
| [136616.030936] Restarting tasks ... done. |
| [136616.048802] usb 1-4: USB disconnect, device number 13 |
| [136616.049213] xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff88007b09be00 |
| [136616.049217] xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff88007b09be90 |
| [136616.049220] xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff88007b09be48 |
| [136616.049222] xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff88005ead6708 |
| [136616.049224] xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff88005ead66c0 |
| [136616.204822] usb 1-4: new full-speed USB device number 14 using xhci_hcd |
| [136616.370383] usb 1-4: string descriptor 0 malformed (err = -61), defaulting to 0x0409 |
| [136616.372300] usb 1-4: New USB device found, idVendor=0cf3, idProduct=311e |
| [136616.372304] usb 1-4: New USB device strings: Mfr=1, Product=2, SerialNumber=3 |
| [136616.409761] usb 1-4: USB disconnect, device number 14 |
| [136616.693832] usb 1-4: new full-speed USB device number 15 using xhci_hcd |
| [136616.859444] usb 1-4: string descriptor 0 malformed (err = -61), defaulting to 0x0409 |
| [136616.861402] usb 1-4: New USB device found, idVendor=0cf3, idProduct=311e |
| [136616.861408] usb 1-4: New USB device strings: Mfr=1, Product=2, SerialNumber=3 |
| [136622.205199] wlp1s0: authenticate with a0:f3:c1:db:e3:48 |
| [136622.215135] wlp1s0: send auth to a0:f3:c1:db:e3:48 (try 1/3) |
| [136622.217457] wlp1s0: authenticated |
| [136622.217788] wlp1s0: associate with a0:f3:c1:db:e3:48 (try 1/3) |
| [136622.223037] wlp1s0: RX AssocResp from a0:f3:c1:db:e3:48 (capab=0x431 status=0 aid=5) |
| [136622.223123] wlp1s0: associated |
| [136755.454465] Adjusting tsc more than 11% (14113711 vs 13332733) |
| [139440.918367] cfg80211: Calling CRDA to update world regulatory domain |
| [139440.921313] cfg80211: World regulatory domain updated: |
| [139440.921318] cfg80211: DFS Master region: unset |
| [139440.921319] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp), (dfs_cac_time) |
| [139440.921323] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (N/A, 2000 mBm), (N/A) |
| [139440.921325] cfg80211: (2457000 KHz - 2482000 KHz @ 40000 KHz), (N/A, 2000 mBm), (N/A) |
| [139440.921327] cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (N/A, 2000 mBm), (N/A) |
| [139440.921329] cfg80211: (5170000 KHz - 5250000 KHz @ 80000 KHz), (N/A, 2000 mBm), (N/A) |
| [139440.921331] cfg80211: (5735000 KHz - 5835000 KHz @ 80000 KHz), (N/A, 2000 mBm), (N/A) |
| [139440.921333] cfg80211: (57240000 KHz - 63720000 KHz @ 2160000 KHz), (N/A, 0 mBm), (N/A) |
| [139440.921353] cfg80211: Calling CRDA for country: IE |
| [139440.938698] cfg80211: Regulatory domain changed to country: IE |
| [139440.938703] cfg80211: DFS Master region: unset |
| [139440.938705] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp), (dfs_cac_time) |
| [139440.938708] cfg80211: (2402000 KHz - 2482000 KHz @ 40000 KHz), (N/A, 2000 mBm), (N/A) |
| [139440.938711] cfg80211: (5170000 KHz - 5250000 KHz @ 80000 KHz), (N/A, 2000 mBm), (N/A) |
| [139440.938713] cfg80211: (5250000 KHz - 5330000 KHz @ 80000 KHz), (N/A, 2000 mBm), (0 s) |
| [139440.938715] cfg80211: (5490000 KHz - 5710000 KHz @ 80000 KHz), (N/A, 2700 mBm), (0 s) |
| [139440.938717] cfg80211: (57240000 KHz - 65880000 KHz @ 2160000 KHz), (N/A, 4000 mBm), (N/A) |
| [139488.372384] wlp1s0: authenticate with a0:f3:c1:db:e3:48 |
| [139488.385232] wlp1s0: send auth to a0:f3:c1:db:e3:48 (try 1/3) |
| [139488.387345] wlp1s0: authenticated |
| [139488.387705] wlp1s0: associate with a0:f3:c1:db:e3:48 (try 1/3) |
| [139488.391491] wlp1s0: RX AssocResp from a0:f3:c1:db:e3:48 (capab=0x431 status=0 aid=4) |
| [139488.391583] wlp1s0: associated |
| [160734.976774] Chrome_FileThre[24004]: segfault at ffffffffffffffe8 ip 00007ffe69f6dc58 sp 00007ffe489ec860 error 5 in chrome (deleted)[7ffe6907d000+4ffd000] |
| [164902.522562] wlp1s0: deauthenticating from a0:f3:c1:db:e3:48 by local choice (Reason: 3=DEAUTH_LEAVING) |
| [164902.538109] cfg80211: Calling CRDA to update world regulatory domain |
| [164902.548423] cfg80211: World regulatory domain updated: |
| [164902.548428] cfg80211: DFS Master region: unset |
| [164902.548430] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp), (dfs_cac_time) |
| [164902.548434] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (N/A, 2000 mBm), (N/A) |
| [164902.548436] cfg80211: (2457000 KHz - 2482000 KHz @ 40000 KHz), (N/A, 2000 mBm), (N/A) |
| [164902.548438] cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (N/A, 2000 mBm), (N/A) |
| [164902.548440] cfg80211: (5170000 KHz - 5250000 KHz @ 80000 KHz), (N/A, 2000 mBm), (N/A) |
| [164902.548442] cfg80211: (5735000 KHz - 5835000 KHz @ 80000 KHz), (N/A, 2000 mBm), (N/A) |
| [164902.548444] cfg80211: (57240000 KHz - 63720000 KHz @ 2160000 KHz), (N/A, 0 mBm), (N/A) |
| [164902.548562] cfg80211: Calling CRDA for country: IE |
| [164902.562449] cfg80211: Regulatory domain changed to country: IE |
| [164902.562454] cfg80211: DFS Master region: unset |
| [164902.562456] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp), (dfs_cac_time) |
| [164902.562460] cfg80211: (2402000 KHz - 2482000 KHz @ 40000 KHz), (N/A, 2000 mBm), (N/A) |
| [164902.562462] cfg80211: (5170000 KHz - 5250000 KHz @ 80000 KHz), (N/A, 2000 mBm), (N/A) |
| [164902.562464] cfg80211: (5250000 KHz - 5330000 KHz @ 80000 KHz), (N/A, 2000 mBm), (0 s) |
| [164902.562467] cfg80211: (5490000 KHz - 5710000 KHz @ 80000 KHz), (N/A, 2700 mBm), (0 s) |
| [164902.562469] cfg80211: (57240000 KHz - 65880000 KHz @ 2160000 KHz), (N/A, 4000 mBm), (N/A) |
| [164907.424009] PM: Syncing filesystems ... done. |
| [164907.445858] Freezing user space processes ... (elapsed 0.001 seconds) done. |
| [164907.447755] Freezing remaining freezable tasks ... (elapsed 0.001 seconds) done. |
| [164907.449039] Suspending console(s) (use no_console_suspend to debug) |
| [164907.551078] sd 0:0:0:0: [sda] Synchronizing SCSI cache |
| [164907.551160] sd 0:0:0:0: [sda] Stopping disk |
| [164908.176011] PM: suspend of devices complete after 726.928 msecs |
| [164908.195049] PM: late suspend of devices complete after 19.032 msecs |
| [164908.195782] xhci_hcd 0000:00:14.0: System wakeup enabled by ACPI |
| [164908.206347] PM: noirq suspend of devices complete after 11.296 msecs |
| [164908.206676] ACPI: Preparing to enter system sleep state S3 |
| [164908.207098] PM: Saving platform NVS memory |
| [164908.207099] Disabling non-boot CPUs ... |
| [164908.207161] intel_pstate CPU 1 exiting |
| [164908.207454] Broke affinity for irq 21 |
| [164908.207467] Broke affinity for irq 41 |
| [164908.207468] Broke affinity for irq 42 |
| [164908.208489] kvm: disabling virtualization on CPU1 |
| [164908.208501] smpboot: CPU 1 is now offline |
| [164908.210439] ACPI: Low-level resume complete |
| [164908.210500] PM: Restoring platform NVS memory |
| [164908.210903] Enabling non-boot CPUs ... |
| [164908.210947] x86: Booting SMP configuration: |
| [164908.210948] smpboot: Booting Node 0 Processor 1 APIC 0x2 |
| [164908.224362] CPU1 microcode updated early to revision 0x18, date = 2014-05-23 |
| [164908.225821] kvm: enabling virtualization on CPU1 |
| [164908.228249] CPU1 is up |
| [164908.230051] ACPI: Waking up from system sleep state S3 |
| [164908.240697] pci 0000:00:1d.0: Refused to change power state, currently in D3 |
| [164908.241690] xhci_hcd 0000:00:14.0: System wakeup disabled by ACPI |
| [164908.241850] PM: noirq resume of devices complete after 11.657 msecs |
| [164908.247760] PM: early resume of devices complete after 5.885 msecs |
| [164908.248044] snd_hda_intel 0000:00:03.0: irq 44 for MSI/MSI-X |
| [164908.248417] snd_hda_intel 0000:00:1b.0: irq 45 for MSI/MSI-X |
| [164908.248485] rtc_cmos 00:03: System wakeup disabled by ACPI |
| [164908.248861] ath: phy0: ASPM enabled: 0x43 |
| [164908.258676] sd 0:0:0:0: [sda] Starting disk |
| [164908.555849] usb 1-3: reset high-speed USB device number 3 using xhci_hcd |
| [164908.555863] xhci_hcd 0000:00:14.0: Setup ERROR: setup context command for slot 2. |
| [164908.555865] usb 1-3: hub failed to enable device, error -22 |
| [164908.563552] ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300) |
| [164908.564094] ata1.00: configured for UDMA/133 |
| [164908.708723] usb 1-3: reset high-speed USB device number 3 using xhci_hcd |
| [164908.708747] xhci_hcd 0000:00:14.0: Setup ERROR: setup context command for slot 2. |
| [164908.708750] usb 1-3: hub failed to enable device, error -22 |
| [164908.861690] usb 1-3: reset high-speed USB device number 3 using xhci_hcd |
| [164908.921299] xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff880172e61f60 |
| [164908.923986] restoring control 00000000-0000-0000-0000-000000000101/10/5 |
| [164909.025669] usb 1-4: reset full-speed USB device number 15 using xhci_hcd |
| [164909.025690] xhci_hcd 0000:00:14.0: Setup ERROR: setup context command for slot 15. |
| [164909.025693] usb 1-4: hub failed to enable device, error -22 |
| [164909.178515] usb 1-4: reset full-speed USB device number 15 using xhci_hcd |
| [164909.178531] xhci_hcd 0000:00:14.0: Setup ERROR: setup context command for slot 15. |
| [164909.178534] usb 1-4: hub failed to enable device, error -22 |
| [164909.331512] usb 1-4: reset full-speed USB device number 15 using xhci_hcd |
| [164909.342784] usb 1-4: device firmware changed |
| [164909.343028] PM: resume of devices complete after 1095.452 msecs |
| [164909.343451] Restarting tasks ... done. |
| [164909.359417] usb 1-4: USB disconnect, device number 15 |
| [164909.361237] xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff880158322d00 |
| [164909.361243] xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff880158322d90 |
| [164909.361246] xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff880158322d48 |
| [164909.361249] xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff880078023f48 |
| [164909.361252] xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff880078023f00 |
| [164909.514374] usb 1-4: new full-speed USB device number 16 using xhci_hcd |
| [164909.679819] usb 1-4: string descriptor 0 malformed (err = -61), defaulting to 0x0409 |
| [164909.681920] usb 1-4: New USB device found, idVendor=0cf3, idProduct=311e |
| [164909.681924] usb 1-4: New USB device strings: Mfr=1, Product=2, SerialNumber=3 |
| [164909.718724] usb 1-4: USB disconnect, device number 16 |
| [164910.003395] usb 1-4: new full-speed USB device number 17 using xhci_hcd |
| [164910.169017] usb 1-4: string descriptor 0 malformed (err = -61), defaulting to 0x0409 |
| [164910.170861] usb 1-4: New USB device found, idVendor=0cf3, idProduct=311e |
| [164910.170865] usb 1-4: New USB device strings: Mfr=1, Product=2, SerialNumber=3 |
| [164915.551872] wlp1s0: authenticate with a0:f3:c1:db:e3:48 |
| [164915.564852] wlp1s0: send auth to a0:f3:c1:db:e3:48 (try 1/3) |
| [164915.566976] wlp1s0: authenticated |
| [164915.567314] wlp1s0: associate with a0:f3:c1:db:e3:48 (try 1/3) |
| [164915.572785] wlp1s0: RX AssocResp from a0:f3:c1:db:e3:48 (capab=0x431 status=0 aid=4) |
| [164915.572871] wlp1s0: associated |
| [183156.873287] cfg80211: Calling CRDA to update world regulatory domain |
| [183156.876979] cfg80211: World regulatory domain updated: |
| [183156.876985] cfg80211: DFS Master region: unset |
| [183156.876987] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp), (dfs_cac_time) |
| [183156.876991] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (N/A, 2000 mBm), (N/A) |
| [183156.876994] cfg80211: (2457000 KHz - 2482000 KHz @ 40000 KHz), (N/A, 2000 mBm), (N/A) |
| [183156.876997] cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (N/A, 2000 mBm), (N/A) |
| [183156.876999] cfg80211: (5170000 KHz - 5250000 KHz @ 80000 KHz), (N/A, 2000 mBm), (N/A) |
| [183156.877002] cfg80211: (5735000 KHz - 5835000 KHz @ 80000 KHz), (N/A, 2000 mBm), (N/A) |
| [183156.877005] cfg80211: (57240000 KHz - 63720000 KHz @ 2160000 KHz), (N/A, 0 mBm), (N/A) |
| [183156.877029] cfg80211: Calling CRDA for country: IE |
| [183156.890973] cfg80211: Regulatory domain changed to country: IE |
| [183156.890978] cfg80211: DFS Master region: unset |
| [183156.890980] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp), (dfs_cac_time) |
| [183156.890984] cfg80211: (2402000 KHz - 2482000 KHz @ 40000 KHz), (N/A, 2000 mBm), (N/A) |
| [183156.890987] cfg80211: (5170000 KHz - 5250000 KHz @ 80000 KHz), (N/A, 2000 mBm), (N/A) |
| [183156.890989] cfg80211: (5250000 KHz - 5330000 KHz @ 80000 KHz), (N/A, 2000 mBm), (0 s) |
| [183156.890991] cfg80211: (5490000 KHz - 5710000 KHz @ 80000 KHz), (N/A, 2700 mBm), (0 s) |
| [183156.890994] cfg80211: (57240000 KHz - 65880000 KHz @ 2160000 KHz), (N/A, 4000 mBm), (N/A) |
| [183204.293824] wlp1s0: authenticate with a0:f3:c1:db:e3:48 |
| [183204.306609] wlp1s0: send auth to a0:f3:c1:db:e3:48 (try 1/3) |
| [183204.308690] wlp1s0: authenticated |
| [183204.309848] wlp1s0: associate with a0:f3:c1:db:e3:48 (try 1/3) |
| [183204.315033] wlp1s0: RX AssocResp from a0:f3:c1:db:e3:48 (capab=0x431 status=0 aid=3) |
| [183204.315139] wlp1s0: associated |
| [186621.050597] wlp1s0: deauthenticating from a0:f3:c1:db:e3:48 by local choice (Reason: 3=DEAUTH_LEAVING) |
| [186621.062614] cfg80211: Calling CRDA to update world regulatory domain |
| [186621.067886] cfg80211: World regulatory domain updated: |
| [186621.067891] cfg80211: DFS Master region: unset |
| [186621.067893] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp), (dfs_cac_time) |
| [186621.067897] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (N/A, 2000 mBm), (N/A) |
| [186621.067899] cfg80211: (2457000 KHz - 2482000 KHz @ 40000 KHz), (N/A, 2000 mBm), (N/A) |
| [186621.067901] cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (N/A, 2000 mBm), (N/A) |
| [186621.067903] cfg80211: (5170000 KHz - 5250000 KHz @ 80000 KHz), (N/A, 2000 mBm), (N/A) |
| [186621.067905] cfg80211: (5735000 KHz - 5835000 KHz @ 80000 KHz), (N/A, 2000 mBm), (N/A) |
| [186621.067907] cfg80211: (57240000 KHz - 63720000 KHz @ 2160000 KHz), (N/A, 0 mBm), (N/A) |
| [186621.067930] cfg80211: Calling CRDA for country: IE |
| [186621.078016] cfg80211: Regulatory domain changed to country: IE |
| [186621.078022] cfg80211: DFS Master region: unset |
| [186621.078023] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp), (dfs_cac_time) |
| [186621.078027] cfg80211: (2402000 KHz - 2482000 KHz @ 40000 KHz), (N/A, 2000 mBm), (N/A) |
| [186621.078029] cfg80211: (5170000 KHz - 5250000 KHz @ 80000 KHz), (N/A, 2000 mBm), (N/A) |
| [186621.078031] cfg80211: (5250000 KHz - 5330000 KHz @ 80000 KHz), (N/A, 2000 mBm), (0 s) |
| [186621.078033] cfg80211: (5490000 KHz - 5710000 KHz @ 80000 KHz), (N/A, 2700 mBm), (0 s) |
| [186621.078035] cfg80211: (57240000 KHz - 65880000 KHz @ 2160000 KHz), (N/A, 4000 mBm), (N/A) |
| [186622.333778] PM: Syncing filesystems ... done. |
| [186622.378942] Freezing user space processes ... (elapsed 0.001 seconds) done. |
| [186622.380829] Freezing remaining freezable tasks ... (elapsed 0.001 seconds) done. |
| [186622.382012] Suspending console(s) (use no_console_suspend to debug) |
| [186622.484908] sd 0:0:0:0: [sda] Synchronizing SCSI cache |
| [186622.485019] sd 0:0:0:0: [sda] Stopping disk |
| [186623.066095] PM: suspend of devices complete after 684.062 msecs |
| [186623.083181] PM: late suspend of devices complete after 17.069 msecs |
| [186623.084054] xhci_hcd 0000:00:14.0: System wakeup enabled by ACPI |
| [186623.095261] PM: noirq suspend of devices complete after 12.077 msecs |
| [186623.095656] ACPI: Preparing to enter system sleep state S3 |
| [186623.096155] PM: Saving platform NVS memory |
| [186623.096157] Disabling non-boot CPUs ... |
| [186623.096229] intel_pstate CPU 1 exiting |
| [186623.097554] kvm: disabling virtualization on CPU1 |
| [186623.097567] smpboot: CPU 1 is now offline |
| [186623.099526] ACPI: Low-level resume complete |
| [186623.099586] PM: Restoring platform NVS memory |
| [186623.099986] Enabling non-boot CPUs ... |
| [186623.100032] x86: Booting SMP configuration: |
| [186623.100033] smpboot: Booting Node 0 Processor 1 APIC 0x2 |
| [186623.113455] CPU1 microcode updated early to revision 0x18, date = 2014-05-23 |
| [186623.114914] kvm: enabling virtualization on CPU1 |
| [186623.117316] CPU1 is up |
| [186623.119122] ACPI: Waking up from system sleep state S3 |
| [186623.129797] pci 0000:00:1d.0: Refused to change power state, currently in D3 |
| [186623.130807] xhci_hcd 0000:00:14.0: System wakeup disabled by ACPI |
| [186623.130933] PM: noirq resume of devices complete after 11.607 msecs |
| [186623.136881] PM: early resume of devices complete after 5.923 msecs |
| [186623.137284] snd_hda_intel 0000:00:03.0: irq 44 for MSI/MSI-X |
| [186623.137547] snd_hda_intel 0000:00:1b.0: irq 45 for MSI/MSI-X |
| [186623.137614] rtc_cmos 00:03: System wakeup disabled by ACPI |
| [186623.137988] ath: phy0: ASPM enabled: 0x43 |
| [186623.147772] sd 0:0:0:0: [sda] Starting disk |
| [186623.444982] usb 1-3: reset high-speed USB device number 3 using xhci_hcd |
| [186623.445035] xhci_hcd 0000:00:14.0: Setup ERROR: setup context command for slot 2. |
| [186623.445048] usb 1-3: hub failed to enable device, error -22 |
| [186623.452679] ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300) |
| [186623.453227] ata1.00: configured for UDMA/133 |
| [186623.597809] usb 1-3: reset high-speed USB device number 3 using xhci_hcd |
| [186623.597874] xhci_hcd 0000:00:14.0: Setup ERROR: setup context command for slot 2. |
| [186623.597879] usb 1-3: hub failed to enable device, error -22 |
| [186623.750770] usb 1-3: reset high-speed USB device number 3 using xhci_hcd |
| [186623.811014] xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff880172e61f60 |
| [186623.813623] restoring control 00000000-0000-0000-0000-000000000101/10/5 |
| [186623.915975] usb 1-4: reset full-speed USB device number 17 using xhci_hcd |
| [186623.916043] xhci_hcd 0000:00:14.0: Setup ERROR: setup context command for slot 17. |
| [186623.916047] usb 1-4: hub failed to enable device, error -22 |
| [186624.068889] usb 1-4: reset full-speed USB device number 17 using xhci_hcd |
| [186624.068912] xhci_hcd 0000:00:14.0: Setup ERROR: setup context command for slot 17. |
| [186624.068915] usb 1-4: hub failed to enable device, error -22 |
| [186624.221698] usb 1-4: reset full-speed USB device number 17 using xhci_hcd |
| [186624.233089] usb 1-4: device firmware changed |
| [186624.233332] PM: resume of devices complete after 1096.632 msecs |
| [186624.233705] Restarting tasks ... done. |
| [186624.249714] usb 1-4: USB disconnect, device number 17 |
| [186624.250512] xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff88007b361000 |
| [186624.250518] xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff88007b361090 |
| [186624.250521] xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff88007b361048 |
| [186624.250524] xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff88015820bc48 |
| [186624.250526] xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff88015820bc00 |
| [186624.404528] usb 1-4: new full-speed USB device number 18 using xhci_hcd |
| [186624.569795] usb 1-4: string descriptor 0 malformed (err = -61), defaulting to 0x0409 |
| [186624.571596] usb 1-4: New USB device found, idVendor=0cf3, idProduct=311e |
| [186624.571599] usb 1-4: New USB device strings: Mfr=1, Product=2, SerialNumber=3 |
| [186624.607604] usb 1-4: USB disconnect, device number 18 |
| [186624.891564] usb 1-4: new full-speed USB device number 19 using xhci_hcd |
| [186625.057139] usb 1-4: string descriptor 0 malformed (err = -61), defaulting to 0x0409 |
| [186625.058984] usb 1-4: New USB device found, idVendor=0cf3, idProduct=311e |
| [186625.058988] usb 1-4: New USB device strings: Mfr=1, Product=2, SerialNumber=3 |
| [186630.397658] wlp1s0: authenticate with a0:f3:c1:db:e3:48 |
| [186630.410167] wlp1s0: send auth to a0:f3:c1:db:e3:48 (try 1/3) |
| [186630.415079] wlp1s0: authenticated |
| [186630.415555] wlp1s0: associate with a0:f3:c1:db:e3:48 (try 1/3) |
| [186630.419272] wlp1s0: RX AssocResp from a0:f3:c1:db:e3:48 (capab=0x431 status=0 aid=5) |
| [186630.419377] wlp1s0: associated |
| [194334.695359] usb 1-2: new high-speed USB device number 20 using xhci_hcd |
| [194334.860100] usb 1-2: New USB device found, idVendor=0781, idProduct=5571 |
| [194334.860105] usb 1-2: New USB device strings: Mfr=1, Product=2, SerialNumber=3 |
| [194334.860108] usb 1-2: Product: TDK USB Flash Drive |
| [194334.860110] usb 1-2: Manufacturer: |
| [194334.860112] usb 1-2: SerialNumber: 4C532000051023105214 |
| [194334.862174] usb-storage 1-2:1.0: USB Mass Storage device detected |
| [194334.862765] scsi host5: usb-storage 1-2:1.0 |
| [194335.863919] scsi 5:0:0:0: Direct-Access TDK 1.20 PQ: 0 ANSI: 5 |
| [194335.864260] sd 5:0:0:0: Attached scsi generic sg2 type 0 |
| [194335.873004] sd 5:0:0:0: [sdc] 31266816 512-byte logical blocks: (16.0 GB/14.9 GiB) |
| [194335.874238] sd 5:0:0:0: [sdc] Write Protect is off |
| [194335.874243] sd 5:0:0:0: [sdc] Mode Sense: 43 00 00 00 |
| [194335.874561] sd 5:0:0:0: [sdc] Write cache: disabled, read cache: enabled, doesn't support DPO or FUA |
| [194335.881672] sdc: sdc1 |
| [194335.883092] sd 5:0:0:0: [sdc] Attached SCSI removable disk |
| [194336.254710] FAT-fs (sdc1): Volume was not properly unmounted. Some data may be corrupt. Please run fsck. |
| [194380.189826] sdc: detected capacity change from 16008609792 to 0 |
| [194383.209539] usb 1-2: USB disconnect, device number 20 |
| [196266.584135] loop: module loaded |
| [196288.424036] EXT4-fs (dm-3): mounted filesystem without journal. Opts: (null) |
| [198714.839400] usb 1-8: new full-speed USB device number 21 using xhci_hcd |
| [198715.005866] usb 1-8: New USB device found, idVendor=0483, idProduct=dada |
| [198715.005874] usb 1-8: New USB device strings: Mfr=1, Product=2, SerialNumber=3 |
| [198715.005879] usb 1-8: Product: SF100-ISP |
| [198715.005883] usb 1-8: Manufacturer: DediProg |
| [198715.005886] usb 1-8: SerialNumber: 20060104-0015 |
| [198894.163577] device vnet0 entered promiscuous mode |
| [198894.172545] virbr0: port 2(vnet0) entered listening state |
| [198894.172557] virbr0: port 2(vnet0) entered listening state |
| [198894.972361] usb 1-8: reset full-speed USB device number 21 using xhci_hcd |
| [198894.972376] xhci_hcd 0000:00:14.0: Setup ERROR: setup context command for slot 21. |
| [198894.972380] usb 1-8: hub failed to enable device, error -22 |
| [198895.125211] usb 1-8: reset full-speed USB device number 21 using xhci_hcd |
| [198895.125261] xhci_hcd 0000:00:14.0: Setup ERROR: setup context command for slot 21. |
| [198895.125268] usb 1-8: hub failed to enable device, error -22 |
| [198895.278093] usb 1-8: reset full-speed USB device number 21 using xhci_hcd |
| [198895.291037] xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff8801727ea888 |
| [198895.291043] xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff8801727ea840 |
| [198896.173870] virbr0: port 2(vnet0) entered learning state |
| [198898.177522] virbr0: topology change detected, propagating |
| [198898.177533] virbr0: port 2(vnet0) entered forwarding state |
| [198918.960302] usb 1-8: reset full-speed USB device number 21 using xhci_hcd |
| [198918.960327] xhci_hcd 0000:00:14.0: Setup ERROR: setup context command for slot 21. |
| [198918.960334] usb 1-8: hub failed to enable device, error -22 |
| [198919.112990] usb 1-8: reset full-speed USB device number 21 using xhci_hcd |
| [198919.113010] xhci_hcd 0000:00:14.0: Setup ERROR: setup context command for slot 21. |
| [198919.113014] usb 1-8: hub failed to enable device, error -22 |
| [198919.265948] usb 1-8: reset full-speed USB device number 21 using xhci_hcd |
| [198919.278678] xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff8801727ea888 |
| [198919.278684] xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff8801727ea840 |
| [198919.463211] usb 1-8: reset full-speed USB device number 21 using xhci_hcd |
| [198919.463232] xhci_hcd 0000:00:14.0: Setup ERROR: setup context command for slot 21. |
| [198919.463237] usb 1-8: hub failed to enable device, error -22 |
| [198919.615999] usb 1-8: reset full-speed USB device number 21 using xhci_hcd |
| [198919.616026] xhci_hcd 0000:00:14.0: Setup ERROR: setup context command for slot 21. |
| [198919.616030] usb 1-8: hub failed to enable device, error -22 |
| [198919.768951] usb 1-8: reset full-speed USB device number 21 using xhci_hcd |
| [198919.781105] xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff8801727ea888 |
| [198919.781111] xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff8801727ea840 |
| [203281.434920] wlp1s0: deauthenticating from a0:f3:c1:db:e3:48 by local choice (Reason: 3=DEAUTH_LEAVING) |
| [203281.441673] cfg80211: Calling CRDA to update world regulatory domain |
| [203281.462164] cfg80211: World regulatory domain updated: |
| [203281.462170] cfg80211: DFS Master region: unset |
| [203281.462172] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp), (dfs_cac_time) |
| [203281.462176] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (N/A, 2000 mBm), (N/A) |
| [203281.462178] cfg80211: (2457000 KHz - 2482000 KHz @ 40000 KHz), (N/A, 2000 mBm), (N/A) |
| [203281.462180] cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (N/A, 2000 mBm), (N/A) |
| [203281.462182] cfg80211: (5170000 KHz - 5250000 KHz @ 80000 KHz), (N/A, 2000 mBm), (N/A) |
| [203281.462184] cfg80211: (5735000 KHz - 5835000 KHz @ 80000 KHz), (N/A, 2000 mBm), (N/A) |
| [203281.462186] cfg80211: (57240000 KHz - 63720000 KHz @ 2160000 KHz), (N/A, 0 mBm), (N/A) |
| [203281.462235] cfg80211: Calling CRDA for country: IE |
| [203281.482542] cfg80211: Regulatory domain changed to country: IE |
| [203281.482547] cfg80211: DFS Master region: unset |
| [203281.482549] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp), (dfs_cac_time) |
| [203281.482553] cfg80211: (2402000 KHz - 2482000 KHz @ 40000 KHz), (N/A, 2000 mBm), (N/A) |
| [203281.482555] cfg80211: (5170000 KHz - 5250000 KHz @ 80000 KHz), (N/A, 2000 mBm), (N/A) |
| [203281.482557] cfg80211: (5250000 KHz - 5330000 KHz @ 80000 KHz), (N/A, 2000 mBm), (0 s) |
| [203281.482559] cfg80211: (5490000 KHz - 5710000 KHz @ 80000 KHz), (N/A, 2700 mBm), (0 s) |
| [203281.482562] cfg80211: (57240000 KHz - 65880000 KHz @ 2160000 KHz), (N/A, 4000 mBm), (N/A) |
| [203284.181983] PM: Syncing filesystems ... done. |
| [203284.205562] Freezing user space processes ... (elapsed 0.267 seconds) done. |
| [203284.473149] Freezing remaining freezable tasks ... (elapsed 0.001 seconds) done. |
| [203284.474422] Suspending console(s) (use no_console_suspend to debug) |
| [203284.576255] sd 0:0:0:0: [sda] Synchronizing SCSI cache |
| [203284.578326] sd 0:0:0:0: [sda] Stopping disk |
| [203285.114460] PM: suspend of devices complete after 639.998 msecs |
| [203285.125464] PM: late suspend of devices complete after 10.996 msecs |
| [203285.126463] xhci_hcd 0000:00:14.0: System wakeup enabled by ACPI |
| [203285.137799] PM: noirq suspend of devices complete after 12.331 msecs |
| [203285.138238] ACPI: Preparing to enter system sleep state S3 |
| [203285.138776] PM: Saving platform NVS memory |
| [203285.138778] Disabling non-boot CPUs ... |
| [203285.138854] intel_pstate CPU 1 exiting |
| [203285.139177] Broke affinity for irq 21 |
| [203285.139191] Broke affinity for irq 42 |
| [203285.140216] kvm: disabling virtualization on CPU1 |
| [203285.140232] smpboot: CPU 1 is now offline |
| [203285.142371] ACPI: Low-level resume complete |
| [203285.142432] PM: Restoring platform NVS memory |
| [203285.142820] Enabling non-boot CPUs ... |
| [203285.142866] x86: Booting SMP configuration: |
| [203285.142867] smpboot: Booting Node 0 Processor 1 APIC 0x2 |
| [203285.156297] CPU1 microcode updated early to revision 0x18, date = 2014-05-23 |
| [203285.157756] kvm: enabling virtualization on CPU1 |
| [203285.160186] CPU1 is up |
| [203285.162000] ACPI: Waking up from system sleep state S3 |
| [203285.173121] pci 0000:00:1d.0: Refused to change power state, currently in D3 |
| [203285.174155] xhci_hcd 0000:00:14.0: System wakeup disabled by ACPI |
| [203285.174303] PM: noirq resume of devices complete after 12.152 msecs |
| [203285.180301] PM: early resume of devices complete after 5.972 msecs |
| [203285.180699] snd_hda_intel 0000:00:03.0: irq 44 for MSI/MSI-X |
| [203285.180952] snd_hda_intel 0000:00:1b.0: irq 45 for MSI/MSI-X |
| [203285.181015] rtc_cmos 00:03: System wakeup disabled by ACPI |
| [203285.181441] ath: phy0: ASPM enabled: 0x43 |
| [203285.191198] sd 0:0:0:0: [sda] Starting disk |
| [203285.496106] ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300) |
| [203285.496810] ata1.00: configured for UDMA/133 |
| [203285.530370] usb 1-3: reset high-speed USB device number 3 using xhci_hcd |
| [203285.530395] xhci_hcd 0000:00:14.0: Setup ERROR: setup context command for slot 2. |
| [203285.530399] usb 1-3: hub failed to enable device, error -22 |
| [203285.683200] usb 1-3: reset high-speed USB device number 3 using xhci_hcd |
| [203285.683354] xhci_hcd 0000:00:14.0: Setup ERROR: setup context command for slot 2. |
| [203285.683358] usb 1-3: hub failed to enable device, error -22 |
| [203285.836211] usb 1-3: reset high-speed USB device number 3 using xhci_hcd |
| [203285.896452] xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff880172e61f60 |
| [203285.899028] restoring control 00000000-0000-0000-0000-000000000101/10/5 |
| [203286.000402] usb 1-4: reset full-speed USB device number 19 using xhci_hcd |
| [203286.000427] xhci_hcd 0000:00:14.0: Setup ERROR: setup context command for slot 19. |
| [203286.000431] usb 1-4: hub failed to enable device, error -22 |
| [203286.153156] usb 1-4: reset full-speed USB device number 19 using xhci_hcd |
| [203286.153177] xhci_hcd 0000:00:14.0: Setup ERROR: setup context command for slot 19. |
| [203286.153180] usb 1-4: hub failed to enable device, error -22 |
| [203286.306102] usb 1-4: reset full-speed USB device number 19 using xhci_hcd |
| [203286.317497] usb 1-4: device firmware changed |
| [203286.317755] PM: resume of devices complete after 1137.643 msecs |
| [203286.318142] Restarting tasks ... done. |
| [203286.333947] usb 1-4: USB disconnect, device number 19 |
| [203286.335922] xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff88007a18a400 |
| [203286.335928] xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff88007a18a490 |
| [203286.335931] xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff88007a18a448 |
| [203286.335934] xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff88002854bdc8 |
| [203286.335937] xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff88002854bd80 |
| [203286.488949] usb 1-4: new full-speed USB device number 22 using xhci_hcd |
| [203286.654976] usb 1-4: string descriptor 0 malformed (err = -61), defaulting to 0x0409 |
| [203286.657069] usb 1-4: New USB device found, idVendor=0cf3, idProduct=311e |
| [203286.657074] usb 1-4: New USB device strings: Mfr=1, Product=2, SerialNumber=3 |
| [203286.697535] usb 1-4: USB disconnect, device number 22 |
| [203286.981955] usb 1-4: new full-speed USB device number 23 using xhci_hcd |
| [203287.147178] usb 1-4: string descriptor 0 malformed (err = -61), defaulting to 0x0409 |
| [203287.149154] usb 1-4: New USB device found, idVendor=0cf3, idProduct=311e |
| [203287.149158] usb 1-4: New USB device strings: Mfr=1, Product=2, SerialNumber=3 |
| [203292.530466] wlp1s0: authenticate with a0:f3:c1:db:e3:48 |
| [203292.543284] wlp1s0: send auth to a0:f3:c1:db:e3:48 (try 1/3) |
| [203292.545375] wlp1s0: authenticated |
| [203292.545852] wlp1s0: associate with a0:f3:c1:db:e3:48 (try 1/3) |
| [203292.551591] wlp1s0: RX AssocResp from a0:f3:c1:db:e3:48 (capab=0x431 status=0 aid=5) |
| [203292.551772] wlp1s0: associated |
| [206585.388100] usb 1-8: USB disconnect, device number 21 |
| [206917.676607] usb 1-8: new full-speed USB device number 24 using xhci_hcd |
| [206917.842852] usb 1-8: New USB device found, idVendor=0483, idProduct=dada |
| [206917.842857] usb 1-8: New USB device strings: Mfr=1, Product=2, SerialNumber=3 |
| [206917.842860] usb 1-8: Product: SF100-ISP |
| [206917.842862] usb 1-8: Manufacturer: DediProg |
| [206917.842864] usb 1-8: SerialNumber: 20060104-0018 |
| [207043.358485] kvm: zapping shadow pages for mmio generation wraparound |
| [207227.340405] virbr0: port 2(vnet0) entered disabled state |
| [207227.341235] device vnet0 left promiscuous mode |
| [207227.341263] virbr0: port 2(vnet0) entered disabled state |
| [207230.931488] device vnet0 entered promiscuous mode |
| [207230.940497] virbr0: port 2(vnet0) entered listening state |
| [207230.940508] virbr0: port 2(vnet0) entered listening state |
| [207232.062271] usb 1-8: reset full-speed USB device number 24 using xhci_hcd |
| [207232.062301] xhci_hcd 0000:00:14.0: Setup ERROR: setup context command for slot 24. |
| [207232.062307] usb 1-8: hub failed to enable device, error -22 |
| [207232.215214] usb 1-8: reset full-speed USB device number 24 using xhci_hcd |
| [207232.215320] xhci_hcd 0000:00:14.0: Setup ERROR: setup context command for slot 24. |
| [207232.215330] usb 1-8: hub failed to enable device, error -22 |
| [207232.368130] usb 1-8: reset full-speed USB device number 24 using xhci_hcd |
| [207232.380497] xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff880078b41348 |
| [207232.380506] xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff880078b41300 |
| [207232.942836] virbr0: port 2(vnet0) entered learning state |
| [207234.946487] virbr0: topology change detected, propagating |
| [207234.946497] virbr0: port 2(vnet0) entered forwarding state |
| [207253.926594] usb 1-8: reset full-speed USB device number 24 using xhci_hcd |
| [207253.926669] xhci_hcd 0000:00:14.0: Setup ERROR: setup context command for slot 24. |
| [207253.926677] usb 1-8: hub failed to enable device, error -22 |
| [207254.079436] usb 1-8: reset full-speed USB device number 24 using xhci_hcd |
| [207254.079455] xhci_hcd 0000:00:14.0: Setup ERROR: setup context command for slot 24. |
| [207254.079459] usb 1-8: hub failed to enable device, error -22 |
| [207254.232338] usb 1-8: reset full-speed USB device number 24 using xhci_hcd |
| [207254.244983] xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff880078b41348 |
| [207254.244992] xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff880078b41300 |
| [207254.428482] usb 1-8: reset full-speed USB device number 24 using xhci_hcd |
| [207254.428507] xhci_hcd 0000:00:14.0: Setup ERROR: setup context command for slot 24. |
| [207254.428514] usb 1-8: hub failed to enable device, error -22 |
| [207254.581304] usb 1-8: reset full-speed USB device number 24 using xhci_hcd |
| [207254.581322] xhci_hcd 0000:00:14.0: Setup ERROR: setup context command for slot 24. |
| [207254.581326] usb 1-8: hub failed to enable device, error -22 |
| [207254.734216] usb 1-8: reset full-speed USB device number 24 using xhci_hcd |
| [207254.746796] xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff880078b41348 |
| [207254.746802] xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff880078b41300 |
| [209047.157186] virbr0: port 2(vnet0) entered disabled state |
| [209047.158339] device vnet0 left promiscuous mode |
| [209047.158367] virbr0: port 2(vnet0) entered disabled state |
| [209260.604177] usb 1-8: USB disconnect, device number 24 |
| [209270.646037] usb 1-8: new full-speed USB device number 25 using xhci_hcd |
| [209270.816618] usb 1-8: New USB device found, idVendor=0403, idProduct=6001 |
| [209270.816625] usb 1-8: New USB device strings: Mfr=1, Product=2, SerialNumber=3 |
| [209270.816630] usb 1-8: Product: FT232R USB UART |
| [209270.816633] usb 1-8: Manufacturer: FTDI |
| [209270.816637] usb 1-8: SerialNumber: A901LS1Z |
| [209270.843972] usbcore: registered new interface driver ftdi_sio |
| [209270.844083] usbserial: USB Serial support registered for FTDI USB Serial Device |
| [209270.844154] ftdi_sio 1-8:1.0: FTDI USB Serial Device converter detected |
| [209270.844239] usb 1-8: Detected FT232RL |
| [209270.844468] usb 1-8: FTDI USB Serial Device converter now attached to ttyUSB0 |
| [210128.105996] usb 1-8: USB disconnect, device number 25 |
| [210128.106230] ftdi_sio ttyUSB0: FTDI USB Serial Device converter now disconnected from ttyUSB0 |
| [210128.106263] ftdi_sio 1-8:1.0: device disconnected |
| [210135.195345] usb 1-8: new full-speed USB device number 26 using xhci_hcd |
| [210135.365255] usb 1-8: New USB device found, idVendor=0403, idProduct=6001 |
| [210135.365263] usb 1-8: New USB device strings: Mfr=1, Product=2, SerialNumber=3 |
| [210135.365267] usb 1-8: Product: FT232R USB UART |
| [210135.365270] usb 1-8: Manufacturer: FTDI |
| [210135.365273] usb 1-8: SerialNumber: A901LS1Z |
| [210135.368330] ftdi_sio 1-8:1.0: FTDI USB Serial Device converter detected |
| [210135.368381] usb 1-8: Detected FT232RL |
| [210135.368646] usb 1-8: FTDI USB Serial Device converter now attached to ttyUSB0 |
| [211021.213351] usb 1-8: USB disconnect, device number 26 |
| [211021.213575] ftdi_sio ttyUSB0: FTDI USB Serial Device converter now disconnected from ttyUSB0 |
| [211021.213601] ftdi_sio 1-8:1.0: device disconnected |
| [211025.025148] usb 1-8: new full-speed USB device number 27 using xhci_hcd |
| [211025.194912] usb 1-8: New USB device found, idVendor=0403, idProduct=6001 |
| [211025.194917] usb 1-8: New USB device strings: Mfr=1, Product=2, SerialNumber=3 |
| [211025.194920] usb 1-8: Product: FT232R USB UART |
| [211025.194923] usb 1-8: Manufacturer: FTDI |
| [211025.194925] usb 1-8: SerialNumber: A901LS1Z |
| [211025.198136] ftdi_sio 1-8:1.0: FTDI USB Serial Device converter detected |
| [211025.198181] usb 1-8: Detected FT232RL |
| [211025.198525] usb 1-8: FTDI USB Serial Device converter now attached to ttyUSB0 |
| [211045.370227] usb 1-8: USB disconnect, device number 27 |
| [211045.370431] ftdi_sio ttyUSB0: FTDI USB Serial Device converter now disconnected from ttyUSB0 |
| [211045.370471] ftdi_sio 1-8:1.0: device disconnected |
| [211048.496092] usb 1-8: new full-speed USB device number 28 using xhci_hcd |
| [211048.666381] usb 1-8: New USB device found, idVendor=0403, idProduct=6001 |
| [211048.666391] usb 1-8: New USB device strings: Mfr=1, Product=2, SerialNumber=3 |
| [211048.666396] usb 1-8: Product: FT232R USB UART |
| [211048.666400] usb 1-8: Manufacturer: FTDI |
| [211048.666403] usb 1-8: SerialNumber: A901LS1Z |
| [211048.669768] ftdi_sio 1-8:1.0: FTDI USB Serial Device converter detected |
| [211048.669835] usb 1-8: Detected FT232RL |
| [211048.670512] usb 1-8: FTDI USB Serial Device converter now attached to ttyUSB0 |
| [214572.914575] usb 1-8: USB disconnect, device number 28 |
| [214572.914803] ftdi_sio ttyUSB0: FTDI USB Serial Device converter now disconnected from ttyUSB0 |
| [214572.914829] ftdi_sio 1-8:1.0: device disconnected |
| [214576.266833] usb 1-8: new full-speed USB device number 29 using xhci_hcd |
| [214576.436778] usb 1-8: New USB device found, idVendor=0403, idProduct=6001 |
| [214576.436784] usb 1-8: New USB device strings: Mfr=1, Product=2, SerialNumber=3 |
| [214576.436787] usb 1-8: Product: FT232R USB UART |
| [214576.436789] usb 1-8: Manufacturer: FTDI |
| [214576.436791] usb 1-8: SerialNumber: A901LS1Z |
| [214576.439582] ftdi_sio 1-8:1.0: FTDI USB Serial Device converter detected |
| [214576.439652] usb 1-8: Detected FT232RL |
| [214576.440178] usb 1-8: FTDI USB Serial Device converter now attached to ttyUSB0 |
| [214650.452046] usb 1-8: USB disconnect, device number 29 |
| [214650.452273] ftdi_sio ttyUSB0: FTDI USB Serial Device converter now disconnected from ttyUSB0 |
| [214650.452302] ftdi_sio 1-8:1.0: device disconnected |
| [214653.718321] usb 1-8: new full-speed USB device number 30 using xhci_hcd |
| [214653.888235] usb 1-8: New USB device found, idVendor=0403, idProduct=6001 |
| [214653.888245] usb 1-8: New USB device strings: Mfr=1, Product=2, SerialNumber=3 |
| [214653.888250] usb 1-8: Product: FT232R USB UART |
| [214653.888254] usb 1-8: Manufacturer: FTDI |
| [214653.888257] usb 1-8: SerialNumber: A901LS1Z |
| [214653.891180] ftdi_sio 1-8:1.0: FTDI USB Serial Device converter detected |
| [214653.891274] usb 1-8: Detected FT232RL |
| [214653.892060] usb 1-8: FTDI USB Serial Device converter now attached to ttyUSB0 |
| [217955.256890] usb 1-8: USB disconnect, device number 30 |
| [217955.257149] ftdi_sio ttyUSB0: FTDI USB Serial Device converter now disconnected from ttyUSB0 |
| [217955.257186] ftdi_sio 1-8:1.0: device disconnected |
| [217960.320327] usb 1-8: new full-speed USB device number 31 using xhci_hcd |
| [217960.489909] usb 1-8: New USB device found, idVendor=0403, idProduct=6001 |
| [217960.489917] usb 1-8: New USB device strings: Mfr=1, Product=2, SerialNumber=3 |
| [217960.489922] usb 1-8: Product: FT232R USB UART |
| [217960.489925] usb 1-8: Manufacturer: FTDI |
| [217960.489929] usb 1-8: SerialNumber: A901LS1Z |
| [217960.493020] ftdi_sio 1-8:1.0: FTDI USB Serial Device converter detected |
| [217960.493084] usb 1-8: Detected FT232RL |
| [217960.493778] usb 1-8: FTDI USB Serial Device converter now attached to ttyUSB0 |
| [226861.446358] usb 1-8: USB disconnect, device number 31 |
| [226861.446668] ftdi_sio ttyUSB0: FTDI USB Serial Device converter now disconnected from ttyUSB0 |
| [226861.446710] ftdi_sio 1-8:1.0: device disconnected |
| [226869.507349] usb 1-8: new full-speed USB device number 32 using xhci_hcd |
| [226869.677103] usb 1-8: New USB device found, idVendor=0403, idProduct=6001 |
| [226869.677109] usb 1-8: New USB device strings: Mfr=1, Product=2, SerialNumber=3 |
| [226869.677112] usb 1-8: Product: FT232R USB UART |
| [226869.677136] usb 1-8: Manufacturer: FTDI |
| [226869.677139] usb 1-8: SerialNumber: A901LS1Z |
| [226869.679845] ftdi_sio 1-8:1.0: FTDI USB Serial Device converter detected |
| [226869.679892] usb 1-8: Detected FT232RL |
| [226869.680205] usb 1-8: FTDI USB Serial Device converter now attached to ttyUSB0 |
| [265989.552658] usb 1-8: USB disconnect, device number 32 |
| [265989.553033] ftdi_sio ttyUSB0: FTDI USB Serial Device converter now disconnected from ttyUSB0 |
| [265989.553074] ftdi_sio 1-8:1.0: device disconnected |
| [265993.612543] usb 1-8: new full-speed USB device number 33 using xhci_hcd |
| [265993.782434] usb 1-8: New USB device found, idVendor=0403, idProduct=6001 |
| [265993.782441] usb 1-8: New USB device strings: Mfr=1, Product=2, SerialNumber=3 |
| [265993.782444] usb 1-8: Product: FT232R USB UART |
| [265993.782447] usb 1-8: Manufacturer: FTDI |
| [265993.782450] usb 1-8: SerialNumber: A901LS1Z |
| [265993.785491] ftdi_sio 1-8:1.0: FTDI USB Serial Device converter detected |
| [265993.785541] usb 1-8: Detected FT232RL |
| [265993.785827] usb 1-8: FTDI USB Serial Device converter now attached to ttyUSB0 |
| [266051.928040] usb 1-8: USB disconnect, device number 33 |
| [266051.928335] ftdi_sio ttyUSB0: FTDI USB Serial Device converter now disconnected from ttyUSB0 |
| [266051.928390] ftdi_sio 1-8:1.0: device disconnected |
| [266054.039069] usb 1-8: new full-speed USB device number 34 using xhci_hcd |
| [266054.208919] usb 1-8: New USB device found, idVendor=0403, idProduct=6001 |
| [266054.208928] usb 1-8: New USB device strings: Mfr=1, Product=2, SerialNumber=3 |
| [266054.208933] usb 1-8: Product: FT232R USB UART |
| [266054.208937] usb 1-8: Manufacturer: FTDI |
| [266054.208940] usb 1-8: SerialNumber: A901LS1Z |
| [266054.211876] ftdi_sio 1-8:1.0: FTDI USB Serial Device converter detected |
| [266054.211937] usb 1-8: Detected FT232RL |
| [266054.212249] usb 1-8: FTDI USB Serial Device converter now attached to ttyUSB0 |
| [266280.423209] ftdi_sio ttyUSB0: usb_serial_generic_read_bulk_callback - nonzero urb status: -71 |
| [266280.423334] usb 1-8: USB disconnect, device number 34 |
| [266280.423784] ftdi_sio ttyUSB0: FTDI USB Serial Device converter now disconnected from ttyUSB0 |
| [266280.423817] ftdi_sio 1-8:1.0: device disconnected |
| [266284.406183] usb 1-8: new full-speed USB device number 35 using xhci_hcd |
| [266284.575511] usb 1-8: New USB device found, idVendor=0403, idProduct=6001 |
| [266284.575516] usb 1-8: New USB device strings: Mfr=1, Product=2, SerialNumber=3 |
| [266284.575519] usb 1-8: Product: FT232R USB UART |
| [266284.575521] usb 1-8: Manufacturer: FTDI |
| [266284.575523] usb 1-8: SerialNumber: A901LS1Z |
| [266284.579510] ftdi_sio 1-8:1.0: FTDI USB Serial Device converter detected |
| [266284.579551] usb 1-8: Detected FT232RL |
| [266284.580003] usb 1-8: FTDI USB Serial Device converter now attached to ttyUSB1 |
| [266293.099974] usb 1-8: USB disconnect, device number 35 |
| [266293.100274] ftdi_sio ttyUSB1: FTDI USB Serial Device converter now disconnected from ttyUSB1 |
| [266293.100310] ftdi_sio 1-8:1.0: device disconnected |
| [266299.592577] usb 1-8: new full-speed USB device number 36 using xhci_hcd |
| [266299.762507] usb 1-8: New USB device found, idVendor=0403, idProduct=6001 |
| [266299.762517] usb 1-8: New USB device strings: Mfr=1, Product=2, SerialNumber=3 |
| [266299.762521] usb 1-8: Product: FT232R USB UART |
| [266299.762525] usb 1-8: Manufacturer: FTDI |
| [266299.762529] usb 1-8: SerialNumber: A901LS1Z |
| [266299.766637] ftdi_sio 1-8:1.0: FTDI USB Serial Device converter detected |
| [266299.766715] usb 1-8: Detected FT232RL |
| [266299.767176] usb 1-8: FTDI USB Serial Device converter now attached to ttyUSB0 |
| [266308.906640] ftdi_sio ttyUSB0: usb_serial_generic_read_bulk_callback - nonzero urb status: -71 |
| [266308.906690] ftdi_sio ttyUSB0: usb_serial_generic_read_bulk_callback - nonzero urb status: -71 |
| [266308.907712] usb 1-8: USB disconnect, device number 36 |
| [266308.914950] ftdi_sio ttyUSB0: FTDI USB Serial Device converter now disconnected from ttyUSB0 |
| [266308.914984] ftdi_sio 1-8:1.0: device disconnected |
| [266547.786867] usb 1-8: new full-speed USB device number 37 using xhci_hcd |
| [266547.957112] usb 1-8: New USB device found, idVendor=0403, idProduct=6001 |
| [266547.957121] usb 1-8: New USB device strings: Mfr=1, Product=2, SerialNumber=3 |
| [266547.957126] usb 1-8: Product: FT232R USB UART |
| [266547.957130] usb 1-8: Manufacturer: FTDI |
| [266547.957133] usb 1-8: SerialNumber: A901LS1Z |
| [266547.960925] ftdi_sio 1-8:1.0: FTDI USB Serial Device converter detected |
| [266547.960990] usb 1-8: Detected FT232RL |
| [266547.961367] usb 1-8: FTDI USB Serial Device converter now attached to ttyUSB0 |
| [266666.602012] usb 1-8: USB disconnect, device number 37 |
| [266666.602174] ftdi_sio ttyUSB0: FTDI USB Serial Device converter now disconnected from ttyUSB0 |
| [266666.602196] ftdi_sio 1-8:1.0: device disconnected |
| [266668.784059] usb 1-8: new full-speed USB device number 38 using xhci_hcd |
| [266668.953841] usb 1-8: New USB device found, idVendor=0403, idProduct=6001 |
| [266668.953847] usb 1-8: New USB device strings: Mfr=1, Product=2, SerialNumber=3 |
| [266668.953850] usb 1-8: Product: FT232R USB UART |
| [266668.953852] usb 1-8: Manufacturer: FTDI |
| [266668.953854] usb 1-8: SerialNumber: A901LS1Z |
| [266668.957050] ftdi_sio 1-8:1.0: FTDI USB Serial Device converter detected |
| [266668.957096] usb 1-8: Detected FT232RL |
| [266668.957321] usb 1-8: FTDI USB Serial Device converter now attached to ttyUSB0 |
| [266768.259845] usb 1-8: USB disconnect, device number 38 |
| [266768.260079] ftdi_sio ttyUSB0: FTDI USB Serial Device converter now disconnected from ttyUSB0 |
| [266768.260106] ftdi_sio 1-8:1.0: device disconnected |
| [266775.999604] usb 1-8: new full-speed USB device number 39 using xhci_hcd |
| [266776.169543] usb 1-8: New USB device found, idVendor=0403, idProduct=6001 |
| [266776.169550] usb 1-8: New USB device strings: Mfr=1, Product=2, SerialNumber=3 |
| [266776.169554] usb 1-8: Product: FT232R USB UART |
| [266776.169558] usb 1-8: Manufacturer: FTDI |
| [266776.169561] usb 1-8: SerialNumber: A901LS1Z |
| [266776.172504] ftdi_sio 1-8:1.0: FTDI USB Serial Device converter detected |
| [266776.172570] usb 1-8: Detected FT232RL |
| [266776.172949] usb 1-8: FTDI USB Serial Device converter now attached to ttyUSB0 |
| [266813.461043] usb 1-8: USB disconnect, device number 39 |
| [266813.461351] ftdi_sio ttyUSB0: FTDI USB Serial Device converter now disconnected from ttyUSB0 |
| [266813.461388] ftdi_sio 1-8:1.0: device disconnected |
| [266820.315002] usb 1-8: new full-speed USB device number 40 using xhci_hcd |
| [266820.481321] usb 1-8: New USB device found, idVendor=0483, idProduct=dada |
| [266820.481328] usb 1-8: New USB device strings: Mfr=1, Product=2, SerialNumber=3 |
| [266820.481331] usb 1-8: Product: SF100-ISP |
| [266820.481334] usb 1-8: Manufacturer: DediProg |
| [266820.481336] usb 1-8: SerialNumber: 20060104-000A |
| [266825.567685] usb 1-8: USB disconnect, device number 40 |
| [266831.013155] usb 1-8: new full-speed USB device number 41 using xhci_hcd |
| [266831.183000] usb 1-8: New USB device found, idVendor=0403, idProduct=6001 |
| [266831.183006] usb 1-8: New USB device strings: Mfr=1, Product=2, SerialNumber=3 |
| [266831.183009] usb 1-8: Product: FT232R USB UART |
| [266831.183011] usb 1-8: Manufacturer: FTDI |
| [266831.183013] usb 1-8: SerialNumber: A901LS1Z |
| [266831.185753] ftdi_sio 1-8:1.0: FTDI USB Serial Device converter detected |
| [266831.185803] usb 1-8: Detected FT232RL |
| [266831.186355] usb 1-8: FTDI USB Serial Device converter now attached to ttyUSB0 |
| [266893.231890] usb 1-8: USB disconnect, device number 41 |
| [266893.232193] ftdi_sio ttyUSB0: FTDI USB Serial Device converter now disconnected from ttyUSB0 |
| [266893.232228] ftdi_sio 1-8:1.0: device disconnected |
| [266902.281903] usb 1-8: new full-speed USB device number 42 using xhci_hcd |
| [266902.451713] usb 1-8: New USB device found, idVendor=0403, idProduct=6001 |
| [266902.451719] usb 1-8: New USB device strings: Mfr=1, Product=2, SerialNumber=3 |
| [266902.451722] usb 1-8: Product: FT232R USB UART |
| [266902.451725] usb 1-8: Manufacturer: FTDI |
| [266902.451727] usb 1-8: SerialNumber: A901LS1Z |
| [266902.454468] ftdi_sio 1-8:1.0: FTDI USB Serial Device converter detected |
| [266902.454516] usb 1-8: Detected FT232RL |
| [266902.455203] usb 1-8: FTDI USB Serial Device converter now attached to ttyUSB0 |
| [266940.733412] usb 1-8: USB disconnect, device number 42 |
| [266940.733696] ftdi_sio ttyUSB0: FTDI USB Serial Device converter now disconnected from ttyUSB0 |
| [266940.733727] ftdi_sio 1-8:1.0: device disconnected |
| [266955.281773] usb 1-8: new full-speed USB device number 43 using xhci_hcd |
| [266955.451945] usb 1-8: New USB device found, idVendor=0403, idProduct=6001 |
| [266955.451951] usb 1-8: New USB device strings: Mfr=1, Product=2, SerialNumber=3 |
| [266955.451954] usb 1-8: Product: FT232R USB UART |
| [266955.451956] usb 1-8: Manufacturer: FTDI |
| [266955.451958] usb 1-8: SerialNumber: A901LS1Z |
| [266955.454697] ftdi_sio 1-8:1.0: FTDI USB Serial Device converter detected |
| [266955.454745] usb 1-8: Detected FT232RL |
| [266955.455016] usb 1-8: FTDI USB Serial Device converter now attached to ttyUSB0 |
| [266967.925481] usb 1-8: USB disconnect, device number 43 |
| [266967.925757] ftdi_sio ttyUSB0: FTDI USB Serial Device converter now disconnected from ttyUSB0 |
| [266967.925790] ftdi_sio 1-8:1.0: device disconnected |
| [266990.992606] usb 1-8: new full-speed USB device number 44 using xhci_hcd |
| [266991.162486] usb 1-8: New USB device found, idVendor=0403, idProduct=6001 |
| [266991.162492] usb 1-8: New USB device strings: Mfr=1, Product=2, SerialNumber=3 |
| [266991.162495] usb 1-8: Product: FT232R USB UART |
| [266991.162498] usb 1-8: Manufacturer: FTDI |
| [266991.162500] usb 1-8: SerialNumber: A901LS1Z |
| [266991.165283] ftdi_sio 1-8:1.0: FTDI USB Serial Device converter detected |
| [266991.165335] usb 1-8: Detected FT232RL |
| [266991.165949] usb 1-8: FTDI USB Serial Device converter now attached to ttyUSB0 |
| [267004.734004] usb 1-8: USB disconnect, device number 44 |
| [267004.734200] ftdi_sio ttyUSB0: FTDI USB Serial Device converter now disconnected from ttyUSB0 |
| [267004.734223] ftdi_sio 1-8:1.0: device disconnected |
| [267011.026100] usb 1-8: new full-speed USB device number 45 using xhci_hcd |
| [267011.195870] usb 1-8: New USB device found, idVendor=0403, idProduct=6001 |
| [267011.195878] usb 1-8: New USB device strings: Mfr=1, Product=2, SerialNumber=3 |
| [267011.195882] usb 1-8: Product: FT232R USB UART |
| [267011.195886] usb 1-8: Manufacturer: FTDI |
| [267011.195889] usb 1-8: SerialNumber: A901LS1Z |
| [267011.201259] ftdi_sio 1-8:1.0: FTDI USB Serial Device converter detected |
| [267011.201313] usb 1-8: Detected FT232RL |
| [267011.201973] usb 1-8: FTDI USB Serial Device converter now attached to ttyUSB0 |
| [267032.918932] usb 1-8: USB disconnect, device number 45 |
| [267032.919156] ftdi_sio ttyUSB0: FTDI USB Serial Device converter now disconnected from ttyUSB0 |
| [267032.919181] ftdi_sio 1-8:1.0: device disconnected |
| [267054.797604] usb 1-8: new full-speed USB device number 46 using xhci_hcd |
| [267054.964025] usb 1-8: New USB device found, idVendor=0483, idProduct=dada |
| [267054.964032] usb 1-8: New USB device strings: Mfr=1, Product=2, SerialNumber=3 |
| [267054.964036] usb 1-8: Product: SF100-ISP |
| [267054.964040] usb 1-8: Manufacturer: DediProg |
| [267054.964043] usb 1-8: SerialNumber: 20060104-0010 |
| [268285.700874] usb 1-8: USB disconnect, device number 46 |
| [268290.799128] usb 1-8: new full-speed USB device number 47 using xhci_hcd |
| [268290.965463] usb 1-8: New USB device found, idVendor=0483, idProduct=dada |
| [268290.965468] usb 1-8: New USB device strings: Mfr=1, Product=2, SerialNumber=3 |
| [268290.965471] usb 1-8: Product: SF100-ISP |
| [268290.965473] usb 1-8: Manufacturer: DediProg |
| [268290.965476] usb 1-8: SerialNumber: 20060104-0011 |
| [268459.025094] usb 1-8: USB disconnect, device number 47 |
| [268462.426456] usb 1-8: new full-speed USB device number 48 using xhci_hcd |
| [268462.592981] usb 1-8: New USB device found, idVendor=0483, idProduct=dada |
| [268462.592990] usb 1-8: New USB device strings: Mfr=1, Product=2, SerialNumber=3 |
| [268462.592995] usb 1-8: Product: SF100-ISP |
| [268462.592999] usb 1-8: Manufacturer: DediProg |
| [268462.593002] usb 1-8: SerialNumber: 20060104-0012 |
| [268504.705250] device vnet0 entered promiscuous mode |
| [268504.714293] virbr0: port 2(vnet0) entered listening state |
| [268504.714304] virbr0: port 2(vnet0) entered listening state |
| [268505.465828] usb 1-8: reset full-speed USB device number 48 using xhci_hcd |
| [268505.465859] xhci_hcd 0000:00:14.0: Setup ERROR: setup context command for slot 18. |
| [268505.465863] usb 1-8: hub failed to enable device, error -22 |
| [268505.618864] usb 1-8: reset full-speed USB device number 48 using xhci_hcd |
| [268505.618878] xhci_hcd 0000:00:14.0: Setup ERROR: setup context command for slot 18. |
| [268505.618882] usb 1-8: hub failed to enable device, error -22 |
| [268505.771954] usb 1-8: reset full-speed USB device number 48 using xhci_hcd |
| [268505.784443] xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff88002557c948 |
| [268505.784449] xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff88002557c900 |
| [268506.719628] virbr0: port 2(vnet0) entered learning state |
| [268508.723278] virbr0: topology change detected, propagating |
| [268508.723289] virbr0: port 2(vnet0) entered forwarding state |
| [268531.843636] usb 1-8: reset full-speed USB device number 48 using xhci_hcd |
| [268531.843751] xhci_hcd 0000:00:14.0: Setup ERROR: setup context command for slot 18. |
| [268531.843757] usb 1-8: hub failed to enable device, error -22 |
| [268531.996415] usb 1-8: reset full-speed USB device number 48 using xhci_hcd |
| [268531.996530] xhci_hcd 0000:00:14.0: Setup ERROR: setup context command for slot 18. |
| [268531.996537] usb 1-8: hub failed to enable device, error -22 |
| [268532.149299] usb 1-8: reset full-speed USB device number 48 using xhci_hcd |
| [268532.161505] xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff88002557c948 |
| [268532.161512] xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff88002557c900 |
| [268532.646373] usb 1-8: reset full-speed USB device number 48 using xhci_hcd |
| [268532.646399] xhci_hcd 0000:00:14.0: Setup ERROR: setup context command for slot 18. |
| [268532.646403] usb 1-8: hub failed to enable device, error -22 |
| [268532.799343] usb 1-8: reset full-speed USB device number 48 using xhci_hcd |
| [268532.799412] xhci_hcd 0000:00:14.0: Setup ERROR: setup context command for slot 18. |
| [268532.799418] usb 1-8: hub failed to enable device, error -22 |
| [268532.952307] usb 1-8: reset full-speed USB device number 48 using xhci_hcd |
| [268532.964916] xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff88002557c948 |
| [268532.964925] xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff88002557c900 |
| [269108.231223] virbr0: port 2(vnet0) entered disabled state |
| [269108.232566] device vnet0 left promiscuous mode |
| [269108.232596] virbr0: port 2(vnet0) entered disabled state |
| [272102.583788] usb 1-8: USB disconnect, device number 48 |
| [295143.305755] cfg80211: Calling CRDA to update world regulatory domain |
| [295143.311788] cfg80211: World regulatory domain updated: |
| [295143.311794] cfg80211: DFS Master region: unset |
| [295143.311796] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp), (dfs_cac_time) |
| [295143.311800] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (N/A, 2000 mBm), (N/A) |
| [295143.311803] cfg80211: (2457000 KHz - 2482000 KHz @ 40000 KHz), (N/A, 2000 mBm), (N/A) |
| [295143.311805] cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (N/A, 2000 mBm), (N/A) |
| [295143.311807] cfg80211: (5170000 KHz - 5250000 KHz @ 80000 KHz), (N/A, 2000 mBm), (N/A) |
| [295143.311810] cfg80211: (5735000 KHz - 5835000 KHz @ 80000 KHz), (N/A, 2000 mBm), (N/A) |
| [295143.311812] cfg80211: (57240000 KHz - 63720000 KHz @ 2160000 KHz), (N/A, 0 mBm), (N/A) |
| [295143.311835] cfg80211: Calling CRDA for country: IE |
| [295143.333466] cfg80211: Regulatory domain changed to country: IE |
| [295143.333471] cfg80211: DFS Master region: unset |
| [295143.333473] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp), (dfs_cac_time) |
| [295143.333476] cfg80211: (2402000 KHz - 2482000 KHz @ 40000 KHz), (N/A, 2000 mBm), (N/A) |
| [295143.333479] cfg80211: (5170000 KHz - 5250000 KHz @ 80000 KHz), (N/A, 2000 mBm), (N/A) |
| [295143.333481] cfg80211: (5250000 KHz - 5330000 KHz @ 80000 KHz), (N/A, 2000 mBm), (0 s) |
| [295143.333483] cfg80211: (5490000 KHz - 5710000 KHz @ 80000 KHz), (N/A, 2700 mBm), (0 s) |
| [295143.333485] cfg80211: (57240000 KHz - 65880000 KHz @ 2160000 KHz), (N/A, 4000 mBm), (N/A) |
| [295190.732276] wlp1s0: authenticate with a0:f3:c1:db:e3:48 |
| [295190.742830] wlp1s0: send auth to a0:f3:c1:db:e3:48 (try 1/3) |
| [295190.744817] wlp1s0: authenticated |
| [295190.745261] wlp1s0: associate with a0:f3:c1:db:e3:48 (try 1/3) |
| [295190.749027] wlp1s0: RX AssocResp from a0:f3:c1:db:e3:48 (capab=0x431 status=0 aid=3) |
| [295190.749112] wlp1s0: associated |
| [316853.560743] cfg80211: Calling CRDA to update world regulatory domain |
| [316853.564136] cfg80211: World regulatory domain updated: |
| [316853.564141] cfg80211: DFS Master region: unset |
| [316853.564144] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp), (dfs_cac_time) |
| [316853.564148] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (N/A, 2000 mBm), (N/A) |
| [316853.564151] cfg80211: (2457000 KHz - 2482000 KHz @ 40000 KHz), (N/A, 2000 mBm), (N/A) |
| [316853.564153] cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (N/A, 2000 mBm), (N/A) |
| [316853.564155] cfg80211: (5170000 KHz - 5250000 KHz @ 80000 KHz), (N/A, 2000 mBm), (N/A) |
| [316853.564158] cfg80211: (5735000 KHz - 5835000 KHz @ 80000 KHz), (N/A, 2000 mBm), (N/A) |
| [316853.564160] cfg80211: (57240000 KHz - 63720000 KHz @ 2160000 KHz), (N/A, 0 mBm), (N/A) |
| [316853.565275] cfg80211: Calling CRDA for country: IE |
| [316853.577674] cfg80211: Regulatory domain changed to country: IE |
| [316853.577679] cfg80211: DFS Master region: unset |
| [316853.577681] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp), (dfs_cac_time) |
| [316853.577685] cfg80211: (2402000 KHz - 2482000 KHz @ 40000 KHz), (N/A, 2000 mBm), (N/A) |
| [316853.577688] cfg80211: (5170000 KHz - 5250000 KHz @ 80000 KHz), (N/A, 2000 mBm), (N/A) |
| [316853.577690] cfg80211: (5250000 KHz - 5330000 KHz @ 80000 KHz), (N/A, 2000 mBm), (0 s) |
| [316853.577692] cfg80211: (5490000 KHz - 5710000 KHz @ 80000 KHz), (N/A, 2700 mBm), (0 s) |
| [316853.577695] cfg80211: (57240000 KHz - 65880000 KHz @ 2160000 KHz), (N/A, 4000 mBm), (N/A) |
| [316856.691593] wlp1s0: authenticate with a0:f3:c1:db:e3:48 |
| [316856.704409] wlp1s0: send auth to a0:f3:c1:db:e3:48 (try 1/3) |
| [316856.848619] wlp1s0: send auth to a0:f3:c1:db:e3:48 (try 2/3) |
| [316856.991523] wlp1s0: send auth to a0:f3:c1:db:e3:48 (try 3/3) |
| [316857.119832] wlp1s0: authentication with a0:f3:c1:db:e3:48 timed out |
| [316901.030186] wlp1s0: authenticate with a0:f3:c1:db:e3:48 |
| [316901.043023] wlp1s0: send auth to a0:f3:c1:db:e3:48 (try 1/3) |
| [316901.045089] wlp1s0: authenticated |
| [316901.046359] wlp1s0: associate with a0:f3:c1:db:e3:48 (try 1/3) |
| [316901.050212] wlp1s0: RX AssocResp from a0:f3:c1:db:e3:48 (capab=0x431 status=0 aid=3) |
| [316901.050310] wlp1s0: associated |
| [357382.413226] wlp1s0: deauthenticating from a0:f3:c1:db:e3:48 by local choice (Reason: 3=DEAUTH_LEAVING) |
| [357382.420352] cfg80211: Calling CRDA to update world regulatory domain |
| [357382.423352] cfg80211: World regulatory domain updated: |
| [357382.423357] cfg80211: DFS Master region: unset |
| [357382.423359] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp), (dfs_cac_time) |
| [357382.423362] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (N/A, 2000 mBm), (N/A) |
| [357382.423365] cfg80211: (2457000 KHz - 2482000 KHz @ 40000 KHz), (N/A, 2000 mBm), (N/A) |
| [357382.423367] cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (N/A, 2000 mBm), (N/A) |
| [357382.423369] cfg80211: (5170000 KHz - 5250000 KHz @ 80000 KHz), (N/A, 2000 mBm), (N/A) |
| [357382.423371] cfg80211: (5735000 KHz - 5835000 KHz @ 80000 KHz), (N/A, 2000 mBm), (N/A) |
| [357382.423373] cfg80211: (57240000 KHz - 63720000 KHz @ 2160000 KHz), (N/A, 0 mBm), (N/A) |
| [357382.423406] cfg80211: Calling CRDA for country: IE |
| [357382.453466] cfg80211: Regulatory domain changed to country: IE |
| [357382.453471] cfg80211: DFS Master region: unset |
| [357382.453473] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp), (dfs_cac_time) |
| [357382.453477] cfg80211: (2402000 KHz - 2482000 KHz @ 40000 KHz), (N/A, 2000 mBm), (N/A) |
| [357382.453479] cfg80211: (5170000 KHz - 5250000 KHz @ 80000 KHz), (N/A, 2000 mBm), (N/A) |
| [357382.453482] cfg80211: (5250000 KHz - 5330000 KHz @ 80000 KHz), (N/A, 2000 mBm), (0 s) |
| [357382.453484] cfg80211: (5490000 KHz - 5710000 KHz @ 80000 KHz), (N/A, 2700 mBm), (0 s) |
| [357382.453486] cfg80211: (57240000 KHz - 65880000 KHz @ 2160000 KHz), (N/A, 4000 mBm), (N/A) |
| [357393.929077] wlp1s0: authenticate with a0:f3:c1:db:e3:48 |
| [357393.942111] wlp1s0: send auth to a0:f3:c1:db:e3:48 (try 1/3) |
| [357393.944149] wlp1s0: authenticated |
| [357393.944441] wlp1s0: associate with a0:f3:c1:db:e3:48 (try 1/3) |
| [357393.948210] wlp1s0: RX AssocResp from a0:f3:c1:db:e3:48 (capab=0x431 status=0 aid=3) |
| [357393.948298] wlp1s0: associated |
| [360272.115428] cfg80211: Calling CRDA to update world regulatory domain |
| [360272.118870] cfg80211: World regulatory domain updated: |
| [360272.118875] cfg80211: DFS Master region: unset |
| [360272.118877] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp), (dfs_cac_time) |
| [360272.118880] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (N/A, 2000 mBm), (N/A) |
| [360272.118883] cfg80211: (2457000 KHz - 2482000 KHz @ 40000 KHz), (N/A, 2000 mBm), (N/A) |
| [360272.118885] cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (N/A, 2000 mBm), (N/A) |
| [360272.118887] cfg80211: (5170000 KHz - 5250000 KHz @ 80000 KHz), (N/A, 2000 mBm), (N/A) |
| [360272.118889] cfg80211: (5735000 KHz - 5835000 KHz @ 80000 KHz), (N/A, 2000 mBm), (N/A) |
| [360272.118891] cfg80211: (57240000 KHz - 63720000 KHz @ 2160000 KHz), (N/A, 0 mBm), (N/A) |
| [360272.119432] cfg80211: Calling CRDA for country: IE |
| [360272.128748] cfg80211: Regulatory domain changed to country: IE |
| [360272.128752] cfg80211: DFS Master region: unset |
| [360272.128754] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp), (dfs_cac_time) |
| [360272.128757] cfg80211: (2402000 KHz - 2482000 KHz @ 40000 KHz), (N/A, 2000 mBm), (N/A) |
| [360272.128760] cfg80211: (5170000 KHz - 5250000 KHz @ 80000 KHz), (N/A, 2000 mBm), (N/A) |
| [360272.128762] cfg80211: (5250000 KHz - 5330000 KHz @ 80000 KHz), (N/A, 2000 mBm), (0 s) |
| [360272.128765] cfg80211: (5490000 KHz - 5710000 KHz @ 80000 KHz), (N/A, 2700 mBm), (0 s) |
| [360272.128767] cfg80211: (57240000 KHz - 65880000 KHz @ 2160000 KHz), (N/A, 4000 mBm), (N/A) |
| [360492.421248] usb 1-2: new high-speed USB device number 49 using xhci_hcd |
| [360492.604802] usb 1-2: New USB device found, idVendor=05ac, idProduct=1402 |
| [360492.604808] usb 1-2: New USB device strings: Mfr=1, Product=2, SerialNumber=3 |
| [360492.604811] usb 1-2: Product: Apple USB Ethernet Adapter |
| [360492.604814] usb 1-2: Manufacturer: Apple Inc. |
| [360492.604816] usb 1-2: SerialNumber: 28D5FA |
| [360492.969350] asix 1-2:1.0 eth0: register 'asix' at usb-0000:00:14.0-2, ASIX AX88772 USB 2.0 Ethernet, ac:7f:3e:e5:eb:52 |
| [360492.970835] usbcore: registered new interface driver asix |
| [360492.981962] asix 1-2:1.0 enp0s20u2: renamed from eth0 |
| [360492.989499] systemd-udevd[12738]: renamed network interface eth0 to enp0s20u2 |
| [360497.609322] asix 1-2:1.0 enp0s20u2: link up, 100Mbps, full-duplex, lpa 0xC1E1 |
| [360525.124635] asix 1-2:1.0 enp0s20u2: link up, 100Mbps, full-duplex, lpa 0xC1E1 |
| [361330.313186] wlp1s0: authenticate with a0:f3:c1:db:e3:48 |
| [361330.326098] wlp1s0: send auth to a0:f3:c1:db:e3:48 (try 1/3) |
| [361330.328552] wlp1s0: authenticated |
| [361330.329385] wlp1s0: associate with a0:f3:c1:db:e3:48 (try 1/3) |
| [361330.333300] wlp1s0: RX AssocResp from a0:f3:c1:db:e3:48 (capab=0x431 status=0 aid=3) |
| [361330.333407] wlp1s0: associated |
| [361973.879486] wlp1s0: deauthenticating from a0:f3:c1:db:e3:48 by local choice (Reason: 3=DEAUTH_LEAVING) |
| [361973.886997] cfg80211: Calling CRDA to update world regulatory domain |
| [361973.892027] cfg80211: World regulatory domain updated: |
| [361973.892033] cfg80211: DFS Master region: unset |
| [361973.892035] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp), (dfs_cac_time) |
| [361973.892038] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (N/A, 2000 mBm), (N/A) |
| [361973.892041] cfg80211: (2457000 KHz - 2482000 KHz @ 40000 KHz), (N/A, 2000 mBm), (N/A) |
| [361973.892042] cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (N/A, 2000 mBm), (N/A) |
| [361973.892044] cfg80211: (5170000 KHz - 5250000 KHz @ 80000 KHz), (N/A, 2000 mBm), (N/A) |
| [361973.892046] cfg80211: (5735000 KHz - 5835000 KHz @ 80000 KHz), (N/A, 2000 mBm), (N/A) |
| [361973.892049] cfg80211: (57240000 KHz - 63720000 KHz @ 2160000 KHz), (N/A, 0 mBm), (N/A) |
| [361973.892091] cfg80211: Calling CRDA for country: IE |
| [361973.906444] cfg80211: Regulatory domain changed to country: IE |
| [361973.906450] cfg80211: DFS Master region: unset |
| [361973.906452] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp), (dfs_cac_time) |
| [361973.906455] cfg80211: (2402000 KHz - 2482000 KHz @ 40000 KHz), (N/A, 2000 mBm), (N/A) |
| [361973.906458] cfg80211: (5170000 KHz - 5250000 KHz @ 80000 KHz), (N/A, 2000 mBm), (N/A) |
| [361973.906460] cfg80211: (5250000 KHz - 5330000 KHz @ 80000 KHz), (N/A, 2000 mBm), (0 s) |
| [361973.906462] cfg80211: (5490000 KHz - 5710000 KHz @ 80000 KHz), (N/A, 2700 mBm), (0 s) |
| [361973.906464] cfg80211: (57240000 KHz - 65880000 KHz @ 2160000 KHz), (N/A, 4000 mBm), (N/A) |
| [361983.567597] wlp1s0: authenticate with a0:f3:c1:db:e3:48 |
| [361983.580456] wlp1s0: send auth to a0:f3:c1:db:e3:48 (try 1/3) |
| [361983.582599] wlp1s0: authenticated |
| [361983.582984] wlp1s0: associate with a0:f3:c1:db:e3:48 (try 1/3) |
| [361983.588950] wlp1s0: RX AssocResp from a0:f3:c1:db:e3:48 (capab=0x431 status=0 aid=3) |
| [361983.589052] wlp1s0: associated |
| [363760.511083] cfg80211: Calling CRDA to update world regulatory domain |
| [363760.514222] cfg80211: World regulatory domain updated: |
| [363760.514228] cfg80211: DFS Master region: unset |
| [363760.514230] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp), (dfs_cac_time) |
| [363760.514234] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (N/A, 2000 mBm), (N/A) |
| [363760.514236] cfg80211: (2457000 KHz - 2482000 KHz @ 40000 KHz), (N/A, 2000 mBm), (N/A) |
| [363760.514238] cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (N/A, 2000 mBm), (N/A) |
| [363760.514240] cfg80211: (5170000 KHz - 5250000 KHz @ 80000 KHz), (N/A, 2000 mBm), (N/A) |
| [363760.514242] cfg80211: (5735000 KHz - 5835000 KHz @ 80000 KHz), (N/A, 2000 mBm), (N/A) |
| [363760.514244] cfg80211: (57240000 KHz - 63720000 KHz @ 2160000 KHz), (N/A, 0 mBm), (N/A) |
| [363760.514265] cfg80211: Calling CRDA for country: IE |
| [363760.527694] cfg80211: Regulatory domain changed to country: IE |
| [363760.527699] cfg80211: DFS Master region: unset |
| [363760.527701] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp), (dfs_cac_time) |
| [363760.527704] cfg80211: (2402000 KHz - 2482000 KHz @ 40000 KHz), (N/A, 2000 mBm), (N/A) |
| [363760.527706] cfg80211: (5170000 KHz - 5250000 KHz @ 80000 KHz), (N/A, 2000 mBm), (N/A) |
| [363760.527709] cfg80211: (5250000 KHz - 5330000 KHz @ 80000 KHz), (N/A, 2000 mBm), (0 s) |
| [363760.527711] cfg80211: (5490000 KHz - 5710000 KHz @ 80000 KHz), (N/A, 2700 mBm), (0 s) |
| [363760.527713] cfg80211: (57240000 KHz - 65880000 KHz @ 2160000 KHz), (N/A, 4000 mBm), (N/A) |
| [363763.637083] wlp1s0: authenticate with a0:f3:c1:db:e3:48 |
| [363763.649778] wlp1s0: send auth to a0:f3:c1:db:e3:48 (try 1/3) |
| [363763.768542] wlp1s0: send auth to a0:f3:c1:db:e3:48 (try 2/3) |
| [363763.847106] wlp1s0: send auth to a0:f3:c1:db:e3:48 (try 3/3) |
| [363763.961078] wlp1s0: authentication with a0:f3:c1:db:e3:48 timed out |
| [363830.560063] asix 1-2:1.0 enp0s20u2: link up, 100Mbps, full-duplex, lpa 0xC1E1 |
| [363888.278451] asix 1-2:1.0 enp0s20u2: link up, 100Mbps, full-duplex, lpa 0xC1E1 |
| [364053.004964] wlp1s0: authenticate with 9c:c1:72:10:42:7e |
| [364053.018730] wlp1s0: send auth to 9c:c1:72:10:42:7e (try 1/3) |
| [364053.020693] wlp1s0: authenticated |
| [364053.021357] wlp1s0: associate with 9c:c1:72:10:42:7e (try 1/3) |
| [364053.025440] wlp1s0: RX AssocResp from 9c:c1:72:10:42:7e (capab=0x411 status=0 aid=1) |
| [364053.025520] wlp1s0: associated |
| [364072.695822] asix 1-2:1.0 enp0s20u2: link up, 100Mbps, full-duplex, lpa 0xC1E1 |
| [364097.448160] cfg80211: Calling CRDA to update world regulatory domain |
| [364097.451136] cfg80211: World regulatory domain updated: |
| [364097.451141] cfg80211: DFS Master region: unset |
| [364097.451143] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp), (dfs_cac_time) |
| [364097.451146] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (N/A, 2000 mBm), (N/A) |
| [364097.451149] cfg80211: (2457000 KHz - 2482000 KHz @ 40000 KHz), (N/A, 2000 mBm), (N/A) |
| [364097.451151] cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (N/A, 2000 mBm), (N/A) |
| [364097.451153] cfg80211: (5170000 KHz - 5250000 KHz @ 80000 KHz), (N/A, 2000 mBm), (N/A) |
| [364097.451155] cfg80211: (5735000 KHz - 5835000 KHz @ 80000 KHz), (N/A, 2000 mBm), (N/A) |
| [364097.451157] cfg80211: (57240000 KHz - 63720000 KHz @ 2160000 KHz), (N/A, 0 mBm), (N/A) |
| [364097.451177] cfg80211: Calling CRDA for country: IE |
| [364097.467565] cfg80211: Regulatory domain changed to country: IE |
| [364097.467570] cfg80211: DFS Master region: unset |
| [364097.467572] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp), (dfs_cac_time) |
| [364097.467576] cfg80211: (2402000 KHz - 2482000 KHz @ 40000 KHz), (N/A, 2000 mBm), (N/A) |
| [364097.467578] cfg80211: (5170000 KHz - 5250000 KHz @ 80000 KHz), (N/A, 2000 mBm), (N/A) |
| [364097.467580] cfg80211: (5250000 KHz - 5330000 KHz @ 80000 KHz), (N/A, 2000 mBm), (0 s) |
| [364097.467582] cfg80211: (5490000 KHz - 5710000 KHz @ 80000 KHz), (N/A, 2700 mBm), (0 s) |
| [364097.467584] cfg80211: (57240000 KHz - 65880000 KHz @ 2160000 KHz), (N/A, 4000 mBm), (N/A) |
| [364100.574859] wlp1s0: authenticate with 9c:c1:72:10:42:7e |
| [364100.588034] wlp1s0: send auth to 9c:c1:72:10:42:7e (try 1/3) |
| [364100.716462] wlp1s0: send auth to 9c:c1:72:10:42:7e (try 2/3) |
| [364100.833112] wlp1s0: send auth to 9c:c1:72:10:42:7e (try 3/3) |
| [364100.920552] wlp1s0: authentication with 9c:c1:72:10:42:7e timed out |
| [364112.492014] wlp1s0: authenticate with 9c:c1:72:10:42:7e |
| [364112.504554] wlp1s0: send auth to 9c:c1:72:10:42:7e (try 1/3) |
| [364112.506592] wlp1s0: authenticated |
| [364112.507342] wlp1s0: associate with 9c:c1:72:10:42:7e (try 1/3) |
| [364112.511114] wlp1s0: RX AssocResp from 9c:c1:72:10:42:7e (capab=0x411 status=0 aid=4) |
| [364112.511197] wlp1s0: associated |
| [370303.381826] cfg80211: Calling CRDA to update world regulatory domain |
| [370303.385614] cfg80211: World regulatory domain updated: |
| [370303.385620] cfg80211: DFS Master region: unset |
| [370303.385622] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp), (dfs_cac_time) |
| [370303.385626] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (N/A, 2000 mBm), (N/A) |
| [370303.385629] cfg80211: (2457000 KHz - 2482000 KHz @ 40000 KHz), (N/A, 2000 mBm), (N/A) |
| [370303.385632] cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (N/A, 2000 mBm), (N/A) |
| [370303.385634] cfg80211: (5170000 KHz - 5250000 KHz @ 80000 KHz), (N/A, 2000 mBm), (N/A) |
| [370303.385636] cfg80211: (5735000 KHz - 5835000 KHz @ 80000 KHz), (N/A, 2000 mBm), (N/A) |
| [370303.385639] cfg80211: (57240000 KHz - 63720000 KHz @ 2160000 KHz), (N/A, 0 mBm), (N/A) |
| [370303.385664] cfg80211: Calling CRDA for country: IE |
| [370303.395419] cfg80211: Regulatory domain changed to country: IE |
| [370303.395424] cfg80211: DFS Master region: unset |
| [370303.395427] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp), (dfs_cac_time) |
| [370303.395430] cfg80211: (2402000 KHz - 2482000 KHz @ 40000 KHz), (N/A, 2000 mBm), (N/A) |
| [370303.395433] cfg80211: (5170000 KHz - 5250000 KHz @ 80000 KHz), (N/A, 2000 mBm), (N/A) |
| [370303.395435] cfg80211: (5250000 KHz - 5330000 KHz @ 80000 KHz), (N/A, 2000 mBm), (0 s) |
| [370303.395437] cfg80211: (5490000 KHz - 5710000 KHz @ 80000 KHz), (N/A, 2700 mBm), (0 s) |
| [370303.395440] cfg80211: (57240000 KHz - 65880000 KHz @ 2160000 KHz), (N/A, 4000 mBm), (N/A) |
| [370479.772592] wlp1s0: authenticate with 9c:c1:72:10:42:7e |
| [370479.786385] wlp1s0: send auth to 9c:c1:72:10:42:7e (try 1/3) |
| [370479.788433] wlp1s0: authenticated |
| [370479.789037] wlp1s0: associate with 9c:c1:72:10:42:7e (try 1/3) |
| [370479.792822] wlp1s0: RX AssocResp from 9c:c1:72:10:42:7e (capab=0x411 status=0 aid=3) |
| [370479.792920] wlp1s0: associated |
| [371278.662305] traps: polkitd[10054] general protection ip:7f1fea971cf2 sp:7fff503776e0 error:0 in libmozjs-17.0.so[7f1fea833000+3b3000] |
| [373301.386133] usb 1-2: USB disconnect, device number 49 |
| [373301.386253] asix 1-2:1.0 enp0s20u2: unregister 'asix' usb-0000:00:14.0-2, ASIX AX88772 USB 2.0 Ethernet |
| [407932.019021] polkitd[26429]: segfault at 15 ip 00007f59b9b9b9bd sp 00007fff0b663f80 error 4 in libmozjs-17.0.so[7f59b9a9f000+3b3000] |
| [409814.595236] cfg80211: Calling CRDA to update world regulatory domain |
| [409814.604017] cfg80211: World regulatory domain updated: |
| [409814.604021] cfg80211: DFS Master region: unset |
| [409814.604023] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp), (dfs_cac_time) |
| [409814.604027] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (N/A, 2000 mBm), (N/A) |
| [409814.604029] cfg80211: (2457000 KHz - 2482000 KHz @ 40000 KHz), (N/A, 2000 mBm), (N/A) |
| [409814.604031] cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (N/A, 2000 mBm), (N/A) |
| [409814.604033] cfg80211: (5170000 KHz - 5250000 KHz @ 80000 KHz), (N/A, 2000 mBm), (N/A) |
| [409814.604035] cfg80211: (5735000 KHz - 5835000 KHz @ 80000 KHz), (N/A, 2000 mBm), (N/A) |
| [409814.604037] cfg80211: (57240000 KHz - 63720000 KHz @ 2160000 KHz), (N/A, 0 mBm), (N/A) |
| [409814.604058] cfg80211: Calling CRDA for country: IE |
| [409814.616840] cfg80211: Regulatory domain changed to country: IE |
| [409814.616845] cfg80211: DFS Master region: unset |
| [409814.616847] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp), (dfs_cac_time) |
| [409814.616850] cfg80211: (2402000 KHz - 2482000 KHz @ 40000 KHz), (N/A, 2000 mBm), (N/A) |
| [409814.616853] cfg80211: (5170000 KHz - 5250000 KHz @ 80000 KHz), (N/A, 2000 mBm), (N/A) |
| [409814.616855] cfg80211: (5250000 KHz - 5330000 KHz @ 80000 KHz), (N/A, 2000 mBm), (0 s) |
| [409814.616857] cfg80211: (5490000 KHz - 5710000 KHz @ 80000 KHz), (N/A, 2700 mBm), (0 s) |
| [409814.616859] cfg80211: (57240000 KHz - 65880000 KHz @ 2160000 KHz), (N/A, 4000 mBm), (N/A) |
| [409894.999934] wlp1s0: authenticate with 9c:c1:72:10:42:7e |
| [409895.012706] wlp1s0: send auth to 9c:c1:72:10:42:7e (try 1/3) |
| [409895.014669] wlp1s0: authenticated |
| [409895.015269] wlp1s0: associate with 9c:c1:72:10:42:7e (try 1/3) |
| [409895.019032] wlp1s0: RX AssocResp from 9c:c1:72:10:42:7e (capab=0x411 status=0 aid=2) |
| [409895.019118] wlp1s0: associated |
| [410483.069654] wlp1s0: deauthenticating from 9c:c1:72:10:42:7e by local choice (Reason: 3=DEAUTH_LEAVING) |
| [410483.076370] cfg80211: Calling CRDA to update world regulatory domain |
| [410483.084205] cfg80211: World regulatory domain updated: |
| [410483.084211] cfg80211: DFS Master region: unset |
| [410483.084213] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp), (dfs_cac_time) |
| [410483.084216] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (N/A, 2000 mBm), (N/A) |
| [410483.084219] cfg80211: (2457000 KHz - 2482000 KHz @ 40000 KHz), (N/A, 2000 mBm), (N/A) |
| [410483.084221] cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (N/A, 2000 mBm), (N/A) |
| [410483.084223] cfg80211: (5170000 KHz - 5250000 KHz @ 80000 KHz), (N/A, 2000 mBm), (N/A) |
| [410483.084225] cfg80211: (5735000 KHz - 5835000 KHz @ 80000 KHz), (N/A, 2000 mBm), (N/A) |
| [410483.084227] cfg80211: (57240000 KHz - 63720000 KHz @ 2160000 KHz), (N/A, 0 mBm), (N/A) |
| [410483.084262] cfg80211: Calling CRDA for country: IE |
| [410483.092384] cfg80211: Regulatory domain changed to country: IE |
| [410483.092389] cfg80211: DFS Master region: unset |
| [410483.092391] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp), (dfs_cac_time) |
| [410483.092394] cfg80211: (2402000 KHz - 2482000 KHz @ 40000 KHz), (N/A, 2000 mBm), (N/A) |
| [410483.092397] cfg80211: (5170000 KHz - 5250000 KHz @ 80000 KHz), (N/A, 2000 mBm), (N/A) |
| [410483.092399] cfg80211: (5250000 KHz - 5330000 KHz @ 80000 KHz), (N/A, 2000 mBm), (0 s) |
| [410483.092401] cfg80211: (5490000 KHz - 5710000 KHz @ 80000 KHz), (N/A, 2700 mBm), (0 s) |
| [410483.092403] cfg80211: (57240000 KHz - 65880000 KHz @ 2160000 KHz), (N/A, 4000 mBm), (N/A) |
| [410484.966574] PM: Syncing filesystems ... done. |
| [410484.986653] Freezing user space processes ... (elapsed 0.001 seconds) done. |
| [410484.988338] Freezing remaining freezable tasks ... (elapsed 0.000 seconds) done. |
| [410484.989093] Suspending console(s) (use no_console_suspend to debug) |
| [410485.091565] sd 0:0:0:0: [sda] Synchronizing SCSI cache |
| [410485.091612] sd 0:0:0:0: [sda] Stopping disk |
| [410485.778068] PM: suspend of devices complete after 788.965 msecs |
| [410485.793126] PM: late suspend of devices complete after 15.040 msecs |
| [410485.794013] xhci_hcd 0000:00:14.0: System wakeup enabled by ACPI |
| [410485.805265] PM: noirq suspend of devices complete after 12.136 msecs |
| [410485.805624] ACPI: Preparing to enter system sleep state S3 |
| [410485.806091] PM: Saving platform NVS memory |
| [410485.806092] Disabling non-boot CPUs ... |
| [410485.806142] intel_pstate CPU 1 exiting |
| [410485.806417] Broke affinity for irq 21 |
| [410485.806430] Broke affinity for irq 42 |
| [410485.807453] kvm: disabling virtualization on CPU1 |
| [410485.807468] smpboot: CPU 1 is now offline |
| [410485.809455] ACPI: Low-level resume complete |
| [410485.809516] PM: Restoring platform NVS memory |
| [410485.809924] Enabling non-boot CPUs ... |
| [410485.809972] x86: Booting SMP configuration: |
| [410485.809974] smpboot: Booting Node 0 Processor 1 APIC 0x2 |
| [410485.823388] CPU1 microcode updated early to revision 0x18, date = 2014-05-23 |
| [410485.824847] kvm: enabling virtualization on CPU1 |
| [410485.827285] CPU1 is up |
| [410485.829090] ACPI: Waking up from system sleep state S3 |
| [410485.839703] pci 0000:00:1d.0: Refused to change power state, currently in D3 |
| [410485.840675] xhci_hcd 0000:00:14.0: System wakeup disabled by ACPI |
| [410485.840844] PM: noirq resume of devices complete after 11.551 msecs |
| [410485.846797] PM: early resume of devices complete after 5.927 msecs |
| [410485.846929] ath: phy0: ASPM enabled: 0x43 |
| [410485.847115] snd_hda_intel 0000:00:03.0: irq 44 for MSI/MSI-X |
| [410485.847264] snd_hda_intel 0000:00:1b.0: irq 45 for MSI/MSI-X |
| [410485.847318] rtc_cmos 00:03: System wakeup disabled by ACPI |
| [410485.857692] sd 0:0:0:0: [sda] Starting disk |
| [410486.153890] usb 1-3: reset high-speed USB device number 3 using xhci_hcd |
| [410486.153961] xhci_hcd 0000:00:14.0: Setup ERROR: setup context command for slot 2. |
| [410486.153963] usb 1-3: hub failed to enable device, error -22 |
| [410486.162587] ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300) |
| [410486.163437] ata1.00: configured for UDMA/133 |
| [410486.306719] usb 1-3: reset high-speed USB device number 3 using xhci_hcd |
| [410486.306785] xhci_hcd 0000:00:14.0: Setup ERROR: setup context command for slot 2. |
| [410486.306789] usb 1-3: hub failed to enable device, error -22 |
| [410486.459698] usb 1-3: reset high-speed USB device number 3 using xhci_hcd |
| [410486.519681] xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff880172e61f60 |
| [410486.522237] restoring control 00000000-0000-0000-0000-000000000101/10/5 |
| [410486.624903] usb 1-4: reset full-speed USB device number 23 using xhci_hcd |
| [410486.624970] xhci_hcd 0000:00:14.0: Setup ERROR: setup context command for slot 23. |
| [410486.624974] usb 1-4: hub failed to enable device, error -22 |
| [410486.777654] usb 1-4: reset full-speed USB device number 23 using xhci_hcd |
| [410486.777677] xhci_hcd 0000:00:14.0: Setup ERROR: setup context command for slot 23. |
| [410486.777680] usb 1-4: hub failed to enable device, error -22 |
| [410486.930603] usb 1-4: reset full-speed USB device number 23 using xhci_hcd |
| [410486.942053] usb 1-4: device firmware changed |
| [410486.942312] PM: resume of devices complete after 1095.696 msecs |
| [410486.942669] Restarting tasks ... done. |
| [410486.961436] usb 1-4: USB disconnect, device number 23 |
| [410486.964195] xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff880172841200 |
| [410486.964200] xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff880172841290 |
| [410486.964202] xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff880172841248 |
| [410486.964205] xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff880171f5c7c8 |
| [410486.964207] xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff880171f5c780 |
| [410487.119414] usb 1-4: new full-speed USB device number 50 using xhci_hcd |
| [410487.286864] usb 1-4: string descriptor 0 malformed (err = -61), defaulting to 0x0409 |
| [410487.288769] usb 1-4: New USB device found, idVendor=0cf3, idProduct=311e |
| [410487.288774] usb 1-4: New USB device strings: Mfr=1, Product=2, SerialNumber=3 |
| [410487.326372] usb 1-4: USB disconnect, device number 50 |
| [410487.609322] usb 1-4: new full-speed USB device number 51 using xhci_hcd |
| [410487.775041] usb 1-4: string descriptor 0 malformed (err = -61), defaulting to 0x0409 |
| [410487.777089] usb 1-4: New USB device found, idVendor=0cf3, idProduct=311e |
| [410487.777094] usb 1-4: New USB device strings: Mfr=1, Product=2, SerialNumber=3 |
| [410493.211950] wlp1s0: authenticate with 9c:c1:72:10:42:7e |
| [410493.224764] wlp1s0: send auth to 9c:c1:72:10:42:7e (try 1/3) |
| [410493.226750] wlp1s0: authenticated |
| [410493.227392] wlp1s0: associate with 9c:c1:72:10:42:7e (try 1/3) |
| [410493.231280] wlp1s0: RX AssocResp from 9c:c1:72:10:42:7e (capab=0x411 status=0 aid=4) |
| [410493.231393] wlp1s0: associated |
| [410606.573062] cfg80211: Calling CRDA to update world regulatory domain |
| [410606.576252] cfg80211: World regulatory domain updated: |
| [410606.576257] cfg80211: DFS Master region: unset |
| [410606.576259] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp), (dfs_cac_time) |
| [410606.576262] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (N/A, 2000 mBm), (N/A) |
| [410606.576265] cfg80211: (2457000 KHz - 2482000 KHz @ 40000 KHz), (N/A, 2000 mBm), (N/A) |
| [410606.576267] cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (N/A, 2000 mBm), (N/A) |
| [410606.576269] cfg80211: (5170000 KHz - 5250000 KHz @ 80000 KHz), (N/A, 2000 mBm), (N/A) |
| [410606.576271] cfg80211: (5735000 KHz - 5835000 KHz @ 80000 KHz), (N/A, 2000 mBm), (N/A) |
| [410606.576273] cfg80211: (57240000 KHz - 63720000 KHz @ 2160000 KHz), (N/A, 0 mBm), (N/A) |
| [410606.576293] cfg80211: Calling CRDA for country: IE |
| [410606.579257] cfg80211: Regulatory domain changed to country: IE |
| [410606.579262] cfg80211: DFS Master region: unset |
| [410606.579264] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp), (dfs_cac_time) |
| [410606.579268] cfg80211: (2402000 KHz - 2482000 KHz @ 40000 KHz), (N/A, 2000 mBm), (N/A) |
| [410606.579270] cfg80211: (5170000 KHz - 5250000 KHz @ 80000 KHz), (N/A, 2000 mBm), (N/A) |
| [410606.579272] cfg80211: (5250000 KHz - 5330000 KHz @ 80000 KHz), (N/A, 2000 mBm), (0 s) |
| [410606.579276] cfg80211: (5490000 KHz - 5710000 KHz @ 80000 KHz), (N/A, 2700 mBm), (0 s) |
| [410606.579278] cfg80211: (57240000 KHz - 65880000 KHz @ 2160000 KHz), (N/A, 4000 mBm), (N/A) |
| [410621.755311] traps: gnome-shell[1776] trap int3 ip:7fba0e666ccd sp:7fffb4dae0f0 error:0 |
| [410655.557782] SGI XFS with ACLs, security attributes, no debug enabled |
| [410656.192425] ntfs: driver 2.1.30 [Flags: R/W MODULE]. |
| [410656.795271] raid6: sse2x1 4414 MB/s |
| [410656.812258] raid6: sse2x2 5687 MB/s |
| [410656.829253] raid6: sse2x4 6558 MB/s |
| [410656.829255] raid6: using algorithm sse2x4 (6558 MB/s) |
| [410656.829257] raid6: using ssse3x2 recovery algorithm |
| [410657.114137] xor: measuring software checksum speed |
| [410657.123201] prefetch64-sse: 8832.000 MB/sec |
| [410657.133198] generic_sse: 8584.000 MB/sec |
| [410657.133200] xor: using function: prefetch64-sse (8832.000 MB/sec) |
| [410657.597408] Btrfs loaded |
| [410659.587842] nr_pdflush_threads exported in /proc is scheduled for removal |
| [410659.587982] sysctl: The scan_unevictable_pages sysctl/node-interface has been disabled for lack of a legitimate use case. If you have one, please send an email to linux-mm@kvack.org. |
| [410686.866549] wlp1s0: authenticate with 9c:c1:72:10:42:7e |
| [410686.876530] wlp1s0: send auth to 9c:c1:72:10:42:7e (try 1/3) |
| [410686.886595] wlp1s0: authenticated |
| [410686.887318] wlp1s0: associate with 9c:c1:72:10:42:7e (try 1/3) |
| [410686.891021] wlp1s0: RX AssocResp from 9c:c1:72:10:42:7e (capab=0x411 status=0 aid=3) |
| [410686.891122] wlp1s0: associated |
| [413827.926265] usb 1-8: new full-speed USB device number 52 using xhci_hcd |
| [413828.092516] usb 1-8: New USB device found, idVendor=0483, idProduct=dada |
| [413828.092522] usb 1-8: New USB device strings: Mfr=1, Product=2, SerialNumber=3 |
| [413828.092525] usb 1-8: Product: SF100-ISP |
| [413828.092527] usb 1-8: Manufacturer: DediProg |
| [413828.092529] usb 1-8: SerialNumber: 20060104-0015 |
| [413834.048445] device vnet0 entered promiscuous mode |
| [413834.057381] virbr0: port 2(vnet0) entered listening state |
| [413834.057395] virbr0: port 2(vnet0) entered listening state |
| [413834.786159] usb 1-8: reset full-speed USB device number 52 using xhci_hcd |
| [413834.786176] xhci_hcd 0000:00:14.0: Setup ERROR: setup context command for slot 21. |
| [413834.786180] usb 1-8: hub failed to enable device, error -22 |
| [413834.939092] usb 1-8: reset full-speed USB device number 52 using xhci_hcd |
| [413834.939118] xhci_hcd 0000:00:14.0: Setup ERROR: setup context command for slot 21. |
| [413834.939126] usb 1-8: hub failed to enable device, error -22 |
| [413835.092041] usb 1-8: reset full-speed USB device number 52 using xhci_hcd |
| [413835.104304] xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff88005ea16348 |
| [413835.104311] xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff88005ea16300 |
| [413836.063685] virbr0: port 2(vnet0) entered learning state |
| [413838.067333] virbr0: topology change detected, propagating |
| [413838.067344] virbr0: port 2(vnet0) entered forwarding state |
| [413861.578484] usb 1-8: reset full-speed USB device number 52 using xhci_hcd |
| [413861.578502] xhci_hcd 0000:00:14.0: Setup ERROR: setup context command for slot 21. |
| [413861.578506] usb 1-8: hub failed to enable device, error -22 |
| [413861.731453] usb 1-8: reset full-speed USB device number 52 using xhci_hcd |
| [413861.731468] xhci_hcd 0000:00:14.0: Setup ERROR: setup context command for slot 21. |
| [413861.731472] usb 1-8: hub failed to enable device, error -22 |
| [413861.884426] usb 1-8: reset full-speed USB device number 52 using xhci_hcd |
| [413861.897043] xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff88005ea16348 |
| [413861.897049] xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff88005ea16300 |
| [413862.076445] usb 1-8: reset full-speed USB device number 52 using xhci_hcd |
| [413862.076464] xhci_hcd 0000:00:14.0: Setup ERROR: setup context command for slot 21. |
| [413862.076469] usb 1-8: hub failed to enable device, error -22 |
| [413862.229298] usb 1-8: reset full-speed USB device number 52 using xhci_hcd |
| [413862.229339] xhci_hcd 0000:00:14.0: Setup ERROR: setup context command for slot 21. |
| [413862.229350] usb 1-8: hub failed to enable device, error -22 |
| [413862.382235] usb 1-8: reset full-speed USB device number 52 using xhci_hcd |
| [413862.394583] xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff88005ea16348 |
| [413862.394588] xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff88005ea16300 |
| [414610.939745] virbr0: port 2(vnet0) entered disabled state |
| [414610.940602] device vnet0 left promiscuous mode |
| [414610.940625] virbr0: port 2(vnet0) entered disabled state |
| [414994.383382] usb 1-8: USB disconnect, device number 52 |
| [414997.635963] usb 1-8: new full-speed USB device number 53 using xhci_hcd |
| [414997.802326] usb 1-8: New USB device found, idVendor=0483, idProduct=dada |
| [414997.802332] usb 1-8: New USB device strings: Mfr=1, Product=2, SerialNumber=3 |
| [414997.802335] usb 1-8: Product: SF100-ISP |
| [414997.802338] usb 1-8: Manufacturer: DediProg |
| [414997.802341] usb 1-8: SerialNumber: 20060104-0018 |
| [419644.315082] usb 1-8: USB disconnect, device number 53 |
| [419648.172429] usb 1-8: new full-speed USB device number 54 using xhci_hcd |
| [419648.338536] usb 1-8: New USB device found, idVendor=0483, idProduct=dada |
| [419648.338544] usb 1-8: New USB device strings: Mfr=1, Product=2, SerialNumber=3 |
| [419648.338548] usb 1-8: Product: SF100-ISP |
| [419648.338551] usb 1-8: Manufacturer: DediProg |
| [419648.338555] usb 1-8: SerialNumber: 20060104-0019 |
| [421541.683083] usb 1-8: USB disconnect, device number 54 |
| [421545.123739] usb 1-8: new full-speed USB device number 55 using xhci_hcd |
| [421545.290166] usb 1-8: New USB device found, idVendor=0483, idProduct=dada |
| [421545.290175] usb 1-8: New USB device strings: Mfr=1, Product=2, SerialNumber=3 |
| [421545.290180] usb 1-8: Product: SF100-ISP |
| [421545.290184] usb 1-8: Manufacturer: DediProg |
| [421545.290187] usb 1-8: SerialNumber: 20060104-001A |
| [421582.525879] usb 1-8: USB disconnect, device number 55 |
| [421584.474952] usb 1-8: new full-speed USB device number 56 using xhci_hcd |
| [421584.641336] usb 1-8: New USB device found, idVendor=0483, idProduct=dada |
| [421584.641343] usb 1-8: New USB device strings: Mfr=1, Product=2, SerialNumber=3 |
| [421584.641348] usb 1-8: Product: SF100-ISP |
| [421584.641351] usb 1-8: Manufacturer: DediProg |
| [421584.641355] usb 1-8: SerialNumber: 20060104-001B |
| [422455.306000] usb 1-8: USB disconnect, device number 56 |
| [422458.602862] usb 1-8: new full-speed USB device number 57 using xhci_hcd |
| [422458.769783] usb 1-8: New USB device found, idVendor=0483, idProduct=dada |
| [422458.769792] usb 1-8: New USB device strings: Mfr=1, Product=2, SerialNumber=3 |
| [422458.769796] usb 1-8: Product: SF100-ISP |
| [422458.769800] usb 1-8: Manufacturer: DediProg |
| [422458.769803] usb 1-8: SerialNumber: 20060104-001C |
| [427495.056599] usb 1-8: USB disconnect, device number 57 |
| [427500.156330] usb 1-8: new full-speed USB device number 58 using xhci_hcd |
| [427500.323081] usb 1-8: New USB device found, idVendor=0483, idProduct=dada |
| [427500.323091] usb 1-8: New USB device strings: Mfr=1, Product=2, SerialNumber=3 |
| [427500.323096] usb 1-8: Product: SF100-ISP |
| [427500.323100] usb 1-8: Manufacturer: DediProg |
| [427500.323104] usb 1-8: SerialNumber: 20060104-001D |
| [427570.745346] usb 1-8: USB disconnect, device number 58 |
| [427573.907492] usb 1-8: new full-speed USB device number 59 using xhci_hcd |
| [427574.073998] usb 1-8: New USB device found, idVendor=0483, idProduct=dada |
| [427574.074008] usb 1-8: New USB device strings: Mfr=1, Product=2, SerialNumber=3 |
| [427574.074013] usb 1-8: Product: SF100-ISP |
| [427574.074017] usb 1-8: Manufacturer: DediProg |
| [427574.074021] usb 1-8: SerialNumber: 20060104-001E |
| [428888.295769] usb 1-8: USB disconnect, device number 59 |
| [428892.239594] usb 1-8: new full-speed USB device number 60 using xhci_hcd |
| [428892.406060] usb 1-8: New USB device found, idVendor=0483, idProduct=dada |
| [428892.406069] usb 1-8: New USB device strings: Mfr=1, Product=2, SerialNumber=3 |
| [428892.406074] usb 1-8: Product: SF100-ISP |
| [428892.406078] usb 1-8: Manufacturer: DediProg |
| [428892.406082] usb 1-8: SerialNumber: 20060104-001F |
| [432479.665483] usb 1-8: USB disconnect, device number 60 |
| [443014.968518] wlp1s0: deauthenticating from 9c:c1:72:10:42:7e by local choice (Reason: 3=DEAUTH_LEAVING) |
| [443014.976087] cfg80211: Calling CRDA to update world regulatory domain |
| [443014.990065] cfg80211: World regulatory domain updated: |
| [443014.990070] cfg80211: DFS Master region: unset |
| [443014.990072] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp), (dfs_cac_time) |
| [443014.990075] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (N/A, 2000 mBm), (N/A) |
| [443014.990078] cfg80211: (2457000 KHz - 2482000 KHz @ 40000 KHz), (N/A, 2000 mBm), (N/A) |
| [443014.990080] cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (N/A, 2000 mBm), (N/A) |
| [443014.990082] cfg80211: (5170000 KHz - 5250000 KHz @ 80000 KHz), (N/A, 2000 mBm), (N/A) |
| [443014.990084] cfg80211: (5735000 KHz - 5835000 KHz @ 80000 KHz), (N/A, 2000 mBm), (N/A) |
| [443014.990086] cfg80211: (57240000 KHz - 63720000 KHz @ 2160000 KHz), (N/A, 0 mBm), (N/A) |
| [443014.990108] cfg80211: Calling CRDA for country: IE |
| [443015.001530] cfg80211: Regulatory domain changed to country: IE |
| [443015.001536] cfg80211: DFS Master region: unset |
| [443015.001538] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp), (dfs_cac_time) |
| [443015.001541] cfg80211: (2402000 KHz - 2482000 KHz @ 40000 KHz), (N/A, 2000 mBm), (N/A) |
| [443015.001543] cfg80211: (5170000 KHz - 5250000 KHz @ 80000 KHz), (N/A, 2000 mBm), (N/A) |
| [443015.001546] cfg80211: (5250000 KHz - 5330000 KHz @ 80000 KHz), (N/A, 2000 mBm), (0 s) |
| [443015.001548] cfg80211: (5490000 KHz - 5710000 KHz @ 80000 KHz), (N/A, 2700 mBm), (0 s) |
| [443015.001550] cfg80211: (57240000 KHz - 65880000 KHz @ 2160000 KHz), (N/A, 4000 mBm), (N/A) |
| [443019.877503] PM: Syncing filesystems ... done. |
| [443019.906915] Freezing user space processes ... (elapsed 0.001 seconds) done. |
| [443019.908622] Freezing remaining freezable tasks ... (elapsed 0.001 seconds) done. |
| [443019.910007] Suspending console(s) (use no_console_suspend to debug) |
| [443020.012547] sd 0:0:0:0: [sda] Synchronizing SCSI cache |
| [443020.107477] sd 0:0:0:0: [sda] Stopping disk |
| [443020.769925] PM: suspend of devices complete after 859.917 msecs |
| [443020.787046] PM: late suspend of devices complete after 17.103 msecs |
| [443020.787892] xhci_hcd 0000:00:14.0: System wakeup enabled by ACPI |
| [443020.799101] PM: noirq suspend of devices complete after 12.053 msecs |
| [443020.799405] ACPI: Preparing to enter system sleep state S3 |
| [443020.799812] PM: Saving platform NVS memory |
| [443020.799813] Disabling non-boot CPUs ... |
| [443020.799879] intel_pstate CPU 1 exiting |
| [443020.800166] Broke affinity for irq 21 |
| [443020.800179] Broke affinity for irq 42 |
| [443020.801200] kvm: disabling virtualization on CPU1 |
| [443020.801212] smpboot: CPU 1 is now offline |
| [443020.803248] ACPI: Low-level resume complete |
| [443020.803310] PM: Restoring platform NVS memory |
| [443020.803717] Enabling non-boot CPUs ... |
| [443020.803764] x86: Booting SMP configuration: |
| [443020.803765] smpboot: Booting Node 0 Processor 1 APIC 0x2 |
| [443020.817187] CPU1 microcode updated early to revision 0x18, date = 2014-05-23 |
| [443020.818647] kvm: enabling virtualization on CPU1 |
| [443020.821070] CPU1 is up |
| [443020.822876] ACPI: Waking up from system sleep state S3 |
| [443020.833665] pci 0000:00:1d.0: Refused to change power state, currently in D3 |
| [443020.834652] xhci_hcd 0000:00:14.0: System wakeup disabled by ACPI |
| [443020.834790] PM: noirq resume of devices complete after 11.713 msecs |
| [443020.840730] PM: early resume of devices complete after 5.915 msecs |
| [443020.841015] snd_hda_intel 0000:00:03.0: irq 44 for MSI/MSI-X |
| [443020.841382] snd_hda_intel 0000:00:1b.0: irq 45 for MSI/MSI-X |
| [443020.841458] ath: phy0: ASPM enabled: 0x43 |
| [443020.841479] rtc_cmos 00:03: System wakeup disabled by ACPI |
| [443020.851618] sd 0:0:0:0: [sda] Starting disk |
| [443021.147902] usb 1-4: reset full-speed USB device number 51 using xhci_hcd |
| [443021.147917] xhci_hcd 0000:00:14.0: Setup ERROR: setup context command for slot 22. |
| [443021.147919] usb 1-4: hub failed to enable device, error -22 |
| [443021.156563] ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300) |
| [443021.157564] ata1.00: configured for UDMA/133 |
| [443021.300764] usb 1-4: reset full-speed USB device number 51 using xhci_hcd |
| [443021.300783] xhci_hcd 0000:00:14.0: Setup ERROR: setup context command for slot 22. |
| [443021.300786] usb 1-4: hub failed to enable device, error -22 |
| [443021.453661] usb 1-4: reset full-speed USB device number 51 using xhci_hcd |
| [443021.464980] usb 1-4: device firmware changed |
| [443021.617787] usb 1-3: reset high-speed USB device number 3 using xhci_hcd |
| [443021.617853] xhci_hcd 0000:00:14.0: Setup ERROR: setup context command for slot 2. |
| [443021.617857] usb 1-3: hub failed to enable device, error -22 |
| [443021.770603] usb 1-3: reset high-speed USB device number 3 using xhci_hcd |
| [443021.770627] xhci_hcd 0000:00:14.0: Setup ERROR: setup context command for slot 2. |
| [443021.770631] usb 1-3: hub failed to enable device, error -22 |
| [443021.923529] usb 1-3: reset high-speed USB device number 3 using xhci_hcd |
| [443021.983219] xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff880172e61f60 |
| [443021.985827] restoring control 00000000-0000-0000-0000-000000000101/10/5 |
| [443021.990490] PM: resume of devices complete after 1149.950 msecs |
| [443021.990859] Restarting tasks ... done. |
| [443022.012395] usb 1-4: USB disconnect, device number 51 |
| [443022.012919] xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff8800780c1a00 |
| [443022.012923] xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff8800780c1a90 |
| [443022.012926] xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff8800780c1a48 |
| [443022.012928] xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff880003ea1dc8 |
| [443022.012930] xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff880003ea1d80 |
| [443022.166352] usb 1-4: new full-speed USB device number 61 using xhci_hcd |
| [443022.331629] usb 1-4: string descriptor 0 malformed (err = -61), defaulting to 0x0409 |
| [443022.333511] usb 1-4: New USB device found, idVendor=0cf3, idProduct=311e |
| [443022.333515] usb 1-4: New USB device strings: Mfr=1, Product=2, SerialNumber=3 |
| [443022.374540] usb 1-4: USB disconnect, device number 61 |
| [443022.658286] usb 1-4: new full-speed USB device number 62 using xhci_hcd |
| [443022.823730] usb 1-4: string descriptor 0 malformed (err = -61), defaulting to 0x0409 |
| [443022.825654] usb 1-4: New USB device found, idVendor=0cf3, idProduct=311e |
| [443022.825660] usb 1-4: New USB device strings: Mfr=1, Product=2, SerialNumber=3 |
| [443028.242016] wlp1s0: authenticate with 9c:c1:72:10:42:7e |
| [443028.254696] wlp1s0: send auth to 9c:c1:72:10:42:7e (try 1/3) |
| [443028.256788] wlp1s0: authenticated |
| [443028.257260] wlp1s0: associate with 9c:c1:72:10:42:7e (try 1/3) |
| [443028.260947] wlp1s0: RX AssocResp from 9c:c1:72:10:42:7e (capab=0x411 status=0 aid=5) |
| [443028.261038] wlp1s0: associated |
| [443913.421575] wlp1s0: deauthenticating from 9c:c1:72:10:42:7e by local choice (Reason: 3=DEAUTH_LEAVING) |
| [443913.432115] cfg80211: Calling CRDA to update world regulatory domain |
| [443913.441748] cfg80211: World regulatory domain updated: |
| [443913.441755] cfg80211: DFS Master region: unset |
| [443913.441758] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp), (dfs_cac_time) |
| [443913.441763] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (N/A, 2000 mBm), (N/A) |
| [443913.441767] cfg80211: (2457000 KHz - 2482000 KHz @ 40000 KHz), (N/A, 2000 mBm), (N/A) |
| [443913.441769] cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (N/A, 2000 mBm), (N/A) |
| [443913.441772] cfg80211: (5170000 KHz - 5250000 KHz @ 80000 KHz), (N/A, 2000 mBm), (N/A) |
| [443913.441775] cfg80211: (5735000 KHz - 5835000 KHz @ 80000 KHz), (N/A, 2000 mBm), (N/A) |
| [443913.441778] cfg80211: (57240000 KHz - 63720000 KHz @ 2160000 KHz), (N/A, 0 mBm), (N/A) |
| [443913.442042] cfg80211: Calling CRDA for country: IE |
| [443913.453356] cfg80211: Regulatory domain changed to country: IE |
| [443913.453362] cfg80211: DFS Master region: unset |
| [443913.453365] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp), (dfs_cac_time) |
| [443913.453369] cfg80211: (2402000 KHz - 2482000 KHz @ 40000 KHz), (N/A, 2000 mBm), (N/A) |
| [443913.453373] cfg80211: (5170000 KHz - 5250000 KHz @ 80000 KHz), (N/A, 2000 mBm), (N/A) |
| [443913.453376] cfg80211: (5250000 KHz - 5330000 KHz @ 80000 KHz), (N/A, 2000 mBm), (0 s) |
| [443913.453378] cfg80211: (5490000 KHz - 5710000 KHz @ 80000 KHz), (N/A, 2700 mBm), (0 s) |
| [443913.453381] cfg80211: (57240000 KHz - 65880000 KHz @ 2160000 KHz), (N/A, 4000 mBm), (N/A) |
| [443918.328071] PM: Syncing filesystems ... done. |
| [443918.357574] Freezing user space processes ... (elapsed 0.001 seconds) done. |
| [443918.359343] Freezing remaining freezable tasks ... (elapsed 0.000 seconds) done. |
| [443918.360086] Suspending console(s) (use no_console_suspend to debug) |
| [443918.462285] sd 0:0:0:0: [sda] Synchronizing SCSI cache |
| [443918.462336] sd 0:0:0:0: [sda] Stopping disk |
| [443919.182012] PM: suspend of devices complete after 821.935 msecs |
| [443919.195008] PM: late suspend of devices complete after 12.977 msecs |
| [443919.195922] xhci_hcd 0000:00:14.0: System wakeup enabled by ACPI |
| [443919.207237] PM: noirq suspend of devices complete after 12.227 msecs |
| [443919.207632] ACPI: Preparing to enter system sleep state S3 |
| [443919.208121] PM: Saving platform NVS memory |
| [443919.208122] Disabling non-boot CPUs ... |
| [443919.208195] intel_pstate CPU 1 exiting |
| [443919.208495] Broke affinity for irq 42 |
| [443919.209518] kvm: disabling virtualization on CPU1 |
| [443919.209531] smpboot: CPU 1 is now offline |
| [443919.211569] ACPI: Low-level resume complete |
| [443919.211629] PM: Restoring platform NVS memory |
| [443919.212029] Enabling non-boot CPUs ... |
| [443919.212075] x86: Booting SMP configuration: |
| [443919.212077] smpboot: Booting Node 0 Processor 1 APIC 0x2 |
| [443919.225498] CPU1 microcode updated early to revision 0x18, date = 2014-05-23 |
| [443919.226957] kvm: enabling virtualization on CPU1 |
| [443919.229372] CPU1 is up |
| [443919.231178] ACPI: Waking up from system sleep state S3 |
| [443919.242664] pci 0000:00:1d.0: Refused to change power state, currently in D3 |
| [443919.242868] xhci_hcd 0000:00:14.0: System wakeup disabled by ACPI |
| [443919.242989] PM: noirq resume of devices complete after 11.612 msecs |
| [443919.248801] PM: early resume of devices complete after 5.787 msecs |
| [443919.249193] snd_hda_intel 0000:00:03.0: irq 44 for MSI/MSI-X |
| [443919.249449] snd_hda_intel 0000:00:1b.0: irq 45 for MSI/MSI-X |
| [443919.249516] rtc_cmos 00:03: System wakeup disabled by ACPI |
| [443919.249888] ath: phy0: ASPM enabled: 0x43 |
| [443919.259710] sd 0:0:0:0: [sda] Starting disk |
| [443919.556909] usb 1-3: reset high-speed USB device number 3 using xhci_hcd |
| [443919.557017] xhci_hcd 0000:00:14.0: Setup ERROR: setup context command for slot 2. |
| [443919.557021] usb 1-3: hub failed to enable device, error -22 |
| [443919.564639] ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300) |
| [443919.565523] ata1.00: configured for UDMA/133 |
| [443919.709709] usb 1-3: reset high-speed USB device number 3 using xhci_hcd |
| [443919.709854] xhci_hcd 0000:00:14.0: Setup ERROR: setup context command for slot 2. |
| [443919.709858] usb 1-3: hub failed to enable device, error -22 |
| [443919.862675] usb 1-3: reset high-speed USB device number 3 using xhci_hcd |
| [443919.922966] xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff880172e61f60 |
| [443919.925664] restoring control 00000000-0000-0000-0000-000000000101/10/5 |
| [443920.027891] usb 1-4: reset full-speed USB device number 62 using xhci_hcd |
| [443920.027958] xhci_hcd 0000:00:14.0: Setup ERROR: setup context command for slot 1. |
| [443920.027962] usb 1-4: hub failed to enable device, error -22 |
| [443920.180769] usb 1-4: reset full-speed USB device number 62 using xhci_hcd |
| [443920.180789] xhci_hcd 0000:00:14.0: Setup ERROR: setup context command for slot 1. |
| [443920.180792] usb 1-4: hub failed to enable device, error -22 |
| [443920.333599] usb 1-4: reset full-speed USB device number 62 using xhci_hcd |
| [443920.344987] usb 1-4: device firmware changed |
| [443920.345234] PM: resume of devices complete after 1096.630 msecs |
| [443920.345636] Restarting tasks ... done. |
| [443920.364444] usb 1-4: USB disconnect, device number 62 |
| [443920.365228] xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff88007a6e4e00 |
| [443920.365234] xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff88007a6e4e90 |
| [443920.365237] xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff88007a6e4e48 |
| [443920.365239] xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff8801756e5b88 |
| [443920.365242] xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff8801756e5b40 |
| [443920.518391] usb 1-4: new full-speed USB device number 63 using xhci_hcd |
| [443920.683671] usb 1-4: string descriptor 0 malformed (err = -61), defaulting to 0x0409 |
| [443920.685549] usb 1-4: New USB device found, idVendor=0cf3, idProduct=311e |
| [443920.685553] usb 1-4: New USB device strings: Mfr=1, Product=2, SerialNumber=3 |
| [443920.721504] usb 1-4: USB disconnect, device number 63 |
| [443921.006325] usb 1-4: new full-speed USB device number 64 using xhci_hcd |
| [443921.171970] usb 1-4: string descriptor 0 malformed (err = -61), defaulting to 0x0409 |
| [443921.174011] usb 1-4: New USB device found, idVendor=0cf3, idProduct=311e |
| [443921.174017] usb 1-4: New USB device strings: Mfr=1, Product=2, SerialNumber=3 |
| [443926.579361] wlp1s0: authenticate with 9c:c1:72:10:42:7e |
| [443926.592269] wlp1s0: send auth to 9c:c1:72:10:42:7e (try 1/3) |
| [443926.594862] wlp1s0: authenticated |
| [443926.595454] wlp1s0: associate with 9c:c1:72:10:42:7e (try 1/3) |
| [443926.599168] wlp1s0: RX AssocResp from 9c:c1:72:10:42:7e (capab=0x411 status=0 aid=4) |
| [443926.599284] wlp1s0: associated |
| [471560.929881] cfg80211: Calling CRDA to update world regulatory domain |
| [471560.941475] cfg80211: World regulatory domain updated: |
| [471560.941480] cfg80211: DFS Master region: unset |
| [471560.941482] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp), (dfs_cac_time) |
| [471560.941485] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (N/A, 2000 mBm), (N/A) |
| [471560.941488] cfg80211: (2457000 KHz - 2482000 KHz @ 40000 KHz), (N/A, 2000 mBm), (N/A) |
| [471560.941490] cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (N/A, 2000 mBm), (N/A) |
| [471560.941492] cfg80211: (5170000 KHz - 5250000 KHz @ 80000 KHz), (N/A, 2000 mBm), (N/A) |
| [471560.941494] cfg80211: (5735000 KHz - 5835000 KHz @ 80000 KHz), (N/A, 2000 mBm), (N/A) |
| [471560.941496] cfg80211: (57240000 KHz - 63720000 KHz @ 2160000 KHz), (N/A, 0 mBm), (N/A) |
| [471560.941515] cfg80211: Calling CRDA for country: IE |
| [471560.953427] cfg80211: Regulatory domain changed to country: IE |
| [471560.953432] cfg80211: DFS Master region: unset |
| [471560.953434] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp), (dfs_cac_time) |
| [471560.953437] cfg80211: (2402000 KHz - 2482000 KHz @ 40000 KHz), (N/A, 2000 mBm), (N/A) |
| [471560.953440] cfg80211: (5170000 KHz - 5250000 KHz @ 80000 KHz), (N/A, 2000 mBm), (N/A) |
| [471560.953442] cfg80211: (5250000 KHz - 5330000 KHz @ 80000 KHz), (N/A, 2000 mBm), (0 s) |
| [471560.953444] cfg80211: (5490000 KHz - 5710000 KHz @ 80000 KHz), (N/A, 2700 mBm), (0 s) |
| [471560.953446] cfg80211: (57240000 KHz - 65880000 KHz @ 2160000 KHz), (N/A, 4000 mBm), (N/A) |
| [471641.298319] wlp1s0: authenticate with 9c:c1:72:10:42:7e |
| [471641.311238] wlp1s0: send auth to 9c:c1:72:10:42:7e (try 1/3) |
| [471641.313225] wlp1s0: authenticated |
| [471641.313807] wlp1s0: associate with 9c:c1:72:10:42:7e (try 1/3) |
| [471641.317517] wlp1s0: RX AssocResp from 9c:c1:72:10:42:7e (capab=0x411 status=0 aid=3) |
| [471641.317604] wlp1s0: associated |
| [476207.410455] wlp1s0: deauthenticating from 9c:c1:72:10:42:7e by local choice (Reason: 3=DEAUTH_LEAVING) |
| [476207.424076] cfg80211: Calling CRDA to update world regulatory domain |
| [476207.426977] cfg80211: World regulatory domain updated: |
| [476207.426982] cfg80211: DFS Master region: unset |
| [476207.426984] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp), (dfs_cac_time) |
| [476207.426987] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (N/A, 2000 mBm), (N/A) |
| [476207.426990] cfg80211: (2457000 KHz - 2482000 KHz @ 40000 KHz), (N/A, 2000 mBm), (N/A) |
| [476207.426992] cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (N/A, 2000 mBm), (N/A) |
| [476207.426994] cfg80211: (5170000 KHz - 5250000 KHz @ 80000 KHz), (N/A, 2000 mBm), (N/A) |
| [476207.426996] cfg80211: (5735000 KHz - 5835000 KHz @ 80000 KHz), (N/A, 2000 mBm), (N/A) |
| [476207.426998] cfg80211: (57240000 KHz - 63720000 KHz @ 2160000 KHz), (N/A, 0 mBm), (N/A) |
| [476207.427116] cfg80211: Calling CRDA for country: IE |
| [476207.448751] cfg80211: Regulatory domain changed to country: IE |
| [476207.448756] cfg80211: DFS Master region: unset |
| [476207.448758] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp), (dfs_cac_time) |
| [476207.448761] cfg80211: (2402000 KHz - 2482000 KHz @ 40000 KHz), (N/A, 2000 mBm), (N/A) |
| [476207.448764] cfg80211: (5170000 KHz - 5250000 KHz @ 80000 KHz), (N/A, 2000 mBm), (N/A) |
| [476207.448766] cfg80211: (5250000 KHz - 5330000 KHz @ 80000 KHz), (N/A, 2000 mBm), (0 s) |
| [476207.448768] cfg80211: (5490000 KHz - 5710000 KHz @ 80000 KHz), (N/A, 2700 mBm), (0 s) |
| [476207.448770] cfg80211: (57240000 KHz - 65880000 KHz @ 2160000 KHz), (N/A, 4000 mBm), (N/A) |
| [476212.324007] PM: Syncing filesystems ... done. |
| [476212.349716] Freezing user space processes ... (elapsed 0.001 seconds) done. |
| [476212.351491] Freezing remaining freezable tasks ... (elapsed 0.001 seconds) done. |
| [476212.352589] Suspending console(s) (use no_console_suspend to debug) |
| [476212.454831] sd 0:0:0:0: [sda] Synchronizing SCSI cache |
| [476212.454883] sd 0:0:0:0: [sda] Stopping disk |
| [476213.260452] PM: suspend of devices complete after 907.832 msecs |
| [476213.275561] PM: late suspend of devices complete after 15.092 msecs |
| [476213.276462] xhci_hcd 0000:00:14.0: System wakeup enabled by ACPI |
| [476213.287655] PM: noirq suspend of devices complete after 12.090 msecs |
| [476213.288014] ACPI: Preparing to enter system sleep state S3 |
| [476213.288465] PM: Saving platform NVS memory |
| [476213.288467] Disabling non-boot CPUs ... |
| [476213.288512] intel_pstate CPU 1 exiting |
| [476213.288821] Broke affinity for irq 21 |
| [476213.288834] Broke affinity for irq 41 |
| [476213.288836] Broke affinity for irq 42 |
| [476213.289861] kvm: disabling virtualization on CPU1 |
| [476213.289876] smpboot: CPU 1 is now offline |
| [476213.291918] ACPI: Low-level resume complete |
| [476213.291978] PM: Restoring platform NVS memory |
| [476213.292368] Enabling non-boot CPUs ... |
| [476213.292414] x86: Booting SMP configuration: |
| [476213.292415] smpboot: Booting Node 0 Processor 1 APIC 0x2 |
| [476213.305833] CPU1 microcode updated early to revision 0x18, date = 2014-05-23 |
| [476213.307292] kvm: enabling virtualization on CPU1 |
| [476213.309723] CPU1 is up |
| [476213.311529] ACPI: Waking up from system sleep state S3 |
| [476213.322221] pci 0000:00:1d.0: Refused to change power state, currently in D3 |
| [476213.323185] xhci_hcd 0000:00:14.0: System wakeup disabled by ACPI |
| [476213.323317] PM: noirq resume of devices complete after 11.623 msecs |
| [476213.329271] PM: early resume of devices complete after 5.928 msecs |
| [476213.329553] snd_hda_intel 0000:00:03.0: irq 44 for MSI/MSI-X |
| [476213.329920] snd_hda_intel 0000:00:1b.0: irq 45 for MSI/MSI-X |
| [476213.329988] rtc_cmos 00:03: System wakeup disabled by ACPI |
| [476213.330362] ath: phy0: ASPM enabled: 0x43 |
| [476213.340162] sd 0:0:0:0: [sda] Starting disk |
| [476213.637322] usb 1-3: reset high-speed USB device number 3 using xhci_hcd |
| [476213.637337] xhci_hcd 0000:00:14.0: Setup ERROR: setup context command for slot 2. |
| [476213.637339] usb 1-3: hub failed to enable device, error -22 |
| [476213.645063] ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300) |
| [476213.645697] ata1.00: configured for UDMA/133 |
| [476213.790227] usb 1-3: reset high-speed USB device number 3 using xhci_hcd |
| [476213.790253] xhci_hcd 0000:00:14.0: Setup ERROR: setup context command for slot 2. |
| [476213.790256] usb 1-3: hub failed to enable device, error -22 |
| [476213.943225] usb 1-3: reset high-speed USB device number 3 using xhci_hcd |
| [476214.003121] xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff880172e61f60 |
| [476214.005594] restoring control 00000000-0000-0000-0000-000000000101/10/5 |
| [476214.108215] usb 1-4: reset full-speed USB device number 64 using xhci_hcd |
| [476214.108231] xhci_hcd 0000:00:14.0: Setup ERROR: setup context command for slot 7. |
| [476214.108234] usb 1-4: hub failed to enable device, error -22 |
| [476214.261101] usb 1-4: reset full-speed USB device number 64 using xhci_hcd |
| [476214.261167] xhci_hcd 0000:00:14.0: Setup ERROR: setup context command for slot 7. |
| [476214.261171] usb 1-4: hub failed to enable device, error -22 |
| [476214.414145] usb 1-4: reset full-speed USB device number 64 using xhci_hcd |
| [476214.425452] usb 1-4: device firmware changed |
| [476214.425709] PM: resume of devices complete after 1096.617 msecs |
| [476214.426109] Restarting tasks ... |
| [476214.441917] usb 1-4: USB disconnect, device number 64 |
| [476214.441978] done. |
| [476214.442408] xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff880142ffe200 |
| [476214.442413] xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff880142ffe290 |
| [476214.442416] xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff880142ffe248 |
| [476214.442419] xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff88012cc60888 |
| [476214.442422] xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff88012cc60840 |
| [476214.599924] usb 1-4: new full-speed USB device number 65 using xhci_hcd |
| [476214.765377] usb 1-4: string descriptor 0 malformed (err = -61), defaulting to 0x0409 |
| [476214.767263] usb 1-4: New USB device found, idVendor=0cf3, idProduct=311e |
| [476214.767267] usb 1-4: New USB device strings: Mfr=1, Product=2, SerialNumber=3 |
| [476214.809635] usb 1-4: USB disconnect, device number 65 |
| [476215.095898] usb 1-4: new full-speed USB device number 66 using xhci_hcd |
| [476215.261182] usb 1-4: string descriptor 0 malformed (err = -61), defaulting to 0x0409 |
| [476215.263088] usb 1-4: New USB device found, idVendor=0cf3, idProduct=311e |
| [476215.263093] usb 1-4: New USB device strings: Mfr=1, Product=2, SerialNumber=3 |
| [476220.707772] wlp1s0: authenticate with 9c:c1:72:10:42:7e |
| [476220.720875] wlp1s0: send auth to 9c:c1:72:10:42:7e (try 1/3) |
| [476220.723298] wlp1s0: authenticated |
| [476220.723917] wlp1s0: associate with 9c:c1:72:10:42:7e (try 1/3) |
| [476220.727645] wlp1s0: RX AssocResp from 9c:c1:72:10:42:7e (capab=0x411 status=0 aid=5) |
| [476220.727752] wlp1s0: associated |
| [478037.957930] traps: polkitd[30676] general protection ip:7fb503da0cf2 sp:7fff93c50130 error:0 in libmozjs-17.0.so[7fb503c62000+3b3000] |
| [479501.170714] wlp1s0: deauthenticating from 9c:c1:72:10:42:7e by local choice (Reason: 3=DEAUTH_LEAVING) |
| [479501.179062] cfg80211: Calling CRDA to update world regulatory domain |
| [479501.186742] cfg80211: World regulatory domain updated: |
| [479501.186747] cfg80211: DFS Master region: unset |
| [479501.186749] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp), (dfs_cac_time) |
| [479501.186752] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (N/A, 2000 mBm), (N/A) |
| [479501.186755] cfg80211: (2457000 KHz - 2482000 KHz @ 40000 KHz), (N/A, 2000 mBm), (N/A) |
| [479501.186757] cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (N/A, 2000 mBm), (N/A) |
| [479501.186758] cfg80211: (5170000 KHz - 5250000 KHz @ 80000 KHz), (N/A, 2000 mBm), (N/A) |
| [479501.186760] cfg80211: (5735000 KHz - 5835000 KHz @ 80000 KHz), (N/A, 2000 mBm), (N/A) |
| [479501.186763] cfg80211: (57240000 KHz - 63720000 KHz @ 2160000 KHz), (N/A, 0 mBm), (N/A) |
| [479501.186826] cfg80211: Calling CRDA for country: IE |
| [479501.199453] cfg80211: Regulatory domain changed to country: IE |
| [479501.199458] cfg80211: DFS Master region: unset |
| [479501.199460] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp), (dfs_cac_time) |
| [479501.199463] cfg80211: (2402000 KHz - 2482000 KHz @ 40000 KHz), (N/A, 2000 mBm), (N/A) |
| [479501.199466] cfg80211: (5170000 KHz - 5250000 KHz @ 80000 KHz), (N/A, 2000 mBm), (N/A) |
| [479501.199468] cfg80211: (5250000 KHz - 5330000 KHz @ 80000 KHz), (N/A, 2000 mBm), (0 s) |
| [479501.199470] cfg80211: (5490000 KHz - 5710000 KHz @ 80000 KHz), (N/A, 2700 mBm), (0 s) |
| [479501.199472] cfg80211: (57240000 KHz - 65880000 KHz @ 2160000 KHz), (N/A, 4000 mBm), (N/A) |
| [479506.077399] PM: Syncing filesystems ... done. |
| [479506.093521] Freezing user space processes ... (elapsed 0.001 seconds) done. |
| [479506.095246] Freezing remaining freezable tasks ... (elapsed 0.000 seconds) done. |
| [479506.096182] Suspending console(s) (use no_console_suspend to debug) |
| [479506.198401] sd 0:0:0:0: [sda] Synchronizing SCSI cache |
| [479506.198463] sd 0:0:0:0: [sda] Stopping disk |
| [479506.774138] PM: suspend of devices complete after 677.950 msecs |
| [479506.793133] PM: late suspend of devices complete after 18.979 msecs |
| [479506.793939] xhci_hcd 0000:00:14.0: System wakeup enabled by ACPI |
| [479506.805173] PM: noirq suspend of devices complete after 12.037 msecs |
| [479506.805502] ACPI: Preparing to enter system sleep state S3 |
| [479506.805927] PM: Saving platform NVS memory |
| [479506.805928] Disabling non-boot CPUs ... |
| [479506.805987] intel_pstate CPU 1 exiting |
| [479506.806257] Broke affinity for irq 42 |
| [479506.807277] kvm: disabling virtualization on CPU1 |
| [479506.807288] smpboot: CPU 1 is now offline |
| [479506.809189] ACPI: Low-level resume complete |
| [479506.809250] PM: Restoring platform NVS memory |
| [479506.809661] Enabling non-boot CPUs ... |
| [479506.809706] x86: Booting SMP configuration: |
| [479506.809708] smpboot: Booting Node 0 Processor 1 APIC 0x2 |
| [479506.823128] CPU1 microcode updated early to revision 0x18, date = 2014-05-23 |
| [479506.824586] kvm: enabling virtualization on CPU1 |
| [479506.827017] CPU1 is up |
| [479506.828824] ACPI: Waking up from system sleep state S3 |
| [479506.839670] pci 0000:00:1d.0: Refused to change power state, currently in D3 |
| [479506.840728] xhci_hcd 0000:00:14.0: System wakeup disabled by ACPI |
| [479506.840863] PM: noirq resume of devices complete after 11.837 msecs |
| [479506.846820] PM: early resume of devices complete after 5.931 msecs |
| [479506.847105] snd_hda_intel 0000:00:03.0: irq 44 for MSI/MSI-X |
| [479506.847469] snd_hda_intel 0000:00:1b.0: irq 45 for MSI/MSI-X |
| [479506.847544] ath: phy0: ASPM enabled: 0x43 |
| [479506.847565] rtc_cmos 00:03: System wakeup disabled by ACPI |
| [479506.857726] sd 0:0:0:0: [sda] Starting disk |
| [479507.153884] usb 1-3: reset high-speed USB device number 3 using xhci_hcd |
| [479507.153900] xhci_hcd 0000:00:14.0: Setup ERROR: setup context command for slot 2. |
| [479507.153902] usb 1-3: hub failed to enable device, error -22 |
| [479507.162643] ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300) |
| [479507.163512] ata1.00: configured for UDMA/133 |
| [479507.306731] usb 1-3: reset high-speed USB device number 3 using xhci_hcd |
| [479507.306751] xhci_hcd 0000:00:14.0: Setup ERROR: setup context command for slot 2. |
| [479507.306754] usb 1-3: hub failed to enable device, error -22 |
| [479507.459735] usb 1-3: reset high-speed USB device number 3 using xhci_hcd |
| [479507.519440] xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff880172e61f60 |
| [479507.522024] restoring control 00000000-0000-0000-0000-000000000101/10/5 |
| [479507.624878] usb 1-4: reset full-speed USB device number 66 using xhci_hcd |
| [479507.624945] xhci_hcd 0000:00:14.0: Setup ERROR: setup context command for slot 3. |
| [479507.624949] usb 1-4: hub failed to enable device, error -22 |
| [479507.777643] usb 1-4: reset full-speed USB device number 66 using xhci_hcd |
| [479507.777666] xhci_hcd 0000:00:14.0: Setup ERROR: setup context command for slot 3. |
| [479507.777669] usb 1-4: hub failed to enable device, error -22 |
| [479507.930587] usb 1-4: reset full-speed USB device number 66 using xhci_hcd |
| [479507.941988] usb 1-4: device firmware changed |
| [479507.942235] PM: resume of devices complete after 1095.632 msecs |
| [479507.942638] Restarting tasks ... done. |
| [479507.957453] usb 1-4: USB disconnect, device number 66 |
| [479507.957951] xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff8800782e9b00 |
| [479507.957955] xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff8800782e9b90 |
| [479507.957958] xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff8800782e9b48 |
| [479507.957961] xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff88007b3f6408 |
| [479507.957964] xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff88007b3f63c0 |
| [479508.111384] usb 1-4: new full-speed USB device number 67 using xhci_hcd |
| [479508.276649] usb 1-4: string descriptor 0 malformed (err = -61), defaulting to 0x0409 |
| [479508.278566] usb 1-4: New USB device found, idVendor=0cf3, idProduct=311e |
| [479508.278571] usb 1-4: New USB device strings: Mfr=1, Product=2, SerialNumber=3 |
| [479508.314801] usb 1-4: USB disconnect, device number 67 |
| [479508.598360] usb 1-4: new full-speed USB device number 68 using xhci_hcd |
| [479508.763585] usb 1-4: string descriptor 0 malformed (err = -61), defaulting to 0x0409 |
| [479508.765480] usb 1-4: New USB device found, idVendor=0cf3, idProduct=311e |
| [479508.765485] usb 1-4: New USB device strings: Mfr=1, Product=2, SerialNumber=3 |
| [479514.189103] wlp1s0: authenticate with 9c:c1:72:10:42:7e |
| [479514.202174] wlp1s0: send auth to 9c:c1:72:10:42:7e (try 1/3) |
| [479514.204226] wlp1s0: authenticated |
| [479514.205183] wlp1s0: associate with 9c:c1:72:10:42:7e (try 1/3) |
| [479514.208989] wlp1s0: RX AssocResp from 9c:c1:72:10:42:7e (capab=0x411 status=0 aid=3) |
| [479514.209095] wlp1s0: associated |
| [499163.923452] cfg80211: Calling CRDA to update world regulatory domain |
| [499163.929377] cfg80211: World regulatory domain updated: |
| [499163.929382] cfg80211: DFS Master region: unset |
| [499163.929384] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp), (dfs_cac_time) |
| [499163.929388] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (N/A, 2000 mBm), (N/A) |
| [499163.929390] cfg80211: (2457000 KHz - 2482000 KHz @ 40000 KHz), (N/A, 2000 mBm), (N/A) |
| [499163.929392] cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (N/A, 2000 mBm), (N/A) |
| [499163.929394] cfg80211: (5170000 KHz - 5250000 KHz @ 80000 KHz), (N/A, 2000 mBm), (N/A) |
| [499163.929396] cfg80211: (5735000 KHz - 5835000 KHz @ 80000 KHz), (N/A, 2000 mBm), (N/A) |
| [499163.929398] cfg80211: (57240000 KHz - 63720000 KHz @ 2160000 KHz), (N/A, 0 mBm), (N/A) |
| [499163.929418] cfg80211: Calling CRDA for country: IE |
| [499163.940988] cfg80211: Regulatory domain changed to country: IE |
| [499163.940993] cfg80211: DFS Master region: unset |
| [499163.940994] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp), (dfs_cac_time) |
| [499163.940998] cfg80211: (2402000 KHz - 2482000 KHz @ 40000 KHz), (N/A, 2000 mBm), (N/A) |
| [499163.941000] cfg80211: (5170000 KHz - 5250000 KHz @ 80000 KHz), (N/A, 2000 mBm), (N/A) |
| [499163.941002] cfg80211: (5250000 KHz - 5330000 KHz @ 80000 KHz), (N/A, 2000 mBm), (0 s) |
| [499163.941004] cfg80211: (5490000 KHz - 5710000 KHz @ 80000 KHz), (N/A, 2700 mBm), (0 s) |
| [499163.941007] cfg80211: (57240000 KHz - 65880000 KHz @ 2160000 KHz), (N/A, 4000 mBm), (N/A) |
| [499167.045380] wlp1s0: authenticate with 9c:c1:72:10:42:7e |
| [499167.058089] wlp1s0: send auth to 9c:c1:72:10:42:7e (try 1/3) |
| [499167.186956] wlp1s0: send auth to 9c:c1:72:10:42:7e (try 2/3) |
| [499167.307437] wlp1s0: send auth to 9c:c1:72:10:42:7e (try 3/3) |
| [499167.438229] wlp1s0: authentication with 9c:c1:72:10:42:7e timed out |
| [499244.317878] wlp1s0: authenticate with 9c:c1:72:10:42:7e |
| [499244.330710] wlp1s0: send auth to 9c:c1:72:10:42:7e (try 1/3) |
| [499244.332688] wlp1s0: authenticated |
| [499244.332989] wlp1s0: associate with 9c:c1:72:10:42:7e (try 1/3) |
| [499244.336774] wlp1s0: RX AssocResp from 9c:c1:72:10:42:7e (capab=0x411 status=0 aid=2) |
| [499244.336870] wlp1s0: associated |
| [516338.168989] wlp1s0: deauthenticating from 9c:c1:72:10:42:7e by local choice (Reason: 3=DEAUTH_LEAVING) |
| [516338.176968] cfg80211: Calling CRDA to update world regulatory domain |
| [516338.181040] cfg80211: World regulatory domain updated: |
| [516338.181048] cfg80211: DFS Master region: unset |
| [516338.181051] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp), (dfs_cac_time) |
| [516338.181056] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (N/A, 2000 mBm), (N/A) |
| [516338.181060] cfg80211: (2457000 KHz - 2482000 KHz @ 40000 KHz), (N/A, 2000 mBm), (N/A) |
| [516338.181064] cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (N/A, 2000 mBm), (N/A) |
| [516338.181067] cfg80211: (5170000 KHz - 5250000 KHz @ 80000 KHz), (N/A, 2000 mBm), (N/A) |
| [516338.181070] cfg80211: (5735000 KHz - 5835000 KHz @ 80000 KHz), (N/A, 2000 mBm), (N/A) |
| [516338.181073] cfg80211: (57240000 KHz - 63720000 KHz @ 2160000 KHz), (N/A, 0 mBm), (N/A) |
| [516338.181101] cfg80211: Calling CRDA for country: IE |
| [516338.196451] cfg80211: Regulatory domain changed to country: IE |
| [516338.196458] cfg80211: DFS Master region: unset |
| [516338.196460] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp), (dfs_cac_time) |
| [516338.196464] cfg80211: (2402000 KHz - 2482000 KHz @ 40000 KHz), (N/A, 2000 mBm), (N/A) |
| [516338.196467] cfg80211: (5170000 KHz - 5250000 KHz @ 80000 KHz), (N/A, 2000 mBm), (N/A) |
| [516338.196470] cfg80211: (5250000 KHz - 5330000 KHz @ 80000 KHz), (N/A, 2000 mBm), (0 s) |
| [516338.196473] cfg80211: (5490000 KHz - 5710000 KHz @ 80000 KHz), (N/A, 2700 mBm), (0 s) |
| [516338.196475] cfg80211: (57240000 KHz - 65880000 KHz @ 2160000 KHz), (N/A, 4000 mBm), (N/A) |
| [516343.074452] PM: Syncing filesystems ... done. |
| [516343.091973] Freezing user space processes ... (elapsed 0.001 seconds) done. |
| [516343.093688] Freezing remaining freezable tasks ... (elapsed 0.001 seconds) done. |
| [516343.094936] Suspending console(s) (use no_console_suspend to debug) |
| [516343.197290] sd 0:0:0:0: [sda] Synchronizing SCSI cache |
| [516343.197333] sd 0:0:0:0: [sda] Stopping disk |
| [516343.834020] PM: suspend of devices complete after 739.064 msecs |
| [516343.845062] PM: late suspend of devices complete after 11.034 msecs |
| [516343.846083] xhci_hcd 0000:00:14.0: System wakeup enabled by ACPI |
| [516343.857262] PM: noirq suspend of devices complete after 12.197 msecs |
| [516343.857701] ACPI: Preparing to enter system sleep state S3 |
| [516343.858236] PM: Saving platform NVS memory |
| [516343.858238] Disabling non-boot CPUs ... |
| [516343.858296] intel_pstate CPU 1 exiting |
| [516343.858624] Broke affinity for irq 41 |
| [516343.858626] Broke affinity for irq 42 |
| [516343.859653] kvm: disabling virtualization on CPU1 |
| [516343.859670] smpboot: CPU 1 is now offline |
| [516343.861836] ACPI: Low-level resume complete |
| [516343.861897] PM: Restoring platform NVS memory |
| [516343.862297] Enabling non-boot CPUs ... |
| [516343.862342] x86: Booting SMP configuration: |
| [516343.862344] smpboot: Booting Node 0 Processor 1 APIC 0x2 |
| [516343.875767] CPU1 microcode updated early to revision 0x18, date = 2014-05-23 |
| [516343.877227] kvm: enabling virtualization on CPU1 |
| [516343.879659] CPU1 is up |
| [516343.881484] ACPI: Waking up from system sleep state S3 |
| [516343.892743] pci 0000:00:1d.0: Refused to change power state, currently in D3 |
| [516343.893021] xhci_hcd 0000:00:14.0: System wakeup disabled by ACPI |
| [516343.893180] PM: noirq resume of devices complete after 11.552 msecs |
| [516343.898861] PM: early resume of devices complete after 5.656 msecs |
| [516343.899264] snd_hda_intel 0000:00:03.0: irq 44 for MSI/MSI-X |
| [516343.899524] snd_hda_intel 0000:00:1b.0: irq 45 for MSI/MSI-X |
| [516343.899590] rtc_cmos 00:03: System wakeup disabled by ACPI |
| [516343.899983] ath: phy0: ASPM enabled: 0x43 |
| [516343.909763] sd 0:0:0:0: [sda] Starting disk |
| [516344.206977] usb 1-3: reset high-speed USB device number 3 using xhci_hcd |
| [516344.207088] xhci_hcd 0000:00:14.0: Setup ERROR: setup context command for slot 2. |
| [516344.207091] usb 1-3: hub failed to enable device, error -22 |
| [516344.214699] ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300) |
| [516344.215431] ata1.00: configured for UDMA/133 |
| [516344.359782] usb 1-3: reset high-speed USB device number 3 using xhci_hcd |
| [516344.359848] xhci_hcd 0000:00:14.0: Setup ERROR: setup context command for slot 2. |
| [516344.359853] usb 1-3: hub failed to enable device, error -22 |
| [516344.512749] usb 1-3: reset high-speed USB device number 3 using xhci_hcd |
| [516344.572803] xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff880172e61f60 |
| [516344.575613] restoring control 00000000-0000-0000-0000-000000000101/10/5 |
| [516344.677946] usb 1-4: reset full-speed USB device number 68 using xhci_hcd |
| [516344.678014] xhci_hcd 0000:00:14.0: Setup ERROR: setup context command for slot 9. |
| [516344.678018] usb 1-4: hub failed to enable device, error -22 |
| [516344.830718] usb 1-4: reset full-speed USB device number 68 using xhci_hcd |
| [516344.830739] xhci_hcd 0000:00:14.0: Setup ERROR: setup context command for slot 9. |
| [516344.830742] usb 1-4: hub failed to enable device, error -22 |
| [516344.983632] usb 1-4: reset full-speed USB device number 68 using xhci_hcd |
| [516344.994800] usb 1-4: device firmware changed |
| [516344.994934] PM: resume of devices complete after 1096.254 msecs |
| [516344.995168] Restarting tasks ... done. |
| [516345.010506] usb 1-4: USB disconnect, device number 68 |
| [516345.010919] xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff880103f22a00 |
| [516345.010923] xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff880103f22a90 |
| [516345.010925] xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff880103f22a48 |
| [516345.010927] xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff88002551ff48 |
| [516345.010930] xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff88002551ff00 |
| [516345.165529] usb 1-4: new full-speed USB device number 69 using xhci_hcd |
| [516345.330927] usb 1-4: string descriptor 0 malformed (err = -61), defaulting to 0x0409 |
| [516345.332785] usb 1-4: New USB device found, idVendor=0cf3, idProduct=311e |
| [516345.332789] usb 1-4: New USB device strings: Mfr=1, Product=2, SerialNumber=3 |
| [516345.369562] usb 1-4: USB disconnect, device number 69 |
| [516345.656421] usb 1-4: new full-speed USB device number 70 using xhci_hcd |
| [516345.821761] usb 1-4: string descriptor 0 malformed (err = -61), defaulting to 0x0409 |
| [516345.823883] usb 1-4: New USB device found, idVendor=0cf3, idProduct=311e |
| [516345.823887] usb 1-4: New USB device strings: Mfr=1, Product=2, SerialNumber=3 |
| [516351.212466] wlp1s0: authenticate with 9c:c1:72:10:42:7e |
| [516351.224913] wlp1s0: send auth to 9c:c1:72:10:42:7e (try 1/3) |
| [516351.226864] wlp1s0: authenticated |
| [516351.227504] wlp1s0: associate with 9c:c1:72:10:42:7e (try 1/3) |
| [516351.231235] wlp1s0: RX AssocResp from 9c:c1:72:10:42:7e (capab=0x411 status=0 aid=2) |
| [516351.231342] wlp1s0: associated |
| [586801.704302] systemd-journald[347]: Vacuuming done, freed 0 bytes |
| [594899.875216] cfg80211: Calling CRDA to update world regulatory domain |
| [594899.886855] cfg80211: World regulatory domain updated: |
| [594899.886859] cfg80211: DFS Master region: unset |
| [594899.886861] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp), (dfs_cac_time) |
| [594899.886865] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (N/A, 2000 mBm), (N/A) |
| [594899.886867] cfg80211: (2457000 KHz - 2482000 KHz @ 40000 KHz), (N/A, 2000 mBm), (N/A) |
| [594899.886869] cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (N/A, 2000 mBm), (N/A) |
| [594899.886871] cfg80211: (5170000 KHz - 5250000 KHz @ 80000 KHz), (N/A, 2000 mBm), (N/A) |
| [594899.886873] cfg80211: (5735000 KHz - 5835000 KHz @ 80000 KHz), (N/A, 2000 mBm), (N/A) |
| [594899.886876] cfg80211: (57240000 KHz - 63720000 KHz @ 2160000 KHz), (N/A, 0 mBm), (N/A) |
| [594899.886894] cfg80211: Calling CRDA for country: IE |
| [594899.901441] cfg80211: Regulatory domain changed to country: IE |
| [594899.901446] cfg80211: DFS Master region: unset |
| [594899.901448] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp), (dfs_cac_time) |
| [594899.901451] cfg80211: (2402000 KHz - 2482000 KHz @ 40000 KHz), (N/A, 2000 mBm), (N/A) |
| [594899.901454] cfg80211: (5170000 KHz - 5250000 KHz @ 80000 KHz), (N/A, 2000 mBm), (N/A) |
| [594899.901456] cfg80211: (5250000 KHz - 5330000 KHz @ 80000 KHz), (N/A, 2000 mBm), (0 s) |
| [594899.901458] cfg80211: (5490000 KHz - 5710000 KHz @ 80000 KHz), (N/A, 2700 mBm), (0 s) |
| [594899.901461] cfg80211: (57240000 KHz - 65880000 KHz @ 2160000 KHz), (N/A, 4000 mBm), (N/A) |
| [594902.990212] wlp1s0: authenticate with 9c:c1:72:10:42:7e |
| [594903.003587] wlp1s0: send auth to 9c:c1:72:10:42:7e (try 1/3) |
| [594903.136587] wlp1s0: send auth to 9c:c1:72:10:42:7e (try 2/3) |
| [594903.233970] wlp1s0: send auth to 9c:c1:72:10:42:7e (try 3/3) |
| [594903.329478] wlp1s0: authentication with 9c:c1:72:10:42:7e timed out |
| [594980.282016] wlp1s0: authenticate with 9c:c1:72:10:42:7e |
| [594980.293646] wlp1s0: send auth to 9c:c1:72:10:42:7e (try 1/3) |
| [594980.295591] wlp1s0: authenticated |
| [594980.296010] wlp1s0: associate with 9c:c1:72:10:42:7e (try 1/3) |
| [594980.299739] wlp1s0: RX AssocResp from 9c:c1:72:10:42:7e (capab=0x411 status=0 aid=4) |
| [594980.299824] wlp1s0: associated |
| [600977.680587] wlp1s0: deauthenticating from 9c:c1:72:10:42:7e by local choice (Reason: 3=DEAUTH_LEAVING) |
| [600977.692940] cfg80211: Calling CRDA to update world regulatory domain |
| [600977.697192] cfg80211: World regulatory domain updated: |
| [600977.697198] cfg80211: DFS Master region: unset |
| [600977.697200] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp), (dfs_cac_time) |
| [600977.697203] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (N/A, 2000 mBm), (N/A) |
| [600977.697206] cfg80211: (2457000 KHz - 2482000 KHz @ 40000 KHz), (N/A, 2000 mBm), (N/A) |
| [600977.697208] cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (N/A, 2000 mBm), (N/A) |
| [600977.697210] cfg80211: (5170000 KHz - 5250000 KHz @ 80000 KHz), (N/A, 2000 mBm), (N/A) |
| [600977.697212] cfg80211: (5735000 KHz - 5835000 KHz @ 80000 KHz), (N/A, 2000 mBm), (N/A) |
| [600977.697214] cfg80211: (57240000 KHz - 63720000 KHz @ 2160000 KHz), (N/A, 0 mBm), (N/A) |
| [600977.697278] cfg80211: Calling CRDA for country: IE |
| [600977.704683] cfg80211: Regulatory domain changed to country: IE |
| [600977.704688] cfg80211: DFS Master region: unset |
| [600977.704690] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp), (dfs_cac_time) |
| [600977.704694] cfg80211: (2402000 KHz - 2482000 KHz @ 40000 KHz), (N/A, 2000 mBm), (N/A) |
| [600977.704696] cfg80211: (5170000 KHz - 5250000 KHz @ 80000 KHz), (N/A, 2000 mBm), (N/A) |
| [600977.704699] cfg80211: (5250000 KHz - 5330000 KHz @ 80000 KHz), (N/A, 2000 mBm), (0 s) |
| [600977.704701] cfg80211: (5490000 KHz - 5710000 KHz @ 80000 KHz), (N/A, 2700 mBm), (0 s) |
| [600977.704703] cfg80211: (57240000 KHz - 65880000 KHz @ 2160000 KHz), (N/A, 4000 mBm), (N/A) |
| [600982.590554] PM: Syncing filesystems ... done. |
| [600982.606899] Freezing user space processes ... (elapsed 0.001 seconds) done. |
| [600982.608360] Freezing remaining freezable tasks ... (elapsed 0.000 seconds) done. |
| [600982.609367] Suspending console(s) (use no_console_suspend to debug) |
| [600982.711713] sd 0:0:0:0: [sda] Synchronizing SCSI cache |
| [600982.711784] sd 0:0:0:0: [sda] Stopping disk |
| [600983.270303] PM: suspend of devices complete after 660.904 msecs |
| [600983.285280] PM: late suspend of devices complete after 14.973 msecs |
| [600983.285950] xhci_hcd 0000:00:14.0: System wakeup enabled by ACPI |
| [600983.296572] PM: noirq suspend of devices complete after 11.291 msecs |
| [600983.296855] ACPI: Preparing to enter system sleep state S3 |
| [600983.297239] PM: Saving platform NVS memory |
| [600983.297240] Disabling non-boot CPUs ... |
| [600983.297293] intel_pstate CPU 1 exiting |
| [600983.297530] Broke affinity for irq 21 |
| [600983.297542] Broke affinity for irq 42 |
| [600983.298559] kvm: disabling virtualization on CPU1 |
| [600983.298568] smpboot: CPU 1 is now offline |
| [600983.300366] ACPI: Low-level resume complete |
| [600983.300427] PM: Restoring platform NVS memory |
| [600983.300871] Enabling non-boot CPUs ... |
| [600983.300919] x86: Booting SMP configuration: |
| [600983.300920] smpboot: Booting Node 0 Processor 1 APIC 0x2 |
| [600983.314346] CPU1 microcode updated early to revision 0x18, date = 2014-05-23 |
| [600983.315805] kvm: enabling virtualization on CPU1 |
| [600983.318228] CPU1 is up |
| [600983.320037] ACPI: Waking up from system sleep state S3 |
| [600983.330842] pci 0000:00:1d.0: Refused to change power state, currently in D3 |
| [600983.331830] xhci_hcd 0000:00:14.0: System wakeup disabled by ACPI |
| [600983.331977] PM: noirq resume of devices complete after 11.750 msecs |
| [600983.337975] PM: early resume of devices complete after 5.972 msecs |
| [600983.338264] snd_hda_intel 0000:00:03.0: irq 44 for MSI/MSI-X |
| [600983.338520] snd_hda_intel 0000:00:1b.0: irq 45 for MSI/MSI-X |
| [600983.338703] rtc_cmos 00:03: System wakeup disabled by ACPI |
| [600983.339077] ath: phy0: ASPM enabled: 0x43 |
| [600983.348865] sd 0:0:0:0: [sda] Starting disk |
| [600983.646105] usb 1-3: reset high-speed USB device number 3 using xhci_hcd |
| [600983.646120] xhci_hcd 0000:00:14.0: Setup ERROR: setup context command for slot 2. |
| [600983.646122] usb 1-3: hub failed to enable device, error -22 |
| [600983.653775] ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300) |
| [600983.654460] ata1.00: configured for UDMA/133 |
| [600983.798935] usb 1-3: reset high-speed USB device number 3 using xhci_hcd |
| [600983.798958] xhci_hcd 0000:00:14.0: Setup ERROR: setup context command for slot 2. |
| [600983.798962] usb 1-3: hub failed to enable device, error -22 |
| [600983.951856] usb 1-3: reset high-speed USB device number 3 using xhci_hcd |
| [600984.012055] xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff880172e61f60 |
| [600984.014768] restoring control 00000000-0000-0000-0000-000000000101/10/5 |
| [600984.117097] usb 1-4: reset full-speed USB device number 70 using xhci_hcd |
| [600984.117122] xhci_hcd 0000:00:14.0: Setup ERROR: setup context command for slot 11. |
| [600984.117126] usb 1-4: hub failed to enable device, error -22 |
| [600984.269806] usb 1-4: reset full-speed USB device number 70 using xhci_hcd |
| [600984.269872] xhci_hcd 0000:00:14.0: Setup ERROR: setup context command for slot 11. |
| [600984.269877] usb 1-4: hub failed to enable device, error -22 |
| [600984.422801] usb 1-4: reset full-speed USB device number 70 using xhci_hcd |
| [600984.434129] usb 1-4: device firmware changed |
| [600984.434356] PM: resume of devices complete after 1096.561 msecs |
| [600984.434751] Restarting tasks ... done. |
| [600984.450758] usb 1-4: USB disconnect, device number 70 |
| [600984.453188] xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff88004b147b00 |
| [600984.453194] xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff88004b147b90 |
| [600984.453197] xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff88004b147b48 |
| [600984.453200] xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff880173151108 |
| [600984.453203] xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff8801731510c0 |
| [600984.606591] usb 1-4: new full-speed USB device number 71 using xhci_hcd |
| [600984.772568] usb 1-4: string descriptor 0 malformed (err = -61), defaulting to 0x0409 |
| [600984.776023] usb 1-4: New USB device found, idVendor=0cf3, idProduct=311e |
| [600984.776029] usb 1-4: New USB device strings: Mfr=1, Product=2, SerialNumber=3 |
| [600984.813286] usb 1-4: USB disconnect, device number 71 |
| [600985.098511] usb 1-4: new full-speed USB device number 72 using xhci_hcd |
| [600985.263684] usb 1-4: string descriptor 0 malformed (err = -61), defaulting to 0x0409 |
| [600985.265672] usb 1-4: New USB device found, idVendor=0cf3, idProduct=311e |
| [600985.265678] usb 1-4: New USB device strings: Mfr=1, Product=2, SerialNumber=3 |
| [600990.700130] wlp1s0: authenticate with 9c:c1:72:10:42:7e |
| [600990.711333] wlp1s0: send auth to 9c:c1:72:10:42:7e (try 1/3) |
| [600990.713995] wlp1s0: authenticated |
| [600990.714721] wlp1s0: associate with 9c:c1:72:10:42:7e (try 1/3) |
| [600990.718468] wlp1s0: RX AssocResp from 9c:c1:72:10:42:7e (capab=0x411 status=0 aid=4) |
| [600990.718570] wlp1s0: associated |
| [601722.337322] traps: polkitd[27103] general protection ip:7f7024bb4cf2 sp:7fff9c31a5f0 error:0 in libmozjs-17.0.so[7f7024a76000+3b3000] |
| [637176.853879] polkitd[5484]: segfault at 15 ip 00007fee23c109bd sp 00007fffe22725d0 error 4 in libmozjs-17.0.so[7fee23b14000+3b3000] |
| [675520.120730] polkitd[5353]: segfault at 15 ip 00007fc2f429d9bd sp 00007fff91109760 error 4 in libmozjs-17.0.so[7fc2f41a1000+3b3000] |
| [675526.811283] device vnet0 entered promiscuous mode |
| [675526.819361] virbr0: port 2(vnet0) entered listening state |
| [675526.819371] virbr0: port 2(vnet0) entered listening state |
| [675526.974022] virbr0: port 2(vnet0) entered disabled state |
| [675526.976046] device vnet0 left promiscuous mode |
| [675526.976094] virbr0: port 2(vnet0) entered disabled state |
| [678512.793037] device vnet0 entered promiscuous mode |
| [678512.802030] virbr0: port 2(vnet0) entered listening state |
| [678512.802040] virbr0: port 2(vnet0) entered listening state |
| [678514.807369] virbr0: port 2(vnet0) entered learning state |
| [678515.403637] qemu-kvm[31636]: segfault at 7fb209274520 ip 00007fb202489850 sp 00007fffb5444dd8 error 4 in libpixman-1.so.0.32.4[7fb202431000+a5000] |
| [678516.811018] virbr0: topology change detected, propagating |
| [678516.811028] virbr0: port 2(vnet0) entered forwarding state |
| [678519.109023] virbr0: port 2(vnet0) entered disabled state |
| [678519.110056] device vnet0 left promiscuous mode |
| [678519.110079] virbr0: port 2(vnet0) entered disabled state |
| [678532.493510] device vnet0 entered promiscuous mode |
| [678532.501520] virbr0: port 2(vnet0) entered listening state |
| [678532.501534] virbr0: port 2(vnet0) entered listening state |
| [678534.507956] virbr0: port 2(vnet0) entered learning state |
| [678536.511606] virbr0: topology change detected, propagating |
| [678536.511618] virbr0: port 2(vnet0) entered forwarding state |
| [678539.809955] kvm [32414]: vcpu0 disabled perfctr wrmsr: 0xc1 data 0xabcd |
| [709164.672851] polkitd[29550]: segfault at 15 ip 00007f1e4ca2f9bd sp 00007fff4f314c50 error 4 in libmozjs-17.0.so[7f1e4c933000+3b3000] |
| [728300.520068] traps: polkitd[8617] general protection ip:7f63dc1dccf2 sp:7fff3cdaae30 error:0 in libmozjs-17.0.so[7f63dc09e000+3b3000] |
| [769694.127785] polkitd[14290]: segfault at 15 ip 00007f465323d9bd sp 00007fff4b387ac0 error 4 in libmozjs-17.0.so[7f4653141000+3b3000] |
| [804487.247535] polkitd[1284]: segfault at 15 ip 00007f116ed649bd sp 00007fffdc4a0270 error 4 in libmozjs-17.0.so[7f116ec68000+3b3000] |
| [809518.558673] cfg80211: Calling CRDA to update world regulatory domain |
| [809518.575496] cfg80211: World regulatory domain updated: |
| [809518.575502] cfg80211: DFS Master region: unset |
| [809518.575505] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp), (dfs_cac_time) |
| [809518.575509] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (N/A, 2000 mBm), (N/A) |
| [809518.575512] cfg80211: (2457000 KHz - 2482000 KHz @ 40000 KHz), (N/A, 2000 mBm), (N/A) |
| [809518.575515] cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (N/A, 2000 mBm), (N/A) |
| [809518.575517] cfg80211: (5170000 KHz - 5250000 KHz @ 80000 KHz), (N/A, 2000 mBm), (N/A) |
| [809518.575519] cfg80211: (5735000 KHz - 5835000 KHz @ 80000 KHz), (N/A, 2000 mBm), (N/A) |
| [809518.575522] cfg80211: (57240000 KHz - 63720000 KHz @ 2160000 KHz), (N/A, 0 mBm), (N/A) |
| [809518.575545] cfg80211: Calling CRDA for country: IE |
| [809518.583194] cfg80211: Regulatory domain changed to country: IE |
| [809518.583199] cfg80211: DFS Master region: unset |
| [809518.583201] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp), (dfs_cac_time) |
| [809518.583205] cfg80211: (2402000 KHz - 2482000 KHz @ 40000 KHz), (N/A, 2000 mBm), (N/A) |
| [809518.583208] cfg80211: (5170000 KHz - 5250000 KHz @ 80000 KHz), (N/A, 2000 mBm), (N/A) |
| [809518.583210] cfg80211: (5250000 KHz - 5330000 KHz @ 80000 KHz), (N/A, 2000 mBm), (0 s) |
| [809518.583212] cfg80211: (5490000 KHz - 5710000 KHz @ 80000 KHz), (N/A, 2700 mBm), (0 s) |
| [809518.583215] cfg80211: (57240000 KHz - 65880000 KHz @ 2160000 KHz), (N/A, 4000 mBm), (N/A) |
| [809521.683769] wlp1s0: authenticate with 9c:c1:72:10:42:7e |
| [809521.696446] wlp1s0: send auth to 9c:c1:72:10:42:7e (try 1/3) |
| [809521.698745] wlp1s0: authenticated |
| [809521.699749] wlp1s0: associate with 9c:c1:72:10:42:7e (try 1/3) |
| [809521.703527] wlp1s0: RX AssocResp from 9c:c1:72:10:42:7e (capab=0x411 status=0 aid=1) |
| [809521.703620] wlp1s0: associated |
| [841081.861229] polkitd[19878]: segfault at 15 ip 00007f24c88879bd sp 00007fff9d22d7b0 error 4 in libmozjs-17.0.so[7f24c878b000+3b3000] |
| [843957.872208] virbr0: port 2(vnet0) entered disabled state |
| [843957.873000] device vnet0 left promiscuous mode |
| [843957.873038] virbr0: port 2(vnet0) entered disabled state |
| [852035.491596] EXT4-fs (dm-15): mounted filesystem without journal. Opts: (null) |
| [853390.076944] cbfstool[19199]: segfault at 7fd1671197d0 ip 00007fd240ab9c27 sp 00007fffe220cc98 error 4 in libc-2.17.so[7fd240987000+1b6000] |
| [853525.696870] cbfstool[19323]: segfault at 7fa972a427d0 ip 00007faa4c3e2c27 sp 00007fff4bd386d8 error 4 in libc-2.17.so[7faa4c2b0000+1b6000] |
| [854556.082960] device vnet0 entered promiscuous mode |
| [854556.087940] virbr0: port 2(vnet0) entered listening state |
| [854556.087956] virbr0: port 2(vnet0) entered listening state |
| [854558.090414] virbr0: port 2(vnet0) entered learning state |
| [854558.868664] qemu-kvm[20468]: segfault at 7f4e08f95750 ip 00007f4e01d6f850 sp 00007fff0c198948 error 4 in libpixman-1.so.0.32.4[7f4e01d17000+a5000] |
| [854560.094051] virbr0: topology change detected, propagating |
| [854560.094064] virbr0: port 2(vnet0) entered forwarding state |
| [854562.472570] virbr0: port 2(vnet0) entered disabled state |
| [854562.474013] device vnet0 left promiscuous mode |
| [854562.474052] virbr0: port 2(vnet0) entered disabled state |
| [854567.798802] device vnet0 entered promiscuous mode |
| [854567.802792] virbr0: port 2(vnet0) entered listening state |
| [854567.802804] virbr0: port 2(vnet0) entered listening state |
| [854569.808308] virbr0: port 2(vnet0) entered learning state |
| [854569.930627] qemu-kvm[20631]: segfault at 7f224dd1fc70 ip 00007f224730a850 sp 00007fffd503fb38 error 4 in libpixman-1.so.0.32.4[7f22472b2000+a5000] |
| [854569.965922] virbr0: port 2(vnet0) entered disabled state |
| [854569.966856] device vnet0 left promiscuous mode |
| [854569.966883] virbr0: port 2(vnet0) entered disabled state |
| [854581.882295] device vnet0 entered promiscuous mode |
| [854581.892307] virbr0: port 2(vnet0) entered listening state |
| [854581.892318] virbr0: port 2(vnet0) entered listening state |
| [854583.893786] virbr0: port 2(vnet0) entered learning state |
| [854585.897415] virbr0: topology change detected, propagating |
| [854585.897433] virbr0: port 2(vnet0) entered forwarding state |
| [854588.565468] kvm [21395]: vcpu0 disabled perfctr wrmsr: 0xc1 data 0xabcd |
| [854791.574409] wlp1s0: deauthenticating from 9c:c1:72:10:42:7e by local choice (Reason: 3=DEAUTH_LEAVING) |
| [854791.581755] cfg80211: Calling CRDA to update world regulatory domain |
| [854791.602735] cfg80211: World regulatory domain updated: |
| [854791.602741] cfg80211: DFS Master region: unset |
| [854791.602744] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp), (dfs_cac_time) |
| [854791.602748] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (N/A, 2000 mBm), (N/A) |
| [854791.602751] cfg80211: (2457000 KHz - 2482000 KHz @ 40000 KHz), (N/A, 2000 mBm), (N/A) |
| [854791.602754] cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (N/A, 2000 mBm), (N/A) |
| [854791.602756] cfg80211: (5170000 KHz - 5250000 KHz @ 80000 KHz), (N/A, 2000 mBm), (N/A) |
| [854791.602759] cfg80211: (5735000 KHz - 5835000 KHz @ 80000 KHz), (N/A, 2000 mBm), (N/A) |
| [854791.602762] cfg80211: (57240000 KHz - 63720000 KHz @ 2160000 KHz), (N/A, 0 mBm), (N/A) |
| [854791.602821] cfg80211: Calling CRDA for country: IE |
| [854791.615099] cfg80211: Regulatory domain changed to country: IE |
| [854791.615106] cfg80211: DFS Master region: unset |
| [854791.615109] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp), (dfs_cac_time) |
| [854791.615113] cfg80211: (2402000 KHz - 2482000 KHz @ 40000 KHz), (N/A, 2000 mBm), (N/A) |
| [854791.615116] cfg80211: (5170000 KHz - 5250000 KHz @ 80000 KHz), (N/A, 2000 mBm), (N/A) |
| [854791.615119] cfg80211: (5250000 KHz - 5330000 KHz @ 80000 KHz), (N/A, 2000 mBm), (0 s) |
| [854791.615121] cfg80211: (5490000 KHz - 5710000 KHz @ 80000 KHz), (N/A, 2700 mBm), (0 s) |
| [854791.615124] cfg80211: (57240000 KHz - 65880000 KHz @ 2160000 KHz), (N/A, 4000 mBm), (N/A) |
| [854793.728661] PM: Syncing filesystems ... done. |
| [854793.747770] Freezing user space processes ... (elapsed 0.001 seconds) done. |
| [854793.749499] Freezing remaining freezable tasks ... (elapsed 0.000 seconds) done. |
| [854793.750374] Suspending console(s) (use no_console_suspend to debug) |
| [854793.853126] sd 0:0:0:0: [sda] Synchronizing SCSI cache |
| [854793.853188] sd 0:0:0:0: [sda] Stopping disk |
| [854794.496323] PM: suspend of devices complete after 745.927 msecs |
| [854794.507306] PM: late suspend of devices complete after 10.975 msecs |
| [854794.508328] xhci_hcd 0000:00:14.0: System wakeup enabled by ACPI |
| [854794.519655] PM: noirq suspend of devices complete after 12.346 msecs |
| [854794.520093] ACPI: Preparing to enter system sleep state S3 |
| [854794.520627] PM: Saving platform NVS memory |
| [854794.520628] Disabling non-boot CPUs ... |
| [854794.520706] intel_pstate CPU 1 exiting |
| [854794.521047] Broke affinity for irq 21 |
| [854794.521061] Broke affinity for irq 42 |
| [854794.522086] kvm: disabling virtualization on CPU1 |
| [854794.522106] smpboot: CPU 1 is now offline |
| [854794.524261] ACPI: Low-level resume complete |
| [854794.524321] PM: Restoring platform NVS memory |
| [854794.524712] Enabling non-boot CPUs ... |
| [854794.524758] x86: Booting SMP configuration: |
| [854794.524759] smpboot: Booting Node 0 Processor 1 APIC 0x2 |
| [854794.538176] CPU1 microcode updated early to revision 0x18, date = 2014-05-23 |
| [854794.539634] kvm: enabling virtualization on CPU1 |
| [854794.542077] CPU1 is up |
| [854794.543902] ACPI: Waking up from system sleep state S3 |
| [854794.554981] pci 0000:00:1d.0: Refused to change power state, currently in D3 |
| [854794.556011] xhci_hcd 0000:00:14.0: System wakeup disabled by ACPI |
| [854794.556155] PM: noirq resume of devices complete after 12.108 msecs |
| [854794.562174] PM: early resume of devices complete after 5.995 msecs |
| [854794.562422] snd_hda_intel 0000:00:03.0: irq 44 for MSI/MSI-X |
| [854794.562878] snd_hda_intel 0000:00:1b.0: irq 45 for MSI/MSI-X |
| [854794.562951] ath: phy0: ASPM enabled: 0x43 |
| [854794.562984] rtc_cmos 00:03: System wakeup disabled by ACPI |
| [854794.573057] sd 0:0:0:0: [sda] Starting disk |
| [854794.870250] usb 1-3: reset high-speed USB device number 3 using xhci_hcd |
| [854794.870304] xhci_hcd 0000:00:14.0: Setup ERROR: setup context command for slot 2. |
| [854794.870316] usb 1-3: hub failed to enable device, error -22 |
| [854794.877949] ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300) |
| [854794.878498] ata1.00: configured for UDMA/133 |
| [854795.023087] usb 1-3: reset high-speed USB device number 3 using xhci_hcd |
| [854795.023153] xhci_hcd 0000:00:14.0: Setup ERROR: setup context command for slot 2. |
| [854795.023158] usb 1-3: hub failed to enable device, error -22 |
| [854795.176044] usb 1-3: reset high-speed USB device number 3 using xhci_hcd |
| [854795.236381] xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff880172e61f60 |
| [854795.238930] restoring control 00000000-0000-0000-0000-000000000101/10/5 |
| [854795.341108] usb 1-4: reset full-speed USB device number 72 using xhci_hcd |
| [854795.341125] xhci_hcd 0000:00:14.0: Setup ERROR: setup context command for slot 13. |
| [854795.341128] usb 1-4: hub failed to enable device, error -22 |
| [854795.493976] usb 1-4: reset full-speed USB device number 72 using xhci_hcd |
| [854795.494110] xhci_hcd 0000:00:14.0: Setup ERROR: setup context command for slot 13. |
| [854795.494114] usb 1-4: hub failed to enable device, error -22 |
| [854795.646983] usb 1-4: reset full-speed USB device number 72 using xhci_hcd |
| [854795.658314] usb 1-4: device firmware changed |
| [854795.658560] PM: resume of devices complete after 1096.574 msecs |
| [854795.658968] Restarting tasks ... done. |
| [854795.676848] usb 1-4: USB disconnect, device number 72 |
| [854795.677405] xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff8800780c3100 |
| [854795.677410] xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff8800780c3190 |
| [854795.677413] xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff8800780c3148 |
| [854795.677416] xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff880172809c48 |
| [854795.677419] xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff880172809c00 |
| [854795.831802] usb 1-4: new full-speed USB device number 73 using xhci_hcd |
| [854795.997199] usb 1-4: string descriptor 0 malformed (err = -61), defaulting to 0x0409 |
| [854795.999160] usb 1-4: New USB device found, idVendor=0cf3, idProduct=311e |
| [854795.999165] usb 1-4: New USB device strings: Mfr=1, Product=2, SerialNumber=3 |
| [854796.037730] usb 1-4: USB disconnect, device number 73 |
| [854796.321820] usb 1-4: new full-speed USB device number 74 using xhci_hcd |
| [854796.487006] usb 1-4: string descriptor 0 malformed (err = -61), defaulting to 0x0409 |
| [854796.489111] usb 1-4: New USB device found, idVendor=0cf3, idProduct=311e |
| [854796.489116] usb 1-4: New USB device strings: Mfr=1, Product=2, SerialNumber=3 |
| [854801.944166] wlp1s0: authenticate with 9c:c1:72:10:42:7e |
| [854801.957162] wlp1s0: send auth to 9c:c1:72:10:42:7e (try 1/3) |
| [854801.961863] wlp1s0: authenticated |
| [854801.962693] wlp1s0: associate with 9c:c1:72:10:42:7e (try 1/3) |
| [854802.039033] wlp1s0: RX AssocResp from 9c:c1:72:10:42:7e (capab=0x411 status=0 aid=5) |
| [854802.039117] wlp1s0: associated |
| [854918.590054] cfg80211: Calling CRDA to update world regulatory domain |
| [854918.593545] cfg80211: World regulatory domain updated: |
| [854918.593551] cfg80211: DFS Master region: unset |
| [854918.593553] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp), (dfs_cac_time) |
| [854918.593557] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (N/A, 2000 mBm), (N/A) |
| [854918.593560] cfg80211: (2457000 KHz - 2482000 KHz @ 40000 KHz), (N/A, 2000 mBm), (N/A) |
| [854918.593563] cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (N/A, 2000 mBm), (N/A) |
| [854918.593565] cfg80211: (5170000 KHz - 5250000 KHz @ 80000 KHz), (N/A, 2000 mBm), (N/A) |
| [854918.593567] cfg80211: (5735000 KHz - 5835000 KHz @ 80000 KHz), (N/A, 2000 mBm), (N/A) |
| [854918.593570] cfg80211: (57240000 KHz - 63720000 KHz @ 2160000 KHz), (N/A, 0 mBm), (N/A) |
| [854918.593598] cfg80211: Calling CRDA for country: IE |
| [854918.608780] cfg80211: Regulatory domain changed to country: IE |
| [854918.608785] cfg80211: DFS Master region: unset |
| [854918.608787] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp), (dfs_cac_time) |
| [854918.608790] cfg80211: (2402000 KHz - 2482000 KHz @ 40000 KHz), (N/A, 2000 mBm), (N/A) |
| [854918.608793] cfg80211: (5170000 KHz - 5250000 KHz @ 80000 KHz), (N/A, 2000 mBm), (N/A) |
| [854918.608796] cfg80211: (5250000 KHz - 5330000 KHz @ 80000 KHz), (N/A, 2000 mBm), (0 s) |
| [854918.608798] cfg80211: (5490000 KHz - 5710000 KHz @ 80000 KHz), (N/A, 2700 mBm), (0 s) |
| [854918.608800] cfg80211: (57240000 KHz - 65880000 KHz @ 2160000 KHz), (N/A, 4000 mBm), (N/A) |
| [854940.098381] wlp1s0: authenticate with 9c:c1:72:10:42:7e |
| [854940.111029] wlp1s0: send auth to 9c:c1:72:10:42:7e (try 1/3) |
| [854940.113056] wlp1s0: authenticated |
| [854940.113574] wlp1s0: associate with 9c:c1:72:10:42:7e (try 1/3) |
| [854940.234591] wlp1s0: associate with 9c:c1:72:10:42:7e (try 2/3) |
| [854940.238401] wlp1s0: RX AssocResp from 9c:c1:72:10:42:7e (capab=0x411 status=0 aid=5) |
| [854940.238525] wlp1s0: associated |
| [854984.571064] cfg80211: Calling CRDA to update world regulatory domain |
| [854984.575276] cfg80211: World regulatory domain updated: |
| [854984.575282] cfg80211: DFS Master region: unset |
| [854984.575284] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp), (dfs_cac_time) |
| [854984.575288] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (N/A, 2000 mBm), (N/A) |
| [854984.575292] cfg80211: (2457000 KHz - 2482000 KHz @ 40000 KHz), (N/A, 2000 mBm), (N/A) |
| [854984.575294] cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (N/A, 2000 mBm), (N/A) |
| [854984.575297] cfg80211: (5170000 KHz - 5250000 KHz @ 80000 KHz), (N/A, 2000 mBm), (N/A) |
| [854984.575299] cfg80211: (5735000 KHz - 5835000 KHz @ 80000 KHz), (N/A, 2000 mBm), (N/A) |
| [854984.575302] cfg80211: (57240000 KHz - 63720000 KHz @ 2160000 KHz), (N/A, 0 mBm), (N/A) |
| [854984.575327] cfg80211: Calling CRDA for country: IE |
| [854984.584665] cfg80211: Regulatory domain changed to country: IE |
| [854984.584671] cfg80211: DFS Master region: unset |
| [854984.584673] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp), (dfs_cac_time) |
| [854984.584677] cfg80211: (2402000 KHz - 2482000 KHz @ 40000 KHz), (N/A, 2000 mBm), (N/A) |
| [854984.584680] cfg80211: (5170000 KHz - 5250000 KHz @ 80000 KHz), (N/A, 2000 mBm), (N/A) |
| [854984.584683] cfg80211: (5250000 KHz - 5330000 KHz @ 80000 KHz), (N/A, 2000 mBm), (0 s) |
| [854984.584685] cfg80211: (5490000 KHz - 5710000 KHz @ 80000 KHz), (N/A, 2700 mBm), (0 s) |
| [854984.584688] cfg80211: (57240000 KHz - 65880000 KHz @ 2160000 KHz), (N/A, 4000 mBm), (N/A) |
| [854987.704586] wlp1s0: authenticate with 9c:c1:72:10:42:7e |
| [854987.717603] wlp1s0: send auth to 9c:c1:72:10:42:7e (try 1/3) |
| [854987.826910] wlp1s0: send auth to 9c:c1:72:10:42:7e (try 2/3) |
| [854987.840024] wlp1s0: authenticated |
| [854987.841071] wlp1s0: associate with 9c:c1:72:10:42:7e (try 1/3) |
| [854988.141862] wlp1s0: associate with 9c:c1:72:10:42:7e (try 2/3) |
| [854988.154377] wlp1s0: RX AssocResp from 9c:c1:72:10:42:7e (capab=0x411 status=0 aid=5) |
| [854988.154478] wlp1s0: associated |
| [855034.555084] cfg80211: Calling CRDA to update world regulatory domain |
| [855034.558799] cfg80211: World regulatory domain updated: |
| [855034.558804] cfg80211: DFS Master region: unset |
| [855034.558806] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp), (dfs_cac_time) |
| [855034.558810] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (N/A, 2000 mBm), (N/A) |
| [855034.558812] cfg80211: (2457000 KHz - 2482000 KHz @ 40000 KHz), (N/A, 2000 mBm), (N/A) |
| [855034.558815] cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (N/A, 2000 mBm), (N/A) |
| [855034.558817] cfg80211: (5170000 KHz - 5250000 KHz @ 80000 KHz), (N/A, 2000 mBm), (N/A) |
| [855034.558819] cfg80211: (5735000 KHz - 5835000 KHz @ 80000 KHz), (N/A, 2000 mBm), (N/A) |
| [855034.558821] cfg80211: (57240000 KHz - 63720000 KHz @ 2160000 KHz), (N/A, 0 mBm), (N/A) |
| [855034.558843] cfg80211: Calling CRDA for country: IE |
| [855034.569213] cfg80211: Regulatory domain changed to country: IE |
| [855034.569218] cfg80211: DFS Master region: unset |
| [855034.569220] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp), (dfs_cac_time) |
| [855034.569223] cfg80211: (2402000 KHz - 2482000 KHz @ 40000 KHz), (N/A, 2000 mBm), (N/A) |
| [855034.569226] cfg80211: (5170000 KHz - 5250000 KHz @ 80000 KHz), (N/A, 2000 mBm), (N/A) |
| [855034.569228] cfg80211: (5250000 KHz - 5330000 KHz @ 80000 KHz), (N/A, 2000 mBm), (0 s) |
| [855034.569230] cfg80211: (5490000 KHz - 5710000 KHz @ 80000 KHz), (N/A, 2700 mBm), (0 s) |
| [855034.569232] cfg80211: (57240000 KHz - 65880000 KHz @ 2160000 KHz), (N/A, 4000 mBm), (N/A) |
| [855037.686719] wlp1s0: authenticate with 9c:c1:72:10:42:7e |
| [855037.699587] wlp1s0: send auth to 9c:c1:72:10:42:7e (try 1/3) |
| [855037.701586] wlp1s0: authenticated |
| [855037.701935] wlp1s0: associate with 9c:c1:72:10:42:7e (try 1/3) |
| [855037.705711] wlp1s0: RX AssocResp from 9c:c1:72:10:42:7e (capab=0x411 status=0 aid=5) |
| [855037.705805] wlp1s0: associated |
| [855141.505281] cfg80211: Calling CRDA to update world regulatory domain |
| [855141.508755] cfg80211: World regulatory domain updated: |
| [855141.508760] cfg80211: DFS Master region: unset |
| [855141.508763] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp), (dfs_cac_time) |
| [855141.508766] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (N/A, 2000 mBm), (N/A) |
| [855141.508769] cfg80211: (2457000 KHz - 2482000 KHz @ 40000 KHz), (N/A, 2000 mBm), (N/A) |
| [855141.508771] cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (N/A, 2000 mBm), (N/A) |
| [855141.508773] cfg80211: (5170000 KHz - 5250000 KHz @ 80000 KHz), (N/A, 2000 mBm), (N/A) |
| [855141.508775] cfg80211: (5735000 KHz - 5835000 KHz @ 80000 KHz), (N/A, 2000 mBm), (N/A) |
| [855141.508778] cfg80211: (57240000 KHz - 63720000 KHz @ 2160000 KHz), (N/A, 0 mBm), (N/A) |
| [855141.508800] cfg80211: Calling CRDA for country: IE |
| [855141.527546] cfg80211: Regulatory domain changed to country: IE |
| [855141.527550] cfg80211: DFS Master region: unset |
| [855141.527552] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp), (dfs_cac_time) |
| [855141.527556] cfg80211: (2402000 KHz - 2482000 KHz @ 40000 KHz), (N/A, 2000 mBm), (N/A) |
| [855141.527558] cfg80211: (5170000 KHz - 5250000 KHz @ 80000 KHz), (N/A, 2000 mBm), (N/A) |
| [855141.527561] cfg80211: (5250000 KHz - 5330000 KHz @ 80000 KHz), (N/A, 2000 mBm), (0 s) |
| [855141.527563] cfg80211: (5490000 KHz - 5710000 KHz @ 80000 KHz), (N/A, 2700 mBm), (0 s) |
| [855141.527565] cfg80211: (57240000 KHz - 65880000 KHz @ 2160000 KHz), (N/A, 4000 mBm), (N/A) |
| [855152.658394] wlp1s0: authenticate with 9c:c1:72:10:42:7e |
| [855152.671590] wlp1s0: send auth to 9c:c1:72:10:42:7e (try 1/3) |
| [855152.681753] wlp1s0: authenticated |
| [855152.682884] wlp1s0: associate with 9c:c1:72:10:42:7e (try 1/3) |
| [855152.824711] wlp1s0: associate with 9c:c1:72:10:42:7e (try 2/3) |
| [855152.828611] wlp1s0: RX AssocResp from 9c:c1:72:10:42:7e (capab=0x411 status=0 aid=5) |
| [855152.828759] wlp1s0: associated |
| [855240.460606] cfg80211: Calling CRDA to update world regulatory domain |
| [855240.464740] cfg80211: World regulatory domain updated: |
| [855240.464745] cfg80211: DFS Master region: unset |
| [855240.464747] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp), (dfs_cac_time) |
| [855240.464751] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (N/A, 2000 mBm), (N/A) |
| [855240.464754] cfg80211: (2457000 KHz - 2482000 KHz @ 40000 KHz), (N/A, 2000 mBm), (N/A) |
| [855240.464756] cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (N/A, 2000 mBm), (N/A) |
| [855240.464758] cfg80211: (5170000 KHz - 5250000 KHz @ 80000 KHz), (N/A, 2000 mBm), (N/A) |
| [855240.464760] cfg80211: (5735000 KHz - 5835000 KHz @ 80000 KHz), (N/A, 2000 mBm), (N/A) |
| [855240.464763] cfg80211: (57240000 KHz - 63720000 KHz @ 2160000 KHz), (N/A, 0 mBm), (N/A) |
| [855240.464786] cfg80211: Calling CRDA for country: IE |
| [855240.477135] cfg80211: Regulatory domain changed to country: IE |
| [855240.477140] cfg80211: DFS Master region: unset |
| [855240.477142] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp), (dfs_cac_time) |
| [855240.477145] cfg80211: (2402000 KHz - 2482000 KHz @ 40000 KHz), (N/A, 2000 mBm), (N/A) |
| [855240.477147] cfg80211: (5170000 KHz - 5250000 KHz @ 80000 KHz), (N/A, 2000 mBm), (N/A) |
| [855240.477150] cfg80211: (5250000 KHz - 5330000 KHz @ 80000 KHz), (N/A, 2000 mBm), (0 s) |
| [855240.477152] cfg80211: (5490000 KHz - 5710000 KHz @ 80000 KHz), (N/A, 2700 mBm), (0 s) |
| [855240.477154] cfg80211: (57240000 KHz - 65880000 KHz @ 2160000 KHz), (N/A, 4000 mBm), (N/A) |
| [855251.621203] wlp1s0: authenticate with 9c:c1:72:10:42:7e |
| [855251.634009] wlp1s0: send auth to 9c:c1:72:10:42:7e (try 1/3) |
| [855251.635997] wlp1s0: authenticated |
| [855251.636274] wlp1s0: associate with 9c:c1:72:10:42:7e (try 1/3) |
| [855251.640235] wlp1s0: RX AssocResp from 9c:c1:72:10:42:7e (capab=0x411 status=0 aid=5) |
| [855251.640369] wlp1s0: associated |
| [855645.392398] cfg80211: Calling CRDA to update world regulatory domain |
| [855645.395395] cfg80211: World regulatory domain updated: |
| [855645.395400] cfg80211: DFS Master region: unset |
| [855645.395402] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp), (dfs_cac_time) |
| [855645.395406] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (N/A, 2000 mBm), (N/A) |
| [855645.395408] cfg80211: (2457000 KHz - 2482000 KHz @ 40000 KHz), (N/A, 2000 mBm), (N/A) |
| [855645.395410] cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (N/A, 2000 mBm), (N/A) |
| [855645.395412] cfg80211: (5170000 KHz - 5250000 KHz @ 80000 KHz), (N/A, 2000 mBm), (N/A) |
| [855645.395414] cfg80211: (5735000 KHz - 5835000 KHz @ 80000 KHz), (N/A, 2000 mBm), (N/A) |
| [855645.395416] cfg80211: (57240000 KHz - 63720000 KHz @ 2160000 KHz), (N/A, 0 mBm), (N/A) |
| [855645.395437] cfg80211: Calling CRDA for country: IE |
| [855645.406796] cfg80211: Regulatory domain changed to country: IE |
| [855645.406800] cfg80211: DFS Master region: unset |
| [855645.406802] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp), (dfs_cac_time) |
| [855645.406806] cfg80211: (2402000 KHz - 2482000 KHz @ 40000 KHz), (N/A, 2000 mBm), (N/A) |
| [855645.406808] cfg80211: (5170000 KHz - 5250000 KHz @ 80000 KHz), (N/A, 2000 mBm), (N/A) |
| [855645.406811] cfg80211: (5250000 KHz - 5330000 KHz @ 80000 KHz), (N/A, 2000 mBm), (0 s) |
| [855645.406813] cfg80211: (5490000 KHz - 5710000 KHz @ 80000 KHz), (N/A, 2700 mBm), (0 s) |
| [855645.406815] cfg80211: (57240000 KHz - 65880000 KHz @ 2160000 KHz), (N/A, 4000 mBm), (N/A) |
| [855656.554333] wlp1s0: authenticate with 9c:c1:72:10:42:7e |
| [855656.567275] wlp1s0: send auth to 9c:c1:72:10:42:7e (try 1/3) |
| [855656.569246] wlp1s0: authenticated |
| [855656.570559] wlp1s0: associate with 9c:c1:72:10:42:7e (try 1/3) |
| [855656.574533] wlp1s0: RX AssocResp from 9c:c1:72:10:42:7e (capab=0x411 status=0 aid=5) |
| [855656.574633] wlp1s0: associated |
| [857801.527326] cfg80211: Calling CRDA to update world regulatory domain |
| [857801.531740] cfg80211: World regulatory domain updated: |
| [857801.531748] cfg80211: DFS Master region: unset |
| [857801.531751] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp), (dfs_cac_time) |
| [857801.531756] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (N/A, 2000 mBm), (N/A) |
| [857801.531760] cfg80211: (2457000 KHz - 2482000 KHz @ 40000 KHz), (N/A, 2000 mBm), (N/A) |
| [857801.531763] cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (N/A, 2000 mBm), (N/A) |
| [857801.531766] cfg80211: (5170000 KHz - 5250000 KHz @ 80000 KHz), (N/A, 2000 mBm), (N/A) |
| [857801.531769] cfg80211: (5735000 KHz - 5835000 KHz @ 80000 KHz), (N/A, 2000 mBm), (N/A) |
| [857801.531773] cfg80211: (57240000 KHz - 63720000 KHz @ 2160000 KHz), (N/A, 0 mBm), (N/A) |
| [857801.531843] cfg80211: Calling CRDA for country: IE |
| [857801.548552] cfg80211: Regulatory domain changed to country: IE |
| [857801.548558] cfg80211: DFS Master region: unset |
| [857801.548561] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp), (dfs_cac_time) |
| [857801.548565] cfg80211: (2402000 KHz - 2482000 KHz @ 40000 KHz), (N/A, 2000 mBm), (N/A) |
| [857801.548568] cfg80211: (5170000 KHz - 5250000 KHz @ 80000 KHz), (N/A, 2000 mBm), (N/A) |
| [857801.548571] cfg80211: (5250000 KHz - 5330000 KHz @ 80000 KHz), (N/A, 2000 mBm), (0 s) |
| [857801.548574] cfg80211: (5490000 KHz - 5710000 KHz @ 80000 KHz), (N/A, 2700 mBm), (0 s) |
| [857801.548576] cfg80211: (57240000 KHz - 65880000 KHz @ 2160000 KHz), (N/A, 4000 mBm), (N/A) |
| [857804.652387] wlp1s0: authenticate with 9c:c1:72:10:42:7e |
| [857804.665160] wlp1s0: send auth to 9c:c1:72:10:42:7e (try 1/3) |
| [857804.669170] wlp1s0: authenticated |
| [857804.669510] wlp1s0: associate with 9c:c1:72:10:42:7e (try 1/3) |
| [857804.673290] wlp1s0: RX AssocResp from 9c:c1:72:10:42:7e (capab=0x411 status=0 aid=5) |
| [857804.673383] wlp1s0: associated |
| [857807.518654] cfg80211: Calling CRDA to update world regulatory domain |
| [857807.523161] cfg80211: World regulatory domain updated: |
| [857807.523168] cfg80211: DFS Master region: unset |
| [857807.523171] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp), (dfs_cac_time) |
| [857807.523176] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (N/A, 2000 mBm), (N/A) |
| [857807.523180] cfg80211: (2457000 KHz - 2482000 KHz @ 40000 KHz), (N/A, 2000 mBm), (N/A) |
| [857807.523184] cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (N/A, 2000 mBm), (N/A) |
| [857807.523187] cfg80211: (5170000 KHz - 5250000 KHz @ 80000 KHz), (N/A, 2000 mBm), (N/A) |
| [857807.523190] cfg80211: (5735000 KHz - 5835000 KHz @ 80000 KHz), (N/A, 2000 mBm), (N/A) |
| [857807.523193] cfg80211: (57240000 KHz - 63720000 KHz @ 2160000 KHz), (N/A, 0 mBm), (N/A) |
| [857807.523223] cfg80211: Calling CRDA for country: IE |
| [857807.539127] cfg80211: Regulatory domain changed to country: IE |
| [857807.539134] cfg80211: DFS Master region: unset |
| [857807.539137] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp), (dfs_cac_time) |
| [857807.539141] cfg80211: (2402000 KHz - 2482000 KHz @ 40000 KHz), (N/A, 2000 mBm), (N/A) |
| [857807.539145] cfg80211: (5170000 KHz - 5250000 KHz @ 80000 KHz), (N/A, 2000 mBm), (N/A) |
| [857807.539148] cfg80211: (5250000 KHz - 5330000 KHz @ 80000 KHz), (N/A, 2000 mBm), (0 s) |
| [857807.539151] cfg80211: (5490000 KHz - 5710000 KHz @ 80000 KHz), (N/A, 2700 mBm), (0 s) |
| [857807.539154] cfg80211: (57240000 KHz - 65880000 KHz @ 2160000 KHz), (N/A, 4000 mBm), (N/A) |
| [857810.651384] wlp1s0: authenticate with 9c:c1:72:10:42:7e |
| [857810.664158] wlp1s0: send auth to 9c:c1:72:10:42:7e (try 1/3) |
| [857810.670497] wlp1s0: authenticated |
| [857810.671504] wlp1s0: associate with 9c:c1:72:10:42:7e (try 1/3) |
| [857810.676476] wlp1s0: RX AssocResp from 9c:c1:72:10:42:7e (capab=0x411 status=0 aid=5) |
| [857810.676572] wlp1s0: associated |
| [857841.515139] cfg80211: Calling CRDA to update world regulatory domain |
| [857841.519729] cfg80211: World regulatory domain updated: |
| [857841.519735] cfg80211: DFS Master region: unset |
| [857841.519738] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp), (dfs_cac_time) |
| [857841.519743] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (N/A, 2000 mBm), (N/A) |
| [857841.519746] cfg80211: (2457000 KHz - 2482000 KHz @ 40000 KHz), (N/A, 2000 mBm), (N/A) |
| [857841.519749] cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (N/A, 2000 mBm), (N/A) |
| [857841.519752] cfg80211: (5170000 KHz - 5250000 KHz @ 80000 KHz), (N/A, 2000 mBm), (N/A) |
| [857841.519754] cfg80211: (5735000 KHz - 5835000 KHz @ 80000 KHz), (N/A, 2000 mBm), (N/A) |
| [857841.519757] cfg80211: (57240000 KHz - 63720000 KHz @ 2160000 KHz), (N/A, 0 mBm), (N/A) |
| [857841.519785] cfg80211: Calling CRDA for country: IE |
| [857841.529560] cfg80211: Regulatory domain changed to country: IE |
| [857841.529565] cfg80211: DFS Master region: unset |
| [857841.529567] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp), (dfs_cac_time) |
| [857841.529571] cfg80211: (2402000 KHz - 2482000 KHz @ 40000 KHz), (N/A, 2000 mBm), (N/A) |
| [857841.529574] cfg80211: (5170000 KHz - 5250000 KHz @ 80000 KHz), (N/A, 2000 mBm), (N/A) |
| [857841.529577] cfg80211: (5250000 KHz - 5330000 KHz @ 80000 KHz), (N/A, 2000 mBm), (0 s) |
| [857841.529579] cfg80211: (5490000 KHz - 5710000 KHz @ 80000 KHz), (N/A, 2700 mBm), (0 s) |
| [857841.529582] cfg80211: (57240000 KHz - 65880000 KHz @ 2160000 KHz), (N/A, 4000 mBm), (N/A) |
| [857844.648579] wlp1s0: authenticate with 9c:c1:72:10:42:7e |
| [857844.661525] wlp1s0: send auth to 9c:c1:72:10:42:7e (try 1/3) |
| [857844.665833] wlp1s0: authenticated |
| [857844.666793] wlp1s0: associate with 9c:c1:72:10:42:7e (try 1/3) |
| [857844.670608] wlp1s0: RX AssocResp from 9c:c1:72:10:42:7e (capab=0x411 status=0 aid=5) |
| [857844.670760] wlp1s0: associated |
| [857849.513673] cfg80211: Calling CRDA to update world regulatory domain |
| [857849.517694] cfg80211: World regulatory domain updated: |
| [857849.517701] cfg80211: DFS Master region: unset |
| [857849.517703] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp), (dfs_cac_time) |
| [857849.517708] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (N/A, 2000 mBm), (N/A) |
| [857849.517712] cfg80211: (2457000 KHz - 2482000 KHz @ 40000 KHz), (N/A, 2000 mBm), (N/A) |
| [857849.517715] cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (N/A, 2000 mBm), (N/A) |
| [857849.517718] cfg80211: (5170000 KHz - 5250000 KHz @ 80000 KHz), (N/A, 2000 mBm), (N/A) |
| [857849.517720] cfg80211: (5735000 KHz - 5835000 KHz @ 80000 KHz), (N/A, 2000 mBm), (N/A) |
| [857849.517724] cfg80211: (57240000 KHz - 63720000 KHz @ 2160000 KHz), (N/A, 0 mBm), (N/A) |
| [857849.517753] cfg80211: Calling CRDA for country: IE |
| [857849.521915] cfg80211: Regulatory domain changed to country: IE |
| [857849.521921] cfg80211: DFS Master region: unset |
| [857849.521924] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp), (dfs_cac_time) |
| [857849.521929] cfg80211: (2402000 KHz - 2482000 KHz @ 40000 KHz), (N/A, 2000 mBm), (N/A) |
| [857849.521932] cfg80211: (5170000 KHz - 5250000 KHz @ 80000 KHz), (N/A, 2000 mBm), (N/A) |
| [857849.521935] cfg80211: (5250000 KHz - 5330000 KHz @ 80000 KHz), (N/A, 2000 mBm), (0 s) |
| [857849.521938] cfg80211: (5490000 KHz - 5710000 KHz @ 80000 KHz), (N/A, 2700 mBm), (0 s) |
| [857849.521941] cfg80211: (57240000 KHz - 65880000 KHz @ 2160000 KHz), (N/A, 4000 mBm), (N/A) |
| [857852.646234] wlp1s0: authenticate with 9c:c1:72:10:42:7e |
| [857852.659165] wlp1s0: send auth to 9c:c1:72:10:42:7e (try 1/3) |
| [857852.661381] wlp1s0: authenticated |
| [857852.662436] wlp1s0: associate with 9c:c1:72:10:42:7e (try 1/3) |
| [857852.666219] wlp1s0: RX AssocResp from 9c:c1:72:10:42:7e (capab=0x411 status=0 aid=5) |
| [857852.666327] wlp1s0: associated |
| [857854.510786] cfg80211: Calling CRDA to update world regulatory domain |
| [857854.515273] cfg80211: World regulatory domain updated: |
| [857854.515280] cfg80211: DFS Master region: unset |
| [857854.515283] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp), (dfs_cac_time) |
| [857854.515289] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (N/A, 2000 mBm), (N/A) |
| [857854.515293] cfg80211: (2457000 KHz - 2482000 KHz @ 40000 KHz), (N/A, 2000 mBm), (N/A) |
| [857854.515296] cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (N/A, 2000 mBm), (N/A) |
| [857854.515299] cfg80211: (5170000 KHz - 5250000 KHz @ 80000 KHz), (N/A, 2000 mBm), (N/A) |
| [857854.515302] cfg80211: (5735000 KHz - 5835000 KHz @ 80000 KHz), (N/A, 2000 mBm), (N/A) |
| [857854.515305] cfg80211: (57240000 KHz - 63720000 KHz @ 2160000 KHz), (N/A, 0 mBm), (N/A) |
| [857854.515333] cfg80211: Calling CRDA for country: IE |
| [857854.527825] cfg80211: Regulatory domain changed to country: IE |
| [857854.527832] cfg80211: DFS Master region: unset |
| [857854.527835] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp), (dfs_cac_time) |
| [857854.527839] cfg80211: (2402000 KHz - 2482000 KHz @ 40000 KHz), (N/A, 2000 mBm), (N/A) |
| [857854.527843] cfg80211: (5170000 KHz - 5250000 KHz @ 80000 KHz), (N/A, 2000 mBm), (N/A) |
| [857854.527846] cfg80211: (5250000 KHz - 5330000 KHz @ 80000 KHz), (N/A, 2000 mBm), (0 s) |
| [857854.527848] cfg80211: (5490000 KHz - 5710000 KHz @ 80000 KHz), (N/A, 2700 mBm), (0 s) |
| [857854.527852] cfg80211: (57240000 KHz - 65880000 KHz @ 2160000 KHz), (N/A, 4000 mBm), (N/A) |
| [857857.643392] wlp1s0: authenticate with 9c:c1:72:10:42:7e |
| [857857.656322] wlp1s0: send auth to 9c:c1:72:10:42:7e (try 1/3) |
| [857857.658400] wlp1s0: authenticated |
| [857857.659647] wlp1s0: associate with 9c:c1:72:10:42:7e (try 1/3) |
| [857857.663466] wlp1s0: RX AssocResp from 9c:c1:72:10:42:7e (capab=0x411 status=0 aid=5) |
| [857857.663599] wlp1s0: associated |
| [857924.503149] cfg80211: Calling CRDA to update world regulatory domain |
| [857924.507636] cfg80211: World regulatory domain updated: |
| [857924.507643] cfg80211: DFS Master region: unset |
| [857924.507646] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp), (dfs_cac_time) |
| [857924.507651] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (N/A, 2000 mBm), (N/A) |
| [857924.507655] cfg80211: (2457000 KHz - 2482000 KHz @ 40000 KHz), (N/A, 2000 mBm), (N/A) |
| [857924.507658] cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (N/A, 2000 mBm), (N/A) |
| [857924.507661] cfg80211: (5170000 KHz - 5250000 KHz @ 80000 KHz), (N/A, 2000 mBm), (N/A) |
| [857924.507664] cfg80211: (5735000 KHz - 5835000 KHz @ 80000 KHz), (N/A, 2000 mBm), (N/A) |
| [857924.507668] cfg80211: (57240000 KHz - 63720000 KHz @ 2160000 KHz), (N/A, 0 mBm), (N/A) |
| [857924.507698] cfg80211: Calling CRDA for country: IE |
| [857924.524020] cfg80211: Regulatory domain changed to country: IE |
| [857924.524027] cfg80211: DFS Master region: unset |
| [857924.524030] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp), (dfs_cac_time) |
| [857924.524035] cfg80211: (2402000 KHz - 2482000 KHz @ 40000 KHz), (N/A, 2000 mBm), (N/A) |
| [857924.524038] cfg80211: (5170000 KHz - 5250000 KHz @ 80000 KHz), (N/A, 2000 mBm), (N/A) |
| [857924.524042] cfg80211: (5250000 KHz - 5330000 KHz @ 80000 KHz), (N/A, 2000 mBm), (0 s) |
| [857924.524044] cfg80211: (5490000 KHz - 5710000 KHz @ 80000 KHz), (N/A, 2700 mBm), (0 s) |
| [857924.524047] cfg80211: (57240000 KHz - 65880000 KHz @ 2160000 KHz), (N/A, 4000 mBm), (N/A) |
| [857927.636373] wlp1s0: authenticate with 9c:c1:72:10:42:7e |
| [857927.649485] wlp1s0: send auth to 9c:c1:72:10:42:7e (try 1/3) |
| [857927.651478] wlp1s0: authenticated |
| [857927.651798] wlp1s0: associate with 9c:c1:72:10:42:7e (try 1/3) |
| [857927.655573] wlp1s0: RX AssocResp from 9c:c1:72:10:42:7e (capab=0x411 status=0 aid=5) |
| [857927.655662] wlp1s0: associated |
| [860348.063945] kvm: zapping shadow pages for mmio generation wraparound |
| [860351.001456] kvm [21395]: vcpu0 disabled perfctr wrmsr: 0xc1 data 0xabcd |
| [865537.522218] sound hdaudioC1D0: hda-codec: out of range cmd 0:20:400:ffffff0f |
| [919522.417311] cfg80211: Calling CRDA to update world regulatory domain |
| [919522.430196] cfg80211: World regulatory domain updated: |
| [919522.430201] cfg80211: DFS Master region: unset |
| [919522.430203] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp), (dfs_cac_time) |
| [919522.430207] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (N/A, 2000 mBm), (N/A) |
| [919522.430210] cfg80211: (2457000 KHz - 2482000 KHz @ 40000 KHz), (N/A, 2000 mBm), (N/A) |
| [919522.430212] cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (N/A, 2000 mBm), (N/A) |
| [919522.430214] cfg80211: (5170000 KHz - 5250000 KHz @ 80000 KHz), (N/A, 2000 mBm), (N/A) |
| [919522.430216] cfg80211: (5735000 KHz - 5835000 KHz @ 80000 KHz), (N/A, 2000 mBm), (N/A) |
| [919522.430218] cfg80211: (57240000 KHz - 63720000 KHz @ 2160000 KHz), (N/A, 0 mBm), (N/A) |
| [919522.430240] cfg80211: Calling CRDA for country: IE |
| [919522.440880] cfg80211: Regulatory domain changed to country: IE |
| [919522.440885] cfg80211: DFS Master region: unset |
| [919522.440887] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp), (dfs_cac_time) |
| [919522.440890] cfg80211: (2402000 KHz - 2482000 KHz @ 40000 KHz), (N/A, 2000 mBm), (N/A) |
| [919522.440893] cfg80211: (5170000 KHz - 5250000 KHz @ 80000 KHz), (N/A, 2000 mBm), (N/A) |
| [919522.440895] cfg80211: (5250000 KHz - 5330000 KHz @ 80000 KHz), (N/A, 2000 mBm), (0 s) |
| [919522.440897] cfg80211: (5490000 KHz - 5710000 KHz @ 80000 KHz), (N/A, 2700 mBm), (0 s) |
| [919522.440899] cfg80211: (57240000 KHz - 65880000 KHz @ 2160000 KHz), (N/A, 4000 mBm), (N/A) |
| [919602.827402] wlp1s0: authenticate with 9c:c1:72:10:42:7e |
| [919602.840125] wlp1s0: send auth to 9c:c1:72:10:42:7e (try 1/3) |
| [919602.842694] wlp1s0: authenticated |
| [919602.843345] wlp1s0: associate with 9c:c1:72:10:42:7e (try 1/3) |
| [919602.847889] wlp1s0: RX AssocResp from 9c:c1:72:10:42:7e (capab=0x411 status=0 aid=3) |
| [919602.847996] wlp1s0: associated |
| [943230.666481] wlp1s0: deauthenticating from 9c:c1:72:10:42:7e by local choice (Reason: 3=DEAUTH_LEAVING) |
| [943230.675003] cfg80211: Calling CRDA to update world regulatory domain |
| [943230.705049] cfg80211: World regulatory domain updated: |
| [943230.705056] cfg80211: DFS Master region: unset |
| [943230.705058] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp), (dfs_cac_time) |
| [943230.705062] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (N/A, 2000 mBm), (N/A) |
| [943230.705066] cfg80211: (2457000 KHz - 2482000 KHz @ 40000 KHz), (N/A, 2000 mBm), (N/A) |
| [943230.705068] cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (N/A, 2000 mBm), (N/A) |
| [943230.705070] cfg80211: (5170000 KHz - 5250000 KHz @ 80000 KHz), (N/A, 2000 mBm), (N/A) |
| [943230.705073] cfg80211: (5735000 KHz - 5835000 KHz @ 80000 KHz), (N/A, 2000 mBm), (N/A) |
| [943230.705075] cfg80211: (57240000 KHz - 63720000 KHz @ 2160000 KHz), (N/A, 0 mBm), (N/A) |
| [943230.705127] cfg80211: Calling CRDA for country: IE |
| [943230.713491] cfg80211: Regulatory domain changed to country: IE |
| [943230.713498] cfg80211: DFS Master region: unset |
| [943230.713500] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp), (dfs_cac_time) |
| [943230.713504] cfg80211: (2402000 KHz - 2482000 KHz @ 40000 KHz), (N/A, 2000 mBm), (N/A) |
| [943230.713507] cfg80211: (5170000 KHz - 5250000 KHz @ 80000 KHz), (N/A, 2000 mBm), (N/A) |
| [943230.713510] cfg80211: (5250000 KHz - 5330000 KHz @ 80000 KHz), (N/A, 2000 mBm), (0 s) |
| [943230.713512] cfg80211: (5490000 KHz - 5710000 KHz @ 80000 KHz), (N/A, 2700 mBm), (0 s) |
| [943230.713515] cfg80211: (57240000 KHz - 65880000 KHz @ 2160000 KHz), (N/A, 4000 mBm), (N/A) |
| [943235.575028] PM: Syncing filesystems ... done. |
| [943235.595870] Freezing user space processes ... (elapsed 0.001 seconds) done. |
| [943235.597828] Freezing remaining freezable tasks ... (elapsed 0.001 seconds) done. |
| [943235.599179] Suspending console(s) (use no_console_suspend to debug) |
| [943235.701363] sd 0:0:0:0: [sda] Synchronizing SCSI cache |
| [943235.701425] sd 0:0:0:0: [sda] Stopping disk |
| [943236.323117] PM: suspend of devices complete after 723.902 msecs |
| [943236.342141] PM: late suspend of devices complete after 19.008 msecs |
| [943236.342981] xhci_hcd 0000:00:14.0: System wakeup enabled by ACPI |
| [943236.354227] PM: noirq suspend of devices complete after 12.084 msecs |
| [943236.354557] ACPI: Preparing to enter system sleep state S3 |
| [943236.354990] PM: Saving platform NVS memory |
| [943236.354992] Disabling non-boot CPUs ... |
| [943236.355049] intel_pstate CPU 1 exiting |
| [943236.355320] Broke affinity for irq 41 |
| [943236.355322] Broke affinity for irq 42 |
| [943236.356339] kvm: disabling virtualization on CPU1 |
| [943236.356352] smpboot: CPU 1 is now offline |
| [943236.358237] ACPI: Low-level resume complete |
| [943236.358298] PM: Restoring platform NVS memory |
| [943236.358690] Enabling non-boot CPUs ... |
| [943236.358735] x86: Booting SMP configuration: |
| [943236.358736] smpboot: Booting Node 0 Processor 1 APIC 0x2 |
| [943236.372160] CPU1 microcode updated early to revision 0x18, date = 2014-05-23 |
| [943236.373619] kvm: enabling virtualization on CPU1 |
| [943236.376104] CPU1 is up |
| [943236.379158] ACPI: Waking up from system sleep state S3 |
| [943236.389660] pci 0000:00:1d.0: Refused to change power state, currently in D3 |
| [943236.390845] xhci_hcd 0000:00:14.0: System wakeup disabled by ACPI |
| [943236.390989] PM: noirq resume of devices complete after 11.687 msecs |
| [943236.396782] PM: early resume of devices complete after 5.767 msecs |
| [943236.397183] snd_hda_intel 0000:00:03.0: irq 44 for MSI/MSI-X |
| [943236.397436] snd_hda_intel 0000:00:1b.0: irq 45 for MSI/MSI-X |
| [943236.397504] rtc_cmos 00:03: System wakeup disabled by ACPI |
| [943236.397876] ath: phy0: ASPM enabled: 0x43 |
| [943236.407664] sd 0:0:0:0: [sda] Starting disk |
| [943236.704884] usb 1-4: reset full-speed USB device number 74 using xhci_hcd |
| [943236.704940] xhci_hcd 0000:00:14.0: Setup ERROR: setup context command for slot 15. |
| [943236.704953] usb 1-4: hub failed to enable device, error -22 |
| [943236.712562] ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300) |
| [943236.713102] ata1.00: configured for UDMA/133 |
| [943236.857688] usb 1-4: reset full-speed USB device number 74 using xhci_hcd |
| [943236.857755] xhci_hcd 0000:00:14.0: Setup ERROR: setup context command for slot 15. |
| [943236.857759] usb 1-4: hub failed to enable device, error -22 |
| [943237.010658] usb 1-4: reset full-speed USB device number 74 using xhci_hcd |
| [943237.022065] usb 1-4: device firmware changed |
| [943237.174898] usb 1-3: reset high-speed USB device number 3 using xhci_hcd |
| [943237.174919] xhci_hcd 0000:00:14.0: Setup ERROR: setup context command for slot 2. |
| [943237.174922] usb 1-3: hub failed to enable device, error -22 |
| [943237.327601] usb 1-3: reset high-speed USB device number 3 using xhci_hcd |
| [943237.327662] xhci_hcd 0000:00:14.0: Setup ERROR: setup context command for slot 2. |
| [943237.327666] usb 1-3: hub failed to enable device, error -22 |
| [943237.480599] usb 1-3: reset high-speed USB device number 3 using xhci_hcd |
| [943237.540579] xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff880172e61f60 |
| [943237.543122] restoring control 00000000-0000-0000-0000-000000000101/10/5 |
| [943237.550833] PM: resume of devices complete after 1154.241 msecs |
| [943237.551195] Restarting tasks ... done. |
| [943237.567425] usb 1-4: USB disconnect, device number 74 |
| [943237.568171] xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff88014fc79000 |
| [943237.568178] xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff88014fc79090 |
| [943237.568181] xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff88014fc79048 |
| [943237.568185] xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff8801735054c8 |
| [943237.568188] xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff880173505480 |
| [943237.721482] usb 1-4: new full-speed USB device number 75 using xhci_hcd |
| [943237.887195] usb 1-4: string descriptor 0 malformed (err = -61), defaulting to 0x0409 |
| [943237.889232] usb 1-4: New USB device found, idVendor=0cf3, idProduct=311e |
| [943237.889239] usb 1-4: New USB device strings: Mfr=1, Product=2, SerialNumber=3 |
| [943237.931437] usb 1-4: USB disconnect, device number 75 |
| [943238.216426] usb 1-4: new full-speed USB device number 76 using xhci_hcd |
| [943238.381619] usb 1-4: string descriptor 0 malformed (err = -61), defaulting to 0x0409 |
| [943238.383525] usb 1-4: New USB device found, idVendor=0cf3, idProduct=311e |
| [943238.383528] usb 1-4: New USB device strings: Mfr=1, Product=2, SerialNumber=3 |
| [943243.782257] wlp1s0: authenticate with 9c:c1:72:10:42:7e |
| [943243.795213] wlp1s0: send auth to 9c:c1:72:10:42:7e (try 1/3) |
| [943243.799635] wlp1s0: authenticated |
| [943243.800380] wlp1s0: associate with 9c:c1:72:10:42:7e (try 1/3) |
| [943243.804294] wlp1s0: RX AssocResp from 9c:c1:72:10:42:7e (capab=0x411 status=0 aid=7) |
| [943243.804453] wlp1s0: associated |
| [944069.395503] cfg80211: Calling CRDA to update world regulatory domain |
| [944069.398886] cfg80211: World regulatory domain updated: |
| [944069.398891] cfg80211: DFS Master region: unset |
| [944069.398893] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp), (dfs_cac_time) |
| [944069.398896] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (N/A, 2000 mBm), (N/A) |
| [944069.398899] cfg80211: (2457000 KHz - 2482000 KHz @ 40000 KHz), (N/A, 2000 mBm), (N/A) |
| [944069.398901] cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (N/A, 2000 mBm), (N/A) |
| [944069.398903] cfg80211: (5170000 KHz - 5250000 KHz @ 80000 KHz), (N/A, 2000 mBm), (N/A) |
| [944069.398905] cfg80211: (5735000 KHz - 5835000 KHz @ 80000 KHz), (N/A, 2000 mBm), (N/A) |
| [944069.398907] cfg80211: (57240000 KHz - 63720000 KHz @ 2160000 KHz), (N/A, 0 mBm), (N/A) |
| [944069.398928] cfg80211: Calling CRDA for country: IE |
| [944069.407775] cfg80211: Regulatory domain changed to country: IE |
| [944069.407780] cfg80211: DFS Master region: unset |
| [944069.407782] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp), (dfs_cac_time) |
| [944069.407785] cfg80211: (2402000 KHz - 2482000 KHz @ 40000 KHz), (N/A, 2000 mBm), (N/A) |
| [944069.407788] cfg80211: (5170000 KHz - 5250000 KHz @ 80000 KHz), (N/A, 2000 mBm), (N/A) |
| [944069.407790] cfg80211: (5250000 KHz - 5330000 KHz @ 80000 KHz), (N/A, 2000 mBm), (0 s) |
| [944069.407792] cfg80211: (5490000 KHz - 5710000 KHz @ 80000 KHz), (N/A, 2700 mBm), (0 s) |
| [944069.407794] cfg80211: (57240000 KHz - 65880000 KHz @ 2160000 KHz), (N/A, 4000 mBm), (N/A) |
| [944149.504316] wlp1s0: authenticate with 9c:c1:72:10:42:7e |
| [944149.517211] wlp1s0: send auth to 9c:c1:72:10:42:7e (try 1/3) |
| [944149.519191] wlp1s0: authenticated |
| [944149.520390] wlp1s0: associate with 9c:c1:72:10:42:7e (try 1/3) |
| [944149.524277] wlp1s0: RX AssocResp from 9c:c1:72:10:42:7e (capab=0x411 status=0 aid=6) |
| [944149.524427] wlp1s0: associated |
| [1045997.404700] gnome-shell[5983]: segfault at 7fffd3888fb0 ip 00007fb22bb10f05 sp 00007fffd3888fb0 error 6 in libc-2.17.so[7fb22ba93000+1b6000] |
| [1046076.752192] virbr0: port 2(vnet0) entered disabled state |
| [1046076.753221] device vnet0 left promiscuous mode |
| [1046076.753249] virbr0: port 2(vnet0) entered disabled state |
| [1046752.809069] wlp1s0: deauthenticating from 9c:c1:72:10:42:7e by local choice (Reason: 3=DEAUTH_LEAVING) |
| [1046752.815978] cfg80211: Calling CRDA to update world regulatory domain |
| [1046752.829869] cfg80211: World regulatory domain updated: |
| [1046752.829875] cfg80211: DFS Master region: unset |
| [1046752.829877] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp), (dfs_cac_time) |
| [1046752.829880] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (N/A, 2000 mBm), (N/A) |
| [1046752.829883] cfg80211: (2457000 KHz - 2482000 KHz @ 40000 KHz), (N/A, 2000 mBm), (N/A) |
| [1046752.829885] cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (N/A, 2000 mBm), (N/A) |
| [1046752.829887] cfg80211: (5170000 KHz - 5250000 KHz @ 80000 KHz), (N/A, 2000 mBm), (N/A) |
| [1046752.829889] cfg80211: (5735000 KHz - 5835000 KHz @ 80000 KHz), (N/A, 2000 mBm), (N/A) |
| [1046752.829891] cfg80211: (57240000 KHz - 63720000 KHz @ 2160000 KHz), (N/A, 0 mBm), (N/A) |
| [1046752.829911] cfg80211: Calling CRDA for country: IE |
| [1046752.850114] cfg80211: Regulatory domain changed to country: IE |
| [1046752.850119] cfg80211: DFS Master region: unset |
| [1046752.850121] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp), (dfs_cac_time) |
| [1046752.850125] cfg80211: (2402000 KHz - 2482000 KHz @ 40000 KHz), (N/A, 2000 mBm), (N/A) |
| [1046752.850127] cfg80211: (5170000 KHz - 5250000 KHz @ 80000 KHz), (N/A, 2000 mBm), (N/A) |
| [1046752.850130] cfg80211: (5250000 KHz - 5330000 KHz @ 80000 KHz), (N/A, 2000 mBm), (0 s) |
| [1046752.850132] cfg80211: (5490000 KHz - 5710000 KHz @ 80000 KHz), (N/A, 2700 mBm), (0 s) |
| [1046752.850134] cfg80211: (57240000 KHz - 65880000 KHz @ 2160000 KHz), (N/A, 4000 mBm), (N/A) |
| [1046754.436876] PM: Syncing filesystems ... done. |
| [1046754.455390] Freezing user space processes ... (elapsed 0.001 seconds) done. |
| [1046754.457110] Freezing remaining freezable tasks ... (elapsed 0.000 seconds) done. |
| [1046754.458122] Suspending console(s) (use no_console_suspend to debug) |
| [1046754.560300] sd 0:0:0:0: [sda] Synchronizing SCSI cache |
| [1046754.560340] sd 0:0:0:0: [sda] Stopping disk |
| [1046755.167988] PM: suspend of devices complete after 709.840 msecs |
| [1046755.185059] PM: late suspend of devices complete after 17.066 msecs |
| [1046755.185809] xhci_hcd 0000:00:14.0: System wakeup enabled by ACPI |
| [1046755.197108] PM: noirq suspend of devices complete after 12.046 msecs |
| [1046755.197412] ACPI: Preparing to enter system sleep state S3 |
| [1046755.197791] PM: Saving platform NVS memory |
| [1046755.197792] Disabling non-boot CPUs ... |
| [1046755.197862] intel_pstate CPU 1 exiting |
| [1046755.198120] Broke affinity for irq 21 |
| [1046755.198132] Broke affinity for irq 41 |
| [1046755.198133] Broke affinity for irq 42 |
| [1046755.199151] kvm: disabling virtualization on CPU1 |
| [1046755.199161] smpboot: CPU 1 is now offline |
| [1046755.201048] ACPI: Low-level resume complete |
| [1046755.201109] PM: Restoring platform NVS memory |
| [1046755.201499] Enabling non-boot CPUs ... |
| [1046755.201553] x86: Booting SMP configuration: |
| [1046755.201554] smpboot: Booting Node 0 Processor 1 APIC 0x2 |
| [1046755.214956] CPU1 microcode updated early to revision 0x18, date = 2014-05-23 |
| [1046755.216415] kvm: enabling virtualization on CPU1 |
| [1046755.218875] CPU1 is up |
| [1046755.220680] ACPI: Waking up from system sleep state S3 |
| [1046755.231643] pci 0000:00:1d.0: Refused to change power state, currently in D3 |
| [1046755.232600] xhci_hcd 0000:00:14.0: System wakeup disabled by ACPI |
| [1046755.232743] PM: noirq resume of devices complete after 11.861 msecs |
| [1046755.238736] PM: early resume of devices complete after 5.968 msecs |
| [1046755.239019] snd_hda_intel 0000:00:03.0: irq 44 for MSI/MSI-X |
| [1046755.239267] snd_hda_intel 0000:00:1b.0: irq 45 for MSI/MSI-X |
| [1046755.239443] rtc_cmos 00:03: System wakeup disabled by ACPI |
| [1046755.239817] ath: phy0: ASPM enabled: 0x43 |
| [1046755.249609] sd 0:0:0:0: [sda] Starting disk |
| [1046755.546828] usb 1-3: reset high-speed USB device number 3 using xhci_hcd |
| [1046755.546938] xhci_hcd 0000:00:14.0: Setup ERROR: setup context command for slot 2. |
| [1046755.546941] usb 1-3: hub failed to enable device, error -22 |
| [1046755.554566] ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300) |
| [1046755.555347] ata1.00: configured for UDMA/133 |
| [1046755.699633] usb 1-3: reset high-speed USB device number 3 using xhci_hcd |
| [1046755.699777] xhci_hcd 0000:00:14.0: Setup ERROR: setup context command for slot 2. |
| [1046755.699781] usb 1-3: hub failed to enable device, error -22 |
| [1046755.852617] usb 1-3: reset high-speed USB device number 3 using xhci_hcd |
| [1046755.913189] xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff880172e61f60 |
| [1046755.915932] restoring control 00000000-0000-0000-0000-000000000101/10/5 |
| [1046756.017833] usb 1-4: reset full-speed USB device number 76 using xhci_hcd |
| [1046756.017858] xhci_hcd 0000:00:14.0: Setup ERROR: setup context command for slot 17. |
| [1046756.017861] usb 1-4: hub failed to enable device, error -22 |
| [1046756.170564] usb 1-4: reset full-speed USB device number 76 using xhci_hcd |
| [1046756.170719] xhci_hcd 0000:00:14.0: Setup ERROR: setup context command for slot 17. |
| [1046756.170724] usb 1-4: hub failed to enable device, error -22 |
| [1046756.323655] usb 1-4: reset full-speed USB device number 76 using xhci_hcd |
| [1046756.334685] usb 1-4: device firmware changed |
| [1046756.334842] PM: resume of devices complete after 1096.292 msecs |
| [1046756.335159] Restarting tasks ... done. |
| [1046756.350378] usb 1-4: USB disconnect, device number 76 |
| [1046756.351777] xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff88015bb1b900 |
| [1046756.351782] xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff88015bb1b990 |
| [1046756.351785] xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff88015bb1b948 |
| [1046756.351788] xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff88004b0c4c48 |
| [1046756.351790] xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff88004b0c4c00 |
| [1046756.505401] usb 1-4: new full-speed USB device number 77 using xhci_hcd |
| [1046756.670919] usb 1-4: string descriptor 0 malformed (err = -61), defaulting to 0x0409 |
| [1046756.672948] usb 1-4: New USB device found, idVendor=0cf3, idProduct=311e |
| [1046756.672953] usb 1-4: New USB device strings: Mfr=1, Product=2, SerialNumber=3 |
| [1046756.713861] usb 1-4: USB disconnect, device number 77 |
| [1046756.998397] usb 1-4: new full-speed USB device number 78 using xhci_hcd |
| [1046757.163795] usb 1-4: string descriptor 0 malformed (err = -61), defaulting to 0x0409 |
| [1046757.165671] usb 1-4: New USB device found, idVendor=0cf3, idProduct=311e |
| [1046757.165677] usb 1-4: New USB device strings: Mfr=1, Product=2, SerialNumber=3 |
| [1046762.614895] wlp1s0: authenticate with 9c:c1:72:10:42:7e |
| [1046762.627918] wlp1s0: send auth to 9c:c1:72:10:42:7e (try 1/3) |
| [1046762.629883] wlp1s0: authenticated |
| [1046762.630263] wlp1s0: associate with 9c:c1:72:10:42:7e (try 1/3) |
| [1046762.634025] wlp1s0: RX AssocResp from 9c:c1:72:10:42:7e (capab=0x411 status=0 aid=4) |
| [1046762.634110] wlp1s0: associated |
| [1060549.439951] Bits 55-60 of /proc/PID/pagemap entries are about to stop being page-shift some time soon. See the linux/Documentation/vm/pagemap.txt for details. |
| [1069706.489871] cfg80211: Calling CRDA to update world regulatory domain |
| [1069706.497100] cfg80211: World regulatory domain updated: |
| [1069706.497105] cfg80211: DFS Master region: unset |
| [1069706.497107] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp), (dfs_cac_time) |
| [1069706.497110] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (N/A, 2000 mBm), (N/A) |
| [1069706.497113] cfg80211: (2457000 KHz - 2482000 KHz @ 40000 KHz), (N/A, 2000 mBm), (N/A) |
| [1069706.497115] cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (N/A, 2000 mBm), (N/A) |
| [1069706.497117] cfg80211: (5170000 KHz - 5250000 KHz @ 80000 KHz), (N/A, 2000 mBm), (N/A) |
| [1069706.497119] cfg80211: (5735000 KHz - 5835000 KHz @ 80000 KHz), (N/A, 2000 mBm), (N/A) |
| [1069706.497121] cfg80211: (57240000 KHz - 63720000 KHz @ 2160000 KHz), (N/A, 0 mBm), (N/A) |
| [1069706.497171] cfg80211: Calling CRDA for country: IE |
| [1069706.506342] cfg80211: Regulatory domain changed to country: IE |
| [1069706.506348] cfg80211: DFS Master region: unset |
| [1069706.506350] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp), (dfs_cac_time) |
| [1069706.506353] cfg80211: (2402000 KHz - 2482000 KHz @ 40000 KHz), (N/A, 2000 mBm), (N/A) |
| [1069706.506355] cfg80211: (5170000 KHz - 5250000 KHz @ 80000 KHz), (N/A, 2000 mBm), (N/A) |
| [1069706.506358] cfg80211: (5250000 KHz - 5330000 KHz @ 80000 KHz), (N/A, 2000 mBm), (0 s) |
| [1069706.506360] cfg80211: (5490000 KHz - 5710000 KHz @ 80000 KHz), (N/A, 2700 mBm), (0 s) |
| [1069706.506362] cfg80211: (57240000 KHz - 65880000 KHz @ 2160000 KHz), (N/A, 4000 mBm), (N/A) |
| [1069945.835510] wlp1s0: authenticate with 9c:c1:72:10:42:7e |
| [1069945.848355] wlp1s0: send auth to 9c:c1:72:10:42:7e (try 1/3) |
| [1069945.850296] wlp1s0: authenticated |
| [1069945.850893] wlp1s0: associate with 9c:c1:72:10:42:7e (try 1/3) |
| [1069945.854724] wlp1s0: RX AssocResp from 9c:c1:72:10:42:7e (capab=0x411 status=0 aid=1) |
| [1069945.854807] wlp1s0: associated |
| [1078099.136393] traps: polkitd[6778] general protection ip:7f49a0c9ecf2 sp:7fffb5bdad70 error:0 in libmozjs-17.0.so[7f49a0b60000+3b3000] |
| [1101757.991851] device vnet0 entered promiscuous mode |
| [1101758.006746] virbr0: port 2(vnet0) entered listening state |
| [1101758.006761] virbr0: port 2(vnet0) entered listening state |
| [1101759.698608] qemu-kvm[19028]: segfault at 7f467670fc00 ip 00007f467006a850 sp 00007fffa5501ad8 error 4 in libpixman-1.so.0.32.4[7f4670012000+a5000] |
| [1101760.007084] virbr0: port 2(vnet0) entered learning state |
| [1101762.010733] virbr0: topology change detected, propagating |
| [1101762.010745] virbr0: port 2(vnet0) entered forwarding state |
| [1101762.112503] virbr0: port 2(vnet0) entered disabled state |
| [1101762.114079] device vnet0 left promiscuous mode |
| [1101762.114108] virbr0: port 2(vnet0) entered disabled state |
| [1101813.881002] device vnet0 entered promiscuous mode |
| [1101813.889953] virbr0: port 2(vnet0) entered listening state |
| [1101813.889964] virbr0: port 2(vnet0) entered listening state |
| [1101815.893330] virbr0: port 2(vnet0) entered learning state |
| [1101816.625997] qemu-kvm[20368]: segfault at 7fdad149f520 ip 00007fdac9edc850 sp 00007fffd2a14688 error 4 in libpixman-1.so.0.32.4[7fdac9e84000+a5000] |
| [1101817.896975] virbr0: topology change detected, propagating |
| [1101817.896986] virbr0: port 2(vnet0) entered forwarding state |
| [1101820.533792] virbr0: port 2(vnet0) entered disabled state |
| [1101820.534990] device vnet0 left promiscuous mode |
| [1101820.535024] virbr0: port 2(vnet0) entered disabled state |
| [1101825.601773] device vnet0 entered promiscuous mode |
| [1101825.606741] virbr0: port 2(vnet0) entered listening state |
| [1101825.606752] virbr0: port 2(vnet0) entered listening state |
| [1101827.611285] virbr0: port 2(vnet0) entered learning state |
| [1101829.614936] virbr0: topology change detected, propagating |
| [1101829.614947] virbr0: port 2(vnet0) entered forwarding state |
| [1101834.619203] kvm [20514]: vcpu0 disabled perfctr wrmsr: 0xc1 data 0xabcd |
| [1102069.046898] virbr0: port 2(vnet0) entered disabled state |
| [1102069.047833] device vnet0 left promiscuous mode |
| [1102069.047860] virbr0: port 2(vnet0) entered disabled state |
| [1104400.560723] wlp1s0: deauthenticating from 9c:c1:72:10:42:7e by local choice (Reason: 3=DEAUTH_LEAVING) |
| [1104400.568186] cfg80211: Calling CRDA to update world regulatory domain |
| [1104400.588269] cfg80211: World regulatory domain updated: |
| [1104400.588274] cfg80211: DFS Master region: unset |
| [1104400.588276] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp), (dfs_cac_time) |
| [1104400.588279] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (N/A, 2000 mBm), (N/A) |
| [1104400.588282] cfg80211: (2457000 KHz - 2482000 KHz @ 40000 KHz), (N/A, 2000 mBm), (N/A) |
| [1104400.588284] cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (N/A, 2000 mBm), (N/A) |
| [1104400.588286] cfg80211: (5170000 KHz - 5250000 KHz @ 80000 KHz), (N/A, 2000 mBm), (N/A) |
| [1104400.588288] cfg80211: (5735000 KHz - 5835000 KHz @ 80000 KHz), (N/A, 2000 mBm), (N/A) |
| [1104400.588290] cfg80211: (57240000 KHz - 63720000 KHz @ 2160000 KHz), (N/A, 0 mBm), (N/A) |
| [1104400.588308] cfg80211: Calling CRDA for country: IE |
| [1104400.605744] cfg80211: Regulatory domain changed to country: IE |
| [1104400.605750] cfg80211: DFS Master region: unset |
| [1104400.605752] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp), (dfs_cac_time) |
| [1104400.605756] cfg80211: (2402000 KHz - 2482000 KHz @ 40000 KHz), (N/A, 2000 mBm), (N/A) |
| [1104400.605777] cfg80211: (5170000 KHz - 5250000 KHz @ 80000 KHz), (N/A, 2000 mBm), (N/A) |
| [1104400.605779] cfg80211: (5250000 KHz - 5330000 KHz @ 80000 KHz), (N/A, 2000 mBm), (0 s) |
| [1104400.605781] cfg80211: (5490000 KHz - 5710000 KHz @ 80000 KHz), (N/A, 2700 mBm), (0 s) |
| [1104400.605783] cfg80211: (57240000 KHz - 65880000 KHz @ 2160000 KHz), (N/A, 4000 mBm), (N/A) |
| [1104402.164480] PM: Syncing filesystems ... done. |
| [1104402.310429] Freezing user space processes ... (elapsed 0.002 seconds) done. |
| [1104402.312519] Freezing remaining freezable tasks ... (elapsed 0.001 seconds) done. |
| [1104402.313553] Suspending console(s) (use no_console_suspend to debug) |
| [1104402.415904] sd 0:0:0:0: [sda] Synchronizing SCSI cache |
| [1104402.415944] sd 0:0:0:0: [sda] Stopping disk |
| [1104403.075358] PM: suspend of devices complete after 761.660 msecs |
| [1104403.092435] PM: late suspend of devices complete after 17.071 msecs |
| [1104403.093375] xhci_hcd 0000:00:14.0: System wakeup enabled by ACPI |
| [1104403.104630] PM: noirq suspend of devices complete after 12.191 msecs |
| [1104403.105025] ACPI: Preparing to enter system sleep state S3 |
| [1104403.105511] PM: Saving platform NVS memory |
| [1104403.105512] Disabling non-boot CPUs ... |
| [1104403.105594] intel_pstate CPU 1 exiting |
| [1104403.105903] Broke affinity for irq 41 |
| [1104403.105905] Broke affinity for irq 42 |
| [1104403.106927] kvm: disabling virtualization on CPU1 |
| [1104403.106941] smpboot: CPU 1 is now offline |
| [1104403.109063] ACPI: Low-level resume complete |
| [1104403.109124] PM: Restoring platform NVS memory |
| [1104403.109510] Enabling non-boot CPUs ... |
| [1104403.109556] x86: Booting SMP configuration: |
| [1104403.109558] smpboot: Booting Node 0 Processor 1 APIC 0x2 |
| [1104403.122978] CPU1 microcode updated early to revision 0x18, date = 2014-05-23 |
| [1104403.124437] kvm: enabling virtualization on CPU1 |
| [1104403.126862] CPU1 is up |
| [1104403.128668] ACPI: Waking up from system sleep state S3 |
| [1104403.141001] pci 0000:00:1d.0: Refused to change power state, currently in D3 |
| [1104403.141140] xhci_hcd 0000:00:14.0: System wakeup disabled by ACPI |
| [1104403.141275] PM: noirq resume of devices complete after 12.404 msecs |
| [1104403.147161] PM: early resume of devices complete after 5.860 msecs |
| [1104403.147444] snd_hda_intel 0000:00:03.0: irq 44 for MSI/MSI-X |
| [1104403.147723] snd_hda_intel 0000:00:1b.0: irq 45 for MSI/MSI-X |
| [1104403.147864] rtc_cmos 00:03: System wakeup disabled by ACPI |
| [1104403.148250] ath: phy0: ASPM enabled: 0x43 |
| [1104403.159052] sd 0:0:0:0: [sda] Starting disk |
| [1104403.455163] usb 1-3: reset high-speed USB device number 3 using xhci_hcd |
| [1104403.455217] xhci_hcd 0000:00:14.0: Setup ERROR: setup context command for slot 2. |
| [1104403.455229] usb 1-3: hub failed to enable device, error -22 |
| [1104403.463954] ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300) |
| [1104403.464470] ata1.00: configured for UDMA/133 |
| [1104403.608068] usb 1-3: reset high-speed USB device number 3 using xhci_hcd |
| [1104403.608135] xhci_hcd 0000:00:14.0: Setup ERROR: setup context command for slot 2. |
| [1104403.608139] usb 1-3: hub failed to enable device, error -22 |
| [1104403.761000] usb 1-3: reset high-speed USB device number 3 using xhci_hcd |
| [1104403.821169] xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff880172e61f60 |
| [1104403.823870] restoring control 00000000-0000-0000-0000-000000000101/10/5 |
| [1104403.926245] usb 1-4: reset full-speed USB device number 78 using xhci_hcd |
| [1104403.926401] xhci_hcd 0000:00:14.0: Setup ERROR: setup context command for slot 20. |
| [1104403.926406] usb 1-4: hub failed to enable device, error -22 |
| [1104404.079051] usb 1-4: reset full-speed USB device number 78 using xhci_hcd |
| [1104404.079072] xhci_hcd 0000:00:14.0: Setup ERROR: setup context command for slot 20. |
| [1104404.079075] usb 1-4: hub failed to enable device, error -22 |
| [1104404.231993] usb 1-4: reset full-speed USB device number 78 using xhci_hcd |
| [1104404.243439] usb 1-4: device firmware changed |
| [1104404.243697] PM: resume of devices complete after 1096.719 msecs |
| [1104404.244058] Restarting tasks ... done. |
| [1104404.263801] usb 1-4: USB disconnect, device number 78 |
| [1104404.264630] xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff88017301a700 |
| [1104404.264635] xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff88017301a790 |
| [1104404.264638] xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff88017301a748 |
| [1104404.264640] xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff88005e934288 |
| [1104404.264643] xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff88005e934240 |
| [1104404.417766] usb 1-4: new full-speed USB device number 79 using xhci_hcd |
| [1104404.583114] usb 1-4: string descriptor 0 malformed (err = -61), defaulting to 0x0409 |
| [1104404.584998] usb 1-4: New USB device found, idVendor=0cf3, idProduct=311e |
| [1104404.585002] usb 1-4: New USB device strings: Mfr=1, Product=2, SerialNumber=3 |
| [1104404.622213] usb 1-4: USB disconnect, device number 79 |
| [1104404.905816] usb 1-4: new full-speed USB device number 80 using xhci_hcd |
| [1104405.071298] usb 1-4: string descriptor 0 malformed (err = -61), defaulting to 0x0409 |
| [1104405.073173] usb 1-4: New USB device found, idVendor=0cf3, idProduct=311e |
| [1104405.073177] usb 1-4: New USB device strings: Mfr=1, Product=2, SerialNumber=3 |
| [1104410.634341] wlp1s0: authenticate with 9c:c1:72:10:42:7e |
| [1104410.644232] wlp1s0: send auth to 9c:c1:72:10:42:7e (try 1/3) |
| [1104410.646216] wlp1s0: authenticated |
| [1104410.646869] wlp1s0: associate with 9c:c1:72:10:42:7e (try 1/3) |
| [1104410.650588] wlp1s0: RX AssocResp from 9c:c1:72:10:42:7e (capab=0x411 status=0 aid=4) |
| [1104410.650739] wlp1s0: associated |
| [1104480.705210] usb 1-2: new high-speed USB device number 81 using xhci_hcd |
| [1104480.869605] usb 1-2: New USB device found, idVendor=1d6b, idProduct=0104 |
| [1104480.869611] usb 1-2: New USB device strings: Mfr=2, Product=3, SerialNumber=4 |
| [1104480.869614] usb 1-2: Product: BeagleBoneBlack |
| [1104480.869617] usb 1-2: Manufacturer: Circuitco |
| [1104480.869619] usb 1-2: SerialNumber: 5C-3913BBBK0046 |
| [1104480.873079] usb-storage 1-2:1.4: USB Mass Storage device detected |
| [1104480.879187] scsi host6: usb-storage 1-2:1.4 |
| [1104480.910349] usbcore: registered new interface driver cdc_ether |
| [1104480.925821] cdc_acm 1-2:1.2: This device cannot do calls on its own. It is not a modem. |
| [1104480.925891] cdc_acm 1-2:1.2: ttyACM0: USB ACM device |
| [1104480.927314] usbcore: registered new interface driver cdc_acm |
| [1104480.927320] cdc_acm: USB Abstract Control Model driver for USB modems and ISDN adapters |
| [1104480.939052] rndis_host 1-2:1.0 eth0: register 'rndis_host' at usb-0000:00:14.0-2, RNDIS device, c8:a0:30:af:53:b9 |
| [1104480.939586] usbcore: registered new interface driver rndis_host |
| [1104480.954489] rndis_host 1-2:1.0 enp0s20u2: renamed from eth0 |
| [1104480.959303] systemd-udevd[552]: renamed network interface eth0 to enp0s20u2 |
| [1104481.896646] scsi 6:0:0:0: Direct-Access Linux File-CD Gadget 0308 PQ: 0 ANSI: 2 |
| [1104481.896994] sd 6:0:0:0: Attached scsi generic sg2 type 0 |
| [1104481.904452] sd 6:0:0:0: [sdc] 196608 512-byte logical blocks: (100 MB/96.0 MiB) |
| [1104481.904620] sd 6:0:0:0: [sdc] Write Protect is off |
| [1104481.904624] sd 6:0:0:0: [sdc] Mode Sense: 0f 00 00 00 |
| [1104481.904798] sd 6:0:0:0: [sdc] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA |
| [1104481.910686] sdc: |
| [1104481.912276] sd 6:0:0:0: [sdc] Attached SCSI removable disk |
| [1104874.457283] usb 1-2: USB disconnect, device number 81 |
| [1104874.457391] rndis_host 1-2:1.0 enp0s20u2: unregister 'rndis_host' usb-0000:00:14.0-2, RNDIS device |
| [1104874.474998] sd 6:0:0:0: [sdc] Synchronizing SCSI cache |
| [1104874.475052] sd 6:0:0:0: [sdc] |
| [1104874.475055] Result: hostbyte=DID_NO_CONNECT driverbyte=DRIVER_OK |
| [1104874.594241] FAT-fs (sdc): unable to read boot sector to mark fs as dirty |
| [1104939.410269] usb 1-7: new high-speed USB device number 82 using xhci_hcd |
| [1104939.584407] usb 1-7: New USB device found, idVendor=0bda, idProduct=0177 |
| [1104939.584413] usb 1-7: New USB device strings: Mfr=1, Product=2, SerialNumber=3 |
| [1104939.584416] usb 1-7: Product: USB2.0-CRW |
| [1104939.584419] usb 1-7: Manufacturer: Generic |
| [1104939.584421] usb 1-7: SerialNumber: 20121112761000000 |
| [1104939.588714] usb-storage 1-7:1.0: USB Mass Storage device detected |
| [1104939.588905] scsi host7: usb-storage 1-7:1.0 |
| [1104940.591967] scsi 7:0:0:0: Direct-Access Generic- SD/MMC/MS PRO 1.00 PQ: 0 ANSI: 4 |
| [1104940.595078] sd 7:0:0:0: Attached scsi generic sg2 type 0 |
| [1104941.414195] sd 7:0:0:0: [sdc] 15523840 512-byte logical blocks: (7.94 GB/7.40 GiB) |
| [1104941.414618] sd 7:0:0:0: [sdc] Write Protect is off |
| [1104941.414633] sd 7:0:0:0: [sdc] Mode Sense: 2f 00 00 00 |
| [1104941.414986] sd 7:0:0:0: [sdc] Write cache: disabled, read cache: enabled, doesn't support DPO or FUA |
| [1104941.418309] sdc: sdc1 sdc2 |
| [1104941.419809] sd 7:0:0:0: [sdc] Attached SCSI removable disk |
| [1104941.806739] FAT-fs (sdc1): Volume was not properly unmounted. Some data may be corrupt. Please run fsck. |
| [1104942.334618] EXT4-fs (sdc2): recovery complete |
| [1104942.337011] EXT4-fs (sdc2): mounted filesystem with ordered data mode. Opts: (null) |
| [1106730.837481] JBD2: Error -5 detected when updating journal superblock for sdc2-8. |
| [1106730.837490] JBD2: Error -5 detected when updating journal superblock for sdc2-8. |
| [1106730.859403] sdc: detected capacity change from 7948206080 to 0 |
| [1106732.856793] usb 1-7: USB disconnect, device number 82 |
| [1106805.709283] usb 1-2: new high-speed USB device number 83 using xhci_hcd |
| [1106805.873855] usb 1-2: New USB device found, idVendor=1d6b, idProduct=0104 |
| [1106805.873864] usb 1-2: New USB device strings: Mfr=2, Product=3, SerialNumber=4 |
| [1106805.873869] usb 1-2: Product: BeagleBoneBlack |
| [1106805.873873] usb 1-2: Manufacturer: Circuitco |
| [1106805.873877] usb 1-2: SerialNumber: 5C-3913BBBK0046 |
| [1106805.876803] rndis_host 1-2:1.0 eth0: register 'rndis_host' at usb-0000:00:14.0-2, RNDIS device, c8:a0:30:af:53:b9 |
| [1106805.877892] cdc_acm 1-2:1.2: This device cannot do calls on its own. It is not a modem. |
| [1106805.877961] cdc_acm 1-2:1.2: ttyACM0: USB ACM device |
| [1106805.879449] usb-storage 1-2:1.4: USB Mass Storage device detected |
| [1106805.879747] scsi host8: usb-storage 1-2:1.4 |
| [1106805.908846] rndis_host 1-2:1.0 enp0s20u2: renamed from eth0 |
| [1106805.919441] systemd-udevd[6629]: renamed network interface eth0 to enp0s20u2 |
| [1106806.882662] scsi 8:0:0:0: Direct-Access Linux File-CD Gadget 0308 PQ: 0 ANSI: 2 |
| [1106806.883831] sd 8:0:0:0: Attached scsi generic sg2 type 0 |
| [1106806.889998] sd 8:0:0:0: [sdc] 196608 512-byte logical blocks: (100 MB/96.0 MiB) |
| [1106806.890231] sd 8:0:0:0: [sdc] Write Protect is off |
| [1106806.890237] sd 8:0:0:0: [sdc] Mode Sense: 0f 00 00 00 |
| [1106806.890431] sd 8:0:0:0: [sdc] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA |
| [1106806.895359] sdc: |
| [1106806.899769] sd 8:0:0:0: [sdc] Attached SCSI removable disk |
| [1107081.212108] usb 1-2: USB disconnect, device number 83 |
| [1107081.212203] rndis_host 1-2:1.0 enp0s20u2: unregister 'rndis_host' usb-0000:00:14.0-2, RNDIS device |
| [1107081.227139] sd 8:0:0:0: [sdc] Synchronizing SCSI cache |
| [1107081.227199] sd 8:0:0:0: [sdc] |
| [1107081.227203] Result: hostbyte=DID_NO_CONNECT driverbyte=DRIVER_OK |
| [1107081.269493] FAT-fs (sdc): unable to read boot sector to mark fs as dirty |
| [1107088.012491] usb 1-2: new full-speed USB device number 84 using xhci_hcd |
| [1107088.176712] usb 1-2: not running at top speed; connect to a high speed hub |
| [1107088.177582] usb 1-2: New USB device found, idVendor=0451, idProduct=6141 |
| [1107088.177588] usb 1-2: New USB device strings: Mfr=33, Product=37, SerialNumber=0 |
| [1107088.177591] usb 1-2: Product: AM335x USB |
| [1107088.177594] usb 1-2: Manufacturer: Texas Instruments |
| [1107088.231166] rndis_host 1-2:1.0 usb0: register 'rndis_host' at usb-0000:00:14.0-2, RNDIS device, 9a:1f:85:1c:3d:0e |
| [1107088.339436] rndis_host 1-2:1.0 enp0s20u2: renamed from usb0 |
| [1107088.348699] systemd-udevd[7239]: renamed network interface usb0 to enp0s20u2 |
| [1107096.278615] usb 1-2: USB disconnect, device number 84 |
| [1107096.278687] rndis_host 1-2:1.0 enp0s20u2: unregister 'rndis_host' usb-0000:00:14.0-2, RNDIS device |
| [1107101.711096] usb 1-2: new full-speed USB device number 85 using xhci_hcd |
| [1107101.875142] usb 1-2: not running at top speed; connect to a high speed hub |
| [1107101.875910] usb 1-2: New USB device found, idVendor=0451, idProduct=6141 |
| [1107101.875916] usb 1-2: New USB device strings: Mfr=33, Product=37, SerialNumber=0 |
| [1107101.875919] usb 1-2: Product: AM335x USB |
| [1107101.875922] usb 1-2: Manufacturer: Texas Instruments |
| [1107101.930497] rndis_host 1-2:1.0 usb0: register 'rndis_host' at usb-0000:00:14.0-2, RNDIS device, 9a:1f:85:1c:3d:0e |
| [1107101.944539] rndis_host 1-2:1.0 enp0s20u2: renamed from usb0 |
| [1107101.957274] systemd-udevd[7262]: renamed network interface usb0 to enp0s20u2 |
| [1107102.538542] usb 1-2: USB disconnect, device number 85 |
| [1107102.538640] rndis_host 1-2:1.0 enp0s20u2: unregister 'rndis_host' usb-0000:00:14.0-2, RNDIS device |
| [1107230.983535] usb 1-2: new high-speed USB device number 86 using xhci_hcd |
| [1107231.148095] usb 1-2: New USB device found, idVendor=1d6b, idProduct=0104 |
| [1107231.148105] usb 1-2: New USB device strings: Mfr=2, Product=3, SerialNumber=4 |
| [1107231.148110] usb 1-2: Product: BeagleBoneBlack |
| [1107231.148114] usb 1-2: Manufacturer: Circuitco |
| [1107231.148118] usb 1-2: SerialNumber: 5C-3913BBBK0046 |
| [1107231.151068] rndis_host 1-2:1.0 eth0: register 'rndis_host' at usb-0000:00:14.0-2, RNDIS device, c8:a0:30:af:53:b9 |
| [1107231.151721] cdc_acm 1-2:1.2: This device cannot do calls on its own. It is not a modem. |
| [1107231.151794] cdc_acm 1-2:1.2: ttyACM0: USB ACM device |
| [1107231.152406] usb-storage 1-2:1.4: USB Mass Storage device detected |
| [1107231.153753] scsi host9: usb-storage 1-2:1.4 |
| [1107231.169842] rndis_host 1-2:1.0 enp0s20u2: renamed from eth0 |
| [1107231.179706] systemd-udevd[7493]: renamed network interface eth0 to enp0s20u2 |
| [1107232.155723] scsi 9:0:0:0: Direct-Access Linux File-CD Gadget 0308 PQ: 0 ANSI: 2 |
| [1107232.156092] sd 9:0:0:0: Attached scsi generic sg2 type 0 |
| [1107232.157022] sd 9:0:0:0: [sdc] 196608 512-byte logical blocks: (100 MB/96.0 MiB) |
| [1107232.157141] sd 9:0:0:0: [sdc] Write Protect is off |
| [1107232.157145] sd 9:0:0:0: [sdc] Mode Sense: 0f 00 00 00 |
| [1107232.157270] sd 9:0:0:0: [sdc] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA |
| [1107232.171239] sdc: |
| [1107232.172608] sd 9:0:0:0: [sdc] Attached SCSI removable disk |
| [1107232.563492] FAT-fs (sdc): Volume was not properly unmounted. Some data may be corrupt. Please run fsck. |
| [1107327.982862] usb 1-2: USB disconnect, device number 86 |
| [1107327.982984] rndis_host 1-2:1.0 enp0s20u2: unregister 'rndis_host' usb-0000:00:14.0-2, RNDIS device |
| [1107328.002840] sd 9:0:0:0: [sdc] Synchronizing SCSI cache |
| [1107328.002883] sd 9:0:0:0: [sdc] |
| [1107328.002886] Result: hostbyte=DID_NO_CONNECT driverbyte=DRIVER_OK |
| [1107333.333060] usb 1-2: new full-speed USB device number 87 using xhci_hcd |
| [1107333.497199] usb 1-2: not running at top speed; connect to a high speed hub |
| [1107333.497853] usb 1-2: New USB device found, idVendor=0451, idProduct=6141 |
| [1107333.497857] usb 1-2: New USB device strings: Mfr=33, Product=37, SerialNumber=0 |
| [1107333.497859] usb 1-2: Product: AM335x USB |
| [1107333.497862] usb 1-2: Manufacturer: Texas Instruments |
| [1107333.551042] rndis_host 1-2:1.0 usb0: register 'rndis_host' at usb-0000:00:14.0-2, RNDIS device, 9a:1f:85:1c:3d:0e |
| [1107333.561704] rndis_host 1-2:1.0 enp0s20u2: renamed from usb0 |
| [1107333.574213] systemd-udevd[7908]: renamed network interface usb0 to enp0s20u2 |
| [1107401.069858] usb 1-2: USB disconnect, device number 87 |
| [1107401.069961] rndis_host 1-2:1.0 enp0s20u2: unregister 'rndis_host' usb-0000:00:14.0-2, RNDIS device |
| [1107603.010533] usb 1-2: new high-speed USB device number 88 using xhci_hcd |
| [1107603.175014] usb 1-2: New USB device found, idVendor=1d6b, idProduct=0104 |
| [1107603.175019] usb 1-2: New USB device strings: Mfr=2, Product=3, SerialNumber=4 |
| [1107603.175022] usb 1-2: Product: BeagleBoneBlack |
| [1107603.175024] usb 1-2: Manufacturer: Circuitco |
| [1107603.175026] usb 1-2: SerialNumber: 5C-3913BBBK0046 |
| [1107603.177214] rndis_host 1-2:1.0 eth0: register 'rndis_host' at usb-0000:00:14.0-2, RNDIS device, c8:a0:30:af:53:b9 |
| [1107603.178032] cdc_acm 1-2:1.2: This device cannot do calls on its own. It is not a modem. |
| [1107603.178079] cdc_acm 1-2:1.2: ttyACM0: USB ACM device |
| [1107603.178970] usb-storage 1-2:1.4: USB Mass Storage device detected |
| [1107603.179196] scsi host10: usb-storage 1-2:1.4 |
| [1107603.194497] rndis_host 1-2:1.0 enp0s20u2: renamed from eth0 |
| [1107603.205309] systemd-udevd[8409]: renamed network interface eth0 to enp0s20u2 |
| [1107604.179713] scsi 10:0:0:0: Direct-Access Linux File-CD Gadget 0308 PQ: 0 ANSI: 2 |
| [1107604.185175] sd 10:0:0:0: [sdc] 196608 512-byte logical blocks: (100 MB/96.0 MiB) |
| [1107604.185483] sd 10:0:0:0: [sdc] Write Protect is off |
| [1107604.185488] sd 10:0:0:0: [sdc] Mode Sense: 0f 00 00 00 |
| [1107604.185514] sd 10:0:0:0: Attached scsi generic sg2 type 0 |
| [1107604.185743] sd 10:0:0:0: [sdc] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA |
| [1107604.189022] sdc: |
| [1107604.190168] sd 10:0:0:0: [sdc] Attached SCSI removable disk |
| [1107604.555583] FAT-fs (sdc): Volume was not properly unmounted. Some data may be corrupt. Please run fsck. |
| [1108441.069483] usb 1-2: USB disconnect, device number 88 |
| [1108441.069564] rndis_host 1-2:1.0 enp0s20u2: unregister 'rndis_host' usb-0000:00:14.0-2, RNDIS device |
| [1108441.082452] sd 10:0:0:0: [sdc] Synchronizing SCSI cache |
| [1108441.082492] sd 10:0:0:0: [sdc] |
| [1108441.082494] Result: hostbyte=DID_NO_CONNECT driverbyte=DRIVER_OK |
| [1108500.378320] usb 1-2: new high-speed USB device number 89 using xhci_hcd |
| [1108500.542916] usb 1-2: New USB device found, idVendor=1d6b, idProduct=0104 |
| [1108500.542925] usb 1-2: New USB device strings: Mfr=2, Product=3, SerialNumber=4 |
| [1108500.542930] usb 1-2: Product: BeagleBoneBlack |
| [1108500.542934] usb 1-2: Manufacturer: Circuitco |
| [1108500.542938] usb 1-2: SerialNumber: 5C-3913BBBK0046 |
| [1108500.545922] rndis_host 1-2:1.0 eth0: register 'rndis_host' at usb-0000:00:14.0-2, RNDIS device, c8:a0:30:af:53:b9 |
| [1108500.546653] cdc_acm 1-2:1.2: This device cannot do calls on its own. It is not a modem. |
| [1108500.546713] cdc_acm 1-2:1.2: ttyACM0: USB ACM device |
| [1108500.547328] usb-storage 1-2:1.4: USB Mass Storage device detected |
| [1108500.548246] scsi host11: usb-storage 1-2:1.4 |
| [1108500.561176] rndis_host 1-2:1.0 enp0s20u2: renamed from eth0 |
| [1108500.567447] systemd-udevd[10026]: renamed network interface eth0 to enp0s20u2 |
| [1108501.550570] scsi 11:0:0:0: Direct-Access Linux File-CD Gadget 0308 PQ: 0 ANSI: 2 |
| [1108501.551269] sd 11:0:0:0: Attached scsi generic sg2 type 0 |
| [1108501.558496] sd 11:0:0:0: [sdc] 196608 512-byte logical blocks: (100 MB/96.0 MiB) |
| [1108501.559408] sd 11:0:0:0: [sdc] Write Protect is off |
| [1108501.559414] sd 11:0:0:0: [sdc] Mode Sense: 0f 00 00 00 |
| [1108501.559616] sd 11:0:0:0: [sdc] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA |
| [1108501.563657] sdc: |
| [1108501.564707] sd 11:0:0:0: [sdc] Attached SCSI removable disk |
| [1116931.239947] usb 1-2: USB disconnect, device number 89 |
| [1116931.240027] rndis_host 1-2:1.0 enp0s20u2: unregister 'rndis_host' usb-0000:00:14.0-2, RNDIS device |
| [1116931.254252] sd 11:0:0:0: [sdc] Synchronizing SCSI cache |
| [1116931.254293] sd 11:0:0:0: [sdc] |
| [1116931.254295] Result: hostbyte=DID_NO_CONNECT driverbyte=DRIVER_OK |
| [1116931.286903] FAT-fs (sdc): unable to read boot sector to mark fs as dirty |
| [1116999.191266] usb 1-2: new high-speed USB device number 90 using xhci_hcd |
| [1116999.355864] usb 1-2: New USB device found, idVendor=1d6b, idProduct=0104 |
| [1116999.355874] usb 1-2: New USB device strings: Mfr=2, Product=3, SerialNumber=4 |
| [1116999.355879] usb 1-2: Product: BeagleBoneBlack |
| [1116999.355883] usb 1-2: Manufacturer: Circuitco |
| [1116999.355887] usb 1-2: SerialNumber: 5C-3913BBBK0046 |
| [1116999.358567] rndis_host 1-2:1.0 eth0: register 'rndis_host' at usb-0000:00:14.0-2, RNDIS device, c8:a0:30:af:53:b9 |
| [1116999.359976] cdc_acm 1-2:1.2: This device cannot do calls on its own. It is not a modem. |
| [1116999.360051] cdc_acm 1-2:1.2: ttyACM0: USB ACM device |
| [1116999.361106] usb-storage 1-2:1.4: USB Mass Storage device detected |
| [1116999.365204] scsi host12: usb-storage 1-2:1.4 |
| [1116999.388296] rndis_host 1-2:1.0 enp0s20u2: renamed from eth0 |
| [1116999.399403] systemd-udevd[22827]: renamed network interface eth0 to enp0s20u2 |
| [1117000.366633] scsi 12:0:0:0: Direct-Access Linux File-CD Gadget 0308 PQ: 0 ANSI: 2 |
| [1117000.367228] sd 12:0:0:0: Attached scsi generic sg2 type 0 |
| [1117000.375476] sd 12:0:0:0: [sdc] 196608 512-byte logical blocks: (100 MB/96.0 MiB) |
| [1117000.375653] sd 12:0:0:0: [sdc] Write Protect is off |
| [1117000.375659] sd 12:0:0:0: [sdc] Mode Sense: 0f 00 00 00 |
| [1117000.375826] sd 12:0:0:0: [sdc] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA |
| [1117000.391489] sdc: |
| [1117000.393787] sd 12:0:0:0: [sdc] Attached SCSI removable disk |
| [1117000.778203] FAT-fs (sdc): Volume was not properly unmounted. Some data may be corrupt. Please run fsck. |
| [1135239.901800] wlp1s0: deauthenticating from 9c:c1:72:10:42:7e by local choice (Reason: 3=DEAUTH_LEAVING) |
| [1135239.909752] cfg80211: Calling CRDA to update world regulatory domain |
| [1135239.942778] cfg80211: World regulatory domain updated: |
| [1135239.942784] cfg80211: DFS Master region: unset |
| [1135239.942786] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp), (dfs_cac_time) |
| [1135239.942790] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (N/A, 2000 mBm), (N/A) |
| [1135239.942793] cfg80211: (2457000 KHz - 2482000 KHz @ 40000 KHz), (N/A, 2000 mBm), (N/A) |
| [1135239.942795] cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (N/A, 2000 mBm), (N/A) |
| [1135239.942797] cfg80211: (5170000 KHz - 5250000 KHz @ 80000 KHz), (N/A, 2000 mBm), (N/A) |
| [1135239.942799] cfg80211: (5735000 KHz - 5835000 KHz @ 80000 KHz), (N/A, 2000 mBm), (N/A) |
| [1135239.942801] cfg80211: (57240000 KHz - 63720000 KHz @ 2160000 KHz), (N/A, 0 mBm), (N/A) |
| [1135239.942820] cfg80211: Calling CRDA for country: IE |
| [1135239.954666] cfg80211: Regulatory domain changed to country: IE |
| [1135239.954672] cfg80211: DFS Master region: unset |
| [1135239.954673] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp), (dfs_cac_time) |
| [1135239.954677] cfg80211: (2402000 KHz - 2482000 KHz @ 40000 KHz), (N/A, 2000 mBm), (N/A) |
| [1135239.954679] cfg80211: (5170000 KHz - 5250000 KHz @ 80000 KHz), (N/A, 2000 mBm), (N/A) |
| [1135239.954682] cfg80211: (5250000 KHz - 5330000 KHz @ 80000 KHz), (N/A, 2000 mBm), (0 s) |
| [1135239.954684] cfg80211: (5490000 KHz - 5710000 KHz @ 80000 KHz), (N/A, 2700 mBm), (0 s) |
| [1135239.954686] cfg80211: (57240000 KHz - 65880000 KHz @ 2160000 KHz), (N/A, 4000 mBm), (N/A) |
| [1135241.655645] PM: Syncing filesystems ... done. |
| [1135241.678553] Freezing user space processes ... (elapsed 0.001 seconds) done. |
| [1135241.680284] Freezing remaining freezable tasks ... (elapsed 0.001 seconds) done. |
| [1135241.681597] Suspending console(s) (use no_console_suspend to debug) |
| [1135241.681779] sd 12:0:0:0: [sdc] Synchronizing SCSI cache |
| [1135241.783831] sd 0:0:0:0: [sda] Synchronizing SCSI cache |
| [1135241.783965] sd 0:0:0:0: [sda] Stopping disk |
| [1135242.608002] PM: suspend of devices complete after 926.399 msecs |
| [1135242.621057] PM: late suspend of devices complete after 13.048 msecs |
| [1135242.622021] xhci_hcd 0000:00:14.0: System wakeup enabled by ACPI |
| [1135242.633235] PM: noirq suspend of devices complete after 12.176 msecs |
| [1135242.633631] ACPI: Preparing to enter system sleep state S3 |
| [1135242.634136] PM: Saving platform NVS memory |
| [1135242.634138] Disabling non-boot CPUs ... |
| [1135242.634191] intel_pstate CPU 1 exiting |
| [1135242.634497] Broke affinity for irq 41 |
| [1135242.634499] Broke affinity for irq 42 |
| [1135242.635524] kvm: disabling virtualization on CPU1 |
| [1135242.635540] smpboot: CPU 1 is now offline |
| [1135242.637646] ACPI: Low-level resume complete |
| [1135242.637707] PM: Restoring platform NVS memory |
| [1135242.638108] Enabling non-boot CPUs ... |
| [1135242.638154] x86: Booting SMP configuration: |
| [1135242.638155] smpboot: Booting Node 0 Processor 1 APIC 0x2 |
| [1135242.651575] CPU1 microcode updated early to revision 0x18, date = 2014-05-23 |
| [1135242.653034] kvm: enabling virtualization on CPU1 |
| [1135242.655488] CPU1 is up |
| [1135242.657294] ACPI: Waking up from system sleep state S3 |
| [1135242.668745] pci 0000:00:1d.0: Refused to change power state, currently in D3 |
| [1135242.668852] xhci_hcd 0000:00:14.0: System wakeup disabled by ACPI |
| [1135242.669055] PM: noirq resume of devices complete after 11.616 msecs |
| [1135242.674782] PM: early resume of devices complete after 5.701 msecs |
| [1135242.675186] snd_hda_intel 0000:00:03.0: irq 44 for MSI/MSI-X |
| [1135242.675438] snd_hda_intel 0000:00:1b.0: irq 45 for MSI/MSI-X |
| [1135242.675507] rtc_cmos 00:03: System wakeup disabled by ACPI |
| [1135242.675880] ath: phy0: ASPM enabled: 0x43 |
| [1135242.685692] sd 0:0:0:0: [sda] Starting disk |
| [1135242.990578] ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300) |
| [1135242.991285] ata1.00: configured for UDMA/133 |
| [1135243.024853] usb 1-3: reset high-speed USB device number 3 using xhci_hcd |
| [1135243.024965] xhci_hcd 0000:00:14.0: Setup ERROR: setup context command for slot 2. |
| [1135243.024968] usb 1-3: hub failed to enable device, error -22 |
| [1135243.177676] usb 1-3: reset high-speed USB device number 3 using xhci_hcd |
| [1135243.177743] xhci_hcd 0000:00:14.0: Setup ERROR: setup context command for slot 2. |
| [1135243.177747] usb 1-3: hub failed to enable device, error -22 |
| [1135243.330671] usb 1-3: reset high-speed USB device number 3 using xhci_hcd |
| [1135243.390890] xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff880172e61f60 |
| [1135243.393640] restoring control 00000000-0000-0000-0000-000000000101/10/5 |
| [1135243.495871] usb 1-4: reset full-speed USB device number 80 using xhci_hcd |
| [1135243.495898] xhci_hcd 0000:00:14.0: Setup ERROR: setup context command for slot 19. |
| [1135243.495902] usb 1-4: hub failed to enable device, error -22 |
| [1135243.648613] usb 1-4: reset full-speed USB device number 80 using xhci_hcd |
| [1135243.648635] xhci_hcd 0000:00:14.0: Setup ERROR: setup context command for slot 19. |
| [1135243.648639] usb 1-4: hub failed to enable device, error -22 |
| [1135243.801577] usb 1-4: reset full-speed USB device number 80 using xhci_hcd |
| [1135243.812962] usb 1-4: device firmware changed |
| [1135243.813221] PM: resume of devices complete after 1138.625 msecs |
| [1135243.813646] Restarting tasks ... done. |
| [1135243.831414] usb 1-4: USB disconnect, device number 80 |
| [1135243.832603] xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff8800074c0c00 |
| [1135243.832608] xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff8800074c0c90 |
| [1135243.832611] xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff8800074c0c48 |
| [1135243.832614] xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff880173ab3c48 |
| [1135243.832616] xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff880173ab3c00 |
| [1135243.985378] usb 1-4: new full-speed USB device number 91 using xhci_hcd |
| [1135244.151601] usb 1-4: string descriptor 0 malformed (err = -61), defaulting to 0x0409 |
| [1135244.153660] usb 1-4: New USB device found, idVendor=0cf3, idProduct=311e |
| [1135244.153666] usb 1-4: New USB device strings: Mfr=1, Product=2, SerialNumber=3 |
| [1135244.191867] usb 1-4: USB disconnect, device number 91 |
| [1135244.477340] usb 1-4: new full-speed USB device number 92 using xhci_hcd |
| [1135244.643018] usb 1-4: string descriptor 0 malformed (err = -61), defaulting to 0x0409 |
| [1135244.644840] usb 1-4: New USB device found, idVendor=0cf3, idProduct=311e |
| [1135244.644844] usb 1-4: New USB device strings: Mfr=1, Product=2, SerialNumber=3 |
| [1135250.113911] wlp1s0: authenticate with 9c:c1:72:10:42:7e |
| [1135250.127137] wlp1s0: send auth to 9c:c1:72:10:42:7e (try 1/3) |
| [1135250.130591] wlp1s0: authenticated |
| [1135250.131331] wlp1s0: associate with 9c:c1:72:10:42:7e (try 1/3) |
| [1135250.136924] wlp1s0: RX AssocResp from 9c:c1:72:10:42:7e (capab=0x411 status=0 aid=4) |
| [1135250.137016] wlp1s0: associated |
| [1154727.762708] wlp1s0: deauthenticating from 9c:c1:72:10:42:7e by local choice (Reason: 3=DEAUTH_LEAVING) |
| [1154727.776568] cfg80211: Calling CRDA to update world regulatory domain |
| [1154727.789122] cfg80211: World regulatory domain updated: |
| [1154727.789128] cfg80211: DFS Master region: unset |
| [1154727.789130] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp), (dfs_cac_time) |
| [1154727.789135] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (N/A, 2000 mBm), (N/A) |
| [1154727.789139] cfg80211: (2457000 KHz - 2482000 KHz @ 40000 KHz), (N/A, 2000 mBm), (N/A) |
| [1154727.789141] cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (N/A, 2000 mBm), (N/A) |
| [1154727.789144] cfg80211: (5170000 KHz - 5250000 KHz @ 80000 KHz), (N/A, 2000 mBm), (N/A) |
| [1154727.789147] cfg80211: (5735000 KHz - 5835000 KHz @ 80000 KHz), (N/A, 2000 mBm), (N/A) |
| [1154727.789150] cfg80211: (57240000 KHz - 63720000 KHz @ 2160000 KHz), (N/A, 0 mBm), (N/A) |
| [1154727.789264] cfg80211: Calling CRDA for country: IE |
| [1154727.798533] cfg80211: Regulatory domain changed to country: IE |
| [1154727.798540] cfg80211: DFS Master region: unset |
| [1154727.798542] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp), (dfs_cac_time) |
| [1154727.798547] cfg80211: (2402000 KHz - 2482000 KHz @ 40000 KHz), (N/A, 2000 mBm), (N/A) |
| [1154727.798550] cfg80211: (5170000 KHz - 5250000 KHz @ 80000 KHz), (N/A, 2000 mBm), (N/A) |
| [1154727.798553] cfg80211: (5250000 KHz - 5330000 KHz @ 80000 KHz), (N/A, 2000 mBm), (0 s) |
| [1154727.798556] cfg80211: (5490000 KHz - 5710000 KHz @ 80000 KHz), (N/A, 2700 mBm), (0 s) |
| [1154727.798559] cfg80211: (57240000 KHz - 65880000 KHz @ 2160000 KHz), (N/A, 4000 mBm), (N/A) |
| [1154732.665830] PM: Syncing filesystems ... done. |
| [1154732.684604] Freezing user space processes ... (elapsed 0.001 seconds) done. |
| [1154732.686402] Freezing remaining freezable tasks ... (elapsed 0.001 seconds) done. |
| [1154732.687743] Suspending console(s) (use no_console_suspend to debug) |
| [1154732.687980] sd 12:0:0:0: [sdc] Synchronizing SCSI cache |
| [1154732.790120] sd 0:0:0:0: [sda] Synchronizing SCSI cache |
| [1154732.887370] sd 0:0:0:0: [sda] Stopping disk |
| [1154733.461611] PM: suspend of devices complete after 773.844 msecs |
| [1154733.472651] PM: late suspend of devices complete after 11.032 msecs |
| [1154733.473592] xhci_hcd 0000:00:14.0: System wakeup enabled by ACPI |
| [1154733.484884] PM: noirq suspend of devices complete after 12.231 msecs |
| [1154733.485279] ACPI: Preparing to enter system sleep state S3 |
| [1154733.485773] PM: Saving platform NVS memory |
| [1154733.485774] Disabling non-boot CPUs ... |
| [1154733.485827] intel_pstate CPU 1 exiting |
| [1154733.486197] Broke affinity for irq 41 |
| [1154733.486199] Broke affinity for irq 42 |
| [1154733.487230] kvm: disabling virtualization on CPU1 |
| [1154733.487250] smpboot: CPU 1 is now offline |
| [1154733.489570] ACPI: Low-level resume complete |
| [1154733.489630] PM: Restoring platform NVS memory |
| [1154733.490033] Enabling non-boot CPUs ... |
| [1154733.490080] x86: Booting SMP configuration: |
| [1154733.490081] smpboot: Booting Node 0 Processor 1 APIC 0x2 |
| [1154733.503494] CPU1 microcode updated early to revision 0x18, date = 2014-05-23 |
| [1154733.504954] kvm: enabling virtualization on CPU1 |
| [1154733.507409] CPU1 is up |
| [1154733.509215] ACPI: Waking up from system sleep state S3 |
| [1154733.520369] pci 0000:00:1d.0: Refused to change power state, currently in D3 |
| [1154733.521373] xhci_hcd 0000:00:14.0: System wakeup disabled by ACPI |
| [1154733.521526] PM: noirq resume of devices complete after 12.105 msecs |
| [1154733.527523] PM: early resume of devices complete after 5.971 msecs |
| [1154733.527932] snd_hda_intel 0000:00:03.0: irq 44 for MSI/MSI-X |
| [1154733.528193] snd_hda_intel 0000:00:1b.0: irq 45 for MSI/MSI-X |
| [1154733.528261] rtc_cmos 00:03: System wakeup disabled by ACPI |
| [1154733.528635] ath: phy0: ASPM enabled: 0x43 |
| [1154733.538385] sd 0:0:0:0: [sda] Starting disk |
| [1154733.843346] ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300) |
| [1154733.844087] ata1.00: configured for UDMA/133 |
| [1154733.877441] usb 1-4: reset full-speed USB device number 92 using xhci_hcd |
| [1154733.877453] xhci_hcd 0000:00:14.0: Setup ERROR: setup context command for slot 1. |
| [1154733.877455] usb 1-4: hub failed to enable device, error -22 |
| [1154734.030429] usb 1-4: reset full-speed USB device number 92 using xhci_hcd |
| [1154734.030448] xhci_hcd 0000:00:14.0: Setup ERROR: setup context command for slot 1. |
| [1154734.030451] usb 1-4: hub failed to enable device, error -22 |
| [1154734.183403] usb 1-4: reset full-speed USB device number 92 using xhci_hcd |
| [1154734.194754] usb 1-4: device firmware changed |
| [1154734.347585] usb 1-3: reset high-speed USB device number 3 using xhci_hcd |
| [1154734.347611] xhci_hcd 0000:00:14.0: Setup ERROR: setup context command for slot 2. |
| [1154734.347615] usb 1-3: hub failed to enable device, error -22 |
| [1154734.500298] usb 1-3: reset high-speed USB device number 3 using xhci_hcd |
| [1154734.500455] xhci_hcd 0000:00:14.0: Setup ERROR: setup context command for slot 2. |
| [1154734.500460] usb 1-3: hub failed to enable device, error -22 |
| [1154734.653352] usb 1-3: reset high-speed USB device number 3 using xhci_hcd |
| [1154734.712822] xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff880172e61f60 |
| [1154734.715340] restoring control 00000000-0000-0000-0000-000000000101/10/5 |
| [1154734.719761] PM: resume of devices complete after 1192.435 msecs |
| [1154734.720171] Restarting tasks ... done. |
| [1154734.737156] usb 1-4: USB disconnect, device number 92 |
| [1154734.738732] xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff88007a061500 |
| [1154734.738739] xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff88007a061590 |
| [1154734.738743] xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff88007a061548 |
| [1154734.738746] xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff880079b91708 |
| [1154734.738749] xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff880079b916c0 |
| [1154734.892109] usb 1-4: new full-speed USB device number 93 using xhci_hcd |
| [1154735.057614] usb 1-4: string descriptor 0 malformed (err = -61), defaulting to 0x0409 |
| [1154735.059555] usb 1-4: New USB device found, idVendor=0cf3, idProduct=311e |
| [1154735.059559] usb 1-4: New USB device strings: Mfr=1, Product=2, SerialNumber=3 |
| [1154735.097089] usb 1-4: USB disconnect, device number 93 |
| [1154735.380063] usb 1-4: new full-speed USB device number 94 using xhci_hcd |
| [1154735.545498] usb 1-4: string descriptor 0 malformed (err = -61), defaulting to 0x0409 |
| [1154735.547396] usb 1-4: New USB device found, idVendor=0cf3, idProduct=311e |
| [1154735.547401] usb 1-4: New USB device strings: Mfr=1, Product=2, SerialNumber=3 |
| [1154740.900923] wlp1s0: authenticate with 9c:c1:72:10:42:7e |
| [1154740.913519] wlp1s0: send auth to 9c:c1:72:10:42:7e (try 1/3) |
| [1154740.915820] wlp1s0: authenticated |
| [1154740.917526] wlp1s0: associate with 9c:c1:72:10:42:7e (try 1/3) |
| [1154740.921210] wlp1s0: RX AssocResp from 9c:c1:72:10:42:7e (capab=0x411 status=0 aid=7) |
| [1154740.921294] wlp1s0: associated |