| [ 0.000000] Initializing cgroup subsys cpuset |
| [ 0.000000] Initializing cgroup subsys cpu |
| [ 0.000000] Initializing cgroup subsys cpuacct |
| [ 0.000000] Linux version 3.16.0-4-amd64 (debian-kernel@lists.debian.org) (gcc version 4.8.4 (Debian 4.8.4-1) ) #1 SMP Debian 3.16.7-ckt7-1 (2015-03-01) |
| [ 0.000000] Command line: root=/dev/nfs initrd=initrd-cb-test-tgt rootfstype=nfs nfsroot=10.100.1.1:/nfsroots/cb-test-tgt-01,v3,hard,nointr,tcp ip=10.100.1.10::10.100.1.1:255.255.255.0:embed-o-matic:eth0:off console=ttyS0,115200n8 consoleblank=0 rw BOOT_IMAGE=vmlinuz-cb-test-tgt |
| [ 0.000000] e820: BIOS-provided physical RAM map: |
| [ 0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009fbff] usable |
| [ 0.000000] BIOS-e820: [mem 0x000000000009fc00-0x000000000009ffff] reserved |
| [ 0.000000] BIOS-e820: [mem 0x00000000000f0000-0x00000000000fffff] reserved |
| [ 0.000000] BIOS-e820: [mem 0x0000000000100000-0x000000001ff9ffff] usable |
| [ 0.000000] BIOS-e820: [mem 0x000000001ffa0000-0x000000001fffffff] reserved |
| [ 0.000000] BIOS-e820: [mem 0x00000000b0000000-0x00000000bfffffff] reserved |
| [ 0.000000] NX (Execute Disable) protection: active |
| [ 0.000000] SMBIOS 2.7 present. |
| [ 0.000000] DMI: Qemu q35/q35, BIOS RAPTOR-NORMAL 12/01/2015 |
| [ 0.000000] Hypervisor detected: KVM |
| [ 0.000000] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved |
| [ 0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable |
| [ 0.000000] AGP: No AGP bridge found |
| [ 0.000000] e820: last_pfn = 0x1ffa0 max_arch_pfn = 0x400000000 |
| [ 0.000000] MTRR default type: uncachable |
| [ 0.000000] MTRR fixed ranges disabled: |
| [ 0.000000] 00000-FFFFF uncachable |
| [ 0.000000] MTRR variable ranges disabled: |
| [ 0.000000] 0 disabled |
| [ 0.000000] 1 disabled |
| [ 0.000000] 2 disabled |
| [ 0.000000] 3 disabled |
| [ 0.000000] 4 disabled |
| [ 0.000000] 5 disabled |
| [ 0.000000] 6 disabled |
| [ 0.000000] 7 disabled |
| [ 0.000000] PAT not supported by CPU. |
| [ 0.000000] CPU MTRRs all blank - virtualized system. |
| [ 0.000000] Base memory trampoline at [ffff880000099000] 99000 size 24576 |
| [ 0.000000] init_memory_mapping: [mem 0x00000000-0x000fffff] |
| [ 0.000000] [mem 0x00000000-0x000fffff] page 4k |
| [ 0.000000] BRK [0x01af3000, 0x01af3fff] PGTABLE |
| [ 0.000000] BRK [0x01af4000, 0x01af4fff] PGTABLE |
| [ 0.000000] BRK [0x01af5000, 0x01af5fff] PGTABLE |
| [ 0.000000] init_memory_mapping: [mem 0x1f200000-0x1f3fffff] |
| [ 0.000000] [mem 0x1f200000-0x1f3fffff] page 2M |
| [ 0.000000] init_memory_mapping: [mem 0x1c000000-0x1f1fffff] |
| [ 0.000000] [mem 0x1c000000-0x1f1fffff] page 2M |
| [ 0.000000] init_memory_mapping: [mem 0x00100000-0x1bffffff] |
| [ 0.000000] [mem 0x00100000-0x001fffff] page 4k |
| [ 0.000000] [mem 0x00200000-0x1bffffff] page 2M |
| [ 0.000000] init_memory_mapping: [mem 0x1f400000-0x1ff9ffff] |
| [ 0.000000] [mem 0x1f400000-0x1fdfffff] page 2M |
| [ 0.000000] [mem 0x1fe00000-0x1ff9ffff] page 4k |
| [ 0.000000] BRK [0x01af6000, 0x01af6fff] PGTABLE |
| [ 0.000000] RAMDISK: [mem 0x1f5f2000-0x1fe7bfff] |
| [ 0.000000] ACPI: Early table checksum verification disabled |
| [ 0.000000] ACPI: RSDP 0x00000000000F1900 000024 (v02 CORE ) |
| [ 0.000000] ACPI: XSDT 0x000000001FFB90E0 00004C (v01 CORE COREBOOT 00000000 CORE 00000000) |
| [ 0.000000] ACPI: FACP 0x000000001FFBADC0 0000F4 (v03 CORE COREBOOT 00000000 CORE 00000000) |
| [ 0.000000] ACPI: DSDT 0x000000001FFB9280 001B38 (v01 CORE COREBOOT 00000002 INTL 20150204) |
| [ 0.000000] ACPI: FACS 0x000000001FFB9240 000040 |
| [ 0.000000] ACPI: MCFG 0x000000001FFBAEC0 00003C (v01 CORE COREBOOT 00000000 CORE 00000000) |
| [ 0.000000] ACPI: TCPA 0x000000001FFBAF00 000032 (v02 CORE COREBOOT 00000000 CORE 00000000) |
| [ 0.000000] ACPI: APIC 0x000000001FFBAF40 000054 (v01 CORE COREBOOT 00000000 CORE 00000000) |
| [ 0.000000] ACPI: HPET 0x000000001FFBAFA0 000038 (v01 CORE COREBOOT 00000000 CORE 00000000) |
| [ 0.000000] ACPI: Local APIC address 0xfee00000 |
| [ 0.000000] No NUMA configuration found |
| [ 0.000000] Faking a node at [mem 0x0000000000000000-0x000000001ff9ffff] |
| [ 0.000000] Initmem setup node 0 [mem 0x00000000-0x1ff9ffff] |
| [ 0.000000] NODE_DATA [mem 0x1ff9b000-0x1ff9ffff] |
| [ 0.000000] kvm-clock: Using msrs 4b564d01 and 4b564d00 |
| [ 0.000000] kvm-clock: cpu 0, msr 0:1ff93001, primary cpu clock |
| [ 0.000000] [ffffea0000000000-ffffea00007fffff] PMD -> [ffff88001e400000-ffff88001ebfffff] on node 0 |
| [ 0.000000] Zone ranges: |
| [ 0.000000] DMA [mem 0x00001000-0x00ffffff] |
| [ 0.000000] DMA32 [mem 0x01000000-0xffffffff] |
| [ 0.000000] Normal empty |
| [ 0.000000] Movable zone start for each node |
| [ 0.000000] Early memory node ranges |
| [ 0.000000] node 0: [mem 0x00001000-0x0009efff] |
| [ 0.000000] node 0: [mem 0x00100000-0x1ff9ffff] |
| [ 0.000000] On node 0 totalpages: 130878 |
| [ 0.000000] DMA zone: 56 pages used for memmap |
| [ 0.000000] DMA zone: 21 pages reserved |
| [ 0.000000] DMA zone: 3998 pages, LIFO batch:0 |
| [ 0.000000] DMA32 zone: 1735 pages used for memmap |
| [ 0.000000] DMA32 zone: 126880 pages, LIFO batch:31 |
| [ 0.000000] ACPI: PM-Timer IO Port: 0x608 |
| [ 0.000000] ACPI: Local APIC address 0xfee00000 |
| [ 0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled) |
| [ 0.000000] ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0]) |
| [ 0.000000] IOAPIC[0]: apic_id 2, version 17, address 0xfec00000, GSI 0-23 |
| [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) |
| [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level) |
| [ 0.000000] ACPI: IRQ0 used by override. |
| [ 0.000000] ACPI: IRQ2 used by override. |
| [ 0.000000] ACPI: IRQ9 used by override. |
| [ 0.000000] Using ACPI (MADT) for SMP configuration information |
| [ 0.000000] ACPI: HPET id: 0x8086a201 base: 0xfed00000 |
| [ 0.000000] smpboot: Allowing 1 CPUs, 0 hotplug CPUs |
| [ 0.000000] nr_irqs_gsi: 40 |
| [ 0.000000] PM: Registered nosave memory: [mem 0x0009f000-0x0009ffff] |
| [ 0.000000] PM: Registered nosave memory: [mem 0x000a0000-0x000effff] |
| [ 0.000000] PM: Registered nosave memory: [mem 0x000f0000-0x000fffff] |
| [ 0.000000] e820: [mem 0x20000000-0xafffffff] available for PCI devices |
| [ 0.000000] Booting paravirtualized kernel on KVM |
| [ 0.000000] setup_percpu: NR_CPUS:512 nr_cpumask_bits:512 nr_cpu_ids:1 nr_node_ids:1 |
| [ 0.000000] PERCPU: Embedded 27 pages/cpu @ffff88001f200000 s80896 r8192 d21504 u2097152 |
| [ 0.000000] pcpu-alloc: s80896 r8192 d21504 u2097152 alloc=1*2097152 |
| [ 0.000000] pcpu-alloc: [0] 0 |
| [ 0.000000] KVM setup async PF for cpu 0 |
| [ 0.000000] kvm-stealtime: cpu 0, msr 1f20d080 |
| [ 0.000000] Built 1 zonelists in Node order, mobility grouping on. Total pages: 129066 |
| [ 0.000000] Policy zone: DMA32 |
| [ 0.000000] Kernel command line: root=/dev/nfs initrd=initrd-cb-test-tgt rootfstype=nfs nfsroot=10.100.1.1:/nfsroots/cb-test-tgt-01,v3,hard,nointr,tcp ip=10.100.1.10::10.100.1.1:255.255.255.0:embed-o-matic:eth0:off console=ttyS0,115200n8 consoleblank=0 rw BOOT_IMAGE=vmlinuz-cb-test-tgt |
| [ 0.000000] PID hash table entries: 2048 (order: 2, 16384 bytes) |
| [ 0.000000] AGP: Checking aperture... |
| [ 0.000000] AGP: No AGP bridge found |
| [ 0.000000] Calgary: detecting Calgary via BIOS EBDA area |
| [ 0.000000] Calgary: Unable to locate Rio Grande table in EBDA - bailing! |
| [ 0.000000] Memory: 494868K/523512K available (5203K kernel code, 943K rwdata, 1832K rodata, 1204K init, 840K bss, 28644K reserved) |
| [ 0.000000] Hierarchical RCU implementation. |
| [ 0.000000] RCU dyntick-idle grace-period acceleration is enabled. |
| [ 0.000000] RCU restricting CPUs from NR_CPUS=512 to nr_cpu_ids=1. |
| [ 0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=1 |
| [ 0.000000] NR_IRQS:33024 nr_irqs:256 16 |
| [ 0.000000] Console: colour VGA+ 80x25 |
| [ 0.000000] console [ttyS0] enabled |
| [ 0.000000] hpet clockevent registered |
| [ 0.000000] tsc: Detected 2393.998 MHz processor |
| [ 0.008000] Calibrating delay loop (skipped) preset value.. 4787.99 BogoMIPS (lpj=9575992) |
| [ 0.008000] pid_max: default: 32768 minimum: 301 |
| [ 0.008012] ACPI: Core revision 20140424 |
| [ 0.009954] ACPI: All ACPI Tables successfully acquired |
| [ 0.011288] Security Framework initialized |
| [ 0.012011] AppArmor: AppArmor disabled by boot time parameter |
| [ 0.013419] Yama: disabled by default; enable with sysctl kernel.yama.* |
| [ 0.015051] Dentry cache hash table entries: 65536 (order: 7, 524288 bytes) |
| [ 0.016103] Inode-cache hash table entries: 32768 (order: 6, 262144 bytes) |
| [ 0.017817] Mount-cache hash table entries: 1024 (order: 1, 8192 bytes) |
| [ 0.020007] Mountpoint-cache hash table entries: 1024 (order: 1, 8192 bytes) |
| [ 0.021882] Initializing cgroup subsys memory |
| [ 0.022960] Initializing cgroup subsys devices |
| [ 0.024013] Initializing cgroup subsys freezer |
| [ 0.025105] Initializing cgroup subsys net_cls |
| [ 0.026188] Initializing cgroup subsys blkio |
| [ 0.028009] Initializing cgroup subsys perf_event |
| [ 0.029170] Initializing cgroup subsys net_prio |
| [ 0.030334] mce: CPU supports 10 MCE banks |
| [ 0.031372] Last level iTLB entries: 4KB 0, 2MB 0, 4MB 0 |
| Last level dTLB entries: 4KB 0, 2MB 0, 4MB 0, 1GB 0 |
| tlb_flushall_shift: 6 |
| [ 0.043313] Freeing SMP alternatives memory: 20K (ffffffff81a1a000 - ffffffff81a1f000) |
| [ 0.048235] ftrace: allocating 21601 entries in 85 pages |
| [ 0.056967] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=0 pin2=0 |
| [ 0.058343] smpboot: CPU0: Intel QEMU Virtual CPU version 2.0.0 (fam: 06, model: 02, stepping: 03) |
| [ 0.064000] Performance Events: unsupported p6 CPU model 2 no PMU driver, software events only. |
| [ 0.064000] x86: Booted up 1 node, 1 CPUs |
| [ 0.064003] smpboot: Total of 1 processors activated (4787.99 BogoMIPS) |
| [ 0.065870] NMI watchdog: disabled (cpu0): hardware events not enabled |
| [ 0.067481] devtmpfs: initialized |
| [ 0.073064] pinctrl core: initialized pinctrl subsystem |
| [ 0.074368] NET: Registered protocol family 16 |
| [ 0.075531] cpuidle: using governor ladder |
| [ 0.076012] cpuidle: using governor menu |
| [ 0.077005] ACPI: bus type PCI registered |
| [ 0.077954] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5 |
| [ 0.080100] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xb0000000-0xbfffffff] (base 0xb0000000) |
| [ 0.082285] PCI: MMCONFIG at [mem 0xb0000000-0xbfffffff] reserved in E820 |
| [ 0.084345] PCI: Using configuration type 1 for base access |
| [ 0.086398] ACPI: Added _OSI(Module Device) |
| [ 0.087403] ACPI: Added _OSI(Processor Device) |
| [ 0.088003] ACPI: Added _OSI(3.0 _SCP Extensions) |
| [ 0.089205] ACPI: Added _OSI(Processor Aggregator Device) |
| [ 0.093236] ACPI: Interpreter enabled |
| [ 0.094117] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S1_] (20140424/hwxface-580) |
| [ 0.096004] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S2_] (20140424/hwxface-580) |
| [ 0.098207] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S3_] (20140424/hwxface-580) |
| [ 0.100549] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S4_] (20140424/hwxface-580) |
| [ 0.102746] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S5_] (20140424/hwxface-580) |
| [ 0.104531] ACPI: (supports S0) |
| [ 0.105270] ACPI: Using IOAPIC for interrupt routing |
| [ 0.106453] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug |
| [ 0.109766] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff]) |
| [ 0.112006] acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI] |
| [ 0.114121] acpi PNP0A08:00: _OSC: OS now controls [PCIeHotplug PME AER PCIeCapability] |
| [ 0.116102] PCI host bridge to bus 0000:00 |
| [ 0.117075] pci_bus 0000:00: root bus resource [bus 00-ff] |
| [ 0.118359] pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7] |
| [ 0.120004] pci_bus 0000:00: root bus resource [io 0x0d00-0xffff] |
| [ 0.121456] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff] |
| [ 0.123055] pci_bus 0000:00: root bus resource [mem 0xe0000000-0xfebfffff] |
| [ 0.124035] pci 0000:00:00.0: [8086:29c0] type 00 class 0x060000 |
| [ 0.124316] pci 0000:00:01.0: [1013:00b8] type 00 class 0x030000 |
| [ 0.126587] pci 0000:00:01.0: reg 0x10: [mem 0xfc000000-0xfdffffff pref] |
| [ 0.129064] pci 0000:00:01.0: reg 0x14: [mem 0xfe070000-0xfe070fff] |
| [ 0.140004] pci 0000:00:01.0: reg 0x30: [mem 0xfe060000-0xfe06ffff pref] |
| [ 0.140140] pci 0000:00:02.0: [8086:100e] type 00 class 0x020000 |
| [ 0.142112] pci 0000:00:02.0: reg 0x10: [mem 0xfe040000-0xfe05ffff] |
| [ 0.144004] pci 0000:00:02.0: reg 0x14: [io 0x5800-0x583f] |
| [ 0.153982] pci 0000:00:02.0: reg 0x30: [mem 0xfe000000-0xfe03ffff pref] |
| [ 0.154268] pci 0000:00:1f.0: [8086:2918] type 00 class 0x060100 |
| [ 0.154554] pci 0000:00:1f.0: quirk: [io 0x0600-0x067f] claimed by ICH6 ACPI/GPIO/TCO |
| [ 0.156020] pci 0000:00:1f.0: quirk: [io 0x0580-0x05bf] claimed by ICH6 GPIO |
| [ 0.157872] pci 0000:00:1f.2: [8086:2922] type 00 class 0x010601 |
| [ 0.168004] pci 0000:00:1f.2: reg 0x20: [io 0x5840-0x585f] |
| [ 0.169956] pci 0000:00:1f.2: reg 0x24: [mem 0xfe071000-0xfe071fff] |
| [ 0.172304] pci 0000:00:1f.3: [8086:2930] type 00 class 0x0c0500 |
| [ 0.172456] pci 0000:00:1f.3: reg 0x20: [io 0x0000-0x003f] |
| [ 0.172877] ACPI: PCI Interrupt Link [LNKA] (IRQs 5 10 11) *0 |
| [ 0.174417] ACPI: PCI Interrupt Link [LNKB] (IRQs 5 10 11) *0 |
| [ 0.176151] ACPI: PCI Interrupt Link [LNKC] (IRQs 5 10 11) *0 |
| [ 0.177694] ACPI: PCI Interrupt Link [LNKD] (IRQs 5 10 11) *0 |
| [ 0.179227] ACPI: PCI Interrupt Link [LNKE] (IRQs 5 10 11) *0 |
| [ 0.180499] ACPI: PCI Interrupt Link [LNKF] (IRQs 5 10 11) *0 |
| [ 0.182035] ACPI: PCI Interrupt Link [LNKG] (IRQs 5 10 11) *0 |
| [ 0.183568] ACPI: PCI Interrupt Link [LNKH] (IRQs 5 10 11) *0 |
| [ 0.184426] ACPI: PCI Interrupt Link [GSIA] (IRQs *16) |
| [ 0.185684] ACPI: PCI Interrupt Link [GSIB] (IRQs *17) |
| [ 0.186944] ACPI: PCI Interrupt Link [GSIC] (IRQs *18) |
| [ 0.188206] ACPI: PCI Interrupt Link [GSID] (IRQs *19) |
| [ 0.189466] ACPI: PCI Interrupt Link [GSIE] (IRQs *20) |
| [ 0.190729] ACPI: PCI Interrupt Link [GSIF] (IRQs *21) |
| [ 0.192205] ACPI: PCI Interrupt Link [GSIG] (IRQs *22) |
| [ 0.193459] ACPI: PCI Interrupt Link [GSIH] (IRQs *23) |
| [ 0.194890] ACPI: Enabled 16 GPEs in block 00 to 3F |
| [ 0.196101] vgaarb: setting as boot device: PCI:0000:00:01.0 |
| [ 0.197421] vgaarb: device added: PCI:0000:00:01.0,decodes=io+mem,owns=io+mem,locks=none |
| [ 0.200003] vgaarb: loaded |
| [ 0.200655] vgaarb: bridge control possible 0000:00:01.0 |
| [ 0.201946] PCI: Using ACPI for IRQ routing |
| [ 0.249178] PCI: pci_cache_line_size set to 64 bytes |
| [ 0.249253] e820: reserve RAM buffer [mem 0x0009fc00-0x0009ffff] |
| [ 0.249255] e820: reserve RAM buffer [mem 0x1ffa0000-0x1fffffff] |
| [ 0.249393] HPET: 3 timers in total, 0 timers will be used for per-cpu timer |
| [ 0.250156] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0 |
| [ 0.250685] hpet0: 3 comparators, 64-bit 100.000000 MHz counter |
| [ 0.255150] Switched to clocksource kvm-clock |
| [ 0.257624] pnp: PnP ACPI init |
| [ 0.258143] ACPI: bus type PNP registered |
| [ 0.258834] pnp 00:00: Plug and Play ACPI device, IDs PNP0b00 (active) |
| [ 0.258887] pnp 00:01: Plug and Play ACPI device, IDs PNP0303 (active) |
| [ 0.258933] pnp 00:02: Plug and Play ACPI device, IDs PNP0f13 (active) |
| [ 0.259031] pnp 00:03: Plug and Play ACPI device, IDs PNP0400 (active) |
| [ 0.259101] pnp 00:04: Plug and Play ACPI device, IDs PNP0501 (active) |
| [ 0.259366] pnp: PnP ACPI: found 5 devices |
| [ 0.260042] ACPI: bus type PNP unregistered |
| [ 0.266918] pci 0000:00:1f.3: BAR 4: assigned [io 0x1000-0x103f] |
| [ 0.267891] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7] |
| [ 0.267893] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff] |
| [ 0.267895] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff] |
| [ 0.267896] pci_bus 0000:00: resource 7 [mem 0xe0000000-0xfebfffff] |
| [ 0.267920] NET: Registered protocol family 2 |
| [ 0.268777] TCP established hash table entries: 4096 (order: 3, 32768 bytes) |
| [ 0.269901] TCP bind hash table entries: 4096 (order: 4, 65536 bytes) |
| [ 0.270905] TCP: Hash tables configured (established 4096 bind 4096) |
| [ 0.271896] TCP: reno registered |
| [ 0.272427] UDP hash table entries: 256 (order: 1, 8192 bytes) |
| [ 0.273344] UDP-Lite hash table entries: 256 (order: 1, 8192 bytes) |
| [ 0.274348] NET: Registered protocol family 1 |
| [ 0.275059] pci 0000:00:01.0: Video device with shadowed ROM |
| [ 0.275096] PCI: CLS 64 bytes, default 64 |
| [ 0.275134] Unpacking initramfs... |
| [ 0.435913] Freeing initrd memory: 8744K (ffff88001f5f2000 - ffff88001fe7c000) |
| [ 0.437287] microcode: CPU0 sig=0x623, pf=0x0, revision=0x1 |
| [ 0.438205] microcode: Microcode Update Driver: v2.00 <tigran@aivazian.fsnet.co.uk>, Peter Oruba |
| [ 0.439776] futex hash table entries: 256 (order: 2, 16384 bytes) |
| [ 0.440769] audit: initializing netlink subsys (disabled) |
| [ 0.441643] audit: type=2000 audit(1454522748.711:1): initialized |
| [ 0.442843] HugeTLB registered 2 MB page size, pre-allocated 0 pages |
| [ 0.443859] zbud: loaded |
| [ 0.444428] VFS: Disk quotas dquot_6.5.2 |
| [ 0.445064] Dquot-cache hash table entries: 512 (order 0, 4096 bytes) |
| [ 0.446120] msgmni has been set to 983 |
| [ 0.446958] alg: No test for stdrng (krng) |
| [ 0.447633] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252) |
| [ 0.448845] io scheduler noop registered |
| [ 0.449478] io scheduler deadline registered |
| [ 0.450168] io scheduler cfq registered (default) |
| [ 0.450963] pci_hotplug: PCI Hot Plug PCI Core version: 0.5 |
| [ 0.451857] pciehp: PCI Express Hot Plug Controller Driver version: 0.4 |
| [ 0.452948] intel_idle: does not run on family 6 model 2 |
| [ 0.452972] GHES: HEST is not enabled! |
| [ 0.453645] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled |
| [ 0.480969] 00:04: ttyS0 at I/O 0x3f8 (irq = 4, base_baud = 115200) is a 16550A |
| [ 0.482433] Linux agpgart interface v0.103 |
| [ 0.483184] i8042: PNP: PS/2 Controller [PNP0303:KBD,PNP0f13:MOU] at 0x60,0x64 irq 1,12 |
| [ 0.485064] serio: i8042 KBD port at 0x60,0x64 irq 1 |
| [ 0.485847] serio: i8042 AUX port at 0x60,0x64 irq 12 |
| [ 0.486791] mousedev: PS/2 mouse device common for all mice |
| [ 0.487915] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input0 |
| [ 0.489459] rtc_cmos 00:00: RTC can wake from S4 |
| [ 0.490414] rtc_cmos 00:00: rtc core: registered rtc_cmos as rtc0 |
| [ 0.491508] rtc_cmos 00:00: alarms up to one month, y3k, 114 bytes nvram, hpet irqs |
| [ 0.492739] ledtrig-cpu: registered to indicate activity on CPUs |
| [ 0.493739] AMD IOMMUv2 driver by Joerg Roedel <joerg.roedel@amd.com> |
| [ 0.494743] AMD IOMMUv2 functionality not available on this system |
| [ 0.495787] TCP: cubic registered |
| [ 0.496349] NET: Registered protocol family 10 |
| [ 0.497205] mip6: Mobile IPv6 |
| [ 0.497688] NET: Registered protocol family 17 |
| [ 0.498386] mpls_gso: MPLS GSO support |
| [ 0.499163] registered taskstats version 1 |
| [ 0.500080] rtc_cmos 00:00: setting system clock to 2016-02-03 18:05:48 UTC (1454522748) |
| [ 0.501374] PM: Hibernation image not present or could not be loaded. |
| [ 0.502395] Freeing unused kernel memory: 1204K (ffffffff818ed000 - ffffffff81a1a000) |
| [ 0.503628] Write protecting the kernel read-only data: 8192k |
| [ 0.506661] Freeing unused kernel memory: 928K (ffff880001518000 - ffff880001600000) |
| [ 0.508439] Freeing unused kernel memory: 216K (ffff8800017ca000 - ffff880001800000) |
| [ 0.516106] systemd-udevd[52]: starting version 215 |
| [ 0.517130] random: systemd-udevd urandom read with 2 bits of entropy available |
| [ 0.524955] e1000: Intel(R) PRO/1000 Network Driver - version 7.3.21-k8-NAPI |
| [ 0.526075] e1000: Copyright (c) 1999-2006 Intel Corporation. |
| [ 0.527252] ACPI: PCI Interrupt Link [GSIG] enabled at IRQ 22 |
| [ 0.868725] e1000 0000:00:02.0 eth0: (PCI:33MHz:32-bit) 80:80:80:80:80:ff |
| [ 0.869861] e1000 0000:00:02.0 eth0: Intel(R) PRO/1000 Network Connection |
| [ 0.876623] FS-Cache: Loaded |
| [ 0.879592] RPC: Registered named UNIX socket transport module. |
| [ 0.880601] RPC: Registered udp transport module. |
| [ 0.881432] RPC: Registered tcp transport module. |
| [ 0.882199] RPC: Registered tcp NFSv4.1 backchannel transport module. |
| [ 0.886329] FS-Cache: Netfs 'nfs' registered for caching |
| [ 0.894290] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready |
| [ 1.436142] tsc: Refined TSC clocksource calibration: 2394.003 MHz |
| [ 2.896535] e1000: eth0 NIC Link is Up 1000 Mbps Full Duplex, Flow Control: RX |
| [ 2.898223] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready |
| [ 3.383578] systemd[1]: systemd 215 running in system mode. (+PAM +AUDIT +SELINUX +IMA +SYSVINIT +LIBCRYPTSETUP +GCRYPT +ACL +XZ -SECCOMP -APPARMOR) |
| [ 3.385694] systemd[1]: Detected virtualization 'kvm'. |
| [ 3.386511] systemd[1]: Detected architecture 'x86-64'. |
| [ 3.592819] systemd[1]: Inserted module 'autofs4' |
| [ 3.595324] systemd[1]: Set hostname to <cb-test-tgt>. |
| [ 3.686952] random: nonblocking pool is initialized |
| [ 4.087781] systemd[1]: Cannot add dependency job for unit dbus.socket, ignoring: Unit dbus.socket failed to load: No such file or directory. |
| [ 4.089818] systemd[1]: Cannot add dependency job for unit display-manager.service, ignoring: Unit display-manager.service failed to load: No such file or directory. |
| [ 4.092378] systemd[1]: Expecting device dev-ttyS0.device... |
| [ 4.094485] systemd[1]: Starting Forward Password Requests to Wall Directory Watch. |
| [ 4.095729] systemd[1]: Started Forward Password Requests to Wall Directory Watch. |
| [ 4.096944] systemd[1]: Starting Remote File Systems (Pre). |
| [ 4.099159] systemd[1]: Reached target Remote File Systems (Pre). |
| [ 4.100171] systemd[1]: Starting Arbitrary Executable File Formats File System Automount Point. |
| [ 4.103189] systemd[1]: Set up automount Arbitrary Executable File Formats File System Automount Point. |
| [ 4.104691] systemd[1]: Starting Encrypted Volumes. |
| [ 4.106725] systemd[1]: Reached target Encrypted Volumes. |
| [ 4.107604] systemd[1]: Starting Dispatch Password Requests to Console Directory Watch. |
| [ 4.108910] systemd[1]: Started Dispatch Password Requests to Console Directory Watch. |
| [ 4.110166] systemd[1]: Starting Paths. |
| [ 4.111882] systemd[1]: Reached target Paths. |
| [ 4.112621] systemd[1]: Starting Swap. |
| [ 4.114313] systemd[1]: Reached target Swap. |
| [ 4.115010] systemd[1]: Starting Root Slice. |
| [ 4.116847] systemd[1]: Created slice Root Slice. |
| [ 4.117616] systemd[1]: Starting User and Session Slice. |
| [ 4.119734] systemd[1]: Created slice User and Session Slice. |
| [ 4.120691] systemd[1]: Starting Delayed Shutdown Socket. |
| [ 4.122871] systemd[1]: Listening on Delayed Shutdown Socket. |
| [ 4.123782] systemd[1]: Starting /dev/initctl Compatibility Named Pipe. |
| [ 4.127026] systemd[1]: Listening on /dev/initctl Compatibility Named Pipe. |
| [ 4.128161] systemd[1]: Starting Journal Socket (/dev/log). |
| [ 4.130994] systemd[1]: Listening on Journal Socket (/dev/log). |
| [ 4.131956] systemd[1]: Starting udev Kernel Socket. |
| [ 4.134039] systemd[1]: Listening on udev Kernel Socket. |
| [ 4.134890] systemd[1]: Starting udev Control Socket. |
| [ 4.136982] systemd[1]: Listening on udev Control Socket. |
| [ 4.137856] systemd[1]: Starting Journal Socket. |
| [ 4.139800] systemd[1]: Listening on Journal Socket. |
| [ 4.140620] systemd[1]: Starting System Slice. |
| [ 4.142530] systemd[1]: Created slice System Slice. |
| [ 4.143314] systemd[1]: Starting system-getty.slice. |
| [ 4.145381] systemd[1]: Created slice system-getty.slice. |
| [ 4.146247] systemd[1]: Starting system-serial\x2dgetty.slice. |
| [ 4.148542] systemd[1]: Created slice system-serial\x2dgetty.slice. |
| [ 4.149570] systemd[1]: Starting Increase datagram queue length... |
| [ 4.160186] systemd[1]: Starting Load Kernel Modules... |
| [ 4.162429] systemd[1]: Mounting Huge Pages File System... |
| [ 4.166757] systemd[1]: Mounting POSIX Message Queue File System... |
| [ 4.379320] systemd[1]: Started Set Up Additional Binary Formats. |
| [ 4.383804] systemd[1]: Starting Create list of required static device nodes for the current kernel... |
| [ 4.402204] systemd[1]: Mounting Debug File System... |
| [ 4.409553] systemd[1]: Starting udev Coldplug all Devices... |
| [ 4.423544] systemd[1]: Starting Slices. |
| [ 4.445020] systemd[1]: Reached target Slices. |
| [ 4.453361] systemd[1]: Starting Remount Root and Kernel File Systems... |
| [ 4.496718] systemd[1]: Started Increase datagram queue length. |
| [ 4.505040] systemd[1]: Started Load Kernel Modules. |
| [ 4.520283] systemd[1]: Mounted POSIX Message Queue File System. |
| [ 4.530153] systemd[1]: Mounted Huge Pages File System. |
| [ 4.540502] systemd[1]: Mounted Debug File System. |
| [ 4.546671] systemd[1]: Started Create list of required static device nodes for the current kernel. |
| [ 4.553912] systemd[1]: Started Remount Root and Kernel File Systems. |
| [ 4.574248] systemd[1]: Started udev Coldplug all Devices. |
| [ 4.605502] systemd[1]: Started Various fixups to make systemd work better on Debian. |
| [ 4.607469] systemd[1]: Starting Load/Save Random Seed... |
| [ 4.610969] systemd[1]: Starting Create Static Device Nodes in /dev... |
| [ 4.615464] systemd[1]: Starting Apply Kernel Variables... |
| [ 4.623174] systemd[1]: Mounted Configuration File System. |
| [ 4.625164] systemd[1]: Mounted FUSE Control File System. |
| [ 4.629073] systemd[1]: Starting Syslog Socket. |
| [ 4.642856] systemd[1]: Listening on Syslog Socket. |
| [ 4.645725] systemd[1]: Starting Sockets. |
| [ 4.652897] systemd[1]: Reached target Sockets. |
| [ 4.654785] systemd[1]: Starting Journal Service... |
| [ 4.666145] systemd[1]: Started Journal Service. |
| [ 4.960817] systemd-udevd[124]: starting version 215 |
| [ 5.216314] systemd-journald[122]: Received request to flush runtime journal from PID 1 |
| [ 5.954335] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input2 |
| [ 5.962427] Floppy drive(s): fd0 is 1.44M |
| [ 5.974298] ACPI: Power Button [PWRF] |
| [ 5.990199] FDC 0 is a S82078B |
| [ 6.037497] parport_pc 00:03: reported by Plug and Play ACPI |
| [ 6.039622] i801_smbus 0000:00:1f.3: enabling device (0100 -> 0101) |
| [ 6.044042] parport0: PC-style at 0x378, irq 7 [PCSPP,TRISTATE] |
| [ 6.073974] SCSI subsystem initialized |
| [ 6.089988] ACPI: PCI Interrupt Link [GSIA] enabled at IRQ 16 |
| [ 6.111225] [drm] Initialized drm 1.1.0 20060810 |
| [ 6.115822] i801_smbus 0000:00:1f.3: Enabling SMBus device |
| [ 6.119825] i801_smbus 0000:00:1f.3: SMBus using PCI Interrupt |
| [ 6.122224] input: PC Speaker as /devices/platform/pcspkr/input/input4 |
| [ 6.188057] libata version 3.00 loaded. |
| [ 6.238877] ahci 0000:00:1f.2: version 3.0 |
| [ 6.239468] ahci 0000:00:1f.2: irq 40 for MSI/MSI-X |
| [ 6.239884] ahci 0000:00:1f.2: AHCI 0001.0000 32 slots 6 ports 1.5 Gbps 0x3f impl SATA mode |
| [ 6.241664] ahci 0000:00:1f.2: flags: ncq only |
| [ 6.263238] scsi0 : ahci |
| [ 6.276970] scsi1 : ahci |
| [ 6.289657] scsi2 : ahci |
| [ 6.305774] scsi3 : ahci |
| [ 6.330362] scsi4 : ahci |
| [ 6.348766] scsi5 : ahci |
| [ 6.350024] ata1: SATA max UDMA/133 abar m4096@0xfe071000 port 0xfe071100 irq 40 |
| [ 6.352401] ata2: SATA max UDMA/133 abar m4096@0xfe071000 port 0xfe071180 irq 40 |
| [ 6.354838] ata3: SATA max UDMA/133 abar m4096@0xfe071000 port 0xfe071200 irq 40 |
| [ 6.357033] ata4: SATA max UDMA/133 abar m4096@0xfe071000 port 0xfe071280 irq 40 |
| [ 6.359266] ata5: SATA max UDMA/133 abar m4096@0xfe071000 port 0xfe071300 irq 40 |
| [ 6.361069] ata6: SATA max UDMA/133 abar m4096@0xfe071000 port 0xfe071380 irq 40 |
| [ 6.388063] iTCO_vendor_support: vendor-support=0 |
| [ 6.389812] ppdev: user-space parallel port driver |
| [ 6.397568] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.11 |
| [ 6.399141] iTCO_wdt: Found a ICH9 TCO device (Version=2, TCOBASE=0x0660) |
| [ 6.400706] iTCO_wdt: timeout value out of range, using 30 |
| [ 6.408463] iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0) |
| [ 6.681267] ata1: SATA link down (SStatus 0 SControl 300) |
| [ 6.697512] ata2: SATA link down (SStatus 0 SControl 300) |
| [ 6.703440] ata3: SATA link down (SStatus 0 SControl 300) |
| [ 6.712224] ata4: SATA link down (SStatus 0 SControl 300) |
| [ 6.727590] ata5: SATA link down (SStatus 0 SControl 300) |
| [ 6.729520] ata6: SATA link down (SStatus 0 SControl 300) |
| [ 6.971860] input: ImExPS/2 Generic Explorer Mouse as /devices/platform/i8042/serio1/input/input3 |
| [ 7.680197] Installing knfsd (copyright (C) 1996 okir@monad.swb.de). |
| [ 38.219146] *****RAPTOR ENGINEERING AUTOMATED TEST BOOT SUCCESS***** |
| [ 195.464137] nfs: server 10.100.1.1 not responding, still trying |
| [ 198.293429] nfs: server 10.100.1.1 OK |