blob: c6141a9aef543f3067e75282c9ac811d9ed65481 [file] [log] [blame]
[ 0.000000] Linux version 4.6.0-1-amd64 (debian-kernel@lists.debian.org) (gcc version 5.4.0 20160609 (Debian 5.4.0-6) ) #1 SMP Debian 4.6.4-1 (2016-07-18)
[ 0.000000] Command line: BOOT_IMAGE=(ahci0,gpt4)/vmlinuz root=/dev/sda4 ro quiet
[ 0.000000] x86/fpu: xstate_offset[2]: 576, xstate_sizes[2]: 256
[ 0.000000] x86/fpu: Supporting XSAVE feature 0x001: 'x87 floating point registers'
[ 0.000000] x86/fpu: Supporting XSAVE feature 0x002: 'SSE registers'
[ 0.000000] x86/fpu: Supporting XSAVE feature 0x004: 'AVX registers'
[ 0.000000] x86/fpu: Enabled xstate features 0x7, context size is 832 bytes, using 'standard' format.
[ 0.000000] x86/fpu: Using 'eager' FPU context switches.
[ 0.000000] e820: BIOS-provided physical RAM map:
[ 0.000000] BIOS-e820: [mem 0x0000000000000000-0x0000000000000fff] type 16
[ 0.000000] BIOS-e820: [mem 0x0000000000001000-0x000000000009ffff] usable
[ 0.000000] BIOS-e820: [mem 0x00000000000a0000-0x00000000000fffff] reserved
[ 0.000000] BIOS-e820: [mem 0x0000000000100000-0x000000001fffffff] usable
[ 0.000000] BIOS-e820: [mem 0x0000000020000000-0x00000000201fffff] reserved
[ 0.000000] BIOS-e820: [mem 0x0000000020200000-0x000000003fffffff] usable
[ 0.000000] BIOS-e820: [mem 0x0000000040000000-0x00000000401fffff] reserved
[ 0.000000] BIOS-e820: [mem 0x0000000040200000-0x00000000bfe9cfff] usable
[ 0.000000] BIOS-e820: [mem 0x00000000bfe9d000-0x00000000bfffffff] type 16
[ 0.000000] BIOS-e820: [mem 0x00000000c0000000-0x00000000c29fffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000f8000000-0x00000000fbffffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fed40000-0x00000000fed44fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fed90000-0x00000000fed91fff] reserved
[ 0.000000] BIOS-e820: [mem 0x0000000100000000-0x000000023c5fffff] usable
[ 0.000000] NX (Execute Disable) protection: active
[ 0.000000] SMBIOS 2.7 present.
[ 0.000000] DMI: LENOVO 4294CTO/4294CTO, BIOS CBET4000 4.4-1609-gddb2465 09/20/2016
[ 0.000000] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
[ 0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable
[ 0.000000] e820: last_pfn = 0x23c600 max_arch_pfn = 0x400000000
[ 0.000000] MTRR default type: write-back
[ 0.000000] MTRR fixed ranges enabled:
[ 0.000000] 00000-9FFFF write-back
[ 0.000000] A0000-BFFFF uncachable
[ 0.000000] C0000-FFFFF write-back
[ 0.000000] MTRR variable ranges enabled:
[ 0.000000] 0 base 0C0000000 mask FE0000000 uncachable
[ 0.000000] 1 base 0E0000000 mask FF0000000 write-combining
[ 0.000000] 2 base 0F0000000 mask FF0000000 uncachable
[ 0.000000] 3 disabled
[ 0.000000] 4 disabled
[ 0.000000] 5 disabled
[ 0.000000] 6 disabled
[ 0.000000] 7 disabled
[ 0.000000] 8 disabled
[ 0.000000] 9 disabled
[ 0.000000] x86/PAT: Configuration [0-7]: WB WC UC- UC WB WC UC- WT
[ 0.000000] e820: last_pfn = 0xbfe9d max_arch_pfn = 0x400000000
[ 0.000000] Base memory trampoline at [ffff880000099000] 99000 size 24576
[ 0.000000] reserving inaccessible SNB gfx pages
[ 0.000000] BRK [0x01d36000, 0x01d36fff] PGTABLE
[ 0.000000] BRK [0x01d37000, 0x01d37fff] PGTABLE
[ 0.000000] BRK [0x01d38000, 0x01d38fff] PGTABLE
[ 0.000000] BRK [0x01d39000, 0x01d39fff] PGTABLE
[ 0.000000] BRK [0x01d3a000, 0x01d3afff] PGTABLE
[ 0.000000] BRK [0x01d3b000, 0x01d3bfff] PGTABLE
[ 0.000000] RAMDISK: [mem 0x35bd1000-0x36ddffff]
[ 0.000000] ACPI: Early table checksum verification disabled
[ 0.000000] ACPI: RSDP 0x00000000000F0000 000024 (v02 CORE )
[ 0.000000] ACPI: XSDT 0x00000000BFEB10E0 00005C (v01 CORE COREBOOT 00000000 CORE 00000000)
[ 0.000000] ACPI: FACP 0x00000000BFEB48B0 0000F4 (v04 CORE COREBOOT 00000000 CORE 00000000)
[ 0.000000] ACPI: DSDT 0x00000000BFEB1280 003627 (v02 COREv4 COREBOOT 20110725 INTL 20160318)
[ 0.000000] ACPI: FACS 0x00000000BFEB1240 000040
[ 0.000000] ACPI: FACS 0x00000000BFEB1240 000040
[ 0.000000] ACPI: SSDT 0x00000000BFEB49B0 001569 (v02 CORE COREBOOT 0000002A CORE 0000002A)
[ 0.000000] ACPI: MCFG 0x00000000BFEB5F20 00003C (v01 CORE COREBOOT 00000000 CORE 00000000)
[ 0.000000] ACPI: TCPA 0x00000000BFEB5F60 000032 (v02 CORE COREBOOT 00000000 CORE 00000000)
[ 0.000000] ACPI: APIC 0x00000000BFEB5FA0 00006C (v01 CORE COREBOOT 00000000 CORE 00000000)
[ 0.000000] ACPI: DMAR 0x00000000BFEB6010 0000A8 (v01 CORE COREBOOT 00000000 CORE 00000000)
[ 0.000000] ACPI: HPET 0x00000000BFEB60C0 000038 (v01 CORE COREBOOT 00000000 CORE 00000000)
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] No NUMA configuration found
[ 0.000000] Faking a node at [mem 0x0000000000000000-0x000000023c5fffff]
[ 0.000000] NODE_DATA(0) allocated [mem 0x23c5f6000-0x23c5fafff]
[ 0.000000] Zone ranges:
[ 0.000000] DMA [mem 0x0000000000001000-0x0000000000ffffff]
[ 0.000000] DMA32 [mem 0x0000000001000000-0x00000000ffffffff]
[ 0.000000] Normal [mem 0x0000000100000000-0x000000023c5fffff]
[ 0.000000] Device empty
[ 0.000000] Movable zone start for each node
[ 0.000000] Early memory node ranges
[ 0.000000] node 0: [mem 0x0000000000001000-0x000000000009ffff]
[ 0.000000] node 0: [mem 0x0000000000100000-0x000000001fffffff]
[ 0.000000] node 0: [mem 0x0000000020200000-0x000000003fffffff]
[ 0.000000] node 0: [mem 0x0000000040200000-0x00000000bfe9cfff]
[ 0.000000] node 0: [mem 0x0000000100000000-0x000000023c5fffff]
[ 0.000000] Initmem setup node 0 [mem 0x0000000000001000-0x000000023c5fffff]
[ 0.000000] On node 0 totalpages: 2080828
[ 0.000000] DMA zone: 64 pages used for memmap
[ 0.000000] DMA zone: 159 pages reserved
[ 0.000000] DMA zone: 3999 pages, LIFO batch:0
[ 0.000000] DMA32 zone: 12203 pages used for memmap
[ 0.000000] DMA32 zone: 780957 pages, LIFO batch:31
[ 0.000000] Normal zone: 20248 pages used for memmap
[ 0.000000] Normal zone: 1295872 pages, LIFO batch:31
[ 0.000000] Reserving Intel graphics stolen memory at 0xc0a00000-0xc29fffff
[ 0.000000] ACPI: PM-Timer IO Port: 0x508
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-23
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[ 0.000000] ACPI: IRQ0 used by override.
[ 0.000000] ACPI: IRQ9 used by override.
[ 0.000000] Using ACPI (MADT) for SMP configuration information
[ 0.000000] ACPI: HPET id: 0x8086a701 base: 0xfed00000
[ 0.000000] smpboot: Allowing 4 CPUs, 0 hotplug CPUs
[ 0.000000] PM: Registered nosave memory: [mem 0x00000000-0x00000fff]
[ 0.000000] PM: Registered nosave memory: [mem 0x000a0000-0x000fffff]
[ 0.000000] PM: Registered nosave memory: [mem 0x20000000-0x201fffff]
[ 0.000000] PM: Registered nosave memory: [mem 0x40000000-0x401fffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xbfe9d000-0xbfffffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xc0000000-0xc29fffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xc2a00000-0xf7ffffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xf8000000-0xfbffffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfc000000-0xfed3ffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfed40000-0xfed44fff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfed45000-0xfed8ffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfed90000-0xfed91fff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfed92000-0xffffffff]
[ 0.000000] e820: [mem 0xc2a00000-0xf7ffffff] available for PCI devices
[ 0.000000] Booting paravirtualized kernel on bare hardware
[ 0.000000] clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645519600211568 ns
[ 0.000000] setup_percpu: NR_CPUS:512 nr_cpumask_bits:512 nr_cpu_ids:4 nr_node_ids:1
[ 0.000000] percpu: Embedded 32 pages/cpu @ffff88023c200000 s93720 r8192 d29160 u524288
[ 0.000000] pcpu-alloc: s93720 r8192 d29160 u524288 alloc=1*2097152
[ 0.000000] pcpu-alloc: [0] 0 1 2 3
[ 0.000000] Built 1 zonelists in Node order, mobility grouping on. Total pages: 2048154
[ 0.000000] Policy zone: Normal
[ 0.000000] Kernel command line: BOOT_IMAGE=(ahci0,gpt4)/vmlinuz root=/dev/sda4 ro quiet
[ 0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes)
[ 0.000000] Calgary: detecting Calgary via BIOS EBDA area
[ 0.000000] Calgary: Unable to locate Rio Grande table in EBDA - bailing!
[ 0.000000] Memory: 8092704K/8323312K available (5932K kernel code, 1090K rwdata, 2700K rodata, 1336K init, 824K bss, 230608K reserved, 0K cma-reserved)
[ 0.000000] Hierarchical RCU implementation.
[ 0.000000] Build-time adjustment of leaf fanout to 64.
[ 0.000000] RCU restricting CPUs from NR_CPUS=512 to nr_cpu_ids=4.
[ 0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=64, nr_cpu_ids=4
[ 0.000000] NR_IRQS:33024 nr_irqs:456 16
[ 0.000000] Console: colour VGA+ 80x25
[ 0.000000] console [tty0] enabled
[ 0.000000] clocksource: hpet: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 133484882848 ns
[ 0.000000] hpet clockevent registered
[ 0.000000] tsc: Fast TSC calibration using PIT
[ 0.000000] tsc: Detected 2494.219 MHz processor
[ 0.000032] Calibrating delay loop (skipped), value calculated using timer frequency.. 4988.43 BogoMIPS (lpj=9976876)
[ 0.000034] pid_max: default: 32768 minimum: 301
[ 0.000045] ACPI: Core revision 20160108
[ 0.002984] ACPI: 2 ACPI AML tables successfully acquired and loaded
[ 0.003021] Security Framework initialized
[ 0.003023] Yama: disabled by default; enable with sysctl kernel.yama.*
[ 0.003030] AppArmor: AppArmor disabled by boot time parameter
[ 0.003533] Dentry cache hash table entries: 1048576 (order: 11, 8388608 bytes)
[ 0.005141] Inode-cache hash table entries: 524288 (order: 10, 4194304 bytes)
[ 0.005837] Mount-cache hash table entries: 16384 (order: 5, 131072 bytes)
[ 0.005847] Mountpoint-cache hash table entries: 16384 (order: 5, 131072 bytes)
[ 0.006185] Disabling memory control group subsystem
[ 0.006213] CPU: Physical Processor ID: 0
[ 0.006214] CPU: Processor Core ID: 0
[ 0.006219] mce: CPU supports 7 MCE banks
[ 0.006231] CPU0: Thermal monitoring enabled (TM1)
[ 0.006237] process: using mwait in idle threads
[ 0.006241] Last level iTLB entries: 4KB 512, 2MB 8, 4MB 8
[ 0.006242] Last level dTLB entries: 4KB 512, 2MB 32, 4MB 32, 1GB 0
[ 0.006626] Freeing SMP alternatives memory: 24K (ffffffff81c60000 - ffffffff81c66000)
[ 0.008611] ftrace: allocating 24381 entries in 96 pages
[ 0.019436] smpboot: Max logical packages: 2
[ 0.019439] smpboot: APIC(0) Converting physical 0 to logical package 0
[ 0.019451] DMAR: Host address width 36
[ 0.019453] DMAR: DRHD base: 0x000000fed90000 flags: 0x0
[ 0.019458] DMAR: dmar0: reg_base_addr fed90000 ver 1:0 cap c0000020e60262 ecap f0101a
[ 0.019459] DMAR: DRHD base: 0x000000fed91000 flags: 0x1
[ 0.019463] DMAR: dmar1: reg_base_addr fed91000 ver 1:0 cap c9008020660262 ecap f0105a
[ 0.019465] DMAR-IR: IOAPIC id 2 under DRHD base 0xfed91000 IOMMU 1
[ 0.019466] DMAR-IR: HPET id 0 under DRHD base 0xfed91000
[ 0.019467] DMAR-IR: Queued invalidation will be enabled to support x2apic and Intr-remapping.
[ 0.019797] DMAR-IR: Enabled IRQ remapping in x2apic mode
[ 0.019800] x2apic enabled
[ 0.019806] Switched APIC routing to cluster x2apic.
[ 0.020265] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[ 0.059955] TSC deadline timer enabled
[ 0.059959] smpboot: CPU0: Intel(R) Core(TM) i5-2520M CPU @ 2.50GHz (family: 0x6, model: 0x2a, stepping: 0x7)
[ 0.059982] Performance Events: PEBS fmt1+, 16-deep LBR, SandyBridge events, full-width counters, Intel PMU driver.
[ 0.060003] ... version: 3
[ 0.060004] ... bit width: 48
[ 0.060004] ... generic registers: 4
[ 0.060005] ... value mask: 0000ffffffffffff
[ 0.060006] ... max period: 0000ffffffffffff
[ 0.060007] ... fixed-purpose events: 3
[ 0.060008] ... event mask: 000000070000000f
[ 0.060541] NMI watchdog: enabled on all CPUs, permanently consumes one hw-PMU counter.
[ 0.060638] x86: Booting SMP configuration:
[ 0.060640] .... node #0, CPUs: #1 #2 #3
[ 0.302116] x86: Booted up 1 node, 4 CPUs
[ 0.302120] smpboot: Total of 4 processors activated (19957.14 BogoMIPS)
[ 0.305465] devtmpfs: initialized
[ 0.305532] x86/mm: Memory block size: 128MB
[ 0.308240] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns
[ 0.308307] pinctrl core: initialized pinctrl subsystem
[ 0.308452] NET: Registered protocol family 16
[ 0.317149] cpuidle: using governor ladder
[ 0.326094] cpuidle: using governor menu
[ 0.326231] ACPI: bus type PCI registered
[ 0.326233] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
[ 0.326317] PCI: MMCONFIG for domain 0000 [bus 00-3f] at [mem 0xf8000000-0xfbffffff] (base 0xf8000000)
[ 0.326319] PCI: MMCONFIG at [mem 0xf8000000-0xfbffffff] reserved in E820
[ 0.326329] PCI: Using configuration type 1 for base access
[ 0.326351] core: PMU erratum BJ122, BV98, HSD29 worked around, HT is on
[ 0.334311] HugeTLB registered 2 MB page size, pre-allocated 0 pages
[ 0.334564] ACPI: Added _OSI(Module Device)
[ 0.334565] ACPI: Added _OSI(Processor Device)
[ 0.334566] ACPI: Added _OSI(3.0 _SCP Extensions)
[ 0.334568] ACPI: Added _OSI(Processor Aggregator Device)
[ 0.334786] ACPI: Executed 1 blocks of module-level executable AML code
[ 0.336672] ACPI : EC: EC started
[ 0.336717] ACPI: Interpreter enabled
[ 0.336733] ACPI: (supports S0 S3 S4 S5)
[ 0.336734] ACPI: Using IOAPIC for interrupt routing
[ 0.336755] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
[ 0.341104] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
[ 0.341109] acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI]
[ 0.341161] acpi PNP0A08:00: _OSC: OS now controls [PCIeHotplug PME AER PCIeCapability]
[ 0.341170] acpi PNP0A08:00: [Firmware Info]: MMCONFIG for domain 0000 [bus 00-3f] only partially covers this bridge
[ 0.341365] PCI host bridge to bus 0000:00
[ 0.341368] pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7 window]
[ 0.341370] pci_bus 0000:00: root bus resource [io 0x0d00-0xffff window]
[ 0.341372] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff window]
[ 0.341373] pci_bus 0000:00: root bus resource [mem 0x000c0000-0x000c3fff window]
[ 0.341375] pci_bus 0000:00: root bus resource [mem 0x000c4000-0x000c7fff window]
[ 0.341376] pci_bus 0000:00: root bus resource [mem 0x000c8000-0x000cbfff window]
[ 0.341378] pci_bus 0000:00: root bus resource [mem 0x000cc000-0x000cffff window]
[ 0.341379] pci_bus 0000:00: root bus resource [mem 0x000d0000-0x000d3fff window]
[ 0.341381] pci_bus 0000:00: root bus resource [mem 0x000d4000-0x000d7fff window]
[ 0.341382] pci_bus 0000:00: root bus resource [mem 0x000d8000-0x000dbfff window]
[ 0.341383] pci_bus 0000:00: root bus resource [mem 0x000dc000-0x000dffff window]
[ 0.341385] pci_bus 0000:00: root bus resource [mem 0x000e0000-0x000e3fff window]
[ 0.341386] pci_bus 0000:00: root bus resource [mem 0x000e4000-0x000e7fff window]
[ 0.341388] pci_bus 0000:00: root bus resource [mem 0x000e8000-0x000ebfff window]
[ 0.341389] pci_bus 0000:00: root bus resource [mem 0x000ec000-0x000effff window]
[ 0.341391] pci_bus 0000:00: root bus resource [mem 0x000f0000-0x000fffff window]
[ 0.341392] pci_bus 0000:00: root bus resource [mem 0xc2a00000-0xf7ffffff window]
[ 0.341394] pci_bus 0000:00: root bus resource [mem 0xfed40000-0xfed44fff window]
[ 0.341396] pci_bus 0000:00: root bus resource [bus 00-ff]
[ 0.341403] pci 0000:00:00.0: [8086:0104] type 00 class 0x060000
[ 0.341492] pci 0000:00:02.0: [8086:0126] type 00 class 0x030000
[ 0.341501] pci 0000:00:02.0: reg 0x10: [mem 0xf1000000-0xf13fffff 64bit]
[ 0.341506] pci 0000:00:02.0: reg 0x18: [mem 0xe0000000-0xefffffff 64bit pref]
[ 0.341510] pci 0000:00:02.0: reg 0x20: [io 0x3000-0x303f]
[ 0.341586] pci 0000:00:04.0: [8086:0103] type 00 class 0x118000
[ 0.341595] pci 0000:00:04.0: reg 0x10: [mem 0xf1620000-0xf1627fff 64bit]
[ 0.341697] pci 0000:00:19.0: [8086:1502] type 00 class 0x020000
[ 0.341712] pci 0000:00:19.0: reg 0x10: [mem 0xf1600000-0xf161ffff]
[ 0.341721] pci 0000:00:19.0: reg 0x14: [mem 0xf162c000-0xf162cfff]
[ 0.341730] pci 0000:00:19.0: reg 0x18: [io 0x3040-0x305f]
[ 0.341789] pci 0000:00:19.0: PME# supported from D0 D3hot D3cold
[ 0.341860] pci 0000:00:1a.0: [8086:1c2d] type 00 class 0x0c0320
[ 0.341878] pci 0000:00:1a.0: reg 0x10: [mem 0xf162e000-0xf162e3ff]
[ 0.341962] pci 0000:00:1a.0: PME# supported from D0 D3hot D3cold
[ 0.341999] pci 0000:00:1a.0: System wakeup disabled by ACPI
[ 0.342043] pci 0000:00:1b.0: [8086:1c20] type 00 class 0x040300
[ 0.342061] pci 0000:00:1b.0: reg 0x10: [mem 0xf1628000-0xf162bfff 64bit]
[ 0.342134] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
[ 0.342173] pci 0000:00:1b.0: System wakeup disabled by ACPI
[ 0.342219] pci 0000:00:1c.0: [8086:1c10] type 01 class 0x060400
[ 0.342333] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
[ 0.342422] pci 0000:00:1c.1: [8086:1c12] type 01 class 0x060400
[ 0.342546] pci 0000:00:1c.1: PME# supported from D0 D3hot D3cold
[ 0.342635] pci 0000:00:1c.3: [8086:1c16] type 01 class 0x060400
[ 0.342760] pci 0000:00:1c.3: PME# supported from D0 D3hot D3cold
[ 0.342847] pci 0000:00:1c.4: [8086:1c18] type 01 class 0x060400
[ 0.342972] pci 0000:00:1c.4: PME# supported from D0 D3hot D3cold
[ 0.343060] pci 0000:00:1c.5: [8086:1c1c] type 01 class 0x060400
[ 0.343172] pci 0000:00:1c.5: PME# supported from D0 D3hot D3cold
[ 0.343259] pci 0000:00:1d.0: [8086:1c26] type 00 class 0x0c0320
[ 0.343277] pci 0000:00:1d.0: reg 0x10: [mem 0xf162f000-0xf162f3ff]
[ 0.343360] pci 0000:00:1d.0: PME# supported from D0 D3hot D3cold
[ 0.343396] pci 0000:00:1d.0: System wakeup disabled by ACPI
[ 0.343437] pci 0000:00:1f.0: [8086:1c4f] type 00 class 0x060100
[ 0.343601] pci 0000:00:1f.2: [8086:1c03] type 00 class 0x010601
[ 0.343618] pci 0000:00:1f.2: reg 0x10: [io 0x3080-0x3087]
[ 0.343627] pci 0000:00:1f.2: reg 0x14: [io 0x3090-0x3093]
[ 0.343636] pci 0000:00:1f.2: reg 0x18: [io 0x3088-0x308f]
[ 0.343645] pci 0000:00:1f.2: reg 0x1c: [io 0x3094-0x3097]
[ 0.343653] pci 0000:00:1f.2: reg 0x20: [io 0x3060-0x307f]
[ 0.343662] pci 0000:00:1f.2: reg 0x24: [mem 0xf162d000-0xf162d7ff]
[ 0.343707] pci 0000:00:1f.2: PME# supported from D3hot
[ 0.343776] pci 0000:00:1f.3: [8086:1c22] type 00 class 0x0c0500
[ 0.343792] pci 0000:00:1f.3: reg 0x10: [mem 0xf1630000-0xf16300ff 64bit]
[ 0.343813] pci 0000:00:1f.3: reg 0x20: [io 0x0400-0x041f]
[ 0.343954] pci 0000:00:1c.0: PCI bridge to [bus 01]
[ 0.344172] pci 0000:02:00.0: [8086:088e] type 00 class 0x028000
[ 0.344340] pci 0000:02:00.0: reg 0x10: [mem 0xf1400000-0xf1401fff 64bit]
[ 0.345116] pci 0000:02:00.0: PME# supported from D0 D3hot D3cold
[ 0.353331] pci 0000:00:1c.1: PCI bridge to [bus 02]
[ 0.353340] pci 0000:00:1c.1: bridge window [mem 0xf1400000-0xf14fffff]
[ 0.353430] pci 0000:00:1c.3: PCI bridge to [bus 03]
[ 0.353435] pci 0000:00:1c.3: bridge window [io 0x2000-0x2fff]
[ 0.353440] pci 0000:00:1c.3: bridge window [mem 0xf0800000-0xf0ffffff]
[ 0.353449] pci 0000:00:1c.3: bridge window [mem 0xf0000000-0xf07fffff 64bit pref]
[ 0.353547] pci 0000:04:00.0: [1180:e823] type 00 class 0x080501
[ 0.353581] pci 0000:04:00.0: MMC controller base frequency changed to 50Mhz.
[ 0.353619] pci 0000:04:00.0: reg 0x10: [mem 0xf1500000-0xf15000ff]
[ 0.353921] pci 0000:04:00.0: supports D1 D2
[ 0.353923] pci 0000:04:00.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.361219] pci 0000:00:1c.4: PCI bridge to [bus 04]
[ 0.361235] pci 0000:00:1c.4: bridge window [mem 0xf1500000-0xf15fffff]
[ 0.361338] pci 0000:00:1c.5: PCI bridge to [bus 05]
[ 0.361485] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 10 12 14 15) *11
[ 0.361534] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 *11 12 14 15)
[ 0.361580] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 7 10 12 14 15) *11
[ 0.361625] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 *11 12 14 15)
[ 0.361670] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 10 12 14 15) *11
[ 0.361715] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 *11 12 14 15)
[ 0.361759] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 7 10 12 14 15) *11
[ 0.361805] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 7 *11 12 14 15)
[ 0.362488] ACPI: Enabled 1 GPEs in block 00 to 3F
[ 0.362538] ACPI : EC: GPE = 0x11, I/O: command/status = 0x66, data = 0x62
[ 0.362625] vgaarb: setting as boot device: PCI:0000:00:02.0
[ 0.362627] vgaarb: device added: PCI:0000:00:02.0,decodes=io+mem,owns=io+mem,locks=none
[ 0.362630] vgaarb: loaded
[ 0.362631] vgaarb: bridge control possible 0000:00:02.0
[ 0.362723] PCI: Using ACPI for IRQ routing
[ 0.364183] PCI: pci_cache_line_size set to 64 bytes
[ 0.364298] e820: reserve RAM buffer [mem 0xbfe9d000-0xbfffffff]
[ 0.364300] e820: reserve RAM buffer [mem 0x23c600000-0x23fffffff]
[ 0.364470] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0, 0, 0, 0, 0
[ 0.364476] hpet0: 8 comparators, 64-bit 14.318180 MHz counter
[ 0.366500] clocksource: Switched to clocksource hpet
[ 0.372330] VFS: Disk quotas dquot_6.6.0
[ 0.372358] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[ 0.372499] pnp: PnP ACPI init
[ 0.372598] system 00:00: [mem 0xfed1c000-0xfed1ffff] has been reserved
[ 0.372601] system 00:00: [mem 0xfed10000-0xfed17fff] has been reserved
[ 0.372602] system 00:00: [mem 0xfed18000-0xfed18fff] has been reserved
[ 0.372604] system 00:00: [mem 0xfed19000-0xfed19fff] has been reserved
[ 0.372606] system 00:00: [mem 0xf8000000-0xfbffffff] has been reserved
[ 0.372607] system 00:00: [mem 0xfed20000-0xfed3ffff] has been reserved
[ 0.372609] system 00:00: [mem 0xfed40000-0xfed44fff] has been reserved
[ 0.372611] system 00:00: [mem 0xfed45000-0xfed8ffff] has been reserved
[ 0.372613] system 00:00: [mem 0x20000000-0x201fffff] has been reserved
[ 0.372614] system 00:00: [mem 0x40000000-0x401fffff] has been reserved
[ 0.372618] system 00:00: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.373148] system 00:01: [mem 0xfed00000-0xfed003ff] has been reserved
[ 0.373151] system 00:01: Plug and Play ACPI device, IDs PNP0103 PNP0c01 (active)
[ 0.373193] system 00:02: [io 0x0500-0x057f] could not be reserved
[ 0.373195] system 00:02: [io 0x0480-0x04bf] has been reserved
[ 0.373197] system 00:02: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.373220] pnp 00:03: Plug and Play ACPI device, IDs PNP0b00 (active)
[ 0.373254] pnp 00:04: Plug and Play ACPI device, IDs PNP0303 PNP030b (active)
[ 0.373281] pnp 00:05: Plug and Play ACPI device, IDs PNP0f13 (active)
[ 0.373376] pnp 00:06: Plug and Play ACPI device, IDs PNP0c31 (active)
[ 0.373393] pnp: PnP ACPI: found 7 devices
[ 0.379971] clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns
[ 0.380037] pci 0000:00:1c.0: PCI bridge to [bus 01]
[ 0.380056] pci 0000:00:1c.1: PCI bridge to [bus 02]
[ 0.380063] pci 0000:00:1c.1: bridge window [mem 0xf1400000-0xf14fffff]
[ 0.380075] pci 0000:00:1c.3: PCI bridge to [bus 03]
[ 0.380078] pci 0000:00:1c.3: bridge window [io 0x2000-0x2fff]
[ 0.380085] pci 0000:00:1c.3: bridge window [mem 0xf0800000-0xf0ffffff]
[ 0.380090] pci 0000:00:1c.3: bridge window [mem 0xf0000000-0xf07fffff 64bit pref]
[ 0.380098] pci 0000:00:1c.4: PCI bridge to [bus 04]
[ 0.380105] pci 0000:00:1c.4: bridge window [mem 0xf1500000-0xf15fffff]
[ 0.380117] pci 0000:00:1c.5: PCI bridge to [bus 05]
[ 0.380135] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7 window]
[ 0.380137] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff window]
[ 0.380138] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff window]
[ 0.380140] pci_bus 0000:00: resource 7 [mem 0x000c0000-0x000c3fff window]
[ 0.380141] pci_bus 0000:00: resource 8 [mem 0x000c4000-0x000c7fff window]
[ 0.380143] pci_bus 0000:00: resource 9 [mem 0x000c8000-0x000cbfff window]
[ 0.380144] pci_bus 0000:00: resource 10 [mem 0x000cc000-0x000cffff window]
[ 0.380146] pci_bus 0000:00: resource 11 [mem 0x000d0000-0x000d3fff window]
[ 0.380147] pci_bus 0000:00: resource 12 [mem 0x000d4000-0x000d7fff window]
[ 0.380149] pci_bus 0000:00: resource 13 [mem 0x000d8000-0x000dbfff window]
[ 0.380150] pci_bus 0000:00: resource 14 [mem 0x000dc000-0x000dffff window]
[ 0.380151] pci_bus 0000:00: resource 15 [mem 0x000e0000-0x000e3fff window]
[ 0.380153] pci_bus 0000:00: resource 16 [mem 0x000e4000-0x000e7fff window]
[ 0.380154] pci_bus 0000:00: resource 17 [mem 0x000e8000-0x000ebfff window]
[ 0.380156] pci_bus 0000:00: resource 18 [mem 0x000ec000-0x000effff window]
[ 0.380157] pci_bus 0000:00: resource 19 [mem 0x000f0000-0x000fffff window]
[ 0.380159] pci_bus 0000:00: resource 20 [mem 0xc2a00000-0xf7ffffff window]
[ 0.380160] pci_bus 0000:00: resource 21 [mem 0xfed40000-0xfed44fff window]
[ 0.380162] pci_bus 0000:02: resource 1 [mem 0xf1400000-0xf14fffff]
[ 0.380164] pci_bus 0000:03: resource 0 [io 0x2000-0x2fff]
[ 0.380165] pci_bus 0000:03: resource 1 [mem 0xf0800000-0xf0ffffff]
[ 0.380167] pci_bus 0000:03: resource 2 [mem 0xf0000000-0xf07fffff 64bit pref]
[ 0.380168] pci_bus 0000:04: resource 1 [mem 0xf1500000-0xf15fffff]
[ 0.380225] NET: Registered protocol family 2
[ 0.380401] TCP established hash table entries: 65536 (order: 7, 524288 bytes)
[ 0.380535] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
[ 0.380662] TCP: Hash tables configured (established 65536 bind 65536)
[ 0.380689] UDP hash table entries: 4096 (order: 5, 131072 bytes)
[ 0.380717] UDP-Lite hash table entries: 4096 (order: 5, 131072 bytes)
[ 0.380805] NET: Registered protocol family 1
[ 0.380823] pci 0000:00:02.0: Video device with shadowed ROM at [mem 0x000c0000-0x000dffff]
[ 0.381253] PCI: CLS 64 bytes, default 64
[ 0.381305] Unpacking initramfs...
[ 0.707219] Freeing initrd memory: 18492K (ffff880035bd1000 - ffff880036de0000)
[ 0.707271] PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
[ 0.707273] software IO TLB [mem 0xbbe9d000-0xbfe9d000] (64MB) mapped at [ffff8800bbe9d000-ffff8800bfe9cfff]
[ 0.707325] RAPL PMU: API unit is 2^-32 Joules, 3 fixed counters, 163840 ms ovfl timer
[ 0.707326] RAPL PMU: hw unit of domain pp0-core 2^-16 Joules
[ 0.707327] RAPL PMU: hw unit of domain package 2^-16 Joules
[ 0.707328] RAPL PMU: hw unit of domain pp1-gpu 2^-16 Joules
[ 0.707712] futex hash table entries: 1024 (order: 4, 65536 bytes)
[ 0.707746] audit: initializing netlink subsys (disabled)
[ 0.707763] audit: type=2000 audit(1474399533.708:1): initialized
[ 0.708195] Initialise system trusted keyring
[ 0.708297] workingset: timestamp_bits=37 max_order=21 bucket_order=0
[ 0.708317] zbud: loaded
[ 0.755551] Key type asymmetric registered
[ 0.755554] Asymmetric key parser 'x509' registered
[ 0.755578] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 251)
[ 0.755607] io scheduler noop registered
[ 0.755609] io scheduler deadline registered
[ 0.755622] io scheduler cfq registered (default)
[ 0.756522] pcieport 0000:00:1c.0: Signaling PME through PCIe PME interrupt
[ 0.756528] pcie_pme 0000:00:1c.0:pcie01: service driver pcie_pme loaded
[ 0.756555] pcieport 0000:00:1c.1: Signaling PME through PCIe PME interrupt
[ 0.756556] pci 0000:02:00.0: Signaling PME through PCIe PME interrupt
[ 0.756562] pcie_pme 0000:00:1c.1:pcie01: service driver pcie_pme loaded
[ 0.756588] pcieport 0000:00:1c.3: Signaling PME through PCIe PME interrupt
[ 0.756593] pcie_pme 0000:00:1c.3:pcie01: service driver pcie_pme loaded
[ 0.756621] pcieport 0000:00:1c.4: Signaling PME through PCIe PME interrupt
[ 0.756622] pci 0000:04:00.0: Signaling PME through PCIe PME interrupt
[ 0.756627] pcie_pme 0000:00:1c.4:pcie01: service driver pcie_pme loaded
[ 0.756653] pcieport 0000:00:1c.5: Signaling PME through PCIe PME interrupt
[ 0.756658] pcie_pme 0000:00:1c.5:pcie01: service driver pcie_pme loaded
[ 0.756665] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[ 0.756680] pciehp 0000:00:1c.3:pcie04: Slot #0 AttnBtn- PwrCtrl- MRL- AttnInd- PwrInd- HotPlug+ Surprise+ Interlock- NoCompl+ LLActRep+
[ 0.756712] pciehp 0000:00:1c.3:pcie04: service driver pciehp loaded
[ 0.756717] pciehp: PCI Express Hot Plug Controller Driver version: 0.4
[ 0.756738] intel_idle: MWAIT substates: 0x21120
[ 0.756740] intel_idle: v0.4.1 model 0x2A
[ 0.756891] intel_idle: lapic_timer_reliable_states 0xffffffff
[ 0.756914] GHES: HEST is not enabled!
[ 0.756979] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
[ 0.757363] Linux agpgart interface v0.103
[ 0.757414] AMD IOMMUv2 driver by Joerg Roedel <jroedel@suse.de>
[ 0.757415] AMD IOMMUv2 functionality not available on this system
[ 0.757762] i8042: PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at 0x60,0x64 irq 1,12
[ 0.762231] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 0.762235] serio: i8042 AUX port at 0x60,0x64 irq 12
[ 0.762357] mousedev: PS/2 mouse device common for all mice
[ 0.762398] rtc_cmos 00:03: RTC can wake from S4
[ 0.762542] rtc_cmos 00:03: rtc core: registered rtc_cmos as rtc0
[ 0.762573] rtc_cmos 00:03: alarms up to one month, 242 bytes nvram, hpet irqs
[ 0.762585] Intel P-state driver initializing.
[ 0.766402] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input0
[ 0.814730] ledtrig-cpu: registered to indicate activity on CPUs
[ 0.815464] NET: Registered protocol family 10
[ 0.816093] mip6: Mobile IPv6
[ 0.816106] NET: Registered protocol family 17
[ 0.816121] mpls_gso: MPLS GSO support
[ 0.816758] microcode: CPU0 sig=0x206a7, pf=0x10, revision=0x29
[ 0.816793] microcode: CPU1 sig=0x206a7, pf=0x10, revision=0x29
[ 0.816817] microcode: CPU2 sig=0x206a7, pf=0x10, revision=0x29
[ 0.816840] microcode: CPU3 sig=0x206a7, pf=0x10, revision=0x29
[ 0.816959] microcode: Microcode Update Driver: v2.01 <tigran@aivazian.fsnet.co.uk>, Peter Oruba
[ 0.817408] registered taskstats version 1
[ 0.817471] Loading compiled-in X.509 certificates
[ 0.821312] alg: No test for pkcs1pad(rsa,sha256) (pkcs1pad(rsa-generic,sha256))
[ 0.822214] Loaded X.509 cert 'Debian Project: Ben Hutchings: 008a018dca80932630'
[ 0.822298] zswap: loaded using pool lzo/zbud
[ 0.823371] rtc_cmos 00:03: setting system clock to 2016-09-20 19:25:34 UTC (1474399534)
[ 0.823573] PM: Hibernation image not present or could not be loaded.
[ 0.827206] Freeing unused kernel memory: 1336K (ffffffff81b12000 - ffffffff81c60000)
[ 0.827211] Write protecting the kernel read-only data: 10240k
[ 0.827751] Freeing unused kernel memory: 196K (ffff8800015cf000 - ffff880001600000)
[ 0.836182] Freeing unused kernel memory: 1396K (ffff8800018a3000 - ffff880001a00000)
[ 0.854793] x86/mm: Checked W+X mappings: passed, no W+X pages found.
[ 0.971362] random: systemd-udevd urandom read with 1 bits of entropy available
[ 1.020073] fjes: module verification failed: signature and/or required key missing - tainting kernel
[ 1.020368] FUJITSU Extended Socket Network Device Driver - version 1.0 - Copyright (c) 2015 FUJITSU LIMITED
[ 1.043062] thermal LNXTHERM:00: registered as thermal_zone0
[ 1.043066] ACPI: Thermal Zone [THM0] (59 C)
[ 1.043950] thermal LNXTHERM:01: registered as thermal_zone1
[ 1.043954] ACPI: Thermal Zone [THM1] (27 C)
[ 1.047078] ACPI: bus type USB registered
[ 1.047116] usbcore: registered new interface driver usbfs
[ 1.047132] usbcore: registered new interface driver hub
[ 1.047159] usbcore: registered new device driver usb
[ 1.047675] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 1.047900] ehci-pci: EHCI PCI platform driver
[ 1.048087] ehci-pci 0000:00:1a.0: EHCI Host Controller
[ 1.048097] ehci-pci 0000:00:1a.0: new USB bus registered, assigned bus number 1
[ 1.048112] ehci-pci 0000:00:1a.0: debug port 2
[ 1.049937] SCSI subsystem initialized
[ 1.052020] ehci-pci 0000:00:1a.0: cache line size of 64 is not supported
[ 1.052572] ehci-pci 0000:00:1a.0: irq 21, io mem 0xf162e000
[ 1.052650] libata version 3.00 loaded.
[ 1.054092] pps_core: LinuxPPS API ver. 1 registered
[ 1.054095] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it>
[ 1.054360] PTP clock support registered
[ 1.055427] e1000e: Intel(R) PRO/1000 Network Driver - 3.2.6-k
[ 1.055430] e1000e: Copyright(c) 1999 - 2015 Intel Corporation.
[ 1.057200] sdhci: Secure Digital Host Controller Interface driver
[ 1.057204] sdhci: Copyright(c) Pierre Ossman
[ 1.057535] sdhci-pci 0000:04:00.0: SDHCI controller found [1180:e823] (rev 4)
[ 1.059885] mmc0: SDHCI controller on PCI [0000:04:00.0] using DMA
[ 1.062575] ehci-pci 0000:00:1a.0: USB 2.0 started, EHCI 1.00
[ 1.062660] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
[ 1.062664] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.062667] usb usb1: Product: EHCI Host Controller
[ 1.062669] usb usb1: Manufacturer: Linux 4.6.0-1-amd64 ehci_hcd
[ 1.062671] usb usb1: SerialNumber: 0000:00:1a.0
[ 1.062865] hub 1-0:1.0: USB hub found
[ 1.062877] hub 1-0:1.0: 3 ports detected
[ 1.063237] ehci-pci 0000:00:1d.0: EHCI Host Controller
[ 1.063247] ehci-pci 0000:00:1d.0: new USB bus registered, assigned bus number 2
[ 1.063262] ehci-pci 0000:00:1d.0: debug port 2
[ 1.067188] ehci-pci 0000:00:1d.0: cache line size of 64 is not supported
[ 1.067333] ehci-pci 0000:00:1d.0: irq 19, io mem 0xf162f000
[ 1.072331] AVX version of gcm_enc/dec engaged.
[ 1.072334] AES CTR mode by8 optimization enabled
[ 1.078564] ehci-pci 0000:00:1d.0: USB 2.0 started, EHCI 1.00
[ 1.078662] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002
[ 1.078665] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.078667] usb usb2: Product: EHCI Host Controller
[ 1.078669] usb usb2: Manufacturer: Linux 4.6.0-1-amd64 ehci_hcd
[ 1.078671] usb usb2: SerialNumber: 0000:00:1d.0
[ 1.078847] hub 2-0:1.0: USB hub found
[ 1.078857] hub 2-0:1.0: 3 ports detected
[ 1.079096] ahci 0000:00:1f.2: version 3.0
[ 1.079305] ahci 0000:00:1f.2: SSS flag set, parallel bus scan disabled
[ 1.089408] ahci 0000:00:1f.2: AHCI 0001.0300 32 slots 6 ports 6 Gbps 0x7 impl SATA mode
[ 1.089414] ahci 0000:00:1f.2: flags: 64bit ncq sntf ilck stag pm led clo pio slum part apst
[ 1.091004] scsi host0: ahci
[ 1.093049] scsi host1: ahci
[ 1.093190] scsi host2: ahci
[ 1.093292] scsi host3: ahci
[ 1.093394] scsi host4: ahci
[ 1.096576] scsi host5: ahci
[ 1.096673] ata1: SATA max UDMA/133 abar m2048@0xf162d000 port 0xf162d100 irq 31
[ 1.096677] ata2: SATA max UDMA/133 abar m2048@0xf162d000 port 0xf162d180 irq 31
[ 1.096681] ata3: SATA max UDMA/133 abar m2048@0xf162d000 port 0xf162d200 irq 31
[ 1.096683] ata4: DUMMY
[ 1.096685] ata5: DUMMY
[ 1.096686] ata6: DUMMY
[ 1.097023] e1000e 0000:00:19.0: Interrupt Throttling Rate (ints/sec) set to dynamic conservative mode
[ 1.346539] e1000e 0000:00:19.0 eth0: registered PHC clock
[ 1.346559] e1000e 0000:00:19.0 eth0: (PCI Express:2.5GT/s:Width x1) f0:de:f1:c9:0a:e5
[ 1.346561] e1000e 0000:00:19.0 eth0: Intel(R) PRO/1000 Network Connection
[ 1.346622] e1000e 0000:00:19.0 eth0: MAC: 10, PHY: 11, PBA No: 1000FF-0FF
[ 1.347999] e1000e 0000:00:19.0 enp0s25: renamed from eth0
[ 1.374659] usb 1-1: new high-speed USB device number 2 using ehci-pci
[ 1.390661] usb 2-1: new high-speed USB device number 2 using ehci-pci
[ 1.407619] ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
[ 1.409844] ata1.00: supports DRM functions and may not be fully accessible
[ 1.410184] ata1.00: disabling queued TRIM support
[ 1.410192] ata1.00: ATA-9: Samsung SSD 840 EVO 120GB, EXT0DB6Q, max UDMA/133
[ 1.410197] ata1.00: 234441648 sectors, multi 1: LBA48 NCQ (depth 31/32), AA
[ 1.410695] ata1.00: supports DRM functions and may not be fully accessible
[ 1.410840] ata1.00: disabling queued TRIM support
[ 1.410850] ata1.00: configured for UDMA/133
[ 1.411495] scsi 0:0:0:0: Direct-Access ATA Samsung SSD 840 DB6Q PQ: 0 ANSI: 5
[ 1.507361] usb 1-1: New USB device found, idVendor=8087, idProduct=0024
[ 1.507370] usb 1-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[ 1.508057] hub 1-1:1.0: USB hub found
[ 1.508168] hub 1-1:1.0: 6 ports detected
[ 1.523391] usb 2-1: New USB device found, idVendor=8087, idProduct=0024
[ 1.523401] usb 2-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[ 1.524032] hub 2-1:1.0: USB hub found
[ 1.524149] hub 2-1:1.0: 8 ports detected
[ 1.706650] tsc: Refined TSC clocksource calibration: 2494.337 MHz
[ 1.706662] clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x23f4544ecb4, max_idle_ns: 440795257849 ns
[ 1.750360] ata2: SATA link down (SStatus 0 SControl 300)
[ 1.778674] usb 1-1.3: new full-speed USB device number 3 using ehci-pci
[ 1.798631] usb 2-1.3: new full-speed USB device number 3 using ehci-pci
[ 1.872497] usb 1-1.3: New USB device found, idVendor=147e, idProduct=2016
[ 1.872507] usb 1-1.3: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[ 1.872511] usb 1-1.3: Product: Biometric Coprocessor
[ 1.872515] usb 1-1.3: Manufacturer: UPEK
[ 1.895939] usb 2-1.3: New USB device found, idVendor=8087, idProduct=07da
[ 1.895950] usb 2-1.3: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[ 1.942682] usb 1-1.6: new high-speed USB device number 4 using ehci-pci
[ 1.966661] usb 2-1.4: new high-speed USB device number 4 using ehci-pci
[ 2.025151] psmouse serio1: synaptics: queried max coordinates: x [..5472], y [..4448]
[ 2.041609] usb 1-1.6: New USB device found, idVendor=04f2, idProduct=b217
[ 2.041619] usb 1-1.6: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[ 2.041624] usb 1-1.6: Product: Integrated Camera
[ 2.041628] usb 1-1.6: Manufacturer: Chicony Electronics Co., Ltd.
[ 2.062191] ata3: SATA link down (SStatus 0 SControl 300)
[ 2.068177] usb 2-1.4: New USB device found, idVendor=0bdb, idProduct=190d
[ 2.068189] usb 2-1.4: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[ 2.068195] usb 2-1.4: Product: F5521gw
[ 2.068201] usb 2-1.4: Manufacturer: Ericsson
[ 2.068206] usb 2-1.4: SerialNumber: 1B6D288CB004B6B0
[ 2.080322] sd 0:0:0:0: [sda] 234441648 512-byte logical blocks: (120 GB/112 GiB)
[ 2.080481] sd 0:0:0:0: [sda] Write Protect is off
[ 2.080490] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 2.080538] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 2.084852] sda: sda1 sda2 sda3 sda4 sda5
[ 2.085918] sd 0:0:0:0: [sda] Attached SCSI disk
[ 2.117135] psmouse serio1: synaptics: Touchpad model: 1, fw: 8.0, id: 0x1e2b1, caps: 0xd001a3/0x940300/0x120c00/0x0, board id: 1611, fw id: 774180
[ 2.117154] psmouse serio1: synaptics: serio: Synaptics pass-through port at isa0060/serio1/input0
[ 2.176113] input: SynPS/2 Synaptics TouchPad as /devices/platform/i8042/serio1/input/input2
[ 2.178603] usb 2-1.5: new full-speed USB device number 5 using ehci-pci
[ 2.218598] raid6: sse2x1 gen() 5942 MB/s
[ 2.285226] usb 2-1.5: New USB device found, idVendor=056a, idProduct=00e6
[ 2.285229] usb 2-1.5: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[ 2.285231] usb 2-1.5: Product: ISD-V4
[ 2.285233] usb 2-1.5: Manufacturer: Tablet
[ 2.286599] raid6: sse2x1 xor() 5650 MB/s
[ 2.288326] hidraw: raw HID events driver (C) Jiri Kosina
[ 2.298923] usbcore: registered new interface driver usbhid
[ 2.298926] usbhid: USB HID core driver
[ 2.300579] input: Wacom ISDv4 E6 Pen as /devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.5/2-1.5:1.0/0003:056A:00E6.0001/input/input4
[ 2.300762] wacom 0003:056A:00E6.0001: hidraw0: USB HID v1.11 Device [Tablet ISD-V4] on usb-0000:00:1d.0-1.5/input0
[ 2.301036] input: Wacom ISDv4 E6 Finger as /devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.5/2-1.5:1.1/0003:056A:00E6.0002/input/input8
[ 2.301113] wacom 0003:056A:00E6.0002: hidraw1: USB HID v1.11 Mouse [Tablet ISD-V4] on usb-0000:00:1d.0-1.5/input1
[ 2.354607] raid6: sse2x2 gen() 9881 MB/s
[ 2.422606] raid6: sse2x2 xor() 7532 MB/s
[ 2.490611] raid6: sse2x4 gen() 12149 MB/s
[ 2.558610] raid6: sse2x4 xor() 8941 MB/s
[ 2.558612] raid6: using algorithm sse2x4 gen() 12149 MB/s
[ 2.558612] raid6: .... xor() 8941 MB/s, rmw enabled
[ 2.558613] raid6: using ssse3x2 recovery algorithm
[ 2.558858] xor: automatically using best checksumming function:
[ 2.598612] avx : 20958.000 MB/sec
[ 2.604588] Btrfs loaded
[ 2.706909] clocksource: Switched to clocksource tsc
[ 2.767828] EXT4-fs (sda4): mounted filesystem with ordered data mode. Opts: (null)
[ 2.975452] systemd[1]: systemd 231 running in system mode. (+PAM +AUDIT +SELINUX +IMA +APPARMOR +SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ -LZ4 +SECCOMP +BLKID +ELFUTILS +KMOD +IDN)
[ 2.975638] systemd[1]: Detected architecture x86-64.
[ 2.975806] systemd[1]: Set hostname to <cornaLaptop>.
[ 2.980773] psmouse serio2: trackpoint: IBM TrackPoint firmware: 0x0e, buttons: 3/3
[ 3.090414] systemd[1]: iodined.service: Cannot add dependency job, ignoring: Unit iodined.service is masked.
[ 3.091969] systemd[1]: Listening on Journal Audit Socket.
[ 3.092264] systemd[1]: Created slice System Slice.
[ 3.092348] systemd[1]: Started Forward Password Requests to Wall Directory Watch.
[ 3.092430] systemd[1]: Listening on Journal Socket.
[ 3.102993] systemd[1]: Starting Load Kernel Modules...
[ 3.104472] systemd[1]: tmp.mount: Directory /tmp to mount over is not empty, mounting anyway.
[ 3.105236] systemd[1]: Mounting Temporary Directory...
[ 3.105473] systemd[1]: Started Dispatch Password Requests to Console Directory Watch.
[ 3.105654] systemd[1]: Listening on LVM2 poll daemon socket.
[ 3.106604] systemd[1]: Mounting RPC Pipe File System...
[ 3.106746] systemd[1]: Listening on Journal Socket (/dev/log).
[ 3.106892] systemd[1]: Listening on /dev/initctl Compatibility Named Pipe.
[ 3.107000] systemd[1]: Listening on LVM2 metadata daemon socket.
[ 3.107103] systemd[1]: Listening on RPCbind Server Activation Socket.
[ 3.108214] systemd[1]: Starting Set the console keyboard layout...
[ 3.108267] systemd[1]: Reached target Swap.
[ 3.108362] systemd[1]: Reached target Encrypted Volumes.
[ 3.108741] systemd[1]: Created slice system-systemd\x2dfsck.slice.
[ 3.108855] systemd[1]: Listening on Device-mapper event daemon FIFOs.
[ 3.108952] systemd[1]: Listening on udev Kernel Socket.
[ 3.109217] systemd[1]: Created slice User and Session Slice.
[ 3.109262] systemd[1]: Reached target Slices.
[ 3.110216] systemd[1]: Starting Monitoring of LVM2 mirrors, snapshots etc. using dmeventd or progress polling...
[ 3.111645] systemd[1]: Mounting Debug File System...
[ 3.112541] systemd[1]: Mounting Huge Pages File System...
[ 3.112962] systemd[1]: Set up automount Arbitrary Executable File Formats File System Automount Point.
[ 3.115111] systemd[1]: Starting Create list of required static device nodes for the current kernel...
[ 3.116466] systemd[1]: Mounting POSIX Message Queue File System...
[ 3.116562] systemd[1]: Listening on fsck to fsckd communication Socket.
[ 3.117285] systemd[1]: Starting Remount Root and Kernel File Systems...
[ 3.117439] systemd[1]: Listening on udev Control Socket.
[ 3.117496] systemd[1]: Listening on Syslog Socket.
[ 3.118307] systemd[1]: Starting Journal Service...
[ 3.118347] systemd[1]: Reached target User and Group Name Lookups.
[ 3.119469] systemd[1]: Starting Uncomplicated firewall...
[ 3.119665] systemd[1]: Created slice system-getty.slice.
[ 3.121417] systemd[1]: Mounted Huge Pages File System.
[ 3.121477] systemd[1]: Mounted Debug File System.
[ 3.121508] systemd[1]: Mounted Temporary Directory.
[ 3.122070] systemd[1]: Started Create list of required static device nodes for the current kernel.
[ 3.122735] lp: driver loaded but no devices found
[ 3.123466] systemd[1]: Starting Create Static Device Nodes in /dev...
[ 3.124579] systemd[1]: Mounted POSIX Message Queue File System.
[ 3.124734] ppdev: user-space parallel port driver
[ 3.130731] EXT4-fs (sda4): re-mounted. Opts: discard,errors=remount-ro
[ 3.131551] RPC: Registered named UNIX socket transport module.
[ 3.131553] RPC: Registered udp transport module.
[ 3.131555] RPC: Registered tcp transport module.
[ 3.131555] RPC: Registered tcp NFSv4.1 backchannel transport module.
[ 3.132814] systemd[1]: Mounted RPC Pipe File System.
[ 3.133173] systemd[1]: Started Remount Root and Kernel File Systems.
[ 3.135141] systemd[1]: Starting udev Coldplug all Devices...
[ 3.135800] systemd[1]: Starting Load/Save Random Seed...
[ 3.136303] systemd[1]: Started Load Kernel Modules.
[ 3.137088] systemd[1]: Starting Apply Kernel Variables...
[ 3.138792] systemd[1]: Started LVM2 metadata daemon.
[ 3.142639] systemd[1]: Started Load/Save Random Seed.
[ 3.148052] systemd[1]: Started Create Static Device Nodes in /dev.
[ 3.148777] systemd[1]: Starting udev Kernel Device Manager...
[ 3.151851] systemd[1]: Started Apply Kernel Variables.
[ 3.156636] systemd[1]: Started Monitoring of LVM2 mirrors, snapshots etc. using dmeventd or progress polling.
[ 3.171746] ip_tables: (C) 2000-2006 Netfilter Core Team
[ 3.176313] systemd[1]: Started Journal Service.
[ 3.180962] nf_conntrack version 0.5.0 (65536 buckets, 262144 max)
[ 3.187410] ip6_tables: (C) 2000-2006 Netfilter Core Team
[ 3.194936] systemd-journald[1030]: Received request to flush runtime journal from PID 1
[ 3.273636] input: TPPS/2 IBM TrackPoint as /devices/platform/i8042/serio1/serio2/input/input3
[ 3.280020] input: Sleep Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/device:1f/PNP0C09:00/PNP0C0E:00/input/input10
[ 3.280027] ACPI: Sleep Button [SLPB]
[ 3.280085] input: Lid Switch as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/device:1f/PNP0C09:00/PNP0C0D:00/input/input11
[ 3.280202] ACPI: Lid Switch [LID]
[ 3.280262] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input12
[ 3.280265] ACPI: Power Button [PWRF]
[ 3.291111] tpm_tis 00:06: 1.2 TPM (device-id 0x0, rev-id 78)
[ 3.309065] [drm] Initialized drm 1.1.0 20060810
[ 3.312038] ACPI: AC Adapter [AC] (off-line)
[ 3.325375] Non-volatile memory driver v1.3
[ 3.328022] [drm] Memory usable by graphics device = 2048M
[ 3.328114] [drm] Replacing VGA console driver
[ 3.328194] thinkpad_acpi: ThinkPad ACPI Extras v0.25
[ 3.328194] thinkpad_acpi: http://ibm-acpi.sf.net/
[ 3.328195] thinkpad_acpi: ThinkPad BIOS CBET4000 4.4-1609-gddb2465, EC 8DHT34WW-3.20
[ 3.328195] thinkpad_acpi: Lenovo ThinkPad X220 Tablet, model 4294CTO
[ 3.328568] thinkpad_acpi: This ThinkPad has standard ACPI backlight brightness control, supported by the ACPI video driver
[ 3.328568] thinkpad_acpi: Disabling thinkpad-acpi brightness events by default...
[ 3.330248] Console: switching to colour dummy device 80x25
[ 3.332702] ACPI: Battery Slot [BAT0] (battery present)
[ 3.332834] ACPI: Battery Slot [BAT1] (battery absent)
[ 3.335034] thinkpad_acpi: Standard ACPI backlight interface available, not loading native one
[ 3.335219] thinkpad_acpi: Console audio control enabled, mode: monitor (read only)
[ 3.337685] input: ThinkPad Extra Buttons as /devices/platform/thinkpad_acpi/input/input13
[ 3.348251] sd 0:0:0:0: Attached scsi generic sg0 type 0
[ 3.388705] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
[ 3.388709] [drm] Driver supports precise vblank timestamp query.
[ 3.388964] vgaarb: device changed decodes: PCI:0000:00:02.0,olddecodes=io+mem,decodes=io+mem:owns=io+mem
[ 3.436821] ACPI: Video Device [GFX0] (multi-head: yes rom: no post: no)
[ 3.437834] acpi device:03: registered as cooling_device4
[ 3.437884] input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:00/input/input14
[ 3.437913] [drm] Initialized i915 1.6.0 20160229 for 0000:00:02.0 on minor 0
[ 3.437945] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[ 3.438113] ACPI Warning: SystemIO range 0x0000000000000528-0x000000000000052F conflicts with OpRegion 0x0000000000000500-0x000000000000057F (\PMIO) (20160108/utaddress-255)
[ 3.438119] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[ 3.438123] ACPI Warning: SystemIO range 0x00000000000004C0-0x00000000000004CF conflicts with OpRegion 0x0000000000000480-0x00000000000004EB (\GPIO) (20160108/utaddress-255)
[ 3.438127] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[ 3.438128] ACPI Warning: SystemIO range 0x00000000000004B0-0x00000000000004BF conflicts with OpRegion 0x0000000000000480-0x00000000000004EB (\GPIO) (20160108/utaddress-255)
[ 3.438132] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[ 3.438133] ACPI Warning: SystemIO range 0x0000000000000480-0x00000000000004AF conflicts with OpRegion 0x0000000000000480-0x00000000000004EB (\GPIO) (20160108/utaddress-255)
[ 3.438137] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[ 3.438138] lpc_ich: Resource conflict(s) found affecting gpio_ich
[ 3.438238] i801_smbus 0000:00:1f.3: SMBus using PCI interrupt
[ 3.446489] input: PC Speaker as /devices/platform/pcspkr/input/input15
[ 3.451435] snd_hda_codec_conexant hdaudioC0D0: CX20590: BIOS auto-probing.
[ 3.451901] snd_hda_codec_conexant hdaudioC0D0: autoconfig for CX20590: line_outs=1 (0x1f/0x0/0x0/0x0/0x0) type:speaker
[ 3.451905] snd_hda_codec_conexant hdaudioC0D0: speaker_outs=0 (0x0/0x0/0x0/0x0/0x0)
[ 3.451907] snd_hda_codec_conexant hdaudioC0D0: hp_outs=2 (0x1c/0x19/0x0/0x0/0x0)
[ 3.451909] snd_hda_codec_conexant hdaudioC0D0: mono: mono_out=0x0
[ 3.451911] snd_hda_codec_conexant hdaudioC0D0: inputs:
[ 3.451914] snd_hda_codec_conexant hdaudioC0D0: Internal Mic=0x23
[ 3.451916] snd_hda_codec_conexant hdaudioC0D0: Mic=0x1b
[ 3.451918] snd_hda_codec_conexant hdaudioC0D0: Dock Mic=0x1a
[ 3.453227] snd_hda_codec_conexant hdaudioC0D0: Enable sync_write for stable communication
[ 3.468767] EXT4-fs (sda5): mounted filesystem with ordered data mode. Opts: (null)
[ 3.485503] input: HDA Digital PCBeep as /devices/pci0000:00/0000:00:1b.0/sound/card0/input16
[ 3.485898] input: HDA Intel PCH Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input17
[ 3.485968] input: HDA Intel PCH Dock Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input18
[ 3.486037] input: HDA Intel PCH Dock Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card0/input19
[ 3.486109] input: HDA Intel PCH Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card0/input20
[ 3.486177] input: HDA Intel PCH HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:1b.0/sound/card0/input21
[ 3.486246] input: HDA Intel PCH HDMI/DP,pcm=7 as /devices/pci0000:00/0000:00:1b.0/sound/card0/input22
[ 3.486315] input: HDA Intel PCH HDMI/DP,pcm=8 as /devices/pci0000:00/0000:00:1b.0/sound/card0/input23
[ 3.488245] Intel(R) Wireless WiFi driver for Linux
[ 3.488248] Copyright(c) 2003- 2015 Intel Corporation
[ 3.495193] iwlwifi 0000:02:00.0: firmware: direct-loading firmware iwlwifi-6000g2b-6.ucode
[ 3.495384] iwlwifi 0000:02:00.0: loaded firmware version 18.168.6.1 op_mode iwldvm
[ 3.496537] FAT-fs (sda1): utf8 is not a recommended IO charset for FAT filesystems, filesystem will be case sensitive!
[ 3.508690] iwlwifi 0000:02:00.0: CONFIG_IWLWIFI_DEBUG disabled
[ 3.508694] iwlwifi 0000:02:00.0: CONFIG_IWLWIFI_DEBUGFS disabled
[ 3.508696] iwlwifi 0000:02:00.0: CONFIG_IWLWIFI_DEVICE_TRACING disabled
[ 3.508699] iwlwifi 0000:02:00.0: Detected Intel(R) Centrino(R) Advanced-N 6235 AGN, REV=0xB0
[ 3.509581] iwlwifi 0000:02:00.0: L1 Disabled - LTR Disabled
[ 3.530285] intel_rapl: Found RAPL domain package
[ 3.530290] intel_rapl: Found RAPL domain core
[ 3.530292] intel_rapl: Found RAPL domain uncore
[ 3.542545] ieee80211 phy0: Selected rate control algorithm 'iwl-agn-rs'
[ 3.608588] random: nonblocking pool is initialized
[ 3.630670] [drm] GMBUS [i915 gmbus dpb] timed out, falling back to bit banging on pin 5
[ 3.715814] iTCO_vendor_support: vendor-support=0
[ 3.716301] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.11
[ 3.716371] iTCO_wdt: Found a Cougar Point TCO device (Version=2, TCOBASE=0x0560)
[ 3.717771] iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0)
[ 3.864738] iwlwifi 0000:02:00.0 wlp2s0: renamed from wlan0
[ 3.992511] fbcon: inteldrmfb (fb0) is primary device
[ 4.952900] media: Linux media interface: v0.10
[ 4.954990] Bluetooth: Core ver 2.21
[ 4.955009] NET: Registered protocol family 31
[ 4.955010] Bluetooth: HCI device and connection manager initialized
[ 4.955014] Bluetooth: HCI socket layer initialized
[ 4.955018] Bluetooth: L2CAP socket layer initialized
[ 4.955026] Bluetooth: SCO socket layer initialized
[ 4.958476] Linux video capture interface: v2.00
[ 5.020065] usbcore: registered new interface driver btusb
[ 5.023441] uvcvideo: Found UVC 1.00 device Integrated Camera (04f2:b217)
[ 5.025082] uvcvideo 1-1.6:1.0: Entity type for entity Extension 3 was not initialized!
[ 5.025088] uvcvideo 1-1.6:1.0: Entity type for entity Processing 2 was not initialized!
[ 5.025093] uvcvideo 1-1.6:1.0: Entity type for entity Camera 1 was not initialized!
[ 5.025332] input: Integrated Camera as /devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.6/1-1.6:1.0/input/input24
[ 5.025496] usbcore: registered new interface driver uvcvideo
[ 5.025497] USB Video Class driver (1.1.1)
[ 5.128138] Console: switching to colour frame buffer device 170x48
[ 5.135940] i915 0000:00:02.0: fb0: inteldrmfb frame buffer device
[ 5.414915] IPv6: ADDRCONF(NETDEV_UP): wlp2s0: link is not ready
[ 5.415023] iwlwifi 0000:02:00.0: L1 Disabled - LTR Disabled
[ 5.421980] iwlwifi 0000:02:00.0: L1 Disabled - LTR Disabled
[ 5.422082] iwlwifi 0000:02:00.0: Radio type=0x2-0x1-0x0
[ 5.695920] iwlwifi 0000:02:00.0: L1 Disabled - LTR Disabled
[ 5.702698] iwlwifi 0000:02:00.0: L1 Disabled - LTR Disabled
[ 5.702831] iwlwifi 0000:02:00.0: Radio type=0x2-0x1-0x0
[ 5.774832] cdc_wdm 2-1.4:1.5: cdc-wdm0: USB WDM device
[ 5.776788] cdc_wdm 2-1.4:1.8: cdc-wdm1: USB WDM device
[ 5.776853] usbcore: registered new interface driver cdc_wdm
[ 5.776980] cdc_acm 2-1.4:1.1: ttyACM0: USB ACM device
[ 5.778585] cdc_acm 2-1.4:1.3: ttyACM1: USB ACM device
[ 5.784125] IPv6: ADDRCONF(NETDEV_UP): wlp2s0: link is not ready
[ 5.793315] IPv6: ADDRCONF(NETDEV_UP): enp0s25: link is not ready
[ 5.799340] cdc_ncm 2-1.4:1.6: MAC-Address: 02:80:37:ec:02:00
[ 6.047107] IPv6: ADDRCONF(NETDEV_UP): enp0s25: link is not ready
[ 6.047561] cdc_ncm 2-1.4:1.6 wwan0: register 'cdc_ncm' at usb-0000:00:1d.0-1.4, Mobile Broadband Network Device, 02:80:37:ec:02:00
[ 6.047642] usbcore: registered new interface driver cdc_ncm
[ 6.047824] cdc_acm 2-1.4:1.9: ttyACM2: USB ACM device
[ 6.048304] usbcore: registered new interface driver cdc_acm
[ 6.048310] cdc_acm: USB Abstract Control Model driver for USB modems and ISDN adapters
[ 6.049166] usbcore: registered new interface driver cdc_mbim
[ 6.053690] usb 2-1.4: usbfs: interface 1 claimed by cdc_acm while 'usb_modeswitch' sets config #2
[ 6.053702] usb 2-1.4: usbfs: interface 1 claimed by cdc_acm while 'usb_modeswitch' sets config #2
[ 6.053708] usb 2-1.4: usbfs: interface 1 claimed by cdc_acm while 'usb_modeswitch' sets config #2
[ 6.053713] usb 2-1.4: usbfs: interface 1 claimed by cdc_acm while 'usb_modeswitch' sets config #2
[ 6.053718] usb 2-1.4: usbfs: interface 1 claimed by cdc_acm while 'usb_modeswitch' sets config #2
[ 6.058091] cdc_ncm 2-1.4:1.6 wwp0s29u1u4i6: renamed from wwan0
[ 6.154933] Ebtables v2.0 registered
[ 6.163540] IPv6: ADDRCONF(NETDEV_UP): wlp2s0: link is not ready
[ 6.425137] bridge: automatic filtering via arp/ip/ip6tables has been deprecated. Update your scripts to load br_netfilter if you need this.
[ 6.431516] tun: Universal TUN/TAP device driver, 1.6
[ 6.431526] tun: (C) 1999-2004 Max Krasnyansky <maxk@qualcomm.com>
[ 6.511064] virbr0: port 1(virbr0-nic) entered blocking state
[ 6.511072] virbr0: port 1(virbr0-nic) entered disabled state
[ 6.511257] device virbr0-nic entered promiscuous mode
[ 6.650482] virbr0: port 1(virbr0-nic) entered blocking state
[ 6.650489] virbr0: port 1(virbr0-nic) entered listening state
[ 6.706173] virbr0: port 1(virbr0-nic) entered disabled state
[ 6.715509] device virbr0-nic left promiscuous mode
[ 6.715537] virbr0: port 1(virbr0-nic) entered disabled state
[ 7.316952] cdc_wdm 2-1.4:1.5: wdm_int_callback - 0 bytes
[ 7.331979] cdc_wdm 2-1.4:1.8: wdm_int_callback - 0 bytes
[ 8.908970] e1000e: enp0s25 NIC Link is Up 1000 Mbps Full Duplex, Flow Control: Rx/Tx
[ 8.909070] IPv6: ADDRCONF(NETDEV_CHANGE): enp0s25: link becomes ready
[ 9.371655] IPv6: ADDRCONF(NETDEV_UP): wlp2s0: link is not ready
[ 9.382474] acpi_call: Cannot get handle: Error: AE_NOT_FOUND
[ 9.401348] acpi_call: Cannot get handle: Error: AE_NOT_FOUND
[ 11.243705] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
[ 11.243710] Bluetooth: BNEP filters: protocol multicast
[ 11.243717] Bluetooth: BNEP socket layer initialized
[ 11.261602] Bluetooth: RFCOMM TTY layer initialized
[ 11.261612] Bluetooth: RFCOMM socket layer initialized
[ 11.261621] Bluetooth: RFCOMM ver 1.11
[ 23.018422] fuse init (API version 7.24)
[ 30.182399] wlp2s0: authenticate with 04:a1:51:19:63:50
[ 30.185223] wlp2s0: send auth to 04:a1:51:19:63:50 (try 1/3)
[ 30.205813] wlp2s0: send auth to 04:a1:51:19:63:50 (try 2/3)
[ 30.224411] wlp2s0: send auth to 04:a1:51:19:63:50 (try 3/3)
[ 30.245521] wlp2s0: authentication with 04:a1:51:19:63:50 timed out
[ 41.721372] wlp2s0: authenticate with 04:a1:51:19:63:50
[ 41.722734] wlp2s0: send auth to 04:a1:51:19:63:50 (try 1/3)
[ 41.742743] wlp2s0: send auth to 04:a1:51:19:63:50 (try 2/3)
[ 41.762648] wlp2s0: send auth to 04:a1:51:19:63:50 (try 3/3)
[ 41.786419] wlp2s0: authentication with 04:a1:51:19:63:50 timed out