blob: 8d7580d74b3fe1e670bb1a88d645a78bad962f27 [file] [log] [blame]
[ 0.000000] Initializing cgroup subsys cpuset
[ 0.000000] Initializing cgroup subsys cpu
[ 0.000000] Initializing cgroup subsys cpuacct
[ 0.000000] Linux version 4.1.15-gentoo-r1 (root@tamako) (gcc version 4.9.3 (Gentoo 4.9.3 p1.1, pie-0.6.2) ) #1 SMP PREEMPT Sat Feb 6 13:13:06 CET 2016
[ 0.000000] Command line: BOOT_IMAGE=/kernel quiet initrd=/initramfs.cpio.gz
[ 0.000000] e820: BIOS-provided physical RAM map:
[ 0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009fbff] usable
[ 0.000000] BIOS-e820: [mem 0x000000000009fc00-0x000000000009ffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000000f0000-0x00000000000fffff] reserved
[ 0.000000] BIOS-e820: [mem 0x0000000000100000-0x000000001fffffff] usable
[ 0.000000] BIOS-e820: [mem 0x0000000020000000-0x00000000201fffff] reserved
[ 0.000000] BIOS-e820: [mem 0x0000000020200000-0x000000003fffffff] usable
[ 0.000000] BIOS-e820: [mem 0x0000000040000000-0x00000000401fffff] reserved
[ 0.000000] BIOS-e820: [mem 0x0000000040200000-0x00000000bfe78fff] usable
[ 0.000000] BIOS-e820: [mem 0x00000000bfe79000-0x00000000c89fffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000f0000000-0x00000000f3ffffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fed90000-0x00000000fed91fff] reserved
[ 0.000000] BIOS-e820: [mem 0x0000000100000000-0x0000000436dfffff] usable
[ 0.000000] NX (Execute Disable) protection: active
[ 0.000000] SMBIOS 2.7 present.
[ 0.000000] DMI: LENOVO 4291B24/4291B24, BIOS CBET4000 4.3-377-gbe63a24 03/05/2016
[ 0.000000] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
[ 0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable
[ 0.000000] e820: last_pfn = 0x436e00 max_arch_pfn = 0x400000000
[ 0.000000] MTRR default type: write-back
[ 0.000000] MTRR fixed ranges enabled:
[ 0.000000] 00000-9FFFF write-back
[ 0.000000] A0000-BFFFF uncachable
[ 0.000000] C0000-FFFFF write-back
[ 0.000000] MTRR variable ranges enabled:
[ 0.000000] 0 base 0C0000000 mask FF0000000 uncachable
[ 0.000000] 1 base 0D0000000 mask FF0000000 write-combining
[ 0.000000] 2 base 0E0000000 mask FE0000000 uncachable
[ 0.000000] 3 disabled
[ 0.000000] 4 disabled
[ 0.000000] 5 disabled
[ 0.000000] 6 disabled
[ 0.000000] 7 disabled
[ 0.000000] 8 disabled
[ 0.000000] 9 disabled
[ 0.000000] PAT configuration [0-7]: WB WC UC- UC WB WC UC- UC
[ 0.000000] e820: last_pfn = 0xbfe79 max_arch_pfn = 0x400000000
[ 0.000000] Scanning 1 areas for low memory corruption
[ 0.000000] Base memory trampoline at [ffff880000099000] 99000 size 24576
[ 0.000000] reserving inaccessible SNB gfx pages
[ 0.000000] init_memory_mapping: [mem 0x00000000-0x000fffff]
[ 0.000000] [mem 0x00000000-0x000fffff] page 4k
[ 0.000000] BRK [0x01ddd000, 0x01dddfff] PGTABLE
[ 0.000000] BRK [0x01dde000, 0x01ddefff] PGTABLE
[ 0.000000] BRK [0x01ddf000, 0x01ddffff] PGTABLE
[ 0.000000] init_memory_mapping: [mem 0x436c00000-0x436dfffff]
[ 0.000000] [mem 0x436c00000-0x436dfffff] page 2M
[ 0.000000] BRK [0x01de0000, 0x01de0fff] PGTABLE
[ 0.000000] init_memory_mapping: [mem 0x420000000-0x436bfffff]
[ 0.000000] [mem 0x420000000-0x436bfffff] page 2M
[ 0.000000] init_memory_mapping: [mem 0x400000000-0x41fffffff]
[ 0.000000] [mem 0x400000000-0x41fffffff] page 2M
[ 0.000000] init_memory_mapping: [mem 0x00100000-0x1fffffff]
[ 0.000000] [mem 0x00100000-0x001fffff] page 4k
[ 0.000000] [mem 0x00200000-0x1fffffff] page 2M
[ 0.000000] init_memory_mapping: [mem 0x20200000-0x3fffffff]
[ 0.000000] [mem 0x20200000-0x3fffffff] page 2M
[ 0.000000] init_memory_mapping: [mem 0x40200000-0xbfe78fff]
[ 0.000000] [mem 0x40200000-0xbfdfffff] page 2M
[ 0.000000] [mem 0xbfe00000-0xbfe78fff] page 4k
[ 0.000000] BRK [0x01de1000, 0x01de1fff] PGTABLE
[ 0.000000] BRK [0x01de2000, 0x01de2fff] PGTABLE
[ 0.000000] init_memory_mapping: [mem 0x100000000-0x3ffffffff]
[ 0.000000] [mem 0x100000000-0x3ffffffff] page 2M
[ 0.000000] RAMDISK: [mem 0x7fe58000-0x7fffffff]
[ 0.000000] ACPI: Early table checksum verification disabled
[ 0.000000] ACPI: RSDP 0x00000000000F0DF0 000024 (v02 CORE )
[ 0.000000] ACPI: XSDT 0x00000000BFE980E0 00005C (v01 CORE COREBOOT 00000000 CORE 00000000)
[ 0.000000] ACPI: FACP 0x00000000BFE9B5C0 0000F4 (v04 CORE COREBOOT 00000000 CORE 00000000)
[ 0.000000] ACPI: DSDT 0x00000000BFE98280 003336 (v02 COREv4 COREBOOT 20110725 INTL 20150619)
[ 0.000000] ACPI: FACS 0x00000000BFE98240 000040
[ 0.000000] ACPI: FACS 0x00000000BFE98240 000040
[ 0.000000] ACPI: SSDT 0x00000000BFE9B6C0 001525 (v02 CORE COREBOOT 0000002A CORE 0000002A)
[ 0.000000] ACPI: MCFG 0x00000000BFE9CBF0 00003C (v01 CORE COREBOOT 00000000 CORE 00000000)
[ 0.000000] ACPI: TCPA 0x00000000BFE9CC30 000032 (v02 CORE COREBOOT 00000000 CORE 00000000)
[ 0.000000] ACPI: APIC 0x00000000BFE9CC70 00006C (v01 CORE COREBOOT 00000000 CORE 00000000)
[ 0.000000] ACPI: DMAR 0x00000000BFE9CCE0 0000A8 (v01 CORE COREBOOT 00000000 CORE 00000000)
[ 0.000000] ACPI: HPET 0x00000000BFE9CD90 000038 (v01 CORE COREBOOT 00000000 CORE 00000000)
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] No NUMA configuration found
[ 0.000000] Faking a node at [mem 0x0000000000000000-0x0000000436dfffff]
[ 0.000000] NODE_DATA(0) allocated [mem 0x436def000-0x436df2fff]
[ 0.000000] [ffffea0000000000-ffffea0010dfffff] PMD -> [ffff880426600000-ffff8804363fffff] on node 0
[ 0.000000] Zone ranges:
[ 0.000000] DMA [mem 0x0000000000001000-0x0000000000ffffff]
[ 0.000000] DMA32 [mem 0x0000000001000000-0x00000000ffffffff]
[ 0.000000] Normal [mem 0x0000000100000000-0x0000000436dfffff]
[ 0.000000] Movable zone start for each node
[ 0.000000] Early memory node ranges
[ 0.000000] node 0: [mem 0x0000000000001000-0x000000000009efff]
[ 0.000000] node 0: [mem 0x0000000000100000-0x000000001fffffff]
[ 0.000000] node 0: [mem 0x0000000020200000-0x000000003fffffff]
[ 0.000000] node 0: [mem 0x0000000040200000-0x00000000bfe78fff]
[ 0.000000] node 0: [mem 0x0000000100000000-0x0000000436dfffff]
[ 0.000000] Initmem setup node 0 [mem 0x0000000000001000-0x0000000436dfffff]
[ 0.000000] On node 0 totalpages: 4155415
[ 0.000000] DMA zone: 64 pages used for memmap
[ 0.000000] DMA zone: 158 pages reserved
[ 0.000000] DMA zone: 3998 pages, LIFO batch:0
[ 0.000000] DMA32 zone: 12202 pages used for memmap
[ 0.000000] DMA32 zone: 780921 pages, LIFO batch:31
[ 0.000000] Normal zone: 52664 pages used for memmap
[ 0.000000] Normal zone: 3370496 pages, LIFO batch:31
[ 0.000000] Reserving Intel graphics stolen memory at 0xc0a00000-0xc89fffff
[ 0.000000] ACPI: PM-Timer IO Port: 0x508
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-23
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[ 0.000000] ACPI: IRQ0 used by override.
[ 0.000000] ACPI: IRQ9 used by override.
[ 0.000000] Using ACPI (MADT) for SMP configuration information
[ 0.000000] ACPI: HPET id: 0x8086a701 base: 0xfed00000
[ 0.000000] smpboot: Allowing 4 CPUs, 0 hotplug CPUs
[ 0.000000] PM: Registered nosave memory: [mem 0x00000000-0x00000fff]
[ 0.000000] PM: Registered nosave memory: [mem 0x0009f000-0x0009ffff]
[ 0.000000] PM: Registered nosave memory: [mem 0x000a0000-0x000effff]
[ 0.000000] PM: Registered nosave memory: [mem 0x000f0000-0x000fffff]
[ 0.000000] PM: Registered nosave memory: [mem 0x20000000-0x201fffff]
[ 0.000000] PM: Registered nosave memory: [mem 0x40000000-0x401fffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xbfe79000-0xc89fffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xc8a00000-0xefffffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xf0000000-0xf3ffffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xf4000000-0xfed8ffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfed90000-0xfed91fff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfed92000-0xffffffff]
[ 0.000000] e820: [mem 0xc8a00000-0xefffffff] available for PCI devices
[ 0.000000] clocksource refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 1910969940391419 ns
[ 0.000000] setup_percpu: NR_CPUS:4 nr_cpumask_bits:4 nr_cpu_ids:4 nr_node_ids:1
[ 0.000000] PERCPU: Embedded 30 pages/cpu @ffff880436a00000 s90200 r0 d32680 u524288
[ 0.000000] pcpu-alloc: s90200 r0 d32680 u524288 alloc=1*2097152
[ 0.000000] pcpu-alloc: [0] 0 1 2 3
[ 0.000000] Built 1 zonelists in Node order, mobility grouping on. Total pages: 4090327
[ 0.000000] Policy zone: Normal
[ 0.000000] Kernel command line: BOOT_IMAGE=/kernel quiet initrd=/initramfs.cpio.gz
[ 0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes)
[ 0.000000] xsave: enabled xstate_bv 0x7, cntxt size 0x340 using standard form
[ 0.000000] Memory: 16278260K/16621660K available (8831K kernel code, 656K rwdata, 3008K rodata, 892K init, 744K bss, 343400K reserved, 0K cma-reserved)
[ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
[ 0.000000] Preemptible hierarchical RCU implementation.
[ 0.000000] NR_IRQS:4352 nr_irqs:456 16
[ 0.000000] Console: colour VGA+ 80x25
[ 0.000000] console [tty0] enabled
[ 0.000000] clocksource hpet: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 133484882848 ns
[ 0.000000] hpet clockevent registered
[ 0.000000] tsc: Fast TSC calibration using PIT
[ 0.000000] tsc: Detected 2494.443 MHz processor
[ 0.000035] Calibrating delay loop (skipped), value calculated using timer frequency.. 4988.88 BogoMIPS (lpj=2494443)
[ 0.000038] pid_max: default: 32768 minimum: 301
[ 0.000042] ACPI: Core revision 20150410
[ 0.002301] ACPI: All ACPI Tables successfully acquired
[ 0.003164] Dentry cache hash table entries: 2097152 (order: 12, 16777216 bytes)
[ 0.006332] Inode-cache hash table entries: 1048576 (order: 11, 8388608 bytes)
[ 0.007724] Mount-cache hash table entries: 32768 (order: 6, 262144 bytes)
[ 0.007740] Mountpoint-cache hash table entries: 32768 (order: 6, 262144 bytes)
[ 0.007942] Initializing cgroup subsys memory
[ 0.007948] Initializing cgroup subsys freezer
[ 0.007967] CPU: Physical Processor ID: 0
[ 0.007968] CPU: Processor Core ID: 0
[ 0.007973] mce: CPU supports 7 MCE banks
[ 0.007983] CPU0: Thermal monitoring enabled (TM1)
[ 0.007987] process: using mwait in idle threads
[ 0.007990] Last level iTLB entries: 4KB 512, 2MB 8, 4MB 8
[ 0.007991] Last level dTLB entries: 4KB 512, 2MB 32, 4MB 32, 1GB 0
[ 0.008525] Freeing SMP alternatives memory: 32K (ffffffff81d19000 - ffffffff81d21000)
[ 0.009093] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[ 0.019115] TSC deadline timer enabled
[ 0.019118] smpboot: CPU0: Intel(R) Core(TM) i5-2520M CPU @ 2.50GHz (fam: 06, model: 2a, stepping: 07)
[ 0.019132] Performance Events: PEBS fmt1+, 16-deep LBR, SandyBridge events, full-width counters, Intel PMU driver.
[ 0.019151] ... version: 3
[ 0.019152] ... bit width: 48
[ 0.019153] ... generic registers: 4
[ 0.019154] ... value mask: 0000ffffffffffff
[ 0.019155] ... max period: 0000ffffffffffff
[ 0.019156] ... fixed-purpose events: 3
[ 0.019157] ... event mask: 000000070000000f
[ 0.025241] x86: Booting SMP configuration:
[ 0.025246] .... node #0, CPUs: #1 #2 #3
[ 0.069077] x86: Booted up 1 node, 4 CPUs
[ 0.069080] smpboot: Total of 4 processors activated (19955.54 BogoMIPS)
[ 0.071784] devtmpfs: initialized
[ 0.072028] clocksource jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 1911260446275000 ns
[ 0.072101] RTC time: 22:11:19, date: 03/08/16
[ 0.072188] NET: Registered protocol family 16
[ 0.076694] cpuidle: using governor ladder
[ 0.082710] cpuidle: using governor menu
[ 0.082816] ACPI: bus type PCI registered
[ 0.082880] PCI: MMCONFIG for domain 0000 [bus 00-3f] at [mem 0xf0000000-0xf3ffffff] (base 0xf0000000)
[ 0.082883] PCI: MMCONFIG at [mem 0xf0000000-0xf3ffffff] reserved in E820
[ 0.082942] PCI: Using configuration type 1 for base access
[ 0.083062] perf_event_intel: PMU erratum BJ122, BV98, HSD29 worked around, HT is on
[ 0.086258] ACPI: Added _OSI(Module Device)
[ 0.086261] ACPI: Added _OSI(Processor Device)
[ 0.086262] ACPI: Added _OSI(3.0 _SCP Extensions)
[ 0.086263] ACPI: Added _OSI(Processor Aggregator Device)
[ 0.088722] ACPI : EC: EC started
[ 0.088770] ACPI: Interpreter enabled
[ 0.088775] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S1_] (20150410/hwxface-580)
[ 0.088779] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S2_] (20150410/hwxface-580)
[ 0.088791] ACPI: (supports S0 S3 S4 S5)
[ 0.088792] ACPI: Using IOAPIC for interrupt routing
[ 0.088814] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
[ 0.092386] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
[ 0.092392] acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI]
[ 0.092430] acpi PNP0A08:00: _OSC: OS now controls [PCIeHotplug PME AER PCIeCapability]
[ 0.092478] acpi PNP0A08:00: ignoring host bridge window [mem 0x000c4000-0x000c7fff window] (conflicts with Video ROM [mem 0x000c0000-0x000c6fff])
[ 0.092481] acpi PNP0A08:00: [Firmware Info]: MMCONFIG for domain 0000 [bus 00-3f] only partially covers this bridge
[ 0.092508] PCI host bridge to bus 0000:00
[ 0.092510] pci_bus 0000:00: root bus resource [bus 00-ff]
[ 0.092512] pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7 window]
[ 0.092514] pci_bus 0000:00: root bus resource [io 0x0d00-0xffff window]
[ 0.092516] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff window]
[ 0.092517] pci_bus 0000:00: root bus resource [mem 0x000c0000-0x000c3fff window]
[ 0.092519] pci_bus 0000:00: root bus resource [mem 0x000c8000-0x000cbfff window]
[ 0.092520] pci_bus 0000:00: root bus resource [mem 0x000cc000-0x000cffff window]
[ 0.092522] pci_bus 0000:00: root bus resource [mem 0x000d0000-0x000d3fff window]
[ 0.092524] pci_bus 0000:00: root bus resource [mem 0x000d4000-0x000d7fff window]
[ 0.092525] pci_bus 0000:00: root bus resource [mem 0x000d8000-0x000dbfff window]
[ 0.092527] pci_bus 0000:00: root bus resource [mem 0x000dc000-0x000dffff window]
[ 0.092528] pci_bus 0000:00: root bus resource [mem 0x000e0000-0x000e3fff window]
[ 0.092530] pci_bus 0000:00: root bus resource [mem 0x000e4000-0x000e7fff window]
[ 0.092531] pci_bus 0000:00: root bus resource [mem 0x000e8000-0x000ebfff window]
[ 0.092533] pci_bus 0000:00: root bus resource [mem 0x000ec000-0x000effff window]
[ 0.092534] pci_bus 0000:00: root bus resource [mem 0x000f0000-0x000fffff window]
[ 0.092536] pci_bus 0000:00: root bus resource [mem 0xc8a00000-0xefffffff window]
[ 0.092538] pci_bus 0000:00: root bus resource [mem 0xfed40000-0xfed44fff window]
[ 0.092545] pci 0000:00:00.0: [8086:0104] type 00 class 0x060000
[ 0.092622] pci 0000:00:02.0: [8086:0126] type 00 class 0x030000
[ 0.092632] pci 0000:00:02.0: reg 0x10: [mem 0xe1000000-0xe13fffff 64bit]
[ 0.092638] pci 0000:00:02.0: reg 0x18: [mem 0xd0000000-0xdfffffff 64bit pref]
[ 0.092642] pci 0000:00:02.0: reg 0x20: [io 0x3000-0x303f]
[ 0.092705] pci 0000:00:04.0: [8086:0103] type 00 class 0x118000
[ 0.092714] pci 0000:00:04.0: reg 0x10: [mem 0xe1620000-0xe1627fff 64bit]
[ 0.092832] pci 0000:00:16.0: [8086:1c3a] type 00 class 0x078000
[ 0.092853] pci 0000:00:16.0: reg 0x10: [mem 0xe1631000-0xe163100f 64bit]
[ 0.092924] pci 0000:00:16.0: PME# supported from D0 D3hot D3cold
[ 0.092992] pci 0000:00:19.0: [8086:1502] type 00 class 0x020000
[ 0.093007] pci 0000:00:19.0: reg 0x10: [mem 0xe1600000-0xe161ffff]
[ 0.093016] pci 0000:00:19.0: reg 0x14: [mem 0xe162c000-0xe162cfff]
[ 0.093024] pci 0000:00:19.0: reg 0x18: [io 0x3040-0x305f]
[ 0.093080] pci 0000:00:19.0: PME# supported from D0 D3hot D3cold
[ 0.093139] pci 0000:00:1a.0: [8086:1c2d] type 00 class 0x0c0320
[ 0.093157] pci 0000:00:1a.0: reg 0x10: [mem 0xe162e000-0xe162e3ff]
[ 0.093236] pci 0000:00:1a.0: PME# supported from D0 D3hot D3cold
[ 0.093266] pci 0000:00:1a.0: System wakeup disabled by ACPI
[ 0.093304] pci 0000:00:1b.0: [8086:1c20] type 00 class 0x040300
[ 0.093322] pci 0000:00:1b.0: reg 0x10: [mem 0xe1628000-0xe162bfff 64bit]
[ 0.093389] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
[ 0.093418] pci 0000:00:1b.0: System wakeup disabled by ACPI
[ 0.093458] pci 0000:00:1c.0: [8086:1c10] type 01 class 0x060400
[ 0.093562] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
[ 0.093636] pci 0000:00:1c.1: [8086:1c12] type 01 class 0x060400
[ 0.093751] pci 0000:00:1c.1: PME# supported from D0 D3hot D3cold
[ 0.093828] pci 0000:00:1c.3: [8086:1c16] type 01 class 0x060400
[ 0.093940] pci 0000:00:1c.3: PME# supported from D0 D3hot D3cold
[ 0.094012] pci 0000:00:1c.4: [8086:1c18] type 01 class 0x060400
[ 0.094124] pci 0000:00:1c.4: PME# supported from D0 D3hot D3cold
[ 0.094196] pci 0000:00:1c.5: [8086:1c1c] type 01 class 0x060400
[ 0.094296] pci 0000:00:1c.5: PME# supported from D0 D3hot D3cold
[ 0.094367] pci 0000:00:1d.0: [8086:1c26] type 00 class 0x0c0320
[ 0.094385] pci 0000:00:1d.0: reg 0x10: [mem 0xe162f000-0xe162f3ff]
[ 0.094464] pci 0000:00:1d.0: PME# supported from D0 D3hot D3cold
[ 0.094495] pci 0000:00:1d.0: System wakeup disabled by ACPI
[ 0.094531] pci 0000:00:1f.0: [8086:1c4f] type 00 class 0x060100
[ 0.094683] pci 0000:00:1f.2: [8086:1c03] type 00 class 0x010601
[ 0.094700] pci 0000:00:1f.2: reg 0x10: [io 0x3080-0x3087]
[ 0.094709] pci 0000:00:1f.2: reg 0x14: [io 0x3090-0x3093]
[ 0.094718] pci 0000:00:1f.2: reg 0x18: [io 0x3088-0x308f]
[ 0.094727] pci 0000:00:1f.2: reg 0x1c: [io 0x3094-0x3097]
[ 0.094736] pci 0000:00:1f.2: reg 0x20: [io 0x3060-0x307f]
[ 0.094747] pci 0000:00:1f.2: reg 0x24: [mem 0xe162d000-0xe162d7ff]
[ 0.094790] pci 0000:00:1f.2: PME# supported from D3hot
[ 0.094851] pci 0000:00:1f.3: [8086:1c22] type 00 class 0x0c0500
[ 0.094867] pci 0000:00:1f.3: reg 0x10: [mem 0xe1630000-0xe16300ff 64bit]
[ 0.094888] pci 0000:00:1f.3: reg 0x20: [io 0x0400-0x041f]
[ 0.095014] pci 0000:00:1c.0: PCI bridge to [bus 01]
[ 0.095168] pci 0000:02:00.0: [8086:0085] type 00 class 0x028000
[ 0.095296] pci 0000:02:00.0: reg 0x10: [mem 0xe1400000-0xe1401fff 64bit]
[ 0.095742] pci 0000:02:00.0: PME# supported from D0 D3hot D3cold
[ 0.097937] pci 0000:00:1c.1: PCI bridge to [bus 02]
[ 0.097946] pci 0000:00:1c.1: bridge window [mem 0xe1400000-0xe14fffff]
[ 0.098013] pci 0000:00:1c.3: PCI bridge to [bus 03]
[ 0.098019] pci 0000:00:1c.3: bridge window [io 0x2000-0x2fff]
[ 0.098024] pci 0000:00:1c.3: bridge window [mem 0xe0800000-0xe0ffffff]
[ 0.098033] pci 0000:00:1c.3: bridge window [mem 0xe0000000-0xe07fffff 64bit pref]
[ 0.098126] pci 0000:04:00.0: [1180:e822] type 00 class 0x080501
[ 0.098160] pci 0000:04:00.0: MMC controller base frequency changed to 50Mhz.
[ 0.098195] pci 0000:04:00.0: reg 0x10: [mem 0xe1500000-0xe15000ff]
[ 0.098477] pci 0000:04:00.0: supports D1 D2
[ 0.098479] pci 0000:04:00.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.099829] pci 0000:00:1c.4: PCI bridge to [bus 04]
[ 0.099845] pci 0000:00:1c.4: bridge window [mem 0xe1500000-0xe15fffff]
[ 0.099933] pci 0000:00:1c.5: PCI bridge to [bus 05]
[ 0.100109] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 10 12 14 15) *11
[ 0.100149] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 *11 12 14 15)
[ 0.100186] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 7 10 12 14 15) *11
[ 0.100222] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 *11 12 14 15)
[ 0.100257] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 10 12 14 15) *11
[ 0.100293] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 *11 12 14 15)
[ 0.100327] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 7 10 12 14 15) *11
[ 0.100362] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 7 *11 12 14 15)
[ 0.100928] ACPI: Enabled 1 GPEs in block 00 to 3F
[ 0.100971] ACPI : EC: GPE = 0x11, I/O: command/status = 0x66, data = 0x62
[ 0.101024] vgaarb: setting as boot device: PCI:0000:00:02.0
[ 0.101026] vgaarb: device added: PCI:0000:00:02.0,decodes=io+mem,owns=io+mem,locks=none
[ 0.101029] vgaarb: loaded
[ 0.101030] vgaarb: bridge control possible 0000:00:02.0
[ 0.101090] SCSI subsystem initialized
[ 0.101109] libata version 3.00 loaded.
[ 0.101121] ACPI: bus type USB registered
[ 0.101146] usbcore: registered new interface driver usbfs
[ 0.101153] usbcore: registered new interface driver hub
[ 0.101172] usbcore: registered new device driver usb
[ 0.101201] pps_core: LinuxPPS API ver. 1 registered
[ 0.101202] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it>
[ 0.101210] PTP clock support registered
[ 0.101277] Advanced Linux Sound Architecture Driver Initialized.
[ 0.101297] PCI: Using ACPI for IRQ routing
[ 0.102742] PCI: pci_cache_line_size set to 64 bytes
[ 0.102862] e820: reserve RAM buffer [mem 0x0009fc00-0x0009ffff]
[ 0.102863] e820: reserve RAM buffer [mem 0xbfe79000-0xbfffffff]
[ 0.102864] e820: reserve RAM buffer [mem 0x436e00000-0x437ffffff]
[ 0.102971] Bluetooth: Core ver 2.20
[ 0.102976] NET: Registered protocol family 31
[ 0.102977] Bluetooth: HCI device and connection manager initialized
[ 0.102980] Bluetooth: HCI socket layer initialized
[ 0.102981] Bluetooth: L2CAP socket layer initialized
[ 0.102983] Bluetooth: SCO socket layer initialized
[ 0.103056] cfg80211: Calling CRDA to update world regulatory domain
[ 0.103132] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0, 0, 0, 0, 0
[ 0.103137] hpet0: 8 comparators, 64-bit 14.318180 MHz counter
[ 0.105167] Switched to clocksource hpet
[ 0.105248] FS-Cache: Loaded
[ 0.106958] pnp: PnP ACPI init
[ 0.107026] system 00:00: [mem 0xfed1c000-0xfed1ffff] has been reserved
[ 0.107028] system 00:00: [mem 0xfed10000-0xfed17fff] has been reserved
[ 0.107029] system 00:00: [mem 0xfed18000-0xfed18fff] has been reserved
[ 0.107031] system 00:00: [mem 0xfed19000-0xfed19fff] has been reserved
[ 0.107033] system 00:00: [mem 0xf0000000-0xf3ffffff] has been reserved
[ 0.107035] system 00:00: [mem 0xfed20000-0xfed3ffff] has been reserved
[ 0.107036] system 00:00: [mem 0xfed40000-0xfed44fff] has been reserved
[ 0.107038] system 00:00: [mem 0xfed45000-0xfed8ffff] has been reserved
[ 0.107040] system 00:00: [mem 0x20000000-0x201fffff] has been reserved
[ 0.107041] system 00:00: [mem 0x40000000-0x401fffff] has been reserved
[ 0.107045] system 00:00: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.107495] system 00:01: [mem 0xfed00000-0xfed003ff] has been reserved
[ 0.107499] system 00:01: Plug and Play ACPI device, IDs PNP0103 PNP0c01 (active)
[ 0.107530] system 00:02: [io 0x0500-0x057f] could not be reserved
[ 0.107532] system 00:02: [io 0x0480-0x04bf] has been reserved
[ 0.107534] system 00:02: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.107554] pnp 00:03: Plug and Play ACPI device, IDs PNP0b00 (active)
[ 0.107585] pnp 00:04: Plug and Play ACPI device, IDs PNP0303 PNP030b (active)
[ 0.107611] pnp 00:05: Plug and Play ACPI device, IDs PNP0f13 (active)
[ 0.107621] pnp: PnP ACPI: found 6 devices
[ 0.112186] clocksource acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns
[ 0.112249] pci 0000:00:1c.0: PCI bridge to [bus 01]
[ 0.112268] pci 0000:00:1c.1: PCI bridge to [bus 02]
[ 0.112275] pci 0000:00:1c.1: bridge window [mem 0xe1400000-0xe14fffff]
[ 0.112286] pci 0000:00:1c.3: PCI bridge to [bus 03]
[ 0.112290] pci 0000:00:1c.3: bridge window [io 0x2000-0x2fff]
[ 0.112296] pci 0000:00:1c.3: bridge window [mem 0xe0800000-0xe0ffffff]
[ 0.112302] pci 0000:00:1c.3: bridge window [mem 0xe0000000-0xe07fffff 64bit pref]
[ 0.112310] pci 0000:00:1c.4: PCI bridge to [bus 04]
[ 0.112317] pci 0000:00:1c.4: bridge window [mem 0xe1500000-0xe15fffff]
[ 0.112329] pci 0000:00:1c.5: PCI bridge to [bus 05]
[ 0.112346] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7 window]
[ 0.112348] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff window]
[ 0.112350] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff window]
[ 0.112351] pci_bus 0000:00: resource 7 [mem 0x000c0000-0x000c3fff window]
[ 0.112353] pci_bus 0000:00: resource 8 [mem 0x000c8000-0x000cbfff window]
[ 0.112354] pci_bus 0000:00: resource 9 [mem 0x000cc000-0x000cffff window]
[ 0.112356] pci_bus 0000:00: resource 10 [mem 0x000d0000-0x000d3fff window]
[ 0.112358] pci_bus 0000:00: resource 11 [mem 0x000d4000-0x000d7fff window]
[ 0.112359] pci_bus 0000:00: resource 12 [mem 0x000d8000-0x000dbfff window]
[ 0.112361] pci_bus 0000:00: resource 13 [mem 0x000dc000-0x000dffff window]
[ 0.112362] pci_bus 0000:00: resource 14 [mem 0x000e0000-0x000e3fff window]
[ 0.112364] pci_bus 0000:00: resource 15 [mem 0x000e4000-0x000e7fff window]
[ 0.112365] pci_bus 0000:00: resource 16 [mem 0x000e8000-0x000ebfff window]
[ 0.112367] pci_bus 0000:00: resource 17 [mem 0x000ec000-0x000effff window]
[ 0.112369] pci_bus 0000:00: resource 18 [mem 0x000f0000-0x000fffff window]
[ 0.112370] pci_bus 0000:00: resource 19 [mem 0xc8a00000-0xefffffff window]
[ 0.112372] pci_bus 0000:00: resource 20 [mem 0xfed40000-0xfed44fff window]
[ 0.112374] pci_bus 0000:02: resource 1 [mem 0xe1400000-0xe14fffff]
[ 0.112375] pci_bus 0000:03: resource 0 [io 0x2000-0x2fff]
[ 0.112377] pci_bus 0000:03: resource 1 [mem 0xe0800000-0xe0ffffff]
[ 0.112378] pci_bus 0000:03: resource 2 [mem 0xe0000000-0xe07fffff 64bit pref]
[ 0.112380] pci_bus 0000:04: resource 1 [mem 0xe1500000-0xe15fffff]
[ 0.112404] NET: Registered protocol family 2
[ 0.112582] TCP established hash table entries: 131072 (order: 8, 1048576 bytes)
[ 0.112825] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
[ 0.112955] TCP: Hash tables configured (established 131072 bind 65536)
[ 0.112993] UDP hash table entries: 8192 (order: 6, 262144 bytes)
[ 0.113052] UDP-Lite hash table entries: 8192 (order: 6, 262144 bytes)
[ 0.113144] NET: Registered protocol family 1
[ 0.113270] RPC: Registered named UNIX socket transport module.
[ 0.113272] RPC: Registered udp transport module.
[ 0.113273] RPC: Registered tcp transport module.
[ 0.113274] RPC: Registered tcp NFSv4.1 backchannel transport module.
[ 0.113285] pci 0000:00:02.0: Video device with shadowed ROM
[ 0.113848] PCI: CLS 64 bytes, default 64
[ 0.113892] Unpacking initramfs...
[ 0.138840] Freeing initrd memory: 1696K (ffff88007fe58000 - ffff880080000000)
[ 0.138849] PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
[ 0.138851] software IO TLB [mem 0xbbe79000-0xbfe79000] (64MB) mapped at [ffff8800bbe79000-ffff8800bfe78fff]
[ 0.139035] RAPL PMU detected, API unit is 2^-32 Joules, 3 fixed counters 163840 ms ovfl timer
[ 0.139037] hw unit of domain pp0-core 2^-16 Joules
[ 0.139038] hw unit of domain package 2^-16 Joules
[ 0.139039] hw unit of domain pp1-gpu 2^-16 Joules
[ 0.139105] microcode: CPU0 sig=0x206a7, pf=0x10, revision=0x29
[ 0.139112] microcode: CPU1 sig=0x206a7, pf=0x10, revision=0x29
[ 0.139119] microcode: CPU2 sig=0x206a7, pf=0x10, revision=0x29
[ 0.139127] microcode: CPU3 sig=0x206a7, pf=0x10, revision=0x29
[ 0.139158] microcode: Microcode Update Driver: v2.00 <tigran@aivazian.fsnet.co.uk>, Peter Oruba
[ 0.139404] Scanning for low memory corruption every 60 seconds
[ 0.139473] AVX version of gcm_enc/dec engaged.
[ 0.139474] AES CTR mode by8 optimization enabled
[ 0.139955] futex hash table entries: 1024 (order: 4, 65536 bytes)
[ 0.139976] audit: initializing netlink subsys (disabled)
[ 0.139986] audit: type=2000 audit(1457475079.134:1): initialized
[ 0.140125] HugeTLB registered 2 MB page size, pre-allocated 0 pages
[ 0.142231] NFS: Registering the id_resolver key type
[ 0.142239] Key type id_resolver registered
[ 0.142240] Key type id_legacy registered
[ 0.142244] nfs4filelayout_init: NFSv4 File Layout Driver Registering...
[ 0.142248] nfs4flexfilelayout_init: NFSv4 Flexfile Layout Driver Registering...
[ 0.142257] ntfs: driver 2.1.32 [Flags: R/W].
[ 0.142333] fuse init (API version 7.23)
[ 0.143184] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 251)
[ 0.143188] io scheduler noop registered
[ 0.143256] io scheduler cfq registered (default)
[ 0.144078] pcieport 0000:00:1c.0: Signaling PME through PCIe PME interrupt
[ 0.144085] pcie_pme 0000:00:1c.0:pcie01: service driver pcie_pme loaded
[ 0.144105] pcieport 0000:00:1c.1: Signaling PME through PCIe PME interrupt
[ 0.144107] pci 0000:02:00.0: Signaling PME through PCIe PME interrupt
[ 0.144112] pcie_pme 0000:00:1c.1:pcie01: service driver pcie_pme loaded
[ 0.144132] pcieport 0000:00:1c.3: Signaling PME through PCIe PME interrupt
[ 0.144137] pcie_pme 0000:00:1c.3:pcie01: service driver pcie_pme loaded
[ 0.144158] pcieport 0000:00:1c.4: Signaling PME through PCIe PME interrupt
[ 0.144160] pci 0000:04:00.0: Signaling PME through PCIe PME interrupt
[ 0.144164] pcie_pme 0000:00:1c.4:pcie01: service driver pcie_pme loaded
[ 0.144184] pcieport 0000:00:1c.5: Signaling PME through PCIe PME interrupt
[ 0.144189] pcie_pme 0000:00:1c.5:pcie01: service driver pcie_pme loaded
[ 0.144197] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[ 0.144246] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
[ 0.144613] Non-volatile memory driver v1.3
[ 0.144664] Linux agpgart interface v0.103
[ 0.144874] ACPI: AC Adapter [AC] (on-line)
[ 0.144923] input: Sleep Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/device:1f/PNP0C09:00/PNP0C0E:00/input/input0
[ 0.144927] ACPI: Sleep Button [SLPB]
[ 0.144961] input: Lid Switch as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/device:1f/PNP0C09:00/PNP0C0D:00/input/input1
[ 0.145098] ACPI: Lid Switch [LID]
[ 0.145131] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input2
[ 0.145133] ACPI: Power Button [PWRF]
[ 0.145248] Monitor-Mwait will be used to enter C-1 state
[ 0.145252] Monitor-Mwait will be used to enter C-2 state
[ 0.145255] Monitor-Mwait will be used to enter C-3 state
[ 0.145263] ACPI: acpi_idle registered with cpuidle
[ 0.146696] thermal LNXTHERM:00: registered as thermal_zone0
[ 0.146698] ACPI: Thermal Zone [THM0] (51 C)
[ 0.147609] thermal LNXTHERM:01: registered as thermal_zone1
[ 0.147611] ACPI: Thermal Zone [THM1] (27 C)
[ 0.147640] [drm] Initialized drm 1.1.0 20060810
[ 0.148189] [drm] Memory usable by graphics device = 2048M
[ 0.148191] [drm] Replacing VGA console driver
[ 0.148902] Console: switching to colour dummy device 80x25
[ 0.160540] ACPI: Battery Slot [BAT0] (battery present)
[ 0.160699] ACPI: Battery Slot [BAT1] (battery absent)
[ 0.202648] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
[ 0.202651] [drm] Driver supports precise vblank timestamp query.
[ 0.202655] [drm] failed to find VBIOS tables
[ 0.202726] vgaarb: device changed decodes: PCI:0000:00:02.0,olddecodes=io+mem,decodes=io+mem:owns=io+mem
[ 0.222041] ACPI: Video Device [GFX0] (multi-head: yes rom: no post: no)
[ 0.222970] acpi device:03: registered as cooling_device4
[ 0.223015] input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:00/input/input3
[ 0.223037] [drm] Initialized i915 1.6.0 20150327 for 0000:00:02.0 on minor 0
[ 0.224109] loop: module loaded
[ 0.224195] ahci 0000:00:1f.2: version 3.0
[ 0.224341] ahci 0000:00:1f.2: SSS flag set, parallel bus scan disabled
[ 0.235371] ahci 0000:00:1f.2: AHCI 0001.0300 32 slots 6 ports 6 Gbps 0x7 impl SATA mode
[ 0.235380] ahci 0000:00:1f.2: flags: 64bit ncq sntf ilck stag pm led clo pio slum part apst
[ 0.235943] scsi host0: ahci
[ 0.236034] scsi host1: ahci
[ 0.236118] scsi host2: ahci
[ 0.236201] scsi host3: ahci
[ 0.236281] scsi host4: ahci
[ 0.236376] scsi host5: ahci
[ 0.236434] ata1: SATA max UDMA/133 abar m2048@0xe162d000 port 0xe162d100 irq 30
[ 0.236437] ata2: SATA max UDMA/133 abar m2048@0xe162d000 port 0xe162d180 irq 30
[ 0.236440] ata3: SATA max UDMA/133 abar m2048@0xe162d000 port 0xe162d200 irq 30
[ 0.236442] ata4: DUMMY
[ 0.236442] ata5: DUMMY
[ 0.236443] ata6: DUMMY
[ 0.236467] tun: Universal TUN/TAP device driver, 1.6
[ 0.236468] tun: (C) 1999-2004 Max Krasnyansky <maxk@qualcomm.com>
[ 0.236511] e1000e: Intel(R) PRO/1000 Network Driver - 2.3.2-k
[ 0.236512] e1000e: Copyright(c) 1999 - 2014 Intel Corporation.
[ 0.236572] e1000e 0000:00:19.0: Interrupt Throttling Rate (ints/sec) set to dynamic conservative mode
[ 0.276651] fbcon: inteldrmfb (fb0) is primary device
[ 0.493305] e1000e 0000:00:19.0 eth0: registered PHC clock
[ 0.493307] e1000e 0000:00:19.0 eth0: (PCI Express:2.5GT/s:Width x1) f0:de:f1:6e:50:f4
[ 0.493309] e1000e 0000:00:19.0 eth0: Intel(R) PRO/1000 Network Connection
[ 0.493342] e1000e 0000:00:19.0 eth0: MAC: 10, PHY: 11, PBA No: 1000FF-0FF
[ 0.493362] Intel(R) Wireless WiFi driver for Linux
[ 0.493362] Copyright(c) 2003- 2015 Intel Corporation
[ 0.494063] iwlwifi 0000:02:00.0: loaded firmware version 18.168.6.1 op_mode iwldvm
[ 0.494094] iwlwifi 0000:02:00.0: CONFIG_IWLWIFI_DEBUG disabled
[ 0.494095] iwlwifi 0000:02:00.0: CONFIG_IWLWIFI_DEBUGFS disabled
[ 0.494096] iwlwifi 0000:02:00.0: CONFIG_IWLWIFI_DEVICE_TRACING disabled
[ 0.494098] iwlwifi 0000:02:00.0: Detected Intel(R) Centrino(R) Advanced-N 6205 AGN, REV=0xB0
[ 0.494163] iwlwifi 0000:02:00.0: L1 Disabled - LTR Disabled
[ 0.512086] ieee80211 phy0: Selected rate control algorithm 'iwl-agn-rs'
[ 0.512292] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 0.512294] ehci-pci: EHCI PCI platform driver
[ 0.512399] ehci-pci 0000:00:1a.0: EHCI Host Controller
[ 0.512433] ehci-pci 0000:00:1a.0: new USB bus registered, assigned bus number 1
[ 0.512445] ehci-pci 0000:00:1a.0: debug port 2
[ 0.516348] ehci-pci 0000:00:1a.0: cache line size of 64 is not supported
[ 0.516362] ehci-pci 0000:00:1a.0: irq 21, io mem 0xe162e000
[ 0.521724] ehci-pci 0000:00:1a.0: USB 2.0 started, EHCI 1.00
[ 0.521806] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
[ 0.521807] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 0.521808] usb usb1: Product: EHCI Host Controller
[ 0.521809] usb usb1: Manufacturer: Linux 4.1.15-gentoo-r1 ehci_hcd
[ 0.521810] usb usb1: SerialNumber: 0000:00:1a.0
[ 0.521919] hub 1-0:1.0: USB hub found
[ 0.521923] hub 1-0:1.0: 3 ports detected
[ 0.522117] ehci-pci 0000:00:1d.0: EHCI Host Controller
[ 0.522157] ehci-pci 0000:00:1d.0: new USB bus registered, assigned bus number 2
[ 0.522167] ehci-pci 0000:00:1d.0: debug port 2
[ 0.526062] ehci-pci 0000:00:1d.0: cache line size of 64 is not supported
[ 0.526073] ehci-pci 0000:00:1d.0: irq 19, io mem 0xe162f000
[ 0.531690] ehci-pci 0000:00:1d.0: USB 2.0 started, EHCI 1.00
[ 0.531744] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002
[ 0.531748] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 0.531751] usb usb2: Product: EHCI Host Controller
[ 0.531754] usb usb2: Manufacturer: Linux 4.1.15-gentoo-r1 ehci_hcd
[ 0.531756] usb usb2: SerialNumber: 0000:00:1d.0
[ 0.531871] hub 2-0:1.0: USB hub found
[ 0.531875] hub 2-0:1.0: 3 ports detected
[ 0.531989] usbcore: registered new interface driver uas
[ 0.532002] usbcore: registered new interface driver usb-storage
[ 0.532026] usbcore: registered new interface driver usbserial
[ 0.532035] usbcore: registered new interface driver cp210x
[ 0.532044] usbserial: USB Serial support registered for cp210x
[ 0.532059] usbcore: registered new interface driver pl2303
[ 0.532070] usbserial: USB Serial support registered for pl2303
[ 0.532117] i8042: PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at 0x60,0x64 irq 1,12
[ 0.537155] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 0.537183] serio: i8042 AUX port at 0x60,0x64 irq 12
[ 0.537257] mousedev: PS/2 mouse device common for all mice
[ 0.537502] usbcore: registered new interface driver synaptics_usb
[ 0.537550] rtc_cmos 00:03: RTC can wake from S4
[ 0.537683] rtc_cmos 00:03: rtc core: registered rtc_cmos as rtc0
[ 0.537714] rtc_cmos 00:03: alarms up to one month, 242 bytes nvram, hpet irqs
[ 0.537849] i801_smbus 0000:00:1f.3: SMBus using PCI interrupt
[ 0.538024] device-mapper: uevent: version 1.0.3
[ 0.538091] device-mapper: ioctl: 4.31.0-ioctl (2015-3-12) initialised: dm-devel@redhat.com
[ 0.538112] usbcore: registered new interface driver btusb
[ 0.538123] Intel P-state driver initializing.
[ 0.538335] sdhci: Secure Digital Host Controller Interface driver
[ 0.538336] sdhci: Copyright(c) Pierre Ossman
[ 0.538370] sdhci-pci 0000:04:00.0: SDHCI controller found [1180:e822] (rev 7)
[ 0.539037] sdhci-pci 0000:04:00.0: No vmmc regulator found
[ 0.539040] sdhci-pci 0000:04:00.0: No vqmmc regulator found
[ 0.540691] mmc0: SDHCI controller on PCI [0000:04:00.0] using DMA
[ 0.540737] sdhci-pltfm: SDHCI platform and OF driver helper
[ 0.541116] hidraw: raw HID events driver (C) Jiri Kosina
[ 0.541253] usbcore: registered new interface driver usbhid
[ 0.541254] usbhid: USB HID core driver
[ 0.541585] thinkpad_acpi: ThinkPad ACPI Extras v0.25
[ 0.541587] thinkpad_acpi: http://ibm-acpi.sf.net/
[ 0.541590] thinkpad_acpi: ThinkPad BIOS CBET4000 4.3-377-gbe63a24, EC 8DHT34WW-3.20
[ 0.541604] thinkpad_acpi: Lenovo ThinkPad X220, model 4291B24
[ 0.541795] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input4
[ 0.542192] thinkpad_acpi: detected a 8-level brightness capable ThinkPad
[ 0.542290] thinkpad_acpi: This ThinkPad has standard ACPI backlight brightness control, supported by the ACPI video driver
[ 0.542291] thinkpad_acpi: Disabling thinkpad-acpi brightness events by default...
[ 0.543717] ata1: SATA link down (SStatus 0 SControl 300)
[ 0.546187] thinkpad_acpi: Standard ACPI backlight interface available, not loading native one
[ 0.546397] thinkpad_acpi: Console audio control enabled, mode: monitor (read only)
[ 0.548285] input: ThinkPad Extra Buttons as /devices/platform/thinkpad_acpi/input/input5
[ 0.548433] hdaps: supported laptop not found!
[ 0.548435] hdaps: driver init failed (ret=-19)!
[ 0.549637] usbcore: registered new interface driver snd-usb-audio
[ 0.549662] Netfilter messages via NETLINK v0.30.
[ 0.549706] nf_conntrack version 0.5.0 (65536 buckets, 262144 max)
[ 0.550130] ctnetlink v0.93: registering with nfnetlink.
[ 0.550942] ip_tables: (C) 2000-2006 Netfilter Core Team
[ 0.551103] Initializing XFRM netlink socket
[ 0.551376] NET: Registered protocol family 10
[ 0.551909] ip6_tables: (C) 2000-2006 Netfilter Core Team
[ 0.553897] sit: IPv6 over IPv4 tunneling driver
[ 0.554207] NET: Registered protocol family 17
[ 0.554220] Bluetooth: HIDP (Human Interface Emulation) ver 1.2
[ 0.554223] Bluetooth: HIDP socket layer initialized
[ 0.554258] Key type dns_resolver registered
[ 0.556093] registered taskstats version 1
[ 0.556652] Magic number: 8:532:198
[ 0.556893] PM: Hibernation image not present or could not be loaded.
[ 0.556896] ALSA device list:
[ 0.556899] #5: ThinkPad Console Audio Control at EC reg 0x30, fw 8DHT34WW-3.20
[ 0.559120] snd_hda_codec_generic hdaudioC0D0: autoconfig for ID 506e: line_outs=1 (0x1f/0x0/0x0/0x0/0x0) type:speaker
[ 0.559123] snd_hda_codec_generic hdaudioC0D0: speaker_outs=0 (0x0/0x0/0x0/0x0/0x0)
[ 0.559126] snd_hda_codec_generic hdaudioC0D0: hp_outs=1 (0x19/0x0/0x0/0x0/0x0)
[ 0.559128] snd_hda_codec_generic hdaudioC0D0: mono: mono_out=0x0
[ 0.559130] snd_hda_codec_generic hdaudioC0D0: inputs:
[ 0.559134] snd_hda_codec_generic hdaudioC0D0: Internal Mic=0x23
[ 0.559137] snd_hda_codec_generic hdaudioC0D0: Mic=0x1b
[ 0.563371] snd_hda_codec_generic hdaudioC0D3: ignore pin 0x7, too many assigned pins
[ 0.563376] snd_hda_codec_generic hdaudioC0D3: autoconfig for ID 2805: line_outs=0 (0x0/0x0/0x0/0x0/0x0) type:line
[ 0.563379] snd_hda_codec_generic hdaudioC0D3: speaker_outs=0 (0x0/0x0/0x0/0x0/0x0)
[ 0.563382] snd_hda_codec_generic hdaudioC0D3: hp_outs=0 (0x0/0x0/0x0/0x0/0x0)
[ 0.563384] snd_hda_codec_generic hdaudioC0D3: mono: mono_out=0x0
[ 0.563386] snd_hda_codec_generic hdaudioC0D3: dig-out=0x5/0x6
[ 0.563388] snd_hda_codec_generic hdaudioC0D3: inputs:
[ 0.824115] usb 1-1: new high-speed USB device number 2 using ehci-pci
[ 0.834109] usb 2-1: new high-speed USB device number 2 using ehci-pci
[ 0.938614] usb 1-1: New USB device found, idVendor=8087, idProduct=0024
[ 0.938618] usb 1-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[ 0.939113] hub 1-1:1.0: USB hub found
[ 0.939286] hub 1-1:1.0: 6 ports detected
[ 0.948888] usb 2-1: New USB device found, idVendor=8087, idProduct=0024
[ 0.948892] usb 2-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[ 0.949305] hub 2-1:1.0: USB hub found
[ 0.949403] hub 2-1:1.0: 8 ports detected
[ 0.962613] Console: switching to colour frame buffer device 170x48
[ 0.966711] i915 0000:00:02.0: fb0: inteldrmfb frame buffer device
[ 0.966714] i915 0000:00:02.0: registered panic notifier
[ 1.139462] tsc: Refined TSC clocksource calibration: 2494.337 MHz
[ 1.139473] clocksource tsc: mask: 0xffffffffffffffff max_cycles: 0x23f4544ecb4, max_idle_ns: 440795257849 ns
[ 1.215569] usb 1-1.2: new low-speed USB device number 3 using ehci-pci
[ 1.225547] usb 2-1.1: new low-speed USB device number 3 using ehci-pci
[ 1.273624] ata2: SATA link down (SStatus 0 SControl 300)
[ 1.295570] usb 1-1.2: New USB device found, idVendor=046d, idProduct=c05b
[ 1.295578] usb 1-1.2: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[ 1.295584] usb 1-1.2: Product: USB Optical Mouse
[ 1.295588] usb 1-1.2: Manufacturer: Logitech
[ 1.298935] input: Logitech USB Optical Mouse as /devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.2/1-1.2:1.0/0003:046D:C05B.0001/input/input8
[ 1.299244] hid-generic 0003:046D:C05B.0001: input,hidraw0: USB HID v1.11 Mouse [Logitech USB Optical Mouse] on usb-0000:00:1a.0-1.2/input0
[ 1.325401] usb 2-1.1: New USB device found, idVendor=046a, idProduct=0011
[ 1.325410] usb 2-1.1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[ 1.336172] input: HID 046a:0011 as /devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.1/2-1.1:1.0/0003:046A:0011.0002/input/input9
[ 1.372757] usb 1-1.6: new high-speed USB device number 4 using ehci-pci
[ 1.387064] hid-generic 0003:046A:0011.0002: input,hidraw1: USB HID v1.11 Keyboard [HID 046a:0011] on usb-0000:00:1d.0-1.1/input0
[ 1.413254] psmouse serio1: trackpoint: IBM TrackPoint firmware: 0x0e, buttons: 3/3
[ 1.434969] input: TPPS/2 IBM TrackPoint as /devices/platform/i8042/serio1/input/input7
[ 1.459795] usb 2-1.2: new full-speed USB device number 4 using ehci-pci
[ 1.465024] usb 1-1.6: New USB device found, idVendor=04f2, idProduct=b217
[ 1.465033] usb 1-1.6: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[ 1.465038] usb 1-1.6: Product: Integrated Camera
[ 1.465042] usb 1-1.6: Manufacturer: Chicony Electronics Co., Ltd.
[ 1.549053] usb 2-1.2: New USB device found, idVendor=046d, idProduct=c534
[ 1.549063] usb 2-1.2: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[ 1.549067] usb 2-1.2: Product: USB Receiver
[ 1.549071] usb 2-1.2: Manufacturer: Logitech
[ 1.551761] input: Logitech USB Receiver as /devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.2/2-1.2:1.0/0003:046D:C534.0003/input/input10
[ 1.580979] ata3: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[ 1.583064] ata3.00: supports DRM functions and may not be fully accessible
[ 1.583152] ata3.00: READ LOG DMA EXT failed, trying unqueued
[ 1.583197] ata3.00: failed to get NCQ Send/Recv Log Emask 0x1
[ 1.583202] ata3.00: ATA-9: Samsung SSD 840 EVO 120GB mSATA, EXT42B6Q, max UDMA/133
[ 1.583207] ata3.00: 234441648 sectors, multi 1: LBA48 NCQ (depth 31/32), AA
[ 1.583595] ata3.00: supports DRM functions and may not be fully accessible
[ 1.583672] ata3.00: failed to get NCQ Send/Recv Log Emask 0x1
[ 1.583732] ata3.00: configured for UDMA/133
[ 1.584149] scsi 2:0:0:0: Direct-Access ATA Samsung SSD 840 2B6Q PQ: 0 ANSI: 5
[ 1.584782] sd 2:0:0:0: [sda] 234441648 512-byte logical blocks: (120 GB/111 GiB)
[ 1.584849] sd 2:0:0:0: Attached scsi generic sg0 type 0
[ 1.585046] sd 2:0:0:0: [sda] Write Protect is off
[ 1.585058] sd 2:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 1.585134] sd 2:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 1.585923] sda: sda1 sda2 sda3 sda4
[ 1.586765] sd 2:0:0:0: [sda] Attached SCSI disk
[ 1.587175] Freeing unused kernel memory: 892K (ffffffff81c3a000 - ffffffff81d19000)
[ 1.602275] hid-generic 0003:046D:C534.0003: input,hidraw2: USB HID v1.11 Keyboard [Logitech USB Receiver] on usb-0000:00:1d.0-1.2/input0
[ 1.605677] input: Logitech USB Receiver as /devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.2/2-1.2:1.1/0003:046D:C534.0004/input/input11
[ 1.656647] hid-generic 0003:046D:C534.0004: input,hiddev0,hidraw3: USB HID v1.11 Mouse [Logitech USB Receiver] on usb-0000:00:1d.0-1.2/input1
[ 2.140913] Switched to clocksource tsc
[ 3.247869] cfg80211: Calling CRDA to update world regulatory domain
[ 5.342289] random: nonblocking pool is initialized
[ 6.393473] cfg80211: Calling CRDA to update world regulatory domain
[ 9.538963] cfg80211: Calling CRDA to update world regulatory domain
[ 12.684573] cfg80211: Calling CRDA to update world regulatory domain
[ 13.356943] EXT4-fs (dm-1): mounted filesystem with ordered data mode. Opts: (null)
[ 13.887754] udevd[1540]: starting version 3.1.5
[ 14.603734] EXT4-fs (dm-1): re-mounted. Opts: (null)
[ 14.681364] Adding 17037308k swap on /dev/mapper/swap. Priority:-1 extents:1 across:17037308k SS
[ 14.712286] EXT4-fs (sda1): mounting ext2 file system using the ext4 subsystem
[ 14.713399] EXT4-fs (sda1): mounted filesystem without journal. Opts: (null)
[ 14.714941] EXT4-fs (dm-2): mounted filesystem with ordered data mode. Opts: (null)
[ 15.830189] cfg80211: Calling CRDA to update world regulatory domain
[ 15.839747] cfg80211: World regulatory domain updated:
[ 15.839754] cfg80211: DFS Master region: unset
[ 15.839757] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp), (dfs_cac_time)
[ 15.839761] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (N/A, 2000 mBm), (N/A)
[ 15.839766] cfg80211: (2457000 KHz - 2482000 KHz @ 20000 KHz, 92000 KHz AUTO), (N/A, 2000 mBm), (N/A)
[ 15.839769] cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (N/A, 2000 mBm), (N/A)
[ 15.839772] cfg80211: (5170000 KHz - 5250000 KHz @ 80000 KHz, 160000 KHz AUTO), (N/A, 2000 mBm), (N/A)
[ 15.839776] cfg80211: (5250000 KHz - 5330000 KHz @ 80000 KHz, 160000 KHz AUTO), (N/A, 2000 mBm), (0 s)
[ 15.839779] cfg80211: (5490000 KHz - 5730000 KHz @ 160000 KHz), (N/A, 2000 mBm), (0 s)
[ 15.839782] cfg80211: (5735000 KHz - 5835000 KHz @ 80000 KHz), (N/A, 2000 mBm), (N/A)
[ 15.839786] cfg80211: (57240000 KHz - 63720000 KHz @ 2160000 KHz), (N/A, 0 mBm), (N/A)
[ 15.960394] iwlwifi 0000:02:00.0: L1 Disabled - LTR Disabled
[ 15.966975] iwlwifi 0000:02:00.0: Radio type=0x1-0x2-0x0
[ 16.231882] iwlwifi 0000:02:00.0: L1 Disabled - LTR Disabled
[ 16.238478] iwlwifi 0000:02:00.0: Radio type=0x1-0x2-0x0
[ 16.316439] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
[ 20.266371] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 23.129587] e1000e: eth0 NIC Link is Up 1000 Mbps Full Duplex, Flow Control: Rx/Tx
[ 23.129634] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
[ 190.935967] iwlwifi 0000:02:00.0: L1 Disabled - LTR Disabled
[ 190.942567] iwlwifi 0000:02:00.0: Radio type=0x1-0x2-0x0
[ 191.209337] iwlwifi 0000:02:00.0: L1 Disabled - LTR Disabled
[ 191.215938] iwlwifi 0000:02:00.0: Radio type=0x1-0x2-0x0
[ 191.291143] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
[ 191.461624] e1000e: eth0 NIC Link is Down
[ 191.709562] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 191.746539] iwlwifi 0000:02:00.0: L1 Disabled - LTR Disabled
[ 191.753148] iwlwifi 0000:02:00.0: Radio type=0x1-0x2-0x0
[ 192.019603] iwlwifi 0000:02:00.0: L1 Disabled - LTR Disabled
[ 192.026197] iwlwifi 0000:02:00.0: Radio type=0x1-0x2-0x0
[ 192.102971] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
[ 195.303579] e1000e: eth0 NIC Link is Up 1000 Mbps Full Duplex, Flow Control: Rx/Tx
[ 195.303626] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
[ 197.308010] wlan0: authenticate with f8:1a:67:d8:db:d0
[ 197.310793] wlan0: send auth to f8:1a:67:d8:db:d0 (try 1/3)
[ 197.387868] wlan0: authenticated
[ 197.388954] wlan0: associate with f8:1a:67:d8:db:d0 (try 1/3)
[ 197.390417] wlan0: RX AssocResp from f8:1a:67:d8:db:d0 (capab=0x11 status=0 aid=1)
[ 197.408108] wlan0: associated
[ 197.408157] IPv6: ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
[ 197.408215] cfg80211: Calling CRDA for country: DE
[ 197.412399] cfg80211: Regulatory domain changed to country: DE
[ 197.412406] cfg80211: DFS Master region: unset
[ 197.412409] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp), (dfs_cac_time)
[ 197.412414] cfg80211: (2400000 KHz - 2483500 KHz @ 40000 KHz), (N/A, 2000 mBm), (N/A)
[ 197.412419] cfg80211: (5150000 KHz - 5250000 KHz @ 80000 KHz, 200000 KHz AUTO), (N/A, 2000 mBm), (N/A)
[ 197.412424] cfg80211: (5250000 KHz - 5350000 KHz @ 80000 KHz, 200000 KHz AUTO), (N/A, 2000 mBm), (0 s)
[ 197.412428] cfg80211: (5470000 KHz - 5725000 KHz @ 160000 KHz), (N/A, 2698 mBm), (0 s)
[ 197.412432] cfg80211: (57000000 KHz - 66000000 KHz @ 2160000 KHz), (N/A, 4000 mBm), (N/A)