blob: 14eedabc00b0c661e309d69e07ceae9191d4e2c8 [file] [log] [blame]
[ 0.000000] Initializing cgroup subsys cpuset
[ 0.000000] Initializing cgroup subsys cpu
[ 0.000000] Initializing cgroup subsys cpuacct
[ 0.000000] Linux version 3.13.5-gnu-stolenmem-owen (sam@judas) (gcc version 4.8.2 (Debian 4.8.2-15) ) #6 SMP PREEMPT Wed Feb 26 21:20:02 MST 2014
[ 0.000000] Disabled fast string operations
[ 0.000000] e820: BIOS-provided physical RAM map:
[ 0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009fbff] usable
[ 0.000000] BIOS-e820: [mem 0x000000000009fc00-0x000000000009ffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000000f0000-0x00000000000fffff] reserved
[ 0.000000] BIOS-e820: [mem 0x0000000000100000-0x00000000bf6bffff] usable
[ 0.000000] BIOS-e820: [mem 0x00000000bf6c0000-0x00000000bfffffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000f0000000-0x00000000f3ffffff] reserved
[ 0.000000] Notice: NX (Execute Disable) protection cannot be enabled: non-PAE kernel!
[ 0.000000] SMBIOS 2.7 present.
[ 0.000000] DMI: LENOVO 1952AD8, BIOS t60 03/04/2014
[ 0.000000] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
[ 0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable
[ 0.000000] e820: last_pfn = 0xbf6c0 max_arch_pfn = 0x100000
[ 0.000000] MTRR default type: uncachable
[ 0.000000] MTRR fixed ranges enabled:
[ 0.000000] 00000-9FFFF write-back
[ 0.000000] A0000-BFFFF uncachable
[ 0.000000] C0000-FFFFF write-back
[ 0.000000] MTRR variable ranges enabled:
[ 0.000000] 0 base 000000000 mask 080000000 write-back
[ 0.000000] 1 base 080000000 mask 0C0000000 write-back
[ 0.000000] 2 base 0BF800000 mask 0FF800000 uncachable
[ 0.000000] 3 base 0D0000000 mask 0F0000000 write-combining
[ 0.000000] 4 disabled
[ 0.000000] 5 disabled
[ 0.000000] 6 disabled
[ 0.000000] 7 disabled
[ 0.000000] PAT not supported by CPU.
[ 0.000000] found SMP MP-table at [mem 0x000fda30-0x000fda3f] mapped at [c00fda30]
[ 0.000000] initial memory mapped: [mem 0x00000000-0x01bfffff]
[ 0.000000] Base memory trampoline at [c009b000] 9b000 size 16384
[ 0.000000] init_memory_mapping: [mem 0x00000000-0x000fffff]
[ 0.000000] [mem 0x00000000-0x000fffff] page 4k
[ 0.000000] init_memory_mapping: [mem 0x37000000-0x373fffff]
[ 0.000000] [mem 0x37000000-0x373fffff] page 2M
[ 0.000000] init_memory_mapping: [mem 0x30000000-0x36ffffff]
[ 0.000000] [mem 0x30000000-0x36ffffff] page 2M
[ 0.000000] init_memory_mapping: [mem 0x00100000-0x2fffffff]
[ 0.000000] [mem 0x00100000-0x003fffff] page 4k
[ 0.000000] [mem 0x00400000-0x2fffffff] page 2M
[ 0.000000] init_memory_mapping: [mem 0x37400000-0x377fdfff]
[ 0.000000] [mem 0x37400000-0x377fdfff] page 4k
[ 0.000000] BRK [0x017b6000, 0x017b6fff] PGTABLE
[ 0.000000] RAMDISK: [mem 0x375d0000-0x37adffff]
[ 0.000000] Allocated new RAMDISK: [mem 0x370c0000-0x375cfaa6]
[ 0.000000] Move RAMDISK from [mem 0x375d0000-0x37adfaa6] to [mem 0x370c0000-0x375cfaa6]
[ 0.000000] ACPI: RSDP 000fda00 000024 (v02 CORE )
[ 0.000000] ACPI: XSDT bf6e2ae0 00004C (v01 CORE COREBOOT 00000000 CORE 00000000)
[ 0.000000] ACPI: HPET bf6e2c10 000038 (v01 CORE COREBOOT 00000000 CORE 00000000)
[ 0.000000] ACPI: APIC bf6e2c50 000068 (v01 CORE COREBOOT 00000000 CORE 00000000)
[ 0.000000] ACPI: MCFG bf6e2cc0 00003C (v01 CORE COREBOOT 00000000 CORE 00000000)
[ 0.000000] ACPI: FACP bf6e5f70 0000F4 (v03 CORE COREBOOT 00000000 CORE 00000000)
[ 0.000000] ACPI: DSDT bf6e2d40 003123 (v03 COREv4 COREBOOT 20090419 INTL 20100528)
[ 0.000000] ACPI: FACS bf6e2d00 000040
[ 0.000000] ACPI: SSDT bf6e6070 000340 (v02 CORE COREBOOT 0000002A CORE 0000002A)
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] 2174MB HIGHMEM available.
[ 0.000000] 887MB LOWMEM available.
[ 0.000000] mapped low ram: 0 - 377fe000
[ 0.000000] low ram: 0 - 377fe000
[ 0.000000] BRK [0x017b7000, 0x017b7fff] PGTABLE
[ 0.000000] Zone ranges:
[ 0.000000] DMA [mem 0x00001000-0x00ffffff]
[ 0.000000] Normal [mem 0x01000000-0x377fdfff]
[ 0.000000] HighMem [mem 0x377fe000-0xbf6bffff]
[ 0.000000] Movable zone start for each node
[ 0.000000] Early memory node ranges
[ 0.000000] node 0: [mem 0x00001000-0x0009efff]
[ 0.000000] node 0: [mem 0x00100000-0xbf6bffff]
[ 0.000000] On node 0 totalpages: 783966
[ 0.000000] DMA zone: 32 pages used for memmap
[ 0.000000] DMA zone: 0 pages reserved
[ 0.000000] DMA zone: 3998 pages, LIFO batch:0
[ 0.000000] Normal zone: 1744 pages used for memmap
[ 0.000000] Normal zone: 223230 pages, LIFO batch:31
[ 0.000000] HighMem zone: 4350 pages used for memmap
[ 0.000000] HighMem zone: 556738 pages, LIFO batch:31
[ 0.000000] Using APIC driver default
[ 0.000000] ACPI: PM-Timer IO Port: 0x508
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled)
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
[ 0.000000] ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
[ 0.000000] IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-23
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 high edge)
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[ 0.000000] ACPI: IRQ0 used by override.
[ 0.000000] ACPI: IRQ2 used by override.
[ 0.000000] ACPI: IRQ9 used by override.
[ 0.000000] Using ACPI (MADT) for SMP configuration information
[ 0.000000] ACPI: HPET id: 0x8086a201 base: 0xfed00000
[ 0.000000] smpboot: Allowing 2 CPUs, 0 hotplug CPUs
[ 0.000000] nr_irqs_gsi: 40
[ 0.000000] PM: Registered nosave memory: [mem 0x0009f000-0x0009ffff]
[ 0.000000] PM: Registered nosave memory: [mem 0x000a0000-0x000effff]
[ 0.000000] PM: Registered nosave memory: [mem 0x000f0000-0x000fffff]
[ 0.000000] e820: [mem 0xc0000000-0xefffffff] available for PCI devices
[ 0.000000] setup_percpu: NR_CPUS:2 nr_cpumask_bits:2 nr_cpu_ids:2 nr_node_ids:1
[ 0.000000] PERCPU: Embedded 13 pages/cpu @f75d2000 s31232 r0 d22016 u53248
[ 0.000000] pcpu-alloc: s31232 r0 d22016 u53248 alloc=13*4096
[ 0.000000] pcpu-alloc: [0] 0 [0] 1
[ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 782190
[ 0.000000] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-3.13.5-gnu-stolenmem-owen root=UUID=c96aee44-d452-4635-98bb-e00699933cd0 ro console=tty0 console=ttyS0,115200n processor.max_cstate=2
[ 0.000000] PID hash table entries: 4096 (order: 2, 16384 bytes)
[ 0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
[ 0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
[ 0.000000] Initializing CPU#0
[ 0.000000] Initializing HighMem for node 0 (000377fe:000bf6c0)
[ 0.000000] Memory: 3097156K/3135864K available (4060K kernel code, 321K rwdata, 1540K rodata, 468K init, 1452K bss, 38708K reserved, 2226952K highmem)
[ 0.000000] virtual kernel memory layout:
[ 0.000000] fixmap : 0xfff8e000 - 0xfffff000 ( 452 kB)
[ 0.000000] pkmap : 0xff800000 - 0xffc00000 (4096 kB)
[ 0.000000] vmalloc : 0xf7ffe000 - 0xff7fe000 ( 120 MB)
[ 0.000000] lowmem : 0xc0000000 - 0xf77fe000 ( 887 MB)
[ 0.000000] .init : 0xc15cb000 - 0xc1640000 ( 468 kB)
[ 0.000000] .data : 0xc13f7343 - 0xc15ca6c0 (1868 kB)
[ 0.000000] .text : 0xc1000000 - 0xc13f7343 (4060 kB)
[ 0.000000] Checking if this processor honours the WP bit even in supervisor mode...Ok.
[ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=2, Nodes=1
[ 0.000000] Preemptible hierarchical RCU implementation.
[ 0.000000] NR_IRQS:2304 nr_irqs:512 16
[ 0.000000] CPU 0 irqstacks, hard=f5408000 soft=f540a000
[ 0.000000] Console: colour VGA+ 80x25
[ 0.000000] console [tty0] enabled
[ 0.000000] console [ttyS0] enabled
[ 0.000000] allocated 6291456 bytes of page_cgroup
[ 0.000000] please try 'cgroup_disable=memory' option if you don't want memory cgroups
[ 0.000000] hpet clockevent registered
[ 0.000000] tsc: Fast TSC calibration using PIT
[ 0.000000] tsc: Detected 1995.139 MHz processor
[ 0.001002] Calibrating delay loop (skipped), value calculated using timer frequency.. 3990.27 BogoMIPS (lpj=1995139)
[ 0.002006] pid_max: default: 32768 minimum: 301
[ 0.002337] Security Framework initialized
[ 0.002603] SELinux: Disabled at boot.
[ 0.002859] Mount-cache hash table entries: 512
[ 0.003293] Initializing cgroup subsys memory
[ 0.003574] Initializing cgroup subsys devices
[ 0.004006] Initializing cgroup subsys freezer
[ 0.004285] Initializing cgroup subsys net_cls
[ 0.004565] Initializing cgroup subsys blkio
[ 0.004835] Initializing cgroup subsys perf_event
[ 0.005033] Disabled fast string operations
[ 0.005303] CPU: Physical Processor ID: 0
[ 0.005560] CPU: Processor Core ID: 0
[ 0.006005] mce: CPU supports 6 MCE banks
[ 0.006271] CPU0: Thermal monitoring enabled (TM2)
[ 0.006582] Last level iTLB entries: 4KB 128, 2MB 0, 4MB 2
[ 0.006582] Last level dTLB entries: 4KB 128, 2MB 0, 4MB 8
[ 0.006582] tlb_flushall_shift: 6
[ 0.007097] Freeing SMP alternatives memory: 12K (c1640000 - c1643000)
[ 0.007478] ACPI: Core revision 20131115
[ 0.010723] ACPI: All ACPI Tables successfully acquired
[ 0.011892] Enabling APIC mode: Flat. Using 1 I/O APICs
[ 0.012401] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[ 0.023086] smpboot: CPU0: Intel(R) Core(TM) Duo CPU T2500 @ 2.00GHz (fam: 06, model: 0e, stepping: 0c)
[ 0.024000] Performance Events: Core events, core PMU driver.
[ 0.024000] ... version: 1
[ 0.024000] ... bit width: 40
[ 0.024000] ... generic registers: 2
[ 0.024002] ... value mask: 000000ffffffffff
[ 0.024322] ... max period: 000000007fffffff
[ 0.024642] ... fixed-purpose events: 0
[ 0.025002] ... event mask: 0000000000000003
[ 0.031080] CPU 1 irqstacks, hard=f4ea8000 soft=f4eaa000
[ 0.031083] x86: Booting SMP configuration:
[ 0.002000] Initializing CPU#1
[ 0.002000] Disabled fast string operations
[ 0.031350] .... node #0, CPUs: #1
[ 0.044075] x86: Booted up 1 node, 2 CPUs
[ 0.044408] smpboot: Total of 2 processors activated (7980.55 BogoMIPS)
[ 0.046066] devtmpfs: initialized
[ 0.047085] regulator-dummy: no parameters
[ 0.047420] NET: Registered protocol family 16
[ 0.047850] cpuidle: using governor ladder
[ 0.048003] cpuidle: using governor menu
[ 0.048323] ACPI: bus type PCI registered
[ 0.048626] PCI: MMCONFIG for domain 0000 [bus 00-3f] at [mem 0xf0000000-0xf3ffffff] (base 0xf0000000)
[ 0.049004] PCI: MMCONFIG at [mem 0xf0000000-0xf3ffffff] reserved in E820
[ 0.049395] PCI: Using MMCONFIG for extended config space
[ 0.049719] PCI: Using configuration type 1 for base access
[ 0.051499] bio: create slab <bio-0> at 0
[ 0.051499] ACPI: Added _OSI(Module Device)
[ 0.052003] ACPI: Added _OSI(Processor Device)
[ 0.052281] ACPI: Added _OSI(3.0 _SCP Extensions)
[ 0.052573] ACPI: Added _OSI(Processor Aggregator Device)
[ 0.056335] [Firmware Bug]: ACPI: BIOS _OSI(Linux) query ignored
[ 0.057086] ACPI: Interpreter enabled
[ 0.057335] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S1_] (20131115/hwxface-580)
[ 0.057960] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S2_] (20131115/hwxface-580)
[ 0.058400] ACPI: (supports S0 S3 S4 S5)
[ 0.058653] ACPI: Using IOAPIC for interrupt routing
[ 0.059028] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
[ 0.059796] ACPI: ACPI Dock Station Driver: 1 docks/bays found
[ 0.067838] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
[ 0.068008] acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI]
[ 0.068574] acpi PNP0A08:00: _OSC: OS now controls [PCIeHotplug PME AER PCIeCapability]
[ 0.069115] acpi PNP0A08:00: [Firmware Info]: MMCONFIG for domain 0000 [bus 00-3f] only partially covers this bridge
[ 0.069728] PCI host bridge to bus 0000:00
[ 0.070004] pci_bus 0000:00: root bus resource [bus 00-ff]
[ 0.070335] pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7]
[ 0.070698] pci_bus 0000:00: root bus resource [io 0x0d00-0xffff]
[ 0.071003] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff]
[ 0.071402] pci_bus 0000:00: root bus resource [mem 0x000c0000-0x000c3fff]
[ 0.072003] pci_bus 0000:00: root bus resource [mem 0x000c4000-0x000c7fff]
[ 0.072401] pci_bus 0000:00: root bus resource [mem 0x000c8000-0x000cbfff]
[ 0.072798] pci_bus 0000:00: root bus resource [mem 0x000cc000-0x000cffff]
[ 0.073003] pci_bus 0000:00: root bus resource [mem 0x000d0000-0x000d3fff]
[ 0.073400] pci_bus 0000:00: root bus resource [mem 0x000d4000-0x000d7fff]
[ 0.074003] pci_bus 0000:00: root bus resource [mem 0x000d8000-0x000dbfff]
[ 0.074400] pci_bus 0000:00: root bus resource [mem 0x000dc000-0x000dffff]
[ 0.074797] pci_bus 0000:00: root bus resource [mem 0x000e0000-0x000e3fff]
[ 0.075003] pci_bus 0000:00: root bus resource [mem 0x000e4000-0x000e7fff]
[ 0.076003] pci_bus 0000:00: root bus resource [mem 0x000e8000-0x000ebfff]
[ 0.077003] pci_bus 0000:00: root bus resource [mem 0x000ec000-0x000effff]
[ 0.077400] pci_bus 0000:00: root bus resource [mem 0x000f0000-0x000fffff]
[ 0.078003] pci_bus 0000:00: root bus resource [mem 0xc0000000-0xfebfffff]
[ 0.078401] pci_bus 0000:00: root bus resource [mem 0xfed40000-0xfed44fff]
[ 0.078808] pci 0000:00:00.0: [8086:27a0] type 00 class 0x060000
[ 0.079024] pci 0000:00:02.0: [8086:27a2] type 00 class 0x030000
[ 0.079038] pci 0000:00:02.0: reg 0x10: [mem 0xe4200000-0xe427ffff]
[ 0.079045] pci 0000:00:02.0: reg 0x14: [io 0x50a0-0x50a7]
[ 0.079053] pci 0000:00:02.0: reg 0x18: [mem 0xd0000000-0xdfffffff pref]
[ 0.079061] pci 0000:00:02.0: reg 0x1c: [mem 0xe4300000-0xe433ffff]
[ 0.079177] pci 0000:00:02.1: [8086:27a6] type 00 class 0x038000
[ 0.079188] pci 0000:00:02.1: reg 0x10: [mem 0xe4280000-0xe42fffff]
[ 0.079366] pci 0000:00:1b.0: [8086:27d8] type 00 class 0x040300
[ 0.079390] pci 0000:00:1b.0: reg 0x10: [mem 0xe4340000-0xe4343fff 64bit]
[ 0.079493] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
[ 0.079562] pci 0000:00:1b.0: System wakeup disabled by ACPI
[ 0.079946] pci 0000:00:1c.0: [8086:27d0] type 01 class 0x060400
[ 0.080058] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
[ 0.080177] pci 0000:00:1c.1: [8086:27d2] type 01 class 0x060400
[ 0.080275] pci 0000:00:1c.1: PME# supported from D0 D3hot D3cold
[ 0.080393] pci 0000:00:1c.2: [8086:27d4] type 01 class 0x060400
[ 0.080491] pci 0000:00:1c.2: PME# supported from D0 D3hot D3cold
[ 0.080604] pci 0000:00:1c.3: [8086:27d6] type 01 class 0x060400
[ 0.080704] pci 0000:00:1c.3: PME# supported from D0 D3hot D3cold
[ 0.080822] pci 0000:00:1d.0: [8086:27c8] type 00 class 0x0c0300
[ 0.080878] pci 0000:00:1d.0: reg 0x20: [io 0x5000-0x501f]
[ 0.080985] pci 0000:00:1d.0: System wakeup disabled by ACPI
[ 0.081044] pci 0000:00:1d.1: [8086:27c9] type 00 class 0x0c0300
[ 0.081100] pci 0000:00:1d.1: reg 0x20: [io 0x5020-0x503f]
[ 0.081201] pci 0000:00:1d.1: System wakeup disabled by ACPI
[ 0.081589] pci 0000:00:1d.2: [8086:27ca] type 00 class 0x0c0300
[ 0.081645] pci 0000:00:1d.2: reg 0x20: [io 0x5040-0x505f]
[ 0.082075] pci 0000:00:1d.2: System wakeup disabled by ACPI
[ 0.082457] pci 0000:00:1d.3: [8086:27cb] type 00 class 0x0c0300
[ 0.082513] pci 0000:00:1d.3: reg 0x20: [io 0x5060-0x507f]
[ 0.082614] pci 0000:00:1d.3: System wakeup disabled by ACPI
[ 0.083009] pci 0000:00:1d.7: [8086:27cc] type 00 class 0x0c0320
[ 0.083034] pci 0000:00:1d.7: reg 0x10: [mem 0xe4344000-0xe43443ff]
[ 0.083141] pci 0000:00:1d.7: PME# supported from D0 D3hot D3cold
[ 0.083205] pci 0000:00:1d.7: System wakeup disabled by ACPI
[ 0.083594] pci 0000:00:1e.0: [8086:2448] type 01 class 0x060401
[ 0.083753] pci 0000:00:1f.0: [8086:27b9] type 00 class 0x060100
[ 0.083868] pci 0000:00:1f.0: address space collision: [io 0x0500-0x057f] conflicts with ACPI CPU throttle [??? 0x00000510-0x00000515 flags 0x80000000]
[ 0.084008] pci 0000:00:1f.0: quirk: [io 0x0480-0x04bf] claimed by ICH6 GPIO
[ 0.085005] pci 0000:00:1f.0: ICH7 LPC Generic IO decode 1 PIO at 1600 (mask 007f)
[ 0.085450] pci 0000:00:1f.0: ICH7 LPC Generic IO decode 2 PIO at 15e0 (mask 000f)
[ 0.085896] pci 0000:00:1f.0: ICH7 LPC Generic IO decode 3 PIO at 1680 (mask 001f)
[ 0.086135] pci 0000:00:1f.1: [8086:27df] type 00 class 0x01018a
[ 0.086153] pci 0000:00:1f.1: reg 0x10: [io 0x50a8-0x50af]
[ 0.086166] pci 0000:00:1f.1: reg 0x14: [io 0x50c8-0x50cb]
[ 0.086178] pci 0000:00:1f.1: reg 0x18: [io 0x50b0-0x50b7]
[ 0.086191] pci 0000:00:1f.1: reg 0x1c: [io 0x50cc-0x50cf]
[ 0.086204] pci 0000:00:1f.1: reg 0x20: [io 0x5080-0x508f]
[ 0.086325] pci 0000:00:1f.2: [8086:27c5] type 00 class 0x010601
[ 0.086350] pci 0000:00:1f.2: reg 0x10: [io 0x50b8-0x50bf]
[ 0.086363] pci 0000:00:1f.2: reg 0x14: [io 0x50d0-0x50d3]
[ 0.086377] pci 0000:00:1f.2: reg 0x18: [io 0x50c0-0x50c7]
[ 0.086390] pci 0000:00:1f.2: reg 0x1c: [io 0x50d4-0x50d7]
[ 0.086403] pci 0000:00:1f.2: reg 0x20: [io 0x5090-0x509f]
[ 0.086415] pci 0000:00:1f.2: reg 0x24: [mem 0xe4344400-0xe43447ff]
[ 0.086473] pci 0000:00:1f.2: PME# supported from D3hot
[ 0.086578] pci 0000:00:1f.3: [8086:27da] type 00 class 0x0c0500
[ 0.087020] pci 0000:00:1f.3: reg 0x20: [io 0x0400-0x041f]
[ 0.087249] pci 0000:01:00.0: [8086:109a] type 00 class 0x020000
[ 0.087281] pci 0000:01:00.0: reg 0x10: [mem 0xe4100000-0xe411ffff]
[ 0.087323] pci 0000:01:00.0: reg 0x18: [io 0x4000-0x401f]
[ 0.087510] pci 0000:01:00.0: PME# supported from D0 D3hot D3cold
[ 0.087586] pci 0000:01:00.0: disabling ASPM on pre-1.1 PCIe device. You can enable it with 'pcie_aspm=force'
[ 0.088019] pci 0000:00:1c.0: PCI bridge to [bus 01]
[ 0.088328] pci 0000:00:1c.0: bridge window [io 0x4000-0x4fff]
[ 0.088334] pci 0000:00:1c.0: bridge window [mem 0xe4100000-0xe41fffff]
[ 0.088412] pci 0000:00:1c.1: PCI bridge to [bus 02]
[ 0.088803] pci 0000:00:1c.2: PCI bridge to [bus 03]
[ 0.089084] pci 0000:00:1c.3: PCI bridge to [bus 04]
[ 0.089456] pci 0000:05:00.0: [104c:ac56] type 02 class 0x060700
[ 0.089484] pci 0000:05:00.0: reg 0x10: [mem 0xe2000000-0xe2000fff]
[ 0.089528] pci 0000:05:00.0: supports D1 D2
[ 0.089531] pci 0000:05:00.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.089576] pci 0000:05:00.0: System wakeup disabled by ACPI
[ 0.090093] pci 0000:00:1e.0: PCI bridge to [bus 05] (subtractive decode)
[ 0.090489] pci 0000:00:1e.0: bridge window [io 0x2000-0x3fff]
[ 0.090495] pci 0000:00:1e.0: bridge window [mem 0xe0000000-0xe20fffff]
[ 0.090505] pci 0000:00:1e.0: bridge window [mem 0xe2100000-0xe40fffff 64bit pref]
[ 0.090508] pci 0000:00:1e.0: bridge window [io 0x0000-0x0cf7] (subtractive decode)
[ 0.090512] pci 0000:00:1e.0: bridge window [io 0x0d00-0xffff] (subtractive decode)
[ 0.090515] pci 0000:00:1e.0: bridge window [mem 0x000a0000-0x000bffff] (subtractive decode)
[ 0.090519] pci 0000:00:1e.0: bridge window [mem 0x000c0000-0x000c3fff] (subtractive decode)
[ 0.090523] pci 0000:00:1e.0: bridge window [mem 0x000c4000-0x000c7fff] (subtractive decode)
[ 0.090526] pci 0000:00:1e.0: bridge window [mem 0x000c8000-0x000cbfff] (subtractive decode)
[ 0.090530] pci 0000:00:1e.0: bridge window [mem 0x000cc000-0x000cffff] (subtractive decode)
[ 0.090533] pci 0000:00:1e.0: bridge window [mem 0x000d0000-0x000d3fff] (subtractive decode)
[ 0.090537] pci 0000:00:1e.0: bridge window [mem 0x000d4000-0x000d7fff] (subtractive decode)
[ 0.090540] pci 0000:00:1e.0: bridge window [mem 0x000d8000-0x000dbfff] (subtractive decode)
[ 0.090544] pci 0000:00:1e.0: bridge window [mem 0x000dc000-0x000dffff] (subtractive decode)
[ 0.090547] pci 0000:00:1e.0: bridge window [mem 0x000e0000-0x000e3fff] (subtractive decode)
[ 0.090551] pci 0000:00:1e.0: bridge window [mem 0x000e4000-0x000e7fff] (subtractive decode)
[ 0.090554] pci 0000:00:1e.0: bridge window [mem 0x000e8000-0x000ebfff] (subtractive decode)
[ 0.090558] pci 0000:00:1e.0: bridge window [mem 0x000ec000-0x000effff] (subtractive decode)
[ 0.090561] pci 0000:00:1e.0: bridge window [mem 0x000f0000-0x000fffff] (subtractive decode)
[ 0.090565] pci 0000:00:1e.0: bridge window [mem 0xc0000000-0xfebfffff] (subtractive decode)
[ 0.090570] pci 0000:00:1e.0: bridge window [mem 0xfed40000-0xfed44fff] (subtractive decode)
[ 0.090575] pci 0000:05:00.0: bridge configuration invalid ([bus 00-00]), reconfiguring
[ 0.091058] pci_bus 0000:06: busn_res: can not insert [bus 06-ff] under [bus 05] (conflicts with (null) [bus 05])
[ 0.091065] pci_bus 0000:06: busn_res: [bus 06-ff] end is updated to 09
[ 0.091069] pci_bus 0000:06: busn_res: can not insert [bus 06-09] under [bus 05] (conflicts with (null) [bus 05])
[ 0.091075] pci_bus 0000:06: [bus 06-09] partially hidden behind transparent bridge 0000:05 [bus 05]
[ 0.091632] pci_bus 0000:00: on NUMA node 0
[ 0.092044] ACPI: PCI Interrupt Link [LNKA] (IRQs 1 3 4 5 6 7 10 12 14 15) *11
[ 0.093141] ACPI: PCI Interrupt Link [LNKB] (IRQs 1 3 4 5 6 7 *11 12 14 15)
[ 0.094257] ACPI: PCI Interrupt Link [LNKC] (IRQs 1 3 4 5 6 7 10 12 14 15) *11
[ 0.095400] ACPI: PCI Interrupt Link [LNKD] (IRQs 1 3 4 5 6 7 *11 12 14 15)
[ 0.096451] ACPI: PCI Interrupt Link [LNKE] (IRQs 1 3 4 5 6 7 10 12 14 15) *11
[ 0.097644] ACPI: PCI Interrupt Link [LNKF] (IRQs 1 3 4 5 6 7 *11 12 14 15)
[ 0.098686] ACPI: PCI Interrupt Link [LNKG] (IRQs 1 3 4 5 6 7 10 12 14 15) *11
[ 0.099879] ACPI: PCI Interrupt Link [LNKH] (IRQs 1 3 4 5 6 7 *11 12 14 15)
[ 0.101356] ACPI: \_SB_.PCI0: notify handler is installed
[ 0.101409] Found 1 acpi root devices
[ 0.101478] ACPI : EC: GPE = 0x1c, I/O: command/status = 0x66, data = 0x62
[ 0.102058] vgaarb: device added: PCI:0000:00:02.0,decodes=io+mem,owns=io+mem,locks=none
[ 0.102489] vgaarb: loaded
[ 0.102683] vgaarb: bridge control possible 0000:00:02.0
[ 0.103115] SCSI subsystem initialized
[ 0.103392] libata version 3.00 loaded.
[ 0.103392] PCI: Using ACPI for IRQ routing
[ 0.106275] PCI: pci_cache_line_size set to 64 bytes
[ 0.106351] e820: reserve RAM buffer [mem 0x0009fc00-0x0009ffff]
[ 0.106354] e820: reserve RAM buffer [mem 0xbf6c0000-0xbfffffff]
[ 0.106536] HPET: 3 timers in total, 0 timers will be used for per-cpu timer
[ 0.106946] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0
[ 0.107259] hpet0: 3 comparators, 64-bit 14.318180 MHz counter
[ 0.109025] Switched to clocksource hpet
[ 0.113528] pnp: PnP ACPI init
[ 0.113757] ACPI: bus type PNP registered
[ 0.114134] system 00:00: [mem 0xfed1c000-0xfed1ffff] has been reserved
[ 0.114520] system 00:00: [mem 0xfed14000-0xfed17fff] has been reserved
[ 0.114905] system 00:00: [mem 0xfed18000-0xfed18fff] has been reserved
[ 0.115301] system 00:00: [mem 0xfed19000-0xfed19fff] has been reserved
[ 0.115687] system 00:00: [mem 0xf0000000-0xf3ffffff] has been reserved
[ 0.116080] system 00:00: [mem 0xfed20000-0xfed3ffff] has been reserved
[ 0.116465] system 00:00: [mem 0xfed40000-0xfed44fff] has been reserved
[ 0.116851] system 00:00: [mem 0xfed45000-0xfed8ffff] has been reserved
[ 0.117246] system 00:00: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.117759] pnp 00:01: [dma 4]
[ 0.117794] pnp 00:01: Plug and Play ACPI device, IDs PNP0200 (active)
[ 0.117832] pnp 00:02: Plug and Play ACPI device, IDs INT0800 (active)
[ 0.117959] system 00:03: [mem 0xfed00000-0xfed003ff] has been reserved
[ 0.118356] system 00:03: Plug and Play ACPI device, IDs PNP0103 PNP0c01 (active)
[ 0.118416] pnp 00:04: Plug and Play ACPI device, IDs PNP0c04 (active)
[ 0.118486] system 00:05: [io 0x0800-0x080f] has been reserved
[ 0.118838] system 00:05: [io 0x0500-0x057f] could not be reserved
[ 0.119217] system 00:05: [io 0x0480-0x04bf] has been reserved
[ 0.119569] system 00:05: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.119609] pnp 00:06: Plug and Play ACPI device, IDs PNP0b00 (active)
[ 0.119671] pnp 00:07: Plug and Play ACPI device, IDs PNP0303 PNP030b (active)
[ 0.119723] pnp 00:08: Plug and Play ACPI device, IDs PNP0f13 (active)
[ 0.119763] pnp: PnP ACPI: found 9 devices
[ 0.120035] ACPI: bus type PNP unregistered
[ 0.157967] pci 0000:00:1c.0: bridge window [mem 0x00100000-0x000fffff 64bit pref] to [bus 01] add_size 200000
[ 0.158025] pci 0000:00:1f.0: BAR 13: [io 0x0500-0x057f] has bogus alignment
[ 0.158437] pci 0000:00:1c.0: res[15]=[mem 0x00100000-0x000fffff 64bit pref] get_res_add_size add_size 200000
[ 0.158448] pci 0000:00:1c.0: BAR 15: assigned [mem 0xc0000000-0xc01fffff 64bit pref]
[ 0.158904] pci 0000:00:1c.0: PCI bridge to [bus 01]
[ 0.159220] pci 0000:00:1c.0: bridge window [io 0x4000-0x4fff]
[ 0.159584] pci 0000:00:1c.0: bridge window [mem 0xe4100000-0xe41fffff]
[ 0.159980] pci 0000:00:1c.0: bridge window [mem 0xc0000000-0xc01fffff 64bit pref]
[ 0.160446] pci 0000:00:1c.1: PCI bridge to [bus 02]
[ 0.160763] pci 0000:00:1c.2: PCI bridge to [bus 03]
[ 0.161089] pci 0000:00:1c.3: PCI bridge to [bus 04]
[ 0.161408] pci 0000:05:00.0: res[15]=[mem 0x04000000-0x03ffffff pref] get_res_add_size add_size 4000000
[ 0.161412] pci 0000:05:00.0: res[16]=[mem 0x04000000-0x03ffffff] get_res_add_size add_size 4000000
[ 0.161416] pci 0000:05:00.0: res[13]=[io 0x0100-0x00ff] get_res_add_size add_size 100
[ 0.161420] pci 0000:05:00.0: res[14]=[io 0x0100-0x00ff] get_res_add_size add_size 100
[ 0.161428] pci 0000:05:00.0: BAR 15: assigned [mem 0xc4000000-0xc7ffffff pref]
[ 0.161863] pci 0000:05:00.0: BAR 16: assigned [mem 0xc8000000-0xcbffffff]
[ 0.162269] pci 0000:05:00.0: BAR 13: assigned [io 0x2000-0x20ff]
[ 0.162633] pci 0000:05:00.0: BAR 14: assigned [io 0x2400-0x24ff]
[ 0.162999] pci 0000:05:00.0: CardBus bridge to [bus 06-09]
[ 0.163341] pci 0000:05:00.0: bridge window [io 0x2000-0x20ff]
[ 0.163704] pci 0000:05:00.0: bridge window [io 0x2400-0x24ff]
[ 0.164075] pci 0000:05:00.0: bridge window [mem 0xc4000000-0xc7ffffff pref]
[ 0.164505] pci 0000:05:00.0: bridge window [mem 0xc8000000-0xcbffffff]
[ 0.164902] pci 0000:00:1e.0: PCI bridge to [bus 05]
[ 0.165217] pci 0000:00:1e.0: bridge window [io 0x2000-0x3fff]
[ 0.165581] pci 0000:00:1e.0: bridge window [mem 0xe0000000-0xe20fffff]
[ 0.165978] pci 0000:00:1e.0: bridge window [mem 0xe2100000-0xe40fffff 64bit pref]
[ 0.166444] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7]
[ 0.166449] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff]
[ 0.166453] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff]
[ 0.166456] pci_bus 0000:00: resource 7 [mem 0x000c0000-0x000c3fff]
[ 0.166459] pci_bus 0000:00: resource 8 [mem 0x000c4000-0x000c7fff]
[ 0.166463] pci_bus 0000:00: resource 9 [mem 0x000c8000-0x000cbfff]
[ 0.166466] pci_bus 0000:00: resource 10 [mem 0x000cc000-0x000cffff]
[ 0.166469] pci_bus 0000:00: resource 11 [mem 0x000d0000-0x000d3fff]
[ 0.166473] pci_bus 0000:00: resource 12 [mem 0x000d4000-0x000d7fff]
[ 0.166476] pci_bus 0000:00: resource 13 [mem 0x000d8000-0x000dbfff]
[ 0.166479] pci_bus 0000:00: resource 14 [mem 0x000dc000-0x000dffff]
[ 0.166483] pci_bus 0000:00: resource 15 [mem 0x000e0000-0x000e3fff]
[ 0.166486] pci_bus 0000:00: resource 16 [mem 0x000e4000-0x000e7fff]
[ 0.166490] pci_bus 0000:00: resource 17 [mem 0x000e8000-0x000ebfff]
[ 0.166494] pci_bus 0000:00: resource 18 [mem 0x000ec000-0x000effff]
[ 0.166497] pci_bus 0000:00: resource 19 [mem 0x000f0000-0x000fffff]
[ 0.166500] pci_bus 0000:00: resource 20 [mem 0xc0000000-0xfebfffff]
[ 0.166504] pci_bus 0000:00: resource 21 [mem 0xfed40000-0xfed44fff]
[ 0.166507] pci_bus 0000:01: resource 0 [io 0x4000-0x4fff]
[ 0.166511] pci_bus 0000:01: resource 1 [mem 0xe4100000-0xe41fffff]
[ 0.166514] pci_bus 0000:01: resource 2 [mem 0xc0000000-0xc01fffff 64bit pref]
[ 0.166518] pci_bus 0000:05: resource 0 [io 0x2000-0x3fff]
[ 0.166521] pci_bus 0000:05: resource 1 [mem 0xe0000000-0xe20fffff]
[ 0.166525] pci_bus 0000:05: resource 2 [mem 0xe2100000-0xe40fffff 64bit pref]
[ 0.166528] pci_bus 0000:05: resource 4 [io 0x0000-0x0cf7]
[ 0.166531] pci_bus 0000:05: resource 5 [io 0x0d00-0xffff]
[ 0.166535] pci_bus 0000:05: resource 6 [mem 0x000a0000-0x000bffff]
[ 0.166538] pci_bus 0000:05: resource 7 [mem 0x000c0000-0x000c3fff]
[ 0.166542] pci_bus 0000:05: resource 8 [mem 0x000c4000-0x000c7fff]
[ 0.166545] pci_bus 0000:05: resource 9 [mem 0x000c8000-0x000cbfff]
[ 0.166548] pci_bus 0000:05: resource 10 [mem 0x000cc000-0x000cffff]
[ 0.166552] pci_bus 0000:05: resource 11 [mem 0x000d0000-0x000d3fff]
[ 0.166555] pci_bus 0000:05: resource 12 [mem 0x000d4000-0x000d7fff]
[ 0.166558] pci_bus 0000:05: resource 13 [mem 0x000d8000-0x000dbfff]
[ 0.166562] pci_bus 0000:05: resource 14 [mem 0x000dc000-0x000dffff]
[ 0.166565] pci_bus 0000:05: resource 15 [mem 0x000e0000-0x000e3fff]
[ 0.166568] pci_bus 0000:05: resource 16 [mem 0x000e4000-0x000e7fff]
[ 0.166572] pci_bus 0000:05: resource 17 [mem 0x000e8000-0x000ebfff]
[ 0.166575] pci_bus 0000:05: resource 18 [mem 0x000ec000-0x000effff]
[ 0.166579] pci_bus 0000:05: resource 19 [mem 0x000f0000-0x000fffff]
[ 0.166582] pci_bus 0000:05: resource 20 [mem 0xc0000000-0xfebfffff]
[ 0.166585] pci_bus 0000:05: resource 21 [mem 0xfed40000-0xfed44fff]
[ 0.166589] pci_bus 0000:06: resource 0 [io 0x2000-0x20ff]
[ 0.166592] pci_bus 0000:06: resource 1 [io 0x2400-0x24ff]
[ 0.166596] pci_bus 0000:06: resource 2 [mem 0xc4000000-0xc7ffffff pref]
[ 0.166599] pci_bus 0000:06: resource 3 [mem 0xc8000000-0xcbffffff]
[ 0.166639] NET: Registered protocol family 2
[ 0.167104] TCP established hash table entries: 8192 (order: 3, 32768 bytes)
[ 0.167544] TCP bind hash table entries: 8192 (order: 4, 65536 bytes)
[ 0.167985] TCP: Hash tables configured (established 8192 bind 8192)
[ 0.168399] TCP: reno registered
[ 0.168620] UDP hash table entries: 512 (order: 2, 16384 bytes)
[ 0.168988] UDP-Lite hash table entries: 512 (order: 2, 16384 bytes)
[ 0.169449] NET: Registered protocol family 1
[ 0.169738] pci 0000:00:02.0: Boot video device
[ 0.170826] PCI: CLS 64 bytes, default 64
[ 0.170886] Unpacking initramfs...
[ 0.339497] Freeing initrd memory: 5184K (f70c0000 - f75d0000)
[ 0.340387] audit: initializing netlink socket (disabled)
[ 0.340732] type=2000 audit(1393942111.339:1): initialized
[ 0.341548] bounce pool size: 64 pages
[ 0.341798] HugeTLB registered 4 MB page size, pre-allocated 0 pages
[ 0.344347] VFS: Disk quotas dquot_6.5.2
[ 0.344664] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
[ 0.345563] msgmni has been set to 1709
[ 0.346237] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253)
[ 0.346673] io scheduler noop registered
[ 0.346926] io scheduler deadline registered
[ 0.347278] io scheduler cfq registered (default)
[ 0.347839] pcieport 0000:00:1c.0: irq 40 for MSI/MSI-X
[ 0.348080] pcieport 0000:00:1c.1: irq 41 for MSI/MSI-X
[ 0.348293] pcieport 0000:00:1c.2: irq 42 for MSI/MSI-X
[ 0.348498] pcieport 0000:00:1c.3: irq 43 for MSI/MSI-X
[ 0.348641] pcieport 0000:00:1c.0: Signaling PME through PCIe PME interrupt
[ 0.349059] pci 0000:01:00.0: Signaling PME through PCIe PME interrupt
[ 0.349443] pcie_pme 0000:00:1c.0:pcie01: service driver pcie_pme loaded
[ 0.349470] pcieport 0000:00:1c.1: Signaling PME through PCIe PME interrupt
[ 0.349875] pcie_pme 0000:00:1c.1:pcie01: service driver pcie_pme loaded
[ 0.349902] pcieport 0000:00:1c.2: Signaling PME through PCIe PME interrupt
[ 0.350323] pcie_pme 0000:00:1c.2:pcie01: service driver pcie_pme loaded
[ 0.350349] pcieport 0000:00:1c.3: Signaling PME through PCIe PME interrupt
[ 0.350753] pcie_pme 0000:00:1c.3:pcie01: service driver pcie_pme loaded
[ 0.350793] intel_idle: does not run on family 6 model 14
[ 0.350885] input: Sleep Button as /devices/LNXSYSTM:00/device:00/PNP0A08:00/device:24/PNP0C09:00/PNP0C0E:00/input/input0
[ 0.351519] ACPI: Sleep Button [SLPB]
[ 0.351819] input: Lid Switch as /devices/LNXSYSTM:00/device:00/PNP0A08:00/device:24/PNP0C09:00/PNP0C0D:00/input/input1
[ 0.352566] ACPI: Lid Switch [LID]
[ 0.352857] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input2
[ 0.353302] ACPI: Power Button [PWRF]
[ 0.353772] ACPI: Video Device [GFX0] (multi-head: yes rom: no post: no)
[ 0.354309] input: Video Bus as /devices/LNXSYSTM:00/device:00/PNP0A08:00/LNXVIDEO:00/input/input3
[ 0.354914] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
[ 0.355924] Linux agpgart interface v0.103
[ 0.356234] agpgart-intel 0000:00:00.0: Intel 945GM Chipset
[ 0.356604] agpgart-intel 0000:00:00.0: detected gtt size: 262144K total, 262144K mappable
[ 0.357725] agpgart-intel 0000:00:00.0: detected 8192K stolen memory
[ 0.358269] agpgart-intel 0000:00:00.0: AGP aperture is 256M @ 0xd0000000
[ 0.358711] [drm] Initialized drm 1.1.0 20060810
[ 0.359534] [drm] Memory usable by graphics device = 256M
[ 0.360078] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
[ 0.360462] [drm] Driver supports precise vblank timestamp query.
[ 0.360899] vgaarb: device changed decodes: PCI:0000:00:02.0,olddecodes=io+mem,decodes=io+mem:owns=io+mem
[ 0.469599] [drm] initialized overlay support
[ 0.659172] fbcon: inteldrmfb (fb0) is primary device
[ 1.147918] Console: switching to colour frame buffer device 128x48
[ 1.152756] i915 0000:00:02.0: fb0: inteldrmfb frame buffer device
[ 1.153121] i915 0000:00:02.0: registered panic notifier
[ 1.153436] [drm] Initialized i915 1.6.0 20080730 for 0000:00:02.0 on minor 0
[ 1.153975] ahci 0000:00:1f.2: version 3.0
[ 1.154165] ahci 0000:00:1f.2: irq 44 for MSI/MSI-X
[ 1.154212] ahci 0000:00:1f.2: SSS flag set, parallel bus scan disabled
[ 1.154621] ahci 0000:00:1f.2: AHCI 0001.0100 32 slots 4 ports 1.5 Gbps 0x1 impl SATA mode
[ 1.155105] ahci 0000:00:1f.2: flags: 64bit ncq ilck stag pm led clo pmp pio slum part
[ 1.156055] scsi0 : ahci
[ 1.156320] scsi1 : ahci
[ 1.156575] scsi2 : ahci
[ 1.156820] scsi3 : ahci
[ 1.157040] ata1: SATA max UDMA/133 abar m1024@0xe4344400 port 0xe4344500 irq 44
[ 1.157463] ata2: DUMMY
[ 1.157610] ata3: DUMMY
[ 1.157757] ata4: DUMMY
[ 1.157989] ata_piix 0000:00:1f.1: version 2.13
[ 1.158540] scsi4 : ata_piix
[ 1.158797] scsi5 : ata_piix
[ 1.159026] ata5: PATA max UDMA/100 cmd 0x1f0 ctl 0x3f6 bmdma 0x5080 irq 14
[ 1.161159] ata6: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0x5088 irq 15
[ 1.163469] ata6: port disabled--ignoring
[ 1.163494] i8042: PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at 0x60,0x64 irq 1,12
[ 1.175964] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 1.178039] serio: i8042 AUX port at 0x60,0x64 irq 12
[ 1.180149] mousedev: PS/2 mouse device common for all mice
[ 1.182208] rtc_cmos 00:06: RTC can wake from S4
[ 1.184336] rtc_cmos 00:06: rtc core: registered rtc_cmos as rtc0
[ 1.186389] rtc_cmos 00:06: alarms up to one month, y3k, 242 bytes nvram, hpet irqs
[ 1.188573] device-mapper: uevent: version 1.0.3
[ 1.190595] device-mapper: ioctl: 4.27.0-ioctl (2013-10-30) initialised: dm-devel@redhat.com
[ 1.192849] TCP: cubic registered
[ 1.194908] NET: Registered protocol family 10
[ 1.197112] mip6: Mobile IPv6
[ 1.198963] NET: Registered protocol family 17
[ 1.200942] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input4
[ 1.203137] Key type dns_resolver registered
[ 1.205293] Using IPI No-Shortcut mode
[ 1.207352] registered taskstats version 1
[ 1.209893] rtc_cmos 00:06: setting system clock to 2014-03-04 14:08:32 UTC (1393942112)
[ 1.317390] ata5.00: ATAPI: HL-DT-STCD-RW/DVD DRIVE GCC-4246N, 0X05, max UDMA/33
[ 1.325269] ata5.00: configured for UDMA/33
[ 1.341019] tsc: Refined TSC clocksource calibration: 1994.999 MHz
[ 1.617028] ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[ 1.620192] ata1.00: ATA-7: HTS541040G9SA00, MB2IC60R, max UDMA/100
[ 1.622301] ata1.00: 78140160 sectors, multi 0: LBA48
[ 1.625635] ata1.00: configured for UDMA/100
[ 1.627739] scsi 0:0:0:0: Direct-Access ATA HTS541040G9SA00 MB2I PQ: 0 ANSI: 5
[ 1.630086] sd 0:0:0:0: [sda] 78140160 512-byte logical blocks: (40.0 GB/37.2 GiB)
[ 1.632390] sd 0:0:0:0: [sda] Write Protect is off
[ 1.634421] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 1.634449] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 1.636786] scsi 4:0:0:0: CD-ROM HL-DT-ST RW/DVD GCC-4246N 0X05 PQ: 0 ANSI: 5
[ 1.643859] sr0: scsi3-mmc drive: 24x/24x writer cd/rw xa/form2 cdda tray
[ 1.646013] cdrom: Uniform CD-ROM driver Revision: 3.20
[ 1.648313] sr 4:0:0:0: Attached scsi CD-ROM sr0
[ 2.013194] sda: sda1 sda2 < sda5 >
[ 2.015614] sd 0:0:0:0: [sda] Attached SCSI disk
[ 2.017778] attempt to access beyond end of device
[ 2.019903] sda2: rw=16, want=8, limit=2
[ 2.021971] Read-error on swap-device (8:2:0)
[ 2.024346] Freeing unused kernel memory: 468K (c15cb000 - c1640000)
[ 2.026723] Write protecting the kernel text: 4064k
[ 2.028969] Write protecting the kernel read-only data: 1544k
[ 2.042573] udevd[70]: starting version 175
[ 2.077254] pps_core: LinuxPPS API ver. 1 registered
[ 2.096026] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it>
[ 2.099460] ACPI: bus type USB registered
[ 2.101907] PTP clock support registered
[ 2.104967] e1000e: Intel(R) PRO/1000 Network Driver - 2.3.2-k
[ 2.107395] usbcore: registered new interface driver usbfs
[ 2.109726] e1000e: Copyright(c) 1999 - 2013 Intel Corporation.
[ 2.112092] usbcore: registered new interface driver hub
[ 2.114657] e1000e 0000:01:00.0: Interrupt Throttling Rate (ints/sec) set to dynamic conservative mode
[ 2.117944] thermal LNXTHERM:00: registered as thermal_zone0
[ 2.120072] e1000e 0000:01:00.0: irq 45 for MSI/MSI-X
[ 2.122087] usbcore: registered new device driver usb
[ 2.126450] ACPI: Thermal Zone [THM0] (65 C)
[ 2.126884] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 2.127180] uhci_hcd: USB Universal Host Controller Interface driver
[ 2.127373] uhci_hcd 0000:00:1d.0: UHCI Host Controller
[ 2.127381] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 1
[ 2.127419] uhci_hcd 0000:00:1d.0: irq 16, io base 0x00005000
[ 2.127506] usb usb1: New USB device found, idVendor=1d6b, idProduct=0001
[ 2.127508] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 2.127510] usb usb1: Product: UHCI Host Controller
[ 2.127512] usb usb1: Manufacturer: Linux 3.13.5-gnu-stolenmem-owen uhci_hcd
[ 2.127514] usb usb1: SerialNumber: 0000:00:1d.0
[ 2.127665] hub 1-0:1.0: USB hub found
[ 2.127675] hub 1-0:1.0: 2 ports detected
[ 2.127905] uhci_hcd 0000:00:1d.1: UHCI Host Controller
[ 2.127910] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 2
[ 2.127956] uhci_hcd 0000:00:1d.1: irq 17, io base 0x00005020
[ 2.128223] usb usb2: New USB device found, idVendor=1d6b, idProduct=0001
[ 2.128226] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 2.128228] usb usb2: Product: UHCI Host Controller
[ 2.128230] usb usb2: Manufacturer: Linux 3.13.5-gnu-stolenmem-owen uhci_hcd
[ 2.128232] usb usb2: SerialNumber: 0000:00:1d.1
[ 2.128360] hub 2-0:1.0: USB hub found
[ 2.128369] hub 2-0:1.0: 2 ports detected
[ 2.128577] uhci_hcd 0000:00:1d.2: UHCI Host Controller
[ 2.128582] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 3
[ 2.128623] uhci_hcd 0000:00:1d.2: irq 18, io base 0x00005040
[ 2.128847] usb usb3: New USB device found, idVendor=1d6b, idProduct=0001
[ 2.128849] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 2.128851] usb usb3: Product: UHCI Host Controller
[ 2.128853] usb usb3: Manufacturer: Linux 3.13.5-gnu-stolenmem-owen uhci_hcd
[ 2.128855] usb usb3: SerialNumber: 0000:00:1d.2
[ 2.128969] hub 3-0:1.0: USB hub found
[ 2.128977] hub 3-0:1.0: 2 ports detected
[ 2.129215] uhci_hcd 0000:00:1d.3: UHCI Host Controller
[ 2.129224] uhci_hcd 0000:00:1d.3: new USB bus registered, assigned bus number 4
[ 2.129264] uhci_hcd 0000:00:1d.3: irq 19, io base 0x00005060
[ 2.129328] usb usb4: New USB device found, idVendor=1d6b, idProduct=0001
[ 2.129330] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 2.129332] usb usb4: Product: UHCI Host Controller
[ 2.129334] usb usb4: Manufacturer: Linux 3.13.5-gnu-stolenmem-owen uhci_hcd
[ 2.129336] usb usb4: SerialNumber: 0000:00:1d.3
[ 2.129453] hub 4-0:1.0: USB hub found
[ 2.129462] hub 4-0:1.0: 2 ports detected
[ 2.234404] thermal LNXTHERM:01: registered as thermal_zone1
[ 2.237112] ACPI: Thermal Zone [THM1] (32 C)
[ 2.276296] e1000e 0000:01:00.0 eth0: (PCI Express:2.5GT/s:Width x1) 00:15:58:7b:44:9c
[ 2.278405] e1000e 0000:01:00.0 eth0: Intel(R) PRO/1000 Network Connection
[ 2.280526] e1000e 0000:01:00.0 eth0: MAC: 2, PHY: 2, PBA No: 005301-003
[ 2.343087] Switched to clocksource tsc
[ 2.428028] usb 4-1: new full-speed USB device number 2 using uhci_hcd
[ 2.543028] raid6: mmxx1 1941 MB/s
[ 2.561023] raid6: mmxx2 1992 MB/s
[ 2.579019] raid6: sse1x1 1398 MB/s
[ 2.580835] usb 4-1: New USB device found, idVendor=0a5c, idProduct=2110
[ 2.583016] usb 4-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[ 2.585277] usb 4-1: Product: BCM2045B
[ 2.587358] usb 4-1: Manufacturer: Broadcom Corp
[ 2.597038] raid6: sse1x2 1808 MB/s
[ 2.615013] raid6: sse2x1 2179 MB/s
[ 2.633016] raid6: sse2x2 2421 MB/s
[ 2.634795] raid6: using algorithm sse2x2 (2421 MB/s)
[ 2.636630] raid6: using intx1 recovery algorithm
[ 2.638653] xor: measuring software checksum speed
[ 2.650004] pIII_sse : 5152.000 MB/sec
[ 2.661004] prefetch64-sse: 5580.000 MB/sec
[ 2.662802] xor: using function: prefetch64-sse (5580.000 MB/sec)
[ 2.670338] bio: create slab <bio-1> at 1
[ 2.672581] Btrfs loaded
[ 2.674338] btrfs: selftest: Running btrfs free space cache tests
[ 2.676240] btrfs: selftest: Running extent only tests
[ 2.678081] btrfs: selftest: Running bitmap only tests
[ 2.679883] btrfs: selftest: Running bitmap and extent tests
[ 2.681688] btrfs: selftest: Free space cache tests finished
[ 2.683476] btrfs: selftest: Running extent buffer operation tests
[ 2.683823] btrfs: selftest: Running btrfs_split_item tests
[ 2.687119] btrfs: selftest: Running find delalloc tests
[ 2.809097] btrfs: selftest: Running btrfs_get_extent tests
[ 2.811023] btrfs: selftest: Running hole first btrfs_get_extent test
[ 2.950317] EXT4-fs (sda1): mounted filesystem with ordered data mode. Opts: (null)
[ 2.974921] random: nonblocking pool is initialized
[ 5.286407] udevd[350]: starting version 175
[ 6.267606] input: PC Speaker as /devices/platform/pcspkr/input/input6
[ 6.410231] microcode: CPU0 sig=0x6ec, pf=0x20, revision=0x0
[ 6.412157] microcode: Missing Free firmware
[ 6.443165] platform microcode: Direct firmware load failed with error -2
[ 6.445084] platform microcode: Falling back to user helper
[ 6.451783] ACPI Warning: 0x00000400-0x0000041f SystemIO conflicts with Region \_SB_.PCI0.SBUS.SMBI 1 (20131115/utaddress-251)
[ 6.455618] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[ 6.483397] ACPI Warning: 0x00000528-0x0000052f SystemIO conflicts with Region \PMIO 1 (20131115/utaddress-251)
[ 6.488307] pci 0000:00:1e.0: enabling device (0104 -> 0107)
[ 6.490581] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[ 6.490596] yenta_cardbus 0000:05:00.0: CardBus bridge found [0000:0000]
[ 6.490655] yenta_cardbus 0000:05:00.0: Using CSCINT to route CSC interrupts to PCI
[ 6.490657] yenta_cardbus 0000:05:00.0: Routing CardBus interrupts to PCI
[ 6.490670] yenta_cardbus 0000:05:00.0: TI: mfunc 0x01d01002, devctl 0x66
[ 6.501702] ACPI Warning: 0x000004b0-0x000004bf SystemIO conflicts with Region \GPIO 1 (20131115/utaddress-251)
[ 6.504149] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[ 6.506650] ACPI Warning: 0x00000480-0x000004af SystemIO conflicts with Region \GPIO 1 (20131115/utaddress-251)
[ 6.509342] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[ 6.511995] ACPI: processor limited to max C-state 2
[ 6.512376] lpc_ich: Resource conflict(s) found affecting gpio_ich
[ 6.517415] Monitor-Mwait will be used to enter C-1 state
[ 6.517451] tsc: Marking TSC unstable due to TSC halts in idle
[ 6.519983] ACPI: acpi_idle registered with cpuidle
[ 6.520128] Switched to clocksource hpet
[ 6.525182] ACPI: AC Adapter [AC] (on-line)
[ 6.527804] ACPI Exception: AE_NOT_FOUND, Error reading AC Adapter state (20131115/ac-78)
[ 6.583926] ehci-pci: EHCI PCI platform driver
[ 6.649208] usb 4-1: USB disconnect, device number 2
[ 6.652078] ehci-pci 0000:00:1d.7: EHCI Host Controller
[ 6.654525] ehci-pci 0000:00:1d.7: new USB bus registered, assigned bus number 5
[ 6.657131] ehci-pci 0000:00:1d.7: debug port 1
[ 6.663441] ehci-pci 0000:00:1d.7: cache line size of 64 is not supported
[ 6.663453] ehci-pci 0000:00:1d.7: irq 19, io mem 0xe4344000
[ 6.671038] ehci-pci 0000:00:1d.7: USB 2.0 started, EHCI 1.00
[ 6.673611] usb usb5: New USB device found, idVendor=1d6b, idProduct=0002
[ 6.676212] usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 6.676447] Non-volatile memory driver v1.3
[ 6.681329] usb usb5: Product: EHCI Host Controller
[ 6.683854] usb usb5: Manufacturer: Linux 3.13.5-gnu-stolenmem-owen ehci_hcd
[ 6.686519] usb usb5: SerialNumber: 0000:00:1d.7
[ 6.689253] hub 5-0:1.0: USB hub found
[ 6.691765] hub 5-0:1.0: 8 ports detected
[ 6.715087] hub 1-0:1.0: USB hub found
[ 6.717518] hub 1-0:1.0: 2 ports detected
[ 6.742106] hub 2-0:1.0: USB hub found
[ 6.744531] hub 2-0:1.0: 2 ports detected
[ 6.768725] hub 3-0:1.0: USB hub found
[ 6.771248] hub 3-0:1.0: 2 ports detected
[ 6.795112] hub 4-0:1.0: USB hub found
[ 6.797438] hub 4-0:1.0: 2 ports detected
[ 6.823062] hda_intel: probe_mask set to 0x1 for device 17aa:2010
[ 6.825433] snd_hda_intel 0000:00:1b.0: irq 46 for MSI/MSI-X
[ 6.969223] input: HDA Intel Front Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card0/input12
[ 6.971774] input: HDA Intel Line Out as /devices/pci0000:00/0000:00:1b.0/sound/card0/input11
[ 6.974319] input: HDA Intel Line as /devices/pci0000:00/0000:00:1b.0/sound/card0/input10
[ 6.976774] input: HDA Intel Front Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input9
[ 6.979235] input: HDA Intel Rear Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input8
[ 7.040706] ACPI: Battery Slot [BAT0] (battery present)
[ 7.043182] ACPI: Battery Slot [BAT1] (battery absent)
[ 7.059313] psmouse serio1: synaptics: Touchpad model: 1, fw: 6.2, id: 0x81a0b1, caps: 0xa04793/0x300000/0x0, board id: 71, fw id: 67352
[ 7.063934] psmouse serio1: synaptics: serio: Synaptics pass-through port at isa0060/serio1/input0
[ 7.112768] input: SynPS/2 Synaptics TouchPad as /devices/platform/i8042/serio1/input/input7
[ 7.164912] microcode: CPU1 sig=0x6ec, pf=0x20, revision=0x0
[ 7.167173] microcode: Missing Free firmware
[ 7.169356] platform microcode: Direct firmware load failed with error -2
[ 7.170183] yenta_cardbus 0000:05:00.0: ISA IRQ mask 0x0cf8, PCI irq 16
[ 7.170187] yenta_cardbus 0000:05:00.0: Socket status: 30000007
[ 7.170191] pci_bus 0000:05: Raising subordinate bus# of parent bus (#05) from #05 to #09
[ 7.170201] yenta_cardbus 0000:05:00.0: pcmcia: parent PCI bridge window: [io 0x2000-0x3fff]
[ 7.170204] yenta_cardbus 0000:05:00.0: pcmcia: parent PCI bridge window: [mem 0xe0000000-0xe20fffff]
[ 7.170207] pcmcia_socket pcmcia_socket0: cs: memory probe 0xe0000000-0xe20fffff:
[ 7.170220] excluding 0xe1ef0000-0xe20fffff
[ 7.170223] yenta_cardbus 0000:05:00.0: pcmcia: parent PCI bridge window: [mem 0xe2100000-0xe40fffff 64bit pref]
[ 7.170225] pcmcia_socket pcmcia_socket0: cs: memory probe 0xe2100000-0xe40fffff:
[ 7.170254] excluding 0xe2100000-0xe40fffff
[ 7.195023] platform microcode: Falling back to user helper
[ 7.200964] microcode: Microcode Update Driver: v2.00 <tigran@aivazian.fsnet.co.uk>, Peter Oruba
[ 7.315379] Bluetooth: Core ver 2.17
[ 7.317750] NET: Registered protocol family 31
[ 7.320043] Bluetooth: HCI device and connection manager initialized
[ 7.322473] Bluetooth: HCI socket layer initialized
[ 7.324794] Bluetooth: L2CAP socket layer initialized
[ 7.327110] Bluetooth: SCO socket layer initialized
[ 7.367808] usbcore: registered new interface driver btusb
[ 7.407940] pcmcia_socket pcmcia_socket0: cs: memory probe 0x0c0000-0x0fffff:
[ 7.410450] excluding 0xf0000-0xfffff
[ 7.412825] pcmcia_socket pcmcia_socket0: cs: memory probe 0xa0000000-0xa0ffffff:
[ 7.415460] excluding 0xa0000000-0xa0ffffff
[ 7.417937] pcmcia_socket pcmcia_socket0: cs: memory probe 0x60000000-0x60ffffff:
[ 7.420602] excluding 0x60000000-0x60ffffff
[ 7.659080] usb 4-1: new full-speed USB device number 3 using uhci_hcd
[ 7.814099] usb 4-1: New USB device found, idVendor=0a5c, idProduct=2110
[ 7.816819] usb 4-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[ 7.819526] usb 4-1: Product: BCM2045B
[ 7.822013] usb 4-1: Manufacturer: Broadcom Corp
[ 10.530518] psmouse serio2: alps: Unknown ALPS touchpad: E7=10 00 64, EC=10 00 64
[ 11.003630] Adding 1028124k swap on /dev/sda5. Priority:0 extents:1 across:1028124k
[ 11.030502] EXT4-fs (sda1): re-mounted. Opts: (null)
[ 11.536095] EXT4-fs (sda1): re-mounted. Opts: errors=remount-ro
[ 11.712492] psmouse serio2: trackpoint: IBM TrackPoint firmware: 0x0e, buttons: 3/3
[ 11.950985] input: TPPS/2 IBM TrackPoint as /devices/platform/i8042/serio1/serio2/input/input13
[ 17.781092] input: ACPI Virtual Keyboard Device as /devices/virtual/input/input14
[ 21.575735] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
[ 21.578286] Bluetooth: BNEP filters: protocol multicast
[ 21.580777] Bluetooth: BNEP socket layer initialized
[ 21.753707] Bluetooth: RFCOMM TTY layer initialized
[ 21.756156] Bluetooth: RFCOMM socket layer initialized
[ 21.758567] Bluetooth: RFCOMM ver 1.11
[ 26.200294] e1000e 0000:01:00.0: irq 45 for MSI/MSI-X
[ 26.301109] e1000e 0000:01:00.0: irq 45 for MSI/MSI-X
[ 26.301621] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 27.019593] lp: driver loaded but no devices found
[ 27.045543] ppdev: user-space parallel port driver
[ 28.848034] e1000e: eth0 NIC Link is Up 1000 Mbps Full Duplex, Flow Control: Rx/Tx
[ 28.848561] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
[ 35.766557] type=1006 audit(1393942147.055:2): pid=3122 uid=0 old auid=4294967295 new auid=1000 old ses=4294967295 new ses=1 res=1