blob: 0ec38d9d54f40a987eba27a41a67fb22ce511ff2 [file] [log] [blame]
[ 0.000000] Initializing cgroup subsys cpuset
[ 0.000000] Initializing cgroup subsys cpu
[ 0.000000] Initializing cgroup subsys cpuacct
[ 0.000000] Linux version 3.17.4-1-ARCH (builduser@tobias) (gcc version 4.9.2 (GCC) ) #1 SMP PREEMPT Fri Nov 21 21:14:42 CET 2014
[ 0.000000] Command line: BOOT_IMAGE=/vmlinuz-linux root=UUID=142ffd8e-f09f-469f-86af-752e19824e0a rw memory_corruption_check=1 memory_corruption_check_size=512k quiet
[ 0.000000] tseg: 0000000000
[ 0.000000] e820: BIOS-provided physical RAM map:
[ 0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009fbff] usable
[ 0.000000] BIOS-e820: [mem 0x000000000009fc00-0x000000000009ffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000000f0000-0x00000000000fffff] reserved
[ 0.000000] BIOS-e820: [mem 0x0000000000100000-0x00000000bfc0dfff] usable
[ 0.000000] BIOS-e820: [mem 0x00000000bfc0e000-0x00000000dfffffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000f8000000-0x00000000fbffffff] reserved
[ 0.000000] BIOS-e820: [mem 0x0000000100000000-0x000000021effffff] usable
[ 0.000000] NX (Execute Disable) protection: active
[ 0.000000] SMBIOS 2.7 present.
[ 0.000000] DMI: ALTERA PRAXIS PTY LTD *INVALID*/*INVALID*, BIOS ap-pty-ltd 11/27/2014
[ 0.000000] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
[ 0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable
[ 0.000000] AGP: No AGP bridge found
[ 0.000000] e820: last_pfn = 0x21f000 max_arch_pfn = 0x400000000
[ 0.000000] MTRR default type: uncachable
[ 0.000000] MTRR fixed ranges enabled:
[ 0.000000] 00000-9FFFF write-back
[ 0.000000] A0000-BFFFF uncachable
[ 0.000000] C0000-FFFFF write-back
[ 0.000000] MTRR variable ranges enabled:
[ 0.000000] 0 base 000000000000 mask FFFF80000000 write-back
[ 0.000000] 1 base 000080000000 mask FFFFC0000000 write-back
[ 0.000000] 2 base 0000E0000000 mask FFFFF0000000 write-combining
[ 0.000000] 3 disabled
[ 0.000000] 4 disabled
[ 0.000000] 5 disabled
[ 0.000000] 6 disabled
[ 0.000000] 7 disabled
[ 0.000000] TOM2: 000000021f000000 aka 8688M
[ 0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
[ 0.000000] e820: last_pfn = 0xbfc0e max_arch_pfn = 0x400000000
[ 0.000000] found SMP MP-table at [mem 0x000f1d90-0x000f1d9f] mapped at [ffff8800000f1d90]
[ 0.000000] Scanning 1 areas for low memory corruption
[ 0.000000] Base memory trampoline at [ffff880000099000] 99000 size 24576
[ 0.000000] Using GB pages for direct mapping
[ 0.000000] init_memory_mapping: [mem 0x00000000-0x000fffff]
[ 0.000000] [mem 0x00000000-0x000fffff] page 4k
[ 0.000000] BRK [0x01b2c000, 0x01b2cfff] PGTABLE
[ 0.000000] BRK [0x01b2d000, 0x01b2dfff] PGTABLE
[ 0.000000] BRK [0x01b2e000, 0x01b2efff] PGTABLE
[ 0.000000] init_memory_mapping: [mem 0x21ee00000-0x21effffff]
[ 0.000000] [mem 0x21ee00000-0x21effffff] page 2M
[ 0.000000] BRK [0x01b2f000, 0x01b2ffff] PGTABLE
[ 0.000000] init_memory_mapping: [mem 0x21c000000-0x21edfffff]
[ 0.000000] [mem 0x21c000000-0x21edfffff] page 2M
[ 0.000000] init_memory_mapping: [mem 0x200000000-0x21bffffff]
[ 0.000000] [mem 0x200000000-0x21bffffff] page 2M
[ 0.000000] init_memory_mapping: [mem 0x00100000-0xbfc0dfff]
[ 0.000000] [mem 0x00100000-0x001fffff] page 4k
[ 0.000000] [mem 0x00200000-0x3fffffff] page 2M
[ 0.000000] [mem 0x40000000-0x7fffffff] page 1G
[ 0.000000] [mem 0x80000000-0xbfbfffff] page 2M
[ 0.000000] [mem 0xbfc00000-0xbfc0dfff] page 4k
[ 0.000000] init_memory_mapping: [mem 0x100000000-0x1ffffffff]
[ 0.000000] [mem 0x100000000-0x1ffffffff] page 1G
[ 0.000000] RAMDISK: [mem 0x37274000-0x37931fff]
[ 0.000000] ACPI: Early table checksum verification disabled
[ 0.000000] ACPI: RSDP 0x00000000000F1D60 000024 (v02 CORE )
[ 0.000000] ACPI: XSDT 0x00000000BFFD36E0 00005C (v01 CORE COREBOOT 00000000 CORE 00000000)
[ 0.000000] ACPI: FACP 0x00000000BFFD5AA0 0000F4 (v04 CORE COREBOOT 00000000 CORE 00000000)
[ 0.000000] ACPI: DSDT 0x00000000BFFD3850 00224E (v02 AMD COREBOOT 00010001 INTL 20140114)
[ 0.000000] ACPI: FACS 0x00000000BFFD3810 000040
[ 0.000000] ACPI: SSDT 0x00000000BFFD5BA0 000045 (v02 CORE COREBOOT 0000002A CORE 0000002A)
[ 0.000000] ACPI: APIC 0x00000000BFFD5BF0 000072 (v01 CORE COREBOOT 00000000 CORE 00000000)
[ 0.000000] ACPI: HPET 0x00000000BFFD5C70 000038 (v01 CORE COREBOOT 00000000 CORE 00000000)
[ 0.000000] ACPI: HEST 0x00000000BFFD5CB0 0001D0 (v01 CORE COREBOOT 00000000 CORE 00000000)
[ 0.000000] ACPI: SSDT 0x00000000BFFD5E80 001ED4 (v02 AMD ALIB 00000001 MSFT 04000000)
[ 0.000000] ACPI: SSDT 0x00000000BFFD7D60 0009F8 (v01 AMD POWERNOW 00000001 AMD 00000001)
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] No NUMA configuration found
[ 0.000000] Faking a node at [mem 0x0000000000000000-0x000000021effffff]
[ 0.000000] Initmem setup node 0 [mem 0x00000000-0x21effffff]
[ 0.000000] NODE_DATA [mem 0x21effa000-0x21effdfff]
[ 0.000000] [ffffea0000000000-ffffea00087fffff] PMD -> [ffff880216e00000-ffff88021e5fffff] on node 0
[ 0.000000] Zone ranges:
[ 0.000000] DMA [mem 0x00001000-0x00ffffff]
[ 0.000000] DMA32 [mem 0x01000000-0xffffffff]
[ 0.000000] Normal [mem 0x100000000-0x21effffff]
[ 0.000000] Movable zone start for each node
[ 0.000000] Early memory node ranges
[ 0.000000] node 0: [mem 0x00001000-0x0009efff]
[ 0.000000] node 0: [mem 0x00100000-0xbfc0dfff]
[ 0.000000] node 0: [mem 0x100000000-0x21effffff]
[ 0.000000] On node 0 totalpages: 1960876
[ 0.000000] DMA zone: 64 pages used for memmap
[ 0.000000] DMA zone: 133 pages reserved
[ 0.000000] DMA zone: 3998 pages, LIFO batch:0
[ 0.000000] DMA32 zone: 12209 pages used for memmap
[ 0.000000] DMA32 zone: 781326 pages, LIFO batch:31
[ 0.000000] Normal zone: 18368 pages used for memmap
[ 0.000000] Normal zone: 1175552 pages, LIFO batch:31
[ 0.000000] ACPI: PM-Timer IO Port: 0x818
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x10] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x11] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x12] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x13] enabled)
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0xff] high edge lint[0x1])
[ 0.000000] ACPI: IOAPIC (id[0x04] address[0xfec00000] gsi_base[0])
[ 0.000000] IOAPIC[0]: apic_id 4, version 33, address 0xfec00000, GSI 0-23
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 low level)
[ 0.000000] ACPI: IRQ0 used by override.
[ 0.000000] ACPI: IRQ9 used by override.
[ 0.000000] Using ACPI (MADT) for SMP configuration information
[ 0.000000] ACPI: HPET id: 0x10228210 base: 0xfed00000
[ 0.000000] smpboot: Allowing 4 CPUs, 0 hotplug CPUs
[ 0.000000] PM: Registered nosave memory: [mem 0x0009f000-0x0009ffff]
[ 0.000000] PM: Registered nosave memory: [mem 0x000a0000-0x000effff]
[ 0.000000] PM: Registered nosave memory: [mem 0x000f0000-0x000fffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xbfc0e000-0xdfffffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xe0000000-0xf7ffffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xf8000000-0xfbffffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfc000000-0xffffffff]
[ 0.000000] e820: [mem 0xe0000000-0xf7ffffff] available for PCI devices
[ 0.000000] Booting paravirtualized kernel on bare hardware
[ 0.000000] setup_percpu: NR_CPUS:128 nr_cpumask_bits:128 nr_cpu_ids:4 nr_node_ids:1
[ 0.000000] PERCPU: Embedded 29 pages/cpu @ffff88021ec00000 s86848 r8192 d23744 u524288
[ 0.000000] pcpu-alloc: s86848 r8192 d23744 u524288 alloc=1*2097152
[ 0.000000] pcpu-alloc: [0] 0 1 2 3
[ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 1930102
[ 0.000000] Policy zone: Normal
[ 0.000000] Kernel command line: BOOT_IMAGE=/vmlinuz-linux root=UUID=142ffd8e-f09f-469f-86af-752e19824e0a rw memory_corruption_check=1 memory_corruption_check_size=512k quiet
[ 0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes)
[ 0.000000] xsave: enabled xstate_bv 0x7, cntxt size 0x340 using standard form
[ 0.000000] AGP: Checking aperture...
[ 0.000000] AGP: No AGP bridge found
[ 0.000000] AGP: Node 0: aperture [bus addr 0x00000000-0x01ffffff] (32MB)
[ 0.000000] AGP: Your BIOS doesn't leave a aperture memory hole
[ 0.000000] AGP: Please enable the IOMMU option in the BIOS setup
[ 0.000000] AGP: This costs you 64MB of RAM
[ 0.000000] AGP: Mapping aperture over RAM [mem 0xb4000000-0xb7ffffff] (65536KB)
[ 0.000000] PM: Registered nosave memory: [mem 0xb4000000-0xb7ffffff]
[ 0.000000] Memory: 7569400K/7843504K available (5386K kernel code, 896K rwdata, 1712K rodata, 1140K init, 1176K bss, 274104K reserved)
[ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
[ 0.000000] Preemptible hierarchical RCU implementation.
[ 0.000000] RCU dyntick-idle grace-period acceleration is enabled.
[ 0.000000] Dump stacks of tasks blocking RCU-preempt GP.
[ 0.000000] RCU restricting CPUs from NR_CPUS=128 to nr_cpu_ids=4.
[ 0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=4
[ 0.000000] NR_IRQS:8448 nr_irqs:456 0
[ 0.000000] spurious 8259A interrupt: IRQ7.
[ 0.000000] Console: colour dummy device 80x25
[ 0.000000] console [tty0] enabled
[ 0.000000] allocated 31457280 bytes of page_cgroup
[ 0.000000] please try 'cgroup_disable=memory' option if you don't want memory cgroups
[ 0.000000] hpet clockevent registered
[ 0.000000] tsc: Fast TSC calibration using PIT
[ 0.000000] tsc: Detected 2495.409 MHz processor
[ 0.000032] Calibrating delay loop (skipped), value calculated using timer frequency.. 4992.76 BogoMIPS (lpj=8318030)
[ 0.000036] pid_max: default: 32768 minimum: 301
[ 0.000046] ACPI: Core revision 20140724
[ 0.003339] ACPI: All ACPI Tables successfully acquired
[ 0.006379] Security Framework initialized
[ 0.006389] Yama: becoming mindful.
[ 0.007176] Dentry cache hash table entries: 1048576 (order: 11, 8388608 bytes)
[ 0.009640] Inode-cache hash table entries: 524288 (order: 10, 4194304 bytes)
[ 0.010727] Mount-cache hash table entries: 16384 (order: 5, 131072 bytes)
[ 0.010743] Mountpoint-cache hash table entries: 16384 (order: 5, 131072 bytes)
[ 0.011027] Initializing cgroup subsys memory
[ 0.011036] Initializing cgroup subsys devices
[ 0.011039] Initializing cgroup subsys freezer
[ 0.011042] Initializing cgroup subsys net_cls
[ 0.011045] Initializing cgroup subsys blkio
[ 0.011065] [Firmware Info]: CPU: Re-enabling disabled Topology Extensions Support.
[ 0.011071] CPU: Physical Processor ID: 0
[ 0.011072] CPU: Processor Core ID: 0
[ 0.011074] mce: CPU supports 7 MCE banks
[ 0.011087] Last level iTLB entries: 4KB 512, 2MB 1024, 4MB 512
Last level dTLB entries: 4KB 1024, 2MB 1024, 4MB 512, 1GB 0
[ 0.011188] Freeing SMP alternatives memory: 20K (ffffffff819ff000 - ffffffff81a04000)
[ 0.012062] ftrace: allocating 20686 entries in 81 pages
[ 0.021069] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=0 pin2=0
[ 0.054049] smpboot: CPU0: AMD A10-5750M APU with Radeon(tm) HD Graphics (fam: 15, model: 13, stepping: 01)
[ 0.159149] Performance Events: Fam15h core perfctr, AMD PMU driver.
[ 0.159156] ... version: 0
[ 0.159158] ... bit width: 48
[ 0.159159] ... generic registers: 6
[ 0.159160] ... value mask: 0000ffffffffffff
[ 0.159162] ... max period: 00007fffffffffff
[ 0.159163] ... fixed-purpose events: 0
[ 0.159164] ... event mask: 000000000000003f
[ 0.175927] NMI watchdog: enabled on all CPUs, permanently consumes one hw-PMU counter.
[ 0.179300] x86: Booting SMP configuration:
[ 0.179304] .... node #0, CPUs: #1
[ 0.190336] [Firmware Info]: CPU: Re-enabling disabled Topology Extensions Support.
[ 0.199278] #2
[ 0.210311] [Firmware Info]: CPU: Re-enabling disabled Topology Extensions Support.
[ 0.230294] #3
[ 0.230294] [Firmware Info]: CPU: Re-enabling disabled Topology Extensions Support.
[ 0.232403] x86: Booted up 1 node, 4 CPUs
[ 0.232408] smpboot: Total of 4 processors activated (19971.07 BogoMIPS)
[ 0.233481] devtmpfs: initialized
[ 0.239448] pinctrl core: initialized pinctrl subsystem
[ 0.239486] RTC time: 11:10:39, date: 11/27/14
[ 0.239592] NET: Registered protocol family 16
[ 0.239763] cpuidle: using governor ladder
[ 0.239766] cpuidle: using governor menu
[ 0.239884] ACPI: bus type PCI registered
[ 0.239886] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
[ 0.239981] PCI: Using configuration type 1 for base access
[ 0.239982] PCI: Using configuration type 1 for extended access
[ 0.253051] ACPI: Added _OSI(Module Device)
[ 0.253055] ACPI: Added _OSI(Processor Device)
[ 0.253057] ACPI: Added _OSI(3.0 _SCP Extensions)
[ 0.253059] ACPI: Added _OSI(Processor Aggregator Device)
[ 0.255093] ACPI: Executed 1 blocks of module-level executable AML code
[ 0.262545] ACPI: Interpreter enabled
[ 0.262593] ACPI: (supports S0 S1 S2 S3 S4 S5)
[ 0.262596] ACPI: Using IOAPIC for interrupt routing
[ 0.262633] HEST: Table parsing has been initialized.
[ 0.262637] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
[ 0.270547] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
[ 0.270555] acpi PNP0A03:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI]
[ 0.270667] acpi PNP0A03:00: _OSC: OS now controls [PCIeHotplug PME AER PCIeCapability]
[ 0.270770] acpi PNP0A03:00: host bridge window expanded to [io 0x0000-0x0cf7]; [io 0x0000-0x0cf7] ignored
[ 0.271003] PCI host bridge to bus 0000:00
[ 0.271006] pci_bus 0000:00: root bus resource [bus 00-ff]
[ 0.271009] pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7]
[ 0.271011] pci_bus 0000:00: root bus resource [io 0x0d00-0xffff]
[ 0.271014] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff]
[ 0.271016] pci_bus 0000:00: root bus resource [mem 0x000c0000-0x000dffff]
[ 0.271019] pci_bus 0000:00: root bus resource [mem 0xe0000000-0xffffffff]
[ 0.271027] pci 0000:00:00.0: [1022:1410] type 00 class 0x060000
[ 0.271157] pci 0000:00:01.0: [1002:990b] type 00 class 0x030000
[ 0.271168] pci 0000:00:01.0: reg 0x10: [mem 0xe0000000-0xefffffff pref]
[ 0.271175] pci 0000:00:01.0: reg 0x14: [io 0x2000-0x20ff]
[ 0.271181] pci 0000:00:01.0: reg 0x18: [mem 0xf0200000-0xf023ffff]
[ 0.271222] pci 0000:00:01.0: supports D1 D2
[ 0.271313] pci 0000:00:01.1: [1002:9902] type 00 class 0x040300
[ 0.271323] pci 0000:00:01.1: reg 0x10: [mem 0xf0240000-0xf0243fff]
[ 0.271370] pci 0000:00:01.1: supports D1 D2
[ 0.271466] pci 0000:00:04.0: [1022:1414] type 01 class 0x060400
[ 0.271514] pci 0000:00:04.0: PME# supported from D0 D3hot D3cold
[ 0.271574] pci 0000:00:04.0: System wakeup disabled by ACPI
[ 0.271630] pci 0000:00:05.0: [1022:1415] type 01 class 0x060400
[ 0.271678] pci 0000:00:05.0: PME# supported from D0 D3hot D3cold
[ 0.271735] pci 0000:00:05.0: System wakeup disabled by ACPI
[ 0.271802] pci 0000:00:11.0: [1022:7801] type 00 class 0x010601
[ 0.271818] pci 0000:00:11.0: reg 0x10: [io 0x2410-0x2417]
[ 0.271827] pci 0000:00:11.0: reg 0x14: [io 0x2420-0x2423]
[ 0.271836] pci 0000:00:11.0: reg 0x18: [io 0x2418-0x241f]
[ 0.271845] pci 0000:00:11.0: reg 0x1c: [io 0x2424-0x2427]
[ 0.271854] pci 0000:00:11.0: reg 0x20: [io 0x2400-0x240f]
[ 0.271863] pci 0000:00:11.0: reg 0x24: [mem 0xf024b000-0xf024b7ff]
[ 0.271985] pci 0000:00:12.0: [1022:7807] type 00 class 0x0c0310
[ 0.271997] pci 0000:00:12.0: reg 0x10: [mem 0xf0248000-0xf0248fff]
[ 0.272096] pci 0000:00:12.0: System wakeup disabled by ACPI
[ 0.272155] pci 0000:00:12.2: [1022:7808] type 00 class 0x0c0320
[ 0.272173] pci 0000:00:12.2: reg 0x10: [mem 0xf024b800-0xf024b8ff]
[ 0.272247] pci 0000:00:12.2: supports D1 D2
[ 0.272249] pci 0000:00:12.2: PME# supported from D0 D1 D2 D3hot
[ 0.272305] pci 0000:00:12.2: System wakeup disabled by ACPI
[ 0.272373] pci 0000:00:13.0: [1022:7807] type 00 class 0x0c0310
[ 0.272386] pci 0000:00:13.0: reg 0x10: [mem 0xf0249000-0xf0249fff]
[ 0.272485] pci 0000:00:13.0: System wakeup disabled by ACPI
[ 0.272544] pci 0000:00:13.2: [1022:7808] type 00 class 0x0c0320
[ 0.272562] pci 0000:00:13.2: reg 0x10: [mem 0xf024b900-0xf024b9ff]
[ 0.272636] pci 0000:00:13.2: supports D1 D2
[ 0.272638] pci 0000:00:13.2: PME# supported from D0 D1 D2 D3hot
[ 0.272694] pci 0000:00:13.2: System wakeup disabled by ACPI
[ 0.272754] pci 0000:00:14.0: [1022:780b] type 00 class 0x0c0500
[ 0.272901] pci 0000:00:14.2: [1022:780d] type 00 class 0x040300
[ 0.272920] pci 0000:00:14.2: reg 0x10: [mem 0xf0244000-0xf0247fff 64bit]
[ 0.272980] pci 0000:00:14.2: PME# supported from D0 D3hot D3cold
[ 0.273084] pci 0000:00:14.3: [1022:780e] type 00 class 0x060100
[ 0.273231] pci 0000:00:14.4: [1022:780f] type 01 class 0x060401
[ 0.273304] pci 0000:00:14.4: System wakeup disabled by ACPI
[ 0.273357] pci 0000:00:14.5: [1022:7809] type 00 class 0x0c0310
[ 0.273370] pci 0000:00:14.5: reg 0x10: [mem 0x00000000-0x00000fff]
[ 0.273468] pci 0000:00:14.5: System wakeup disabled by ACPI
[ 0.273526] pci 0000:00:16.0: [1022:7807] type 00 class 0x0c0310
[ 0.273539] pci 0000:00:16.0: reg 0x10: [mem 0xf024a000-0xf024afff]
[ 0.273637] pci 0000:00:16.0: System wakeup disabled by ACPI
[ 0.273698] pci 0000:00:16.2: [1022:7808] type 00 class 0x0c0320
[ 0.273715] pci 0000:00:16.2: reg 0x10: [mem 0xf024ba00-0xf024baff]
[ 0.273789] pci 0000:00:16.2: supports D1 D2
[ 0.273791] pci 0000:00:16.2: PME# supported from D0 D1 D2 D3hot
[ 0.273847] pci 0000:00:16.2: System wakeup disabled by ACPI
[ 0.273905] pci 0000:00:18.0: [1022:1400] type 00 class 0x060000
[ 0.274005] pci 0000:00:18.1: [1022:1401] type 00 class 0x060000
[ 0.274101] pci 0000:00:18.2: [1022:1402] type 00 class 0x060000
[ 0.274199] pci 0000:00:18.3: [1022:1403] type 00 class 0x060000
[ 0.274301] pci 0000:00:18.4: [1022:1404] type 00 class 0x060000
[ 0.274397] pci 0000:00:18.5: [1022:1405] type 00 class 0x060000
[ 0.274562] pci 0000:01:00.0: [1969:10a0] type 00 class 0x020000
[ 0.274584] pci 0000:01:00.0: reg 0x10: [mem 0xf0000000-0xf003ffff 64bit]
[ 0.274594] pci 0000:01:00.0: reg 0x18: [io 0x1000-0x107f]
[ 0.274684] pci 0000:01:00.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.279125] pci 0000:00:04.0: PCI bridge to [bus 01]
[ 0.279134] pci 0000:00:04.0: bridge window [io 0x1000-0x1fff]
[ 0.279138] pci 0000:00:04.0: bridge window [mem 0xf0000000-0xf00fffff]
[ 0.279236] pci 0000:02:00.0: [168c:0036] type 00 class 0x028000
[ 0.279259] pci 0000:02:00.0: reg 0x10: [mem 0xf0100000-0xf017ffff 64bit]
[ 0.279300] pci 0000:02:00.0: reg 0x30: [mem 0xf0180000-0xf018ffff pref]
[ 0.279361] pci 0000:02:00.0: supports D1 D2
[ 0.279364] pci 0000:02:00.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.285781] pci 0000:00:05.0: PCI bridge to [bus 02]
[ 0.285791] pci 0000:00:05.0: bridge window [mem 0xf0100000-0xf01fffff]
[ 0.285905] pci 0000:00:14.4: PCI bridge to [bus 03] (subtractive decode)
[ 0.285915] pci 0000:00:14.4: bridge window [io 0x0000-0x0cf7] (subtractive decode)
[ 0.285917] pci 0000:00:14.4: bridge window [io 0x0d00-0xffff] (subtractive decode)
[ 0.285920] pci 0000:00:14.4: bridge window [mem 0x000a0000-0x000bffff] (subtractive decode)
[ 0.285922] pci 0000:00:14.4: bridge window [mem 0x000c0000-0x000dffff] (subtractive decode)
[ 0.285925] pci 0000:00:14.4: bridge window [mem 0xe0000000-0xffffffff] (subtractive decode)
[ 0.289273] ACPI: PCI Interrupt Link [INTA] (IRQs 3 4 5 7 10 11 12 15) *0
[ 0.289343] ACPI: PCI Interrupt Link [INTB] (IRQs 3 4 5 7 10 11 12 15) *0
[ 0.289408] ACPI: PCI Interrupt Link [INTC] (IRQs 3 4 5 7 10 11 12 15) *0
[ 0.289472] ACPI: PCI Interrupt Link [INTD] (IRQs 3 4 5 7 10 11 12 15) *0
[ 0.289535] ACPI: PCI Interrupt Link [INTE] (IRQs 3 4 5 7 10 11 12 15) *0
[ 0.289598] ACPI: PCI Interrupt Link [INTF] (IRQs 9) *0
[ 0.289658] ACPI: PCI Interrupt Link [INTG] (IRQs 3 4 5 7 10 11 12 15) *0
[ 0.289720] ACPI: PCI Interrupt Link [INTH] (IRQs 3 4 5 7 10 11 12 15) *0
[ 0.289795] ACPI: Enabled 5 GPEs in block 00 to 1F
[ 0.289856] ACPI : EC: GPE = 0x3, I/O: command/status = 0x66, data = 0x62
[ 0.290014] vgaarb: setting as boot device: PCI:0000:00:01.0
[ 0.290017] vgaarb: device added: PCI:0000:00:01.0,decodes=io+mem,owns=io+mem,locks=none
[ 0.290026] vgaarb: loaded
[ 0.290027] vgaarb: bridge control possible 0000:00:01.0
[ 0.290084] PCI: Using ACPI for IRQ routing
[ 0.290087] PCI: pci_cache_line_size set to 64 bytes
[ 0.290142] e820: reserve RAM buffer [mem 0x0009fc00-0x0009ffff]
[ 0.290145] e820: reserve RAM buffer [mem 0xbfc0e000-0xbfffffff]
[ 0.290147] e820: reserve RAM buffer [mem 0x21f000000-0x21fffffff]
[ 0.290292] NetLabel: Initializing
[ 0.290294] NetLabel: domain hash size = 128
[ 0.290295] NetLabel: protocols = UNLABELED CIPSOv4
[ 0.290310] NetLabel: unlabeled traffic allowed by default
[ 0.290344] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0
[ 0.290348] hpet0: 3 comparators, 32-bit 14.318180 MHz counter
[ 0.292416] Switched to clocksource hpet
[ 0.301167] pnp: PnP ACPI init
[ 0.301385] system 00:00: [mem 0xfec10002-0xfec11001] has been reserved
[ 0.301390] system 00:00: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.301435] pnp 00:01: Plug and Play ACPI device, IDs PNP0b00 (active)
[ 0.302686] pnp: PnP ACPI: found 2 devices
[ 0.310195] pci 0000:00:14.5: BAR 0: assigned [mem 0xf024c000-0xf024cfff]
[ 0.310201] pci 0000:00:04.0: PCI bridge to [bus 01]
[ 0.310205] pci 0000:00:04.0: bridge window [io 0x1000-0x1fff]
[ 0.310209] pci 0000:00:04.0: bridge window [mem 0xf0000000-0xf00fffff]
[ 0.310215] pci 0000:00:05.0: PCI bridge to [bus 02]
[ 0.310219] pci 0000:00:05.0: bridge window [mem 0xf0100000-0xf01fffff]
[ 0.310224] pci 0000:00:14.4: PCI bridge to [bus 03]
[ 0.310236] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7]
[ 0.310238] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff]
[ 0.310241] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff]
[ 0.310243] pci_bus 0000:00: resource 7 [mem 0x000c0000-0x000dffff]
[ 0.310246] pci_bus 0000:00: resource 8 [mem 0xe0000000-0xffffffff]
[ 0.310248] pci_bus 0000:01: resource 0 [io 0x1000-0x1fff]
[ 0.310250] pci_bus 0000:01: resource 1 [mem 0xf0000000-0xf00fffff]
[ 0.310253] pci_bus 0000:02: resource 1 [mem 0xf0100000-0xf01fffff]
[ 0.310255] pci_bus 0000:03: resource 4 [io 0x0000-0x0cf7]
[ 0.310258] pci_bus 0000:03: resource 5 [io 0x0d00-0xffff]
[ 0.310260] pci_bus 0000:03: resource 6 [mem 0x000a0000-0x000bffff]
[ 0.310262] pci_bus 0000:03: resource 7 [mem 0x000c0000-0x000dffff]
[ 0.310264] pci_bus 0000:03: resource 8 [mem 0xe0000000-0xffffffff]
[ 0.310298] NET: Registered protocol family 2
[ 0.310591] TCP established hash table entries: 65536 (order: 7, 524288 bytes)
[ 0.310823] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
[ 0.311059] TCP: Hash tables configured (established 65536 bind 65536)
[ 0.311097] TCP: reno registered
[ 0.311116] UDP hash table entries: 4096 (order: 5, 131072 bytes)
[ 0.311164] UDP-Lite hash table entries: 4096 (order: 5, 131072 bytes)
[ 0.311261] NET: Registered protocol family 1
[ 0.311281] pci 0000:00:01.0: Video device with shadowed ROM
[ 0.313058] pci 0000:01:00.0: set MSI_INTX_DISABLE_BUG flag
[ 0.313065] PCI: CLS 64 bytes, default 64
[ 0.313129] Unpacking initramfs...
[ 0.466186] Freeing initrd memory: 6904K (ffff880037274000 - ffff880037932000)
[ 0.466198] PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
[ 0.466201] software IO TLB [mem 0xbbc0e000-0xbfc0e000] (64MB) mapped at [ffff8800bbc0e000-ffff8800bfc0dfff]
[ 0.466494] perf: AMD NB counters detected
[ 0.466573] microcode: CPU0: patch_level=0x00000000
[ 0.466584] microcode: CPU1: patch_level=0x00000000
[ 0.466591] microcode: CPU2: patch_level=0x00000000
[ 0.466599] microcode: CPU3: patch_level=0x00000000
[ 0.466673] microcode: Microcode Update Driver: v2.00 <tigran@aivazian.fsnet.co.uk>, Peter Oruba
[ 0.466678] LVT offset 0 assigned for vector 0x400
[ 0.466694] perf: AMD IBS detected (0x000000ff)
[ 0.466728] Scanning for low memory corruption every 60 seconds
[ 0.467227] futex hash table entries: 1024 (order: 4, 65536 bytes)
[ 0.467251] Initialise system trusted keyring
[ 0.467819] HugeTLB registered 2 MB page size, pre-allocated 0 pages
[ 0.470117] zpool: loaded
[ 0.470120] zbud: loaded
[ 0.470393] VFS: Disk quotas dquot_6.5.2
[ 0.470444] Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[ 0.470612] msgmni has been set to 14797
[ 0.470686] Key type big_key registered
[ 0.470977] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252)
[ 0.471032] io scheduler noop registered
[ 0.471036] io scheduler deadline registered
[ 0.471080] io scheduler cfq registered (default)
[ 0.471334] pcieport 0000:00:04.0: irq 24 for MSI/MSI-X
[ 0.471521] pcieport 0000:00:05.0: irq 25 for MSI/MSI-X
[ 0.471617] pcieport 0000:00:04.0: Signaling PME through PCIe PME interrupt
[ 0.471620] pci 0000:01:00.0: Signaling PME through PCIe PME interrupt
[ 0.471623] pcie_pme 0000:00:04.0:pcie01: service driver pcie_pme loaded
[ 0.471640] pcieport 0000:00:05.0: Signaling PME through PCIe PME interrupt
[ 0.471642] pci 0000:02:00.0: Signaling PME through PCIe PME interrupt
[ 0.471646] pcie_pme 0000:00:05.0:pcie01: service driver pcie_pme loaded
[ 0.471668] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[ 0.471694] pciehp: PCI Express Hot Plug Controller Driver version: 0.4
[ 0.471734] vesafb: mode is 1366x768x32, linelength=5632, pages=0
[ 0.471736] vesafb: scrolling: redraw
[ 0.471739] vesafb: Truecolor: size=0:8:8:8, shift=0:16:8:0
[ 0.471756] vesafb: framebuffer at 0xe0000000, mapped to 0xffffc90000e80000, using 4224k, total 4224k
[ 0.474861] Console: switching to colour frame buffer device 170x48
[ 0.477968] fb0: VESA VGA frame buffer device
[ 0.478039] GHES: Failed to enable APEI firmware first mode.
[ 0.478125] Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled
[ 0.478568] Linux agpgart interface v0.103
[ 0.478627] rtc_cmos 00:01: RTC can wake from S4
[ 0.478748] rtc_cmos 00:01: rtc core: registered rtc_cmos as rtc0
[ 0.478772] rtc_cmos 00:01: alarms up to one day, 114 bytes nvram, hpet irqs
[ 0.478787] ledtrig-cpu: registered to indicate activity on CPUs
[ 0.478906] TCP: cubic registered
[ 0.479071] NET: Registered protocol family 10
[ 0.479376] NET: Registered protocol family 17
[ 0.479952] Loading compiled-in X.509 certificates
[ 0.479977] registered taskstats version 1
[ 0.480446] Magic number: 6:841:176
[ 0.480465] acpi device:0c: hash matches
[ 0.480508] rtc_cmos 00:01: setting system clock to 2014-11-27 11:10:39 UTC (1417086639)
[ 0.480566] PM: Hibernation image not present or could not be loaded.
[ 0.481778] Freeing unused kernel memory: 1140K (ffffffff818e2000 - ffffffff819ff000)
[ 0.481780] Write protecting the kernel read-only data: 8192k
[ 0.485528] Freeing unused kernel memory: 748K (ffff880001545000 - ffff880001600000)
[ 0.487190] Freeing unused kernel memory: 336K (ffff8800017ac000 - ffff880001800000)
[ 0.496749] random: systemd-tmpfile urandom read with 4 bits of entropy available
[ 0.503209] [drm] Initialized drm 1.1.0 20060810
[ 0.510792] [drm] radeon kernel modesetting enabled.
[ 0.510829] checking generic (e0000000 420000) vs hw (e0000000 10000000)
[ 0.510831] fb: switching to radeondrmfb from VESA VGA
[ 0.510854] Console: switching to colour dummy device 80x25
[ 0.511357] [drm] initializing kernel modesetting (ARUBA 0x1002:0x990B 0x1002:0x990B).
[ 0.511368] [drm] register mmio base: 0xF0200000
[ 0.511370] [drm] register mmio size: 262144
[ 0.511405] ATOM BIOS: 113
[ 0.511474] radeon 0000:00:01.0: VRAM: 512M 0x0000000000000000 - 0x000000001FFFFFFF (512M used)
[ 0.511478] radeon 0000:00:01.0: GTT: 1024M 0x0000000020000000 - 0x000000005FFFFFFF
[ 0.511480] [drm] Detected VRAM RAM=512M, BAR=256M
[ 0.511481] [drm] RAM width 64bits DDR
[ 0.511563] [TTM] Zone kernel: Available graphics memory: 3789274 kiB
[ 0.511565] [TTM] Zone dma32: Available graphics memory: 2097152 kiB
[ 0.511567] [TTM] Initializing pool allocator
[ 0.511574] [TTM] Initializing DMA pool allocator
[ 0.511599] [drm] radeon: 512M of VRAM memory ready
[ 0.511600] [drm] radeon: 1024M of GTT memory ready.
[ 0.511618] [drm] Loading ARUBA Microcode
[ 0.511698] [drm] Internal thermal controller without fan control
[ 0.511878] [drm] radeon: dpm initialized
[ 0.512025] [drm] GART: num cpu pages 262144, num gpu pages 262144
[ 0.520035] [drm] PCIE GART of 1024M enabled (table at 0x0000000000276000).
[ 0.520147] radeon 0000:00:01.0: WB enabled
[ 0.520151] radeon 0000:00:01.0: fence driver on ring 0 use gpu addr 0x0000000020000c00 and cpu addr 0xffff880212381c00
[ 0.520880] radeon 0000:00:01.0: fence driver on ring 5 use gpu addr 0x0000000000075a18 and cpu addr 0xffffc90001635a18
[ 0.520882] radeon 0000:00:01.0: fence driver on ring 1 use gpu addr 0x0000000020000c04 and cpu addr 0xffff880212381c04
[ 0.520885] radeon 0000:00:01.0: fence driver on ring 2 use gpu addr 0x0000000020000c08 and cpu addr 0xffff880212381c08
[ 0.520887] radeon 0000:00:01.0: fence driver on ring 3 use gpu addr 0x0000000020000c0c and cpu addr 0xffff880212381c0c
[ 0.520890] radeon 0000:00:01.0: fence driver on ring 4 use gpu addr 0x0000000020000c10 and cpu addr 0xffff880212381c10
[ 0.520893] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
[ 0.520894] [drm] Driver supports precise vblank timestamp query.
[ 0.520914] radeon 0000:00:01.0: irq 26 for MSI/MSI-X
[ 0.520928] radeon 0000:00:01.0: radeon: using MSI.
[ 0.521201] [drm] radeon: irq initialized.
[ 0.540445] [drm] ring test on 0 succeeded in 2 usecs
[ 0.540453] [drm] ring test on 3 succeeded in 3 usecs
[ 0.540460] [drm] ring test on 4 succeeded in 3 usecs
[ 0.596470] [drm] ring test on 5 succeeded in 1 usecs
[ 0.616471] [drm] UVD initialized successfully.
[ 0.617383] [drm] ib test on ring 0 succeeded in 0 usecs
[ 0.617903] [drm] ib test on ring 3 succeeded in 0 usecs
[ 0.618421] [drm] ib test on ring 4 succeeded in 0 usecs
[ 0.639325] [drm] ib test on ring 5 succeeded
[ 0.665037] [drm] radeon atom DIG backlight initialized
[ 0.665040] [drm] Radeon Display Connectors
[ 0.665042] [drm] Connector 0:
[ 0.665043] [drm] eDP-1
[ 0.665045] [drm] HPD1
[ 0.665047] [drm] DDC: 0x6530 0x6530 0x6534 0x6534 0x6538 0x6538 0x653c 0x653c
[ 0.665049] [drm] Encoders:
[ 0.665050] [drm] LCD1: INTERNAL_UNIPHY2
[ 0.665051] [drm] Connector 1:
[ 0.665053] [drm] VGA-1
[ 0.665054] [drm] HPD2
[ 0.665055] [drm] DDC: 0x6540 0x6540 0x6544 0x6544 0x6548 0x6548 0x654c 0x654c
[ 0.665056] [drm] Encoders:
[ 0.665058] [drm] CRT1: INTERNAL_UNIPHY2
[ 0.665059] [drm] CRT1: NUTMEG
[ 0.665060] [drm] Connector 2:
[ 0.665061] [drm] HDMI-A-1
[ 0.665062] [drm] HPD3
[ 0.665064] [drm] DDC: 0x6550 0x6550 0x6554 0x6554 0x6558 0x6558 0x655c 0x655c
[ 0.665065] [drm] Encoders:
[ 0.665066] [drm] DFP1: INTERNAL_UNIPHY
[ 1.468198] tsc: Refined TSC clocksource calibration: 2495.461 MHz
[ 1.872435] [drm] fb mappable at 0xE047A000
[ 1.872439] [drm] vram apper at 0xE0000000
[ 1.872441] [drm] size 4325376
[ 1.872442] [drm] fb depth is 24
[ 1.872444] [drm] pitch is 5632
[ 1.872667] fbcon: radeondrmfb (fb0) is primary device
[ 2.467404] Switched to clocksource tsc
[ 3.965036] Console: switching to colour frame buffer device 170x48
[ 3.968028] radeon 0000:00:01.0: fb0: radeondrmfb frame buffer device
[ 3.968030] radeon 0000:00:01.0: registered panic notifier
[ 4.002970] [drm] Initialized radeon 2.40.0 20080528 for 0000:00:01.0 on minor 0
[ 4.003999] i8042: PNP: No PS/2 controller found. Probing ports directly.
[ 4.059869] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 4.059954] serio: i8042 AUX port at 0x60,0x64 irq 12
[ 4.087623] ACPI: bus type USB registered
[ 4.087671] usbcore: registered new interface driver usbfs
[ 4.087698] SCSI subsystem initialized
[ 4.087700] usbcore: registered new interface driver hub
[ 4.091474] usbcore: registered new device driver usb
[ 4.091487] libata version 3.00 loaded.
[ 4.092580] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 4.092780] ahci 0000:00:11.0: version 3.0
[ 4.093095] ahci 0000:00:11.0: AHCI 0001.0300 32 slots 6 ports 6 Gbps 0x3 impl SATA mode
[ 4.093100] ahci 0000:00:11.0: flags: 64bit ncq sntf ilck led clo pio
[ 4.093219] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[ 4.093227] ehci-pci: EHCI PCI platform driver
[ 4.093466] ohci-pci: OHCI PCI platform driver
[ 4.094269] scsi host0: ahci
[ 4.094460] scsi host1: ahci
[ 4.094629] scsi host2: ahci
[ 4.094793] scsi host3: ahci
[ 4.095953] scsi host4: ahci
[ 4.096122] scsi host5: ahci
[ 4.096222] ata1: SATA max UDMA/133 abar m2048@0xf024b000 port 0xf024b100 irq 19
[ 4.096227] ata2: SATA max UDMA/133 abar m2048@0xf024b000 port 0xf024b180 irq 19
[ 4.096229] ata3: DUMMY
[ 4.096231] ata4: DUMMY
[ 4.096233] ata5: DUMMY
[ 4.096583] ata6: DUMMY
[ 4.096803] QUIRK: Enable AMD PLL fix
[ 4.096836] ehci-pci 0000:00:12.2: EHCI Host Controller
[ 4.096845] ehci-pci 0000:00:12.2: new USB bus registered, assigned bus number 1
[ 4.096851] ehci-pci 0000:00:12.2: applying AMD SB700/SB800/Hudson-2/3 EHCI dummy qh workaround
[ 4.096864] ehci-pci 0000:00:12.2: debug port 1
[ 4.096907] ehci-pci 0000:00:12.2: irq 17, io mem 0xf024b800
[ 4.105907] ehci-pci 0000:00:12.2: USB 2.0 started, EHCI 1.00
[ 4.106221] hub 1-0:1.0: USB hub found
[ 4.106235] hub 1-0:1.0: 5 ports detected
[ 4.106781] ehci-pci 0000:00:13.2: EHCI Host Controller
[ 4.106790] ehci-pci 0000:00:13.2: new USB bus registered, assigned bus number 2
[ 4.106796] ehci-pci 0000:00:13.2: applying AMD SB700/SB800/Hudson-2/3 EHCI dummy qh workaround
[ 4.106808] ehci-pci 0000:00:13.2: debug port 1
[ 4.106843] ehci-pci 0000:00:13.2: irq 17, io mem 0xf024b900
[ 4.109352] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input0
[ 4.115975] ehci-pci 0000:00:13.2: USB 2.0 started, EHCI 1.00
[ 4.116284] hub 2-0:1.0: USB hub found
[ 4.116295] hub 2-0:1.0: 5 ports detected
[ 4.116735] ehci-pci 0000:00:16.2: EHCI Host Controller
[ 4.116743] ehci-pci 0000:00:16.2: new USB bus registered, assigned bus number 3
[ 4.116748] ehci-pci 0000:00:16.2: applying AMD SB700/SB800/Hudson-2/3 EHCI dummy qh workaround
[ 4.116758] ehci-pci 0000:00:16.2: debug port 1
[ 4.116793] ehci-pci 0000:00:16.2: irq 17, io mem 0xf024ba00
[ 4.128216] ehci-pci 0000:00:16.2: USB 2.0 started, EHCI 1.00
[ 4.128508] hub 3-0:1.0: USB hub found
[ 4.128518] hub 3-0:1.0: 4 ports detected
[ 4.128999] ohci-pci 0000:00:12.0: OHCI PCI host controller
[ 4.129011] ohci-pci 0000:00:12.0: new USB bus registered, assigned bus number 4
[ 4.129070] ohci-pci 0000:00:12.0: irq 18, io mem 0xf0248000
[ 4.183680] hub 4-0:1.0: USB hub found
[ 4.183693] hub 4-0:1.0: 5 ports detected
[ 4.184072] ohci-pci 0000:00:13.0: OHCI PCI host controller
[ 4.184080] ohci-pci 0000:00:13.0: new USB bus registered, assigned bus number 5
[ 4.184108] ohci-pci 0000:00:13.0: irq 18, io mem 0xf0249000
[ 4.240267] hub 5-0:1.0: USB hub found
[ 4.240281] hub 5-0:1.0: 5 ports detected
[ 4.240664] ohci-pci 0000:00:14.5: OHCI PCI host controller
[ 4.240672] ohci-pci 0000:00:14.5: new USB bus registered, assigned bus number 6
[ 4.240702] ohci-pci 0000:00:14.5: irq 18, io mem 0xf024c000
[ 4.296894] hub 6-0:1.0: USB hub found
[ 4.296908] hub 6-0:1.0: 2 ports detected
[ 4.297222] ohci-pci 0000:00:16.0: OHCI PCI host controller
[ 4.297229] ohci-pci 0000:00:16.0: new USB bus registered, assigned bus number 7
[ 4.297259] ohci-pci 0000:00:16.0: irq 18, io mem 0xf024a000
[ 4.353446] hub 7-0:1.0: USB hub found
[ 4.353460] hub 7-0:1.0: 4 ports detected
[ 4.415731] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[ 4.415765] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[ 4.417430] ata2.00: ATAPI: HL-DT-ST DVDRAM GU70N, DE01, max UDMA/133
[ 4.419449] ata2.00: configured for UDMA/133
[ 4.422228] ata1.00: ATA-8: ST1000LM024 HN-M101MBB, 2AR20002, max UDMA/100
[ 4.422233] ata1.00: 1953525168 sectors, multi 0: LBA48 NCQ (depth 31/32)
[ 4.428751] ata1.00: configured for UDMA/100
[ 4.428995] scsi 0:0:0:0: Direct-Access ATA ST1000LM024 HN-M 0002 PQ: 0 ANSI: 5
[ 4.429710] scsi 1:0:0:0: CD-ROM HL-DT-ST DVDRAM GU70N DE01 PQ: 0 ANSI: 5
[ 4.445943] sd 0:0:0:0: [sda] 1953525168 512-byte logical blocks: (1.00 TB/931 GiB)
[ 4.445948] sd 0:0:0:0: [sda] 4096-byte physical blocks
[ 4.446057] sd 0:0:0:0: [sda] Write Protect is off
[ 4.446061] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 4.446110] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 4.454571] sr 1:0:0:0: [sr0] scsi3-mmc drive: 24x/24x writer dvd-ram cd/rw xa/form2 cdda tray
[ 4.454576] cdrom: Uniform CD-ROM driver Revision: 3.20
[ 4.454825] sr 1:0:0:0: Attached scsi CD-ROM sr0
[ 4.501061] sda: sda1 sda2 sda3 sda4 sda5
[ 4.501693] sd 0:0:0:0: [sda] Attached SCSI disk
[ 4.668928] usb 2-2: new high-speed USB device number 2 using ehci-pci
[ 4.797833] usbcore: registered new interface driver rtsx_usb
[ 4.948682] JFS: nTxBlock = 8192, nTxLock = 65536
[ 5.041902] usb 4-3: new full-speed USB device number 2 using ohci-pci
[ 5.837123] random: nonblocking pool is initialized
[ 7.182379] systemd[1]: Cannot add dependency job for unit cups.socket, ignoring: Unit cups.socket failed to load: No such file or directory.
[ 7.182413] systemd[1]: Cannot add dependency job for unit cups.path, ignoring: Unit cups.path failed to load: No such file or directory.
[ 10.406638] systemd-journald[160]: Received request to flush runtime journal from PID 1
[ 10.644160] ACPI: acpi_idle registered with cpuidle
[ 10.668472] input: Lid Switch as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0D:00/input/input3
[ 10.668513] ACPI: Lid Switch [LID]
[ 10.668582] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input4
[ 10.668586] ACPI: Power Button [PWRB]
[ 10.668654] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input5
[ 10.668657] ACPI: Power Button [PWRF]
[ 10.713804] ACPI: AC Adapter [AC] (on-line)
[ 10.822865] acpi-cpufreq: overriding BIOS provided _PSD data
[ 10.842348] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[ 10.881752] piix4_smbus 0000:00:14.0: SMBus Host Controller at 0xb00, revision 0
[ 10.881840] piix4_smbus 0000:00:14.0: Auxiliary SMBus Host Controller at 0xb20
[ 10.957051] ACPI: Battery Slot [BATX] (battery present)
[ 11.203113] alx 0000:01:00.0 eth0: Qualcomm Atheros AR816x/AR817x Ethernet [20:1a:06:97:15:c5]
[ 11.493513] input: PC Speaker as /devices/platform/pcspkr/input/input6
[ 11.657627] AVX version of gcm_enc/dec engaged.
[ 11.738640] Bluetooth: Core ver 2.19
[ 11.738664] NET: Registered protocol family 31
[ 11.738667] Bluetooth: HCI device and connection manager initialized
[ 11.738677] Bluetooth: HCI socket layer initialized
[ 11.738681] Bluetooth: L2CAP socket layer initialized
[ 11.738692] Bluetooth: SCO socket layer initialized
[ 11.918857] snd_hda_intel: unknown parameter 'vid' ignored
[ 11.918862] snd_hda_intel: unknown parameter 'pid' ignored
[ 11.918866] snd_hda_intel: unknown parameter 'vid' ignored
[ 11.918868] snd_hda_intel: unknown parameter 'pid' ignored
[ 11.919152] snd_hda_intel 0000:00:01.1: Force to non-snoop mode
[ 11.919189] snd_hda_intel 0000:00:01.1: irq 27 for MSI/MSI-X
[ 12.048872] usbcore: registered new interface driver btusb
[ 12.266818] alx 0000:01:00.0 enp1s0: renamed from eth0
[ 12.319719] usb 4-3: USB disconnect, device number 2
[ 12.320777] usbcore: registered new interface driver ath3k
[ 12.412719] cfg80211: Calling CRDA to update world regulatory domain
[ 12.692122] usb 4-3: new full-speed USB device number 3 using ohci-pci
[ 12.781013] input: HDA ATI HDMI HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:01.1/sound/card1/input8
[ 12.781377] input: HDA ATI HDMI HDMI/DP,pcm=7 as /devices/pci0000:00/0000:00:01.1/sound/card1/input9
[ 12.781540] input: HDA ATI HDMI HDMI/DP,pcm=8 as /devices/pci0000:00/0000:00:01.1/sound/card1/input10
[ 12.781686] input: HDA ATI HDMI HDMI/DP,pcm=9 as /devices/pci0000:00/0000:00:01.1/sound/card1/input11
[ 12.846066] kvm: Nested Virtualization enabled
[ 12.846073] kvm: Nested Paging enabled
[ 12.860947] ath: phy0: WB335 2-ANT card detected
[ 12.860952] ath: phy0: Set BT/WLAN RX diversity capability
[ 12.867160] ath: phy0: Enable LNA combining
[ 12.868219] ath: EEPROM regdomain: 0x65
[ 12.868221] ath: EEPROM indicates we should expect a direct regpair map
[ 12.868225] ath: Country alpha2 being used: 00
[ 12.868227] ath: Regpair used: 0x65
[ 12.877129] sound hdaudioC0D0: CX20757: BIOS auto-probing.
[ 12.879318] sound hdaudioC0D0: autoconfig: line_outs=1 (0x17/0x0/0x0/0x0/0x0) type:speaker
[ 12.879323] sound hdaudioC0D0: speaker_outs=0 (0x0/0x0/0x0/0x0/0x0)
[ 12.879327] sound hdaudioC0D0: hp_outs=1 (0x16/0x0/0x0/0x0/0x0)
[ 12.879330] sound hdaudioC0D0: mono: mono_out=0x0
[ 12.879333] sound hdaudioC0D0: inputs:
[ 12.879337] sound hdaudioC0D0: Mic=0x19
[ 12.879340] sound hdaudioC0D0: Internal Mic=0x1a
[ 12.879343] sound hdaudioC0D0: Line=0x18
[ 12.884951] input: HDA Digital PCBeep as /devices/pci0000:00/0000:00:14.2/sound/card0/hdaudioC0D0/input12
[ 12.885742] input: HD-Audio Generic Mic as /devices/pci0000:00/0000:00:14.2/sound/card0/input13
[ 12.885895] input: HD-Audio Generic Line as /devices/pci0000:00/0000:00:14.2/sound/card0/input14
[ 12.886032] input: HD-Audio Generic Headphone as /devices/pci0000:00/0000:00:14.2/sound/card0/input15
[ 12.941978] Adding 4194300k swap on /dev/sda3. Priority:-1 extents:1 across:4194300k FS
[ 13.039700] ieee80211 phy0: Selected rate control algorithm 'minstrel_ht'
[ 13.040464] ieee80211 phy0: Atheros AR9565 Rev:1 mem=0xffffc90003580000, irq=17
[ 13.044687] ath9k 0000:02:00.0 wlp2s0: renamed from wlan0
[ 13.459457] psmouse serio1: elantech: assuming hardware version 3 (with firmware version 0x450f03)
[ 13.500744] psmouse serio1: elantech: Synaptics capabilities query result 0x78, 0x17, 0x0b.
[ 13.719024] input: ETPS/2 Elantech Touchpad as /devices/platform/i8042/serio1/input/input7
[ 13.974822] mousedev: PS/2 mouse device common for all mice
[ 14.568845] SGI XFS with ACLs, security attributes, realtime, no debug enabled
[ 14.787020] XFS (sda4): Mounting V4 Filesystem
[ 14.821206] EXT4-fs (sda5): mounting ext2 file system using the ext4 subsystem
[ 14.822630] EXT4-fs (sda5): mounted filesystem without journal. Opts: errors=remount-ro
[ 15.579600] XFS (sda4): Ending clean mount
[ 22.009900] alx 0000:01:00.0: irq 28 for MSI/MSI-X
[ 22.010070] IPv6: ADDRCONF(NETDEV_UP): enp1s0: link is not ready
[ 22.010856] alx 0000:01:00.0 enp1s0: NIC Up: 100 Mbps Full
[ 22.012316] IPv6: ADDRCONF(NETDEV_CHANGE): enp1s0: link becomes ready
[ 22.027447] IPv6: ADDRCONF(NETDEV_UP): wlp2s0: link is not ready
[ 62.698558] fuse init (API version 7.23)