blob: e460236be664f007898cc688b42920e1c8ee4149 [file] [log] [blame]
[ 0.000000] Linux version 6.4.11-arch1-1 (linux@archlinux) (gcc (GCC) 13.2.1 20230801, GNU ld (GNU Binutils) 2.41.0) #1 SMP PREEMPT_DYNAMIC Wed, 16 Aug 2023 22:44:10 +0000
[ 0.000000] Command line: BOOT_IMAGE=../vmlinuz-linux root=/dev/sda1 rw quiet nowatchdog module_blacklist=iTCO_wdt libahci.ignore_sss=1 iomem=relaxed initrd=../intel-ucode.img,../initramfs-linux-minimal.img
[ 0.000000] BIOS-provided physical RAM map:
[ 0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009fbff] usable
[ 0.000000] BIOS-e820: [mem 0x000000000009fc00-0x000000000009ffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000000f0000-0x00000000000fffff] reserved
[ 0.000000] BIOS-e820: [mem 0x0000000000100000-0x000000007d740fff] usable
[ 0.000000] BIOS-e820: [mem 0x000000007d741000-0x000000007fffffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000f0000000-0x00000000f3ffffff] reserved
[ 0.000000] BIOS-e820: [mem 0x0000000100000000-0x000000017fffffff] usable
[ 0.000000] NX (Execute Disable) protection: active
[ 0.000000] SMBIOS 3.0.0 present.
[ 0.000000] DMI: Dell Inc. Latitude E6400/Latitude E6400, BIOS 4.20-1205-g52fb64be42f3 08/20/2023
[ 0.000000] tsc: Fast TSC calibration using PIT
[ 0.000000] tsc: Detected 2657.888 MHz processor
[ 0.001492] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
[ 0.001499] e820: remove [mem 0x000a0000-0x000fffff] usable
[ 0.001508] last_pfn = 0x180000 max_arch_pfn = 0x400000000
[ 0.001521] x86/PAT: Configuration [0-7]: WB WC UC- UC WB WP UC- WT
[ 0.002820] last_pfn = 0x7d741 max_arch_pfn = 0x400000000
[ 0.022579] RAMDISK: [mem 0x7cad9000-0x7d740fff]
[ 0.022589] ACPI: Early table checksum verification disabled
[ 0.022596] ACPI: RSDP 0x00000000000F6770 000024 (v02 COREv4)
[ 0.022604] ACPI: XSDT 0x000000007D74D0E0 000054 (v01 COREv4 COREBOOT 00000000 CORE 20230628)
[ 0.022616] ACPI: FACP 0x000000007D74F630 000114 (v06 COREv4 COREBOOT 00000000 CORE 20230628)
[ 0.022627] ACPI: DSDT 0x000000007D74D280 0023AD (v02 COREv4 COREBOOT 20090419 INTL 20230628)
[ 0.022635] ACPI: FACS 0x000000007D74D240 000040
[ 0.022641] ACPI: FACS 0x000000007D74D240 000040
[ 0.022648] ACPI: SSDT 0x000000007D74F750 000950 (v02 COREv4 COREBOOT 00000000 CORE 20230628)
[ 0.022655] ACPI: MCFG 0x000000007D7500A0 00003C (v01 COREv4 COREBOOT 00000000 CORE 20230628)
[ 0.022662] ACPI: APIC 0x000000007D7500E0 000062 (v03 COREv4 COREBOOT 00000000 CORE 20230628)
[ 0.022669] ACPI: DMAR 0x000000007D750150 000078 (v01 COREv4 COREBOOT 00000000 CORE 20230628)
[ 0.022677] ACPI: HPET 0x000000007D7501D0 000038 (v01 COREv4 COREBOOT 00000000 CORE 20230628)
[ 0.022683] ACPI: Reserving FACP table memory at [mem 0x7d74f630-0x7d74f743]
[ 0.022686] ACPI: Reserving DSDT table memory at [mem 0x7d74d280-0x7d74f62c]
[ 0.022688] ACPI: Reserving FACS table memory at [mem 0x7d74d240-0x7d74d27f]
[ 0.022690] ACPI: Reserving FACS table memory at [mem 0x7d74d240-0x7d74d27f]
[ 0.022692] ACPI: Reserving SSDT table memory at [mem 0x7d74f750-0x7d75009f]
[ 0.022694] ACPI: Reserving MCFG table memory at [mem 0x7d7500a0-0x7d7500db]
[ 0.022696] ACPI: Reserving APIC table memory at [mem 0x7d7500e0-0x7d750141]
[ 0.022698] ACPI: Reserving DMAR table memory at [mem 0x7d750150-0x7d7501c7]
[ 0.022700] ACPI: Reserving HPET table memory at [mem 0x7d7501d0-0x7d750207]
[ 0.022799] No NUMA configuration found
[ 0.022800] Faking a node at [mem 0x0000000000000000-0x000000017fffffff]
[ 0.022806] NODE_DATA(0) allocated [mem 0x17fff9000-0x17fffdfff]
[ 0.022849] Zone ranges:
[ 0.022850] DMA [mem 0x0000000000001000-0x0000000000ffffff]
[ 0.022854] DMA32 [mem 0x0000000001000000-0x00000000ffffffff]
[ 0.022858] Normal [mem 0x0000000100000000-0x000000017fffffff]
[ 0.022861] Device empty
[ 0.022863] Movable zone start for each node
[ 0.022865] Early memory node ranges
[ 0.022866] node 0: [mem 0x0000000000001000-0x000000000009efff]
[ 0.022869] node 0: [mem 0x0000000000100000-0x000000007d740fff]
[ 0.022871] node 0: [mem 0x0000000100000000-0x000000017fffffff]
[ 0.022875] Initmem setup node 0 [mem 0x0000000000001000-0x000000017fffffff]
[ 0.022884] On node 0, zone DMA: 1 pages in unavailable ranges
[ 0.022949] On node 0, zone DMA: 97 pages in unavailable ranges
[ 0.056324] On node 0, zone Normal: 10431 pages in unavailable ranges
[ 0.056339] Reserving Intel graphics memory at [mem 0x7e000000-0x7fffffff]
[ 0.056717] ACPI: PM-Timer IO Port: 0x508
[ 0.056734] ACPI: LAPIC_NMI (acpi_id[0xff] high edge lint[0x1])
[ 0.056753] IOAPIC[0]: apic_id 0, version 32, address 0xfec00000, GSI 0-23
[ 0.056760] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 high edge)
[ 0.056764] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[ 0.056773] ACPI: Using ACPI (MADT) for SMP configuration information
[ 0.056775] ACPI: HPET id: 0x8086a301 base: 0xfed00000
[ 0.056785] smpboot: Allowing 2 CPUs, 0 hotplug CPUs
[ 0.056803] PM: hibernation: Registered nosave memory: [mem 0x00000000-0x00000fff]
[ 0.056807] PM: hibernation: Registered nosave memory: [mem 0x0009f000-0x0009ffff]
[ 0.056809] PM: hibernation: Registered nosave memory: [mem 0x000a0000-0x000effff]
[ 0.056811] PM: hibernation: Registered nosave memory: [mem 0x000f0000-0x000fffff]
[ 0.056814] PM: hibernation: Registered nosave memory: [mem 0x7d741000-0x7fffffff]
[ 0.056816] PM: hibernation: Registered nosave memory: [mem 0x80000000-0xefffffff]
[ 0.056818] PM: hibernation: Registered nosave memory: [mem 0xf0000000-0xf3ffffff]
[ 0.056820] PM: hibernation: Registered nosave memory: [mem 0xf4000000-0xffffffff]
[ 0.056824] [mem 0x80000000-0xefffffff] available for PCI devices
[ 0.056826] Booting paravirtualized kernel on bare hardware
[ 0.056832] clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 6370452778343963 ns
[ 0.069734] setup_percpu: NR_CPUS:320 nr_cpumask_bits:2 nr_cpu_ids:2 nr_node_ids:1
[ 0.070597] percpu: Embedded 64 pages/cpu s225280 r8192 d28672 u1048576
[ 0.070607] pcpu-alloc: s225280 r8192 d28672 u1048576 alloc=1*2097152
[ 0.070613] pcpu-alloc: [0] 0 1
[ 0.070645] Kernel command line: BOOT_IMAGE=../vmlinuz-linux root=/dev/sda1 rw quiet nowatchdog module_blacklist=iTCO_wdt libahci.ignore_sss=1 iomem=relaxed initrd=../intel-ucode.img,../initramfs-linux-minimal.img
[ 0.070864] Unknown kernel command line parameters "BOOT_IMAGE=../vmlinuz-linux", will be passed to user space.
[ 0.072678] Dentry cache hash table entries: 524288 (order: 10, 4194304 bytes, linear)
[ 0.073763] Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes, linear)
[ 0.073865] Fallback order for Node 0: 0
[ 0.073874] Built 1 zonelists, mobility grouping on. Total pages: 1021667
[ 0.073880] Policy zone: Normal
[ 0.074915] mem auto-init: stack:all(zero), heap alloc:on, heap free:off
[ 0.074937] software IO TLB: area num 2.
[ 0.179113] Memory: 3952840K/4152188K available (16384K kernel code, 2120K rwdata, 12780K rodata, 3352K init, 3980K bss, 199088K reserved, 0K cma-reserved)
[ 0.179767] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=2, Nodes=1
[ 0.179811] Kernel/User page tables isolation: enabled
[ 0.179915] ftrace: allocating 47559 entries in 186 pages
[ 0.195893] ftrace: allocated 186 pages with 5 groups
[ 0.196136] Dynamic Preempt: full
[ 0.196208] rcu: Preemptible hierarchical RCU implementation.
[ 0.196210] rcu: RCU restricting CPUs from NR_CPUS=320 to nr_cpu_ids=2.
[ 0.196212] rcu: RCU priority boosting: priority 1 delay 500 ms.
[ 0.196215] Trampoline variant of Tasks RCU enabled.
[ 0.196216] Rude variant of Tasks RCU enabled.
[ 0.196217] Tracing variant of Tasks RCU enabled.
[ 0.196219] rcu: RCU calculated value of scheduler-enlistment delay is 30 jiffies.
[ 0.196220] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=2
[ 0.204113] NR_IRQS: 20736, nr_irqs: 440, preallocated irqs: 16
[ 0.204351] rcu: srcu_init: Setting srcu_struct sizes based on contention.
[ 0.204564] kfence: initialized - using 2097152 bytes for 255 objects at 0x(____ptrval____)-0x(____ptrval____)
[ 0.204856] Console: colour dummy device 80x25
[ 0.204861] printk: console [tty0] enabled
[ 0.204952] ACPI: Core revision 20230331
[ 0.205071] clocksource: hpet: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 133484882848 ns
[ 0.205093] APIC: Switch to symmetric I/O mode setup
[ 0.205097] DMAR: Host address width 36
[ 0.205099] DMAR: DRHD base: 0x000000fed90000 flags: 0x0
[ 0.205111] DMAR: dmar0: reg_base_addr fed90000 ver 1:0 cap c9008020e30260 ecap 1000
[ 0.205116] DMAR: DRHD base: 0x000000fed91000 flags: 0x0
[ 0.205124] DMAR: dmar1: reg_base_addr fed91000 ver 1:0 cap c0000020630260 ecap 1000
[ 0.205128] DMAR: DRHD base: 0x000000fed93000 flags: 0x1
[ 0.205148] DMAR: dmar2: reg_base_addr fed93000 ver 1:0 cap c9008020630260 ecap 1000
[ 0.205546] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=0 pin2=0
[ 0.221761] clocksource: tsc-early: mask: 0xffffffffffffffff max_cycles: 0x264fd8ea750, max_idle_ns: 440795337845 ns
[ 0.221770] Calibrating delay loop (skipped), value calculated using timer frequency.. 5317.26 BogoMIPS (lpj=8859626)
[ 0.221805] CPU0: Thermal monitoring enabled (TM2)
[ 0.221824] process: using mwait in idle threads
[ 0.221832] Last level iTLB entries: 4KB 128, 2MB 4, 4MB 4
[ 0.221835] Last level dTLB entries: 4KB 256, 2MB 0, 4MB 32, 1GB 0
[ 0.221841] Spectre V1 : Mitigation: usercopy/swapgs barriers and __user pointer sanitization
[ 0.221846] Spectre V2 : Mitigation: Retpolines
[ 0.221848] Spectre V2 : Spectre v2 / SpectreRSB mitigation: Filling RSB on context switch
[ 0.221850] Spectre V2 : Spectre v2 / SpectreRSB : Filling RSB on VMEXIT
[ 0.221852] Speculative Store Bypass: Vulnerable
[ 0.221858] MDS: Vulnerable: Clear CPU buffers attempted, no microcode
[ 0.221859] MMIO Stale Data: Unknown: No mitigations
[ 0.221867] x86/fpu: Supporting XSAVE feature 0x001: 'x87 floating point registers'
[ 0.221869] x86/fpu: Supporting XSAVE feature 0x002: 'SSE registers'
[ 0.221872] x86/fpu: Enabled xstate features 0x3, context size is 576 bytes, using 'standard' format.
[ 0.257186] Freeing SMP alternatives memory: 40K
[ 0.257196] pid_max: default: 32768 minimum: 301
[ 0.257343] LSM: initializing lsm=capability,landlock,lockdown,yama,bpf,integrity
[ 0.257383] landlock: Up and running.
[ 0.257385] Yama: becoming mindful.
[ 0.257396] LSM support for eBPF active
[ 0.257500] Mount-cache hash table entries: 8192 (order: 4, 65536 bytes, linear)
[ 0.257522] Mountpoint-cache hash table entries: 8192 (order: 4, 65536 bytes, linear)
[ 0.364991] smpboot: CPU0: Intel(R) Core(TM)2 Duo CPU P8800 @ 2.66GHz (family: 0x6, model: 0x17, stepping: 0xa)
[ 0.365100] cblist_init_generic: Setting adjustable number of callback queues.
[ 0.365100] cblist_init_generic: Setting shift to 1 and lim to 1.
[ 0.365100] cblist_init_generic: Setting adjustable number of callback queues.
[ 0.365100] cblist_init_generic: Setting shift to 1 and lim to 1.
[ 0.365100] cblist_init_generic: Setting adjustable number of callback queues.
[ 0.365100] cblist_init_generic: Setting shift to 1 and lim to 1.
[ 0.365100] Performance Events: PEBS fmt0+, Core2 events, 4-deep LBR, Intel PMU driver.
[ 0.365100] ... version: 2
[ 0.365100] ... bit width: 40
[ 0.365100] ... generic registers: 2
[ 0.365100] ... value mask: 000000ffffffffff
[ 0.365100] ... max period: 000000007fffffff
[ 0.365100] ... fixed-purpose events: 3
[ 0.365100] ... event mask: 0000000700000003
[ 0.365100] signal: max sigframe size: 1520
[ 0.365100] rcu: Hierarchical SRCU implementation.
[ 0.365100] rcu: Max phase no-delay instances is 1000.
[ 0.365100] smp: Bringing up secondary CPUs ...
[ 0.365100] x86: Booting SMP configuration:
[ 0.365100] .... node #0, CPUs: #1
[ 0.368479] smp: Brought up 1 node, 2 CPUs
[ 0.368479] smpboot: Max logical packages: 1
[ 0.368479] smpboot: Total of 2 processors activated (10635.53 BogoMIPS)
[ 0.372384] devtmpfs: initialized
[ 0.372384] x86/mm: Memory block size: 128MB
[ 0.373030] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 6370867519511994 ns
[ 0.373030] futex hash table entries: 512 (order: 3, 32768 bytes, linear)
[ 0.373030] pinctrl core: initialized pinctrl subsystem
[ 0.373030] PM: RTC time: 01:34:12, date: 2023-06-25
[ 0.376266] NET: Registered PF_NETLINK/PF_ROUTE protocol family
[ 0.376703] DMA: preallocated 512 KiB GFP_KERNEL pool for atomic allocations
[ 0.376886] DMA: preallocated 512 KiB GFP_KERNEL|GFP_DMA pool for atomic allocations
[ 0.377073] DMA: preallocated 512 KiB GFP_KERNEL|GFP_DMA32 pool for atomic allocations
[ 0.377131] audit: initializing netlink subsys (disabled)
[ 0.377286] audit: type=2000 audit(1687656852.169:1): state=initialized audit_enabled=0 res=1
[ 0.377544] thermal_sys: Registered thermal governor 'fair_share'
[ 0.377548] thermal_sys: Registered thermal governor 'bang_bang'
[ 0.377550] thermal_sys: Registered thermal governor 'step_wise'
[ 0.377552] thermal_sys: Registered thermal governor 'user_space'
[ 0.377553] thermal_sys: Registered thermal governor 'power_allocator'
[ 0.377585] cpuidle: using governor ladder
[ 0.377596] cpuidle: using governor menu
[ 0.377725] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
[ 0.377933] PCI: MMCONFIG for domain 0000 [bus 00-3f] at [mem 0xf0000000-0xf3ffffff] (base 0xf0000000)
[ 0.377943] PCI: MMCONFIG at [mem 0xf0000000-0xf3ffffff] reserved as E820 entry
[ 0.377964] PCI: Using configuration type 1 for base access
[ 0.378302] kprobes: kprobe jump-optimization is enabled. All kprobes are optimized if possible.
[ 0.395378] HugeTLB: registered 2.00 MiB page size, pre-allocated 0 pages
[ 0.395383] HugeTLB: 28 KiB vmemmap can be freed for a 2.00 MiB page
[ 0.396329] ACPI: Added _OSI(Module Device)
[ 0.396333] ACPI: Added _OSI(Processor Device)
[ 0.396336] ACPI: Added _OSI(3.0 _SCP Extensions)
[ 0.396338] ACPI: Added _OSI(Processor Aggregator Device)
[ 0.399840] ACPI: 2 ACPI AML tables successfully acquired and loaded
[ 0.401136] ACPI: Interpreter enabled
[ 0.401169] ACPI: PM: (supports S0 S1 S3 S4 S5)
[ 0.401172] ACPI: Using IOAPIC for interrupt routing
[ 0.401660] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
[ 0.401663] PCI: Ignoring E820 reservations for host bridge windows
[ 0.401911] ACPI: Enabled 1 GPEs in block 00 to 3F
[ 0.409295] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-3f])
[ 0.409308] acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI EDR HPX-Type3]
[ 0.409375] acpi PNP0A08:00: _OSC: OS now controls [PCIeHotplug SHPCHotplug PME AER PCIeCapability LTR DPC]
[ 0.409588] acpi PNP0A08:00: ignoring host bridge window [mem 0x000c4000-0x000c7fff window] (conflicts with Video ROM [mem 0x000c0000-0x000c6dff])
[ 0.410167] PCI host bridge to bus 0000:00
[ 0.410171] pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7 window]
[ 0.410176] pci_bus 0000:00: root bus resource [io 0x0d00-0xffff window]
[ 0.410179] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000c3fff window]
[ 0.410183] pci_bus 0000:00: root bus resource [mem 0x000c8000-0x000fffff window]
[ 0.410186] pci_bus 0000:00: root bus resource [mem 0x80000000-0xfebfffff window]
[ 0.410189] pci_bus 0000:00: root bus resource [mem 0x180000000-0xfffffffff window]
[ 0.410192] pci_bus 0000:00: root bus resource [mem 0xfed40000-0xfed44fff window]
[ 0.410195] pci_bus 0000:00: root bus resource [bus 00-3f]
[ 0.410228] pci 0000:00:00.0: [8086:2a40] type 00 class 0x060000
[ 0.410260] pci 0000:00:00.0: DMAR: Disabling IOMMU for graphics on this chipset
[ 0.410263] pci 0000:00:00.0: DMAR: Forcing write-buffer flush capability
[ 0.410436] pci 0000:00:02.0: [8086:2a42] type 00 class 0x030000
[ 0.410451] pci 0000:00:02.0: reg 0x10: [mem 0xfdc00000-0xfdffffff 64bit]
[ 0.410461] pci 0000:00:02.0: reg 0x18: [mem 0xe0000000-0xefffffff 64bit pref]
[ 0.410469] pci 0000:00:02.0: reg 0x20: [io 0xcef8-0xceff]
[ 0.410490] pci 0000:00:02.0: Video device with shadowed ROM at [mem 0x000c0000-0x000dffff]
[ 0.410643] pci 0000:00:02.1: [8086:2a43] type 00 class 0x038000
[ 0.410657] pci 0000:00:02.1: reg 0x10: [mem 0xf9200000-0xf92fffff 64bit]
[ 0.410825] pci 0000:00:19.0: [8086:10f5] type 00 class 0x020000
[ 0.410848] pci 0000:00:19.0: reg 0x10: [mem 0xf90e0000-0xf90fffff]
[ 0.410861] pci 0000:00:19.0: reg 0x14: [mem 0xf90db000-0xf90dbfff]
[ 0.410874] pci 0000:00:19.0: reg 0x18: [io 0xcfe0-0xcfff]
[ 0.410969] pci 0000:00:19.0: PME# supported from D0 D3hot D3cold
[ 0.411081] pci 0000:00:1a.0: [8086:2937] type 00 class 0x0c0300
[ 0.411143] pci 0000:00:1a.0: reg 0x20: [io 0xcfc0-0xcfdf]
[ 0.411349] pci 0000:00:1a.1: [8086:2938] type 00 class 0x0c0300
[ 0.411411] pci 0000:00:1a.1: reg 0x20: [io 0xcfa0-0xcfbf]
[ 0.411618] pci 0000:00:1a.2: [8086:2939] type 00 class 0x0c0300
[ 0.411680] pci 0000:00:1a.2: reg 0x20: [io 0xcf80-0xcf9f]
[ 0.411898] pci 0000:00:1a.7: [8086:293c] type 00 class 0x0c0320
[ 0.411922] pci 0000:00:1a.7: reg 0x10: [mem 0xf90d9000-0xf90d93ff]
[ 0.412038] pci 0000:00:1a.7: PME# supported from D0 D3hot D3cold
[ 0.412213] pci 0000:00:1b.0: [8086:293e] type 00 class 0x040300
[ 0.412242] pci 0000:00:1b.0: reg 0x10: [mem 0xf90dc000-0xf90dffff 64bit]
[ 0.412368] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
[ 0.412578] pci 0000:00:1c.0: [8086:2940] type 01 class 0x060400
[ 0.412705] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
[ 0.412909] pci 0000:00:1c.1: [8086:2942] type 01 class 0x060400
[ 0.413043] pci 0000:00:1c.1: PME# supported from D0 D3hot D3cold
[ 0.413244] pci 0000:00:1c.2: [8086:2944] type 01 class 0x060400
[ 0.413370] pci 0000:00:1c.2: PME# supported from D0 D3hot D3cold
[ 0.413564] pci 0000:00:1c.3: [8086:2946] type 01 class 0x060400
[ 0.413697] pci 0000:00:1c.3: PME# supported from D0 D3hot D3cold
[ 0.413896] pci 0000:00:1d.0: [8086:2934] type 00 class 0x0c0300
[ 0.413959] pci 0000:00:1d.0: reg 0x20: [io 0xcf60-0xcf7f]
[ 0.414159] pci 0000:00:1d.1: [8086:2935] type 00 class 0x0c0300
[ 0.414223] pci 0000:00:1d.1: reg 0x20: [io 0xcf40-0xcf5f]
[ 0.414428] pci 0000:00:1d.2: [8086:2936] type 00 class 0x0c0300
[ 0.414490] pci 0000:00:1d.2: reg 0x20: [io 0xcf20-0xcf3f]
[ 0.414701] pci 0000:00:1d.7: [8086:293a] type 00 class 0x0c0320
[ 0.414724] pci 0000:00:1d.7: reg 0x10: [mem 0xf90d8000-0xf90d83ff]
[ 0.414839] pci 0000:00:1d.7: PME# supported from D0 D3hot D3cold
[ 0.415024] pci 0000:00:1e.0: [8086:2448] type 01 class 0x060401
[ 0.415276] pci 0000:00:1f.0: [8086:2917] type 00 class 0x060100
[ 0.415642] pci 0000:00:1f.2: [8086:2929] type 00 class 0x010601
[ 0.415665] pci 0000:00:1f.2: reg 0x10: [io 0xcef0-0xcef7]
[ 0.415679] pci 0000:00:1f.2: reg 0x14: [io 0xcee4-0xcee7]
[ 0.415691] pci 0000:00:1f.2: reg 0x18: [io 0xcee8-0xceef]
[ 0.415704] pci 0000:00:1f.2: reg 0x1c: [io 0xcee0-0xcee3]
[ 0.415717] pci 0000:00:1f.2: reg 0x20: [io 0xcf00-0xcf1f]
[ 0.415730] pci 0000:00:1f.2: reg 0x24: [mem 0xf90da000-0xf90da7ff]
[ 0.415801] pci 0000:00:1f.2: PME# supported from D3hot
[ 0.415964] pci 0000:00:1f.3: [8086:2930] type 00 class 0x0c0500
[ 0.415993] pci 0000:00:1f.3: reg 0x10: [mem 0xf90d7000-0xf90d70ff 64bit]
[ 0.416027] pci 0000:00:1f.3: reg 0x20: [io 0x0400-0x041f]
[ 0.416238] pci 0000:00:1c.0: PCI bridge to [bus 01]
[ 0.416370] pci 0000:02:00.0: [8086:4232] type 00 class 0x028000
[ 0.416423] pci 0000:02:00.0: reg 0x10: [mem 0xf9100000-0xf9101fff 64bit]
[ 0.416657] pci 0000:02:00.0: PME# supported from D0 D3hot D3cold
[ 0.425140] pci 0000:00:1c.1: PCI bridge to [bus 02]
[ 0.425151] pci 0000:00:1c.1: bridge window [mem 0xf9100000-0xf91fffff]
[ 0.425229] pci 0000:00:1c.2: PCI bridge to [bus 03]
[ 0.425352] acpiphp: Slot [1] registered
[ 0.425361] pci 0000:00:1c.3: PCI bridge to [bus 04-0c]
[ 0.425367] pci 0000:00:1c.3: bridge window [io 0xd000-0xdfff]
[ 0.425374] pci 0000:00:1c.3: bridge window [mem 0xf9300000-0xf9afffff]
[ 0.425382] pci 0000:00:1c.3: bridge window [mem 0xff0000000-0xfffffffff 64bit pref]
[ 0.425412] pci_bus 0000:0d: extended config space not accessible
[ 0.425548] pci 0000:0d:01.0: proprietary Ricoh MMC controller disabled (via CardBus function)
[ 0.425552] pci 0000:0d:01.0: MMC cards are now supported by standard SDHCI controller
[ 0.425555] pci 0000:0d:01.0: [1180:0476] type 02 class 0x060700
[ 0.425579] pci 0000:0d:01.0: reg 0x10: [mem 0xfdb00000-0xfdb00fff]
[ 0.425626] pci 0000:0d:01.0: supports D1 D2
[ 0.425629] pci 0000:0d:01.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.425784] pci 0000:0d:01.1: [1180:0832] type 00 class 0x0c0010
[ 0.425808] pci 0000:0d:01.1: reg 0x10: [mem 0xfdb01000-0xfdb017ff]
[ 0.425918] pci 0000:0d:01.1: supports D1 D2
[ 0.425921] pci 0000:0d:01.1: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.426010] pci 0000:0d:01.2: [1180:0822] type 00 class 0x080500
[ 0.426033] pci 0000:0d:01.2: reg 0x10: [mem 0xfdb02000-0xfdb020ff]
[ 0.426143] pci 0000:0d:01.2: supports D1 D2
[ 0.426145] pci 0000:0d:01.2: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.426302] pci 0000:00:1e.0: PCI bridge to [bus 0d-0e] (subtractive decode)
[ 0.426309] pci 0000:00:1e.0: bridge window [io 0xe000-0xffff]
[ 0.426315] pci 0000:00:1e.0: bridge window [mem 0xfbb00000-0xfdbfffff]
[ 0.426323] pci 0000:00:1e.0: bridge window [mem 0xf9b00000-0xfbafffff 64bit pref]
[ 0.426327] pci 0000:00:1e.0: bridge window [io 0x0000-0x0cf7 window] (subtractive decode)
[ 0.426331] pci 0000:00:1e.0: bridge window [io 0x0d00-0xffff window] (subtractive decode)
[ 0.426334] pci 0000:00:1e.0: bridge window [mem 0x000a0000-0x000c3fff window] (subtractive decode)
[ 0.426337] pci 0000:00:1e.0: bridge window [mem 0x000c8000-0x000fffff window] (subtractive decode)
[ 0.426340] pci 0000:00:1e.0: bridge window [mem 0x80000000-0xfebfffff window] (subtractive decode)
[ 0.426343] pci 0000:00:1e.0: bridge window [mem 0x180000000-0xfffffffff window] (subtractive decode)
[ 0.426346] pci 0000:00:1e.0: bridge window [mem 0xfed40000-0xfed44fff window] (subtractive decode)
[ 0.426379] pci_bus 0000:0e: extended config space not accessible
[ 0.426406] pci_bus 0000:0e: busn_res: [bus 0e] end can not be updated to 11
[ 0.426414] pci 0000:00:1e.0: bridge has subordinate 0e but max busn 11
[ 0.426758] ACPI: PCI: Interrupt link LNKA configured for IRQ 11
[ 0.426874] ACPI: PCI: Interrupt link LNKB configured for IRQ 3
[ 0.426986] ACPI: PCI: Interrupt link LNKC configured for IRQ 11
[ 0.427098] ACPI: PCI: Interrupt link LNKD configured for IRQ 10
[ 0.427209] ACPI: PCI: Interrupt link LNKE configured for IRQ 0
[ 0.427212] ACPI: PCI: Interrupt link LNKE disabled
[ 0.427321] ACPI: PCI: Interrupt link LNKF configured for IRQ 0
[ 0.427325] ACPI: PCI: Interrupt link LNKF disabled
[ 0.427434] ACPI: PCI: Interrupt link LNKG configured for IRQ 0
[ 0.427437] ACPI: PCI: Interrupt link LNKG disabled
[ 0.427547] ACPI: PCI: Interrupt link LNKH configured for IRQ 0
[ 0.427550] ACPI: PCI: Interrupt link LNKH disabled
[ 0.428312] iommu: Default domain type: Translated
[ 0.428316] iommu: DMA domain TLB invalidation policy: lazy mode
[ 0.428719] SCSI subsystem initialized
[ 0.428812] libata version 3.00 loaded.
[ 0.428822] ACPI: bus type USB registered
[ 0.428844] usbcore: registered new interface driver usbfs
[ 0.428856] usbcore: registered new interface driver hub
[ 0.428875] usbcore: registered new device driver usb
[ 0.428922] pps_core: LinuxPPS API ver. 1 registered
[ 0.428924] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it>
[ 0.428930] PTP clock support registered
[ 0.428951] EDAC MC: Ver: 3.0.0
[ 0.429737] NetLabel: Initializing
[ 0.429740] NetLabel: domain hash size = 128
[ 0.429742] NetLabel: protocols = UNLABELED CIPSOv4 CALIPSO
[ 0.429773] NetLabel: unlabeled traffic allowed by default
[ 0.429782] mctp: management component transport protocol core
[ 0.429784] NET: Registered PF_MCTP protocol family
[ 0.429792] PCI: Using ACPI for IRQ routing
[ 0.432278] PCI: pci_cache_line_size set to 64 bytes
[ 0.432374] e820: reserve RAM buffer [mem 0x0009fc00-0x0009ffff]
[ 0.432378] e820: reserve RAM buffer [mem 0x7d741000-0x7fffffff]
[ 0.432416] pci 0000:00:02.0: vgaarb: setting as boot VGA device
[ 0.432416] pci 0000:00:02.0: vgaarb: bridge control possible
[ 0.432416] pci 0000:00:02.0: vgaarb: VGA device added: decodes=io+mem,owns=io+mem,locks=none
[ 0.432416] vgaarb: loaded
[ 0.434372] hpet: 4 channels of 0 reserved for per-cpu timers
[ 0.434381] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0
[ 0.434391] hpet0: 4 comparators, 64-bit 14.318180 MHz counter
[ 0.436291] clocksource: Switched to clocksource tsc-early
[ 0.460526] VFS: Disk quotas dquot_6.6.0
[ 0.460558] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[ 0.460715] pnp: PnP ACPI init
[ 0.460889] system 00:00: [mem 0xf0000000-0xf3ffffff] has been reserved
[ 0.461053] system 00:01: [mem 0xfed1c000-0xfed1ffff] has been reserved
[ 0.461058] system 00:01: [mem 0xfed14000-0xfed17fff] has been reserved
[ 0.461063] system 00:01: [mem 0xfed18000-0xfed18fff] has been reserved
[ 0.461067] system 00:01: [mem 0xfed19000-0xfed19fff] has been reserved
[ 0.461071] system 00:01: [mem 0xfed20000-0xfed3ffff] has been reserved
[ 0.461075] system 00:01: [mem 0xfed40000-0xfed44fff] has been reserved
[ 0.461080] system 00:01: [mem 0xfed45000-0xfed8ffff] has been reserved
[ 0.461608] system 00:02: [mem 0xfed00000-0xfed003ff] has been reserved
[ 0.461717] system 00:03: [io 0x0500-0x057f] has been reserved
[ 0.461722] system 00:03: [io 0x0580-0x05bf] has been reserved
[ 0.461935] pnp: PnP ACPI: found 7 devices
[ 0.469712] clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns
[ 0.469865] NET: Registered PF_INET protocol family
[ 0.470078] IP idents hash table entries: 65536 (order: 7, 524288 bytes, linear)
[ 0.472626] tcp_listen_portaddr_hash hash table entries: 2048 (order: 3, 32768 bytes, linear)
[ 0.472732] Table-perturb hash table entries: 65536 (order: 6, 262144 bytes, linear)
[ 0.472829] TCP established hash table entries: 32768 (order: 6, 262144 bytes, linear)
[ 0.473270] TCP bind hash table entries: 32768 (order: 8, 1048576 bytes, linear)
[ 0.473507] TCP: Hash tables configured (established 32768 bind 32768)
[ 0.473709] MPTCP token hash table entries: 4096 (order: 4, 98304 bytes, linear)
[ 0.473779] UDP hash table entries: 2048 (order: 4, 65536 bytes, linear)
[ 0.473823] UDP-Lite hash table entries: 2048 (order: 4, 65536 bytes, linear)
[ 0.473923] NET: Registered PF_UNIX/PF_LOCAL protocol family
[ 0.473940] NET: Registered PF_XDP protocol family
[ 0.473987] pci 0000:00:1c.0: PCI bridge to [bus 01]
[ 0.474007] pci 0000:00:1c.1: PCI bridge to [bus 02]
[ 0.474014] pci 0000:00:1c.1: bridge window [mem 0xf9100000-0xf91fffff]
[ 0.474027] pci 0000:00:1c.2: PCI bridge to [bus 03]
[ 0.474042] pci 0000:00:1c.3: PCI bridge to [bus 04-0c]
[ 0.474046] pci 0000:00:1c.3: bridge window [io 0xd000-0xdfff]
[ 0.474053] pci 0000:00:1c.3: bridge window [mem 0xf9300000-0xf9afffff]
[ 0.474059] pci 0000:00:1c.3: bridge window [mem 0xff0000000-0xfffffffff 64bit pref]
[ 0.474076] pci 0000:0d:01.0: BAR 15: assigned [mem 0x80000000-0x83ffffff pref]
[ 0.474081] pci 0000:0d:01.0: BAR 16: assigned [mem 0x84000000-0x87ffffff]
[ 0.474084] pci 0000:0d:01.0: BAR 13: assigned [io 0xe000-0xe0ff]
[ 0.474087] pci 0000:0d:01.0: BAR 14: assigned [io 0xe400-0xe4ff]
[ 0.474091] pci 0000:0d:01.0: CardBus bridge to [bus 0e]
[ 0.474094] pci 0000:0d:01.0: bridge window [io 0xe000-0xe0ff]
[ 0.474100] pci 0000:0d:01.0: bridge window [io 0xe400-0xe4ff]
[ 0.474105] pci 0000:0d:01.0: bridge window [mem 0x80000000-0x83ffffff pref]
[ 0.474111] pci 0000:0d:01.0: bridge window [mem 0x84000000-0x87ffffff]
[ 0.474117] pci 0000:00:1e.0: PCI bridge to [bus 0d-0e]
[ 0.474121] pci 0000:00:1e.0: bridge window [io 0xe000-0xffff]
[ 0.474128] pci 0000:00:1e.0: bridge window [mem 0xfbb00000-0xfdbfffff]
[ 0.474133] pci 0000:00:1e.0: bridge window [mem 0xf9b00000-0xfbafffff 64bit pref]
[ 0.474143] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7 window]
[ 0.474147] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff window]
[ 0.474150] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000c3fff window]
[ 0.474153] pci_bus 0000:00: resource 7 [mem 0x000c8000-0x000fffff window]
[ 0.474156] pci_bus 0000:00: resource 8 [mem 0x80000000-0xfebfffff window]
[ 0.474158] pci_bus 0000:00: resource 9 [mem 0x180000000-0xfffffffff window]
[ 0.474161] pci_bus 0000:00: resource 10 [mem 0xfed40000-0xfed44fff window]
[ 0.474165] pci_bus 0000:02: resource 1 [mem 0xf9100000-0xf91fffff]
[ 0.474168] pci_bus 0000:04: resource 0 [io 0xd000-0xdfff]
[ 0.474171] pci_bus 0000:04: resource 1 [mem 0xf9300000-0xf9afffff]
[ 0.474174] pci_bus 0000:04: resource 2 [mem 0xff0000000-0xfffffffff 64bit pref]
[ 0.474177] pci_bus 0000:0d: resource 0 [io 0xe000-0xffff]
[ 0.474180] pci_bus 0000:0d: resource 1 [mem 0xfbb00000-0xfdbfffff]
[ 0.474183] pci_bus 0000:0d: resource 2 [mem 0xf9b00000-0xfbafffff 64bit pref]
[ 0.474186] pci_bus 0000:0d: resource 4 [io 0x0000-0x0cf7 window]
[ 0.474189] pci_bus 0000:0d: resource 5 [io 0x0d00-0xffff window]
[ 0.474192] pci_bus 0000:0d: resource 6 [mem 0x000a0000-0x000c3fff window]
[ 0.474195] pci_bus 0000:0d: resource 7 [mem 0x000c8000-0x000fffff window]
[ 0.474198] pci_bus 0000:0d: resource 8 [mem 0x80000000-0xfebfffff window]
[ 0.474200] pci_bus 0000:0d: resource 9 [mem 0x180000000-0xfffffffff window]
[ 0.474204] pci_bus 0000:0d: resource 10 [mem 0xfed40000-0xfed44fff window]
[ 0.474207] pci_bus 0000:0e: resource 0 [io 0xe000-0xe0ff]
[ 0.474210] pci_bus 0000:0e: resource 1 [io 0xe400-0xe4ff]
[ 0.474212] pci_bus 0000:0e: resource 2 [mem 0x80000000-0x83ffffff pref]
[ 0.474215] pci_bus 0000:0e: resource 3 [mem 0x84000000-0x87ffffff]
[ 0.477374] PCI: CLS 64 bytes, default 64
[ 0.477416] PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
[ 0.477419] software IO TLB: mapped [mem 0x0000000078ad9000-0x000000007cad9000] (64MB)
[ 0.477527] Trying to unpack rootfs image as initramfs...
[ 0.478619] Initialise system trusted keyrings
[ 0.478656] Key type blacklist registered
[ 0.478790] workingset: timestamp_bits=41 max_order=20 bucket_order=0
[ 0.478840] zbud: loaded
[ 0.479288] integrity: Platform Keyring initialized
[ 0.479299] integrity: Machine keyring initialized
[ 0.496863] Key type asymmetric registered
[ 0.496874] Asymmetric key parser 'x509' registered
[ 0.496963] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 242)
[ 0.497139] io scheduler mq-deadline registered
[ 0.497142] io scheduler kyber registered
[ 0.497181] io scheduler bfq registered
[ 0.497896] pcieport 0000:00:1c.0: PME: Signaling with IRQ 24
[ 0.498301] pcieport 0000:00:1c.1: PME: Signaling with IRQ 25
[ 0.498682] pcieport 0000:00:1c.2: PME: Signaling with IRQ 26
[ 0.499067] pcieport 0000:00:1c.3: PME: Signaling with IRQ 27
[ 0.499255] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[ 0.499359] Monitor-Mwait will be used to enter C-1 state
[ 0.499375] Monitor-Mwait will be used to enter C-2 state
[ 0.499384] Monitor-Mwait will be used to enter C-3 state
[ 0.499391] ACPI: \_SB_.CP00: Found 3 idle states
[ 0.499784] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input0
[ 0.509510] ACPI: button: Power Button [PWRF]
[ 0.510251] Serial: 8250/16550 driver, 32 ports, IRQ sharing enabled
[ 0.514053] Non-volatile memory driver v1.3
[ 0.514060] Linux agpgart interface v0.103
[ 0.514115] AMD-Vi: AMD IOMMUv2 functionality not available on this system - This is not a bug.
[ 0.514160] ACPI: bus type drm_connector registered
[ 0.514854] ahci 0000:00:1f.2: version 3.0
[ 0.515200] ahci 0000:00:1f.2: AHCI 0001.0200 32 slots 4 ports 3 Gbps 0x3 impl SATA mode
[ 0.515208] ahci 0000:00:1f.2: flags: 64bit ncq sntf ilck stag pm led clo pio slum part ccc
[ 0.516014] scsi host0: ahci
[ 0.516317] scsi host1: ahci
[ 0.516554] scsi host2: ahci
[ 0.516793] scsi host3: ahci
[ 0.516898] ata1: SATA max UDMA/133 abar m2048@0xf90da000 port 0xf90da100 irq 28
[ 0.516903] ata2: SATA max UDMA/133 abar m2048@0xf90da000 port 0xf90da180 irq 28
[ 0.516906] ata3: DUMMY
[ 0.516908] ata4: DUMMY
[ 0.517311] uhci_hcd 0000:00:1a.0: UHCI Host Controller
[ 0.517324] uhci_hcd 0000:00:1a.0: new USB bus registered, assigned bus number 1
[ 0.517335] uhci_hcd 0000:00:1a.0: detected 2 ports
[ 0.517389] uhci_hcd 0000:00:1a.0: irq 16, io port 0x0000cfc0
[ 0.517623] usb usb1: New USB device found, idVendor=1d6b, idProduct=0001, bcdDevice= 6.04
[ 0.517629] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 0.517633] usb usb1: Product: UHCI Host Controller
[ 0.517636] usb usb1: Manufacturer: Linux 6.4.11-arch1-1 uhci_hcd
[ 0.517639] usb usb1: SerialNumber: 0000:00:1a.0
[ 0.517883] hub 1-0:1.0: USB hub found
[ 0.517904] hub 1-0:1.0: 2 ports detected
[ 0.518326] ehci-pci 0000:00:1a.7: EHCI Host Controller
[ 0.518337] ehci-pci 0000:00:1a.7: new USB bus registered, assigned bus number 2
[ 0.518372] ehci-pci 0000:00:1a.7: debug port 1
[ 0.522320] ehci-pci 0000:00:1a.7: irq 18, io mem 0xf90d9000
[ 0.532803] ehci-pci 0000:00:1a.7: USB 2.0 started, EHCI 1.00
[ 0.532975] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 6.04
[ 0.532981] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 0.532984] usb usb2: Product: EHCI Host Controller
[ 0.532987] usb usb2: Manufacturer: Linux 6.4.11-arch1-1 ehci_hcd
[ 0.532990] usb usb2: SerialNumber: 0000:00:1a.7
[ 0.533280] hub 2-0:1.0: USB hub found
[ 0.533297] hub 2-0:1.0: 6 ports detected
[ 0.559587] hub 1-0:1.0: USB hub found
[ 0.559611] hub 1-0:1.0: 2 ports detected
[ 0.559805] uhci_hcd 0000:00:1a.1: UHCI Host Controller
[ 0.559820] uhci_hcd 0000:00:1a.1: new USB bus registered, assigned bus number 3
[ 0.559832] uhci_hcd 0000:00:1a.1: detected 2 ports
[ 0.559888] uhci_hcd 0000:00:1a.1: irq 17, io port 0x0000cfa0
[ 0.560012] usb usb3: New USB device found, idVendor=1d6b, idProduct=0001, bcdDevice= 6.04
[ 0.560018] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 0.560021] usb usb3: Product: UHCI Host Controller
[ 0.560024] usb usb3: Manufacturer: Linux 6.4.11-arch1-1 uhci_hcd
[ 0.560027] usb usb3: SerialNumber: 0000:00:1a.1
[ 0.560221] hub 3-0:1.0: USB hub found
[ 0.560236] hub 3-0:1.0: 2 ports detected
[ 0.560452] ehci-pci 0000:00:1d.7: EHCI Host Controller
[ 0.560462] ehci-pci 0000:00:1d.7: new USB bus registered, assigned bus number 4
[ 0.560482] ehci-pci 0000:00:1d.7: debug port 1
[ 0.564413] ehci-pci 0000:00:1d.7: irq 16, io mem 0xf90d8000
[ 0.576148] ehci-pci 0000:00:1d.7: USB 2.0 started, EHCI 1.00
[ 0.576271] usb usb4: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 6.04
[ 0.576277] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 0.576281] usb usb4: Product: EHCI Host Controller
[ 0.576284] usb usb4: Manufacturer: Linux 6.4.11-arch1-1 ehci_hcd
[ 0.576287] usb usb4: SerialNumber: 0000:00:1d.7
[ 0.576586] hub 4-0:1.0: USB hub found
[ 0.576600] hub 4-0:1.0: 6 ports detected
[ 0.577056] uhci_hcd 0000:00:1a.2: UHCI Host Controller
[ 0.577072] uhci_hcd 0000:00:1a.2: new USB bus registered, assigned bus number 5
[ 0.577085] uhci_hcd 0000:00:1a.2: detected 2 ports
[ 0.577120] uhci_hcd 0000:00:1a.2: irq 18, io port 0x0000cf80
[ 0.577230] usb usb5: New USB device found, idVendor=1d6b, idProduct=0001, bcdDevice= 6.04
[ 0.577235] usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 0.577239] usb usb5: Product: UHCI Host Controller
[ 0.577241] usb usb5: Manufacturer: Linux 6.4.11-arch1-1 uhci_hcd
[ 0.577244] usb usb5: SerialNumber: 0000:00:1a.2
[ 0.577448] hub 5-0:1.0: USB hub found
[ 0.577464] hub 5-0:1.0: 2 ports detected
[ 0.577901] uhci_hcd 0000:00:1d.0: UHCI Host Controller
[ 0.577911] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 6
[ 0.577921] uhci_hcd 0000:00:1d.0: detected 2 ports
[ 0.577944] uhci_hcd 0000:00:1d.0: irq 16, io port 0x0000cf60
[ 0.578049] usb usb6: New USB device found, idVendor=1d6b, idProduct=0001, bcdDevice= 6.04
[ 0.578055] usb usb6: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 0.578058] usb usb6: Product: UHCI Host Controller
[ 0.578061] usb usb6: Manufacturer: Linux 6.4.11-arch1-1 uhci_hcd
[ 0.578064] usb usb6: SerialNumber: 0000:00:1d.0
[ 0.578229] hub 6-0:1.0: USB hub found
[ 0.578243] hub 6-0:1.0: 2 ports detected
[ 0.578640] uhci_hcd 0000:00:1d.1: UHCI Host Controller
[ 0.578649] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 7
[ 0.578659] uhci_hcd 0000:00:1d.1: detected 2 ports
[ 0.578682] uhci_hcd 0000:00:1d.1: irq 17, io port 0x0000cf40
[ 0.578785] usb usb7: New USB device found, idVendor=1d6b, idProduct=0001, bcdDevice= 6.04
[ 0.578791] usb usb7: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 0.578794] usb usb7: Product: UHCI Host Controller
[ 0.578797] usb usb7: Manufacturer: Linux 6.4.11-arch1-1 uhci_hcd
[ 0.578799] usb usb7: SerialNumber: 0000:00:1d.1
[ 0.578962] hub 7-0:1.0: USB hub found
[ 0.578977] hub 7-0:1.0: 2 ports detected
[ 0.579343] uhci_hcd 0000:00:1d.2: UHCI Host Controller
[ 0.579353] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 8
[ 0.579363] uhci_hcd 0000:00:1d.2: detected 2 ports
[ 0.579385] uhci_hcd 0000:00:1d.2: irq 18, io port 0x0000cf20
[ 0.579550] usb usb8: New USB device found, idVendor=1d6b, idProduct=0001, bcdDevice= 6.04
[ 0.579557] usb usb8: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 0.579561] usb usb8: Product: UHCI Host Controller
[ 0.579564] usb usb8: Manufacturer: Linux 6.4.11-arch1-1 uhci_hcd
[ 0.579567] usb usb8: SerialNumber: 0000:00:1d.2
[ 0.579765] hub 8-0:1.0: USB hub found
[ 0.579780] hub 8-0:1.0: 2 ports detected
[ 0.580156] usbcore: registered new interface driver usbserial_generic
[ 0.580171] usbserial: USB Serial support registered for generic
[ 0.580311] rtc_cmos 00:04: RTC can wake from S4
[ 0.580791] rtc_cmos 00:04: registered as rtc0
[ 0.580846] rtc_cmos 00:04: setting system clock to 2023-06-25T01:34:12 UTC (1687656852)
[ 0.580912] rtc_cmos 00:04: alarms up to one month, y3k, 242 bytes nvram
[ 0.581135] intel_pstate: CPU model not supported
[ 0.581178] ledtrig-cpu: registered to indicate activity on CPUs
[ 0.581479] hid: raw HID events driver (C) Jiri Kosina
[ 0.581807] drop_monitor: Initializing network drop monitor service
[ 0.585414] Freeing initrd memory: 12704K
[ 0.609686] Initializing XFRM netlink socket
[ 0.609799] NET: Registered PF_INET6 protocol family
[ 0.623222] Segment Routing with IPv6
[ 0.623230] RPL Segment Routing with IPv6
[ 0.623259] In-situ OAM (IOAM) with IPv6
[ 0.623320] NET: Registered PF_PACKET protocol family
[ 0.623812] microcode: Microcode Update Driver: v2.2.
[ 0.623822] IPI shorthand broadcast: enabled
[ 0.627991] sched_clock: Marking stable (625400154, 704928)->(632093176, -5988094)
[ 0.628259] registered taskstats version 1
[ 0.628474] Loading compiled-in X.509 certificates
[ 0.637789] Loaded X.509 cert 'Build time autogenerated kernel key: 8a5b7a7b2cce7251116cd26e5c8758855399e4b8'
[ 0.638863] zswap: loaded using pool zstd/zsmalloc
[ 0.643665] Key type .fscrypt registered
[ 0.643670] Key type fscrypt-provisioning registered
[ 0.644443] PM: Magic number: 11:12:560
[ 0.651734] RAS: Correctable Errors collector initialized.
[ 0.651856] clk: Disabling unused clocks
[ 0.754404] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[ 0.754433] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[ 0.755016] ata1.00: ATA-11: WDC WDBNCE5000PNC, 415020RL, max UDMA/133
[ 0.755543] ata1.00: 976773168 sectors, multi 1: LBA48 NCQ (depth 32), AA
[ 0.757061] ata1.00: Features: Dev-Sleep
[ 0.760233] ata1.00: configured for UDMA/133
[ 0.767331] ata2.00: ATAPI: TSSTcorp DVD+/-RW TS-U633A, D300, max UDMA/100
[ 0.767338] ata2.00: applying bridge limits
[ 0.771307] scsi 0:0:0:0: Direct-Access ATA WDC WDBNCE5000P 20RL PQ: 0 ANSI: 5
[ 0.771989] sd 0:0:0:0: [sda] 976773168 512-byte logical blocks: (500 GB/466 GiB)
[ 0.772015] sd 0:0:0:0: [sda] Write Protect is off
[ 0.772021] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 0.772060] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 0.772115] sd 0:0:0:0: [sda] Preferred minimum I/O size 512 bytes
[ 0.774327] sda: sda1 sda2 sda3 sda4
[ 0.774724] sd 0:0:0:0: [sda] Attached SCSI disk
[ 0.780691] ata2.00: configured for UDMA/100
[ 0.783423] scsi 1:0:0:0: CD-ROM TSSTcorp DVD+-RW TS-U633A D300 PQ: 0 ANSI: 5
[ 0.809663] Freeing unused decrypted memory: 2036K
[ 0.811173] Freeing unused kernel image (initmem) memory: 3352K
[ 0.811244] Write protecting the kernel read-only data: 30720k
[ 0.812330] Freeing unused kernel image (rodata/data gap) memory: 1556K
[ 0.897064] x86/mm: Checked W+X mappings: passed, no W+X pages found.
[ 0.897073] rodata_test: all tests were successful
[ 0.897083] x86/mm: Checking user space page tables
[ 0.907734] usb 1-1: new full-speed USB device number 2 using uhci_hcd
[ 0.978449] x86/mm: Checked W+X mappings: passed, no W+X pages found.
[ 0.978460] Run /init as init process
[ 0.978462] with arguments:
[ 0.978464] /init
[ 0.978466] with environment:
[ 0.978468] HOME=/
[ 0.978470] TERM=linux
[ 0.978471] BOOT_IMAGE=../vmlinuz-linux
[ 1.079398] usb 1-1: New USB device found, idVendor=0a5c, idProduct=4500, bcdDevice= 1.00
[ 1.079410] usb 1-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[ 1.079414] usb 1-1: Product: BCM2046B1
[ 1.079417] usb 1-1: Manufacturer: Broadcom
[ 1.082415] hub 1-1:1.0: USB hub found
[ 1.084360] hub 1-1:1.0: 3 ports detected
[ 1.148940] clocksource: timekeeping watchdog on CPU1: Marking clocksource 'tsc-early' as unstable because the skew is too large:
[ 1.148950] clocksource: 'hpet' wd_nsec: 506608417 wd_now: e34973 wd_last: 749aa5 mask: ffffffff
[ 1.148954] clocksource: 'tsc-early' cs_nsec: 451565145 cs_now: 48eb6dd1a cs_last: 4472d1e82 mask: ffffffffffffffff
[ 1.148958] clocksource: Clocksource 'tsc-early' skewed -55043272 ns (18446744073654 ms) over watchdog 'hpet' interval of 506608417 ns (506 ms)
[ 1.148962] clocksource: 'tsc-early' is current clocksource.
[ 1.148972] tsc: Marking TSC unstable due to clocksource watchdog
[ 1.149023] TSC found unstable after boot, most likely due to broken BIOS. Use 'tsc=unstable'.
[ 1.149025] sched_clock: Marking unstable (1148318337, 704928)<-(1155011297, -5988094)
[ 1.149251] clocksource: Switched to clocksource hpet
[ 1.232243] fbcon: Taking over console
[ 1.253906] EXT4-fs (sda1): mounted filesystem 4cd710a3-b52d-404a-85d1-138dda850858 r/w with ordered data mode. Quota mode: none.
[ 1.370925] systemd[1]: System time before build time, advancing clock.
[ 1.464226] systemd[1]: systemd 254.1-1-arch running in system mode (+PAM +AUDIT -SELINUX -APPARMOR -IMA +SMACK +SECCOMP +GCRYPT +GNUTLS +OPENSSL +ACL +BLKID +CURL +ELFUTILS +FIDO2 +IDN2 -IDN +IPTC +KMOD +LIBCRYPTSETUP +LIBFDISK +PCRE2 -PWQUALITY +P11KIT -QRENCODE +TPM2 +BZIP2 +LZ4 +XZ +ZLIB +ZSTD +BPF_FRAMEWORK +XKBCOMMON +UTMP -SYSVINIT default-hierarchy=unified)
[ 1.464244] systemd[1]: Detected architecture x86-64.
[ 1.466127] systemd[1]: Hostname set to <Latitude-E6400>.
[ 1.470746] usb 1-1.1: new full-speed USB device number 3 using uhci_hcd
[ 1.595402] usb 1-1.1: New USB device found, idVendor=413c, idProduct=8157, bcdDevice= 1.00
[ 1.595415] usb 1-1.1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[ 1.677434] usb 1-1.2: new full-speed USB device number 4 using uhci_hcd
[ 1.793109] systemd[1]: bpf-lsm: LSM BPF program attached
[ 1.808391] usb 1-1.2: New USB device found, idVendor=413c, idProduct=8158, bcdDevice= 1.00
[ 1.808401] usb 1-1.2: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[ 1.887421] usb 5-1: new full-speed USB device number 2 using uhci_hcd
[ 2.081045] systemd[1]: Queued start job for default target Multi-User System.
[ 2.085171] usb 5-1: New USB device found, idVendor=0a5c, idProduct=5800, bcdDevice= 1.01
[ 2.085180] usb 5-1: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[ 2.085183] usb 5-1: Product: 5880
[ 2.085186] usb 5-1: Manufacturer: Broadcom Corp
[ 2.085189] usb 5-1: SerialNumber: 0123456789ABCD
[ 2.085337] usb 5-1: config 0 descriptor??
[ 2.113124] systemd[1]: Created slice Slice /system/getty.
[ 2.113915] systemd[1]: Created slice Slice /system/modprobe.
[ 2.114669] systemd[1]: Created slice Slice /system/systemd-fsck.
[ 2.115329] systemd[1]: Created slice User and Session Slice.
[ 2.115514] systemd[1]: Started Dispatch Password Requests to Console Directory Watch.
[ 2.115659] systemd[1]: Started Forward Password Requests to Wall Directory Watch.
[ 2.116046] systemd[1]: Set up automount Arbitrary Executable File Formats File System Automount Point.
[ 2.116154] systemd[1]: Reached target Local Encrypted Volumes.
[ 2.116215] systemd[1]: Reached target Local Integrity Protected Volumes.
[ 2.116285] systemd[1]: Reached target Path Units.
[ 2.116346] systemd[1]: Reached target Remote File Systems.
[ 2.116403] systemd[1]: Reached target Slice Units.
[ 2.116466] systemd[1]: Reached target Swaps.
[ 2.116534] systemd[1]: Reached target Local Verity Protected Volumes.
[ 2.116716] systemd[1]: Listening on Device-mapper event daemon FIFOs.
[ 2.117412] systemd[1]: Listening on LVM2 poll daemon socket.
[ 2.120575] systemd[1]: Listening on Process Core Dump Socket.
[ 2.120918] systemd[1]: Listening on Journal Socket (/dev/log).
[ 2.121241] systemd[1]: Listening on Journal Socket.
[ 2.121624] systemd[1]: Listening on udev Control Socket.
[ 2.121900] systemd[1]: Listening on udev Kernel Socket.
[ 2.124031] systemd[1]: Mounting Huge Pages File System...
[ 2.126252] systemd[1]: Mounting POSIX Message Queue File System...
[ 2.128688] systemd[1]: Mounting Kernel Debug File System...
[ 2.130940] systemd[1]: Mounting Kernel Trace File System...
[ 2.133442] systemd[1]: Mounting Temporary Directory /tmp...
[ 2.136201] systemd[1]: Starting Create List of Static Device Nodes...
[ 2.138679] systemd[1]: Starting Load Kernel Module configfs...
[ 2.149252] systemd[1]: Starting Load Kernel Module dm_mod...
[ 2.151712] systemd[1]: Starting Load Kernel Module drm...
[ 2.154015] systemd[1]: Starting Load Kernel Module fuse...
[ 2.156691] systemd[1]: Starting Load Kernel Module loop...
[ 2.156910] systemd[1]: File System Check on Root Device was skipped because of an unmet condition check (ConditionPathIsReadWrite=!/).
[ 2.171043] systemd[1]: Starting Journal Service...
[ 2.203724] device-mapper: uevent: version 1.0.3
[ 2.205130] device-mapper: ioctl: 4.48.0-ioctl (2023-03-01) initialised: dm-devel@redhat.com
[ 2.206535] systemd-journald[136]: Collecting audit messages is disabled.
[ 2.208111] loop: module loaded
[ 2.211077] systemd[1]: Starting Load Kernel Modules...
[ 2.211167] systemd[1]: TPM2 PCR Machine ID Measurement was skipped because of an unmet condition check (ConditionPathExists=/sys/firmware/efi/efivars/StubPcrKernelImage-4a67b082-0a4c-41cf-b6c7-440b29bb8c4f).
[ 2.213332] systemd[1]: Starting Remount Root and Kernel File Systems...
[ 2.227066] systemd[1]: Starting Coldplug All udev Devices...
[ 2.242451] fuse: init (API version 7.38)
[ 2.268244] systemd[1]: Mounted Huge Pages File System.
[ 2.268663] systemd[1]: Mounted POSIX Message Queue File System.
[ 2.268907] systemd[1]: Mounted Kernel Debug File System.
[ 2.269137] systemd[1]: Mounted Kernel Trace File System.
[ 2.269360] systemd[1]: Mounted Temporary Directory /tmp.
[ 2.288152] systemd[1]: Finished Create List of Static Device Nodes.
[ 2.289057] systemd[1]: modprobe@configfs.service: Deactivated successfully.
[ 2.297412] EXT4-fs (sda1): re-mounted 4cd710a3-b52d-404a-85d1-138dda850858 r/w. Quota mode: none.
[ 2.301473] systemd[1]: Finished Load Kernel Module configfs.
[ 2.303228] systemd[1]: modprobe@dm_mod.service: Deactivated successfully.
[ 2.314605] systemd[1]: Finished Load Kernel Module dm_mod.
[ 2.315407] systemd[1]: modprobe@drm.service: Deactivated successfully.
[ 2.324896] systemd[1]: Finished Load Kernel Module drm.
[ 2.325670] systemd[1]: modprobe@fuse.service: Deactivated successfully.
[ 2.344977] systemd[1]: Finished Load Kernel Module fuse.
[ 2.345772] systemd[1]: modprobe@loop.service: Deactivated successfully.
[ 2.358087] systemd[1]: Finished Load Kernel Module loop.
[ 2.371344] systemd[1]: Finished Load Kernel Modules.
[ 2.384617] systemd[1]: Finished Remount Root and Kernel File Systems.
[ 2.397778] systemd[1]: Mounting FUSE Control File System...
[ 2.399885] systemd[1]: Mounting Kernel Configuration File System...
[ 2.409970] systemd[1]: Rebuild Hardware Database was skipped because of an unmet condition check (ConditionNeedsUpdate=/etc).
[ 2.412208] systemd[1]: Starting Load/Save OS Random Seed...
[ 2.412404] systemd[1]: Repartition Root Disk was skipped because no trigger condition checks were met.
[ 2.425397] systemd[1]: Starting Apply Kernel Variables...
[ 2.425626] systemd[1]: Create System Users was skipped because no trigger condition checks were met.
[ 2.440242] systemd[1]: Starting Create Static Device Nodes in /dev...
[ 2.443220] systemd[1]: Started Journal Service.
[ 2.548119] systemd-journald[136]: Received client request to flush runtime journal.
[ 2.566096] systemd-journald[136]: /var/log/journal/92fb75af2e32476983d409f99db05326/system.journal: Realtime clock jumped backwards relative to last journal entry, rotating.
[ 2.566114] systemd-journald[136]: Rotating system journal.
[ 2.577421] usb 2-6: new high-speed USB device number 4 using ehci-pci
[ 2.769295] usb 2-6: New USB device found, idVendor=0c45, idProduct=63f8, bcdDevice=88.06
[ 2.769306] usb 2-6: New USB device strings: Mfr=2, Product=1, SerialNumber=0
[ 2.769309] usb 2-6: Product: Laptop_Integrated_Webcam_0.3M
[ 2.769312] usb 2-6: Manufacturer: CN0TX5937248794100S5
[ 3.177397] random: crng init done
[ 3.347439] i8042: PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at 0x60,0x64 irq 1,12
[ 3.347728] i8042: Warning: Keylock active
[ 3.348927] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 3.354138] serio: i8042 AUX port at 0x60,0x64 irq 12
[ 3.521014] EXT4-fs (sda2): mounted filesystem db67c941-3fc8-4117-b1b0-2cec8558a090 r/w with ordered data mode. Quota mode: none.
[ 3.595141] input: PC Speaker as /devices/platform/pcspkr/input/input1
[ 3.653874] ACPI Warning: SystemIO range 0x0000000000000528-0x000000000000052F conflicts with OpRegion 0x0000000000000500-0x000000000000057F (\PMIO) (20230331/utaddress-204)
[ 3.653885] ACPI: OSL: Resource conflict; ACPI support missing from driver?
[ 3.653889] ACPI Warning: SystemIO range 0x00000000000005B0-0x00000000000005BF conflicts with OpRegion 0x0000000000000580-0x00000000000005BB (\GPIO) (20230331/utaddress-204)
[ 3.653893] ACPI: OSL: Resource conflict; ACPI support missing from driver?
[ 3.653894] ACPI Warning: SystemIO range 0x0000000000000580-0x00000000000005AF conflicts with OpRegion 0x0000000000000580-0x00000000000005BB (\GPIO) (20230331/utaddress-204)
[ 3.653898] ACPI: OSL: Resource conflict; ACPI support missing from driver?
[ 3.653899] lpc_ich: Resource conflict(s) found affecting gpio_ich
[ 3.783835] input: HID 413c:8157 as /devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.1/1-1.1:1.0/0003:413C:8157.0001/input/input2
[ 3.838083] hid-generic 0003:413C:8157.0001: input,hidraw0: USB HID v1.11 Keyboard [HID 413c:8157] on usb-0000:00:1a.0-1.1/input0
[ 3.848831] input: HID 413c:8158 Mouse as /devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.2/1-1.2:1.0/0003:413C:8158.0002/input/input3
[ 3.849139] hid-generic 0003:413C:8158.0002: input,hidraw1: USB HID v1.11 Mouse [HID 413c:8158] on usb-0000:00:1a.0-1.2/input0
[ 3.849193] usbcore: registered new interface driver usbhid
[ 3.849195] usbhid: USB HID core driver
[ 3.902472] e1000e: Intel(R) PRO/1000 Network Driver
[ 3.902478] e1000e: Copyright(c) 1999 - 2015 Intel Corporation.
[ 3.902716] e1000e 0000:00:19.0: Interrupt Throttling Rate (ints/sec) set to dynamic conservative mode
[ 3.912258] cfg80211: Loading compiled-in X.509 certificates for regulatory database
[ 3.919669] Loaded X.509 cert 'sforshee: 00b28ddf47aef9cea7'
[ 3.920575] sdhci: Secure Digital Host Controller Interface driver
[ 3.920579] sdhci: Copyright(c) Pierre Ossman
[ 3.921347] platform regulatory.0: Direct firmware load for regulatory.db failed with error -2
[ 3.921354] cfg80211: failed to load regulatory.db
[ 3.963536] i801_smbus 0000:00:1f.3: SMBus using PCI interrupt
[ 3.970907] firewire_ohci 0000:0d:01.1: added OHCI v1.10 device as card 0, 4 IR + 4 IT contexts, quirks 0x11
[ 4.019819] yenta_cardbus 0000:0d:01.0: CardBus bridge found [0000:0000]
[ 4.068461] sr 1:0:0:0: [sr0] scsi3-mmc drive: 24x/24x writer dvd-ram cd/rw xa/form2 cdda tray
[ 4.068470] cdrom: Uniform CD-ROM driver Revision: 3.20
[ 4.107609] sr 1:0:0:0: Attached scsi CD-ROM sr0
[ 4.173451] yenta_cardbus 0000:0d:01.0: ISA IRQ mask 0x0cb8, PCI irq 19
[ 4.173461] yenta_cardbus 0000:0d:01.0: Socket status: 30000006
[ 4.173466] yenta_cardbus 0000:0d:01.0: pcmcia: parent PCI bridge window: [io 0xe000-0xffff]
[ 4.173470] yenta_cardbus 0000:0d:01.0: pcmcia: parent PCI bridge window: [mem 0xfbb00000-0xfdbfffff]
[ 4.173472] pcmcia_socket pcmcia_socket0: cs: memory probe 0xfbb00000-0xfdbfffff:
[ 4.173480] excluding 0xfd9f0000-0xfdbfffff
[ 4.173484] yenta_cardbus 0000:0d:01.0: pcmcia: parent PCI bridge window: [mem 0xf9b00000-0xfbafffff 64bit pref]
[ 4.173486] pcmcia_socket pcmcia_socket0: cs: memory probe 0xf9b00000-0xfbafffff:
[ 4.173490] excluding 0xf9b00000-0xfbafffff
[ 4.187923] dcdbas dcdbas: Dell Systems Management Base Driver (version 5.6.0-3.4)
[ 4.205148] mc: Linux media interface: v0.10
[ 4.205407] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input5
[ 4.209147] mousedev: PS/2 mouse device common for all mice
[ 4.234013] iTCO_vendor_support: vendor-support=0
[ 4.244080] sdhci-pci 0000:0d:01.2: SDHCI controller found [1180:0822] (rev 21)
[ 4.244257] sdhci-pci 0000:0d:01.2: Will use DMA mode even though HW doesn't fully claim to support it.
[ 4.244314] mmc0 bounce up to 128 segments into one, max segment size 65536 bytes
[ 4.248087] sdhci-pci 0000:0d:01.2: Will use DMA mode even though HW doesn't fully claim to support it.
[ 4.250900] mmc0: SDHCI controller on PCI [0000:0d:01.2] using DMA
[ 4.250943] sdhci-pci 0000:0d:01.2: Will use DMA mode even though HW doesn't fully claim to support it.
[ 4.294079] usb 1-1.3: new full-speed USB device number 5 using uhci_hcd
[ 4.322415] e1000e 0000:00:19.0 eth0: (PCI Express:2.5GT/s:Width x1) 00:de:ad:c0:ff:ee
[ 4.322431] e1000e 0000:00:19.0 eth0: Intel(R) PRO/1000 Network Connection
[ 4.322505] e1000e 0000:00:19.0 eth0: MAC: 7, PHY: 8, PBA No: 1008FF-0FF
[ 4.344456] Intel(R) Wireless WiFi driver for Linux
[ 4.381463] iwlwifi 0000:02:00.0: Detected crf-id 0xa5a5a5a1, cnv-id 0xa5a5a5a1 wfpm id 0xa5a5a5a1
[ 4.381476] iwlwifi 0000:02:00.0: PCI dev 4232/1321, rev=0x54, rfid=0xd55555d5
[ 4.386387] iwlwifi 0000:02:00.0: loaded firmware version 8.83.5.1 build 33692 5000-5.ucode op_mode iwldvm
[ 4.399433] e1000e 0000:00:19.0 eno0: renamed from eth0
[ 4.420181] videodev: Linux video capture interface: v2.00
[ 4.433700] usb 1-1.3: New USB device found, idVendor=413c, idProduct=8156, bcdDevice= 4.56
[ 4.433708] usb 1-1.3: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[ 4.433710] usb 1-1.3: Product: Dell Wireless 370 Bluetooth Mini-card
[ 4.433712] usb 1-1.3: Manufacturer: Dell Computer Corp
[ 4.458708] intel_powerclamp: No package C-state available
[ 4.474504] firewire_core 0000:0d:01.1: created device fw0: GUID 0000000000000000, S400
[ 4.628254] Module iTCO_wdt is blacklisted
[ 4.770135] intel_powerclamp: No package C-state available
[ 4.773875] Bluetooth: Core ver 2.22
[ 4.773965] NET: Registered PF_BLUETOOTH protocol family
[ 4.773967] Bluetooth: HCI device and connection manager initialized
[ 4.773973] Bluetooth: HCI socket layer initialized
[ 4.773976] Bluetooth: L2CAP socket layer initialized
[ 4.773982] Bluetooth: SCO socket layer initialized
[ 4.852098] dell_smbios: Unable to run on non-Dell system
[ 4.895854] usb 2-6: Found UVC 1.00 device Laptop_Integrated_Webcam_0.3M (0c45:63f8)
[ 4.897139] iwlwifi 0000:02:00.0: CONFIG_IWLWIFI_DEBUG enabled
[ 4.897143] iwlwifi 0000:02:00.0: CONFIG_IWLWIFI_DEBUGFS enabled
[ 4.897145] iwlwifi 0000:02:00.0: CONFIG_IWLWIFI_DEVICE_TRACING enabled
[ 4.897147] iwlwifi 0000:02:00.0: Detected Intel(R) WiFi Link 5100 AGN, REV=0x54
[ 4.928740] usbcore: registered new interface driver uvcvideo
[ 4.942103] ieee80211 phy0: Selected rate control algorithm 'iwl-agn-rs'
[ 4.952220] iwlwifi 0000:02:00.0 wlp2s0: renamed from wlan0
[ 4.953834] usbcore: registered new interface driver btusb
[ 5.030555] snd_hda_codec_idt hdaudioC0D0: autoconfig for 92HD71B7X: line_outs=1 (0xf/0x0/0x0/0x0/0x0) type:line
[ 5.030565] snd_hda_codec_idt hdaudioC0D0: speaker_outs=1 (0xd/0x0/0x0/0x0/0x0)
[ 5.030568] snd_hda_codec_idt hdaudioC0D0: hp_outs=1 (0xa/0x0/0x0/0x0/0x0)
[ 5.030570] snd_hda_codec_idt hdaudioC0D0: mono: mono_out=0x0
[ 5.030572] snd_hda_codec_idt hdaudioC0D0: inputs:
[ 5.030574] snd_hda_codec_idt hdaudioC0D0: Dock Mic=0xe
[ 5.030576] snd_hda_codec_idt hdaudioC0D0: Internal Mic=0x18
[ 5.030578] snd_hda_codec_idt hdaudioC0D0: Mic=0xb
[ 5.060544] iwlwifi 0000:02:00.0: Radio type=0x1-0x2-0x0
[ 5.116693] input: HDA Intel Dock Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input8
[ 5.117116] input: HDA Intel Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input9
[ 5.117179] input: HDA Intel Dock Line Out as /devices/pci0000:00/0000:00:1b.0/sound/card0/input10
[ 5.117236] input: HDA Intel Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card0/input11
[ 5.117293] input: HDA Intel HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:1b.0/sound/card0/input12
[ 5.182907] iwlwifi 0000:02:00.0: Radio type=0x1-0x2-0x0
[ 5.253331] iwlwifi 0000:02:00.0: Radio type=0x1-0x2-0x0
[ 5.373236] iwlwifi 0000:02:00.0: Radio type=0x1-0x2-0x0
[ 5.607207] input: AlpsPS/2 ALPS DualPoint Stick as /devices/platform/i8042/serio1/input/input13
[ 5.624794] input: AlpsPS/2 ALPS DualPoint TouchPad as /devices/platform/i8042/serio1/input/input7
[ 5.680235] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
[ 5.680244] Bluetooth: BNEP filters: protocol multicast
[ 5.680251] Bluetooth: BNEP socket layer initialized
[ 5.683302] Bluetooth: MGMT ver 1.22
[ 5.686692] pci 0000:00:00.0: Intel GM45 Chipset
[ 5.686715] pci 0000:00:00.0: detected gtt size: 2097152K total, 262144K mappable
[ 5.687041] pci 0000:00:00.0: detected 32768K stolen memory
[ 5.689506] i915 0000:00:02.0: vgaarb: deactivate vga console
[ 5.697210] NET: Registered PF_ALG protocol family
[ 5.771736] i915 0000:00:02.0: [drm] Skipping intel_backlight registration
[ 5.773203] [drm] Initialized i915 1.6.0 20201103 for 0000:00:02.0 on minor 0
[ 5.773490] ACPI: video: Video Device [GFX0] (multi-head: yes rom: no post: no)
[ 5.774101] input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:00/input/input14
[ 6.443433] acpi device:06: registered as cooling_device2
[ 6.562959] fbcon: i915drmfb (fb0) is primary device
[ 7.166298] Console: switching to colour frame buffer device 160x50
[ 7.185530] i915 0000:00:02.0: [drm] fb0: i915drmfb frame buffer device
[ 7.608317] e1000e 0000:00:19.0 eno0: NIC Link is Up 1000 Mbps Full Duplex, Flow Control: Rx/Tx
[ 7.608472] IPv6: ADDRCONF(NETDEV_CHANGE): eno0: link becomes ready
[ 26.525391] systemd-journald[136]: /var/log/journal/92fb75af2e32476983d409f99db05326/user-1000.journal: Boot ID changed since last record, rotating.
[ 409.046412] iwlwifi 0000:02:00.0: Radio type=0x1-0x2-0x0
[ 409.167396] iwlwifi 0000:02:00.0: Radio type=0x1-0x2-0x0
[ 819.043849] iwlwifi 0000:02:00.0: Radio type=0x1-0x2-0x0
[ 819.167453] iwlwifi 0000:02:00.0: Radio type=0x1-0x2-0x0
[ 1231.057136] iwlwifi 0000:02:00.0: Radio type=0x1-0x2-0x0
[ 1231.177434] iwlwifi 0000:02:00.0: Radio type=0x1-0x2-0x0