| |
| coreboot-4.13-2375-gd7c31d1dbe Sat Feb 27 09:41:42 UTC 2021 bootblock starting (log level: 7)... |
| FMAP: Found "FLASH" version 1.1 at 0x0. |
| FMAP: base = 0xfffc0000 size = 0x40000 #areas = 3 |
| FMAP: area COREBOOT found @ 200 (261632 bytes) |
| CBFS: mcache @0x00014e00 built for 11 files, used 0x234 of 0x2000 bytes |
| CBFS: Found 'fallback/romstage' @0x80 size 0x412c in mcache @0x00014e2c |
| BS: bootblock times (exec / console): total (unknown) / 6 ms |
| |
| |
| coreboot-4.13-2375-gd7c31d1dbe Sat Feb 27 09:41:42 UTC 2021 romstage starting (log level: 7)... |
| QEMU: firmware config interface detected |
| Firmware config version id: 3 |
| QEMU: firmware config: Found 'etc/e820' |
| CBMEM: |
| IMD: root @ 0x3ffff000 254 entries. |
| IMD: root @ 0x3fffec00 62 entries. |
| FMAP: area COREBOOT found @ 200 (261632 bytes) |
| MTRR Range: Start=fffc0000 End=0 (Size 40000) |
| CBFS: Found 'fallback/postcar' @0x125c0 size 0x4444 in mcache @0x00014f78 |
| Decompressing stage fallback/postcar @ 0x3ffd2fc0 (33936 bytes) |
| Loading module at 0x3ffd3000 with entry 0x3ffd3031. filesize: 0x4150 memsize: 0x8450 |
| Processing 166 relocs. Offset value of 0x3dfd3000 |
| BS: romstage times (exec / console): total (unknown) / 18 ms |
| |
| |
| coreboot-4.13-2375-gd7c31d1dbe Sat Feb 27 09:41:42 UTC 2021 postcar starting (log level: 7)... |
| FMAP: area COREBOOT found @ 200 (261632 bytes) |
| CBFS: Found 'fallback/ramstage' @0x4240 size 0xcba2 in mcache @0x3fffea50 |
| Decompressing stage fallback/ramstage @ 0x3ffa9fc0 (161416 bytes) |
| Loading module at 0x3ffaa000 with entry 0x3ffaa000. filesize: 0x19ad8 memsize: 0x27648 |
| Processing 1602 relocs. Offset value of 0x3f1aa000 |
| BS: postcar times (exec / console): total (unknown) / 6 ms |
| |
| |
| coreboot-4.13-2375-gd7c31d1dbe Sat Feb 27 09:41:42 UTC 2021 ramstage starting (log level: 7)... |
| Enumerating buses... |
| Root Device scanning... |
| CPU_CLUSTER: 0 enabled |
| DOMAIN: 0000 enabled |
| CPU_CLUSTER: 0 scanning... |
| QEMU: firmware config interface detected |
| Firmware config version id: 3 |
| QEMU: max_cpus is 2 |
| CPU: APIC: 00 enabled |
| CPU: APIC: 01 enabled |
| scan_bus: bus CPU_CLUSTER: 0 finished in 1 msecs |
| DOMAIN: 0000 scanning... |
| PCI: pci_scan_bus for bus 00 |
| PCI: 00:00.0 [8086/1237] enabled |
| PCI: 00:01.0 [8086/7000] enabled |
| PCI: 00:01.1 [8086/7010] enabled |
| PCI: 00:01.3 [8086/7113] enabled |
| PCI: 00:02.0 [1234/1111] enabled |
| PCI: 00:03.0 [8086/100e] enabled |
| PCI: 00:01.0 scanning... |
| scan_bus: bus PCI: 00:01.0 finished in 0 msecs |
| PCI: 00:01.3 scanning... |
| scan_bus: bus PCI: 00:01.3 finished in 0 msecs |
| scan_bus: bus DOMAIN: 0000 finished in 7 msecs |
| scan_bus: bus Root Device finished in 11 msecs |
| done |
| BS: BS_DEV_ENUMERATE run times (exec / console): 1 / 12 ms |
| found VGA at PCI: 00:02.0 |
| Setting up VGA for PCI: 00:02.0 |
| Setting PCI_BRIDGE_CTL_VGA for bridge DOMAIN: 0000 |
| Setting PCI_BRIDGE_CTL_VGA for bridge Root Device |
| Allocating resources... |
| Reading resources... |
| QEMU: firmware config: Found 'etc/e820' |
| QEMU: e820/res: 0xfeffc000 +0x00004000 |
| QEMU: e820/ram: 0x00000000 + 0x40000000 |
| QEMU: reserve ioports 0x0510-0x0511 [firmware-config] |
| QEMU: reserve ioports 0x5658-0x5658 [vmware-port] |
| QEMU: reserve ioports 0xae00-0xae0f [pci-hotplug] |
| QEMU: reserve ioports 0xaf00-0xaf1f [cpu-hotplug] |
| QEMU: reserve ioports 0xafe0-0xafe3 [piix4-gpe0] |
| Done reading resources. |
| ==== Resource allocator: DOMAIN: 0000 - Pass 1 (gathering requirements) === |
| === Resource allocator: DOMAIN: 0000 - Pass 2 (allocating resources) === |
| DOMAIN: 0000 io: base: 0 size: 0 align: 0 gran: 0 limit: ffff |
| update_constraints: DOMAIN: 0000 0d base 00000510 limit 00000511 io (fixed) |
| update_constraints: DOMAIN: 0000 0e base 00005658 limit 00005658 io (fixed) |
| update_constraints: DOMAIN: 0000 0f base 0000ae00 limit 0000ae0f io (fixed) |
| update_constraints: DOMAIN: 0000 10 base 0000af00 limit 0000af1f io (fixed) |
| update_constraints: DOMAIN: 0000 11 base 0000afe0 limit 0000afe3 io (fixed) |
| update_constraints: PCI: 00:01.0 01 base 00000000 limit 00000fff io (fixed) |
| update_constraints: PCI: 00:01.3 01 base 0000e400 limit 0000e43f io (fixed) |
| update_constraints: PCI: 00:01.3 02 base 00000f00 limit 00000f0f io (fixed) |
| DOMAIN: 0000: Resource ranges: |
| * Base: 1000, Size: 4658, Tag: 100 |
| * Base: 5659, Size: 57a7, Tag: 100 |
| * Base: ae10, Size: f0, Tag: 100 |
| * Base: af20, Size: c0, Tag: 100 |
| * Base: afe4, Size: 341c, Tag: 100 |
| * Base: e440, Size: 1bc0, Tag: 100 |
| PCI: 00:03.0 14 * [0x1000 - 0x103f] limit: 103f io |
| PCI: 00:01.1 20 * [0x1040 - 0x104f] limit: 104f io |
| DOMAIN: 0000 io: base: 0 size: 0 align: 0 gran: 0 limit: ffff done |
| DOMAIN: 0000 mem: base: 0 size: 0 align: 0 gran: 0 limit: fffffffff |
| update_constraints: DOMAIN: 0000 0a base feffc000 limit feffffff mem (fixed) |
| update_constraints: DOMAIN: 0000 0b base 00000000 limit 0009ffff mem (fixed) |
| update_constraints: DOMAIN: 0000 0c base 000c0000 limit 3fffffff mem (fixed) |
| update_constraints: DOMAIN: 0000 12 base 000a0000 limit 000bffff mem (fixed) |
| update_constraints: DOMAIN: 0000 13 base 000c0000 limit 000fffff mem (fixed) |
| update_constraints: DOMAIN: 0000 02 base fec00000 limit fecfffff mem (fixed) |
| update_constraints: DOMAIN: 0000 03 base fee00000 limit fee0ffff mem (fixed) |
| update_constraints: PCI: 00:01.0 02 base ff800000 limit ffffffff mem (fixed) |
| DOMAIN: 0000: Resource ranges: |
| * Base: 40000000, Size: bec00000, Tag: 200 |
| * Base: fed00000, Size: 100000, Tag: 200 |
| * Base: fee10000, Size: 1ec000, Tag: 200 |
| * Base: ff000000, Size: 800000, Tag: 200 |
| * Base: 100000000, Size: f00000000, Tag: 100200 |
| PCI: 00:02.0 10 * [0x40000000 - 0x40ffffff] limit: 40ffffff prefmem |
| PCI: 00:03.0 30 * [0x41000000 - 0x4103ffff] limit: 4103ffff mem |
| PCI: 00:03.0 10 * [0x41040000 - 0x4105ffff] limit: 4105ffff mem |
| PCI: 00:02.0 30 * [0x41060000 - 0x4106ffff] limit: 4106ffff mem |
| PCI: 00:02.0 18 * [0x41070000 - 0x41070fff] limit: 41070fff mem |
| DOMAIN: 0000 mem: base: 0 size: 0 align: 0 gran: 0 limit: fffffffff done |
| === Resource allocator: DOMAIN: 0000 - resource allocation complete === |
| PCI: 00:01.1 20 <- [0x0000001040 - 0x000000104f] size 0x00000010 gran 0x04 io |
| PCI: 00:02.0 10 <- [0x0040000000 - 0x0040ffffff] size 0x01000000 gran 0x18 prefmem |
| PCI: 00:02.0 18 <- [0x0041070000 - 0x0041070fff] size 0x00001000 gran 0x0c mem |
| PCI: 00:02.0 30 <- [0x0041060000 - 0x004106ffff] size 0x00010000 gran 0x10 romem |
| PCI: 00:03.0 10 <- [0x0041040000 - 0x004105ffff] size 0x00020000 gran 0x11 mem |
| PCI: 00:03.0 14 <- [0x0000001000 - 0x000000103f] size 0x00000040 gran 0x06 io |
| PCI: 00:03.0 30 <- [0x0041000000 - 0x004103ffff] size 0x00040000 gran 0x12 romem |
| Done setting resources. |
| Done allocating resources. |
| BS: BS_DEV_RESOURCES run times (exec / console): 3 / 64 ms |
| Enabling resources... |
| PCI: 00:00.0 cmd <- 00 |
| PCI: 00:01.0 cmd <- 00 |
| PCI: 00:01.1 cmd <- 01 |
| PCI: 00:01.3 cmd <- 00 |
| PCI: 00:02.0 cmd <- 03 |
| PCI: 00:03.0 cmd <- 03 |
| done. |
| BS: BS_DEV_ENABLE run times (exec / console): 1 / 3 ms |
| Initializing devices... |
| CPU_CLUSTER: 0 init |
| start_eip=0x00001000, code_size=0x00000031 |
| Initializing CPU #0 |
| CPU: vendor Intel device 663 |
| CPU: family 06, model 06, stepping 03 |
| Setting up local APIC... |
| apic_id: 0x00 done. |
| CPU #0 initialized |
| Initializing CPU #1 |
| Waiting for 1 CPUS to stop |
| CPU: vendor Intel device 663 |
| CPU: family 06, model 06, stepping 03 |
| Setting up local APIC... |
| apic_id: 0x01 done. |
| CPU #1 initialized |
| All AP CPUs stopped (186 loops) |
| CPU_CLUSTER: 0 init finished in 16 msecs |
| PCI: 00:00.0 init |
| Assigning IRQ 10 to PCI: 00:01.3 |
| Assigning IRQ 11 to PCI: 00:03.0 |
| PCI: 00:00.0 init finished in 4 msecs |
| PCI: 00:01.0 init |
| RTC Init |
| PCI: 00:01.0 init finished in 0 msecs |
| PCI: 00:01.1 init |
| IDE: Primary IDE interface: on |
| IDE: Secondary IDE interface: on |
| IDE: Access to legacy IDE ports: off |
| PCI: 00:01.1 init finished in 1 msecs |
| PCI: 00:02.0 init |
| PCI: 00:02.0 init finished in 29 msecs |
| PCI: 00:03.0 init |
| PCI: 00:03.0 init finished in 0 msecs |
| Devices initialized |
| BS: BS_DEV_INIT run times (exec / console): 48 / 11 ms |
| Finalize devices... |
| Devices finalized |
| BS: BS_POST_DEVICE run times (exec / console): 0 / 1 ms |
| Copying Interrupt Routing Table to 0x000f0000... done. |
| Copying Interrupt Routing Table to 0x3ffa0000... done. |
| PIRQ table: 128 bytes. |
| QEMU: firmware config: Found 'etc/table-loader' |
| QEMU: found ACPI tables in fw_cfg. |
| QEMU: firmware config: Found 'etc/acpi/rsdp' |
| QEMU: loading "etc/acpi/rsdp" to 0x3ff7c000 (len 20) |
| QEMU: firmware config: Found 'etc/acpi/tables' |
| QEMU: loading "etc/acpi/tables" to 0x3ff7c040 (len 131072) |
| QEMU: loaded ACPI tables from fw_cfg. |
| Looking on 0x3ff7c000 for valid checksum |
| Checksum 1 passed |
| Checksum 2 passed all OK |
| ACPI: * SSDT |
| Found 2 CPU(s). |
| ACPI: added table 5/32, length now 56 |
| ACPI tables: 131136 bytes. |
| smbios_write_tables: 3ff7b000 |
| SMBIOS firmware version is set to coreboot_version: '4.13-2375-gd7c31d1dbe' |
| SMBIOS: Unknown CPU |
| DOMAIN: 0000 (QEMU Northbridge i440fx) |
| QEMU: firmware config: Found 'etc/smbios/smbios-tables' |
| QEMU: found smbios tables in fw_cfg (len 389). |
| QEMU: coreboot type0 table found at 0x3ff7b040. |
| QEMU: loading smbios tables to 0x3ff7b085 |
| SMBIOS tables: 522 bytes. |
| Writing table forward entry at 0x00000500 |
| Wrote coreboot table at: 0x00000500, 0x10 bytes, checksum afe4 |
| Writing coreboot table at 0x3ffa1000 |
| 0. 0000000000000000-0000000000000fff: CONFIGURATION TABLES |
| 1. 0000000000001000-000000000009ffff: RAM |
| 2. 00000000000a0000-00000000000fffff: RESERVED |
| 3. 0000000000100000-000000003ff7afff: RAM |
| 4. 000000003ff7b000-000000003ffa9fff: CONFIGURATION TABLES |
| 5. 000000003ffaa000-000000003ffd1fff: RAMSTAGE |
| 6. 000000003ffd2000-000000003fffffff: CONFIGURATION TABLES |
| 7. 00000000ff800000-00000000ffffffff: RESERVED |
| FMAP: area COREBOOT found @ 200 (261632 bytes) |
| Wrote coreboot table at: 0x3ffa1000, 0x2d4 bytes, checksum def |
| coreboot table: 748 bytes. |
| IMD ROOT 0. 0x3ffff000 0x00001000 |
| IMD SMALL 1. 0x3fffe000 0x00001000 |
| CONSOLE 2. 0x3ffde000 0x00020000 |
| TIME STAMP 3. 0x3ffdd000 0x00000910 |
| ROMSTG STCK 4. 0x3ffdc000 0x00001000 |
| AFTER CAR 5. 0x3ffd2000 0x0000a000 |
| RAMSTAGE 6. 0x3ffa9000 0x00029000 |
| COREBOOT 7. 0x3ffa1000 0x00008000 |
| IRQ TABLE 8. 0x3ffa0000 0x00001000 |
| ACPI 9. 0x3ff7c000 0x00024000 |
| SMBIOS 10. 0x3ff7b000 0x00000800 |
| IMD small region: |
| IMD ROOT 0. 0x3fffec00 0x00000400 |
| RO MCACHE 1. 0x3fffe9c0 0x00000234 |
| FMAP 2. 0x3fffe900 0x000000b6 |
| BS: BS_WRITE_TABLES run times (exec / console): 3 / 36 ms |
| CBFS: Found 'fallback/payload' @0x16a40 size 0x10fb9 in mcache @0x3fffeb64 |
| Checking segment from ROM address 0xfffd6c6c |
| Payload being loaded at below 1MiB without region being marked as RAM usable. |
| Checking segment from ROM address 0xfffd6c88 |
| Loading segment from ROM address 0xfffd6c6c |
| code (compression=1) |
| New segment dstaddr 0x000dfdc0 memsize 0x20240 srcaddr 0xfffd6ca4 filesize 0x10f81 |
| Loading Segment: addr: 0x000dfdc0 memsz: 0x0000000000020240 filesz: 0x0000000000010f81 |
| using LZMA |
| Loading segment from ROM address 0xfffd6c88 |
| Entry Point 0x000fd276 |
| BS: BS_PAYLOAD_LOAD run times (exec / console): 7 / 8 ms |
| Jumping to boot code at 0x000fd276(0x3ffa1000) |
| SeaBIOS (version rel-1.14.0-15-gef88eea) |
| BUILD: gcc: (Debian 10.2.1-6) 10.2.1 20210110 binutils: (GNU Binutils for Debian) 2.35.2 |
| Found coreboot cbmem console @ 3ffde000 |
| Found mainboard Emulation QEMU x86 i440fx/piix4 |
| Relocating init from 0x000e1500 to 0x3ff2db60 (size 54272) |
| Found CBFS header at 0xfffc022c |
| multiboot: eax=3ffc35e0, ebx=3ffc35a4 |
| Found 6 PCI devices (max PCI bus is 00) |
| Copying SMBIOS entry point from 0x3ff7b000 to 0x000f68c0 |
| Copying ACPI RSDP from 0x3ff7c000 to 0x000f68a0 |
| Copying PIR from 0x3ffa0000 to 0x000f6820 |
| table(50434146)=0x3ff7d497 (via rsdt) |
| Using pmtimer, ioport 0xe408 |
| Scan for VGA option rom |
| Running option rom at c000:0003 |
| pmm call arg1=0 |
| Turning on vga text mode console |
| SeaBIOS (version rel-1.14.0-15-gef88eea) |
| ATA controller 1 at 1f0/3f4/0 (irq 14 dev 9) |
| ATA controller 2 at 170/374/0 (irq 15 dev 9) |
| Searching bootorder for: HALT |
| Found 1 lpt ports |
| Found 1 serial ports |
| PS2 keyboard initialized |
| ata0-0: QEMU HARDDISK ATA-7 Hard-Disk (2048 MiBytes) |
| Searching bootorder for: /pci@i0cf8/*@1,1/drive@0/disk@0 |
| Searching bios-geometry for: /pci@i0cf8/*@1,1/drive@0/disk@0 |
| DVD/CD [ata1-0: QEMU DVD-ROM ATAPI-4 DVD/CD] |
| Searching bootorder for: /pci@i0cf8/*@1,1/drive@1/disk@0 |
| Searching bios-geometry for: /pci@i0cf8/*@1,1/drive@1/disk@0 |
| All threads complete. |
| Scan for option roms |
| Running option rom at ca00:0003 |
| pmm call arg1=1 |
| pmm call arg1=0 |
| pmm call arg1=1 |
| pmm call arg1=0 |
| Searching bootorder for: /pci@i0cf8/*@3 |
| |
| Press ESC for boot menu. |
| |
| Select boot device: |
| |
| 1. DVD/CD [ata1-0: QEMU DVD-ROM ATAPI-4 DVD/CD] |
| 2. ata0-0: QEMU HARDDISK ATA-7 Hard-Disk (2048 MiBytes) |
| 3. iPXE (PCI 00:03.0) |
| |
| Searching bootorder for: HALT |
| drive 0x000f67b0: PCHS=4161/16/63 translation=large LCHS=520/128/63 s=4194304 |
| Space available for UMB: cb000-ed000, f60e0-f6750 |
| Returned 262144 bytes of ZoneHigh |
| e820 map has 6 items: |
| 0: 0000000000000000 - 000000000009fc00 = 1 RAM |
| 1: 000000000009fc00 - 00000000000a0000 = 2 RESERVED |
| 2: 00000000000f0000 - 0000000000100000 = 2 RESERVED |
| 3: 0000000000100000 - 000000003ff7b000 = 1 RAM |
| 4: 000000003ff7b000 - 0000000040000000 = 2 RESERVED |
| 5: 00000000ff800000 - 0000000100000000 = 2 RESERVED |
| enter handle_19: |
| NULL |
| Booting from Hard Disk... |
| Booting from 0000:7c00 |
| |