| [ 0.000000] Linux version 4.15.9-1-ARCH (builduser@heftig-13420) (gcc version 7.3.0 (GCC)) #1 SMP PREEMPT Sun Mar 11 17:54:33 UTC 2018 |
| [ 0.000000] Command line: BOOT_IMAGE=/boot/vmlinuz-linux root=UUID=e2350c90-39db-4509-a4b4-a28b062d87a0 rw console=ttyS0,115200 |
| [ 0.000000] KERNEL supported cpus: |
| [ 0.000000] Intel GenuineIntel |
| [ 0.000000] AMD AuthenticAMD |
| [ 0.000000] Centaur CentaurHauls |
| [ 0.000000] random: get_random_u32 called from bsp_init_amd+0x1d9/0x220 with crng_init=0 |
| [ 0.000000] x86/fpu: Supporting XSAVE feature 0x001: 'x87 floating point registers' |
| [ 0.000000] x86/fpu: Supporting XSAVE feature 0x002: 'SSE registers' |
| [ 0.000000] x86/fpu: Supporting XSAVE feature 0x004: 'AVX registers' |
| [ 0.000000] x86/fpu: xstate_offset[2]: 576, xstate_sizes[2]: 256 |
| [ 0.000000] x86/fpu: Enabled xstate features 0x7, context size is 832 bytes, using 'standard' format. |
| [ 0.000000] e820: BIOS-provided physical RAM map: |
| [ 0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009fbff] usable |
| [ 0.000000] BIOS-e820: [mem 0x000000000009fc00-0x000000000009ffff] reserved |
| [ 0.000000] BIOS-e820: [mem 0x00000000000f0000-0x00000000000fffff] reserved |
| [ 0.000000] BIOS-e820: [mem 0x0000000000100000-0x00000000bfd6efff] usable |
| [ 0.000000] BIOS-e820: [mem 0x00000000bfd6f000-0x00000000dfffffff] reserved |
| [ 0.000000] BIOS-e820: [mem 0x00000000f8000000-0x00000000fbffffff] reserved |
| [ 0.000000] BIOS-e820: [mem 0x0000000100000000-0x000000019effffff] usable |
| [ 0.000000] NX (Execute Disable) protection: active |
| [ 0.000000] random: fast init done |
| [ 0.000000] SMBIOS 2.7 present. |
| [ 0.000000] DMI: MSI MS-7721/MS-7721, BIOS 4.7-673-g5e32f41b43 04/09/2018 |
| [ 0.000000] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved |
| [ 0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable |
| [ 0.000000] e820: last_pfn = 0x19f000 max_arch_pfn = 0x400000000 |
| [ 0.000000] MTRR default type: uncachable |
| [ 0.000000] MTRR fixed ranges enabled: |
| [ 0.000000] 00000-9FFFF write-back |
| [ 0.000000] A0000-BFFFF uncachable |
| [ 0.000000] C0000-FFFFF write-back |
| [ 0.000000] MTRR variable ranges enabled: |
| [ 0.000000] 0 base 0000FF800000 mask FFFFFF800000 write-protect |
| [ 0.000000] 1 base 000080000000 mask FFFFC0000000 write-back |
| [ 0.000000] 2 base 000000000000 mask FFFF80000000 write-back |
| [ 0.000000] 3 disabled |
| [ 0.000000] 4 disabled |
| [ 0.000000] 5 disabled |
| [ 0.000000] 6 disabled |
| [ 0.000000] 7 disabled |
| [ 0.000000] TOM2: 000000019f000000 aka 6640M |
| [ 0.000000] x86/PAT: Configuration [0-7]: WB WC UC- UC WB WP UC- WT |
| [ 0.000000] e820: last_pfn = 0xbfd6f max_arch_pfn = 0x400000000 |
| [ 0.000000] found SMP MP-table at [mem 0x000f5fa0-0x000f5faf] mapped at [ (ptrval)] |
| [ 0.000000] Scanning 1 areas for low memory corruption |
| [ 0.000000] Base memory trampoline at [ (ptrval)] 99000 size 24576 |
| [ 0.000000] Using GB pages for direct mapping |
| [ 0.000000] BRK [0x2763a000, 0x2763afff] PGTABLE |
| [ 0.000000] BRK [0x2763b000, 0x2763bfff] PGTABLE |
| [ 0.000000] BRK [0x2763c000, 0x2763cfff] PGTABLE |
| [ 0.000000] BRK [0x2763d000, 0x2763dfff] PGTABLE |
| [ 0.000000] BRK [0x2763e000, 0x2763efff] PGTABLE |
| [ 0.000000] RAMDISK: [mem 0x37219000-0x37903fff] |
| [ 0.000000] ACPI: Early table checksum verification disabled |
| [ 0.000000] ACPI: RSDP 0x00000000000F61B0 000024 (v02 CORE ) |
| [ 0.000000] ACPI: XSDT 0x00000000BFD830E0 000074 (v01 CORE COREBOOT 00000000 CORE 00000000) |
| [ 0.000000] ACPI: FACP 0x00000000BFD84EB0 0000F4 (v04 CORE COREBOOT 00000000 CORE 00000000) |
| [ 0.000000] ACPI: DSDT 0x00000000BFD83280 001C25 (v02 MSI COREBOOT 00010001 INTL 20161222) |
| [ 0.000000] ACPI: FACS 0x00000000BFD83240 000040 |
| [ 0.000000] ACPI: FACS 0x00000000BFD83240 000040 |
| [ 0.000000] ACPI: SSDT 0x00000000BFD84FB0 00008A (v02 CORE COREBOOT 0000002A CORE 0000002A) |
| [ 0.000000] ACPI: TCPA 0x00000000BFD85040 000032 (v02 CORE COREBOOT 00000000 CORE 00000000) |
| [ 0.000000] ACPI: APIC 0x00000000BFD85080 000072 (v01 CORE COREBOOT 00000000 CORE 00000000) |
| [ 0.000000] ACPI: VFCT 0x00000000BFD85100 00F269 (v01 CORE COREBOOT 00000000 CORE 00000000) |
| [ 0.000000] ACPI: HPET 0x00000000BFD94370 000038 (v01 CORE COREBOOT 00000000 CORE 00000000) |
| [ 0.000000] ACPI: HEST 0x00000000BFD943B0 0001D0 (v01 CORE COREBOOT 00000000 CORE 00000000) |
| [ 0.000000] ACPI: IVRS 0x00000000BFD94580 000070 (v02 AMD AMDIOMMU 00000001 AMD 00000000) |
| [ 0.000000] ACPI: SSDT 0x00000000BFD945F0 00051F (v02 AMD ALIB 00000001 MSFT 04000000) |
| [ 0.000000] ACPI: SSDT 0x00000000BFD94B10 000B9C (v01 AMD POWERNOW 00000001 AMD 00000001) |
| [ 0.000000] ACPI: Local APIC address 0xfee00000 |
| [ 0.000000] No NUMA configuration found |
| [ 0.000000] Faking a node at [mem 0x0000000000000000-0x000000019effffff] |
| [ 0.000000] NODE_DATA(0) allocated [mem 0x19effb000-0x19effdfff] |
| [ 0.000000] tsc: Fast TSC calibration using PIT |
| [ 0.000000] Zone ranges: |
| [ 0.000000] DMA [mem 0x0000000000001000-0x0000000000ffffff] |
| [ 0.000000] DMA32 [mem 0x0000000001000000-0x00000000ffffffff] |
| [ 0.000000] Normal [mem 0x0000000100000000-0x000000019effffff] |
| [ 0.000000] Device empty |
| [ 0.000000] Movable zone start for each node |
| [ 0.000000] Early memory node ranges |
| [ 0.000000] node 0: [mem 0x0000000000001000-0x000000000009efff] |
| [ 0.000000] node 0: [mem 0x0000000000100000-0x00000000bfd6efff] |
| [ 0.000000] node 0: [mem 0x0000000100000000-0x000000019effffff] |
| [ 0.000000] Initmem setup node 0 [mem 0x0000000000001000-0x000000019effffff] |
| [ 0.000000] On node 0 totalpages: 1436941 |
| [ 0.000000] DMA zone: 64 pages used for memmap |
| [ 0.000000] DMA zone: 21 pages reserved |
| [ 0.000000] DMA zone: 3998 pages, LIFO batch:0 |
| [ 0.000000] DMA32 zone: 12214 pages used for memmap |
| [ 0.000000] DMA32 zone: 781679 pages, LIFO batch:31 |
| [ 0.000000] Normal zone: 10176 pages used for memmap |
| [ 0.000000] Normal zone: 651264 pages, LIFO batch:31 |
| [ 0.000000] Reserved but unavailable: 98 pages |
| [ 0.000000] ACPI: PM-Timer IO Port: 0x818 |
| [ 0.000000] ACPI: Local APIC address 0xfee00000 |
| [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0xff] high edge lint[0x1]) |
| [ 0.000000] IOAPIC[0]: apic_id 4, version 33, address 0xfec00000, GSI 0-23 |
| [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) |
| [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 low level) |
| [ 0.000000] ACPI: IRQ0 used by override. |
| [ 0.000000] ACPI: IRQ9 used by override. |
| [ 0.000000] Using ACPI (MADT) for SMP configuration information |
| [ 0.000000] ACPI: HPET id: 0x10228210 base: 0xfed00000 |
| [ 0.000000] smpboot: Allowing 4 CPUs, 0 hotplug CPUs |
| [ 0.000000] PM: Registered nosave memory: [mem 0x00000000-0x00000fff] |
| [ 0.000000] PM: Registered nosave memory: [mem 0x0009f000-0x0009ffff] |
| [ 0.000000] PM: Registered nosave memory: [mem 0x000a0000-0x000effff] |
| [ 0.000000] PM: Registered nosave memory: [mem 0x000f0000-0x000fffff] |
| [ 0.000000] PM: Registered nosave memory: [mem 0xbfd6f000-0xdfffffff] |
| [ 0.000000] PM: Registered nosave memory: [mem 0xe0000000-0xf7ffffff] |
| [ 0.000000] PM: Registered nosave memory: [mem 0xf8000000-0xfbffffff] |
| [ 0.000000] PM: Registered nosave memory: [mem 0xfc000000-0xffffffff] |
| [ 0.000000] e820: [mem 0xe0000000-0xf7ffffff] available for PCI devices |
| [ 0.000000] Booting paravirtualized kernel on bare hardware |
| [ 0.000000] clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 1910969940391419 ns |
| [ 0.000000] setup_percpu: NR_CPUS:320 nr_cpumask_bits:320 nr_cpu_ids:4 nr_node_ids:1 |
| [ 0.000000] percpu: Embedded 45 pages/cpu @ (ptrval) s147456 r8192 d28672 u524288 |
| [ 0.000000] pcpu-alloc: s147456 r8192 d28672 u524288 alloc=1*2097152 |
| [ 0.000000] pcpu-alloc: [0] 0 1 2 3 |
| [ 0.000000] Built 1 zonelists, mobility grouping on. Total pages: 1414466 |
| [ 0.000000] Policy zone: Normal |
| [ 0.000000] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-linux root=UUID=e2350c90-39db-4509-a4b4-a28b062d87a0 rw console=ttyS0,115200 |
| [ 0.000000] Calgary: detecting Calgary via BIOS EBDA area |
| [ 0.000000] Calgary: Unable to locate Rio Grande table in EBDA - bailing! |
| [ 0.000000] Memory: 5560932K/5747764K available (10252K kernel code, 1250K rwdata, 3224K rodata, 1428K init, 632K bss, 186832K reserved, 0K cma-reserved) |
| [ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1 |
| [ 0.000000] ftrace: allocating 31420 entries in 123 pages |
| [ 0.000000] Preemptible hierarchical RCU implementation. |
| [ 0.000000] CONFIG_RCU_FANOUT set to non-default value of 32 |
| [ 0.000000] RCU dyntick-idle grace-period acceleration is enabled. |
| [ 0.000000] RCU restricting CPUs from NR_CPUS=320 to nr_cpu_ids=4. |
| [ 0.000000] RCU priority boosting: priority 1 delay 500 ms. |
| [ 0.000000] Tasks RCU enabled. |
| [ 0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=4 |
| [ 0.000000] NR_IRQS: 20736, nr_irqs: 456, preallocated irqs: 16 |
| [ 0.000000] Offload RCU callbacks from CPUs: . |
| [ 0.000000] spurious 8259A interrupt: IRQ7. |
| [ 0.000000] Console: colour dummy device 80x25 |
| [ 0.000000] console [ttyS0] enabled |
| [ 0.000000] ACPI: Core revision 20170831 |
| [ 0.000000] ACPI: 4 ACPI AML tables successfully acquired and loaded |
| [ 0.000000] clocksource: hpet: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 133484873504 ns |
| [ 0.000000] hpet clockevent registered |
| [ 0.000000] APIC: Switch to symmetric I/O mode setup |
| [ 0.002000] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1 |
| [ 0.007000] tsc: Fast TSC calibration using PIT |
| [ 0.008000] tsc: Detected 3500.054 MHz processor |
| [ 0.008000] Calibrating delay loop (skipped), value calculated using timer frequency.. 7000.10 BogoMIPS (lpj=3500054) |
| [ 0.008000] pid_max: default: 32768 minimum: 301 |
| [ 0.008000] Security Framework initialized |
| [ 0.008000] Yama: becoming mindful. |
| [ 0.011246] Dentry cache hash table entries: 1048576 (order: 11, 8388608 bytes) |
| [ 0.012533] Inode-cache hash table entries: 524288 (order: 10, 4194304 bytes) |
| [ 0.012593] Mount-cache hash table entries: 16384 (order: 5, 131072 bytes) |
| [ 0.012633] Mountpoint-cache hash table entries: 16384 (order: 5, 131072 bytes) |
| [ 0.012858] CPU: Physical Processor ID: 0 |
| [ 0.012860] CPU: Processor Core ID: 0 |
| [ 0.012861] mce: CPU supports 7 MCE banks |
| [ 0.012872] Last level iTLB entries: 4KB 512, 2MB 1024, 4MB 512 |
| [ 0.012873] Last level dTLB entries: 4KB 1024, 2MB 1024, 4MB 512, 1GB 0 |
| [ 0.012874] Spectre V2 : Mitigation: Full AMD retpoline |
| [ 0.012875] Spectre V2 : Spectre v2 mitigation: Filling RSB on context switch |
| [ 0.012964] Freeing SMP alternatives memory: 24K |
| [ 0.014000] smpboot: CPU0: AMD A8-6500 APU with Radeon(tm) HD Graphics (family: 0x15, model: 0x13, stepping: 0x1) |
| [ 0.017035] Performance Events: Fam15h core perfctr, AMD PMU driver. |
| [ 0.017042] ... version: 0 |
| [ 0.017043] ... bit width: 48 |
| [ 0.017044] ... generic registers: 6 |
| [ 0.017044] ... value mask: 0000ffffffffffff |
| [ 0.017045] ... max period: 00007fffffffffff |
| [ 0.017046] ... fixed-purpose events: 0 |
| [ 0.017046] ... event mask: 000000000000003f |
| [ 0.019027] Hierarchical SRCU implementation. |
| [ 0.025122] NMI watchdog: Enabled. Permanently consumes one hw-PMU counter. |
| [ 0.027025] smp: Bringing up secondary CPUs ... |
| [ 0.036049] x86: Booting SMP configuration: |
| [ 0.036051] .... node #0, CPUs: #1 |
| [ 0.001000] do_IRQ: 1.55 No irq handler for vector |
| [ 0.051045] #2 |
| [ 0.001000] do_IRQ: 2.55 No irq handler for vector |
| [ 0.066057] #3 |
| [ 0.001000] do_IRQ: 3.55 No irq handler for vector |
| [ 0.072040] smp: Brought up 1 node, 4 CPUs |
| [ 0.072040] smpboot: Max logical packages: 1 |
| [ 0.072040] smpboot: Total of 4 processors activated (28000.43 BogoMIPS) |
| [ 0.073075] devtmpfs: initialized |
| [ 0.073075] x86/mm: Memory block size: 128MB |
| [ 0.074012] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 1911260446275000 ns |
| [ 0.074024] futex hash table entries: 1024 (order: 4, 65536 bytes) |
| [ 0.074117] pinctrl core: initialized pinctrl subsystem |
| [ 0.074218] RTC time: 6:26:39, date: 04/10/18 |
| [ 0.074350] NET: Registered protocol family 16 |
| [ 0.076040] cpuidle: using governor ladder |
| [ 0.077038] cpuidle: using governor menu |
| [ 0.077069] ACPI: bus type PCI registered |
| [ 0.077072] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5 |
| [ 0.077143] PCI: Using configuration type 1 for base access |
| [ 0.077143] PCI: Using configuration type 1 for extended access |
| [ 0.077213] mtrr: your CPUs had inconsistent variable MTRR settings |
| [ 0.077213] mtrr: probably your BIOS does not setup all CPUs. |
| [ 0.077214] mtrr: corrected configuration. |
| [ 0.078416] HugeTLB registered 1.00 GiB page size, pre-allocated 0 pages |
| [ 0.078416] HugeTLB registered 2.00 MiB page size, pre-allocated 0 pages |
| [ 0.079013] ACPI: Added _OSI(Module Device) |
| [ 0.079015] ACPI: Added _OSI(Processor Device) |
| [ 0.079015] ACPI: Added _OSI(3.0 _SCP Extensions) |
| [ 0.079016] ACPI: Added _OSI(Processor Aggregator Device) |
| [ 0.079181] ACPI: Executed 2 blocks of module-level executable AML code |
| [ 1.882476] ACPI: Interpreter enabled |
| [ 1.882495] ACPI: (supports S0 S1 S4 S5) |
| [ 1.882497] ACPI: Using IOAPIC for interrupt routing |
| [ 1.882514] HEST: Table parsing has been initialized. |
| [ 1.882516] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug |
| [ 1.882655] ACPI: Enabled 8 GPEs in block 00 to 1F |
| [ 1.885761] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff]) |
| [ 1.885767] acpi PNP0A03:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI] |
| [ 1.885859] acpi PNP0A03:00: _OSC: OS now controls [PCIeHotplug PME AER PCIeCapability] |
| [ 1.885916] acpi PNP0A03:00: host bridge window expanded to [io 0x0000-0x0cf7 window]; [io 0x03b0-0x03df window] ignored |
| [ 1.886139] PCI host bridge to bus 0000:00 |
| [ 1.886141] pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7 window] |
| [ 1.886142] pci_bus 0000:00: root bus resource [io 0x0d00-0xffff window] |
| [ 1.886144] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff] |
| [ 1.886145] pci_bus 0000:00: root bus resource [mem 0x000c0000-0x000dffff] |
| [ 1.886146] pci_bus 0000:00: root bus resource [mem 0xe0000000-0xffffffff] |
| [ 1.886148] pci_bus 0000:00: root bus resource [bus 00-ff] |
| [ 1.886155] pci 0000:00:00.0: [1022:1410] type 00 class 0x060000 |
| [ 1.886251] pci 0000:00:00.2: [1022:1419] type 00 class 0x080600 |
| [ 1.886352] pci 0000:00:01.0: [1002:990e] type 00 class 0x030000 |
| [ 1.886364] pci 0000:00:01.0: reg 0x10: [mem 0xe0000000-0xefffffff pref] |
| [ 1.886368] pci 0000:00:01.0: reg 0x14: [io 0x3000-0x30ff] |
| [ 1.886372] pci 0000:00:01.0: reg 0x18: [mem 0xf0480000-0xf04bffff] |
| [ 1.886387] pci 0000:00:01.0: enabling Extended Tags |
| [ 1.886409] pci 0000:00:01.0: supports D1 D2 |
| [ 1.886486] pci 0000:00:01.1: [1002:9902] type 00 class 0x040300 |
| [ 1.886497] pci 0000:00:01.1: reg 0x10: [mem 0xf04c0000-0xf04c3fff] |
| [ 1.886517] pci 0000:00:01.1: enabling Extended Tags |
| [ 1.886538] pci 0000:00:01.1: supports D1 D2 |
| [ 1.886611] pci 0000:00:04.0: [1022:1414] type 01 class 0x060400 |
| [ 1.886631] pci 0000:00:04.0: enabling Extended Tags |
| [ 1.886654] pci 0000:00:04.0: PME# supported from D0 D3hot D3cold |
| [ 1.886736] pci 0000:00:06.0: [1022:1416] type 01 class 0x060400 |
| [ 1.886755] pci 0000:00:06.0: enabling Extended Tags |
| [ 1.886778] pci 0000:00:06.0: PME# supported from D0 D3hot D3cold |
| [ 1.886874] pci 0000:00:10.0: [1022:7812] type 00 class 0x0c0330 |
| [ 1.886899] pci 0000:00:10.0: reg 0x10: [mem 0xf04c8000-0xf04c9fff 64bit] |
| [ 1.887002] pci 0000:00:10.0: PME# supported from D0 D3hot D3cold |
| [ 1.887100] pci 0000:00:10.1: [1022:7812] type 00 class 0x0c0330 |
| [ 1.887125] pci 0000:00:10.1: reg 0x10: [mem 0xf04ca000-0xf04cbfff 64bit] |
| [ 1.887215] pci 0000:00:10.1: PME# supported from D0 D3hot D3cold |
| [ 1.887313] pci 0000:00:11.0: [1022:7801] type 00 class 0x010601 |
| [ 1.887329] pci 0000:00:11.0: reg 0x10: [io 0x3410-0x3417] |
| [ 1.887337] pci 0000:00:11.0: reg 0x14: [io 0x3420-0x3423] |
| [ 1.887344] pci 0000:00:11.0: reg 0x18: [io 0x3418-0x341f] |
| [ 1.887351] pci 0000:00:11.0: reg 0x1c: [io 0x3424-0x3427] |
| [ 1.887359] pci 0000:00:11.0: reg 0x20: [io 0x3400-0x340f] |
| [ 1.887366] pci 0000:00:11.0: reg 0x24: [mem 0xf04cf000-0xf04cf7ff] |
| [ 1.887461] pci 0000:00:12.0: [1022:7807] type 00 class 0x0c0310 |
| [ 1.887475] pci 0000:00:12.0: reg 0x10: [mem 0xf04cc000-0xf04ccfff] |
| [ 1.887596] pci 0000:00:12.2: [1022:7808] type 00 class 0x0c0320 |
| [ 1.887613] pci 0000:00:12.2: reg 0x10: [mem 0xf04d0000-0xf04d00ff] |
| [ 1.887676] pci 0000:00:12.2: supports D1 D2 |
| [ 1.887678] pci 0000:00:12.2: PME# supported from D0 D1 D2 D3hot |
| [ 1.887758] pci 0000:00:13.0: [1022:7807] type 00 class 0x0c0310 |
| [ 1.887772] pci 0000:00:13.0: reg 0x10: [mem 0xf04cd000-0xf04cdfff] |
| [ 1.887891] pci 0000:00:13.2: [1022:7808] type 00 class 0x0c0320 |
| [ 1.887908] pci 0000:00:13.2: reg 0x10: [mem 0xf04d1000-0xf04d10ff] |
| [ 1.887972] pci 0000:00:13.2: supports D1 D2 |
| [ 1.887973] pci 0000:00:13.2: PME# supported from D0 D1 D2 D3hot |
| [ 1.888072] pci 0000:00:14.0: [1022:780b] type 00 class 0x0c0500 |
| [ 1.888195] pci 0000:00:14.2: [1022:780d] type 00 class 0x040300 |
| [ 1.888215] pci 0000:00:14.2: reg 0x10: [mem 0xf04c4000-0xf04c7fff 64bit] |
| [ 1.888268] pci 0000:00:14.2: PME# supported from D0 D3hot D3cold |
| [ 1.888342] pci 0000:00:14.3: [1022:780e] type 00 class 0x060100 |
| [ 1.888467] pci 0000:00:14.4: [1022:780f] type 01 class 0x060401 |
| [ 1.888570] pci 0000:00:14.5: [1022:7809] type 00 class 0x0c0310 |
| [ 1.888585] pci 0000:00:14.5: reg 0x10: [mem 0xf04ce000-0xf04cefff] |
| [ 1.888701] pci 0000:00:18.0: [1022:1400] type 00 class 0x060000 |
| [ 1.888776] pci 0000:00:18.1: [1022:1401] type 00 class 0x060000 |
| [ 1.888849] pci 0000:00:18.2: [1022:1402] type 00 class 0x060000 |
| [ 1.888924] pci 0000:00:18.3: [1022:1403] type 00 class 0x060000 |
| [ 1.889012] pci 0000:00:18.4: [1022:1404] type 00 class 0x060000 |
| [ 1.889087] pci 0000:00:18.5: [1022:1405] type 00 class 0x060000 |
| [ 1.889205] pci 0000:01:00.0: [10ec:8168] type 00 class 0x020000 |
| [ 1.889226] pci 0000:01:00.0: reg 0x10: [io 0x1000-0x10ff] |
| [ 1.889246] pci 0000:01:00.0: reg 0x18: [mem 0xf0004000-0xf0004fff 64bit pref] |
| [ 1.889258] pci 0000:01:00.0: reg 0x20: [mem 0xf0000000-0xf0003fff 64bit pref] |
| [ 1.889326] pci 0000:01:00.0: supports D1 D2 |
| [ 1.889327] pci 0000:01:00.0: PME# supported from D0 D1 D2 D3hot D3cold |
| [ 1.892050] pci 0000:00:04.0: PCI bridge to [bus 01] |
| [ 1.892056] pci 0000:00:04.0: bridge window [io 0x1000-0x1fff] |
| [ 1.892060] pci 0000:00:04.0: bridge window [mem 0xf0000000-0xf00fffff 64bit pref] |
| [ 1.892130] pci 0000:02:00.0: [10ec:8168] type 00 class 0x020000 |
| [ 1.892153] pci 0000:02:00.0: reg 0x10: [io 0x2000-0x20ff] |
| [ 1.892172] pci 0000:02:00.0: reg 0x18: [mem 0xf0200000-0xf0200fff 64bit] |
| [ 1.892185] pci 0000:02:00.0: reg 0x20: [mem 0xf0100000-0xf0103fff 64bit pref] |
| [ 1.892264] pci 0000:02:00.0: supports D1 D2 |
| [ 1.892265] pci 0000:02:00.0: PME# supported from D0 D1 D2 D3hot D3cold |
| [ 1.895050] pci 0000:00:06.0: PCI bridge to [bus 02] |
| [ 1.895056] pci 0000:00:06.0: bridge window [io 0x2000-0x2fff] |
| [ 1.895058] pci 0000:00:06.0: bridge window [mem 0xf0200000-0xf02fffff] |
| [ 1.895061] pci 0000:00:06.0: bridge window [mem 0xf0100000-0xf01fffff 64bit pref] |
| [ 1.895134] pci 0000:03:05.0: [1131:7134] type 00 class 0x048000 |
| [ 1.895158] pci 0000:03:05.0: reg 0x10: [mem 0xf0300000-0xf03003ff] |
| [ 1.895253] pci 0000:03:05.0: supports D1 D2 |
| [ 1.895322] pci 0000:00:14.4: PCI bridge to [bus 03] (subtractive decode) |
| [ 1.895327] pci 0000:00:14.4: bridge window [mem 0xf0300000-0xf03fffff] |
| [ 1.895331] pci 0000:00:14.4: bridge window [io 0x0000-0x0cf7 window] (subtractive decode) |
| [ 1.895333] pci 0000:00:14.4: bridge window [io 0x0d00-0xffff window] (subtractive decode) |
| [ 1.895334] pci 0000:00:14.4: bridge window [mem 0x000a0000-0x000bffff] (subtractive decode) |
| [ 1.895335] pci 0000:00:14.4: bridge window [mem 0x000c0000-0x000dffff] (subtractive decode) |
| [ 1.895337] pci 0000:00:14.4: bridge window [mem 0xe0000000-0xffffffff] (subtractive decode) |
| [ 1.895588] ACPI: PCI Interrupt Link [INTA] (IRQs 3 4 5 7 10 11 12 15) *0 |
| [ 1.895647] ACPI: PCI Interrupt Link [INTB] (IRQs 3 4 5 7 10 11 12 15) *0 |
| [ 1.895704] ACPI: PCI Interrupt Link [INTC] (IRQs 3 4 5 7 10 11 12 15) *0 |
| [ 1.895760] ACPI: PCI Interrupt Link [INTD] (IRQs 3 4 5 7 10 11 12 15) *0 |
| [ 1.895815] ACPI: PCI Interrupt Link [INTE] (IRQs 3 4 5 7 10 11 12 15) *0 |
| [ 1.895871] ACPI: PCI Interrupt Link [INTF] (IRQs 9) *0 |
| [ 1.895924] ACPI: PCI Interrupt Link [INTG] (IRQs 3 4 5 7 10 11 12 15) *0 |
| [ 1.896035] ACPI: PCI Interrupt Link [INTH] (IRQs 3 4 5 7 10 11 12 15) *0 |
| [ 1.896214] pci 0000:00:01.0: vgaarb: setting as boot VGA device |
| [ 1.896214] pci 0000:00:01.0: vgaarb: VGA device added: decodes=io+mem,owns=io+mem,locks=none |
| [ 1.896214] pci 0000:00:01.0: vgaarb: bridge control possible |
| [ 1.896214] vgaarb: loaded |
| [ 1.896214] EDAC MC: Ver: 3.0.0 |
| [ 1.896279] PCI: Using ACPI for IRQ routing |
| [ 1.896279] PCI: pci_cache_line_size set to 64 bytes |
| [ 1.896279] e820: reserve RAM buffer [mem 0x0009fc00-0x0009ffff] |
| [ 1.896279] e820: reserve RAM buffer [mem 0xbfd6f000-0xbfffffff] |
| [ 1.896279] e820: reserve RAM buffer [mem 0x19f000000-0x19fffffff] |
| [ 1.896279] NetLabel: Initializing |
| [ 1.896279] NetLabel: domain hash size = 128 |
| [ 1.896279] NetLabel: protocols = UNLABELED CIPSOv4 CALIPSO |
| [ 1.896279] NetLabel: unlabeled traffic allowed by default |
| [ 1.896279] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0 |
| [ 1.896279] hpet0: 3 comparators, 32-bit 14.318180 MHz counter |
| [ 1.898068] clocksource: Switched to clocksource hpet |
| [ 1.912349] VFS: Disk quotas dquot_6.6.0 |
| [ 1.912367] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes) |
| [ 1.912449] pnp: PnP ACPI init |
| [ 1.912657] system 00:00: [mem 0xfec10002-0xfec11001] has been reserved |
| [ 1.912662] system 00:00: Plug and Play ACPI device, IDs PNP0c02 (active) |
| [ 1.912689] pnp 00:01: Plug and Play ACPI device, IDs PNP0b00 (active) |
| [ 1.912841] pnp: PnP ACPI: found 2 devices |
| [ 1.919608] clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns |
| [ 1.919628] pci 0000:00:04.0: PCI bridge to [bus 01] |
| [ 1.919630] pci 0000:00:04.0: bridge window [io 0x1000-0x1fff] |
| [ 1.919634] pci 0000:00:04.0: bridge window [mem 0xf0000000-0xf00fffff 64bit pref] |
| [ 1.919637] pci 0000:00:06.0: PCI bridge to [bus 02] |
| [ 1.919639] pci 0000:00:06.0: bridge window [io 0x2000-0x2fff] |
| [ 1.919641] pci 0000:00:06.0: bridge window [mem 0xf0200000-0xf02fffff] |
| [ 1.919643] pci 0000:00:06.0: bridge window [mem 0xf0100000-0xf01fffff 64bit pref] |
| [ 1.919646] pci 0000:00:14.4: PCI bridge to [bus 03] |
| [ 1.919650] pci 0000:00:14.4: bridge window [mem 0xf0300000-0xf03fffff] |
| [ 1.919658] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7 window] |
| [ 1.919659] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff window] |
| [ 1.919661] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff] |
| [ 1.919662] pci_bus 0000:00: resource 7 [mem 0x000c0000-0x000dffff] |
| [ 1.919663] pci_bus 0000:00: resource 8 [mem 0xe0000000-0xffffffff] |
| [ 1.919665] pci_bus 0000:01: resource 0 [io 0x1000-0x1fff] |
| [ 1.919666] pci_bus 0000:01: resource 2 [mem 0xf0000000-0xf00fffff 64bit pref] |
| [ 1.919667] pci_bus 0000:02: resource 0 [io 0x2000-0x2fff] |
| [ 1.919669] pci_bus 0000:02: resource 1 [mem 0xf0200000-0xf02fffff] |
| [ 1.919670] pci_bus 0000:02: resource 2 [mem 0xf0100000-0xf01fffff 64bit pref] |
| [ 1.919671] pci_bus 0000:03: resource 1 [mem 0xf0300000-0xf03fffff] |
| [ 1.919673] pci_bus 0000:03: resource 4 [io 0x0000-0x0cf7 window] |
| [ 1.919674] pci_bus 0000:03: resource 5 [io 0x0d00-0xffff window] |
| [ 1.919675] pci_bus 0000:03: resource 6 [mem 0x000a0000-0x000bffff] |
| [ 1.919676] pci_bus 0000:03: resource 7 [mem 0x000c0000-0x000dffff] |
| [ 1.919678] pci_bus 0000:03: resource 8 [mem 0xe0000000-0xffffffff] |
| [ 1.919724] NET: Registered protocol family 2 |
| [ 1.919897] TCP established hash table entries: 65536 (order: 7, 524288 bytes) |
| [ 1.920110] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes) |
| [ 1.920388] TCP: Hash tables configured (established 65536 bind 65536) |
| [ 1.920445] UDP hash table entries: 4096 (order: 5, 131072 bytes) |
| [ 1.920489] UDP-Lite hash table entries: 4096 (order: 5, 131072 bytes) |
| [ 1.920575] NET: Registered protocol family 1 |
| [ 1.920593] pci 0000:00:01.0: Video device with shadowed ROM at [mem 0x000c0000-0x000dffff] |
| [ 1.921273] pci 0000:00:12.2: PME# does not work under D3, disabling it |
| [ 1.922477] pci 0000:00:13.2: PME# does not work under D3, disabling it |
| [ 1.922640] PCI: CLS 64 bytes, default 64 |
| [ 1.922683] Unpacking initramfs... |
| [ 2.023430] Freeing initrd memory: 7084K |
| [ 2.023446] AMD-Vi: Applying erratum 746 workaround for IOMMU at 0000:00:00.2 |
| [ 2.023805] iommu: Adding device 0000:00:01.0 to group 0 |
| [ 2.023821] iommu: Adding device 0000:00:01.1 to group 0 |
| [ 2.023888] iommu: Adding device 0000:00:04.0 to group 1 |
| [ 2.023952] iommu: Adding device 0000:00:06.0 to group 2 |
| [ 2.024060] iommu: Adding device 0000:00:10.0 to group 3 |
| [ 2.024078] iommu: Adding device 0000:00:10.1 to group 3 |
| [ 2.024141] iommu: Adding device 0000:00:11.0 to group 4 |
| [ 2.024221] iommu: Adding device 0000:00:12.0 to group 5 |
| [ 2.024236] iommu: Adding device 0000:00:12.2 to group 5 |
| [ 2.024310] iommu: Adding device 0000:00:13.0 to group 6 |
| [ 2.024324] iommu: Adding device 0000:00:13.2 to group 6 |
| [ 2.024411] iommu: Adding device 0000:00:14.0 to group 7 |
| [ 2.024426] iommu: Adding device 0000:00:14.2 to group 7 |
| [ 2.024441] iommu: Adding device 0000:00:14.3 to group 7 |
| [ 2.024506] iommu: Adding device 0000:00:14.4 to group 8 |
| [ 2.024575] iommu: Adding device 0000:00:14.5 to group 9 |
| [ 2.024671] iommu: Adding device 0000:00:18.0 to group 10 |
| [ 2.024686] iommu: Adding device 0000:00:18.1 to group 10 |
| [ 2.024702] iommu: Adding device 0000:00:18.2 to group 10 |
| [ 2.024717] iommu: Adding device 0000:00:18.3 to group 10 |
| [ 2.024733] iommu: Adding device 0000:00:18.4 to group 10 |
| [ 2.024749] iommu: Adding device 0000:00:18.5 to group 10 |
| [ 2.024761] iommu: Adding device 0000:01:00.0 to group 1 |
| [ 2.024772] iommu: Adding device 0000:02:00.0 to group 2 |
| [ 2.024779] iommu: Adding device 0000:03:05.0 to group 8 |
| [ 2.025270] AMD-Vi: Found IOMMU at 0000:00:00.2 cap 0x40 |
| [ 2.025271] AMD-Vi: Extended features (0x800000853): |
| [ 2.025272] PreF PPR GT IA |
| [ 2.025274] AMD-Vi: Interrupt remapping enabled |
| [ 2.025460] AMD-Vi: Lazy IO/TLB flushing enabled |
| [ 2.027299] amd_uncore: AMD NB counters detected |
| [ 2.027474] LVT offset 0 assigned for vector 0x400 |
| [ 2.027531] perf: AMD IBS detected (0x000000ff) |
| [ 2.027587] Scanning for low memory corruption every 60 seconds |
| [ 2.028113] Initialise system trusted keyrings |
| [ 2.028122] Key type blacklist registered |
| [ 2.028251] workingset: timestamp_bits=44 max_order=21 bucket_order=0 |
| [ 2.029392] zbud: loaded |
| [ 2.031461] Key type asymmetric registered |
| [ 2.031462] Asymmetric key parser 'x509' registered |
| [ 2.031488] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 247) |
| [ 2.031543] io scheduler noop registered |
| [ 2.031544] io scheduler deadline registered |
| [ 2.031585] io scheduler cfq registered (default) |
| [ 2.031586] io scheduler mq-deadline registered |
| [ 2.031586] io scheduler kyber registered |
| [ 2.031608] io scheduler bfq registered |
| [ 2.032046] pcieport 0000:00:06.0: can't derive routing for PCI INT A |
| [ 2.032047] pcieport 0000:00:06.0: PCI INT A: no GSI |
| [ 2.032139] pcieport 0000:00:04.0: Signaling PME with IRQ 25 |
| [ 2.032155] pcieport 0000:00:06.0: Signaling PME with IRQ 26 |
| [ 2.032204] vesafb: mode is 1680x1050x32, linelength=6912, pages=0 |
| [ 2.032204] vesafb: scrolling: redraw |
| [ 2.032206] vesafb: Truecolor: size=0:8:8:8, shift=0:16:8:0 |
| [ 2.032219] vesafb: framebuffer at 0xe0000000, mapped to 0x000000003995a739, using 7104k, total 7104k |
| [ 2.054857] Console: switching to colour frame buffer device 210x65 |
| [ 2.077145] fb0: VESA VGA frame buffer device |
| [ 2.077234] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input0 |
| [ 2.077329] ACPI: Power Button [PWRB] |
| [ 2.077386] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input1 |
| [ 2.077423] ACPI: Power Button [PWRF] |
| [ 2.077919] GHES: Failed to enable APEI firmware first mode. |
| [ 2.078061] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled |
| [ 2.098634] serial8250: ttyS0 at I/O 0x3f8 (irq = 4, base_baud = 115200) is a 16550A |
| [ 2.099575] ledtrig-cpu: registered to indicate activity on CPUs |
| [ 2.099798] NET: Registered protocol family 10 |
| [ 2.104046] Segment Routing with IPv6 |
| [ 2.104070] NET: Registered protocol family 17 |
| [ 2.104347] RAS: Correctable Errors collector initialized. |
| [ 2.104386] microcode: CPU0: patch_level=0x00000000 |
| [ 2.104393] microcode: CPU1: patch_level=0x00000000 |
| [ 2.104403] microcode: CPU2: patch_level=0x00000000 |
| [ 2.104413] microcode: CPU3: patch_level=0x00000000 |
| [ 2.104464] microcode: Microcode Update Driver: v2.2. |
| [ 2.104475] sched_clock: Marking stable (2104457537, 0)->(2200116387, -95658850) |
| [ 2.104743] registered taskstats version 1 |
| [ 2.104751] Loading compiled-in X.509 certificates |
| [ 2.104768] zswap: loaded using pool lzo/zbud |
| [ 2.108186] Key type big_key registered |
| [ 2.108469] Magic number: 14:745:417 |
| [ 2.108528] hctosys: unable to open rtc device (rtc0) |
| [ 2.110906] Freeing unused kernel memory: 1428K |
| [ 2.110907] Write protecting the kernel read-only data: 16384k |
| [ 2.111702] Freeing unused kernel memory: 2016K |
| [ 2.113824] Freeing unused kernel memory: 872K |
| [ 2.186238] ACPI: bus type USB registered |
| [ 2.186263] usbcore: registered new interface driver usbfs |
| [ 2.186273] usbcore: registered new interface driver hub |
| [ 2.186304] usbcore: registered new device driver usb |
| [ 2.188980] SCSI subsystem initialized |
| [ 2.193923] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver |
| [ 2.194250] ehci-pci: EHCI PCI platform driver |
| [ 2.194433] QUIRK: Enable AMD PLL fix |
| [ 2.194458] ehci-pci 0000:00:12.2: EHCI Host Controller |
| [ 2.194464] ehci-pci 0000:00:12.2: new USB bus registered, assigned bus number 1 |
| [ 2.194470] ehci-pci 0000:00:12.2: applying AMD SB700/SB800/Hudson-2/3 EHCI dummy qh workaround |
| [ 2.194478] ehci-pci 0000:00:12.2: debug port 1 |
| [ 2.194533] ehci-pci 0000:00:12.2: irq 17, io mem 0xf04d0000 |
| [ 2.194956] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver |
| [ 2.195311] libata version 3.00 loaded. |
| [ 2.201020] ehci-pci 0000:00:12.2: USB 2.0 started, EHCI 1.00 |
| [ 2.201081] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002 |
| [ 2.201083] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 |
| [ 2.201085] usb usb1: Product: EHCI Host Controller |
| [ 2.201086] usb usb1: Manufacturer: Linux 4.15.9-1-ARCH ehci_hcd |
| [ 2.201088] usb usb1: SerialNumber: 0000:00:12.2 |
| [ 2.201232] hub 1-0:1.0: USB hub found |
| [ 2.201240] hub 1-0:1.0: 5 ports detected |
| [ 2.201602] ehci-pci 0000:00:13.2: EHCI Host Controller |
| [ 2.201611] ehci-pci 0000:00:13.2: new USB bus registered, assigned bus number 2 |
| [ 2.201615] ehci-pci 0000:00:13.2: applying AMD SB700/SB800/Hudson-2/3 EHCI dummy qh workaround |
| [ 2.201624] ehci-pci 0000:00:13.2: debug port 1 |
| [ 2.201662] ehci-pci 0000:00:13.2: irq 17, io mem 0xf04d1000 |
| [ 2.208126] ehci-pci 0000:00:13.2: USB 2.0 started, EHCI 1.00 |
| [ 2.208199] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002 |
| [ 2.208201] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1 |
| [ 2.208203] usb usb2: Product: EHCI Host Controller |
| [ 2.208204] usb usb2: Manufacturer: Linux 4.15.9-1-ARCH ehci_hcd |
| [ 2.208205] usb usb2: SerialNumber: 0000:00:13.2 |
| [ 2.208359] hub 2-0:1.0: USB hub found |
| [ 2.208367] hub 2-0:1.0: 5 ports detected |
| [ 2.208878] xhci_hcd 0000:00:10.0: xHCI Host Controller |
| [ 2.208885] xhci_hcd 0000:00:10.0: new USB bus registered, assigned bus number 3 |
| [ 2.208978] ohci-pci: OHCI PCI platform driver |
| [ 2.209104] xhci_hcd 0000:00:10.0: hcc params 0x014042c3 hci version 0x96 quirks 0x00000608 |
| [ 2.209422] usb usb3: New USB device found, idVendor=1d6b, idProduct=0002 |
| [ 2.209424] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1 |
| [ 2.209425] usb usb3: Product: xHCI Host Controller |
| [ 2.209427] usb usb3: Manufacturer: Linux 4.15.9-1-ARCH xhci-hcd |
| [ 2.209429] usb usb3: SerialNumber: 0000:00:10.0 |
| [ 2.209649] hub 3-0:1.0: USB hub found |
| [ 2.209660] hub 3-0:1.0: 2 ports detected |
| [ 2.209797] xhci_hcd 0000:00:10.0: xHCI Host Controller |
| [ 2.209800] xhci_hcd 0000:00:10.0: new USB bus registered, assigned bus number 4 |
| [ 2.212518] usb usb4: We don't know the algorithms for LPM for this host, disabling LPM. |
| [ 2.212545] usb usb4: New USB device found, idVendor=1d6b, idProduct=0003 |
| [ 2.212547] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1 |
| [ 2.212548] usb usb4: Product: xHCI Host Controller |
| [ 2.212549] usb usb4: Manufacturer: Linux 4.15.9-1-ARCH xhci-hcd |
| [ 2.212551] usb usb4: SerialNumber: 0000:00:10.0 |
| [ 2.212800] hub 4-0:1.0: USB hub found |
| [ 2.212812] hub 4-0:1.0: 2 ports detected |
| [ 2.213151] xhci_hcd 0000:00:10.1: xHCI Host Controller |
| [ 2.213159] xhci_hcd 0000:00:10.1: new USB bus registered, assigned bus number 5 |
| [ 2.213348] xhci_hcd 0000:00:10.1: hcc params 0x014042c3 hci version 0x96 quirks 0x00000608 |
| [ 2.213629] usb usb5: New USB device found, idVendor=1d6b, idProduct=0002 |
| [ 2.213631] usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1 |
| [ 2.213632] usb usb5: Product: xHCI Host Controller |
| [ 2.213633] usb usb5: Manufacturer: Linux 4.15.9-1-ARCH xhci-hcd |
| [ 2.213634] usb usb5: SerialNumber: 0000:00:10.1 |
| [ 2.213791] hub 5-0:1.0: USB hub found |
| [ 2.213800] hub 5-0:1.0: 2 ports detected |
| [ 2.213917] xhci_hcd 0000:00:10.1: xHCI Host Controller |
| [ 2.213922] xhci_hcd 0000:00:10.1: new USB bus registered, assigned bus number 6 |
| [ 2.216765] usb usb6: We don't know the algorithms for LPM for this host, disabling LPM. |
| [ 2.216789] usb usb6: New USB device found, idVendor=1d6b, idProduct=0003 |
| [ 2.216791] usb usb6: New USB device strings: Mfr=3, Product=2, SerialNumber=1 |
| [ 2.216792] usb usb6: Product: xHCI Host Controller |
| [ 2.216793] usb usb6: Manufacturer: Linux 4.15.9-1-ARCH xhci-hcd |
| [ 2.216794] usb usb6: SerialNumber: 0000:00:10.1 |
| [ 2.217041] hub 6-0:1.0: USB hub found |
| [ 2.217053] hub 6-0:1.0: 2 ports detected |
| [ 2.217221] ahci 0000:00:11.0: version 3.0 |
| [ 2.217488] ahci 0000:00:11.0: AHCI 0001.0300 32 slots 6 ports 6 Gbps 0x3f impl SATA mode |
| [ 2.217491] ahci 0000:00:11.0: flags: 64bit ncq sntf ilck led clo pio |
| [ 2.218896] scsi host0: ahci |
| [ 2.219154] scsi host1: ahci |
| [ 2.219361] scsi host2: ahci |
| [ 2.219497] scsi host3: ahci |
| [ 2.219645] scsi host4: ahci |
| [ 2.219776] scsi host5: ahci |
| [ 2.219832] ata1: SATA max UDMA/133 abar m2048@0xf04cf000 port 0xf04cf100 irq 19 |
| [ 2.219835] ata2: SATA max UDMA/133 abar m2048@0xf04cf000 port 0xf04cf180 irq 19 |
| [ 2.219838] ata3: SATA max UDMA/133 abar m2048@0xf04cf000 port 0xf04cf200 irq 19 |
| [ 2.219840] ata4: SATA max UDMA/133 abar m2048@0xf04cf000 port 0xf04cf280 irq 19 |
| [ 2.219842] ata5: SATA max UDMA/133 abar m2048@0xf04cf000 port 0xf04cf300 irq 19 |
| [ 2.219844] ata6: SATA max UDMA/133 abar m2048@0xf04cf000 port 0xf04cf380 irq 19 |
| [ 2.220035] ohci-pci 0000:00:12.0: OHCI PCI host controller |
| [ 2.220040] ohci-pci 0000:00:12.0: new USB bus registered, assigned bus number 7 |
| [ 2.220080] ohci-pci 0000:00:12.0: irq 18, io mem 0xf04cc000 |
| [ 2.276171] usb usb7: New USB device found, idVendor=1d6b, idProduct=0001 |
| [ 2.276174] usb usb7: New USB device strings: Mfr=3, Product=2, SerialNumber=1 |
| [ 2.276175] usb usb7: Product: OHCI PCI host controller |
| [ 2.276177] usb usb7: Manufacturer: Linux 4.15.9-1-ARCH ohci_hcd |
| [ 2.276178] usb usb7: SerialNumber: 0000:00:12.0 |
| [ 2.276395] hub 7-0:1.0: USB hub found |
| [ 2.276404] hub 7-0:1.0: 5 ports detected |
| [ 2.276725] ohci-pci 0000:00:13.0: OHCI PCI host controller |
| [ 2.276739] ohci-pci 0000:00:13.0: new USB bus registered, assigned bus number 8 |
| [ 2.276766] ohci-pci 0000:00:13.0: irq 18, io mem 0xf04cd000 |
| [ 2.332171] usb usb8: New USB device found, idVendor=1d6b, idProduct=0001 |
| [ 2.332174] usb usb8: New USB device strings: Mfr=3, Product=2, SerialNumber=1 |
| [ 2.332175] usb usb8: Product: OHCI PCI host controller |
| [ 2.332176] usb usb8: Manufacturer: Linux 4.15.9-1-ARCH ohci_hcd |
| [ 2.332178] usb usb8: SerialNumber: 0000:00:13.0 |
| [ 2.332353] hub 8-0:1.0: USB hub found |
| [ 2.332362] hub 8-0:1.0: 5 ports detected |
| [ 2.332665] ohci-pci 0000:00:14.5: OHCI PCI host controller |
| [ 2.332670] ohci-pci 0000:00:14.5: new USB bus registered, assigned bus number 9 |
| [ 2.332697] ohci-pci 0000:00:14.5: irq 18, io mem 0xf04ce000 |
| [ 2.388166] usb usb9: New USB device found, idVendor=1d6b, idProduct=0001 |
| [ 2.388169] usb usb9: New USB device strings: Mfr=3, Product=2, SerialNumber=1 |
| [ 2.388170] usb usb9: Product: OHCI PCI host controller |
| [ 2.388172] usb usb9: Manufacturer: Linux 4.15.9-1-ARCH ohci_hcd |
| [ 2.388173] usb usb9: SerialNumber: 0000:00:14.5 |
| [ 2.388353] hub 9-0:1.0: USB hub found |
| [ 2.388362] hub 9-0:1.0: 2 ports detected |
| [ 2.525860] ata2: SATA link down (SStatus 0 SControl 300) |
| [ 2.525894] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300) |
| [ 2.527043] ata1.00: ATA-8: Hitachi HUA722010CLA331, JP4OA3NH, max UDMA/133 |
| [ 2.527046] ata1.00: 1953525168 sectors, multi 0: LBA48 NCQ (depth 31/32), AA |
| [ 2.528201] ata1.00: configured for UDMA/133 |
| [ 2.528513] scsi 0:0:0:0: Direct-Access ATA Hitachi HUA72201 A3NH PQ: 0 ANSI: 5 |
| [ 2.529021] usb 2-4: new high-speed USB device number 2 using ehci-pci |
| [ 2.533715] ata5: SATA link down (SStatus 0 SControl 300) |
| [ 2.533741] ata4: SATA link down (SStatus 0 SControl 300) |
| [ 2.533781] ata6: SATA link down (SStatus 0 SControl 300) |
| [ 2.533816] ata3: SATA link down (SStatus 0 SControl 300) |
| [ 2.537407] sd 0:0:0:0: [sda] 1953525168 512-byte logical blocks: (1.00 TB/932 GiB) |
| [ 2.537427] sd 0:0:0:0: [sda] Write Protect is off |
| [ 2.537429] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 |
| [ 2.537471] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA |
| [ 2.576198] sda: sda1 sda2 sda3 |
| [ 2.576819] sd 0:0:0:0: [sda] Attached SCSI disk |
| [ 2.657490] usb 2-4: New USB device found, idVendor=0a05, idProduct=7220 |
| [ 2.657493] usb 2-4: New USB device strings: Mfr=0, Product=0, SerialNumber=0 |
| [ 2.657762] hub 2-4:1.0: USB hub found |
| [ 2.657860] hub 2-4:1.0: 4 ports detected |
| [ 2.928077] usb 2-4.3: new low-speed USB device number 3 using ehci-pci |
| [ 3.015159] usb 2-4.3: New USB device found, idVendor=413c, idProduct=2003 |
| [ 3.015163] usb 2-4.3: New USB device strings: Mfr=1, Product=2, SerialNumber=0 |
| [ 3.015165] usb 2-4.3: Product: Dell USB Keyboard |
| [ 3.015166] usb 2-4.3: Manufacturer: Dell |
| [ 3.018007] hidraw: raw HID events driver (C) Jiri Kosina |
| [ 3.023291] usbcore: registered new interface driver usbhid |
| [ 3.023293] usbhid: USB HID core driver |
| [ 3.024838] input: Dell Dell USB Keyboard as /devices/pci0000:00/0000:00:13.2/usb2/2-4/2-4.3/2-4.3:1.0/0003:413C:2003.0001/input/input2 |
| [ 3.039085] tsc: Refined TSC clocksource calibration: 3499.973 MHz |
| [ 3.039094] clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x327337fff97, max_idle_ns: 440795382706 ns |
| [ 3.076306] hid-generic 0003:413C:2003.0001: input,hidraw0: USB HID v1.10 Keyboard [Dell Dell USB Keyboard] on usb-0000:00:13.2-4.3/input0 |
| [ 3.226852] EXT4-fs (sda1): mounted filesystem with ordered data mode. Opts: (null) |
| [ 3.502113] random: crng init done |
| [ 4.047258] clocksource: Switched to clocksource tsc |
| [ 4.440937] ip_tables: (C) 2000-2006 Netfilter Core Team |
| [ 4.523782] systemd[1]: systemd 238 running in system mode. (+PAM -AUDIT -SELINUX -IMA -APPARMOR +SMACK -SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ +LZ4 +SECCOMP +BLKID +ELFUTILS +KMOD -IDN2 +IDN +PCRE2 default-hierarchy=hybrid) |
| [ 4.535220] systemd[1]: Detected architecture x86-64. |
| [ 4.559564] systemd[1]: Set hostname to <werkpc>. |
| [ 5.801486] systemd[1]: Listening on Journal Socket (/dev/log). |
| [ 5.809367] systemd[1]: Created slice system-getty.slice. |
| [ 5.861644] systemd[1]: Reached target Remote File Systems. |
| [ 5.868332] systemd[1]: Listening on Journal Socket. |
| [ 5.875237] systemd[1]: Listening on udev Kernel Socket. |
| [ 5.920770] systemd[1]: Starting Load Kernel Modules... |
| [ 6.025618] sd 0:0:0:0: Attached scsi generic sg0 type 0 |
| [ 6.040904] systemd[1]: Listening on Process Core Dump Socket. |
| [ 6.085266] f71882fg: Found f71868a chip at 0x220, revision 48 |
| [ 6.085365] f71882fg f71882fg.544: Fan: 1 is in duty-cycle mode |
| [ 6.085383] f71882fg f71882fg.544: Fan: 2 is in duty-cycle mode |
| [ 6.085394] f71882fg f71882fg.544: Fan: 3 is in duty-cycle mode |
| [ 6.085403] f71882fg f71882fg.544: hwmon_device_register() is deprecated. Please convert the driver to use hwmon_device_register_with_info(). |
| [ 6.089897] i2c /dev entries driver |
| [ 6.425122] EXT4-fs (sda1): re-mounted. Opts: data=ordered |
| [ 6.456749] Linux agpgart interface v0.103 |
| [ 6.571979] systemd-journald[227]: Received request to flush runtime journal from PID 1 |
| [ 6.767154] usbcore: registered new interface driver udl |
| [ 9.470055] acpi_cpufreq: overriding BIOS provided _PSD data |
| [ 9.683195] piix4_smbus 0000:00:14.0: SMBus Host Controller at 0xb00, revision 0 |
| [ 9.683199] piix4_smbus 0000:00:14.0: Using register 0x2e for SMBus port selection |
| [ 9.683585] piix4_smbus 0000:00:14.0: Auxiliary SMBus Host Controller at 0xb20 |
| [ 9.781656] rtc_cmos 00:01: RTC can wake from S4 |
| [ 9.781838] rtc_cmos 00:01: rtc core: registered rtc_cmos as rtc0 |
| [ 9.781878] rtc_cmos 00:01: alarms up to one day, 114 bytes nvram, hpet irqs |
| [ 9.829937] sp5100_tco: SP5100/SB800 TCO WatchDog Timer Driver v0.05 |
| [ 9.830029] sp5100_tco: PCI Vendor ID: 0x1022, Device ID: 0x780b, Revision ID: 0x14 |
| [ 9.830033] sp5100_tco: I/O address 0x0cd6 already in use |
| [ 9.849182] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4 |
| [ 10.122712] [drm] radeon kernel modesetting enabled. |
| [ 10.122756] checking generic (e0000000 6f0000) vs hw (e0000000 10000000) |
| [ 10.122757] fb: switching to radeondrmfb from VESA VGA |
| [ 10.122783] Console: switching to colour dummy device 80x25 |
| [ 10.123256] [drm] initializing kernel modesetting (ARUBA 0x1002:0x990E 0x1002:0x990E 0x00). |
| [ 10.123294] ATOM BIOS: 113 |
| [ 10.123350] radeon 0000:00:01.0: VRAM: 512M 0x0000000000000000 - 0x000000001FFFFFFF (512M used) |
| [ 10.123352] radeon 0000:00:01.0: GTT: 1024M 0x0000000020000000 - 0x000000005FFFFFFF |
| [ 10.123355] [drm] Detected VRAM RAM=512M, BAR=256M |
| [ 10.123356] [drm] RAM width 64bits DDR |
| [ 10.123425] [TTM] Zone kernel: Available graphics memory: 2819154 kiB |
| [ 10.123426] [TTM] Zone dma32: Available graphics memory: 2097152 kiB |
| [ 10.123427] [TTM] Initializing pool allocator |
| [ 10.123431] [TTM] Initializing DMA pool allocator |
| [ 10.123454] [drm] radeon: 512M of VRAM memory ready |
| [ 10.123455] [drm] radeon: 1024M of GTT memory ready. |
| [ 10.123463] [drm] Loading ARUBA Microcode |
| [ 10.329727] input: PC Speaker as /devices/platform/pcspkr/input/input3 |
| [ 10.480810] r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded |
| [ 10.481393] r8169 0000:01:00.0 eth0: RTL8168evl/8111evl at 0x00000000f0e4816b, d4:3d:7e:e0:0d:db, XID 0c900800 IRQ 37 |
| [ 10.481396] r8169 0000:01:00.0 eth0: jumbo features [frames: 9200 bytes, tx checksumming: ko] |
| [ 10.481429] r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded |
| [ 10.481752] r8169 0000:02:00.0 eth1: RTL8168e/8111e at 0x000000006545f06b, 10:fe:ed:02:1b:eb, XID 0c200000 IRQ 38 |
| [ 10.481755] r8169 0000:02:00.0 eth1: jumbo features [frames: 9200 bytes, tx checksumming: ko] |
| [ 10.539134] [drm] Internal thermal controller without fan control |
| [ 10.539334] [drm] radeon: dpm initialized |
| [ 10.558182] [drm] Found VCE firmware/feedback version 50.0.1 / 17! |
| [ 10.558224] [drm] GART: num cpu pages 262144, num gpu pages 262144 |
| [ 10.592846] [drm] PCIE GART of 1024M enabled (table at 0x00000000001D6000). |
| [ 10.592975] radeon 0000:00:01.0: WB enabled |
| [ 10.592978] radeon 0000:00:01.0: fence driver on ring 0 use gpu addr 0x0000000020000c00 and cpu addr 0x0000000004e93533 |
| [ 10.593375] radeon 0000:00:01.0: fence driver on ring 5 use gpu addr 0x0000000000075a18 and cpu addr 0x000000002111e854 |
| [ 10.603830] media: Linux media interface: v0.10 |
| [ 10.613562] radeon 0000:00:01.0: fence driver on ring 6 use gpu addr 0x0000000020000c18 and cpu addr 0x00000000f11ff566 |
| [ 10.613564] radeon 0000:00:01.0: fence driver on ring 7 use gpu addr 0x0000000020000c1c and cpu addr 0x0000000047bdce95 |
| [ 10.613565] radeon 0000:00:01.0: fence driver on ring 1 use gpu addr 0x0000000020000c04 and cpu addr 0x000000008b913f6a |
| [ 10.613567] radeon 0000:00:01.0: fence driver on ring 2 use gpu addr 0x0000000020000c08 and cpu addr 0x000000002ffcaf2c |
| [ 10.613568] radeon 0000:00:01.0: fence driver on ring 3 use gpu addr 0x0000000020000c0c and cpu addr 0x00000000bcc6ed89 |
| [ 10.613570] radeon 0000:00:01.0: fence driver on ring 4 use gpu addr 0x0000000020000c10 and cpu addr 0x0000000006ab62a2 |
| [ 10.613572] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013). |
| [ 10.613572] [drm] Driver supports precise vblank timestamp query. |
| [ 10.613573] radeon 0000:00:01.0: radeon: MSI limited to 32-bit |
| [ 10.613615] radeon 0000:00:01.0: radeon: using MSI. |
| [ 10.613636] [drm] radeon: irq initialized. |
| [ 10.632117] [drm] ring test on 0 succeeded in 2 usecs |
| [ 10.632124] [drm] ring test on 3 succeeded in 3 usecs |
| [ 10.632130] [drm] ring test on 4 succeeded in 3 usecs |
| [ 10.643092] r8169 0000:01:00.0 enp1s0: renamed from eth0 |
| [ 10.650371] Linux video capture interface: v2.00 |
| [ 10.678196] [drm] ring test on 5 succeeded in 2 usecs |
| [ 10.686301] r8169 0000:02:00.0 enp2s0: renamed from eth1 |
| [ 10.698220] [drm] UVD initialized successfully. |
| [ 10.730773] saa7134: saa7130/34: v4l2 driver version 0, 2, 17 loaded |
| [ 10.730910] saa7134: saa7134[0]: found at 0000:03:05.0, rev: 1, irq: 20, latency: 64, mmio: 0xf0300000 |
| [ 10.730917] saa7134: saa7134[0]: subsystem: 11bd:002b, board: Pinnacle PCTV Stereo (saa7134) [card=26,autodetected] |
| [ 10.730936] saa7134: saa7134[0]: board init: gpio is 0 |
| [ 10.808318] [drm] ring test on 6 succeeded in 18 usecs |
| [ 10.808330] [drm] ring test on 7 succeeded in 4 usecs |
| [ 10.808331] [drm] VCE initialized successfully. |
| [ 10.808564] [drm] ib test on ring 0 succeeded in 0 usecs |
| [ 10.808606] [drm] ib test on ring 3 succeeded in 0 usecs |
| [ 10.808653] [drm] ib test on ring 4 succeeded in 0 usecs |
| [ 10.880039] saa7134: i2c eeprom 00: bd 11 2b 00 f8 f8 1c 00 43 43 a9 1c 55 d2 b2 92 |
| [ 10.880043] saa7134: i2c eeprom 10: 00 00 19 0e ff 20 ff ff ff ff ff ff ff ff ff ff |
| [ 10.880044] saa7134: i2c eeprom 20: 01 40 01 03 03 ff 03 01 08 ff 00 53 ff ff ff ff |
| [ 10.880045] saa7134: i2c eeprom 30: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff |
| [ 10.880046] saa7134: i2c eeprom 40: ff 07 00 c0 86 ff 01 01 ff ff ff ff ff ff ff ff |
| [ 10.880047] saa7134: i2c eeprom 50: 0c 22 17 09 02 14 bd 8e ff ff ff ff ff ff ff ff |
| [ 10.880049] saa7134: i2c eeprom 60: 03 03 19 71 fb ff ff ff ff ff ff ff ff ff ff ff |
| [ 10.880050] saa7134: i2c eeprom 70: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff |
| [ 10.880051] saa7134: i2c eeprom 80: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff |
| [ 10.880052] saa7134: i2c eeprom 90: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff |
| [ 10.880053] saa7134: i2c eeprom a0: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff |
| [ 10.880054] saa7134: i2c eeprom b0: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff |
| [ 10.880055] saa7134: i2c eeprom c0: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff |
| [ 10.880056] saa7134: i2c eeprom d0: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff |
| [ 10.880057] saa7134: i2c eeprom e0: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff |
| [ 10.880058] saa7134: i2c eeprom f0: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff |
| [ 11.171171] Adding 6828756k swap on /dev/sda3. Priority:-2 extents:1 across:6828756k FS |
| [ 11.308939] tda9887 5-0043: creating new instance |
| [ 11.308944] tda9887 5-0043: tda988[5/6/7] found |
| [ 11.312081] tuner: 5-0043: Tuner 74 found with type(s) Radio TV. |
| [ 11.319125] [drm] ib test on ring 5 succeeded |
| [ 11.372997] tea5767: Chip ID is not zero. It is not a TEA5767 |
| [ 11.373007] tuner: 5-0060: Tuner -1 found with type(s) Radio TV. |
| [ 11.420910] AVX version of gcm_enc/dec engaged. |
| [ 11.420911] AES CTR mode by8 optimization enabled |
| [ 11.431084] mt20xx 5-0060: microtune: companycode=3cbf part=42 rev=2f |
| [ 11.443003] mt20xx 5-0060: microtune MT2050 found, OK |
| [ 11.480135] saa7134: saa7134[0]: registered device video0 [v4l2] |
| [ 11.480216] saa7134: saa7134[0]: registered device vbi0 |
| [ 11.637124] saa7134_alsa: saa7134 ALSA driver for DMA sound loaded |
| [ 11.637170] saa7134_alsa: saa7134[0]/alsa: saa7134[0] at 0xf0300000 irq 20 registered as card -1 |
| [ 11.847042] [drm] ib test on ring 6 succeeded |
| [ 11.864216] EXT4-fs (sda2): mounted filesystem with ordered data mode. Opts: data=ordered |
| [ 11.884066] kvm: Nested Virtualization enabled |
| [ 11.884071] kvm: Nested Paging enabled |
| [ 11.931274] MCE: In-kernel MCE decoding enabled. |
| [ 12.031059] EDAC amd64: Node 0: DRAM ECC disabled. |
| [ 12.031063] EDAC amd64: ECC disabled in the BIOS or no ECC capability, module will not load. |
| Either enable ECC checking or force module loading by setting 'ecc_enable_override'. |
| (Note that use of the override may cause unknown side effects.) |
| [ 12.051838] EDAC amd64: Node 0: DRAM ECC disabled. |
| [ 12.051841] EDAC amd64: ECC disabled in the BIOS or no ECC capability, module will not load. |
| Either enable ECC checking or force module loading by setting 'ecc_enable_override'. |
| (Note that use of the override may cause unknown side effects.) |
| [ 12.071736] EDAC amd64: Node 0: DRAM ECC disabled. |
| [ 12.071739] EDAC amd64: ECC disabled in the BIOS or no ECC capability, module will not load. |
| Either enable ECC checking or force module loading by setting 'ecc_enable_override'. |
| (Note that use of the override may cause unknown side effects.) |
| [ 12.092529] EDAC amd64: Node 0: DRAM ECC disabled. |
| [ 12.092532] EDAC amd64: ECC disabled in the BIOS or no ECC capability, module will not load. |
| Either enable ECC checking or force module loading by setting 'ecc_enable_override'. |
| (Note that use of the override may cause unknown side effects.) |
| [ 12.351054] [drm] ib test on ring 7 succeeded |
| [ 12.352679] [drm] Radeon Display Connectors |
| [ 12.352683] [drm] Connector 0: |
| [ 12.352684] [drm] HDMI-A-1 |
| [ 12.352685] [drm] HPD1 |
| [ 12.352689] [drm] DDC: 0x6530 0x6530 0x6534 0x6534 0x6538 0x6538 0x653c 0x653c |
| [ 12.352690] [drm] Encoders: |
| [ 12.352691] [drm] DFP1: INTERNAL_UNIPHY2 |
| [ 12.352692] [drm] Connector 1: |
| [ 12.352694] [drm] VGA-1 |
| [ 12.352695] [drm] HPD2 |
| [ 12.352698] [drm] DDC: 0x6540 0x6540 0x6544 0x6544 0x6548 0x6548 0x654c 0x654c |
| [ 12.352698] [drm] Encoders: |
| [ 12.352700] [drm] CRT1: INTERNAL_UNIPHY2 |
| [ 12.352701] [drm] CRT1: NUTMEG |
| [ 12.352702] [drm] Connector 2: |
| [ 12.352703] [drm] DVI-D-1 |
| [ 12.352705] [drm] HPD3 |
| [ 12.352708] [drm] DDC: 0x6550 0x6550 0x6554 0x6554 0x6558 0x6558 0x655c 0x655c |
| [ 12.352709] [drm] Encoders: |
| [ 12.352711] [drm] DFP2: INTERNAL_UNIPHY |
| [ 12.496798] [drm] fb mappable at 0xE03DA000 |
| [ 12.496801] [drm] vram apper at 0xE0000000 |
| [ 12.496802] [drm] size 7299072 |
| [ 12.496804] [drm] fb depth is 24 |
| [ 12.496805] [drm] pitch is 6912 |
| [ 12.496912] fbcon: radeondrmfb (fb0) is primary device |
| [ 12.580698] Console: switching to colour frame buffer device 210x65 |
| [ 12.587628] radeon 0000:00:01.0: fb0: radeondrmfb frame buffer device |
| [ 12.594090] [drm] Initialized radeon 2.50.0 20080528 for 0000:00:01.0 on minor 0 |
| [ 12.594569] snd_hda_intel 0000:00:01.1: Force to non-snoop mode |
| [ 12.642871] input: HDA ATI HDMI HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:01.1/sound/card1/input4 |
| [ 12.643033] input: HDA ATI HDMI HDMI/DP,pcm=7 as /devices/pci0000:00/0000:00:01.1/sound/card1/input5 |
| [ 12.867600] snd_hda_codec_realtek hdaudioC2D3: autoconfig for ALC887-VD: line_outs=4 (0x14/0x15/0x16/0x17/0x0) type:line |
| [ 12.867605] snd_hda_codec_realtek hdaudioC2D3: speaker_outs=0 (0x0/0x0/0x0/0x0/0x0) |
| [ 12.867609] snd_hda_codec_realtek hdaudioC2D3: hp_outs=1 (0x1b/0x0/0x0/0x0/0x0) |
| [ 12.867611] snd_hda_codec_realtek hdaudioC2D3: mono: mono_out=0x0 |
| [ 12.867613] snd_hda_codec_realtek hdaudioC2D3: inputs: |
| [ 12.867616] snd_hda_codec_realtek hdaudioC2D3: Mic=0x19 |
| [ 12.867619] snd_hda_codec_realtek hdaudioC2D3: Line=0x1a |
| [ 12.886132] input: HDA Digital PCBeep as /devices/pci0000:00/0000:00:14.2/sound/card2/input6 |
| [ 12.887166] input: HD-Audio Generic Mic as /devices/pci0000:00/0000:00:14.2/sound/card2/input7 |
| [ 12.887296] input: HD-Audio Generic Line as /devices/pci0000:00/0000:00:14.2/sound/card2/input8 |
| [ 12.887507] input: HD-Audio Generic Line Out Front as /devices/pci0000:00/0000:00:14.2/sound/card2/input9 |
| [ 12.887807] input: HD-Audio Generic Line Out Surround as /devices/pci0000:00/0000:00:14.2/sound/card2/input10 |
| [ 12.888073] input: HD-Audio Generic Line Out CLFE as /devices/pci0000:00/0000:00:14.2/sound/card2/input11 |
| [ 12.888277] input: HD-Audio Generic Line Out Side as /devices/pci0000:00/0000:00:14.2/sound/card2/input12 |
| [ 12.888567] input: HD-Audio Generic Front Headphone as /devices/pci0000:00/0000:00:14.2/sound/card2/input13 |
| [ 16.468243] IPv6: ADDRCONF(NETDEV_UP): enp1s0: link is not ready |
| [ 16.628052] r8169 0000:01:00.0 enp1s0: link down |
| [ 16.628056] r8169 0000:01:00.0 enp1s0: link down |
| [ 16.628141] IPv6: ADDRCONF(NETDEV_UP): enp1s0: link is not ready |
| [ 16.635208] IPv6: ADDRCONF(NETDEV_UP): enp2s0: link is not ready |
| [ 16.777658] r8169 0000:02:00.0 enp2s0: link down |
| [ 16.777729] IPv6: ADDRCONF(NETDEV_UP): enp2s0: link is not ready |
| [ 19.903789] r8169 0000:01:00.0 enp1s0: link up |
| [ 19.903801] IPv6: ADDRCONF(NETDEV_CHANGE): enp1s0: link becomes ready |