| [ 0.000000] Initializing cgroup subsys cpuset |
| [ 0.000000] Initializing cgroup subsys cpu |
| [ 0.000000] Initializing cgroup subsys cpuacct |
| [ 0.000000] Linux version 3.16.0-4-amd64 (debian-kernel@lists.debian.org) (gcc version 4.8.4 (Debian 4.8.4-1) ) #1 SMP Debian 3.16.7-ckt7-1 (2015-03-01) |
| [ 0.000000] e820: BIOS-provided physical RAM map: |
| [ 0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009fbff] usable |
| [ 0.000000] BIOS-e820: [mem 0x000000000009fc00-0x000000000009ffff] reserved |
| [ 0.000000] BIOS-e820: [mem 0x00000000000f0000-0x00000000000fffff] reserved |
| [ 0.000000] BIOS-e820: [mem 0x0000000000100000-0x00000000dffa8fff] usable |
| [ 0.000000] BIOS-e820: [mem 0x00000000dffa9000-0x00000000efffffff] reserved |
| [ 0.000000] BIOS-e820: [mem 0x0000000100000000-0x000000015fffffff] usable |
| [ 0.000000] NX (Execute Disable) protection: active |
| [ 0.000000] SMBIOS 2.7 present. |
| [ 0.000000] DMI: ASUS KFSN4-DRE/KFSN4-DRE, BIOS 4.0-9324-g4038a7f-dirty 04/20/2015 |
| [ 0.000000] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved |
| [ 0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable |
| [ 0.000000] AGP: No AGP bridge found |
| [ 0.000000] e820: last_pfn = 0x160000 max_arch_pfn = 0x400000000 |
| [ 0.000000] MTRR default type: uncachable |
| [ 0.000000] MTRR fixed ranges enabled: |
| [ 0.000000] 00000-9FFFF write-back |
| [ 0.000000] A0000-BFFFF uncachable |
| [ 0.000000] C0000-FFFFF write-back |
| [ 0.000000] MTRR variable ranges enabled: |
| [ 0.000000] 0 base 000000000000 mask FFFF80000000 write-back |
| [ 0.000000] 1 base 000080000000 mask FFFFC0000000 write-back |
| [ 0.000000] 2 base 0000C0000000 mask FFFFE0000000 write-back |
| [ 0.000000] 3 base 0000F8000000 mask FFFFFC000000 write-combining |
| [ 0.000000] 4 disabled |
| [ 0.000000] 5 disabled |
| [ 0.000000] 6 disabled |
| [ 0.000000] 7 disabled |
| [ 0.000000] TOM2: 0000000160000000 aka 5632M |
| [ 0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106 |
| [ 0.000000] e820: last_pfn = 0xdffa9 max_arch_pfn = 0x400000000 |
| [ 0.000000] found SMP MP-table at [mem 0x000f1cf0-0x000f1cff] mapped at [ffff8800000f1cf0] |
| [ 0.000000] Base memory trampoline at [ffff880000099000] 99000 size 24576 |
| [ 0.000000] Using GB pages for direct mapping |
| [ 0.000000] init_memory_mapping: [mem 0x00000000-0x000fffff] |
| [ 0.000000] [mem 0x00000000-0x000fffff] page 4k |
| [ 0.000000] BRK [0x01af3000, 0x01af3fff] PGTABLE |
| [ 0.000000] BRK [0x01af4000, 0x01af4fff] PGTABLE |
| [ 0.000000] BRK [0x01af5000, 0x01af5fff] PGTABLE |
| [ 0.000000] init_memory_mapping: [mem 0x15fe00000-0x15fffffff] |
| [ 0.000000] [mem 0x15fe00000-0x15fffffff] page 2M |
| [ 0.000000] BRK [0x01af6000, 0x01af6fff] PGTABLE |
| [ 0.000000] init_memory_mapping: [mem 0x15c000000-0x15fdfffff] |
| [ 0.000000] [mem 0x15c000000-0x15fdfffff] page 2M |
| [ 0.000000] init_memory_mapping: [mem 0x100000000-0x15bffffff] |
| [ 0.000000] [mem 0x100000000-0x13fffffff] page 1G |
| [ 0.000000] [mem 0x140000000-0x15bffffff] page 2M |
| [ 0.000000] init_memory_mapping: [mem 0x00100000-0xdffa8fff] |
| [ 0.000000] [mem 0x00100000-0x001fffff] page 4k |
| [ 0.000000] [mem 0x00200000-0x3fffffff] page 2M |
| [ 0.000000] [mem 0x40000000-0xbfffffff] page 1G |
| [ 0.000000] [mem 0xc0000000-0xdfdfffff] page 2M |
| [ 0.000000] [mem 0xdfe00000-0xdffa8fff] page 4k |
| [ 0.000000] RAMDISK: [mem 0x7f775000-0x7fffefff] |
| [ 0.000000] ACPI: Early table checksum verification disabled |
| [ 0.000000] ACPI: RSDP 0x00000000000F1EC0 000024 (v02 CORE ) |
| [ 0.000000] ACPI: XSDT 0x00000000DFFB20E0 000064 (v01 CORE COREBOOT 00000000 CORE 00000000) |
| [ 0.000000] ACPI: FACP 0x00000000DFFB48A0 000074 (v01 CORE COREBOOT 00000000 CORE 00000000) |
| [ 0.000000] ACPI: DSDT 0x00000000DFFB2250 002644 (v02 ASUS COREBOOT 00000001 INTL 20150204) |
| [ 0.000000] ACPI: FACS 0x00000000DFFB2210 000040 |
| [ 0.000000] ACPI: SSDT 0x00000000DFFB49A0 000D57 (v02 CORE COREBOOT 0000002A CORE 0000002A) |
| [ 0.000000] ACPI: APIC 0x00000000DFFB5700 0000C6 (v01 CORE COREBOOT 00000000 CORE 00000000) |
| [ 0.000000] ACPI: SRAT 0x00000000DFFB57D0 000178 (v01 CORE COREBOOT 00000000 CORE 00000000) |
| [ 0.000000] ACPI: SLIT 0x00000000DFFB5948 000030 (v01 CORE COREBOOT 00000000 CORE 00000000) |
| [ 0.000000] ACPI: HPET 0x00000000DFFB5980 000038 (v01 CORE COREBOOT 00000000 CORE 00000000) |
| [ 0.000000] ACPI: SRAT 0x00000000DFFB59C0 000178 (v01 CORE COREBOOT 00000000 CORE 00000000) |
| [ 0.000000] ACPI: SLIT 0x00000000DFFB5B38 000030 (v01 CORE COREBOOT 00000000 CORE 00000000) |
| [ 0.000000] ACPI: Local APIC address 0xfee00000 |
| [ 0.000000] SRAT: PXM 0 -> APIC 0x00 -> Node 0 |
| [ 0.000000] SRAT: PXM 0 -> APIC 0x01 -> Node 0 |
| [ 0.000000] SRAT: PXM 0 -> APIC 0x02 -> Node 0 |
| [ 0.000000] SRAT: PXM 0 -> APIC 0x03 -> Node 0 |
| [ 0.000000] SRAT: PXM 1 -> APIC 0x04 -> Node 1 |
| [ 0.000000] SRAT: PXM 1 -> APIC 0x05 -> Node 1 |
| [ 0.000000] SRAT: PXM 1 -> APIC 0x06 -> Node 1 |
| [ 0.000000] SRAT: PXM 1 -> APIC 0x07 -> Node 1 |
| [ 0.000000] SRAT: Node 0 PXM 0 [mem 0x00000000-0x0009ffff] |
| [ 0.000000] SRAT: Node 2 PXM 7 [mem 0x00100000-0xdfffffff] |
| [ 0.000000] SRAT: Node 0 PXM 0 [mem 0x00100000-0xdfffffff] |
| [ 0.000000] SRAT: Node 0 PXM 0 [mem 0x100000000-0x11fffffff] |
| [ 0.000000] SRAT: Node 1 PXM 1 [mem 0x120000000-0x15fffffff] |
| [ 0.000000] NUMA: Initialized distance table, cnt=3 |
| [ 0.000000] NUMA: node 2 [mem 0x00100000-0xdfffffff] overlaps with node 0 [mem 0x00100000-0xdfffffff] |
| [ 0.000000] Scanning NUMA topology in Northbridge 24 |
| [ 0.000000] Number of physical nodes 2 |
| [ 0.000000] Node 0 MemBase 0000000000000000 Limit 0000000120000000 |
| [ 0.000000] Node 1 MemBase 0000000120000000 Limit 0000000160000000 |
| [ 0.000000] Initmem setup node 0 [mem 0x00000000-0x11fffffff] |
| [ 0.000000] NODE_DATA [mem 0x11fffb000-0x11fffffff] |
| [ 0.000000] Initmem setup node 1 [mem 0x120000000-0x15fffffff] |
| [ 0.000000] NODE_DATA [mem 0x15fff9000-0x15fffdfff] |
| [ 0.000000] [ffffea0003f00000-ffffea0003ffffff] potential offnode page_structs |
| [ 0.000000] [ffffea0000000000-ffffea0003ffffff] PMD -> [ffff88011be00000-ffff88011f7fffff] on node 0 |
| [ 0.000000] [ffffea0004000000-ffffea0004dfffff] PMD -> [ffff88015e600000-ffff88015f3fffff] on node 1 |
| [ 0.000000] Zone ranges: |
| [ 0.000000] DMA [mem 0x00001000-0x00ffffff] |
| [ 0.000000] DMA32 [mem 0x01000000-0xffffffff] |
| [ 0.000000] Normal [mem 0x100000000-0x15fffffff] |
| [ 0.000000] Movable zone start for each node |
| [ 0.000000] Early memory node ranges |
| [ 0.000000] node 0: [mem 0x00001000-0x0009efff] |
| [ 0.000000] node 0: [mem 0x00100000-0xdffa8fff] |
| [ 0.000000] node 0: [mem 0x100000000-0x11fffffff] |
| [ 0.000000] node 1: [mem 0x120000000-0x15fffffff] |
| [ 0.000000] On node 0 totalpages: 1048391 |
| [ 0.000000] DMA zone: 56 pages used for memmap |
| [ 0.000000] DMA zone: 21 pages reserved |
| [ 0.000000] DMA zone: 3998 pages, LIFO batch:0 |
| [ 0.000000] DMA32 zone: 12487 pages used for memmap |
| [ 0.000000] DMA32 zone: 913321 pages, LIFO batch:31 |
| [ 0.000000] Normal zone: 1792 pages used for memmap |
| [ 0.000000] Normal zone: 131072 pages, LIFO batch:31 |
| [ 0.000000] On node 1 totalpages: 262144 |
| [ 0.000000] Normal zone: 3584 pages used for memmap |
| [ 0.000000] Normal zone: 262144 pages, LIFO batch:31 |
| [ 0.000000] ACPI: PM-Timer IO Port: 0x2008 |
| [ 0.000000] ACPI: Local APIC address 0xfee00000 |
| [ 0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled) |
| [ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled) |
| [ 0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x02] enabled) |
| [ 0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x03] enabled) |
| [ 0.000000] ACPI: LAPIC (acpi_id[0x04] lapic_id[0x04] enabled) |
| [ 0.000000] ACPI: LAPIC (acpi_id[0x05] lapic_id[0x05] enabled) |
| [ 0.000000] ACPI: LAPIC (acpi_id[0x06] lapic_id[0x06] enabled) |
| [ 0.000000] ACPI: LAPIC (acpi_id[0x07] lapic_id[0x07] enabled) |
| [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1]) |
| [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1]) |
| [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x02] high edge lint[0x1]) |
| [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x03] high edge lint[0x1]) |
| [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x04] high edge lint[0x1]) |
| [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x05] high edge lint[0x1]) |
| [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x06] high edge lint[0x1]) |
| [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x07] high edge lint[0x1]) |
| [ 0.000000] ACPI: IOAPIC (id[0x18] address[0xfec00000] gsi_base[0]) |
| [ 0.000000] IOAPIC[0]: apic_id 24, version 17, address 0xfec00000, GSI 0-23 |
| [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level) |
| [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 14 global_irq 14 high edge) |
| [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 15 global_irq 15 high edge) |
| [ 0.000000] ACPI: IRQ9 used by override. |
| [ 0.000000] ACPI: IRQ14 used by override. |
| [ 0.000000] ACPI: IRQ15 used by override. |
| [ 0.000000] Using ACPI (MADT) for SMP configuration information |
| [ 0.000000] ACPI: HPET id: 0x10de8201 base: 0xfed00000 |
| [ 0.000000] smpboot: Allowing 8 CPUs, 0 hotplug CPUs |
| [ 0.000000] nr_irqs_gsi: 40 |
| [ 0.000000] PM: Registered nosave memory: [mem 0x0009f000-0x0009ffff] |
| [ 0.000000] PM: Registered nosave memory: [mem 0x000a0000-0x000effff] |
| [ 0.000000] PM: Registered nosave memory: [mem 0x000f0000-0x000fffff] |
| [ 0.000000] PM: Registered nosave memory: [mem 0xdffa9000-0xefffffff] |
| [ 0.000000] PM: Registered nosave memory: [mem 0xf0000000-0xffffffff] |
| [ 0.000000] e820: [mem 0xf0000000-0xffffffff] available for PCI devices |
| [ 0.000000] Booting paravirtualized kernel on bare hardware |
| [ 0.000000] setup_percpu: NR_CPUS:512 nr_cpumask_bits:512 nr_cpu_ids:8 nr_node_ids:2 |
| [ 0.000000] PERCPU: Embedded 27 pages/cpu @ffff88011fc00000 s80896 r8192 d21504 u524288 |
| [ 0.000000] pcpu-alloc: s80896 r8192 d21504 u524288 alloc=1*2097152 |
| [ 0.000000] pcpu-alloc: [0] 0 1 2 3 [1] 4 5 6 7 |
| [ 0.000000] Built 2 zonelists in Node order, mobility grouping on. Total pages: 1292595 |
| [ 0.000000] Policy zone: Normal |
| [ 0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes) |
| [ 0.000000] AGP: Checking aperture... |
| [ 0.000000] AGP: No AGP bridge found |
| [ 0.000000] AGP: Node 0: aperture [bus addr 0xf5fa000000-0xf5fbffffff] (32MB) |
| [ 0.000000] Aperture beyond 4GB. Ignoring. |
| [ 0.000000] AGP: Your BIOS doesn't leave a aperture memory hole |
| [ 0.000000] AGP: Please enable the IOMMU option in the BIOS setup |
| [ 0.000000] AGP: This costs you 64MB of RAM |
| [ 0.000000] AGP: Mapping aperture over RAM [mem 0xd4000000-0xd7ffffff] (65536KB) |
| [ 0.000000] PM: Registered nosave memory: [mem 0xd4000000-0xd7ffffff] |
| [ 0.000000] Memory: 5015500K/5242140K available (5203K kernel code, 943K rwdata, 1832K rodata, 1204K init, 840K bss, 226640K reserved) |
| [ 0.000000] Hierarchical RCU implementation. |
| [ 0.000000] RCU dyntick-idle grace-period acceleration is enabled. |
| [ 0.000000] RCU restricting CPUs from NR_CPUS=512 to nr_cpu_ids=8. |
| [ 0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=8 |
| [ 0.000000] NR_IRQS:33024 nr_irqs:744 16 |
| [ 0.000000] spurious 8259A interrupt: IRQ7. |
| [ 0.000000] Console: colour VGA+ 80x25 |
| [ 0.000000] console [tty0] enabled |
| [ 0.000000] console [ttyS0] enabled |
| [ 0.000000] mempolicy: Disabling automatic NUMA balancing. Configure with numa_balancing= or the kernel.numa_balancing sysctl |
| [ 0.000000] hpet clockevent registered |
| [ 0.000000] tsc: Fast TSC calibration using PIT |
| [ 0.000000] tsc: Detected 1909.852 MHz processor |
| [ 0.000160] Calibrating delay loop (skipped), value calculated using timer frequency.. 3819.70 BogoMIPS (lpj=7639408) |
| [ 0.010954] pid_max: default: 32768 minimum: 301 |
| [ 0.015677] ACPI: Core revision 20140424 |
| [ 0.022080] ACPI: All ACPI Tables successfully acquired |
| [ 0.027594] Security Framework initialized |
| [ 0.031771] AppArmor: AppArmor disabled by boot time parameter |
| [ 0.037681] Yama: disabled by default; enable with sysctl kernel.yama.* |
| [ 0.045500] Dentry cache hash table entries: 1048576 (order: 11, 8388608 bytes) |
| [ 0.058802] Inode-cache hash table entries: 524288 (order: 10, 4194304 bytes) |
| [ 0.068677] Mount-cache hash table entries: 16384 (order: 5, 131072 bytes) |
| [ 0.075714] Mountpoint-cache hash table entries: 16384 (order: 5, 131072 bytes) |
| [ 0.083677] Initializing cgroup subsys memory |
| [ 0.088138] Initializing cgroup subsys devices |
| [ 0.092684] Initializing cgroup subsys freezer |
| [ 0.097218] Initializing cgroup subsys net_cls |
| [ 0.101751] Initializing cgroup subsys blkio |
| [ 0.106118] Initializing cgroup subsys perf_event |
| [ 0.110913] Initializing cgroup subsys net_prio |
| [ 0.115579] tseg: 0000000000 |
| [ 0.115593] CPU: Physical Processor ID: 0 |
| [ 0.119725] CPU: Processor Core ID: 0 |
| [ 0.124505] mce: CPU supports 6 MCE banks |
| [ 0.128641] LVT offset 0 assigned for vector 0xf9 |
| [ 0.133445] Last level iTLB entries: 4KB 512, 2MB 16, 4MB 8 |
| Last level dTLB entries: 4KB 512, 2MB 128, 4MB 64, 1GB 0 |
| tlb_flushall_shift: 6 |
| [ 0.148922] Freeing SMP alternatives memory: 20K (ffffffff81a1a000 - ffffffff81a1f000) |
| [ 0.158062] ftrace: allocating 21601 entries in 85 pages |
| [ 0.173545] ..TIMER: vector=0x30 apic1=0 pin1=0 apic2=0 pin2=0 |
| [ 0.219189] smpboot: CPU0: Quad-Core AMD Opteron(tm) Processor 8347 (fam: 10, model: 02, stepping: 01) |
| [ 0.336304] Performance Events: AMD PMU driver. |
| [ 0.341027] ... version: 0 |
| [ 0.345125] ... bit width: 48 |
| [ 0.349295] ... generic registers: 4 |
| [ 0.353411] ... value mask: 0000ffffffffffff |
| [ 0.358813] ... max period: 00007fffffffffff |
| [ 0.364190] ... fixed-purpose events: 0 |
| [ 0.368294] ... event mask: 000000000000000f |
| [ 0.376324] NMI watchdog: enabled on all CPUs, permanently consumes one hw-PMU counter. |
| [ 0.384662] x86: Booting SMP configuration: |
| [ 0.388938] .... node #0, CPUs: #1 #2 #3 |
| [ 0.433511] .... node #1, CPUs: #4 #5 #6 #7 |
| [ 0.585082] x86: Booted up 2 nodes, 8 CPUs |
| [ 0.589509] smpboot: Total of 8 processors activated (30558.05 BogoMIPS) |
| [ 0.602164] devtmpfs: initialized |
| [ 0.614166] pinctrl core: initialized pinctrl subsystem |
| [ 0.619627] NET: Registered protocol family 16 |
| [ 0.624381] cpuidle: using governor ladder |
| [ 0.628558] cpuidle: using governor menu |
| [ 0.632563] node 0 link 1: io port [1000, 3fff] |
| [ 0.632567] TOM: 00000000e0000000 aka 3584M |
| [ 0.636829] Fam 10h mmconf [mem 0xe0000000-0xefffffff] |
| [ 0.636833] node 0 link 1: mmio [fc000000, fc3fffff] |
| [ 0.636836] node 0 link 1: mmio [f8000000, fbffffff] |
| [ 0.636839] TOM2: 0000000160000000 aka 5632M |
| [ 0.641186] bus: [bus 00-05] on node 0 link 1 |
| [ 0.641188] bus: 00 [io 0x0000-0xffff] |
| [ 0.641190] bus: 00 [mem 0xf0000000-0xffffffff] |
| [ 0.641192] bus: 00 [mem 0x160000000-0xfcffffffff] |
| [ 0.641298] ACPI: bus type PCI registered |
| [ 0.645382] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5 |
| [ 0.652055] PCI: Using configuration type 1 for base access |
| [ 0.657702] PCI: Using configuration type 1 for extended access |
| [ 0.664325] mtrr: your CPUs had inconsistent variable MTRR settings |
| [ 0.670696] mtrr: probably your BIOS does not setup all CPUs. |
| [ 0.676518] mtrr: corrected configuration. |
| [ 0.693194] ACPI: Added _OSI(Module Device) |
| [ 0.697496] ACPI: Added _OSI(Processor Device) |
| [ 0.702022] ACPI: Added _OSI(3.0 _SCP Extensions) |
| [ 0.706805] ACPI: Added _OSI(Processor Aggregator Device) |
| [ 0.715737] ACPI: Interpreter enabled |
| [ 0.719473] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S2_] (20140424/hwxface-580) |
| [ 0.728934] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S3_] (20140424/hwxface-580) |
| [ 0.738396] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S4_] (20140424/hwxface-580) |
| [ 0.747837] ACPI: (supports S0 S1 S5) |
| [ 0.751567] ACPI: Using IOAPIC for interrupt routing |
| [ 0.756653] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug |
| [ 0.785048] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-05]) |
| [ 0.791306] acpi PNP0A03:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI] |
| [ 0.799619] acpi PNP0A03:00: _OSC: OS now controls [PCIeHotplug PME AER PCIeCapability] |
| [ 0.836951] acpi PNP0A03:00: host bridge window expanded to [io 0x0000-0x0cf7]; [io 0x03b0-0x03df] ignored |
| [ 0.847068] PCI host bridge to bus 0000:00 |
| [ 0.851239] pci_bus 0000:00: root bus resource [bus 00-05] |
| [ 0.856796] pci_bus 0000:00: root bus resource [io 0x0d00-0x3fff] |
| [ 0.863054] pci_bus 0000:00: root bus resource [mem 0xf8000000-0xfbffffff] |
| [ 0.870003] pci_bus 0000:00: root bus resource [mem 0xfc000000-0xfc3fffff] |
| [ 0.876938] pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7] |
| [ 0.883208] pci 0000:00:00.0: [10de:005e] type 00 class 0x058000 |
| [ 0.883400] pci 0000:00:01.0: [10de:0051] type 00 class 0x060100 |
| [ 0.883407] pci 0000:00:01.0: reg 0x10: [io 0x2c00-0x2c7f] |
| [ 0.883519] pci 0000:00:01.1: [10de:0052] type 00 class 0x0c0500 |
| [ 0.883527] pci 0000:00:01.1: reg 0x10: [io 0x3000-0x301f] |
| [ 0.883552] pci 0000:00:01.1: reg 0x20: [io 0x2c80-0x2cbf] |
| [ 0.883560] pci 0000:00:01.1: reg 0x24: [io 0x2cc0-0x2cff] |
| [ 0.883602] pci 0000:00:01.1: PME# supported from D3hot D3cold |
| [ 0.883706] pci 0000:00:02.0: [10de:005a] type 00 class 0x0c0310 |
| [ 0.883722] pci 0000:00:02.0: reg 0x10: [mem 0xfc300000-0xfc300fff] |
| [ 0.883748] pci 0000:00:02.0: supports D1 D2 |
| [ 0.883760] pci 0000:00:02.0: PME# supported from D0 D1 D2 D3hot D3cold |
| [ 0.883808] pci 0000:00:02.0: System wakeup disabled by ACPI |
| [ 0.889623] pci 0000:00:02.1: [10de:005b] type 00 class 0x0c0320 |
| [ 0.889636] pci 0000:00:02.1: reg 0x10: [mem 0xfc303000-0xfc3030ff] |
| [ 0.889677] pci 0000:00:02.1: supports D1 D2 |
| [ 0.889697] pci 0000:00:02.1: PME# supported from D0 D1 D2 D3hot D3cold |
| [ 0.889757] pci 0000:00:02.1: System wakeup disabled by ACPI |
| [ 0.895557] pci 0000:00:06.0: [10de:0053] type 00 class 0x01018a |
| [ 0.895583] pci 0000:00:06.0: reg 0x20: [io 0x3020-0x302f] |
| [ 0.895611] pci 0000:00:06.0: legacy IDE quirk: reg 0x10: [io 0x01f0-0x01f7] |
| [ 0.902831] pci 0000:00:06.0: legacy IDE quirk: reg 0x14: [io 0x03f6] |
| [ 0.909449] pci 0000:00:06.0: legacy IDE quirk: reg 0x18: [io 0x0170-0x0177] |
| [ 0.916668] pci 0000:00:06.0: legacy IDE quirk: reg 0x1c: [io 0x0376] |
| [ 0.923392] pci 0000:00:07.0: [10de:0054] type 00 class 0x010185 |
| [ 0.923404] pci 0000:00:07.0: reg 0x10: [io 0x3050-0x3057] |
| [ 0.923409] pci 0000:00:07.0: reg 0x14: [io 0x3070-0x3073] |
| [ 0.923413] pci 0000:00:07.0: reg 0x18: [io 0x3058-0x305f] |
| [ 0.923418] pci 0000:00:07.0: reg 0x1c: [io 0x3074-0x3077] |
| [ 0.923422] pci 0000:00:07.0: reg 0x20: [io 0x3030-0x303f] |
| [ 0.923427] pci 0000:00:07.0: reg 0x24: [mem 0xfc301000-0xfc301fff] |
| [ 0.923597] pci 0000:00:08.0: [10de:0055] type 00 class 0x010185 |
| [ 0.923606] pci 0000:00:08.0: reg 0x10: [io 0x3060-0x3067] |
| [ 0.923611] pci 0000:00:08.0: reg 0x14: [io 0x3078-0x307b] |
| [ 0.923616] pci 0000:00:08.0: reg 0x18: [io 0x3068-0x306f] |
| [ 0.923620] pci 0000:00:08.0: reg 0x1c: [io 0x307c-0x307f] |
| [ 0.923625] pci 0000:00:08.0: reg 0x20: [io 0x3040-0x304f] |
| [ 0.923630] pci 0000:00:08.0: reg 0x24: [mem 0xfc302000-0xfc302fff] |
| [ 0.923802] pci 0000:00:09.0: [10de:005c] type 01 class 0x060400 |
| [ 0.923917] pci 0000:00:09.0: System wakeup disabled by ACPI |
| [ 0.929732] pci 0000:00:0b.0: [10de:005d] type 01 class 0x060400 |
| [ 0.929783] pci 0000:00:0b.0: PME# supported from D0 D1 D2 D3hot D3cold |
| [ 0.929832] pci 0000:00:0b.0: System wakeup disabled by ACPI |
| [ 0.935645] pci 0000:00:0c.0: [10de:005d] type 01 class 0x060400 |
| [ 0.935701] pci 0000:00:0c.0: PME# supported from D0 D1 D2 D3hot D3cold |
| [ 0.935757] pci 0000:00:0c.0: System wakeup disabled by ACPI |
| [ 0.941575] pci 0000:00:0d.0: [10de:005d] type 01 class 0x060400 |
| [ 0.941625] pci 0000:00:0d.0: PME# supported from D0 D1 D2 D3hot D3cold |
| [ 0.941673] pci 0000:00:0d.0: System wakeup disabled by ACPI |
| [ 0.947464] pci 0000:00:0e.0: [10de:005d] type 01 class 0x060400 |
| [ 0.947513] pci 0000:00:0e.0: PME# supported from D0 D1 D2 D3hot D3cold |
| [ 0.947570] pci 0000:00:0e.0: System wakeup disabled by ACPI |
| [ 0.953392] pci 0000:00:18.0: [1022:1200] type 00 class 0x060000 |
| [ 0.953567] pci 0000:00:18.1: [1022:1201] type 00 class 0x060000 |
| [ 0.953676] pci 0000:00:18.2: [1022:1202] type 00 class 0x060000 |
| [ 0.953795] pci 0000:00:18.3: [1022:1203] type 00 class 0x060000 |
| [ 0.953941] pci 0000:00:18.4: [1022:1204] type 00 class 0x060000 |
| [ 0.954064] pci 0000:00:19.0: [1022:1200] type 00 class 0x060000 |
| [ 0.954191] pci 0000:00:19.1: [1022:1201] type 00 class 0x060000 |
| [ 0.954338] pci 0000:00:19.2: [1022:1202] type 00 class 0x060000 |
| [ 0.954461] pci 0000:00:19.3: [1022:1203] type 00 class 0x060000 |
| [ 0.954637] pci 0000:00:19.4: [1022:1204] type 00 class 0x060000 |
| [ 0.954824] pci 0000:01:04.0: [18ca:0020] type 00 class 0x030000 |
| [ 0.954867] pci 0000:01:04.0: reg 0x10: [mem 0xf8000000-0xfbffffff pref] |
| [ 0.954883] pci 0000:01:04.0: reg 0x14: [mem 0xfc000000-0xfc03ffff] |
| [ 0.954894] pci 0000:01:04.0: reg 0x18: [io 0x1000-0x107f] |
| [ 0.954947] pci 0000:01:04.0: supports D1 D2 |
| [ 0.955035] pci 0000:00:09.0: PCI bridge to [bus 01] |
| [ 0.960099] pci 0000:00:09.0: bridge window [io 0x1000-0x1fff] |
| [ 0.960102] pci 0000:00:09.0: bridge window [mem 0xfc000000-0xfc0fffff] |
| [ 0.960105] pci 0000:00:09.0: bridge window [mem 0xf8000000-0xfbffffff pref] |
| [ 0.960213] pci 0000:02:00.0: [14e4:1659] type 00 class 0x020000 |
| [ 0.960255] pci 0000:02:00.0: reg 0x10: [mem 0xfc100000-0xfc10ffff 64bit] |
| [ 0.960291] pci 0000:02:00.0: reg 0x30: [mem 0x68400000-0x6840ffff pref] |
| [ 0.960378] pci 0000:02:00.0: PME# supported from D3hot D3cold |
| [ 0.960499] pci 0000:02:00.0: disabling ASPM on pre-1.1 PCIe device. You can enable it with 'pcie_aspm=force' |
| [ 0.970627] pci 0000:00:0b.0: PCI bridge to [bus 02] |
| [ 0.975690] pci 0000:00:0b.0: bridge window [mem 0xfc100000-0xfc1fffff] |
| [ 0.975797] pci 0000:03:00.0: [14e4:1659] type 00 class 0x020000 |
| [ 0.975829] pci 0000:03:00.0: reg 0x10: [mem 0xfc200000-0xfc20ffff 64bit] |
| [ 0.975935] pci 0000:03:00.0: PME# supported from D3hot D3cold |
| [ 0.976030] pci 0000:03:00.0: disabling ASPM on pre-1.1 PCIe device. You can enable it with 'pcie_aspm=force' |
| [ 0.986151] pci 0000:00:0c.0: PCI bridge to [bus 03] |
| [ 0.991206] pci 0000:00:0c.0: bridge window [mem 0xfc200000-0xfc2fffff] |
| [ 0.991290] pci 0000:00:0d.0: PCI bridge to [bus 04] |
| [ 0.996410] pci 0000:00:0e.0: PCI bridge to [bus 05] |
| [ 1.001504] pci_bus 0000:00: on NUMA node 0 |
| [ 1.001607] ACPI: PCI Interrupt Link [LNKA] (IRQs *16 17 18 19) |
| [ 1.008021] ACPI: PCI Interrupt Link [LNKB] (IRQs 16 *17 18 19) |
| [ 1.014441] ACPI: PCI Interrupt Link [LNKC] (IRQs 16 17 18 19) *0, disabled. |
| [ 1.022119] ACPI: PCI Interrupt Link [LNKD] (IRQs 16 17 18 19) *0, disabled. |
| [ 1.029769] ACPI: PCI Interrupt Link [LNKE] (IRQs 16 17 18 19) *0, disabled. |
| [ 1.037465] ACPI: PCI Interrupt Link [LLAS] (IRQs 20 21 22 23) *0, disabled. |
| [ 1.045116] ACPI: PCI Interrupt Link [LUOH] (IRQs 20 21 22 *23) |
| [ 1.051536] ACPI: PCI Interrupt Link [LUEH] (IRQs 20 21 *22 23) |
| [ 1.057959] ACPI: PCI Interrupt Link [LAUD] (IRQs 20 21 22 23) *0, disabled. |
| [ 1.065616] ACPI: PCI Interrupt Link [LMOD] (IRQs 20 21 22 23) *0, disabled. |
| [ 1.073274] ACPI: PCI Interrupt Link [LPA0] (IRQs 20 21 22 23) *0, disabled. |
| [ 1.080920] ACPI: PCI Interrupt Link [LSA0] (IRQs 20 *21 22 23) |
| [ 1.087338] ACPI: PCI Interrupt Link [LSA1] (IRQs *20 21 22 23) |
| [ 1.093793] ACPI: PCI Interrupt Link [LEMA] (IRQs 20 21 22 23) *0, disabled. |
| [ 1.101439] ACPI: PCI Interrupt Link [LUB0] (IRQs 20 21 22 23) *0, disabled. |
| [ 1.109082] ACPI: PCI Interrupt Link [LUB2] (IRQs 20 21 22 23) *0, disabled. |
| [ 1.116749] ACPI: PCI Interrupt Link [LKSM] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled. |
| [ 1.125864] ACPI: PCI Interrupt Link [LNIA] (IRQs 16) *0, disabled. |
| [ 1.132586] ACPI: PCI Interrupt Link [LNIB] (IRQs 17) *0, disabled. |
| [ 1.139311] ACPI: PCI Interrupt Link [LNIC] (IRQs 18) *0, disabled. |
| [ 1.146031] ACPI: PCI Interrupt Link [LNND] (IRQs 19) *0, disabled. |
| [ 1.153015] ACPI: Enabled 1 GPEs in block 00 to 1F |
| [ 1.158269] vgaarb: setting as boot device: PCI:0000:01:04.0 |
| [ 1.164054] vgaarb: device added: PCI:0000:01:04.0,decodes=io+mem,owns=io+mem,locks=none |
| [ 1.172245] vgaarb: loaded |
| [ 1.175044] vgaarb: bridge control possible 0000:01:04.0 |
| [ 1.180614] PCI: Using ACPI for IRQ routing |
| [ 1.184889] PCI: pci_cache_line_size set to 64 bytes |
| [ 1.184946] e820: reserve RAM buffer [mem 0x0009fc00-0x0009ffff] |
| [ 1.184949] e820: reserve RAM buffer [mem 0xdffa9000-0xdfffffff] |
| [ 1.185262] HPET: 3 timers in total, 0 timers will be used for per-cpu timer |
| [ 1.192399] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 31 |
| [ 1.197683] hpet0: 3 comparators, 32-bit 25.000000 MHz counter |
| [ 1.206412] Switched to clocksource hpet |
| [ 1.221923] pnp: PnP ACPI init |
| [ 1.225143] ACPI: bus type PNP registered |
| [ 1.229778] pnp 00:00: Plug and Play ACPI device, IDs PNP0303 PNP030b (active) |
| [ 1.229859] pnp 00:01: Plug and Play ACPI device, IDs PNP0f03 PNP0f13 (active) |
| [ 1.229957] pnp 00:02: Plug and Play ACPI device, IDs PNP0501 (active) |
| [ 1.230036] pnp 00:03: Plug and Play ACPI device, IDs PNP0501 (active) |
| [ 1.230077] pnp 00:04: [dma 2] |
| [ 1.230119] pnp 00:04: Plug and Play ACPI device, IDs PNP0700 (active) |
| [ 1.230141] pnp: PnP ACPI: found 5 devices |
| [ 1.234344] ACPI: bus type PNP unregistered |
| [ 1.246419] pci 0000:02:00.0: can't claim BAR 6 [mem 0x68400000-0x6840ffff pref]: no compatible bridge window |
| [ 1.256483] pci 0000:00:09.0: PCI bridge to [bus 01] |
| [ 1.261529] pci 0000:00:09.0: bridge window [io 0x1000-0x1fff] |
| [ 1.267713] pci 0000:00:09.0: bridge window [mem 0xfc000000-0xfc0fffff] |
| [ 1.274587] pci 0000:00:09.0: bridge window [mem 0xf8000000-0xfbffffff pref] |
| [ 1.281922] pci 0000:02:00.0: BAR 6: assigned [mem 0xfc110000-0xfc11ffff pref] |
| [ 1.289275] pci 0000:00:0b.0: PCI bridge to [bus 02] |
| [ 1.294319] pci 0000:00:0b.0: bridge window [mem 0xfc100000-0xfc1fffff] |
| [ 1.301195] pci 0000:00:0c.0: PCI bridge to [bus 03] |
| [ 1.306241] pci 0000:00:0c.0: bridge window [mem 0xfc200000-0xfc2fffff] |
| [ 1.313117] pci 0000:00:0d.0: PCI bridge to [bus 04] |
| [ 1.318163] pci 0000:00:0e.0: PCI bridge to [bus 05] |
| [ 1.323209] pci_bus 0000:00: resource 4 [io 0x0d00-0x3fff] |
| [ 1.323211] pci_bus 0000:00: resource 5 [mem 0xf8000000-0xfbffffff] |
| [ 1.323214] pci_bus 0000:00: resource 6 [mem 0xfc000000-0xfc3fffff] |
| [ 1.323217] pci_bus 0000:00: resource 7 [io 0x0000-0x0cf7] |
| [ 1.323220] pci_bus 0000:01: resource 0 [io 0x1000-0x1fff] |
| [ 1.323222] pci_bus 0000:01: resource 1 [mem 0xfc000000-0xfc0fffff] |
| [ 1.323225] pci_bus 0000:01: resource 2 [mem 0xf8000000-0xfbffffff pref] |
| [ 1.323228] pci_bus 0000:02: resource 1 [mem 0xfc100000-0xfc1fffff] |
| [ 1.323231] pci_bus 0000:03: resource 1 [mem 0xfc200000-0xfc2fffff] |
| [ 1.323369] NET: Registered protocol family 2 |
| [ 1.328334] TCP established hash table entries: 65536 (order: 7, 524288 bytes) |
| [ 1.336117] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes) |
| [ 1.343530] TCP: Hash tables configured (established 65536 bind 65536) |
| [ 1.350226] TCP: reno registered |
| [ 1.353548] UDP hash table entries: 4096 (order: 5, 131072 bytes) |
| [ 1.359824] UDP-Lite hash table entries: 4096 (order: 5, 131072 bytes) |
| [ 1.366692] NET: Registered protocol family 1 |
| [ 1.371530] ACPI: PCI Interrupt Link [LUB0] enabled at IRQ 23 |
| [ 1.377753] ACPI: PCI Interrupt Link [LUB2] enabled at IRQ 22 |
| [ 1.383734] pci 0000:00:00.0: Found enabled HT MSI Mapping |
| [ 1.389344] pci 0000:00:00.0: Found enabled HT MSI Mapping |
| [ 1.394922] pci 0000:00:0b.0: Found disabled HT MSI Mapping |
| [ 1.400578] pci 0000:00:00.0: Found enabled HT MSI Mapping |
| [ 1.406184] pci 0000:00:00.0: Found enabled HT MSI Mapping |
| [ 1.411763] pci 0000:00:0c.0: Found disabled HT MSI Mapping |
| [ 1.417420] pci 0000:00:00.0: Found enabled HT MSI Mapping |
| [ 1.423015] pci 0000:00:00.0: Found enabled HT MSI Mapping |
| [ 1.428600] pci 0000:00:0d.0: Found disabled HT MSI Mapping |
| [ 1.434253] pci 0000:00:00.0: Found enabled HT MSI Mapping |
| [ 1.439862] pci 0000:00:00.0: Found enabled HT MSI Mapping |
| [ 1.445450] pci 0000:00:0e.0: Found disabled HT MSI Mapping |
| [ 1.451103] pci 0000:00:00.0: Found enabled HT MSI Mapping |
| [ 1.456690] pci 0000:01:04.0: Video device with shadowed ROM |
| [ 1.456698] PCI: CLS 64 bytes, default 64 |
| [ 1.456806] Unpacking initramfs... |
| [ 1.689797] Freeing initrd memory: 8744K (ffff88007f775000 - ffff88007ffff000) |
| [ 1.697750] PCI-DMA: Disabling AGP. |
| [ 1.702971] PCI-DMA: aperture base @ d4000000 size 65536 KB |
| [ 1.708638] PCI-DMA: using GART IOMMU. |
| [ 1.712467] PCI-DMA: Reserving 64MB of IOMMU area in the AGP aperture |
| [ 1.724591] platform rtc_cmos: registered platform RTC device (no PNP device found) |
| [ 1.732934] microcode: CPU0: patch_level=0x01000096 |
| [ 1.737938] microcode: CPU1: patch_level=0x01000096 |
| [ 1.742951] microcode: CPU2: patch_level=0x01000096 |
| [ 1.747955] microcode: CPU3: patch_level=0x01000096 |
| [ 1.752965] microcode: CPU4: patch_level=0x01000096 |
| [ 1.757954] microcode: CPU5: patch_level=0x01000096 |
| [ 1.762947] microcode: CPU6: patch_level=0x01000096 |
| [ 1.769051] microcode: CPU7: patch_level=0x01000096 |
| [ 1.774143] microcode: Microcode Update Driver: v2.00 <tigran@aivazian.fsnet.co.uk>, Peter Oruba |
| [ 1.783081] LVT offset 1 assigned for vector 0x400 |
| [ 1.787986] IBS: LVT offset 1 assigned |
| [ 1.791865] perf: AMD IBS detected (0x00000007) |
| [ 1.797092] futex hash table entries: 2048 (order: 5, 131072 bytes) |
| [ 1.803587] audit: initializing netlink subsys (disabled) |
| [ 1.809100] audit: type=2000 audit(1429568184.624:1): initialized |
| [ 1.816006] HugeTLB registered 2 MB page size, pre-allocated 0 pages |
| [ 1.822533] zbud: loaded |
| [ 1.825481] VFS: Disk quotas dquot_6.5.2 |
| [ 1.829541] Dquot-cache hash table entries: 512 (order 0, 4096 bytes) |
| [ 1.836187] msgmni has been set to 9941 |
| [ 1.840649] alg: No test for stdrng (krng) |
| [ 1.844923] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252) |
| [ 1.852567] io scheduler noop registered |
| [ 1.856594] io scheduler deadline registered |
| [ 1.861034] io scheduler cfq registered (default) |
| [ 1.866036] pcieport 0000:00:0b.0: irq 40 for MSI/MSI-X |
| [ 1.866164] pcieport 0000:00:0c.0: irq 41 for MSI/MSI-X |
| [ 1.866301] pcieport 0000:00:0d.0: irq 42 for MSI/MSI-X |
| [ 1.866419] pcieport 0000:00:0e.0: irq 43 for MSI/MSI-X |
| [ 1.866570] aer 0000:00:0b.0:pcie02: service driver aer loaded |
| [ 1.866598] aer 0000:00:0c.0:pcie02: service driver aer loaded |
| [ 1.866624] aer 0000:00:0d.0:pcie02: service driver aer loaded |
| [ 1.866650] aer 0000:00:0e.0:pcie02: service driver aer loaded |
| [ 1.866670] pcieport 0000:00:0b.0: Signaling PME through PCIe PME interrupt |
| [ 1.873768] pci 0000:02:00.0: Signaling PME through PCIe PME interrupt |
| [ 1.880385] pcie_pme 0000:00:0b.0:pcie01: service driver pcie_pme loaded |
| [ 1.880395] pcieport 0000:00:0c.0: Signaling PME through PCIe PME interrupt |
| [ 1.887439] pci 0000:03:00.0: Signaling PME through PCIe PME interrupt |
| [ 1.894047] pcie_pme 0000:00:0c.0:pcie01: service driver pcie_pme loaded |
| [ 1.894057] pcieport 0000:00:0d.0: Signaling PME through PCIe PME interrupt |
| [ 1.901101] pcie_pme 0000:00:0d.0:pcie01: service driver pcie_pme loaded |
| [ 1.901112] pcieport 0000:00:0e.0: Signaling PME through PCIe PME interrupt |
| [ 1.908154] pcie_pme 0000:00:0e.0:pcie01: service driver pcie_pme loaded |
| [ 1.908184] pci_hotplug: PCI Hot Plug PCI Core version: 0.5 |
| [ 1.913862] pciehp: PCI Express Hot Plug Controller Driver version: 0.4 |
| [ 1.920693] GHES: HEST is not enabled! |
| [ 1.924648] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled |
| [ 1.951433] 00:02: ttyS0 at I/O 0x3f8 (irq = 4, base_baud = 115200) is a 16550A |
| [ 1.979222] 00:03: ttyS1 at I/O 0x2f8 (irq = 3, base_baud = 115200) is a 16550A |
| [ 1.987252] Linux agpgart interface v0.103 |
| [ 1.991677] i8042: PNP: PS/2 Controller [PNP0303:KBD,PNP0f03:MOU] at 0x60,0x64 irq 1,12 |
| [ 2.002288] serio: i8042 KBD port at 0x60,0x64 irq 1 |
| [ 2.007415] serio: i8042 AUX port at 0x60,0x64 irq 12 |
| [ 2.012736] mousedev: PS/2 mouse device common for all mice |
| [ 2.018522] rtc_cmos rtc_cmos: RTC can wake from S4 |
| [ 2.023740] rtc_cmos rtc_cmos: rtc core: registered rtc_cmos as rtc0 |
| [ 2.030229] rtc_cmos rtc_cmos: alarms up to one year, y3k, 114 bytes nvram, hpet irqs |
| [ 2.038190] ledtrig-cpu: registered to indicate activity on CPUs |
| [ 2.044451] AMD IOMMUv2 driver by Joerg Roedel <joerg.roedel@amd.com> |
| [ 2.050966] AMD IOMMUv2 functionality not available on this system |
| [ 2.057369] TCP: cubic registered |
| [ 2.060918] NET: Registered protocol family 10 |
| [ 2.065885] mip6: Mobile IPv6 |
| [ 2.068962] NET: Registered protocol family 17 |
| [ 2.073564] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input0 |
| [ 2.082340] mpls_gso: MPLS GSO support |
| [ 2.087085] registered taskstats version 1 |
| [ 2.092014] rtc_cmos rtc_cmos: setting system clock to 2015-04-20 22:16:26 UTC (1429568186) |
| [ 2.100601] PM: Hibernation image not present or could not be loaded. |
| [ 2.102414] Freeing unused kernel memory: 1204K (ffffffff818ed000 - ffffffff81a1a000) |
| [ 2.110413] Write protecting the kernel read-only data: 8192k |
| [ 2.119753] Freeing unused kernel memory: 928K (ffff880001518000 - ffff880001600000) |
| [ 2.128482] Freeing unused kernel memory: 216K (ffff8800017ca000 - ffff880001800000) |
| [ 2.148581] systemd-udevd[99]: starting version 215 |
| [ 2.154137] random: systemd-udevd urandom read with 4 bits of entropy available |
| [ 2.176755] pps_core: LinuxPPS API ver. 1 registered |
| [ 2.176881] ACPI: bus type USB registered |
| [ 2.176936] usbcore: registered new interface driver usbfs |
| [ 2.176955] usbcore: registered new interface driver hub |
| [ 2.177105] usbcore: registered new device driver usb |
| [ 2.202052] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it> |
| [ 2.211615] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver |
| [ 2.218571] PTP clock support registered |
| [ 2.222879] ehci-pci: EHCI PCI platform driver |
| [ 2.227760] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver |
| [ 2.227795] ehci-pci 0000:00:02.1: EHCI Host Controller |
| [ 2.227813] ehci-pci 0000:00:02.1: new USB bus registered, assigned bus number 1 |
| [ 2.227833] ehci-pci 0000:00:02.1: debug port 1 |
| [ 2.227878] ehci-pci 0000:00:02.1: cache line size of 64 is not supported |
| [ 2.227905] ehci-pci 0000:00:02.1: irq 22, io mem 0xfc303000 |
| [ 2.238087] ehci-pci 0000:00:02.1: USB 2.0 started, EHCI 1.00 |
| [ 2.238171] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002 |
| [ 2.238173] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 |
| [ 2.238174] usb usb1: Product: EHCI Host Controller |
| [ 2.238176] usb usb1: Manufacturer: Linux 3.16.0-4-amd64 ehci_hcd |
| [ 2.238177] usb usb1: SerialNumber: 0000:00:02.1 |
| [ 2.238646] hub 1-0:1.0: USB hub found |
| [ 2.238657] hub 1-0:1.0: 10 ports detected |
| [ 2.301413] tg3.c:v3.137 (May 11, 2014) |
| [ 2.305504] tg3 0000:02:00.0: enabling device (0004 -> 0006) |
| [ 2.305593] ohci-pci: OHCI PCI platform driver |
| [ 2.316112] ohci-pci 0000:00:02.0: OHCI PCI host controller |
| [ 2.321815] ohci-pci 0000:00:02.0: new USB bus registered, assigned bus number 2 |
| [ 2.322050] ACPI: PCI Interrupt Link [LNIB] enabled at IRQ 17 |
| [ 2.335211] ohci-pci 0000:00:02.0: irq 23, io mem 0xfc300000 |
| [ 2.377215] tg3 0000:02:00.0 eth0: Tigon3 [partno(BCM95721) rev 4201] (PCI Express) MAC address 00:1e:8c:51:61:a2 |
| [ 2.387638] tg3 0000:02:00.0 eth0: attached PHY is 5750 (10/100/1000Base-T Ethernet) (WireSpeed[1], EEE[0]) |
| [ 2.396095] usb usb2: New USB device found, idVendor=1d6b, idProduct=0001 |
| [ 2.396098] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1 |
| [ 2.396099] usb usb2: Product: OHCI PCI host controller |
| [ 2.396101] usb usb2: Manufacturer: Linux 3.16.0-4-amd64 ohci_hcd |
| [ 2.396102] usb usb2: SerialNumber: 0000:00:02.0 |
| [ 2.396313] hub 2-0:1.0: USB hub found |
| [ 2.396322] hub 2-0:1.0: 10 ports detected |
| [ 2.435775] tg3 0000:02:00.0 eth0: RXcsums[1] LinkChgREG[0] MIirq[0] ASF[0] TSOcap[1] |
| [ 2.443724] tg3 0000:02:00.0 eth0: dma_rwctrl[76180000] dma_mask[64-bit] |
| [ 2.450636] tg3 0000:03:00.0: enabling device (0004 -> 0006) |
| [ 2.456622] ACPI: PCI Interrupt Link [LNIA] enabled at IRQ 16 |
| [ 2.506504] tg3 0000:03:00.0 eth1: Tigon3 [partno(BCM95721) rev 4201] (PCI Express) MAC address 00:1e:8c:51:63:95 |
| [ 2.516946] tg3 0000:03:00.0 eth1: attached PHY is 5750 (10/100/1000Base-T Ethernet) (WireSpeed[1], EEE[0]) |
| [ 2.526816] tg3 0000:03:00.0 eth1: RXcsums[1] LinkChgREG[0] MIirq[0] ASF[0] TSOcap[1] |
| [ 2.534781] tg3 0000:03:00.0 eth1: dma_rwctrl[76180000] dma_mask[64-bit] |
| [ 2.547896] FS-Cache: Loaded |
| [ 2.555168] RPC: Registered named UNIX socket transport module. |
| [ 2.561821] RPC: Registered udp transport module. |
| [ 2.567894] RPC: Registered tcp transport module. |
| [ 2.573987] RPC: Registered tcp NFSv4.1 backchannel transport module. |
| [ 2.586402] FS-Cache: Netfs 'nfs' registered for caching |
| [ 2.600261] tg3 0000:02:00.0: irq 44 for MSI/MSI-X |
| [ 2.646035] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready |
| [ 2.721908] tsc: Refined TSC clocksource calibration: 1909.786 MHz |
| [ 3.725650] Switched to clocksource tsc |
| [ 4.217479] tg3 0000:02:00.0 eth0: Link is up at 100 Mbps, full duplex |
| [ 4.224159] tg3 0000:02:00.0 eth0: Flow control is on for TX and on for RX |
| [ 4.231159] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready |
| [ 5.736005] systemd[1]: systemd 215 running in system mode. (+PAM +AUDIT +SELINUX +IMA +SYSVINIT +LIBCRYPTSETUP +GCRYPT +ACL +XZ -SECCOMP -APPARMOR) |
| [ 5.750195] systemd[1]: Detected architecture 'x86-64'. |
| [ 6.060337] random: nonblocking pool is initialized |
| [ 6.081258] systemd[1]: Inserted module 'autofs4' |
| [ 6.088179] systemd[1]: Set hostname to <cb-test-tgt>. |
| [ 6.683615] systemd[1]: Cannot add dependency job for unit dbus.socket, ignoring: Unit dbus.socket failed to load: No such file or directory. |
| [ 6.696520] systemd[1]: Cannot add dependency job for unit display-manager.service, ignoring: Unit display-manager.service failed to load: No such file or directory. |
| [ 6.711927] systemd[1]: Expecting device dev-ttyS0.device... |
| [ 6.728578] systemd[1]: Starting Forward Password Requests to Wall Directory Watch. |
| [ 6.736435] systemd[1]: Started Forward Password Requests to Wall Directory Watch. |
| [ 6.744141] systemd[1]: Starting Remote File Systems (Pre). |
| [ 6.760637] systemd[1]: Reached target Remote File Systems (Pre). |
| [ 6.766990] systemd[1]: Starting Arbitrary Executable File Formats File System Automount Point. |
| [ 6.788620] systemd[1]: Set up automount Arbitrary Executable File Formats File System Automount Point. |
| [ 6.798278] systemd[1]: Starting Dispatch Password Requests to Console Directory Watch. |
| [ 6.806524] systemd[1]: Started Dispatch Password Requests to Console Directory Watch. |
| [ 6.814592] systemd[1]: Starting Paths. |
| [ 6.828525] systemd[1]: Reached target Paths. |
| [ 6.833005] systemd[1]: Starting Encrypted Volumes. |
| [ 6.848525] systemd[1]: Reached target Encrypted Volumes. |
| [ 6.854042] systemd[1]: Starting Swap. |
| [ 6.868499] systemd[1]: Reached target Swap. |
| [ 6.872901] systemd[1]: Starting Root Slice. |
| [ 6.896500] systemd[1]: Created slice Root Slice. |
| [ 6.901429] systemd[1]: Starting User and Session Slice. |
| [ 6.916528] systemd[1]: Created slice User and Session Slice. |
| [ 6.922456] systemd[1]: Starting Delayed Shutdown Socket. |
| [ 6.936516] systemd[1]: Listening on Delayed Shutdown Socket. |
| [ 6.942393] systemd[1]: Starting /dev/initctl Compatibility Named Pipe. |
| [ 6.960512] systemd[1]: Listening on /dev/initctl Compatibility Named Pipe. |
| [ 6.967636] systemd[1]: Starting Journal Socket (/dev/log). |
| [ 6.984466] systemd[1]: Listening on Journal Socket (/dev/log). |
| [ 6.990546] systemd[1]: Starting Syslog Socket. |
| [ 7.004462] systemd[1]: Listening on Syslog Socket. |
| [ 7.010537] systemd[1]: Starting udev Kernel Socket. |
| [ 7.024455] systemd[1]: Listening on udev Kernel Socket. |
| [ 7.029909] systemd[1]: Starting udev Control Socket. |
| [ 7.044438] systemd[1]: Listening on udev Control Socket. |
| [ 7.049971] systemd[1]: Starting Journal Socket. |
| [ 7.064433] systemd[1]: Listening on Journal Socket. |
| [ 7.069547] systemd[1]: Starting Sockets. |
| [ 7.084425] systemd[1]: Reached target Sockets. |
| [ 7.089086] systemd[1]: Starting System Slice. |
| [ 7.104417] systemd[1]: Created slice System Slice. |
| [ 7.109422] systemd[1]: Starting system-getty.slice. |
| [ 7.124483] systemd[1]: Created slice system-getty.slice. |
| [ 7.130054] systemd[1]: Starting system-serial\x2dgetty.slice. |
| [ 7.148424] systemd[1]: Created slice system-serial\x2dgetty.slice. |
| [ 7.156022] systemd[1]: Starting Create list of required static device nodes for the current kernel... |
| [ 7.181483] systemd[1]: Mounting Debug File System... |
| [ 7.220782] systemd[1]: Started Set Up Additional Binary Formats. |
| [ 7.227055] systemd[1]: Mounting Huge Pages File System... |
| [ 7.272570] systemd[1]: Starting Load Kernel Modules... |
| [ 7.289638] systemd[1]: Mounting POSIX Message Queue File System... |
| [ 7.306115] systemd[1]: Starting udev Coldplug all Devices... |
| [ 7.321514] systemd[1]: Starting Journal Service... |
| [ 7.348424] systemd[1]: Started Journal Service. |
| [ 8.231662] systemd-udevd[188]: starting version 215 |
| [ 8.590819] systemd-journald[167]: Received request to flush runtime journal from PID 1 |
| [ 9.658072] k10temp 0000:00:18.3: unreliable CPU thermal sensor; monitoring disabled |
| [ 9.666170] k10temp 0000:00:19.3: unreliable CPU thermal sensor; monitoring disabled |
| [ 9.746012] SCSI subsystem initialized |
| [ 9.760236] EDAC MC: Ver: 3.0.0 |
| [ 9.763896] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input2 |
| [ 9.772430] ACPI: Power Button [PWRB] |
| [ 9.776357] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input3 |
| [ 9.783890] ACPI: Power Button [PWRF] |
| [ 9.843614] w83793 0-002f: Registered watchdog chardev major 10, minor: 130 |
| [ 9.850749] i2c i2c-0: nForce2 SMBus adapter at 0x2c80 |
| [ 9.899405] FDC 0 is a post-1991 82077 |
| [ 9.953250] libata version 3.00 loaded. |
| [ 9.956464] MCE: In-kernel MCE decoding enabled. |
| [ 9.980431] acpi-cpufreq: overriding BIOS provided _PSD data |
| [ 9.986547] AMD64 EDAC driver v3.4.0 |
| [ 9.991132] input: PC Speaker as /devices/platform/pcspkr/input/input4 |
| [ 10.137897] kvm: Nested Virtualization enabled |
| [ 10.142475] kvm: Nested Paging enabled |
| [ 13.090337] i2c i2c-1: nForce2 SMBus adapter at 0x2cc0 |
| [ 13.095798] pata_amd 0000:00:06.0: version 0.4.1 |
| [ 13.096840] scsi0 : pata_amd |
| [ 13.100129] scsi1 : pata_amd |
| [ 13.103224] ata1: PATA max UDMA/133 cmd 0x1f0 ctl 0x3f6 bmdma 0x3020 irq 14 |
| [ 13.110301] ata2: PATA max UDMA/133 cmd 0x170 ctl 0x376 bmdma 0x3028 irq 15 |
| [ 13.117454] sata_nv 0000:00:07.0: version 3.5 |
| [ 13.117866] ACPI: PCI Interrupt Link [LSA0] enabled at IRQ 21 |
| [ 13.124583] scsi2 : sata_nv |
| [ 13.127750] scsi3 : sata_nv |
| [ 13.130817] ata3: SATA max UDMA/133 cmd 0x3050 ctl 0x3070 bmdma 0x3030 irq 21 |
| [ 13.138075] ata4: SATA max UDMA/133 cmd 0x3058 ctl 0x3074 bmdma 0x3038 irq 21 |
| [ 13.145515] ACPI: PCI Interrupt Link [LSA1] enabled at IRQ 20 |
| [ 13.151853] scsi4 : sata_nv |
| [ 13.154963] scsi5 : sata_nv |
| [ 13.157919] ata5: SATA max UDMA/133 cmd 0x3060 ctl 0x3078 bmdma 0x3040 irq 20 |
| [ 13.165168] ata6: SATA max UDMA/133 cmd 0x3068 ctl 0x307c bmdma 0x3048 irq 20 |
| [ 13.172461] EDAC amd64: DRAM ECC enabled. |
| [ 13.176651] EDAC amd64: F10h detected (node 0). |
| [ 13.181327] EDAC MC: DCT0 chip selects: |
| [ 13.181330] EDAC amd64: MC: 0: 0MB 1: 0MB |
| [ 13.186164] EDAC amd64: MC: 2: 0MB 3: 0MB |
| [ 13.190969] EDAC amd64: MC: 4: 0MB 5: 0MB |
| [ 13.195796] EDAC amd64: MC: 6: 1024MB 7: 1024MB |
| [ 13.200600] EDAC MC: DCT1 chip selects: |
| [ 13.200606] EDAC amd64: MC: 0: 0MB 1: 0MB |
| [ 13.205410] EDAC amd64: MC: 2: 0MB 3: 0MB |
| [ 13.210215] EDAC amd64: MC: 4: 0MB 5: 0MB |
| [ 13.215027] EDAC amd64: MC: 6: 1024MB 7: 1024MB |
| [ 13.219832] EDAC amd64: using x4 syndromes. |
| [ 13.224150] EDAC amd64: MCT channel count: 2 |
| [ 13.228630] EDAC amd64: CS6: Registered DDR2 RAM |
| [ 13.233357] EDAC amd64: CS7: Registered DDR2 RAM |
| [ 13.238363] EDAC MC0: Giving out device to module amd64_edac controller F10h: DEV 0000:00:18.2 (INTERRUPT) |
| [ 13.248246] EDAC amd64: DRAM ECC enabled. |
| [ 13.252445] EDAC amd64: F10h detected (node 1). |
| [ 13.257124] EDAC MC: DCT0 chip selects: |
| [ 13.257128] EDAC amd64: MC: 0: 1024MB 1: 0MB |
| [ 13.261933] EDAC amd64: MC: 2: 0MB 3: 0MB |
| [ 13.266764] EDAC amd64: MC: 4: 0MB 5: 0MB |
| [ 13.271567] EDAC amd64: MC: 6: 0MB 7: 0MB |
| [ 13.276372] EDAC MC: DCT1 chip selects: |
| [ 13.276375] EDAC amd64: MC: 0: 0MB 1: 0MB |
| [ 13.281179] EDAC amd64: MC: 2: 0MB 3: 0MB |
| [ 13.285977] EDAC amd64: MC: 4: 0MB 5: 0MB |
| [ 13.290773] EDAC amd64: MC: 6: 0MB 7: 0MB |
| [ 13.295597] EDAC amd64: using x4 syndromes. |
| [ 13.299876] EDAC amd64: MCT channel count: 1 |
| [ 13.304299] EDAC amd64: CS0: Registered DDR2 RAM |
| [ 13.309218] EDAC MC1: Giving out device to module amd64_edac controller F10h: DEV 0000:00:19.2 (INTERRUPT) |
| [ 13.319114] EDAC PCI0: Giving out device to module amd64_edac controller EDAC PCI controller: DEV 0000:00:18.2 (POLLED) |
| [ 13.319123] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4 |
| [ 13.458214] ata3: SATA link down (SStatus 0 SControl 300) |
| [ 13.482204] ata5: SATA link down (SStatus 0 SControl 300) |
| [ 13.774097] ata4: SATA link down (SStatus 0 SControl 300) |
| [ 14.089978] ata6: SATA link down (SStatus 0 SControl 300) |