blob: 46f023bf6b9f227159f9c9cead4214d0ce3054f3 [file] [log] [blame]
[ 0.000000] Initializing cgroup subsys cpuset
[ 0.000000] Initializing cgroup subsys cpu
[ 0.000000] Initializing cgroup subsys cpuacct
[ 0.000000] Linux version 3.13-1-grml-amd64 (team@grml.org) (gcc version 4.8.2 (Debian 4.8.2-16) ) #1 SMP Debian 3.13.6-1+grml.1 (2014-03-10)
[ 0.000000] Command line: initrd=/boot/grml64small/initrd.img boot=live apm=power-off vga=791 nomce boot=live live-media-path=/live/grml64-small/ boot=live bootid=50cb75e9-61d3-4cda-9c64-fba7e464746e ssh=remote verbose console=ttyS0,115200n8 BOOT_IMAGE=/boot/grml64small/vmlinuz
[ 0.000000] e820: BIOS-provided physical RAM map:
[ 0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009fbff] usable
[ 0.000000] BIOS-e820: [mem 0x000000000009fc00-0x000000000009ffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000000f0000-0x00000000000fffff] reserved
[ 0.000000] BIOS-e820: [mem 0x0000000000100000-0x00000000dfc54fff] usable
[ 0.000000] BIOS-e820: [mem 0x00000000dfc55000-0x00000000dfffffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000f8000000-0x00000000fbffffff] reserved
[ 0.000000] BIOS-e820: [mem 0x0000000100000000-0x000000011effffff] usable
[ 0.000000] NX (Execute Disable) protection: active
[ 0.000000] SMBIOS 2.7 present.
[ 0.000000] DMI: PC Engines APU1/APU1, BIOS 4.0-9873-g7b9762f 06/04/2015
[ 0.000000] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
[ 0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable
[ 0.000000] No AGP bridge found
[ 0.000000] e820: last_pfn = 0x11f000 max_arch_pfn = 0x400000000
[ 0.000000] MTRR default type: uncachable
[ 0.000000] MTRR fixed ranges enabled:
[ 0.000000] 00000-9FFFF write-back
[ 0.000000] A0000-BFFFF uncachable
[ 0.000000] C0000-FFFFF write-back
[ 0.000000] MTRR variable ranges enabled:
[ 0.000000] 0 base 000000000 mask F80000000 write-back
[ 0.000000] 1 base 080000000 mask FC0000000 write-back
[ 0.000000] 2 base 0C0000000 mask FE0000000 write-back
[ 0.000000] 3 disabled
[ 0.000000] 4 disabled
[ 0.000000] 5 disabled
[ 0.000000] 6 base 0FFE00000 mask FFFE00000 write-protect
[ 0.000000] 7 disabled
[ 0.000000] TOM2: 000000011f000000 aka 4592M
[ 0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
[ 0.000000] e820: last_pfn = 0xdfc55 max_arch_pfn = 0x400000000
[ 0.000000] found SMP MP-table at [mem 0x000f24c0-0x000f24cf] mapped at [ffff8800000f24c0]
[ 0.000000] Scanning 1 areas for low memory corruption
[ 0.000000] Base memory trampoline at [ffff880000099000] 99000 size 24576
[ 0.000000] Using GB pages for direct mapping
[ 0.000000] init_memory_mapping: [mem 0x00000000-0x000fffff]
[ 0.000000] [mem 0x00000000-0x000fffff] page 4k
[ 0.000000] BRK [0x01aa0000, 0x01aa0fff] PGTABLE
[ 0.000000] BRK [0x01aa1000, 0x01aa1fff] PGTABLE
[ 0.000000] BRK [0x01aa2000, 0x01aa2fff] PGTABLE
[ 0.000000] init_memory_mapping: [mem 0x11ee00000-0x11effffff]
[ 0.000000] [mem 0x11ee00000-0x11effffff] page 2M
[ 0.000000] BRK [0x01aa3000, 0x01aa3fff] PGTABLE
[ 0.000000] init_memory_mapping: [mem 0x11c000000-0x11edfffff]
[ 0.000000] [mem 0x11c000000-0x11edfffff] page 2M
[ 0.000000] init_memory_mapping: [mem 0x100000000-0x11bffffff]
[ 0.000000] [mem 0x100000000-0x11bffffff] page 2M
[ 0.000000] init_memory_mapping: [mem 0x00100000-0xdfc54fff]
[ 0.000000] [mem 0x00100000-0x001fffff] page 4k
[ 0.000000] [mem 0x00200000-0x3fffffff] page 2M
[ 0.000000] [mem 0x40000000-0xbfffffff] page 1G
[ 0.000000] [mem 0xc0000000-0xdfbfffff] page 2M
[ 0.000000] [mem 0xdfc00000-0xdfc54fff] page 4k
[ 0.000000] RAMDISK: [mem 0x7efcc000-0x7fffefff]
[ 0.000000] ACPI: RSDP 00000000000f2690 000024 (v02 CORE )
[ 0.000000] ACPI: XSDT 00000000dfc700e0 000064 (v01 CORE COREBOOT 00000000 CORE 00000000)
[ 0.000000] ACPI: FACP 00000000dfc72a00 0000F4 (v04 CORE COREBOOT 00000000 CORE 00000000)
[ 0.000000] ACPI: DSDT 00000000dfc70250 0027A8 (v02 PCENG COREBOOT 00010001 INTL 20150204)
[ 0.000000] ACPI: FACS 00000000dfc70210 000040
[ 0.000000] ACPI: SSDT 00000000dfc72b00 000045 (v02 CORE COREBOOT 0000002A CORE 0000002A)
[ 0.000000] ACPI: TCPA 00000000dfc72b50 000032 (v02 CORE COREBOOT 00000000 CORE 00000000)
[ 0.000000] ACPI: APIC 00000000dfc72b90 00005C (v01 CORE COREBOOT 00000000 CORE 00000000)
[ 0.000000] ACPI: HEST 00000000dfc72bf0 000198 (v01 CORE COREBOOT 00000000 CORE 00000000)
[ 0.000000] ACPI: SSDT 00000000dfc72d90 00168E (v02 AMD ALIB 00000001 MSFT 04000000)
[ 0.000000] ACPI: SSDT 00000000dfc74420 00030C (v01 AMD POWERNOW 00000001 AMD 00000001)
[ 0.000000] ACPI: HPET 00000000dfc74730 000038 (v01 CORE COREBOOT 00000000 CORE 00000000)
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] No NUMA configuration found
[ 0.000000] Faking a node at [mem 0x0000000000000000-0x000000011effffff]
[ 0.000000] Initmem setup node 0 [mem 0x00000000-0x11effffff]
[ 0.000000] NODE_DATA [mem 0x11eff9000-0x11effdfff]
[ 0.000000] [ffffea0000000000-ffffea0003ffffff] PMD -> [ffff88011a600000-ffff88011dffffff] on node 0
[ 0.000000] Zone ranges:
[ 0.000000] DMA [mem 0x00001000-0x00ffffff]
[ 0.000000] DMA32 [mem 0x01000000-0xffffffff]
[ 0.000000] Normal [mem 0x100000000-0x11effffff]
[ 0.000000] Movable zone start for each node
[ 0.000000] Early memory node ranges
[ 0.000000] node 0: [mem 0x00001000-0x0009efff]
[ 0.000000] node 0: [mem 0x00100000-0xdfc54fff]
[ 0.000000] node 0: [mem 0x100000000-0x11effffff]
[ 0.000000] On node 0 totalpages: 1043443
[ 0.000000] DMA zone: 56 pages used for memmap
[ 0.000000] DMA zone: 21 pages reserved
[ 0.000000] DMA zone: 3998 pages, LIFO batch:0
[ 0.000000] DMA32 zone: 12476 pages used for memmap
[ 0.000000] DMA32 zone: 912469 pages, LIFO batch:31
[ 0.000000] Normal zone: 1736 pages used for memmap
[ 0.000000] Normal zone: 126976 pages, LIFO batch:31
[ 0.000000] ACPI: PM-Timer IO Port: 0x808
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled)
[ 0.000000] ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
[ 0.000000] IOAPIC[0]: apic_id 2, version 33, address 0xfec00000, GSI 0-23
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 low level)
[ 0.000000] ACPI: IRQ0 used by override.
[ 0.000000] ACPI: IRQ2 used by override.
[ 0.000000] ACPI: IRQ9 used by override.
[ 0.000000] Using ACPI (MADT) for SMP configuration information
[ 0.000000] ACPI: HPET id: 0x43538210 base: 0xfed00000
[ 0.000000] smpboot: Allowing 2 CPUs, 0 hotplug CPUs
[ 0.000000] nr_irqs_gsi: 40
[ 0.000000] PM: Registered nosave memory: [mem 0x0009f000-0x0009ffff]
[ 0.000000] PM: Registered nosave memory: [mem 0x000a0000-0x000effff]
[ 0.000000] PM: Registered nosave memory: [mem 0x000f0000-0x000fffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xdfc55000-0xdfffffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xe0000000-0xf7ffffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xf8000000-0xfbffffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfc000000-0xffffffff]
[ 0.000000] e820: [mem 0xe0000000-0xf7ffffff] available for PCI devices
[ 0.000000] Booting paravirtualized kernel on bare hardware
[ 0.000000] setup_percpu: NR_CPUS:512 nr_cpumask_bits:512 nr_cpu_ids:2 nr_node_ids:1
[ 0.000000] PERCPU: Embedded 28 pages/cpu @ffff88011ec00000 s85824 r8192 d20672 u1048576
[ 0.000000] pcpu-alloc: s85824 r8192 d20672 u1048576 alloc=1*2097152
[ 0.000000] pcpu-alloc: [0] 0 1
[ 0.000000] Built 1 zonelists in Node order, mobility grouping on. Total pages: 1029154
[ 0.000000] Policy zone: Normal
[ 0.000000] Kernel command line: initrd=/boot/grml64small/initrd.img boot=live apm=power-off vga=791 nomce boot=live live-media-path=/live/grml64-small/ boot=live bootid=50cb75e9-61d3-4cda-9c64-fba7e464746e ssh=remote verbose console=ttyS0,115200n8 BOOT_IMAGE=/boot/grml64small/vmlinuz
[ 0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes)
[ 0.000000] Checking aperture...
[ 0.000000] No AGP bridge found
[ 0.000000] Calgary: detecting Calgary via BIOS EBDA area
[ 0.000000] Calgary: Unable to locate Rio Grande table in EBDA - bailing!
[ 0.000000] Memory: 4020252K/4173772K available (4965K kernel code, 697K rwdata, 1716K rodata, 1004K init, 952K bss, 153520K reserved)
[ 0.000000] Hierarchical RCU implementation.
[ 0.000000] RCU dyntick-idle grace-period acceleration is enabled.
[ 0.000000] RCU restricting CPUs from NR_CPUS=512 to nr_cpu_ids=2.
[ 0.000000] NR_IRQS:33024 nr_irqs:512 16
[ 0.000000] Console: colour dummy device 80x25
[ 0.000000] console [ttyS0] enabled
[ 0.000000] hpet clockevent registered
[ 0.000000] tsc: Fast TSC calibration using PIT
[ 0.004000] tsc: Detected 999.977 MHz processor
[ 0.000007] Calibrating delay loop (skipped), value calculated using timer frequency.. 1999.95 BogoMIPS (lpj=3999908)
[ 0.010653] pid_max: default: 32768 minimum: 301
[ 0.015378] Security Framework initialized
[ 0.019545] AppArmor: AppArmor disabled by boot time parameter
[ 0.025394] Yama: disabled by default; enable with sysctl kernel.yama.*
[ 0.032760] Dentry cache hash table entries: 524288 (order: 10, 4194304 bytes)
[ 0.044104] Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes)
[ 0.053131] Mount-cache hash table entries: 256
[ 0.058277] Initializing cgroup subsys memory
[ 0.062729] Initializing cgroup subsys devices
[ 0.067185] Initializing cgroup subsys freezer
[ 0.071649] Initializing cgroup subsys blkio
[ 0.075939] Initializing cgroup subsys perf_event
[ 0.080728] tseg: 0000000000
[ 0.080744] CPU: Physical Processor ID: 0
[ 0.084815] CPU: Processor Core ID: 0
[ 0.088492] Last level iTLB entries: 4KB 512, 2MB 8, 4MB 4
[ 0.088492] Last level dTLB entries: 4KB 512, 2MB 8, 4MB 4
[ 0.088492] tlb_flushall_shift: 5
[ 0.102979] Freeing SMP alternatives memory: 20K (ffffffff819ab000 - ffffffff819b0000)
[ 0.114349] ACPI: Core revision 20131115
[ 0.124351] ACPI: All ACPI Tables successfully acquired
[ 0.130294] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=0 pin2=0
[ 0.175836] smpboot: CPU0: AMD G-T40E Processor (fam: 14, model: 02, stepping: 00)
[ 0.288842] Performance Events: AMD PMU driver.
[ 0.293411] ... version: 0
[ 0.297435] ... bit width: 48
[ 0.301542] ... generic registers: 4
[ 0.305562] ... value mask: 0000ffffffffffff
[ 0.310885] ... max period: 00007fffffffffff
[ 0.316205] ... fixed-purpose events: 0
[ 0.320228] ... event mask: 000000000000000f
[ 0.326282] NMI watchdog: enabled on all CPUs, permanently consumes one hw-PMU counter.
[ 0.334677] x86: Booting SMP configuration:
[ 0.338929] .... node #0, CPUs: #1
[ 0.355889] x86: Booted up 1 node, 2 CPUs
[ 0.360107] smpboot: Total of 2 processors activated (3999.90 BogoMIPS)
[ 0.367893] devtmpfs: initialized
[ 0.383362] NET: Registered protocol family 16
[ 0.388230] cpuidle: using governor ladder
[ 0.392391] cpuidle: using governor menu
[ 0.396551] ACPI: bus type PCI registered
[ 0.400581] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
[ 0.407321] PCI: Using configuration type 1 for base access
[ 0.412901] PCI: Using configuration type 1 for extended access
[ 0.421000] bio: create slab <bio-0> at 0
[ 0.425436] ACPI: Added _OSI(Module Device)
[ 0.429685] ACPI: Added _OSI(Processor Device)
[ 0.434142] ACPI: Added _OSI(3.0 _SCP Extensions)
[ 0.438861] ACPI: Added _OSI(Processor Aggregator Device)
[ 0.447557] ACPI: Executed 2 blocks of module-level executable AML code
[ 0.460544] ACPI: Interpreter enabled
[ 0.464296] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S2_] (20131115/hwxface-580)
[ 0.473616] ACPI: (supports S0 S1 S3 S4 S5)
[ 0.477857] ACPI: Using IOAPIC for interrupt routing
[ 0.482886] HEST: Table parsing has been initialized.
[ 0.488006] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
[ 0.497401] ACPI: No dock devices found.
[ 0.521027] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
[ 0.527248] acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI]
[ 0.535671] acpi PNP0A08:00: _OSC: OS now controls [PCIeHotplug PME AER PCIeCapability]
[ 0.544687] PCI host bridge to bus 0000:00
[ 0.548802] pci_bus 0000:00: root bus resource [bus 00-ff]
[ 0.554299] pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7]
[ 0.560488] pci_bus 0000:00: root bus resource [io 0x0d00-0xffff]
[ 0.566676] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff]
[ 0.573556] pci_bus 0000:00: root bus resource [mem 0xe0000000-0xffffffff]
[ 0.580455] pci 0000:00:00.0: [1022:1510] type 00 class 0x060000
[ 0.580776] pci 0000:00:04.0: [1022:1512] type 01 class 0x060400
[ 0.580888] pci 0000:00:04.0: PME# supported from D0 D3hot D3cold
[ 0.581041] pci 0000:00:04.0: System wakeup disabled by ACPI
[ 0.586808] pci 0000:00:05.0: [1022:1513] type 01 class 0x060400
[ 0.586907] pci 0000:00:05.0: PME# supported from D0 D3hot D3cold
[ 0.587054] pci 0000:00:05.0: System wakeup disabled by ACPI
[ 0.592822] pci 0000:00:06.0: [1022:1514] type 01 class 0x060400
[ 0.592922] pci 0000:00:06.0: PME# supported from D0 D3hot D3cold
[ 0.593070] pci 0000:00:06.0: System wakeup disabled by ACPI
[ 0.598904] pci 0000:00:11.0: [1002:4391] type 00 class 0x010601
[ 0.598939] pci 0000:00:11.0: reg 0x10: [io 0x4010-0x4017]
[ 0.598958] pci 0000:00:11.0: reg 0x14: [io 0x4020-0x4023]
[ 0.598976] pci 0000:00:11.0: reg 0x18: [io 0x4018-0x401f]
[ 0.598994] pci 0000:00:11.0: reg 0x1c: [io 0x4024-0x4027]
[ 0.599011] pci 0000:00:11.0: reg 0x20: [io 0x4000-0x400f]
[ 0.599030] pci 0000:00:11.0: reg 0x24: [mem 0xf7f03000-0xf7f033ff]
[ 0.599351] pci 0000:00:12.0: [1002:4397] type 00 class 0x0c0310
[ 0.599377] pci 0000:00:12.0: reg 0x10: [mem 0xf7f00000-0xf7f00fff]
[ 0.599592] pci 0000:00:12.0: System wakeup disabled by ACPI
[ 0.605455] pci 0000:00:12.2: [1002:4396] type 00 class 0x0c0320
[ 0.605489] pci 0000:00:12.2: reg 0x10: [mem 0xf7f03400-0xf7f034ff]
[ 0.605618] pci 0000:00:12.2: supports D1 D2
[ 0.605624] pci 0000:00:12.2: PME# supported from D0 D1 D2 D3hot
[ 0.605767] pci 0000:00:12.2: System wakeup disabled by ACPI
[ 0.611593] pci 0000:00:13.0: [1002:4397] type 00 class 0x0c0310
[ 0.611618] pci 0000:00:13.0: reg 0x10: [mem 0xf7f01000-0xf7f01fff]
[ 0.611837] pci 0000:00:13.0: System wakeup disabled by ACPI
[ 0.617697] pci 0000:00:13.2: [1002:4396] type 00 class 0x0c0320
[ 0.617730] pci 0000:00:13.2: reg 0x10: [mem 0xf7f03500-0xf7f035ff]
[ 0.617859] pci 0000:00:13.2: supports D1 D2
[ 0.617865] pci 0000:00:13.2: PME# supported from D0 D1 D2 D3hot
[ 0.618007] pci 0000:00:13.2: System wakeup disabled by ACPI
[ 0.623807] pci 0000:00:14.0: [1002:4385] type 00 class 0x0c0500
[ 0.624164] pci 0000:00:14.3: [1002:439d] type 00 class 0x060100
[ 0.624509] pci 0000:00:14.4: [1002:4384] type 01 class 0x060401
[ 0.624698] pci 0000:00:14.4: System wakeup disabled by ACPI
[ 0.630540] pci 0000:00:16.0: [1002:4397] type 00 class 0x0c0310
[ 0.630565] pci 0000:00:16.0: reg 0x10: [mem 0xf7f02000-0xf7f02fff]
[ 0.630780] pci 0000:00:16.0: System wakeup disabled by ACPI
[ 0.636643] pci 0000:00:16.2: [1002:4396] type 00 class 0x0c0320
[ 0.636676] pci 0000:00:16.2: reg 0x10: [mem 0xf7f03600-0xf7f036ff]
[ 0.636812] pci 0000:00:16.2: supports D1 D2
[ 0.636818] pci 0000:00:16.2: PME# supported from D0 D1 D2 D3hot
[ 0.636962] pci 0000:00:16.2: System wakeup disabled by ACPI
[ 0.642781] pci 0000:00:18.0: [1022:1700] type 00 class 0x060000
[ 0.643023] pci 0000:00:18.1: [1022:1701] type 00 class 0x060000
[ 0.643252] pci 0000:00:18.2: [1022:1702] type 00 class 0x060000
[ 0.643487] pci 0000:00:18.3: [1022:1703] type 00 class 0x060000
[ 0.643753] pci 0000:00:18.4: [1022:1704] type 00 class 0x060000
[ 0.643985] pci 0000:00:18.5: [1022:1718] type 00 class 0x060000
[ 0.644213] pci 0000:00:18.6: [1022:1716] type 00 class 0x060000
[ 0.644442] pci 0000:00:18.7: [1022:1719] type 00 class 0x060000
[ 0.644864] pci 0000:01:00.0: [10ec:8168] type 00 class 0x020000
[ 0.644891] pci 0000:01:00.0: reg 0x10: [io 0x1000-0x10ff]
[ 0.644928] pci 0000:01:00.0: reg 0x18: [mem 0xf7a00000-0xf7a00fff 64bit]
[ 0.644954] pci 0000:01:00.0: reg 0x20: [mem 0xf7900000-0xf7903fff 64bit pref]
[ 0.645049] pci 0000:01:00.0: supports D1 D2
[ 0.645055] pci 0000:01:00.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.653046] pci 0000:00:04.0: PCI bridge to [bus 01]
[ 0.658046] pci 0000:00:04.0: bridge window [io 0x1000-0x1fff]
[ 0.658057] pci 0000:00:04.0: bridge window [mem 0xf7a00000-0xf7afffff]
[ 0.658070] pci 0000:00:04.0: bridge window [mem 0xf7900000-0xf79fffff 64bit pref]
[ 0.658257] pci 0000:02:00.0: [10ec:8168] type 00 class 0x020000
[ 0.658289] pci 0000:02:00.0: reg 0x10: [io 0x2000-0x20ff]
[ 0.658327] pci 0000:02:00.0: reg 0x18: [mem 0xf7c00000-0xf7c00fff 64bit]
[ 0.658352] pci 0000:02:00.0: reg 0x20: [mem 0xf7b00000-0xf7b03fff 64bit pref]
[ 0.658455] pci 0000:02:00.0: supports D1 D2
[ 0.658461] pci 0000:02:00.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.665045] pci 0000:00:05.0: PCI bridge to [bus 02]
[ 0.670050] pci 0000:00:05.0: bridge window [io 0x2000-0x2fff]
[ 0.670061] pci 0000:00:05.0: bridge window [mem 0xf7c00000-0xf7cfffff]
[ 0.670074] pci 0000:00:05.0: bridge window [mem 0xf7b00000-0xf7bfffff 64bit pref]
[ 0.670261] pci 0000:03:00.0: [10ec:8168] type 00 class 0x020000
[ 0.670292] pci 0000:03:00.0: reg 0x10: [io 0x3000-0x30ff]
[ 0.670330] pci 0000:03:00.0: reg 0x18: [mem 0xf7e00000-0xf7e00fff 64bit]
[ 0.670356] pci 0000:03:00.0: reg 0x20: [mem 0xf7d00000-0xf7d03fff 64bit pref]
[ 0.670458] pci 0000:03:00.0: supports D1 D2
[ 0.670465] pci 0000:03:00.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.677044] pci 0000:00:06.0: PCI bridge to [bus 03]
[ 0.682043] pci 0000:00:06.0: bridge window [io 0x3000-0x3fff]
[ 0.682053] pci 0000:00:06.0: bridge window [mem 0xf7e00000-0xf7efffff]
[ 0.682067] pci 0000:00:06.0: bridge window [mem 0xf7d00000-0xf7dfffff 64bit pref]
[ 0.682331] pci 0000:00:14.4: PCI bridge to [bus 04] (subtractive decode)
[ 0.689141] pci 0000:00:14.4: bridge window [io 0x0000-0x0cf7] (subtractive decode)
[ 0.689149] pci 0000:00:14.4: bridge window [io 0x0d00-0xffff] (subtractive decode)
[ 0.689156] pci 0000:00:14.4: bridge window [mem 0x000a0000-0x000bffff] (subtractive decode)
[ 0.689162] pci 0000:00:14.4: bridge window [mem 0xe0000000-0xffffffff] (subtractive decode)
[ 0.690065] ACPI: PCI Interrupt Link [INTA] (IRQs 3 4 5 7 *10 11 12 15)
[ 0.697158] ACPI: PCI Interrupt Link [INTB] (IRQs 3 4 5 7 10 *11 12 15)
[ 0.704245] ACPI: PCI Interrupt Link [INTC] (IRQs 3 4 5 7 *10 11 12 15)
[ 0.711323] ACPI: PCI Interrupt Link [INTD] (IRQs 3 4 5 7 10 *11 12 15)
[ 0.718403] ACPI: PCI Interrupt Link [INTE] (IRQs 3 4 5 7 *10 11 12 15)
[ 0.725485] ACPI: PCI Interrupt Link [INTF] (IRQs 9) *11
[ 0.731106] ACPI: PCI Interrupt Link [INTG] (IRQs 3 4 5 7 *10 11 12 15)
[ 0.738187] ACPI: PCI Interrupt Link [INTH] (IRQs 3 4 5 7 10 *11 12 15)
[ 0.745457] ACPI: Enabled 6 GPEs in block 00 to 1F
[ 0.750337] ACPI: \_SB_.PCI0: notify handler is installed
[ 0.750408] Found 1 acpi root devices
[ 0.750897] vgaarb: loaded
[ 0.753861] PCI: Using ACPI for IRQ routing
[ 0.758111] PCI: pci_cache_line_size set to 64 bytes
[ 0.758274] e820: reserve RAM buffer [mem 0x0009fc00-0x0009ffff]
[ 0.758282] e820: reserve RAM buffer [mem 0xdfc55000-0xdfffffff]
[ 0.758287] e820: reserve RAM buffer [mem 0x11f000000-0x11fffffff]
[ 0.758693] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0
[ 0.763691] hpet0: 3 comparators, 32-bit 14.318180 MHz counter
[ 0.771682] Switched to clocksource hpet
[ 0.781740] pnp: PnP ACPI init
[ 0.784937] ACPI: bus type PNP registered
[ 0.789592] pnp 00:00: Plug and Play ACPI device, IDs PNP0b00 (active)
[ 0.789679] pnp 00:01: Plug and Play ACPI device, IDs PNP0800 (active)
[ 0.789719] pnp 00:02: [dma 4]
[ 0.789781] pnp 00:02: Plug and Play ACPI device, IDs PNP0200 (active)
[ 0.789920] pnp 00:03: Plug and Play ACPI device, IDs PNP0c04 (active)
[ 0.790312] pnp: PnP ACPI: found 4 devices
[ 0.794477] ACPI: bus type PNP unregistered
[ 0.814228] pci 0000:00:04.0: PCI bridge to [bus 01]
[ 0.819226] pci 0000:00:04.0: bridge window [io 0x1000-0x1fff]
[ 0.825342] pci 0000:00:04.0: bridge window [mem 0xf7a00000-0xf7afffff]
[ 0.832145] pci 0000:00:04.0: bridge window [mem 0xf7900000-0xf79fffff 64bit pref]
[ 0.839903] pci 0000:00:05.0: PCI bridge to [bus 02]
[ 0.844880] pci 0000:00:05.0: bridge window [io 0x2000-0x2fff]
[ 0.850995] pci 0000:00:05.0: bridge window [mem 0xf7c00000-0xf7cfffff]
[ 0.857795] pci 0000:00:05.0: bridge window [mem 0xf7b00000-0xf7bfffff 64bit pref]
[ 0.865555] pci 0000:00:06.0: PCI bridge to [bus 03]
[ 0.870535] pci 0000:00:06.0: bridge window [io 0x3000-0x3fff]
[ 0.876646] pci 0000:00:06.0: bridge window [mem 0xf7e00000-0xf7efffff]
[ 0.883448] pci 0000:00:06.0: bridge window [mem 0xf7d00000-0xf7dfffff 64bit pref]
[ 0.891207] pci 0000:00:14.4: PCI bridge to [bus 04]
[ 0.896204] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7]
[ 0.896211] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff]
[ 0.896218] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff]
[ 0.896224] pci_bus 0000:00: resource 7 [mem 0xe0000000-0xffffffff]
[ 0.896230] pci_bus 0000:01: resource 0 [io 0x1000-0x1fff]
[ 0.896237] pci_bus 0000:01: resource 1 [mem 0xf7a00000-0xf7afffff]
[ 0.896243] pci_bus 0000:01: resource 2 [mem 0xf7900000-0xf79fffff 64bit pref]
[ 0.896249] pci_bus 0000:02: resource 0 [io 0x2000-0x2fff]
[ 0.896256] pci_bus 0000:02: resource 1 [mem 0xf7c00000-0xf7cfffff]
[ 0.896262] pci_bus 0000:02: resource 2 [mem 0xf7b00000-0xf7bfffff 64bit pref]
[ 0.896269] pci_bus 0000:03: resource 0 [io 0x3000-0x3fff]
[ 0.896275] pci_bus 0000:03: resource 1 [mem 0xf7e00000-0xf7efffff]
[ 0.896281] pci_bus 0000:03: resource 2 [mem 0xf7d00000-0xf7dfffff 64bit pref]
[ 0.896288] pci_bus 0000:04: resource 4 [io 0x0000-0x0cf7]
[ 0.896294] pci_bus 0000:04: resource 5 [io 0x0d00-0xffff]
[ 0.896300] pci_bus 0000:04: resource 6 [mem 0x000a0000-0x000bffff]
[ 0.896306] pci_bus 0000:04: resource 7 [mem 0xe0000000-0xffffffff]
[ 0.896498] NET: Registered protocol family 2
[ 0.901513] TCP established hash table entries: 32768 (order: 6, 262144 bytes)
[ 0.909101] TCP bind hash table entries: 32768 (order: 7, 524288 bytes)
[ 0.916168] TCP: Hash tables configured (established 32768 bind 32768)
[ 0.922915] TCP: reno registered
[ 0.926249] UDP hash table entries: 2048 (order: 4, 65536 bytes)
[ 0.932345] UDP-Lite hash table entries: 2048 (order: 4, 65536 bytes)
[ 0.939342] NET: Registered protocol family 1
[ 0.947285] PCI: CLS 64 bytes, default 64
[ 0.947439] Unpacking initramfs...
[ 6.484593] Freeing initrd memory: 16588K (ffff88007efcc000 - ffff88007ffff000)
[ 6.491990] PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
[ 6.498447] software IO TLB [mem 0xdbc55000-0xdfc55000] (64MB) mapped at [ffff8800dbc55000-ffff8800dfc54fff]
[ 6.508741] LVT offset 0 assigned for vector 0x400
[ 6.513759] perf: AMD IBS detected (0x000000ff)
[ 6.518602] microcode: CPU0: patch_level=0x05000119
[ 6.523503] microcode: CPU1: patch_level=0x05000119
[ 6.528700] microcode: Microcode Update Driver: v2.00 <tigran@aivazian.fsnet.co.uk>, Peter Oruba
[ 6.537554] Scanning for low memory corruption every 60 seconds
[ 6.544510] audit: initializing netlink socket (disabled)
[ 6.549971] type=2000 audit(1398459568.344:1): initialized
[ 6.594833] HugeTLB registered 2 MB page size, pre-allocated 0 pages
[ 6.602881] VFS: Disk quotas dquot_6.5.2
[ 6.606945] Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[ 6.613682] squashfs: version 4.0 (2009/01/31) Phillip Lougher
[ 6.620011] aufs 3.13-20140127
[ 6.623083] msgmni has been set to 7884
[ 6.628421] alg: No test for stdrng (krng)
[ 6.632684] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252)
[ 6.640304] io scheduler noop registered
[ 6.644252] io scheduler deadline registered
[ 6.648652] io scheduler cfq registered (default)
[ 6.654000] pcieport 0000:00:04.0: irq 40 for MSI/MSI-X
[ 6.654410] pcieport 0000:00:05.0: irq 41 for MSI/MSI-X
[ 6.654791] pcieport 0000:00:06.0: irq 42 for MSI/MSI-X
[ 6.654973] pcieport 0000:00:04.0: Signaling PME through PCIe PME interrupt
[ 6.661992] pci 0000:01:00.0: Signaling PME through PCIe PME interrupt
[ 6.668535] pcie_pme 0000:00:04.0:pcie01: service driver pcie_pme loaded
[ 6.668578] pcieport 0000:00:05.0: Signaling PME through PCIe PME interrupt
[ 6.675598] pci 0000:02:00.0: Signaling PME through PCIe PME interrupt
[ 6.682141] pcie_pme 0000:00:05.0:pcie01: service driver pcie_pme loaded
[ 6.682186] pcieport 0000:00:06.0: Signaling PME through PCIe PME interrupt
[ 6.689205] pci 0000:03:00.0: Signaling PME through PCIe PME interrupt
[ 6.695758] pcie_pme 0000:00:06.0:pcie01: service driver pcie_pme loaded
[ 6.695803] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[ 6.701475] pciehp: PCI Express Hot Plug Controller Driver version: 0.4
[ 6.708330] GHES: Failed to enable APEI firmware first mode.
[ 6.714337] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
[ 6.741364] serial8250: ttyS0 at I/O 0x3f8 (irq = 4, base_baud = 115200) is a 16550A
[ 6.769929] serial8250: ttyS1 at I/O 0x2f8 (irq = 3, base_baud = 115200) is a 16550A
[ 6.778935] Linux agpgart interface v0.103
[ 6.783361] i8042: PNP: No PS/2 controller found. Probing ports directly.
[ 7.755837] tsc: Refined TSC clocksource calibration: 999.999 MHz
[ 8.714419] i8042: No controller found
[ 8.718733] mousedev: PS/2 mouse device common for all mice
[ 8.724447] rtc_cmos 00:00: RTC can wake from S4
[ 8.729421] rtc_cmos 00:00: rtc core: registered rtc_cmos as rtc0
[ 8.735626] rtc_cmos 00:00: alarms up to one day, 114 bytes nvram, hpet irqs
[ 8.742849] AMD IOMMUv2 driver by Joerg Roedel <joerg.roedel@amd.com>
[ 8.749349] AMD IOMMUv2 functionality not available on this system
[ 8.755562] Switched to clocksource tsc
[ 8.759552] TCP: cubic registered
[ 8.763024] NET: Registered protocol family 10
[ 8.768129] mip6: Mobile IPv6
[ 8.771154] NET: Registered protocol family 17
[ 8.775623] mpls_gso: MPLS GSO support
[ 8.780026] registered taskstats version 1
[ 8.785884] rtc_cmos 00:00: setting system clock to 2014-04-25 20:59:31 UTC (1398459571)
[ 8.794134] PM: Hibernation image not present or could not be loaded.
[ 8.797176] Freeing unused kernel memory: 1004K (ffffffff818b0000 - ffffffff819ab000)
[ 8.805092] Write protecting the kernel read-only data: 8192k
[ 8.820598] Freeing unused kernel memory: 1168K (ffff8800014dc000 - ffff880001600000)
[ 8.831238] Freeing unused kernel memory: 332K (ffff8800017ad000 - ffff880001800000)
[ 8.895898] systemd-udevd[65]: starting version 204
[ 8.968288] SCSI subsystem initialized
[ 8.975555] ACPI: bus type USB registered
[ 8.979986] input: Power Button as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input0
[ 8.989554] r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded
[ 8.995837] usbcore: registered new interface driver usbfs
[ 8.996110] r8169 0000:01:00.0: irq 43 for MSI/MSI-X
[ 8.996543] r8169 0000:01:00.0 eth0: RTL8168e/8111e at 0xffffc90000612000, 00:0d:b9:37:e5:20, XID 0c200000 IRQ 43
[ 8.996548] r8169 0000:01:00.0 eth0: jumbo features [frames: 9200 bytes, tx checksumming: ko]
[ 8.996609] r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded
[ 8.996909] r8169 0000:02:00.0: irq 44 for MSI/MSI-X
[ 8.997251] r8169 0000:02:00.0 eth1: RTL8168e/8111e at 0xffffc900006fa000, 00:0d:b9:37:e5:21, XID 0c200000 IRQ 44
[ 8.997255] r8169 0000:02:00.0 eth1: jumbo features [frames: 9200 bytes, tx checksumming: ko]
[ 9.044594] r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded
[ 9.050374] usbcore: registered new interface driver hub
[ 9.051137] r8169 0000:03:00.0: irq 45 for MSI/MSI-X
[ 9.051579] r8169 0000:03:00.0 eth2: RTL8168e/8111e at 0xffffc9000073a000, 00:0d:b9:37:e5:22, XID 0c200000 IRQ 45
[ 9.051584] r8169 0000:03:00.0 eth2: jumbo features [frames: 9200 bytes, tx checksumming: ko]
[ 9.075535] ACPI: Power Button [PWRB]
[ 9.076532] libata version 3.00 loaded.
[ 9.081967] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input1
[ 9.099887] ACPI: Power Button [PWRF]
[ 9.115323] ahci 0000:00:11.0: version 3.0
[ 9.116092] ahci 0000:00:11.0: AHCI 0001.0200 32 slots 6 ports 6 Gbps 0x3f impl SATA mode
[ 9.124297] ahci 0000:00:11.0: flags: 64bit ncq sntf ilck led clo pmp pio slum part
[ 9.147176] usbcore: registered new device driver usb
[ 9.158866] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 9.166565] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[ 9.173434] ohci-pci: OHCI PCI platform driver
[ 9.177983] ehci-pci: EHCI PCI platform driver
[ 9.193597] scsi0 : ahci
[ 9.197943] scsi1 : ahci
[ 9.204892] scsi2 : ahci
[ 9.207807] scsi3 : ahci
[ 9.211942] scsi4 : ahci
[ 9.215361] scsi5 : ahci
[ 9.219135] ata1: SATA max UDMA/133 abar m1024@0xf7f03000 port 0xf7f03100 irq 19
[ 9.226570] ata2: SATA max UDMA/133 abar m1024@0xf7f03000 port 0xf7f03180 irq 19
[ 9.233985] ata3: SATA max UDMA/133 abar m1024@0xf7f03000 port 0xf7f03200 irq 19
[ 9.241394] ata4: SATA max UDMA/133 abar m1024@0xf7f03000 port 0xf7f03280 irq 19
[ 9.248802] ata5: SATA max UDMA/133 abar m1024@0xf7f03000 port 0xf7f03300 irq 19
[ 9.256212] ata6: SATA max UDMA/133 abar m1024@0xf7f03000 port 0xf7f03380 irq 19
[ 9.264880] QUIRK: Enable AMD PLL fix
[ 9.264964] ohci-pci 0000:00:12.0: OHCI PCI host controller
[ 9.271936] ohci-pci 0000:00:12.0: new USB bus registered, assigned bus number 1
[ 9.279874] ohci-pci 0000:00:12.0: irq 18, io mem 0xf7f00000
[ 9.344056] usb usb1: New USB device found, idVendor=1d6b, idProduct=0001
[ 9.350913] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 9.358146] usb usb1: Product: OHCI PCI host controller
[ 9.363386] usb usb1: Manufacturer: Linux 3.13-1-grml-amd64 ohci_hcd
[ 9.369748] usb usb1: SerialNumber: 0000:00:12.0
[ 9.374825] hub 1-0:1.0: USB hub found
[ 9.378658] hub 1-0:1.0: 5 ports detected
[ 9.383782] ehci-pci 0000:00:12.2: EHCI Host Controller
[ 9.389038] ehci-pci 0000:00:12.2: new USB bus registered, assigned bus number 2
[ 9.396448] ehci-pci 0000:00:12.2: applying AMD SB700/SB800/Hudson-2/3 EHCI dummy qh workaround
[ 9.405166] ehci-pci 0000:00:12.2: debug port 1
[ 9.409795] ehci-pci 0000:00:12.2: irq 17, io mem 0xf7f03400
[ 9.423726] ehci-pci 0000:00:12.2: USB 2.0 started, EHCI 1.00
[ 9.429578] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002
[ 9.436422] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 9.443648] usb usb2: Product: EHCI Host Controller
[ 9.448537] usb usb2: Manufacturer: Linux 3.13-1-grml-amd64 ehci_hcd
[ 9.454896] usb usb2: SerialNumber: 0000:00:12.2
[ 9.459927] hub 2-0:1.0: USB hub found
[ 9.463762] hub 2-0:1.0: 5 ports detected
[ 9.532136] hub 1-0:1.0: USB hub found
[ 9.536037] hub 1-0:1.0: 5 ports detected
[ 9.540783] ehci-pci 0000:00:13.2: EHCI Host Controller
[ 9.546037] ehci-pci 0000:00:13.2: new USB bus registered, assigned bus number 3
[ 9.553467] ehci-pci 0000:00:13.2: applying AMD SB700/SB800/Hudson-2/3 EHCI dummy qh workaround
[ 9.562191] ehci-pci 0000:00:13.2: debug port 1
[ 9.566806] ehci-pci 0000:00:13.2: irq 17, io mem 0xf7f03500
[ 9.583969] ehci-pci 0000:00:13.2: USB 2.0 started, EHCI 1.00
[ 9.583989] ata4: SATA link down (SStatus 0 SControl 300)
[ 9.584064] ata1: SATA link down (SStatus 0 SControl 300)
[ 9.584136] ata6: SATA link down (SStatus 0 SControl 300)
[ 9.587820] ata3: SATA link down (SStatus 0 SControl 300)
[ 9.611388] ata5: SATA link down (SStatus 0 SControl 300)
[ 9.616859] ata2: SATA link down (SStatus 0 SControl 300)
[ 9.616951] usb usb3: New USB device found, idVendor=1d6b, idProduct=0002
[ 9.616956] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 9.616960] usb usb3: Product: EHCI Host Controller
[ 9.616963] usb usb3: Manufacturer: Linux 3.13-1-grml-amd64 ehci_hcd
[ 9.616967] usb usb3: SerialNumber: 0000:00:13.2
[ 9.617331] hub 3-0:1.0: USB hub found
[ 9.617351] hub 3-0:1.0: 5 ports detected
[ 9.617994] ehci-pci 0000:00:16.2: EHCI Host Controller
[ 9.618008] ehci-pci 0000:00:16.2: new USB bus registered, assigned bus number 4
[ 9.618019] ehci-pci 0000:00:16.2: applying AMD SB700/SB800/Hudson-2/3 EHCI dummy qh workaround
[ 9.618042] ehci-pci 0000:00:16.2: debug port 1
[ 9.618114] ehci-pci 0000:00:16.2: irq 17, io mem 0xf7f03600
[ 9.627817] ehci-pci 0000:00:16.2: USB 2.0 started, EHCI 1.00
[ 9.627965] usb usb4: New USB device found, idVendor=1d6b, idProduct=0002
[ 9.627969] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 9.627973] usb usb4: Product: EHCI Host Controller
[ 9.627977] usb usb4: Manufacturer: Linux 3.13-1-grml-amd64 ehci_hcd
[ 9.627980] usb usb4: SerialNumber: 0000:00:16.2
[ 9.628556] hub 4-0:1.0: USB hub found
[ 9.628575] hub 4-0:1.0: 4 ports detected
[ 9.629406] ohci-pci 0000:00:13.0: OHCI PCI host controller
[ 9.629422] ohci-pci 0000:00:13.0: new USB bus registered, assigned bus number 5
[ 9.629465] ohci-pci 0000:00:13.0: irq 18, io mem 0xf7f01000
[ 9.762140] usb usb5: New USB device found, idVendor=1d6b, idProduct=0001
[ 9.769013] usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 9.776248] usb usb5: Product: OHCI PCI host controller
[ 9.781484] usb usb5: Manufacturer: Linux 3.13-1-grml-amd64 ohci_hcd
[ 9.787847] usb usb5: SerialNumber: 0000:00:13.0
[ 9.792907] hub 5-0:1.0: USB hub found
[ 9.796819] hub 5-0:1.0: 5 ports detected
[ 9.801668] ohci-pci 0000:00:16.0: OHCI PCI host controller
[ 9.807269] ohci-pci 0000:00:16.0: new USB bus registered, assigned bus number 6
[ 9.814713] ohci-pci 0000:00:16.0: irq 18, io mem 0xf7f02000
[ 9.863910] usb 2-1: new high-speed USB device number 2 using ehci-pci
[ 9.879774] usb usb6: New USB device found, idVendor=1d6b, idProduct=0001
[ 9.886571] usb usb6: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 9.893807] usb usb6: Product: OHCI PCI host controller
[ 9.899043] usb usb6: Manufacturer: Linux 3.13-1-grml-amd64 ohci_hcd
[ 9.905412] usb usb6: SerialNumber: 0000:00:16.0
[ 9.910648] hub 6-0:1.0: USB hub found
[ 9.914514] hub 6-0:1.0: 4 ports detected
[ 10.001060] usb 2-1: New USB device found, idVendor=0457, idProduct=0151
[ 10.007813] usb 2-1: New USB device strings: Mfr=0, Product=2, SerialNumber=3
[ 10.015005] usb 2-1: Product: USB Mass Storage Device
[ 10.020072] usb 2-1: SerialNumber: 95b13507ca411e
[ 10.033182] usb-storage 2-1:1.0: USB Mass Storage device detected
[ 10.039535] usb-storage 2-1:1.0: Quirks match for vid 0457 pid 0151: 80
[ 10.046556] scsi6 : usb-storage 2-1:1.0
[ 10.050752] usbcore: registered new interface driver usb-storage
[ 10.085750] device-mapper: uevent: version 1.0.3
[ 10.090741] device-mapper: ioctl: 4.27.0-ioctl (2013-10-30) initialised: dm-devel@redhat.com
[ 10.135780] usb 4-1: new high-speed USB device number 2 using ehci-pci
[ 10.274822] usb 4-1: New USB device found, idVendor=058f, idProduct=6366
[ 10.281571] usb 4-1: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[ 10.288768] usb 4-1: Product: Flash Card Reader/Writer
[ 10.293931] usb 4-1: Manufacturer: Generic
[ 10.298046] usb 4-1: SerialNumber: 058F63666485
[ 10.303744] usb-storage 4-1:1.0: USB Mass Storage device detected
[ 10.310144] scsi7 : usb-storage 4-1:1.0
[ 11.050910] scsi 6:0:0:0: Direct-Access JetFlash TS4GJF2A/120 0.00 PQ: 0 ANSI: 2
[ 11.074398] sd 6:0:0:0: [sda] 8028160 512-byte logical blocks: (4.11 GB/3.82 GiB)
[ 11.082996] sd 6:0:0:0: [sda] Write Protect is off
[ 11.087816] sd 6:0:0:0: [sda] Mode Sense: 00 00 00 00
[ 11.089410] sd 6:0:0:0: [sda] Asking for cache data failed
[ 11.094944] sd 6:0:0:0: [sda] Assuming drive cache: write through
[ 11.104547] sd 6:0:0:0: [sda] Asking for cache data failed
[ 11.110084] sd 6:0:0:0: [sda] Assuming drive cache: write through
[ 11.119471] sda: sda1
[ 11.125425] sd 6:0:0:0: [sda] Asking for cache data failed
[ 11.130967] sd 6:0:0:0: [sda] Assuming drive cache: write through
[ 11.137130] sd 6:0:0:0: [sda] Attached SCSI removable disk
[ 11.147615] sd 6:0:0:0: Attached scsi generic sg0 type 0
[ 11.313147] scsi 7:0:0:0: Direct-Access Multiple Card Reader 1.00 PQ: 0 ANSI: 4
[ 11.324810] sd 7:0:0:0: Attached scsi generic sg1 type 0
[ 11.333417] sd 7:0:0:0: [sdb] Attached SCSI removable disk
[ 11.558015] FAT-fs (sda1): utf8 is not a recommended IO charset for FAT filesystems, filesystem will be case sensitive!
[ 11.822329] loop: module loaded
[ 11.914944] loop0: unknown partition table
[ 13.531862] random: nonblocking pool is initialized
[ 15.470693] FS-Cache: Loaded
[ 15.507347] 9pnet: Installing 9P2000 support
[ 15.544774] 9p: Installing v9fs 9p2000 file system support
[ 15.550431] FS-Cache: Netfs '9p' registered for caching
[ 21.065172] systemd-udevd[806]: starting version 204
[ 21.964550] ACPI Warning: 0x0000000000000b00-0x0000000000000b07 SystemIO conflicts with Region \SMB0 1 (20131115/utaddress-251)
[ 21.976115] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[ 22.025045] ACPI: acpi_idle registered with cpuidle
[ 22.048125] input: PC Speaker as /devices/platform/pcspkr/input/input2
[ 22.116232] sp5100_tco: SP5100/SB800 TCO WatchDog Timer Driver v0.05
[ 22.133246] sp5100_tco: PCI Revision ID: 0x42
[ 22.150497] sp5100_tco: Using 0xfed80b00 for watchdog MMIO address
[ 22.156841] sp5100_tco: Last reboot was not triggered by watchdog.
[ 22.163202] acpi-cpufreq: overriding BIOS provided _PSD data
[ 22.175192] sp5100_tco: initialized (0xffffc90000700b00). heartbeat=60 sec (nowayout=0)
[ 22.483858] kvm: Nested Virtualization enabled
[ 22.496554] kvm: Nested Paging enabled
[ 25.991622] r8169 0000:03:00.0 eth2: link down
[ 25.996617] r8169 0000:03:00.0 eth2: link down
[ 26.001231] IPv6: ADDRCONF(NETDEV_UP): eth2: link is not ready
[ 26.152725] r8169 0000:01:00.0 eth0: link down
[ 26.158485] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 26.320833] r8169 0000:02:00.0 eth1: link down
[ 26.325417] IPv6: ADDRCONF(NETDEV_UP): eth1: link is not ready
[ 26.358736] RPC: Registered named UNIX socket transport module.
[ 26.364768] RPC: Registered udp transport module.
[ 26.369539] RPC: Registered tcp transport module.
[ 26.374256] RPC: Registered tcp NFSv4.1 backchannel transport module.
[ 26.487056] FS-Cache: Netfs 'nfs' registered for caching
[ 26.678861] Installing knfsd (copyright (C) 1996 okir@monad.swb.de).
[ 28.284209] r8169 0000:03:00.0 eth2: link up
[ 28.288675] IPv6: ADDRCONF(NETDEV_CHANGE): eth2: link becomes ready
[ 32.856584] fuse init (API version 7.22)
[ 32.941157] ipmi message handler version 39.2
[ 101.681597] type=1006 audit(1433440101.713:2): pid=2995 uid=0 old auid=4294967295 new auid=0 old ses=4294967295 new ses=1 res=1
[ 131.544016] type=1006 audit(1433440131.577:3): pid=3002 uid=0 old auid=4294967295 new auid=0 old ses=4294967295 new ses=2 res=1
[ 169.167192] type=1006 audit(1433440169.197:4): pid=3011 uid=0 old auid=4294967295 new auid=0 old ses=4294967295 new ses=3 res=1
[ 169.343885] type=1006 audit(1433440169.377:5): pid=3016 uid=0 old auid=4294967295 new auid=0 old ses=4294967295 new ses=4 res=1
[ 169.527342] type=1006 audit(1433440169.557:6): pid=3021 uid=0 old auid=4294967295 new auid=0 old ses=4294967295 new ses=5 res=1
[ 169.705801] type=1006 audit(1433440169.737:7): pid=3026 uid=0 old auid=4294967295 new auid=0 old ses=4294967295 new ses=6 res=1
[ 274.919471] type=1006 audit(1433440274.949:8): pid=3039 uid=0 old auid=4294967295 new auid=0 old ses=4294967295 new ses=7 res=1
[ 275.091476] type=1006 audit(1433440275.121:9): pid=3044 uid=0 old auid=4294967295 new auid=0 old ses=4294967295 new ses=8 res=1
[ 275.270971] type=1006 audit(1433440275.301:10): pid=3049 uid=0 old auid=4294967295 new auid=0 old ses=4294967295 new ses=9 res=1
[ 275.448570] type=1006 audit(1433440275.481:11): pid=3054 uid=0 old auid=4294967295 new auid=0 old ses=4294967295 new ses=10 res=1