blob: 1a6b58b59d85461d6455b6dc6d481da27c60a710 [file] [log] [blame]
[ 0.000000] Linux version 4.9.0-2-amd64 (debian-kernel@lists.debian.org) (gcc version 6.3.0 20170321 (Debian 6.3.0-11) ) #1 SMP Debian 4.9.18-1 (2017-03-30)
[ 0.000000] Command line: BOOT_IMAGE=/vmlinuz-4.9.0-2-amd64 root=UUID=f545d1ea-3103-4100-8a85-54db5c9634ad ro quiet iomem=relaxed
[ 0.000000] x86/fpu: Supporting XSAVE feature 0x001: 'x87 floating point registers'
[ 0.000000] x86/fpu: Supporting XSAVE feature 0x002: 'SSE registers'
[ 0.000000] x86/fpu: Supporting XSAVE feature 0x004: 'AVX registers'
[ 0.000000] x86/fpu: xstate_offset[2]: 576, xstate_sizes[2]: 256
[ 0.000000] x86/fpu: Enabled xstate features 0x7, context size is 832 bytes, using 'standard' format.
[ 0.000000] x86/fpu: Using 'eager' FPU context switches.
[ 0.000000] e820: BIOS-provided physical RAM map:
[ 0.000000] BIOS-e820: [mem 0x0000000000000000-0x0000000000000fff] type 16
[ 0.000000] BIOS-e820: [mem 0x0000000000001000-0x000000000009ffff] usable
[ 0.000000] BIOS-e820: [mem 0x00000000000a0000-0x00000000000fffff] reserved
[ 0.000000] BIOS-e820: [mem 0x0000000000100000-0x00000000bff0efff] usable
[ 0.000000] BIOS-e820: [mem 0x00000000bff0f000-0x00000000bfffffff] type 16
[ 0.000000] BIOS-e820: [mem 0x00000000c0000000-0x00000000c29fffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000f8000000-0x00000000fbffffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fed40000-0x00000000fed44fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fed90000-0x00000000fed91fff] reserved
[ 0.000000] BIOS-e820: [mem 0x0000000100000000-0x000000043b5fffff] usable
[ 0.000000] NX (Execute Disable) protection: active
[ 0.000000] SMBIOS 2.7 present.
[ 0.000000] DMI: LENOVO 23255A9/23255A9, BIOS CBET4000 4.6-27-gec10c9a11c 05/03/2017
[ 0.000000] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
[ 0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable
[ 0.000000] e820: last_pfn = 0x43b600 max_arch_pfn = 0x400000000
[ 0.000000] MTRR default type: write-back
[ 0.000000] MTRR fixed ranges enabled:
[ 0.000000] 00000-9FFFF write-back
[ 0.000000] A0000-BFFFF uncachable
[ 0.000000] C0000-FFFFF write-back
[ 0.000000] MTRR variable ranges enabled:
[ 0.000000] 0 base 0C0000000 mask FE0000000 uncachable
[ 0.000000] 1 base 0E0000000 mask FF0000000 write-combining
[ 0.000000] 2 base 0F0000000 mask FF0000000 uncachable
[ 0.000000] 3 disabled
[ 0.000000] 4 disabled
[ 0.000000] 5 disabled
[ 0.000000] 6 disabled
[ 0.000000] 7 disabled
[ 0.000000] 8 disabled
[ 0.000000] 9 disabled
[ 0.000000] x86/PAT: Configuration [0-7]: WB WC UC- UC WB WC UC- WT
[ 0.000000] e820: last_pfn = 0xbff0f max_arch_pfn = 0x400000000
[ 0.000000] Base memory trampoline at [ffff97df80099000] 99000 size 24576
[ 0.000000] BRK [0x11df2b000, 0x11df2bfff] PGTABLE
[ 0.000000] BRK [0x11df2c000, 0x11df2cfff] PGTABLE
[ 0.000000] BRK [0x11df2d000, 0x11df2dfff] PGTABLE
[ 0.000000] BRK [0x11df2e000, 0x11df2efff] PGTABLE
[ 0.000000] BRK [0x11df2f000, 0x11df2ffff] PGTABLE
[ 0.000000] BRK [0x11df30000, 0x11df30fff] PGTABLE
[ 0.000000] BRK [0x11df31000, 0x11df31fff] PGTABLE
[ 0.000000] BRK [0x11df32000, 0x11df32fff] PGTABLE
[ 0.000000] RAMDISK: [mem 0x35829000-0x36c0bfff]
[ 0.000000] ACPI: Early table checksum verification disabled
[ 0.000000] ACPI: RSDP 0x00000000000F0000 000024 (v02 CORE )
[ 0.000000] ACPI: XSDT 0x00000000BFF230E0 00005C (v01 CORE COREBOOT 00000000 CORE 00000000)
[ 0.000000] ACPI: FACP 0x00000000BFF266F0 0000F4 (v04 CORE COREBOOT 00000000 CORE 00000000)
[ 0.000000] ACPI: DSDT 0x00000000BFF23280 00346D (v02 COREv4 COREBOOT 20110725 INTL 20161222)
[ 0.000000] ACPI: FACS 0x00000000BFF23240 000040
[ 0.000000] ACPI: FACS 0x00000000BFF23240 000040
[ 0.000000] ACPI: SSDT 0x00000000BFF267F0 00189A (v02 CORE COREBOOT 0000002A CORE 0000002A)
[ 0.000000] ACPI: MCFG 0x00000000BFF28090 00003C (v01 CORE COREBOOT 00000000 CORE 00000000)
[ 0.000000] ACPI: TCPA 0x00000000BFF280D0 000032 (v02 CORE COREBOOT 00000000 CORE 00000000)
[ 0.000000] ACPI: APIC 0x00000000BFF28110 00006C (v01 CORE COREBOOT 00000000 CORE 00000000)
[ 0.000000] ACPI: DMAR 0x00000000BFF28180 0000A8 (v01 CORE COREBOOT 00000000 CORE 00000000)
[ 0.000000] ACPI: HPET 0x00000000BFF28230 000038 (v01 CORE COREBOOT 00000000 CORE 00000000)
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] No NUMA configuration found
[ 0.000000] Faking a node at [mem 0x0000000000000000-0x000000043b5fffff]
[ 0.000000] NODE_DATA(0) allocated [mem 0x43b5ef000-0x43b5f3fff]
[ 0.000000] Zone ranges:
[ 0.000000] DMA [mem 0x0000000000001000-0x0000000000ffffff]
[ 0.000000] DMA32 [mem 0x0000000001000000-0x00000000ffffffff]
[ 0.000000] Normal [mem 0x0000000100000000-0x000000043b5fffff]
[ 0.000000] Device empty
[ 0.000000] Movable zone start for each node
[ 0.000000] Early memory node ranges
[ 0.000000] node 0: [mem 0x0000000000001000-0x000000000009ffff]
[ 0.000000] node 0: [mem 0x0000000000100000-0x00000000bff0efff]
[ 0.000000] node 0: [mem 0x0000000100000000-0x000000043b5fffff]
[ 0.000000] Initmem setup node 0 [mem 0x0000000000001000-0x000000043b5fffff]
[ 0.000000] On node 0 totalpages: 4175022
[ 0.000000] DMA zone: 64 pages used for memmap
[ 0.000000] DMA zone: 22 pages reserved
[ 0.000000] DMA zone: 3999 pages, LIFO batch:0
[ 0.000000] DMA32 zone: 12221 pages used for memmap
[ 0.000000] DMA32 zone: 782095 pages, LIFO batch:31
[ 0.000000] Normal zone: 52952 pages used for memmap
[ 0.000000] Normal zone: 3388928 pages, LIFO batch:31
[ 0.000000] Reserving Intel graphics memory at 0x00000000c0a00000-0x00000000c29fffff
[ 0.000000] ACPI: PM-Timer IO Port: 0x508
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-23
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[ 0.000000] ACPI: IRQ0 used by override.
[ 0.000000] ACPI: IRQ9 used by override.
[ 0.000000] Using ACPI (MADT) for SMP configuration information
[ 0.000000] ACPI: HPET id: 0x8086a701 base: 0xfed00000
[ 0.000000] smpboot: Allowing 4 CPUs, 0 hotplug CPUs
[ 0.000000] PM: Registered nosave memory: [mem 0x00000000-0x00000fff]
[ 0.000000] PM: Registered nosave memory: [mem 0x000a0000-0x000fffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xbff0f000-0xbfffffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xc0000000-0xc29fffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xc2a00000-0xf7ffffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xf8000000-0xfbffffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfc000000-0xfed3ffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfed40000-0xfed44fff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfed45000-0xfed8ffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfed90000-0xfed91fff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfed92000-0xffffffff]
[ 0.000000] e820: [mem 0xc2a00000-0xf7ffffff] available for PCI devices
[ 0.000000] Booting paravirtualized kernel on bare hardware
[ 0.000000] clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645519600211568 ns
[ 0.000000] setup_percpu: NR_CPUS:512 nr_cpumask_bits:512 nr_cpu_ids:4 nr_node_ids:1
[ 0.000000] percpu: Embedded 35 pages/cpu @ffff97e3bb200000 s103384 r8192 d31784 u524288
[ 0.000000] pcpu-alloc: s103384 r8192 d31784 u524288 alloc=1*2097152
[ 0.000000] pcpu-alloc: [0] 0 1 2 3
[ 0.000000] Built 1 zonelists in Node order, mobility grouping on. Total pages: 4109763
[ 0.000000] Policy zone: Normal
[ 0.000000] Kernel command line: BOOT_IMAGE=/vmlinuz-4.9.0-2-amd64 root=UUID=f545d1ea-3103-4100-8a85-54db5c9634ad ro quiet iomem=relaxed
[ 0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes)
[ 0.000000] Calgary: detecting Calgary via BIOS EBDA area
[ 0.000000] Calgary: Unable to locate Rio Grande table in EBDA - bailing!
[ 0.000000] Memory: 16335268K/16700088K available (6143K kernel code, 1129K rwdata, 2844K rodata, 1392K init, 684K bss, 364820K reserved, 0K cma-reserved)
[ 0.000000] Hierarchical RCU implementation.
[ 0.000000] Build-time adjustment of leaf fanout to 64.
[ 0.000000] RCU restricting CPUs from NR_CPUS=512 to nr_cpu_ids=4.
[ 0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=64, nr_cpu_ids=4
[ 0.000000] NR_IRQS:33024 nr_irqs:456 16
[ 0.000000] Console: colour dummy device 80x25
[ 0.000000] console [tty0] enabled
[ 0.000000] clocksource: hpet: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 133484882848 ns
[ 0.000000] hpet clockevent registered
[ 0.000000] tsc: Fast TSC calibration using PIT
[ 0.000000] tsc: Detected 2593.987 MHz processor
[ 0.000024] Calibrating delay loop (skipped), value calculated using timer frequency.. 5187.97 BogoMIPS (lpj=10375948)
[ 0.000026] pid_max: default: 32768 minimum: 301
[ 0.000039] ACPI: Core revision 20160831
[ 0.002570] ACPI: 2 ACPI AML tables successfully acquired and loaded
[ 0.002611] Security Framework initialized
[ 0.002612] Yama: disabled by default; enable with sysctl kernel.yama.*
[ 0.002617] AppArmor: AppArmor disabled by boot time parameter
[ 0.003346] Dentry cache hash table entries: 2097152 (order: 12, 16777216 bytes)
[ 0.007074] Inode-cache hash table entries: 1048576 (order: 11, 8388608 bytes)
[ 0.008776] Mount-cache hash table entries: 32768 (order: 6, 262144 bytes)
[ 0.008789] Mountpoint-cache hash table entries: 32768 (order: 6, 262144 bytes)
[ 0.009076] CPU: Physical Processor ID: 0
[ 0.009076] CPU: Processor Core ID: 0
[ 0.009082] mce: CPU supports 7 MCE banks
[ 0.009091] CPU0: Thermal monitoring enabled (TM1)
[ 0.009099] process: using mwait in idle threads
[ 0.009101] Last level iTLB entries: 4KB 512, 2MB 8, 4MB 8
[ 0.009102] Last level dTLB entries: 4KB 512, 2MB 32, 4MB 32, 1GB 0
[ 0.009489] Freeing SMP alternatives memory: 24K (ffffffffa3478000 - ffffffffa347e000)
[ 0.011587] ftrace: allocating 25004 entries in 98 pages
[ 0.022252] smpboot: Max logical packages: 2
[ 0.022256] DMAR: Host address width 36
[ 0.022257] DMAR: DRHD base: 0x000000fed90000 flags: 0x0
[ 0.022265] DMAR: dmar0: reg_base_addr fed90000 ver 1:0 cap c0000020e60262 ecap f0101a
[ 0.022265] DMAR: DRHD base: 0x000000fed91000 flags: 0x1
[ 0.022269] DMAR: dmar1: reg_base_addr fed91000 ver 1:0 cap c9008020660262 ecap f0105a
[ 0.022270] DMAR-IR: IOAPIC id 2 under DRHD base 0xfed91000 IOMMU 1
[ 0.022271] DMAR-IR: HPET id 0 under DRHD base 0xfed91000
[ 0.022271] DMAR-IR: Queued invalidation will be enabled to support x2apic and Intr-remapping.
[ 0.022543] DMAR-IR: Enabled IRQ remapping in x2apic mode
[ 0.022544] x2apic enabled
[ 0.022549] Switched APIC routing to cluster x2apic.
[ 0.023003] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[ 0.062693] TSC deadline timer enabled
[ 0.062696] smpboot: CPU0: Intel(R) Core(TM) i5-3320M CPU @ 2.60GHz (family: 0x6, model: 0x3a, stepping: 0x9)
[ 0.062699] Performance Events: PEBS fmt1+, IvyBridge events, 16-deep LBR, full-width counters, Intel PMU driver.
[ 0.062724] ... version: 3
[ 0.062725] ... bit width: 48
[ 0.062725] ... generic registers: 4
[ 0.062725] ... value mask: 0000ffffffffffff
[ 0.062726] ... max period: 00007fffffffffff
[ 0.062726] ... fixed-purpose events: 3
[ 0.062727] ... event mask: 000000070000000f
[ 0.063258] NMI watchdog: enabled on all CPUs, permanently consumes one hw-PMU counter.
[ 0.063354] x86: Booting SMP configuration:
[ 0.063355] .... node #0, CPUs: #1 #2 #3
[ 0.304819] x86: Booted up 1 node, 4 CPUs
[ 0.304821] smpboot: Total of 4 processors activated (20755.29 BogoMIPS)
[ 0.307978] devtmpfs: initialized
[ 0.308040] x86/mm: Memory block size: 128MB
[ 0.311377] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns
[ 0.311387] futex hash table entries: 1024 (order: 4, 65536 bytes)
[ 0.311425] pinctrl core: initialized pinctrl subsystem
[ 0.311529] NET: Registered protocol family 16
[ 0.327533] cpuidle: using governor ladder
[ 0.339540] cpuidle: using governor menu
[ 0.339589] ACPI: bus type PCI registered
[ 0.339591] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
[ 0.339673] PCI: MMCONFIG for domain 0000 [bus 00-3f] at [mem 0xf8000000-0xfbffffff] (base 0xf8000000)
[ 0.339674] PCI: MMCONFIG at [mem 0xf8000000-0xfbffffff] reserved in E820
[ 0.339682] PCI: Using configuration type 1 for base access
[ 0.339716] core: PMU erratum BJ122, BV98, HSD29 worked around, HT is on
[ 0.355715] HugeTLB registered 2 MB page size, pre-allocated 0 pages
[ 0.355915] ACPI: Added _OSI(Module Device)
[ 0.355916] ACPI: Added _OSI(Processor Device)
[ 0.355917] ACPI: Added _OSI(3.0 _SCP Extensions)
[ 0.355917] ACPI: Added _OSI(Processor Aggregator Device)
[ 0.356047] ACPI: Executed 1 blocks of module-level executable AML code
[ 0.357971] ACPI : EC: EC started
[ 0.357972] ACPI : EC: interrupt blocked
[ 0.358014] ACPI: \_SB_.PCI0.LPCB.EC__: Used as first EC
[ 0.358015] ACPI: \_SB_.PCI0.LPCB.EC__: GPE=0x11, EC_CMD/EC_SC=0x66, EC_DATA=0x62
[ 0.358016] ACPI: \_SB_.PCI0.LPCB.EC__: Used as boot DSDT EC to handle transactions
[ 0.358016] ACPI: Interpreter enabled
[ 0.358032] ACPI: (supports S0 S3 S4 S5)
[ 0.358032] ACPI: Using IOAPIC for interrupt routing
[ 0.358051] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
[ 0.361925] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
[ 0.361928] acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI]
[ 0.361971] acpi PNP0A08:00: _OSC: OS now controls [PCIeHotplug PME AER PCIeCapability]
[ 0.361979] acpi PNP0A08:00: [Firmware Info]: MMCONFIG for domain 0000 [bus 00-3f] only partially covers this bridge
[ 0.362159] PCI host bridge to bus 0000:00
[ 0.362161] pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7 window]
[ 0.362162] pci_bus 0000:00: root bus resource [io 0x0d00-0xffff window]
[ 0.362164] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff window]
[ 0.362165] pci_bus 0000:00: root bus resource [mem 0x000c0000-0x000c3fff window]
[ 0.362165] pci_bus 0000:00: root bus resource [mem 0x000c4000-0x000c7fff window]
[ 0.362166] pci_bus 0000:00: root bus resource [mem 0x000c8000-0x000cbfff window]
[ 0.362167] pci_bus 0000:00: root bus resource [mem 0x000cc000-0x000cffff window]
[ 0.362168] pci_bus 0000:00: root bus resource [mem 0x000d0000-0x000d3fff window]
[ 0.362169] pci_bus 0000:00: root bus resource [mem 0x000d4000-0x000d7fff window]
[ 0.362170] pci_bus 0000:00: root bus resource [mem 0x000d8000-0x000dbfff window]
[ 0.362171] pci_bus 0000:00: root bus resource [mem 0x000dc000-0x000dffff window]
[ 0.362172] pci_bus 0000:00: root bus resource [mem 0x000e0000-0x000e3fff window]
[ 0.362173] pci_bus 0000:00: root bus resource [mem 0x000e4000-0x000e7fff window]
[ 0.362174] pci_bus 0000:00: root bus resource [mem 0x000e8000-0x000ebfff window]
[ 0.362175] pci_bus 0000:00: root bus resource [mem 0x000ec000-0x000effff window]
[ 0.362176] pci_bus 0000:00: root bus resource [mem 0x000f0000-0x000fffff window]
[ 0.362177] pci_bus 0000:00: root bus resource [mem 0xc2a00000-0xf7ffffff window]
[ 0.362178] pci_bus 0000:00: root bus resource [mem 0xfed40000-0xfed44fff window]
[ 0.362179] pci_bus 0000:00: root bus resource [bus 00-ff]
[ 0.362186] pci 0000:00:00.0: [8086:0154] type 00 class 0x060000
[ 0.362270] pci 0000:00:02.0: [8086:0166] type 00 class 0x030000
[ 0.362279] pci 0000:00:02.0: reg 0x10: [mem 0xf1000000-0xf13fffff 64bit]
[ 0.362285] pci 0000:00:02.0: reg 0x18: [mem 0xe0000000-0xefffffff 64bit pref]
[ 0.362289] pci 0000:00:02.0: reg 0x20: [io 0x3000-0x303f]
[ 0.362361] pci 0000:00:04.0: [8086:0153] type 00 class 0x118000
[ 0.362369] pci 0000:00:04.0: reg 0x10: [mem 0xf1630000-0xf1637fff 64bit]
[ 0.362460] pci 0000:00:14.0: [8086:1e31] type 00 class 0x0c0330
[ 0.362479] pci 0000:00:14.0: reg 0x10: [mem 0xf1620000-0xf162ffff 64bit]
[ 0.362546] pci 0000:00:14.0: PME# supported from D3hot D3cold
[ 0.362581] pci 0000:00:14.0: System wakeup disabled by ACPI
[ 0.362647] pci 0000:00:16.0: [8086:1e3a] type 00 class 0x078000
[ 0.362725] pci 0000:00:16.0: reg 0x10: [mem 0xf1641000-0xf164100f 64bit]
[ 0.363054] pci 0000:00:16.0: PME# supported from D0 D3hot D3cold
[ 0.363149] pci 0000:00:19.0: [8086:1502] type 00 class 0x020000
[ 0.363163] pci 0000:00:19.0: reg 0x10: [mem 0xf1600000-0xf161ffff]
[ 0.363172] pci 0000:00:19.0: reg 0x14: [mem 0xf163c000-0xf163cfff]
[ 0.363179] pci 0000:00:19.0: reg 0x18: [io 0x3040-0x305f]
[ 0.363237] pci 0000:00:19.0: PME# supported from D0 D3hot D3cold
[ 0.363300] pci 0000:00:1a.0: [8086:1e2d] type 00 class 0x0c0320
[ 0.363317] pci 0000:00:1a.0: reg 0x10: [mem 0xf163e000-0xf163e3ff]
[ 0.363399] pci 0000:00:1a.0: PME# supported from D0 D3hot D3cold
[ 0.363433] pci 0000:00:1a.0: System wakeup disabled by ACPI
[ 0.363472] pci 0000:00:1b.0: [8086:1e20] type 00 class 0x040300
[ 0.363489] pci 0000:00:1b.0: reg 0x10: [mem 0xf1638000-0xf163bfff 64bit]
[ 0.363559] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
[ 0.363596] pci 0000:00:1b.0: System wakeup disabled by ACPI
[ 0.363637] pci 0000:00:1c.0: [8086:1e10] type 01 class 0x060400
[ 0.363761] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
[ 0.363845] pci 0000:00:1c.1: [8086:1e12] type 01 class 0x060400
[ 0.363968] pci 0000:00:1c.1: PME# supported from D0 D3hot D3cold
[ 0.364055] pci 0000:00:1c.2: [8086:1e14] type 01 class 0x060400
[ 0.364180] pci 0000:00:1c.2: PME# supported from D0 D3hot D3cold
[ 0.364264] pci 0000:00:1d.0: [8086:1e26] type 00 class 0x0c0320
[ 0.364282] pci 0000:00:1d.0: reg 0x10: [mem 0xf163f000-0xf163f3ff]
[ 0.364364] pci 0000:00:1d.0: PME# supported from D0 D3hot D3cold
[ 0.364398] pci 0000:00:1d.0: System wakeup disabled by ACPI
[ 0.364435] pci 0000:00:1f.0: [8086:1e55] type 00 class 0x060100
[ 0.364595] pci 0000:00:1f.2: [8086:1e03] type 00 class 0x010601
[ 0.364610] pci 0000:00:1f.2: reg 0x10: [io 0x3080-0x3087]
[ 0.364618] pci 0000:00:1f.2: reg 0x14: [io 0x3090-0x3093]
[ 0.364626] pci 0000:00:1f.2: reg 0x18: [io 0x3088-0x308f]
[ 0.364634] pci 0000:00:1f.2: reg 0x1c: [io 0x3094-0x3097]
[ 0.364642] pci 0000:00:1f.2: reg 0x20: [io 0x3060-0x307f]
[ 0.364651] pci 0000:00:1f.2: reg 0x24: [mem 0xf163d000-0xf163d7ff]
[ 0.364694] pci 0000:00:1f.2: PME# supported from D3hot
[ 0.364757] pci 0000:00:1f.3: [8086:1e22] type 00 class 0x0c0500
[ 0.364772] pci 0000:00:1f.3: reg 0x10: [mem 0xf1640000-0xf16400ff 64bit]
[ 0.364793] pci 0000:00:1f.3: reg 0x20: [io 0x0400-0x041f]
[ 0.364968] pci 0000:01:00.0: [1180:e822] type 00 class 0x080501
[ 0.364999] pci 0000:01:00.0: MMC controller base frequency changed to 50Mhz.
[ 0.365034] pci 0000:01:00.0: reg 0x10: [mem 0xf1400000-0xf14000ff]
[ 0.365336] pci 0000:01:00.0: supports D1 D2
[ 0.365337] pci 0000:01:00.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.376878] pci 0000:00:1c.0: PCI bridge to [bus 01]
[ 0.376889] pci 0000:00:1c.0: bridge window [mem 0xf1400000-0xf14fffff]
[ 0.377006] pci 0000:02:00.0: [168c:0030] type 00 class 0x028000
[ 0.377048] pci 0000:02:00.0: reg 0x10: [mem 0xf1500000-0xf151ffff 64bit]
[ 0.377140] pci 0000:02:00.0: reg 0x30: [mem 0xf1520000-0xf152ffff pref]
[ 0.377257] pci 0000:02:00.0: supports D1
[ 0.377258] pci 0000:02:00.0: PME# supported from D0 D1 D3hot
[ 0.388882] pci 0000:00:1c.1: PCI bridge to [bus 02]
[ 0.388893] pci 0000:00:1c.1: bridge window [mem 0xf1500000-0xf15fffff]
[ 0.388986] pci 0000:00:1c.2: PCI bridge to [bus 03]
[ 0.388990] pci 0000:00:1c.2: bridge window [io 0x2000-0x2fff]
[ 0.388995] pci 0000:00:1c.2: bridge window [mem 0xf0800000-0xf0ffffff]
[ 0.389003] pci 0000:00:1c.2: bridge window [mem 0xf0000000-0xf07fffff 64bit pref]
[ 0.389114] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 10 12 14 15) *11
[ 0.389158] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 *11 12 14 15)
[ 0.389199] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 7 10 12 14 15) *11
[ 0.389240] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 *11 12 14 15)
[ 0.389280] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 10 12 14 15) *11
[ 0.389321] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 *11 12 14 15)
[ 0.389361] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 7 10 12 14 15) *11
[ 0.389401] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 7 *11 12 14 15)
[ 0.389930] ACPI: Enabled 1 GPEs in block 00 to 3F
[ 0.389992] ACPI : EC: interrupt unblocked
[ 0.389998] ACPI : EC: event unblocked
[ 0.390004] ACPI: \_SB_.PCI0.LPCB.EC__: GPE=0x11, EC_CMD/EC_SC=0x66, EC_DATA=0x62
[ 0.390005] ACPI: \_SB_.PCI0.LPCB.EC__: Used as boot DSDT EC to handle transactions and events
[ 0.390097] vgaarb: setting as boot device: PCI:0000:00:02.0
[ 0.390098] vgaarb: device added: PCI:0000:00:02.0,decodes=io+mem,owns=io+mem,locks=none
[ 0.390100] vgaarb: loaded
[ 0.390101] vgaarb: bridge control possible 0000:00:02.0
[ 0.390166] PCI: Using ACPI for IRQ routing
[ 0.391636] PCI: pci_cache_line_size set to 64 bytes
[ 0.391713] e820: reserve RAM buffer [mem 0xbff0f000-0xbfffffff]
[ 0.391714] e820: reserve RAM buffer [mem 0x43b600000-0x43bffffff]
[ 0.391844] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0, 0, 0, 0, 0
[ 0.391849] hpet0: 8 comparators, 64-bit 14.318180 MHz counter
[ 0.393871] clocksource: Switched to clocksource hpet
[ 0.399720] VFS: Disk quotas dquot_6.6.0
[ 0.399746] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[ 0.399819] pnp: PnP ACPI init
[ 0.399902] system 00:00: [mem 0xfed1c000-0xfed1ffff] has been reserved
[ 0.399904] system 00:00: [mem 0xfed10000-0xfed17fff] has been reserved
[ 0.399905] system 00:00: [mem 0xfed18000-0xfed18fff] has been reserved
[ 0.399906] system 00:00: [mem 0xfed19000-0xfed19fff] has been reserved
[ 0.399907] system 00:00: [mem 0xf8000000-0xfbffffff] has been reserved
[ 0.399909] system 00:00: [mem 0xfed20000-0xfed3ffff] has been reserved
[ 0.399910] system 00:00: [mem 0xfed40000-0xfed44fff] has been reserved
[ 0.399911] system 00:00: [mem 0xfed45000-0xfed8ffff] has been reserved
[ 0.399912] system 00:00: [mem 0x20000000-0x201fffff] could not be reserved
[ 0.399914] system 00:00: [mem 0x40000000-0x401fffff] could not be reserved
[ 0.399916] system 00:00: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.400367] system 00:01: [mem 0xfed00000-0xfed003ff] has been reserved
[ 0.400370] system 00:01: Plug and Play ACPI device, IDs PNP0103 PNP0c01 (active)
[ 0.400408] system 00:02: [io 0x0500-0x057f] has been reserved
[ 0.400409] system 00:02: [io 0x0480-0x04bf] has been reserved
[ 0.400411] system 00:02: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.400431] pnp 00:03: Plug and Play ACPI device, IDs PNP0b00 (active)
[ 0.400462] pnp 00:04: Plug and Play ACPI device, IDs PNP0303 PNP030b (active)
[ 0.400488] pnp 00:05: Plug and Play ACPI device, IDs PNP0f13 (active)
[ 0.400513] pnp 00:06: Plug and Play ACPI device, IDs PNP0c31 (active)
[ 0.400529] pnp: PnP ACPI: found 7 devices
[ 0.406698] clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns
[ 0.406739] pci 0000:00:1c.0: PCI bridge to [bus 01]
[ 0.406747] pci 0000:00:1c.0: bridge window [mem 0xf1400000-0xf14fffff]
[ 0.406759] pci 0000:00:1c.1: PCI bridge to [bus 02]
[ 0.406765] pci 0000:00:1c.1: bridge window [mem 0xf1500000-0xf15fffff]
[ 0.406776] pci 0000:00:1c.2: PCI bridge to [bus 03]
[ 0.406779] pci 0000:00:1c.2: bridge window [io 0x2000-0x2fff]
[ 0.406785] pci 0000:00:1c.2: bridge window [mem 0xf0800000-0xf0ffffff]
[ 0.406789] pci 0000:00:1c.2: bridge window [mem 0xf0000000-0xf07fffff 64bit pref]
[ 0.406798] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7 window]
[ 0.406799] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff window]
[ 0.406800] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff window]
[ 0.406801] pci_bus 0000:00: resource 7 [mem 0x000c0000-0x000c3fff window]
[ 0.406802] pci_bus 0000:00: resource 8 [mem 0x000c4000-0x000c7fff window]
[ 0.406803] pci_bus 0000:00: resource 9 [mem 0x000c8000-0x000cbfff window]
[ 0.406804] pci_bus 0000:00: resource 10 [mem 0x000cc000-0x000cffff window]
[ 0.406805] pci_bus 0000:00: resource 11 [mem 0x000d0000-0x000d3fff window]
[ 0.406806] pci_bus 0000:00: resource 12 [mem 0x000d4000-0x000d7fff window]
[ 0.406807] pci_bus 0000:00: resource 13 [mem 0x000d8000-0x000dbfff window]
[ 0.406808] pci_bus 0000:00: resource 14 [mem 0x000dc000-0x000dffff window]
[ 0.406809] pci_bus 0000:00: resource 15 [mem 0x000e0000-0x000e3fff window]
[ 0.406810] pci_bus 0000:00: resource 16 [mem 0x000e4000-0x000e7fff window]
[ 0.406811] pci_bus 0000:00: resource 17 [mem 0x000e8000-0x000ebfff window]
[ 0.406812] pci_bus 0000:00: resource 18 [mem 0x000ec000-0x000effff window]
[ 0.406813] pci_bus 0000:00: resource 19 [mem 0x000f0000-0x000fffff window]
[ 0.406814] pci_bus 0000:00: resource 20 [mem 0xc2a00000-0xf7ffffff window]
[ 0.406815] pci_bus 0000:00: resource 21 [mem 0xfed40000-0xfed44fff window]
[ 0.406816] pci_bus 0000:01: resource 1 [mem 0xf1400000-0xf14fffff]
[ 0.406818] pci_bus 0000:02: resource 1 [mem 0xf1500000-0xf15fffff]
[ 0.406819] pci_bus 0000:03: resource 0 [io 0x2000-0x2fff]
[ 0.406819] pci_bus 0000:03: resource 1 [mem 0xf0800000-0xf0ffffff]
[ 0.406820] pci_bus 0000:03: resource 2 [mem 0xf0000000-0xf07fffff 64bit pref]
[ 0.406907] NET: Registered protocol family 2
[ 0.407083] TCP established hash table entries: 131072 (order: 8, 1048576 bytes)
[ 0.407273] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
[ 0.407379] TCP: Hash tables configured (established 131072 bind 65536)
[ 0.407407] UDP hash table entries: 8192 (order: 6, 262144 bytes)
[ 0.407446] UDP-Lite hash table entries: 8192 (order: 6, 262144 bytes)
[ 0.407520] NET: Registered protocol family 1
[ 0.407532] pci 0000:00:02.0: Video device with shadowed ROM at [mem 0x000c0000-0x000dffff]
[ 0.408101] PCI: CLS 64 bytes, default 64
[ 0.408145] Unpacking initramfs...
[ 0.731947] Freeing initrd memory: 20364K (ffff97dfb5829000 - ffff97dfb6c0c000)
[ 0.732033] PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
[ 0.732035] software IO TLB [mem 0xbbf0f000-0xbff0f000] (64MB) mapped at [ffff97e03bf0f000-ffff97e03ff0efff]
[ 0.732347] audit: initializing netlink subsys (disabled)
[ 0.732363] audit: type=2000 audit(1493865709.728:1): initialized
[ 0.732633] Initialise system trusted keyrings
[ 0.732731] workingset: timestamp_bits=40 max_order=22 bucket_order=0
[ 0.732765] zbud: loaded
[ 0.773137] Key type asymmetric registered
[ 0.773138] Asymmetric key parser 'x509' registered
[ 0.773157] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 251)
[ 0.773187] io scheduler noop registered
[ 0.773188] io scheduler deadline registered
[ 0.773203] io scheduler cfq registered (default)
[ 0.773938] pcieport 0000:00:1c.0: Signaling PME through PCIe PME interrupt
[ 0.773940] pci 0000:01:00.0: Signaling PME through PCIe PME interrupt
[ 0.773945] pcie_pme 0000:00:1c.0:pcie001: service driver pcie_pme loaded
[ 0.773962] pcieport 0000:00:1c.1: Signaling PME through PCIe PME interrupt
[ 0.773963] pci 0000:02:00.0: Signaling PME through PCIe PME interrupt
[ 0.773967] pcie_pme 0000:00:1c.1:pcie001: service driver pcie_pme loaded
[ 0.773985] pcieport 0000:00:1c.2: Signaling PME through PCIe PME interrupt
[ 0.773989] pcie_pme 0000:00:1c.2:pcie001: service driver pcie_pme loaded
[ 0.773997] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[ 0.774008] pciehp 0000:00:1c.2:pcie004: Slot #0 AttnBtn- PwrCtrl- MRL- AttnInd- PwrInd- HotPlug+ Surprise+ Interlock- NoCompl+ LLActRep+
[ 0.774035] pciehp 0000:00:1c.2:pcie004: service driver pciehp loaded
[ 0.774039] pciehp: PCI Express Hot Plug Controller Driver version: 0.4
[ 0.774052] efifb: probing for efifb
[ 0.774064] efifb: framebuffer at 0xe0000000, using 4224k, total 4224k
[ 0.774065] efifb: mode is 1366x768x32, linelength=5632, pages=1
[ 0.774065] efifb: scrolling: redraw
[ 0.774066] efifb: Truecolor: size=8:8:8:8, shift=24:16:8:0
[ 0.776470] Console: switching to colour frame buffer device 170x48
[ 0.778685] fb0: EFI VGA frame buffer device
[ 0.778692] intel_idle: MWAIT substates: 0x21120
[ 0.778692] intel_idle: v0.4.1 model 0x3A
[ 0.778833] intel_idle: lapic_timer_reliable_states 0xffffffff
[ 0.779183] GHES: HEST is not enabled!
[ 0.779232] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
[ 0.779596] Linux agpgart interface v0.103
[ 0.779634] AMD IOMMUv2 driver by Joerg Roedel <jroedel@suse.de>
[ 0.779634] AMD IOMMUv2 functionality not available on this system
[ 0.779932] i8042: PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at 0x60,0x64 irq 1,12
[ 0.781620] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 0.781624] serio: i8042 AUX port at 0x60,0x64 irq 12
[ 0.781729] mousedev: PS/2 mouse device common for all mice
[ 0.781768] rtc_cmos 00:03: RTC can wake from S4
[ 0.781947] rtc_cmos 00:03: rtc core: registered rtc_cmos as rtc0
[ 0.781974] rtc_cmos 00:03: alarms up to one month, 242 bytes nvram, hpet irqs
[ 0.781981] intel_pstate: Intel P-state driver initializing
[ 0.782272] ledtrig-cpu: registered to indicate activity on CPUs
[ 0.782643] NET: Registered protocol family 10
[ 0.782973] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input0
[ 0.783022] mip6: Mobile IPv6
[ 0.783025] NET: Registered protocol family 17
[ 0.783029] mpls_gso: MPLS GSO support
[ 0.783384] microcode: sig=0x306a9, pf=0x10, revision=0x1b
[ 0.783473] microcode: Microcode Update Driver: v2.01 <tigran@aivazian.fsnet.co.uk>, Peter Oruba
[ 0.783672] registered taskstats version 1
[ 0.783674] Loading compiled-in X.509 certificates
[ 0.786225] alg: No test for pkcs1pad(rsa,sha256) (pkcs1pad(rsa-generic,sha256))
[ 0.786757] Loaded X.509 cert 'Debian Project: Ben Hutchings: 008a018dca80932630'
[ 0.786794] zswap: loaded using pool lzo/zbud
[ 0.787685] rtc_cmos 00:03: setting system clock to 2017-05-04 02:41:50 UTC (1493865710)
[ 0.787752] PM: Hibernation image not present or could not be loaded.
[ 0.789823] Freeing unused kernel memory: 1392K (ffffffffa331c000 - ffffffffa3478000)
[ 0.789824] Write protecting the kernel read-only data: 12288k
[ 0.790663] Freeing unused kernel memory: 2032K (ffff97e09d604000 - ffff97e09d800000)
[ 0.795393] Freeing unused kernel memory: 1252K (ffff97e09dac7000 - ffff97e09dc00000)
[ 0.805806] x86/mm: Checked W+X mappings: passed, no W+X pages found.
[ 0.897164] random: systemd-udevd: uninitialized urandom read (16 bytes read)
[ 0.897248] random: systemd-udevd: uninitialized urandom read (16 bytes read)
[ 0.897257] random: systemd-udevd: uninitialized urandom read (16 bytes read)
[ 0.897268] random: systemd-udevd: uninitialized urandom read (16 bytes read)
[ 0.898162] random: udevadm: uninitialized urandom read (16 bytes read)
[ 0.898198] random: udevadm: uninitialized urandom read (16 bytes read)
[ 0.899325] random: udevadm: uninitialized urandom read (16 bytes read)
[ 0.899384] random: udevadm: uninitialized urandom read (16 bytes read)
[ 0.899398] random: udevadm: uninitialized urandom read (16 bytes read)
[ 0.899696] random: udevadm: uninitialized urandom read (16 bytes read)
[ 0.924666] thermal LNXTHERM:00: registered as thermal_zone0
[ 0.924668] ACPI: Thermal Zone [THM0] (62 C)
[ 0.924857] pps_core: LinuxPPS API ver. 1 registered
[ 0.924858] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it>
[ 0.925334] thermal LNXTHERM:01: registered as thermal_zone1
[ 0.925336] ACPI: Thermal Zone [THM1] (27 C)
[ 0.925573] PTP clock support registered
[ 0.929932] ACPI: bus type USB registered
[ 0.929957] usbcore: registered new interface driver usbfs
[ 0.929967] usbcore: registered new interface driver hub
[ 0.929992] usbcore: registered new device driver usb
[ 0.930970] e1000e: Intel(R) PRO/1000 Network Driver - 3.2.6-k
[ 0.930971] e1000e: Copyright(c) 1999 - 2015 Intel Corporation.
[ 0.931044] e1000e 0000:00:19.0: Interrupt Throttling Rate (ints/sec) set to dynamic conservative mode
[ 0.931725] sdhci: Secure Digital Host Controller Interface driver
[ 0.931726] sdhci: Copyright(c) Pierre Ossman
[ 0.932881] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 0.932889] sdhci-pci 0000:01:00.0: SDHCI controller found [1180:e822] (rev 7)
[ 0.933413] ehci-pci: EHCI PCI platform driver
[ 0.943043] mmc0: SDHCI controller on PCI [0000:01:00.0] using DMA
[ 0.946639] SCSI subsystem initialized
[ 0.952560] libata version 3.00 loaded.
[ 0.953411] AVX version of gcm_enc/dec engaged.
[ 0.953412] AES CTR mode by8 optimization enabled
[ 1.075630] e1000e 0000:00:19.0 0000:00:19.0 (uninitialized): registered PHC clock
[ 1.200921] e1000e 0000:00:19.0 eth0: (PCI Express:2.5GT/s:Width x1) 3c:97:0e:b6:6c:5b
[ 1.200924] e1000e 0000:00:19.0 eth0: Intel(R) PRO/1000 Network Connection
[ 1.200985] e1000e 0000:00:19.0 eth0: MAC: 10, PHY: 11, PBA No: 1000FF-0FF
[ 1.201326] ehci-pci 0000:00:1a.0: EHCI Host Controller
[ 1.201339] ehci-pci 0000:00:1a.0: new USB bus registered, assigned bus number 1
[ 1.201361] ehci-pci 0000:00:1a.0: debug port 2
[ 1.205301] ehci-pci 0000:00:1a.0: cache line size of 64 is not supported
[ 1.205325] ehci-pci 0000:00:1a.0: irq 21, io mem 0xf163e000
[ 1.217967] ehci-pci 0000:00:1a.0: USB 2.0 started, EHCI 1.00
[ 1.218030] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
[ 1.218032] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.218034] usb usb1: Product: EHCI Host Controller
[ 1.218035] usb usb1: Manufacturer: Linux 4.9.0-2-amd64 ehci_hcd
[ 1.218037] usb usb1: SerialNumber: 0000:00:1a.0
[ 1.218297] hub 1-0:1.0: USB hub found
[ 1.218307] hub 1-0:1.0: 3 ports detected
[ 1.218645] ehci-pci 0000:00:1d.0: EHCI Host Controller
[ 1.218651] ehci-pci 0000:00:1d.0: new USB bus registered, assigned bus number 2
[ 1.218668] ehci-pci 0000:00:1d.0: debug port 2
[ 1.222570] ehci-pci 0000:00:1d.0: cache line size of 64 is not supported
[ 1.222588] ehci-pci 0000:00:1d.0: irq 19, io mem 0xf163f000
[ 1.237981] ehci-pci 0000:00:1d.0: USB 2.0 started, EHCI 1.00
[ 1.238035] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002
[ 1.238037] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.238039] usb usb2: Product: EHCI Host Controller
[ 1.238040] usb usb2: Manufacturer: Linux 4.9.0-2-amd64 ehci_hcd
[ 1.238041] usb usb2: SerialNumber: 0000:00:1d.0
[ 1.238324] hub 2-0:1.0: USB hub found
[ 1.238332] hub 2-0:1.0: 3 ports detected
[ 1.238740] xhci_hcd 0000:00:14.0: xHCI Host Controller
[ 1.238752] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 3
[ 1.239878] xhci_hcd 0000:00:14.0: hcc params 0x200071a1 hci version 0x100 quirks 0x0000b930
[ 1.239886] xhci_hcd 0000:00:14.0: cache line size of 64 is not supported
[ 1.240090] usb usb3: New USB device found, idVendor=1d6b, idProduct=0002
[ 1.240092] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.240093] usb usb3: Product: xHCI Host Controller
[ 1.240095] usb usb3: Manufacturer: Linux 4.9.0-2-amd64 xhci-hcd
[ 1.240096] usb usb3: SerialNumber: 0000:00:14.0
[ 1.240353] hub 3-0:1.0: USB hub found
[ 1.240387] hub 3-0:1.0: 4 ports detected
[ 1.240663] xhci_hcd 0000:00:14.0: xHCI Host Controller
[ 1.240669] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 4
[ 1.240766] usb usb4: New USB device found, idVendor=1d6b, idProduct=0003
[ 1.240769] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.240770] usb usb4: Product: xHCI Host Controller
[ 1.240772] usb usb4: Manufacturer: Linux 4.9.0-2-amd64 xhci-hcd
[ 1.240773] usb usb4: SerialNumber: 0000:00:14.0
[ 1.240954] hub 4-0:1.0: USB hub found
[ 1.240975] hub 4-0:1.0: 4 ports detected
[ 1.241550] i801_smbus 0000:00:1f.3: SMBus using PCI interrupt
[ 1.242790] ahci 0000:00:1f.2: version 3.0
[ 1.243111] ahci 0000:00:1f.2: SSS flag set, parallel bus scan disabled
[ 1.253240] ahci 0000:00:1f.2: AHCI 0001.0300 32 slots 6 ports 6 Gbps 0x7 impl SATA mode
[ 1.253243] ahci 0000:00:1f.2: flags: 64bit ncq sntf ilck stag pm led clo pio slum part apst
[ 1.254585] scsi host0: ahci
[ 1.254818] scsi host1: ahci
[ 1.254985] scsi host2: ahci
[ 1.255135] scsi host3: ahci
[ 1.255302] scsi host4: ahci
[ 1.255456] scsi host5: ahci
[ 1.255557] ata1: SATA max UDMA/133 abar m2048@0xf163d000 port 0xf163d100 irq 31
[ 1.255560] ata2: SATA max UDMA/133 abar m2048@0xf163d000 port 0xf163d180 irq 31
[ 1.255563] ata3: SATA max UDMA/133 abar m2048@0xf163d000 port 0xf163d200 irq 31
[ 1.255564] ata4: DUMMY
[ 1.255566] ata5: DUMMY
[ 1.255567] ata6: DUMMY
[ 1.545993] usb 1-1: new high-speed USB device number 2 using ehci-pci
[ 1.565968] usb 2-1: new high-speed USB device number 2 using ehci-pci
[ 1.568697] ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
[ 1.569463] ata1.00: ATA-9: WDC WD10SPCX-08HWST0, 01.01A01, max UDMA/133
[ 1.569466] ata1.00: 1953525168 sectors, multi 0: LBA48 NCQ (depth 31/32), AA
[ 1.570321] ata1.00: configured for UDMA/133
[ 1.570750] scsi 0:0:0:0: Direct-Access ATA WDC WD10SPCX-08H 1A01 PQ: 0 ANSI: 5
[ 1.694489] usb 1-1: New USB device found, idVendor=8087, idProduct=0024
[ 1.694492] usb 1-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[ 1.694909] hub 1-1:1.0: USB hub found
[ 1.695049] hub 1-1:1.0: 6 ports detected
[ 1.712945] psmouse serio1: synaptics: queried max coordinates: x [..5768], y [..5062]
[ 1.714554] usb 2-1: New USB device found, idVendor=8087, idProduct=0024
[ 1.714557] usb 2-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[ 1.714874] hub 2-1:1.0: USB hub found
[ 1.715054] hub 2-1:1.0: 8 ports detected
[ 1.742900] psmouse serio1: synaptics: queried min coordinates: x [1174..], y [790..]
[ 1.761977] tsc: Refined TSC clocksource calibration: 2594.102 MHz
[ 1.761986] clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x256478396d3, max_idle_ns: 440795225583 ns
[ 1.802982] psmouse serio1: synaptics: Touchpad model: 1, fw: 8.1, id: 0x1e2b1, caps: 0xd002a3/0x940300/0x123800/0x0, board id: 1611, fw id: 1099905
[ 1.802993] psmouse serio1: synaptics: serio: Synaptics pass-through port at isa0060/serio1/input0
[ 1.840811] input: SynPS/2 Synaptics TouchPad as /devices/platform/i8042/serio1/input/input2
[ 1.843614] random: fast init done
[ 1.932965] ata2: SATA link down (SStatus 0 SControl 300)
[ 1.982001] usb 1-1.4: new full-speed USB device number 3 using ehci-pci
[ 2.002001] usb 2-1.6: new full-speed USB device number 3 using ehci-pci
[ 2.094710] usb 1-1.4: New USB device found, idVendor=0a5c, idProduct=217f
[ 2.094713] usb 1-1.4: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[ 2.094715] usb 1-1.4: Product: Broadcom Bluetooth Device
[ 2.094717] usb 1-1.4: Manufacturer: Broadcom Corp
[ 2.094719] usb 1-1.4: SerialNumber: 7CE9D3B7FC24
[ 2.116224] usb 2-1.6: New USB device found, idVendor=08e6, idProduct=34ec
[ 2.116227] usb 2-1.6: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[ 2.116229] usb 2-1.6: Product: GemPC Express
[ 2.116231] usb 2-1.6: Manufacturer: Gemplus
[ 2.174026] usb 1-1.6: new high-speed USB device number 4 using ehci-pci
[ 2.248978] ata3: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[ 2.251317] ata3.00: ATA-8: LITEONIT LSS-32L6G-HP, DS51704, max UDMA/133
[ 2.251320] ata3.00: 62533296 sectors, multi 1: LBA48 NCQ (depth 31/32), AA
[ 2.251840] ata3.00: configured for UDMA/133
[ 2.252198] scsi 2:0:0:0: Direct-Access ATA LITEONIT LSS-32L 704 PQ: 0 ANSI: 5
[ 2.290067] usb 1-1.6: New USB device found, idVendor=04f2, idProduct=b2ea
[ 2.290072] usb 1-1.6: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[ 2.290075] usb 1-1.6: Product: Integrated Camera
[ 2.290078] usb 1-1.6: Manufacturer: Chicony Electronics Co., Ltd.
[ 2.295938] sd 0:0:0:0: [sda] 1953525168 512-byte logical blocks: (1.00 TB/932 GiB)
[ 2.295943] sd 0:0:0:0: [sda] 4096-byte physical blocks
[ 2.296026] sd 2:0:0:0: [sdb] 62533296 512-byte logical blocks: (32.0 GB/29.8 GiB)
[ 2.296051] sd 0:0:0:0: [sda] Write Protect is off
[ 2.296055] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 2.296107] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 2.296122] sd 2:0:0:0: [sdb] Write Protect is off
[ 2.296127] sd 2:0:0:0: [sdb] Mode Sense: 00 3a 00 00
[ 2.296160] sd 2:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 2.298099] sdb: sdb1 sdb2 sdb3 sdb5 sdb6 sdb7
[ 2.299013] sd 2:0:0:0: [sdb] Attached SCSI disk
[ 2.344530] sda: sda1 sda2 sda3 sda4 sda5 sda6 sda7 sda8
[ 2.345995] sd 0:0:0:0: [sda] Attached SCSI disk
[ 2.474031] psmouse serio2: trackpoint: IBM TrackPoint firmware: 0x0e, buttons: 3/3
[ 2.668782] input: TPPS/2 IBM TrackPoint as /devices/platform/i8042/serio1/serio2/input/input3
[ 2.786234] clocksource: Switched to clocksource tsc
[ 3.555053] md: linear personality registered for level -1
[ 3.557721] md: multipath personality registered for level -4
[ 3.560388] md: raid0 personality registered for level 0
[ 3.563685] md: raid1 personality registered for level 1
[ 3.634038] raid6: sse2x1 gen() 4777 MB/s
[ 3.702028] raid6: sse2x1 xor() 4891 MB/s
[ 3.770026] raid6: sse2x2 gen() 9864 MB/s
[ 3.838032] raid6: sse2x2 xor() 7942 MB/s
[ 3.906032] raid6: sse2x4 gen() 13084 MB/s
[ 3.974039] raid6: sse2x4 xor() 9710 MB/s
[ 3.974040] raid6: using algorithm sse2x4 gen() 13084 MB/s
[ 3.974040] raid6: .... xor() 9710 MB/s, rmw enabled
[ 3.974041] raid6: using ssse3x2 recovery algorithm
[ 3.974537] xor: automatically using best checksumming function avx
[ 3.974914] async_tx: api initialized (async)
[ 3.978190] md: raid6 personality registered for level 6
[ 3.978191] md: raid5 personality registered for level 5
[ 3.978191] md: raid4 personality registered for level 4
[ 3.984527] md: raid10 personality registered for level 10
[ 4.001899] Btrfs loaded, crc32c=crc32c-intel
[ 4.695316] PM: Starting manual resume from disk
[ 4.695322] PM: Hibernation image partition 8:2 present
[ 4.695323] PM: Looking for hibernation image.
[ 4.695510] PM: Image not found (code -22)
[ 4.695511] PM: Hibernation image not present or could not be loaded.
[ 4.798180] EXT4-fs (sdb5): mounted filesystem with ordered data mode. Opts: (null)
[ 4.933034] ip_tables: (C) 2000-2006 Netfilter Core Team
[ 4.938015] systemd[1]: systemd 232 running in system mode. (+PAM +AUDIT +SELINUX +IMA +APPARMOR +SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ +LZ4 +SECCOMP +BLKID +ELFUTILS +KMOD +IDN)
[ 4.938163] systemd[1]: Detected architecture x86-64.
[ 4.938332] systemd[1]: Set hostname to <universi-mcbk52>.
[ 5.071025] systemd[1]: transmission-daemon.service: Cannot add dependency job, ignoring: Unit transmission-daemon.service is masked.
[ 5.071037] systemd[1]: hdapsd.service: Cannot add dependency job, ignoring: Unit hdapsd.service is masked.
[ 5.071781] systemd[1]: Listening on udev Control Socket.
[ 5.071854] systemd[1]: Listening on /dev/initctl Compatibility Named Pipe.
[ 5.071882] systemd[1]: Listening on Syslog Socket.
[ 5.071912] systemd[1]: Listening on Journal Socket.
[ 5.071929] systemd[1]: Reached target User and Group Name Lookups.
[ 5.079642] random: crng init done
[ 5.096061] EXT4-fs (sdb5): re-mounted. Opts: discard,user_xattr,errors=remount-ro
[ 5.115492] RPC: Registered named UNIX socket transport module.
[ 5.115494] RPC: Registered udp transport module.
[ 5.115495] RPC: Registered tcp transport module.
[ 5.115496] RPC: Registered tcp NFSv4.1 backchannel transport module.
[ 5.121762] lp: driver loaded but no devices found
[ 5.123868] ppdev: user-space parallel port driver
[ 5.264139] input: Sleep Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/device:1f/PNP0C09:00/PNP0C0E:00/input/input4
[ 5.264144] ACPI: Sleep Button [SLPB]
[ 5.264323] input: Lid Switch as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/device:1f/PNP0C09:00/PNP0C0D:00/input/input5
[ 5.264409] ACPI: Lid Switch [LID]
[ 5.264483] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input6
[ 5.264486] ACPI: Power Button [PWRF]
[ 5.267387] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[ 5.270245] tpm_tis 00:06: 1.2 TPM (device-id 0x0, rev-id 78)
[ 5.284416] [drm] Initialized
[ 5.297905] Non-volatile memory driver v1.3
[ 5.300633] ACPI: Battery Slot [BAT0] (battery present)
[ 5.300813] ACPI: Battery Slot [BAT1] (battery absent)
[ 5.300964] ACPI: AC Adapter [AC] (on-line)
[ 5.306453] thinkpad_acpi: ThinkPad ACPI Extras v0.25
[ 5.306455] thinkpad_acpi: http://ibm-acpi.sf.net/
[ 5.306456] thinkpad_acpi: ThinkPad BIOS CBET4000 4.6-27-gec10c9a11c, EC G2HT35WW-3.22
[ 5.306457] thinkpad_acpi: Lenovo ThinkPad X230, model 23255A9
[ 5.307246] thinkpad_acpi: possible tablet mode switch found; ThinkPad in laptop mode
[ 5.307331] thinkpad_acpi: This ThinkPad has standard ACPI backlight brightness control, supported by the ACPI video driver
[ 5.307331] thinkpad_acpi: Disabling thinkpad-acpi brightness events by default...
[ 5.310497] thinkpad_acpi: Standard ACPI backlight interface available, not loading native one
[ 5.310590] thinkpad_acpi: Console audio control enabled, mode: monitor (read only)
[ 5.311963] input: ThinkPad Extra Buttons as /devices/platform/thinkpad_acpi/input/input7
[ 5.337582] sd 0:0:0:0: Attached scsi generic sg0 type 0
[ 5.337628] sd 2:0:0:0: Attached scsi generic sg1 type 0
[ 5.378586] ath: phy0: Killer Wireless card detected
[ 5.390082] ath: phy0: ASPM enabled: 0x43
[ 5.390084] ath: EEPROM regdomain: 0x60
[ 5.390085] ath: EEPROM indicates we should expect a direct regpair map
[ 5.390086] ath: Country alpha2 being used: 00
[ 5.390086] ath: Regpair used: 0x60
[ 5.404137] ieee80211 phy0: Selected rate control algorithm 'minstrel_ht'
[ 5.404338] ieee80211 phy0: Atheros AR9300 Rev:3 mem=0xffffadfec24a0000, irq=17
[ 5.647373] input: PC Speaker as /devices/platform/pcspkr/input/input8
[ 5.694256] RAPL PMU: API unit is 2^-32 Joules, 3 fixed counters, 163840 ms ovfl timer
[ 5.694257] RAPL PMU: hw unit of domain pp0-core 2^-16 Joules
[ 5.694258] RAPL PMU: hw unit of domain package 2^-16 Joules
[ 5.694258] RAPL PMU: hw unit of domain pp1-gpu 2^-16 Joules
[ 5.859868] EXT4-fs (sdb3): mounting ext2 file system using the ext4 subsystem
[ 5.863274] EXT4-fs (sdb3): mounted filesystem without journal. Opts: user_xattr
[ 5.866190] EXT4-fs (sdb7): mounted filesystem with ordered data mode. Opts: discard,user_xattr
[ 6.519121] Adding 8389628k swap on /dev/sda2. Priority:-1 extents:1 across:8389628k FS
[ 6.898834] Bluetooth: Core ver 2.22
[ 6.898857] NET: Registered protocol family 31
[ 6.898858] Bluetooth: HCI device and connection manager initialized
[ 6.898863] Bluetooth: HCI socket layer initialized
[ 6.898867] Bluetooth: L2CAP socket layer initialized
[ 6.898876] Bluetooth: SCO socket layer initialized
[ 6.911681] media: Linux media interface: v0.10
[ 6.919912] Linux video capture interface: v2.00
[ 6.975266] usbcore: registered new interface driver btusb
[ 6.994711] uvcvideo: Found UVC 1.00 device Integrated Camera (04f2:b2ea)
[ 6.996378] uvcvideo 1-1.6:1.0: Entity type for entity Extension 4 was not initialized!
[ 6.996383] uvcvideo 1-1.6:1.0: Entity type for entity Extension 3 was not initialized!
[ 6.996398] uvcvideo 1-1.6:1.0: Entity type for entity Processing 2 was not initialized!
[ 6.996401] uvcvideo 1-1.6:1.0: Entity type for entity Camera 1 was not initialized!
[ 6.996526] input: Integrated Camera as /devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.6/1-1.6:1.0/input/input9
[ 6.996611] usbcore: registered new interface driver uvcvideo
[ 6.996612] USB Video Class driver (1.1.1)
[ 7.298218] mei_me 0000:00:16.0: wait hw ready failed
[ 7.298299] mei_me 0000:00:16.0: hw_start failed ret = -62
[ 7.298387] mei_me 0000:00:16.0: H_RST is set = 0x80000015
[ 7.810535] EXT4-fs (sda5): mounted filesystem with ordered data mode. Opts: user_xattr
[ 7.870983] EXT4-fs (sdb6): mounted filesystem with ordered data mode. Opts: discard,user_xattr
[ 7.877735] systemd-journald[289]: Received request to flush runtime journal from PID 1
[ 7.972233] EXT4-fs (sda4): mounted filesystem with ordered data mode. Opts: user_xattr
[ 8.497151] EXT4-fs (sda6): mounted filesystem with ordered data mode. Opts: user_xattr
[ 9.223940] EXT4-fs (sda3): mounted filesystem with ordered data mode. Opts: user_xattr
[ 9.314336] mei_me 0000:00:16.0: wait hw ready failed
[ 9.314389] mei_me 0000:00:16.0: hw_start failed ret = -62
[ 9.314445] mei_me 0000:00:16.0: H_RST is set = 0x80000015
[ 9.528871] EXT4-fs (sda8): mounted filesystem with ordered data mode. Opts: user_xattr
[ 9.600931] EXT4-fs (sda7): mounted filesystem with ordered data mode. Opts: user_xattr
[ 10.303087] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
[ 10.303089] Bluetooth: BNEP filters: protocol multicast
[ 10.303093] Bluetooth: BNEP socket layer initialized
[ 10.355924] nfc: nfc_init: NFC Core ver 0.1
[ 10.356322] NET: Registered protocol family 39
[ 11.334379] mei_me 0000:00:16.0: wait hw ready failed
[ 11.334410] mei_me 0000:00:16.0: hw_start failed ret = -62
[ 11.334435] mei_me 0000:00:16.0: reset: reached maximal consecutive resets: disabling the device
[ 11.334473] mei_me 0000:00:16.0: reset failed ret = -19
[ 11.334497] mei_me 0000:00:16.0: link layer initialization failed.
[ 11.334518] mei_me 0000:00:16.0: init hw failure.
[ 11.334636] mei_me 0000:00:16.0: initialization failed.
[ 11.335844] ACPI Warning: SystemIO range 0x0000000000000528-0x000000000000052F conflicts with OpRegion 0x0000000000000500-0x000000000000057F (\PMIO) (20160831/utaddress-247)
[ 11.335850] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[ 11.335853] ACPI Warning: SystemIO range 0x00000000000004C0-0x00000000000004CF conflicts with OpRegion 0x0000000000000480-0x00000000000004EB (\GPIO) (20160831/utaddress-247)
[ 11.335856] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[ 11.335856] ACPI Warning: SystemIO range 0x00000000000004B0-0x00000000000004BF conflicts with OpRegion 0x0000000000000480-0x00000000000004EB (\GPIO) (20160831/utaddress-247)
[ 11.335859] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[ 11.335859] ACPI Warning: SystemIO range 0x0000000000000480-0x00000000000004AF conflicts with OpRegion 0x0000000000000480-0x00000000000004EB (\GPIO) (20160831/utaddress-247)
[ 11.335862] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[ 11.335863] lpc_ich: Resource conflict(s) found affecting gpio_ich
[ 11.336261] [drm] Memory usable by graphics device = 2048M
[ 11.336263] checking generic (e0000000 420000) vs hw (e0000000 10000000)
[ 11.336264] fb: switching to inteldrmfb from EFI VGA
[ 11.336304] Console: switching to colour dummy device 80x25
[ 11.336907] [drm] Replacing VGA console driver
[ 11.339455] iTCO_vendor_support: vendor-support=0
[ 11.340632] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.11
[ 11.340673] iTCO_wdt: Found a Panther Point TCO device (Version=2, TCOBASE=0x0560)
[ 11.340886] iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0)
[ 11.352541] snd_hda_codec_realtek hdaudioC0D0: autoconfig for ALC269VC: line_outs=1 (0x14/0x0/0x0/0x0/0x0) type:speaker
[ 11.352543] snd_hda_codec_realtek hdaudioC0D0: speaker_outs=0 (0x0/0x0/0x0/0x0/0x0)
[ 11.352544] snd_hda_codec_realtek hdaudioC0D0: hp_outs=2 (0x15/0x1b/0x0/0x0/0x0)
[ 11.352545] snd_hda_codec_realtek hdaudioC0D0: mono: mono_out=0x0
[ 11.352546] snd_hda_codec_realtek hdaudioC0D0: inputs:
[ 11.352547] snd_hda_codec_realtek hdaudioC0D0: Mic=0x18
[ 11.352548] snd_hda_codec_realtek hdaudioC0D0: Dock Mic=0x19
[ 11.352549] snd_hda_codec_realtek hdaudioC0D0: Internal Mic=0x12
[ 11.394420] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
[ 11.394422] [drm] Driver supports precise vblank timestamp query.
[ 11.394425] i915 0000:00:02.0: Invalid PCI ROM header signature: expecting 0xaa55, got 0x7b42
[ 11.394430] [drm] failed to find VBIOS tables
[ 11.394693] vgaarb: device changed decodes: PCI:0000:00:02.0,olddecodes=io+mem,decodes=io+mem:owns=io+mem
[ 11.442101] ACPI: Video Device [GFX0] (multi-head: yes rom: no post: no)
[ 11.443427] acpi device:03: registered as cooling_device4
[ 11.443510] input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:00/input/input15
[ 11.638429] snd_hda_intel 0000:00:1b.0: bound 0000:00:02.0 (ops i915_audio_component_bind_ops [i915])
[ 11.638439] [drm] Initialized i915 1.6.0 20160919 for 0000:00:02.0 on minor 0
[ 11.644602] input: HDA Digital PCBeep as /devices/pci0000:00/0000:00:1b.0/sound/card0/input10
[ 11.645819] input: HDA Intel PCH Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input11
[ 11.646415] input: HDA Intel PCH Dock Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input12
[ 11.651077] input: HDA Intel PCH Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card0/input13
[ 11.652095] input: HDA Intel PCH Dock Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card0/input14
[ 11.652518] input: HDA Intel PCH HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:1b.0/sound/card0/input16
[ 11.654275] input: HDA Intel PCH HDMI/DP,pcm=7 as /devices/pci0000:00/0000:00:1b.0/sound/card0/input17
[ 11.655037] input: HDA Intel PCH HDMI/DP,pcm=8 as /devices/pci0000:00/0000:00:1b.0/sound/card0/input18
[ 11.706533] intel_rapl: Found RAPL domain package
[ 11.706535] intel_rapl: Found RAPL domain core
[ 11.706537] intel_rapl: Found RAPL domain uncore
[ 11.824054] fbcon: inteldrmfb (fb0) is primary device
[ 12.359954] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 12.618568] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 12.628359] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
[ 12.638960] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
[ 12.654869] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
[ 12.878281] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
[ 13.047991] Console: switching to colour frame buffer device 170x48
[ 13.068784] i915 0000:00:02.0: fb0: inteldrmfb frame buffer device
[ 13.604151] ip6_tables: (C) 2000-2006 Netfilter Core Team
[ 13.619428] Ebtables v2.0 registered
[ 15.264617] e1000e: eth0 NIC Link is Up 1000 Mbps Full Duplex, Flow Control: Rx/Tx
[ 15.264664] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
[ 28.591151] Bluetooth: RFCOMM TTY layer initialized
[ 28.591159] Bluetooth: RFCOMM socket layer initialized
[ 28.591165] Bluetooth: RFCOMM ver 1.11
[ 46.162011] fuse init (API version 7.26)