blob: 26a5acfcee988f967dbb6ce2ea9693e8f6b8e192 [file] [log] [blame]
[ 0.000000] Linux version 4.9.0-2-amd64 (debian-kernel@lists.debian.org) (gcc version 6.3.0 20170221 (Debian 6.3.0-8) ) #1 SMP Debian 4.9.13-1 (2017-02-27)
[ 0.000000] Command line: BOOT_IMAGE=/vmlinuz-4.9.0-2-amd64 root=UUID=f545d1ea-3103-4100-8a85-54db5c9634ad ro quiet iomem=relaxed
[ 0.000000] x86/fpu: Supporting XSAVE feature 0x001: 'x87 floating point registers'
[ 0.000000] x86/fpu: Supporting XSAVE feature 0x002: 'SSE registers'
[ 0.000000] x86/fpu: Supporting XSAVE feature 0x004: 'AVX registers'
[ 0.000000] x86/fpu: xstate_offset[2]: 576, xstate_sizes[2]: 256
[ 0.000000] x86/fpu: Enabled xstate features 0x7, context size is 832 bytes, using 'standard' format.
[ 0.000000] x86/fpu: Using 'eager' FPU context switches.
[ 0.000000] e820: BIOS-provided physical RAM map:
[ 0.000000] BIOS-e820: [mem 0x0000000000000000-0x0000000000000fff] type 16
[ 0.000000] BIOS-e820: [mem 0x0000000000001000-0x000000000009ffff] usable
[ 0.000000] BIOS-e820: [mem 0x00000000000a0000-0x00000000000fffff] reserved
[ 0.000000] BIOS-e820: [mem 0x0000000000100000-0x00000000bff0dfff] usable
[ 0.000000] BIOS-e820: [mem 0x00000000bff0e000-0x00000000bfffffff] type 16
[ 0.000000] BIOS-e820: [mem 0x00000000c0000000-0x00000000ce9fffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000f8000000-0x00000000fbffffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fed40000-0x00000000fed44fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fed90000-0x00000000fed91fff] reserved
[ 0.000000] BIOS-e820: [mem 0x0000000100000000-0x000000042f5fffff] usable
[ 0.000000] NX (Execute Disable) protection: active
[ 0.000000] SMBIOS 2.7 present.
[ 0.000000] DMI: LENOVO 23255A9/23255A9, BIOS CBET4000 4.5-1437-ge912d933df 03/29/2017
[ 0.000000] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
[ 0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable
[ 0.000000] e820: last_pfn = 0x42f600 max_arch_pfn = 0x400000000
[ 0.000000] MTRR default type: write-back
[ 0.000000] MTRR fixed ranges enabled:
[ 0.000000] 00000-9FFFF write-back
[ 0.000000] A0000-BFFFF uncachable
[ 0.000000] C0000-FFFFF write-back
[ 0.000000] MTRR variable ranges enabled:
[ 0.000000] 0 base 0C0000000 mask FE0000000 uncachable
[ 0.000000] 1 base 0E0000000 mask FF0000000 write-combining
[ 0.000000] 2 base 0F0000000 mask FF0000000 uncachable
[ 0.000000] 3 disabled
[ 0.000000] 4 disabled
[ 0.000000] 5 disabled
[ 0.000000] 6 disabled
[ 0.000000] 7 disabled
[ 0.000000] 8 disabled
[ 0.000000] 9 disabled
[ 0.000000] x86/PAT: Configuration [0-7]: WB WC UC- UC WB WC UC- WT
[ 0.000000] e820: last_pfn = 0xbff0e max_arch_pfn = 0x400000000
[ 0.000000] Base memory trampoline at [ffff89c140099000] 99000 size 24576
[ 0.000000] BRK [0xb1d2b000, 0xb1d2bfff] PGTABLE
[ 0.000000] BRK [0xb1d2c000, 0xb1d2cfff] PGTABLE
[ 0.000000] BRK [0xb1d2d000, 0xb1d2dfff] PGTABLE
[ 0.000000] BRK [0xb1d2e000, 0xb1d2efff] PGTABLE
[ 0.000000] BRK [0xb1d2f000, 0xb1d2ffff] PGTABLE
[ 0.000000] BRK [0xb1d30000, 0xb1d30fff] PGTABLE
[ 0.000000] BRK [0xb1d31000, 0xb1d31fff] PGTABLE
[ 0.000000] BRK [0xb1d32000, 0xb1d32fff] PGTABLE
[ 0.000000] BRK [0xb1d33000, 0xb1d33fff] PGTABLE
[ 0.000000] BRK [0xb1d34000, 0xb1d34fff] PGTABLE
[ 0.000000] BRK [0xb1d35000, 0xb1d35fff] PGTABLE
[ 0.000000] BRK [0xb1d36000, 0xb1d36fff] PGTABLE
[ 0.000000] RAMDISK: [mem 0x3582b000-0x36c0cfff]
[ 0.000000] ACPI: Early table checksum verification disabled
[ 0.000000] ACPI: RSDP 0x00000000000F64B0 000024 (v02 CORE )
[ 0.000000] ACPI: XSDT 0x00000000BFF220E0 00005C (v01 CORE COREBOOT 00000000 CORE 00000000)
[ 0.000000] ACPI: FACP 0x00000000BFF25700 0000F4 (v04 CORE COREBOOT 00000000 CORE 00000000)
[ 0.000000] ACPI: DSDT 0x00000000BFF22280 00347D (v02 COREv4 COREBOOT 20110725 INTL 20161222)
[ 0.000000] ACPI: FACS 0x00000000BFF22240 000040
[ 0.000000] ACPI: FACS 0x00000000BFF22240 000040
[ 0.000000] ACPI: SSDT 0x00000000BFF25800 00189E (v02 CORE COREBOOT 0000002A CORE 0000002A)
[ 0.000000] ACPI: MCFG 0x00000000BFF270A0 00003C (v01 CORE COREBOOT 00000000 CORE 00000000)
[ 0.000000] ACPI: TCPA 0x00000000BFF270E0 000032 (v02 CORE COREBOOT 00000000 CORE 00000000)
[ 0.000000] ACPI: APIC 0x00000000BFF27120 00006C (v01 CORE COREBOOT 00000000 CORE 00000000)
[ 0.000000] ACPI: DMAR 0x00000000BFF27190 0000A8 (v01 CORE COREBOOT 00000000 CORE 00000000)
[ 0.000000] ACPI: HPET 0x00000000BFF27240 000038 (v01 CORE COREBOOT 00000000 CORE 00000000)
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] No NUMA configuration found
[ 0.000000] Faking a node at [mem 0x0000000000000000-0x000000042f5fffff]
[ 0.000000] NODE_DATA(0) allocated [mem 0x42f5f3000-0x42f5f7fff]
[ 0.000000] Zone ranges:
[ 0.000000] DMA [mem 0x0000000000001000-0x0000000000ffffff]
[ 0.000000] DMA32 [mem 0x0000000001000000-0x00000000ffffffff]
[ 0.000000] Normal [mem 0x0000000100000000-0x000000042f5fffff]
[ 0.000000] Device empty
[ 0.000000] Movable zone start for each node
[ 0.000000] Early memory node ranges
[ 0.000000] node 0: [mem 0x0000000000001000-0x000000000009ffff]
[ 0.000000] node 0: [mem 0x0000000000100000-0x00000000bff0dfff]
[ 0.000000] node 0: [mem 0x0000000100000000-0x000000042f5fffff]
[ 0.000000] Initmem setup node 0 [mem 0x0000000000001000-0x000000042f5fffff]
[ 0.000000] On node 0 totalpages: 4125869
[ 0.000000] DMA zone: 64 pages used for memmap
[ 0.000000] DMA zone: 22 pages reserved
[ 0.000000] DMA zone: 3999 pages, LIFO batch:0
[ 0.000000] DMA32 zone: 12221 pages used for memmap
[ 0.000000] DMA32 zone: 782094 pages, LIFO batch:31
[ 0.000000] Normal zone: 52184 pages used for memmap
[ 0.000000] Normal zone: 3339776 pages, LIFO batch:31
[ 0.000000] Reserving Intel graphics memory at 0x00000000c0a00000-0x00000000ce9fffff
[ 0.000000] ACPI: PM-Timer IO Port: 0x508
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-23
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[ 0.000000] ACPI: IRQ0 used by override.
[ 0.000000] ACPI: IRQ9 used by override.
[ 0.000000] Using ACPI (MADT) for SMP configuration information
[ 0.000000] ACPI: HPET id: 0x8086a701 base: 0xfed00000
[ 0.000000] smpboot: Allowing 4 CPUs, 0 hotplug CPUs
[ 0.000000] PM: Registered nosave memory: [mem 0x00000000-0x00000fff]
[ 0.000000] PM: Registered nosave memory: [mem 0x000a0000-0x000fffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xbff0e000-0xbfffffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xc0000000-0xce9fffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xcea00000-0xf7ffffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xf8000000-0xfbffffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfc000000-0xfed3ffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfed40000-0xfed44fff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfed45000-0xfed8ffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfed90000-0xfed91fff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfed92000-0xffffffff]
[ 0.000000] e820: [mem 0xcea00000-0xf7ffffff] available for PCI devices
[ 0.000000] Booting paravirtualized kernel on bare hardware
[ 0.000000] clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645519600211568 ns
[ 0.000000] setup_percpu: NR_CPUS:512 nr_cpumask_bits:512 nr_cpu_ids:4 nr_node_ids:1
[ 0.000000] percpu: Embedded 35 pages/cpu @ffff89c56f200000 s103384 r8192 d31784 u524288
[ 0.000000] pcpu-alloc: s103384 r8192 d31784 u524288 alloc=1*2097152
[ 0.000000] pcpu-alloc: [0] 0 1 2 3
[ 0.000000] Built 1 zonelists in Node order, mobility grouping on. Total pages: 4061378
[ 0.000000] Policy zone: Normal
[ 0.000000] Kernel command line: BOOT_IMAGE=/vmlinuz-4.9.0-2-amd64 root=UUID=f545d1ea-3103-4100-8a85-54db5c9634ad ro quiet iomem=relaxed
[ 0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes)
[ 0.000000] Calgary: detecting Calgary via BIOS EBDA area
[ 0.000000] Calgary: Unable to locate Rio Grande table in EBDA - bailing!
[ 0.000000] Memory: 16142772K/16503476K available (6142K kernel code, 1129K rwdata, 2844K rodata, 1392K init, 684K bss, 360704K reserved, 0K cma-reserved)
[ 0.000000] Hierarchical RCU implementation.
[ 0.000000] Build-time adjustment of leaf fanout to 64.
[ 0.000000] RCU restricting CPUs from NR_CPUS=512 to nr_cpu_ids=4.
[ 0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=64, nr_cpu_ids=4
[ 0.000000] NR_IRQS:33024 nr_irqs:456 16
[ 0.000000] Console: colour dummy device 80x25
[ 0.000000] console [tty0] enabled
[ 0.000000] clocksource: hpet: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 133484882848 ns
[ 0.000000] hpet clockevent registered
[ 0.000000] tsc: Fast TSC calibration using PIT
[ 0.000000] tsc: Detected 2593.987 MHz processor
[ 0.000025] Calibrating delay loop (skipped), value calculated using timer frequency.. 5187.97 BogoMIPS (lpj=10375948)
[ 0.000027] pid_max: default: 32768 minimum: 301
[ 0.000040] ACPI: Core revision 20160831
[ 0.002597] ACPI: 2 ACPI AML tables successfully acquired and loaded
[ 0.002639] Security Framework initialized
[ 0.002640] Yama: disabled by default; enable with sysctl kernel.yama.*
[ 0.002646] AppArmor: AppArmor disabled by boot time parameter
[ 0.003371] Dentry cache hash table entries: 2097152 (order: 12, 16777216 bytes)
[ 0.007091] Inode-cache hash table entries: 1048576 (order: 11, 8388608 bytes)
[ 0.008785] Mount-cache hash table entries: 32768 (order: 6, 262144 bytes)
[ 0.008798] Mountpoint-cache hash table entries: 32768 (order: 6, 262144 bytes)
[ 0.009090] CPU: Physical Processor ID: 0
[ 0.009091] CPU: Processor Core ID: 0
[ 0.009097] mce: CPU supports 7 MCE banks
[ 0.009105] CPU0: Thermal monitoring enabled (TM1)
[ 0.009115] process: using mwait in idle threads
[ 0.009117] Last level iTLB entries: 4KB 512, 2MB 8, 4MB 8
[ 0.009118] Last level dTLB entries: 4KB 512, 2MB 32, 4MB 32, 1GB 0
[ 0.009527] Freeing SMP alternatives memory: 24K (ffffffff99a78000 - ffffffff99a7e000)
[ 0.011664] ftrace: allocating 24999 entries in 98 pages
[ 0.022396] smpboot: Max logical packages: 2
[ 0.022401] DMAR: Host address width 36
[ 0.022402] DMAR: DRHD base: 0x000000fed90000 flags: 0x0
[ 0.022411] DMAR: dmar0: reg_base_addr fed90000 ver 1:0 cap c0000020e60262 ecap f0101a
[ 0.022412] DMAR: DRHD base: 0x000000fed91000 flags: 0x1
[ 0.022415] DMAR: dmar1: reg_base_addr fed91000 ver 1:0 cap c9008020660262 ecap f0105a
[ 0.022417] DMAR-IR: IOAPIC id 2 under DRHD base 0xfed91000 IOMMU 1
[ 0.022418] DMAR-IR: HPET id 0 under DRHD base 0xfed91000
[ 0.022419] DMAR-IR: Queued invalidation will be enabled to support x2apic and Intr-remapping.
[ 0.022686] DMAR-IR: Enabled IRQ remapping in x2apic mode
[ 0.022687] x2apic enabled
[ 0.022692] Switched APIC routing to cluster x2apic.
[ 0.023150] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[ 0.062839] TSC deadline timer enabled
[ 0.062841] smpboot: CPU0: Intel(R) Core(TM) i5-3320M CPU @ 2.60GHz (family: 0x6, model: 0x3a, stepping: 0x9)
[ 0.062845] Performance Events: PEBS fmt1+, IvyBridge events, 16-deep LBR, full-width counters, Intel PMU driver.
[ 0.062869] ... version: 3
[ 0.062870] ... bit width: 48
[ 0.062870] ... generic registers: 4
[ 0.062871] ... value mask: 0000ffffffffffff
[ 0.062871] ... max period: 00007fffffffffff
[ 0.062871] ... fixed-purpose events: 3
[ 0.062872] ... event mask: 000000070000000f
[ 0.063407] NMI watchdog: enabled on all CPUs, permanently consumes one hw-PMU counter.
[ 0.063506] x86: Booting SMP configuration:
[ 0.063507] .... node #0, CPUs: #1 #2 #3
[ 0.304966] x86: Booted up 1 node, 4 CPUs
[ 0.304968] smpboot: Total of 4 processors activated (20755.35 BogoMIPS)
[ 0.308122] devtmpfs: initialized
[ 0.308184] x86/mm: Memory block size: 128MB
[ 0.311507] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns
[ 0.311516] futex hash table entries: 1024 (order: 4, 65536 bytes)
[ 0.311554] pinctrl core: initialized pinctrl subsystem
[ 0.311655] NET: Registered protocol family 16
[ 0.327684] cpuidle: using governor ladder
[ 0.339692] cpuidle: using governor menu
[ 0.339740] ACPI: bus type PCI registered
[ 0.339742] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
[ 0.339823] PCI: MMCONFIG for domain 0000 [bus 00-3f] at [mem 0xf8000000-0xfbffffff] (base 0xf8000000)
[ 0.339825] PCI: MMCONFIG at [mem 0xf8000000-0xfbffffff] reserved in E820
[ 0.339833] PCI: Using configuration type 1 for base access
[ 0.339866] core: PMU erratum BJ122, BV98, HSD29 worked around, HT is on
[ 0.355868] HugeTLB registered 2 MB page size, pre-allocated 0 pages
[ 0.356069] ACPI: Added _OSI(Module Device)
[ 0.356070] ACPI: Added _OSI(Processor Device)
[ 0.356071] ACPI: Added _OSI(3.0 _SCP Extensions)
[ 0.356072] ACPI: Added _OSI(Processor Aggregator Device)
[ 0.356202] ACPI: Executed 1 blocks of module-level executable AML code
[ 0.358141] ACPI : EC: EC started
[ 0.358183] ACPI: \_SB_.PCI0.LPCB.EC__: Used as first EC
[ 0.358185] ACPI: \_SB_.PCI0.LPCB.EC__: GPE=0x11, EC_CMD/EC_SC=0x66, EC_DATA=0x62
[ 0.358186] ACPI: \_SB_.PCI0.LPCB.EC__: Used as boot DSDT EC to handle transactions
[ 0.358187] ACPI: Interpreter enabled
[ 0.358202] ACPI: (supports S0 S3 S4 S5)
[ 0.358203] ACPI: Using IOAPIC for interrupt routing
[ 0.358221] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
[ 0.530011] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
[ 0.530014] acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI]
[ 0.530058] acpi PNP0A08:00: _OSC: OS now controls [PCIeHotplug PME AER PCIeCapability]
[ 0.530067] acpi PNP0A08:00: [Firmware Info]: MMCONFIG for domain 0000 [bus 00-3f] only partially covers this bridge
[ 0.530113] acpi PNP0A08:00: ignoring host bridge window [mem 0x000c4000-0x000c7fff window] (conflicts with Video ROM [mem 0x000c0000-0x000c69ff])
[ 0.530248] PCI host bridge to bus 0000:00
[ 0.530249] pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7 window]
[ 0.530250] pci_bus 0000:00: root bus resource [io 0x0d00-0xffff window]
[ 0.530251] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff window]
[ 0.530252] pci_bus 0000:00: root bus resource [mem 0x000c0000-0x000c3fff window]
[ 0.530253] pci_bus 0000:00: root bus resource [mem 0x000c8000-0x000cbfff window]
[ 0.530254] pci_bus 0000:00: root bus resource [mem 0x000cc000-0x000cffff window]
[ 0.530255] pci_bus 0000:00: root bus resource [mem 0x000d0000-0x000d3fff window]
[ 0.530256] pci_bus 0000:00: root bus resource [mem 0x000d4000-0x000d7fff window]
[ 0.530257] pci_bus 0000:00: root bus resource [mem 0x000d8000-0x000dbfff window]
[ 0.530258] pci_bus 0000:00: root bus resource [mem 0x000dc000-0x000dffff window]
[ 0.530259] pci_bus 0000:00: root bus resource [mem 0x000e0000-0x000e3fff window]
[ 0.530260] pci_bus 0000:00: root bus resource [mem 0x000e4000-0x000e7fff window]
[ 0.530261] pci_bus 0000:00: root bus resource [mem 0x000e8000-0x000ebfff window]
[ 0.530262] pci_bus 0000:00: root bus resource [mem 0x000ec000-0x000effff window]
[ 0.530263] pci_bus 0000:00: root bus resource [mem 0x000f0000-0x000fffff window]
[ 0.530264] pci_bus 0000:00: root bus resource [mem 0xcea00000-0xf7ffffff window]
[ 0.530265] pci_bus 0000:00: root bus resource [mem 0xfed40000-0xfed44fff window]
[ 0.530267] pci_bus 0000:00: root bus resource [bus 00-ff]
[ 0.530273] pci 0000:00:00.0: [8086:0154] type 00 class 0x060000
[ 0.530358] pci 0000:00:02.0: [8086:0166] type 00 class 0x030000
[ 0.530367] pci 0000:00:02.0: reg 0x10: [mem 0xf1000000-0xf13fffff 64bit]
[ 0.530373] pci 0000:00:02.0: reg 0x18: [mem 0xe0000000-0xefffffff 64bit pref]
[ 0.530377] pci 0000:00:02.0: reg 0x20: [io 0x3000-0x303f]
[ 0.530450] pci 0000:00:04.0: [8086:0153] type 00 class 0x118000
[ 0.530457] pci 0000:00:04.0: reg 0x10: [mem 0xf1630000-0xf1637fff 64bit]
[ 0.530549] pci 0000:00:14.0: [8086:1e31] type 00 class 0x0c0330
[ 0.530569] pci 0000:00:14.0: reg 0x10: [mem 0xf1620000-0xf162ffff 64bit]
[ 0.530636] pci 0000:00:14.0: PME# supported from D3hot D3cold
[ 0.530670] pci 0000:00:14.0: System wakeup disabled by ACPI
[ 0.530736] pci 0000:00:16.0: [8086:1e3a] type 00 class 0x078000
[ 0.530814] pci 0000:00:16.0: reg 0x10: [mem 0xf1641000-0xf164100f 64bit]
[ 0.531146] pci 0000:00:16.0: PME# supported from D0 D3hot D3cold
[ 0.531241] pci 0000:00:19.0: [8086:1502] type 00 class 0x020000
[ 0.531256] pci 0000:00:19.0: reg 0x10: [mem 0xf1600000-0xf161ffff]
[ 0.531263] pci 0000:00:19.0: reg 0x14: [mem 0xf163c000-0xf163cfff]
[ 0.531271] pci 0000:00:19.0: reg 0x18: [io 0x3040-0x305f]
[ 0.531329] pci 0000:00:19.0: PME# supported from D0 D3hot D3cold
[ 0.531394] pci 0000:00:1a.0: [8086:1e2d] type 00 class 0x0c0320
[ 0.531411] pci 0000:00:1a.0: reg 0x10: [mem 0xf163e000-0xf163e3ff]
[ 0.531492] pci 0000:00:1a.0: PME# supported from D0 D3hot D3cold
[ 0.531526] pci 0000:00:1a.0: System wakeup disabled by ACPI
[ 0.531565] pci 0000:00:1b.0: [8086:1e20] type 00 class 0x040300
[ 0.531582] pci 0000:00:1b.0: reg 0x10: [mem 0xf1638000-0xf163bfff 64bit]
[ 0.531652] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
[ 0.531689] pci 0000:00:1b.0: System wakeup disabled by ACPI
[ 0.531730] pci 0000:00:1c.0: [8086:1e10] type 01 class 0x060400
[ 0.531854] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
[ 0.531937] pci 0000:00:1c.1: [8086:1e12] type 01 class 0x060400
[ 0.532060] pci 0000:00:1c.1: PME# supported from D0 D3hot D3cold
[ 0.532146] pci 0000:00:1c.2: [8086:1e14] type 01 class 0x060400
[ 0.532271] pci 0000:00:1c.2: PME# supported from D0 D3hot D3cold
[ 0.532356] pci 0000:00:1d.0: [8086:1e26] type 00 class 0x0c0320
[ 0.532373] pci 0000:00:1d.0: reg 0x10: [mem 0xf163f000-0xf163f3ff]
[ 0.532454] pci 0000:00:1d.0: PME# supported from D0 D3hot D3cold
[ 0.532488] pci 0000:00:1d.0: System wakeup disabled by ACPI
[ 0.532525] pci 0000:00:1f.0: [8086:1e55] type 00 class 0x060100
[ 0.532684] pci 0000:00:1f.2: [8086:1e03] type 00 class 0x010601
[ 0.532700] pci 0000:00:1f.2: reg 0x10: [io 0x3080-0x3087]
[ 0.532708] pci 0000:00:1f.2: reg 0x14: [io 0x3090-0x3093]
[ 0.532716] pci 0000:00:1f.2: reg 0x18: [io 0x3088-0x308f]
[ 0.532724] pci 0000:00:1f.2: reg 0x1c: [io 0x3094-0x3097]
[ 0.532732] pci 0000:00:1f.2: reg 0x20: [io 0x3060-0x307f]
[ 0.532740] pci 0000:00:1f.2: reg 0x24: [mem 0xf163d000-0xf163d7ff]
[ 0.532783] pci 0000:00:1f.2: PME# supported from D3hot
[ 0.532847] pci 0000:00:1f.3: [8086:1e22] type 00 class 0x0c0500
[ 0.532862] pci 0000:00:1f.3: reg 0x10: [mem 0xf1640000-0xf16400ff 64bit]
[ 0.532882] pci 0000:00:1f.3: reg 0x20: [io 0x0400-0x041f]
[ 0.533052] pci 0000:01:00.0: [1180:e823] type 00 class 0x080501
[ 0.533095] pci 0000:01:00.0: MMC controller base frequency changed to 50Mhz.
[ 0.533133] pci 0000:01:00.0: reg 0x10: [mem 0xf1400000-0xf14000ff]
[ 0.533434] pci 0000:01:00.0: supports D1 D2
[ 0.533435] pci 0000:01:00.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.545131] pci 0000:00:1c.0: PCI bridge to [bus 01]
[ 0.545142] pci 0000:00:1c.0: bridge window [mem 0xf1400000-0xf14fffff]
[ 0.545259] pci 0000:02:00.0: [168c:0030] type 00 class 0x028000
[ 0.545300] pci 0000:02:00.0: reg 0x10: [mem 0xf1500000-0xf151ffff 64bit]
[ 0.545383] pci 0000:02:00.0: reg 0x30: [mem 0xf1520000-0xf152ffff pref]
[ 0.545500] pci 0000:02:00.0: supports D1
[ 0.545501] pci 0000:02:00.0: PME# supported from D0 D1 D3hot
[ 0.557135] pci 0000:00:1c.1: PCI bridge to [bus 02]
[ 0.557145] pci 0000:00:1c.1: bridge window [mem 0xf1500000-0xf15fffff]
[ 0.557251] pci 0000:00:1c.2: PCI bridge to [bus 03]
[ 0.557255] pci 0000:00:1c.2: bridge window [io 0x2000-0x2fff]
[ 0.557259] pci 0000:00:1c.2: bridge window [mem 0xf0800000-0xf0ffffff]
[ 0.557267] pci 0000:00:1c.2: bridge window [mem 0xf0000000-0xf07fffff 64bit pref]
[ 0.557379] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 10 12 14 15) *11
[ 0.557423] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 *11 12 14 15)
[ 0.557464] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 7 10 12 14 15) *11
[ 0.557505] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 *11 12 14 15)
[ 0.557545] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 10 12 14 15) *11
[ 0.557586] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 *11 12 14 15)
[ 0.557626] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 7 10 12 14 15) *11
[ 0.557667] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 7 *11 12 14 15)
[ 0.589421] ACPI: Enabled 1 GPEs in block 00 to 3F
[ 0.589487] ACPI : EC: event unblocked
[ 0.589494] ACPI: \_SB_.PCI0.LPCB.EC__: GPE=0x11, EC_CMD/EC_SC=0x66, EC_DATA=0x62
[ 0.589495] ACPI: \_SB_.PCI0.LPCB.EC__: Used as boot DSDT EC to handle transactions and events
[ 0.589588] vgaarb: setting as boot device: PCI:0000:00:02.0
[ 0.589589] vgaarb: device added: PCI:0000:00:02.0,decodes=io+mem,owns=io+mem,locks=none
[ 0.589591] vgaarb: loaded
[ 0.589592] vgaarb: bridge control possible 0000:00:02.0
[ 0.589655] PCI: Using ACPI for IRQ routing
[ 0.591126] PCI: pci_cache_line_size set to 64 bytes
[ 0.591210] e820: reserve RAM buffer [mem 0xbff0e000-0xbfffffff]
[ 0.591211] e820: reserve RAM buffer [mem 0x42f600000-0x42fffffff]
[ 0.591346] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0, 0, 0, 0, 0
[ 0.591350] hpet0: 8 comparators, 64-bit 14.318180 MHz counter
[ 0.593371] clocksource: Switched to clocksource hpet
[ 0.599193] VFS: Disk quotas dquot_6.6.0
[ 0.599217] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[ 0.599292] pnp: PnP ACPI init
[ 0.599375] system 00:00: [mem 0xfed1c000-0xfed1ffff] has been reserved
[ 0.599376] system 00:00: [mem 0xfed10000-0xfed17fff] has been reserved
[ 0.599377] system 00:00: [mem 0xfed18000-0xfed18fff] has been reserved
[ 0.599379] system 00:00: [mem 0xfed19000-0xfed19fff] has been reserved
[ 0.599380] system 00:00: [mem 0xf8000000-0xfbffffff] has been reserved
[ 0.599381] system 00:00: [mem 0xfed20000-0xfed3ffff] has been reserved
[ 0.599383] system 00:00: [mem 0xfed40000-0xfed44fff] has been reserved
[ 0.599384] system 00:00: [mem 0xfed45000-0xfed8ffff] has been reserved
[ 0.599385] system 00:00: [mem 0x20000000-0x201fffff] could not be reserved
[ 0.599386] system 00:00: [mem 0x40000000-0x401fffff] could not be reserved
[ 0.599390] system 00:00: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.599800] system 00:01: [mem 0xfed00000-0xfed003ff] has been reserved
[ 0.599802] system 00:01: Plug and Play ACPI device, IDs PNP0103 PNP0c01 (active)
[ 0.599840] system 00:02: [io 0x0500-0x057f] has been reserved
[ 0.599841] system 00:02: [io 0x0480-0x04bf] has been reserved
[ 0.599843] system 00:02: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.599863] pnp 00:03: Plug and Play ACPI device, IDs PNP0b00 (active)
[ 0.599894] pnp 00:04: Plug and Play ACPI device, IDs PNP0303 PNP030b (active)
[ 0.599920] pnp 00:05: Plug and Play ACPI device, IDs PNP0f13 (active)
[ 0.599947] pnp 00:06: Plug and Play ACPI device, IDs PNP0c31 (active)
[ 0.599963] pnp: PnP ACPI: found 7 devices
[ 0.606161] clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns
[ 0.606202] pci 0000:00:1c.0: PCI bridge to [bus 01]
[ 0.606210] pci 0000:00:1c.0: bridge window [mem 0xf1400000-0xf14fffff]
[ 0.606221] pci 0000:00:1c.1: PCI bridge to [bus 02]
[ 0.606227] pci 0000:00:1c.1: bridge window [mem 0xf1500000-0xf15fffff]
[ 0.606239] pci 0000:00:1c.2: PCI bridge to [bus 03]
[ 0.606241] pci 0000:00:1c.2: bridge window [io 0x2000-0x2fff]
[ 0.606247] pci 0000:00:1c.2: bridge window [mem 0xf0800000-0xf0ffffff]
[ 0.606252] pci 0000:00:1c.2: bridge window [mem 0xf0000000-0xf07fffff 64bit pref]
[ 0.606261] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7 window]
[ 0.606262] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff window]
[ 0.606263] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff window]
[ 0.606264] pci_bus 0000:00: resource 7 [mem 0x000c0000-0x000c3fff window]
[ 0.606265] pci_bus 0000:00: resource 8 [mem 0x000c8000-0x000cbfff window]
[ 0.606266] pci_bus 0000:00: resource 9 [mem 0x000cc000-0x000cffff window]
[ 0.606267] pci_bus 0000:00: resource 10 [mem 0x000d0000-0x000d3fff window]
[ 0.606268] pci_bus 0000:00: resource 11 [mem 0x000d4000-0x000d7fff window]
[ 0.606269] pci_bus 0000:00: resource 12 [mem 0x000d8000-0x000dbfff window]
[ 0.606270] pci_bus 0000:00: resource 13 [mem 0x000dc000-0x000dffff window]
[ 0.606271] pci_bus 0000:00: resource 14 [mem 0x000e0000-0x000e3fff window]
[ 0.606272] pci_bus 0000:00: resource 15 [mem 0x000e4000-0x000e7fff window]
[ 0.606273] pci_bus 0000:00: resource 16 [mem 0x000e8000-0x000ebfff window]
[ 0.606274] pci_bus 0000:00: resource 17 [mem 0x000ec000-0x000effff window]
[ 0.606275] pci_bus 0000:00: resource 18 [mem 0x000f0000-0x000fffff window]
[ 0.606276] pci_bus 0000:00: resource 19 [mem 0xcea00000-0xf7ffffff window]
[ 0.606277] pci_bus 0000:00: resource 20 [mem 0xfed40000-0xfed44fff window]
[ 0.606278] pci_bus 0000:01: resource 1 [mem 0xf1400000-0xf14fffff]
[ 0.606279] pci_bus 0000:02: resource 1 [mem 0xf1500000-0xf15fffff]
[ 0.606280] pci_bus 0000:03: resource 0 [io 0x2000-0x2fff]
[ 0.606281] pci_bus 0000:03: resource 1 [mem 0xf0800000-0xf0ffffff]
[ 0.606282] pci_bus 0000:03: resource 2 [mem 0xf0000000-0xf07fffff 64bit pref]
[ 0.606368] NET: Registered protocol family 2
[ 0.606550] TCP established hash table entries: 131072 (order: 8, 1048576 bytes)
[ 0.606742] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
[ 0.606850] TCP: Hash tables configured (established 131072 bind 65536)
[ 0.606877] UDP hash table entries: 8192 (order: 6, 262144 bytes)
[ 0.606915] UDP-Lite hash table entries: 8192 (order: 6, 262144 bytes)
[ 0.606988] NET: Registered protocol family 1
[ 0.607000] pci 0000:00:02.0: Video device with shadowed ROM at [mem 0x000c0000-0x000dffff]
[ 0.607571] PCI: CLS 64 bytes, default 64
[ 0.607616] Unpacking initramfs...
[ 0.931552] Freeing initrd memory: 20360K (ffff89c17582b000 - ffff89c176c0d000)
[ 0.931588] PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
[ 0.931590] software IO TLB [mem 0xbbf0e000-0xbff0e000] (64MB) mapped at [ffff89c1fbf0e000-ffff89c1fff0dfff]
[ 0.931903] audit: initializing netlink subsys (disabled)
[ 0.931919] audit: type=2000 audit(1490786139.928:1): initialized
[ 0.932190] Initialise system trusted keyrings
[ 0.932282] workingset: timestamp_bits=40 max_order=22 bucket_order=0
[ 0.932316] zbud: loaded
[ 0.972663] Key type asymmetric registered
[ 0.972664] Asymmetric key parser 'x509' registered
[ 0.972681] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 251)
[ 0.972708] io scheduler noop registered
[ 0.972709] io scheduler deadline registered
[ 0.972724] io scheduler cfq registered (default)
[ 0.973459] pcieport 0000:00:1c.0: Signaling PME through PCIe PME interrupt
[ 0.973460] pci 0000:01:00.0: Signaling PME through PCIe PME interrupt
[ 0.973465] pcie_pme 0000:00:1c.0:pcie001: service driver pcie_pme loaded
[ 0.973482] pcieport 0000:00:1c.1: Signaling PME through PCIe PME interrupt
[ 0.973483] pci 0000:02:00.0: Signaling PME through PCIe PME interrupt
[ 0.973488] pcie_pme 0000:00:1c.1:pcie001: service driver pcie_pme loaded
[ 0.973504] pcieport 0000:00:1c.2: Signaling PME through PCIe PME interrupt
[ 0.973509] pcie_pme 0000:00:1c.2:pcie001: service driver pcie_pme loaded
[ 0.973517] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[ 0.973528] pciehp 0000:00:1c.2:pcie004: Slot #0 AttnBtn- PwrCtrl- MRL- AttnInd- PwrInd- HotPlug+ Surprise+ Interlock- NoCompl+ LLActRep+
[ 0.973558] pciehp 0000:00:1c.2:pcie004: service driver pciehp loaded
[ 0.973562] pciehp: PCI Express Hot Plug Controller Driver version: 0.4
[ 0.973574] efifb: probing for efifb
[ 0.973590] efifb: framebuffer at 0xe0000000, using 4160k, total 4160k
[ 0.973590] efifb: mode is 1376x768x32, linelength=5504, pages=1
[ 0.973591] efifb: scrolling: redraw
[ 0.973592] efifb: Truecolor: size=8:8:8:8, shift=24:16:8:0
[ 0.975823] Console: switching to colour frame buffer device 172x48
[ 0.977967] fb0: EFI VGA frame buffer device
[ 0.977973] intel_idle: MWAIT substates: 0x21120
[ 0.977974] intel_idle: v0.4.1 model 0x3A
[ 0.978114] intel_idle: lapic_timer_reliable_states 0xffffffff
[ 0.978469] GHES: HEST is not enabled!
[ 0.978518] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
[ 0.978876] Linux agpgart interface v0.103
[ 0.978914] AMD IOMMUv2 driver by Joerg Roedel <jroedel@suse.de>
[ 0.978914] AMD IOMMUv2 functionality not available on this system
[ 0.979215] i8042: PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at 0x60,0x64 irq 1,12
[ 0.981004] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 0.981008] serio: i8042 AUX port at 0x60,0x64 irq 12
[ 0.981116] mousedev: PS/2 mouse device common for all mice
[ 0.981153] rtc_cmos 00:03: RTC can wake from S4
[ 0.981277] rtc_cmos 00:03: rtc core: registered rtc_cmos as rtc0
[ 0.981303] rtc_cmos 00:03: alarms up to one month, 242 bytes nvram, hpet irqs
[ 0.981310] intel_pstate: Intel P-state driver initializing
[ 0.981545] ledtrig-cpu: registered to indicate activity on CPUs
[ 0.981905] NET: Registered protocol family 10
[ 0.982287] mip6: Mobile IPv6
[ 0.982290] NET: Registered protocol family 17
[ 0.982294] mpls_gso: MPLS GSO support
[ 0.982537] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input0
[ 0.982906] microcode: sig=0x306a9, pf=0x10, revision=0x1b
[ 0.982992] microcode: Microcode Update Driver: v2.01 <tigran@aivazian.fsnet.co.uk>, Peter Oruba
[ 0.983182] registered taskstats version 1
[ 0.983185] Loading compiled-in X.509 certificates
[ 0.985812] alg: No test for pkcs1pad(rsa,sha256) (pkcs1pad(rsa-generic,sha256))
[ 0.986370] Loaded X.509 cert 'Debian Project: Ben Hutchings: 008a018dca80932630'
[ 0.986405] zswap: loaded using pool lzo/zbud
[ 0.987060] rtc_cmos 00:03: setting system clock to 2017-03-29 11:15:40 UTC (1490786140)
[ 0.987129] PM: Hibernation image not present or could not be loaded.
[ 0.989244] Freeing unused kernel memory: 1392K (ffffffff9991c000 - ffffffff99a78000)
[ 0.989246] Write protecting the kernel read-only data: 12288k
[ 0.990099] Freeing unused kernel memory: 2032K (ffff89c1f1404000 - ffff89c1f1600000)
[ 0.994984] Freeing unused kernel memory: 1252K (ffff89c1f18c7000 - ffff89c1f1a00000)
[ 1.006124] x86/mm: Checked W+X mappings: passed, no W+X pages found.
[ 1.098275] random: systemd-udevd: uninitialized urandom read (16 bytes read)
[ 1.098395] random: systemd-udevd: uninitialized urandom read (16 bytes read)
[ 1.098413] random: systemd-udevd: uninitialized urandom read (16 bytes read)
[ 1.098432] random: systemd-udevd: uninitialized urandom read (16 bytes read)
[ 1.099834] random: udevadm: uninitialized urandom read (16 bytes read)
[ 1.099892] random: udevadm: uninitialized urandom read (16 bytes read)
[ 1.101871] random: udevadm: uninitialized urandom read (16 bytes read)
[ 1.101973] random: udevadm: uninitialized urandom read (16 bytes read)
[ 1.101999] random: udevadm: uninitialized urandom read (16 bytes read)
[ 1.102500] random: udevadm: uninitialized urandom read (16 bytes read)
[ 1.134094] FUJITSU Extended Socket Network Device Driver - version 1.1 - Copyright (c) 2015 FUJITSU LIMITED
[ 1.143568] pps_core: LinuxPPS API ver. 1 registered
[ 1.143570] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it>
[ 1.144936] PTP clock support registered
[ 1.151142] sdhci: Secure Digital Host Controller Interface driver
[ 1.151144] sdhci: Copyright(c) Pierre Ossman
[ 1.151804] ACPI: bus type USB registered
[ 1.151844] usbcore: registered new interface driver usbfs
[ 1.151862] usbcore: registered new interface driver hub
[ 1.151902] usbcore: registered new device driver usb
[ 1.153322] e1000e: Intel(R) PRO/1000 Network Driver - 3.2.6-k
[ 1.153323] e1000e: Copyright(c) 1999 - 2015 Intel Corporation.
[ 1.153520] e1000e 0000:00:19.0: Interrupt Throttling Rate (ints/sec) set to dynamic conservative mode
[ 1.154773] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 1.155395] thermal LNXTHERM:00: registered as thermal_zone0
[ 1.155397] ACPI: Thermal Zone [THM0] (60 C)
[ 1.155925] ehci-pci: EHCI PCI platform driver
[ 1.158423] sdhci-pci 0000:01:00.0: SDHCI controller found [1180:e823] (rev 4)
[ 1.166319] thermal LNXTHERM:01: registered as thermal_zone1
[ 1.166321] ACPI: Thermal Zone [THM1] (27 C)
[ 1.171046] mmc0: SDHCI controller on PCI [0000:01:00.0] using DMA
[ 1.173200] SCSI subsystem initialized
[ 1.176871] AVX version of gcm_enc/dec engaged.
[ 1.176872] AES CTR mode by8 optimization enabled
[ 1.182182] libata version 3.00 loaded.
[ 1.299374] e1000e 0000:00:19.0 0000:00:19.0 (uninitialized): registered PHC clock
[ 1.424656] e1000e 0000:00:19.0 eth0: (PCI Express:2.5GT/s:Width x1) 3c:97:0e:b6:6c:5b
[ 1.424660] e1000e 0000:00:19.0 eth0: Intel(R) PRO/1000 Network Connection
[ 1.424728] e1000e 0000:00:19.0 eth0: MAC: 10, PHY: 11, PBA No: 1000FF-0FF
[ 1.425111] ehci-pci 0000:00:1a.0: EHCI Host Controller
[ 1.425126] ehci-pci 0000:00:1a.0: new USB bus registered, assigned bus number 1
[ 1.425151] ehci-pci 0000:00:1a.0: debug port 2
[ 1.429073] ehci-pci 0000:00:1a.0: cache line size of 64 is not supported
[ 1.429105] ehci-pci 0000:00:1a.0: irq 21, io mem 0xf163e000
[ 1.441467] ehci-pci 0000:00:1a.0: USB 2.0 started, EHCI 1.00
[ 1.441573] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
[ 1.441575] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.441577] usb usb1: Product: EHCI Host Controller
[ 1.441579] usb usb1: Manufacturer: Linux 4.9.0-2-amd64 ehci_hcd
[ 1.441581] usb usb1: SerialNumber: 0000:00:1a.0
[ 1.441940] hub 1-0:1.0: USB hub found
[ 1.441956] hub 1-0:1.0: 3 ports detected
[ 1.442486] ehci-pci 0000:00:1d.0: EHCI Host Controller
[ 1.442494] ehci-pci 0000:00:1d.0: new USB bus registered, assigned bus number 2
[ 1.442512] ehci-pci 0000:00:1d.0: debug port 2
[ 1.446408] ehci-pci 0000:00:1d.0: cache line size of 64 is not supported
[ 1.446430] ehci-pci 0000:00:1d.0: irq 19, io mem 0xf163f000
[ 1.461471] ehci-pci 0000:00:1d.0: USB 2.0 started, EHCI 1.00
[ 1.461540] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002
[ 1.461542] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.461544] usb usb2: Product: EHCI Host Controller
[ 1.461546] usb usb2: Manufacturer: Linux 4.9.0-2-amd64 ehci_hcd
[ 1.461547] usb usb2: SerialNumber: 0000:00:1d.0
[ 1.461885] hub 2-0:1.0: USB hub found
[ 1.461900] hub 2-0:1.0: 3 ports detected
[ 1.462502] xhci_hcd 0000:00:14.0: xHCI Host Controller
[ 1.462514] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 3
[ 1.463632] xhci_hcd 0000:00:14.0: hcc params 0x200071a1 hci version 0x100 quirks 0x0000b930
[ 1.463641] xhci_hcd 0000:00:14.0: cache line size of 64 is not supported
[ 1.463920] usb usb3: New USB device found, idVendor=1d6b, idProduct=0002
[ 1.463924] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.463927] usb usb3: Product: xHCI Host Controller
[ 1.463930] usb usb3: Manufacturer: Linux 4.9.0-2-amd64 xhci-hcd
[ 1.463932] usb usb3: SerialNumber: 0000:00:14.0
[ 1.464215] hub 3-0:1.0: USB hub found
[ 1.464240] hub 3-0:1.0: 4 ports detected
[ 1.464559] xhci_hcd 0000:00:14.0: xHCI Host Controller
[ 1.464564] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 4
[ 1.464761] usb usb4: New USB device found, idVendor=1d6b, idProduct=0003
[ 1.464764] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.464766] usb usb4: Product: xHCI Host Controller
[ 1.464768] usb usb4: Manufacturer: Linux 4.9.0-2-amd64 xhci-hcd
[ 1.464770] usb usb4: SerialNumber: 0000:00:14.0
[ 1.465012] hub 4-0:1.0: USB hub found
[ 1.465032] hub 4-0:1.0: 4 ports detected
[ 1.465552] i801_smbus 0000:00:1f.3: SMBus using PCI interrupt
[ 1.466770] ahci 0000:00:1f.2: version 3.0
[ 1.467071] ahci 0000:00:1f.2: SSS flag set, parallel bus scan disabled
[ 1.477206] ahci 0000:00:1f.2: AHCI 0001.0300 32 slots 6 ports 6 Gbps 0x7 impl SATA mode
[ 1.477210] ahci 0000:00:1f.2: flags: 64bit ncq sntf ilck stag pm led clo pio slum part apst
[ 1.478230] scsi host0: ahci
[ 1.478468] scsi host1: ahci
[ 1.478657] scsi host2: ahci
[ 1.478806] scsi host3: ahci
[ 1.478975] scsi host4: ahci
[ 1.479188] scsi host5: ahci
[ 1.479304] ata1: SATA max UDMA/133 abar m2048@0xf163d000 port 0xf163d100 irq 31
[ 1.479308] ata2: SATA max UDMA/133 abar m2048@0xf163d000 port 0xf163d180 irq 31
[ 1.479312] ata3: SATA max UDMA/133 abar m2048@0xf163d000 port 0xf163d200 irq 31
[ 1.479313] ata4: DUMMY
[ 1.479314] ata5: DUMMY
[ 1.479315] ata6: DUMMY
[ 1.769464] usb 1-1: new high-speed USB device number 2 using ehci-pci
[ 1.789462] usb 2-1: new high-speed USB device number 2 using ehci-pci
[ 1.792405] ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
[ 1.793191] ata1.00: ATA-9: WDC WD10SPCX-08HWST0, 01.01A01, max UDMA/133
[ 1.793194] ata1.00: 1953525168 sectors, multi 0: LBA48 NCQ (depth 31/32), AA
[ 1.793912] ata1.00: configured for UDMA/133
[ 1.794300] scsi 0:0:0:0: Direct-Access ATA WDC WD10SPCX-08H 1A01 PQ: 0 ANSI: 5
[ 1.898212] psmouse serio1: trackpoint: IBM TrackPoint firmware: 0x0e, buttons: 3/3
[ 1.912021] input: TPPS/2 IBM TrackPoint as /devices/platform/i8042/serio1/input/input2
[ 1.918142] usb 1-1: New USB device found, idVendor=8087, idProduct=0024
[ 1.918146] usb 1-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[ 1.918573] hub 1-1:1.0: USB hub found
[ 1.918697] hub 1-1:1.0: 6 ports detected
[ 1.938055] usb 2-1: New USB device found, idVendor=8087, idProduct=0024
[ 1.938058] usb 2-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[ 1.938416] hub 2-1:1.0: USB hub found
[ 1.938562] hub 2-1:1.0: 8 ports detected
[ 1.953468] tsc: Refined TSC clocksource calibration: 2594.106 MHz
[ 1.953478] clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x25647bfab01, max_idle_ns: 440795211785 ns
[ 2.140256] ata2: SATA link down (SStatus 0 SControl 300)
[ 2.205520] usb 1-1.4: new full-speed USB device number 3 using ehci-pci
[ 2.318786] usb 1-1.4: New USB device found, idVendor=0a5c, idProduct=217f
[ 2.318789] usb 1-1.4: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[ 2.318791] usb 1-1.4: Product: Broadcom Bluetooth Device
[ 2.318793] usb 1-1.4: Manufacturer: Broadcom Corp
[ 2.318795] usb 1-1.4: SerialNumber: 7CE9D3B7FC24
[ 2.401499] usb 1-1.6: new high-speed USB device number 4 using ehci-pci
[ 2.456357] ata3: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[ 2.458721] ata3.00: ATA-8: LITEONIT LSS-32L6G-HP, DS51704, max UDMA/133
[ 2.458724] ata3.00: 62533296 sectors, multi 1: LBA48 NCQ (depth 31/32), AA
[ 2.459240] ata3.00: configured for UDMA/133
[ 2.459587] scsi 2:0:0:0: Direct-Access ATA LITEONIT LSS-32L 704 PQ: 0 ANSI: 5
[ 2.494942] sd 0:0:0:0: [sda] 1953525168 512-byte logical blocks: (1.00 TB/932 GiB)
[ 2.494946] sd 0:0:0:0: [sda] 4096-byte physical blocks
[ 2.495045] sd 0:0:0:0: [sda] Write Protect is off
[ 2.495049] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 2.495102] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 2.495307] sd 2:0:0:0: [sdb] 62533296 512-byte logical blocks: (32.0 GB/29.8 GiB)
[ 2.495462] sd 2:0:0:0: [sdb] Write Protect is off
[ 2.495466] sd 2:0:0:0: [sdb] Mode Sense: 00 3a 00 00
[ 2.495512] sd 2:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 2.497568] sdb: sdb1 sdb2 sdb3 sdb5 sdb6 sdb7
[ 2.498448] sd 2:0:0:0: [sdb] Attached SCSI disk
[ 2.501806] random: fast init done
[ 2.517197] usb 1-1.6: New USB device found, idVendor=04f2, idProduct=b2ea
[ 2.517213] usb 1-1.6: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[ 2.517215] usb 1-1.6: Product: Integrated Camera
[ 2.517217] usb 1-1.6: Manufacturer: Chicony Electronics Co., Ltd.
[ 2.647060] sda: sda1 sda2 sda3 sda4 sda5 sda6 sda7 sda8
[ 2.648386] sd 0:0:0:0: [sda] Attached SCSI disk
[ 2.977712] clocksource: Switched to clocksource tsc
[ 3.824984] md: linear personality registered for level -1
[ 3.827852] md: multipath personality registered for level -4
[ 3.830147] md: raid0 personality registered for level 0
[ 3.832814] md: raid1 personality registered for level 1
[ 3.901532] raid6: sse2x1 gen() 5436 MB/s
[ 3.969528] raid6: sse2x1 xor() 5382 MB/s
[ 4.037535] raid6: sse2x2 gen() 10626 MB/s
[ 4.105539] raid6: sse2x2 xor() 7973 MB/s
[ 4.173542] raid6: sse2x4 gen() 13090 MB/s
[ 4.241540] raid6: sse2x4 xor() 9701 MB/s
[ 4.241543] raid6: using algorithm sse2x4 gen() 13090 MB/s
[ 4.241543] raid6: .... xor() 9701 MB/s, rmw enabled
[ 4.241544] raid6: using ssse3x2 recovery algorithm
[ 4.242029] xor: automatically using best checksumming function avx
[ 4.242404] async_tx: api initialized (async)
[ 4.245769] md: raid6 personality registered for level 6
[ 4.245770] md: raid5 personality registered for level 5
[ 4.245771] md: raid4 personality registered for level 4
[ 4.250219] md: raid10 personality registered for level 10
[ 4.266922] Btrfs loaded, crc32c=crc32c-intel
[ 5.031084] PM: Starting manual resume from disk
[ 5.031090] PM: Hibernation image partition 8:2 present
[ 5.031091] PM: Looking for hibernation image.
[ 5.048600] PM: Image not found (code -22)
[ 5.048602] PM: Hibernation image not present or could not be loaded.
[ 5.192815] EXT4-fs (sdb5): mounted filesystem with ordered data mode. Opts: (null)
[ 5.337978] ip_tables: (C) 2000-2006 Netfilter Core Team
[ 5.343983] systemd[1]: systemd 232 running in system mode. (+PAM +AUDIT +SELINUX +IMA +APPARMOR +SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ +LZ4 +SECCOMP +BLKID +ELFUTILS +KMOD +IDN)
[ 5.344207] systemd[1]: Detected architecture x86-64.
[ 5.344390] systemd[1]: Set hostname to <universi-mcbk52>.
[ 5.482730] random: crng init done
[ 5.490490] systemd[1]: transmission-daemon.service: Cannot add dependency job, ignoring: Unit transmission-daemon.service is masked.
[ 5.490522] systemd[1]: hdapsd.service: Cannot add dependency job, ignoring: Unit hdapsd.service is masked.
[ 5.490531] systemd[1]: pkcsslotd.service: Cannot add dependency job, ignoring: Unit pkcsslotd.service is masked.
[ 5.491341] systemd[1]: Started Dispatch Password Requests to Console Directory Watch.
[ 5.491399] systemd[1]: Listening on Syslog Socket.
[ 5.491427] systemd[1]: Listening on LVM2 metadata daemon socket.
[ 5.491452] systemd[1]: Listening on udev Kernel Socket.
[ 5.512242] EXT4-fs (sdb5): re-mounted. Opts: discard,user_xattr,errors=remount-ro
[ 5.527348] lp: driver loaded but no devices found
[ 5.538611] ppdev: user-space parallel port driver
[ 5.549657] RPC: Registered named UNIX socket transport module.
[ 5.549657] RPC: Registered udp transport module.
[ 5.549658] RPC: Registered tcp transport module.
[ 5.549658] RPC: Registered tcp NFSv4.1 backchannel transport module.
[ 5.672275] input: Sleep Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/device:1f/PNP0C09:00/PNP0C0E:00/input/input3
[ 5.672278] ACPI: Sleep Button [SLPB]
[ 5.672285] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[ 5.672444] input: Lid Switch as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/device:1f/PNP0C09:00/PNP0C0D:00/input/input4
[ 5.673031] ACPI: Lid Switch [LID]
[ 5.673093] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input5
[ 5.673095] ACPI: Power Button [PWRF]
[ 5.676878] ACPI Warning: SystemIO range 0x0000000000000528-0x000000000000052F conflicts with OpRegion 0x0000000000000500-0x000000000000057F (\PMIO) (20160831/utaddress-247)
[ 5.676883] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[ 5.676885] ACPI Warning: SystemIO range 0x00000000000004C0-0x00000000000004CF conflicts with OpRegion 0x0000000000000480-0x00000000000004EB (\GPIO) (20160831/utaddress-247)
[ 5.676888] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[ 5.676889] ACPI Warning: SystemIO range 0x00000000000004B0-0x00000000000004BF conflicts with OpRegion 0x0000000000000480-0x00000000000004EB (\GPIO) (20160831/utaddress-247)
[ 5.676892] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[ 5.676893] ACPI Warning: SystemIO range 0x0000000000000480-0x00000000000004AF conflicts with OpRegion 0x0000000000000480-0x00000000000004EB (\GPIO) (20160831/utaddress-247)
[ 5.676895] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[ 5.676896] lpc_ich: Resource conflict(s) found affecting gpio_ich
[ 5.681650] tpm_tis 00:06: 1.2 TPM (device-id 0x0, rev-id 78)
[ 5.692907] [drm] Initialized
[ 5.693915] ACPI: AC Adapter [AC] (on-line)
[ 5.700560] ACPI: Battery Slot [BAT0] (battery absent)
[ 5.700662] ACPI: Battery Slot [BAT1] (battery absent)
[ 5.700697] Non-volatile memory driver v1.3
[ 5.707790] thinkpad_acpi: ThinkPad ACPI Extras v0.25
[ 5.707792] thinkpad_acpi: http://ibm-acpi.sf.net/
[ 5.707792] thinkpad_acpi: ThinkPad BIOS CBET4000 4.5-1437-ge912d933df, EC G2HT35WW-3.22
[ 5.707793] thinkpad_acpi: Lenovo ThinkPad X230, model 23255A9
[ 5.709480] thinkpad_acpi: possible tablet mode switch found; ThinkPad in laptop mode
[ 5.709559] thinkpad_acpi: This ThinkPad has standard ACPI backlight brightness control, supported by the ACPI video driver
[ 5.709559] thinkpad_acpi: Disabling thinkpad-acpi brightness events by default...
[ 5.711365] thinkpad_acpi: Standard ACPI backlight interface available, not loading native one
[ 5.711461] thinkpad_acpi: Console audio control enabled, mode: monitor (read only)
[ 5.713280] input: ThinkPad Extra Buttons as /devices/platform/thinkpad_acpi/input/input6
[ 5.745644] sd 0:0:0:0: Attached scsi generic sg0 type 0
[ 5.752374] sd 2:0:0:0: Attached scsi generic sg1 type 0
[ 5.769667] input: PC Speaker as /devices/platform/pcspkr/input/input7
[ 5.779960] ath: phy0: Killer Wireless card detected
[ 5.781683] tpm tpm0: A TPM error (6) occurred attempting to read a pcr value
[ 5.781729] tpm tpm0: TPM is disabled/deactivated (0x6)
[ 5.791898] ath: phy0: ASPM enabled: 0x43
[ 5.791900] ath: EEPROM regdomain: 0x60
[ 5.791901] ath: EEPROM indicates we should expect a direct regpair map
[ 5.791903] ath: Country alpha2 being used: 00
[ 5.791903] ath: Regpair used: 0x60
[ 5.849961] RAPL PMU: API unit is 2^-32 Joules, 3 fixed counters, 163840 ms ovfl timer
[ 5.849963] RAPL PMU: hw unit of domain pp0-core 2^-16 Joules
[ 5.849963] RAPL PMU: hw unit of domain package 2^-16 Joules
[ 5.849964] RAPL PMU: hw unit of domain pp1-gpu 2^-16 Joules
[ 5.855357] ieee80211 phy0: Selected rate control algorithm 'minstrel_ht'
[ 5.855628] ieee80211 phy0: Atheros AR9300 Rev:3 mem=0xffffb884424c0000, irq=17
[ 6.225829] EXT4-fs (sdb7): mounted filesystem with ordered data mode. Opts: discard,user_xattr
[ 6.234470] Adding 8389628k swap on /dev/sda2. Priority:-1 extents:1 across:8389628k FS
[ 6.340674] iTCO_vendor_support: vendor-support=0
[ 6.342177] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.11
[ 6.342219] iTCO_wdt: Found a Panther Point TCO device (Version=2, TCOBASE=0x0560)
[ 6.342321] iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0)
[ 6.400245] EXT4-fs (sdb3): mounting ext2 file system using the ext4 subsystem
[ 6.402866] EXT4-fs (sdb3): mounted filesystem without journal. Opts: user_xattr
[ 7.299282] media: Linux media interface: v0.10
[ 7.314017] Linux video capture interface: v2.00
[ 7.327855] Bluetooth: Core ver 2.22
[ 7.327880] NET: Registered protocol family 31
[ 7.327881] Bluetooth: HCI device and connection manager initialized
[ 7.327886] Bluetooth: HCI socket layer initialized
[ 7.327889] Bluetooth: L2CAP socket layer initialized
[ 7.327897] Bluetooth: SCO socket layer initialized
[ 7.490261] uvcvideo: Found UVC 1.00 device Integrated Camera (04f2:b2ea)
[ 7.490827] usbcore: registered new interface driver btusb
[ 7.492075] uvcvideo 1-1.6:1.0: Entity type for entity Extension 4 was not initialized!
[ 7.492081] uvcvideo 1-1.6:1.0: Entity type for entity Extension 3 was not initialized!
[ 7.492085] uvcvideo 1-1.6:1.0: Entity type for entity Processing 2 was not initialized!
[ 7.492089] uvcvideo 1-1.6:1.0: Entity type for entity Camera 1 was not initialized!
[ 7.492301] input: Integrated Camera as /devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.6/1-1.6:1.0/input/input8
[ 7.492425] usbcore: registered new interface driver uvcvideo
[ 7.492427] USB Video Class driver (1.1.1)
[ 7.681737] mei_me 0000:00:16.0: wait hw ready failed
[ 7.681790] mei_me 0000:00:16.0: hw_start failed ret = -62
[ 7.681844] mei_me 0000:00:16.0: H_RST is set = 0x80000015
[ 8.159953] EXT4-fs (sda5): mounted filesystem with ordered data mode. Opts: user_xattr
[ 8.284682] EXT4-fs (sdb6): mounted filesystem with ordered data mode. Opts: discard,user_xattr
[ 8.291878] systemd-journald[279]: Received request to flush runtime journal from PID 1
[ 8.685060] EXT4-fs (sda3): mounted filesystem with ordered data mode. Opts: user_xattr
[ 8.728589] EXT4-fs (sda4): mounted filesystem with ordered data mode. Opts: user_xattr
[ 9.330997] EXT4-fs (sda6): mounted filesystem with ordered data mode. Opts: user_xattr
[ 9.549487] EXT4-fs (sda7): mounted filesystem with ordered data mode. Opts: user_xattr
[ 9.697830] mei_me 0000:00:16.0: wait hw ready failed
[ 9.697882] mei_me 0000:00:16.0: hw_start failed ret = -62
[ 9.697939] mei_me 0000:00:16.0: H_RST is set = 0x80000015
[ 9.954088] EXT4-fs (sda8): mounted filesystem with ordered data mode. Opts: user_xattr
[ 10.336915] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
[ 10.336917] Bluetooth: BNEP filters: protocol multicast
[ 10.336920] Bluetooth: BNEP socket layer initialized
[ 10.398118] nfc: nfc_init: NFC Core ver 0.1
[ 10.398138] NET: Registered protocol family 39
[ 11.713904] mei_me 0000:00:16.0: wait hw ready failed
[ 11.713939] mei_me 0000:00:16.0: hw_start failed ret = -62
[ 11.713968] mei_me 0000:00:16.0: reset: reached maximal consecutive resets: disabling the device
[ 11.714014] mei_me 0000:00:16.0: reset failed ret = -19
[ 11.714043] mei_me 0000:00:16.0: link layer initialization failed.
[ 11.714075] mei_me 0000:00:16.0: init hw failure.
[ 11.714196] mei_me 0000:00:16.0: initialization failed.
[ 11.715134] [drm] Memory usable by graphics device = 2048M
[ 11.715137] checking generic (e0000000 410000) vs hw (e0000000 10000000)
[ 11.715138] fb: switching to inteldrmfb from EFI VGA
[ 11.715181] Console: switching to colour dummy device 80x25
[ 11.716179] [drm] Replacing VGA console driver
[ 11.731807] snd_hda_codec_realtek hdaudioC0D0: autoconfig for ALC269VC: line_outs=1 (0x14/0x0/0x0/0x0/0x0) type:speaker
[ 11.731810] snd_hda_codec_realtek hdaudioC0D0: speaker_outs=0 (0x0/0x0/0x0/0x0/0x0)
[ 11.731811] snd_hda_codec_realtek hdaudioC0D0: hp_outs=2 (0x15/0x1b/0x0/0x0/0x0)
[ 11.731812] snd_hda_codec_realtek hdaudioC0D0: mono: mono_out=0x0
[ 11.731813] snd_hda_codec_realtek hdaudioC0D0: inputs:
[ 11.731815] snd_hda_codec_realtek hdaudioC0D0: Mic=0x18
[ 11.731816] snd_hda_codec_realtek hdaudioC0D0: Dock Mic=0x19
[ 11.731817] snd_hda_codec_realtek hdaudioC0D0: Internal Mic=0x12
[ 11.773960] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
[ 11.773962] [drm] Driver supports precise vblank timestamp query.
[ 11.774233] vgaarb: device changed decodes: PCI:0000:00:02.0,olddecodes=io+mem,decodes=io+mem:owns=io+mem
[ 12.016350] ACPI: Video Device [GFX0] (multi-head: yes rom: no post: no)
[ 12.017955] acpi device:03: registered as cooling_device4
[ 12.018032] input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:00/input/input14
[ 12.019149] snd_hda_intel 0000:00:1b.0: bound 0000:00:02.0 (ops i915_audio_component_bind_ops [i915])
[ 12.019156] [drm] Initialized i915 1.6.0 20160919 for 0000:00:02.0 on minor 0
[ 12.022812] input: HDA Digital PCBeep as /devices/pci0000:00/0000:00:1b.0/sound/card0/input9
[ 12.024245] input: HDA Intel PCH Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input10
[ 12.024329] input: HDA Intel PCH Dock Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input11
[ 12.024413] input: HDA Intel PCH Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card0/input12
[ 12.025282] input: HDA Intel PCH Dock Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card0/input13
[ 12.025358] input: HDA Intel PCH HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:1b.0/sound/card0/input15
[ 12.025425] input: HDA Intel PCH HDMI/DP,pcm=7 as /devices/pci0000:00/0000:00:1b.0/sound/card0/input16
[ 12.025491] input: HDA Intel PCH HDMI/DP,pcm=8 as /devices/pci0000:00/0000:00:1b.0/sound/card0/input17
[ 12.071074] intel_rapl: Found RAPL domain package
[ 12.071075] intel_rapl: Found RAPL domain core
[ 12.071076] intel_rapl: Found RAPL domain uncore
[ 12.207631] fbcon: inteldrmfb (fb0) is primary device
[ 12.433577] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 12.690088] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 12.699918] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
[ 12.711100] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
[ 12.727561] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
[ 13.019477] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
[ 13.394071] ip6_tables: (C) 2000-2006 Netfilter Core Team
[ 13.407628] Ebtables v2.0 registered
[ 13.424263] Console: switching to colour frame buffer device 172x48
[ 13.443392] i915 0000:00:02.0: fb0: inteldrmfb frame buffer device
[ 16.830372] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
[ 16.879657] wlan0: authenticate with 5c:0e:8b:41:a3:05
[ 16.890618] wlan0: send auth to 5c:0e:8b:41:a3:05 (try 1/3)
[ 16.894795] wlan0: authenticated
[ 16.898154] wlan0: associate with 5c:0e:8b:41:a3:05 (try 1/3)
[ 16.925321] wlan0: RX AssocResp from 5c:0e:8b:41:a3:05 (capab=0x1 status=0 aid=1)
[ 16.925393] wlan0: associated
[ 16.925435] IPv6: ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
[ 16.930639] ath: EEPROM regdomain: 0x809c
[ 16.930640] ath: EEPROM indicates we should expect a country code
[ 16.930641] ath: doing EEPROM country->regdmn map search
[ 16.930641] ath: country maps to regdmn code: 0x52
[ 16.930642] ath: Country alpha2 being used: CN
[ 16.930642] ath: Regpair used: 0x52
[ 16.930643] ath: regdomain 0x809c dynamically updated by country IE
[ 29.950916] Bluetooth: RFCOMM TTY layer initialized
[ 29.950925] Bluetooth: RFCOMM socket layer initialized
[ 29.950931] Bluetooth: RFCOMM ver 1.11