blob: 29c83a0a6e6f43041d859ea2fb5ac51c1970a88b [file] [log] [blame]
[ 0.000000] Linux version 4.16.6-1-ARCH (builduser@heftig-20360) (gcc version 7.3.1 20180406 (GCC)) #1 SMP PREEMPT Mon Apr 30 12:30:03 UTC 2018
[ 0.000000] Command line: BOOT_IMAGE=/boot/vmlinuz-linux root=UUID=5f9bc885-0fa0-49db-9930-f8a06bb93b86 rw acpi_backlight=video
[ 0.000000] KERNEL supported cpus:
[ 0.000000] Intel GenuineIntel
[ 0.000000] AMD AuthenticAMD
[ 0.000000] Centaur CentaurHauls
[ 0.000000] x86/fpu: x87 FPU will use FXSAVE
[ 0.000000] e820: BIOS-provided physical RAM map:
[ 0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009fbff] usable
[ 0.000000] BIOS-e820: [mem 0x000000000009fc00-0x000000000009ffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000000f0000-0x00000000000fffff] reserved
[ 0.000000] BIOS-e820: [mem 0x0000000000100000-0x00000000bf70dfff] usable
[ 0.000000] BIOS-e820: [mem 0x00000000bf70e000-0x00000000bfffffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000c1c00000-0x00000000c3ffffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000d0000000-0x00000000efffffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fed00000-0x00000000fedfffff] reserved
[ 0.000000] BIOS-e820: [mem 0x0000000100000000-0x0000000133ffffff] usable
[ 0.000000] NX (Execute Disable) protection: active
[ 0.000000] SMBIOS 2.7 present.
[ 0.000000] DMI: LENOVO 3626BJ3/3626BJ3, BIOS CBET4000 4.7-994-ga940e384b6 05/03/2018
[ 0.000000] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
[ 0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable
[ 0.000000] e820: last_pfn = 0x134000 max_arch_pfn = 0x400000000
[ 0.000000] MTRR default type: write-back
[ 0.000000] MTRR fixed ranges enabled:
[ 0.000000] 00000-9FFFF write-back
[ 0.000000] A0000-BFFFF uncachable
[ 0.000000] C0000-FFFFF write-back
[ 0.000000] MTRR variable ranges enabled:
[ 0.000000] 0 base 0BF800000 mask FFF800000 uncachable
[ 0.000000] 1 base 0C0000000 mask FF0000000 uncachable
[ 0.000000] 2 base 0D0000000 mask FF0000000 write-combining
[ 0.000000] 3 base 0E0000000 mask FE0000000 uncachable
[ 0.000000] 4 disabled
[ 0.000000] 5 disabled
[ 0.000000] 6 disabled
[ 0.000000] 7 disabled
[ 0.000000] x86/PAT: Configuration [0-7]: WB WC UC- UC WB WP UC- WT
[ 0.000000] e820: last_pfn = 0xbf70e max_arch_pfn = 0x400000000
[ 0.000000] Scanning 1 areas for low memory corruption
[ 0.000000] Base memory trampoline at [ (ptrval)] 99000 size 24576
[ 0.000000] BRK [0x1e64f000, 0x1e64ffff] PGTABLE
[ 0.000000] BRK [0x1e650000, 0x1e650fff] PGTABLE
[ 0.000000] BRK [0x1e651000, 0x1e651fff] PGTABLE
[ 0.000000] BRK [0x1e652000, 0x1e652fff] PGTABLE
[ 0.000000] BRK [0x1e653000, 0x1e653fff] PGTABLE
[ 0.000000] RAMDISK: [mem 0x36e79000-0x37733fff]
[ 0.000000] ACPI: Early table checksum verification disabled
[ 0.000000] ACPI: RSDP 0x00000000000F66B0 000024 (v02 CORE )
[ 0.000000] ACPI: XSDT 0x00000000BF7220E0 000054 (v01 CORE COREBOOT 00000000 CORE 00000000)
[ 0.000000] ACPI: FACP 0x00000000BF725A30 0000F4 (v04 CORE COREBOOT 00000000 CORE 00000000)
[ 0.000000] ACPI: DSDT 0x00000000BF722280 0037A8 (v03 COREv4 COREBOOT 20130325 INTL 20161222)
[ 0.000000] ACPI: FACS 0x00000000BF722240 000040
[ 0.000000] ACPI: FACS 0x00000000BF722240 000040
[ 0.000000] ACPI: SSDT 0x00000000BF725B30 0012DC (v02 CORE COREBOOT 0000002A CORE 0000002A)
[ 0.000000] ACPI: MCFG 0x00000000BF726E10 00003C (v01 CORE COREBOOT 00000000 CORE 00000000)
[ 0.000000] ACPI: TCPA 0x00000000BF726E50 000032 (v02 CORE COREBOOT 00000000 CORE 00000000)
[ 0.000000] ACPI: APIC 0x00000000BF726E90 000084 (v01 CORE COREBOOT 00000000 CORE 00000000)
[ 0.000000] ACPI: HPET 0x00000000BF728F20 000038 (v01 CORE COREBOOT 00000000 CORE 00000000)
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] No NUMA configuration found
[ 0.000000] Faking a node at [mem 0x0000000000000000-0x0000000133ffffff]
[ 0.000000] NODE_DATA(0) allocated [mem 0x133ff9000-0x133ffcfff]
[ 0.000000] tsc: Fast TSC calibration using PIT
[ 0.000000] Zone ranges:
[ 0.000000] DMA [mem 0x0000000000001000-0x0000000000ffffff]
[ 0.000000] DMA32 [mem 0x0000000001000000-0x00000000ffffffff]
[ 0.000000] Normal [mem 0x0000000100000000-0x0000000133ffffff]
[ 0.000000] Device empty
[ 0.000000] Movable zone start for each node
[ 0.000000] Early memory node ranges
[ 0.000000] node 0: [mem 0x0000000000001000-0x000000000009efff]
[ 0.000000] node 0: [mem 0x0000000000100000-0x00000000bf70dfff]
[ 0.000000] node 0: [mem 0x0000000100000000-0x0000000133ffffff]
[ 0.000000] Initmem setup node 0 [mem 0x0000000000001000-0x0000000133ffffff]
[ 0.000000] On node 0 totalpages: 997036
[ 0.000000] DMA zone: 64 pages used for memmap
[ 0.000000] DMA zone: 21 pages reserved
[ 0.000000] DMA zone: 3998 pages, LIFO batch:0
[ 0.000000] DMA32 zone: 12189 pages used for memmap
[ 0.000000] DMA32 zone: 780046 pages, LIFO batch:31
[ 0.000000] Normal zone: 3328 pages used for memmap
[ 0.000000] Normal zone: 212992 pages, LIFO batch:31
[ 0.000000] Reserved but unavailable: 98 pages
[ 0.000000] Reserving Intel graphics memory at [mem 0xc2000000-0xc3ffffff]
[ 0.000000] ACPI: PM-Timer IO Port: 0x508
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x02] high edge lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x03] high edge lint[0x1])
[ 0.000000] IOAPIC[0]: apic_id 1, version 32, address 0xfec00000, GSI 0-23
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[ 0.000000] ACPI: IRQ0 used by override.
[ 0.000000] ACPI: IRQ9 used by override.
[ 0.000000] Using ACPI (MADT) for SMP configuration information
[ 0.000000] ACPI: HPET id: 0x8086a701 base: 0xfed00000
[ 0.000000] smpboot: Allowing 4 CPUs, 0 hotplug CPUs
[ 0.000000] PM: Registered nosave memory: [mem 0x00000000-0x00000fff]
[ 0.000000] PM: Registered nosave memory: [mem 0x0009f000-0x0009ffff]
[ 0.000000] PM: Registered nosave memory: [mem 0x000a0000-0x000effff]
[ 0.000000] PM: Registered nosave memory: [mem 0x000f0000-0x000fffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xbf70e000-0xbfffffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xc0000000-0xc1bfffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xc1c00000-0xc3ffffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xc4000000-0xcfffffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xd0000000-0xefffffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xf0000000-0xfecfffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfed00000-0xfedfffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfee00000-0xffffffff]
[ 0.000000] e820: [mem 0xf0000000-0xfecfffff] available for PCI devices
[ 0.000000] Booting paravirtualized kernel on bare hardware
[ 0.000000] clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 6370452778343963 ns
[ 0.000000] random: get_random_bytes called from start_kernel+0x96/0x4dc with crng_init=0
[ 0.000000] setup_percpu: NR_CPUS:320 nr_cpumask_bits:320 nr_cpu_ids:4 nr_node_ids:1
[ 0.000000] percpu: Embedded 46 pages/cpu @ (ptrval) s151552 r8192 d28672 u524288
[ 0.000000] pcpu-alloc: s151552 r8192 d28672 u524288 alloc=1*2097152
[ 0.000000] pcpu-alloc: [0] 0 1 2 3
[ 0.000000] Built 1 zonelists, mobility grouping on. Total pages: 981434
[ 0.000000] Policy zone: Normal
[ 0.000000] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-linux root=UUID=5f9bc885-0fa0-49db-9930-f8a06bb93b86 rw acpi_backlight=video
[ 0.000000] Calgary: detecting Calgary via BIOS EBDA area
[ 0.000000] Calgary: Unable to locate Rio Grande table in EBDA - bailing!
[ 0.000000] Memory: 3825972K/3988144K available (10252K kernel code, 1264K rwdata, 3372K rodata, 1464K init, 640K bss, 162172K reserved, 0K cma-reserved)
[ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
[ 0.000000] Kernel/User page tables isolation: enabled
[ 0.000000] ftrace: allocating 31750 entries in 125 pages
[ 0.000000] Preemptible hierarchical RCU implementation.
[ 0.000000] CONFIG_RCU_FANOUT set to non-default value of 32
[ 0.000000] RCU dyntick-idle grace-period acceleration is enabled.
[ 0.000000] RCU restricting CPUs from NR_CPUS=320 to nr_cpu_ids=4.
[ 0.000000] RCU priority boosting: priority 1 delay 500 ms.
[ 0.000000] Tasks RCU enabled.
[ 0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=4
[ 0.000000] NR_IRQS: 20736, nr_irqs: 456, preallocated irqs: 16
[ 0.000000] Offload RCU callbacks from CPUs: .
[ 0.000000] Console: colour VGA+ 80x25
[ 0.000000] console [tty0] enabled
[ 0.000000] ACPI: Core revision 20180105
[ 0.000000] ACPI: 2 ACPI AML tables successfully acquired and loaded
[ 0.000000] clocksource: hpet: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 133484882848 ns
[ 0.000000] hpet clockevent registered
[ 0.000000] APIC: Switch to symmetric I/O mode setup
[ 0.000000] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[ 0.016666] tsc: Fast TSC calibration using PIT
[ 0.019999] tsc: Detected 2127.998 MHz processor
[ 0.019999] clocksource: tsc-early: mask: 0xffffffffffffffff max_cycles: 0x1eac813fa53, max_idle_ns: 440795210049 ns
[ 0.019999] Calibrating delay loop (skipped), value calculated using timer frequency.. 4257.32 BogoMIPS (lpj=7093326)
[ 0.019999] pid_max: default: 32768 minimum: 301
[ 0.019999] Security Framework initialized
[ 0.019999] Yama: becoming mindful.
[ 0.019999] Dentry cache hash table entries: 524288 (order: 10, 4194304 bytes)
[ 0.019999] Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes)
[ 0.019999] Mount-cache hash table entries: 8192 (order: 4, 65536 bytes)
[ 0.019999] Mountpoint-cache hash table entries: 8192 (order: 4, 65536 bytes)
[ 0.019999] CPU: Physical Processor ID: 0
[ 0.019999] CPU: Processor Core ID: 0
[ 0.019999] mce: CPU supports 9 MCE banks
[ 0.019999] CPU0: Thermal monitoring enabled (TM1)
[ 0.019999] process: using mwait in idle threads
[ 0.019999] Last level iTLB entries: 4KB 512, 2MB 7, 4MB 7
[ 0.019999] Last level dTLB entries: 4KB 512, 2MB 32, 4MB 32, 1GB 0
[ 0.019999] Spectre V2 : Mitigation: Full generic retpoline
[ 0.019999] Freeing SMP alternatives memory: 24K
[ 0.026666] smpboot: CPU0: Intel(R) Core(TM) i3 CPU M 330 @ 2.13GHz (family: 0x6, model: 0x25, stepping: 0x2)
[ 0.036677] Performance Events: PEBS fmt1+, Westmere events, 16-deep LBR, Intel PMU driver.
[ 0.036700] core: CPUID marked event: 'bus cycles' unavailable
[ 0.036703] ... version: 3
[ 0.036704] ... bit width: 48
[ 0.036705] ... generic registers: 4
[ 0.036706] ... value mask: 0000ffffffffffff
[ 0.036707] ... max period: 000000007fffffff
[ 0.036707] ... fixed-purpose events: 3
[ 0.036708] ... event mask: 000000070000000f
[ 0.043338] Hierarchical SRCU implementation.
[ 0.063487] NMI watchdog: Enabled. Permanently consumes one hw-PMU counter.
[ 0.070003] smp: Bringing up secondary CPUs ...
[ 0.100021] x86: Booting SMP configuration:
[ 0.100023] .... node #0, CPUs: #1 #2 #3
[ 0.162247] smp: Brought up 1 node, 4 CPUs
[ 0.162247] smpboot: Max logical packages: 1
[ 0.162247] smpboot: Total of 4 processors activated (17030.31 BogoMIPS)
[ 0.163728] devtmpfs: initialized
[ 0.163728] x86/mm: Memory block size: 128MB
[ 0.163920] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 6370867519511994 ns
[ 0.163920] futex hash table entries: 1024 (order: 4, 65536 bytes)
[ 0.163920] pinctrl core: initialized pinctrl subsystem
[ 0.163920] RTC time: 17:44:39, date: 05/03/18
[ 0.163920] NET: Registered protocol family 16
[ 0.163920] cpuidle: using governor ladder
[ 0.166674] cpuidle: using governor menu
[ 0.166722] ACPI: bus type PCI registered
[ 0.166724] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
[ 0.166820] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
[ 0.166824] PCI: MMCONFIG at [mem 0xe0000000-0xefffffff] reserved in E820
[ 0.166843] PCI: Using configuration type 1 for base access
[ 0.170057] HugeTLB registered 2.00 MiB page size, pre-allocated 0 pages
[ 0.170121] ACPI: Added _OSI(Module Device)
[ 0.170122] ACPI: Added _OSI(Processor Device)
[ 0.170124] ACPI: Added _OSI(3.0 _SCP Extensions)
[ 0.170125] ACPI: Added _OSI(Processor Aggregator Device)
[ 0.170279] ACPI: Executed 1 blocks of module-level executable AML code
[ 0.175802] ACPI: EC: EC started
[ 0.175803] ACPI: EC: interrupt blocked
[ 0.175926] ACPI: \_SB_.PCI0.LPCB.EC__: Used as first EC
[ 0.175929] ACPI: \_SB_.PCI0.LPCB.EC__: GPE=0x11, EC_CMD/EC_SC=0x66, EC_DATA=0x62
[ 0.175931] ACPI: \_SB_.PCI0.LPCB.EC__: Used as boot DSDT EC to handle transactions
[ 0.175931] ACPI: Interpreter enabled
[ 0.175960] ACPI: (supports S0 S3 S4 S5)
[ 0.175962] ACPI: Using IOAPIC for interrupt routing
[ 0.175991] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
[ 0.176216] ACPI: Enabled 2 GPEs in block 00 to 3F
[ 0.182412] acpi ACPI0003:01: ACPI dock station (docks/bays count: 1)
[ 0.182473] ACPI: Power Resource [FPWR] (off)
[ 0.183087] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
[ 0.183093] acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI]
[ 0.183194] acpi PNP0A08:00: _OSC: OS now controls [PCIeHotplug PME AER PCIeCapability]
[ 0.183353] acpi PNP0A08:00: ignoring host bridge window [mem 0x000c4000-0x000c7fff window] (conflicts with Video ROM [mem 0x000c0000-0x000c6bff])
[ 0.183600] PCI host bridge to bus 0000:00
[ 0.183603] pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7 window]
[ 0.183605] pci_bus 0000:00: root bus resource [io 0x0d00-0xffff window]
[ 0.183607] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff window]
[ 0.183608] pci_bus 0000:00: root bus resource [mem 0x000c0000-0x000c3fff window]
[ 0.183610] pci_bus 0000:00: root bus resource [mem 0x000c8000-0x000cbfff window]
[ 0.183612] pci_bus 0000:00: root bus resource [mem 0x000cc000-0x000cffff window]
[ 0.183613] pci_bus 0000:00: root bus resource [mem 0x000d0000-0x000d3fff window]
[ 0.183615] pci_bus 0000:00: root bus resource [mem 0x000d4000-0x000d7fff window]
[ 0.183617] pci_bus 0000:00: root bus resource [mem 0x000d8000-0x000dbfff window]
[ 0.183619] pci_bus 0000:00: root bus resource [mem 0x000dc000-0x000dffff window]
[ 0.183620] pci_bus 0000:00: root bus resource [mem 0x000e0000-0x000e3fff window]
[ 0.183622] pci_bus 0000:00: root bus resource [mem 0x000e4000-0x000e7fff window]
[ 0.183624] pci_bus 0000:00: root bus resource [mem 0x000e8000-0x000ebfff window]
[ 0.183625] pci_bus 0000:00: root bus resource [mem 0x000ec000-0x000effff window]
[ 0.183627] pci_bus 0000:00: root bus resource [mem 0x000f0000-0x000fffff window]
[ 0.183629] pci_bus 0000:00: root bus resource [mem 0xc4000000-0xfebfffff window]
[ 0.183631] pci_bus 0000:00: root bus resource [mem 0xfed40000-0xfed44fff window]
[ 0.183633] pci_bus 0000:00: root bus resource [bus 00-ff]
[ 0.183644] pci 0000:00:00.0: [8086:0044] type 00 class 0x060000
[ 0.183671] DMAR: Disabling batched IOTLB flush on Ironlake
[ 0.183772] pci 0000:00:01.0: [8086:0045] type 01 class 0x060400
[ 0.183813] pci 0000:00:01.0: PME# supported from D0 D3hot D3cold
[ 0.183900] pci 0000:00:02.0: [8086:0046] type 00 class 0x030000
[ 0.183913] pci 0000:00:02.0: reg 0x10: [mem 0xcf800000-0xcfbfffff 64bit]
[ 0.183920] pci 0000:00:02.0: reg 0x18: [mem 0xd0000000-0xdfffffff 64bit pref]
[ 0.183925] pci 0000:00:02.0: reg 0x20: [io 0x1840-0x1847]
[ 0.184063] pci 0000:00:16.0: [8086:3b64] type 00 class 0x078000
[ 0.184094] pci 0000:00:16.0: reg 0x10: [mem 0xcfd2a000-0xcfd2a00f 64bit]
[ 0.184185] pci 0000:00:16.0: PME# supported from D0 D3hot D3cold
[ 0.184289] pci 0000:00:19.0: [8086:10ea] type 00 class 0x020000
[ 0.184310] pci 0000:00:19.0: reg 0x10: [mem 0xcfd00000-0xcfd1ffff]
[ 0.184318] pci 0000:00:19.0: reg 0x14: [mem 0xcfd24000-0xcfd24fff]
[ 0.184327] pci 0000:00:19.0: reg 0x18: [io 0x1800-0x181f]
[ 0.184390] pci 0000:00:19.0: PME# supported from D0 D3hot D3cold
[ 0.184480] pci 0000:00:1a.0: [8086:3b3c] type 00 class 0x0c0320
[ 0.184503] pci 0000:00:1a.0: reg 0x10: [mem 0xcfd27000-0xcfd273ff]
[ 0.184588] pci 0000:00:1a.0: PME# supported from D0 D3hot D3cold
[ 0.184687] pci 0000:00:1b.0: [8086:3b56] type 00 class 0x040300
[ 0.184710] pci 0000:00:1b.0: reg 0x10: [mem 0xcfd20000-0xcfd23fff 64bit]
[ 0.184784] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
[ 0.184886] pci 0000:00:1c.0: [8086:3b42] type 01 class 0x060400
[ 0.184955] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
[ 0.185059] pci 0000:00:1c.1: [8086:3b44] type 01 class 0x060400
[ 0.185129] pci 0000:00:1c.1: PME# supported from D0 D3hot D3cold
[ 0.185232] pci 0000:00:1c.3: [8086:3b48] type 01 class 0x060400
[ 0.185300] pci 0000:00:1c.3: PME# supported from D0 D3hot D3cold
[ 0.185402] pci 0000:00:1c.4: [8086:3b4a] type 01 class 0x060400
[ 0.185477] pci 0000:00:1c.4: PME# supported from D0 D3hot D3cold
[ 0.185583] pci 0000:00:1d.0: [8086:3b34] type 00 class 0x0c0320
[ 0.185606] pci 0000:00:1d.0: reg 0x10: [mem 0xcfd28000-0xcfd283ff]
[ 0.185690] pci 0000:00:1d.0: PME# supported from D0 D3hot D3cold
[ 0.185787] pci 0000:00:1e.0: [8086:2448] type 01 class 0x060401
[ 0.185916] pci 0000:00:1f.0: [8086:3b07] type 00 class 0x060100
[ 0.186113] pci 0000:00:1f.2: [8086:3b2f] type 00 class 0x010601
[ 0.186139] pci 0000:00:1f.2: reg 0x10: [io 0x1848-0x184f]
[ 0.186149] pci 0000:00:1f.2: reg 0x14: [io 0x1858-0x185b]
[ 0.186158] pci 0000:00:1f.2: reg 0x18: [io 0x1850-0x1857]
[ 0.186169] pci 0000:00:1f.2: reg 0x1c: [io 0x185c-0x185f]
[ 0.186179] pci 0000:00:1f.2: reg 0x20: [io 0x1820-0x183f]
[ 0.186189] pci 0000:00:1f.2: reg 0x24: [mem 0xcfd26000-0xcfd267ff]
[ 0.186245] pci 0000:00:1f.2: PME# supported from D3hot
[ 0.186338] pci 0000:00:1f.3: [8086:3b30] type 00 class 0x0c0500
[ 0.186358] pci 0000:00:1f.3: reg 0x10: [mem 0xcfd29000-0xcfd290ff 64bit]
[ 0.186378] pci 0000:00:1f.3: reg 0x20: [io 0x0400-0x041f]
[ 0.186490] pci 0000:00:1f.6: [8086:3b32] type 00 class 0x118000
[ 0.186516] pci 0000:00:1f.6: reg 0x10: [mem 0xcfd25000-0xcfd25fff 64bit]
[ 0.186696] pci 0000:00:01.0: PCI bridge to [bus 01]
[ 0.186743] pci 0000:00:1c.0: PCI bridge to [bus 02]
[ 0.186792] pci 0000:00:1c.1: PCI bridge to [bus 03]
[ 0.186881] acpiphp: Slot [1] registered
[ 0.186887] pci 0000:00:1c.3: PCI bridge to [bus 04]
[ 0.186955] pci 0000:05:00.0: [168c:002a] type 00 class 0x028000
[ 0.186991] pci 0000:05:00.0: reg 0x10: [mem 0xcfc00000-0xcfc0ffff 64bit]
[ 0.187125] pci 0000:05:00.0: supports D1
[ 0.187127] pci 0000:05:00.0: PME# supported from D0 D1 D3hot
[ 0.187196] pci 0000:05:00.0: disabling ASPM on pre-1.1 PCIe device. You can enable it with 'pcie_aspm=force'
[ 0.187207] pci 0000:00:1c.4: PCI bridge to [bus 05]
[ 0.187213] pci 0000:00:1c.4: bridge window [mem 0xcfc00000-0xcfcfffff]
[ 0.187284] pci 0000:00:1e.0: PCI bridge to [bus 06] (subtractive decode)
[ 0.187293] pci 0000:00:1e.0: bridge window [io 0x0000-0x0cf7 window] (subtractive decode)
[ 0.187295] pci 0000:00:1e.0: bridge window [io 0x0d00-0xffff window] (subtractive decode)
[ 0.187297] pci 0000:00:1e.0: bridge window [mem 0x000a0000-0x000bffff window] (subtractive decode)
[ 0.187298] pci 0000:00:1e.0: bridge window [mem 0x000c0000-0x000c3fff window] (subtractive decode)
[ 0.187300] pci 0000:00:1e.0: bridge window [mem 0x000c8000-0x000cbfff window] (subtractive decode)
[ 0.187302] pci 0000:00:1e.0: bridge window [mem 0x000cc000-0x000cffff window] (subtractive decode)
[ 0.187304] pci 0000:00:1e.0: bridge window [mem 0x000d0000-0x000d3fff window] (subtractive decode)
[ 0.187306] pci 0000:00:1e.0: bridge window [mem 0x000d4000-0x000d7fff window] (subtractive decode)
[ 0.187307] pci 0000:00:1e.0: bridge window [mem 0x000d8000-0x000dbfff window] (subtractive decode)
[ 0.187309] pci 0000:00:1e.0: bridge window [mem 0x000dc000-0x000dffff window] (subtractive decode)
[ 0.187311] pci 0000:00:1e.0: bridge window [mem 0x000e0000-0x000e3fff window] (subtractive decode)
[ 0.187313] pci 0000:00:1e.0: bridge window [mem 0x000e4000-0x000e7fff window] (subtractive decode)
[ 0.187314] pci 0000:00:1e.0: bridge window [mem 0x000e8000-0x000ebfff window] (subtractive decode)
[ 0.187316] pci 0000:00:1e.0: bridge window [mem 0x000ec000-0x000effff window] (subtractive decode)
[ 0.187318] pci 0000:00:1e.0: bridge window [mem 0x000f0000-0x000fffff window] (subtractive decode)
[ 0.187320] pci 0000:00:1e.0: bridge window [mem 0xc4000000-0xfebfffff window] (subtractive decode)
[ 0.187321] pci 0000:00:1e.0: bridge window [mem 0xfed40000-0xfed44fff window] (subtractive decode)
[ 0.187522] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 10 *11 12 14 15)
[ 0.187625] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 10 *11 12 14 15)
[ 0.187721] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 7 10 *11 12 14 15)
[ 0.187816] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 10 *11 12 14 15)
[ 0.187910] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 10 *11 12 14 15)
[ 0.188004] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 10 *11 12 14 15)
[ 0.188098] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 7 10 *11 12 14 15)
[ 0.188192] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 7 10 *11 12 14 15)
[ 0.189318] ACPI: PCI Root Bridge [UNCR] (domain 0000 [bus ff])
[ 0.189323] acpi PNP0A03:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI]
[ 0.189329] acpi PNP0A03:00: _OSC failed (AE_NOT_FOUND); disabling ASPM
[ 0.189396] PCI host bridge to bus 0000:ff
[ 0.189399] pci_bus 0000:ff: busn_res: can not insert [bus ff] under domain [bus 00-ff] (conflicts with (null) [bus 00-ff])
[ 0.189401] pci_bus 0000:ff: root bus resource [bus ff]
[ 0.189408] pci 0000:ff:00.0: [8086:2c62] type 00 class 0x060000
[ 0.189466] pci 0000:ff:00.1: [8086:2d01] type 00 class 0x060000
[ 0.189530] pci 0000:ff:02.0: [8086:2d10] type 00 class 0x060000
[ 0.189584] pci 0000:ff:02.1: [8086:2d11] type 00 class 0x060000
[ 0.189639] pci 0000:ff:02.2: [8086:2d12] type 00 class 0x060000
[ 0.189695] pci 0000:ff:02.3: [8086:2d13] type 00 class 0x060000
[ 0.190208] ACPI: EC: interrupt unblocked
[ 0.190215] ACPI: EC: event unblocked
[ 0.190221] ACPI: \_SB_.PCI0.LPCB.EC__: GPE=0x11, EC_CMD/EC_SC=0x66, EC_DATA=0x62
[ 0.190223] ACPI: \_SB_.PCI0.LPCB.EC__: Used as boot DSDT EC to handle transactions and events
[ 0.190320] pci 0000:00:02.0: vgaarb: setting as boot VGA device
[ 0.190320] pci 0000:00:02.0: vgaarb: VGA device added: decodes=io+mem,owns=io+mem,locks=none
[ 0.190320] pci 0000:00:02.0: vgaarb: bridge control possible
[ 0.190320] vgaarb: loaded
[ 0.190320] EDAC MC: Ver: 3.0.0
[ 0.190320] PCI: Using ACPI for IRQ routing
[ 0.199810] PCI: pci_cache_line_size set to 64 bytes
[ 0.199869] e820: reserve RAM buffer [mem 0x0009fc00-0x0009ffff]
[ 0.199871] e820: reserve RAM buffer [mem 0xbf70e000-0xbfffffff]
[ 0.200005] NetLabel: Initializing
[ 0.200006] NetLabel: domain hash size = 128
[ 0.200007] NetLabel: protocols = UNLABELED CIPSOv4 CALIPSO
[ 0.200028] NetLabel: unlabeled traffic allowed by default
[ 0.200047] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0, 0, 0, 0, 0
[ 0.200055] hpet0: 8 comparators, 64-bit 14.318180 MHz counter
[ 0.204361] clocksource: Switched to clocksource tsc-early
[ 0.218819] VFS: Disk quotas dquot_6.6.0
[ 0.218843] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[ 0.218955] pnp: PnP ACPI init
[ 0.219136] system 00:00: [mem 0xfed1c000-0xfed1ffff] has been reserved
[ 0.219139] system 00:00: [mem 0xfed10000-0xfed17fff] has been reserved
[ 0.219141] system 00:00: [mem 0xfed18000-0xfed18fff] has been reserved
[ 0.219143] system 00:00: [mem 0xfed19000-0xfed19fff] has been reserved
[ 0.219146] system 00:00: [mem 0xe0000000-0xe3ffffff] has been reserved
[ 0.219148] system 00:00: [mem 0xfed20000-0xfed3ffff] has been reserved
[ 0.219150] system 00:00: [mem 0xfed40000-0xfed44fff] has been reserved
[ 0.219152] system 00:00: [mem 0xfed45000-0xfed8ffff] has been reserved
[ 0.219154] system 00:00: [mem 0x20000000-0x201fffff] could not be reserved
[ 0.219157] system 00:00: [mem 0x40000000-0x401fffff] could not be reserved
[ 0.219165] system 00:00: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.219870] system 00:01: [mem 0xfed00000-0xfed003ff] has been reserved
[ 0.219877] system 00:01: Plug and Play ACPI device, IDs PNP0103 PNP0c01 (active)
[ 0.219938] system 00:02: [io 0x0500-0x057f] has been reserved
[ 0.219941] system 00:02: [io 0x0480-0x04bf] has been reserved
[ 0.219946] system 00:02: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.219974] pnp 00:03: Plug and Play ACPI device, IDs PNP0b00 (active)
[ 0.220025] pnp 00:04: Plug and Play ACPI device, IDs PNP0303 PNP030b (active)
[ 0.220068] pnp 00:05: Plug and Play ACPI device, IDs PNP0f13 (active)
[ 0.220222] pnp: PnP ACPI: found 6 devices
[ 0.226397] clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns
[ 0.226445] pci 0000:00:01.0: PCI bridge to [bus 01]
[ 0.226453] pci 0000:00:1c.0: PCI bridge to [bus 02]
[ 0.226464] pci 0000:00:1c.1: PCI bridge to [bus 03]
[ 0.226474] pci 0000:00:1c.3: PCI bridge to [bus 04]
[ 0.226485] pci 0000:00:1c.4: PCI bridge to [bus 05]
[ 0.226490] pci 0000:00:1c.4: bridge window [mem 0xcfc00000-0xcfcfffff]
[ 0.226498] pci 0000:00:1e.0: PCI bridge to [bus 06]
[ 0.226509] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7 window]
[ 0.226511] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff window]
[ 0.226513] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff window]
[ 0.226515] pci_bus 0000:00: resource 7 [mem 0x000c0000-0x000c3fff window]
[ 0.226517] pci_bus 0000:00: resource 8 [mem 0x000c8000-0x000cbfff window]
[ 0.226519] pci_bus 0000:00: resource 9 [mem 0x000cc000-0x000cffff window]
[ 0.226520] pci_bus 0000:00: resource 10 [mem 0x000d0000-0x000d3fff window]
[ 0.226522] pci_bus 0000:00: resource 11 [mem 0x000d4000-0x000d7fff window]
[ 0.226524] pci_bus 0000:00: resource 12 [mem 0x000d8000-0x000dbfff window]
[ 0.226526] pci_bus 0000:00: resource 13 [mem 0x000dc000-0x000dffff window]
[ 0.226528] pci_bus 0000:00: resource 14 [mem 0x000e0000-0x000e3fff window]
[ 0.226529] pci_bus 0000:00: resource 15 [mem 0x000e4000-0x000e7fff window]
[ 0.226531] pci_bus 0000:00: resource 16 [mem 0x000e8000-0x000ebfff window]
[ 0.226533] pci_bus 0000:00: resource 17 [mem 0x000ec000-0x000effff window]
[ 0.226535] pci_bus 0000:00: resource 18 [mem 0x000f0000-0x000fffff window]
[ 0.226537] pci_bus 0000:00: resource 19 [mem 0xc4000000-0xfebfffff window]
[ 0.226538] pci_bus 0000:00: resource 20 [mem 0xfed40000-0xfed44fff window]
[ 0.226541] pci_bus 0000:05: resource 1 [mem 0xcfc00000-0xcfcfffff]
[ 0.226543] pci_bus 0000:06: resource 4 [io 0x0000-0x0cf7 window]
[ 0.226545] pci_bus 0000:06: resource 5 [io 0x0d00-0xffff window]
[ 0.226547] pci_bus 0000:06: resource 6 [mem 0x000a0000-0x000bffff window]
[ 0.226548] pci_bus 0000:06: resource 7 [mem 0x000c0000-0x000c3fff window]
[ 0.226550] pci_bus 0000:06: resource 8 [mem 0x000c8000-0x000cbfff window]
[ 0.226552] pci_bus 0000:06: resource 9 [mem 0x000cc000-0x000cffff window]
[ 0.226554] pci_bus 0000:06: resource 10 [mem 0x000d0000-0x000d3fff window]
[ 0.226556] pci_bus 0000:06: resource 11 [mem 0x000d4000-0x000d7fff window]
[ 0.226557] pci_bus 0000:06: resource 12 [mem 0x000d8000-0x000dbfff window]
[ 0.226559] pci_bus 0000:06: resource 13 [mem 0x000dc000-0x000dffff window]
[ 0.226561] pci_bus 0000:06: resource 14 [mem 0x000e0000-0x000e3fff window]
[ 0.226563] pci_bus 0000:06: resource 15 [mem 0x000e4000-0x000e7fff window]
[ 0.226564] pci_bus 0000:06: resource 16 [mem 0x000e8000-0x000ebfff window]
[ 0.226566] pci_bus 0000:06: resource 17 [mem 0x000ec000-0x000effff window]
[ 0.226568] pci_bus 0000:06: resource 18 [mem 0x000f0000-0x000fffff window]
[ 0.226570] pci_bus 0000:06: resource 19 [mem 0xc4000000-0xfebfffff window]
[ 0.226572] pci_bus 0000:06: resource 20 [mem 0xfed40000-0xfed44fff window]
[ 0.226693] NET: Registered protocol family 2
[ 0.226890] tcp_listen_portaddr_hash hash table entries: 2048 (order: 3, 32768 bytes)
[ 0.226923] TCP established hash table entries: 32768 (order: 6, 262144 bytes)
[ 0.227049] TCP bind hash table entries: 32768 (order: 7, 524288 bytes)
[ 0.227226] TCP: Hash tables configured (established 32768 bind 32768)
[ 0.227280] UDP hash table entries: 2048 (order: 4, 65536 bytes)
[ 0.227318] UDP-Lite hash table entries: 2048 (order: 4, 65536 bytes)
[ 0.227403] NET: Registered protocol family 1
[ 0.227424] pci 0000:00:02.0: Video device with shadowed ROM at [mem 0x000c0000-0x000dffff]
[ 0.228029] PCI: CLS 64 bytes, default 64
[ 0.228087] Unpacking initramfs...
[ 0.404494] Freeing initrd memory: 8940K
[ 0.404510] PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
[ 0.404514] software IO TLB [mem 0xbb70e000-0xbf70e000] (64MB) mapped at [ (ptrval)- (ptrval)]
[ 0.404748] Scanning for low memory corruption every 60 seconds
[ 0.405472] Initialise system trusted keyrings
[ 0.405487] Key type blacklist registered
[ 0.405557] workingset: timestamp_bits=41 max_order=20 bucket_order=0
[ 0.407062] zbud: loaded
[ 0.408677] Key type asymmetric registered
[ 0.408679] Asymmetric key parser 'x509' registered
[ 0.408722] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 247)
[ 0.408763] io scheduler noop registered
[ 0.408764] io scheduler deadline registered
[ 0.408816] io scheduler cfq registered (default)
[ 0.408818] io scheduler mq-deadline registered
[ 0.408819] io scheduler kyber registered
[ 0.408826] io scheduler bfq registered
[ 0.410098] pcieport 0000:00:01.0: Signaling PME with IRQ 24
[ 0.410130] pcieport 0000:00:1c.0: Signaling PME with IRQ 25
[ 0.410157] pcieport 0000:00:1c.1: Signaling PME with IRQ 26
[ 0.410183] pcieport 0000:00:1c.3: Signaling PME with IRQ 27
[ 0.410211] pcieport 0000:00:1c.4: Signaling PME with IRQ 28
[ 0.410299] intel_idle: MWAIT substates: 0x1120
[ 0.410300] intel_idle: v0.4.1 model 0x25
[ 0.410447] intel_idle: lapic_timer_reliable_states 0xffffffff
[ 0.410517] input: Sleep Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/device:1f/PNP0C09:00/PNP0C0E:00/input/input0
[ 0.410542] ACPI: Sleep Button [SLPB]
[ 0.410597] input: Lid Switch as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/device:1f/PNP0C09:00/PNP0C0D:00/input/input1
[ 0.410612] ACPI: Lid Switch [LID]
[ 0.410666] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input2
[ 0.410681] ACPI: Power Button [PWRF]
[ 0.414004] thermal LNXTHERM:00: registered as thermal_zone0
[ 0.414006] ACPI: Thermal Zone [THM0] (40 C)
[ 0.415552] thermal LNXTHERM:01: registered as thermal_zone1
[ 0.415553] ACPI: Thermal Zone [THM1] (27 C)
[ 0.415763] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
[ 0.417193] ledtrig-cpu: registered to indicate activity on CPUs
[ 0.417481] NET: Registered protocol family 10
[ 0.422245] Segment Routing with IPv6
[ 0.422278] NET: Registered protocol family 17
[ 0.422635] RAS: Correctable Errors collector initialized.
[ 0.422692] microcode: sig=0x20652, pf=0x10, revision=0xe
[ 0.422765] microcode: Microcode Update Driver: v2.2.
[ 0.422780] sched_clock: Marking stable (422756641, 0)->(509338958, -86582317)
[ 0.423029] registered taskstats version 1
[ 0.423039] Loading compiled-in X.509 certificates
[ 0.423060] zswap: loaded using pool lzo/zbud
[ 0.426890] Key type big_key registered
[ 0.427207] Magic number: 2:705:743
[ 0.427302] hctosys: unable to open rtc device (rtc0)
[ 0.430065] Freeing unused kernel memory: 1464K
[ 0.430068] Write protecting the kernel read-only data: 16384k
[ 0.430888] Freeing unused kernel memory: 2016K
[ 0.433117] Freeing unused kernel memory: 724K
[ 0.457831] Linux agpgart interface v0.103
[ 1.031419] pci 0000:00:00.0: Intel HD Graphics Chipset
[ 1.031463] pci 0000:00:00.0: detected gtt size: 2097152K total, 262144K mappable
[ 1.032059] pci 0000:00:00.0: detected 32768K stolen memory
[ 1.032134] [drm] Replacing VGA console driver
[ 1.032643] Console: switching to colour dummy device 80x25
[ 1.091808] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
[ 1.091810] [drm] Driver supports precise vblank timestamp query.
[ 1.092171] i915 0000:00:02.0: vgaarb: changed VGA decodes: olddecodes=io+mem,decodes=io+mem:owns=io+mem
[ 1.132856] [drm] RC6 disabled, disabling runtime PM support
[ 1.134679] [drm] Initialized i915 1.6.0 20171222 for 0000:00:02.0 on minor 0
[ 1.134958] ACPI: Video Device [GFX0] (multi-head: yes rom: no post: no)
[ 1.138663] acpi device:03: registered as cooling_device5
[ 1.138765] input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:00/input/input3
[ 1.153033] fbcon: inteldrmfb (fb0) is primary device
[ 1.413422] tsc: Refined TSC clocksource calibration: 2128.000 MHz
[ 1.413432] clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x1eac8316169, max_idle_ns: 440795236083 ns
[ 1.413504] clocksource: Switched to clocksource tsc
[ 1.507811] Console: switching to colour frame buffer device 160x50
[ 1.527265] i915 0000:00:02.0: fb0: inteldrmfb frame buffer device
[ 1.661483] i8042: PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at 0x60,0x64 irq 1,12
[ 1.665184] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 1.665272] serio: i8042 AUX port at 0x60,0x64 irq 12
[ 1.675183] ACPI: bus type USB registered
[ 1.675220] usbcore: registered new interface driver usbfs
[ 1.675236] usbcore: registered new interface driver hub
[ 1.675279] usbcore: registered new device driver usb
[ 1.678287] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 1.678401] SCSI subsystem initialized
[ 1.678650] ehci-pci: EHCI PCI platform driver
[ 1.679006] ehci-pci 0000:00:1a.0: EHCI Host Controller
[ 1.679020] ehci-pci 0000:00:1a.0: new USB bus registered, assigned bus number 1
[ 1.679039] ehci-pci 0000:00:1a.0: debug port 2
[ 1.683237] ehci-pci 0000:00:1a.0: cache line size of 64 is not supported
[ 1.683264] ehci-pci 0000:00:1a.0: irq 21, io mem 0xcfd27000
[ 1.690189] libata version 3.00 loaded.
[ 1.693400] ehci-pci 0000:00:1a.0: USB 2.0 started, EHCI 1.00
[ 1.693485] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
[ 1.693487] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.693489] usb usb1: Product: EHCI Host Controller
[ 1.693490] usb usb1: Manufacturer: Linux 4.16.6-1-ARCH ehci_hcd
[ 1.693492] usb usb1: SerialNumber: 0000:00:1a.0
[ 1.693717] hub 1-0:1.0: USB hub found
[ 1.693732] hub 1-0:1.0: 2 ports detected
[ 1.694206] ehci-pci 0000:00:1d.0: EHCI Host Controller
[ 1.694216] ehci-pci 0000:00:1d.0: new USB bus registered, assigned bus number 2
[ 1.694232] ehci-pci 0000:00:1d.0: debug port 2
[ 1.698145] ehci-pci 0000:00:1d.0: cache line size of 64 is not supported
[ 1.698183] ehci-pci 0000:00:1d.0: irq 19, io mem 0xcfd28000
[ 1.702318] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input4
[ 1.710100] ehci-pci 0000:00:1d.0: USB 2.0 started, EHCI 1.00
[ 1.710180] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002
[ 1.710183] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.710184] usb usb2: Product: EHCI Host Controller
[ 1.710186] usb usb2: Manufacturer: Linux 4.16.6-1-ARCH ehci_hcd
[ 1.710187] usb usb2: SerialNumber: 0000:00:1d.0
[ 1.710627] hub 2-0:1.0: USB hub found
[ 1.710640] hub 2-0:1.0: 2 ports detected
[ 1.710815] ahci 0000:00:1f.2: version 3.0
[ 1.711135] ahci 0000:00:1f.2: SSS flag set, parallel bus scan disabled
[ 1.711168] ahci 0000:00:1f.2: AHCI 0001.0300 32 slots 6 ports 3 Gbps 0x3 impl SATA mode
[ 1.711172] ahci 0000:00:1f.2: flags: 64bit ncq sntf ilck stag pm led clo pio slum part apst
[ 1.712244] scsi host0: ahci
[ 1.712451] scsi host1: ahci
[ 1.716133] scsi host2: ahci
[ 1.716312] scsi host3: ahci
[ 1.716450] scsi host4: ahci
[ 1.716577] scsi host5: ahci
[ 1.716633] ata1: SATA max UDMA/133 abar m2048@0xcfd26000 port 0xcfd26100 irq 30
[ 1.716635] ata2: SATA max UDMA/133 abar m2048@0xcfd26000 port 0xcfd26180 irq 30
[ 1.716636] ata3: DUMMY
[ 1.716637] ata4: DUMMY
[ 1.716638] ata5: DUMMY
[ 1.716639] ata6: DUMMY
[ 2.023420] usb 1-1: new high-speed USB device number 2 using ehci-pci
[ 2.031102] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[ 2.031667] ata1.00: ATA-9: M4-CT128M4SSD2, 0309, max UDMA/100
[ 2.031671] ata1.00: 250069680 sectors, multi 16: LBA48 NCQ (depth 31/32), AA
[ 2.032214] ata1.00: configured for UDMA/100
[ 2.032421] scsi 0:0:0:0: Direct-Access ATA M4-CT128M4SSD2 0309 PQ: 0 ANSI: 5
[ 2.040140] usb 2-1: new high-speed USB device number 2 using ehci-pci
[ 2.170846] usb 1-1: New USB device found, idVendor=8087, idProduct=0020
[ 2.170849] usb 1-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[ 2.171286] hub 1-1:1.0: USB hub found
[ 2.171490] hub 1-1:1.0: 6 ports detected
[ 2.187174] usb 2-1: New USB device found, idVendor=8087, idProduct=0020
[ 2.187180] usb 2-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[ 2.187813] hub 2-1:1.0: USB hub found
[ 2.187977] hub 2-1:1.0: 8 ports detected
[ 2.347788] ata2: SATA link down (SStatus 0 SControl 300)
[ 2.355932] sd 0:0:0:0: [sda] 250069680 512-byte logical blocks: (128 GB/119 GiB)
[ 2.355954] sd 0:0:0:0: [sda] Write Protect is off
[ 2.355957] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 2.355981] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 2.356608] sda: sda1 sda2
[ 2.356951] sd 0:0:0:0: [sda] Attached SCSI disk
[ 2.449642] random: fast init done
[ 2.450053] usb 1-1.6: new high-speed USB device number 3 using ehci-pci
[ 2.454339] EXT4-fs (sda1): mounted filesystem with ordered data mode. Opts: (null)
[ 2.552623] usb 1-1.6: New USB device found, idVendor=17ef, idProduct=4816
[ 2.552631] usb 1-1.6: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[ 2.552636] usb 1-1.6: Product: Integrated Camera
[ 2.552642] usb 1-1.6: Manufacturer: Chicony Electronics Co., Ltd.
[ 2.606735] systemd[1]: systemd 238 running in system mode. (+PAM -AUDIT -SELINUX -IMA -APPARMOR +SMACK -SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ +LZ4 +SECCOMP +BLKID +ELFUTILS +KMOD -IDN2 +IDN +PCRE2 default-hierarchy=hybrid)
[ 2.623581] systemd[1]: Detected architecture x86-64.
[ 2.627396] systemd[1]: Set hostname to <explorer>.
[ 2.767435] random: systemd: uninitialized urandom read (16 bytes read)
[ 2.767541] systemd[1]: Listening on LVM2 poll daemon socket.
[ 2.767820] random: systemd: uninitialized urandom read (16 bytes read)
[ 2.767888] systemd[1]: Listening on Device-mapper event daemon FIFOs.
[ 2.768066] random: systemd: uninitialized urandom read (16 bytes read)
[ 2.768138] systemd[1]: Listening on LVM2 metadata daemon socket.
[ 2.773433] random: systemd: uninitialized urandom read (16 bytes read)
[ 2.775669] systemd[1]: Listening on Process Core Dump Socket.
[ 2.775873] random: systemd: uninitialized urandom read (16 bytes read)
[ 2.775953] systemd[1]: Listening on udev Control Socket.
[ 2.776135] random: systemd: uninitialized urandom read (16 bytes read)
[ 2.776249] systemd[1]: Listening on Journal Socket.
[ 2.776482] random: systemd: uninitialized urandom read (16 bytes read)
[ 2.778540] systemd[1]: Mounting POSIX Message Queue File System...
[ 2.779690] random: systemd: uninitialized urandom read (16 bytes read)
[ 2.781170] random: systemd: uninitialized urandom read (16 bytes read)
[ 2.782778] random: systemd: uninitialized urandom read (16 bytes read)
[ 2.804183] EXT4-fs (sda1): re-mounted. Opts: data=ordered
[ 2.925055] systemd-journald[253]: Received request to flush runtime journal from PID 1
[ 3.004036] rtc_cmos 00:03: RTC can wake from S4
[ 3.004368] rtc_cmos 00:03: rtc core: registered rtc_cmos as rtc0
[ 3.004407] rtc_cmos 00:03: alarms up to one month, y3k, 242 bytes nvram, hpet irqs
[ 3.008593] ACPI: AC Adapter [AC] (on-line)
[ 3.029836] ACPI: Battery Slot [BAT0] (battery present)
[ 3.030062] ACPI: Battery Slot [BAT1] (battery absent)
[ 3.047569] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[ 3.064930] pps_core: LinuxPPS API ver. 1 registered
[ 3.064931] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it>
[ 3.068308] PTP clock support registered
[ 3.072156] intel ips 0000:00:1f.6: CPU TDP doesn't match expected value (found 25, expected 29)
[ 3.073019] intel ips 0000:00:1f.6: IPS driver initialized, MCP temp limit 90
[ 3.073319] i801_smbus 0000:00:1f.3: SMBus using PCI interrupt
[ 3.078108] ACPI Warning: SystemIO range 0x0000000000000528-0x000000000000052F conflicts with OpRegion 0x0000000000000500-0x000000000000057F (\PMIO) (20180105/utaddress-247)
[ 3.078119] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[ 3.078123] ACPI Warning: SystemIO range 0x00000000000004C0-0x00000000000004CF conflicts with OpRegion 0x0000000000000480-0x00000000000004EB (\GPIO) (20180105/utaddress-247)
[ 3.078130] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[ 3.078131] ACPI Warning: SystemIO range 0x00000000000004B0-0x00000000000004BF conflicts with OpRegion 0x0000000000000480-0x00000000000004EB (\GPIO) (20180105/utaddress-247)
[ 3.078137] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[ 3.078138] ACPI Warning: SystemIO range 0x0000000000000480-0x00000000000004AF conflicts with OpRegion 0x0000000000000480-0x00000000000004EB (\GPIO) (20180105/utaddress-247)
[ 3.078143] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[ 3.078144] lpc_ich: Resource conflict(s) found affecting gpio_ich
[ 3.080816] Non-volatile memory driver v1.3
[ 3.128067] e1000e: Intel(R) PRO/1000 Network Driver - 3.2.6-k
[ 3.128070] e1000e: Copyright(c) 1999 - 2015 Intel Corporation.
[ 3.128198] e1000e 0000:00:19.0: Interrupt Throttling Rate (ints/sec) set to dynamic conservative mode
[ 3.134828] input: PC Speaker as /devices/platform/pcspkr/input/input6
[ 3.135902] thinkpad_acpi: ThinkPad ACPI Extras v0.25
[ 3.135904] thinkpad_acpi: http://ibm-acpi.sf.net/
[ 3.135905] thinkpad_acpi: ThinkPad BIOS CBET4000 4.7-994-ga940e384b6, EC 6QHT34WW-3.18
[ 3.135907] thinkpad_acpi: Lenovo ThinkPad X201, model 3626BJ3
[ 3.154673] thinkpad_acpi: radio switch found; radios are enabled
[ 3.154834] thinkpad_acpi: Tablet mode switch found (type: MHKG), currently in laptop mode
[ 3.154865] thinkpad_acpi: This ThinkPad has standard ACPI backlight brightness control, supported by the ACPI video driver
[ 3.154866] thinkpad_acpi: Disabling thinkpad-acpi brightness events by default...
[ 3.173127] thinkpad_acpi: Standard ACPI backlight interface available, not loading native one
[ 3.173278] thinkpad_acpi: Console audio control enabled, mode: monitor (read only)
[ 3.186218] input: ThinkPad Extra Buttons as /devices/platform/thinkpad_acpi/input/input7
[ 3.198279] media: Linux media interface: v0.10
[ 3.236181] cfg80211: Loading compiled-in X.509 certificates for regulatory database
[ 3.243289] device-mapper: uevent: version 1.0.3
[ 3.244312] device-mapper: ioctl: 4.37.0-ioctl (2017-09-20) initialised: dm-devel@redhat.com
[ 3.252895] cfg80211: Loaded X.509 cert 'sforshee: 00b28ddf47aef9cea7'
[ 3.253334] platform regulatory.0: Direct firmware load for regulatory.db failed with error -2
[ 3.253358] cfg80211: failed to load regulatory.db
[ 3.344609] iTCO_vendor_support: vendor-support=0
[ 3.348357] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.11
[ 3.348449] iTCO_wdt: Found a QM57 TCO device (Version=2, TCOBASE=0x0560)
[ 3.348718] iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0)
[ 3.351609] Linux video capture interface: v2.00
[ 3.377381] e1000e 0000:00:19.0 eth0: (PCI Express:2.5GT/s:Width x1) f0:de:f1:00:03:0e
[ 3.377682] e1000e 0000:00:19.0 eth0: Intel(R) PRO/1000 Network Connection
[ 3.377742] e1000e 0000:00:19.0 eth0: MAC: 9, PHY: 10, PBA No: A002FF-0FF
[ 3.378582] snd_hda_intel 0000:00:1b.0: bound 0000:00:02.0 (ops i915_audio_component_bind_ops [i915])
[ 3.393168] kvm: VM_EXIT_LOAD_IA32_PERF_GLOBAL_CTRL does not work properly. Using workaround
[ 3.398963] e1000e 0000:00:19.0 enp0s25: renamed from eth0
[ 3.418344] snd_hda_codec_conexant hdaudioC0D0: CX20585: BIOS auto-probing.
[ 3.418826] snd_hda_codec_conexant hdaudioC0D0: autoconfig for CX20585: line_outs=1 (0x1f/0x0/0x0/0x0/0x0) type:speaker
[ 3.418829] snd_hda_codec_conexant hdaudioC0D0: speaker_outs=0 (0x0/0x0/0x0/0x0/0x0)
[ 3.418833] snd_hda_codec_conexant hdaudioC0D0: hp_outs=2 (0x1c/0x19/0x0/0x0/0x0)
[ 3.418835] snd_hda_codec_conexant hdaudioC0D0: mono: mono_out=0x0
[ 3.418837] snd_hda_codec_conexant hdaudioC0D0: inputs:
[ 3.418841] snd_hda_codec_conexant hdaudioC0D0: Internal Mic=0x23
[ 3.418843] snd_hda_codec_conexant hdaudioC0D0: Mic=0x1b
[ 3.418846] snd_hda_codec_conexant hdaudioC0D0: Dock Mic=0x1a
[ 3.420210] snd_hda_codec_conexant hdaudioC0D0: Enable sync_write for stable communication
[ 3.423749] uvcvideo: Found UVC 1.00 device Integrated Camera (17ef:4816)
[ 3.425253] uvcvideo 1-1.6:1.0: Entity type for entity Extension 3 was not initialized!
[ 3.425459] uvcvideo 1-1.6:1.0: Entity type for entity Processing 2 was not initialized!
[ 3.425462] uvcvideo 1-1.6:1.0: Entity type for entity Camera 1 was not initialized!
[ 3.425837] input: Integrated Camera: Integrated C as /devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.6/1-1.6:1.0/input/input14
[ 3.426511] usbcore: registered new interface driver uvcvideo
[ 3.426513] USB Video Class driver (1.1.1)
[ 3.439802] input: HDA Digital PCBeep as /devices/pci0000:00/0000:00:1b.0/sound/card0/input9
[ 3.440228] input: HDA Intel MID Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input10
[ 3.440322] input: HDA Intel MID Dock Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input11
[ 3.440414] input: HDA Intel MID Dock Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card0/input12
[ 3.440511] input: HDA Intel MID Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card0/input13
[ 3.440605] input: HDA Intel MID HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:1b.0/sound/card0/input15
[ 3.967168] ath: EEPROM regdomain: 0x0
[ 3.967170] ath: EEPROM indicates default country code should be used
[ 3.967171] ath: doing EEPROM country->regdmn map search
[ 3.967172] ath: country maps to regdmn code: 0x3a
[ 3.967173] ath: Country alpha2 being used: US
[ 3.967174] ath: Regpair used: 0x3a
[ 3.979055] ieee80211 phy0: Selected rate control algorithm 'minstrel_ht'
[ 3.979888] ieee80211 phy0: Atheros AR9280 Rev:2 mem=0xffffa25040c40000, irq=16
[ 3.984379] ath9k 0000:05:00.0 wlp5s0: renamed from wlan0
[ 4.021335] psmouse serio1: trackpoint: IBM TrackPoint firmware: 0x0e, buttons: 3/3
[ 4.040128] input: TPPS/2 IBM TrackPoint as /devices/platform/i8042/serio1/input/input8
[ 4.049169] mousedev: PS/2 mouse device common for all mice
[ 4.527265] Adding 4447572k swap on /dev/mapper/swap. Priority:-2 extents:1 across:4447572k SSFS
[ 5.488737] IPv6: ADDRCONF(NETDEV_UP): enp0s25: link is not ready
[ 5.693779] IPv6: ADDRCONF(NETDEV_UP): enp0s25: link is not ready
[ 5.702808] IPv6: ADDRCONF(NETDEV_UP): wlp5s0: link is not ready
[ 5.717995] IPv6: ADDRCONF(NETDEV_UP): wlp5s0: link is not ready
[ 5.740962] IPv6: ADDRCONF(NETDEV_UP): wlp5s0: link is not ready
[ 5.886083] IPv6: ADDRCONF(NETDEV_UP): wlp5s0: link is not ready
[ 6.404488] fuse init (API version 7.26)
[ 6.950048] random: crng init done
[ 9.646769] Key type trusted registered
[ 9.650389] Key type encrypted registered
[ 9.746705] IPv6: ADDRCONF(NETDEV_UP): wlp5s0: link is not ready