blob: 3d7f55142d1f80efddd61e0d92ab8176ce02e9bb [file] [log] [blame]
[ 0.000000] random: get_random_bytes called from start_kernel+0x3d/0x456 with crng_init=0
[ 0.000000] Linux version 4.13.0-1-amd64 (debian-kernel@lists.debian.org) (gcc version 6.4.0 20171010 (Debian 6.4.0-8)) #1 SMP Debian 4.13.4-2 (2017-10-15)
[ 0.000000] Command line: BOOT_IMAGE=/vmlinuz-4.13.0-1-amd64 root=UUID=f545d1ea-3103-4100-8a85-54db5c9634ad ro quiet iomem=relaxed
[ 0.000000] x86/fpu: Supporting XSAVE feature 0x001: 'x87 floating point registers'
[ 0.000000] x86/fpu: Supporting XSAVE feature 0x002: 'SSE registers'
[ 0.000000] x86/fpu: Supporting XSAVE feature 0x004: 'AVX registers'
[ 0.000000] x86/fpu: xstate_offset[2]: 576, xstate_sizes[2]: 256
[ 0.000000] x86/fpu: Enabled xstate features 0x7, context size is 832 bytes, using 'standard' format.
[ 0.000000] e820: BIOS-provided physical RAM map:
[ 0.000000] BIOS-e820: [mem 0x0000000000000000-0x0000000000000fff] type 16
[ 0.000000] BIOS-e820: [mem 0x0000000000001000-0x000000000009ffff] usable
[ 0.000000] BIOS-e820: [mem 0x00000000000a0000-0x00000000000fffff] reserved
[ 0.000000] BIOS-e820: [mem 0x0000000000100000-0x000000007fef9fff] usable
[ 0.000000] BIOS-e820: [mem 0x000000007fefa000-0x000000007fffffff] type 16
[ 0.000000] BIOS-e820: [mem 0x0000000080000000-0x000000008e9fffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000f8000000-0x00000000fbffffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fed40000-0x00000000fed44fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fed90000-0x00000000fed91fff] reserved
[ 0.000000] BIOS-e820: [mem 0x0000000100000000-0x000000046f5fffff] usable
[ 0.000000] NX (Execute Disable) protection: active
[ 0.000000] random: fast init done
[ 0.000000] SMBIOS 2.7 present.
[ 0.000000] DMI: LENOVO 23539LU/23539LU, BIOS CBET4000 4.6-1897-gaa8e5d36b1 10/23/2017
[ 0.000000] tsc: Fast TSC calibration using PIT
[ 0.000000] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
[ 0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable
[ 0.000000] e820: last_pfn = 0x46f600 max_arch_pfn = 0x400000000
[ 0.000000] MTRR default type: write-back
[ 0.000000] MTRR fixed ranges enabled:
[ 0.000000] 00000-9FFFF write-back
[ 0.000000] A0000-BFFFF uncachable
[ 0.000000] C0000-FFFFF write-back
[ 0.000000] MTRR variable ranges enabled:
[ 0.000000] 0 base 080000000 mask FC0000000 uncachable
[ 0.000000] 1 base 0C0000000 mask FE0000000 uncachable
[ 0.000000] 2 base 0E0000000 mask FF0000000 write-combining
[ 0.000000] 3 base 0F0000000 mask FF0000000 uncachable
[ 0.000000] 4 disabled
[ 0.000000] 5 disabled
[ 0.000000] 6 disabled
[ 0.000000] 7 disabled
[ 0.000000] 8 disabled
[ 0.000000] 9 disabled
[ 0.000000] x86/PAT: Configuration [0-7]: WB WC UC- UC WB WC UC- WT
[ 0.000000] e820: last_pfn = 0x7fefa max_arch_pfn = 0x400000000
[ 0.000000] Base memory trampoline at [ffff9f4300099000] 99000 size 24576
[ 0.000000] BRK [0x2efd57000, 0x2efd57fff] PGTABLE
[ 0.000000] BRK [0x2efd58000, 0x2efd58fff] PGTABLE
[ 0.000000] BRK [0x2efd59000, 0x2efd59fff] PGTABLE
[ 0.000000] BRK [0x2efd5a000, 0x2efd5afff] PGTABLE
[ 0.000000] BRK [0x2efd5b000, 0x2efd5bfff] PGTABLE
[ 0.000000] BRK [0x2efd5c000, 0x2efd5cfff] PGTABLE
[ 0.000000] BRK [0x2efd5d000, 0x2efd5dfff] PGTABLE
[ 0.000000] RAMDISK: [mem 0x356bb000-0x36b54fff]
[ 0.000000] ACPI: Early table checksum verification disabled
[ 0.000000] ACPI: RSDP 0x00000000000F0000 000024 (v02 CORE )
[ 0.000000] ACPI: XSDT 0x000000007FF0C0E0 00005C (v01 CORE COREBOOT 00000000 CORE 00000000)
[ 0.000000] ACPI: FACP 0x000000007FF0F7E0 0000F4 (v04 CORE COREBOOT 00000000 CORE 00000000)
[ 0.000000] ACPI: DSDT 0x000000007FF0C280 00355B (v02 COREv4 COREBOOT 20110725 INTL 20161222)
[ 0.000000] ACPI: FACS 0x000000007FF0C240 000040
[ 0.000000] ACPI: FACS 0x000000007FF0C240 000040
[ 0.000000] ACPI: SSDT 0x000000007FF0F8E0 0018AD (v02 CORE COREBOOT 0000002A CORE 0000002A)
[ 0.000000] ACPI: MCFG 0x000000007FF11190 00003C (v01 CORE COREBOOT 00000000 CORE 00000000)
[ 0.000000] ACPI: TCPA 0x000000007FF111D0 000032 (v02 CORE COREBOOT 00000000 CORE 00000000)
[ 0.000000] ACPI: APIC 0x000000007FF11210 00006C (v01 CORE COREBOOT 00000000 CORE 00000000)
[ 0.000000] ACPI: DMAR 0x000000007FF11280 0000A8 (v01 CORE COREBOOT 00000000 CORE 00000000)
[ 0.000000] ACPI: HPET 0x000000007FF13330 000038 (v01 CORE COREBOOT 00000000 CORE 00000000)
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] No NUMA configuration found
[ 0.000000] Faking a node at [mem 0x0000000000000000-0x000000046f5fffff]
[ 0.000000] NODE_DATA(0) allocated [mem 0x46f5ee000-0x46f5f2fff]
[ 0.000000] Zone ranges:
[ 0.000000] DMA [mem 0x0000000000001000-0x0000000000ffffff]
[ 0.000000] DMA32 [mem 0x0000000001000000-0x00000000ffffffff]
[ 0.000000] Normal [mem 0x0000000100000000-0x000000046f5fffff]
[ 0.000000] Device empty
[ 0.000000] Movable zone start for each node
[ 0.000000] Early memory node ranges
[ 0.000000] node 0: [mem 0x0000000000001000-0x000000000009ffff]
[ 0.000000] node 0: [mem 0x0000000000100000-0x000000007fef9fff]
[ 0.000000] node 0: [mem 0x0000000100000000-0x000000046f5fffff]
[ 0.000000] Initmem setup node 0 [mem 0x0000000000001000-0x000000046f5fffff]
[ 0.000000] On node 0 totalpages: 4125849
[ 0.000000] DMA zone: 64 pages used for memmap
[ 0.000000] DMA zone: 22 pages reserved
[ 0.000000] DMA zone: 3999 pages, LIFO batch:0
[ 0.000000] DMA32 zone: 8124 pages used for memmap
[ 0.000000] DMA32 zone: 519930 pages, LIFO batch:31
[ 0.000000] Normal zone: 56280 pages used for memmap
[ 0.000000] Normal zone: 3601920 pages, LIFO batch:31
[ 0.000000] Reserving Intel graphics memory at 0x0000000080a00000-0x000000008e9fffff
[ 0.000000] ACPI: PM-Timer IO Port: 0x508
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-23
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[ 0.000000] ACPI: IRQ0 used by override.
[ 0.000000] ACPI: IRQ9 used by override.
[ 0.000000] Using ACPI (MADT) for SMP configuration information
[ 0.000000] ACPI: HPET id: 0x8086a701 base: 0xfed00000
[ 0.000000] smpboot: Allowing 4 CPUs, 0 hotplug CPUs
[ 0.000000] PM: Registered nosave memory: [mem 0x00000000-0x00000fff]
[ 0.000000] PM: Registered nosave memory: [mem 0x000a0000-0x000fffff]
[ 0.000000] PM: Registered nosave memory: [mem 0x7fefa000-0x7fffffff]
[ 0.000000] PM: Registered nosave memory: [mem 0x80000000-0x8e9fffff]
[ 0.000000] PM: Registered nosave memory: [mem 0x8ea00000-0xf7ffffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xf8000000-0xfbffffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfc000000-0xfed3ffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfed40000-0xfed44fff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfed45000-0xfed8ffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfed90000-0xfed91fff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfed92000-0xffffffff]
[ 0.000000] e820: [mem 0x8ea00000-0xf7ffffff] available for PCI devices
[ 0.000000] Booting paravirtualized kernel on bare hardware
[ 0.000000] clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645519600211568 ns
[ 0.000000] setup_percpu: NR_CPUS:512 nr_cpumask_bits:512 nr_cpu_ids:4 nr_node_ids:1
[ 0.000000] percpu: Embedded 38 pages/cpu @ffff9f476f200000 s115224 r8192 d32232 u524288
[ 0.000000] pcpu-alloc: s115224 r8192 d32232 u524288 alloc=1*2097152
[ 0.000000] pcpu-alloc: [0] 0 1 2 3
[ 0.000000] Built 1 zonelists in Node order, mobility grouping on. Total pages: 4061359
[ 0.000000] Policy zone: Normal
[ 0.000000] Kernel command line: BOOT_IMAGE=/vmlinuz-4.13.0-1-amd64 root=UUID=f545d1ea-3103-4100-8a85-54db5c9634ad ro quiet iomem=relaxed
[ 0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes)
[ 0.000000] Calgary: detecting Calgary via BIOS EBDA area
[ 0.000000] Calgary: Unable to locate Rio Grande table in EBDA - bailing!
[ 0.000000] Memory: 16141716K/16503396K available (6587K kernel code, 1153K rwdata, 2964K rodata, 1472K init, 696K bss, 361680K reserved, 0K cma-reserved)
[ 0.000000] ftrace: allocating 28602 entries in 112 pages
[ 0.000000] Hierarchical RCU implementation.
[ 0.000000] RCU restricting CPUs from NR_CPUS=512 to nr_cpu_ids=4.
[ 0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=4
[ 0.000000] NR_IRQS: 33024, nr_irqs: 456, preallocated irqs: 16
[ 0.000000] Console: colour dummy device 80x25
[ 0.000000] console [tty0] enabled
[ 0.000000] clocksource: hpet: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 133484882848 ns
[ 0.000000] hpet clockevent registered
[ 0.000000] tsc: Fast TSC calibration using PIT
[ 0.004000] tsc: Detected 2594.005 MHz processor
[ 0.004000] Calibrating delay loop (skipped), value calculated using timer frequency.. 5188.01 BogoMIPS (lpj=10376020)
[ 0.004000] pid_max: default: 32768 minimum: 301
[ 0.004000] ACPI: Core revision 20170531
[ 0.009226] ACPI: 2 ACPI AML tables successfully acquired and loaded
[ 0.009265] Security Framework initialized
[ 0.009266] Yama: disabled by default; enable with sysctl kernel.yama.*
[ 0.009271] AppArmor: AppArmor disabled by boot time parameter
[ 0.011819] Dentry cache hash table entries: 2097152 (order: 12, 16777216 bytes)
[ 0.013130] Inode-cache hash table entries: 1048576 (order: 11, 8388608 bytes)
[ 0.013185] Mount-cache hash table entries: 32768 (order: 6, 262144 bytes)
[ 0.013227] Mountpoint-cache hash table entries: 32768 (order: 6, 262144 bytes)
[ 0.013405] CPU: Physical Processor ID: 0
[ 0.013406] CPU: Processor Core ID: 0
[ 0.013412] mce: CPU supports 7 MCE banks
[ 0.013420] CPU0: Thermal monitoring enabled (TM1)
[ 0.013429] process: using mwait in idle threads
[ 0.013431] Last level iTLB entries: 4KB 512, 2MB 8, 4MB 8
[ 0.013432] Last level dTLB entries: 4KB 512, 2MB 32, 4MB 32, 1GB 0
[ 0.013526] Freeing SMP alternatives memory: 28K
[ 0.014725] smpboot: Max logical packages: 2
[ 0.014729] DMAR: Host address width 36
[ 0.014730] DMAR: DRHD base: 0x000000fed90000 flags: 0x0
[ 0.014738] DMAR: dmar0: reg_base_addr fed90000 ver 1:0 cap c0000020e60262 ecap f0101a
[ 0.014738] DMAR: DRHD base: 0x000000fed91000 flags: 0x1
[ 0.014741] DMAR: dmar1: reg_base_addr fed91000 ver 1:0 cap c9008020660262 ecap f0105a
[ 0.014743] DMAR-IR: IOAPIC id 2 under DRHD base 0xfed91000 IOMMU 1
[ 0.014744] DMAR-IR: HPET id 0 under DRHD base 0xfed91000
[ 0.014745] DMAR-IR: Queued invalidation will be enabled to support x2apic and Intr-remapping.
[ 0.015026] DMAR-IR: Enabled IRQ remapping in x2apic mode
[ 0.015027] x2apic enabled
[ 0.015032] Switched APIC routing to cluster x2apic.
[ 0.015485] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[ 0.055182] TSC deadline timer enabled
[ 0.055186] smpboot: CPU0: Intel(R) Core(TM) i5-3320M CPU @ 2.60GHz (family: 0x6, model: 0x3a, stepping: 0x9)
[ 0.055263] Performance Events: PEBS fmt1+, IvyBridge events, 16-deep LBR, full-width counters, Intel PMU driver.
[ 0.055283] ... version: 3
[ 0.055283] ... bit width: 48
[ 0.055284] ... generic registers: 4
[ 0.055284] ... value mask: 0000ffffffffffff
[ 0.055285] ... max period: 00007fffffffffff
[ 0.055285] ... fixed-purpose events: 3
[ 0.055285] ... event mask: 000000070000000f
[ 0.055318] Hierarchical SRCU implementation.
[ 0.055744] NMI watchdog: enabled on all CPUs, permanently consumes one hw-PMU counter.
[ 0.055759] smp: Bringing up secondary CPUs ...
[ 0.055841] x86: Booting SMP configuration:
[ 0.055842] .... node #0, CPUs: #1 #2 #3
[ 0.294021] smp: Brought up 1 node, 4 CPUs
[ 0.294021] smpboot: Total of 4 processors activated (20756.07 BogoMIPS)
[ 0.296393] devtmpfs: initialized
[ 0.296393] x86/mm: Memory block size: 128MB
[ 0.297236] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns
[ 0.297236] futex hash table entries: 1024 (order: 4, 65536 bytes)
[ 0.297236] pinctrl core: initialized pinctrl subsystem
[ 0.297236] NET: Registered protocol family 16
[ 0.297236] cpuidle: using governor ladder
[ 0.297236] cpuidle: using governor menu
[ 0.297236] PCCT header not found.
[ 0.297236] ACPI: bus type PCI registered
[ 0.297236] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
[ 0.297236] PCI: MMCONFIG for domain 0000 [bus 00-3f] at [mem 0xf8000000-0xfbffffff] (base 0xf8000000)
[ 0.297236] PCI: MMCONFIG at [mem 0xf8000000-0xfbffffff] reserved in E820
[ 0.297236] PCI: Using configuration type 1 for base access
[ 0.297236] core: PMU erratum BJ122, BV98, HSD29 worked around, HT is on
[ 0.297236] HugeTLB registered 2.00 MiB page size, pre-allocated 0 pages
[ 0.297236] ACPI: Added _OSI(Module Device)
[ 0.297236] ACPI: Added _OSI(Processor Device)
[ 0.297236] ACPI: Added _OSI(3.0 _SCP Extensions)
[ 0.297236] ACPI: Added _OSI(Processor Aggregator Device)
[ 0.297236] ACPI: Executed 1 blocks of module-level executable AML code
[ 0.301379] ACPI: EC: EC started
[ 0.301379] ACPI: EC: interrupt blocked
[ 0.301422] ACPI: \_SB_.PCI0.LPCB.EC__: Used as first EC
[ 0.301423] ACPI: \_SB_.PCI0.LPCB.EC__: GPE=0x11, EC_CMD/EC_SC=0x66, EC_DATA=0x62
[ 0.301424] ACPI: \_SB_.PCI0.LPCB.EC__: Used as boot DSDT EC to handle transactions
[ 0.301425] ACPI: Interpreter enabled
[ 0.301441] ACPI: (supports S0 S3 S4 S5)
[ 0.301442] ACPI: Using IOAPIC for interrupt routing
[ 0.301459] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
[ 0.305535] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
[ 0.305538] acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI]
[ 0.305583] acpi PNP0A08:00: _OSC: OS now controls [PCIeHotplug PME AER PCIeCapability]
[ 0.305592] acpi PNP0A08:00: [Firmware Info]: MMCONFIG for domain 0000 [bus 00-3f] only partially covers this bridge
[ 0.305769] PCI host bridge to bus 0000:00
[ 0.305771] pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7 window]
[ 0.305773] pci_bus 0000:00: root bus resource [io 0x0d00-0xffff window]
[ 0.305774] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff window]
[ 0.305775] pci_bus 0000:00: root bus resource [mem 0x000c0000-0x000c3fff window]
[ 0.305776] pci_bus 0000:00: root bus resource [mem 0x000c4000-0x000c7fff window]
[ 0.305777] pci_bus 0000:00: root bus resource [mem 0x000c8000-0x000cbfff window]
[ 0.305778] pci_bus 0000:00: root bus resource [mem 0x000cc000-0x000cffff window]
[ 0.305779] pci_bus 0000:00: root bus resource [mem 0x000d0000-0x000d3fff window]
[ 0.305780] pci_bus 0000:00: root bus resource [mem 0x000d4000-0x000d7fff window]
[ 0.305781] pci_bus 0000:00: root bus resource [mem 0x000d8000-0x000dbfff window]
[ 0.305782] pci_bus 0000:00: root bus resource [mem 0x000dc000-0x000dffff window]
[ 0.305783] pci_bus 0000:00: root bus resource [mem 0x000e0000-0x000e3fff window]
[ 0.305784] pci_bus 0000:00: root bus resource [mem 0x000e4000-0x000e7fff window]
[ 0.305785] pci_bus 0000:00: root bus resource [mem 0x000e8000-0x000ebfff window]
[ 0.305786] pci_bus 0000:00: root bus resource [mem 0x000ec000-0x000effff window]
[ 0.305787] pci_bus 0000:00: root bus resource [mem 0x000f0000-0x000fffff window]
[ 0.305789] pci_bus 0000:00: root bus resource [mem 0x8ea00001-0xf7ffffff window]
[ 0.305790] pci_bus 0000:00: root bus resource [mem 0xfed40000-0xfed44fff window]
[ 0.305791] pci_bus 0000:00: root bus resource [bus 00-ff]
[ 0.305798] pci 0000:00:00.0: [8086:0154] type 00 class 0x060000
[ 0.305877] pci 0000:00:01.0: [8086:0151] type 01 class 0x060400
[ 0.305904] pci 0000:00:01.0: PME# supported from D0 D3hot D3cold
[ 0.305961] pci 0000:00:02.0: [8086:0166] type 00 class 0x030000
[ 0.305972] pci 0000:00:02.0: reg 0x10: [mem 0xf1400000-0xf17fffff 64bit]
[ 0.305977] pci 0000:00:02.0: reg 0x18: [mem 0xe0000000-0xefffffff 64bit pref]
[ 0.305981] pci 0000:00:02.0: reg 0x20: [io 0x3000-0x303f]
[ 0.306047] pci 0000:00:04.0: [8086:0153] type 00 class 0x118000
[ 0.306056] pci 0000:00:04.0: reg 0x10: [mem 0xf1930000-0xf1937fff 64bit]
[ 0.306139] pci 0000:00:14.0: [8086:1e31] type 00 class 0x0c0330
[ 0.306163] pci 0000:00:14.0: reg 0x10: [mem 0xf1920000-0xf192ffff 64bit]
[ 0.306229] pci 0000:00:14.0: PME# supported from D3hot D3cold
[ 0.306292] pci 0000:00:19.0: [8086:1502] type 00 class 0x020000
[ 0.306310] pci 0000:00:19.0: reg 0x10: [mem 0xf1900000-0xf191ffff]
[ 0.306318] pci 0000:00:19.0: reg 0x14: [mem 0xf193c000-0xf193cfff]
[ 0.306326] pci 0000:00:19.0: reg 0x18: [io 0x3040-0x305f]
[ 0.306384] pci 0000:00:19.0: PME# supported from D0 D3hot D3cold
[ 0.306441] pci 0000:00:1a.0: [8086:1e2d] type 00 class 0x0c0320
[ 0.306463] pci 0000:00:1a.0: reg 0x10: [mem 0xf193e000-0xf193e3ff]
[ 0.306543] pci 0000:00:1a.0: PME# supported from D0 D3hot D3cold
[ 0.306604] pci 0000:00:1b.0: [8086:1e20] type 00 class 0x040300
[ 0.306626] pci 0000:00:1b.0: reg 0x10: [mem 0xf1938000-0xf193bfff 64bit]
[ 0.306696] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
[ 0.306767] pci 0000:00:1c.0: [8086:1e12] type 01 class 0x060400
[ 0.306903] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
[ 0.306984] pci 0000:00:1c.1: [8086:1e14] type 01 class 0x060400
[ 0.307122] pci 0000:00:1c.1: PME# supported from D0 D3hot D3cold
[ 0.307206] pci 0000:00:1d.0: [8086:1e26] type 00 class 0x0c0320
[ 0.307228] pci 0000:00:1d.0: reg 0x10: [mem 0xf193f000-0xf193f3ff]
[ 0.307308] pci 0000:00:1d.0: PME# supported from D0 D3hot D3cold
[ 0.307370] pci 0000:00:1f.0: [8086:1e55] type 00 class 0x060100
[ 0.307527] pci 0000:00:1f.2: [8086:1e03] type 00 class 0x010601
[ 0.307546] pci 0000:00:1f.2: reg 0x10: [io 0x3080-0x3087]
[ 0.307554] pci 0000:00:1f.2: reg 0x14: [io 0x3090-0x3093]
[ 0.307562] pci 0000:00:1f.2: reg 0x18: [io 0x3088-0x308f]
[ 0.307570] pci 0000:00:1f.2: reg 0x1c: [io 0x3094-0x3097]
[ 0.307577] pci 0000:00:1f.2: reg 0x20: [io 0x3060-0x307f]
[ 0.307586] pci 0000:00:1f.2: reg 0x24: [mem 0xf193d000-0xf193d7ff]
[ 0.307628] pci 0000:00:1f.2: PME# supported from D3hot
[ 0.307686] pci 0000:00:1f.3: [8086:1e22] type 00 class 0x0c0500
[ 0.307704] pci 0000:00:1f.3: reg 0x10: [mem 0xf1940000-0xf19400ff 64bit]
[ 0.307724] pci 0000:00:1f.3: reg 0x20: [io 0x0400-0x041f]
[ 0.307813] pci 0000:00:01.0: PCI bridge to [bus 01]
[ 0.307903] pci 0000:02:00.0: [168c:0030] type 00 class 0x028000
[ 0.307964] pci 0000:02:00.0: reg 0x10: [mem 0xf1800000-0xf181ffff 64bit]
[ 0.308056] pci 0000:02:00.0: reg 0x30: [mem 0xf1820000-0xf182ffff pref]
[ 0.308187] pci 0000:02:00.0: supports D1
[ 0.308188] pci 0000:02:00.0: PME# supported from D0 D1 D3hot
[ 0.320053] pci 0000:00:1c.0: PCI bridge to [bus 02]
[ 0.320060] pci 0000:00:1c.0: bridge window [mem 0xf1800000-0xf18fffff]
[ 0.320343] pci 0000:03:00.0: [1180:e823] type 00 class 0x080500
[ 0.320382] pci 0000:03:00.0: MMC controller base frequency changed to 50Mhz.
[ 0.320430] pci 0000:03:00.0: reg 0x10: [mem 0xf0800000-0xf08000ff]
[ 0.320740] pci 0000:03:00.0: supports D1 D2
[ 0.320741] pci 0000:03:00.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.332115] pci 0000:00:1c.1: PCI bridge to [bus 03]
[ 0.332119] pci 0000:00:1c.1: bridge window [io 0x2000-0x2fff]
[ 0.332122] pci 0000:00:1c.1: bridge window [mem 0xf0000000-0xf08fffff]
[ 0.332130] pci 0000:00:1c.1: bridge window [mem 0xf0c00000-0xf13fffff 64bit pref]
[ 0.332239] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 10 12 14 15) *11
[ 0.332284] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 *11 12 14 15)
[ 0.332326] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 7 10 12 14 15) *11
[ 0.332368] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 *11 12 14 15)
[ 0.332409] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 10 12 14 15) *11
[ 0.332451] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 *11 12 14 15)
[ 0.332491] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 7 10 12 14 15) *11
[ 0.332532] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 7 *11 12 14 15)
[ 0.333089] ACPI: Enabled 1 GPEs in block 00 to 3F
[ 0.333172] ACPI: EC: interrupt unblocked
[ 0.333178] ACPI: EC: event unblocked
[ 0.333185] ACPI: \_SB_.PCI0.LPCB.EC__: GPE=0x11, EC_CMD/EC_SC=0x66, EC_DATA=0x62
[ 0.333186] ACPI: \_SB_.PCI0.LPCB.EC__: Used as boot DSDT EC to handle transactions and events
[ 0.333238] pci 0000:00:02.0: vgaarb: setting as boot VGA device
[ 0.333238] pci 0000:00:02.0: vgaarb: VGA device added: decodes=io+mem,owns=io+mem,locks=none
[ 0.333238] pci 0000:00:02.0: vgaarb: bridge control possible
[ 0.333238] vgaarb: loaded
[ 0.333238] EDAC MC: Ver: 3.0.0
[ 0.333238] PCI: Using ACPI for IRQ routing
[ 0.333482] PCI: pci_cache_line_size set to 64 bytes
[ 0.333618] e820: reserve RAM buffer [mem 0x7fefa000-0x7fffffff]
[ 0.333620] e820: reserve RAM buffer [mem 0x46f600000-0x46fffffff]
[ 0.333717] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0, 0, 0, 0, 0
[ 0.333717] hpet0: 8 comparators, 64-bit 14.318180 MHz counter
[ 0.337019] clocksource: Switched to clocksource hpet
[ 0.344252] VFS: Disk quotas dquot_6.6.0
[ 0.344271] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[ 0.344341] pnp: PnP ACPI init
[ 0.344424] system 00:00: [mem 0xfed1c000-0xfed1ffff] has been reserved
[ 0.344425] system 00:00: [mem 0xfed10000-0xfed17fff] has been reserved
[ 0.344426] system 00:00: [mem 0xfed18000-0xfed18fff] has been reserved
[ 0.344428] system 00:00: [mem 0xfed19000-0xfed19fff] has been reserved
[ 0.344429] system 00:00: [mem 0xf8000000-0xfbffffff] has been reserved
[ 0.344430] system 00:00: [mem 0xfed20000-0xfed3ffff] has been reserved
[ 0.344432] system 00:00: [mem 0xfed40000-0xfed44fff] has been reserved
[ 0.344433] system 00:00: [mem 0xfed45000-0xfed8ffff] has been reserved
[ 0.344435] system 00:00: [mem 0x20000000-0x201fffff] could not be reserved
[ 0.344437] system 00:00: [mem 0x40000000-0x401fffff] could not be reserved
[ 0.344440] system 00:00: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.344852] system 00:01: [mem 0xfed00000-0xfed003ff] has been reserved
[ 0.344855] system 00:01: Plug and Play ACPI device, IDs PNP0103 PNP0c01 (active)
[ 0.344889] system 00:02: [io 0x0500-0x057f] has been reserved
[ 0.344890] system 00:02: [io 0x0480-0x04bf] has been reserved
[ 0.344892] system 00:02: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.344909] pnp 00:03: Plug and Play ACPI device, IDs PNP0b00 (active)
[ 0.344936] pnp 00:04: Plug and Play ACPI device, IDs PNP0303 PNP030b (active)
[ 0.344961] pnp 00:05: Plug and Play ACPI device, IDs PNP0f13 (active)
[ 0.344984] pnp 00:06: Plug and Play ACPI device, IDs PNP0c31 (active)
[ 0.345001] pnp: PnP ACPI: found 7 devices
[ 0.351299] clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns
[ 0.351331] pci 0000:00:01.0: PCI bridge to [bus 01]
[ 0.351336] pci 0000:00:1c.0: PCI bridge to [bus 02]
[ 0.351343] pci 0000:00:1c.0: bridge window [mem 0xf1800000-0xf18fffff]
[ 0.351355] pci 0000:00:1c.1: PCI bridge to [bus 03]
[ 0.351358] pci 0000:00:1c.1: bridge window [io 0x2000-0x2fff]
[ 0.351363] pci 0000:00:1c.1: bridge window [mem 0xf0000000-0xf08fffff]
[ 0.351368] pci 0000:00:1c.1: bridge window [mem 0xf0c00000-0xf13fffff 64bit pref]
[ 0.351377] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7 window]
[ 0.351378] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff window]
[ 0.351379] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff window]
[ 0.351380] pci_bus 0000:00: resource 7 [mem 0x000c0000-0x000c3fff window]
[ 0.351381] pci_bus 0000:00: resource 8 [mem 0x000c4000-0x000c7fff window]
[ 0.351382] pci_bus 0000:00: resource 9 [mem 0x000c8000-0x000cbfff window]
[ 0.351383] pci_bus 0000:00: resource 10 [mem 0x000cc000-0x000cffff window]
[ 0.351385] pci_bus 0000:00: resource 11 [mem 0x000d0000-0x000d3fff window]
[ 0.351386] pci_bus 0000:00: resource 12 [mem 0x000d4000-0x000d7fff window]
[ 0.351387] pci_bus 0000:00: resource 13 [mem 0x000d8000-0x000dbfff window]
[ 0.351388] pci_bus 0000:00: resource 14 [mem 0x000dc000-0x000dffff window]
[ 0.351389] pci_bus 0000:00: resource 15 [mem 0x000e0000-0x000e3fff window]
[ 0.351390] pci_bus 0000:00: resource 16 [mem 0x000e4000-0x000e7fff window]
[ 0.351391] pci_bus 0000:00: resource 17 [mem 0x000e8000-0x000ebfff window]
[ 0.351392] pci_bus 0000:00: resource 18 [mem 0x000ec000-0x000effff window]
[ 0.351393] pci_bus 0000:00: resource 19 [mem 0x000f0000-0x000fffff window]
[ 0.351394] pci_bus 0000:00: resource 20 [mem 0x8ea00001-0xf7ffffff window]
[ 0.351395] pci_bus 0000:00: resource 21 [mem 0xfed40000-0xfed44fff window]
[ 0.351397] pci_bus 0000:02: resource 1 [mem 0xf1800000-0xf18fffff]
[ 0.351398] pci_bus 0000:03: resource 0 [io 0x2000-0x2fff]
[ 0.351399] pci_bus 0000:03: resource 1 [mem 0xf0000000-0xf08fffff]
[ 0.351400] pci_bus 0000:03: resource 2 [mem 0xf0c00000-0xf13fffff 64bit pref]
[ 0.351465] NET: Registered protocol family 2
[ 0.351623] TCP established hash table entries: 131072 (order: 8, 1048576 bytes)
[ 0.351811] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
[ 0.351923] TCP: Hash tables configured (established 131072 bind 65536)
[ 0.351957] UDP hash table entries: 8192 (order: 6, 262144 bytes)
[ 0.351995] UDP-Lite hash table entries: 8192 (order: 6, 262144 bytes)
[ 0.352082] NET: Registered protocol family 1
[ 0.352095] pci 0000:00:02.0: Video device with shadowed ROM at [mem 0x000c0000-0x000dffff]
[ 0.352691] PCI: CLS 64 bytes, default 64
[ 0.352727] Unpacking initramfs...
[ 0.693231] Freeing initrd memory: 21096K
[ 0.693326] PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
[ 0.693329] software IO TLB [mem 0x7befa000-0x7fefa000] (64MB) mapped at [ffff9f437befa000-ffff9f437fef9fff]
[ 0.693654] audit: initializing netlink subsys (disabled)
[ 0.693708] audit: type=2000 audit(1508861012.693:1): state=initialized audit_enabled=0 res=1
[ 0.693991] workingset: timestamp_bits=40 max_order=22 bucket_order=0
[ 0.694034] zbud: loaded
[ 1.013507] Key type asymmetric registered
[ 1.013508] Asymmetric key parser 'x509' registered
[ 1.013523] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 249)
[ 1.013559] io scheduler noop registered
[ 1.013560] io scheduler deadline registered
[ 1.013568] io scheduler cfq registered (default)
[ 1.013568] io scheduler mq-deadline registered
[ 1.014249] pcieport 0000:00:01.0: Signaling PME with IRQ 26
[ 1.014269] pcieport 0000:00:1c.0: Signaling PME with IRQ 27
[ 1.014290] pcieport 0000:00:1c.1: Signaling PME with IRQ 28
[ 1.014310] pciehp 0000:00:1c.1:pcie004: Slot #0 AttnBtn- PwrCtrl- MRL- AttnInd- PwrInd- HotPlug+ Surprise+ Interlock- NoCompl+ LLActRep+
[ 1.014351] efifb: probing for efifb
[ 1.014363] efifb: framebuffer at 0xe0000000, using 5632k, total 5632k
[ 1.014364] efifb: mode is 1600x900x32, linelength=6400, pages=1
[ 1.014365] efifb: scrolling: redraw
[ 1.014366] efifb: Truecolor: size=8:8:8:8, shift=24:16:8:0
[ 1.017362] Console: switching to colour frame buffer device 200x56
[ 1.020253] fb0: EFI VGA frame buffer device
[ 1.020261] intel_idle: MWAIT substates: 0x21120
[ 1.020262] intel_idle: v0.4.1 model 0x3A
[ 1.020401] intel_idle: lapic_timer_reliable_states 0xffffffff
[ 1.020708] GHES: HEST is not enabled!
[ 1.020759] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
[ 1.021109] Linux agpgart interface v0.103
[ 1.036054] tpm_tis 00:06: 1.2 TPM (device-id 0x0, rev-id 78)
[ 1.116366] AMD IOMMUv2 driver by Joerg Roedel <jroedel@suse.de>
[ 1.116367] AMD IOMMUv2 functionality not available on this system
[ 1.116836] i8042: PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at 0x60,0x64 irq 1,12
[ 1.118788] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 1.118793] serio: i8042 AUX port at 0x60,0x64 irq 12
[ 1.119022] mousedev: PS/2 mouse device common for all mice
[ 1.119070] rtc_cmos 00:03: RTC can wake from S4
[ 1.119256] rtc_cmos 00:03: rtc core: registered rtc_cmos as rtc0
[ 1.119287] rtc_cmos 00:03: alarms up to one month, 242 bytes nvram, hpet irqs
[ 1.119295] intel_pstate: Intel P-state driver initializing
[ 1.119609] ledtrig-cpu: registered to indicate activity on CPUs
[ 1.119934] NET: Registered protocol family 10
[ 1.120289] Segment Routing with IPv6
[ 1.120320] mip6: Mobile IPv6
[ 1.120323] NET: Registered protocol family 17
[ 1.120327] mpls_gso: MPLS GSO support
[ 1.120423] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input0
[ 1.121061] microcode: sig=0x306a9, pf=0x10, revision=0x1b
[ 1.121168] microcode: Microcode Update Driver: v2.2.
[ 1.121184] sched_clock: Marking stable (1121154243, 0)->(1119606679, 1547564)
[ 1.121623] registered taskstats version 1
[ 1.121653] zswap: loaded using pool lzo/zbud
[ 1.280668] rtc_cmos 00:03: setting system clock to 2017-10-24 16:03:33 UTC (1508861013)
[ 1.280715] PM: Hibernation image not present or could not be loaded.
[ 1.284172] Freeing unused kernel memory: 1472K
[ 1.284173] Write protecting the kernel read-only data: 12288k
[ 1.284923] Freeing unused kernel memory: 1592K
[ 1.289557] Freeing unused kernel memory: 1132K
[ 1.292380] x86/mm: Checked W+X mappings: passed, no W+X pages found.
[ 1.385888] (NULL device *): hwmon_device_register() is deprecated. Please convert the driver to use hwmon_device_register_with_info().
[ 1.386165] thermal LNXTHERM:00: registered as thermal_zone0
[ 1.386167] ACPI: Thermal Zone [THM0] (56 C)
[ 1.386394] pps_core: LinuxPPS API ver. 1 registered
[ 1.386395] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it>
[ 1.386697] PTP clock support registered
[ 1.386850] thermal LNXTHERM:01: registered as thermal_zone1
[ 1.386851] ACPI: Thermal Zone [THM1] (27 C)
[ 1.387299] ACPI: bus type USB registered
[ 1.387317] usbcore: registered new interface driver usbfs
[ 1.387323] usbcore: registered new interface driver hub
[ 1.387346] usbcore: registered new device driver usb
[ 1.387564] e1000e: Intel(R) PRO/1000 Network Driver - 3.2.6-k
[ 1.387565] e1000e: Copyright(c) 1999 - 2015 Intel Corporation.
[ 1.387630] e1000e 0000:00:19.0: Interrupt Throttling Rate (ints/sec) set to dynamic conservative mode
[ 1.389232] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 1.389403] ehci-pci: EHCI PCI platform driver
[ 1.390409] sdhci: Secure Digital Host Controller Interface driver
[ 1.390410] sdhci: Copyright(c) Pierre Ossman
[ 1.390642] sdhci-pci 0000:03:00.0: SDHCI controller found [1180:e823] (rev 4)
[ 1.391178] sdhci-pci 0000:03:00.0: Will use DMA mode even though HW doesn't fully claim to support it.
[ 1.391299] mmc0: SDHCI controller on PCI [0000:03:00.0] using DMA
[ 1.392346] SCSI subsystem initialized
[ 1.393479] libata version 3.00 loaded.
[ 1.403207] AVX version of gcm_enc/dec engaged.
[ 1.403208] AES CTR mode by8 optimization enabled
[ 1.533861] e1000e 0000:00:19.0 0000:00:19.0 (uninitialized): registered PHC clock
[ 1.658771] e1000e 0000:00:19.0 eth0: (PCI Express:2.5GT/s:Width x1) 3c:97:0e:84:1e:a5
[ 1.658773] e1000e 0000:00:19.0 eth0: Intel(R) PRO/1000 Network Connection
[ 1.658827] e1000e 0000:00:19.0 eth0: MAC: 10, PHY: 11, PBA No: 1000FF-0FF
[ 1.659090] xhci_hcd 0000:00:14.0: xHCI Host Controller
[ 1.659098] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 1
[ 1.660221] xhci_hcd 0000:00:14.0: hcc params 0x200071a1 hci version 0x100 quirks 0x0000b930
[ 1.660229] xhci_hcd 0000:00:14.0: cache line size of 64 is not supported
[ 1.660466] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
[ 1.660467] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.660469] usb usb1: Product: xHCI Host Controller
[ 1.660469] usb usb1: Manufacturer: Linux 4.13.0-1-amd64 xhci-hcd
[ 1.660470] usb usb1: SerialNumber: 0000:00:14.0
[ 1.660569] hub 1-0:1.0: USB hub found
[ 1.660586] hub 1-0:1.0: 4 ports detected
[ 1.660701] xhci_hcd 0000:00:14.0: xHCI Host Controller
[ 1.660704] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 2
[ 1.660763] usb usb2: New USB device found, idVendor=1d6b, idProduct=0003
[ 1.660764] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.660765] usb usb2: Product: xHCI Host Controller
[ 1.660766] usb usb2: Manufacturer: Linux 4.13.0-1-amd64 xhci-hcd
[ 1.660766] usb usb2: SerialNumber: 0000:00:14.0
[ 1.660843] hub 2-0:1.0: USB hub found
[ 1.660859] hub 2-0:1.0: 4 ports detected
[ 1.661098] ehci-pci 0000:00:1a.0: EHCI Host Controller
[ 1.661104] ehci-pci 0000:00:1a.0: new USB bus registered, assigned bus number 3
[ 1.661118] ehci-pci 0000:00:1a.0: debug port 2
[ 1.665016] ehci-pci 0000:00:1a.0: cache line size of 64 is not supported
[ 1.665032] ehci-pci 0000:00:1a.0: irq 21, io mem 0xf193e000
[ 1.680093] ehci-pci 0000:00:1a.0: USB 2.0 started, EHCI 1.00
[ 1.680137] usb usb3: New USB device found, idVendor=1d6b, idProduct=0002
[ 1.680138] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.680140] usb usb3: Product: EHCI Host Controller
[ 1.680141] usb usb3: Manufacturer: Linux 4.13.0-1-amd64 ehci_hcd
[ 1.680142] usb usb3: SerialNumber: 0000:00:1a.0
[ 1.680408] hub 3-0:1.0: USB hub found
[ 1.680419] hub 3-0:1.0: 3 ports detected
[ 1.680707] ehci-pci 0000:00:1d.0: EHCI Host Controller
[ 1.680713] ehci-pci 0000:00:1d.0: new USB bus registered, assigned bus number 4
[ 1.680725] ehci-pci 0000:00:1d.0: debug port 2
[ 1.684642] ehci-pci 0000:00:1d.0: cache line size of 64 is not supported
[ 1.684682] ehci-pci 0000:00:1d.0: irq 19, io mem 0xf193f000
[ 1.696093] tsc: Refined TSC clocksource calibration: 2594.107 MHz
[ 1.696104] clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x25647d583cf, max_idle_ns: 440795304232 ns
[ 1.700079] ehci-pci 0000:00:1d.0: USB 2.0 started, EHCI 1.00
[ 1.700161] usb usb4: New USB device found, idVendor=1d6b, idProduct=0002
[ 1.700164] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.700166] usb usb4: Product: EHCI Host Controller
[ 1.700168] usb usb4: Manufacturer: Linux 4.13.0-1-amd64 ehci_hcd
[ 1.700169] usb usb4: SerialNumber: 0000:00:1d.0
[ 1.700407] hub 4-0:1.0: USB hub found
[ 1.700416] hub 4-0:1.0: 3 ports detected
[ 1.700855] i801_smbus 0000:00:1f.3: SMBus using PCI interrupt
[ 1.701763] ahci 0000:00:1f.2: version 3.0
[ 1.702123] ahci 0000:00:1f.2: SSS flag set, parallel bus scan disabled
[ 1.712252] ahci 0000:00:1f.2: AHCI 0001.0300 32 slots 6 ports 6 Gbps 0x17 impl SATA mode
[ 1.712257] ahci 0000:00:1f.2: flags: 64bit ncq sntf ilck stag pm led clo pio slum part apst
[ 1.713744] scsi host0: ahci
[ 1.714072] scsi host1: ahci
[ 1.714428] scsi host2: ahci
[ 1.714636] scsi host3: ahci
[ 1.714871] scsi host4: ahci
[ 1.715032] scsi host5: ahci
[ 1.715100] ata1: SATA max UDMA/133 abar m2048@0xf193d000 port 0xf193d100 irq 31
[ 1.715103] ata2: SATA max UDMA/133 abar m2048@0xf193d000 port 0xf193d180 irq 31
[ 1.715106] ata3: SATA max UDMA/133 abar m2048@0xf193d000 port 0xf193d200 irq 31
[ 1.715108] ata4: DUMMY
[ 1.715111] ata5: SATA max UDMA/133 abar m2048@0xf193d000 port 0xf193d300 irq 31
[ 1.715112] ata6: DUMMY
[ 1.988072] usb 1-4: new high-speed USB device number 2 using xhci_hcd
[ 2.008069] usb 3-1: new high-speed USB device number 2 using ehci-pci
[ 2.028067] usb 4-1: new high-speed USB device number 2 using ehci-pci
[ 2.030764] ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
[ 2.033049] ata1.00: ATA-8: LITEONIT LSS-32L6G-HP, DS51704, max UDMA/133
[ 2.033052] ata1.00: 62533296 sectors, multi 1: LBA48 NCQ (depth 31/32), AA
[ 2.033533] ata1.00: configured for UDMA/133
[ 2.033837] scsi 0:0:0:0: Direct-Access ATA LITEONIT LSS-32L 704 PQ: 0 ANSI: 5
[ 2.111624] psmouse serio1: synaptics: queried max coordinates: x [..5470], y [..4498]
[ 2.131124] usb 1-4: config 1 has an invalid interface number: 12 but max is 4
[ 2.131127] usb 1-4: config 1 has an invalid interface number: 13 but max is 4
[ 2.131129] usb 1-4: config 1 has an invalid interface number: 13 but max is 4
[ 2.131131] usb 1-4: config 1 has no interface number 1
[ 2.131133] usb 1-4: config 1 has no interface number 4
[ 2.132177] usb 1-4: New USB device found, idVendor=1199, idProduct=9071
[ 2.132180] usb 1-4: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[ 2.132183] usb 1-4: Product: Sierra Wireless MC7430 Qualcomm® Snapdragon™ X7 LTE-A
[ 2.132185] usb 1-4: Manufacturer: Sierra Wireless, Incorporated
[ 2.132187] usb 1-4: SerialNumber: LU55030047011009
[ 2.156517] usb 3-1: New USB device found, idVendor=8087, idProduct=0024
[ 2.156521] usb 3-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[ 2.156972] hub 3-1:1.0: USB hub found
[ 2.157096] hub 3-1:1.0: 6 ports detected
[ 2.171507] psmouse serio1: synaptics: Touchpad model: 1, fw: 7.2, id: 0x1c0b1, caps: 0xd047b1/0xb40000/0xa0000/0x0, board id: 0, fw id: 920262
[ 2.171517] psmouse serio1: synaptics: serio: Synaptics pass-through port at isa0060/serio1/input0
[ 2.176491] usb 4-1: New USB device found, idVendor=8087, idProduct=0024
[ 2.176494] usb 4-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[ 2.176946] hub 4-1:1.0: USB hub found
[ 2.177086] hub 4-1:1.0: 8 ports detected
[ 2.209947] input: SynPS/2 Synaptics TouchPad as /devices/platform/i8042/serio1/input/input2
[ 2.378772] ata2: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
[ 2.379483] ata2.00: ATA-9: WDC WD10SPCX-08HWST0, 01.01A01, max UDMA/133
[ 2.379487] ata2.00: 1953525168 sectors, multi 0: LBA48 NCQ (depth 31/32), AA
[ 2.380205] ata2.00: configured for UDMA/133
[ 2.380497] scsi 1:0:0:0: Direct-Access ATA WDC WD10SPCX-08H 1A01 PQ: 0 ANSI: 5
[ 2.444071] usb 3-1.3: new full-speed USB device number 3 using ehci-pci
[ 2.464067] usb 4-1.5: new high-speed USB device number 3 using ehci-pci
[ 2.553514] usb 3-1.3: New USB device found, idVendor=147e, idProduct=2020
[ 2.553517] usb 3-1.3: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[ 2.553519] usb 3-1.3: Product: Biometric Coprocessor
[ 2.553521] usb 3-1.3: Manufacturer: Auth
[ 2.572489] usb 4-1.5: New USB device found, idVendor=17ef, idProduct=100a
[ 2.572492] usb 4-1.5: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[ 2.572914] hub 4-1.5:1.0: USB hub found
[ 2.573079] hub 4-1.5:1.0: 6 ports detected
[ 2.632069] usb 3-1.4: new full-speed USB device number 4 using ehci-pci
[ 2.720166] clocksource: Switched to clocksource tsc
[ 2.726759] ata3: SATA link down (SStatus 0 SControl 300)
[ 2.744738] usb 3-1.4: New USB device found, idVendor=0a5c, idProduct=217f
[ 2.744741] usb 3-1.4: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[ 2.744743] usb 3-1.4: Product: Broadcom Bluetooth Device
[ 2.744745] usb 3-1.4: Manufacturer: Broadcom Corp
[ 2.744747] usb 3-1.4: SerialNumber: 7CE9D3B7FC24
[ 2.824060] usb 3-1.6: new high-speed USB device number 5 using ehci-pci
[ 2.844237] psmouse serio2: trackpoint: IBM TrackPoint firmware: 0x0e, buttons: 3/3
[ 2.939880] usb 3-1.6: New USB device found, idVendor=5986, idProduct=02d5
[ 2.939883] usb 3-1.6: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[ 2.939886] usb 3-1.6: Product: Integrated Camera
[ 2.939888] usb 3-1.6: Manufacturer: Ricoh Company Ltd.
[ 3.038557] ata5: SATA link down (SStatus 0 SControl 300)
[ 3.040933] input: TPPS/2 IBM TrackPoint as /devices/platform/i8042/serio1/serio2/input/input3
[ 3.043878] sd 0:0:0:0: [sda] 62533296 512-byte logical blocks: (32.0 GB/29.8 GiB)
[ 3.043906] sd 1:0:0:0: [sdb] 1953525168 512-byte logical blocks: (1.00 TB/932 GiB)
[ 3.043908] sd 0:0:0:0: [sda] Write Protect is off
[ 3.043910] sd 1:0:0:0: [sdb] 4096-byte physical blocks
[ 3.043913] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 3.043938] sd 1:0:0:0: [sdb] Write Protect is off
[ 3.043943] sd 1:0:0:0: [sdb] Mode Sense: 00 3a 00 00
[ 3.043960] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 3.043989] sd 1:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 3.048064] sda: sda1 sda2 sda3 sda5 sda6 sda7
[ 3.049315] sd 0:0:0:0: [sda] Attached SCSI disk
[ 3.459068] sdb: sdb1 sdb2 sdb3 sdb4 sdb5 sdb6 sdb7 sdb8
[ 3.459970] sd 1:0:0:0: [sdb] Attached SCSI disk
[ 4.696034] raid6: sse2x1 gen() 8772 MB/s
[ 4.764031] raid6: sse2x1 xor() 6967 MB/s
[ 4.832028] raid6: sse2x2 gen() 11113 MB/s
[ 4.900027] raid6: sse2x2 xor() 8002 MB/s
[ 4.968034] raid6: sse2x4 gen() 13106 MB/s
[ 5.036027] raid6: sse2x4 xor() 9736 MB/s
[ 5.036028] raid6: using algorithm sse2x4 gen() 13106 MB/s
[ 5.036028] raid6: .... xor() 9736 MB/s, rmw enabled
[ 5.036029] raid6: using ssse3x2 recovery algorithm
[ 5.036207] xor: automatically using best checksumming function avx
[ 5.036374] async_tx: api initialized (async)
[ 5.052095] Btrfs loaded, crc32c=crc32c-intel
[ 5.698917] PM: Starting manual resume from disk
[ 5.698922] PM: Hibernation image partition 8:18 present
[ 5.698924] PM: Looking for hibernation image.
[ 5.699106] PM: Image not found (code -22)
[ 5.699108] PM: Hibernation image not present or could not be loaded.
[ 5.842264] EXT4-fs (sda5): mounted filesystem with ordered data mode. Opts: (null)
[ 5.962639] ip_tables: (C) 2000-2006 Netfilter Core Team
[ 5.968384] systemd[1]: systemd 235 running in system mode. (+PAM +AUDIT +SELINUX +IMA +APPARMOR +SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ +LZ4 +SECCOMP +BLKID +ELFUTILS +KMOD -IDN2 +IDN default-hierarchy=hybrid)
[ 5.968520] systemd[1]: Detected architecture x86-64.
[ 5.968687] systemd[1]: Set hostname to <universi-mcbk52>.
[ 6.038720] random: crng init done
[ 6.096481] systemd[1]: Set up automount Arbitrary Executable File Formats File System Automount Point.
[ 6.096533] systemd[1]: Started Forward Password Requests to Wall Directory Watch.
[ 6.096647] systemd[1]: Created slice System Slice.
[ 6.096737] systemd[1]: Created slice system-systemd\x2dfsck.slice.
[ 6.096789] systemd[1]: Listening on Journal Audit Socket.
[ 6.097183] systemd[1]: Mounting RPC Pipe File System...
[ 6.097240] systemd[1]: Listening on Device-mapper event daemon FIFOs.
[ 6.119201] EXT4-fs (sda5): re-mounted. Opts: discard,user_xattr,errors=remount-ro
[ 6.124253] RPC: Registered named UNIX socket transport module.
[ 6.124254] RPC: Registered udp transport module.
[ 6.124255] RPC: Registered tcp transport module.
[ 6.124256] RPC: Registered tcp NFSv4.1 backchannel transport module.
[ 6.142396] lp: driver loaded but no devices found
[ 6.149272] ppdev: user-space parallel port driver
[ 6.242315] input: Sleep Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/device:1f/PNP0C09:00/PNP0C0E:00/input/input4
[ 6.242335] ACPI: Sleep Button [SLPB]
[ 6.242481] input: Lid Switch as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/device:1f/PNP0C09:00/PNP0C0D:00/input/input5
[ 6.242565] ACPI: Lid Switch [LID]
[ 6.242611] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input6
[ 6.242620] ACPI: Power Button [PWRF]
[ 6.249236] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[ 6.312398] ACPI: AC Adapter [AC] (on-line)
[ 6.313474] sd 0:0:0:0: Attached scsi generic sg0 type 0
[ 6.313514] sd 1:0:0:0: Attached scsi generic sg1 type 0
[ 6.314121] ACPI Warning: SystemIO range 0x0000000000000528-0x000000000000052F conflicts with OpRegion 0x0000000000000500-0x000000000000057F (\PMIO) (20170531/utaddress-247)
[ 6.314126] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[ 6.314129] ACPI Warning: SystemIO range 0x00000000000004C0-0x00000000000004CF conflicts with OpRegion 0x0000000000000480-0x00000000000004EB (\GPIO) (20170531/utaddress-247)
[ 6.314133] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[ 6.314134] ACPI Warning: SystemIO range 0x00000000000004B0-0x00000000000004BF conflicts with OpRegion 0x0000000000000480-0x00000000000004EB (\GPIO) (20170531/utaddress-247)
[ 6.314137] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[ 6.314138] ACPI Warning: SystemIO range 0x0000000000000480-0x00000000000004AF conflicts with OpRegion 0x0000000000000480-0x00000000000004EB (\GPIO) (20170531/utaddress-247)
[ 6.314141] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[ 6.314141] lpc_ich: Resource conflict(s) found affecting gpio_ich
[ 6.316861] Non-volatile memory driver v1.3
[ 6.320409] thinkpad_acpi: ThinkPad ACPI Extras v0.25
[ 6.320411] thinkpad_acpi: http://ibm-acpi.sf.net/
[ 6.320412] thinkpad_acpi: ThinkPad BIOS CBET4000 4.6-1897-gaa8e5d36b1, EC G7HT39WW-3.22
[ 6.320412] thinkpad_acpi: Lenovo ThinkPad T430s, model 23539LU
[ 6.321013] thinkpad_hwmon thinkpad_hwmon: hwmon_device_register() is deprecated. Please convert the driver to use hwmon_device_register_with_info().
[ 6.321205] thinkpad_acpi: Tablet mode switch found (type: MHKG), currently in laptop mode
[ 6.321319] thinkpad_acpi: This ThinkPad has standard ACPI backlight brightness control, supported by the ACPI video driver
[ 6.321320] thinkpad_acpi: Disabling thinkpad-acpi brightness events by default...
[ 6.326803] ACPI: Battery Slot [BAT0] (battery present)
[ 6.327350] ACPI: Battery Slot [BAT1] (battery absent)
[ 6.329297] thinkpad_acpi: Standard ACPI backlight interface available, not loading native one
[ 6.329380] thinkpad_acpi: Console audio control enabled, mode: monitor (read only)
[ 6.333770] input: ThinkPad Extra Buttons as /devices/platform/thinkpad_acpi/input/input7
[ 6.366669] input: PC Speaker as /devices/platform/pcspkr/input/input8
[ 6.375766] ath: phy0: Killer Wireless card detected
[ 6.381100] [drm] Memory usable by graphics device = 2048M
[ 6.381103] checking generic (e0000000 580000) vs hw (e0000000 10000000)
[ 6.381103] fb: switching to inteldrmfb from EFI VGA
[ 6.381144] Console: switching to colour dummy device 80x25
[ 6.387133] RAPL PMU: API unit is 2^-32 Joules, 3 fixed counters, 163840 ms ovfl timer
[ 6.387134] RAPL PMU: hw unit of domain pp0-core 2^-16 Joules
[ 6.387135] RAPL PMU: hw unit of domain package 2^-16 Joules
[ 6.387136] RAPL PMU: hw unit of domain pp1-gpu 2^-16 Joules
[ 6.390174] [drm] Replacing VGA console driver
[ 6.397428] ath: phy0: ASPM enabled: 0x43
[ 6.397430] ath: EEPROM regdomain: 0x60
[ 6.397431] ath: EEPROM indicates we should expect a direct regpair map
[ 6.397432] ath: Country alpha2 being used: 00
[ 6.397432] ath: Regpair used: 0x60
[ 6.407439] ieee80211 phy0: Selected rate control algorithm 'minstrel_ht'
[ 6.407726] ieee80211 phy0: Atheros AR9300 Rev:3 mem=0xffffacb542640000, irq=17
[ 6.429906] EXT4-fs (sda3): mounting ext2 file system using the ext4 subsystem
[ 6.430945] EXT4-fs (sda3): mounted filesystem without journal. Opts: user_xattr
[ 6.434287] EXT4-fs (sda7): mounted filesystem with ordered data mode. Opts: discard,user_xattr
[ 6.449587] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
[ 6.449588] [drm] Driver supports precise vblank timestamp query.
[ 6.449860] i915 0000:00:02.0: vgaarb: changed VGA decodes: olddecodes=io+mem,decodes=io+mem:owns=io+mem
[ 6.524051] [drm] Initialized i915 1.6.0 20170619 for 0000:00:02.0 on minor 0
[ 6.524172] ACPI: Video Device [GFX0] (multi-head: yes rom: no post: no)
[ 6.525261] acpi device:03: registered as cooling_device4
[ 6.525303] input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:00/input/input9
[ 6.736698] snd_hda_intel 0000:00:1b.0: bound 0000:00:02.0 (ops i915_audio_component_bind_ops [i915])
[ 6.750406] snd_hda_codec_realtek hdaudioC0D0: autoconfig for ALC269VC: line_outs=1 (0x14/0x0/0x0/0x0/0x0) type:speaker
[ 6.750408] snd_hda_codec_realtek hdaudioC0D0: speaker_outs=0 (0x0/0x0/0x0/0x0/0x0)
[ 6.750409] snd_hda_codec_realtek hdaudioC0D0: hp_outs=2 (0x15/0x1b/0x0/0x0/0x0)
[ 6.750410] snd_hda_codec_realtek hdaudioC0D0: mono: mono_out=0x0
[ 6.750411] snd_hda_codec_realtek hdaudioC0D0: inputs:
[ 6.750412] snd_hda_codec_realtek hdaudioC0D0: Mic=0x18
[ 6.750413] snd_hda_codec_realtek hdaudioC0D0: Dock Mic=0x19
[ 6.750414] snd_hda_codec_realtek hdaudioC0D0: Internal Mic=0x12
[ 6.762073] intel_rapl: Found RAPL domain package
[ 6.762075] intel_rapl: Found RAPL domain core
[ 6.762076] intel_rapl: Found RAPL domain uncore
[ 6.764566] input: HDA Digital PCBeep as /devices/pci0000:00/0000:00:1b.0/sound/card0/input10
[ 6.765239] input: HDA Intel PCH Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input11
[ 6.765291] input: HDA Intel PCH Dock Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input12
[ 6.765341] input: HDA Intel PCH Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card0/input13
[ 6.765391] input: HDA Intel PCH Dock Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card0/input14
[ 6.765441] input: HDA Intel PCH HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:1b.0/sound/card0/input15
[ 6.765490] input: HDA Intel PCH HDMI/DP,pcm=7 as /devices/pci0000:00/0000:00:1b.0/sound/card0/input16
[ 6.765539] input: HDA Intel PCH HDMI/DP,pcm=8 as /devices/pci0000:00/0000:00:1b.0/sound/card0/input17
[ 6.880622] iTCO_vendor_support: vendor-support=0
[ 6.881074] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.11
[ 6.881119] iTCO_wdt: Found a Panther Point TCO device (Version=2, TCOBASE=0x0560)
[ 6.881223] iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0)
[ 6.944131] fbcon: inteldrmfb (fb0) is primary device
[ 7.056544] Adding 8389628k swap on /dev/sdb2. Priority:-1 extents:1 across:8389628k FS
[ 7.375652] usbcore: registered new interface driver cdc_ncm
[ 7.376243] usbcore: registered new interface driver cdc_wdm
[ 7.396874] cdc_mbim 1-4:1.12: cdc-wdm0: USB WDM device
[ 7.396992] cdc_mbim 1-4:1.12 wwan0: register 'cdc_mbim' at usb-0000:00:14.0-4, CDC MBIM, 9a:9f:f3:dc:cc:c1
[ 7.397009] usbcore: registered new interface driver cdc_mbim
[ 7.746407] Console: switching to colour frame buffer device 200x56
[ 7.769157] i915 0000:00:02.0: fb0: inteldrmfb frame buffer device
[ 7.769344] usbcore: registered new interface driver usbserial
[ 7.769360] usbcore: registered new interface driver usbserial_generic
[ 7.769371] usbserial: USB Serial support registered for generic
[ 7.773486] usbcore: registered new interface driver qcserial
[ 7.773508] usbserial: USB Serial support registered for Qualcomm USB modem
[ 7.773902] qcserial 1-4:1.0: Qualcomm USB modem converter detected
[ 7.774121] usb 1-4: Qualcomm USB modem converter now attached to ttyUSB0
[ 7.774449] qcserial 1-4:1.2: Qualcomm USB modem converter detected
[ 7.774502] usb 1-4: Qualcomm USB modem converter now attached to ttyUSB1
[ 7.774728] qcserial 1-4:1.3: Qualcomm USB modem converter detected
[ 7.774770] usb 1-4: Qualcomm USB modem converter now attached to ttyUSB2
[ 7.777010] cdc_mbim 1-4:1.12 wwp0s20u4i12: renamed from wwan0
[ 7.870758] media: Linux media interface: v0.10
[ 7.874388] Linux video capture interface: v2.00
[ 7.891127] Bluetooth: Core ver 2.22
[ 7.891140] NET: Registered protocol family 31
[ 7.891140] Bluetooth: HCI device and connection manager initialized
[ 7.891144] Bluetooth: HCI socket layer initialized
[ 7.891145] Bluetooth: L2CAP socket layer initialized
[ 7.891157] Bluetooth: SCO socket layer initialized
[ 7.952851] uvcvideo: Found UVC 1.00 device Integrated Camera (5986:02d5)
[ 7.954684] uvcvideo 3-1.6:1.0: Entity type for entity Extension 4 was not initialized!
[ 7.954687] uvcvideo 3-1.6:1.0: Entity type for entity Extension 3 was not initialized!
[ 7.954690] uvcvideo 3-1.6:1.0: Entity type for entity Processing 2 was not initialized!
[ 7.954692] uvcvideo 3-1.6:1.0: Entity type for entity Camera 1 was not initialized!
[ 7.954834] input: Integrated Camera: Integrated C as /devices/pci0000:00/0000:00:1a.0/usb3/3-1/3-1.6/3-1.6:1.0/input/input18
[ 7.954923] usbcore: registered new interface driver uvcvideo
[ 7.954925] USB Video Class driver (1.1.1)
[ 7.963827] usbcore: registered new interface driver btusb
[ 8.179911] EXT4-fs (sdb3): mounted filesystem with ordered data mode. Opts: user_xattr
[ 8.695357] EXT4-fs (sdb5): mounted filesystem with ordered data mode. Opts: user_xattr
[ 8.768298] systemd-journald[306]: Received request to flush runtime journal from PID 1
[ 8.770587] EXT4-fs (sda6): mounted filesystem with ordered data mode. Opts: discard,user_xattr
[ 9.108992] EXT4-fs (sdb4): mounted filesystem with ordered data mode. Opts: user_xattr
[ 10.100135] EXT4-fs (sdb7): mounted filesystem with ordered data mode. Opts: user_xattr
[ 10.154211] EXT4-fs (sdb6): mounted filesystem with ordered data mode. Opts: user_xattr
[ 10.366478] EXT4-fs (sdb8): mounted filesystem with ordered data mode. Opts: user_xattr
[ 11.039954] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
[ 11.039955] Bluetooth: BNEP filters: protocol multicast
[ 11.039959] Bluetooth: BNEP socket layer initialized
[ 11.048990] nfc: nfc_init: NFC Core ver 0.1
[ 11.051120] NET: Registered protocol family 39
[ 11.146779] ata1.00: configured for UDMA/133
[ 11.146782] ata1: EH complete
[ 11.204054] ata2.00: configured for UDMA/133
[ 11.204060] ata2: EH complete
[ 14.286193] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 14.548184] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 14.556507] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
[ 14.567155] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
[ 14.583557] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
[ 14.911729] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
[ 17.573914] ip6_tables: (C) 2000-2006 Netfilter Core Team
[ 17.586615] Ebtables v2.0 registered
[ 18.754946] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
[ 18.789202] wlan0: authenticate with f8:1a:67:5a:c4:75
[ 18.800124] wlan0: send auth to f8:1a:67:5a:c4:75 (try 1/3)
[ 18.801992] wlan0: authenticated
[ 18.804073] wlan0: associate with f8:1a:67:5a:c4:75 (try 1/3)
[ 18.805797] wlan0: RX AssocResp from f8:1a:67:5a:c4:75 (capab=0x11 status=0 aid=2)
[ 18.805938] wlan0: associated
[ 18.806016] IPv6: ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
[ 18.819365] ath: EEPROM regdomain: 0x809c
[ 18.819367] ath: EEPROM indicates we should expect a country code
[ 18.819368] ath: doing EEPROM country->regdmn map search
[ 18.819369] ath: country maps to regdmn code: 0x52
[ 18.819370] ath: Country alpha2 being used: CN
[ 18.819371] ath: Regpair used: 0x52
[ 18.819372] ath: regdomain 0x809c dynamically updated by country IE
[ 23.013270] vboxdrv: loading out-of-tree module taints kernel.
[ 23.019117] vboxdrv: Found 4 processor cores
[ 23.044096] vboxdrv: TSC mode is Invariant, tentative frequency 2594090518 Hz
[ 23.044097] vboxdrv: Successfully loaded version 5.1.28_Debian (interface 0x002a0000)
[ 23.061483] VBoxNetFlt: Successfully started.
[ 23.070806] VBoxNetAdp: Successfully started.
[ 23.085858] VBoxPciLinuxInit
[ 23.093887] vboxpci: IOMMU not found (not registered)
[ 25.611962] Bluetooth: RFCOMM TTY layer initialized
[ 25.611967] Bluetooth: RFCOMM socket layer initialized
[ 25.611972] Bluetooth: RFCOMM ver 1.11